---
_id: '23041'
author:
- first_name: Andreas
  full_name: Kohlstedt, Andreas
  last_name: Kohlstedt
- first_name: Simon
  full_name: Olma, Simon
  last_name: Olma
- first_name: Sarah
  full_name: Flottmeier, Sarah
  last_name: Flottmeier
- first_name: Phillip
  full_name: Traphöner, Phillip
  id: '27484'
  last_name: Traphöner
- first_name: Karl-Peter
  full_name: Jäker, Karl-Peter
  last_name: Jäker
- first_name: Ansgar
  full_name: Trächtler, Ansgar
  id: '552'
  last_name: Trächtler
citation:
  ama: Kohlstedt A, Olma S, Flottmeier S, Traphöner P, Jäker K-P, Trächtler A. Control
    of a hydraulic hexapod for a Hardware-in-the-Loop axle test rig. <i>at-Automatisierungstechnik</i>.
    2016;64(5):365-374.
  apa: Kohlstedt, A., Olma, S., Flottmeier, S., Traphöner, P., Jäker, K.-P., &#38;
    Trächtler, A. (2016). Control of a hydraulic hexapod for a Hardware-in-the-Loop
    axle test rig. <i>At-Automatisierungstechnik</i>, <i>64</i>(5), 365–374.
  bibtex: '@article{Kohlstedt_Olma_Flottmeier_Traphöner_Jäker_Trächtler_2016, title={Control
    of a hydraulic hexapod for a Hardware-in-the-Loop axle test rig}, volume={64},
    number={5}, journal={at-Automatisierungstechnik}, author={Kohlstedt, Andreas and
    Olma, Simon and Flottmeier, Sarah and Traphöner, Phillip and Jäker, Karl-Peter
    and Trächtler, Ansgar}, year={2016}, pages={365–374} }'
  chicago: 'Kohlstedt, Andreas, Simon Olma, Sarah Flottmeier, Phillip Traphöner, Karl-Peter
    Jäker, and Ansgar Trächtler. “Control of a Hydraulic Hexapod for a Hardware-in-the-Loop
    Axle Test Rig.” <i>At-Automatisierungstechnik</i> 64, no. 5 (2016): 365–74.'
  ieee: A. Kohlstedt, S. Olma, S. Flottmeier, P. Traphöner, K.-P. Jäker, and A. Trächtler,
    “Control of a hydraulic hexapod for a Hardware-in-the-Loop axle test rig,” <i>at-Automatisierungstechnik</i>,
    vol. 64, no. 5, pp. 365–374, 2016.
  mla: Kohlstedt, Andreas, et al. “Control of a Hydraulic Hexapod for a Hardware-in-the-Loop
    Axle Test Rig.” <i>At-Automatisierungstechnik</i>, vol. 64, no. 5, 2016, pp. 365–74.
  short: A. Kohlstedt, S. Olma, S. Flottmeier, P. Traphöner, K.-P. Jäker, A. Trächtler,
    At-Automatisierungstechnik 64 (2016) 365–374.
date_created: 2021-08-09T06:34:26Z
date_updated: 2022-01-06T06:55:45Z
department:
- _id: '153'
intvolume: '        64'
issue: '5'
language:
- iso: eng
page: 365-374
publication: at-Automatisierungstechnik
status: public
title: Control of a hydraulic hexapod for a Hardware-in-the-Loop axle test rig
type: journal_article
user_id: '24876'
volume: 64
year: '2016'
...
---
_id: '23042'
author:
- first_name: Christopher
  full_name: Lankeit, Christopher
  last_name: Lankeit
- first_name: Viktor
  full_name: Just, Viktor
  last_name: Just
- first_name: Ansgar
  full_name: Trächtler, Ansgar
  id: '552'
  last_name: Trächtler
citation:
  ama: 'Lankeit C, Just V, Trächtler A. Consistency Analysis for Requirements, Functions,
    and System Elements. In: <i>IEEE Systems Conference</i>. Orlando, USA; 2016.'
  apa: Lankeit, C., Just, V., &#38; Trächtler, A. (2016). Consistency Analysis for
    Requirements, Functions, and System Elements. In <i>IEEE Systems Conference</i>.
    Orlando, USA.
  bibtex: '@inproceedings{Lankeit_Just_Trächtler_2016, place={Orlando, USA}, title={Consistency
    Analysis for Requirements, Functions, and System Elements}, booktitle={IEEE Systems
    Conference}, author={Lankeit, Christopher and Just, Viktor and Trächtler, Ansgar},
    year={2016} }'
  chicago: Lankeit, Christopher, Viktor Just, and Ansgar Trächtler. “Consistency Analysis
    for Requirements, Functions, and System Elements.” In <i>IEEE Systems Conference</i>.
    Orlando, USA, 2016.
  ieee: C. Lankeit, V. Just, and A. Trächtler, “Consistency Analysis for Requirements,
    Functions, and System Elements,” in <i>IEEE Systems Conference</i>, 2016.
  mla: Lankeit, Christopher, et al. “Consistency Analysis for Requirements, Functions,
    and System Elements.” <i>IEEE Systems Conference</i>, 2016.
  short: 'C. Lankeit, V. Just, A. Trächtler, in: IEEE Systems Conference, Orlando,
    USA, 2016.'
date_created: 2021-08-09T06:34:27Z
date_updated: 2022-01-06T06:55:45Z
department:
- _id: '153'
language:
- iso: eng
place: Orlando, USA
publication: IEEE Systems Conference
status: public
title: Consistency Analysis for Requirements, Functions, and System Elements
type: conference
user_id: '24876'
year: '2016'
...
---
_id: '23043'
author:
- first_name: Volker
  full_name: Geneiß, Volker
  last_name: Geneiß
- first_name: Christian
  full_name: Hedayat, Christian
  last_name: Hedayat
- first_name: Fabian
  full_name: Bertelsmeier, Fabian
  last_name: Bertelsmeier
- first_name: Christian
  full_name: Henke, Christian
  last_name: Henke
- first_name: Karl-Ernst
  full_name: Vathauer, Karl-Ernst
  last_name: Vathauer
- first_name: Thomas
  full_name: Geßner, Thomas
  last_name: Geßner
citation:
  ama: 'Geneiß V, Hedayat C, Bertelsmeier F, Henke C, Vathauer K-E, Geßner T. Product
    Data and Sensor-based Intelligent Drive Control for Flexible Manufacturing and
    Intralogistic Processes. In: <i>Inproceedings of Smart Systems Integration 2016
    International Conference and Exhibition on Integration of Materials, Devices and
    Systems</i>. ; 2016.'
  apa: Geneiß, V., Hedayat, C., Bertelsmeier, F., Henke, C., Vathauer, K.-E., &#38;
    Geßner, T. (2016). Product Data and Sensor-based Intelligent Drive Control for
    Flexible Manufacturing and Intralogistic Processes. In <i>Inproceedings of Smart
    Systems Integration 2016 International Conference and Exhibition on integration
    of materials, devices and systems</i>.
  bibtex: '@inproceedings{Geneiß_Hedayat_Bertelsmeier_Henke_Vathauer_Geßner_2016,
    title={Product Data and Sensor-based Intelligent Drive Control for Flexible Manufacturing
    and Intralogistic Processes}, booktitle={Inproceedings of Smart Systems Integration
    2016 International Conference and Exhibition on integration of materials, devices
    and systems}, author={Geneiß, Volker and Hedayat, Christian and Bertelsmeier,
    Fabian and Henke, Christian and Vathauer, Karl-Ernst and Geßner, Thomas}, year={2016}
    }'
  chicago: Geneiß, Volker, Christian Hedayat, Fabian Bertelsmeier, Christian Henke,
    Karl-Ernst Vathauer, and Thomas Geßner. “Product Data and Sensor-Based Intelligent
    Drive Control for Flexible Manufacturing and Intralogistic Processes.” In <i>Inproceedings
    of Smart Systems Integration 2016 International Conference and Exhibition on Integration
    of Materials, Devices and Systems</i>, 2016.
