--- _id: '9767' abstract: - lang: eng text: The paper presents the results of numerical and experimental investigation of cylindrical piezoelectric actuator used for achieving independent three degrees of freedom oscillations of the contact point. The design of actuator based on a hollow piezoelectric cylinder mounted on a metal rod. The piezoceramic cylinder has a radial polarization and special configuration of the electrodes that cover inner and outer surface of the cylinder. The main advantage of actuator's design is that solid metallic rod operates as a part of inner electrode of the cylinder and a stator of actuator. The geometry of piezoelectric actuator was adopted to reach resonance of oscillations for the first longitudinal mode and the third flexural mode at same frequency. The actuator is designed to move positioned object through contact point which is located on the top of the rod. The optimal topology of electrodes was found to achieve longitudinal and flexural oscillations of the actuator in two perpendicular planes. Three degrees of freedom of the positioning object can be achieved and control of the system can be implemented by applying different excitation schemes and regimes. The numerical simulation and experimental study of piezoelectric actuator was performed. Impedance of actuator was analyzed under different excitation regimes. The results of numerical modeling and experimental study were compared. Recommendations for the further development of this type of actuator are given. author: - first_name: Raimundas full_name: Lucinskis, Raimundas last_name: Lucinskis - first_name: Dalius full_name: Mazeika, Dalius last_name: Mazeika - first_name: Tobias full_name: Hemsel, Tobias id: '210' last_name: Hemsel - first_name: Ramutis full_name: Bansevicius, Ramutis last_name: Bansevicius citation: ama: Lucinskis R, Mazeika D, Hemsel T, Bansevicius R. Multi-DOF cylindrical piezoelectric actuator with radial polarization. AIP Conference Proceedings. 2011;1433(1):693-696. doi:10.1063/1.3703277 apa: Lucinskis, R., Mazeika, D., Hemsel, T., & Bansevicius, R. (2011). Multi-DOF cylindrical piezoelectric actuator with radial polarization. AIP Conference Proceedings, 1433(1), 693–696. https://doi.org/10.1063/1.3703277 bibtex: '@article{Lucinskis_Mazeika_Hemsel_Bansevicius_2011, title={Multi-DOF cylindrical piezoelectric actuator with radial polarization}, volume={1433}, DOI={10.1063/1.3703277}, number={1}, journal={AIP Conference Proceedings}, publisher={AIP}, author={Lucinskis, Raimundas and Mazeika, Dalius and Hemsel, Tobias and Bansevicius, Ramutis}, year={2011}, pages={693–696} }' chicago: 'Lucinskis, Raimundas, Dalius Mazeika, Tobias Hemsel, and Ramutis Bansevicius. “Multi-DOF Cylindrical Piezoelectric Actuator with Radial Polarization.” AIP Conference Proceedings 1433, no. 1 (2011): 693–96. https://doi.org/10.1063/1.3703277.' ieee: R. Lucinskis, D. Mazeika, T. Hemsel, and R. Bansevicius, “Multi-DOF cylindrical piezoelectric actuator with radial polarization,” AIP Conference Proceedings, vol. 1433, no. 1, pp. 693–696, 2011. mla: Lucinskis, Raimundas, et al. “Multi-DOF Cylindrical Piezoelectric Actuator with Radial Polarization.” AIP Conference Proceedings, vol. 1433, no. 1, AIP, 2011, pp. 693–96, doi:10.1063/1.3703277. short: R. Lucinskis, D. Mazeika, T. Hemsel, R. Bansevicius, AIP Conference Proceedings 1433 (2011) 693–696. date_created: 2019-05-13T10:56:30Z date_updated: 2022-01-06T07:04:19Z department: - _id: '151' doi: 10.1063/1.3703277 intvolume: ' 1433' issue: '1' keyword: - dielectric polarisation - piezoceramics - piezoelectric actuators language: - iso: eng page: 693-696 publication: AIP Conference Proceedings publisher: AIP quality_controlled: '1' status: public title: Multi-DOF cylindrical piezoelectric actuator with radial polarization type: journal_article user_id: '55222' volume: 1433 year: '2011' ... --- _id: '9768' author: - first_name: Oleg full_name: Lurie, Oleg last_name: Lurie - first_name: Ivan full_name: Kromov, Ivan last_name: Kromov - first_name: Ansgar full_name: Trächtler, Ansgar last_name: Trächtler - first_name: Christoph full_name: Sondermann-Wölke, Christoph last_name: Sondermann-Wölke - first_name: Walter full_name: Sextro, Walter id: '21220' last_name: Sextro citation: ama: 'Lurie O, Kromov I, Trächtler A, Sondermann-Wölke C, Sextro W. Dependability Analysis of the Degradation Behavior of Mechatronics Systems with Different Operating Strategies. In: 25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung Und Betrieb Zuverlässiger Produkte. Leonberg; 2011:99-110.' apa: Lurie, O., Kromov, I., Trächtler, A., Sondermann-Wölke, C., & Sextro, W. (2011). Dependability Analysis of the Degradation Behavior of Mechatronics Systems with Different Operating Strategies. In 25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung und Betrieb zuverlässiger Produkte (pp. 99–110). Leonberg. bibtex: '@inproceedings{Lurie_Kromov_Trächtler_Sondermann-Wölke_Sextro_2011, place={Leonberg}, title={Dependability Analysis of the Degradation Behavior of Mechatronics Systems with Different Operating Strategies}, booktitle={25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung und Betrieb zuverlässiger Produkte}, author={Lurie, Oleg and Kromov, Ivan and Trächtler, Ansgar and Sondermann-Wölke, Christoph and Sextro, Walter}, year={2011}, pages={99–110} }' chicago: Lurie, Oleg, Ivan Kromov, Ansgar Trächtler, Christoph Sondermann-Wölke, and Walter Sextro. “Dependability Analysis of the Degradation Behavior of Mechatronics Systems with Different Operating Strategies.” In 25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung Und Betrieb Zuverlässiger Produkte, 99–110. Leonberg, 2011. ieee: O. Lurie, I. Kromov, A. Trächtler, C. Sondermann-Wölke, and W. Sextro, “Dependability Analysis of the Degradation Behavior of Mechatronics Systems with Different Operating Strategies,” in 25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung und Betrieb zuverlässiger Produkte, 2011, pp. 99–110. mla: Lurie, Oleg, et al. “Dependability Analysis of the Degradation Behavior of Mechatronics Systems with Different Operating Strategies.” 25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung Und Betrieb Zuverlässiger Produkte, 2011, pp. 99–110. short: 'O. Lurie, I. Kromov, A. Trächtler, C. Sondermann-Wölke, W. Sextro, in: 25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung Und Betrieb Zuverlässiger Produkte, Leonberg, 2011, pp. 99–110.' date_created: 2019-05-13T10:57:24Z date_updated: 2022-01-06T07:04:19Z department: - _id: '151' language: - iso: eng page: 99-110 place: Leonberg publication: 25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung und Betrieb zuverlässiger Produkte status: public title: Dependability Analysis of the Degradation Behavior of Mechatronics Systems with Different Operating Strategies type: conference user_id: '55222' year: '2011' ... --- _id: '9769' abstract: - lang: eng text: In this study, we report some improvements in a hydrothermal method for lead-free piezoelectric powders and the performance of the sintered (K$_{0.48}$Na$_{0.52}$)NbO$_{3}$ ceramics. To increase the obtained powder weight per source solution volume, the hydrothermal reaction conditions were modified. This improvement is important for mass production; however, it resulted in a larger particle size dispersion. Therefore, we examined to introduced the ball milling process that is useful for dense (K$_{0.48}$Na$_{0.52}$)NbO$_{3}$ ceramics. When a large amount of powder was obtained, it took a long time to eliminate the residual alkaline ions in the hydrothermal powders by a washing process. Therefore, a neutralization was conducted in the powder washing process. Using this powder, a solid solution of (K,Na)NbO$_{3}$ceramics was synthesized. The relative density was successfully increased. Concerning the electrical properties, the relative permittivity was improved, and the piezoelectric constant d$_{33}$ was also increased from 114 to 130 pC/N. author: - first_name: Takafumi full_name: Maeda, Takafumi last_name: Maeda - first_name: Tobias full_name: Hemsel, Tobias id: '210' last_name: Hemsel - first_name: Takeshi full_name: Morita, Takeshi last_name: Morita citation: ama: Maeda T, Hemsel T, Morita T. Improved Process for Hydrothermal Lead-Free Piezoelectric Powders and Performances of Sintered (K0.48Na0.52)NbO3 Ceramics. Japanese Journal of Applied Physics. 