---
_id: '27251'
author:
- first_name: Elmar
  full_name: Moritzer, Elmar
  id: '20531'
  last_name: Moritzer
- first_name: T.
  full_name: Nordmeyer, T.
  last_name: Nordmeyer
- first_name: L.
  full_name: Enneking, L.
  last_name: Enneking
- first_name: A.
  full_name: Grishin, A.
  last_name: Grishin
- first_name: A.
  full_name: Knospe, A.
  last_name: Knospe
- first_name: C.
  full_name: Buske, C.
  last_name: Buske
citation:
  ama: 'Moritzer E, Nordmeyer T, Enneking L, Grishin A, Knospe A, Buske C. Development
    of an Inline Plasma Treatment During Injection Molding Process. In: <i>74th Annual
    Technical Conference of the Society of Plastics Engineers (ANTEC)</i>. ; 2016.'
  apa: Moritzer, E., Nordmeyer, T., Enneking, L., Grishin, A., Knospe, A., &#38; Buske,
    C. (2016). Development of an Inline Plasma Treatment During Injection Molding
    Process. <i>74th Annual Technical Conference of the Society of Plastics Engineers
    (ANTEC)</i>. 74th Annual Technical Conference of the Society of Plastics Engineers
    (ANTEC), Indianapolis (USA).
  bibtex: '@inproceedings{Moritzer_Nordmeyer_Enneking_Grishin_Knospe_Buske_2016, place={Indianapolis
    (USA)}, title={Development of an Inline Plasma Treatment During Injection Molding
    Process}, booktitle={74th Annual Technical Conference of the Society of Plastics
    Engineers (ANTEC)}, author={Moritzer, Elmar and Nordmeyer, T. and Enneking, L.
    and Grishin, A. and Knospe, A. and Buske, C.}, year={2016} }'
  chicago: Moritzer, Elmar, T. Nordmeyer, L. Enneking, A. Grishin, A. Knospe, and
    C. Buske. “Development of an Inline Plasma Treatment During Injection Molding
    Process.” In <i>74th Annual Technical Conference of the Society of Plastics Engineers
    (ANTEC)</i>. Indianapolis (USA), 2016.
  ieee: E. Moritzer, T. Nordmeyer, L. Enneking, A. Grishin, A. Knospe, and C. Buske,
    “Development of an Inline Plasma Treatment During Injection Molding Process,”
    presented at the 74th Annual Technical Conference of the Society of Plastics Engineers
    (ANTEC), Indianapolis (USA), 2016.
  mla: Moritzer, Elmar, et al. “Development of an Inline Plasma Treatment During Injection
    Molding Process.” <i>74th Annual Technical Conference of the Society of Plastics
    Engineers (ANTEC)</i>, 2016.
  short: 'E. Moritzer, T. Nordmeyer, L. Enneking, A. Grishin, A. Knospe, C. Buske,
    in: 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC),
    Indianapolis (USA), 2016.'
conference:
  location: Indianapolis (USA)
  name: 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC)
date_created: 2021-11-08T10:08:11Z
date_updated: 2022-01-06T06:57:36Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
place: Indianapolis (USA)
publication: 74th Annual Technical Conference of the Society of Plastics Engineers
  (ANTEC)
status: public
title: Development of an Inline Plasma Treatment During Injection Molding Process
type: conference
user_id: '44116'
year: '2016'
...
---
_id: '27252'
author:
- first_name: Elmar
  full_name: Moritzer, Elmar
  id: '20531'
  last_name: Moritzer
- first_name: C.
  full_name: Budde, C.
  last_name: Budde
- first_name: M.
  full_name: Hüttner, M.
  last_name: Hüttner
citation:
  ama: 'Moritzer E, Budde C, Hüttner M. Die Riveting – A New Joining Technology for
    Composite Sheet-Metal-Hybrid Joints. In: <i>Joining in Car Body Engineering 2016</i>.
    ; 2016.'
  apa: Moritzer, E., Budde, C., &#38; Hüttner, M. (2016). Die Riveting – A New Joining
    Technology for Composite Sheet-Metal-Hybrid Joints. <i>Joining in Car Body Engineering
    2016</i>. Joining in Car Body Engineering 2016, Bad Nauheim (Deutschland).
  bibtex: '@inproceedings{Moritzer_Budde_Hüttner_2016, place={Bad Nauheim (Deutschland)},
    title={Die Riveting – A New Joining Technology for Composite Sheet-Metal-Hybrid
    Joints}, booktitle={Joining in Car Body Engineering 2016}, author={Moritzer, Elmar
    and Budde, C. and Hüttner, M.}, year={2016} }'
  chicago: Moritzer, Elmar, C. Budde, and M. Hüttner. “Die Riveting – A New Joining
    Technology for Composite Sheet-Metal-Hybrid Joints.” In <i>Joining in Car Body
    Engineering 2016</i>. Bad Nauheim (Deutschland), 2016.
  ieee: E. Moritzer, C. Budde, and M. Hüttner, “Die Riveting – A New Joining Technology
    for Composite Sheet-Metal-Hybrid Joints,” presented at the Joining in Car Body
    Engineering 2016, Bad Nauheim (Deutschland), 2016.
  mla: Moritzer, Elmar, et al. “Die Riveting – A New Joining Technology for Composite
    Sheet-Metal-Hybrid Joints.” <i>Joining in Car Body Engineering 2016</i>, 2016.
  short: 'E. Moritzer, C. Budde, M. Hüttner, in: Joining in Car Body Engineering 2016,
    Bad Nauheim (Deutschland), 2016.'
conference:
  location: Bad Nauheim (Deutschland)
  name: Joining in Car Body Engineering 2016
date_created: 2021-11-08T10:09:38Z
date_updated: 2022-01-06T06:57:36Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
place: Bad Nauheim (Deutschland)
publication: Joining in Car Body Engineering 2016
status: public
title: Die Riveting – A New Joining Technology for Composite Sheet-Metal-Hybrid Joints
type: conference
user_id: '44116'
year: '2016'
...
---
_id: '27253'
author:
- first_name: Elmar
  full_name: Moritzer, Elmar
  id: '20531'
  last_name: Moritzer
- first_name: M.
  full_name: Hüttner, M.
  last_name: Hüttner
- first_name: Bernd
  full_name: Henning, Bernd
  id: '213'
  last_name: Henning
- first_name: Manuel
  full_name: Webersen, Manuel
  id: '11289'
  last_name: Webersen
  orcid: 0000-0001-6411-4232
citation:
  ama: 'Moritzer E, Hüttner M, Henning B, Webersen M. Ein Ansatz zur zerstörungsfreien
    Prüfung von hydrothermisch gealterten Polymeren. In: <i>Safe and Reliable Structures</i>.