  ieee: V. Geneiß, C. Hedayat, F. Bertelsmeier, C. Henke, K.-E. Vathauer, and T. Geßner,
    “Product Data and Sensor-based Intelligent Drive Control for Flexible Manufacturing
    and Intralogistic Processes,” in <i>Inproceedings of Smart Systems Integration
    2016 International Conference and Exhibition on integration of materials, devices
    and systems</i>, 2016.
  mla: Geneiß, Volker, et al. “Product Data and Sensor-Based Intelligent Drive Control
    for Flexible Manufacturing and Intralogistic Processes.” <i>Inproceedings of Smart
    Systems Integration 2016 International Conference and Exhibition on Integration
    of Materials, Devices and Systems</i>, 2016.
  short: 'V. Geneiß, C. Hedayat, F. Bertelsmeier, C. Henke, K.-E. Vathauer, T. Geßner,
    in: Inproceedings of Smart Systems Integration 2016 International Conference and
    Exhibition on Integration of Materials, Devices and Systems, 2016.'
date_created: 2021-08-09T06:34:28Z
date_updated: 2022-01-06T06:55:45Z
department:
- _id: '241'
language:
- iso: eng
publication: Inproceedings of Smart Systems Integration 2016 International Conference
  and Exhibition on integration of materials, devices and systems
status: public
title: Product Data and Sensor-based Intelligent Drive Control for Flexible Manufacturing
  and Intralogistic Processes
type: conference
user_id: '24876'
year: '2016'
...
---
_id: '23044'
author:
- first_name: Jan
  full_name: Michael, Jan
  last_name: Michael
- first_name: Jens
  full_name: Holtkötter, Jens
  last_name: Holtkötter
- first_name: Christian
  full_name: Henke, Christian
  last_name: Henke
- first_name: Ansgar
  full_name: Trächtler, Ansgar
  id: '552'
  last_name: Trächtler
citation:
  ama: 'Michael J, Holtkötter J, Henke C, Trächtler A. Modellbildung und Simulation
    im Kontext des Systems Engineering. In: <i>ASIM-Treffen STS/GMMS 2016</i>. ; 2016:174-179.'
  apa: Michael, J., Holtkötter, J., Henke, C., &#38; Trächtler, A. (2016). Modellbildung
    und Simulation im Kontext des Systems Engineering. In <i>ASIM-Treffen STS/GMMS
    2016</i> (pp. 174–179).
  bibtex: '@inproceedings{Michael_Holtkötter_Henke_Trächtler_2016, title={Modellbildung
    und Simulation im Kontext des Systems Engineering}, booktitle={ASIM-Treffen STS/GMMS
    2016}, author={Michael, Jan and Holtkötter, Jens and Henke, Christian and Trächtler,
    Ansgar}, year={2016}, pages={174–179} }'
  chicago: Michael, Jan, Jens Holtkötter, Christian Henke, and Ansgar Trächtler. “Modellbildung
    Und Simulation Im Kontext Des Systems Engineering.” In <i>ASIM-Treffen STS/GMMS
    2016</i>, 174–79, 2016.
  ieee: J. Michael, J. Holtkötter, C. Henke, and A. Trächtler, “Modellbildung und
    Simulation im Kontext des Systems Engineering,” in <i>ASIM-Treffen STS/GMMS 2016</i>,
    2016, pp. 174–179.
  mla: Michael, Jan, et al. “Modellbildung Und Simulation Im Kontext Des Systems Engineering.”
    <i>ASIM-Treffen STS/GMMS 2016</i>, 2016, pp. 174–79.
  short: 'J. Michael, J. Holtkötter, C. Henke, A. Trächtler, in: ASIM-Treffen STS/GMMS
    2016, 2016, pp. 174–179.'
date_created: 2021-08-09T06:34:30Z
date_updated: 2022-01-06T06:55:45Z
department:
- _id: '153'
- _id: '241'
language:
- iso: eng
page: 174-179
publication: ASIM-Treffen STS/GMMS 2016
status: public
title: Modellbildung und Simulation im Kontext des Systems Engineering
type: conference
user_id: '24876'
year: '2016'
...
---
_id: '23045'
author:
- first_name: Jan
  full_name: Michael, Jan
  last_name: Michael
- first_name: Michael
  full_name: Hillebrand, Michael
  last_name: Hillebrand
- first_name: Benedict
  full_name: Wohlers, Benedict
  last_name: Wohlers
- first_name: Christian
  full_name: Henke, Christian
  last_name: Henke
- first_name: Roman
  full_name: Dumitrescu, Roman
  id: '16190'
  last_name: Dumitrescu
- first_name: Ansgar
  full_name: Trächtler, Ansgar
  id: '552'
  last_name: Trächtler
citation:
  ama: Michael J, Hillebrand M, Wohlers B, Henke C, Dumitrescu R, Trächtler A. Implementing
    intelligent technical systems into smart homes by using model based systems engineering
    and multi-agent systems. <i>Renewable Energy and Power Quality Journal (RE&#38;PQJ)
    16</i>. 2016;1(14):359-364.
  apa: Michael, J., Hillebrand, M., Wohlers, B., Henke, C., Dumitrescu, R., &#38;
    Trächtler, A. (2016). Implementing intelligent technical systems into smart homes
    by using model based systems engineering and multi-agent systems. <i>Renewable
    Energy and Power Quality Journal (RE&#38;PQJ) 16</i>, <i>1</i>(14), 359–364.
  bibtex: '@article{Michael_Hillebrand_Wohlers_Henke_Dumitrescu_Trächtler_2016, title={Implementing
    intelligent technical systems into smart homes by using model based systems engineering
    and multi-agent systems}, volume={1}, number={14}, journal={Renewable Energy and
    Power Quality Journal (RE&#38;PQJ) 16}, author={Michael, Jan and Hillebrand, Michael
    and Wohlers, Benedict and Henke, Christian and Dumitrescu, Roman and Trächtler,
    Ansgar}, year={2016}, pages={359–364} }'
  chicago: 'Michael, Jan, Michael Hillebrand, Benedict Wohlers, Christian Henke, Roman
    Dumitrescu, and Ansgar Trächtler. “Implementing Intelligent Technical Systems
    into Smart Homes by Using Model Based Systems Engineering and Multi-Agent Systems.”
    <i>Renewable Energy and Power Quality Journal (RE&#38;PQJ) 16</i> 1, no. 14 (2016):
    359–64.'
  ieee: J. Michael, M. Hillebrand, B. Wohlers, C. Henke, R. Dumitrescu, and A. Trächtler,
    “Implementing intelligent technical systems into smart homes by using model based
    systems engineering and multi-agent systems,” <i>Renewable Energy and Power Quality
    Journal (RE&#38;PQJ) 16</i>, vol. 1, no. 14, pp. 359–364, 2016.
  mla: Michael, Jan, et al. “Implementing Intelligent Technical Systems into Smart
    Homes by Using Model Based Systems Engineering and Multi-Agent Systems.” <i>Renewable
    Energy and Power Quality Journal (RE&#38;PQJ) 16</i>, vol. 1, no. 14, 2016, pp.
    359–64.
  short: J. Michael, M. Hillebrand, B. Wohlers, C. Henke, R. Dumitrescu, A. Trächtler,
    Renewable Energy and Power Quality Journal (RE&#38;PQJ) 16 1 (2016) 359–364.
date_created: 2021-08-09T06:34:31Z
date_updated: 2022-01-06T06:55:45Z
department:
- _id: '153'
- _id: '241'
intvolume: '         1'
issue: '14'
language:
- iso: eng
page: 359-364
publication: Renewable Energy and Power Quality Journal (RE&PQJ) 16
status: public
title: Implementing intelligent technical systems into smart homes by using model
  based systems engineering and multi-agent systems
type: journal_article
user_id: '24876'
volume: 1
year: '2016'
...
