---
_id: '24022'
abstract:
- lang: eng
  text: In this paper we propose a novel low-power receiver architecture which uses
    a direct-detection receiver in combination with a 2.44 GHz 13 bit Barker Code
    SAW correlator for improvement of co-channel interference. Furthermore, to improve
    receiver sensitivity, a narrowband baseband correlator which uses pulse position
    modulation (PPM) is proposed. The receiver can be used as a Wake-up Receiver (WuRx)
    in Wireless Sensor Networks (WSN) to minimize the power dissipation and provide
    asynchronous and on-demand data communication. We present a rigorous analysis
    of the receiver. It shows that the RF front-end (SAW correlator and envelope detector)
    alone suffers from poor sensitivity due to the high baseband bandwidth and the
    absence of an RF low noise amplifier. However, by adding the narrowband correlator
    with an innovative Pulse Position Modulation (PPM) scheme, the overall sensitivity
    of the receiver reaches -63.1 dB with an improvement of 17.7 dB due to the use
    of the narrowband correlator that reduces the baseband bandwidth from 50 to 0.84
    MHz. By scaling the narrowband correlator bandwidth further down, the receiver
    sensitivity can be further improved.
author:
- first_name: Saed
  full_name: Abughannam, Saed
  id: '37628'
  last_name: Abughannam
- first_name: Christoph
  full_name: Scheytt, Christoph
  id: '37144'
  last_name: Scheytt
citation:
  ama: 'Abughannam S, Scheytt C. Sensitivity Analysis of a Low-Power Wake-Up Receiver
    Using an RF Barker Code SAW Correlator and a Baseband Narrowband Correlator. In:
    <i>IEEE International Symposium on Personal, Indoor and Mobile Radio Communications
    (PIMRC 2020) </i>. IEEE; 2020. doi:<a href="https://doi.org/10.1109/PIMRC48278.2020.9217198">10.1109/PIMRC48278.2020.9217198</a>'
  apa: Abughannam, S., &#38; Scheytt, C. (2020). Sensitivity Analysis of a Low-Power
    Wake-Up Receiver Using an RF Barker Code SAW Correlator and a Baseband Narrowband
    Correlator. <i>IEEE International Symposium on Personal, Indoor and Mobile Radio
    Communications (PIMRC 2020) </i>. <a href="https://doi.org/10.1109/PIMRC48278.2020.9217198">https://doi.org/10.1109/PIMRC48278.2020.9217198</a>
  bibtex: '@inproceedings{Abughannam_Scheytt_2020, place={Virtuelle Konferenz}, title={Sensitivity
    Analysis of a Low-Power Wake-Up Receiver Using an RF Barker Code SAW Correlator
    and a Baseband Narrowband Correlator}, DOI={<a href="https://doi.org/10.1109/PIMRC48278.2020.9217198">10.1109/PIMRC48278.2020.9217198</a>},
    booktitle={IEEE International Symposium on Personal, Indoor and Mobile Radio Communications
    (PIMRC 2020) }, publisher={IEEE}, author={Abughannam, Saed and Scheytt, Christoph},
    year={2020} }'
  chicago: 'Abughannam, Saed, and Christoph Scheytt. “Sensitivity Analysis of a Low-Power
    Wake-Up Receiver Using an RF Barker Code SAW Correlator and a Baseband Narrowband
    Correlator.” In <i>IEEE International Symposium on Personal, Indoor and Mobile
    Radio Communications (PIMRC 2020) </i>. Virtuelle Konferenz: IEEE, 2020. <a href="https://doi.org/10.1109/PIMRC48278.2020.9217198">https://doi.org/10.1109/PIMRC48278.2020.9217198</a>.'
  ieee: 'S. Abughannam and C. Scheytt, “Sensitivity Analysis of a Low-Power Wake-Up
    Receiver Using an RF Barker Code SAW Correlator and a Baseband Narrowband Correlator,”
    2020, doi: <a href="https://doi.org/10.1109/PIMRC48278.2020.9217198">10.1109/PIMRC48278.2020.9217198</a>.'
  mla: Abughannam, Saed, and Christoph Scheytt. “Sensitivity Analysis of a Low-Power
    Wake-Up Receiver Using an RF Barker Code SAW Correlator and a Baseband Narrowband
    Correlator.” <i>IEEE International Symposium on Personal, Indoor and Mobile Radio
    Communications (PIMRC 2020) </i>, IEEE, 2020, doi:<a href="https://doi.org/10.1109/PIMRC48278.2020.9217198">10.1109/PIMRC48278.2020.9217198</a>.
  short: 'S. Abughannam, C. Scheytt, in: IEEE International Symposium on Personal,
    Indoor and Mobile Radio Communications (PIMRC 2020) , IEEE, Virtuelle Konferenz,
    2020.'
conference:
  end_date: 2020.09.03
  start_date: 2020.08.31
date_created: 2021-09-09T11:50:13Z
date_updated: 2022-01-06T06:56:06Z
department:
- _id: '58'
doi: 10.1109/PIMRC48278.2020.9217198
language:
- iso: eng
place: Virtuelle Konferenz
publication: 'IEEE International Symposium on Personal, Indoor and Mobile Radio Communications
  (PIMRC 2020) '
publisher: IEEE
related_material:
  link:
  - relation: confirmation
    url: https://ieeexplore.ieee.org/document/9217198
status: public
title: Sensitivity Analysis of a Low-Power Wake-Up Receiver Using an RF Barker Code
  SAW Correlator and a Baseband Narrowband Correlator
type: conference
user_id: '15931'
year: '2020'
...