2011;50:07HC01. apa: Maeda, T., Hemsel, T., & Morita, T. (2011). Improved Process for Hydrothermal Lead-Free Piezoelectric Powders and Performances of Sintered (K0.48Na0.52)NbO3 Ceramics. Japanese Journal of Applied Physics, 50, 07HC01. bibtex: '@article{Maeda_Hemsel_Morita_2011, title={Improved Process for Hydrothermal Lead-Free Piezoelectric Powders and Performances of Sintered (K0.48Na0.52)NbO3 Ceramics}, volume={50}, journal={Japanese Journal of Applied Physics}, publisher={The Japan Society of Applied Physics}, author={Maeda, Takafumi and Hemsel, Tobias and Morita, Takeshi}, year={2011}, pages={07HC01} }' chicago: 'Maeda, Takafumi, Tobias Hemsel, and Takeshi Morita. “Improved Process for Hydrothermal Lead-Free Piezoelectric Powders and Performances of Sintered (K0.48Na0.52)NbO3 Ceramics.” Japanese Journal of Applied Physics 50 (2011): 07HC01.' ieee: T. Maeda, T. Hemsel, and T. Morita, “Improved Process for Hydrothermal Lead-Free Piezoelectric Powders and Performances of Sintered (K0.48Na0.52)NbO3 Ceramics,” Japanese Journal of Applied Physics, vol. 50, p. 07HC01, 2011. mla: Maeda, Takafumi, et al. “Improved Process for Hydrothermal Lead-Free Piezoelectric Powders and Performances of Sintered (K0.48Na0.52)NbO3 Ceramics.” Japanese Journal of Applied Physics, vol. 50, The Japan Society of Applied Physics, 2011, p. 07HC01. short: T. Maeda, T. Hemsel, T. Morita, Japanese Journal of Applied Physics 50 (2011) 07HC01. date_created: 2019-05-13T11:00:23Z date_updated: 2022-01-06T07:04:19Z department: - _id: '151' intvolume: ' 50' language: - iso: eng page: 07HC01 publication: Japanese Journal of Applied Physics publisher: The Japan Society of Applied Physics quality_controlled: '1' status: public title: Improved Process for Hydrothermal Lead-Free Piezoelectric Powders and Performances of Sintered (K0.48Na0.52)NbO3 Ceramics type: journal_article user_id: '55222' volume: 50 year: '2011' ... --- _id: '9770' abstract: - lang: eng text: One cannot image today's life without mechatronic systems, which have to be developed in a joint effort by teams of mechanical engineers, electrical engineers, control engineers and software engineers. Often these systems are applied in safety critical environments like in cars or aircrafts. This requires systems that function correctly and do not cause hazardous situations. However, random errors due to wear or external influences cannot be completely excluded. Consequently, we have to perform a hazard analysis for the system. Further, the union of four disciplines in one system requires the development and analysis of the system as a whole. We present a component-based hazard analysis that considers the entire mechatronic system including hardware, i.e. mechanical and electrical components, and software components. Our approach considers the physical properties of different types of flow in mechatronic systems. We have identified reusable patterns for the failure behavior which can be generated automatically. This reduces the effort for the developer. As cycles, e.g. control cycles, are an internal part of every mechatronic system our approach is able to handle cycles. The presented approach has been applied to a real-life case study. author: - first_name: Claudia full_name: Priesterjahn, Claudia last_name: Priesterjahn - first_name: Christoph full_name: Sondermann-Wölke, Christoph last_name: Sondermann-Wölke - first_name: Mathias full_name: Tichy, Mathias last_name: Tichy - first_name: Christian full_name: Hölscher, Christian last_name: Hölscher citation: ama: 'Priesterjahn C, Sondermann-Wölke C, Tichy M, Hölscher C. Component-based Hazard Analysis for Mechatronic Systems. In: Proc. of the 2nd IEEE International Workshop MoBE-RTES at the 14th IEEE International Symposium on Object/Component/Service-Oriented Real-Time Distributed Computing (ISORC). Newport Beach, USA (USA): IEEE Computer Society; 2011.' apa: 'Priesterjahn, C., Sondermann-Wölke, C., Tichy, M., & Hölscher, C. (2011). Component-based Hazard Analysis for Mechatronic Systems. In Proc. of the 2nd IEEE International Workshop MoBE-RTES at the 14th IEEE International Symposium on Object/Component/Service-oriented Real-time Distributed Computing (ISORC). Newport Beach, USA (USA): IEEE Computer Society.' bibtex: '@inproceedings{Priesterjahn_Sondermann-Wölke_Tichy_Hölscher_2011, place={Newport Beach, USA (USA)}, title={Component-based Hazard Analysis for Mechatronic Systems}, booktitle={Proc. of the 2nd IEEE International Workshop MoBE-RTES at the 14th IEEE International Symposium on Object/Component/Service-oriented Real-time Distributed Computing (ISORC)}, publisher={IEEE Computer Society}, author={Priesterjahn, Claudia and Sondermann-Wölke, Christoph and Tichy, Mathias and Hölscher, Christian}, year={2011} }' chicago: 'Priesterjahn, Claudia, Christoph Sondermann-Wölke, Mathias Tichy, and Christian Hölscher. “Component-Based Hazard Analysis for Mechatronic Systems.” In Proc. of the 2nd IEEE International Workshop MoBE-RTES at the 14th IEEE International Symposium on Object/Component/Service-Oriented Real-Time Distributed Computing (ISORC). Newport Beach, USA (USA): IEEE Computer Society, 2011.' ieee: C. Priesterjahn, C. Sondermann-Wölke, M. Tichy, and C. Hölscher, “Component-based Hazard Analysis for Mechatronic Systems,” in Proc. of the 2nd IEEE International Workshop MoBE-RTES at the 14th IEEE International Symposium on Object/Component/Service-oriented Real-time Distributed Computing (ISORC), 2011. mla: Priesterjahn, Claudia, et al. “Component-Based Hazard Analysis for Mechatronic Systems.” Proc. of the 2nd IEEE International Workshop MoBE-RTES at the 14th IEEE International Symposium on Object/Component/Service-Oriented Real-Time Distributed Computing (ISORC), IEEE Computer Society, 2011. short: 'C. Priesterjahn, C. Sondermann-Wölke, M. Tichy, C. Hölscher, in: Proc. of the 2nd IEEE International Workshop MoBE-RTES at the 14th IEEE International Symposium on Object/Component/Service-Oriented Real-Time Distributed Computing (ISORC), IEEE Computer Society, Newport Beach, USA (USA), 2011.' date_created: 2019-05-13T11:01:13Z date_updated: 2022-01-06T07:04:19Z department: - _id: '151' language: - iso: eng place: Newport Beach, USA (USA) publication: Proc. of the 2nd IEEE International Workshop MoBE-RTES at the 14th IEEE International Symposium on Object/Component/Service-oriented Real-time Distributed Computing (ISORC) publisher: IEEE Computer Society quality_controlled: '1' status: public title: Component-based Hazard Analysis for Mechatronic Systems type: conference user_id: '55222' year: '2011' ... --- _id: '9771' abstract: - lang: eng text: "Dieser Beitrag stellt ein Konzept vor, welches die Methode der Mehrzieloptimierung mit einer Online-Bewertung des aktuellen Systemzustands kombiniert. Dieses erlaubt Maßnahmen zur Zuverlässigkeitssteigerung abzuleiten. Das Konzept wird auf ein X-by-wire-Fahrzeug mit Einzelradaktorik angewandt. Dabei steht zunächst die Beeinflussung der Ziele der Mehrzieloptimierung zugunsten der Zuverlässigkeit des Systems im Vordergrund. In Simulationen wird gezeigt, dass über die Wahl und Gewichtung der Zielfunktionen die Quer- und Längskräfte an den Rädern vorteilhaft verteilt werden können. \r\n\r\nIn this contribution a concept is illustrated, which combines the multi-objective optimization technique with an online assessment of the current system state. This allows deriving measures to increase the reliability of the system. The concept is applied to an X-by-wire vehicle with single-wheel actuators. The emphasis is here mostly on the influence of the objectives of the multiobjective optimization for the benefit of the reliability of the system. It is demonstrated in simulations, that the lateral and longitudinal forces at the wheels can be distributed advantageously by the selection of the suitable objective functions and the appropriate weights." author: - first_name: Christoph full_name: Sondermann-Wölke, Christoph last_name: Sondermann-Wölke - first_name: Walter full_name: Sextro, Walter id: '21220' last_name: Sextro - first_name: Peter full_name: Reinold, Peter last_name: Reinold - first_name: Ansgar full_name: Trächtler, Ansgar last_name: Trächtler citation: ama: 'Sondermann-Wölke C, Sextro W, Reinold P, Trächtler A. Zuverlässigkeitsorientierte Mehrzieloptimierung zur Aktorrekonfiguration eines X-by-wire-Fahrzeugs. In: 25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung Und Betrieb Zuverlässiger Produkte. Leonberg; 2011:291-302.' apa: Sondermann-Wölke, C., Sextro, W., Reinold, P., & Trächtler, A. (2011). Zuverlässigkeitsorientierte Mehrzieloptimierung zur Aktorrekonfiguration eines X-by-wire-Fahrzeugs. In 25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung und Betrieb zuverlässiger Produkte (pp. 291–302). Leonberg. bibtex: '@inproceedings{Sondermann-Wölke_Sextro_Reinold_Trächtler_2011, place={Leonberg}, title={Zuverlässigkeitsorientierte Mehrzieloptimierung zur Aktorrekonfiguration eines X-by-wire-Fahrzeugs}, booktitle={25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung und Betrieb zuverlässiger Produkte}, author={Sondermann-Wölke, Christoph and Sextro, Walter and Reinold, Peter and Trächtler, Ansgar}, year={2011}, pages={291–302} }' chicago: Sondermann-Wölke, Christoph, Walter Sextro, Peter Reinold, and Ansgar Trächtler. “Zuverlässigkeitsorientierte Mehrzieloptimierung Zur Aktorrekonfiguration Eines X-by-Wire-Fahrzeugs.” In 25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung Und Betrieb Zuverlässiger Produkte, 291–302. Leonberg, 2011. ieee: C. Sondermann-Wölke, W. Sextro, P. Reinold, and A. Trächtler, “Zuverlässigkeitsorientierte Mehrzieloptimierung zur Aktorrekonfiguration eines X-by-wire-Fahrzeugs,” in 25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung und Betrieb zuverlässiger Produkte, 2011, pp. 291–302. mla: Sondermann-Wölke, Christoph, et al. “Zuverlässigkeitsorientierte Mehrzieloptimierung Zur Aktorrekonfiguration Eines X-by-Wire-Fahrzeugs.” 