---
_id: '9541'
abstract:
- lang: eng
text: Piezoelectric transformers are increasingly getting popular in the electrical
devices owing to several advantages such as small size, high efficiency, no electromagnetic
noise and non-flammable. In addition to the conventional applications such as
ballast for back light inverter in notebook computers, camera flash, and fuel
ignition several new applications have emerged such as AC/DC converter, battery
charger and automobile lighting. These new applications demand high power density
and wide range of voltage gain. Currently, the transformer power density is limited
to $40 W/cm{^3}$ obtained at low voltage gain. The purpose of this study was to
investigate a transformer design that has the potential of providing higher power
density and wider range of voltage gain. The new transformer design utilizes radial
mode both at the input and output port and has the unidirectional polarization
in the ceramics. This design was found to provide 30 W power with an efficiency
of 98\% and 30 $\,^{\circ}$C temperature rise from the room temperature. An electro-mechanical
equivalent circuit model was developed to describe the characteristics of the
piezoelectric transformer. The model was found to successfully predict the characteristics
of the transformer. Excellent matching was found between the computed and experimental
results. The results of this study will allow to deterministically design unipoled
piezoelectric transformers with specified performance. It is expected that in
near future the unipoled transformer will gain significant importance in various
electrical components.
author:
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
- first_name: S
full_name: Priya, S
last_name: Priya
citation:
ama: Hemsel T, Priya S. Model based analysis of piezoelectric transformers. Ultrasonics.
2006;44, Supplement(0):e741-e745. doi:10.1016/j.ultras.2006.05.086
apa: Hemsel, T., & Priya, S. (2006). Model based analysis of piezoelectric transformers.
Ultrasonics, 44, Supplement(0), e741–e745. https://doi.org/10.1016/j.ultras.2006.05.086
bibtex: '@article{Hemsel_Priya_2006, title={Model based analysis of piezoelectric
transformers}, volume={44, Supplement}, DOI={10.1016/j.ultras.2006.05.086},
number={0}, journal={Ultrasonics}, author={Hemsel, Tobias and Priya, S}, year={2006},
pages={e741–e745} }'
chicago: 'Hemsel, Tobias, and S Priya. “Model Based Analysis of Piezoelectric Transformers.”
Ultrasonics 44, Supplement, no. 0 (2006): e741–45. https://doi.org/10.1016/j.ultras.2006.05.086.'
ieee: T. Hemsel and S. Priya, “Model based analysis of piezoelectric transformers,”
Ultrasonics, vol. 44, Supplement, no. 0, pp. e741–e745, 2006.
mla: Hemsel, Tobias, and S. Priya. “Model Based Analysis of Piezoelectric Transformers.”
Ultrasonics, vol. 44, Supplement, no. 0, 2006, pp. e741–45, doi:10.1016/j.ultras.2006.05.086.
short: T. Hemsel, S. Priya, Ultrasonics 44, Supplement (2006) e741–e745.
date_created: 2019-04-29T09:22:21Z
date_updated: 2022-01-06T07:04:16Z
department:
- _id: '151'
doi: 10.1016/j.ultras.2006.05.086
issue: '0'
keyword:
- Piezoelectric transformers
language:
- iso: eng
page: e741 - e745
publication: Ultrasonics
publication_identifier:
issn:
- 0041-624X
quality_controlled: '1'
status: public
title: Model based analysis of piezoelectric transformers
type: journal_article
user_id: '55222'
volume: 44, Supplement
year: '2006'
...
---
_id: '9542'
author:
- first_name: Adolf
full_name: Hofmeisterro, Adolf
last_name: Hofmeisterro
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
- first_name: Otto
full_name: Röschel, Otto
last_name: Röschel
citation:
ama: 'Hofmeisterro A, Sextro W, Röschel O. Error-Workspace Analysis of Plane Mechanisms.
In: Proceedings of EUCOMES, the First European Conference on Mechanism Science.
Obergurgl, {\"O}sterreich; 2006:1-12.'
apa: Hofmeisterro, A., Sextro, W., & Röschel, O. (2006). Error-Workspace Analysis
of Plane Mechanisms. In Proceedings of EUCOMES, the first European Conference
on Mechanism Science (pp. 1–12). Obergurgl, {\"O}sterreich.
bibtex: '@inproceedings{Hofmeisterro_Sextro_Röschel_2006, place={Obergurgl, {\"O}sterreich},
title={Error-Workspace Analysis of Plane Mechanisms}, booktitle={Proceedings of
EUCOMES, the first European Conference on Mechanism Science}, author={Hofmeisterro,
Adolf and Sextro, Walter and Röschel, Otto}, year={2006}, pages={1–12} }'
chicago: Hofmeisterro, Adolf, Walter Sextro, and Otto Röschel. “Error-Workspace
Analysis of Plane Mechanisms.” In Proceedings of EUCOMES, the First European
Conference on Mechanism Science, 1–12. Obergurgl, {\"O}sterreich, 2006.
ieee: A. Hofmeisterro, W. Sextro, and O. Röschel, “Error-Workspace Analysis of Plane
Mechanisms,” in Proceedings of EUCOMES, the first European Conference on Mechanism
Science, 2006, pp. 1–12.
mla: Hofmeisterro, Adolf, et al. “Error-Workspace Analysis of Plane Mechanisms.”
Proceedings of EUCOMES, the First European Conference on Mechanism Science,
2006, pp. 1–12.
short: 'A. Hofmeisterro, W. Sextro, O. Röschel, in: Proceedings of EUCOMES, the
First European Conference on Mechanism Science, Obergurgl, {\"O}sterreich, 2006,
pp. 1–12.'
date_created: 2019-04-29T09:25:17Z
date_updated: 2022-01-06T07:04:16Z
department:
- _id: '151'
language:
- iso: eng
page: 1-12
place: Obergurgl, {\"O}sterreich
publication: Proceedings of EUCOMES, the first European Conference on Mechanism Science
status: public
title: Error-Workspace Analysis of Plane Mechanisms
type: conference
user_id: '55222'
year: '2006'
...
---
_id: '9543'
abstract:
- lang: eng
text: An improved concept for ultrasonic hyperthermia of tumors is presented. This
concept is based on past experience of a German government supported project [1],
which ended in 1984. It offers a low cost alternative to common RF- and microwave
methods for hyperthermia of tumors with volumes between 1 and 40 ml at treatment
times between 30 and 60 min. Our new version of the system considerably improves
the temperature suppression in the healthy tissue around the target area and enables
the adjustment of the beam width to the actual tumor size and the field geometry
to the depth and shape of the tumor. The applicator can be used for moderate hyperthermia
with tissue overheating up to 10 K or for ablation therapy with short high temperature
pulses. Its central area is free for the integration of a commercial ultrasonic
diagnostic sector scanner or a Doppler flow sensor in order to support the adjustment
of the transducer and to monitor the whole area during the therapy.
author:
- first_name: E.G.
full_name: Lierke, E.G.
last_name: Lierke
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
citation:
ama: Lierke EG, Hemsel T. Focusing cross-fire applicator for ultrasonic hyperthermia
of tumors. Ultrasonics. 2006;44, Supplement:e341-e344. doi:10.1016/j.ultras.2006.07.004
apa: Lierke, E. G., & Hemsel, T. (2006). Focusing cross-fire applicator for
ultrasonic hyperthermia of tumors. Ultrasonics, 44, Supplement,
e341–e344. https://doi.org/10.1016/j.ultras.2006.07.004
bibtex: '@article{Lierke_Hemsel_2006, title={Focusing cross-fire applicator for
ultrasonic hyperthermia of tumors}, volume={44, Supplement}, DOI={10.1016/j.ultras.2006.07.004},
journal={Ultrasonics}, author={Lierke, E.G. and Hemsel, Tobias}, year={2006},
pages={e341–e344} }'
chicago: 'Lierke, E.G., and Tobias Hemsel. “Focusing Cross-Fire Applicator for Ultrasonic
Hyperthermia of Tumors.” Ultrasonics 44, Supplement (2006): e341–44. https://doi.org/10.1016/j.ultras.2006.07.004.'
ieee: E. G. Lierke and T. Hemsel, “Focusing cross-fire applicator for ultrasonic
hyperthermia of tumors,” Ultrasonics, vol. 44, Supplement, pp. e341–e344,
2006.
mla: Lierke, E. G., and Tobias Hemsel. “Focusing Cross-Fire Applicator for Ultrasonic
Hyperthermia of Tumors.” Ultrasonics, vol. 44, Supplement, 2006, pp. e341–44,
doi:10.1016/j.ultras.2006.07.004.
short: E.G. Lierke, T. Hemsel, Ultrasonics 44, Supplement (2006) e341–e344.
date_created: 2019-04-29T09:27:27Z
date_updated: 2022-01-06T07:04:16Z
department:
- _id: '151'
doi: 10.1016/j.ultras.2006.07.004
keyword:
- Moderate hyperthermia
language:
- iso: eng
page: e341 - e344
publication: Ultrasonics
publication_identifier:
issn:
- 0041-624X
quality_controlled: '1'
status: public
title: Focusing cross-fire applicator for ultrasonic hyperthermia of tumors
type: journal_article
user_id: '55222'
volume: 44, Supplement
year: '2006'
...
