@inproceedings{21705,
  abstract     = {{Additive Fertigungsverfahren bieten in der Luftfahrtindustrie großes Potential. Die Geometriefreiheit ermöglicht die Produktion von komplexen und gewichtsoptimierten Bauteilen. Die mangelnde Erfahrung der Unternehmen mit dieser Fertigungstechnologie erschwert jedoch die Entscheidung, an welcher Stelle Additive Manufacturing ökonomisch sinnvoll eingesetzt werden kann. Die Kosteneinflussfaktoren unterscheiden sich an vielen Stellen von denen traditioneller Fertigungsverfahren und müssen gänzlich neu bewertet und eingeordnet werden. Dabei verlagert sich auch der Fokus weg von den reinen Herstellkosten hinzu einer ganzheitlichen Kostenbetrachtung. Wesentliche Vorteile lassen sich auch meist in der Supply Chain erzielen und müssen im Zuge des Entscheidungsprozesses für ein Fertigungsverfahren bei einem bestimmten Bauteil berücksichtigt werden. Daher werden in der Präsentation die Charakteristika der Luftfahrt analysiert und die Methodik einer Entscheidungsunterstützung vorgestellt. Im Zuge dessen gilt es die Kostenbewertung additiver Fertigungsverfahren näher zu beleuchten, um die Fertigungs- bzw. Reperaturkosten mit traditionellen Verfahren vergleichen zu können. Weiterhin müssen Veränderungen in der Supply Chain identifiziert und bewertbar gemacht werden. Qualitätskriterien müssen ebenfalls mit in die Betrachtung einbezogen werden. Anschließend wird aufgeziegt wie diese Einflussfaktoren in die Entscheidungsunterstützung integriert sind.}},
  author       = {{Deppe, G. and Koch, R.}},
  booktitle    = {{Rapid Tech 2016}},
  isbn         = {{978-3-446-45017-2}},
  pages        = {{349--360}},
  publisher    = {{Hanser Verlag}},
  title        = {{{Unterstützung des AM Entscheidungsprozesses in der Luftfahrtersatzteilversorgung}}},
  doi          = {{https://doi.org/10.3139/9783446450608.031}},
  volume       = {{13}},
  year         = {{2016}},
}

@inproceedings{21728,
  author       = {{Heppner, Sabrina and Dransfeld, Marius and Domik, Gitta}},
  booktitle    = {{Informatik 2016}},
  editor       = {{Pinzger, Martin and Mayr, Heinrich}},
  isbn         = {{978-3-88579-653-4}},
  pages        = {{1591--1604}},
  publisher    = {{Gesellschaft für Informatik e.V.}},
  title        = {{{Adding atmospheric scattering and transparency to a deferred rendering pipeline for camera based ADAS tests}}},
  year         = {{2016}},
}

@inproceedings{21729,
  author       = {{Heppner, S. and Dransfeld, M. and Domik, Gitta}},
  booktitle    = {{Vision, Modeling & Visualization}},
  editor       = {{Hullin, M. and Stamminger, M. and Weinkauf, T.}},
  isbn         = {{978-3-03868-025-3}},
  publisher    = {{The Eurographics Association}},
  title        = {{{A Deferred Rendering Pipeline Including a Global Illumination Model for Atmospheric Scattering and Transparency}}},
  doi          = {{10.2312/vmv.20161458}},
  year         = {{2016}},
}

@article{21730,
  author       = {{Yanaka, K. and Yamanouchi, T.}},
  journal      = {{IEEE Computer Graphics and Applications}},
  number       = {{2}},
  pages        = {{68--73}},
  publisher    = {{Editors G. Domik and G. S. Owen}},
  title        = {{{3D Image Display Courses for Information Media Students}}},
  doi          = {{10.1109/MCG.2016.36}},
  volume       = {{36}},
  year         = {{2016}},
}