---
_id: '23046'
author:
- first_name: Arathi
  full_name: Pai, Arathi
  last_name: Pai
- first_name: Markus
  full_name: Riepold, Markus
  last_name: Riepold
- first_name: Ansgar
  full_name: Trächtler, Ansgar
  id: '552'
  last_name: Trächtler
citation:
  ama: Pai A, Riepold M, Trächtler A. Precision Control of SMA Actuators with a Real
    Time Model-Based Controller and Extended VSC. <i>IFAC-PapersOnLine</i>. 2016;49(21):66–73.
  apa: Pai, A., Riepold, M., &#38; Trächtler, A. (2016). Precision Control of SMA
    Actuators with a Real Time Model-Based Controller and Extended VSC. <i>IFAC-PapersOnLine</i>,
    <i>49</i>(21), 66–73.
  bibtex: '@article{Pai_Riepold_Trächtler_2016, title={Precision Control of SMA Actuators
    with a Real Time Model-Based Controller and Extended VSC}, volume={49}, number={21},
    journal={IFAC-PapersOnLine}, author={Pai, Arathi and Riepold, Markus and Trächtler,
    Ansgar}, year={2016}, pages={66–73} }'
  chicago: 'Pai, Arathi, Markus Riepold, and Ansgar Trächtler. “Precision Control
    of SMA Actuators with a Real Time Model-Based Controller and Extended VSC.” <i>IFAC-PapersOnLine</i>
    49, no. 21 (2016): 66–73.'
  ieee: A. Pai, M. Riepold, and A. Trächtler, “Precision Control of SMA Actuators
    with a Real Time Model-Based Controller and Extended VSC,” <i>IFAC-PapersOnLine</i>,
    vol. 49, no. 21, pp. 66–73, 2016.
  mla: Pai, Arathi, et al. “Precision Control of SMA Actuators with a Real Time Model-Based
    Controller and Extended VSC.” <i>IFAC-PapersOnLine</i>, vol. 49, no. 21, 2016,
    pp. 66–73.
  short: A. Pai, M. Riepold, A. Trächtler, IFAC-PapersOnLine 49 (2016) 66–73.
date_created: 2021-08-09T06:34:32Z
date_updated: 2022-01-06T06:55:45Z
department:
- _id: '153'
- _id: '241'
intvolume: '        49'
issue: '21'
language:
- iso: eng
page: 66–73
publication: IFAC-PapersOnLine
status: public
title: Precision Control of SMA Actuators with a Real Time Model-Based Controller
  and Extended VSC
type: journal_article
user_id: '24876'
volume: 49
year: '2016'
...
---
_id: '23048'
author:
- first_name: Otto
  full_name: Föllinger, Otto
  last_name: Föllinger
- first_name: Ulrich
  full_name: Konigorski, Ulrich
  last_name: Konigorski
- first_name: Boris
  full_name: Lohmann, Boris
  last_name: Lohmann
- first_name: Günter
  full_name: Roppenecker, Günter
  last_name: Roppenecker
- first_name: Ansgar
  full_name: Trächtler, Ansgar
  id: '552'
  last_name: Trächtler
citation:
  ama: Föllinger O, Konigorski U, Lohmann B, Roppenecker G, Trächtler A. <i>Regelungstechnik
    </i>. VDE-Verlag; 2016.
  apa: Föllinger, O., Konigorski, U., Lohmann, B., Roppenecker, G., &#38; Trächtler,
    A. (2016). <i>Regelungstechnik </i>. VDE-Verlag.
  bibtex: '@book{Föllinger_Konigorski_Lohmann_Roppenecker_Trächtler_2016, title={Regelungstechnik
    }, publisher={VDE-Verlag}, author={Föllinger, Otto and Konigorski, Ulrich and
    Lohmann, Boris and Roppenecker, Günter and Trächtler, Ansgar}, year={2016} }'
  chicago: Föllinger, Otto, Ulrich Konigorski, Boris Lohmann, Günter Roppenecker,
    and Ansgar Trächtler. <i>Regelungstechnik </i>. VDE-Verlag, 2016.
  ieee: O. Föllinger, U. Konigorski, B. Lohmann, G. Roppenecker, and A. Trächtler,
    <i>Regelungstechnik </i>. VDE-Verlag, 2016.
  mla: Föllinger, Otto, et al. <i>Regelungstechnik </i>. VDE-Verlag, 2016.
  short: O. Föllinger, U. Konigorski, B. Lohmann, G. Roppenecker, A. Trächtler, Regelungstechnik
    , VDE-Verlag, 2016.
date_created: 2021-08-09T06:34:34Z
date_updated: 2022-01-06T06:55:45Z
department:
- _id: '153'
language:
- iso: eng
publisher: VDE-Verlag
status: public
title: 'Regelungstechnik '
type: book
user_id: '24876'
year: '2016'
...
---
_id: '23049'
author:
- first_name: Arathi
  full_name: Pai, Arathi
  last_name: Pai
- first_name: Markus
  full_name: Riepold, Markus
  last_name: Riepold
- first_name: Ansgar
  full_name: Trächtler, Ansgar
  id: '552'
  last_name: Trächtler
citation:
  ama: 'Pai A, Riepold M, Trächtler A. A model extended temperature and strain controller
    modulated with PWM for precision position control of shape memory alloy actuators.
    In: <i>IEEE International Conference on Advanced Intelligent Mechatronics AIM</i>.
    ; 2016.'
  apa: Pai, A., Riepold, M., &#38; Trächtler, A. (2016). A model extended temperature
    and strain controller modulated with PWM for precision position control of shape
    memory alloy actuators. In <i>IEEE International Conference on Advanced Intelligent
    Mechatronics AIM</i>.
  bibtex: '@inproceedings{Pai_Riepold_Trächtler_2016, title={A model extended temperature
    and strain controller modulated with PWM for precision position control of shape
    memory alloy actuators}, booktitle={IEEE International Conference on Advanced
    Intelligent Mechatronics AIM}, author={Pai, Arathi and Riepold, Markus and Trächtler,
    Ansgar}, year={2016} }'
  chicago: Pai, Arathi, Markus Riepold, and Ansgar Trächtler. “A Model Extended Temperature
    and Strain Controller Modulated with PWM for Precision Position Control of Shape
    Memory Alloy Actuators.” In <i>IEEE International Conference on Advanced Intelligent
    Mechatronics AIM</i>, 2016.
  ieee: A. Pai, M. Riepold, and A. Trächtler, “A model extended temperature and strain
    controller modulated with PWM for precision position control of shape memory alloy
    actuators,” in <i>IEEE International Conference on Advanced Intelligent Mechatronics
    AIM</i>, 2016.
  mla: Pai, Arathi, et al. “A Model Extended Temperature and Strain Controller Modulated
    with PWM for Precision Position Control of Shape Memory Alloy Actuators.” <i>IEEE
    International Conference on Advanced Intelligent Mechatronics AIM</i>, 2016.
  short: 'A. Pai, M. Riepold, A. Trächtler, in: IEEE International Conference on Advanced
    Intelligent Mechatronics AIM, 2016.'
date_created: 2021-08-09T06:34:35Z
date_updated: 2022-01-06T06:55:45Z
department:
- _id: '153'
- _id: '241'
language:
- iso: eng
publication: IEEE International Conference on Advanced Intelligent Mechatronics AIM
status: public
title: A model extended temperature and strain controller modulated with PWM for precision
  position control of shape memory alloy actuators
type: conference
user_id: '24876'
year: '2016'
...
---
_id: '23050'
author:
- first_name: Daniel
  full_name: Kruse, Daniel
  last_name: Kruse
- first_name: Andreas P.
  full_name: Warkentin, Andreas P.
  last_name: Warkentin
- first_name: Martin
  full_name: Krüger, Martin
  last_name: Krüger
- first_name: Ansgar
  full_name: Trächtler, Ansgar
  id: '552'
  last_name: Trächtler
- first_name: Sascha
  full_name: Rackow, Sascha
  last_name: Rackow
citation:
  ama: 'Kruse D, Warkentin AP, Krüger M, Trächtler A, Rackow S. Multidomänenmodell
    zur Optimierung der Hydraulik eines Raupenlaufwerks für Landmaschinen. In: <i>Proc.
    4. Internationales Commercial Vehicle Technology Symposium</i>. ; 2016.'
  apa: Kruse, D., Warkentin, A. P., Krüger, M., Trächtler, A., &#38; Rackow, S. (2016).
    Multidomänenmodell zur Optimierung der Hydraulik eines Raupenlaufwerks für Landmaschinen.
