---
_id: '9867'
abstract:
- lang: eng
text: We report the piezoelectric properties of CuO-doped hydrothermal (K,Na)NbO3
ceramics that can be applied as hard-type lead-free piezoelectric ceramics. To
date, we have succeeded in synthesizing high-quality KNbO3 and NaNbO3 powders
by the hydrothermal method, which is based on an ionic reaction at high temperature
(around 210 $\,^{\circ}$C) and pressure. Increasing both the piezoelectric constant
d and the mechanical quality factor (Qm) is important for resonance-type piezoelectric
devices, such as ultrasonic motors and transformers. CuO doping into hydrothermal
(K,Na)NbO3 ceramics was examined to realize hard-type lead-free piezoelectric
ceramics. By doping with 1.2 mol \% CuO, Qm was increased and the dielectric loss
(tan δ) was decreased to 0.5\%. The grain size was also influenced by the amount
of CuO doping, which indicates that Qm is related to the density. To achieve a
higher Qm value, the grain size is required to be less than 5 µm; however, excessive
CuO doping leads to anomalous grain growth. Optimal piezoelectric properties were
obtained for 1.2 mol \% CuO-doped (K,Na)NbO3; k31 = 0.32, d31 = -44 pC/N, Qm (radial)
= 959, and tan δ= 0.5\%. These characteristics showed that CuO doping with hydrothermal
powders is effective for obtaining hard-type ceramics, and the mechanical quality
factor is more than ten times higher than that of nondoped hydrothermal (K,Na)NbO3
ceramics. Therefore, compared with the conventional solid-state method, we could
succeed in obtaining hard-type ceramics by a simple and short process.
author:
- first_name: Yuriko
full_name: Yokouchi, Yuriko
last_name: Yokouchi
- first_name: Takafumi
full_name: Maeda, Takafumi
last_name: Maeda
- first_name: Peter
full_name: Bornmann, Peter
last_name: Bornmann
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
- first_name: Takeshi
full_name: Morita, Takeshi
last_name: Morita
citation:
ama: Yokouchi Y, Maeda T, Bornmann P, Hemsel T, Morita T. Piezoelectric Properties
of CuO-Doped (K,Na)NbO3 Lead-Free Ceramics Synthesized with Hydrothermal Powders.
Japanese Journal of Applied Physics. 2013;52(7S). doi:10.7567/JJAP.52.07HB03
apa: Yokouchi, Y., Maeda, T., Bornmann, P., Hemsel, T., & Morita, T. (2013).
Piezoelectric Properties of CuO-Doped (K,Na)NbO3 Lead-Free Ceramics Synthesized
with Hydrothermal Powders. Japanese Journal of Applied Physics, 52(7S).
https://doi.org/10.7567/JJAP.52.07HB03
bibtex: '@article{Yokouchi_Maeda_Bornmann_Hemsel_Morita_2013, title={Piezoelectric
Properties of CuO-Doped (K,Na)NbO3 Lead-Free Ceramics Synthesized with Hydrothermal
Powders}, volume={52}, DOI={10.7567/JJAP.52.07HB03},
number={7S}, journal={Japanese Journal of Applied Physics}, author={Yokouchi,
Yuriko and Maeda, Takafumi and Bornmann, Peter and Hemsel, Tobias and Morita,
Takeshi}, year={2013} }'
chicago: Yokouchi, Yuriko, Takafumi Maeda, Peter Bornmann, Tobias Hemsel, and Takeshi
Morita. “Piezoelectric Properties of CuO-Doped (K,Na)NbO3 Lead-Free Ceramics Synthesized
with Hydrothermal Powders.” Japanese Journal of Applied Physics 52, no.
7S (2013). https://doi.org/10.7567/JJAP.52.07HB03.
ieee: Y. Yokouchi, T. Maeda, P. Bornmann, T. Hemsel, and T. Morita, “Piezoelectric
Properties of CuO-Doped (K,Na)NbO3 Lead-Free Ceramics Synthesized with Hydrothermal
Powders,” Japanese Journal of Applied Physics, vol. 52, no. 7S, 2013.
mla: Yokouchi, Yuriko, et al. “Piezoelectric Properties of CuO-Doped (K,Na)NbO3
Lead-Free Ceramics Synthesized with Hydrothermal Powders.” Japanese Journal
of Applied Physics, vol. 52, no. 7S, 2013, doi:10.7567/JJAP.52.07HB03.
short: Y. Yokouchi, T. Maeda, P. Bornmann, T. Hemsel, T. Morita, Japanese Journal
of Applied Physics 52 (2013).
date_created: 2019-05-20T12:06:04Z
date_updated: 2019-05-20T12:08:02Z
department:
- _id: '151'
doi: 10.7567/JJAP.52.07HB03
intvolume: ' 52'
issue: 7S
language:
- iso: eng
publication: Japanese Journal of Applied Physics
status: public
title: Piezoelectric Properties of CuO-Doped (K,Na)NbO3 Lead-Free Ceramics Synthesized
with Hydrothermal Powders
type: journal_article
user_id: '55222'
volume: 52
year: '2013'
...
---
_id: '3959'
abstract:
- lang: eng
text: Microresonators containing quantum dots find application in devices like single
photon emitters for quantum information technology as well as low threshold laser
devices. We demonstrate the fabrication of 60 nm thin zinc-blende AlN microdisks
including cubic GaN quantum dots using dry chemical etching techniques. Scanning
electron microscopy analysis reveals the morphology with smooth surfaces of the
microdisks. Micro-photoluminescence measurements exhibit optically active quantum
dots. Furthermore this is the first report of resonator modes in the emission
spectrum of a cubic AlN microdisk.
article_type: original
author:
- first_name: M.
full_name: Bürger, M.
last_name: Bürger
- first_name: R.M.
full_name: Kemper, R.M.
last_name: Kemper
- first_name: C.A.
full_name: Bader, C.A.
last_name: Bader
- first_name: M.
full_name: Ruth, M.
last_name: Ruth
- first_name: S.
full_name: Declair, S.
last_name: Declair
- first_name: Cedrik
full_name: Meier, Cedrik
id: '20798'
last_name: Meier
orcid: https://orcid.org/0000-0002-3787-3572
- first_name: Jens
full_name: Förstner, Jens
id: '158'
last_name: Förstner
orcid: 0000-0001-7059-9862
- first_name: D.J.
full_name: As, D.J.
last_name: As
citation:
ama: Bürger M, Kemper RM, Bader CA, et al. Cubic GaN quantum dots embedded in zinc-blende
AlN microdisks. Journal of Crystal Growth. 2013;378:287-290. doi:10.1016/j.jcrysgro.2012.12.058
apa: Bürger, M., Kemper, R. M., Bader, C. A., Ruth, M., Declair, S., Meier, C.,
… As, D. J. (2013). Cubic GaN quantum dots embedded in zinc-blende AlN microdisks.
Journal of Crystal Growth, 378, 287–290. https://doi.org/10.1016/j.jcrysgro.2012.12.058
bibtex: '@article{Bürger_Kemper_Bader_Ruth_Declair_Meier_Förstner_As_2013, title={Cubic
GaN quantum dots embedded in zinc-blende AlN microdisks}, volume={378}, DOI={10.1016/j.jcrysgro.2012.12.058},
journal={Journal of Crystal Growth}, publisher={Elsevier BV}, author={Bürger,
M. and Kemper, R.M. and Bader, C.A. and Ruth, M. and Declair, S. and Meier, Cedrik
and Förstner, Jens and As, D.J.}, year={2013}, pages={287–290} }'
chicago: 'Bürger, M., R.M. Kemper, C.A. Bader, M. Ruth, S. Declair, Cedrik Meier,
Jens Förstner, and D.J. As. “Cubic GaN Quantum Dots Embedded in Zinc-Blende AlN
Microdisks.” Journal of Crystal Growth 378 (2013): 287–90. https://doi.org/10.1016/j.jcrysgro.2012.12.058.'
ieee: M. Bürger et al., “Cubic GaN quantum dots embedded in zinc-blende AlN
microdisks,” Journal of Crystal Growth, vol. 378, pp. 287–290, 2013.
mla: Bürger, M., et al. “Cubic GaN Quantum Dots Embedded in Zinc-Blende AlN Microdisks.”