@article{21731,
  author       = {{Santos, B. S. and Ferreira, B. Q. and Dias, P.}},
  journal      = {{IEEE Computer Graphics and Applications}},
  number       = {{1}},
  pages        = {{86--90}},
  publisher    = {{IEEE}},
  title        = {{{Using Heuristic Evaluation to Foster Visualization Analysis and Design Skills}}},
  doi          = {{10.1109/MCG.2016.7}},
  volume       = {{36}},
  year         = {{2016}},
}

@inproceedings{218,
  abstract     = {{In the Image Processing domain, automated generation of complex Image Processing functionality is highly desirable; e.g., for rapid prototyping. Service composition techniques, in turn, facilitate automated generation of complex functionality based on building blocks in terms of services. For that reason, we aim for transferring the Service Composition paradigm into the Image Processing domain. In this paper, we present our symbolic composition approach that enables us to automatically generate Image Processing applications. Functionality of Image Processing services is described by means of a variant of first-order logic, which grounds on domain knowledge operationalized in terms of ontologies. A Petri-net formalism serves as basis for modeling data-flow of services and composed services. A planning-based composition algorithm automatically composes complex data-flow for a required functionality. A brief evaluation serves as proof of concept.}},
  author       = {{Jungmann, Alexander and Kleinjohann, Bernd}},
  booktitle    = {{Proceedings of the 13th IEEE International Conference on Services Computing (SCC)}},
  pages        = {{106----113}},
  title        = {{{Automatic Composition of Service-based Image Processing Applications}}},
  doi          = {{10.1109/SCC.2016.21}},
  year         = {{2016}},
}

@inproceedings{219,
  abstract     = {{Existing software markets like Google Play allow users to search among available Apps and select one based on the description provided for the App or based on its rating. Future software markets facilitate on-the-fly composition of such Apps based on users’ individual wishes. Realizing such On-The-Fly Computing (OTF) markets requires support of sophisticated software features. In addition, suitable orchestration among such features needs to ensure well-alignment of business and IT aspects in case of run-time changes like market dynamics. However, all these introduce new architectural and management complexities, which are specific to such markets. An architecture framework for OTF markets will include design solutions to overcome these complexities. In my PhD, I aim at identifying an architecture framework for OTF markets including main architectural building blocks and a systematic development process. Such an architecture framework enables the development of OTF markets in the future. Furthermore, this knowledge can be used as a basis to improve existing software markets by integrating missing functionalities.}},
  author       = {{Jazayeri, Bahar}},
  booktitle    = {{Proceedings of the 10th European Conference on Software Architecture (ECSA Workshops)}},
  pages        = {{42}},
  publisher    = {{ACM}},
  title        = {{{Architectural Management of On-The-Fly Computing Markets}}},
  doi          = {{10.1145/2993412.3010821}},
  year         = {{2016}},
}

@book{21904,
  abstract     = {{Reviews/Rezensionen:
Lasagabaster (2017) in der Zeitschrift Journal of Immersion and Content-Based Language Education, 5(1) :https://www.jbe-platform.com/content/journals/10.1075/jicb.5.1.06las]

Burmeister (2019) in der Zeitschrift Fremdsprachen Lehren und Lernen, 48(1): http://www.periodicals.narr.de/index.php/flul/article/view/4836

Breeze (2018) in der Zeitschrift Estudios sobre Educación, 34(1): https://www.unav.edu/publicaciones/revistas/index.php/estudios-sobre-educacion/article/download/21762/17478}},
  author       = {{Rumlich, Dominik}},
  publisher    = {{Lang}},
  title        = {{{Evaluating bilingual education in Germany: CLIL students’ general English proficiency, EFL self-concept and interest}}},
  year         = {{2016}},
}

@article{21937,
  author       = {{Nüske, Feliks and Schneider, Reinhold and Vitalini, Francesca and Noé, Frank}},
  issn         = {{0021-9606}},
  journal      = {{The Journal of Chemical Physics}},
  title        = {{{Variational tensor approach for approximating the rare-event kinetics of macromolecular systems}}},
  doi          = {{10.1063/1.4940774}},
  year         = {{2016}},
}