---
_id: '9544'
author:
- first_name: Ernst-Günter
full_name: Lierke, Ernst-Günter
last_name: Lierke
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
citation:
ama: 'Lierke E-G, Hemsel T. Focussing Cross-Fire Applicator for Ultrasonic Hyperthermia
of Tumors. In: Proceedings of 2nd International Workshop on Piezoelectric Materials
and Applications in Actuators. HNI Verlagsschriftenreihe. Paderborn, Germany;
2006:215-222.'
apa: Lierke, E.-G., & Hemsel, T. (2006). Focussing Cross-Fire Applicator for
Ultrasonic Hyperthermia of Tumors. In Proceedings of 2nd International Workshop
on Piezoelectric Materials and Applications in Actuators (pp. 215–222). Paderborn,
Germany.
bibtex: '@inproceedings{Lierke_Hemsel_2006, place={Paderborn, Germany}, series={HNI
Verlagsschriftenreihe}, title={Focussing Cross-Fire Applicator for Ultrasonic
Hyperthermia of Tumors}, number={Band 180}, booktitle={Proceedings of 2nd International
Workshop on Piezoelectric Materials and Applications in Actuators}, author={Lierke,
Ernst-Günter and Hemsel, Tobias}, year={2006}, pages={215–222}, collection={HNI
Verlagsschriftenreihe} }'
chicago: Lierke, Ernst-Günter, and Tobias Hemsel. “Focussing Cross-Fire Applicator
for Ultrasonic Hyperthermia of Tumors.” In Proceedings of 2nd International
Workshop on Piezoelectric Materials and Applications in Actuators, 215–22.
HNI Verlagsschriftenreihe. Paderborn, Germany, 2006.
ieee: E.-G. Lierke and T. Hemsel, “Focussing Cross-Fire Applicator for Ultrasonic
Hyperthermia of Tumors,” in Proceedings of 2nd International Workshop on Piezoelectric
Materials and Applications in Actuators, 2006, no. Band 180, pp. 215–222.
mla: Lierke, Ernst-Günter, and Tobias Hemsel. “Focussing Cross-Fire Applicator for
Ultrasonic Hyperthermia of Tumors.” Proceedings of 2nd International Workshop
on Piezoelectric Materials and Applications in Actuators, no. Band 180, 2006,
pp. 215–22.
short: 'E.-G. Lierke, T. Hemsel, in: Proceedings of 2nd International Workshop on
Piezoelectric Materials and Applications in Actuators, Paderborn, Germany, 2006,
pp. 215–222.'
date_created: 2019-04-29T09:29:01Z
date_updated: 2022-01-06T07:04:16Z
department:
- _id: '151'
issue: Band 180
language:
- iso: eng
page: 215-222
place: Paderborn, Germany
publication: Proceedings of 2nd International Workshop on Piezoelectric Materials
and Applications in Actuators
series_title: HNI Verlagsschriftenreihe
status: public
title: Focussing Cross-Fire Applicator for Ultrasonic Hyperthermia of Tumors
type: conference
user_id: '55222'
year: '2006'
...
---
_id: '9545'
author:
- first_name: B
full_name: Mracek, B
last_name: Mracek
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
- first_name: Maik
full_name: Mracek, Maik
last_name: Mracek
citation:
ama: 'Mracek B, Hemsel T, Mracek M. Powder Transport by Ultrasonic Waves. In: Proceedings
of 2nd International Workshop on Piezoelectric Materials and Applications in Actuators.
HNI Verlagsschriftenreihe. Paderborn, Germany; 2006:177-182.'
apa: Mracek, B., Hemsel, T., & Mracek, M. (2006). Powder Transport by Ultrasonic
Waves. In Proceedings of 2nd International Workshop on Piezoelectric Materials
and Applications in Actuators (pp. 177–182). Paderborn, Germany.
bibtex: '@inproceedings{Mracek_Hemsel_Mracek_2006, place={Paderborn, Germany}, series={HNI
Verlagsschriftenreihe}, title={Powder Transport by Ultrasonic Waves}, number={Band
180}, booktitle={Proceedings of 2nd International Workshop on Piezoelectric Materials
and Applications in Actuators}, author={Mracek, B and Hemsel, Tobias and Mracek,
Maik}, year={2006}, pages={177–182}, collection={HNI Verlagsschriftenreihe} }'
chicago: Mracek, B, Tobias Hemsel, and Maik Mracek. “Powder Transport by Ultrasonic
Waves.” In Proceedings of 2nd International Workshop on Piezoelectric Materials
and Applications in Actuators, 177–82. HNI Verlagsschriftenreihe. Paderborn,
Germany, 2006.
ieee: B. Mracek, T. Hemsel, and M. Mracek, “Powder Transport by Ultrasonic Waves,”
in Proceedings of 2nd International Workshop on Piezoelectric Materials and
Applications in Actuators, 2006, no. Band 180, pp. 177–182.
mla: Mracek, B., et al. “Powder Transport by Ultrasonic Waves.” Proceedings of
2nd International Workshop on Piezoelectric Materials and Applications in Actuators,
no. Band 180, 2006, pp. 177–82.
short: 'B. Mracek, T. Hemsel, M. Mracek, in: Proceedings of 2nd International Workshop
on Piezoelectric Materials and Applications in Actuators, Paderborn, Germany,
2006, pp. 177–182.'
date_created: 2019-04-29T09:31:58Z
date_updated: 2022-01-06T07:04:16Z
department:
- _id: '151'
issue: Band 180
language:
- iso: eng
page: 177-182
place: Paderborn, Germany
publication: Proceedings of 2nd International Workshop on Piezoelectric Materials
and Applications in Actuators
series_title: HNI Verlagsschriftenreihe
status: public
title: Powder Transport by Ultrasonic Waves
type: conference
user_id: '55222'
year: '2006'
...
---
_id: '9546'
abstract:
- lang: eng
text: Rotary ultrasonic motors have found broad industrial application in camera
lens drives and other systems. Linear ultrasonic motors in contrast have only
found limited applications. The main reason for the limited range of application
of these very attractive devices seems to be their small force and power range.