Journal of Crystal Growth, vol. 378, Elsevier BV, 2013, pp. 287–90, doi:10.1016/j.jcrysgro.2012.12.058.
short: M. Bürger, R.M. Kemper, C.A. Bader, M. Ruth, S. Declair, C. Meier, J. Förstner,
D.J. As, Journal of Crystal Growth 378 (2013) 287–290.
date_created: 2018-08-21T07:33:08Z
date_updated: 2022-01-06T07:00:00Z
ddc:
- '530'
department:
- _id: '15'
doi: 10.1016/j.jcrysgro.2012.12.058
file:
- access_level: closed
content_type: application/pdf
creator: hclaudia
date_created: 2018-08-21T07:34:05Z
date_updated: 2018-08-21T07:34:05Z
file_id: '3960'
file_name: 2013-01 Bürger,Kemper,Bader,Ruth,Declair,Meier,Förstner,As_Cubic GaN
quantum dots embedded in zinc-blende AlN microdisks.pdf
file_size: 532153
relation: main_file
success: 1
file_date_updated: 2018-08-21T07:34:05Z
has_accepted_license: '1'
intvolume: ' 378'
keyword:
- tet_topic_qd
- tet_topic_microdisk
language:
- iso: eng
page: 287-290
publication: Journal of Crystal Growth
publication_identifier:
issn:
- 0022-0248
publication_status: published
publisher: Elsevier BV
status: public
title: Cubic GaN quantum dots embedded in zinc-blende AlN microdisks
type: journal_article
user_id: '55706'
volume: 378
year: '2013'
...
---
_id: '3963'
abstract:
- lang: eng
text: "Whispering gallery modes (WGMs) were observed in 60 nm thin cubic AlN microdisk
resonators containing a single layer of non-polar cubic GaN quantum dots. Freestanding
microdisks were patterned by means of electron beam lithography and a two step
reactive ion etching process. Micro-photoluminescence spectroscopy investigations
were performed for optical characterization. We analyzed the mode spacing for
disk diameters ranging from 2-4 lm. Numerical investigations using three dimensional
finite difference time domain calculations were in good agreement\r\nwith the
experimental data. Whispering gallery modes of the radial orders 1 and 2 were
identified by means of simulated mode field distributions."
article_type: original
author:
- first_name: M.
full_name: Bürger, M.
last_name: Bürger
- first_name: M.
full_name: Ruth, M.
last_name: Ruth
- first_name: S.
full_name: Declair, S.
last_name: Declair
- first_name: Jens
full_name: Förstner, Jens
id: '158'
last_name: Förstner
orcid: 0000-0001-7059-9862
- first_name: Cedrik
full_name: Meier, Cedrik
id: '20798'
last_name: Meier
orcid: https://orcid.org/0000-0002-3787-3572
- first_name: Donat Josef
full_name: As, Donat Josef
id: '14'
last_name: As
orcid: 0000-0003-1121-3565
citation:
ama: Bürger M, Ruth M, Declair S, Förstner J, Meier C, As DJ. Whispering gallery
modes in zinc-blende AlN microdisks containing non-polar GaN quantum dots. Applied
Physics Letters. 2013;102(8):081105. doi:10.1063/1.4793653
apa: Bürger, M., Ruth, M., Declair, S., Förstner, J., Meier, C., & As, D. J.
(2013). Whispering gallery modes in zinc-blende AlN microdisks containing non-polar
GaN quantum dots. Applied Physics Letters, 102(8), 081105. https://doi.org/10.1063/1.4793653
bibtex: '@article{Bürger_Ruth_Declair_Förstner_Meier_As_2013, title={Whispering
gallery modes in zinc-blende AlN microdisks containing non-polar GaN quantum dots},
volume={102}, DOI={10.1063/1.4793653},
number={8}, journal={Applied Physics Letters}, publisher={AIP Publishing}, author={Bürger,
M. and Ruth, M. and Declair, S. and Förstner, Jens and Meier, Cedrik and As, Donat
Josef}, year={2013}, pages={081105} }'
chicago: 'Bürger, M., M. Ruth, S. Declair, Jens Förstner, Cedrik Meier, and Donat
Josef As. “Whispering Gallery Modes in Zinc-Blende AlN Microdisks Containing Non-Polar
GaN Quantum Dots.” Applied Physics Letters 102, no. 8 (2013): 081105. https://doi.org/10.1063/1.4793653.'
ieee: M. Bürger, M. Ruth, S. Declair, J. Förstner, C. Meier, and D. J. As, “Whispering
gallery modes in zinc-blende AlN microdisks containing non-polar GaN quantum dots,”
Applied Physics Letters, vol. 102, no. 8, p. 081105, 2013.
mla: Bürger, M., et al. “Whispering Gallery Modes in Zinc-Blende AlN Microdisks
Containing Non-Polar GaN Quantum Dots.” Applied Physics Letters, vol. 102,
no. 8, AIP Publishing, 2013, p. 081105, doi:10.1063/1.4793653.
short: M. Bürger, M. Ruth, S. Declair, J. Förstner, C. Meier, D.J. As, Applied Physics
Letters 102 (2013) 081105.
date_created: 2018-08-21T07:43:22Z
date_updated: 2022-01-06T07:00:01Z
ddc:
- '530'
department:
- _id: '15'
- _id: '287'
- _id: '284'
- _id: '230'
- _id: '35'
doi: 10.1063/1.4793653
file:
- access_level: open_access
content_type: application/pdf
creator: hclaudia
date_created: 2018-08-21T07:47:02Z
date_updated: 2018-09-04T20:08:52Z
file_id: '3964'
file_name: 2013-02 Bürger,Ruth,Declair,Förstner,Meier,As_Whispering gallery modes
in zinc-blende AlN microdisks containing non-polar GaN quantum dots.pdf
file_size: 935911
relation: main_file
file_date_updated: 2018-09-04T20:08:52Z
has_accepted_license: '1'
intvolume: ' 102'
issue: '8'
keyword:
- tet_topic_qd
- tet_topic_microdisk
language:
- iso: eng
oa: '1'
page: '081105'
publication: Applied Physics Letters
publication_identifier:
issn:
- 0003-6951
- 1077-3118
publication_status: published
publisher: AIP Publishing
status: public
title: Whispering gallery modes in zinc-blende AlN microdisks containing non-polar
GaN quantum dots
type: journal_article
urn: '39635'
user_id: '14'
volume: 102
year: '2013'
...