@inproceedings{21997,
  abstract     = {{The paper gives an overview of actually used Additive Manufacturing (AM) data formats and AM data infrastructure. Based on empirical analysis of the actual situation, necessary improvement of data management and exchange formats in context with AM technology is derived. The purpose of this paper is to understand the actual use of data formats and management in the field of AM. The paper draws conclusions based on an empirical analysis of the used data formats dependent on stakeholder groups. The results of the expert survey show a necessity to improve or develop new AM specific data formats.}},
  author       = {{Gräßler, I. and Taplick, P. and Pottebaum, J. and Scholle, P. and Reiher, T.}},
  booktitle    = {{14th International DESIGN Conference 2016}},
  title        = {{{Data Management for additive manufacturing: survey on requirements and current state}}},
  doi          = {{https://www.designsociety.org/publication/38831/DATA+MANAGEMENT+FOR+ADDITIVE+MANUFACTURING%3A+SURVEY+ON+REQUIREMENTS+AND+CURRENT+STATE}},
  volume       = {{14}},
  year         = {{2016}},
}

@phdthesis{220,
  author       = {{Keller, Matthias}},
  publisher    = {{Universität Paderborn}},
  title        = {{{Application Deployment at Distributed Clouds}}},
  year         = {{2016}},
}

@inproceedings{22019,
  abstract     = {{The mechanical characterization of fused deposition modeling (FDM) parts is mostly done by static tests. In many applications, parts are also dynamically loaded. Here, fatigue tests can help to identify the expected lifetime of a part. This article discusses the fatigue behavior of FDM specimens manufactured with Ultem 9085. For this, tensile bars are manufactured according to ASTM D638 in different build orientations. Tests are performed in a range of pulsating tensile stresses, and S-N curves are documented for different build orientations. For higher loads, the FDM anisotropy characterizes the lifetime of used specimens, which is similar to static tensile bars. For lower loads, including a higher number of cycles to failure, S-N curves of different build orientations converge. In further tests, tensile bars were chemically smoothed with chloroform vapor. Chemical smoothing reduces surface roughness and increases tensile strength of specimens in the upright build direction. Fatigue tests of chemically treated specimens show no significant lifetime increase.}},
  author       = {{Fischer, M. and Schöppner, Volker}},
  booktitle    = {{27th Annual International Solid Freeform Fabrication Symposium }},
  pages        = {{563–568}},
  title        = {{{Fatigue Behavior of FDM Parts Manufactured with Ultem 9085}}},
  doi          = {{10.1007/s11837-016-2197-2}},
  volume       = {{27}},
  year         = {{2016}},
}

@article{22025,
  abstract     = {{Das Fraunhofer-Institut für Werkstoff- und Strahltechnik IWS etablierte in enger Kooperation mit Partnern in den letzten Jahren erfolgreich eine geschlossene Technologiekette zur Umsetzung maßgeschneiderter mikrophysiologischer Systeme. Darauf aufbauend wurde eine universelle Mikrobearbeitungsplattform zum automatisierten Fertigen konzipiert und entwickelt. Dies umfasst neue Technologien für Schlüsselprozesse wie das Herstellen mikrofluidischer Komponenten mittels ARBURG Kunststoff-Freiformen sowie das Erzeugen funktionaler Strukturen und das Einbringen von Produktschutzmerkmalen auf innenliegenden Polymergrenzflächen mittels Direktem Laserinterferenz-Verfahren.}},
  author       = {{Moritzer, Elmar and Hirsch, André and Günther, K. and Teutoburg-Weiss, S. and Lasagni, A.F. and Klotzbach, U. and Sonntag, F.}},
  isbn         = {{978-3-95908-078-1}},
  journal      = {{6. Dresdner Medizintechnik-Symposium, Biomedizinische Technik - interdisziplinär, integrativ und innovativ}},
  pages        = {{65--70}},
  title        = {{{Universelle Mikrobearbeitungsplaffform und Basistechnologien für das Fertigen und Markieren mikrophysiologischer Systeme}}},
  volume       = {{6}},
  year         = {{2016}},
}