    ; 2016.'
  apa: Moritzer, E., Hüttner, M., Henning, B., &#38; Webersen, M. (2016). Ein Ansatz
    zur zerstörungsfreien Prüfung von hydrothermisch gealterten Polymeren. <i>Safe
    and Reliable Structures</i>. Safe and Reliable Structures, Dalheim (Deutschland).
  bibtex: '@inproceedings{Moritzer_Hüttner_Henning_Webersen_2016, place={Dalheim (Deutschland)},
    title={Ein Ansatz zur zerstörungsfreien Prüfung von hydrothermisch gealterten
    Polymeren}, booktitle={Safe and Reliable Structures}, author={Moritzer, Elmar
    and Hüttner, M. and Henning, Bernd and Webersen, Manuel}, year={2016} }'
  chicago: Moritzer, Elmar, M. Hüttner, Bernd Henning, and Manuel Webersen. “Ein Ansatz
    Zur Zerstörungsfreien Prüfung von Hydrothermisch Gealterten Polymeren.” In <i>Safe
    and Reliable Structures</i>. Dalheim (Deutschland), 2016.
  ieee: E. Moritzer, M. Hüttner, B. Henning, and M. Webersen, “Ein Ansatz zur zerstörungsfreien
    Prüfung von hydrothermisch gealterten Polymeren,” presented at the Safe and Reliable
    Structures, Dalheim (Deutschland), 2016.
  mla: Moritzer, Elmar, et al. “Ein Ansatz Zur Zerstörungsfreien Prüfung von Hydrothermisch
    Gealterten Polymeren.” <i>Safe and Reliable Structures</i>, 2016.
  short: 'E. Moritzer, M. Hüttner, B. Henning, M. Webersen, in: Safe and Reliable
    Structures, Dalheim (Deutschland), 2016.'
conference:
  location: Dalheim (Deutschland)
  name: Safe and Reliable Structures
date_created: 2021-11-08T10:11:50Z
date_updated: 2022-01-06T06:57:36Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
place: Dalheim (Deutschland)
publication: Safe and Reliable Structures
status: public
title: Ein Ansatz zur zerstörungsfreien Prüfung von hydrothermisch gealterten Polymeren
type: conference
user_id: '44116'
year: '2016'
...
---
_id: '27254'
author:
- first_name: Elmar
  full_name: Moritzer, Elmar
  id: '20531'
  last_name: Moritzer
- first_name: Y.
  full_name: Martin, Y.
  last_name: Martin
citation:
  ama: 'Moritzer E, Martin Y. Experimental Investigations on the Fibre Length Degradation
    in Injection Moulds. In: <i>32nd International Conference of the Polymer Processing
    Society (PPS)</i>. ; 2016.'
  apa: Moritzer, E., &#38; Martin, Y. (2016). Experimental Investigations on the Fibre
    Length Degradation in Injection Moulds. <i>32nd International Conference of the
    Polymer Processing Society (PPS)</i>. 32nd International Conference of the Polymer
    Processing Society (PPS), Lyon (Frankreich).
  bibtex: '@inproceedings{Moritzer_Martin_2016, place={Lyon (Frankreich)}, title={Experimental
    Investigations on the Fibre Length Degradation in Injection Moulds}, booktitle={32nd
    International Conference of the Polymer Processing Society (PPS)}, author={Moritzer,
    Elmar and Martin, Y.}, year={2016} }'
  chicago: Moritzer, Elmar, and Y. Martin. “Experimental Investigations on the Fibre
    Length Degradation in Injection Moulds.” In <i>32nd International Conference of
    the Polymer Processing Society (PPS)</i>. Lyon (Frankreich), 2016.
  ieee: E. Moritzer and Y. Martin, “Experimental Investigations on the Fibre Length
    Degradation in Injection Moulds,” presented at the 32nd International Conference
    of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
  mla: Moritzer, Elmar, and Y. Martin. “Experimental Investigations on the Fibre Length
    Degradation in Injection Moulds.” <i>32nd International Conference of the Polymer
    Processing Society (PPS)</i>, 2016.
  short: 'E. Moritzer, Y. Martin, in: 32nd International Conference of the Polymer
    Processing Society (PPS), Lyon (Frankreich), 2016.'
conference:
  location: Lyon (Frankreich)
  name: 32nd International Conference of the Polymer Processing Society (PPS)
date_created: 2021-11-08T10:12:52Z
date_updated: 2022-01-06T06:57:36Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
place: Lyon (Frankreich)
publication: 32nd International Conference of the Polymer Processing Society (PPS)
status: public
title: Experimental Investigations on the Fibre Length Degradation in Injection Moulds
type: conference
user_id: '44116'
year: '2016'
...
---
_id: '27255'
author:
- first_name: Elmar
  full_name: Moritzer, Elmar
  id: '20531'
  last_name: Moritzer
- first_name: S.
  full_name: Brockhaus, S.
  last_name: Brockhaus
- first_name: G.
  full_name: Heiderich, G.
  last_name: Heiderich
citation:
  ama: 'Moritzer E, Brockhaus S, Heiderich G. Fiber Length Degradation of Glass Fiber-Reinforced
    Polypropylene during Shearing. In: <i>74th Annual Technical Conference of the
    Society of Plastics Engineers (ANTEC)</i>. ; 2016.'
  apa: Moritzer, E., Brockhaus, S., &#38; Heiderich, G. (2016). Fiber Length Degradation
    of Glass Fiber-Reinforced Polypropylene during Shearing. <i>74th Annual Technical
    Conference of the Society of Plastics Engineers (ANTEC)</i>. 74th Annual Technical
    Conference of the Society of Plastics Engineers (ANTEC), Indianapolis (USA).
  bibtex: '@inproceedings{Moritzer_Brockhaus_Heiderich_2016, place={Indianapolis (USA)},
    title={Fiber Length Degradation of Glass Fiber-Reinforced Polypropylene during
    Shearing}, booktitle={74th Annual Technical Conference of the Society of Plastics
    Engineers (ANTEC)}, author={Moritzer, Elmar and Brockhaus, S. and Heiderich, G.},
    year={2016} }'
  chicago: Moritzer, Elmar, S. Brockhaus, and G. Heiderich. “Fiber Length Degradation
    of Glass Fiber-Reinforced Polypropylene during Shearing.” In <i>74th Annual Technical
    Conference of the Society of Plastics Engineers (ANTEC)</i>. Indianapolis (USA),
    2016.
  ieee: E. Moritzer, S. Brockhaus, and G. Heiderich, “Fiber Length Degradation of
    Glass Fiber-Reinforced Polypropylene during Shearing,” presented at the 74th Annual
    Technical Conference of the Society of Plastics Engineers (ANTEC), Indianapolis
    (USA), 2016.
  mla: Moritzer, Elmar, et al. “Fiber Length Degradation of Glass Fiber-Reinforced
    Polypropylene during Shearing.” <i>74th Annual Technical Conference of the Society
    of Plastics Engineers (ANTEC)</i>, 2016.
  short: 'E. Moritzer, S. Brockhaus, G. Heiderich, in: 74th Annual Technical Conference
    of the Society of Plastics Engineers (ANTEC), Indianapolis (USA), 2016.'
conference:
  location: Indianapolis (USA)
  name: 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC)
date_created: 2021-11-08T10:14:36Z
date_updated: 2022-01-06T06:57:36Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
place: Indianapolis (USA)
publication: 74th Annual Technical Conference of the Society of Plastics Engineers
  (ANTEC)
status: public
title: Fiber Length Degradation of Glass Fiber-Reinforced Polypropylene during Shearing
type: conference
user_id: '44116'
year: '2016'
...
