---
_id: '22183'
abstract:
- lang: eng
text: Function integration is a key issue for an efficient and economic usage of
Additive Manufacturing. An efficient heat transfer by topology optimized structures
is a rarely considered approach which will be outlined with an exemplary electronic
housing which has been newly designed. A commercial projector unit, whose electrical
components in total produce 38 W, shall be integrated in the closed housing and
passively cooled by natural convection. Topology optimized structures shall be
generated in the inner part of the housing to transfer the heat homogenously from
the projector components to the housing wall while simultaneously minimizing the
mass. At the outside of the housing walls, lattice and rib structures are applied
to increase the effective surface for heat transfer by natural convection and
radiation. Furthermore, the housing geometry is optimized regarding a minimization
of support structures to reduce the post-processing effort. Finally, the housing
shall be built of AlSi10Mg by SLM.
author:
- first_name: Dennis
full_name: Menge, Dennis
id: '29240'
last_name: Menge
- first_name: Patrick
full_name: Delfs, Patrick
last_name: Delfs
- first_name: Marcel
full_name: Töws, Marcel
last_name: Töws
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
citation:
ama: 'Menge D, Delfs P, Töws M, Schmid H-J. Topology Optimized Heat Transfer Using
the Example of an Electronic Housing. In: 29th Annual International Solid Freeform
Fabrication Symposium. Vol 29. ; 2018:687-697.'
apa: Menge, D., Delfs, P., Töws, M., & Schmid, H.-J. (2018). Topology Optimized
Heat Transfer Using the Example of an Electronic Housing. 29th Annual International
Solid Freeform Fabrication Symposium, 29, 687–697.
bibtex: '@inproceedings{Menge_Delfs_Töws_Schmid_2018, title={Topology Optimized
Heat Transfer Using the Example of an Electronic Housing}, volume={29}, booktitle={29th
Annual International Solid Freeform Fabrication Symposium}, author={Menge, Dennis
and Delfs, Patrick and Töws, Marcel and Schmid, Hans-Joachim}, year={2018}, pages={687–697}
}'
chicago: Menge, Dennis, Patrick Delfs, Marcel Töws, and Hans-Joachim Schmid. “Topology
Optimized Heat Transfer Using the Example of an Electronic Housing.” In 29th
Annual International Solid Freeform Fabrication Symposium, 29:687–97, 2018.
ieee: D. Menge, P. Delfs, M. Töws, and H.-J. Schmid, “Topology Optimized Heat Transfer
Using the Example of an Electronic Housing,” in 29th Annual International Solid
Freeform Fabrication Symposium, 2018, vol. 29, pp. 687–697.
mla: Menge, Dennis, et al. “Topology Optimized Heat Transfer Using the Example of
an Electronic Housing.” 29th Annual International Solid Freeform Fabrication
Symposium, vol. 29, 2018, pp. 687–97.
short: 'D. Menge, P. Delfs, M. Töws, H.-J. Schmid, in: 29th Annual International
Solid Freeform Fabrication Symposium, 2018, pp. 687–697.'
date_created: 2021-05-14T07:46:13Z
date_updated: 2022-01-06T06:55:28Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
intvolume: ' 29'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: http://utw10945.utweb.utexas.edu/sites/default/files/2018/056%20TopologyOptimizedHeatTransferUsingtheExample.pdf
oa: '1'
page: 687-697
publication: 29th Annual International Solid Freeform Fabrication Symposium
status: public
title: Topology Optimized Heat Transfer Using the Example of an Electronic Housing
type: conference
user_id: '29240'
volume: 29
year: '2018'
...
---
_id: '22196'
abstract:
- lang: eng
text: The influence of selective laser sintering (SLS) parameters on PA12 part properties
is well known, but research on other materials is rare. One alternative material
is a thermoplastic elastomer (TPE) called PrimePart ST that is more elastic and
shows a distinct SLS processing behavior. It undergoes a three-dimensional temperature
distribution during the SLS process within the TPE part cake. To examine this
further, a temperature measurement system that allows temperature measurements
inside the part cake is applied to TPE in the present work. Position-dependent
temperature histories are directly correlated with the color and mechanical properties
of built parts and are in very good agreement with artificial heat treatment in
a furnace. Furthermore, it is clearly shown that the yellowish discoloration of
parts in different intensities is not only temperature dependent but also influenced
by the residual oxygen content in the process atmosphere. Nevertheless, the discoloration
has no influence on the mechanical part properties.
author:
- first_name: Christina
full_name: Kummert, Christina
last_name: Kummert
- first_name: Stefan
full_name: Josupeit, Stefan
last_name: Josupeit
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
citation:
ama: Kummert C, Josupeit S, Schmid H-J. Thermoplastic Elastomer Part Color as Function
of Temperature Histories and Oxygen Atmosphere During Selective Laser Sinterung.
Journal of Minerals, Metals and Materials Society. 2018;70(3):425-430.
doi:10.1007/s11837-017-2658-2
apa: Kummert, C., Josupeit, S., & Schmid, H.-J. (2018). Thermoplastic Elastomer
Part Color as Function of Temperature Histories and Oxygen Atmosphere During Selective
Laser Sinterung. Journal of Minerals, Metals and Materials Society, 70(3),
425–430. https://doi.org/10.1007/s11837-017-2658-2
bibtex: '@article{Kummert_Josupeit_Schmid_2018, title={Thermoplastic Elastomer Part
Color as Function of Temperature Histories and Oxygen Atmosphere During Selective
Laser Sinterung}, volume={70}, DOI={10.1007/s11837-017-2658-2},
number={3}, journal={Journal of Minerals, Metals and Materials Society}, publisher={Springer},
author={Kummert, Christina and Josupeit, Stefan and Schmid, Hans-Joachim}, year={2018},
pages={425–430} }'
chicago: 'Kummert, Christina, Stefan Josupeit, and Hans-Joachim Schmid. “Thermoplastic
Elastomer Part Color as Function of Temperature Histories and Oxygen Atmosphere
During Selective Laser Sinterung.” Journal of Minerals, Metals and Materials
Society 70, no. 3 (2018): 425–30. https://doi.org/10.1007/s11837-017-2658-2.'
ieee: C. Kummert, S. Josupeit, and H.-J. Schmid, “Thermoplastic Elastomer Part Color
as Function of Temperature Histories and Oxygen Atmosphere During Selective Laser
Sinterung,” Journal of Minerals, Metals and Materials Society, vol. 70,
no. 3, pp. 425–430, 2018.
mla: Kummert, Christina, et al. “Thermoplastic Elastomer Part Color as Function
of Temperature Histories and Oxygen Atmosphere During Selective Laser Sinterung.”
Journal of Minerals, Metals and Materials Society, vol. 70, no. 3, Springer,
2018, pp. 425–30, doi:10.1007/s11837-017-2658-2.
short: C. Kummert, S. Josupeit, H.-J. Schmid, Journal of Minerals, Metals and Materials
Society 70 (2018) 425–430.
date_created: 2021-05-14T07:46:28Z
date_updated: 2022-01-06T06:55:28Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
doi: 10.1007/s11837-017-2658-2
intvolume: ' 70'
issue: '3'
language:
- iso: eng
page: 425-430
publication: Journal of Minerals, Metals and Materials Society
publisher: Springer
status: public
title: Thermoplastic Elastomer Part Color as Function of Temperature Histories and
Oxygen Atmosphere During Selective Laser Sinterung
type: journal_article
user_id: '71545'
volume: 70
year: '2018'
...
---
_id: '22289'
author:
- first_name: Alexander Heinrich Johannes
full_name: Salten, Alexander Heinrich Johannes
id: '59551'
last_name: Salten
- first_name: Jan
full_name: Maćkowiak, Jan
last_name: Maćkowiak
- first_name: Jerzy
full_name: Maćkowiak, Jerzy
last_name: Maćkowiak
- first_name: Eugeny
full_name: Kenig, Eugeny
id: '665'
last_name: Kenig
citation:
ama: Salten AHJ, Maćkowiak J, Maćkowiak J, Kenig E. A Novel Approach to the Modelling
of Transport Phenomena in Random Packings. Chemical Engineering Transactions.