---
_id: '24027'
abstract:
- lang: eng
  text: Fault effect simulation is a well-established technique for the qualification
    of robust embedded software and hardware as required by different safety standards.
    Our article introduces a Virtual Prototype based approach for the fault analysis
    and fast simulation of a set of automatically generated and target compiled software
    programs. The approach scales to different RISC-V ISA standard subset configurations
    and is based on an instruction and hardware register coverage for automatic fault
    injections of permanent and transient bitflips. The analysis of each software
    binary evaluates its opcode type and register access coverage including the addressed
    memory space. Based on this information dedicated sets of fault injected hardware
    models, i.e., mutants, are generated. The simulation of all mutants conducted
    with the different binaries finally identifies the cases with a normal termination
    though executed on a faulty hardware model. They are identified as a subject for
    further investigations and improvements by the implementation of additional hardware
    or software safety countermeasures. Our final evaluation results with automatic
    C code generation, compilation, analysis, and simulation show that QEMU provides
    an adequate efficient platform, which also scales to more complex scenarios.
author:
- first_name: Peer
  full_name: Adelt, Peer
  id: '5603'
  last_name: Adelt
- first_name: Bastian
  full_name: Koppelmann, Bastian
  id: '25260'
  last_name: Koppelmann
- first_name: Wolfgang
  full_name: Müller, Wolfgang
  id: '16243'
  last_name: Müller
- first_name: Christoph
  full_name: Scheytt, Christoph
  id: '37144'
  last_name: Scheytt
citation:
  ama: 'Adelt P, Koppelmann B, Müller W, Scheytt C. A Scalable Platform for QEMU Based
    Fault Effect Analysis for RISC-V Hardware Architectures. In: <i>MBMV 2020 - Methods
    and Description Languages for Modelling and Verification of Circuits and Systems;
    GMM/ITG/GI-Workshop</i>. ; 2020.'
  apa: Adelt, P., Koppelmann, B., Müller, W., &#38; Scheytt, C. (2020). A Scalable
    Platform for QEMU Based Fault Effect Analysis for RISC-V Hardware Architectures.
    <i>MBMV 2020 - Methods and Description Languages for Modelling and Verification
    of Circuits and Systems; GMM/ITG/GI-Workshop</i>.
  bibtex: '@inproceedings{Adelt_Koppelmann_Müller_Scheytt_2020, place={Stuttgart,
    DE}, title={A Scalable Platform for QEMU Based Fault Effect Analysis for RISC-V
    Hardware Architectures}, booktitle={MBMV 2020 - Methods and Description Languages
    for Modelling and Verification of Circuits and Systems; GMM/ITG/GI-Workshop},
    author={Adelt, Peer and Koppelmann, Bastian and Müller, Wolfgang and Scheytt,
    Christoph}, year={2020} }'
  chicago: Adelt, Peer, Bastian Koppelmann, Wolfgang Müller, and Christoph Scheytt.
    “A Scalable Platform for QEMU Based Fault Effect Analysis for RISC-V Hardware
    Architectures.” In <i>MBMV 2020 - Methods and Description Languages for Modelling
    and Verification of Circuits and Systems; GMM/ITG/GI-Workshop</i>. Stuttgart,
    DE, 2020.
  ieee: P. Adelt, B. Koppelmann, W. Müller, and C. Scheytt, “A Scalable Platform for
    QEMU Based Fault Effect Analysis for RISC-V Hardware Architectures,” 2020.
  mla: Adelt, Peer, et al. “A Scalable Platform for QEMU Based Fault Effect Analysis
    for RISC-V Hardware Architectures.” <i>MBMV 2020 - Methods and Description Languages
    for Modelling and Verification of Circuits and Systems; GMM/ITG/GI-Workshop</i>,
    2020.
  short: 'P. Adelt, B. Koppelmann, W. Müller, C. Scheytt, in: MBMV 2020 - Methods
    and Description Languages for Modelling and Verification of Circuits and Systems;
    GMM/ITG/GI-Workshop, Stuttgart, DE, 2020.'
date_created: 2021-09-09T11:50:19Z
date_updated: 2022-01-06T06:56:06Z
department:
- _id: '58'
language:
- iso: eng
place: Stuttgart, DE
publication: MBMV 2020 - Methods and Description Languages for Modelling and Verification
  of Circuits and Systems; GMM/ITG/GI-Workshop
related_material:
  link:
  - relation: confirmation
    url: https://ieeexplore.ieee.org/document/9094540
status: public
title: A Scalable Platform for QEMU Based Fault Effect Analysis for RISC-V Hardware
  Architectures
type: conference
user_id: '15931'
year: '2020'
...