Attempts to build linear ultrasonic motors for high forces and high power applications
have not been truly successful yet. To achieve larger force and higher power,
multiple miniaturized motors can be combined. This approach, however, is not as
simple as it appears at first glance. The electromechanical behaviour of the individual
motors differs slightly due to manufacturing and assembly tolerances. The individual
motor characteristics are strongly dependent on the driving parameters (frequency,
voltage, temperature, pre-stress, etc.) and the driven load and the collective
behaviour of the swarm of motors is not just the linear superposition of the individual
drive's forces. Thus, the bundle of motors has to be synchronized and controlled
appropriately in order to obtain an optimized drive that is not oversized and
costly. We have investigated driving and control strategies of a set of linear
ultrasonic motors. Our contribution will be divided into three main parts. In
part I ultrasonic linear motors will be introduced. In part II driving strategies
for a single motor as well as for a bundle of motors will be presented. These
concepts will be verified by simulation results and experimental data. In part
III a simplified model for the motor's electromechanical behaviour will be given.
author:
- first_name: Maik
full_name: Mracek, Maik
last_name: Mracek
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
citation:
ama: Mracek M, Hemsel T. Synergetic driving concepts for bundled miniature ultrasonic
linear motors. Ultrasonics. 2006;44, Supplement:e597-e602. doi:10.1016/j.ultras.2006.05.201
apa: Mracek, M., & Hemsel, T. (2006). Synergetic driving concepts for bundled
miniature ultrasonic linear motors. Ultrasonics, 44, Supplement,
e597–e602. https://doi.org/10.1016/j.ultras.2006.05.201
bibtex: '@article{Mracek_Hemsel_2006, title={Synergetic driving concepts for bundled
miniature ultrasonic linear motors}, volume={44, Supplement}, DOI={10.1016/j.ultras.2006.05.201},
journal={Ultrasonics}, author={Mracek, Maik and Hemsel, Tobias}, year={2006},
pages={e597–e602} }'
chicago: 'Mracek, Maik, and Tobias Hemsel. “Synergetic Driving Concepts for Bundled
Miniature Ultrasonic Linear Motors.” Ultrasonics 44, Supplement (2006):
e597–602. https://doi.org/10.1016/j.ultras.2006.05.201.'
ieee: M. Mracek and T. Hemsel, “Synergetic driving concepts for bundled miniature
ultrasonic linear motors,” Ultrasonics, vol. 44, Supplement, pp. e597–e602,
2006.
mla: Mracek, Maik, and Tobias Hemsel. “Synergetic Driving Concepts for Bundled Miniature
Ultrasonic Linear Motors.” Ultrasonics, vol. 44, Supplement, 2006, pp.
e597–602, doi:10.1016/j.ultras.2006.05.201.
short: M. Mracek, T. Hemsel, Ultrasonics 44, Supplement (2006) e597–e602.
date_created: 2019-04-29T09:34:16Z
date_updated: 2022-01-06T07:04:16Z
department:
- _id: '151'
doi: 10.1016/j.ultras.2006.05.201
keyword:
- Ultrasonic linear motor
language:
- iso: eng
page: e597 - e602
publication: Ultrasonics
publication_identifier:
issn:
- 0041-624X
quality_controlled: '1'
status: public
title: Synergetic driving concepts for bundled miniature ultrasonic linear motors
type: journal_article
user_id: '55222'
volume: 44, Supplement
year: '2006'
...
---
_id: '9547'
author:
- first_name: Maik
full_name: Mracek, Maik
last_name: Mracek
- first_name: Piotr
full_name: Vasiljev, Piotr
last_name: Vasiljev
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
- first_name: Jörg
full_name: Wallaschek, Jörg
last_name: Wallaschek
citation:
ama: Mracek M, Vasiljev P, Hemsel T, Wallaschek J. Self configuration of a novel
miniature ultrasonic linear motor. Solid State Phenomena. 2006;113:167-172.
apa: Mracek, M., Vasiljev, P., Hemsel, T., & Wallaschek, J. (2006). Self configuration
of a novel miniature ultrasonic linear motor. Solid State Phenomena, 113,
167–172.
bibtex: '@article{Mracek_Vasiljev_Hemsel_Wallaschek_2006, title={Self configuration
of a novel miniature ultrasonic linear motor}, volume={113}, journal={Solid State
Phenomena}, publisher={Trans Tech Publ}, author={Mracek, Maik and Vasiljev, Piotr
and Hemsel, Tobias and Wallaschek, Jörg}, year={2006}, pages={167–172} }'
chicago: 'Mracek, Maik, Piotr Vasiljev, Tobias Hemsel, and Jörg Wallaschek. “Self
Configuration of a Novel Miniature Ultrasonic Linear Motor.” Solid State Phenomena
113 (2006): 167–72.'
ieee: M. Mracek, P. Vasiljev, T. Hemsel, and J. Wallaschek, “Self configuration
of a novel miniature ultrasonic linear motor,” Solid State Phenomena, vol.
113, pp. 167–172, 2006.
mla: Mracek, Maik, et al. “Self Configuration of a Novel Miniature Ultrasonic Linear
Motor.” Solid State Phenomena, vol. 113, Trans Tech Publ, 2006, pp. 167–72.
short: M. Mracek, P. Vasiljev, T. Hemsel, J. Wallaschek, Solid State Phenomena 113
(2006) 167–172.
date_created: 2019-04-29T09:35:31Z
date_updated: 2022-01-06T07:04:16Z
department:
- _id: '151'
intvolume: ' 113'
language:
- iso: eng
page: 167-172
publication: Solid State Phenomena
publisher: Trans Tech Publ
quality_controlled: '1'
status: public
title: Self configuration of a novel miniature ultrasonic linear motor
type: journal_article
user_id: '55222'
volume: 113
year: '2006'
...
---
_id: '9548'
abstract:
- lang: eng
text: This paper presents a general model based on the electromechanical circuit
theory. The model is set up as a mechanical equivalent model for base excited
systems and describes the behaviour of a piezoelectric element around one resonance
frequency which is sufficient for most practical applications. The model is extended
to obtain the influence of geometrical and material properties. The derivated
properties are used to describe the parameters of the general model which is easy
to handle. Using this model either the calculation of the output power on a specific
electric load or the determination of the design of the used piezoelectric element
for a needed electric output power is possible. The paper focuses on the design
of the ratio of length and width of a piezoelectric bimorph. The validity of the
model is shown by the comparison of computed and experimental results.
author:
- first_name: Björn
full_name: Richter, Björn
last_name: Richter
- first_name: Jens
full_name: Twiefel, Jens
last_name: Twiefel
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
- first_name: Jörg
full_name: Wallaschek, Jörg
last_name: Wallaschek
citation:
ama: 'Richter B, Twiefel J, Hemsel T, Wallaschek J. Model based design of piezoelectric
generators utilizing geometrical and material properties. In: ASME 2006 International
Mechanical Engineering Congress and Exposition. Chicago, Illinois, USA; 2006.
doi:doi:10.1115/IMECE2006-14862'
apa: Richter, B., Twiefel, J., Hemsel, T., & Wallaschek, J. (2006). Model based
design of piezoelectric generators utilizing geometrical and material properties.
In ASME 2006 International Mechanical Engineering Congress and Exposition.
Chicago, Illinois, USA. https://doi.org/doi:10.1115/IMECE2006-14862
bibtex: '@inproceedings{Richter_Twiefel_Hemsel_Wallaschek_2006, place={Chicago,
Illinois, USA}, title={Model based design of piezoelectric generators utilizing
geometrical and material properties}, DOI={doi:10.1115/IMECE2006-14862},
booktitle={ASME 2006 International Mechanical Engineering Congress and Exposition},
author={Richter, Björn and Twiefel, Jens and Hemsel, Tobias and Wallaschek, Jörg},
year={2006} }'
chicago: Richter, Björn, Jens Twiefel, Tobias Hemsel, and Jörg Wallaschek. “Model
Based Design of Piezoelectric Generators Utilizing Geometrical and Material Properties.”
In ASME 2006 International Mechanical Engineering Congress and Exposition.
Chicago, Illinois, USA, 2006. https://doi.org/doi:10.1115/IMECE2006-14862.
ieee: B. Richter, J. Twiefel, T. Hemsel, and J. Wallaschek, “Model based design
of piezoelectric generators utilizing geometrical and material properties,” in
ASME 2006 International Mechanical Engineering Congress and Exposition,
2006.
mla: Richter, Björn, et al. “Model Based Design of Piezoelectric Generators Utilizing
Geometrical and Material Properties.” ASME 2006 International Mechanical Engineering
Congress and Exposition, 2006, doi:doi:10.1115/IMECE2006-14862.
short: 'B. Richter, J. Twiefel, T. Hemsel, J. Wallaschek, in: ASME 2006 International
Mechanical Engineering Congress and Exposition, Chicago, Illinois, USA, 2006.'
date_created: 2019-04-29T09:37:45Z
date_updated: 2022-01-06T07:04:16Z
department:
- _id: '151'
doi: doi:10.1115/IMECE2006-14862
keyword:
- Materials properties
- Design
- Generators
language:
- iso: eng
place: Chicago, Illinois, USA
publication: ASME 2006 International Mechanical Engineering Congress and Exposition
quality_controlled: '1'
status: public
title: Model based design of piezoelectric generators utilizing geometrical and material
properties
type: conference
user_id: '55222'
year: '2006'
...