2018;69:349-354. doi:10.3303/CET1869059
apa: Salten, A. H. J., Maćkowiak, J., Maćkowiak, J., & Kenig, E. (2018). A Novel
Approach to the Modelling of Transport Phenomena in Random Packings. Chemical
Engineering Transactions, 69, 349–354. https://doi.org/10.3303/CET1869059
bibtex: '@article{Salten_Maćkowiak_Maćkowiak_Kenig_2018, title={A Novel Approach
to the Modelling of Transport Phenomena in Random Packings}, volume={69}, DOI={10.3303/CET1869059}, journal={Chemical
Engineering Transactions}, author={Salten, Alexander Heinrich Johannes and Maćkowiak,
Jan and Maćkowiak, Jerzy and Kenig, Eugeny}, year={2018}, pages={349–354} }'
chicago: 'Salten, Alexander Heinrich Johannes, Jan Maćkowiak, Jerzy Maćkowiak, and
Eugeny Kenig. “A Novel Approach to the Modelling of Transport Phenomena in Random
Packings.” Chemical Engineering Transactions 69 (2018): 349–54. https://doi.org/10.3303/CET1869059.'
ieee: A. H. J. Salten, J. Maćkowiak, J. Maćkowiak, and E. Kenig, “A Novel Approach
to the Modelling of Transport Phenomena in Random Packings,” Chemical Engineering
Transactions, vol. 69, pp. 349–354, 2018.
mla: Salten, Alexander Heinrich Johannes, et al. “A Novel Approach to the Modelling
of Transport Phenomena in Random Packings.” Chemical Engineering Transactions,
vol. 69, 2018, pp. 349–54, doi:10.3303/CET1869059.
short: A.H.J. Salten, J. Maćkowiak, J. Maćkowiak, E. Kenig, Chemical Engineering
Transactions 69 (2018) 349–354.
date_created: 2021-06-07T08:58:54Z
date_updated: 2022-01-06T06:55:30Z
department:
- _id: '145'
doi: 10.3303/CET1869059
intvolume: ' 69'
language:
- iso: eng
page: 349-354
publication: Chemical Engineering Transactions
status: public
title: A Novel Approach to the Modelling of Transport Phenomena in Random Packings
type: journal_article
user_id: '59551'
volume: 69
year: '2018'
...
---
_id: '22295'
author:
- first_name: Alexander Heinrich Johannes
full_name: Salten, Alexander Heinrich Johannes
id: '59551'
last_name: Salten
- first_name: J. F.
full_name: Maćkowiak, J. F.
last_name: Maćkowiak
- first_name: J.
full_name: Maćkowiak, J.
last_name: Maćkowiak
- first_name: Eugeny
full_name: Kenig, Eugeny
id: '665'
last_name: Kenig
citation:
ama: 'Salten AHJ, Maćkowiak JF, Maćkowiak J, Kenig E. A novel approach for the determination
of transport phenomena in random packings. In: Frankfurt am Main: ACHEMA 2018
32nd World Exhibition Congress on Chemical Engineering; 2018.'
apa: 'Salten, A. H. J., Maćkowiak, J. F., Maćkowiak, J., & Kenig, E. (2018).
A novel approach for the determination of transport phenomena in random packings.
Frankfurt am Main: ACHEMA 2018 32nd World Exhibition Congress on Chemical Engineering.'
bibtex: '@inproceedings{Salten_Maćkowiak_Maćkowiak_Kenig_2018, place={Frankfurt
am Main}, title={A novel approach for the determination of transport phenomena
in random packings}, publisher={ACHEMA 2018 32nd World Exhibition Congress on
Chemical Engineering}, author={Salten, Alexander Heinrich Johannes and Maćkowiak,
J. F. and Maćkowiak, J. and Kenig, Eugeny}, year={2018} }'
chicago: 'Salten, Alexander Heinrich Johannes, J. F. Maćkowiak, J. Maćkowiak, and
Eugeny Kenig. “A Novel Approach for the Determination of Transport Phenomena in
Random Packings.” Frankfurt am Main: ACHEMA 2018 32nd World Exhibition Congress
on Chemical Engineering, 2018.'
ieee: A. H. J. Salten, J. F. Maćkowiak, J. Maćkowiak, and E. Kenig, “A novel approach
for the determination of transport phenomena in random packings,” 2018.
mla: Salten, Alexander Heinrich Johannes, et al. A Novel Approach for the Determination
of Transport Phenomena in Random Packings. ACHEMA 2018 32nd World Exhibition
Congress on Chemical Engineering, 2018.
short: 'A.H.J. Salten, J.F. Maćkowiak, J. Maćkowiak, E. Kenig, in: ACHEMA 2018 32nd
World Exhibition Congress on Chemical Engineering, Frankfurt am Main, 2018.'
date_created: 2021-06-07T09:27:23Z
date_updated: 2022-01-06T06:55:30Z
department:
- _id: '145'
keyword:
- PubList
language:
- iso: eng
place: Frankfurt am Main
publisher: ACHEMA 2018 32nd World Exhibition Congress on Chemical Engineering
status: public
title: A novel approach for the determination of transport phenomena in random packings
type: conference_abstract
user_id: '59551'
year: '2018'
...
---
_id: '22296'
author:
- first_name: Alexander Heinrich Johannes
full_name: Salten, Alexander Heinrich Johannes
id: '59551'
last_name: Salten
- first_name: J. F.
full_name: Maćkowiak, J. F.
last_name: Maćkowiak
- first_name: J.
full_name: Maćkowiak, J.
last_name: Maćkowiak
- first_name: Eugeny
full_name: Kenig, Eugeny
id: '665'
last_name: Kenig
citation:
ama: 'Salten AHJ, Maćkowiak JF, Maćkowiak J, Kenig E. A novel approach to the modelling
of transport phenomena in random packings. In: Florenz: 11th International Conference
on Distillation and Absorption; 2018.'
apa: 'Salten, A. H. J., Maćkowiak, J. F., Maćkowiak, J., & Kenig, E. (2018).
A novel approach to the modelling of transport phenomena in random packings. Presented
at the 11th International Conference on Distillation and Absorption, Florenz:
11th International Conference on Distillation and Absorption.'
bibtex: '@inproceedings{Salten_Maćkowiak_Maćkowiak_Kenig_2018, place={Florenz},
title={A novel approach to the modelling of transport phenomena in random packings},
publisher={11th International Conference on Distillation and Absorption}, author={Salten,
Alexander Heinrich Johannes and Maćkowiak, J. F. and Maćkowiak, J. and Kenig,
Eugeny}, year={2018} }'
chicago: 'Salten, Alexander Heinrich Johannes, J. F. Maćkowiak, J. Maćkowiak, and
Eugeny Kenig. “A Novel Approach to the Modelling of Transport Phenomena in Random
Packings.” Florenz: 11th International Conference on Distillation and Absorption,
2018.'
ieee: A. H. J. Salten, J. F. Maćkowiak, J. Maćkowiak, and E. Kenig, “A novel approach
to the modelling of transport phenomena in random packings,” presented at the
11th International Conference on Distillation and Absorption, Florenz, 2018.
mla: Salten, Alexander Heinrich Johannes, et al. A Novel Approach to the Modelling
of Transport Phenomena in Random Packings. 11th International Conference on
Distillation and Absorption, 2018.
short: 'A.H.J. Salten, J.F. Maćkowiak, J. Maćkowiak, E. Kenig, in: 11th International
Conference on Distillation and Absorption, Florenz, 2018.'
conference:
location: Florenz
name: 11th International Conference on Distillation and Absorption
date_created: 2021-06-07T09:27:34Z
date_updated: 2022-01-06T06:55:30Z
department:
- _id: '145'
keyword:
- PubList
language:
- iso: eng
place: Florenz
publisher: 11th International Conference on Distillation and Absorption
status: public
title: A novel approach to the modelling of transport phenomena in random packings
type: conference_abstract
user_id: '59551'
year: '2018'
...