---
_id: '24030'
abstract:
- lang: eng
  text: Low-power receivers use direct-detection receiver architecture for its design
    simplicity and its low power dissipation. However, the direct-detection based
    receivers suffer from co-channel interference which significantly degrades the
    communication reliability. Co-channel interference robustness can be improved
    by using a BPSK Barker code modulated Surface Acoustic Wave (SAW) correlator as
    a prior stage to the RF direct detection circuit. This paper reports in details
    the design, fabrication and measurements of a 2.45 GHz SAW correlator with 13
    bits length Barker code. The device is fabricated on Lithium Niobate LiNbO3 substrate
    and it is composed of an input non-coded Inter Digital Transducers (IDT), a Piezoelectric
    substrate and an output coded IDT. The device wavelength λ is set to 1.6 μm, considering
    a phase velocity of the wave equal to 3970 m.s-1. Several configurations of the
    device were designed and fabricated, particularly varying the aperture and the
    non-coded IDT length to find out the optimal device configuration. All devices
    were found to operate with Insertion Loss (IL) ranging from 12 to 15 dB at 2.45
    GHz with a tip probing measurement setup, while a packaged sample has an IL of
    12.45 dB at 2.44 GHz mounted on a PCB with external 50 Ω LC matching network.
    Additionally, time-domain measurement for the packaged device shows that the output
    has a correlation peak with a peak-to-side-lobe (PSL) ratio of 4:1 for a -0.5
    dBm input BPSK Barker code signal.
author:
- first_name: Sylvain
  full_name: Ballandras, Sylvain
  last_name: Ballandras
- first_name: Saed
  full_name: Abughannam, Saed
  id: '37628'
  last_name: Abughannam
- first_name: Emilie
  full_name: Courjon, Emilie
  last_name: Courjon
- first_name: Christoph
  full_name: Scheytt, Christoph
  id: '37144'
  last_name: Scheytt
citation:
  ama: 'Ballandras S, Abughannam S, Courjon E, Scheytt C. Design and Fabrication of
    Barker Coded Surface Acoustic Wave (SAW) Correlator at 2.45 GHz for Low-Power
    Wake-up Receivers. In: <i>GeMiC 2020 - German Microwave Conference</i>. ; 2020.'
  apa: Ballandras, S., Abughannam, S., Courjon, E., &#38; Scheytt, C. (2020). Design
    and Fabrication of Barker Coded Surface Acoustic Wave (SAW) Correlator at 2.45
    GHz for Low-Power Wake-up Receivers. <i>GeMiC 2020 - German Microwave Conference</i>.
  bibtex: '@inproceedings{Ballandras_Abughannam_Courjon_Scheytt_2020, title={Design
    and Fabrication of Barker Coded Surface Acoustic Wave (SAW) Correlator at 2.45
    GHz for Low-Power Wake-up Receivers}, booktitle={GeMiC 2020 - German Microwave
    Conference}, author={Ballandras, Sylvain and Abughannam, Saed and Courjon, Emilie
    and Scheytt, Christoph}, year={2020} }'
  chicago: Ballandras, Sylvain, Saed Abughannam, Emilie Courjon, and Christoph Scheytt.
    “Design and Fabrication of Barker Coded Surface Acoustic Wave (SAW) Correlator
    at 2.45 GHz for Low-Power Wake-up Receivers.” In <i>GeMiC 2020 - German Microwave
    Conference</i>, 2020.
  ieee: S. Ballandras, S. Abughannam, E. Courjon, and C. Scheytt, “Design and Fabrication
    of Barker Coded Surface Acoustic Wave (SAW) Correlator at 2.45 GHz for Low-Power
    Wake-up Receivers,” 2020.
  mla: Ballandras, Sylvain, et al. “Design and Fabrication of Barker Coded Surface
    Acoustic Wave (SAW) Correlator at 2.45 GHz for Low-Power Wake-up Receivers.” <i>GeMiC
    2020 - German Microwave Conference</i>, 2020.
  short: 'S. Ballandras, S. Abughannam, E. Courjon, C. Scheytt, in: GeMiC 2020 - German
    Microwave Conference, 2020.'
date_created: 2021-09-09T11:50:23Z
date_updated: 2022-01-06T06:56:06Z
department:
- _id: '58'
language:
- iso: eng
publication: GeMiC 2020 - German Microwave Conference
related_material:
  link:
  - relation: confirmation
    url: https://ieeexplore.ieee.org/document/9080181
status: public
title: Design and Fabrication of Barker Coded Surface Acoustic Wave (SAW) Correlator
  at 2.45 GHz for Low-Power Wake-up Receivers
type: conference
user_id: '15931'
year: '2020'
...
---
_id: '24031'
author:
- first_name: Dirk Theodor
  full_name: Schraeder, Dirk Theodor
  last_name: Schraeder
- first_name: Tommy
  full_name: Schafran, Tommy
  id: '72888'
  last_name: Schafran
- first_name: Bärbel
  full_name: Geisen, Bärbel
  last_name: Geisen
- first_name: Lisa
  full_name: Rubbert, Lisa
  last_name: Rubbert
citation:
  ama: Schraeder DT, Schafran T, Geisen B, Rubbert L. Ein interdisziplinärer und akutmedizinischer
    Ansatz zur frühestmöglichen Intervention bei Patienten mit Diabetischem Fußsyndrom.