    In <i>Proc. 4. Internationales Commercial Vehicle Technology Symposium</i>.
  bibtex: '@inproceedings{Kruse_Warkentin_Krüger_Trächtler_Rackow_2016, title={Multidomänenmodell
    zur Optimierung der Hydraulik eines Raupenlaufwerks für Landmaschinen}, booktitle={Proc.
    4. Internationales Commercial Vehicle Technology Symposium}, author={Kruse, Daniel
    and Warkentin, Andreas P. and Krüger, Martin and Trächtler, Ansgar and Rackow,
    Sascha}, year={2016} }'
  chicago: Kruse, Daniel, Andreas P. Warkentin, Martin Krüger, Ansgar Trächtler, and
    Sascha Rackow. “Multidomänenmodell Zur Optimierung Der Hydraulik Eines Raupenlaufwerks
    Für Landmaschinen.” In <i>Proc. 4. Internationales Commercial Vehicle Technology
    Symposium</i>, 2016.
  ieee: D. Kruse, A. P. Warkentin, M. Krüger, A. Trächtler, and S. Rackow, “Multidomänenmodell
    zur Optimierung der Hydraulik eines Raupenlaufwerks für Landmaschinen,” in <i>Proc.
    4. Internationales Commercial Vehicle Technology Symposium</i>, 2016.
  mla: Kruse, Daniel, et al. “Multidomänenmodell Zur Optimierung Der Hydraulik Eines
    Raupenlaufwerks Für Landmaschinen.” <i>Proc. 4. Internationales Commercial Vehicle
    Technology Symposium</i>, 2016.
  short: 'D. Kruse, A.P. Warkentin, M. Krüger, A. Trächtler, S. Rackow, in: Proc.
    4. Internationales Commercial Vehicle Technology Symposium, 2016.'
date_created: 2021-08-09T06:34:37Z
date_updated: 2022-01-06T06:55:45Z
department:
- _id: '153'
- _id: '241'
language:
- iso: eng
publication: Proc. 4. Internationales Commercial Vehicle Technology Symposium
status: public
title: Multidomänenmodell zur Optimierung der Hydraulik eines Raupenlaufwerks für
  Landmaschinen
type: conference
user_id: '24876'
year: '2016'
...
---
_id: '23051'
author:
- first_name: Chairit
  full_name: Wuthishuwong, Chairit
  last_name: Wuthishuwong
- first_name: Ansgar
  full_name: Trächtler, Ansgar
  id: '552'
  last_name: Trächtler
citation:
  ama: Wuthishuwong C, Trächtler A. Consensus-based local information coordination
    for the networked control of the autonomous intersection management. <i>Complex
    &#38; Intelligent Systems</i>. 2016;doi:10.1007/s40747-016-0032-6:1-16.
  apa: Wuthishuwong, C., &#38; Trächtler, A. (2016). Consensus-based local information
    coordination for the networked control of the autonomous intersection management.
    <i>Complex &#38; Intelligent Systems</i>, <i>doi:10.1007/s40747</i>-<i>016</i>-<i>0032</i>-<i>6</i>,
    1–16.
  bibtex: '@article{Wuthishuwong_Trächtler_2016, title={Consensus-based local information
    coordination for the networked control of the autonomous intersection management},
    volume={doi:10.1007/s40747-016-0032-6}, journal={Complex &#38; Intelligent Systems},
    author={Wuthishuwong, Chairit and Trächtler, Ansgar}, year={2016}, pages={1–16}
    }'
  chicago: 'Wuthishuwong, Chairit, and Ansgar Trächtler. “Consensus-Based Local Information
    Coordination for the Networked Control of the Autonomous Intersection Management.”
    <i>Complex &#38; Intelligent Systems</i> doi:10.1007/s40747-016-0032-6 (2016):
    1–16.'
  ieee: C. Wuthishuwong and A. Trächtler, “Consensus-based local information coordination
    for the networked control of the autonomous intersection management,” <i>Complex
    &#38; Intelligent Systems</i>, vol. doi:10.1007/s40747-016-0032-6, pp. 1–16, 2016.
  mla: Wuthishuwong, Chairit, and Ansgar Trächtler. “Consensus-Based Local Information
    Coordination for the Networked Control of the Autonomous Intersection Management.”
    <i>Complex &#38; Intelligent Systems</i>, vol. doi:10.1007/s40747-016-0032-6,
    2016, pp. 1–16.
  short: C. Wuthishuwong, A. Trächtler, Complex &#38; Intelligent Systems doi:10.1007/s40747-016-0032-6
    (2016) 1–16.
date_created: 2021-08-09T06:34:38Z
date_updated: 2022-01-06T06:55:45Z
department:
- _id: '153'
language:
- iso: eng
page: 1-16
publication: Complex & Intelligent Systems
status: public
title: Consensus-based local information coordination for the networked control of
  the autonomous intersection management
type: journal_article
user_id: '24876'
volume: doi:10.1007/s40747-016-0032-6
year: '2016'
...
---
_id: '23052'
author:
- first_name: Zeeshan
  full_name: Shareef, Zeeshan
  last_name: Shareef
- first_name: Ansgar
  full_name: Trächtler, Ansgar
  id: '552'
  last_name: Trächtler
citation:
  ama: Shareef Z, Trächtler A. Simultaneous path planning and trajectory optimization
    for robotic manipulators using discrete mechanics and optimal control. <i>Robotica</i>.
    2016;34(06):1322-1334.
  apa: Shareef, Z., &#38; Trächtler, A. (2016). Simultaneous path planning and trajectory
    optimization for robotic manipulators using discrete mechanics and optimal control.
    <i>Robotica</i>, <i>34</i>(06), 1322–1334.
  bibtex: '@article{Shareef_Trächtler_2016, title={Simultaneous path planning and
    trajectory optimization for robotic manipulators using discrete mechanics and
    optimal control}, volume={34}, number={06}, journal={Robotica}, author={Shareef,
    Zeeshan and Trächtler, Ansgar}, year={2016}, pages={1322–1334} }'
  chicago: 'Shareef, Zeeshan, and Ansgar Trächtler. “Simultaneous Path Planning and
    Trajectory Optimization for Robotic Manipulators Using Discrete Mechanics and
    Optimal Control.” <i>Robotica</i> 34, no. 06 (2016): 1322–34.'
  ieee: Z. Shareef and A. Trächtler, “Simultaneous path planning and trajectory optimization
    for robotic manipulators using discrete mechanics and optimal control,” <i>Robotica</i>,
    vol. 34, no. 06, pp. 1322–1334, 2016.
  mla: Shareef, Zeeshan, and Ansgar Trächtler. “Simultaneous Path Planning and Trajectory
    Optimization for Robotic Manipulators Using Discrete Mechanics and Optimal Control.”
    <i>Robotica</i>, vol. 34, no. 06, 2016, pp. 1322–34.
  short: Z. Shareef, A. Trächtler, Robotica 34 (2016) 1322–1334.
date_created: 2021-08-09T06:34:39Z
date_updated: 2022-01-06T06:55:45Z
department:
- _id: '153'
intvolume: '        34'
issue: '06'
language:
- iso: eng
page: 1322 - 1334
publication: Robotica
status: public
title: Simultaneous path planning and trajectory optimization for robotic manipulators
  using discrete mechanics and optimal control
type: journal_article
user_id: '24876'
volume: 34
year: '2016'
...
---
_id: '23053'
author:
- first_name: Johannes
  full_name: Renninger, Johannes
  last_name: Renninger
- first_name: Ansgar
  full_name: Trächtler, Ansgar
  id: '552'
  last_name: Trächtler
citation:
  ama: Renninger J, Trächtler A. Verbesserte Schätzung von Fahrdynamikgrößen durch
    Modellierung der Fahrwerks-und Lenkkinematik. <i>at-Automatisierungstechnik</i>.
