[{"department":[{"_id":"150"},{"_id":"624"},{"_id":"219"}],"type":"conference","date_created":"2021-05-14T07:46:09Z","abstract":[{"text":"The temperature distribution and history within laser sintered part cakes is an important aspect regarding the process quality and reproducibility of the polymer laser sintering process. Especially the temperature history during the build and cooling phase is decisive for powder ageing effects and the development of part quality characteristics. In this work, a measurement system for three-dimensional in-process temperature measurements is set up and the influence of different parameters on the inner part cake temperature distribution and history is analyzed. Important factors are not only geometrical build job parameters like the part packing density and build height, but also process parameters like the layer thickness and bulk powder density. Individual in-process temperature profiles at different positions within a part cake are finally correlated with powder ageing effects. The results of this work help to understand the temperature history dependency of powder and part properties and can therefore be used to develop optimized process controls.","lang":"eng"}],"citation":{"chicago":"Josupeit, Stefan, and Hans-Joachim Schmid. “Temperature History within Laser Sintered Part Cakes and Its Influence on Process Quality.” In <i>26th Annual International Solid Freeform Fabrication Symposium</i>, 26:190–99, 2015. <a href=\"http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-15-Josupeit.pdf\">http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-15-Josupeit.pdf</a>.","short":"S. Josupeit, H.-J. Schmid, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 190–199.","ama":"Josupeit S, Schmid H-J. Temperature History within Laser Sintered Part Cakes and its Influence on Process Quality. In: <i>26th Annual International Solid Freeform Fabrication Symposium</i>. Vol 26. ; 2015:190-199. doi:<a href=\"http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-15-Josupeit.pdf\">http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-15-Josupeit.pdf</a>","bibtex":"@inproceedings{Josupeit_Schmid_2015, title={Temperature History within Laser Sintered Part Cakes and its Influence on Process Quality}, volume={26}, DOI={<a href=\"http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-15-Josupeit.pdf\">http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-15-Josupeit.pdf</a>}, booktitle={26th Annual International Solid Freeform Fabrication Symposium}, author={Josupeit, Stefan and Schmid, Hans-Joachim}, year={2015}, pages={190–199} }","apa":"Josupeit, S., &#38; Schmid, H.-J. (2015). Temperature History within Laser Sintered Part Cakes and its Influence on Process Quality. In <i>26th Annual International Solid Freeform Fabrication Symposium</i> (Vol. 26, pp. 190–199). <a href=\"http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-15-Josupeit.pdf\">http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-15-Josupeit.pdf</a>","mla":"Josupeit, Stefan, and Hans-Joachim Schmid. “Temperature History within Laser Sintered Part Cakes and Its Influence on Process Quality.” <i>26th Annual International Solid Freeform Fabrication Symposium</i>, vol. 26, 2015, pp. 190–99, doi:<a href=\"http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-15-Josupeit.pdf\">http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-15-Josupeit.pdf</a>.","ieee":"S. Josupeit and H.-J. Schmid, “Temperature History within Laser Sintered Part Cakes and its Influence on Process Quality,” in <i>26th Annual International Solid Freeform Fabrication Symposium</i>, 2015, vol. 26, pp. 190–199."},"publication":"26th Annual International Solid Freeform Fabrication Symposium","volume":26,"doi":"http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-15-Josupeit.pdf","user_id":"71545","_id":"22179","language":[{"iso":"eng"}],"page":"190-199","intvolume":"        26","date_updated":"2022-01-06T06:55:28Z","author":[{"last_name":"Josupeit","first_name":"Stefan","full_name":"Josupeit, Stefan"},{"id":"464","full_name":"Schmid, Hans-Joachim","last_name":"Schmid","first_name":"Hans-Joachim"}],"year":"2015","status":"public","title":"Temperature History within Laser Sintered Part Cakes and its Influence on Process Quality"},{"date_created":"2021-05-14T07:46:18Z","department":[{"_id":"150"},{"_id":"624"},{"_id":"219"}],"type":"conference","citation":{"apa":"Josupeit, S., Lohn, J., Hermann, E., Gessler, M., Tenbrink, S., &#38; Schmid, H.-J. (2015). Material Properties of Laser Sintered Polyamide 12 as Function of Build Cycles Using Low Refresh Rates. In <i>26th Annual International Solid Freeform Fabrication Symposium</i> (Vol. 26, pp. 540–549). <a href=\"http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-43-Josupeit.pdf\">http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-43-Josupeit.pdf</a>","ieee":"S. Josupeit, J. Lohn, E. Hermann, M. Gessler, S. Tenbrink, and H.-J. Schmid, “Material Properties of Laser Sintered Polyamide 12 as Function of Build Cycles Using Low Refresh Rates,” in <i>26th Annual International Solid Freeform Fabrication Symposium</i>, 2015, vol. 26, pp. 540–549.","chicago":"Josupeit, Stefan, Johannes Lohn, E. Hermann, Monika Gessler, S. Tenbrink, and Hans-Joachim Schmid. “Material Properties of Laser Sintered Polyamide 12 as Function of Build Cycles Using Low Refresh Rates.” In <i>26th Annual International Solid Freeform Fabrication Symposium</i>, 26:540–49, 2015. <a href=\"http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-43-Josupeit.pdf\">http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-43-Josupeit.pdf</a>.","short":"S. Josupeit, J. Lohn, E. Hermann, M. Gessler, S. Tenbrink, H.-J. Schmid, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 540–549.","mla":"Josupeit, Stefan, et al. “Material Properties of Laser Sintered Polyamide 12 as Function of Build Cycles Using Low Refresh Rates.” <i>26th Annual International Solid Freeform Fabrication Symposium</i>, vol. 26, 2015, pp. 540–49, doi:<a href=\"http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-43-Josupeit.pdf\">http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-43-Josupeit.pdf</a>.","ama":"Josupeit S, Lohn J, Hermann E, Gessler M, Tenbrink S, Schmid H-J. Material Properties of Laser Sintered Polyamide 12 as Function of Build Cycles Using Low Refresh Rates. In: <i>26th Annual International Solid Freeform Fabrication Symposium</i>. Vol 26. ; 2015:540-549. doi:<a href=\"http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-43-Josupeit.pdf\">http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-43-Josupeit.pdf</a>","bibtex":"@inproceedings{Josupeit_Lohn_Hermann_Gessler_Tenbrink_Schmid_2015, title={Material Properties of Laser Sintered Polyamide 12 as Function of Build Cycles Using Low Refresh Rates}, volume={26}, DOI={<a href=\"http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-43-Josupeit.pdf\">http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-43-Josupeit.pdf</a>}, booktitle={26th Annual International Solid Freeform Fabrication Symposium}, author={Josupeit, Stefan and Lohn, Johannes and Hermann, E. and Gessler, Monika and Tenbrink, S. and Schmid, Hans-Joachim}, year={2015}, pages={540–549} }"},"publication":"26th Annual International Solid Freeform Fabrication Symposium","abstract":[{"lang":"eng","text":"Due to long process times at high temperatures, unmolten polyamide 12 material ages during the manufacturing process. Hence, it needs to be refreshed with new material for further build cycles. In application, refresh rates of about 50 % are commonly used. In this work, the recycling optimized material PA 2221 from EOS is analyzed along a series of 13 build and refresh cycles using a reduced refresh rate of 32 %. Before and after every build, the powder is analyzed regarding melt properties determined by MVR and DSC measurements. Thereby, in-process ageing effects are investigated and the steady-state conditions are determined accordingly. In addition, powder properties are directly linked to resulting mechanical and geometrical part properties. Key findings are a robust DSC measurement method for polyamide 12 powder, constant “circulated” material properties after three build/refresh cycles and robust tensile properties along the whole tested powder life cycle. As a result, process conditions of PA 2221 using reduced refresh rates can be derived from this work."