    <i>Orthopädie Technik</i>. 2020;71 (9):32-37.
  apa: Schraeder, D. T., Schafran, T., Geisen, B., &#38; Rubbert, L. (2020). Ein interdisziplinärer
    und akutmedizinischer Ansatz zur frühestmöglichen Intervention bei Patienten mit
    Diabetischem Fußsyndrom. <i>Orthopädie Technik</i>, <i>71 (9)</i>, 32–37.
  bibtex: '@article{Schraeder_Schafran_Geisen_Rubbert_2020, title={Ein interdisziplinärer
    und akutmedizinischer Ansatz zur frühestmöglichen Intervention bei Patienten mit
    Diabetischem Fußsyndrom}, volume={71 (9)}, journal={Orthopädie Technik}, author={Schraeder,
    Dirk Theodor and Schafran, Tommy and Geisen, Bärbel and Rubbert, Lisa}, year={2020},
    pages={32–37} }'
  chicago: 'Schraeder, Dirk Theodor, Tommy Schafran, Bärbel Geisen, and Lisa Rubbert.
    “Ein interdisziplinärer und akutmedizinischer Ansatz zur frühestmöglichen Intervention
    bei Patienten mit Diabetischem Fußsyndrom.” <i>Orthopädie Technik</i> 71 (9) (2020):
    32–37.'
  ieee: D. T. Schraeder, T. Schafran, B. Geisen, and L. Rubbert, “Ein interdisziplinärer
    und akutmedizinischer Ansatz zur frühestmöglichen Intervention bei Patienten mit
    Diabetischem Fußsyndrom,” <i>Orthopädie Technik</i>, vol. 71 (9), pp. 32–37, 2020.
  mla: Schraeder, Dirk Theodor, et al. “Ein interdisziplinärer und akutmedizinischer
    Ansatz zur frühestmöglichen Intervention bei Patienten mit Diabetischem Fußsyndrom.”
    <i>Orthopädie Technik</i>, vol. 71 (9), 2020, pp. 32–37.
  short: D.T. Schraeder, T. Schafran, B. Geisen, L. Rubbert, Orthopädie Technik 71
    (9) (2020) 32–37.
date_created: 2021-09-09T11:54:31Z
date_updated: 2022-01-06T06:56:06Z
department:
- _id: '143'
language:
- iso: ger
page: 32-37
publication: Orthopädie Technik
status: public
title: Ein interdisziplinärer und akutmedizinischer Ansatz zur frühestmöglichen Intervention
  bei Patienten mit Diabetischem Fußsyndrom
type: journal_article
user_id: '45673'
volume: 71 (9)
year: '2020'
...
---
_id: '24120'
abstract:
- lang: eng
  text: "<jats:title>Abstract</jats:title>\r\n               <jats:p>In two-phase
    flows in which the Capillary number is low, errors in the computation of the surface
    tension force at the interface cause Front-Capturing methods such as Volume of
    Fluid (VOF) and Level-Set (LS) to develop interfacial spurious currents. To better
    solve low Capillary number flows, special treatment is required to reduce such
    spurious currents. Smoothing the phase indicator field to more accurately compute
    the curvature or adding interfacial artificial viscosity are techniques that can
    treat this problem. This study explores OpenFOAM, Fluent and StarCCM+ VOF solvers
    for the classical case of a static bubble/droplet immersed in a continuous aqueous
    phase, with the focus on the ability of these solvers to adequately reduce spurious
    currents. The results are expected to be helpful for practicing chemical engineers
    who use multiphase CFD solvers in their work.</jats:p>"
author:
- first_name: Venkatesh
  full_name: Inguva, Venkatesh
  last_name: Inguva
- first_name: Andreas
  full_name: Schulz, Andreas
  last_name: Schulz
- first_name: Eugeny Y.
  full_name: Kenig, Eugeny Y.
  last_name: Kenig
citation:
  ama: 'Inguva V, Schulz A, Kenig EY. On methods to reduce spurious currents within
    VOF solver frameworks. Part 1: a review of the static bubble/droplet. <i>Chemical
    Product and Process Modeling</i>. Published online 2020. doi:<a href="https://doi.org/10.1515/cppm-2020-0052">10.1515/cppm-2020-0052</a>'
  apa: 'Inguva, V., Schulz, A., &#38; Kenig, E. Y. (2020). On methods to reduce spurious
    currents within VOF solver frameworks. Part 1: a review of the static bubble/droplet.
    <i>Chemical Product and Process Modeling</i>. <a href="https://doi.org/10.1515/cppm-2020-0052">https://doi.org/10.1515/cppm-2020-0052</a>'
  bibtex: '@article{Inguva_Schulz_Kenig_2020, title={On methods to reduce spurious
    currents within VOF solver frameworks. Part 1: a review of the static bubble/droplet},
    DOI={<a href="https://doi.org/10.1515/cppm-2020-0052">10.1515/cppm-2020-0052</a>},
    journal={Chemical Product and Process Modeling}, author={Inguva, Venkatesh and
    Schulz, Andreas and Kenig, Eugeny Y.}, year={2020} }'
  chicago: 'Inguva, Venkatesh, Andreas Schulz, and Eugeny Y. Kenig. “On Methods to
    Reduce Spurious Currents within VOF Solver Frameworks. Part 1: A Review of the
    Static Bubble/Droplet.” <i>Chemical Product and Process Modeling</i>, 2020. <a
    href="https://doi.org/10.1515/cppm-2020-0052">https://doi.org/10.1515/cppm-2020-0052</a>.'