    2016;64(5):346-354.
  apa: Renninger, J., &#38; Trächtler, A. (2016). Verbesserte Schätzung von Fahrdynamikgrößen
    durch Modellierung der Fahrwerks-und Lenkkinematik. <i>At-Automatisierungstechnik</i>,
    <i>64</i>(5), 346–354.
  bibtex: '@article{Renninger_Trächtler_2016, title={Verbesserte Schätzung von Fahrdynamikgrößen
    durch Modellierung der Fahrwerks-und Lenkkinematik}, volume={64}, number={5},
    journal={at-Automatisierungstechnik}, author={Renninger, Johannes and Trächtler,
    Ansgar}, year={2016}, pages={346–354} }'
  chicago: 'Renninger, Johannes, and Ansgar Trächtler. “Verbesserte Schätzung von
    Fahrdynamikgrößen Durch Modellierung Der Fahrwerks-Und Lenkkinematik.” <i>At-Automatisierungstechnik</i>
    64, no. 5 (2016): 346–54.'
  ieee: J. Renninger and A. Trächtler, “Verbesserte Schätzung von Fahrdynamikgrößen
    durch Modellierung der Fahrwerks-und Lenkkinematik,” <i>at-Automatisierungstechnik</i>,
    vol. 64, no. 5, pp. 346–354, 2016.
  mla: Renninger, Johannes, and Ansgar Trächtler. “Verbesserte Schätzung von Fahrdynamikgrößen
    Durch Modellierung Der Fahrwerks-Und Lenkkinematik.” <i>At-Automatisierungstechnik</i>,
    vol. 64, no. 5, 2016, pp. 346–54.
  short: J. Renninger, A. Trächtler, At-Automatisierungstechnik 64 (2016) 346–354.
date_created: 2021-08-09T06:34:40Z
date_updated: 2022-01-06T06:55:45Z
department:
- _id: '153'
intvolume: '        64'
issue: '5'
language:
- iso: eng
page: 346-354
publication: at-Automatisierungstechnik
status: public
title: Verbesserte Schätzung von Fahrdynamikgrößen durch Modellierung der Fahrwerks-und
  Lenkkinematik
type: journal_article
user_id: '24876'
volume: 64
year: '2016'
...
---
_id: '23054'
author:
- first_name: Marcos
  full_name: Bockholt, Marcos
  last_name: Bockholt
- first_name: Michael
  full_name: Katter, Michael
  last_name: Katter
- first_name: Georg
  full_name: Pohl, Georg
  last_name: Pohl
- first_name: Jan
  full_name: Michael, Jan
  last_name: Michael
- first_name: Thomas
  full_name: Alpögger, Thomas
  last_name: Alpögger
citation:
  ama: 'Bockholt M, Katter M, Pohl G, Michael J, Alpögger T. A Tool Chain for Model-Based
    Development of Heat Pump Dryers. In: <i>3rd International Conference on System-Integrated
    Intelligence: New Challenges for Product and Production Engineering</i>. ; 2016.'
  apa: 'Bockholt, M., Katter, M., Pohl, G., Michael, J., &#38; Alpögger, T. (2016).
    A Tool Chain for Model-Based Development of Heat Pump Dryers. In <i>3rd International
    Conference on System-integrated Intelligence: New Challenges for Product and Production
    Engineering</i>.'
  bibtex: '@inproceedings{Bockholt_Katter_Pohl_Michael_Alpögger_2016, title={A Tool
    Chain for Model-Based Development of Heat Pump Dryers}, booktitle={3rd International
    Conference on System-integrated Intelligence: New Challenges for Product and Production
    Engineering}, author={Bockholt, Marcos and Katter, Michael and Pohl, Georg and
    Michael, Jan and Alpögger, Thomas}, year={2016} }'
  chicago: 'Bockholt, Marcos, Michael Katter, Georg Pohl, Jan Michael, and Thomas
    Alpögger. “A Tool Chain for Model-Based Development of Heat Pump Dryers.” In <i>3rd
    International Conference on System-Integrated Intelligence: New Challenges for
    Product and Production Engineering</i>, 2016.'
  ieee: 'M. Bockholt, M. Katter, G. Pohl, J. Michael, and T. Alpögger, “A Tool Chain
    for Model-Based Development of Heat Pump Dryers,” in <i>3rd International Conference
    on System-integrated Intelligence: New Challenges for Product and Production Engineering</i>,
    2016.'
  mla: 'Bockholt, Marcos, et al. “A Tool Chain for Model-Based Development of Heat
    Pump Dryers.” <i>3rd International Conference on System-Integrated Intelligence:
    New Challenges for Product and Production Engineering</i>, 2016.'
  short: 'M. Bockholt, M. Katter, G. Pohl, J. Michael, T. Alpögger, in: 3rd International
    Conference on System-Integrated Intelligence: New Challenges for Product and Production
    Engineering, 2016.'
date_created: 2021-08-09T06:34:41Z
date_updated: 2022-01-06T06:55:45Z
department:
- _id: '241'
language:
- iso: eng
publication: '3rd International Conference on System-integrated Intelligence: New
  Challenges for Product and Production Engineering'
status: public
title: A Tool Chain for Model-Based Development of Heat Pump Dryers
type: conference
user_id: '24876'
year: '2016'
...
---
_id: '21687'
abstract:
- lang: eng
  text: 'The spare part industry in aerospace is highly demanding. For conventional
    manufacturing technologies it is difficult to meet these requirements. In contrast
    to that, the design freedom of Additive Manufacturing enables the production of
    complex and lightweight parts. The lack of experience with this technology hampers
    the decision where Additive Manufacturing can be economically applied. The cost
    drivers have to be newly evaluated and holistically investigated. Supply chain
    advantages have to be considered during the decision process, too. Therefore,
    aerospace characteristics are analyzed within the paper and a methodology based
    on Multi Attribute Decision Making (MADM) is introduced. To do so, the cost appraisal
    for Additive Manufacturing has to be detailed. Additionally, changes in the supply
    chain have to be identified and quantified. Quality criteria have to be taken
    into account as well. In the end it is shown how these influence factors can be
    combined to create a decision support. '
author:
- first_name: G.
  full_name: Deppe, G.
  last_name: Deppe
- first_name: R.
  full_name: Koch, R.
  last_name: Koch
citation:
  ama: 'Deppe G, Koch R. Supporting the Decision Process for applying Additive Manufacturing
    in the MRO Aerospace Business by MADM. In: <i>27th Annual International Solid
    Freeform Fabrication Symposium </i>. Vol 27. ; 2016:81-92. doi:<a href="http://utw10945.utweb.utexas.edu/sites/default/files/2016/006-Deppe.pdf">http://utw10945.utweb.utexas.edu/sites/default/files/2016/006-Deppe.pdf</a>'
  apa: Deppe, G., &#38; Koch, R. (2016). Supporting the Decision Process for applying
    Additive Manufacturing in the MRO Aerospace Business by MADM. In <i>27th Annual
    International Solid Freeform Fabrication Symposium </i> (Vol. 27, pp. 81–92).
    <a href="http://utw10945.utweb.utexas.edu/sites/default/files/2016/006-Deppe.pdf">http://utw10945.utweb.utexas.edu/sites/default/files/2016/006-Deppe.pdf</a>
  bibtex: '@inproceedings{Deppe_Koch_2016, title={Supporting the Decision Process
    for applying Additive Manufacturing in the MRO Aerospace Business by MADM}, volume={27},
    DOI={<a href="http://utw10945.utweb.utexas.edu/sites/default/files/2016/006-Deppe.pdf">http://utw10945.utweb.utexas.edu/sites/default/files/2016/006-Deppe.pdf</a>},
    booktitle={27th Annual International Solid Freeform Fabrication Symposium }, author={Deppe,
    G. and Koch, R.}, year={2016}, pages={81–92} }'
  chicago: Deppe, G., and R. Koch. “Supporting the Decision Process for Applying Additive
    Manufacturing in the MRO Aerospace Business by MADM.” In <i>27th Annual International
    Solid Freeform Fabrication Symposium </i>, 27:81–92, 2016. <a href="http://utw10945.utweb.utexas.edu/sites/default/files/2016/006-Deppe.pdf">http://utw10945.utweb.utexas.edu/sites/default/files/2016/006-Deppe.pdf</a>.
  ieee: G. Deppe and R. Koch, “Supporting the Decision Process for applying Additive
    Manufacturing in the MRO Aerospace Business by MADM,” in <i>27th Annual International
    Solid Freeform Fabrication Symposium </i>, 2016, vol. 27, pp. 81–92.