@inproceedings{22039,
  abstract     = {{The material Ultem 9085 is a flame-retardant thermoplastic polymer, which can be processed with Fused Deposition Modeling (FDM). Due to ist high strength-to-weight ratio and FST rating, Ultem 9085 parts are used in aviation. Process related staircase effects on rounded and slanting part areas require a surface treatment for end use parts. These processes include smoothing by mass finishing or coating in order to reduce surface roughness. An alternative smoothing technique is chemical surface treatment, such as the use of Acetone for ABS materials. In this paper, the surface of Ultem 9085 parts is treated with Chloroform vapor in order to solve material at the surface and smooth it. Therefore, specimens built in different build orientations are treated and tested with regard to surface roughness values and mechancial strength properties. The analysis of surface roughness and treatment time shows a significantly higher efficiency for chemical treatment in comparison to mass finishing. By employing chemical treatment, it is possible to reduce surface roughness by more than 80 % to Rz values of approximately 15 µm. Mechanical tests and measurements of the Melt Volume Rate (MVR) show no material destruction for chemical surface treatment at room temperature for less than 150 min.}},
  author       = {{Fischer, M. and Seewald, O. and Schöppner, Volker}},
  booktitle    = {{Rapid Tech - International Trade Show & Conference for Additive Manufacturing}},
  pages        = {{121--133}},
  publisher    = {{Carl Hanser Verlag GmbH & Co. KG}},
  title        = {{{Chemical Surface Treatment of Ultem 9085 Parts}}},
  doi          = {{10.3139/9783446450608.010}},
  year         = {{2016}},
}

@inbook{9251,
  author       = {{Beutner, Marc and Schneider, J}},
  booktitle    = {{OER – Quality Standards, Implementation, Sharing and Use. Results and Discussions on the basis of EU-StORe project}},
  editor       = {{Beutner, Marc}},
  pages        = {{11 -- 17}},
  title        = {{{The Importance of OER in European Education}}},
  year         = {{2016}},
}

@inbook{9252,
  author       = {{Beutner, Marc and Schneider, J}},
  booktitle    = {{OER – Quality Standards, Implementation, Sharing and Use. Results and Discussions on the basis of EU-StORe project}},
  editor       = {{Beutner, Marc}},
  pages        = {{19 -- 27}},
  title        = {{{The EU-StORe Project}}},
  year         = {{2016}},
}

@inbook{9253,
  author       = {{Beutner, Marc and Schneider, J}},
  booktitle    = {{OER – Quality Standards, Implementation, Sharing and Use. Results and Discussions on the basis of EU-StORe project}},
  editor       = {{Beutner, Marc}},
  pages        = {{29 -- 41}},
  title        = {{{The OER Quality Standards}}},
  year         = {{2016}},
}

@inbook{9254,
  author       = {{Beutner, Marc and Duse, C and Pechuel, R and Schneider, J}},
  booktitle    = {{OER – Quality Standards, Implementation, Sharing and Use. Results and Discussions on the basis of EU-StORe project}},
  editor       = {{Beutner, Marc}},
  pages        = {{43 -- 50}},
  title        = {{{Insights in the OER Rating – Database – Structures, Advantages and Challanges}}},
  year         = {{2016}},
}

@inbook{9255,
  author       = {{Beutner, Marc and Schneider, J}},
  booktitle    = {{OER – Quality Standards, Implementation, Sharing and Use. Results and Discussions on the basis of EU-StORe project}},
  editor       = {{Beutner, Marc}},
  pages        = {{53 -- 61}},
  title        = {{{Use and Implementation of OERs in Germany}}},
  year         = {{2016}},
}

@inbook{9256,
  author       = {{Beutner, Marc and Schneider, J}},
  booktitle    = {{OER – Quality Standards, Implementation, Sharing and Use. Results and Discussions on the basis of EU-StORe project}},
  editor       = {{Beutner, Marc}},
  pages        = {{117 -- 133}},
  title        = {{{Evaluation Results concerning OER and the EU-StORe Project}}},
  year         = {{2016}},
}