}],"_id":"22187","language":[{"iso":"eng"}],"page":"540-549","volume":26,"doi":"http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-43-Josupeit.pdf","user_id":"71545","author":[{"full_name":"Josupeit, Stefan","first_name":"Stefan","last_name":"Josupeit"},{"last_name":"Lohn","first_name":"Johannes","full_name":"Lohn, Johannes"},{"full_name":"Hermann, E.","first_name":"E.","last_name":"Hermann"},{"first_name":"Monika","last_name":"Gessler","full_name":"Gessler, Monika"},{"full_name":"Tenbrink, S.","first_name":"S.","last_name":"Tenbrink"},{"id":"464","last_name":"Schmid","first_name":"Hans-Joachim","full_name":"Schmid, Hans-Joachim"}],"title":"Material Properties of Laser Sintered Polyamide 12 as Function of Build Cycles Using Low Refresh Rates","status":"public","year":"2015","intvolume":"        26","date_updated":"2022-01-06T06:55:28Z"},{"author":[{"first_name":"Patrick","last_name":"Delfs","full_name":"Delfs, Patrick"},{"full_name":"Toews, Marcel","last_name":"Toews","first_name":"Marcel"},{"full_name":"Schmid, Hans-Joachim","first_name":"Hans-Joachim","last_name":"Schmid","id":"464"}],"title":"Surface roughness optimized alignment of parts for additive manufacturing processes","year":"2015","status":"public","intvolume":"        26","date_updated":"2022-01-06T06:55:28Z","language":[{"iso":"eng"}],"_id":"22189","page":"1334-1344","volume":26,"doi":"http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-107-Delfs.pdf","user_id":"71545","citation":{"mla":"Delfs, Patrick, et al. “Surface Roughness Optimized Alignment of Parts for Additive Manufacturing Processes.” <i>26th Annual International Solid Freeform Fabrication Symposium</i>, vol. 26, 2015, pp. 1334–44, doi:<a href=\"http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-107-Delfs.pdf\">http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-107-Delfs.pdf</a>.","bibtex":"@inproceedings{Delfs_Toews_Schmid_2015, title={Surface roughness optimized alignment of parts for additive manufacturing processes}, volume={26}, DOI={<a href=\"http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-107-Delfs.pdf\">http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-107-Delfs.pdf</a>}, booktitle={26th Annual International Solid Freeform Fabrication Symposium}, author={Delfs, Patrick and Toews, Marcel and Schmid, Hans-Joachim}, year={2015}, pages={1334–1344} }","ama":"Delfs P, Toews M, Schmid H-J. Surface roughness optimized alignment of parts for additive manufacturing processes. In: <i>26th Annual International Solid Freeform Fabrication Symposium</i>. Vol 26. ; 2015:1334-1344. doi:<a href=\"http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-107-Delfs.pdf\">http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-107-Delfs.pdf</a>","ieee":"P. Delfs, M. Toews, and H.-J. Schmid, “Surface roughness optimized alignment of parts for additive manufacturing processes,” in <i>26th Annual International Solid Freeform Fabrication Symposium</i>, 2015, vol. 26, pp. 1334–1344.","apa":"Delfs, P., Toews, M., &#38; Schmid, H.-J. (2015). Surface roughness optimized alignment of parts for additive manufacturing processes. In <i>26th Annual International Solid Freeform Fabrication Symposium</i> (Vol. 26, pp. 1334–1344). <a href=\"http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-107-Delfs.pdf\">http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-107-Delfs.pdf</a>","short":"P. Delfs, M. Toews, H.-J. Schmid, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 1334–1344.","chicago":"Delfs, Patrick, Marcel Toews, and Hans-Joachim Schmid. “Surface Roughness Optimized Alignment of Parts for Additive Manufacturing Processes.” In <i>26th Annual International Solid Freeform Fabrication Symposium</i>, 26:1334–44, 2015. <a href=\"http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-107-Delfs.pdf\">http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-107-Delfs.pdf</a>."},"publication":"26th Annual International Solid Freeform Fabrication Symposium","abstract":[{"text":"The layered structure of Additive Manufacturing processes results in a stairstepping effect of the surface topographies. In general the impact of this effect strongly depends on the build angle of a surface, whereas the overall surface roughness is caused by the resolution of the specific AM process. The aim of this work is the prediction of the surface quality in dependence of the building orientation of a part. These results can finally be used to optimize the orientation to get a desired surface quality. As not every area of a part can be optimized, a predetermination of areas can be used to improve the surface quality of important areas. The model uses the digital STL format of a part as this is necessary for all AM machines to build it. Each triangle is assigned with a roughness value and by testing different orientations the best one can be found. This approach needs a database for the surface qualities. This must be done separately for each Additive Manufacturing process and is shown exemplary with a surface topography simulation for the laser sintering process.","lang":"eng"}],"date_created":"2021-05-14T07:46:20Z","department":[{"_id":"150"},{"_id":"624"},{"_id":"219"}],"type":"conference"},{"publication":"Proceedings of the Rapid Tech 2015","citation":{"short":"S. Josupeit, S. Tutzschky, M. Gessler, H.-J. Schmid, in: Proceedings of the Rapid Tech 2015, Springer Vieweg, 2015, pp. 63–78.","chicago":"Josupeit, Stefan, S. Tutzschky, M. Gessler, and Hans-Joachim Schmid. “Powder Ageing and Material Properties of Laser Sintered Polyamide 12 Using Low Refresh Rates.” In <i>Proceedings of the Rapid Tech 2015</i>, 63–78. Springer Vieweg, 2015. <a href=\"https://doi.org/10.1007/978-3-662-48473-9_5\">https://doi.org/10.1007/978-3-662-48473-9_5</a>.","ieee":"S. Josupeit, S. Tutzschky, M. Gessler, and H.-J. Schmid, “Powder ageing and material properties of laser sintered polyamide 12 using low refresh rates,” in <i>Proceedings of the Rapid Tech 2015</i>, 2015, pp. 63–78.","apa":"Josupeit, S., Tutzschky, S., Gessler, M., &#38; Schmid, H.-J. (2015). Powder ageing and material properties of laser sintered polyamide 12 using low refresh rates. In <i>Proceedings of the Rapid Tech 2015</i> (pp. 63–78). Springer Vieweg. <a href=\"https://doi.org/10.1007/978-3-662-48473-9_5\">https://doi.org/10.1007/978-3-662-48473-9_5</a>","bibtex":"@inproceedings{Josupeit_Tutzschky_Gessler_Schmid_2015, title={Powder ageing and material properties of laser sintered polyamide 12 using low refresh rates}, DOI={<a href=\"https://doi.org/10.1007/978-3-662-48473-9_5\">10.1007/978-3-662-48473-9_5</a>}, booktitle={Proceedings of the Rapid Tech 2015}, publisher={Springer Vieweg}, author={Josupeit, Stefan and Tutzschky, S. and Gessler, M. and Schmid, Hans-Joachim}, year={2015}, pages={63–78} }","ama":"Josupeit S, Tutzschky S, Gessler M, Schmid H-J. Powder ageing and material properties of laser sintered polyamide 12 using low refresh rates. In: <i>Proceedings of the Rapid Tech 2015</i>. Springer Vieweg; 2015:63-78. doi:<a href=\"https://doi.org/10.1007/978-3-662-48473-9_5\">10.1007/978-3-662-48473-9_5</a>","mla":"Josupeit, Stefan, et al. “Powder Ageing and Material Properties of Laser Sintered Polyamide 12 Using Low Refresh Rates.” <i>Proceedings of the Rapid Tech 2015</i>, Springer Vieweg, 2015, pp. 63–78, doi:<a href=\"https://doi.org/10.1007/978-3-662-48473-9_5\">10.1007/978-3-662-48473-9_5</a>."