  mla: Deppe, G., and R. Koch. “Supporting the Decision Process for Applying Additive
    Manufacturing in the MRO Aerospace Business by MADM.” <i>27th Annual International
    Solid Freeform Fabrication Symposium </i>, vol. 27, 2016, pp. 81–92, doi:<a href="http://utw10945.utweb.utexas.edu/sites/default/files/2016/006-Deppe.pdf">http://utw10945.utweb.utexas.edu/sites/default/files/2016/006-Deppe.pdf</a>.
  short: 'G. Deppe, R. Koch, in: 27th Annual International Solid Freeform Fabrication
    Symposium , 2016, pp. 81–92.'
date_created: 2021-04-21T07:22:29Z
date_updated: 2022-01-06T06:55:10Z
department:
- _id: '144'
- _id: '219'
- _id: '624'
doi: http://utw10945.utweb.utexas.edu/sites/default/files/2016/006-Deppe.pdf
intvolume: '        27'
language:
- iso: eng
page: 81-92
publication: '27th Annual International Solid Freeform Fabrication Symposium '
status: public
title: Supporting the Decision Process for applying Additive Manufacturing in the
  MRO Aerospace Business by MADM
type: conference
user_id: '55833'
volume: 27
year: '2016'
...
---
_id: '21688'
abstract:
- lang: eng
  text: Additive Manufacturing offers a great potential for the optimization of products.
    Therefore different approaches are feasible to exploit these potentials for elaborating
    optimal solutions. For example these include optimization of weight or stiffness
    of structural components as well as the integration of functions and other entities
    of assemblies. Note, however, that additive manufacturing processes have process
    specific limitations. Products, components and assemblies, as well as procedures
    for the design and production preparation must be optimized with regard to a successful
    additive manufacturing. The use of already known tools for the optimization and
    design needs to be reconsidered and adapted to theadditive manufacturing. This
    also includes the production planning with component orientation in build chamber
    as well as a necessary quality management system. This paper shows several ways
    for product optimization with additive manufacturing, often based on topology
    optimization, and procedures for information gathering, decision making and shape
    determination for part optimization for Additive Manufacturing.
author:
- first_name: T.
  full_name: Reiher, T.
  last_name: Reiher
- first_name: R.
  full_name: Koch, R.
  last_name: Koch
citation:
  ama: 'Reiher T, Koch R. Product optimization with and for Additive Manufacturing.
    In: <i>27th Annual International Solid Freeform Fabrication Symposium </i>. Vol
    27. ; 2016:2236-2249. doi:<a href="http://utw10945.utweb.utexas.edu/sites/default/files/2016/179-Reiher.pdf">http://utw10945.utweb.utexas.edu/sites/default/files/2016/179-Reiher.pdf</a>'
  apa: Reiher, T., &#38; Koch, R. (2016). Product optimization with and for Additive
    Manufacturing. In <i>27th Annual International Solid Freeform Fabrication Symposium
    </i> (Vol. 27, pp. 2236–2249). <a href="http://utw10945.utweb.utexas.edu/sites/default/files/2016/179-Reiher.pdf">http://utw10945.utweb.utexas.edu/sites/default/files/2016/179-Reiher.pdf</a>
  bibtex: '@inproceedings{Reiher_Koch_2016, title={Product optimization with and for
    Additive Manufacturing}, volume={27}, DOI={<a href="http://utw10945.utweb.utexas.edu/sites/default/files/2016/179-Reiher.pdf">http://utw10945.utweb.utexas.edu/sites/default/files/2016/179-Reiher.pdf</a>},
    booktitle={27th Annual International Solid Freeform Fabrication Symposium }, author={Reiher,
    T. and Koch, R.}, year={2016}, pages={2236–2249} }'
  chicago: Reiher, T., and R. Koch. “Product Optimization with and for Additive Manufacturing.”
    In <i>27th Annual International Solid Freeform Fabrication Symposium </i>, 27:2236–49,
    2016. <a href="http://utw10945.utweb.utexas.edu/sites/default/files/2016/179-Reiher.pdf">http://utw10945.utweb.utexas.edu/sites/default/files/2016/179-Reiher.pdf</a>.
  ieee: T. Reiher and R. Koch, “Product optimization with and for Additive Manufacturing,”
    in <i>27th Annual International Solid Freeform Fabrication Symposium </i>, 2016,
    vol. 27, pp. 2236–2249.
  mla: Reiher, T., and R. Koch. “Product Optimization with and for Additive Manufacturing.”
    <i>27th Annual International Solid Freeform Fabrication Symposium </i>, vol. 27,
    2016, pp. 2236–49, doi:<a href="http://utw10945.utweb.utexas.edu/sites/default/files/2016/179-Reiher.pdf">http://utw10945.utweb.utexas.edu/sites/default/files/2016/179-Reiher.pdf</a>.
  short: 'T. Reiher, R. Koch, in: 27th Annual International Solid Freeform Fabrication
    Symposium , 2016, pp. 2236–2249.'
date_created: 2021-04-21T07:32:02Z
date_updated: 2022-01-06T06:55:10Z
department:
- _id: '144'
- _id: '219'
- _id: '624'
doi: http://utw10945.utweb.utexas.edu/sites/default/files/2016/179-Reiher.pdf
intvolume: '        27'
language:
- iso: eng
page: 2236-2249
publication: '27th Annual International Solid Freeform Fabrication Symposium '
status: public
title: Product optimization with and for Additive Manufacturing
type: conference
user_id: '55833'
volume: 27
year: '2016'
...
---
_id: '21689'
abstract:
- lang: eng
  text: Additive manufacturing offers advantages for the production of a final product.
    Nowadays still many companies have not integrated this new technology into their
    product development processes (PDP). This paper will discuss additive manufacturing
    with regards to the current available PDP's while setting a focus on the economic
    aspects of the integration. Based on a sample part several tools will be discusses
    which may be uses in the different phases of product development. These tools
    aim on the simplification of integrating additive manufacturing technologies into
    existing PDP's. Included are methods for early and accurate cost estimation as
    well as product selection processes, best practice templates for creating knowledge
    and process awareness.
author:
- first_name: C.
  full_name: Lindemann, C.
  last_name: Lindemann
- first_name: R.
  full_name: Koch, R.
  last_name: Koch
citation:
  ama: 'Lindemann C, Koch R. Cost Efficient Design and Planning for Additive Manufacturing
    Technologies. In: <i>27th Annual International Solid Freeform Fabrication Symposium
    </i>. Vol 27. ; 2016:93-112. doi:<a href="http://utw10945.utweb.utexas.edu/sites/default/files/2016/007-Lindemann.pdf">http://utw10945.utweb.utexas.edu/sites/default/files/2016/007-Lindemann.pdf</a>'
  apa: Lindemann, C., &#38; Koch, R. (2016). Cost Efficient Design and Planning for
    Additive Manufacturing Technologies. In <i>27th Annual International Solid Freeform
    Fabrication Symposium </i> (Vol. 27, pp. 93–112). <a href="http://utw10945.utweb.utexas.edu/sites/default/files/2016/007-Lindemann.pdf">http://utw10945.utweb.utexas.edu/sites/default/files/2016/007-Lindemann.pdf</a>
  bibtex: '@inproceedings{Lindemann_Koch_2016, title={Cost Efficient Design and Planning
    for Additive Manufacturing Technologies}, volume={27}, DOI={<a href="http://utw10945.utweb.utexas.edu/sites/default/files/2016/007-Lindemann.pdf">http://utw10945.utweb.utexas.edu/sites/default/files/2016/007-Lindemann.pdf</a>},
    booktitle={27th Annual International Solid Freeform Fabrication Symposium }, author={Lindemann,
    C. and Koch, R.}, year={2016}, pages={93–112} }'
  chicago: Lindemann, C., and R. Koch. “Cost Efficient Design and Planning for Additive
    Manufacturing Technologies.” In <i>27th Annual International Solid Freeform Fabrication
    Symposium </i>, 27:93–112, 2016. <a href="http://utw10945.utweb.utexas.edu/sites/default/files/2016/007-Lindemann.pdf">http://utw10945.utweb.utexas.edu/sites/default/files/2016/007-Lindemann.pdf</a>.