---
_id: '22430'
author:
- first_name: Stefan
full_name: Urbanek, Stefan
last_name: Urbanek
- first_name: Bernd
full_name: Ponick, Bernd
last_name: Ponick
- first_name: Alexander
full_name: Taube, Alexander
last_name: Taube
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
last_name: Hoyer
- first_name: Mirko
full_name: Schaper, Mirko
last_name: Schaper
- first_name: Stefan
full_name: Lammers, Stefan
id: '13835'
last_name: Lammers
- first_name: Tobias
full_name: Lieneke, Tobias
id: '13956'
last_name: Lieneke
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: 'Urbanek S, Ponick B, Taube A, et al. Additive Manufacturing of a Soft Magnetic
Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine. In: Conference
Paper, 2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni
2018, DOI: 10.1109/ITEC.2018.8450250. ; 2018.'
apa: 'Urbanek, S., Ponick, B., Taube, A., Hoyer, K.-P., Schaper, M., Lammers, S.,
… Zimmer, D. (2018). Additive Manufacturing of a Soft Magnetic Rotor Active Part
and Shaft for a Permanent Magnet Synchronous Machine. In Conference paper,
2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni 2018,
DOI: 10.1109/ITEC.2018.8450250.'
bibtex: '@inproceedings{Urbanek_Ponick_Taube_Hoyer_Schaper_Lammers_Lieneke_Zimmer_2018,
title={Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for
a Permanent Magnet Synchronous Machine}, booktitle={Conference paper, 2018 IEEE
Transportation Electrification Conference and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250},
author={Urbanek, Stefan and Ponick, Bernd and Taube, Alexander and Hoyer, Kay-Peter
and Schaper, Mirko and Lammers, Stefan and Lieneke, Tobias and Zimmer, Detmar},
year={2018} }'
chicago: 'Urbanek, Stefan, Bernd Ponick, Alexander Taube, Kay-Peter Hoyer, Mirko
Schaper, Stefan Lammers, Tobias Lieneke, and Detmar Zimmer. “Additive Manufacturing
of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous
Machine.” In Conference Paper, 2018 IEEE Transportation Electrification Conference
and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250, 2018.'
ieee: 'S. Urbanek et al., “Additive Manufacturing of a Soft Magnetic Rotor
Active Part and Shaft for a Permanent Magnet Synchronous Machine,” in Conference
paper, 2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni
2018, DOI: 10.1109/ITEC.2018.8450250, 2018.'
mla: 'Urbanek, Stefan, et al. “Additive Manufacturing of a Soft Magnetic Rotor Active
Part and Shaft for a Permanent Magnet Synchronous Machine.” Conference Paper,
2018 IEEE Transportation Electrification Conference and Expo (ITEC), Juni 2018,
DOI: 10.1109/ITEC.2018.8450250, 2018.'
short: 'S. Urbanek, B. Ponick, A. Taube, K.-P. Hoyer, M. Schaper, S. Lammers, T.
Lieneke, D. Zimmer, in: Conference Paper, 2018 IEEE Transportation Electrification
Conference and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250, 2018.'
date_created: 2021-06-15T11:10:02Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
language:
- iso: eng
publication: 'Conference paper, 2018 IEEE Transportation Electrification Conference
and Expo (ITEC), Juni 2018, DOI: 10.1109/ITEC.2018.8450250'
status: public
title: Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a
Permanent Magnet Synchronous Machine
type: conference
user_id: '38077'
year: '2018'
...
---
_id: '22433'
author:
- first_name: Johannes
full_name: Tominski, Johannes
last_name: Tominski
- first_name: Stefan
full_name: Lammers, Stefan
id: '13835'
last_name: Lammers
citation:
ama: 'Tominski J, Lammers S. Software-assisted design check of additive manufactured
components. In: 14th PERMAS Users’ Conference. Vol 14. ; 2018. doi:https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted'
apa: Tominski, J., & Lammers, S. (2018). Software-assisted design check of additive
manufactured components. In 14th PERMAS Users’ Conference (Vol. 14). https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted
bibtex: '@inproceedings{Tominski_Lammers_2018, title={Software-assisted design check
of additive manufactured components}, volume={14}, DOI={https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted},
booktitle={14th PERMAS Users’ Conference}, author={Tominski, Johannes and Lammers,
Stefan}, year={2018} }'
chicago: Tominski, Johannes, and Stefan Lammers. “Software-Assisted Design Check
of Additive Manufactured Components.” In 14th PERMAS Users’ Conference,
Vol. 14, 2018. https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted.
ieee: J. Tominski and S. Lammers, “Software-assisted design check of additive manufactured
components,” in 14th PERMAS Users’ Conference, 2018, vol. 14.
mla: Tominski, Johannes, and Stefan Lammers. “Software-Assisted Design Check of
Additive Manufactured Components.” 14th PERMAS Users’ Conference, vol.
14, 2018, doi:https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted.
short: 'J. Tominski, S. Lammers, in: 14th PERMAS Users’ Conference, 2018.'
date_created: 2021-06-15T11:10:05Z
date_updated: 2022-01-06T06:55:33Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
doi: https://www.semanticscholar.org/paper/METHOD-FOR-A-SOFTWARE-BASED-DESIGN-CHECK-OF-Tominski-Lammers/83e141f55b33041ade5e661958b449047d6f026e#extracted
intvolume: ' 14'
language:
- iso: eng
publication: 14th PERMAS Users' Conference
publication_identifier:
isbn:
- 978-3-926494-18-4
status: public
title: Software-assisted design check of additive manufactured components
type: conference
user_id: '38077'
volume: 14
year: '2018'
...
---
_id: '22434'
abstract:
- lang: eng
text: This paper reports on the experimental development and the theoretical analysis
of the scanning laser epitaxy (SLE) process that is currently being investigated
and developed at the Georgia Institute of Technology. SLE is a laser-based manufacturing
process for deposition of equiaxed, directionally solidified and single-crystal
nickel superalloys onto superalloy substrates through the selective melting and
re-solidification of superalloy powders. The thermal modeling of the system, done
in a commercial CFD software package, simulates a heat source moving over a powder
bed and considers the approximate change in the property values for consolidating
CMSX-4 nickel superalloy powder. The theoretical melt depth is obtained from the
melting temperature criteria and the resulting plots are presented alongside matching
experimental micrographs obtained through cross-sectional metallography. The influence
of the processing parameters on the microstructural evolution, as evidenced through
observations made from the micrographs, is discussed. This work is sponsored by
the Office of Naval Research, through grants N00173-07-1-G031 and N00014-10-1-0526.
author:
- first_name: Johannes
full_name: Tominski, Johannes
last_name: Tominski
- first_name: Stefan
full_name: Lammers, Stefan
id: '13835'
last_name: Lammers
- first_name: Christian
full_name: Wulf, Christian
last_name: Wulf
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: 'Tominski J, Lammers S, Wulf C, Zimmer D. Method for a Software-based Design
Check of Additively Manufactured Components. In: 29th Annual International
Solid Freeform Fabrication Symposium. Vol 29. ; 2018. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf'
apa: Tominski, J., Lammers, S., Wulf, C., & Zimmer, D. (2018). Method for a
Software-based Design Check of Additively Manufactured Components. In 29th
Annual International Solid Freeform Fabrication Symposium (Vol. 29). http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf
bibtex: '@inproceedings{Tominski_Lammers_Wulf_Zimmer_2018, title={Method for a Software-based
Design Check of Additively Manufactured Components}, volume={29}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf},
booktitle={29th Annual International Solid Freeform Fabrication Symposium}, author={Tominski,
Johannes and Lammers, Stefan and Wulf, Christian and Zimmer, Detmar}, year={2018}
}'
chicago: Tominski, Johannes, Stefan Lammers, Christian Wulf, and Detmar Zimmer.