---
_id: '27256'
author:
- first_name: Elmar
  full_name: Moritzer, Elmar
  id: '20531'
  last_name: Moritzer
- first_name: S.
  full_name: Brockhaus, S.
  last_name: Brockhaus
- first_name: G.
  full_name: Heiderich, G.
  last_name: Heiderich
citation:
  ama: 'Moritzer E, Brockhaus S, Heiderich G. Fiber Length Degradation of Glass Fiber-Reinforced
    Polypropylene during Shearing. In: <i>16th Annual International Polymer Colloquium
    (IPC)</i>. ; 2016.'
  apa: Moritzer, E., Brockhaus, S., &#38; Heiderich, G. (2016). Fiber Length Degradation
    of Glass Fiber-Reinforced Polypropylene during Shearing. <i>16th Annual International
    Polymer Colloquium (IPC)</i>. 16th Annual International Polymer Colloquium (IPC),
    Madison (USA).
  bibtex: '@inproceedings{Moritzer_Brockhaus_Heiderich_2016, place={Madison (USA)},
    title={Fiber Length Degradation of Glass Fiber-Reinforced Polypropylene during
    Shearing}, booktitle={16th Annual International Polymer Colloquium (IPC)}, author={Moritzer,
    Elmar and Brockhaus, S. and Heiderich, G.}, year={2016} }'
  chicago: Moritzer, Elmar, S. Brockhaus, and G. Heiderich. “Fiber Length Degradation
    of Glass Fiber-Reinforced Polypropylene during Shearing.” In <i>16th Annual International
    Polymer Colloquium (IPC)</i>. Madison (USA), 2016.
  ieee: E. Moritzer, S. Brockhaus, and G. Heiderich, “Fiber Length Degradation of
    Glass Fiber-Reinforced Polypropylene during Shearing,” presented at the 16th Annual
    International Polymer Colloquium (IPC), Madison (USA), 2016.
  mla: Moritzer, Elmar, et al. “Fiber Length Degradation of Glass Fiber-Reinforced
    Polypropylene during Shearing.” <i>16th Annual International Polymer Colloquium
    (IPC)</i>, 2016.
  short: 'E. Moritzer, S. Brockhaus, G. Heiderich, in: 16th Annual International Polymer
    Colloquium (IPC), Madison (USA), 2016.'
conference:
  location: Madison (USA)
  name: 16th Annual International Polymer Colloquium (IPC)
date_created: 2021-11-08T10:15:52Z
date_updated: 2022-01-06T06:57:36Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
place: Madison (USA)
publication: 16th Annual International Polymer Colloquium (IPC)
status: public
title: Fiber Length Degradation of Glass Fiber-Reinforced Polypropylene during Shearing
type: conference
user_id: '44116'
year: '2016'
...
---
_id: '27257'
author:
- first_name: Elmar
  full_name: Moritzer, Elmar
  id: '20531'
  last_name: Moritzer
- first_name: G.
  full_name: Heiderich, G.
  last_name: Heiderich
citation:
  ama: 'Moritzer E, Heiderich G. Fiber Length Reduction during Shearing in Polymer
    Processing. In: <i>32nd International Conference of the Polymer Processing Society
    (PPS)</i>. ; 2016.'
  apa: Moritzer, E., &#38; Heiderich, G. (2016). Fiber Length Reduction during Shearing
    in Polymer Processing. <i>32nd International Conference of the Polymer Processing
    Society (PPS)</i>. 32nd International Conference of the Polymer Processing Society
    (PPS), Lyon (Frankreich).
  bibtex: '@inproceedings{Moritzer_Heiderich_2016, place={Lyon (Frankreich)}, title={Fiber
    Length Reduction during Shearing in Polymer Processing}, booktitle={32nd International
    Conference of the Polymer Processing Society (PPS)}, author={Moritzer, Elmar and
    Heiderich, G.}, year={2016} }'
  chicago: Moritzer, Elmar, and G. Heiderich. “Fiber Length Reduction during Shearing
    in Polymer Processing.” In <i>32nd International Conference of the Polymer Processing
    Society (PPS)</i>. Lyon (Frankreich), 2016.
  ieee: E. Moritzer and G. Heiderich, “Fiber Length Reduction during Shearing in Polymer
    Processing,” presented at the 32nd International Conference of the Polymer Processing
    Society (PPS), Lyon (Frankreich), 2016.
  mla: Moritzer, Elmar, and G. Heiderich. “Fiber Length Reduction during Shearing
    in Polymer Processing.” <i>32nd International Conference of the Polymer Processing
    Society (PPS)</i>, 2016.
  short: 'E. Moritzer, G. Heiderich, in: 32nd International Conference of the Polymer
    Processing Society (PPS), Lyon (Frankreich), 2016.'
conference:
  location: Lyon (Frankreich)
  name: 32nd International Conference of the Polymer Processing Society (PPS)
date_created: 2021-11-08T10:17:03Z
date_updated: 2022-01-06T06:57:36Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
place: Lyon (Frankreich)
publication: 32nd International Conference of the Polymer Processing Society (PPS)
status: public
title: Fiber Length Reduction during Shearing in Polymer Processing
type: conference
user_id: '44116'
year: '2016'
...
---
_id: '27258'
author:
- first_name: Volker
  full_name: Schöppner, Volker
  id: '20530'
  last_name: Schöppner
- first_name: M.
  full_name: Pohl, M.
  last_name: Pohl
citation:
  ama: 'Schöppner V, Pohl M. First Insight into the High Speed Extrusion of Polycarbonate.
    In: <i>32nd International Conference of the Polymer Processing Society (PPS)</i>.
    ; 2016.'
  apa: Schöppner, V., &#38; Pohl, M. (2016). First Insight into the High Speed Extrusion
    of Polycarbonate. <i>32nd International Conference of the Polymer Processing Society
    (PPS)</i>. 32nd International Conference of the Polymer Processing Society (PPS),
    Lyon (Frankreich).
  bibtex: '@inproceedings{Schöppner_Pohl_2016, place={Lyon (Frankreich)}, title={First
    Insight into the High Speed Extrusion of Polycarbonate}, booktitle={32nd International
    Conference of the Polymer Processing Society (PPS)}, author={Schöppner, Volker
    and Pohl, M.}, year={2016} }'
  chicago: Schöppner, Volker, and M. Pohl. “First Insight into the High Speed Extrusion
    of Polycarbonate.” In <i>32nd International Conference of the Polymer Processing
    Society (PPS)</i>. Lyon (Frankreich), 2016.
  ieee: V. Schöppner and M. Pohl, “First Insight into the High Speed Extrusion of
    Polycarbonate,” presented at the 32nd International Conference of the Polymer
    Processing Society (PPS), Lyon (Frankreich), 2016.
  mla: Schöppner, Volker, and M. Pohl. “First Insight into the High Speed Extrusion
    of Polycarbonate.” <i>32nd International Conference of the Polymer Processing
    Society (PPS)</i>, 2016.
  short: 'V. Schöppner, M. Pohl, in: 32nd International Conference of the Polymer
    Processing Society (PPS), Lyon (Frankreich), 2016.'
conference:
  location: Lyon (Frankreich)
  name: 32nd International Conference of the Polymer Processing Society (PPS)
date_created: 2021-11-08T10:25:11Z
date_updated: 2022-01-06T06:57:36Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
place: Lyon (Frankreich)
publication: 32nd International Conference of the Polymer Processing Society (PPS)
status: public
title: First Insight into the High Speed Extrusion of Polycarbonate
type: conference
user_id: '44116'
year: '2016'
...