},"abstract":[{"lang":"eng","text":"Powder ageing effects due to thermal load usually lead to a limited recyclability of unmolten polyamide 12 powders in the laser sintering process. In this work, the recycling optimized material PA 2221 is analyzed regarding its ageing behavior along a series of more than ten build/refresh cycles using a refresh ratio of about 30%. Thereby, the melt viscosity is measured before and after every cycle and the “steady-state” condition is determined accordingly. In addition, the material properties of parts manufactured with PA 2221 are discussed dependent on different process parameters and compared to parts made of standard PA 2200 material with a refresh rate of about 50%. These parameters include the mechanical properties as well as for example the impact strength and geometrical properties as function of layer thickness and testing temperature. As a result, the optimal process conditions and achievable material properties for PA 2221 can be derived from this work."}],"date_created":"2021-05-14T07:46:32Z","type":"conference","department":[{"_id":"150"},{"_id":"624"},{"_id":"219"}],"title":"Powder ageing and material properties of laser sintered polyamide 12 using low refresh rates","year":"2015","status":"public","publication_identifier":{"isbn":["978-3-662-48473-9"]},"author":[{"first_name":"Stefan","last_name":"Josupeit","full_name":"Josupeit, Stefan"},{"first_name":"S.","last_name":"Tutzschky","full_name":"Tutzschky, S."},{"full_name":"Gessler, M.","first_name":"M.","last_name":"Gessler"},{"full_name":"Schmid, Hans-Joachim","last_name":"Schmid","first_name":"Hans-Joachim","id":"464"}],"date_updated":"2022-01-06T06:55:28Z","page":"63-78","_id":"22199","publisher":"Springer Vieweg","language":[{"iso":"eng"}],"doi":"10.1007/978-3-662-48473-9_5","user_id":"71545"},{"status":"public","user_id":"38077","volume":21,"page":"662-670","publisher":"Emerald Group Publishing Limited","_id":"22394","citation":{"ieee":"G. dell’Aere and D. Zimmer, “On design for Additive Manufacturing - evaluating geometrical limitations,” <i>Rapid Prototyping Journal</i>, vol. 21, no. 6, pp. 662–670, 2015.","mla":"dell’Aere, Guido, and Detmar Zimmer. “On Design for Additive Manufacturing - Evaluating Geometrical Limitations.” <i>Rapid Prototyping Journal</i>, vol. 21, no. 6, Emerald Group Publishing Limited, 2015, pp. 662–70, doi:<a href=\"https://doi.org/10.1108/RPJ-06-2013-0060\">10.1108/RPJ-06-2013-0060</a>.","apa":"dell’Aere, G., &#38; Zimmer, D. (2015). On design for Additive Manufacturing - evaluating geometrical limitations. <i>Rapid Prototyping Journal</i>, <i>21</i>(6), 662–670. <a href=\"https://doi.org/10.1108/RPJ-06-2013-0060\">https://doi.org/10.1108/RPJ-06-2013-0060</a>","bibtex":"@article{dell’Aere_Zimmer_2015, title={On design for Additive Manufacturing - evaluating geometrical limitations}, volume={21}, DOI={<a href=\"https://doi.org/10.1108/RPJ-06-2013-0060\">10.1108/RPJ-06-2013-0060</a>}, number={6}, journal={Rapid Prototyping Journal}, publisher={Emerald Group Publishing Limited}, author={dell’Aere, Guido and Zimmer, Detmar}, year={2015}, pages={662–670} }","chicago":"Aere, Guido dell’, and Detmar Zimmer. “On Design for Additive Manufacturing - Evaluating Geometrical Limitations.” <i>Rapid Prototyping Journal</i> 21, no. 6 (2015): 662–70. <a href=\"https://doi.org/10.1108/RPJ-06-2013-0060\">https://doi.org/10.1108/RPJ-06-2013-0060</a>.","ama":"dell’Aere G, Zimmer D. On design for Additive Manufacturing - evaluating geometrical limitations. <i>Rapid Prototyping Journal</i>. 2015;21(6):662-670. doi:<a href=\"https://doi.org/10.1108/RPJ-06-2013-0060\">10.1108/RPJ-06-2013-0060</a>","short":"G. dell’Aere, D. Zimmer, Rapid Prototyping Journal 21 (2015) 662–670."},"date_updated":"2022-01-06T06:55:32Z","intvolume":"        21","year":"2015","title":"On design for Additive Manufacturing - evaluating geometrical limitations","author":[{"full_name":"dell'Aere, Guido","last_name":"dell'Aere","first_name":"Guido"},{"id":"604","last_name":"Zimmer","first_name":"Detmar","full_name":"Zimmer, Detmar"}],"publication_identifier":{"isbn":["1355-2546"]},"doi":"10.1108/RPJ-06-2013-0060","language":[{"iso":"eng"}],"abstract":[{"lang":"eng","text":"Purpose – The purpose of this paper is to present Design Rules for additive manufacturing and a method for their development. Design/methodology/approach – First, a process-independent method for the development of Design Rules was worked out. Therefore, geometrical standard elements and attributes that characterize the elements’ shapes have been defined. Next, the standard elements have been manufactured with different attribute values with Laser Sintering, Laser Melting and Fused Deposition Modeling, and their geometrical quality was examined. From the results, Design Rules for additive manufacturing were derived and summarized in a catalogue. Findings – Due to the process independent method, Design Rules were developed that apply for the different considered additive manufacturing technologies equally. These Design Rules are completely function-independent and easily transferable to individual part designs. Research limitations/implications – The developed Design Rules can only apply for the considered boundary conditions. To extend the Design Rules’ validity, their applicability should be proven for other boundary conditions. Practical implications – The developed Design Rules practically support the design of technical parts. Additionally they can be used for training and teaching in the field of “design for additive manufacturing”. Originality/value – The developed Design Rules constitute a first step toward general Design Rules for Additive Manufacturing. Thus, they might form a suitable basis for further scientific approaches, and the Design Rules can be used to set up teaching documentations for lessons and seminars."}],"publication":"Rapid Prototyping Journal","issue":"6","type":"journal_article","department":[{"_id":"9"},{"_id":"146"},{"_id":"219"},{"_id":"624"}],"date_created":"2021-06-15T11:09:20Z"},{"user_id":"38077","_id":"22395","language":[{"iso":"eng"}],"date_updated":"2022-01-06T06:55:32Z","title":"Entwicklung einer Methode zur systematischen Erarbeitung von Maßtoleranzen für additive Fertigungsverfahren","year":"2015","status":"public","author":[{"first_name":"Tobias","last_name":"Lieneke","full_name":"Lieneke, Tobias"},{"full_name":"Adam, Guido","last_name":"Adam","first_name":"Guido"},{"last_name":"Leuders","first_name":"Stefan","full_name":"Leuders, Stefan"},{"first_name":"Frederick","last_name":"Knoop","full_name":"Knoop, Frederick"},{"full_name":"Josupeit, Stefan","first_name":"Stefan","last_name":"Josupeit"},{"full_name":"Delfs, Patrick","last_name":"Delfs","first_name":"Patrick"},{"full_name":"Funke, Nils","last_name":"Funke","first_name":"Nils"},{"first_name":"Detmar","last_name":"Zimmer","full_name":"Zimmer, Detmar","id":"604"}],"type":"conference","department":[{"_id":"9"},{"_id":"146"},{"_id":"219"},{"_id":"624"},{"_id":"367"},{"_id":"150"}],"date_created":"2021-06-15T11:09:21Z","publication":"Proceedings of the Rapid Tech 2015","citation":{"ama":"Lieneke T, Adam G, Leuders S, et al. Entwicklung einer Methode zur systematischen Erarbeitung von Maßtoleranzen für additive Fertigungsverfahren. In: <i>Proceedings of the Rapid Tech 2015</i>. ; 2015.","bibtex":"@inproceedings{Lieneke_Adam_Leuders_Knoop_Josupeit_Delfs_Funke_Zimmer_2015, title={Entwicklung einer Methode zur systematischen Erarbeitung von Maßtoleranzen für additive Fertigungsverfahren}, booktitle={Proceedings of the Rapid Tech 2015}, author={Lieneke, Tobias and Adam, Guido and Leuders, Stefan and Knoop, Frederick and Josupeit, Stefan and Delfs, Patrick and Funke, Nils and Zimmer, Detmar}, year={2015} }","mla":"Lieneke, Tobias, et al. “Entwicklung Einer Methode Zur Systematischen Erarbeitung von Maßtoleranzen Für Additive Fertigungsverfahren.” <i>Proceedings of the Rapid Tech 2015</i>, 2015.","chicago":"Lieneke, Tobias, Guido Adam, Stefan Leuders, Frederick Knoop, Stefan Josupeit, Patrick Delfs, Nils Funke, and Detmar Zimmer. “Entwicklung Einer Methode Zur Systematischen Erarbeitung von Maßtoleranzen Für Additive Fertigungsverfahren.” In <i>Proceedings of the Rapid Tech 2015</i>, 2015.","short":"T. Lieneke, G. Adam, S. Leuders, F. Knoop, S. Josupeit, P. Delfs, N. Funke, D. Zimmer, in: Proceedings of the Rapid Tech 2015, 2015.","apa":"Lieneke, T., Adam, G., Leuders, S., Knoop, F., Josupeit, S., Delfs, P., … Zimmer, D. (2015). Entwicklung einer Methode zur systematischen Erarbeitung von Maßtoleranzen für additive Fertigungsverfahren. In <i>Proceedings of the Rapid Tech 2015</i>.","ieee":"T. Lieneke <i>et al.