---
_id: '3976'
author:
- first_name: Frauke
full_name: Bauhoff, Frauke
last_name: Bauhoff
- first_name: Martin
full_name: Schneider, Martin
last_name: Schneider
citation:
ama: 'Bauhoff F, Schneider M. „Sekret{\"a}rin des Vorstandes “gesucht: Stellenanzeigen
und die expressive Funktion des AGG. Industrielle Beziehungen/The German Journal
of Industrial Relations. 2013:54--76.'
apa: 'Bauhoff, F., & Schneider, M. (2013). „Sekret{\"a}rin des Vorstandes “gesucht:
Stellenanzeigen und die expressive Funktion des AGG. Industrielle Beziehungen/The
German Journal of Industrial Relations, 54--76.'
bibtex: '@article{Bauhoff_Schneider_2013, title={„Sekret{\"a}rin des Vorstandes
“gesucht: Stellenanzeigen und die expressive Funktion des AGG}, journal={Industrielle
Beziehungen/The German Journal of Industrial Relations}, author={Bauhoff, Frauke
and Schneider, Martin}, year={2013}, pages={54--76} }'
chicago: 'Bauhoff, Frauke, and Martin Schneider. “„Sekret{\"a}rin Des Vorstandes
“gesucht: Stellenanzeigen Und Die Expressive Funktion Des AGG.” Industrielle
Beziehungen/The German Journal of Industrial Relations, 2013, 54--76.'
ieee: 'F. Bauhoff and M. Schneider, “„Sekret{\"a}rin des Vorstandes “gesucht: Stellenanzeigen
und die expressive Funktion des AGG,” Industrielle Beziehungen/The German Journal
of Industrial Relations, pp. 54--76, 2013.'
mla: 'Bauhoff, Frauke, and Martin Schneider. “„Sekret{\"a}rin Des Vorstandes “gesucht:
Stellenanzeigen Und Die Expressive Funktion Des AGG.” Industrielle Beziehungen/The
German Journal of Industrial Relations, 2013, pp. 54--76.'
short: F. Bauhoff, M. Schneider, Industrielle Beziehungen/The German Journal of
Industrial Relations (2013) 54--76.
date_created: 2018-08-21T09:12:24Z
date_updated: 2022-01-06T07:00:04Z
department:
- _id: '19'
page: 54--76
publication: Industrielle Beziehungen/The German Journal of Industrial Relations
status: public
title: '„Sekret{\"a}rin des Vorstandes “gesucht: Stellenanzeigen und die expressive
Funktion des AGG'
type: journal_article
user_id: '54657'
year: '2013'
...
---
_id: '3979'
author:
- first_name: Frauke
full_name: Bauhoff, Frauke
last_name: Bauhoff
- first_name: Martin
full_name: Schneider, Martin
id: '471'
last_name: Schneider
orcid: https://orcid.org/0000-0002-6961-3716
citation:
ama: 'Bauhoff F, Schneider M. „Sekretärin des Vorstandes“ gesucht: Stellenanzeigen
und die expressive Funktion des AGG. Industrielle Beziehungen/The German Journal
of Industrial Relations. 2013:54--76.'
apa: 'Bauhoff, F., & Schneider, M. (2013). „Sekretärin des Vorstandes“ gesucht:
Stellenanzeigen und die expressive Funktion des AGG. Industrielle Beziehungen/The
German Journal of Industrial Relations, 54--76.'
bibtex: '@article{Bauhoff_Schneider_2013, title={„Sekretärin des Vorstandes“ gesucht:
Stellenanzeigen und die expressive Funktion des AGG}, journal={Industrielle Beziehungen/The
German Journal of Industrial Relations}, author={Bauhoff, Frauke and Schneider,
Martin}, year={2013}, pages={54--76} }'
chicago: 'Bauhoff, Frauke, and Martin Schneider. “„Sekretärin Des Vorstandes“ Gesucht:
Stellenanzeigen Und Die Expressive Funktion Des AGG.” Industrielle Beziehungen/The
German Journal of Industrial Relations, 2013, 54--76.'
ieee: 'F. Bauhoff and M. Schneider, “„Sekretärin des Vorstandes“ gesucht: Stellenanzeigen
und die expressive Funktion des AGG,” Industrielle Beziehungen/The German Journal
of Industrial Relations, pp. 54--76, 2013.'
mla: 'Bauhoff, Frauke, and Martin Schneider. “„Sekretärin Des Vorstandes“ Gesucht:
Stellenanzeigen Und Die Expressive Funktion Des AGG.” Industrielle Beziehungen/The
German Journal of Industrial Relations, 2013, pp. 54--76.'
short: F. Bauhoff, M. Schneider, Industrielle Beziehungen/The German Journal of
Industrial Relations (2013) 54--76.
date_created: 2018-08-21T09:23:38Z
date_updated: 2022-01-06T07:00:04Z
department:
- _id: '178'
- _id: '185'
page: 54--76
publication: Industrielle Beziehungen/The German Journal of Industrial Relations
status: public
title: '„Sekretärin des Vorstandes“ gesucht: Stellenanzeigen und die expressive Funktion
des AGG'
type: journal_article
user_id: '54657'
year: '2013'
...
---
_id: '4094'
author:
- first_name: R.M.
full_name: Kemper, R.M.
last_name: Kemper
- first_name: Donald
full_name: As, Donald
last_name: As
- first_name: Jörg
full_name: Lindner, Jörg
id: '20797'
last_name: Lindner
citation:
ama: 'Kemper RM, As D, Lindner J. Cubic GaN on nano-patterned 3C-SiC/Si (001) substrates.
In: Li H, Wu J, Wang ZM, eds. Silicon-Based Nanomaterials. Vol 187. Springer
Series in Materials Science; 2013:381-405.'
apa: Kemper, R. M., As, D., & Lindner, J. (2013). Cubic GaN on nano-patterned
3C-SiC/Si (001) substrates. In H. Li, J. Wu, & Z. M. Wang (Eds.), Silicon-based
Nanomaterials (Vol. 187, pp. 381–405). Springer Series in Materials Science.
bibtex: '@inbook{Kemper_As_Lindner_2013, title={Cubic GaN on nano-patterned 3C-SiC/Si
(001) substrates}, volume={187}, booktitle={Silicon-based Nanomaterials}, publisher={Springer
Series in Materials Science}, author={Kemper, R.M. and As, Donald and Lindner,
Jörg}, editor={Li, H. and Wu, J. and Wang, Z.M.Editors}, year={2013}, pages={381–405}
}'
chicago: Kemper, R.M., Donald As, and Jörg Lindner. “Cubic GaN on Nano-Patterned
3C-SiC/Si (001) Substrates.” In Silicon-Based Nanomaterials, edited by
H. Li, J. Wu, and Z.M. Wang, 187:381–405. Springer Series in Materials Science,
2013.
ieee: R. M. Kemper, D. As, and J. Lindner, “Cubic GaN on nano-patterned 3C-SiC/Si
(001) substrates,” in Silicon-based Nanomaterials, vol. 187, H. Li, J.
Wu, and Z. M. Wang, Eds. Springer Series in Materials Science, 2013, pp. 381–405.
mla: Kemper, R. M., et al. “Cubic GaN on Nano-Patterned 3C-SiC/Si (001) Substrates.”
Silicon-Based Nanomaterials, edited by H. Li et al., vol. 187, Springer
Series in Materials Science, 2013, pp. 381–405.
short: 'R.M. Kemper, D. As, J. Lindner, in: H. Li, J. Wu, Z.M. Wang (Eds.), Silicon-Based
Nanomaterials, Springer Series in Materials Science, 2013, pp. 381–405.'
date_created: 2018-08-23T12:34:23Z
date_updated: 2022-01-06T07:00:15Z
department:
- _id: '15'
- _id: '286'
editor:
- first_name: H.
full_name: Li, H.
last_name: Li
- first_name: J.
full_name: Wu, J.
last_name: Wu
- first_name: Z.M.
full_name: Wang, Z.M.
last_name: Wang
intvolume: ' 187'
language:
- iso: eng
page: 381-405
publication: Silicon-based Nanomaterials
publication_identifier:
eisbn:
- '978-1-4614-8169-0 '
isbn:
- 978-1-4614-8168-3
publication_status: published
publisher: Springer Series in Materials Science
status: public
title: Cubic GaN on nano-patterned 3C-SiC/Si (001) substrates
type: book_chapter
user_id: '55706'
volume: 187
year: '2013'
...