25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung Und Betrieb Zuverlässiger Produkte, 2011, pp. 291–302. short: 'C. Sondermann-Wölke, W. Sextro, P. Reinold, A. Trächtler, in: 25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung Und Betrieb Zuverlässiger Produkte, Leonberg, 2011, pp. 291–302.' date_created: 2019-05-13T11:04:04Z date_updated: 2022-01-06T07:04:19Z department: - _id: '151' language: - iso: eng page: 291-302 place: Leonberg publication: 25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung und Betrieb zuverlässiger Produkte status: public title: Zuverlässigkeitsorientierte Mehrzieloptimierung zur Aktorrekonfiguration eines X-by-wire-Fahrzeugs type: conference user_id: '55222' year: '2011' ... --- _id: '9772' abstract: - lang: eng text: 'A profound description of friction in wheel--rail contact plays an essential role for optimization of traction control strategies, as input quantity for railway simulations in general and for the estimation of wear and rolling contact fatigue. A multitude of wheel--rail contact models exists, however, traction--creepage curves obtained from measurements show quantitative and qualitative deviations. There are several phenomena which influence the traction--creepage characteristics: Mechanisms resulting from surface roughness, frictional heating or the presence of interfacial fluids can have a dominating influence on friction. In this paper, a new wheel--rail contact model, accounting for these influential parameters, will be presented. The presented model accounts for the interaction of an interfacial fluid model for combined boundary and mixed lubrication of rough surfaces with a wheel--rail contact model that additionally accounts for frictional heating. A quantitative comparison with measurements found in the literature is not conducted, since the exact conditions of the measurements are mostly unknown and parameters can easily be adjusted to fit the measurements. Emphasis is placed on the qualitative behavior of the model with respect to the measurements and good agreement is found. The dependence of the maximum traction coefficient on rolling velocity, surface roughness and normal load is studied under dry and water lubricated conditions.' author: - first_name: Christoph full_name: Tomberger, Christoph last_name: Tomberger - first_name: Peter full_name: Dietmaier, Peter last_name: Dietmaier - first_name: Walter full_name: Sextro, Walter id: '21220' last_name: Sextro - first_name: Klaus full_name: Six, Klaus last_name: Six citation: ama: 'Tomberger C, Dietmaier P, Sextro W, Six K. Friction in wheel--rail contact: A model comprising interfacial fluids, surface roughness and temperature. Wear. 2011;271:2-12. doi:10.1016/j.wear.2010.10.025' apa: 'Tomberger, C., Dietmaier, P., Sextro, W., & Six, K. (2011). Friction in wheel--rail contact: A model comprising interfacial fluids, surface roughness and temperature. Wear, 271, 2–12. https://doi.org/10.1016/j.wear.2010.10.025' bibtex: '@article{Tomberger_Dietmaier_Sextro_Six_2011, title={Friction in wheel--rail contact: A model comprising interfacial fluids, surface roughness and temperature}, volume={271}, DOI={10.1016/j.wear.2010.10.025}, journal={Wear}, author={Tomberger, Christoph and Dietmaier, Peter and Sextro, Walter and Six, Klaus}, year={2011}, pages={2–12} }' chicago: 'Tomberger, Christoph, Peter Dietmaier, Walter Sextro, and Klaus Six. “Friction in Wheel--Rail Contact: A Model Comprising Interfacial Fluids, Surface Roughness and Temperature.” Wear 271 (2011): 2–12. https://doi.org/10.1016/j.wear.2010.10.025.' ieee: 'C. Tomberger, P. Dietmaier, W. Sextro, and K. Six, “Friction in wheel--rail contact: A model comprising interfacial fluids, surface roughness and temperature,” Wear, vol. 271, pp. 2–12, 2011.' mla: 'Tomberger, Christoph, et al. “Friction in Wheel--Rail Contact: A Model Comprising Interfacial Fluids, Surface Roughness and Temperature.” Wear, vol. 271, 2011, pp. 2–12, doi:10.1016/j.wear.2010.10.025.' short: C. Tomberger, P. Dietmaier, W. Sextro, K. Six, Wear 271 (2011) 2–12. date_created: 2019-05-13T11:08:32Z date_updated: 2022-01-06T07:04:19Z department: - _id: '151' doi: 10.1016/j.wear.2010.10.025 intvolume: ' 271' keyword: - Wheel--rail contact - Rolling contact - Friction - Interfacial fluid - Lubrication - Surface roughness - Contact temperature language: - iso: eng page: 2 - 12 publication: Wear publication_identifier: issn: - 0043-1648 quality_controlled: '1' status: public title: 'Friction in wheel--rail contact: A model comprising interfacial fluids, surface roughness and temperature' type: journal_article user_id: '55222' volume: 271 year: '2011' ... --- _id: '9877' author: - first_name: Gaku full_name: Isobe, Gaku last_name: Isobe - first_name: Peter full_name: Bornmann, Peter last_name: Bornmann - first_name: Tobias full_name: Hemsel, Tobias id: '210' last_name: Hemsel - first_name: Takeshi full_name: Morita, Takeshi last_name: Morita citation: ama: Isobe G, Bornmann P, Hemsel T, Morita T. High temperature tolerant transducer for Ultrasonic Assisted Hydrothermal Method. Proceedings of Symposium on Ultrasonic Electronics. 2011;32:19-20. apa: Isobe, G., Bornmann, P., Hemsel, T., & Morita, T. (2011). High temperature tolerant transducer for Ultrasonic Assisted Hydrothermal Method. Proceedings of Symposium on Ultrasonic Electronics, 32, 19–20. bibtex: '@article{Isobe_Bornmann_Hemsel_Morita_2011, title={High temperature tolerant transducer for Ultrasonic Assisted Hydrothermal Method}, volume={32}, journal={Proceedings of Symposium on Ultrasonic Electronics}, publisher={Trans Tech Publ}, author={Isobe, Gaku and Bornmann, Peter and Hemsel, Tobias and Morita, Takeshi}, year={2011}, pages={19–20} }' chicago: 'Isobe, Gaku, Peter Bornmann, Tobias Hemsel, and Takeshi Morita. “High Temperature Tolerant Transducer for Ultrasonic Assisted Hydrothermal Method.” Proceedings of Symposium on Ultrasonic Electronics 32 (2011): 19–20.' ieee: G. Isobe, P. Bornmann, T. Hemsel, and T. Morita, “High temperature tolerant transducer for Ultrasonic Assisted Hydrothermal Method,” Proceedings of Symposium on Ultrasonic Electronics, vol. 32, pp. 19–20, 2011. mla: Isobe, Gaku, et al. “High Temperature Tolerant Transducer for Ultrasonic Assisted Hydrothermal Method.” Proceedings of Symposium on Ultrasonic Electronics, vol. 32, Trans Tech Publ, 2011, pp. 19–20. short: G. Isobe, P. Bornmann, T. Hemsel, T. Morita, Proceedings of Symposium on Ultrasonic Electronics 32 (2011) 19–20. date_created: 2019-05-20T13:09:04Z date_updated: 2019-09-16T11:31:38Z department: - _id: '151' intvolume: ' 32' language: - iso: eng page: 19-20 publication: Proceedings of Symposium on Ultrasonic Electronics publisher: Trans Tech Publ quality_controlled: '1' status: public title: High temperature tolerant transducer for Ultrasonic Assisted Hydrothermal Method type: journal_article user_id: '55222' volume: 32 year: '2011' ... --- _id: '9918' citation: ama: 'Tönnies M, Flotmann C, eds. Narrative in Drama. Trier: WVT; 2011.' apa: 'Tönnies, M., & Flotmann, C. (Eds.). (2011). Narrative in Drama. Trier: WVT.' bibtex: '@book{Tönnies_Flotmann_2011, place={Trier}, title={Narrative in Drama}, publisher={WVT}, year={2011} }' chicago: 'Tönnies, Merle, and Christina Flotmann, eds. Narrative in Drama. Trier: WVT, 2011.' ieee: 'M. Tönnies and C. Flotmann, Eds., Narrative in Drama. Trier: WVT, 2011.' mla: Tönnies, Merle, and Christina Flotmann, editors. Narrative in Drama. WVT, 2011. short: M. Tönnies, C. Flotmann, eds., Narrative in Drama, WVT, Trier, 2011. date_created: 2019-05-22T11:18:02Z date_updated: 2019-05-22T11:18:22Z department: - _id: '36' - _id: '1' - _id: '380' editor: - first_name: Merle full_name: Tönnies, Merle id: '555' last_name: Tönnies - first_name: Christina full_name: Flotmann, Christina id: '8736' last_name: Flotmann language: - iso: eng place: Trier publication_status: published publisher: WVT status: public title: Narrative in Drama type: book_editor user_id: '32277' year: '2011' ... --- _id: '4089' abstract: - lang: eng text: We study the influence of the phonon environment on the electron dynamics in a doped quantum dot molecule. A non-perturbative quantumkinetic theory based on correlation expansion is used in order to describe both diagonal and off-diagonal electron-phonon couplings representing real and virtual processes with relevant acoustic phonons. We show that the relaxation is dominated by phononassisted electron tunneling between constituent quantum dots and occurs on a picosecond time scale. The dependence of the time evolution of the quantum dot occupation probabilities on the energy mismatch between the quantum dots is studied in detail. article_type: original author: - first_name: Anna full_name: Grodecka-Grad, Anna last_name: Grodecka-Grad - first_name: Jens full_name: Förstner, Jens id: '158' last_name: Förstner orcid: 0000-0001-7059-9862 citation: ama: Grodecka-Grad A, Förstner J. Phonon-assisted decoherence and tunneling in quantum dot molecules. physica status solidi (c). 