---
_id: '9549'
author:
- first_name: Florian
full_name: Schiedeck, Florian
last_name: Schiedeck
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
citation:
ama: 'Schiedeck F, Hemsel T. Comparison of Piezoelectric and Shape Memory Alloy
Based Actuators. In: Proceedings of 2nd International Workshop on Piezoelectric
Materials and Applications in Actuators. HNI Verlagsschriftenreihe. Paderborn,
Germany; 2006:239-242.'
apa: Schiedeck, F., & Hemsel, T. (2006). Comparison of Piezoelectric and Shape
Memory Alloy Based Actuators. In Proceedings of 2nd International Workshop
on Piezoelectric Materials and Applications in Actuators (pp. 239–242). Paderborn,
Germany.
bibtex: '@inproceedings{Schiedeck_Hemsel_2006, place={Paderborn, Germany}, series={HNI
Verlagsschriftenreihe}, title={Comparison of Piezoelectric and Shape Memory Alloy
Based Actuators}, number={Band 180}, booktitle={Proceedings of 2nd International
Workshop on Piezoelectric Materials and Applications in Actuators}, author={Schiedeck,
Florian and Hemsel, Tobias}, year={2006}, pages={239–242}, collection={HNI Verlagsschriftenreihe}
}'
chicago: Schiedeck, Florian, and Tobias Hemsel. “Comparison of Piezoelectric and
Shape Memory Alloy Based Actuators.” In Proceedings of 2nd International Workshop
on Piezoelectric Materials and Applications in Actuators, 239–42. HNI Verlagsschriftenreihe.
Paderborn, Germany, 2006.
ieee: F. Schiedeck and T. Hemsel, “Comparison of Piezoelectric and Shape Memory
Alloy Based Actuators,” in Proceedings of 2nd International Workshop on Piezoelectric
Materials and Applications in Actuators, 2006, no. Band 180, pp. 239–242.
mla: Schiedeck, Florian, and Tobias Hemsel. “Comparison of Piezoelectric and Shape
Memory Alloy Based Actuators.” Proceedings of 2nd International Workshop on
Piezoelectric Materials and Applications in Actuators, no. Band 180, 2006,
pp. 239–42.
short: 'F. Schiedeck, T. Hemsel, in: Proceedings of 2nd International Workshop on
Piezoelectric Materials and Applications in Actuators, Paderborn, Germany, 2006,
pp. 239–242.'
date_created: 2019-04-29T09:39:25Z
date_updated: 2022-01-06T07:04:16Z
department:
- _id: '151'
issue: Band 180
language:
- iso: eng
page: 239-242
place: Paderborn, Germany
publication: Proceedings of 2nd International Workshop on Piezoelectric Materials
and Applications in Actuators
series_title: HNI Verlagsschriftenreihe
status: public
title: Comparison of Piezoelectric and Shape Memory Alloy Based Actuators
type: conference
user_id: '55222'
year: '2006'
...
---
_id: '9550'
author:
- first_name: Florian
full_name: Schiedeck, Florian
last_name: Schiedeck
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
- first_name: Jörg
full_name: Wallaschek, Jörg
last_name: Wallaschek
citation:
ama: Schiedeck F, Hemsel T, Wallaschek J. The use of shape memory alloy wires in
actuators. Solid State Phenomena. 2006;113:195-198.
apa: Schiedeck, F., Hemsel, T., & Wallaschek, J. (2006). The use of shape memory
alloy wires in actuators. Solid State Phenomena, 113, 195–198.
bibtex: '@article{Schiedeck_Hemsel_Wallaschek_2006, title={The use of shape memory
alloy wires in actuators}, volume={113}, journal={Solid State Phenomena}, publisher={Trans
Tech Publ}, author={Schiedeck, Florian and Hemsel, Tobias and Wallaschek, Jörg},
year={2006}, pages={195–198} }'
chicago: 'Schiedeck, Florian, Tobias Hemsel, and Jörg Wallaschek. “The Use of Shape
Memory Alloy Wires in Actuators.” Solid State Phenomena 113 (2006): 195–98.'
ieee: F. Schiedeck, T. Hemsel, and J. Wallaschek, “The use of shape memory alloy
wires in actuators,” Solid State Phenomena, vol. 113, pp. 195–198, 2006.
mla: Schiedeck, Florian, et al. “The Use of Shape Memory Alloy Wires in Actuators.”
Solid State Phenomena, vol. 113, Trans Tech Publ, 2006, pp. 195–98.
short: F. Schiedeck, T. Hemsel, J. Wallaschek, Solid State Phenomena 113 (2006)
195–198.
date_created: 2019-04-29T09:40:50Z
date_updated: 2022-01-06T07:04:16Z
department:
- _id: '151'
intvolume: ' 113'
language:
- iso: eng
page: 195-198
publication: Solid State Phenomena
publisher: Trans Tech Publ
quality_controlled: '1'
status: public
title: The use of shape memory alloy wires in actuators
type: journal_article
user_id: '55222'
volume: 113
year: '2006'
...
---
_id: '9551'
abstract:
- lang: eng
text: Friction occurs in the contact between tyre and road. The friction of rubber
material on dry surfaces is dominated by hysteresis and adhesion effects. Hysterisis
friction is characterised by the energy dissipation within the visco-elastic material,
which is caused by its deformation while passing the surface roughness. Hysteresis
effects are modelled by an extended linear visco-elastic material with several
Maxwell elements. The development of a model in the time domain allows to consider
nonlinear effects. Additionally temperature effects are taken into account based
on the WLF-transformation. Adhesion forces originate from molecular bindings between
the contact partners. This effect is simulated by applying a modified model of
Achenbach on real surfaces. The temperature distribution within the friction contact
region is investigated experimentally as well. Furthermore global stick-slip vibrations
of a rubber block element are investigated using a global contact model. Numerical
results are compared with experiments performed on a tribometer test rig.
author:
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
- first_name: Patrick
full_name: Moldenhauer, Patrick
last_name: Moldenhauer
- first_name: M
full_name: Wangenheim, M
last_name: Wangenheim
- first_name: Markus
full_name: Lindner, Markus
last_name: Lindner
- first_name: Matthias
full_name: Kröger, Matthias
last_name: Kröger
citation:
ama: 'Sextro W, Moldenhauer P, Wangenheim M, Lindner M, Kröger M. Contact behaviour
of a sliding rubber element. In: Wriggers P, Nackenhorst U, eds. Analysis and
Simulation of Contact Problems. Vol 27. Lecture Notes in Applied and Computational
Mechanics. Springer Berlin Heidelberg; 2006:243-252. doi:10.1007/3-540-31761-9_27'
apa: Sextro, W., Moldenhauer, P., Wangenheim, M., Lindner, M., & Kröger, M.
(2006). Contact behaviour of a sliding rubber element. In P. Wriggers & U.
Nackenhorst (Eds.), Analysis and Simulation of Contact Problems (Vol. 27,
pp. 243–252). Springer Berlin Heidelberg. https://doi.org/10.1007/3-540-31761-9_27
bibtex: '@inbook{Sextro_Moldenhauer_Wangenheim_Lindner_Kröger_2006, series={Lecture
Notes in Applied and Computational Mechanics}, title={Contact behaviour of a sliding
rubber element}, volume={27}, DOI={10.1007/3-540-31761-9_27},
booktitle={Analysis and Simulation of Contact Problems}, publisher={Springer Berlin
Heidelberg}, author={Sextro, Walter and Moldenhauer, Patrick and Wangenheim, M
and Lindner, Markus and Kröger, Matthias}, editor={Wriggers, Peter and Nackenhorst,
UdoEditors}, year={2006}, pages={243–252}, collection={Lecture Notes in Applied
and Computational Mechanics} }'
chicago: Sextro, Walter, Patrick Moldenhauer, M Wangenheim, Markus Lindner, and
Matthias Kröger. “Contact Behaviour of a Sliding Rubber Element.” In Analysis
and Simulation of Contact Problems, edited by Peter Wriggers and Udo Nackenhorst,
27:243–52. Lecture Notes in Applied and Computational Mechanics. Springer Berlin
Heidelberg, 2006. https://doi.org/10.1007/3-540-31761-9_27.
ieee: W. Sextro, P. Moldenhauer, M. Wangenheim, M. Lindner, and M. Kröger, “Contact
behaviour of a sliding rubber element,” in Analysis and Simulation of Contact
Problems, vol. 27, P. Wriggers and U. Nackenhorst, Eds. Springer Berlin Heidelberg,
2006, pp. 243–252.
mla: Sextro, Walter, et al. “Contact Behaviour of a Sliding Rubber Element.” Analysis
and Simulation of Contact Problems, edited by Peter Wriggers and Udo Nackenhorst,
vol. 27, Springer Berlin Heidelberg, 2006, pp. 243–52, doi:10.1007/3-540-31761-9_27.
short: 'W. Sextro, P. Moldenhauer, M. Wangenheim, M. Lindner, M. Kröger, in: P.