  ieee: 'V. Inguva, A. Schulz, and E. Y. Kenig, “On methods to reduce spurious currents
    within VOF solver frameworks. Part 1: a review of the static bubble/droplet,”
    <i>Chemical Product and Process Modeling</i>, 2020, doi: <a href="https://doi.org/10.1515/cppm-2020-0052">10.1515/cppm-2020-0052</a>.'
  mla: 'Inguva, Venkatesh, et al. “On Methods to Reduce Spurious Currents within VOF
    Solver Frameworks. Part 1: A Review of the Static Bubble/Droplet.” <i>Chemical
    Product and Process Modeling</i>, 2020, doi:<a href="https://doi.org/10.1515/cppm-2020-0052">10.1515/cppm-2020-0052</a>.'
  short: V. Inguva, A. Schulz, E.Y. Kenig, Chemical Product and Process Modeling (2020).
date_created: 2021-09-10T07:53:00Z
date_updated: 2022-01-06T06:56:07Z
doi: 10.1515/cppm-2020-0052
language:
- iso: eng
publication: Chemical Product and Process Modeling
publication_identifier:
  issn:
  - 1934-2659
  - 2194-6159
publication_status: published
status: public
title: 'On methods to reduce spurious currents within VOF solver frameworks. Part
  1: a review of the static bubble/droplet'
type: journal_article
user_id: '75069'
year: '2020'
...
---
_id: '24133'
author:
- first_name: Volker
  full_name: Schöppner, Volker
  id: '20530'
  last_name: Schöppner
- first_name: Laura
  full_name: Austermeier, Laura
  id: '45326'
  last_name: Austermeier
- first_name: Kilian
  full_name: Dietl, Kilian
  last_name: Dietl
citation:
  ama: Schöppner V, Austermeier L, Dietl K. Der richtige Dreh für Simulationen. <i>Blasformen
    &#38; Extrusionswerkzeuge</i>. 2020.
  apa: Schöppner, V., Austermeier, L., &#38; Dietl, K. (2020). Der richtige Dreh für
    Simulationen. <i>Blasformen &#38; Extrusionswerkzeuge</i>.
  bibtex: '@article{Schöppner_Austermeier_Dietl_2020, title={Der richtige Dreh für
    Simulationen}, journal={Blasformen &#38; Extrusionswerkzeuge}, author={Schöppner,
    Volker and Austermeier, Laura and Dietl, Kilian}, year={2020} }'
  chicago: Schöppner, Volker, Laura Austermeier, and Kilian Dietl. “Der richtige Dreh
    für Simulationen.” <i>Blasformen &#38; Extrusionswerkzeuge</i>, 2020.
  ieee: V. Schöppner, L. Austermeier, and K. Dietl, “Der richtige Dreh für Simulationen,”
    <i>Blasformen &#38; Extrusionswerkzeuge</i>, 2020.
  mla: Schöppner, Volker, et al. “Der richtige Dreh für Simulationen.” <i>Blasformen
    &#38; Extrusionswerkzeuge</i>, 2020.
  short: V. Schöppner, L. Austermeier, K. Dietl, Blasformen &#38; Extrusionswerkzeuge
    (2020).
date_created: 2021-09-10T08:39:00Z
date_updated: 2022-01-06T06:56:07Z
department:
- _id: '367'
- _id: '9'
- _id: '321'
keyword:
- Compoundieren
- Doppenschneckenextruder
- Energieeintrag
language:
- iso: ger
page: '7'
publication: Blasformen & Extrusionswerkzeuge
publication_date: '2020'
publication_status: published
status: public
title: Der richtige Dreh für Simulationen
type: newspaper_article
user_id: '45326'
year: '2020'
...
---
_id: '24134'
author:
- first_name: Volker
  full_name: Schöppner, Volker
  id: '20530'
  last_name: Schöppner
- first_name: Laura
  full_name: Austermeier, Laura
  id: '45326'
  last_name: Austermeier
- first_name: Kilian
  full_name: Dietl, Kilian
  last_name: Dietl
citation:
  ama: Schöppner V, Austermeier L, Dietl K. SKZ simuliert Doppelschnecke. <i>K Zeitung</i>.
    2020.
  apa: Schöppner, V., Austermeier, L., &#38; Dietl, K. (2020). SKZ simuliert Doppelschnecke.
    <i>K Zeitung</i>.
  bibtex: '@article{Schöppner_Austermeier_Dietl_2020, title={SKZ simuliert Doppelschnecke},
    journal={K Zeitung}, author={Schöppner, Volker and Austermeier, Laura and Dietl,
    Kilian}, year={2020} }'
  chicago: Schöppner, Volker, Laura Austermeier, and Kilian Dietl. “SKZ simuliert
    Doppelschnecke.” <i>K Zeitung</i>, 2020.
  ieee: V. Schöppner, L. Austermeier, and K. Dietl, “SKZ simuliert Doppelschnecke,”
    <i>K Zeitung</i>, 2020.
  mla: Schöppner, Volker, et al. “SKZ simuliert Doppelschnecke.” <i>K Zeitung</i>,
    2020.
  short: V. Schöppner, L. Austermeier, K. Dietl, K Zeitung (2020).
date_created: 2021-09-10T08:48:00Z
date_updated: 2022-01-06T06:56:07Z
department:
- _id: '367'
- _id: '9'
- _id: '321'
keyword:
- Compoundieren
- Doppenschneckenextruder
- Energieeintrag
language:
- iso: ger
publication: K Zeitung
publication_date: 2020-11-06
publication_status: published
status: public
title: SKZ simuliert Doppelschnecke
type: newspaper_article
user_id: '45326'
year: '2020'
...