2011;8(4):1125-1128. doi:10.1002/pssc.201000824 apa: Grodecka-Grad, A., & Förstner, J. (2011). Phonon-assisted decoherence and tunneling in quantum dot molecules. Physica Status Solidi (C), 8(4), 1125–1128. https://doi.org/10.1002/pssc.201000824 bibtex: '@article{Grodecka-Grad_Förstner_2011, title={Phonon-assisted decoherence and tunneling in quantum dot molecules}, volume={8}, DOI={10.1002/pssc.201000824}, number={4}, journal={physica status solidi (c)}, publisher={Wiley}, author={Grodecka-Grad, Anna and Förstner, Jens}, year={2011}, pages={1125–1128} }' chicago: 'Grodecka-Grad, Anna, and Jens Förstner. “Phonon-Assisted Decoherence and Tunneling in Quantum Dot Molecules.” Physica Status Solidi (C) 8, no. 4 (2011): 1125–28. https://doi.org/10.1002/pssc.201000824.' ieee: A. Grodecka-Grad and J. Förstner, “Phonon-assisted decoherence and tunneling in quantum dot molecules,” physica status solidi (c), vol. 8, no. 4, pp. 1125–1128, 2011. mla: Grodecka-Grad, Anna, and Jens Förstner. “Phonon-Assisted Decoherence and Tunneling in Quantum Dot Molecules.” Physica Status Solidi (C), vol. 8, no. 4, Wiley, 2011, pp. 1125–28, doi:10.1002/pssc.201000824. short: A. Grodecka-Grad, J. Förstner, Physica Status Solidi (C) 8 (2011) 1125–1128. date_created: 2018-08-23T09:43:57Z date_updated: 2022-01-06T07:00:14Z ddc: - '530' department: - _id: '170' doi: 10.1002/pssc.201000824 file: - access_level: closed content_type: application/pdf creator: hclaudia date_created: 2018-08-23T09:45:30Z date_updated: 2018-08-23T09:45:30Z file_id: '4090' file_name: 2011 Grodecka-Grad,Förstner_ Phonon-assisted decoherence and tunneling in quantum dot molecules.pdf file_size: 202905 relation: main_file success: 1 file_date_updated: 2018-08-23T09:45:30Z has_accepted_license: '1' intvolume: ' 8' issue: '4' keyword: - tet_topic_qd language: - iso: eng page: 1125-1128 publication: physica status solidi (c) publication_identifier: issn: - 1862-6351 publication_status: published publisher: Wiley status: public title: Phonon-assisted decoherence and tunneling in quantum dot molecules type: journal_article user_id: '55706' volume: 8 year: '2011' ... --- _id: '4140' abstract: - lang: eng text: "In this paper we report on the successful reduction of tensile strain in a thin strained ion-beam\r\nsynthesized 3C-SiC(1 1 1) layer on silicon. The creation of a near-interface defect structure consisting\r\nof nanometric voids and stacking fault type defects by He ion implantation and subsequent annealing\r\nyields significant relaxation in the top SiC film. The microstructure of the defect layer is studied by transmission electron microscopy, and the strain state of the 3C-SiC layer was studied by high-resolution X-ray diffraction in a parallel beam configuration. Typical process conditions for the growth of GaN films on the SiC layer were emulated by high temperature treatments in a rapid thermal annealer or a quartz tube furnace. It is found that prolonged annealing at high temperatures leads to ripening of the voids and to a weaker reduction of the tensile strain. It is shown that this problem can be overcome by the co-implantation of oxygen ions to form highly thermally stable void/extended defect structures." article_type: original author: - first_name: M. full_name: Häberlen, M. last_name: Häberlen - first_name: B. full_name: Murphy, B. last_name: Murphy - first_name: B. full_name: Stritzker, B. last_name: Stritzker - first_name: Jörg full_name: Lindner, Jörg id: '20797' last_name: Lindner citation: ama: 'Häberlen M, Murphy B, Stritzker B, Lindner J. Relaxation of a strained 3C-SiC(111) thin film on silicon by He+ and O+ ion beam defect engineering. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms. 2011;272:322-325. doi:10.1016/j.nimb.2011.01.092' apa: 'Häberlen, M., Murphy, B., Stritzker, B., & Lindner, J. (2011). Relaxation of a strained 3C-SiC(111) thin film on silicon by He+ and O+ ion beam defect engineering. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 272, 322–325. https://doi.org/10.1016/j.nimb.2011.01.092' bibtex: '@article{Häberlen_Murphy_Stritzker_Lindner_2011, title={Relaxation of a strained 3C-SiC(111) thin film on silicon by He+ and O+ ion beam defect engineering}, volume={272}, DOI={10.1016/j.nimb.2011.01.092}, journal={Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms}, publisher={Elsevier BV}, author={Häberlen, M. and Murphy, B. and Stritzker, B. and Lindner, Jörg}, year={2011}, pages={322–325} }' chicago: 'Häberlen, M., B. Murphy, B. Stritzker, and Jörg Lindner. “Relaxation of a Strained 3C-SiC(111) Thin Film on Silicon by He+ and O+ Ion Beam Defect Engineering.” Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 272 (2011): 322–25. https://doi.org/10.1016/j.nimb.2011.01.092.' ieee: 'M. Häberlen, B. Murphy, B. Stritzker, and J. Lindner, “Relaxation of a strained 3C-SiC(111) thin film on silicon by He+ and O+ ion beam defect engineering,” Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, vol. 272, pp. 322–325, 2011.' mla: 'Häberlen, M., et al. “Relaxation of a Strained 3C-SiC(111) Thin Film on Silicon by He+ and O+ Ion Beam Defect Engineering.” Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, vol. 272, Elsevier BV, 2011, pp. 322–25, doi:10.1016/j.nimb.2011.01.092.' short: 'M. Häberlen, B. Murphy, B. Stritzker, J. Lindner, Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 272 (2011) 322–325.' date_created: 2018-08-27T12:27:23Z date_updated: 2022-01-06T07:00:23Z ddc: - '530' department: - _id: '15' - _id: '286' doi: 10.1016/j.nimb.2011.01.092 file: - access_level: closed content_type: application/pdf creator: hclaudia date_created: 2018-08-27T12:29:34Z date_updated: 2018-08-27T12:29:34Z file_id: '4141' file_name: Relaxation of a strained 3C-SiC(111) thin film on silicon by He+ and O+ ion beam defect engineering.pdf file_size: 772335 relation: main_file success: 1 file_date_updated: 2018-08-27T12:29:34Z has_accepted_license: '1' intvolume: ' 272' language: - iso: eng page: 322-325 publication: 'Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms' publication_identifier: issn: - 0168-583X publication_status: published publisher: Elsevier BV status: public title: Relaxation of a strained 3C-SiC(111) thin film on silicon by He+ and O+ ion beam defect engineering type: journal_article user_id: '55706' volume: 272 year: '2011' ... --- _id: '4142' abstract: - lang: eng text: This paper reports the successful reduction of tensile strain in a thin ion-beam-synthesized 3C-SiC(111) layer on silicon. Significant relaxation is achieved by creating a near-interface defect structure containing nanometric voids and dislocation loops by the implantation of He ions and subsequent thermal annealing. The structural features of this defect microstructure are investigated by transmission electron microscopy. High-resolution X-ray diffraction in a parallel beam configuration is used to quantify the strain state of the top SiC layer. Further annealing experiments were carried out in order to emulate typical process conditions for the growth of wide-bandgap semiconductors like, for example GaN. It is found that prolonged annealing at elevated temperatures leads to coarsening of the voids and to a much less efficient strain reduction. We show that this issue can be resolved by the co-implantation of oxygen to form highly thermally stable cavity/extended defect structures. The technique presented here may be useful for a variety of other thermally mismatched bulk/thin film couples as well. article_type: original author: - first_name: Maik full_name: Häberlen, Maik last_name: Häberlen - first_name: Brian full_name: Murphy, Brian last_name: Murphy - first_name: Bernd full_name: Stritzker, Bernd last_name: Stritzker - first_name: Jörg full_name: Lindner, Jörg id: '20797' last_name: Lindner citation: ama: Häberlen M, Murphy B, Stritzker B, Lindner J. Decoupling of a strained 3C-SiC(111) thin film on silicon by He+ and O+ ion implantation. physica status solidi (c). 