Wriggers, U. Nackenhorst (Eds.), Analysis and Simulation of Contact Problems,
Springer Berlin Heidelberg, 2006, pp. 243–252.'
date_created: 2019-04-29T09:42:01Z
date_updated: 2022-01-06T07:04:16Z
department:
- _id: '151'
doi: 10.1007/3-540-31761-9_27
editor:
- first_name: Peter
full_name: Wriggers, Peter
last_name: Wriggers
- first_name: Udo
full_name: Nackenhorst, Udo
last_name: Nackenhorst
intvolume: ' 27'
language:
- iso: eng
page: 243-252
publication: Analysis and Simulation of Contact Problems
publication_identifier:
isbn:
- 978-3-540-31760-9
publisher: Springer Berlin Heidelberg
series_title: Lecture Notes in Applied and Computational Mechanics
status: public
title: Contact behaviour of a sliding rubber element
type: book_chapter
user_id: '55222'
volume: 27
year: '2006'
...
---
_id: '9552'
author:
- first_name: Jens
full_name: Twiefel, Jens
last_name: Twiefel
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
- first_name: Christopher
full_name: Kauczor, Christopher
last_name: Kauczor
citation:
ama: 'Twiefel J, Hemsel T, Kauczor C. Energy harvesting with piezoelectric Elements.
In: Proceedings of 2nd International Workshop on Piezoelectric Materials and
Applications in Actuators. HNI Verlagsschriftenreihe. Paderborn, Germany;
2006:207-212.'
apa: Twiefel, J., Hemsel, T., & Kauczor, C. (2006). Energy harvesting with piezoelectric
Elements. In Proceedings of 2nd International Workshop on Piezoelectric Materials
and Applications in Actuators (pp. 207–212). Paderborn, Germany.
bibtex: '@inproceedings{Twiefel_Hemsel_Kauczor_2006, place={Paderborn, Germany},
series={HNI Verlagsschriftenreihe}, title={Energy harvesting with piezoelectric
Elements}, number={Band 180}, booktitle={Proceedings of 2nd International Workshop
on Piezoelectric Materials and Applications in Actuators}, author={Twiefel, Jens
and Hemsel, Tobias and Kauczor, Christopher}, year={2006}, pages={207–212}, collection={HNI
Verlagsschriftenreihe} }'
chicago: Twiefel, Jens, Tobias Hemsel, and Christopher Kauczor. “Energy Harvesting
with Piezoelectric Elements.” In Proceedings of 2nd International Workshop
on Piezoelectric Materials and Applications in Actuators, 207–12. HNI Verlagsschriftenreihe.
Paderborn, Germany, 2006.
ieee: J. Twiefel, T. Hemsel, and C. Kauczor, “Energy harvesting with piezoelectric
Elements,” in Proceedings of 2nd International Workshop on Piezoelectric Materials
and Applications in Actuators, 2006, no. Band 180, pp. 207–212.
mla: Twiefel, Jens, et al. “Energy Harvesting with Piezoelectric Elements.” Proceedings
of 2nd International Workshop on Piezoelectric Materials and Applications in Actuators,
no. Band 180, 2006, pp. 207–12.
short: 'J. Twiefel, T. Hemsel, C. Kauczor, in: Proceedings of 2nd International
Workshop on Piezoelectric Materials and Applications in Actuators, Paderborn,
Germany, 2006, pp. 207–212.'
date_created: 2019-04-29T09:43:30Z
date_updated: 2022-01-06T07:04:16Z
department:
- _id: '151'
issue: Band 180
language:
- iso: eng
page: 207-212
place: Paderborn, Germany
publication: Proceedings of 2nd International Workshop on Piezoelectric Materials
and Applications in Actuators
series_title: HNI Verlagsschriftenreihe
status: public
title: Energy harvesting with piezoelectric Elements
type: conference
user_id: '55222'
year: '2006'
...
---
_id: '9553'
abstract:
- lang: eng
text: 'In the design process of energy harvesting systems based on piezoelectric
elements, achievable energy output is the most interesting factor. To estimate
this amount a priori manufacturing of prototypes a mathematical model is very
helpful. Within this contribution we will introduce a model based on electro-mechanical
circuit theory. Its parameters are identified by measurements and the model is
validated by comparison to experimental results. The model is designed to support
the development-engineer in the dimensioning of energy harvesting units to specific
application demands. Two main challenges in device design are investigated with
the mathematical model: influence of the ambient excitation frequency, and influence
of the load impedance. Typically, the equivalent model approach delivers models
for piezoelectric elements that are driven in resonance by electrical excitation.
In the case of energy harvesting the piezoelectric elements are excited mechanically
and most often non-resonant. Thus, we first set up a mechanical equivalent model
for base excited systems. In first approximation it represents an energy harvesting
unit around one resonance frequency. The model is expandable for a wider frequency
range using the superpositioning of multiple circuits. From the viewpoint of optimum
energy transformation between mechanical and electrical energy it is favorable
to drive piezoelectric elements at resonance or anti-resonance. Thus, an energy
harvesting system should be tuned to the excitation frequency.'
citation:
ama: Twiefel J, Richter B, Hemsel T, Wallaschek J, eds. Model-Based Design of
Piezoelectric Energy Harvesting Systems. Vol 6169.; 2006:616909-616909-616910.
doi:10.1117/12.658623
apa: Twiefel, J., Richter, B., Hemsel, T., & Wallaschek, J. (Eds.). (2006).
Model-based design of piezoelectric energy harvesting systems (Vol. 6169,
pp. 616909-616909–616910). https://doi.org/10.1117/12.658623
bibtex: '@book{Twiefel_Richter_Hemsel_Wallaschek_2006, title={Model-based design
of piezoelectric energy harvesting systems}, volume={6169}, DOI={10.1117/12.658623},
year={2006}, pages={616909-616909–10} }'
chicago: Twiefel, Jens, Björn Richter, Tobias Hemsel, and Jörg Wallaschek, eds.
Model-Based Design of Piezoelectric Energy Harvesting Systems. Vol. 6169,
2006. https://doi.org/10.1117/12.658623.
ieee: J. Twiefel, B. Richter, T. Hemsel, and J. Wallaschek, Eds., Model-based
design of piezoelectric energy harvesting systems, vol. 6169. 2006, pp. 616909-616909–10.
mla: Twiefel, Jens, et al., editors. Model-Based Design of Piezoelectric Energy
Harvesting Systems. Vol. 6169, 2006, pp. 616909-616909–10, doi:10.1117/12.658623.
short: J. Twiefel, B. Richter, T. Hemsel, J. Wallaschek, eds., Model-Based Design
of Piezoelectric Energy Harvesting Systems, 2006.
date_created: 2019-04-29T09:46:37Z
date_updated: 2022-01-06T07:04:16Z
department:
- _id: '151'
doi: 10.1117/12.658623
editor:
- first_name: Jens
full_name: Twiefel, Jens
last_name: Twiefel
- first_name: Björn
full_name: Richter, Björn
last_name: Richter
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
- first_name: Jörg
full_name: Wallaschek, Jörg
last_name: Wallaschek
intvolume: ' 6169'
language:
- iso: eng
page: 616909-616909-10
status: public
title: Model-based design of piezoelectric energy harvesting systems
type: conference_editor
user_id: '55222'
volume: 6169
year: '2006'
...