</i>, “Entwicklung einer Methode zur systematischen Erarbeitung von Maßtoleranzen für additive Fertigungsverfahren,” in <i>Proceedings of the Rapid Tech 2015</i>, 2015."}},{"publication":"26th Annual International Solid Freeform Fabrication Symposium","citation":{"bibtex":"@inproceedings{Lieneke_Adam_Leuders_Knoop_Josupeit_Delfs_Funke_Zimmer_2015, title={Systematical determination of tolerances for additive manufacturing by measuring linear dimensions}, volume={26}, DOI={<a href=\"https://www.researchgate.net/publication/316827402_Systematical_Determination_of_Tolerances_for_Additive_Manufacturing_by_Measuring_Linear_Dimensions\">https://www.researchgate.net/publication/316827402_Systematical_Determination_of_Tolerances_for_Additive_Manufacturing_by_Measuring_Linear_Dimensions</a>}, booktitle={26th Annual International Solid Freeform Fabrication Symposium}, author={Lieneke, Tobias and Adam, Guido and Leuders, Stefan and Knoop, Frederick and Josupeit, Stefan and Delfs, Patrick and Funke, Nils and Zimmer, Detmar}, year={2015}, pages={371–384} }","ama":"Lieneke T, Adam G, Leuders S, et al. Systematical determination of tolerances for additive manufacturing by measuring linear dimensions. In: <i>26th Annual International Solid Freeform Fabrication Symposium</i>. Vol 26. ; 2015:371-384. doi:<a href=\"https://www.researchgate.net/publication/316827402_Systematical_Determination_of_Tolerances_for_Additive_Manufacturing_by_Measuring_Linear_Dimensions\">https://www.researchgate.net/publication/316827402_Systematical_Determination_of_Tolerances_for_Additive_Manufacturing_by_Measuring_Linear_Dimensions</a>","mla":"Lieneke, Tobias, et al. “Systematical Determination of Tolerances for Additive Manufacturing by Measuring Linear Dimensions.” <i>26th Annual International Solid Freeform Fabrication Symposium</i>, vol. 26, 2015, pp. 371–84, doi:<a href=\"https://www.researchgate.net/publication/316827402_Systematical_Determination_of_Tolerances_for_Additive_Manufacturing_by_Measuring_Linear_Dimensions\">https://www.researchgate.net/publication/316827402_Systematical_Determination_of_Tolerances_for_Additive_Manufacturing_by_Measuring_Linear_Dimensions</a>.","chicago":"Lieneke, Tobias, Guido Adam, Stefan Leuders, Frederick Knoop, Stefan Josupeit, Patrick Delfs, Nils Funke, and Detmar Zimmer. “Systematical Determination of Tolerances for Additive Manufacturing by Measuring Linear Dimensions.” In <i>26th Annual International Solid Freeform Fabrication Symposium</i>, 26:371–84, 2015. <a href=\"https://www.researchgate.net/publication/316827402_Systematical_Determination_of_Tolerances_for_Additive_Manufacturing_by_Measuring_Linear_Dimensions\">https://www.researchgate.net/publication/316827402_Systematical_Determination_of_Tolerances_for_Additive_Manufacturing_by_Measuring_Linear_Dimensions</a>.","short":"T. Lieneke, G. Adam, S. Leuders, F. Knoop, S. Josupeit, P. Delfs, N. Funke, D. Zimmer, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 371–384.","ieee":"T. Lieneke <i>et al.</i>, “Systematical determination of tolerances for additive manufacturing by measuring linear dimensions,” in <i>26th Annual International Solid Freeform Fabrication Symposium</i>, 2015, vol. 26, pp. 371–384.","apa":"Lieneke, T., Adam, G., Leuders, S., Knoop, F., Josupeit, S., Delfs, P., … Zimmer, D. (2015). Systematical determination of tolerances for additive manufacturing by measuring linear dimensions. In <i>26th Annual International Solid Freeform Fabrication Symposium</i> (Vol. 26, pp. 371–384). <a href=\"https://www.researchgate.net/publication/316827402_Systematical_Determination_of_Tolerances_for_Additive_Manufacturing_by_Measuring_Linear_Dimensions\">https://www.researchgate.net/publication/316827402_Systematical_Determination_of_Tolerances_for_Additive_Manufacturing_by_Measuring_Linear_Dimensions</a>"},"abstract":[{"lang":"eng","text":"Additive manufacturing offers many technical and economical benefits. In order to profit from these benefits, it is necessary to consider the manufacturing limits and restrictions. This applies in particular to the geometrical accuracy. Therefore, the achievable geometrical accuracy needs to be investigated, which enables the determination of realistic tolerances. Thus, two different aims are considered. The first aim is the determination of dimensional tolerances that can be stated if additive manufacturing is used under normal workshop conditions. Within the second aim, relevant process parameters and manufacturing influences will be optimized in order to reduce dimensional deviations. To achieve both aims a method was developed first. This method identifies relevant influential factors on the geometrical accuracy for the processes Fused Deposition Modeling (FDM), Laser Sintering (LS) and Laser Melting (LM). Factors were selected that are expected to affect the geometrical accuracy mainly. The first investigations deal with measuring linear dimensions on a designed test specimen and the derivation of achievable dimensional tolerances. This paper will present both, the developed method and the first results of the experimental investigations."}],"date_created":"2021-06-15T11:09:22Z","type":"conference","department":[{"_id":"9"},{"_id":"146"},{"_id":"219"},{"_id":"624"},{"_id":"367"},{"_id":"150"}],"title":"Systematical determination of tolerances for additive manufacturing by measuring linear dimensions","year":"2015","status":"public","author":[{"id":"13956","last_name":"Lieneke","first_name":"Tobias","full_name":"Lieneke, Tobias"},{"full_name":"Adam, Guido","first_name":"Guido","last_name":"Adam"},{"first_name":"Stefan","last_name":"Leuders","full_name":"Leuders, Stefan"},{"first_name":"Frederick","last_name":"Knoop","full_name":"Knoop, Frederick"},{"full_name":"Josupeit, Stefan","first_name":"Stefan","last_name":"Josupeit"},{"last_name":"Delfs","first_name":"Patrick","full_name":"Delfs, Patrick"},{"full_name":"Funke, Nils","first_name":"Nils","last_name":"Funke"},{"id":"604","full_name":"Zimmer, Detmar","first_name":"Detmar","last_name":"Zimmer"}],"date_updated":"2022-01-06T06:55:32Z","intvolume":"        26","page":"371-384","language":[{"iso":"eng"}],"_id":"22396","doi":"https://www.researchgate.net/publication/316827402_Systematical_Determination_of_Tolerances_for_Additive_Manufacturing_by_Measuring_Linear_Dimensions","user_id":"38077","volume":26},{"publication_identifier":{"isbn":["978-3-8440-3474-5"]},"author":[{"last_name":"Adam","first_name":"Guido","full_name":"Adam, Guido"}],"status":"public","title":"Systematische Erarbeitung von Konstruktionsregeln für die additiven Fertigungsverfahren Lasersintern, Laserschmelzen und Fused Deposition Modeling","year":"2015","date_updated":"2022-01-06T06:55:32Z","_id":"22397","language":[{"iso":"eng"}],"publisher":"Shaker Verlag","user_id":"38077","citation":{"bibtex":"@book{Adam_2015, title={Systematische Erarbeitung von Konstruktionsregeln für die