---
_id: '27259'
author:
- first_name: Elmar
  full_name: Moritzer, Elmar
  id: '20531'
  last_name: Moritzer
- first_name: R.
  full_name: Kleeschulte, R.
  last_name: Kleeschulte
- first_name: S.
  full_name: Zavoral, S.
  last_name: Zavoral
- first_name: E.
  full_name: Kaiser, E.
  last_name: Kaiser
citation:
  ama: Moritzer E, Kleeschulte R, Zavoral S, Kaiser E. Gut gewickelt - Mit effektiver
    Topologieentwicklung zur belastungsorientierten Bauteilgeometrie einer Kunststoffspule
    für die Monofilindustrie. <i>Kunststoffe</i>. 2016;(106. Jg. Heft 2):54-58.
  apa: Moritzer, E., Kleeschulte, R., Zavoral, S., &#38; Kaiser, E. (2016). Gut gewickelt
    - Mit effektiver Topologieentwicklung zur belastungsorientierten Bauteilgeometrie
    einer Kunststoffspule für die Monofilindustrie. <i>Kunststoffe</i>, <i>106. Jg.
    Heft 2</i>, 54–58.
  bibtex: '@article{Moritzer_Kleeschulte_Zavoral_Kaiser_2016, title={Gut gewickelt
    - Mit effektiver Topologieentwicklung zur belastungsorientierten Bauteilgeometrie
    einer Kunststoffspule für die Monofilindustrie}, number={106. Jg. Heft 2}, journal={Kunststoffe},
    author={Moritzer, Elmar and Kleeschulte, R. and Zavoral, S. and Kaiser, E.}, year={2016},
    pages={54–58} }'
  chicago: 'Moritzer, Elmar, R. Kleeschulte, S. Zavoral, and E. Kaiser. “Gut Gewickelt
    - Mit Effektiver Topologieentwicklung Zur Belastungsorientierten Bauteilgeometrie
    Einer Kunststoffspule Für Die Monofilindustrie.” <i>Kunststoffe</i>, no. 106.
    Jg. Heft 2 (2016): 54–58.'
  ieee: E. Moritzer, R. Kleeschulte, S. Zavoral, and E. Kaiser, “Gut gewickelt - Mit
    effektiver Topologieentwicklung zur belastungsorientierten Bauteilgeometrie einer
    Kunststoffspule für die Monofilindustrie,” <i>Kunststoffe</i>, no. 106. Jg. Heft
    2, pp. 54–58, 2016.
  mla: Moritzer, Elmar, et al. “Gut Gewickelt - Mit Effektiver Topologieentwicklung
    Zur Belastungsorientierten Bauteilgeometrie Einer Kunststoffspule Für Die Monofilindustrie.”
    <i>Kunststoffe</i>, no. 106. Jg. Heft 2, 2016, pp. 54–58.
  short: E. Moritzer, R. Kleeschulte, S. Zavoral, E. Kaiser, Kunststoffe (2016) 54–58.
date_created: 2021-11-08T10:27:08Z
date_updated: 2022-01-06T06:57:36Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
issue: 106. Jg. Heft 2
language:
- iso: eng
page: 54-58
publication: Kunststoffe
publication_identifier:
  issn:
  - 0023-5563
status: public
title: Gut gewickelt - Mit effektiver Topologieentwicklung zur belastungsorientierten
  Bauteilgeometrie einer Kunststoffspule für die Monofilindustrie
type: journal_article
user_id: '44116'
year: '2016'
...
---
_id: '27260'
author:
- first_name: Elmar
  full_name: Moritzer, Elmar
  id: '20531'
  last_name: Moritzer
- first_name: N.
  full_name: Fecke, N.
  last_name: Fecke
- first_name: B.
  full_name: Landgräber, B.
  last_name: Landgräber
- first_name: W.
  full_name: Kern, W.
  last_name: Kern
- first_name: B.
  full_name: Kaynak, B.
  last_name: Kaynak
- first_name: Guido
  full_name: Grundmeier, Guido
  id: '194'
  last_name: Grundmeier
- first_name: S.
  full_name: Waschke, S.
  last_name: Waschke
citation:
  ama: Moritzer E, Fecke N, Landgräber B, et al. In Zukunft einfach entformen - Neu
    entwickelte molekulare Beschichtungen sollen die Entformungskräfte beim Spritzgießen
    verringern. <i>Kunststoffe</i>. 2016;(106. Jg. Heft 8):70-72.
  apa: Moritzer, E., Fecke, N., Landgräber, B., Kern, W., Kaynak, B., Grundmeier,
    G., &#38; Waschke, S. (2016). In Zukunft einfach entformen - Neu entwickelte molekulare
    Beschichtungen sollen die Entformungskräfte beim Spritzgießen verringern. <i>Kunststoffe</i>,
    <i>106. Jg. Heft 8</i>, 70–72.
  bibtex: '@article{Moritzer_Fecke_Landgräber_Kern_Kaynak_Grundmeier_Waschke_2016,
    title={In Zukunft einfach entformen - Neu entwickelte molekulare Beschichtungen
    sollen die Entformungskräfte beim Spritzgießen verringern}, number={106. Jg. Heft
    8}, journal={Kunststoffe}, author={Moritzer, Elmar and Fecke, N. and Landgräber,
    B. and Kern, W. and Kaynak, B. and Grundmeier, Guido and Waschke, S.}, year={2016},
    pages={70–72} }'
  chicago: 'Moritzer, Elmar, N. Fecke, B. Landgräber, W. Kern, B. Kaynak, Guido Grundmeier,
    and S. Waschke. “In Zukunft Einfach Entformen - Neu Entwickelte Molekulare Beschichtungen
    Sollen Die Entformungskräfte Beim Spritzgießen Verringern.” <i>Kunststoffe</i>,
    no. 106. Jg. Heft 8 (2016): 70–72.'
  ieee: E. Moritzer <i>et al.</i>, “In Zukunft einfach entformen - Neu entwickelte
    molekulare Beschichtungen sollen die Entformungskräfte beim Spritzgießen verringern,”
    <i>Kunststoffe</i>, no. 106. Jg. Heft 8, pp. 70–72, 2016.
  mla: Moritzer, Elmar, et al. “In Zukunft Einfach Entformen - Neu Entwickelte Molekulare
    Beschichtungen Sollen Die Entformungskräfte Beim Spritzgießen Verringern.” <i>Kunststoffe</i>,
    no. 106. Jg. Heft 8, 2016, pp. 70–72.
  short: E. Moritzer, N. Fecke, B. Landgräber, W. Kern, B. Kaynak, G. Grundmeier,
    S. Waschke, Kunststoffe (2016) 70–72.
date_created: 2021-11-08T10:31:59Z
date_updated: 2022-01-06T06:57:36Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
issue: 106. Jg. Heft 8
language:
- iso: eng
page: 70-72
publication: Kunststoffe
publication_identifier:
  issn:
  - 0023-5563
status: public
title: In Zukunft einfach entformen - Neu entwickelte molekulare Beschichtungen sollen
  die Entformungskräfte beim Spritzgießen verringern
type: journal_article
user_id: '44116'
year: '2016'
...