“Method for a Software-Based Design Check of Additively Manufactured Components.”
In 29th Annual International Solid Freeform Fabrication Symposium, Vol.
29, 2018. http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf.
ieee: J. Tominski, S. Lammers, C. Wulf, and D. Zimmer, “Method for a Software-based
Design Check of Additively Manufactured Components,” in 29th Annual International
Solid Freeform Fabrication Symposium, 2018, vol. 29.
mla: Tominski, Johannes, et al. “Method for a Software-Based Design Check of Additively
Manufactured Components.” 29th Annual International Solid Freeform Fabrication
Symposium, vol. 29, 2018, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf.
short: 'J. Tominski, S. Lammers, C. Wulf, D. Zimmer, in: 29th Annual International
Solid Freeform Fabrication Symposium, 2018.'
date_created: 2021-06-15T11:10:06Z
date_updated: 2022-01-06T06:55:33Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
doi: http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf
intvolume: ' 29'
language:
- iso: eng
publication: 29th Annual International Solid Freeform Fabrication Symposium
status: public
title: Method for a Software-based Design Check of Additively Manufactured Components
type: conference
user_id: '38077'
volume: 29
year: '2018'
...
---
_id: '22435'
abstract:
- lang: eng
text: In der Industrie entsteht aufgrund des dynamischen Wettbewerbsumfelds ein
zunehmender Drang nach verkürzten Produktentstehungszeiten, hoher Funktionsintegration
und individualisierten Produkten. Mithin erlangen additive Fertigungsverfahren
eine zunehmende industrielle Bedeutung. Das Laser-Strahlschmelzen (LBM) als additives
Verfahren ist hierbei beispielhaft hervorzuheben, da es bereits im Bereich des
Prototypenbaus und der Kleinserienfertigung ein etabliertes Verfahren ist, das
an der Schwelle zum Einsatz in der Serienproduktion steht. Entscheidendes Hemmnis
für den Einsatz der additiven Fertigungsverfahren bildet die fehlende methodische
Ausnutzung der gestalterischen Freiheiten und Randbedingungen durch die vergleichsweise
neuartige Gruppe an Fertigungsverfahren im gesamten Produktentstehungsprozess.
In der Produktentwicklung bildet die Konstruktionsmethodik einen möglichen Ansatz,
um gestalterische Freiheiten und Vorteile additiver Fertigungsverfahren bereits
in frühen Phasen der Entwicklung gezielt zu berücksichtigen. Hierfür werden aufgrund
bestehender und allgemein anerkannter Konstruktionsmethoden (z.B. VDI2221, Pahl/Beitz,
etc.) Anknüpfungspunkte aufgezeigt, die eine Implementierung, speziell des Laser-Strahlschmelzens,
ermöglichen. Besonderes Augenmerk wird in dieser Veröffentlichung auf die beiden
Konstruktionsphasen Konzeption und Gestaltung gelegt. Hierzu werden Ergänzungen
oder Anpassungen der bestehenden Konstruktionsmethoden vorgestellt. In besonderer
Weise wird dabei auf die Einbringung und die Vorteile der additiven Fertigungsverfahren
eingegangen.
author:
- first_name: Thomas
full_name: Künneke, Thomas
id: '13226'
last_name: Künneke
- first_name: Sonja
full_name: Bücker, Sonja
last_name: Bücker
- first_name: Tobias
full_name: Lieneke, Tobias
id: '13956'
last_name: Lieneke
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: 'Künneke T, Bücker S, Lieneke T, Zimmer D. Ein Beitrag zur Anpassung bestehender
Konstruktionsmethodiken an die additiven Fertigungsverfahren. In: Proceedings
of the 15th Rapid.Tech Conference. Carl Hanser Verlag GmbH & Co. KG; 2018:128-143.
doi:10.3139/9783446458123.008'
apa: Künneke, T., Bücker, S., Lieneke, T., & Zimmer, D. (2018). Ein Beitrag
zur Anpassung bestehender Konstruktionsmethodiken an die additiven Fertigungsverfahren.
In Proceedings of the 15th Rapid.Tech Conference (pp. 128–143). Carl Hanser
Verlag GmbH & Co. KG. https://doi.org/10.3139/9783446458123.008
bibtex: '@inproceedings{Künneke_Bücker_Lieneke_Zimmer_2018, title={Ein Beitrag zur
Anpassung bestehender Konstruktionsmethodiken an die additiven Fertigungsverfahren},
DOI={10.3139/9783446458123.008},
booktitle={Proceedings of the 15th Rapid.Tech Conference}, publisher={Carl Hanser
Verlag GmbH & Co. KG}, author={Künneke, Thomas and Bücker, Sonja and Lieneke,
Tobias and Zimmer, Detmar}, year={2018}, pages={128–143} }'
chicago: Künneke, Thomas, Sonja Bücker, Tobias Lieneke, and Detmar Zimmer. “Ein
Beitrag Zur Anpassung Bestehender Konstruktionsmethodiken an Die Additiven Fertigungsverfahren.”
In Proceedings of the 15th Rapid.Tech Conference, 128–43. Carl Hanser Verlag
GmbH & Co. KG, 2018. https://doi.org/10.3139/9783446458123.008.
ieee: T. Künneke, S. Bücker, T. Lieneke, and D. Zimmer, “Ein Beitrag zur Anpassung
bestehender Konstruktionsmethodiken an die additiven Fertigungsverfahren,” in
Proceedings of the 15th Rapid.Tech Conference, 2018, pp. 128–143.
mla: Künneke, Thomas, et al. “Ein Beitrag Zur Anpassung Bestehender Konstruktionsmethodiken
an Die Additiven Fertigungsverfahren.” Proceedings of the 15th Rapid.Tech Conference,
Carl Hanser Verlag GmbH & Co. KG, 2018, pp. 128–43, doi:10.3139/9783446458123.008.
short: 'T. Künneke, S. Bücker, T. Lieneke, D. Zimmer, in: Proceedings of the 15th
Rapid.Tech Conference, Carl Hanser Verlag GmbH & Co. KG, 2018, pp. 128–143.'
date_created: 2021-06-15T11:10:08Z
date_updated: 2022-01-06T06:55:33Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
doi: 10.3139/9783446458123.008
language:
- iso: eng
page: 128-143
publication: Proceedings of the 15th Rapid.Tech Conference
publication_identifier:
isbn:
- 978-3-446-45812-3
publisher: Carl Hanser Verlag GmbH & Co. KG
status: public
title: Ein Beitrag zur Anpassung bestehender Konstruktionsmethodiken an die additiven
Fertigungsverfahren
type: conference
user_id: '38077'
year: '2018'
...
---
_id: '22436'
abstract:
- lang: eng
text: Die Additive Fertigung eröffnet neue Freiheitsgrade in der Produktentwicklung.
Unsicherheiten über die Wirtschaftlichkeit und Leistungsfähigkeit der aus der
Konstruktion ableitbaren Fertigungstechnologieketten sind zu beachten. In diesem
Beitrag wird eine Methode vorgestellt, welche die Anpassung einer bestehenden
Konstruktionsmethode berücksichtigt und eine iterative Bewertung der Konstruktionsentscheidungen
anhand von Technologieketten ermöglicht. Hiermit können die Potenziale der additiven
Fertigungstechnologien zielgerichtet realisiert werden.
author:
- first_name: Alexander
full_name: Jacob, Alexander
last_name: Jacob
- first_name: Thomas
full_name: Künneke, Thomas
id: '13226'
last_name: Künneke
- first_name: Tobias
full_name: Lieneke, Tobias
id: '13956'
last_name: Lieneke
- first_name: Tobias
full_name: Baumann, Tobias
last_name: Baumann
- first_name: Nicole
full_name: Stricker, Nicole
last_name: Stricker
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
- first_name: Gisela
full_name: Lanza, Gisela
last_name: Lanza
citation:
ama: Jacob A, Künneke T, Lieneke T, et al. Iterative Produktentwicklung und Produktionsplanung
für die Additive Fertigung. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb.