2011;8(3):944-947. doi:10.1002/pssc.201000342 apa: Häberlen, M., Murphy, B., Stritzker, B., & Lindner, J. (2011). Decoupling of a strained 3C-SiC(111) thin film on silicon by He+ and O+ ion implantation. Physica Status Solidi (C), 8(3), 944–947. https://doi.org/10.1002/pssc.201000342 bibtex: '@article{Häberlen_Murphy_Stritzker_Lindner_2011, title={Decoupling of a strained 3C-SiC(111) thin film on silicon by He+ and O+ ion implantation}, volume={8}, DOI={10.1002/pssc.201000342}, number={3}, journal={physica status solidi (c)}, publisher={Wiley}, author={Häberlen, Maik and Murphy, Brian and Stritzker, Bernd and Lindner, Jörg}, year={2011}, pages={944–947} }' chicago: 'Häberlen, Maik, Brian Murphy, Bernd Stritzker, and Jörg Lindner. “Decoupling of a Strained 3C-SiC(111) Thin Film on Silicon by He+ and O+ Ion Implantation.” Physica Status Solidi (C) 8, no. 3 (2011): 944–47. https://doi.org/10.1002/pssc.201000342.' ieee: M. Häberlen, B. Murphy, B. Stritzker, and J. Lindner, “Decoupling of a strained 3C-SiC(111) thin film on silicon by He+ and O+ ion implantation,” physica status solidi (c), vol. 8, no. 3, pp. 944–947, 2011. mla: Häberlen, Maik, et al. “Decoupling of a Strained 3C-SiC(111) Thin Film on Silicon by He+ and O+ Ion Implantation.” Physica Status Solidi (C), vol. 8, no. 3, Wiley, 2011, pp. 944–47, doi:10.1002/pssc.201000342. short: M. Häberlen, B. Murphy, B. Stritzker, J. Lindner, Physica Status Solidi (C) 8 (2011) 944–947. date_created: 2018-08-27T12:31:20Z date_updated: 2022-01-06T07:00:24Z ddc: - '530' department: - _id: '286' doi: 10.1002/pssc.201000342 file: - access_level: closed content_type: application/pdf creator: hclaudia date_created: 2018-08-27T12:32:07Z date_updated: 2018-08-27T12:32:07Z file_id: '4143' file_name: Decoupling of a strained 3C-SiC(111) thin film on silicon by He+ and O+ ion implantation.pdf file_size: 152623 relation: main_file success: 1 file_date_updated: 2018-08-27T12:32:07Z has_accepted_license: '1' intvolume: ' 8' issue: '3' language: - iso: eng page: 944-947 publication: physica status solidi (c) publication_identifier: issn: - 1862-6351 publication_status: published publisher: Wiley status: public title: Decoupling of a strained 3C-SiC(111) thin film on silicon by He+ and O+ ion implantation type: journal_article user_id: '55706' volume: 8 year: '2011' ... --- _id: '4148' abstract: - lang: eng text: Photoluminescence spectra of Sm^(2+)-doped BaBr^2 have been measured under hydrostatic pressures up to 17 GPa at room temperature. In the low pressure range a red-shift of the broad 5d–4f transition of -145 cm^(-1)/GPa is observed. From 5 to 8 GPa a phase mixtureof the initial orthorhombic phase and the high-pressure monoclinic phase gives rise to two 5d–4f bands, which are strongly overlapping. Above 8 GPa the crystalis completely transformed to its high-pressure phase where two different Sm2^(2+) sites exist, but only one broad 5d–4f transition is detected. It exhibits are d-shift of -36 cm^(-1)/GPa. In addition,the line shifts of the (_^5)D_0→(_^7)F_J (J=0,1,2) transitions are investigated. Linear shifts of -19cm^(-1)/GPa for J=0,2 and of -13cm^(-1)/GPa for J01 are observed in the pressure range from 0 to 5 GPa. article_type: original author: - first_name: Marie Christin full_name: Wiegand, Marie Christin last_name: Wiegand - first_name: Werner full_name: Sievers, Werner last_name: Sievers - first_name: Jörg full_name: Lindner, Jörg id: '20797' last_name: Lindner - first_name: Th. full_name: Tröster, Th. last_name: Tröster - first_name: S. full_name: Schweizer, S. last_name: Schweizer citation: ama: Wiegand MC, Sievers W, Lindner J, Tröster T, Schweizer S. Photoluminescence properties of Sm2+-doped BaBr2 under hydrostatic pressure. Journal of Luminescence. 2011;131(11):2400-2403. doi:10.1016/j.jlumin.2011.05.035 apa: Wiegand, M. C., Sievers, W., Lindner, J., Tröster, T., & Schweizer, S. (2011). Photoluminescence properties of Sm2+-doped BaBr2 under hydrostatic pressure. Journal of Luminescence, 131(11), 2400–2403. https://doi.org/10.1016/j.jlumin.2011.05.035 bibtex: '@article{Wiegand_Sievers_Lindner_Tröster_Schweizer_2011, title={Photoluminescence properties of Sm2+-doped BaBr2 under hydrostatic pressure}, volume={131}, DOI={10.1016/j.jlumin.2011.05.035}, number={11}, journal={Journal of Luminescence}, publisher={Elsevier BV}, author={Wiegand, Marie Christin and Sievers, Werner and Lindner, Jörg and Tröster, Th. and Schweizer, S.}, year={2011}, pages={2400–2403} }' chicago: 'Wiegand, Marie Christin, Werner Sievers, Jörg Lindner, Th. Tröster, and S. Schweizer. “Photoluminescence Properties of Sm2+-Doped BaBr2 under Hydrostatic Pressure.” Journal of Luminescence 131, no. 11 (2011): 2400–2403. https://doi.org/10.1016/j.jlumin.2011.05.035.' ieee: M. C. Wiegand, W. Sievers, J. Lindner, T. Tröster, and S. Schweizer, “Photoluminescence properties of Sm2+-doped BaBr2 under hydrostatic pressure,” Journal of Luminescence, vol. 131, no. 11, pp. 2400–2403, 2011. mla: Wiegand, Marie Christin, et al. “Photoluminescence Properties of Sm2+-Doped BaBr2 under Hydrostatic Pressure.” Journal of Luminescence, vol. 131, no. 11, Elsevier BV, 2011, pp. 2400–03, doi:10.1016/j.jlumin.2011.05.035. short: M.C. Wiegand, W. Sievers, J. Lindner, T. Tröster, S. Schweizer, Journal of Luminescence 131 (2011) 2400–2403. date_created: 2018-08-27T12:44:42Z date_updated: 2022-01-06T07:00:25Z ddc: - '530' department: - _id: '15' - _id: '286' doi: 10.1016/j.jlumin.2011.05.035 file: - access_level: closed content_type: application/pdf creator: hclaudia date_created: 2018-08-27T12:45:30Z date_updated: 2018-08-27T12:45:30Z file_id: '4149' file_name: Photoluminescence properties of Sm(2+)-doped BaBr2 under hydrostatic pressure.pdf file_size: 279989 relation: main_file success: 1 file_date_updated: 2018-08-27T12:45:30Z has_accepted_license: '1' intvolume: ' 131' issue: '11' language: - iso: eng page: 2400-2403 publication: Journal of Luminescence publication_identifier: issn: - 0022-2313 publication_status: published publisher: Elsevier BV status: public title: Photoluminescence properties of Sm2+-doped BaBr2 under hydrostatic pressure type: journal_article user_id: '55706' volume: 131 year: '2011' ... --- _id: '4150' abstract: - lang: eng text: "Atomistic simulations on the silicon carbide precipitation in bulk silicon employing both, classical potential and\r\nfirst-principlesmethods are presented. The calculations aim at a comprehensive,microscopic understanding of the\r\nprecipitation mechanism in the context of controversial discussions in the literature. For the quantum-mechanical\r\ntreatment, basic processes assumed in the precipitation process are calculated in feasible systems of small\r\nsize. The migration mechanism of a carbon \x02100\x03 interstitial and silicon \x0211 0\x03 self-interstitial in otherwise\r\ndefect-free silicon are investigated using density functional theory calculations. The influence of a nearby\r\nvacancy, another carbon interstitial and a substitutional defect as well as a silicon self-interstitial has been\r\ninvestigated systematically. Interactions of various combinations of defects have been characterized including a\r\ncouple of selected migration pathways within these configurations. Most of the investigated pairs of defects tend\r\nto agglomerate allowing for a reduction in strain. The formation of structures involving strong carbon–carbon\r\nbonds turns out to be very unlikely. In contrast, substitutional carbon occurs in all probability. A long range\r\ncapture radius has been observed for pairs of interstitial carbon as well as interstitial carbon and vacancies. A\r\nrather small capture radius is predicted for substitutional carbon and silicon self-interstitials. Initial assumptions\r\nregarding the precipitation mechanism of silicon carbide in bulk silicon are established and conformability to\r\nexperimental findings is discussed. Furthermore, results of the accurate first-principles calculations on defects\r\nand carbon diffusion in silicon are compared to results of classical potential simulations revealing significant\r\nlimitations of the latter method. An approach to work around this problem is proposed. Finally, results of the\r\nclassical potential molecular dynamics simulations of large systems are examined, which reinforce previous\r\nassumptions and give further insight into basic processes involved in the silicon carbide transition." article_number: '064126' article_type: original author: - first_name: F. full_name: Zirkelbach, F. last_name: Zirkelbach - first_name: B. full_name: Stritzker, B. last_name: Stritzker - first_name: K. full_name: Nordlund, K. last_name: Nordlund - first_name: Jörg full_name: Lindner, Jörg id: '20797' last_name: Lindner - first_name: W. G. full_name: Schmidt, W. G. last_name: Schmidt - first_name: E. full_name: Rauls, E. last_name: Rauls citation: ama: Zirkelbach F, Stritzker B, Nordlund K, Lindner J, Schmidt WG, Rauls E. Combinedab initioand classical potential simulation study on silicon carbide precipitation in silicon. Physical Review B. 2011;84(6). doi:10.1103/physrevb.84.064126 apa: Zirkelbach, F., Stritzker, B., Nordlund, K., Lindner, J., Schmidt, W. G., & Rauls, E. (2011). Combinedab initioand classical potential simulation study on silicon carbide precipitation in silicon. Physical Review B, 84(6). https://doi.org/10.1103/physrevb.84.064126 bibtex: '@article{Zirkelbach_Stritzker_Nordlund_Lindner_Schmidt_Rauls_2011, title={Combinedab initioand classical potential simulation study on silicon carbide precipitation in silicon}, volume={84}, DOI={10.1103/physrevb.84.064126}, number={6064126}, journal={Physical Review B}, publisher={American Physical Society (APS)}, author={Zirkelbach, F. and Stritzker, B. and Nordlund, K. and Lindner, Jörg and Schmidt, W. G. and Rauls, E.