additiven Fertigungsverfahren Lasersintern, Laserschmelzen und Fused Deposition Modeling}, publisher={Shaker Verlag}, author={Adam, Guido}, year={2015} }","ama":"Adam G. <i>Systematische Erarbeitung von Konstruktionsregeln Für Die Additiven Fertigungsverfahren Lasersintern, Laserschmelzen Und Fused Deposition Modeling</i>. Shaker Verlag; 2015.","mla":"Adam, Guido. <i>Systematische Erarbeitung von Konstruktionsregeln Für Die Additiven Fertigungsverfahren Lasersintern, Laserschmelzen Und Fused Deposition Modeling</i>. Shaker Verlag, 2015.","chicago":"Adam, Guido. <i>Systematische Erarbeitung von Konstruktionsregeln Für Die Additiven Fertigungsverfahren Lasersintern, Laserschmelzen Und Fused Deposition Modeling</i>. Shaker Verlag, 2015.","short":"G. Adam, Systematische Erarbeitung von Konstruktionsregeln Für Die Additiven Fertigungsverfahren Lasersintern, Laserschmelzen Und Fused Deposition Modeling, Shaker Verlag, 2015.","ieee":"G. Adam, <i>Systematische Erarbeitung von Konstruktionsregeln für die additiven Fertigungsverfahren Lasersintern, Laserschmelzen und Fused Deposition Modeling</i>. Shaker Verlag, 2015.","apa":"Adam, G. (2015). <i>Systematische Erarbeitung von Konstruktionsregeln für die additiven Fertigungsverfahren Lasersintern, Laserschmelzen und Fused Deposition Modeling</i>. Shaker Verlag."},"date_created":"2021-06-15T11:09:23Z","department":[{"_id":"9"},{"_id":"146"},{"_id":"219"},{"_id":"624"}],"type":"dissertation"},{"_id":"22398","user_id":"38077","author":[{"full_name":"Adam, Guido","first_name":"Guido","last_name":"Adam"}],"title":"On tolerances for additive manufacturing","year":"2015","status":"public","date_updated":"2022-01-06T06:55:32Z","date_created":"2021-06-15T11:09:25Z","department":[{"_id":"9"},{"_id":"146"},{"_id":"219"},{"_id":"624"}],"type":"conference","citation":{"short":"G. Adam, in: Inside 3D Printing Conference and Expo, 2015.","chicago":"Adam, Guido. “On Tolerances for Additive Manufacturing.” In <i>Inside 3D Printing Conference and Expo</i>, 2015.","ieee":"G. Adam, “On tolerances for additive manufacturing,” in <i>Inside 3D Printing Conference and Expo</i>, 2015.","apa":"Adam, G. (2015). On tolerances for additive manufacturing. In <i>Inside 3D Printing Conference and Expo</i>.","bibtex":"@inproceedings{Adam_2015, title={On tolerances for additive manufacturing}, booktitle={Inside 3D Printing Conference and Expo}, author={Adam, Guido}, year={2015} }","ama":"Adam G. On tolerances for additive manufacturing. In: <i>Inside 3D Printing Conference and Expo</i>. ; 2015.","mla":"Adam, Guido. “On Tolerances for Additive Manufacturing.” <i>Inside 3D Printing Conference and Expo</i>, 2015."},"publication":"Inside 3D Printing Conference and Expo"},{"date_created":"2021-06-15T11:09:26Z","type":"conference","department":[{"_id":"9"},{"_id":"146"},{"_id":"219"},{"_id":"624"}],"publication":"Rapid Tech 2015","citation":{"ama":"Lieneke T. Entwicklung einer Methode zur systematischen Erarbeitung von Maßtoleranzen für additive Fertigungsverfahren. In: <i>Rapid Tech 2015</i>. ; 2015.","bibtex":"@inproceedings{Lieneke_2015, title={Entwicklung einer Methode zur systematischen Erarbeitung von Maßtoleranzen für additive Fertigungsverfahren}, booktitle={Rapid Tech 2015}, author={Lieneke, Tobias}, year={2015} }","mla":"Lieneke, Tobias. “Entwicklung Einer Methode Zur Systematischen Erarbeitung von Maßtoleranzen Für Additive Fertigungsverfahren.” <i>Rapid Tech 2015</i>, 2015.","chicago":"Lieneke, Tobias. “Entwicklung Einer Methode Zur Systematischen Erarbeitung von Maßtoleranzen Für Additive Fertigungsverfahren.” In <i>Rapid Tech 2015</i>, 2015.","short":"T. Lieneke, in: Rapid Tech 2015, 2015.","apa":"Lieneke, T. (2015). Entwicklung einer Methode zur systematischen Erarbeitung von Maßtoleranzen für additive Fertigungsverfahren. In <i>Rapid Tech 2015</i>.","ieee":"T. Lieneke, “Entwicklung einer Methode zur systematischen Erarbeitung von Maßtoleranzen für additive Fertigungsverfahren,” in <i>Rapid Tech 2015</i>, 2015."},"language":[{"iso":"eng"}],"_id":"22399","user_id":"38077","status":"public","title":"Entwicklung einer Methode zur systematischen Erarbeitung von Maßtoleranzen für additive Fertigungsverfahren","year":"2015","author":[{"id":"13956","full_name":"Lieneke, Tobias","first_name":"Tobias","last_name":"Lieneke"}],"date_updated":"2022-01-06T06:55:32Z"},{"publication":"26th Annual International Solid Freeform Fabrication Symposium","citation":{"ieee":"T. Lieneke, “Systematical determination of dimensional tolerances for additive manufacturing ,” in <i>26th Annual International Solid Freeform Fabrication Symposium</i>, 2015, vol. 26.","apa":"Lieneke, T. (2015). Systematical determination of dimensional tolerances for additive manufacturing . In <i>26th Annual International Solid Freeform Fabrication Symposium</i> (Vol. 26).","short":"T. Lieneke, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015.","chicago":"Lieneke, Tobias. “Systematical Determination of Dimensional Tolerances for Additive Manufacturing .” In <i>26th Annual International Solid Freeform Fabrication Symposium</i>, Vol. 26, 2015.","mla":"Lieneke, Tobias. “Systematical Determination of Dimensional Tolerances for Additive Manufacturing .” <i>26th Annual International Solid Freeform Fabrication Symposium</i>, vol. 26, 2015.","bibtex":"@inproceedings{Lieneke_2015, title={Systematical determination of dimensional tolerances for additive manufacturing }, volume={26}, booktitle={26th Annual International Solid Freeform Fabrication Symposium}, author={Lieneke, Tobias}, year={2015} }","ama":"Lieneke T. Systematical determination of dimensional tolerances for additive manufacturing . In: <i>26th Annual International Solid Freeform Fabrication Symposium</i>. Vol 26. ; 2015."},"date_created":"2021-06-15T11:09:27Z","type":"conference","department":[{"_id":"9"},{"_id":"146"},{"_id":"219"},{"_id":"624"}],"year":"2015","title":"Systematical determination of dimensional tolerances for additive manufacturing ","status":"public","author":[{"id":"13956","full_name":"Lieneke, Tobias","last_name":"Lieneke","first_name":"Tobias"}],"date_updated":"2022-01-06T06:55:32Z","intvolume":"        26","_id":"22400","language":[{"iso":"eng"}],"user_id":"38077","volume":26},{"publication":"Konstruktion - Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe ","issue":"1-2","citation":{"mla":"Hölscher, Christian, et al. “Intelligente Betriebsstrategien Für Mehrmotorenantriebssysteme.” <i>Konstruktion - Zeitschrift Für Produktentwicklung Und Ingenieur-Werkstoffe </i>, vol. 67, no. 1–2, Springer-VDI-Verlag , 2015, pp. 55–66.","ama":"Hölscher C, Strop M, Zimmer D. Intelligente Betriebsstrategien für Mehrmotorenantriebssysteme. <i>Konstruktion - Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe </i>. 2015;67(1-2):55-66.","bibtex":"@article{Hölscher_Strop_Zimmer_2015, title={Intelligente Betriebsstrategien für Mehrmotorenantriebssysteme}, volume={67}, number={1–2}, journal={Konstruktion - Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe }, publisher={Springer-VDI-Verlag }, author={Hölscher, Christian and Strop, Malte and Zimmer, Detmar}, year={2015}, pages={55–66} }","apa":"Hölscher, C., Strop, M., &#38; Zimmer, D. (2015). Intelligente Betriebsstrategien für Mehrmotorenantriebssysteme. <i>Konstruktion - Zeitschrift Für Produktentwicklung Und Ingenieur-Werkstoffe </i>, <i>67</i>(1–2), 55–66.","ieee":"C. Hölscher, M. Strop, and D. Zimmer, “Intelligente Betriebsstrategien für Mehrmotorenantriebssysteme,” <i>Konstruktion - Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe </i>, vol. 67, no. 1–2, pp. 55–66, 2015.","short":"C. Hölscher, M. Strop, D. Zimmer, Konstruktion - Zeitschrift Für Produktentwicklung Und Ingenieur-Werkstoffe  67 (2015) 55–66.","chicago":"Hölscher, Christian, Malte Strop, and Detmar Zimmer. “Intelligente Betriebsstrategien Für Mehrmotorenantriebssysteme.” <i>Konstruktion - Zeitschrift Für Produktentwicklung Und Ingenieur-Werkstoffe </i> 67, no. 1–2 (2015): 55–66."