---
_id: '9558'
author:
- first_name: S
full_name: Wilmanns, S
last_name: Wilmanns
- first_name: K
full_name: Nakamura, K
last_name: Nakamura
- first_name: Maik
full_name: Mracek, Maik
last_name: Mracek
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
citation:
ama: 'Wilmanns S, Nakamura K, Mracek M, Hemsel T. Non-resonant piezoelectric motors
driven in audible frequency range. In: Proceedings of 2nd International Workshop
on Piezoelectric Materials and Applications in Actuators. Vol Band 180. HNI
Verlagsschriftenreihe. Paderborn, Germany; 2006:205.'
apa: Wilmanns, S., Nakamura, K., Mracek, M., & Hemsel, T. (2006). Non-resonant
piezoelectric motors driven in audible frequency range. In Proceedings of 2nd
International Workshop on Piezoelectric Materials and Applications in Actuators
(Vol. Band 180, p. 205). Paderborn, Germany.
bibtex: '@inproceedings{Wilmanns_Nakamura_Mracek_Hemsel_2006, place={Paderborn,
Germany}, series={HNI Verlagsschriftenreihe}, title={Non-resonant piezoelectric
motors driven in audible frequency range}, volume={Band 180}, booktitle={Proceedings
of 2nd International Workshop on Piezoelectric Materials and Applications in Actuators},
author={Wilmanns, S and Nakamura, K and Mracek, Maik and Hemsel, Tobias}, year={2006},
pages={205}, collection={HNI Verlagsschriftenreihe} }'
chicago: Wilmanns, S, K Nakamura, Maik Mracek, and Tobias Hemsel. “Non-Resonant
Piezoelectric Motors Driven in Audible Frequency Range.” In Proceedings of
2nd International Workshop on Piezoelectric Materials and Applications in Actuators,
Band 180:205. HNI Verlagsschriftenreihe. Paderborn, Germany, 2006.
ieee: S. Wilmanns, K. Nakamura, M. Mracek, and T. Hemsel, “Non-resonant piezoelectric
motors driven in audible frequency range,” in Proceedings of 2nd International
Workshop on Piezoelectric Materials and Applications in Actuators, 2006, vol.
Band 180, p. 205.
mla: Wilmanns, S., et al. “Non-Resonant Piezoelectric Motors Driven in Audible Frequency
Range.” Proceedings of 2nd International Workshop on Piezoelectric Materials
and Applications in Actuators, vol. Band 180, 2006, p. 205.
short: 'S. Wilmanns, K. Nakamura, M. Mracek, T. Hemsel, in: Proceedings of 2nd International
Workshop on Piezoelectric Materials and Applications in Actuators, Paderborn,
Germany, 2006, p. 205.'
date_created: 2019-04-29T09:53:46Z
date_updated: 2022-01-06T07:04:16Z
department:
- _id: '151'
language:
- iso: eng
page: '205'
place: Paderborn, Germany
publication: Proceedings of 2nd International Workshop on Piezoelectric Materials
and Applications in Actuators
series_title: HNI Verlagsschriftenreihe
status: public
title: Non-resonant piezoelectric motors driven in audible frequency range
type: conference
user_id: '55222'
volume: Band 180
year: '2006'
...
---
_id: '9559'
author:
- first_name: W
full_name: Zhou, W
last_name: Zhou
- first_name: Bo
full_name: Fu, Bo
last_name: Fu
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
- first_name: Jörg
full_name: Wallaschek, Jörg
last_name: Wallaschek
citation:
ama: 'Zhou W, Fu B, Hemsel T, Wallaschek J. Piezoelectrics in dental tools. In:
Proceedings of 2nd International Workshop on Piezoelectric Materials and Applications
in Actuators. Vol Band 180. HNI Verlagsschriftenreihe. Paderborn, Germany;
2006:213.'
apa: Zhou, W., Fu, B., Hemsel, T., & Wallaschek, J. (2006). Piezoelectrics in
dental tools. In Proceedings of 2nd International Workshop on Piezoelectric
Materials and Applications in Actuators (Vol. Band 180, p. 213). Paderborn,
Germany.
bibtex: '@inproceedings{Zhou_Fu_Hemsel_Wallaschek_2006, place={Paderborn, Germany},
series={HNI Verlagsschriftenreihe}, title={Piezoelectrics in dental tools}, volume={Band
180}, booktitle={Proceedings of 2nd International Workshop on Piezoelectric Materials
and Applications in Actuators}, author={Zhou, W and Fu, Bo and Hemsel, Tobias
and Wallaschek, Jörg}, year={2006}, pages={213}, collection={HNI Verlagsschriftenreihe}
}'
chicago: Zhou, W, Bo Fu, Tobias Hemsel, and Jörg Wallaschek. “Piezoelectrics in
Dental Tools.” In Proceedings of 2nd International Workshop on Piezoelectric
Materials and Applications in Actuators, Band 180:213. HNI Verlagsschriftenreihe.
Paderborn, Germany, 2006.
ieee: W. Zhou, B. Fu, T. Hemsel, and J. Wallaschek, “Piezoelectrics in dental tools,”
in Proceedings of 2nd International Workshop on Piezoelectric Materials and
Applications in Actuators, 2006, vol. Band 180, p. 213.
mla: Zhou, W., et al. “Piezoelectrics in Dental Tools.” Proceedings of 2nd International
Workshop on Piezoelectric Materials and Applications in Actuators, vol. Band
180, 2006, p. 213.
short: 'W. Zhou, B. Fu, T. Hemsel, J. Wallaschek, in: Proceedings of 2nd International
Workshop on Piezoelectric Materials and Applications in Actuators, Paderborn,
Germany, 2006, p. 213.'
date_created: 2019-04-29T09:57:26Z
date_updated: 2022-01-06T07:04:16Z
department:
- _id: '151'
language:
- iso: eng
page: '213'
place: Paderborn, Germany
publication: Proceedings of 2nd International Workshop on Piezoelectric Materials
and Applications in Actuators
series_title: HNI Verlagsschriftenreihe
status: public
title: Piezoelectrics in dental tools
type: conference
user_id: '55222'
volume: Band 180
year: '2006'
...
---
_id: '7780'
citation:
ama: Pleuß A, Van den Bergh J, Hußmann H, Sauer S, Bödcher A, eds. Proceedings
of the Workshop on Model Driven Development of Advanced User Interfaces, Satellite
of the MoDELS 2006 Conference. Vol 214. CEUR-WS.org; 2006.
apa: Pleuß, A., Van den Bergh, J., Hußmann, H., Sauer, S., & Bödcher, A. (Eds.).
(2006). Proceedings of the Workshop on Model Driven Development of Advanced
User Interfaces, satellite of the MoDELS 2006 conference (Vol. 214). CEUR-WS.org.
bibtex: '@book{Pleuß_Van den Bergh_Hußmann_Sauer_Bödcher_2006, series={CEUR Workshop
Proceedings}, title={Proceedings of the Workshop on Model Driven Development of
Advanced User Interfaces, satellite of the MoDELS 2006 conference}, volume={214},
publisher={CEUR-WS.org}, year={2006}, collection={CEUR Workshop Proceedings} }'
chicago: Pleuß, Andreas, Jan Van den Bergh, Heinrich Hußmann, Stefan Sauer, and
Alexander Bödcher, eds. Proceedings of the Workshop on Model Driven Development
of Advanced User Interfaces, Satellite of the MoDELS 2006 Conference. Vol.
214. CEUR Workshop Proceedings. CEUR-WS.org, 2006.
ieee: A. Pleuß, J. Van den Bergh, H. Hußmann, S. Sauer, and A. Bödcher, Eds., Proceedings
of the Workshop on Model Driven Development of Advanced User Interfaces, satellite
of the MoDELS 2006 conference, vol. 214. CEUR-WS.org, 2006.
mla: Pleuß, Andreas, et al., editors. Proceedings of the Workshop on Model Driven
Development of Advanced User Interfaces, Satellite of the MoDELS 2006 Conference.