---
_id: '4097'
author:
- first_name: Katharina
full_name: Brassat, Katharina
id: '11305'
last_name: Brassat
- first_name: Johannes
full_name: Pauly, Johannes
last_name: Pauly
- first_name: R.
full_name: Kemper, R.
last_name: Kemper
- first_name: M.
full_name: Strake, M.
last_name: Strake
- first_name: Christoph
full_name: Brodehl, Christoph
id: '30380'
last_name: Brodehl
- first_name: Werner
full_name: Sievers, Werner
last_name: Sievers
- first_name: Thomas
full_name: Riedl, Thomas
id: '36950'
last_name: Riedl
- first_name: Jörg
full_name: Lindner, Jörg
id: '20797'
last_name: Lindner
citation:
ama: 'Brassat K, Pauly J, Kemper R, et al. Colloidal nano-lithography: state-of-the-art.
In: ; 2013.'
apa: 'Brassat, K., Pauly, J., Kemper, R., Strake, M., Brodehl, C., Sievers, W.,
… Lindner, J. (2013). Colloidal nano-lithography: state-of-the-art. Presented
at the 46th Biennial Meeting of the German Colloid Society “Morphological Transformations
and Responses in Colloidal Systems,” Paderborn.'
bibtex: '@inproceedings{Brassat_Pauly_Kemper_Strake_Brodehl_Sievers_Riedl_Lindner_2013,
title={Colloidal nano-lithography: state-of-the-art}, author={Brassat, Katharina
and Pauly, Johannes and Kemper, R. and Strake, M. and Brodehl, Christoph and Sievers,
Werner and Riedl, Thomas and Lindner, Jörg}, year={2013} }'
chicago: 'Brassat, Katharina, Johannes Pauly, R. Kemper, M. Strake, Christoph Brodehl,
Werner Sievers, Thomas Riedl, and Jörg Lindner. “Colloidal Nano-Lithography: State-of-the-Art,”
2013.'
ieee: 'K. Brassat et al., “Colloidal nano-lithography: state-of-the-art,”
presented at the 46th Biennial Meeting of the German Colloid Society “Morphological
Transformations and Responses in Colloidal Systems,” Paderborn, 2013.'
mla: 'Brassat, Katharina, et al. Colloidal Nano-Lithography: State-of-the-Art.
2013.'
short: 'K. Brassat, J. Pauly, R. Kemper, M. Strake, C. Brodehl, W. Sievers, T. Riedl,
J. Lindner, in: 2013.'
conference:
end_date: 2013-09-25
location: Paderborn
name: 46th Biennial Meeting of the German Colloid Society "Morphological Transformations
and Responses in Colloidal Systems"
start_date: 2013-09-23
date_created: 2018-08-23T12:43:31Z
date_updated: 2022-01-06T07:00:16Z
department:
- _id: '15'
- _id: '286'
language:
- iso: eng
status: public
title: 'Colloidal nano-lithography: state-of-the-art'
type: conference
user_id: '55706'
year: '2013'
...
---
_id: '4098'
abstract:
- lang: eng
text: The selective deposition and self-assembly of nanospheres from a colloidal
suspension in trenches on silicon surfaces is investigated using conventional
light, confocal laser scanning and scanning electron microscopy. Trenches with
widths of one to several nanosphere diameters are formed on silicon surfaces by
photolithography and reactive ion etching. The spreading knife convective self-assembly
technique is employed to distribute the nanosphere suspension on the pre-patterned
surface. It is shown that this technique is particularly useful in combination
with a functionalized surface where a selfassembled molecular monolayer changes
the contact angle such that sphere deposition takes place almost exclusively in
the trenches. By this, lines selectively filled with a chain of beads with a length
of 0.5 mm have been achieved.
article_type: original
author:
- first_name: Katharina
full_name: Brassat, Katharina
id: '11305'
last_name: Brassat
- first_name: Fabian
full_name: Assion, Fabian
last_name: Assion
- first_name: Ulrich
full_name: Hilleringmann, Ulrich
last_name: Hilleringmann
- first_name: Jörg
full_name: Lindner, Jörg
id: '20797'
last_name: Lindner
citation:
ama: Brassat K, Assion F, Hilleringmann U, Lindner J. Self-organization of nanospheres
in trenches on silicon surfaces. physica status solidi (a). 2013;210(8):1485-1489.
doi:10.1002/pssa.201200899
apa: Brassat, K., Assion, F., Hilleringmann, U., & Lindner, J. (2013). Self-organization
of nanospheres in trenches on silicon surfaces. Physica Status Solidi (A),
210(8), 1485–1489. https://doi.org/10.1002/pssa.201200899
bibtex: '@article{Brassat_Assion_Hilleringmann_Lindner_2013, title={Self-organization
of nanospheres in trenches on silicon surfaces}, volume={210}, DOI={10.1002/pssa.201200899},
number={8}, journal={physica status solidi (a)}, publisher={Wiley}, author={Brassat,
Katharina and Assion, Fabian and Hilleringmann, Ulrich and Lindner, Jörg}, year={2013},
pages={1485–1489} }'
chicago: 'Brassat, Katharina, Fabian Assion, Ulrich Hilleringmann, and Jörg Lindner.
“Self-Organization of Nanospheres in Trenches on Silicon Surfaces.” Physica
Status Solidi (A) 210, no. 8 (2013): 1485–89. https://doi.org/10.1002/pssa.201200899.'
ieee: K. Brassat, F. Assion, U. Hilleringmann, and J. Lindner, “Self-organization
of nanospheres in trenches on silicon surfaces,” physica status solidi (a),
vol. 210, no. 8, pp. 1485–1489, 2013.
mla: Brassat, Katharina, et al. “Self-Organization of Nanospheres in Trenches on
Silicon Surfaces.” Physica Status Solidi (A), vol. 210, no. 8, Wiley, 2013,
pp. 1485–89, doi:10.1002/pssa.201200899.
short: K. Brassat, F. Assion, U. Hilleringmann, J. Lindner, Physica Status Solidi
(A) 210 (2013) 1485–1489.
conference:
end_date: 2012-09-21
location: Warsaw (Poland)
name: European Materials Research Society Fall Meeting 2012
start_date: 2012-09-17
date_created: 2018-08-23T12:45:01Z
date_updated: 2022-01-06T07:00:16Z
ddc:
- '530'
department:
- _id: '15'
- _id: '286'
- _id: '230'
- _id: '59'
doi: 10.1002/pssa.201200899
file:
- access_level: closed
content_type: application/pdf
creator: hclaudia
date_created: 2018-08-23T12:47:33Z
date_updated: 2018-08-23T12:47:33Z
file_id: '4099'
file_name: Self-organization of nanospheres in trenches on silicon surfaces.pdf
file_size: 705809
relation: main_file
success: 1
file_date_updated: 2018-08-23T12:47:33Z
has_accepted_license: '1'
intvolume: ' 210'
issue: '8'
language:
- iso: eng
page: 1485-1489
publication: physica status solidi (a)
publication_identifier:
issn:
- 1862-6300
publication_status: published
publisher: Wiley
status: public
title: Self-organization of nanospheres in trenches on silicon surfaces
type: journal_article
user_id: '55706'
volume: 210
year: '2013'
...