  ieee: C. Lindemann and R. Koch, “Cost Efficient Design and Planning for Additive
    Manufacturing Technologies,” in <i>27th Annual International Solid Freeform Fabrication
    Symposium </i>, 2016, vol. 27, pp. 93–112.
  mla: Lindemann, C., and R. Koch. “Cost Efficient Design and Planning for Additive
    Manufacturing Technologies.” <i>27th Annual International Solid Freeform Fabrication
    Symposium </i>, vol. 27, 2016, pp. 93–112, doi:<a href="http://utw10945.utweb.utexas.edu/sites/default/files/2016/007-Lindemann.pdf">http://utw10945.utweb.utexas.edu/sites/default/files/2016/007-Lindemann.pdf</a>.
  short: 'C. Lindemann, R. Koch, in: 27th Annual International Solid Freeform Fabrication
    Symposium , 2016, pp. 93–112.'
date_created: 2021-04-21T07:32:03Z
date_updated: 2022-01-06T06:55:10Z
department:
- _id: '144'
- _id: '219'
- _id: '624'
doi: http://utw10945.utweb.utexas.edu/sites/default/files/2016/007-Lindemann.pdf
intvolume: '        27'
language:
- iso: eng
page: 93-112
publication: '27th Annual International Solid Freeform Fabrication Symposium '
status: public
title: Cost Efficient Design and Planning for Additive Manufacturing Technologies
type: conference
user_id: '55833'
volume: 27
year: '2016'
...
---
_id: '21698'
abstract:
- lang: eng
  text: 'Additive Manufacturing (AM) has been growing rapidly with doubledigit growth
    rates during the last years and a rising trend towards end products. The further
    development of the technology highly depends on some critical success factors.
    For the future, it is vital to know which innovations will be necessary to satisfy
    the needs of industry. The impulsive forces will be those branches whose special
    characteristics are met by AM. Within the DMRC study “Thinking ahead the Future
    of Additive Manufacturing – Analysis of Promising Industries” (Gausemeier 2011),
    especially aircraft production, automotive production and the electronics industry
    have been identified as very promising to profit from the use of AM. Experts have
    selected these branches by assessing the prospective attractiveness of current
    application fields. Those branches are characterized by low quantities, complex
    part designs, lightweight design and/or high unit prices. For the aerospace industry,
    all four elements are of high relevance, which is why it has been a pioneer in
    applying and developing AM technology since the early beginning (Gausemeier 2011
    and 2012). '
author:
- first_name: C.
  full_name: Lindemann, C.
  last_name: Lindemann
- first_name: G.
  full_name: Deppe, G.
  last_name: Deppe
- first_name: R.
  full_name: Koch, R.
  last_name: Koch
citation:
  ama: Lindemann C, Deppe G, Koch R. <i>Scenario Based Outlook of Additive Manufacturing
    Applications for the Aerospace Market</i>. Metropolis Verlag; 2016.
  apa: Lindemann, C., Deppe, G., &#38; Koch, R. (2016). <i>Scenario Based Outlook
    of Additive Manufacturing Applications for the Aerospace Market</i>. Metropolis
    Verlag.
  bibtex: '@book{Lindemann_Deppe_Koch_2016, title={Scenario Based Outlook of Additive
    Manufacturing Applications for the Aerospace Market}, publisher={Metropolis Verlag},
    author={Lindemann, C. and Deppe, G. and Koch, R.}, year={2016} }'
  chicago: Lindemann, C., G. Deppe, and R. Koch. <i>Scenario Based Outlook of Additive
    Manufacturing Applications for the Aerospace Market</i>. Metropolis Verlag, 2016.
  ieee: C. Lindemann, G. Deppe, and R. Koch, <i>Scenario Based Outlook of Additive
    Manufacturing Applications for the Aerospace Market</i>. Metropolis Verlag, 2016.
  mla: Lindemann, C., et al. <i>Scenario Based Outlook of Additive Manufacturing Applications
    for the Aerospace Market</i>. Metropolis Verlag, 2016.
  short: C. Lindemann, G. Deppe, R. Koch, Scenario Based Outlook of Additive Manufacturing
    Applications for the Aerospace Market, Metropolis Verlag, 2016.
date_created: 2021-04-21T07:40:31Z
date_updated: 2022-01-06T06:55:10Z
department:
- _id: '144'
- _id: '219'
- _id: '624'
language:
- iso: eng
page: '283'
publication_identifier:
  isbn:
  - 978-3-7316-1156-1
publisher: Metropolis Verlag
status: public
title: Scenario Based Outlook of Additive Manufacturing Applications for the Aerospace
  Market
type: book
user_id: '55833'
year: '2016'
...
---
_id: '21699'
abstract:
- lang: eng
  text: 'Additive Manufacturing (AM) is often deemed to be a driver for product piracy
    in public media. The reasons for this are mainly seen in the fact that it provides
    a possibility to easily copy three-dimensional objects when used in combination
    with scanning technologies. This contribution will not focus on the knowledge
    and skills needed to master AM technology but on its potential contribution to
    prevent product piracy and reverse engineering. The reverse engineering process
    will be analyzed to understand the practice of imitators and to transfer the characteristics
    of AM into specific measures. Finally a five-step methodology is presented which
    can be used as a guideline to implement protection measures in products to be
    (re-) developed. This guideline is supposed to be used by industrial companies
    since an expert survey has identified them as being very likely to profit from
    the use of AM (Echterhoff et al. 2011). '
author:
- first_name: U.
  full_name: Jahnke, U.
  last_name: Jahnke
- first_name: R.
  full_name: Koch, R.
  last_name: Koch
citation:
  ama: Jahnke U, Koch R. <i>Prevention of Product Piracy - Potentials of Additive
    Manufacturing</i>. Metropolis Verlag; 2016.
  apa: Jahnke, U., &#38; Koch, R. (2016). <i>Prevention of Product Piracy - Potentials
    of Additive Manufacturing</i>. Metropolis Verlag.
  bibtex: '@book{Jahnke_Koch_2016, title={Prevention of Product Piracy - Potentials
    of Additive Manufacturing}, publisher={Metropolis Verlag}, author={Jahnke, U.
    and Koch, R.}, year={2016} }'
  chicago: Jahnke, U., and R. Koch. <i>Prevention of Product Piracy - Potentials of
    Additive Manufacturing</i>. Metropolis Verlag, 2016.
  ieee: U. Jahnke and R. Koch, <i>Prevention of Product Piracy - Potentials of Additive
    Manufacturing</i>. Metropolis Verlag, 2016.
  mla: Jahnke, U., and R. Koch. <i>Prevention of Product Piracy - Potentials of Additive
    Manufacturing</i>. Metropolis Verlag, 2016.
  short: U. Jahnke, R. Koch, Prevention of Product Piracy - Potentials of Additive
    Manufacturing, Metropolis Verlag, 2016.
date_created: 2021-04-21T07:40:32Z
date_updated: 2022-01-06T06:55:10Z
department:
- _id: '144'
- _id: '219'
- _id: '624'
language:
- iso: eng
page: '283'
publication_identifier:
  isbn:
  - 978-3-7316-1156-1
publisher: Metropolis Verlag
status: public
title: Prevention of Product Piracy - Potentials of Additive Manufacturing
type: book
user_id: '55833'
year: '2016'
...
---
_id: '217'
abstract:
- lang: eng
  text: Today, cloud vendors host third party black-box services, whose developers
    usually provide only textual descriptions or purely syntactical interface specifications.
    Cloud vendors that give substantial support to other third party developers to
    integrate hosted services into new software solutions would have a unique selling
    feature over their competitors. However, to reliably determine if a service is
    reusable, comprehensive service specifications are needed. Characteristic for
    comprehensive in contrast to syntactical specifications are the formalization
    of ontological and behavioral semantics, homogeneity according to a global ontology,
    and a service grounding that links the abstract service description and its technical
    realization. Homogeneous, semantical specifications enable to reliably identify
    reusable services, whereas the service grounding is needed for the technical service
    integration. In general, comprehensive specifications are not availableand have
    to be derived. Existing automatized approaches are restricted to certain characteristics
    of comprehensiveness. In my PhD, I consider an automatized approach to derive
    fully-fledged comprehensive specifications for black-box services. Ontological
    semantics are derived from syntactical interface specifications. Behavioral semantics
    are mined from call logs that cloud vendors create to monitor the hosted services.