}, year={2011} }' chicago: Zirkelbach, F., B. Stritzker, K. Nordlund, Jörg Lindner, W. G. Schmidt, and E. Rauls. “Combinedab Initioand Classical Potential Simulation Study on Silicon Carbide Precipitation in Silicon.” Physical Review B 84, no. 6 (2011). https://doi.org/10.1103/physrevb.84.064126. ieee: F. Zirkelbach, B. Stritzker, K. Nordlund, J. Lindner, W. G. Schmidt, and E. Rauls, “Combinedab initioand classical potential simulation study on silicon carbide precipitation in silicon,” Physical Review B, vol. 84, no. 6, 2011. mla: Zirkelbach, F., et al. “Combinedab Initioand Classical Potential Simulation Study on Silicon Carbide Precipitation in Silicon.” Physical Review B, vol. 84, no. 6, 064126, American Physical Society (APS), 2011, doi:10.1103/physrevb.84.064126. short: F. Zirkelbach, B. Stritzker, K. Nordlund, J. Lindner, W.G. Schmidt, E. Rauls, Physical Review B 84 (2011). date_created: 2018-08-27T13:17:45Z date_updated: 2022-01-06T07:00:26Z ddc: - '530' department: - _id: '15' - _id: '286' doi: 10.1103/physrevb.84.064126 file: - access_level: closed content_type: application/pdf creator: hclaudia date_created: 2018-08-27T13:18:53Z date_updated: 2018-08-27T13:18:53Z file_id: '4151' file_name: Combined ab initio and classical potential simulation study on silicon carbide precipitation in silicon.pdf file_size: 1541698 relation: main_file success: 1 file_date_updated: 2018-08-27T13:18:53Z has_accepted_license: '1' intvolume: ' 84' issue: '6' language: - iso: eng publication: Physical Review B publication_identifier: issn: - 1098-0121 - 1550-235X publication_status: published publisher: American Physical Society (APS) status: public title: Combinedab initioand classical potential simulation study on silicon carbide precipitation in silicon type: journal_article user_id: '55706' volume: 84 year: '2011' ... --- _id: '4157' author: - first_name: Burkhard full_name: Hehenkamp, Burkhard id: '37339' last_name: Hehenkamp - first_name: Oddvar full_name: Kaarboe, Oddvar last_name: Kaarboe citation: ama: Hehenkamp B, Kaarboe O. Paying for Performance in Hospitals. Economic Analysis and Policy. 2011;41(1):49-70. doi:10.1016/s0313-5926(11)50004-9 apa: Hehenkamp, B., & Kaarboe, O. (2011). Paying for Performance in Hospitals. Economic Analysis and Policy, 41(1), 49–70. https://doi.org/10.1016/s0313-5926(11)50004-9 bibtex: '@article{Hehenkamp_Kaarboe_2011, title={Paying for Performance in Hospitals}, volume={41}, DOI={10.1016/s0313-5926(11)50004-9}, number={1}, journal={Economic Analysis and Policy}, publisher={Elsevier BV}, author={Hehenkamp, Burkhard and Kaarboe, Oddvar}, year={2011}, pages={49–70} }' chicago: 'Hehenkamp, Burkhard, and Oddvar Kaarboe. “Paying for Performance in Hospitals.” Economic Analysis and Policy 41, no. 1 (2011): 49–70. https://doi.org/10.1016/s0313-5926(11)50004-9.' ieee: B. Hehenkamp and O. Kaarboe, “Paying for Performance in Hospitals,” Economic Analysis and Policy, vol. 41, no. 1, pp. 49–70, 2011. mla: Hehenkamp, Burkhard, and Oddvar Kaarboe. “Paying for Performance in Hospitals.” Economic Analysis and Policy, vol. 41, no. 1, Elsevier BV, 2011, pp. 49–70, doi:10.1016/s0313-5926(11)50004-9. short: B. Hehenkamp, O. Kaarboe, Economic Analysis and Policy 41 (2011) 49–70. date_created: 2018-08-27T15:08:06Z date_updated: 2022-01-06T07:00:26Z department: - _id: '280' - _id: '475' doi: 10.1016/s0313-5926(11)50004-9 extern: '1' intvolume: ' 41' issue: '1' page: 49-70 publication: Economic Analysis and Policy publication_identifier: issn: - 0313-5926 publication_status: published publisher: Elsevier BV status: public title: Paying for Performance in Hospitals type: journal_article user_id: '37339' volume: 41 year: '2011' ... --- _id: '4171' abstract: - lang: eng text: The method involves exciting a quantum system with photons in a polarization state. Two states of the quantum system are excited with linear horizontal and vertical polarizations that are orthogonal to each other, where the states exhibit an energetic gap smaller than energetic bandwidth of photons. The states are assigned based on the polarizations, where the quantum system is arranged in a superposition state. The quantum system is formed by a quantum bit that is formed as a two-level system. - lang: eng text: Die Erfindung betrifft ein Verfahren zur Übertragung des Polarisationszustandes von Photonen in ein stationäres System, bei dem mit Photonen eines Polarisationszustandes ein Quanten-System angeregt wird, das zwei Zustände aufweist, die mit zueinander orthogonalen Polarisationen anregbar sind und deren energetischer Abstand kleiner ist als die energetische Bandbreite der Photonen, wobei beide Zustände in Abhängigkeit von der Polarisation besetzt werden und das Quantensystem einen Superpositionszustand beider Zustände einnimmt. application_date: 2010-05-18 application_number: '102010020817' author: - first_name: Jens full_name: Förstner, Jens id: '158' last_name: Förstner orcid: 0000-0001-7059-9862 - first_name: D. full_name: Mantei, D. last_name: Mantei - first_name: 'S. Michaelis ' full_name: 'de Vasconcellos, S. Michaelis ' last_name: de Vasconcellos - first_name: Artur full_name: Zrenner, Artur id: '606' last_name: Zrenner orcid: 0000-0002-5190-0944 citation: ama: Förstner J, Mantei D, de Vasconcellos SM, Zrenner A. Method for transmission of information about polarization state of photons to stationary system. 2011. apa: Förstner, J., Mantei, D., de Vasconcellos, S. M., & Zrenner, A. (2011). Method for transmission of information about polarization state of photons to stationary system. bibtex: '@article{Förstner_Mantei_de Vasconcellos_Zrenner_2011, title={Method for transmission of information about polarization state of photons to stationary system}, author={Förstner, Jens and Mantei, D. and de Vasconcellos, S. Michaelis and Zrenner, Artur}, year={2011} }' chicago: Förstner, Jens, D. Mantei, S. Michaelis de Vasconcellos, and Artur Zrenner. “Method for Transmission of Information about Polarization State of Photons to Stationary System,” 2011. ieee: J. Förstner, D. Mantei, S. M. de Vasconcellos, and A. Zrenner, “Method for transmission of information about polarization state of photons to stationary system.” 2011. mla: Förstner, Jens, et al. Method for Transmission of Information about Polarization State of Photons to Stationary System. 2011. short: J. Förstner, D. Mantei, S.M. de Vasconcellos, A. Zrenner, (2011). date_created: 2018-08-28T08:46:40Z date_updated: 2022-01-06T07:00:28Z department: - _id: '15' - _id: '290' ipc: G01J 4/00 ipn: DE102010020817A1 keyword: - tet_topic_qd main_file_link: - url: https://patents.google.com/patent/DE102010020817A1/en publication_date: 2011-11-24 status: public title: Method for transmission of information about polarization state of photons to stationary system type: patent user_id: '158' year: '2011' ... --- _id: '4377' abstract: - lang: eng text: Confocal Raman spectroscopy was performed as an archetype imaging method to study the ferroelectric domain structure of periodically poled lithium niobate. More precisely, the linkage out of spatial resolution and spectral information proved itself as very useful. Here a specific modulation of the Raman lines by the local variation of polarity and a non-symmetric measuring-signal across the domain structure were found, which allows for imaging of domain boundaries as well as oppositely orientated domains. The high potential of this method is demonstrated by the visualization of the ferroelectric domain structures based on various phonon modes. article_type: original author: - first_name: Gerhard full_name: Berth, Gerhard id: '53' last_name: Berth - first_name: Wjatscheslaw full_name: Hahn, Wjatscheslaw last_name: Hahn - first_name: Volker full_name: Wiedemeier, Volker last_name: Wiedemeier - first_name: Artur full_name: Zrenner, Artur id: '606' last_name: Zrenner orcid: 0000-0002-5190-0944 - first_name: Simone full_name: Sanna, Simone last_name: Sanna - first_name: Wolf Gero full_name: Schmidt, Wolf Gero last_name: Schmidt citation: ama: Berth G, Hahn W, Wiedemeier V, Zrenner A, Sanna S, Schmidt WG. Imaging of the Ferroelectric Domain Structures by Confocal Raman Spectroscopy. Ferroelectrics. 