---
_id: '4100'
author:
- first_name: Katharina
full_name: Brassat, Katharina
id: '11305'
last_name: Brassat
- first_name: Jörg
full_name: Lindner, Jörg
id: '20797'
last_name: Lindner
citation:
ama: 'Brassat K, Lindner J. Selective deposition of nanospheres in trenches on silicon
surfaces by self-organisation. In: ; 2013.'
apa: Brassat, K., & Lindner, J. (2013). Selective deposition of nanospheres
in trenches on silicon surfaces by self-organisation. Presented at the Frühjahrstagung
der Deutschen Physikalischen Gesellschaft, Regensburg.
bibtex: '@inproceedings{Brassat_Lindner_2013, title={Selective deposition of nanospheres
in trenches on silicon surfaces by self-organisation}, author={Brassat, Katharina
and Lindner, Jörg}, year={2013} }'
chicago: Brassat, Katharina, and Jörg Lindner. “Selective Deposition of Nanospheres
in Trenches on Silicon Surfaces by Self-Organisation,” 2013.
ieee: K. Brassat and J. Lindner, “Selective deposition of nanospheres in trenches
on silicon surfaces by self-organisation,” presented at the Frühjahrstagung der
Deutschen Physikalischen Gesellschaft, Regensburg, 2013.
mla: Brassat, Katharina, and Jörg Lindner. Selective Deposition of Nanospheres
in Trenches on Silicon Surfaces by Self-Organisation. 2013.
short: 'K. Brassat, J. Lindner, in: 2013.'
conference:
end_date: 2013-03-15
location: Regensburg
name: Frühjahrstagung der Deutschen Physikalischen Gesellschaft
start_date: 2013-03-10
date_created: 2018-08-23T12:50:03Z
date_updated: 2022-01-06T07:00:17Z
department:
- _id: '15'
- _id: '286'
language:
- iso: eng
status: public
title: Selective deposition of nanospheres in trenches on silicon surfaces by self-organisation
type: conference
user_id: '55706'
year: '2013'
...
---
_id: '4101'
author:
- first_name: Christoph
full_name: Brodehl, Christoph
id: '30380'
last_name: Brodehl
- first_name: Siegmund
full_name: Greulich-Weber, Siegmund
last_name: Greulich-Weber
- first_name: Jörg
full_name: Lindner, Jörg
id: '20797'
last_name: Lindner
citation:
ama: 'Brodehl C, Greulich-Weber S, Lindner J. Tailored structures produced via nanosphere
lithography. In: ; 2013.'
apa: Brodehl, C., Greulich-Weber, S., & Lindner, J. (2013). Tailored structures
produced via nanosphere lithography. Presented at the Graduate School 1464 on
Micro- and Nanostructures in Optoelectronics and Photonics, Paderborn.
bibtex: '@inproceedings{Brodehl_Greulich-Weber_Lindner_2013, title={Tailored structures
produced via nanosphere lithography}, author={Brodehl, Christoph and Greulich-Weber,
Siegmund and Lindner, Jörg}, year={2013} }'
chicago: Brodehl, Christoph, Siegmund Greulich-Weber, and Jörg Lindner. “Tailored
Structures Produced via Nanosphere Lithography,” 2013.
ieee: C. Brodehl, S. Greulich-Weber, and J. Lindner, “Tailored structures produced
via nanosphere lithography,” presented at the Graduate School 1464 on Micro- and
Nanostructures in Optoelectronics and Photonics, Paderborn, 2013.
mla: Brodehl, Christoph, et al. Tailored Structures Produced via Nanosphere Lithography.
2013.
short: 'C. Brodehl, S. Greulich-Weber, J. Lindner, in: 2013.'
conference:
end_date: 2013-11-26
location: Paderborn
name: Graduate School 1464 on Micro- and Nanostructures in Optoelectronics and Photonics
start_date: 2013-11-25
date_created: 2018-08-23T12:52:05Z
date_updated: 2022-01-06T07:00:17Z
department:
- _id: '15'
- _id: '286'
language:
- iso: eng
status: public
title: Tailored structures produced via nanosphere lithography
type: conference
user_id: '55706'
year: '2013'
...
---
_id: '4103'
author:
- first_name: M.
full_name: Dogan, M.
last_name: Dogan
- first_name: R.M.
full_name: Kemper, R.M.
last_name: Kemper
- first_name: Jörg
full_name: Lindner, Jörg
id: '20797'
last_name: Lindner
citation:
ama: 'Dogan M, Kemper RM, Lindner J. Dewetting and Redistribution of an Au Catalyst
on Nanopatterned 3C-SiC/Si (001) Surfaces. In: ; 2013.'
apa: Dogan, M., Kemper, R. M., & Lindner, J. (2013). Dewetting and Redistribution
of an Au Catalyst on Nanopatterned 3C-SiC/Si (001) Surfaces. Presented at the
MRS Fall Meeting 2013, Boston.
bibtex: '@inproceedings{Dogan_Kemper_Lindner_2013, title={Dewetting and Redistribution
of an Au Catalyst on Nanopatterned 3C-SiC/Si (001) Surfaces}, author={Dogan, M.
and Kemper, R.M. and Lindner, Jörg}, year={2013} }'
chicago: Dogan, M., R.M. Kemper, and Jörg Lindner. “Dewetting and Redistribution
of an Au Catalyst on Nanopatterned 3C-SiC/Si (001) Surfaces,” 2013.
ieee: M. Dogan, R. M. Kemper, and J. Lindner, “Dewetting and Redistribution of an
Au Catalyst on Nanopatterned 3C-SiC/Si (001) Surfaces,” presented at the MRS Fall
Meeting 2013, Boston, 2013.
mla: Dogan, M., et al. Dewetting and Redistribution of an Au Catalyst on Nanopatterned
3C-SiC/Si (001) Surfaces. 2013.
short: 'M. Dogan, R.M. Kemper, J. Lindner, in: 2013.'
conference:
end_date: 2013-12-06
location: Boston
name: MRS Fall Meeting 2013
start_date: 2013-12-01
date_created: 2018-08-23T12:57:43Z
date_updated: 2022-01-06T07:00:17Z
department:
- _id: '15'
- _id: '286'
language:
- iso: eng
status: public
title: Dewetting and Redistribution of an Au Catalyst on Nanopatterned 3C-SiC/Si (001)
Surfaces
type: conference
user_id: '55706'
year: '2013'
...
---
_id: '4106'
author:
- first_name: Jörg
full_name: Lindner, Jörg
id: '20797'
last_name: Lindner
- first_name: R.M.
full_name: Kemper, R.M.
last_name: Kemper
- first_name: Donald
full_name: As, Donald
last_name: As
- first_name: D.
full_name: Meeertens, D.
last_name: Meeertens
- first_name: A.
full_name: Kovács, A.
last_name: Kovács
- first_name: M.
full_name: Luysberg, M.
last_name: Luysberg
- first_name: K.
full_name: Tillmann, K.
last_name: Tillmann
citation:
ama: 'Lindner J, Kemper RM, As D, et al. Characterization of cubic GaN/AlN multi-quantum
wells using state-of-the-art analytical STEM. In: ; 2013:188-189.'
apa: Lindner, J., Kemper, R. M., As, D., Meeertens, D., Kovács, A., Luysberg, M.,
& Tillmann, K. (2013). Characterization of cubic GaN/AlN multi-quantum wells
using state-of-the-art analytical STEM (pp. 188–189). Presented at the Proceedings
of the Microscopy Conference MC2013, Regensburg.
bibtex: '@inproceedings{Lindner_Kemper_As_Meeertens_Kovács_Luysberg_Tillmann_2013,
title={Characterization of cubic GaN/AlN multi-quantum wells using state-of-the-art
analytical STEM}, author={Lindner, Jörg and Kemper, R.M. and As, Donald and Meeertens,
D. and Kovács, A. and Luysberg, M. and Tillmann, K.}, year={2013}, pages={188–189}
}'
chicago: Lindner, Jörg, R.M. Kemper, Donald As, D. Meeertens, A. Kovács, M. Luysberg,
and K. Tillmann. “Characterization of Cubic GaN/AlN Multi-Quantum Wells Using
State-of-the-Art Analytical STEM,” 188–89, 2013.
ieee: J. Lindner et al., “Characterization of cubic GaN/AlN multi-quantum
wells using state-of-the-art analytical STEM,” presented at the Proceedings of
the Microscopy Conference MC2013, Regensburg, 2013, pp. 188–189.
mla: Lindner, Jörg, et al. Characterization of Cubic GaN/AlN Multi-Quantum Wells
Using State-of-the-Art Analytical STEM. 2013, pp. 188–89.
short: 'J. Lindner, R.M. Kemper, D. As, D. Meeertens, A. Kovács, M. Luysberg, K.