2018;113(11):742-745. doi:https://doi.org/10.3139/104.112005
apa: Jacob, A., Künneke, T., Lieneke, T., Baumann, T., Stricker, N., Zimmer, D.,
& Lanza, G. (2018). Iterative Produktentwicklung und Produktionsplanung für
die Additive Fertigung. ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb,
113(11), 742–745. https://doi.org/10.3139/104.112005
bibtex: '@article{Jacob_Künneke_Lieneke_Baumann_Stricker_Zimmer_Lanza_2018, title={Iterative
Produktentwicklung und Produktionsplanung für die Additive Fertigung}, volume={113},
DOI={https://doi.org/10.3139/104.112005},
number={11}, journal={ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb}, publisher={Carl
Hanser Verlag}, author={Jacob, Alexander and Künneke, Thomas and Lieneke, Tobias
and Baumann, Tobias and Stricker, Nicole and Zimmer, Detmar and Lanza, Gisela},
year={2018}, pages={742–745} }'
chicago: 'Jacob, Alexander, Thomas Künneke, Tobias Lieneke, Tobias Baumann, Nicole
Stricker, Detmar Zimmer, and Gisela Lanza. “Iterative Produktentwicklung Und Produktionsplanung
Für Die Additive Fertigung.” ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb
113, no. 11 (2018): 742–45. https://doi.org/10.3139/104.112005.'
ieee: A. Jacob et al., “Iterative Produktentwicklung und Produktionsplanung
für die Additive Fertigung,” ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb,
vol. 113, no. 11, pp. 742–745, 2018.
mla: Jacob, Alexander, et al. “Iterative Produktentwicklung Und Produktionsplanung
Für Die Additive Fertigung.” ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb,
vol. 113, no. 11, Carl Hanser Verlag, 2018, pp. 742–45, doi:https://doi.org/10.3139/104.112005.
short: A. Jacob, T. Künneke, T. Lieneke, T. Baumann, N. Stricker, D. Zimmer, G.
Lanza, ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb 113 (2018) 742–745.
date_created: 2021-06-15T11:10:09Z
date_updated: 2022-01-06T06:55:33Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
doi: https://doi.org/10.3139/104.112005
intvolume: ' 113'
issue: '11'
language:
- iso: eng
page: 742-745
publication: ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb
publisher: Carl Hanser Verlag
status: public
title: Iterative Produktentwicklung und Produktionsplanung für die Additive Fertigung
type: journal_article
user_id: '38077'
volume: 113
year: '2018'
...
---
_id: '22456'
author:
- first_name: Konrad
full_name: Boettcher, Konrad
last_name: Boettcher
- first_name: Mike
full_name: Bothe, Mike
id: '72973'
last_name: Bothe
citation:
ama: Boettcher K, Bothe M. Thin liquid droplet on top of a rotating non-isothermal
liquid layer. PAMM. 2018:653-654. doi:10.1002/pamm.201710295
apa: Boettcher, K., & Bothe, M. (2018). Thin liquid droplet on top of a rotating
non-isothermal liquid layer. PAMM, 653–654. https://doi.org/10.1002/pamm.201710295
bibtex: '@article{Boettcher_Bothe_2018, title={Thin liquid droplet on top of a rotating
non-isothermal liquid layer}, DOI={10.1002/pamm.201710295},
journal={PAMM}, author={Boettcher, Konrad and Bothe, Mike}, year={2018}, pages={653–654}
}'
chicago: Boettcher, Konrad, and Mike Bothe. “Thin Liquid Droplet on Top of a Rotating
Non-Isothermal Liquid Layer.” PAMM, 2018, 653–54. https://doi.org/10.1002/pamm.201710295.
ieee: K. Boettcher and M. Bothe, “Thin liquid droplet on top of a rotating non-isothermal
liquid layer,” PAMM, pp. 653–654, 2018.
mla: Boettcher, Konrad, and Mike Bothe. “Thin Liquid Droplet on Top of a Rotating
Non-Isothermal Liquid Layer.” PAMM, 2018, pp. 653–54, doi:10.1002/pamm.201710295.
short: K. Boettcher, M. Bothe, PAMM (2018) 653–654.
date_created: 2021-06-17T06:53:03Z
date_updated: 2022-01-06T06:55:33Z
department:
- _id: '9'
- _id: '145'
doi: 10.1002/pamm.201710295
language:
- iso: eng
page: 653-654
publication: PAMM
publication_identifier:
issn:
- 1617-7061
publication_status: published
status: public
title: Thin liquid droplet on top of a rotating non-isothermal liquid layer
type: journal_article
user_id: '14931'
year: '2018'
...
---
_id: '22468'
author:
- first_name: Sabine
full_name: Bartsch, Sabine
last_name: Bartsch
- first_name: Ilka
full_name: Mindt, Ilka
id: '32079'
last_name: Mindt
citation:
ama: 'Bartsch S, Mindt I. Section I: Digital Humanities: The Role of the Digital
in English Philology. In: Zwierlein A-J, Petzold J, Boehm K, Decker M, eds. Anglistentag
2017 Regensburg. Proceedings. Wissenschaftlicher Verlag; 2018.'
apa: 'Bartsch, S., & Mindt, I. (2018). Section I: Digital Humanities: The Role
of the Digital in English Philology. In A.-J. Zwierlein, J. Petzold, K. Boehm,
& M. Decker (Eds.), Anglistentag 2017 Regensburg. Proceedings. Wissenschaftlicher
Verlag.'
bibtex: '@inbook{Bartsch_Mindt_2018, place={Trier}, title={Section I: Digital Humanities:
The Role of the Digital in English Philology}, booktitle={Anglistentag 2017 Regensburg.
Proceedings}, publisher={Wissenschaftlicher Verlag}, author={Bartsch, Sabine and
Mindt, Ilka}, editor={Zwierlein, Anne-Julia and Petzold, Jochen and Boehm, Katharina
and Decker, Martin}, year={2018} }'
chicago: 'Bartsch, Sabine, and Ilka Mindt. “Section I: Digital Humanities: The Role
of the Digital in English Philology.” In Anglistentag 2017 Regensburg. Proceedings,
edited by Anne-Julia Zwierlein, Jochen Petzold, Katharina Boehm, and Martin Decker.
Trier: Wissenschaftlicher Verlag, 2018.'
ieee: 'S. Bartsch and I. Mindt, “Section I: Digital Humanities: The Role of the
Digital in English Philology,” in Anglistentag 2017 Regensburg. Proceedings,
A.-J. Zwierlein, J. Petzold, K. Boehm, and M. Decker, Eds. Trier: Wissenschaftlicher
Verlag, 2018.'
mla: 'Bartsch, Sabine, and Ilka Mindt. “Section I: Digital Humanities: The Role
of the Digital in English Philology.” Anglistentag 2017 Regensburg. Proceedings,
edited by Anne-Julia Zwierlein et al., Wissenschaftlicher Verlag, 2018.'
short: 'S. Bartsch, I. Mindt, in: A.-J. Zwierlein, J. Petzold, K. Boehm, M. Decker
(Eds.), Anglistentag 2017 Regensburg. Proceedings, Wissenschaftlicher Verlag,
Trier, 2018.'
conference:
location: Regensburg
name: 'Anglistentag 2017, Regensburg, Sektion zu "Digital Humanities: The Role of
the Digital in English Philology"'
date_created: 2021-06-18T11:11:52Z
date_updated: 2022-01-06T06:55:33Z
department:
- _id: '1'
- _id: '384'
editor:
- first_name: Anne-Julia
full_name: Zwierlein, Anne-Julia
last_name: Zwierlein
- first_name: Jochen
full_name: Petzold, Jochen
last_name: Petzold
- first_name: Katharina
full_name: Boehm, Katharina
last_name: Boehm
- first_name: Martin
full_name: Decker, Martin
last_name: Decker
language:
- iso: eng
place: Trier
publication: Anglistentag 2017 Regensburg. Proceedings
publication_identifier:
isbn:
- 978-3-86821-767-4
publication_status: published
publisher: Wissenschaftlicher Verlag
status: public
title: 'Section I: Digital Humanities: The Role of the Digital in English Philology'
type: book_chapter
user_id: '32079'
year: '2018'
...