---
_id: '27261'
author:
- first_name: Volker
  full_name: Schöppner, Volker
  id: '20530'
  last_name: Schöppner
- first_name: I.
  full_name: Fiebig, I.
  last_name: Fiebig
citation:
  ama: Schöppner V, Fiebig I. Influence of the Initial Fiber Orientation on the Weld
    Strength in Welding of Glass Fiber Reinforced Thermoplastics. <i>International
    Journal of Polymer Science</i>. 2016;(Onlineausgabe).
  apa: Schöppner, V., &#38; Fiebig, I. (2016). Influence of the Initial Fiber Orientation
    on the Weld Strength in Welding of Glass Fiber Reinforced Thermoplastics. <i>International
    Journal of Polymer Science</i>, <i>Onlineausgabe</i>.
  bibtex: '@article{Schöppner_Fiebig_2016, title={Influence of the Initial Fiber Orientation
    on the Weld Strength in Welding of Glass Fiber Reinforced Thermoplastics}, number={Onlineausgabe},
    journal={International Journal of Polymer Science}, author={Schöppner, Volker
    and Fiebig, I.}, year={2016} }'
  chicago: Schöppner, Volker, and I. Fiebig. “Influence of the Initial Fiber Orientation
    on the Weld Strength in Welding of Glass Fiber Reinforced Thermoplastics.” <i>International
    Journal of Polymer Science</i>, no. Onlineausgabe (2016).
  ieee: V. Schöppner and I. Fiebig, “Influence of the Initial Fiber Orientation on
    the Weld Strength in Welding of Glass Fiber Reinforced Thermoplastics,” <i>International
    Journal of Polymer Science</i>, no. Onlineausgabe, 2016.
  mla: Schöppner, Volker, and I. Fiebig. “Influence of the Initial Fiber Orientation
    on the Weld Strength in Welding of Glass Fiber Reinforced Thermoplastics.” <i>International
    Journal of Polymer Science</i>, no. Onlineausgabe, 2016.
  short: V. Schöppner, I. Fiebig, International Journal of Polymer Science (2016).
date_created: 2021-11-08T10:33:12Z
date_updated: 2022-01-06T06:57:37Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
issue: Onlineausgabe
language:
- iso: eng
publication: International Journal of Polymer Science
publication_identifier:
  issn:
  - 1687-9430
status: public
title: Influence of the Initial Fiber Orientation on the Weld Strength in Welding
  of Glass Fiber Reinforced Thermoplastics
type: journal_article
user_id: '44116'
year: '2016'
...
---
_id: '27262'
author:
- first_name: Volker
  full_name: Schöppner, Volker
  id: '20530'
  last_name: Schöppner
- first_name: I.
  full_name: Fiebig, I.
  last_name: Fiebig
citation:
  ama: 'Schöppner V, Fiebig I. Investigation on Factors Influencing Fiber Orientation
    in Welding of Fiber Reinforced Thermoplastics. In: <i>69th Annual Assembly of
    the International Institute of Welding (IIW)</i>. ; 2016.'
  apa: Schöppner, V., &#38; Fiebig, I. (2016). Investigation on Factors Influencing
    Fiber Orientation in Welding of Fiber Reinforced Thermoplastics. <i>69th Annual
    Assembly of the International Institute of Welding (IIW)</i>. 69th Annual Assembly
    of the International Institute of Welding (IIW), Melbourne (Australien).
  bibtex: '@inproceedings{Schöppner_Fiebig_2016, place={Melbourne (Australien)}, title={Investigation
    on Factors Influencing Fiber Orientation in Welding of Fiber Reinforced Thermoplastics},
    booktitle={69th Annual Assembly of the International Institute of Welding (IIW)},
    author={Schöppner, Volker and Fiebig, I.}, year={2016} }'
  chicago: Schöppner, Volker, and I. Fiebig. “Investigation on Factors Influencing
    Fiber Orientation in Welding of Fiber Reinforced Thermoplastics.” In <i>69th Annual
    Assembly of the International Institute of Welding (IIW)</i>. Melbourne (Australien),
    2016.
  ieee: V. Schöppner and I. Fiebig, “Investigation on Factors Influencing Fiber Orientation
    in Welding of Fiber Reinforced Thermoplastics,” presented at the 69th Annual Assembly
    of the International Institute of Welding (IIW), Melbourne (Australien), 2016.
  mla: Schöppner, Volker, and I. Fiebig. “Investigation on Factors Influencing Fiber
    Orientation in Welding of Fiber Reinforced Thermoplastics.” <i>69th Annual Assembly
    of the International Institute of Welding (IIW)</i>, 2016.
  short: 'V. Schöppner, I. Fiebig, in: 69th Annual Assembly of the International Institute
    of Welding (IIW), Melbourne (Australien), 2016.'
conference:
  location: Melbourne (Australien)
  name: 69th Annual Assembly of the International Institute of Welding (IIW)
date_created: 2021-11-08T10:34:35Z
date_updated: 2022-01-06T06:57:37Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
place: Melbourne (Australien)
publication: 69th Annual Assembly of the International Institute of Welding (IIW)
status: public
title: Investigation on Factors Influencing Fiber Orientation in Welding of Fiber
  Reinforced Thermoplastics
type: conference
user_id: '44116'
year: '2016'
...
---
_id: '27263'
author:
- first_name: Volker
  full_name: Schöppner, Volker
  id: '20530'
  last_name: Schöppner
- first_name: J.
  full_name: Trippe, J.
  last_name: Trippe
citation:
  ama: 'Schöppner V, Trippe J. Investigations of the Influence of Material and Pellet
    Shape on the Dissipation in the Solids Conveying Zone of Single-Screw Extruders
    Based on the Discrete Element Method. In: <i>32nd International Conference of
    the Polymer Processing Society (PPS)</i>. ; 2016.'
  apa: Schöppner, V., &#38; Trippe, J. (2016). Investigations of the Influence of
    Material and Pellet Shape on the Dissipation in the Solids Conveying Zone of Single-Screw
    Extruders Based on the Discrete Element Method. <i>32nd International Conference
    of the Polymer Processing Society (PPS)</i>. 32nd International Conference of
    the Polymer Processing Society (PPS), Lyon (Frankreich).