Vol. 214, CEUR-WS.org, 2006.
short: A. Pleuß, J. Van den Bergh, H. Hußmann, S. Sauer, A. Bödcher, eds., Proceedings
of the Workshop on Model Driven Development of Advanced User Interfaces, Satellite
of the MoDELS 2006 Conference, CEUR-WS.org, 2006.
date_created: 2019-02-19T18:41:21Z
date_updated: 2022-01-06T07:03:46Z
department:
- _id: '66'
editor:
- first_name: Andreas
full_name: Pleuß, Andreas
last_name: Pleuß
- first_name: Jan
full_name: Van den Bergh, Jan
last_name: Van den Bergh
- first_name: Heinrich
full_name: Hußmann, Heinrich
last_name: Hußmann
- first_name: Stefan
full_name: Sauer, Stefan
id: '447'
last_name: Sauer
- first_name: Alexander
full_name: Bödcher, Alexander
last_name: Bödcher
intvolume: ' 214'
language:
- iso: eng
publisher: CEUR-WS.org
series_title: CEUR Workshop Proceedings
status: public
title: Proceedings of the Workshop on Model Driven Development of Advanced User Interfaces,
satellite of the MoDELS 2006 conference
type: conference_editor
user_id: '52534'
volume: 214
year: '2006'
...
---
_id: '7947'
author:
- first_name: Christoph
full_name: Loeser, Christoph
last_name: Loeser
- first_name: Gunnar
full_name: Schomaker, Gunnar
last_name: Schomaker
- first_name: Matthias
full_name: Schubert, Matthias
last_name: Schubert
- first_name: Tim
full_name: Schattkowsky, Tim
last_name: Schattkowsky
citation:
ama: 'Loeser C, Schomaker G, Schubert M, Schattkowsky T. Fairness Considerations
in Replication and Placement Strategies for large Documents in heterogeneous Content
Delivery Networks. In: Proceedings of the 5th International Conference on Networking
(ICN 2006), Morne (Mauritius). Washington, DC, USA: IEEE Computer Society;
2006:105. doi:http://dx.doi.org/10.1109/ICNICONSMCL.2006.96'
apa: 'Loeser, C., Schomaker, G., Schubert, M., & Schattkowsky, T. (2006). Fairness
Considerations in Replication and Placement Strategies for large Documents in
heterogeneous Content Delivery Networks. In Proceedings of the 5th International
Conference on Networking (ICN 2006), Morne (Mauritius) (p. 105). Washington,
DC, USA: IEEE Computer Society. http://dx.doi.org/10.1109/ICNICONSMCL.2006.96'
bibtex: '@inproceedings{Loeser_Schomaker_Schubert_Schattkowsky_2006, place={Washington,
DC, USA}, title={Fairness Considerations in Replication and Placement Strategies
for large Documents in heterogeneous Content Delivery Networks}, DOI={http://dx.doi.org/10.1109/ICNICONSMCL.2006.96},
booktitle={Proceedings of the 5th International Conference on Networking (ICN
2006), Morne (Mauritius)}, publisher={IEEE Computer Society}, author={Loeser,
Christoph and Schomaker, Gunnar and Schubert, Matthias and Schattkowsky, Tim},
year={2006}, pages={105} }'
chicago: 'Loeser, Christoph, Gunnar Schomaker, Matthias Schubert, and Tim Schattkowsky.
“Fairness Considerations in Replication and Placement Strategies for Large Documents
in Heterogeneous Content Delivery Networks.” In Proceedings of the 5th International
Conference on Networking (ICN 2006), Morne (Mauritius), 105. Washington, DC,
USA: IEEE Computer Society, 2006. http://dx.doi.org/10.1109/ICNICONSMCL.2006.96.'
ieee: C. Loeser, G. Schomaker, M. Schubert, and T. Schattkowsky, “Fairness Considerations
in Replication and Placement Strategies for large Documents in heterogeneous Content
Delivery Networks,” in Proceedings of the 5th International Conference on Networking
(ICN 2006), Morne (Mauritius), 2006, p. 105.
mla: Loeser, Christoph, et al. “Fairness Considerations in Replication and Placement
Strategies for Large Documents in Heterogeneous Content Delivery Networks.” Proceedings
of the 5th International Conference on Networking (ICN 2006), Morne (Mauritius),
IEEE Computer Society, 2006, p. 105, doi:http://dx.doi.org/10.1109/ICNICONSMCL.2006.96.
short: 'C. Loeser, G. Schomaker, M. Schubert, T. Schattkowsky, in: Proceedings of
the 5th International Conference on Networking (ICN 2006), Morne (Mauritius),
IEEE Computer Society, Washington, DC, USA, 2006, p. 105.'
date_created: 2019-02-21T11:40:26Z
date_updated: 2022-01-06T07:03:48Z
department:
- _id: '66'
doi: http://dx.doi.org/10.1109/ICNICONSMCL.2006.96
language:
- iso: eng
page: '105'
place: Washington, DC, USA
publication: Proceedings of the 5th International Conference on Networking (ICN 2006),
Morne (Mauritius)
publisher: IEEE Computer Society
status: public
title: Fairness Considerations in Replication and Placement Strategies for large Documents
in heterogeneous Content Delivery Networks
type: conference
user_id: '52534'
year: '2006'
...
---
_id: '7948'
author:
- first_name: Tim
full_name: Schattkowsky, Tim
last_name: Schattkowsky
- first_name: Alexander
full_name: Förster, Alexander
last_name: Förster
- first_name: Christoph
full_name: Loeser, Christoph
last_name: Loeser
citation:
ama: 'Schattkowsky T, Förster A, Loeser C. Secure Storage for Physically Exposed
Web- and Application Servers. In: Proceedings of the 5th International Conference
on Networking (ICN 2006), Morne (Mauritius). Washington, DC, USA: IEEE Computer
Society; 2006:86.'
apa: 'Schattkowsky, T., Förster, A., & Loeser, C. (2006). Secure Storage for
Physically Exposed Web- and Application Servers. In Proceedings of the 5th
International Conference on Networking (ICN 2006), Morne (Mauritius) (p. 86).
Washington, DC, USA: IEEE Computer Society.'
bibtex: '@inproceedings{Schattkowsky_Förster_Loeser_2006, place={Washington, DC,
USA}, title={Secure Storage for Physically Exposed Web- and Application Servers},
booktitle={Proceedings of the 5th International Conference on Networking (ICN
2006), Morne (Mauritius)}, publisher={IEEE Computer Society}, author={Schattkowsky,
Tim and Förster, Alexander and Loeser, Christoph}, year={2006}, pages={86} }'
chicago: 'Schattkowsky, Tim, Alexander Förster, and Christoph Loeser. “Secure Storage
for Physically Exposed Web- and Application Servers.” In Proceedings of the
5th International Conference on Networking (ICN 2006), Morne (Mauritius),
86. Washington, DC, USA: IEEE Computer Society, 2006.'
ieee: T. Schattkowsky, A. Förster, and C. Loeser, “Secure Storage for Physically
Exposed Web- and Application Servers,” in Proceedings of the 5th International
Conference on Networking (ICN 2006), Morne (Mauritius), 2006, p. 86.
mla: Schattkowsky, Tim, et al. “Secure Storage for Physically Exposed Web- and Application
Servers.” Proceedings of the 5th International Conference on Networking (ICN
2006), Morne (Mauritius), IEEE Computer Society, 2006, p. 86.
short: 'T. Schattkowsky, A. Förster, C. Loeser, in: Proceedings of the 5th International
Conference on Networking (ICN 2006), Morne (Mauritius), IEEE Computer Society,
Washington, DC, USA, 2006, p. 86.'
date_created: 2019-02-21T11:40:28Z
date_updated: 2022-01-06T07:03:48Z
department:
- _id: '66'
language:
- iso: eng
page: '86'
place: Washington, DC, USA
publication: Proceedings of the 5th International Conference on Networking (ICN 2006),
Morne (Mauritius)
publisher: IEEE Computer Society
status: public
title: Secure Storage for Physically Exposed Web- and Application Servers
type: conference
user_id: '52534'
year: '2006'
...