---
_id: '22474'
author:
- first_name: Ilka
full_name: Mindt, Ilka
id: '32079'
last_name: Mindt
citation:
ama: 'Mindt I. Englischer Sprachwandel Im Zeitalter von Digitalisierung Und Innovation.
Vol 148. Paderborn: Bonifatius GmbH; 2018.'
apa: 'Mindt, I. (2018). Englischer Sprachwandel im Zeitalter von Digitalisierung
und Innovation (Vol. 148). Paderborn: Bonifatius GmbH.'
bibtex: '@book{Mindt_2018, place={Paderborn}, series={Paderborner Unireden}, title={Englischer
Sprachwandel im Zeitalter von Digitalisierung und Innovation}, volume={148}, publisher={Bonifatius
GmbH}, author={Mindt, Ilka}, year={2018}, collection={Paderborner Unireden} }'
chicago: 'Mindt, Ilka. Englischer Sprachwandel Im Zeitalter von Digitalisierung
Und Innovation. Vol. 148. Paderborner Unireden. Paderborn: Bonifatius GmbH,
2018.'
ieee: 'I. Mindt, Englischer Sprachwandel im Zeitalter von Digitalisierung und
Innovation, vol. 148. Paderborn: Bonifatius GmbH, 2018.'
mla: Mindt, Ilka. Englischer Sprachwandel Im Zeitalter von Digitalisierung Und
Innovation. Vol. 148, Bonifatius GmbH, 2018.
short: I. Mindt, Englischer Sprachwandel Im Zeitalter von Digitalisierung Und Innovation,
Bonifatius GmbH, Paderborn, 2018.
date_created: 2021-06-18T11:28:43Z
date_updated: 2022-01-06T06:55:33Z
department:
- _id: '1'
- _id: '384'
intvolume: ' 148'
language:
- iso: eng
place: Paderborn
publisher: Bonifatius GmbH
series_title: Paderborner Unireden
status: public
title: Englischer Sprachwandel im Zeitalter von Digitalisierung und Innovation
type: misc
user_id: '32079'
volume: 148
year: '2018'
...
---
_id: '22502'
author:
- first_name: Uwe
full_name: Brückner, Uwe
last_name: Brückner
citation:
ama: Brückner U. Entwurf Und Simulationsgestützte Analyse Eines Mechanisch Rekonfigurierbaren
Mehrmotorengetriebes. Shaker Verlag GmbH ; 2018. doi:10.2370/9783844063622
apa: Brückner, U. (2018). Entwurf und simulationsgestützte Analyse eines mechanisch
rekonfigurierbaren Mehrmotorengetriebes. Shaker Verlag GmbH . https://doi.org/10.2370/9783844063622
bibtex: '@book{Brückner_2018, title={Entwurf und simulationsgestützte Analyse eines
mechanisch rekonfigurierbaren Mehrmotorengetriebes}, DOI={10.2370/9783844063622},
publisher={Shaker Verlag GmbH }, author={Brückner, Uwe}, year={2018} }'
chicago: Brückner, Uwe. Entwurf Und Simulationsgestützte Analyse Eines Mechanisch
Rekonfigurierbaren Mehrmotorengetriebes. Shaker Verlag GmbH , 2018. https://doi.org/10.2370/9783844063622.
ieee: U. Brückner, Entwurf und simulationsgestützte Analyse eines mechanisch
rekonfigurierbaren Mehrmotorengetriebes. Shaker Verlag GmbH , 2018.
mla: Brückner, Uwe. Entwurf Und Simulationsgestützte Analyse Eines Mechanisch
Rekonfigurierbaren Mehrmotorengetriebes. Shaker Verlag GmbH , 2018, doi:10.2370/9783844063622.
short: U. Brückner, Entwurf Und Simulationsgestützte Analyse Eines Mechanisch Rekonfigurierbaren
Mehrmotorengetriebes, Shaker Verlag GmbH , 2018.
date_created: 2021-06-21T13:34:18Z
date_updated: 2022-01-06T06:55:35Z
department:
- _id: '9'
- _id: '146'
doi: 10.2370/9783844063622
language:
- iso: eng
publication_identifier:
isbn:
- 978-3-8440-6362-2
publisher: 'Shaker Verlag GmbH '
status: public
title: Entwurf und simulationsgestützte Analyse eines mechanisch rekonfigurierbaren
Mehrmotorengetriebes
type: dissertation
user_id: '38077'
year: '2018'
...
---
_id: '22503'
author:
- first_name: Malte
full_name: Strop, Malte
last_name: Strop
citation:
ama: Strop M. Entwurf Einer Intelligenten Betriebsstrategie Für Mehrmotorenantriebssysteme
Und Ihre Anwendung Auf Kautschukinnenmischer. Shaker Verlag GmbH ; 2018. doi:10.2370/9783844058789
apa: Strop, M. (2018). Entwurf einer intelligenten Betriebsstrategie für Mehrmotorenantriebssysteme
und ihre Anwendung auf Kautschukinnenmischer. Shaker Verlag GmbH . https://doi.org/10.2370/9783844058789
bibtex: '@book{Strop_2018, title={Entwurf einer intelligenten Betriebsstrategie
für Mehrmotorenantriebssysteme und ihre Anwendung auf Kautschukinnenmischer},
DOI={10.2370/9783844058789},
publisher={Shaker Verlag GmbH }, author={Strop, Malte}, year={2018} }'
chicago: Strop, Malte. Entwurf Einer Intelligenten Betriebsstrategie Für Mehrmotorenantriebssysteme
Und Ihre Anwendung Auf Kautschukinnenmischer. Shaker Verlag GmbH , 2018. https://doi.org/10.2370/9783844058789.
ieee: M. Strop, Entwurf einer intelligenten Betriebsstrategie für Mehrmotorenantriebssysteme
und ihre Anwendung auf Kautschukinnenmischer. Shaker Verlag GmbH , 2018.
mla: Strop, Malte. Entwurf Einer Intelligenten Betriebsstrategie Für Mehrmotorenantriebssysteme
Und Ihre Anwendung Auf Kautschukinnenmischer. Shaker Verlag GmbH , 2018, doi:10.2370/9783844058789.
short: M. Strop, Entwurf Einer Intelligenten Betriebsstrategie Für Mehrmotorenantriebssysteme
Und Ihre Anwendung Auf Kautschukinnenmischer, Shaker Verlag GmbH , 2018.
date_created: 2021-06-21T13:34:20Z
date_updated: 2022-01-06T06:55:35Z
department:
- _id: '9'
- _id: '146'
doi: 10.2370/9783844058789
language:
- iso: eng
publication_identifier:
isbn:
- 978-3-8440-5878-9
publisher: 'Shaker Verlag GmbH '
status: public
title: Entwurf einer intelligenten Betriebsstrategie für Mehrmotorenantriebssysteme
und ihre Anwendung auf Kautschukinnenmischer
type: dissertation
user_id: '38077'
year: '2018'
...
---
_id: '22506'
author:
- first_name: Uwe
full_name: Brückner, Uwe
last_name: Brückner
- first_name: Thomas
full_name: Künneke, Thomas
id: '13226'
last_name: Künneke
- first_name: Magnus Hubert
full_name: Schadomsky, Magnus Hubert
id: '11904'
last_name: Schadomsky
- first_name: Malte
full_name: Strop, Malte
last_name: Strop
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: Brückner U, Künneke T, Schadomsky MH, Strop M, Zimmer D. Elektromechanische
Antriebe. Carl Hanser Verlag; 2018:247-290. doi:10.3139/9783446456198.009
apa: Brückner, U., Künneke, T., Schadomsky, M. H., Strop, M., & Zimmer, D. (2018).