---
_id: '24145'
author:
- first_name: Arunselvan
  full_name: Ramaswamy, Arunselvan
  id: '66937'
  last_name: Ramaswamy
  orcid: https://orcid.org/ 0000-0001-7547-8111
citation:
  ama: 'Ramaswamy A. DSPG: Decentralized Simultaneous Perturbations Gradient Descent
    Scheme. In: <i>2020 28th Euromicro International Conference on Parallel, Distributed
    and Network-Based Processing (PDP)</i>. ; 2020:54-62.'
  apa: 'Ramaswamy, A. (2020). DSPG: Decentralized Simultaneous Perturbations Gradient
    Descent Scheme. <i>2020 28th Euromicro International Conference on Parallel, Distributed
    and Network-Based Processing (PDP)</i>, 54–62.'
  bibtex: '@inproceedings{Ramaswamy_2020, title={DSPG: Decentralized Simultaneous
    Perturbations Gradient Descent Scheme}, booktitle={2020 28th Euromicro International
    Conference on Parallel, Distributed and Network-Based Processing (PDP)}, author={Ramaswamy,
    Arunselvan}, year={2020}, pages={54–62} }'
  chicago: 'Ramaswamy, Arunselvan. “DSPG: Decentralized Simultaneous Perturbations
    Gradient Descent Scheme.” In <i>2020 28th Euromicro International Conference on
    Parallel, Distributed and Network-Based Processing (PDP)</i>, 54–62, 2020.'
  ieee: 'A. Ramaswamy, “DSPG: Decentralized Simultaneous Perturbations Gradient Descent
    Scheme,” in <i>2020 28th Euromicro International Conference on Parallel, Distributed
    and Network-Based Processing (PDP)</i>, 2020, pp. 54–62.'
  mla: 'Ramaswamy, Arunselvan. “DSPG: Decentralized Simultaneous Perturbations Gradient
    Descent Scheme.” <i>2020 28th Euromicro International Conference on Parallel,
    Distributed and Network-Based Processing (PDP)</i>, 2020, pp. 54–62.'
  short: 'A. Ramaswamy, in: 2020 28th Euromicro International Conference on Parallel,
    Distributed and Network-Based Processing (PDP), 2020, pp. 54–62.'
date_created: 2021-09-10T09:58:09Z
date_updated: 2022-01-06T06:56:08Z
language:
- iso: eng
page: 54-62
publication: 2020 28th Euromicro International Conference on Parallel, Distributed
  and Network-Based Processing (PDP)
status: public
title: 'DSPG: Decentralized Simultaneous Perturbations Gradient Descent Scheme'
type: conference
user_id: '66937'
year: '2020'
...
---
_id: '24146'
author:
- first_name: Stefan Helmut
  full_name: Heid, Stefan Helmut
  id: '39640'
  last_name: Heid
  orcid: 0000-0002-9461-7372
- first_name: Arunselvan
  full_name: Ramaswamy, Arunselvan
  id: '66937'
  last_name: Ramaswamy
  orcid: https://orcid.org/ 0000-0001-7547-8111
- first_name: Eyke
  full_name: Hüllermeier, Eyke
  id: '48129'
  last_name: Hüllermeier
citation:
  ama: 'Heid SH, Ramaswamy A, Hüllermeier E. Constrained Multi-Agent Optimization
    with Unbounded Information Delay. In: <i>Proceedings-30. Workshop Computational
    Intelligence: Berlin, 26.-27. November 2020</i>. Vol 26. ; 2020:247.'
  apa: 'Heid, S. H., Ramaswamy, A., &#38; Hüllermeier, E. (2020). Constrained Multi-Agent
    Optimization with Unbounded Information Delay. <i>Proceedings-30. Workshop Computational
    Intelligence: Berlin, 26.-27. November 2020</i>, <i>26</i>, 247.'
  bibtex: '@inproceedings{Heid_Ramaswamy_Hüllermeier_2020, title={Constrained Multi-Agent
    Optimization with Unbounded Information Delay}, volume={26}, booktitle={Proceedings-30.
    Workshop Computational Intelligence: Berlin, 26.-27. November 2020}, author={Heid,
    Stefan Helmut and Ramaswamy, Arunselvan and Hüllermeier, Eyke}, year={2020}, pages={247}
    }'
  chicago: 'Heid, Stefan Helmut, Arunselvan Ramaswamy, and Eyke Hüllermeier. “Constrained
    Multi-Agent Optimization with Unbounded Information Delay.” In <i>Proceedings-30.