  bibtex: '@inproceedings{Schöppner_Trippe_2016, place={Lyon (Frankreich)}, title={Investigations
    of the Influence of Material and Pellet Shape on the Dissipation in the Solids
    Conveying Zone of Single-Screw Extruders Based on the Discrete Element Method},
    booktitle={32nd International Conference of the Polymer Processing Society (PPS)},
    author={Schöppner, Volker and Trippe, J.}, year={2016} }'
  chicago: Schöppner, Volker, and J. Trippe. “Investigations of the Influence of Material
    and Pellet Shape on the Dissipation in the Solids Conveying Zone of Single-Screw
    Extruders Based on the Discrete Element Method.” In <i>32nd International Conference
    of the Polymer Processing Society (PPS)</i>. Lyon (Frankreich), 2016.
  ieee: V. Schöppner and J. Trippe, “Investigations of the Influence of Material and
    Pellet Shape on the Dissipation in the Solids Conveying Zone of Single-Screw Extruders
    Based on the Discrete Element Method,” presented at the 32nd International Conference
    of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
  mla: Schöppner, Volker, and J. Trippe. “Investigations of the Influence of Material
    and Pellet Shape on the Dissipation in the Solids Conveying Zone of Single-Screw
    Extruders Based on the Discrete Element Method.” <i>32nd International Conference
    of the Polymer Processing Society (PPS)</i>, 2016.
  short: 'V. Schöppner, J. Trippe, in: 32nd International Conference of the Polymer
    Processing Society (PPS), Lyon (Frankreich), 2016.'
conference:
  location: Lyon (Frankreich)
  name: 32nd International Conference of the Polymer Processing Society (PPS)
date_created: 2021-11-08T10:36:19Z
date_updated: 2022-01-06T06:57:37Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
place: Lyon (Frankreich)
publication: 32nd International Conference of the Polymer Processing Society (PPS)
status: public
title: Investigations of the Influence of Material and Pellet Shape on the Dissipation
  in the Solids Conveying Zone of Single-Screw Extruders Based on the Discrete Element
  Method
type: conference
user_id: '44116'
year: '2016'
...
---
_id: '27264'
author:
- first_name: Elmar
  full_name: Moritzer, Elmar
  id: '20531'
  last_name: Moritzer
- first_name: Y.
  full_name: Martin, Y.
  last_name: Martin
- first_name: E.
  full_name: Müller, E.
  last_name: Müller
citation:
  ama: Moritzer E, Martin Y, Müller E. Spritzgießdirektcompoundierung (SGDC) - Produktspezifische
    Materialentwicklung im Spritzgießprozess. <i>Kunststofftechnik - Spritzgießen
    2016</i>. 2016;(1):27-39.
  apa: Moritzer, E., Martin, Y., &#38; Müller, E. (2016). Spritzgießdirektcompoundierung
    (SGDC) - Produktspezifische Materialentwicklung im Spritzgießprozess. <i>Kunststofftechnik
    - Spritzgießen 2016</i>, <i>1</i>, 27–39.
  bibtex: '@article{Moritzer_Martin_Müller_2016, title={Spritzgießdirektcompoundierung
    (SGDC) - Produktspezifische Materialentwicklung im Spritzgießprozess}, number={1},
    journal={Kunststofftechnik - Spritzgießen 2016}, publisher={Düsseldorf: VDI Verlag
    GmbH}, author={Moritzer, Elmar and Martin, Y. and Müller, E.}, year={2016}, pages={27–39}
    }'
  chicago: 'Moritzer, Elmar, Y. Martin, and E. Müller. “Spritzgießdirektcompoundierung
    (SGDC) - Produktspezifische Materialentwicklung Im Spritzgießprozess.” <i>Kunststofftechnik
    - Spritzgießen 2016</i>, no. 1 (2016): 27–39.'
  ieee: E. Moritzer, Y. Martin, and E. Müller, “Spritzgießdirektcompoundierung (SGDC)
    - Produktspezifische Materialentwicklung im Spritzgießprozess,” <i>Kunststofftechnik
    - Spritzgießen 2016</i>, no. 1, pp. 27–39, 2016.
  mla: 'Moritzer, Elmar, et al. “Spritzgießdirektcompoundierung (SGDC) - Produktspezifische
    Materialentwicklung Im Spritzgießprozess.” <i>Kunststofftechnik - Spritzgießen
    2016</i>, no. 1, Düsseldorf: VDI Verlag GmbH, 2016, pp. 27–39.'
  short: E. Moritzer, Y. Martin, E. Müller, Kunststofftechnik - Spritzgießen 2016
    (2016) 27–39.
date_created: 2021-11-08T10:38:41Z
date_updated: 2022-01-06T06:57:37Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
issue: '1'
language:
- iso: eng
page: 27-39
publication: Kunststofftechnik - Spritzgießen 2016
publication_identifier:
  isbn:
  - '978-3-18-234344-8 '
publisher: 'Düsseldorf: VDI Verlag GmbH'
status: public
title: Spritzgießdirektcompoundierung (SGDC) - Produktspezifische Materialentwicklung
  im Spritzgießprozess
type: journal_article
user_id: '44116'
year: '2016'
...
---
_id: '27265'
author:
- first_name: Volker
  full_name: Schöppner, Volker
  id: '20530'
  last_name: Schöppner
- first_name: K.
  full_name: Westhues, K.
  last_name: Westhues
- first_name: T.
  full_name: Westhues, T.
  last_name: Westhues
citation:
  ama: 'Schöppner V, Westhues K, Westhues T. Melting Phenomena and Sample Preparation
    Method within a Partly Filled Melting Zone of Co-Rotating Twin Screw Extruders.
    In: <i>74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC)</i>.
    ; 2016.'
  apa: Schöppner, V., Westhues, K., &#38; Westhues, T. (2016). Melting Phenomena and
    Sample Preparation Method within a Partly Filled Melting Zone of Co-Rotating Twin
    Screw Extruders. <i>74th Annual Technical Conference of the Society of Plastics
    Engineers (ANTEC)</i>. 74th Annual Technical Conference of the Society of Plastics
    Engineers (ANTEC), Indianapolis (USA).
  bibtex: '@inproceedings{Schöppner_Westhues_Westhues_2016, place={Indianapolis (USA)},
    title={Melting Phenomena and Sample Preparation Method within a Partly Filled
    Melting Zone of Co-Rotating Twin Screw Extruders}, booktitle={74th Annual Technical
    Conference of the Society of Plastics Engineers (ANTEC)}, author={Schöppner, Volker
    and Westhues, K. and Westhues, T.}, year={2016} }'
  chicago: Schöppner, Volker, K. Westhues, and T. Westhues. “Melting Phenomena and
    Sample Preparation Method within a Partly Filled Melting Zone of Co-Rotating Twin
    Screw Extruders.” In <i>74th Annual Technical Conference of the Society of Plastics
    Engineers (ANTEC)</i>. Indianapolis (USA), 2016.
  ieee: V. Schöppner, K. Westhues, and T. Westhues, “Melting Phenomena and Sample
    Preparation Method within a Partly Filled Melting Zone of Co-Rotating Twin Screw
    Extruders,” presented at the 74th Annual Technical Conference of the Society of
    Plastics Engineers (ANTEC), Indianapolis (USA), 2016.
  mla: Schöppner, Volker, et al. “Melting Phenomena and Sample Preparation Method
    within a Partly Filled Melting Zone of Co-Rotating Twin Screw Extruders.” <i>74th
    Annual Technical Conference of the Society of Plastics Engineers (ANTEC)</i>,
    2016.
  short: 'V. Schöppner, K. Westhues, T. Westhues, in: 74th Annual Technical Conference
    of the Society of Plastics Engineers (ANTEC), Indianapolis (USA), 2016.'
conference:
  location: Indianapolis (USA)
  name: 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC)
date_created: 2021-11-08T10:40:11Z
date_updated: 2022-01-06T06:57:37Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
place: Indianapolis (USA)
publication: 74th Annual Technical Conference of the Society of Plastics Engineers
  (ANTEC)
status: public
title: Melting Phenomena and Sample Preparation Method within a Partly Filled Melting
  Zone of Co-Rotating Twin Screw Extruders
type: conference
user_id: '44116'
year: '2016'
...