---
_id: '7949'
author:
- first_name: Tim
full_name: Schattkowsky, Tim
last_name: Schattkowsky
- first_name: Jan
full_name: Hendrik Hausmann, Jan
last_name: Hendrik Hausmann
- first_name: Gregor
full_name: Engels, Gregor
id: '107'
last_name: Engels
citation:
ama: 'Schattkowsky T, Hendrik Hausmann J, Engels G. Using UML Activities for System-on-Chip
Design and Synthesis. In: Proceedings of the International Conference on Model
Driven Engineering Languages and Systems (MoDELS 2006), Genova (Italy). Vol
4199/2006. LNCS. Berlin/Heidelberg: Springer; 2006:737-752. doi:dx.doi.org/10.1007/11880240_51'
apa: 'Schattkowsky, T., Hendrik Hausmann, J., & Engels, G. (2006). Using UML
Activities for System-on-Chip Design and Synthesis. In Proceedings of the International
Conference on Model Driven Engineering Languages and Systems (MoDELS 2006), Genova
(Italy) (Vol. 4199/2006, pp. 737–752). Berlin/Heidelberg: Springer. https://doi.org/dx.doi.org/10.1007/11880240_51'
bibtex: '@inproceedings{Schattkowsky_Hendrik Hausmann_Engels_2006, place={Berlin/Heidelberg},
series={LNCS}, title={Using UML Activities for System-on-Chip Design and Synthesis},
volume={4199/2006}, DOI={dx.doi.org/10.1007/11880240_51},
booktitle={Proceedings of the International Conference on Model Driven Engineering
Languages and Systems (MoDELS 2006), Genova (Italy)}, publisher={Springer}, author={Schattkowsky,
Tim and Hendrik Hausmann, Jan and Engels, Gregor}, year={2006}, pages={737–752},
collection={LNCS} }'
chicago: 'Schattkowsky, Tim, Jan Hendrik Hausmann, and Gregor Engels. “Using UML
Activities for System-on-Chip Design and Synthesis.” In Proceedings of the
International Conference on Model Driven Engineering Languages and Systems (MoDELS
2006), Genova (Italy), 4199/2006:737–52. LNCS. Berlin/Heidelberg: Springer,
2006. https://doi.org/dx.doi.org/10.1007/11880240_51.'
ieee: T. Schattkowsky, J. Hendrik Hausmann, and G. Engels, “Using UML Activities
for System-on-Chip Design and Synthesis,” in Proceedings of the International
Conference on Model Driven Engineering Languages and Systems (MoDELS 2006), Genova
(Italy), 2006, vol. 4199/2006, pp. 737–752.
mla: Schattkowsky, Tim, et al. “Using UML Activities for System-on-Chip Design and
Synthesis.” Proceedings of the International Conference on Model Driven Engineering
Languages and Systems (MoDELS 2006), Genova (Italy), vol. 4199/2006, Springer,
2006, pp. 737–52, doi:dx.doi.org/10.1007/11880240_51.
short: 'T. Schattkowsky, J. Hendrik Hausmann, G. Engels, in: Proceedings of the
International Conference on Model Driven Engineering Languages and Systems (MoDELS
2006), Genova (Italy), Springer, Berlin/Heidelberg, 2006, pp. 737–752.'
date_created: 2019-02-21T11:40:29Z
date_updated: 2022-01-06T07:03:48Z
department:
- _id: '66'
doi: dx.doi.org/10.1007/11880240_51
language:
- iso: eng
page: 737-752
place: Berlin/Heidelberg
publication: Proceedings of the International Conference on Model Driven Engineering
Languages and Systems (MoDELS 2006), Genova (Italy)
publisher: Springer
series_title: LNCS
status: public
title: Using UML Activities for System-on-Chip Design and Synthesis
type: conference
user_id: '52534'
volume: 4199/2006
year: '2006'
...
---
_id: '7950'
author:
- first_name: Andreas
full_name: Pleuß, Andreas
last_name: Pleuß
- first_name: Jan
full_name: Van den Bergh, Jan
last_name: Van den Bergh
- first_name: Stefan
full_name: Sauer, Stefan
id: '447'
last_name: Sauer
- first_name: Heinrich
full_name: Hußmann, Heinrich
last_name: Hußmann
citation:
ama: 'Pleuß A, Van den Bergh J, Sauer S, Hußmann H. Workshop Report: Model Driven
Development of Advanced User Interfaces (MDDAUI). In: Satellite Events at the
MoDELS 2005 Conference, MoDELS 2005 International Workshops, Doctoral Symposium,
Educators Symposium, Revised Selected Papers, Montego Bay (Jamaica). Vol 3844.
LNCS. Berlin/Heidelberg: Springer; 2006:182-190. doi:dx.doi.org/10.1007/11663430_19'
apa: 'Pleuß, A., Van den Bergh, J., Sauer, S., & Hußmann, H. (2006). Workshop
Report: Model Driven Development of Advanced User Interfaces (MDDAUI). In Satellite
Events at the MoDELS 2005 Conference, MoDELS 2005 International Workshops, Doctoral
Symposium, Educators Symposium, Revised Selected Papers, Montego Bay (Jamaica)
(Vol. 3844, pp. 182–190). Berlin/Heidelberg: Springer. https://doi.org/dx.doi.org/10.1007/11663430_19'
bibtex: '@inproceedings{Pleuß_Van den Bergh_Sauer_Hußmann_2006, place={Berlin/Heidelberg},
series={LNCS}, title={Workshop Report: Model Driven Development of Advanced User
Interfaces (MDDAUI)}, volume={3844}, DOI={dx.doi.org/10.1007/11663430_19},
booktitle={Satellite Events at the MoDELS 2005 Conference, MoDELS 2005 International
Workshops, Doctoral Symposium, Educators Symposium, Revised Selected Papers, Montego
Bay (Jamaica)}, publisher={Springer}, author={Pleuß, Andreas and Van den Bergh,
Jan and Sauer, Stefan and Hußmann, Heinrich}, year={2006}, pages={182–190}, collection={LNCS}
}'
chicago: 'Pleuß, Andreas, Jan Van den Bergh, Stefan Sauer, and Heinrich Hußmann.
“Workshop Report: Model Driven Development of Advanced User Interfaces (MDDAUI).”
In Satellite Events at the MoDELS 2005 Conference, MoDELS 2005 International
Workshops, Doctoral Symposium, Educators Symposium, Revised Selected Papers, Montego
Bay (Jamaica), 3844:182–90. LNCS. Berlin/Heidelberg: Springer, 2006. https://doi.org/dx.doi.org/10.1007/11663430_19.'
ieee: 'A. Pleuß, J. Van den Bergh, S. Sauer, and H. Hußmann, “Workshop Report: Model
Driven Development of Advanced User Interfaces (MDDAUI),” in Satellite Events
at the MoDELS 2005 Conference, MoDELS 2005 International Workshops, Doctoral Symposium,
Educators Symposium, Revised Selected Papers, Montego Bay (Jamaica), 2006,
vol. 3844, pp. 182–190.'
mla: 'Pleuß, Andreas, et al. “Workshop Report: Model Driven Development of Advanced
User Interfaces (MDDAUI).” Satellite Events at the MoDELS 2005 Conference,
MoDELS 2005 International Workshops, Doctoral Symposium, Educators Symposium,
Revised Selected Papers, Montego Bay (Jamaica), vol. 3844, Springer, 2006,
pp. 182–90, doi:dx.doi.org/10.1007/11663430_19.'
short: 'A. Pleuß, J. Van den Bergh, S. Sauer, H. Hußmann, in: Satellite Events at
the MoDELS 2005 Conference, MoDELS 2005 International Workshops, Doctoral Symposium,
Educators Symposium, Revised Selected Papers, Montego Bay (Jamaica), Springer,
Berlin/Heidelberg, 2006, pp. 182–190.'
date_created: 2019-02-21T11:44:16Z
date_updated: 2022-01-06T07:03:48Z
department:
- _id: '66'
doi: dx.doi.org/10.1007/11663430_19
intvolume: ' 3844'
language:
- iso: eng
page: 182-190
place: Berlin/Heidelberg
publication: Satellite Events at the MoDELS 2005 Conference, MoDELS 2005 International
Workshops, Doctoral Symposium, Educators Symposium, Revised Selected Papers, Montego
Bay (Jamaica)
publisher: Springer
series_title: LNCS
status: public
title: 'Workshop Report: Model Driven Development of Advanced User Interfaces (MDDAUI)'
type: conference
user_id: '52534'
volume: 3844
year: '2006'
...