2011;420(1):44-48. doi:10.1080/00150193.2011.594774 apa: Berth, G., Hahn, W., Wiedemeier, V., Zrenner, A., Sanna, S., & Schmidt, W. G. (2011). Imaging of the Ferroelectric Domain Structures by Confocal Raman Spectroscopy. Ferroelectrics, 420(1), 44–48. https://doi.org/10.1080/00150193.2011.594774 bibtex: '@article{Berth_Hahn_Wiedemeier_Zrenner_Sanna_Schmidt_2011, title={Imaging of the Ferroelectric Domain Structures by Confocal Raman Spectroscopy}, volume={420}, DOI={10.1080/00150193.2011.594774}, number={1}, journal={Ferroelectrics}, publisher={Informa UK Limited}, author={Berth, Gerhard and Hahn, Wjatscheslaw and Wiedemeier, Volker and Zrenner, Artur and Sanna, Simone and Schmidt, Wolf Gero}, year={2011}, pages={44–48} }' chicago: 'Berth, Gerhard, Wjatscheslaw Hahn, Volker Wiedemeier, Artur Zrenner, Simone Sanna, and Wolf Gero Schmidt. “Imaging of the Ferroelectric Domain Structures by Confocal Raman Spectroscopy.” Ferroelectrics 420, no. 1 (2011): 44–48. https://doi.org/10.1080/00150193.2011.594774.' ieee: G. Berth, W. Hahn, V. Wiedemeier, A. Zrenner, S. Sanna, and W. G. Schmidt, “Imaging of the Ferroelectric Domain Structures by Confocal Raman Spectroscopy,” Ferroelectrics, vol. 420, no. 1, pp. 44–48, 2011. mla: Berth, Gerhard, et al. “Imaging of the Ferroelectric Domain Structures by Confocal Raman Spectroscopy.” Ferroelectrics, vol. 420, no. 1, Informa UK Limited, 2011, pp. 44–48, doi:10.1080/00150193.2011.594774. short: G. Berth, W. Hahn, V. Wiedemeier, A. Zrenner, S. Sanna, W.G. Schmidt, Ferroelectrics 420 (2011) 44–48. date_created: 2018-09-11T14:10:35Z date_updated: 2022-01-06T07:01:00Z department: - _id: '15' - _id: '230' - _id: '35' doi: 10.1080/00150193.2011.594774 intvolume: ' 420' issue: '1' keyword: - Raman spectroscopy - ferroelectric domains - LiNbO3 - confocal imaging language: - iso: eng page: 44-48 publication: Ferroelectrics publication_identifier: issn: - 0015-0193 - 1563-5112 publication_status: published publisher: Informa UK Limited status: public title: Imaging of the Ferroelectric Domain Structures by Confocal Raman Spectroscopy type: journal_article user_id: '49428' volume: 420 year: '2011' ... --- _id: '4378' abstract: - lang: eng text: Using a combined all-ultra-high-vacuum process employing lateral patterning with focused ion beams and molecular beam epitaxy, site-selective growth of single (In,Ga)As quantum dots is achieved. We have embedded such a layer of intentionally positioned quantum dots in the intrinsic region of a p-i-n junction so that the quantum dots can be driven electrically. In this contribution, we will present our results on the morphological properties of the ion-beam modified surface on which the quantum dot nucleation occurs together with a characterization of the electrical and optoelectronic properties. We will demonstrate that a single, individual quantum dot can directly be electrically addressed. article_type: original author: - first_name: Minisha full_name: Mehta, Minisha last_name: Mehta - first_name: Dirk full_name: Reuter, Dirk id: '37763' last_name: Reuter - first_name: Andreas D. full_name: Wieck, Andreas D. last_name: Wieck - first_name: Steffen full_name: Michaelis de Vasconcellos, Steffen last_name: Michaelis de Vasconcellos - first_name: Artur full_name: Zrenner, Artur id: '606' last_name: Zrenner orcid: 0000-0002-5190-0944 - first_name: Cedrik full_name: Meier, Cedrik id: '20798' last_name: Meier orcid: https://orcid.org/0000-0002-3787-3572 citation: ama: Mehta M, Reuter D, Wieck AD, Michaelis de Vasconcellos S, Zrenner A, Meier C. Electrically driven intentionally positioned single quantum dot. physica status solidi (c). 2011;8(4):1182-1185. doi:10.1002/pssc.201000828 apa: Mehta, M., Reuter, D., Wieck, A. D., Michaelis de Vasconcellos, S., Zrenner, A., & Meier, C. (2011). Electrically driven intentionally positioned single quantum dot. Physica Status Solidi (C), 8(4), 1182–1185. https://doi.org/10.1002/pssc.201000828 bibtex: '@article{Mehta_Reuter_Wieck_Michaelis de Vasconcellos_Zrenner_Meier_2011, title={Electrically driven intentionally positioned single quantum dot}, volume={8}, DOI={10.1002/pssc.201000828}, number={4}, journal={physica status solidi (c)}, publisher={Wiley}, author={Mehta, Minisha and Reuter, Dirk and Wieck, Andreas D. and Michaelis de Vasconcellos, Steffen and Zrenner, Artur and Meier, Cedrik}, year={2011}, pages={1182–1185} }' chicago: 'Mehta, Minisha, Dirk Reuter, Andreas D. Wieck, Steffen Michaelis de Vasconcellos, Artur Zrenner, and Cedrik Meier. “Electrically Driven Intentionally Positioned Single Quantum Dot.” Physica Status Solidi (C) 8, no. 4 (2011): 1182–85. https://doi.org/10.1002/pssc.201000828.' ieee: M. Mehta, D. Reuter, A. D. Wieck, S. Michaelis de Vasconcellos, A. Zrenner, and C. Meier, “Electrically driven intentionally positioned single quantum dot,” physica status solidi (c), vol. 8, no. 4, pp. 1182–1185, 2011. mla: Mehta, Minisha, et al. “Electrically Driven Intentionally Positioned Single Quantum Dot.” Physica Status Solidi (C), vol. 8, no. 4, Wiley, 2011, pp. 1182–85, doi:10.1002/pssc.201000828. short: M. Mehta, D. Reuter, A.D. Wieck, S. Michaelis de Vasconcellos, A. Zrenner, C. Meier, Physica Status Solidi (C) 8 (2011) 1182–1185. date_created: 2018-09-11T14:15:28Z date_updated: 2022-01-06T07:01:00Z department: - _id: '15' - _id: '230' - _id: '35' - _id: '287' doi: 10.1002/pssc.201000828 intvolume: ' 8' issue: '4' keyword: - molecular beam epitaxy - quantum dot - site control - electroluminescence language: - iso: eng page: 1182-1185 publication: physica status solidi (c) publication_identifier: issn: - 1862-6351 publication_status: published publisher: Wiley status: public title: Electrically driven intentionally positioned single quantum dot type: journal_article user_id: '20798' volume: 8 year: '2011' ... --- _id: '4379' abstract: - lang: eng text: Uniform mesoporous Si double layers are formed on 4 inch p-type < 100> wafers with an off orientation of 6º towards < 111> by means of electrochemical etching in ethanoic-based HF electrolytes. These substrates are of interest for the epitaxial growth of III–V compound semiconductor stacks on their top for the production of multi-junction solar cells and very thin electronic devices. We demonstrate transfer of porous layers after an annealing process in hydrogen atmosphere. Electron Back-Scatter Diffraction analysis confirms that the substrate orientation is conserved during the etching and annealing steps. Confocal μ-Raman spectroscopy analysis shows a decrease in the Raman signal intensity after etching and a subsequent increase after annealing while no shift is observed. By means of Atomic Force Microscopy, analysis the surface appearance after the etching and annealing steps can be visualized. The mean surface roughness varies during the process from 0.55 nm for the unprocessed wafers to 0.27 nm after etching and 0.78 nm after annealing. The decrease of average roughness after etching is caused by an electropolishing step prior to porous formation. Despite of slight increase of mean surface roughness after annealing the samples are still appropriate for high quality epitaxial growth and subsequent lift-off. article_type: original author: - first_name: E. full_name: Garralaga Rojas, E. last_name: Garralaga Rojas - first_name: B. full_name: Terheiden, B. last_name: Terheiden - first_name: H. full_name: Plagwitz, H. last_name: Plagwitz - first_name: J. full_name: Hensen, J. last_name: Hensen - first_name: V. full_name: Wiedemeier, V. last_name: Wiedemeier - first_name: Gerhard full_name: Berth, Gerhard id: '53' last_name: Berth - first_name: Artur full_name: Zrenner, Artur id: '606' last_name: Zrenner orcid: 0000-0002-5190-0944 - first_name: R. full_name: Brendel, R. last_name: Brendel citation: ama: Garralaga Rojas E, Terheiden B, Plagwitz H, et al. Lift-off of mesoporous layers by electrochemical etching on Si (100) substrates with miscut of 6° off towards (111). Thin Solid Films. 2011;520(1):606-609. doi:10.1016/j.tsf.2011.07.063 apa: Garralaga Rojas, E., Terheiden, B., Plagwitz, H., Hensen, J., Wiedemeier, V., Berth, G., … Brendel, R. (2011). Lift-off of mesoporous layers by electrochemical etching on Si (100) substrates with miscut of 6° off towards (111). Thin Solid Films, 520(1), 606–609. https://doi.org/10.1016/j.tsf.2011.07.063 bibtex: '@article{Garralaga Rojas_Terheiden_Plagwitz_Hensen_Wiedemeier_Berth_Zrenner_Brendel_2011, title={Lift-off of mesoporous layers by electrochemical etching on Si (100) substrates with miscut of 6° off towards (111)}, volume={520}, DOI={10.1016/j.tsf.2011.07.063}, number={1}, journal={Thin Solid Films}, publisher={Elsevier BV}, author={Garralaga Rojas, E. and Terheiden, B. and Plagwitz, H. and Hensen, J. and Wiedemeier, V. and Berth, Gerhard and Zrenner, Artur and Brendel, R.