    The specifications are harmonized over a global ontology. The service grounding
    is established using traceability information. The approach enables third party
    developers to compose services into complex systems and creates new sales channels
    for cloud and service providers.
author:
- first_name: Simon
  full_name: Schwichtenberg, Simon
  id: '13235'
  last_name: Schwichtenberg
citation:
  ama: 'Schwichtenberg S. Automatized Derivation of Comprehensive Specifications for
    Black-box Services. In: <i>Proceedings of the 38th International Conference on
    Software Engineering Companion (ICSE)</i>. ; 2016:815-818. doi:<a href="https://doi.org/10.1145/2889160.2889271">10.1145/2889160.2889271</a>'
  apa: Schwichtenberg, S. (2016). Automatized Derivation of Comprehensive Specifications
    for Black-box Services. In <i>Proceedings of the 38th International Conference
    on Software Engineering Companion (ICSE)</i> (pp. 815–818). <a href="https://doi.org/10.1145/2889160.2889271">https://doi.org/10.1145/2889160.2889271</a>
  bibtex: '@inproceedings{Schwichtenberg_2016, title={Automatized Derivation of Comprehensive
    Specifications for Black-box Services}, DOI={<a href="https://doi.org/10.1145/2889160.2889271">10.1145/2889160.2889271</a>},
    booktitle={Proceedings of the 38th International Conference on Software Engineering
    Companion (ICSE)}, author={Schwichtenberg, Simon}, year={2016}, pages={815–818}
    }'
  chicago: Schwichtenberg, Simon. “Automatized Derivation of Comprehensive Specifications
    for Black-Box Services.” In <i>Proceedings of the 38th International Conference
    on Software Engineering Companion (ICSE)</i>, 815–18, 2016. <a href="https://doi.org/10.1145/2889160.2889271">https://doi.org/10.1145/2889160.2889271</a>.
  ieee: S. Schwichtenberg, “Automatized Derivation of Comprehensive Specifications
    for Black-box Services,” in <i>Proceedings of the 38th International Conference
    on Software Engineering Companion (ICSE)</i>, 2016, pp. 815–818.
  mla: Schwichtenberg, Simon. “Automatized Derivation of Comprehensive Specifications
    for Black-Box Services.” <i>Proceedings of the 38th International Conference on
    Software Engineering Companion (ICSE)</i>, 2016, pp. 815–18, doi:<a href="https://doi.org/10.1145/2889160.2889271">10.1145/2889160.2889271</a>.
  short: 'S. Schwichtenberg, in: Proceedings of the 38th International Conference
    on Software Engineering Companion (ICSE), 2016, pp. 815–818.'
date_created: 2017-10-17T12:41:34Z
date_updated: 2022-01-06T06:55:11Z
ddc:
- '040'
department:
- _id: '66'
doi: 10.1145/2889160.2889271
file:
- access_level: closed
  content_type: application/pdf
  creator: florida
  date_created: 2018-03-21T10:39:14Z
  date_updated: 2018-03-21T10:39:14Z
  file_id: '1516'
  file_name: 217-sig-alternate.pdf
  file_size: 691294
  relation: main_file
  success: 1
file_date_updated: 2018-03-21T10:39:14Z
has_accepted_license: '1'
language:
- iso: eng
page: 815-818
project:
- _id: '1'
  name: SFB 901
- _id: '9'
  name: SFB 901 - Subprojekt B1
- _id: '3'
  name: SFB 901 - Project Area B
publication: Proceedings of the 38th International Conference on Software Engineering
  Companion (ICSE)
status: public
title: Automatized Derivation of Comprehensive Specifications for Black-box Services
type: conference
user_id: '477'
year: '2016'
...
---
_id: '21702'
abstract:
- lang: eng
  text: Nowadays, the material efficiency and part reliability are two majorissues
    in product development. Thus a product optimization often requires complex structures
    that are hard to be manufactured conventionally. Additive Manufacturing (AM) however
    offers great potentials for producing complex shaped parts economically. Different
    approaches are feasible to exploit these potentials based on the part’s application
    from shape optimization of structural components to the integration of functions
    and other entities of assemblies. Several parameters are defined that influence
    the costs and quality of the future product and carefully have to be balanced.
    To do so, the use of already known tools for the optimization and design needs
    to be reconsidered and adapted to the special characteristics of AM. As not all
    optimization potentials can be realized perfectly, a decision methodology is required
    to obtain the relevant potentials and to get to a trade-off between all requirements
    including the ecological impact. The paper shows different approaches for product
    optimization with AM and procedures for decision making in order to get to the
    optimal solution.
author:
- first_name: T.
  full_name: Reiher, T.
  last_name: Reiher
- first_name: G.
  full_name: Deppe, G.
  last_name: Deppe
- first_name: R.
  full_name: Koch, R.
  last_name: Koch
citation:
  ama: 'Reiher T, Deppe G, Koch R. Combining material efficiency and part reliability
    by product optimization applying additive manufacturing. In: <i>International
    Conference Production Engineering and Management 2016</i>. Vol 6. ; 2016:27-38.
    doi:<a href="https://www.th-owl.de/elsa/download/333/334/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf">https://www.th-owl.de/elsa/download/333/334/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf</a>'
  apa: Reiher, T., Deppe, G., &#38; Koch, R. (2016). Combining material efficiency
    and part reliability by product optimization applying additive manufacturing.
    In <i>International Conference Production Engineering and Management 2016</i>
    (Vol. 6, pp. 27–38). <a href="https://www.th-owl.de/elsa/download/333/334/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf">https://www.th-owl.de/elsa/download/333/334/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf</a>
  bibtex: '@inproceedings{Reiher_Deppe_Koch_2016, title={Combining material efficiency
    and part reliability by product optimization applying additive manufacturing},
    volume={6}, DOI={<a href="https://www.th-owl.de/elsa/download/333/334/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf">https://www.th-owl.de/elsa/download/333/334/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf</a>},
    booktitle={International Conference Production Engineering and Management 2016},
    author={Reiher, T. and Deppe, G. and Koch, R.}, year={2016}, pages={27–38} }'
  chicago: Reiher, T., G. Deppe, and R. Koch. “Combining Material Efficiency and Part
    Reliability by Product Optimization Applying Additive Manufacturing.” In <i>International
    Conference Production Engineering and Management 2016</i>, 6:27–38, 2016. <a href="https://www.th-owl.de/elsa/download/333/334/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf">https://www.th-owl.de/elsa/download/333/334/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf</a>.
  ieee: T. Reiher, G. Deppe, and R. Koch, “Combining material efficiency and part
    reliability by product optimization applying additive manufacturing,” in <i>International
    Conference Production Engineering and Management 2016</i>, 2016, vol. 6, pp. 27–38.
  mla: Reiher, T., et al. “Combining Material Efficiency and Part Reliability by Product
    Optimization Applying Additive Manufacturing.” <i>International Conference Production
    Engineering and Management 2016</i>, vol. 6, 2016, pp. 27–38, doi:<a href="https://www.th-owl.de/elsa/download/333/334/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf">https://www.th-owl.de/elsa/download/333/334/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf</a>.
  short: 'T. Reiher, G. Deppe, R. Koch, in: International Conference Production Engineering
    and Management 2016, 2016, pp. 27–38.'
date_created: 2021-04-21T07:40:35Z
date_updated: 2022-01-06T06:55:11Z
department:
- _id: '144'
- _id: '219'
- _id: '624'
doi: https://www.th-owl.de/elsa/download/333/334/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf
intvolume: '         6'
language:
- iso: eng
page: 27-38
publication: International Conference Production Engineering and Management 2016
publication_identifier:
  isbn:
  - 978-3-946856-00-9
status: public
title: Combining material efficiency and part reliability by product optimization
  applying additive manufacturing
type: conference
user_id: '55833'
volume: 6
year: '2016'
...