},"date_created":"2021-06-15T11:09:28Z","type":"journal_article","department":[{"_id":"9"},{"_id":"146"}],"title":"Intelligente Betriebsstrategien für Mehrmotorenantriebssysteme","year":"2015","status":"public","author":[{"full_name":"Hölscher, Christian","first_name":"Christian","last_name":"Hölscher"},{"full_name":"Strop, Malte","last_name":"Strop","first_name":"Malte"},{"first_name":"Detmar","last_name":"Zimmer","full_name":"Zimmer, Detmar","id":"604"}],"publication_identifier":{"isbn":["0373-3300"]},"date_updated":"2022-01-06T06:55:32Z","intvolume":"        67","page":"55-66","language":[{"iso":"eng"}],"_id":"22401","publisher":"Springer-VDI-Verlag ","user_id":"38077","volume":67},{"user_id":"38077","_id":"22402","publisher":"Der Andere Verlag","language":[{"iso":"eng"}],"date_updated":"2022-01-06T06:55:32Z","author":[{"full_name":"Wiehe, Ansgar","last_name":"Wiehe","first_name":"Ansgar"}],"publication_identifier":{"isbn":["978-3-86247-541-4"]},"title":"Ein Beitrag zur modellbasierten Entwicklung magnetorheologischer Bremsen","year":"2015","status":"public","department":[{"_id":"9"},{"_id":"146"}],"type":"dissertation","date_created":"2021-06-15T11:09:29Z","citation":{"apa":"Wiehe, A. (2015). <i>Ein Beitrag zur modellbasierten Entwicklung magnetorheologischer Bremsen</i>. Der Andere Verlag.","mla":"Wiehe, Ansgar. <i>Ein Beitrag Zur Modellbasierten Entwicklung Magnetorheologischer Bremsen</i>. Der Andere Verlag, 2015.","ieee":"A. Wiehe, <i>Ein Beitrag zur modellbasierten Entwicklung magnetorheologischer Bremsen</i>. Der Andere Verlag, 2015.","ama":"Wiehe A. <i>Ein Beitrag Zur Modellbasierten Entwicklung Magnetorheologischer Bremsen</i>. Der Andere Verlag; 2015.","short":"A. Wiehe, Ein Beitrag Zur Modellbasierten Entwicklung Magnetorheologischer Bremsen, Der Andere Verlag, 2015.","chicago":"Wiehe, Ansgar. <i>Ein Beitrag Zur Modellbasierten Entwicklung Magnetorheologischer Bremsen</i>. Der Andere Verlag, 2015.","bibtex":"@book{Wiehe_2015, title={Ein Beitrag zur modellbasierten Entwicklung magnetorheologischer Bremsen}, publisher={Der Andere Verlag}, author={Wiehe, Ansgar}, year={2015} }"}},{"department":[{"_id":"146"}],"type":"patent","date_created":"2021-07-05T13:33:56Z","application_number":"12158900.6","ipc":"F16J 15/00","applicant":["Lenze Drives GmbH; Universität Paderborn"],"application_date":"2012-03-09","citation":{"mla":"Zimmer, Detmar, et al. <i>Wellendichtsysteme</i>. 2015.","bibtex":"@article{Zimmer_Nolte_Hütte_2015, title={Wellendichtsysteme}, author={Zimmer, Detmar and Nolte, Karsten and Hütte, Jürgen}, year={2015} }","ama":"Zimmer D, Nolte K, Hütte J. Wellendichtsysteme. 2015.","ieee":"D. Zimmer, K. Nolte, and J. Hütte, “Wellendichtsysteme.” 2015.","apa":"Zimmer, D., Nolte, K., &#38; Hütte, J. (2015). Wellendichtsysteme.","chicago":"Zimmer, Detmar, Karsten Nolte, and Jürgen Hütte. “Wellendichtsysteme,” 2015.","short":"D. Zimmer, K. Nolte, J. Hütte, (2015)."},"publication_date":"2015-05-06","user_id":"38077","_id":"22530","ipn":"EP 2 497 977 B1.","date_updated":"2022-01-06T06:55:36Z","author":[{"first_name":"Detmar","last_name":"Zimmer","full_name":"Zimmer, Detmar","id":"604"},{"last_name":"Nolte","first_name":"Karsten","full_name":"Nolte, Karsten"},{"first_name":"Jürgen","last_name":"Hütte","full_name":"Hütte, Jürgen"}],"status":"public","title":"Wellendichtsysteme","year":"2015"},{"intvolume":"        31","publication_status":"published","date_updated":"2022-01-06T06:55:38Z","publication_identifier":{"issn":["0743-7463","1520-5827"]},"author":[{"full_name":"Teschome, Bezu","last_name":"Teschome","first_name":"Bezu"},{"full_name":"Facsko, Stefan","first_name":"Stefan","last_name":"Facsko"},{"first_name":"Kurt V.","last_name":"Gothelf","full_name":"Gothelf, Kurt V."},{"id":"48864","orcid":"0000-0001-7139-3110","last_name":"Keller","first_name":"Adrian","full_name":"Keller, Adrian"}],"year":"2015","status":"public","title":"Alignment of Gold Nanoparticle-Decorated DNA Origami Nanotubes: Substrate Prepatterning versus Molecular Combing","volume":31,"user_id":"48864","doi":"10.1021/acs.langmuir.5b02569","language":[{"iso":"eng"}],"_id":"22679","page":"12823-12829","citation":{"mla":"Teschome, Bezu, et al. “Alignment of Gold Nanoparticle-Decorated DNA Origami Nanotubes: Substrate Prepatterning versus Molecular Combing.” <i>Langmuir</i>, vol. 31, 2015, pp. 12823–29, doi:<a href=\"https://doi.org/10.1021/acs.langmuir.5b02569\">10.1021/acs.langmuir.5b02569</a>.","bibtex":"@article{Teschome_Facsko_Gothelf_Keller_2015, title={Alignment of Gold Nanoparticle-Decorated DNA Origami Nanotubes: Substrate Prepatterning versus Molecular Combing}, volume={31}, DOI={<a href=\"https://doi.org/10.1021/acs.langmuir.5b02569\">10.1021/acs.langmuir.5b02569</a>}, journal={Langmuir}, author={Teschome, Bezu and Facsko, Stefan and Gothelf, Kurt V. and Keller, Adrian}, year={2015}, pages={12823–12829} }","ama":"Teschome B, Facsko S, Gothelf KV, Keller A. Alignment of Gold Nanoparticle-Decorated DNA Origami Nanotubes: Substrate Prepatterning versus Molecular Combing. <i>Langmuir</i>. 2015;31:12823-12829. doi:<a href=\"https://doi.org/10.1021/acs.langmuir.5b02569\">10.1021/acs.langmuir.5b02569</a>","ieee":"B. Teschome, S. Facsko, K. V. Gothelf, and A. Keller, “Alignment of Gold Nanoparticle-Decorated DNA Origami Nanotubes: Substrate Prepatterning versus Molecular Combing,” <i>Langmuir</i>, vol. 31, pp. 12823–12829, 2015.","apa":"Teschome, B., Facsko, S., Gothelf, K. V., &#38; Keller, A. (2015). Alignment of Gold Nanoparticle-Decorated DNA Origami Nanotubes: Substrate Prepatterning versus Molecular Combing. <i>Langmuir</i>, <i>31</i>, 12823–12829. <a href=\"https://doi.org/10.1021/acs.langmuir.5b02569\">https://doi.org/10.1021/acs.langmuir.5b02569</a>","chicago":"Teschome, Bezu, Stefan Facsko, Kurt V. Gothelf, and Adrian Keller. “Alignment of Gold Nanoparticle-Decorated DNA Origami Nanotubes: Substrate Prepatterning versus Molecular Combing.” <i>Langmuir</i> 31 (2015): 12823–29. <a href=\"https://doi.org/10.1021/acs.langmuir.5b02569\">https://doi.org/10.1021/acs.langmuir.5b02569</a>.","short":"B. Teschome, S. Facsko, K.V. Gothelf, A. Keller, Langmuir 31 (2015) 12823–12829."},"publication":"Langmuir","department":[{"_id":"302"}],"type":"journal_article","date_created":"2021-07-08T12:58:26Z"},{"date_created":"2021-07-08T12:59:15Z","type":"journal_article","department":[{"_id":"302"}],"publication":"Corrosion Science","citation":{"mla":"Giner, Ignacio, et al. “Fundamental Understanding of the Corrosion and Biomineralization of MgO Surfaces – An in Situ AFM Study.” <i>Corrosion Science</i>, vol. 100, 2015, pp. 496–503, doi:<a href=\"https://doi.org/10.1016/j.corsci.2015.08.024\">10.1016/j.corsci.2015.08.024</a>.","ama":"Giner I, Keller A, Grundmeier G. Fundamental understanding of the corrosion and biomineralization of MgO surfaces – An in situ AFM study. <i>Corrosion Science</i>. 2015;100:496-503. doi:<a href=\"https://doi.org/10.1016/j.corsci.2015.08.024\">10.1016/j.corsci.2015.08.024</a>","bibtex":"@article{Giner_Keller_Grundmeier_2015, title={Fundamental understanding of the corrosion and biomineralization of MgO surfaces – An in situ AFM study}, volume={100}, DOI={<a href=\"https://doi.org/10.1016/j.corsci.2015.08.024\">10.1016/j.corsci.2015.08.024</a>}, journal={Corrosion Science}, author={Giner, Ignacio and Keller, Adrian and Grundmeier, Guido}, year={2015}, pages={496–503} }","apa":"Giner, I., Keller, A., &#38; Grundmeier, G. (2015). Fundamental understanding of the corrosion and biomineralization of MgO surfaces – An in situ AFM study. <i>Corrosion Science</i>, <i>100</i>, 496–503. <a href=\"https://doi.org/10.1016/j.corsci.2015.08.024\">https://doi.org/10.1016/j.corsci.2015.08.024</a>","ieee":"I. Giner, A. Keller, and G. Grundmeier, “Fundamental understanding of the corrosion and biomineralization of MgO surfaces – An in situ AFM study,” <i>Corrosion Science</i>, vol. 100, pp. 496–503, 2015.","short":"I. Giner, A. Keller, G. Grundmeier, Corrosion Science 100 (2015) 496–503.","chicago":"Giner, Ignacio, Adrian Keller, and Guido Grundmeier. “Fundamental Understanding of the Corrosion and Biomineralization of MgO Surfaces – An in Situ AFM Study.” <i>Corrosion Science</i> 100 (2015): 496–503. <a href=\"https://doi.org/10.1016/j.corsci.2015.08.024\">https://doi.org/10.1016/j.corsci.2015.08.024</a>."