Tillmann, in: 2013, pp. 188–189.'
conference:
end_date: 2013-08-30
location: Regensburg
name: Proceedings of the Microscopy Conference MC2013
start_date: 2013-08-25
date_created: 2018-08-23T13:06:02Z
date_updated: 2022-01-06T07:00:18Z
department:
- _id: '15'
- _id: '286'
page: 188-189
status: public
title: Characterization of cubic GaN/AlN multi-quantum wells using state-of-the-art
analytical STEM
type: conference
user_id: '55706'
year: '2013'
...
---
_id: '4107'
article_type: original
author:
- first_name: Jörg
full_name: Lindner, Jörg
id: '20797'
last_name: Lindner
citation:
ama: Lindner J. Nanosphere lithography for device fabrication. SPIE Newsroom.
2013. doi:10.1117/2.1201310.005154
apa: Lindner, J. (2013). Nanosphere lithography for device fabrication. SPIE
Newsroom. https://doi.org/10.1117/2.1201310.005154
bibtex: '@article{Lindner_2013, title={Nanosphere lithography for device fabrication},
DOI={10.1117/2.1201310.005154},
journal={SPIE Newsroom}, publisher={SPIE-Intl Soc Optical Eng}, author={Lindner,
Jörg}, year={2013} }'
chicago: Lindner, Jörg. “Nanosphere Lithography for Device Fabrication.” SPIE
Newsroom, 2013. https://doi.org/10.1117/2.1201310.005154.
ieee: J. Lindner, “Nanosphere lithography for device fabrication,” SPIE Newsroom,
2013.
mla: Lindner, Jörg. “Nanosphere Lithography for Device Fabrication.” SPIE Newsroom,
SPIE-Intl Soc Optical Eng, 2013, doi:10.1117/2.1201310.005154.
short: J. Lindner, SPIE Newsroom (2013).
date_created: 2018-08-23T13:07:06Z
date_updated: 2022-01-06T07:00:18Z
ddc:
- '530'
department:
- _id: '15'
- _id: '286'
doi: 10.1117/2.1201310.005154
file:
- access_level: closed
content_type: application/pdf
creator: hclaudia
date_created: 2018-08-23T13:09:31Z
date_updated: 2018-08-23T13:09:31Z
file_id: '4108'
file_name: Nanosphere lithography for device fabrication.pdf
file_size: 466277
relation: main_file
success: 1
file_date_updated: 2018-08-23T13:09:31Z
has_accepted_license: '1'
publication: SPIE Newsroom
publication_identifier:
issn:
- 1818-2259
publication_status: published
publisher: SPIE-Intl Soc Optical Eng
status: public
title: Nanosphere lithography for device fabrication
type: journal_article
user_id: '55706'
year: '2013'
...
---
_id: '4109'
author:
- first_name: Johannes
full_name: Pauly, Johannes
last_name: Pauly
- first_name: Jörg
full_name: Lindner, Jörg
id: '20797'
last_name: Lindner
citation:
ama: 'Pauly J, Lindner J. Nickel Nanodot Arrays on Silicon formed by Nanosphere
Lithography: A TEM Study. In: ; 2013.'
apa: 'Pauly, J., & Lindner, J. (2013). Nickel Nanodot Arrays on Silicon formed
by Nanosphere Lithography: A TEM Study. Presented at the Frühjahrstagung der Deutschen
Physikalischen Gesellschaft, Regensburg (Germany).'
bibtex: '@inproceedings{Pauly_Lindner_2013, title={Nickel Nanodot Arrays on Silicon
formed by Nanosphere Lithography: A TEM Study}, author={Pauly, Johannes and Lindner,
Jörg}, year={2013} }'
chicago: 'Pauly, Johannes, and Jörg Lindner. “Nickel Nanodot Arrays on Silicon Formed
by Nanosphere Lithography: A TEM Study,” 2013.'
ieee: 'J. Pauly and J. Lindner, “Nickel Nanodot Arrays on Silicon formed by Nanosphere
Lithography: A TEM Study,” presented at the Frühjahrstagung der Deutschen Physikalischen
Gesellschaft, Regensburg (Germany), 2013.'
mla: 'Pauly, Johannes, and Jörg Lindner. Nickel Nanodot Arrays on Silicon Formed
by Nanosphere Lithography: A TEM Study. 2013.'
short: 'J. Pauly, J. Lindner, in: 2013.'
conference:
end_date: 2013-03-15
location: Regensburg (Germany)
name: Frühjahrstagung der Deutschen Physikalischen Gesellschaft
start_date: 2013-03-10
date_created: 2018-08-23T13:11:21Z
date_updated: 2022-01-06T07:00:18Z
department:
- _id: '15'
- _id: '286'
language:
- iso: eng
status: public
title: 'Nickel Nanodot Arrays on Silicon formed by Nanosphere Lithography: A TEM Study'
type: conference
user_id: '55706'
year: '2013'
...
---
_id: '4110'
author:
- first_name: Thomas
full_name: Riedl, Thomas
id: '36950'
last_name: Riedl
- first_name: Jörg
full_name: Lindner, Jörg
id: '20797'
last_name: Lindner
citation:
ama: 'Riedl T, Lindner J. Self-organized Fabrication of Periodic Nanocolumn Arrays
on GaAs Surfaces. In: ; 2013.'
apa: Riedl, T., & Lindner, J. (2013). Self-organized Fabrication of Periodic
Nanocolumn Arrays on GaAs Surfaces. Presented at the MRS Fall Meeting 2013, Boston
(USA).
bibtex: '@inproceedings{Riedl_Lindner_2013, title={Self-organized Fabrication of
Periodic Nanocolumn Arrays on GaAs Surfaces}, author={Riedl, Thomas and Lindner,
Jörg}, year={2013} }'
chicago: Riedl, Thomas, and Jörg Lindner. “Self-Organized Fabrication of Periodic
Nanocolumn Arrays on GaAs Surfaces,” 2013.
ieee: T. Riedl and J. Lindner, “Self-organized Fabrication of Periodic Nanocolumn
Arrays on GaAs Surfaces,” presented at the MRS Fall Meeting 2013, Boston (USA),
2013.
mla: Riedl, Thomas, and Jörg Lindner. Self-Organized Fabrication of Periodic
Nanocolumn Arrays on GaAs Surfaces. 2013.
short: 'T. Riedl, J. Lindner, in: 2013.'
conference:
end_date: 2013-12-06
location: Boston (USA)
name: MRS Fall Meeting 2013
start_date: 2013-12-01
date_created: 2018-08-23T13:12:46Z
date_updated: 2022-01-06T07:00:18Z
department:
- _id: '15'
- _id: '286'
language:
- iso: eng
status: public
title: Self-organized Fabrication of Periodic Nanocolumn Arrays on GaAs Surfaces
type: conference
user_id: '55706'
year: '2013'
...