---
_id: '27266'
author:
- first_name: Volker
  full_name: Schöppner, Volker
  id: '20530'
  last_name: Schöppner
- first_name: P.
  full_name: Kloke, P.
  last_name: Kloke
- first_name: K.
  full_name: Westhues, K.
  last_name: Westhues
citation:
  ama: 'Schöppner V, Kloke P, Westhues K. Modellierung des Glasfaserlängenabbaus.
    In: <i>PolyMerTec 2016</i>. ; 2016.'
  apa: Schöppner, V., Kloke, P., &#38; Westhues, K. (2016). Modellierung des Glasfaserlängenabbaus.
    <i>PolyMerTec 2016</i>. PolyMerTec 2016, Merseburg (Deutschland).
  bibtex: '@inproceedings{Schöppner_Kloke_Westhues_2016, place={Merseburg (Deutschland)},
    title={Modellierung des Glasfaserlängenabbaus}, booktitle={PolyMerTec 2016}, author={Schöppner,
    Volker and Kloke, P. and Westhues, K.}, year={2016} }'
  chicago: Schöppner, Volker, P. Kloke, and K. Westhues. “Modellierung Des Glasfaserlängenabbaus.”
    In <i>PolyMerTec 2016</i>. Merseburg (Deutschland), 2016.
  ieee: V. Schöppner, P. Kloke, and K. Westhues, “Modellierung des Glasfaserlängenabbaus,”
    presented at the PolyMerTec 2016, Merseburg (Deutschland), 2016.
  mla: Schöppner, Volker, et al. “Modellierung Des Glasfaserlängenabbaus.” <i>PolyMerTec
    2016</i>, 2016.
  short: 'V. Schöppner, P. Kloke, K. Westhues, in: PolyMerTec 2016, Merseburg (Deutschland),
    2016.'
conference:
  location: Merseburg (Deutschland)
  name: PolyMerTec 2016
date_created: 2021-11-08T10:41:48Z
date_updated: 2022-01-06T06:57:37Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
place: Merseburg (Deutschland)
publication: PolyMerTec 2016
status: public
title: Modellierung des Glasfaserlängenabbaus
type: conference
user_id: '44116'
year: '2016'
...
---
_id: '27267'
author:
- first_name: Elmar
  full_name: Moritzer, Elmar
  id: '20531'
  last_name: Moritzer
- first_name: M.
  full_name: Hüttner, M.
  last_name: Hüttner
- first_name: Bernd
  full_name: Henning, Bernd
  id: '213'
  last_name: Henning
- first_name: Manuel
  full_name: Webersen, Manuel
  id: '11289'
  last_name: Webersen
  orcid: 0000-0001-6411-4232
citation:
  ama: Moritzer E, Hüttner M, Henning B, Webersen M. Molekularen Schäden auf der Spur
    - Zerstörungsfreie Charakterisierung molekularer Veränderungen in gealterten Polymeren.
    <i>Kunststoffe</i>. 2016;(106. Jg. Heft 6):94-96.
  apa: Moritzer, E., Hüttner, M., Henning, B., &#38; Webersen, M. (2016). Molekularen
    Schäden auf der Spur - Zerstörungsfreie Charakterisierung molekularer Veränderungen
    in gealterten Polymeren. <i>Kunststoffe</i>, <i>106. Jg. Heft 6</i>, 94–96.
  bibtex: '@article{Moritzer_Hüttner_Henning_Webersen_2016, title={Molekularen Schäden
    auf der Spur - Zerstörungsfreie Charakterisierung molekularer Veränderungen in
    gealterten Polymeren}, number={106. Jg. Heft 6}, journal={Kunststoffe}, author={Moritzer,
    Elmar and Hüttner, M. and Henning, Bernd and Webersen, Manuel}, year={2016}, pages={94–96}
    }'
  chicago: 'Moritzer, Elmar, M. Hüttner, Bernd Henning, and Manuel Webersen. “Molekularen
    Schäden Auf Der Spur - Zerstörungsfreie Charakterisierung Molekularer Veränderungen
    in Gealterten Polymeren.” <i>Kunststoffe</i>, no. 106. Jg. Heft 6 (2016): 94–96.'
  ieee: E. Moritzer, M. Hüttner, B. Henning, and M. Webersen, “Molekularen Schäden
    auf der Spur - Zerstörungsfreie Charakterisierung molekularer Veränderungen in
    gealterten Polymeren,” <i>Kunststoffe</i>, no. 106. Jg. Heft 6, pp. 94–96, 2016.
  mla: Moritzer, Elmar, et al. “Molekularen Schäden Auf Der Spur - Zerstörungsfreie
    Charakterisierung Molekularer Veränderungen in Gealterten Polymeren.” <i>Kunststoffe</i>,
    no. 106. Jg. Heft 6, 2016, pp. 94–96.
  short: E. Moritzer, M. Hüttner, B. Henning, M. Webersen, Kunststoffe (2016) 94–96.
date_created: 2021-11-08T10:43:53Z
date_updated: 2022-01-06T06:57:37Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
issue: 106. Jg. Heft 6
language:
- iso: eng
page: 94-96
publication: Kunststoffe
publication_identifier:
  issn:
  - 0023-5563
status: public
title: Molekularen Schäden auf der Spur - Zerstörungsfreie Charakterisierung molekularer
  Veränderungen in gealterten Polymeren
type: journal_article
user_id: '44116'
year: '2016'
...