},"page":"496-503","_id":"22680","language":[{"iso":"eng"}],"doi":"10.1016/j.corsci.2015.08.024","user_id":"48864","volume":100,"status":"public","title":"Fundamental understanding of the corrosion and biomineralization of MgO surfaces – An in situ AFM study","year":"2015","author":[{"first_name":"Ignacio","last_name":"Giner","full_name":"Giner, Ignacio"},{"last_name":"Keller","first_name":"Adrian","orcid":"0000-0001-7139-3110","full_name":"Keller, Adrian","id":"48864"},{"last_name":"Grundmeier","first_name":"Guido","full_name":"Grundmeier, Guido","id":"194"}],"publication_identifier":{"issn":["0010-938X"]},"date_updated":"2022-01-06T06:55:38Z","publication_status":"published","intvolume":"       100"},{"department":[{"_id":"302"}],"type":"journal_article","date_created":"2021-07-08T12:59:52Z","citation":{"short":"I. Wittenbrink, A. Hausmann, K. Schickle, I. Lauria, R. Davtalab, M. Foss, A. Keller, H. Fischer, Biomaterials 62 (2015) 58–65.","chicago":"Wittenbrink, Isabel, Anne Hausmann, Karolina Schickle, Ines Lauria, Roswitha Davtalab, Morten Foss, Adrian Keller, and Horst Fischer. “Low-Aspect Ratio Nanopatterns on Bioinert Alumina Influence the Response and Morphology of Osteoblast-like Cells.” <i>Biomaterials</i> 62 (2015): 58–65. <a href=\"https://doi.org/10.1016/j.biomaterials.2015.05.026\">https://doi.org/10.1016/j.biomaterials.2015.05.026</a>.","ieee":"I. Wittenbrink <i>et al.</i>, “Low-aspect ratio nanopatterns on bioinert alumina influence the response and morphology of osteoblast-like cells,” <i>Biomaterials</i>, vol. 62, pp. 58–65, 2015.","apa":"Wittenbrink, I., Hausmann, A., Schickle, K., Lauria, I., Davtalab, R., Foss, M., … Fischer, H. (2015). Low-aspect ratio nanopatterns on bioinert alumina influence the response and morphology of osteoblast-like cells. <i>Biomaterials</i>, <i>62</i>, 58–65. <a href=\"https://doi.org/10.1016/j.biomaterials.2015.05.026\">https://doi.org/10.1016/j.biomaterials.2015.05.026</a>","bibtex":"@article{Wittenbrink_Hausmann_Schickle_Lauria_Davtalab_Foss_Keller_Fischer_2015, title={Low-aspect ratio nanopatterns on bioinert alumina influence the response and morphology of osteoblast-like cells}, volume={62}, DOI={<a href=\"https://doi.org/10.1016/j.biomaterials.2015.05.026\">10.1016/j.biomaterials.2015.05.026</a>}, journal={Biomaterials}, author={Wittenbrink, Isabel and Hausmann, Anne and Schickle, Karolina and Lauria, Ines and Davtalab, Roswitha and Foss, Morten and Keller, Adrian and Fischer, Horst}, year={2015}, pages={58–65} }","ama":"Wittenbrink I, Hausmann A, Schickle K, et al. Low-aspect ratio nanopatterns on bioinert alumina influence the response and morphology of osteoblast-like cells. <i>Biomaterials</i>. 2015;62:58-65. doi:<a href=\"https://doi.org/10.1016/j.biomaterials.2015.05.026\">10.1016/j.biomaterials.2015.05.026</a>","mla":"Wittenbrink, Isabel, et al. “Low-Aspect Ratio Nanopatterns on Bioinert Alumina Influence the Response and Morphology of Osteoblast-like Cells.” <i>Biomaterials</i>, vol. 62, 2015, pp. 58–65, doi:<a href=\"https://doi.org/10.1016/j.biomaterials.2015.05.026\">10.1016/j.biomaterials.2015.05.026</a>."},"publication":"Biomaterials","volume":62,"user_id":"48864","doi":"10.1016/j.biomaterials.2015.05.026","language":[{"iso":"eng"}],"_id":"22681","page":"58-65","intvolume":"        62","publication_status":"published","date_updated":"2022-01-06T06:55:38Z","author":[{"full_name":"Wittenbrink, Isabel","last_name":"Wittenbrink","first_name":"Isabel"},{"full_name":"Hausmann, Anne","last_name":"Hausmann","first_name":"Anne"},{"last_name":"Schickle","first_name":"Karolina","full_name":"Schickle, Karolina"},{"last_name":"Lauria","first_name":"Ines","full_name":"Lauria, Ines"},{"first_name":"Roswitha","last_name":"Davtalab","full_name":"Davtalab, Roswitha"},{"full_name":"Foss, Morten","first_name":"Morten","last_name":"Foss"},{"first_name":"Adrian","last_name":"Keller","orcid":"0000-0001-7139-3110","full_name":"Keller, Adrian","id":"48864"},{"full_name":"Fischer, Horst","last_name":"Fischer","first_name":"Horst"}],"publication_identifier":{"issn":["0142-9612"]},"title":"Low-aspect ratio nanopatterns on bioinert alumina influence the response and morphology of osteoblast-like cells","status":"public","year":"2015"},{"volume":201,"user_id":"48864","doi":"10.1016/j.jbiotec.2014.12.022","language":[{"iso":"eng"}],"_id":"22682","page":"54-59","intvolume":"       201","publication_status":"published","date_updated":"2022-01-06T06:55:38Z","publication_identifier":{"issn":["0168-1656"]},"author":[{"first_name":"Michael","last_name":"Mayer","full_name":"Mayer, Michael"},{"first_name":"Adrian","last_name":"Keller","orcid":"0000-0001-7139-3110","full_name":"Keller, Adrian","id":"48864"},{"full_name":"Szewzyk, Ulrich","first_name":"Ulrich","last_name":"Szewzyk"},{"full_name":"Warnecke, Hans-Joachim","last_name":"Warnecke","first_name":"Hans-Joachim"}],"status":"public","title":"On the way to identify microorganisms in drinking water distribution networks via DNA analysis of the gut content of freshwater isopods","year":"2015","department":[{"_id":"302"}],"type":"journal_article","date_created":"2021-07-08T13:00:28Z","citation":{"bibtex":"@article{Mayer_Keller_Szewzyk_Warnecke_2015, title={On the way to identify microorganisms in drinking water distribution networks via DNA analysis of the gut content of freshwater isopods}, volume={201}, DOI={<a href=\"https://doi.org/10.1016/j.jbiotec.2014.12.022\">10.1016/j.jbiotec.2014.12.022</a>}, journal={Journal of Biotechnology}, author={Mayer, Michael and Keller, Adrian and Szewzyk, Ulrich and Warnecke, Hans-Joachim}, year={2015}, pages={54–59} }","ama":"Mayer M, Keller A, Szewzyk U, Warnecke H-J. On the way to identify microorganisms in drinking water distribution networks via DNA analysis of the gut content of freshwater isopods. <i>Journal of Biotechnology</i>. 2015;201:54-59. doi:<a href=\"https://doi.org/10.1016/j.jbiotec.2014.12.022\">10.1016/j.jbiotec.2014.12.022</a>","short":"M. Mayer, A. Keller, U. Szewzyk, H.-J. Warnecke, Journal of Biotechnology 201 (2015) 54–59.","chicago":"Mayer, Michael, Adrian Keller, Ulrich Szewzyk, and Hans-Joachim Warnecke. “On the Way to Identify Microorganisms in Drinking Water Distribution Networks via DNA Analysis of the Gut Content of Freshwater Isopods.” <i>Journal of Biotechnology</i> 201 (2015): 54–59. <a href=\"https://doi.org/10.1016/j.jbiotec.2014.12.022\">https://doi.org/10.1016/j.jbiotec.2014.12.022</a>.","ieee":"M. Mayer, A. Keller, U. Szewzyk, and H.-J. Warnecke, “On the way to identify microorganisms in drinking water distribution networks via DNA analysis of the gut content of freshwater isopods,” <i>Journal of Biotechnology</i>, vol. 201, pp. 54–59, 2015.","apa":"Mayer, M., Keller, A., Szewzyk, U., &#38; Warnecke, H.-J. (2015). On the way to identify microorganisms in drinking water distribution networks via DNA analysis of the gut content of freshwater isopods. <i>Journal of Biotechnology</i>, <i>201</i>, 54–59. <a href=\"https://doi.org/10.1016/j.jbiotec.2014.12.022\">https://doi.org/10.1016/j.jbiotec.2014.12.022</a>","mla":"Mayer, Michael, et al. “On the Way to Identify Microorganisms in Drinking Water Distribution Networks via DNA Analysis of the Gut Content of Freshwater Isopods.” <i>Journal of Biotechnology</i>, vol. 201, 2015, pp. 54–59, doi:<a href=\"https://doi.org/10.1016/j.jbiotec.2014.12.022\">10.1016/j.jbiotec.2014.12.022</a>."