    Workshop Computational Intelligence: Berlin, 26.-27. November 2020</i>, 26:247,
    2020.'
  ieee: 'S. H. Heid, A. Ramaswamy, and E. Hüllermeier, “Constrained Multi-Agent Optimization
    with Unbounded Information Delay,” in <i>Proceedings-30. Workshop Computational
    Intelligence: Berlin, 26.-27. November 2020</i>, 2020, vol. 26, p. 247.'
  mla: 'Heid, Stefan Helmut, et al. “Constrained Multi-Agent Optimization with Unbounded
    Information Delay.” <i>Proceedings-30. Workshop Computational Intelligence: Berlin,
    26.-27. November 2020</i>, vol. 26, 2020, p. 247.'
  short: 'S.H. Heid, A. Ramaswamy, E. Hüllermeier, in: Proceedings-30. Workshop Computational
    Intelligence: Berlin, 26.-27. November 2020, 2020, p. 247.'
date_created: 2021-09-10T09:59:16Z
date_updated: 2022-01-06T06:56:08Z
intvolume: '        26'
language:
- iso: eng
page: '247'
publication: 'Proceedings-30. Workshop Computational Intelligence: Berlin, 26.-27.
  November 2020'
status: public
title: Constrained Multi-Agent Optimization with Unbounded Information Delay
type: conference
user_id: '66937'
volume: 26
year: '2020'
...
---
_id: '24147'
author:
- first_name: Arunselvan
  full_name: Ramaswamy, Arunselvan
  id: '66937'
  last_name: Ramaswamy
  orcid: https://orcid.org/ 0000-0001-7547-8111
- first_name: Shalabh
  full_name: Bhatnagar, Shalabh
  last_name: Bhatnagar
- first_name: Daniel E
  full_name: Quevedo, Daniel E
  last_name: Quevedo
citation:
  ama: Ramaswamy A, Bhatnagar S, Quevedo DE. Asynchronous stochastic approximations
    with asymptotically biased errors and deep multi-agent learning. <i>IEEE Transactions
    on Automatic Control</i>. Published online 2020.
  apa: Ramaswamy, A., Bhatnagar, S., &#38; Quevedo, D. E. (2020). Asynchronous stochastic
    approximations with asymptotically biased errors and deep multi-agent learning.
    <i>IEEE Transactions on Automatic Control</i>.
  bibtex: '@article{Ramaswamy_Bhatnagar_Quevedo_2020, title={Asynchronous stochastic
    approximations with asymptotically biased errors and deep multi-agent learning},
    journal={IEEE Transactions on Automatic Control}, publisher={IEEE}, author={Ramaswamy,
    Arunselvan and Bhatnagar, Shalabh and Quevedo, Daniel E}, year={2020} }'
  chicago: Ramaswamy, Arunselvan, Shalabh Bhatnagar, and Daniel E Quevedo. “Asynchronous
    Stochastic Approximations with Asymptotically Biased Errors and Deep Multi-Agent
    Learning.” <i>IEEE Transactions on Automatic Control</i>, 2020.
  ieee: A. Ramaswamy, S. Bhatnagar, and D. E. Quevedo, “Asynchronous stochastic approximations
    with asymptotically biased errors and deep multi-agent learning,” <i>IEEE Transactions
    on Automatic Control</i>, 2020.
  mla: Ramaswamy, Arunselvan, et al. “Asynchronous Stochastic Approximations with
    Asymptotically Biased Errors and Deep Multi-Agent Learning.” <i>IEEE Transactions
    on Automatic Control</i>, IEEE, 2020.
  short: A. Ramaswamy, S. Bhatnagar, D.E. Quevedo, IEEE Transactions on Automatic
    Control (2020).
date_created: 2021-09-10T10:01:18Z
date_updated: 2022-01-06T06:56:08Z
language:
- iso: eng
publication: IEEE Transactions on Automatic Control
publisher: IEEE
status: public
title: Asynchronous stochastic approximations with asymptotically biased errors and
  deep multi-agent learning
type: journal_article
user_id: '66937'
year: '2020'
...
---
_id: '24182'
abstract:
- lang: eng
  text: <jats:title>Abstract</jats:title><jats:p>This paper presents the results of
    an interlaboratory study of the rheological properties of cement paste and ultrasound
    gel as reference substance. The goal was to quantify the comparability and reproducibility
    of measurements of the Bingham parameters yield stress and plastic viscosity when
    measured on one specific paste composition and one particular ultrasound gel in
    different laboratories using different rheometers and measurement geometries.
    The procedures for both in preparing the cement paste and carrying out the rheological
    measurements on cement paste and ultrasound gel were carefully defined for all
    of the study’s participants. Different conversion schemes for comparing the results
    obtained with the different measurement setups are presented here and critically
    discussed. The procedure proposed in this paper ensured a reasonable comparability
    of the results with a coefficient of variation for the yield stress of 27% and
    for the plastic viscosity of 24%, despite the individual measurement series’ having
    been performed in different labs with different rheometers and measurement geometries.</jats:p>
author:
- first_name: Michael
  full_name: Haist, Michael
  last_name: Haist
- first_name: Julian
  full_name: Link, Julian
  last_name: Link
- first_name: David
  full_name: Nicia, David
  last_name: Nicia
- first_name: Sarah
  full_name: Leinitz, Sarah
  last_name: Leinitz
- first_name: Christian
  full_name: Baumert, Christian
  last_name: Baumert
- first_name: Tabea
  full_name: von Bronk, Tabea
  last_name: von Bronk
- first_name: Dario
  full_name: Cotardo, Dario
  last_name: Cotardo
- first_name: Mahmoud
  full_name: Eslami Pirharati, Mahmoud
  last_name: Eslami Pirharati
- first_name: Shirin
  full_name: Fataei, Shirin
  last_name: Fataei
- first_name: Harald
  full_name: Garrecht, Harald
  last_name: Garrecht
- first_name: Christoph
  full_name: Gehlen, Christoph
  last_name: Gehlen
- first_name: Inga
  full_name: Hauschildt, Inga
  last_name: Hauschildt
- first_name: Irina
  full_name: Ivanova, Irina
  last_name: Ivanova
- first_name: Steffen
  full_name: Jesinghausen, Steffen
  last_name: Jesinghausen
- first_name: Christopher
  full_name: Klein, Christopher
  last_name: Klein
- first_name: Hans-W.