Elektromechanische Antriebe (pp. 247–290). Carl Hanser Verlag. https://doi.org/10.3139/9783446456198.009
bibtex: '@book{Brückner_Künneke_Schadomsky_Strop_Zimmer_2018, title={Elektromechanische
Antriebe}, DOI={10.3139/9783446456198.009},
publisher={Carl Hanser Verlag}, author={Brückner, Uwe and Künneke, Thomas and
Schadomsky, Magnus Hubert and Strop, Malte and Zimmer, Detmar}, year={2018}, pages={247–290}
}'
chicago: Brückner, Uwe, Thomas Künneke, Magnus Hubert Schadomsky, Malte Strop, and
Detmar Zimmer. Elektromechanische Antriebe. Carl Hanser Verlag, 2018. https://doi.org/10.3139/9783446456198.009.
ieee: U. Brückner, T. Künneke, M. H. Schadomsky, M. Strop, and D. Zimmer, Elektromechanische
Antriebe. Carl Hanser Verlag, 2018, pp. 247–290.
mla: Brückner, Uwe, et al. Elektromechanische Antriebe. Carl Hanser Verlag,
2018, pp. 247–90, doi:10.3139/9783446456198.009.
short: U. Brückner, T. Künneke, M.H. Schadomsky, M. Strop, D. Zimmer, Elektromechanische
Antriebe, Carl Hanser Verlag, 2018.
date_created: 2021-06-22T13:31:43Z
date_updated: 2022-01-06T06:55:35Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
doi: 10.3139/9783446456198.009
language:
- iso: eng
page: 247-290
publication_identifier:
isbn:
- 978-3-446-45619-8
publisher: Carl Hanser Verlag
status: public
title: Elektromechanische Antriebe
type: book
user_id: '38077'
year: '2018'
...
---
_id: '22658'
author:
- first_name: Charlotte
full_name: Kielar, Charlotte
last_name: Kielar
- first_name: Saminathan
full_name: Ramakrishnan, Saminathan
last_name: Ramakrishnan
- first_name: Sebastian
full_name: Fricke, Sebastian
last_name: Fricke
- first_name: Guido
full_name: Grundmeier, Guido
id: '194'
last_name: Grundmeier
- first_name: Adrian
full_name: Keller, Adrian
id: '48864'
last_name: Keller
orcid: 0000-0001-7139-3110
citation:
ama: Kielar C, Ramakrishnan S, Fricke S, Grundmeier G, Keller A. Dynamics of DNA
Origami Lattice Formation at Solid–Liquid Interfaces. ACS Applied Materials
& Interfaces. 2018;10:44844-44853. doi:10.1021/acsami.8b16047
apa: Kielar, C., Ramakrishnan, S., Fricke, S., Grundmeier, G., & Keller, A.
(2018). Dynamics of DNA Origami Lattice Formation at Solid–Liquid Interfaces.
ACS Applied Materials & Interfaces, 10, 44844–44853. https://doi.org/10.1021/acsami.8b16047
bibtex: '@article{Kielar_Ramakrishnan_Fricke_Grundmeier_Keller_2018, title={Dynamics
of DNA Origami Lattice Formation at Solid–Liquid Interfaces}, volume={10}, DOI={10.1021/acsami.8b16047}, journal={ACS
Applied Materials & Interfaces}, author={Kielar, Charlotte and Ramakrishnan,
Saminathan and Fricke, Sebastian and Grundmeier, Guido and Keller, Adrian}, year={2018},
pages={44844–44853} }'
chicago: 'Kielar, Charlotte, Saminathan Ramakrishnan, Sebastian Fricke, Guido Grundmeier,
and Adrian Keller. “Dynamics of DNA Origami Lattice Formation at Solid–Liquid
Interfaces.” ACS Applied Materials & Interfaces 10 (2018): 44844–53.
https://doi.org/10.1021/acsami.8b16047.'
ieee: C. Kielar, S. Ramakrishnan, S. Fricke, G. Grundmeier, and A. Keller, “Dynamics
of DNA Origami Lattice Formation at Solid–Liquid Interfaces,” ACS Applied Materials
& Interfaces, vol. 10, pp. 44844–44853, 2018.
mla: Kielar, Charlotte, et al. “Dynamics of DNA Origami Lattice Formation at Solid–Liquid
Interfaces.” ACS Applied Materials & Interfaces, vol. 10, 2018, pp.
44844–53, doi:10.1021/acsami.8b16047.
short: C. Kielar, S. Ramakrishnan, S. Fricke, G. Grundmeier, A. Keller, ACS Applied
Materials & Interfaces 10 (2018) 44844–44853.
date_created: 2021-07-08T12:18:33Z
date_updated: 2022-01-06T06:55:38Z
department:
- _id: '302'
doi: 10.1021/acsami.8b16047
intvolume: ' 10'
language:
- iso: eng
page: 44844-44853
publication: ACS Applied Materials & Interfaces
publication_identifier:
issn:
- 1944-8244
- 1944-8252
publication_status: published
status: public
title: Dynamics of DNA Origami Lattice Formation at Solid–Liquid Interfaces
type: journal_article
user_id: '48864'
volume: 10
year: '2018'
...
---
_id: '22659'
author:
- first_name: Saminathan
full_name: Ramakrishnan, Saminathan
last_name: Ramakrishnan
- first_name: Heini
full_name: Ijäs, Heini
last_name: Ijäs
- first_name: Veikko
full_name: Linko, Veikko
last_name: Linko
- first_name: Adrian
full_name: Keller, Adrian
id: '48864'
last_name: Keller
orcid: 0000-0001-7139-3110
citation:
ama: Ramakrishnan S, Ijäs H, Linko V, Keller A. Structural stability of DNA origami
nanostructures under application-specific conditions. Computational and Structural
Biotechnology Journal. 2018;16:342-349. doi:10.1016/j.csbj.2018.09.002
apa: Ramakrishnan, S., Ijäs, H., Linko, V., & Keller, A. (2018). Structural
stability of DNA origami nanostructures under application-specific conditions.
Computational and Structural Biotechnology Journal, 16, 342–349.
https://doi.org/10.1016/j.csbj.2018.09.002
bibtex: '@article{Ramakrishnan_Ijäs_Linko_Keller_2018, title={Structural stability
of DNA origami nanostructures under application-specific conditions}, volume={16},
DOI={10.1016/j.csbj.2018.09.002},
journal={Computational and Structural Biotechnology Journal}, author={Ramakrishnan,
Saminathan and Ijäs, Heini and Linko, Veikko and Keller, Adrian}, year={2018},
pages={342–349} }'
chicago: 'Ramakrishnan, Saminathan, Heini Ijäs, Veikko Linko, and Adrian Keller.
“Structural Stability of DNA Origami Nanostructures under Application-Specific
Conditions.” Computational and Structural Biotechnology Journal 16 (2018):
342–49. https://doi.org/10.1016/j.csbj.2018.09.002.'
ieee: S. Ramakrishnan, H. Ijäs, V. Linko, and A. Keller, “Structural stability of
DNA origami nanostructures under application-specific conditions,” Computational
and Structural Biotechnology Journal, vol. 16, pp. 342–349, 2018.
mla: Ramakrishnan, Saminathan, et al. “Structural Stability of DNA Origami Nanostructures
under Application-Specific Conditions.” Computational and Structural Biotechnology
Journal, vol. 16, 2018, pp. 342–49, doi:10.1016/j.csbj.2018.09.002.
short: S. Ramakrishnan, H. Ijäs, V. Linko, A. Keller, Computational and Structural
Biotechnology Journal 16 (2018) 342–349.
date_created: 2021-07-08T12:19:17Z
date_updated: 2022-01-06T06:55:38Z
department:
- _id: '302'
doi: 10.1016/j.csbj.2018.09.002
intvolume: ' 16'
language:
- iso: eng
page: 342-349
publication: Computational and Structural Biotechnology Journal
publication_identifier:
issn:
- 2001-0370
publication_status: published
status: public
title: Structural stability of DNA origami nanostructures under application-specific
conditions
type: journal_article
user_id: '48864'
volume: 16
year: '2018'
...