},"publication":"Journal of Biotechnology"},{"date_created":"2021-07-15T08:38:14Z","place":"New York, NY, USA","type":"conference","publication":"{Proceedings of the 6th ACM/SPEC International Conference on Performance Engineering (ICPE)}","citation":{"short":"M. Becker, S. Lehrig, S. Becker, in: {Proceedings of the 6th ACM/SPEC International Conference on Performance Engineering (ICPE)}, ACM, New York, NY, USA, 2015, pp. 169–174.","ama":"Becker M, Lehrig S, Becker S. Systematically Deriving Quality Metrics for Cloud Computing Systems. In: <i>{Proceedings of the 6th ACM/SPEC International Conference on Performance Engineering (ICPE)}</i>. Vol 15. New York, NY, USA: ACM; 2015:169-174. doi:<a href=\"https://doi.org/10.1145/2668930.2688043\">10.1145/2668930.2688043</a>","chicago":"Becker, Matthias, Sebastian Lehrig, and Steffen Becker. “Systematically Deriving Quality Metrics for Cloud Computing Systems.” In <i>{Proceedings of the 6th ACM/SPEC International Conference on Performance Engineering (ICPE)}</i>, 15:169–74. New York, NY, USA: ACM, 2015. <a href=\"https://doi.org/10.1145/2668930.2688043\">https://doi.org/10.1145/2668930.2688043</a>.","bibtex":"@inproceedings{Becker_Lehrig_Becker_2015, place={New York, NY, USA}, title={Systematically Deriving Quality Metrics for Cloud Computing Systems}, volume={15}, DOI={<a href=\"https://doi.org/10.1145/2668930.2688043\">10.1145/2668930.2688043</a>}, booktitle={{Proceedings of the 6th ACM/SPEC International Conference on Performance Engineering (ICPE)}}, publisher={ACM}, author={Becker, Matthias and Lehrig, Sebastian and Becker, Steffen}, year={2015}, pages={169–174} }","apa":"Becker, M., Lehrig, S., &#38; Becker, S. (2015). Systematically Deriving Quality Metrics for Cloud Computing Systems. In <i>{Proceedings of the 6th ACM/SPEC International Conference on Performance Engineering (ICPE)}</i> (Vol. 15, pp. 169–174). New York, NY, USA: ACM. <a href=\"https://doi.org/10.1145/2668930.2688043\">https://doi.org/10.1145/2668930.2688043</a>","mla":"Becker, Matthias, et al. “Systematically Deriving Quality Metrics for Cloud Computing Systems.” <i>{Proceedings of the 6th ACM/SPEC International Conference on Performance Engineering (ICPE)}</i>, vol. 15, ACM, 2015, pp. 169–74, doi:<a href=\"https://doi.org/10.1145/2668930.2688043\">10.1145/2668930.2688043</a>.","ieee":"M. Becker, S. Lehrig, and S. Becker, “Systematically Deriving Quality Metrics for Cloud Computing Systems,” in <i>{Proceedings of the 6th ACM/SPEC International Conference on Performance Engineering (ICPE)}</i>, 2015, vol. 15, pp. 169–174."},"page":"169-174","_id":"22742","publisher":"ACM","user_id":"4870","doi":"10.1145/2668930.2688043","volume":15,"title":"Systematically Deriving Quality Metrics for Cloud Computing Systems","status":"public","year":"2015","author":[{"full_name":"Becker, Matthias","last_name":"Becker","first_name":"Matthias"},{"last_name":"Lehrig","first_name":"Sebastian","full_name":"Lehrig, Sebastian"},{"full_name":"Becker, Steffen","first_name":"Steffen","last_name":"Becker"}],"publication_identifier":{"isbn":["978-1-4503-3248-4"]},"date_updated":"2022-01-06T06:55:39Z","intvolume":"        15"},{"date_updated":"2022-01-06T06:55:41Z","author":[{"full_name":"Fahr, Rene","first_name":"Rene","last_name":"Fahr","id":"111"},{"first_name":"Behnud","orcid":"0000-0002-6271-5912","last_name":"Mir Djawadi","full_name":"Mir Djawadi, Behnud","id":"26032"}],"year":"2015","title":"“…and they are really lying”: Clean Evidence on the Pervasiveness of Cheating in Professional Contexts from a Field Experiment.","doi":"10.1016/j.joep.2015.03.002","language":[{"iso":"eng"}],"abstract":[{"text":"We investigate the pervasiveness of lying in professional contexts such as insurance fraud, tax evasion and untrue job applications. We argue that lying in professional contexts share three characterizing features: (1) the gain from the dishonest behavior is uncertain, (2) the harm that lying may cause to the other party is only indirect and (3) lies are more indirect lies by action or written statements. Conducted as a field experiment with a heterogenous group of participants during a University ‘‘Open House Day’’, our ‘‘gumball-machineexperiment’’ provides field evidence on how preferences for lying are shaped in situations typically found in professional contexts which we consider to be particularly prone to lying behavior compared to other contexts. As a key innovation, our experimental design allows measuring exact levels of cheating behavior under anonymous conditions. We find clean evidence that cheating is prevalent across all sub groups and that more than 32% of the population cheats for their own gain. However, an analysis of the cheating rates with respect to highest educational degree and professional status reveals that students cheat more than non-students. This finding warrants a careful interpretation of generalizing laboratory findings with student subjects about the prevalence of cheating in the population.","lang":"eng"}],"publication":"Journal of Economic Psychology","department":[{"_id":"179"}],"type":"journal_article","date_created":"2017-10-17T12:41:36Z","file":[{"creator":"florida","date_created":"2018-03-21T10:33:10Z","date_updated":"2018-03-21T10:33:10Z","relation":"main_file","file_size":1341791,"access_level":"closed","file_name":"228-1-s2.0-S016748701500029X-main.pdf","content_type":"application/pdf","success":1,"file_id":"1505"}],"has_accepted_license":"1","status":"public","ddc":["040"],"user_id":"477","publisher":"Elsevier","_id":"228","page":"48-59","project":[{"_id":"1","name":"SFB 901"},{"name":"SFB 901 - Subprojekt A4","_id":"8"},{"_id":"2","name":"SFB 901 - Project Area A"}],"citation":{"ama":"Fahr R, Mir Djawadi B. “…and they are really lying”: Clean Evidence on the Pervasiveness of Cheating in Professional Contexts from a Field Experiment. <i>Journal of Economic Psychology</i>. 2015:48-59. doi:<a href=\"https://doi.org/10.1016/j.joep.2015.03.002\">10.1016/j.joep.2015.03.002</a>","bibtex":"@article{Fahr_Mir Djawadi_2015, title={“…and they are really lying”: Clean Evidence on the Pervasiveness of Cheating in Professional Contexts from a Field Experiment.}, DOI={<a href=\"https://doi.org/10.1016/j.joep.2015.03.002\">10.1016/j.joep.2015.03.002</a>}, journal={Journal of Economic Psychology}, publisher={Elsevier}, author={Fahr, Rene and Mir Djawadi, Behnud}, year={2015}, pages={48–59} }","mla":"Fahr, Rene, and Behnud Mir Djawadi. “‘…and They Are Really Lying’: Clean Evidence on the Pervasiveness of Cheating in Professional Contexts from a Field Experiment.” <i>Journal of Economic Psychology</i>, Elsevier, 2015, pp. 48–59, doi:<a href=\"https://doi.org/10.1016/j.joep.2015.03.002\">10.1016/j.joep.2015.03.002</a>.","chicago":"Fahr, Rene, and Behnud Mir Djawadi. “‘…and They Are Really Lying’: Clean Evidence on the Pervasiveness of Cheating in Professional Contexts from a Field Experiment.” <i>Journal of Economic Psychology</i>, 2015, 48–59. <a href=\"https://doi.org/10.1016/j.joep.2015.03.002\">https://doi.org/10.1016/j.joep.2015.03.002</a>.","short":"R. Fahr, B. Mir Djawadi, Journal of Economic Psychology (2015) 48–59.","apa":"Fahr, R., &#38; Mir Djawadi, B. (2015). “…and they are really lying”: Clean Evidence on the Pervasiveness of Cheating in Professional Contexts from a Field Experiment. <i>Journal of Economic Psychology</i>, 48–59. <a href=\"https://doi.org/10.1016/j.joep.2015.03.002\">https://doi.org/10.1016/j.joep.2015.03.002</a>","ieee":"R. Fahr and B. Mir Djawadi, “‘…and they are really lying’: Clean Evidence on the Pervasiveness of Cheating in Professional Contexts from a Field Experiment.,” <i>Journal of Economic Psychology</i>, pp. 48–59, 2015."},"file_date_updated":"2018-03-21T10:33:10Z"}]