---
_id: '27268'
author:
- first_name: Volker
  full_name: Schöppner, Volker
  id: '20530'
  last_name: Schöppner
- first_name: M.
  full_name: Hüttner, M.
  last_name: Hüttner
- first_name: Bernd
  full_name: Henning, Bernd
  id: '213'
  last_name: Henning
- first_name: Manuel
  full_name: Webersen, Manuel
  id: '11289'
  last_name: Webersen
  orcid: 0000-0001-6411-4232
citation:
  ama: 'Schöppner V, Hüttner M, Henning B, Webersen M. Non-Destructive Characterization
    of Hygrothermally Aged Polymers. In: <i>74th Annual Technical Conference of the
    Society of Plastics Engineers (ANTEC)</i>. ; 2016.'
  apa: Schöppner, V., Hüttner, M., Henning, B., &#38; Webersen, M. (2016). Non-Destructive
    Characterization of Hygrothermally Aged Polymers. <i>74th Annual Technical Conference
    of the Society of Plastics Engineers (ANTEC)</i>. 74th Annual Technical Conference
    of the Society of Plastics Engineers (ANTEC), Indianapolis (USA).
  bibtex: '@inproceedings{Schöppner_Hüttner_Henning_Webersen_2016, place={Indianapolis
    (USA)}, title={Non-Destructive Characterization of Hygrothermally Aged Polymers},
    booktitle={74th Annual Technical Conference of the Society of Plastics Engineers
    (ANTEC)}, author={Schöppner, Volker and Hüttner, M. and Henning, Bernd and Webersen,
    Manuel}, year={2016} }'
  chicago: Schöppner, Volker, M. Hüttner, Bernd Henning, and Manuel Webersen. “Non-Destructive
    Characterization of Hygrothermally Aged Polymers.” In <i>74th Annual Technical
    Conference of the Society of Plastics Engineers (ANTEC)</i>. Indianapolis (USA),
    2016.
  ieee: V. Schöppner, M. Hüttner, B. Henning, and M. Webersen, “Non-Destructive Characterization
    of Hygrothermally Aged Polymers,” presented at the 74th Annual Technical Conference
    of the Society of Plastics Engineers (ANTEC), Indianapolis (USA), 2016.
  mla: Schöppner, Volker, et al. “Non-Destructive Characterization of Hygrothermally
    Aged Polymers.” <i>74th Annual Technical Conference of the Society of Plastics
    Engineers (ANTEC)</i>, 2016.
  short: 'V. Schöppner, M. Hüttner, B. Henning, M. Webersen, in: 74th Annual Technical
    Conference of the Society of Plastics Engineers (ANTEC), Indianapolis (USA), 2016.'
conference:
  location: Indianapolis (USA)
  name: 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC)
date_created: 2021-11-08T10:46:10Z
date_updated: 2022-01-06T06:57:37Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
place: Indianapolis (USA)
publication: 74th Annual Technical Conference of the Society of Plastics Engineers
  (ANTEC)
status: public
title: Non-Destructive Characterization of Hygrothermally Aged Polymers
type: conference
user_id: '44116'
year: '2016'
...
---
_id: '27269'
author:
- first_name: Elmar
  full_name: Moritzer, Elmar
  id: '20531'
  last_name: Moritzer
- first_name: C.
  full_name: Budde, C.
  last_name: Budde
- first_name: M.
  full_name: Hüttner, M.
  last_name: Hüttner
citation:
  ama: 'Moritzer E, Budde C, Hüttner M. Organoblechnieten. In: <i>22. Nationales Symposium
    SAMPE (Society for the Advancement of Material and Process Engineering) Deutschland
    e.V.</i> ; 2016.'
  apa: Moritzer, E., Budde, C., &#38; Hüttner, M. (2016). Organoblechnieten. <i>22.
    Nationales Symposium SAMPE (Society for the Advancement of Material and Process
    Engineering) Deutschland e.V.</i> 22. Nationales Symposium SAMPE (Society for
    the Advancement of Material and Process Engineering) Deutschland e.V., Fürth (Deutschland).
  bibtex: '@inproceedings{Moritzer_Budde_Hüttner_2016, place={Fürth (Deutschland)},
    title={Organoblechnieten}, booktitle={22. Nationales Symposium SAMPE (Society
    for the Advancement of Material and Process Engineering) Deutschland e.V.}, author={Moritzer,
    Elmar and Budde, C. and Hüttner, M.}, year={2016} }'
  chicago: Moritzer, Elmar, C. Budde, and M. Hüttner. “Organoblechnieten.” In <i>22.
    Nationales Symposium SAMPE (Society for the Advancement of Material and Process
    Engineering) Deutschland e.V.</i> Fürth (Deutschland), 2016.
  ieee: E. Moritzer, C. Budde, and M. Hüttner, “Organoblechnieten,” presented at the
    22. Nationales Symposium SAMPE (Society for the Advancement of Material and Process
    Engineering) Deutschland e.V., Fürth (Deutschland), 2016.
  mla: Moritzer, Elmar, et al. “Organoblechnieten.” <i>22. Nationales Symposium SAMPE
    (Society for the Advancement of Material and Process Engineering) Deutschland
    e.V.</i>, 2016.
  short: 'E. Moritzer, C. Budde, M. Hüttner, in: 22. Nationales Symposium SAMPE (Society
    for the Advancement of Material and Process Engineering) Deutschland e.V., Fürth
    (Deutschland), 2016.'
conference:
  location: Fürth (Deutschland)
  name: 22. Nationales Symposium SAMPE (Society for the Advancement of Material and
    Process Engineering) Deutschland e.V.
date_created: 2021-11-08T10:52:09Z
date_updated: 2022-01-06T06:57:37Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
place: Fürth (Deutschland)
publication: 22. Nationales Symposium SAMPE (Society for the Advancement of Material
  and Process Engineering) Deutschland e.V.
status: public
title: Organoblechnieten
type: conference
user_id: '44116'
year: '2016'
...
---
_id: '27270'
author:
- first_name: Volker
  full_name: Schöppner, Volker
  id: '20530'
  last_name: Schöppner
- first_name: T.
  full_name: Herken, T.
  last_name: Herken
- first_name: F.
  full_name: Sporkmann, F.
  last_name: Sporkmann
- first_name: F.
  full_name: Platte, F.
  last_name: Platte
citation:
  ama: Schöppner V, Herken T, Sporkmann F, Platte F. Partikel und Schmelze im dynamischen
    Netz. <i>Kunststoffe</i>. Published online 2016:70-75.
  apa: Schöppner, V., Herken, T., Sporkmann, F., &#38; Platte, F. (2016). Partikel
    und Schmelze im dynamischen Netz. <i>Kunststoffe</i>, 70–75.
  bibtex: '@article{Schöppner_Herken_Sporkmann_Platte_2016, title={Partikel und Schmelze
    im dynamischen Netz}, journal={Kunststoffe}, author={Schöppner, Volker and Herken,
    T. and Sporkmann, F. and Platte, F.}, year={2016}, pages={70–75} }'
  chicago: Schöppner, Volker, T. Herken, F. Sporkmann, and F. Platte. “Partikel Und
    Schmelze Im Dynamischen Netz.” <i>Kunststoffe</i>, 2016, 70–75.
  ieee: V. Schöppner, T. Herken, F. Sporkmann, and F. Platte, “Partikel und Schmelze
    im dynamischen Netz,” <i>Kunststoffe</i>, pp. 70–75, 2016.
  mla: Schöppner, Volker, et al. “Partikel Und Schmelze Im Dynamischen Netz.” <i>Kunststoffe</i>,
    2016, pp. 70–75.
  short: V. Schöppner, T. Herken, F. Sporkmann, F. Platte, Kunststoffe (2016) 70–75.
date_created: 2021-11-08T10:54:03Z
date_updated: 2022-01-06T06:57:37Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
page: 70-75
publication: Kunststoffe
publication_identifier:
  issn:
  - 0023-5563
status: public
title: Partikel und Schmelze im dynamischen Netz
type: journal_article
user_id: '44116'
year: '2016'
...