}, year={2011}, pages={606–609} }' chicago: 'Garralaga Rojas, E., B. Terheiden, H. Plagwitz, J. Hensen, V. Wiedemeier, Gerhard Berth, Artur Zrenner, and R. Brendel. “Lift-off of Mesoporous Layers by Electrochemical Etching on Si (100) Substrates with Miscut of 6° off towards (111).” Thin Solid Films 520, no. 1 (2011): 606–9. https://doi.org/10.1016/j.tsf.2011.07.063.' ieee: E. Garralaga Rojas et al., “Lift-off of mesoporous layers by electrochemical etching on Si (100) substrates with miscut of 6° off towards (111),” Thin Solid Films, vol. 520, no. 1, pp. 606–609, 2011. mla: Garralaga Rojas, E., et al. “Lift-off of Mesoporous Layers by Electrochemical Etching on Si (100) Substrates with Miscut of 6° off towards (111).” Thin Solid Films, vol. 520, no. 1, Elsevier BV, 2011, pp. 606–09, doi:10.1016/j.tsf.2011.07.063. short: E. Garralaga Rojas, B. Terheiden, H. Plagwitz, J. Hensen, V. Wiedemeier, G. Berth, A. Zrenner, R. Brendel, Thin Solid Films 520 (2011) 606–609. date_created: 2018-09-11T14:21:12Z date_updated: 2022-01-06T07:01:00Z department: - _id: '15' - _id: '230' - _id: '35' doi: 10.1016/j.tsf.2011.07.063 intvolume: ' 520' issue: '1' keyword: - Porous Si - Layer transfer - Thin-film - Photovoltaics language: - iso: eng page: 606-609 publication: Thin Solid Films publication_identifier: issn: - 0040-6090 publication_status: published publisher: Elsevier BV status: public title: Lift-off of mesoporous layers by electrochemical etching on Si (100) substrates with miscut of 6° off towards (111) type: journal_article user_id: '49428' volume: 520 year: '2011' ... --- _id: '5038' author: - first_name: Jörg full_name: Becker, Jörg last_name: Becker - first_name: Daniel full_name: Beverungen, Daniel id: '59677' last_name: Beverungen - first_name: Ralf full_name: Knackstedt, Ralf last_name: Knackstedt - first_name: Martin full_name: Matzner, Martin last_name: Matzner - first_name: Oliver full_name: Müller, Oliver id: '72849' last_name: Müller - first_name: Jens full_name: Pöppelbuß, Jens last_name: Pöppelbuß citation: ama: 'Becker J, Beverungen D, Knackstedt R, Matzner M, Müller O, Pöppelbuß J. Integrierte Informationslogistik in der hybriden Wertschöpfung. In: Gatermann I, Fleck M, eds. Mit Dienstleistungen Die Zukunft Gestalten: Impulse Aus Forschung Und Praxis. Beiträge Der 8. Dienstleistungstagung Des BMBF. Frankfurt am Main; 2011:247--255.' apa: 'Becker, J., Beverungen, D., Knackstedt, R., Matzner, M., Müller, O., & Pöppelbuß, J. (2011). Integrierte Informationslogistik in der hybriden Wertschöpfung. In I. Gatermann & M. Fleck (Eds.), Mit Dienstleistungen die Zukunft gestalten: Impulse aus Forschung und Praxis. Beiträge der 8. Dienstleistungstagung des BMBF (pp. 247--255). Frankfurt am Main.' bibtex: '@inbook{Becker_Beverungen_Knackstedt_Matzner_Müller_Pöppelbuß_2011, place={Frankfurt am Main}, title={Integrierte Informationslogistik in der hybriden Wertschöpfung}, booktitle={Mit Dienstleistungen die Zukunft gestalten: Impulse aus Forschung und Praxis. Beiträge der 8. Dienstleistungstagung des BMBF}, author={Becker, Jörg and Beverungen, Daniel and Knackstedt, Ralf and Matzner, Martin and Müller, Oliver and Pöppelbuß, Jens}, editor={Gatermann, Inken and Fleck, MyriamEditors}, year={2011}, pages={247--255} }' chicago: 'Becker, Jörg, Daniel Beverungen, Ralf Knackstedt, Martin Matzner, Oliver Müller, and Jens Pöppelbuß. “Integrierte Informationslogistik in Der Hybriden Wertschöpfung.” In Mit Dienstleistungen Die Zukunft Gestalten: Impulse Aus Forschung Und Praxis. Beiträge Der 8. Dienstleistungstagung Des BMBF, edited by Inken Gatermann and Myriam Fleck, 247--255. Frankfurt am Main, 2011.' ieee: 'J. Becker, D. Beverungen, R. Knackstedt, M. Matzner, O. Müller, and J. Pöppelbuß, “Integrierte Informationslogistik in der hybriden Wertschöpfung,” in Mit Dienstleistungen die Zukunft gestalten: Impulse aus Forschung und Praxis. Beiträge der 8. Dienstleistungstagung des BMBF, I. Gatermann and M. Fleck, Eds. Frankfurt am Main, 2011, pp. 247--255.' mla: 'Becker, Jörg, et al. “Integrierte Informationslogistik in Der Hybriden Wertschöpfung.” Mit Dienstleistungen Die Zukunft Gestalten: Impulse Aus Forschung Und Praxis. Beiträge Der 8. Dienstleistungstagung Des BMBF, edited by Inken Gatermann and Myriam Fleck, 2011, pp. 247--255.' short: 'J. Becker, D. Beverungen, R. Knackstedt, M. Matzner, O. Müller, J. Pöppelbuß, in: I. Gatermann, M. Fleck (Eds.), Mit Dienstleistungen Die Zukunft Gestalten: Impulse Aus Forschung Und Praxis. Beiträge Der 8. Dienstleistungstagung Des BMBF, Frankfurt am Main, 2011, pp. 247--255.' date_created: 2018-10-30T13:42:26Z date_updated: 2022-01-06T07:01:35Z department: - _id: '526' editor: - first_name: Inken full_name: Gatermann, Inken last_name: Gatermann - first_name: Myriam full_name: Fleck, Myriam last_name: Fleck extern: '1' language: - iso: eng page: 247--255 place: Frankfurt am Main publication: 'Mit Dienstleistungen die Zukunft gestalten: Impulse aus Forschung und Praxis. Beiträge der 8. Dienstleistungstagung des BMBF' status: public title: Integrierte Informationslogistik in der hybriden Wertschöpfung type: book_chapter user_id: '21671' year: '2011' ... --- _id: '5039' author: - first_name: Jörg full_name: Becker, Jörg last_name: Becker - first_name: Daniel full_name: Beverungen, Daniel id: '59677' last_name: Beverungen - first_name: Ralf full_name: Knackstedt, Ralf last_name: Knackstedt - first_name: Armin full_name: Stein, Armin last_name: Stein citation: ama: 'Becker J, Beverungen D, Knackstedt R, Stein A. Engineering, Sales, and Delivery of Modular Value Bundles --- A Framework for Configurative Modeling. In: Böhmann T, Burr W, Herrmann T, Krcmar H, eds. Implementing International Services: A Tailorable Method for Market Assessment, Modularization, and Process Transfer. Wiesbaden; 2011:399--424.' apa: 'Becker, J., Beverungen, D., Knackstedt, R., & Stein, A. (2011). Engineering, Sales, and Delivery of Modular Value Bundles --- A Framework for Configurative Modeling. In T. Böhmann, W. Burr, T. Herrmann, & H. Krcmar (Eds.), Implementing International Services: A tailorable method for market assessment, modularization, and process transfer (pp. 399--424). Wiesbaden.' bibtex: '@inbook{Becker_Beverungen_Knackstedt_Stein_2011, place={Wiesbaden}, title={Engineering, Sales, and Delivery of Modular Value Bundles --- A Framework for Configurative Modeling}, booktitle={Implementing International Services: A tailorable method for market assessment, modularization, and process transfer}, author={Becker, Jörg and Beverungen, Daniel and Knackstedt, Ralf and Stein, Armin}, editor={Böhmann, T and Burr, W and Herrmann, T and Krcmar, HEditors}, year={2011}, pages={399--424} }' chicago: 'Becker, Jörg, Daniel Beverungen, Ralf Knackstedt, and Armin Stein. “Engineering, Sales, and Delivery of Modular Value Bundles --- A Framework for Configurative Modeling.” In Implementing International Services: A Tailorable Method for Market Assessment, Modularization, and Process Transfer, edited by T Böhmann, W Burr, T Herrmann, and H Krcmar, 399--424. Wiesbaden, 2011.' ieee: 'J. Becker, D. Beverungen, R. Knackstedt, and A. Stein, “Engineering, Sales, and Delivery of Modular Value Bundles --- A Framework for Configurative Modeling,” in Implementing International Services: A tailorable method for market assessment, modularization, and process transfer, T. Böhmann, W. Burr, T. Herrmann, and H. Krcmar, Eds. Wiesbaden, 2011, pp. 399--424.' mla: 'Becker, Jörg, et al. “Engineering, Sales, and Delivery of Modular Value Bundles --- A Framework for Configurative Modeling.” Implementing International Services: A Tailorable Method for Market Assessment, Modularization, and Process Transfer, edited by T Böhmann et al., 2011, pp. 399--424.' short: 'J. Becker, D. Beverungen, R. Knackstedt, A. Stein, in: T. Böhmann, W. Burr, T. Herrmann, H. Krcmar (Eds.), Implementing International Services: A Tailorable Method for Market Assessment, Modularization, and Process Transfer, Wiesbaden, 2011, pp. 399--424.' date_created: 2018-10-30T13:43:06Z date_updated: 2022-01-06T07:01:35Z department: - _id: '526' editor: - first_name: T full_name: Böhmann, T last_name: Böhmann - first_name: W full_name: Burr, W last_name: Burr - first_name: T full_name: Herrmann, T last_name: Herrmann - first_name: H full_name: Krcmar, H last_name: Krcmar extern: '1' page: 399--424 place: Wiesbaden publication: 'Implementing International Services: A tailorable method for market assessment, modularization, and process transfer' publication_identifier: isbn: - 978-3-8349-1577-1 status: public title: Engineering, Sales, and Delivery of Modular Value Bundles --- A Framework for Configurative Modeling type: book_chapter user_id: '21671' year: '2011' ...