---
_id: '4111'
abstract:
- lang: eng
text: "In this article we study the elemental distribution and solute solubility
in nanocrystalline alloys of immiscible components near restricted equilibrium
for the case of the binary Cu–Ag system. As predicted from thermodynamic considerations,
a grain boundary segregated monophase alloy is observed in the annealed mechanically
alloyed state for low Ag content by using atom probe tomography. From the detected
Ag solute grain boundary enrichment the\r\nsegregation free enthalpy is estimated
to range between -25 and -49 kJ mol^-1 following the McLean equation, in agreement
with values reported for coarse-grained Cu–Ag. The extension of the alloying range
is described by a two-domain thermodynamic model that considers the excess free
volume in the grain boundaries and the strain in the strain interior on the basis
of the universal equation of state at negative pressure. To access the grain boundary
volumetric strain experimentally, a method based on a combination of density measurements
and microscopical quantification of closed pore areas is presented. Moreover,
we apply x-ray diffraction line broadening analysis to determine the local strain
amplitude, which yields a root-mean-square microstrain of \x180.3% for a grain
size of \x1830 nm. It is shown that the grain boundary free volume represents
the major origin for the global solubility enhancement in\r\nnanocrystalline Cu–Ag
at 503 K."
article_number: 115401 (9 pp.)
article_type: original
author:
- first_name: Thomas
full_name: Riedl, Thomas
id: '36950'
last_name: Riedl
- first_name: A
full_name: Kirchner, A
last_name: Kirchner
- first_name: K
full_name: Eymann, K
last_name: Eymann
- first_name: A
full_name: Shariq, A
last_name: Shariq
- first_name: R
full_name: Schlesiger, R
last_name: Schlesiger
- first_name: G
full_name: Schmitz, G
last_name: Schmitz
- first_name: M
full_name: Ruhnow, M
last_name: Ruhnow
- first_name: B
full_name: Kieback, B
last_name: Kieback
citation:
ama: 'Riedl T, Kirchner A, Eymann K, et al. Elemental distribution, solute solubility
and defect free volume in nanocrystalline restricted-equilibrium Cu–Ag alloys.
Journal of Physics: Condensed Matter. 2013;25(11). doi:10.1088/0953-8984/25/11/115401'
apa: 'Riedl, T., Kirchner, A., Eymann, K., Shariq, A., Schlesiger, R., Schmitz,
G., … Kieback, B. (2013). Elemental distribution, solute solubility and defect
free volume in nanocrystalline restricted-equilibrium Cu–Ag alloys. Journal
of Physics: Condensed Matter, 25(11). https://doi.org/10.1088/0953-8984/25/11/115401'
bibtex: '@article{Riedl_Kirchner_Eymann_Shariq_Schlesiger_Schmitz_Ruhnow_Kieback_2013,
title={Elemental distribution, solute solubility and defect free volume in nanocrystalline
restricted-equilibrium Cu–Ag alloys}, volume={25}, DOI={10.1088/0953-8984/25/11/115401},
number={11115401 (9 pp.)}, journal={Journal of Physics: Condensed Matter}, publisher={IOP
Publishing}, author={Riedl, Thomas and Kirchner, A and Eymann, K and Shariq, A
and Schlesiger, R and Schmitz, G and Ruhnow, M and Kieback, B}, year={2013} }'
chicago: 'Riedl, Thomas, A Kirchner, K Eymann, A Shariq, R Schlesiger, G Schmitz,
M Ruhnow, and B Kieback. “Elemental Distribution, Solute Solubility and Defect
Free Volume in Nanocrystalline Restricted-Equilibrium Cu–Ag Alloys.” Journal
of Physics: Condensed Matter 25, no. 11 (2013). https://doi.org/10.1088/0953-8984/25/11/115401.'
ieee: 'T. Riedl et al., “Elemental distribution, solute solubility and defect
free volume in nanocrystalline restricted-equilibrium Cu–Ag alloys,” Journal
of Physics: Condensed Matter, vol. 25, no. 11, 2013.'
mla: 'Riedl, Thomas, et al. “Elemental Distribution, Solute Solubility and Defect
Free Volume in Nanocrystalline Restricted-Equilibrium Cu–Ag Alloys.” Journal
of Physics: Condensed Matter, vol. 25, no. 11, 115401 (9 pp.), IOP Publishing,
2013, doi:10.1088/0953-8984/25/11/115401.'
short: 'T. Riedl, A. Kirchner, K. Eymann, A. Shariq, R. Schlesiger, G. Schmitz,
M. Ruhnow, B. Kieback, Journal of Physics: Condensed Matter 25 (2013).'
date_created: 2018-08-23T13:18:34Z
date_updated: 2022-01-06T07:00:18Z
ddc:
- '530'
department:
- _id: '15'
- _id: '286'
doi: 10.1088/0953-8984/25/11/115401
file:
- access_level: closed
content_type: application/pdf
creator: hclaudia
date_created: 2018-08-23T13:21:21Z
date_updated: 2018-08-23T13:21:21Z
file_id: '4112'
file_name: Elemental distribution, solute solubility and defect free volume in nanocrystalline
restricted-equilibrium Cu-Ag alloys.pdf
file_size: 1116530
relation: main_file
success: 1
file_date_updated: 2018-08-23T13:21:21Z
has_accepted_license: '1'
intvolume: ' 25'
issue: '11'
language:
- iso: eng
publication: 'Journal of Physics: Condensed Matter'
publication_identifier:
issn:
- 0953-8984
- 1361-648X
publication_status: published
publisher: IOP Publishing
status: public
title: Elemental distribution, solute solubility and defect free volume in nanocrystalline
restricted-equilibrium Cu–Ag alloys
type: journal_article
user_id: '55706'
volume: 25
year: '2013'
...
---
_id: '4113'
author:
- first_name: Jörg
full_name: Lindner, Jörg
last_name: Lindner
citation:
ama: 'Lindner J. Ion Interactions with Nanopatterned Surfaces. In: ; 2013.'
apa: Lindner, J. (2013). Ion Interactions with Nanopatterned Surfaces. Presented
at the 18th International Conference on Surface Modification of Materials by Ion
Beams, Kusadasi (Turkey).
bibtex: '@inproceedings{Lindner_2013, title={Ion Interactions with Nanopatterned
Surfaces}, author={Lindner, Jörg}, year={2013} }'
chicago: Lindner, Jörg. “Ion Interactions with Nanopatterned Surfaces,” 2013.
ieee: J. Lindner, “Ion Interactions with Nanopatterned Surfaces,” presented at the
18th International Conference on Surface Modification of Materials by Ion Beams,
Kusadasi (Turkey), 2013.
mla: Lindner, Jörg. Ion Interactions with Nanopatterned Surfaces. 2013.
short: 'J. Lindner, in: 2013.'
conference:
end_date: 2013-09-20
location: Kusadasi (Turkey)
name: 18th International Conference on Surface Modification of Materials by Ion
Beams
start_date: 2013-09-15
date_created: 2018-08-23T13:25:02Z
date_updated: 2022-01-06T07:00:18Z
department:
- _id: '15'
- _id: '286'
language:
- iso: eng
status: public
title: Ion Interactions with Nanopatterned Surfaces
type: conference
user_id: '55706'
year: '2013'
...
---
_id: '500'
author:
- first_name: Margarita
full_name: Staschewski, Margarita
last_name: Staschewski
citation:
ama: Staschewski M. Price Formation in the Restaurant Industry - An Empirical
Analysis. Universität Paderborn; 2013.
apa: Staschewski, M. (2013). Price Formation in the Restaurant Industry - An
Empirical Analysis. Universität Paderborn.
bibtex: '@book{Staschewski_2013, title={Price Formation in the Restaurant Industry
- An Empirical Analysis}, publisher={Universität Paderborn}, author={Staschewski,
Margarita}, year={2013} }'
chicago: Staschewski, Margarita. Price Formation in the Restaurant Industry -
An Empirical Analysis. Universität Paderborn, 2013.
ieee: M. Staschewski, Price Formation in the Restaurant Industry - An Empirical
Analysis. Universität Paderborn, 2013.
mla: Staschewski, Margarita. Price Formation in the Restaurant Industry - An
Empirical Analysis. Universität Paderborn, 2013.
short: M. Staschewski, Price Formation in the Restaurant Industry - An Empirical
Analysis, Universität Paderborn, 2013.
date_created: 2017-10-17T12:42:30Z
date_updated: 2022-01-06T07:01:34Z
project:
- _id: '1'
name: SFB 901
- _id: '7'
name: SFB 901 - Subprojekt A3
- _id: '2'
name: SFB 901 - Project Area A
publisher: Universität Paderborn
status: public
title: Price Formation in the Restaurant Industry - An Empirical Analysis
type: bachelorsthesis
user_id: '15504'
year: '2013'
...