---
_id: '22660'
author:
- first_name: Charlotte
full_name: Kielar, Charlotte
last_name: Kielar
- first_name: Francesco V.
full_name: Reddavide, Francesco V.
last_name: Reddavide
- first_name: Stefan
full_name: Tubbenhauer, Stefan
last_name: Tubbenhauer
- first_name: Meiying
full_name: Cui, Meiying
last_name: Cui
- first_name: Xiaodan
full_name: Xu, Xiaodan
last_name: Xu
- first_name: Guido
full_name: Grundmeier, Guido
id: '194'
last_name: Grundmeier
- first_name: Yixin
full_name: Zhang, Yixin
last_name: Zhang
- first_name: Adrian
full_name: Keller, Adrian
id: '48864'
last_name: Keller
orcid: 0000-0001-7139-3110
citation:
ama: Kielar C, Reddavide FV, Tubbenhauer S, et al. Pharmacophore Nanoarrays on DNA
Origami Substrates as a Single-Molecule Assay for Fragment-Based Drug Discovery.
Angewandte Chemie International Edition. 2018;57:14873-14877. doi:10.1002/anie.201806778
apa: Kielar, C., Reddavide, F. V., Tubbenhauer, S., Cui, M., Xu, X., Grundmeier,
G., … Keller, A. (2018). Pharmacophore Nanoarrays on DNA Origami Substrates as
a Single-Molecule Assay for Fragment-Based Drug Discovery. Angewandte Chemie
International Edition, 57, 14873–14877. https://doi.org/10.1002/anie.201806778
bibtex: '@article{Kielar_Reddavide_Tubbenhauer_Cui_Xu_Grundmeier_Zhang_Keller_2018,
title={Pharmacophore Nanoarrays on DNA Origami Substrates as a Single-Molecule
Assay for Fragment-Based Drug Discovery}, volume={57}, DOI={10.1002/anie.201806778},
journal={Angewandte Chemie International Edition}, author={Kielar, Charlotte and
Reddavide, Francesco V. and Tubbenhauer, Stefan and Cui, Meiying and Xu, Xiaodan
and Grundmeier, Guido and Zhang, Yixin and Keller, Adrian}, year={2018}, pages={14873–14877}
}'
chicago: 'Kielar, Charlotte, Francesco V. Reddavide, Stefan Tubbenhauer, Meiying
Cui, Xiaodan Xu, Guido Grundmeier, Yixin Zhang, and Adrian Keller. “Pharmacophore
Nanoarrays on DNA Origami Substrates as a Single-Molecule Assay for Fragment-Based
Drug Discovery.” Angewandte Chemie International Edition 57 (2018): 14873–77.
https://doi.org/10.1002/anie.201806778.'
ieee: C. Kielar et al., “Pharmacophore Nanoarrays on DNA Origami Substrates
as a Single-Molecule Assay for Fragment-Based Drug Discovery,” Angewandte Chemie
International Edition, vol. 57, pp. 14873–14877, 2018.
mla: Kielar, Charlotte, et al. “Pharmacophore Nanoarrays on DNA Origami Substrates
as a Single-Molecule Assay for Fragment-Based Drug Discovery.” Angewandte Chemie
International Edition, vol. 57, 2018, pp. 14873–77, doi:10.1002/anie.201806778.
short: C. Kielar, F.V. Reddavide, S. Tubbenhauer, M. Cui, X. Xu, G. Grundmeier,
Y. Zhang, A. Keller, Angewandte Chemie International Edition 57 (2018) 14873–14877.
date_created: 2021-07-08T12:20:03Z
date_updated: 2022-01-06T06:55:38Z
department:
- _id: '302'
doi: 10.1002/anie.201806778
intvolume: ' 57'
language:
- iso: eng
page: 14873-14877
publication: Angewandte Chemie International Edition
publication_identifier:
issn:
- 1433-7851
publication_status: published
status: public
title: Pharmacophore Nanoarrays on DNA Origami Substrates as a Single-Molecule Assay
for Fragment-Based Drug Discovery
type: journal_article
user_id: '48864'
volume: 57
year: '2018'
...
---
_id: '22661'
author:
- first_name: Fabian
full_name: Kollmann, Fabian
last_name: Kollmann
- first_name: Saminathan
full_name: Ramakrishnan, Saminathan
last_name: Ramakrishnan
- first_name: Boxuan
full_name: Shen, Boxuan
last_name: Shen
- first_name: Guido
full_name: Grundmeier, Guido
id: '194'
last_name: Grundmeier
- first_name: Mauri A.
full_name: Kostiainen, Mauri A.
last_name: Kostiainen
- first_name: Veikko
full_name: Linko, Veikko
last_name: Linko
- first_name: Adrian
full_name: Keller, Adrian
id: '48864'
last_name: Keller
orcid: 0000-0001-7139-3110
citation:
ama: Kollmann F, Ramakrishnan S, Shen B, et al. Superstructure-Dependent Loading
of DNA Origami Nanostructures with a Groove-Binding Drug. ACS Omega. 2018;3:9441-9448.
doi:10.1021/acsomega.8b00934
apa: Kollmann, F., Ramakrishnan, S., Shen, B., Grundmeier, G., Kostiainen, M. A.,
Linko, V., & Keller, A. (2018). Superstructure-Dependent Loading of DNA Origami
Nanostructures with a Groove-Binding Drug. ACS Omega, 3, 9441–9448.
https://doi.org/10.1021/acsomega.8b00934
bibtex: '@article{Kollmann_Ramakrishnan_Shen_Grundmeier_Kostiainen_Linko_Keller_2018,
title={Superstructure-Dependent Loading of DNA Origami Nanostructures with a Groove-Binding
Drug}, volume={3}, DOI={10.1021/acsomega.8b00934},
journal={ACS Omega}, author={Kollmann, Fabian and Ramakrishnan, Saminathan and
Shen, Boxuan and Grundmeier, Guido and Kostiainen, Mauri A. and Linko, Veikko
and Keller, Adrian}, year={2018}, pages={9441–9448} }'
chicago: 'Kollmann, Fabian, Saminathan Ramakrishnan, Boxuan Shen, Guido Grundmeier,
Mauri A. Kostiainen, Veikko Linko, and Adrian Keller. “Superstructure-Dependent
Loading of DNA Origami Nanostructures with a Groove-Binding Drug.” ACS Omega
3 (2018): 9441–48. https://doi.org/10.1021/acsomega.8b00934.'
ieee: F. Kollmann et al., “Superstructure-Dependent Loading of DNA Origami
Nanostructures with a Groove-Binding Drug,” ACS Omega, vol. 3, pp. 9441–9448,
2018.
mla: Kollmann, Fabian, et al. “Superstructure-Dependent Loading of DNA Origami Nanostructures
with a Groove-Binding Drug.” ACS Omega, vol. 3, 2018, pp. 9441–48, doi:10.1021/acsomega.8b00934.
short: F. Kollmann, S. Ramakrishnan, B. Shen, G. Grundmeier, M.A. Kostiainen, V.
Linko, A. Keller, ACS Omega 3 (2018) 9441–9448.
date_created: 2021-07-08T12:20:49Z
date_updated: 2022-01-06T06:55:38Z
department:
- _id: '302'
doi: 10.1021/acsomega.8b00934
intvolume: ' 3'
language:
- iso: eng
page: 9441-9448
publication: ACS Omega
publication_identifier:
issn:
- 2470-1343
- 2470-1343
publication_status: published
status: public
title: Superstructure-Dependent Loading of DNA Origami Nanostructures with a Groove-Binding
Drug
type: journal_article
user_id: '48864'
volume: 3
year: '2018'
...