---
_id: '501'
abstract:
- lang: eng
text: 'Handling run-time dynamics on embedded system-on-chip architectures has become
more challenging over the years. On the one hand, the impact of workload and physical
dynamics on the system behavior has dramatically increased. On the other hand,
embedded architectures have become more complex as they have evolved from single-processor
systems over multi-processor systems to hybrid multi-core platforms.Static design-time
techniques no longer provide suitable solutions to deal with the run-time dynamics
of today''s embedded systems. Therefore, system designers have to apply run-time
solutions, which have hardly been investigated for hybrid multi-core platforms.In
this thesis, we present fundamental work in the new area of run-time management
on hybrid multi-core platforms. We propose a novel architecture, a self-adaptive
hybrid multi-core system, that combines heterogeneous processors, reconfigurable
hardware cores, and monitoring cores on a single chip. Using self-adaptation on
thread-level, our hybrid multi-core systems can effectively perform performance
and thermal management autonomously at run-time. '
author:
- first_name: Markus
full_name: Happe, Markus
last_name: Happe
citation:
ama: 'Happe M. Performance and Thermal Management on Self-Adaptive Hybrid Multi-Cores.
Berlin: Logos Verlag Berlin GmbH; 2013.'
apa: 'Happe, M. (2013). Performance and thermal management on self-adaptive hybrid
multi-cores. Berlin: Logos Verlag Berlin GmbH.'
bibtex: '@book{Happe_2013, place={Berlin}, title={Performance and thermal management
on self-adaptive hybrid multi-cores}, publisher={Logos Verlag Berlin GmbH}, author={Happe,
Markus}, year={2013} }'
chicago: 'Happe, Markus. Performance and Thermal Management on Self-Adaptive
Hybrid Multi-Cores. Berlin: Logos Verlag Berlin GmbH, 2013.'
ieee: 'M. Happe, Performance and thermal management on self-adaptive hybrid multi-cores.
Berlin: Logos Verlag Berlin GmbH, 2013.'
mla: Happe, Markus. Performance and Thermal Management on Self-Adaptive Hybrid
Multi-Cores. Logos Verlag Berlin GmbH, 2013.
short: M. Happe, Performance and Thermal Management on Self-Adaptive Hybrid Multi-Cores,
Logos Verlag Berlin GmbH, Berlin, 2013.
date_created: 2017-10-17T12:42:30Z
date_updated: 2022-01-06T07:01:34Z
department:
- _id: '78'
language:
- iso: eng
page: '220'
place: Berlin
project:
- _id: '14'
name: SFB 901 - Subprojekt C2
- _id: '1'
name: SFB 901
- _id: '4'
name: SFB 901 - Project Area C
publication_identifier:
isbn:
- 978-3-8325-3425-7
publication_status: published
publisher: Logos Verlag Berlin GmbH
related_material:
link:
- relation: confirmation
url: https://www.logos-verlag.de/cgi-bin/engbuchmid?isbn=3425&lng=deu&id=
status: public
supervisor:
- first_name: Marco
full_name: Platzner, Marco
id: '398'
last_name: Platzner
title: Performance and thermal management on self-adaptive hybrid multi-cores
type: dissertation
user_id: '477'
year: '2013'
...
---
_id: '502'
abstract:
- lang: eng
text: Self-adaptation allows continuously running software systems to operate in
changing and uncertain contexts while meeting their requirements in a broad range
of contexts, e.g., from low to high load situations. As a consequence, requirementsfor
self-adaptive systems are more complex than requirements for static systems as
they have to explicitly address properties of the self-adaptation layer.While
approaches exist in the literature to capture this new type of requirements formally,
their achievement cannot be analyzed in early design phases yet. In this paper,
we apply RELAX to formally specify non-functional requirements for self-adaptive
systems. We then apply our model-based SimuLizar approach for a semi-automatic
analysis to test whether the self-adaptation layer ensures that these non-functional
requirements are met. We evaluate our approach on the design of a proof-of-concept
load balancer system. As this evaluation demonstrates, we can iteratively improve
our system design by improving unsatisfactory self-adaption rules.
author:
- first_name: Matthias
full_name: Becker, Matthias
last_name: Becker
- first_name: Markus
full_name: Luckey, Markus
last_name: Luckey
- first_name: Steffen
full_name: Becker, Steffen
last_name: Becker
citation:
ama: 'Becker M, Luckey M, Becker S. Performance Analysis of Self-Adaptive Systems
for Requirements Validation at Design-Time. In: Proceedings of the 9th ACM
SigSoft International Conference on Quality of Software Architectures (QoSA’13).
; 2013:43-52. doi:10.1145/2465478.2465489'
apa: Becker, M., Luckey, M., & Becker, S. (2013). Performance Analysis of Self-Adaptive
Systems for Requirements Validation at Design-Time. In Proceedings of the 9th
ACM SigSoft International Conference on Quality of Software Architectures (QoSA’13)
(pp. 43–52). https://doi.org/10.1145/2465478.2465489
bibtex: '@inproceedings{Becker_Luckey_Becker_2013, title={Performance Analysis of
Self-Adaptive Systems for Requirements Validation at Design-Time}, DOI={10.1145/2465478.2465489},
booktitle={Proceedings of the 9th ACM SigSoft International Conference on Quality
of Software Architectures (QoSA’13)}, author={Becker, Matthias and Luckey, Markus
and Becker, Steffen}, year={2013}, pages={43–52} }'
chicago: Becker, Matthias, Markus Luckey, and Steffen Becker. “Performance Analysis
of Self-Adaptive Systems for Requirements Validation at Design-Time.” In Proceedings
of the 9th ACM SigSoft International Conference on Quality of Software Architectures
(QoSA’13), 43–52, 2013. https://doi.org/10.1145/2465478.2465489.
ieee: M. Becker, M. Luckey, and S. Becker, “Performance Analysis of Self-Adaptive
Systems for Requirements Validation at Design-Time,” in Proceedings of the
9th ACM SigSoft International Conference on Quality of Software Architectures
(QoSA’13), 2013, pp. 43–52.
mla: Becker, Matthias, et al. “Performance Analysis of Self-Adaptive Systems for
Requirements Validation at Design-Time.” Proceedings of the 9th ACM SigSoft
International Conference on Quality of Software Architectures (QoSA’13), 2013,
pp. 43–52, doi:10.1145/2465478.2465489.
short: 'M. Becker, M. Luckey, S. Becker, in: Proceedings of the 9th ACM SigSoft
International Conference on Quality of Software Architectures (QoSA’13), 2013,
pp. 43–52.'
date_created: 2017-10-17T12:42:30Z
date_updated: 2022-01-06T07:01:35Z
ddc:
- '040'
doi: 10.1145/2465478.2465489
file:
- access_level: closed
content_type: application/pdf
creator: florida
date_created: 2018-03-15T13:39:29Z
date_updated: 2018-03-15T13:39:29Z
file_id: '1309'
file_name: 502-qosa33f.pdf
file_size: 320384
relation: main_file
success: 1
file_date_updated: 2018-03-15T13:39:29Z
has_accepted_license: '1'
page: '43-52 '
project:
- _id: '1'
name: SFB 901
- _id: '11'
name: SFB 901 - Subprojekt B3
- _id: '3'
name: SFB 901 - Project Area B
publication: Proceedings of the 9th ACM SigSoft International Conference on Quality
of Software Architectures (QoSA'13)
status: public
title: Performance Analysis of Self-Adaptive Systems for Requirements Validation at
Design-Time
type: conference
user_id: '15504'
year: '2013'
...