  full_name: Krauss, Hans-W.
  last_name: Krauss
- first_name: Ludger
  full_name: Lohaus, Ludger
  last_name: Lohaus
- first_name: Dirk
  full_name: Lowke, Dirk
  last_name: Lowke
- first_name: Oliver
  full_name: Mazanec, Oliver
  last_name: Mazanec
- first_name: Sebastian
  full_name: Pawelczyk, Sebastian
  last_name: Pawelczyk
- first_name: Ursula
  full_name: Pott, Ursula
  last_name: Pott
- first_name: Nonkululeko W.
  full_name: Radebe, Nonkululeko W.
  last_name: Radebe
- first_name: Joachim Jürgen
  full_name: Riedmiller, Joachim Jürgen
  last_name: Riedmiller
- first_name: Hans-Joachim
  full_name: Schmid, Hans-Joachim
  last_name: Schmid
- first_name: Wolfram
  full_name: Schmidt, Wolfram
  last_name: Schmidt
- first_name: Egor
  full_name: Secrieru, Egor
  last_name: Secrieru
- first_name: Dietmar
  full_name: Stephan, Dietmar
  last_name: Stephan
- first_name: Mareike
  full_name: Thiedeitz, Mareike
  last_name: Thiedeitz
- first_name: Manfred
  full_name: Wilhelm, Manfred
  last_name: Wilhelm
- first_name: Viktor
  full_name: Mechtcherine, Viktor
  last_name: Mechtcherine
citation:
  ama: 'Haist M, Link J, Nicia D, et al. Interlaboratory study on rheological properties
    of cement pastes and reference substances: comparability of measurements performed
    with different rheometers and measurement geometries. <i>Materials and Structures</i>.
    Published online 2020. doi:<a href="https://doi.org/10.1617/s11527-020-01477-w">10.1617/s11527-020-01477-w</a>'
  apa: 'Haist, M., Link, J., Nicia, D., Leinitz, S., Baumert, C., von Bronk, T., Cotardo,
    D., Eslami Pirharati, M., Fataei, S., Garrecht, H., Gehlen, C., Hauschildt, I.,
    Ivanova, I., Jesinghausen, S., Klein, C., Krauss, H.-W., Lohaus, L., Lowke, D.,
    Mazanec, O., … Mechtcherine, V. (2020). Interlaboratory study on rheological properties
    of cement pastes and reference substances: comparability of measurements performed
    with different rheometers and measurement geometries. <i>Materials and Structures</i>.
    <a href="https://doi.org/10.1617/s11527-020-01477-w">https://doi.org/10.1617/s11527-020-01477-w</a>'
  bibtex: '@article{Haist_Link_Nicia_Leinitz_Baumert_von Bronk_Cotardo_Eslami Pirharati_Fataei_Garrecht_et
    al._2020, title={Interlaboratory study on rheological properties of cement pastes
    and reference substances: comparability of measurements performed with different
    rheometers and measurement geometries}, DOI={<a href="https://doi.org/10.1617/s11527-020-01477-w">10.1617/s11527-020-01477-w</a>},
    journal={Materials and Structures}, author={Haist, Michael and Link, Julian and
    Nicia, David and Leinitz, Sarah and Baumert, Christian and von Bronk, Tabea and
    Cotardo, Dario and Eslami Pirharati, Mahmoud and Fataei, Shirin and Garrecht,
    Harald and et al.}, year={2020} }'
  chicago: 'Haist, Michael, Julian Link, David Nicia, Sarah Leinitz, Christian Baumert,
    Tabea von Bronk, Dario Cotardo, et al. “Interlaboratory Study on Rheological Properties
    of Cement Pastes and Reference Substances: Comparability of Measurements Performed
    with Different Rheometers and Measurement Geometries.” <i>Materials and Structures</i>,
    2020. <a href="https://doi.org/10.1617/s11527-020-01477-w">https://doi.org/10.1617/s11527-020-01477-w</a>.'
  ieee: 'M. Haist <i>et al.</i>, “Interlaboratory study on rheological properties
    of cement pastes and reference substances: comparability of measurements performed
    with different rheometers and measurement geometries,” <i>Materials and Structures</i>,
    2020, doi: <a href="https://doi.org/10.1617/s11527-020-01477-w">10.1617/s11527-020-01477-w</a>.'
  mla: 'Haist, Michael, et al. “Interlaboratory Study on Rheological Properties of
    Cement Pastes and Reference Substances: Comparability of Measurements Performed
    with Different Rheometers and Measurement Geometries.” <i>Materials and Structures</i>,
    2020, doi:<a href="https://doi.org/10.1617/s11527-020-01477-w">10.1617/s11527-020-01477-w</a>.'
  short: M. Haist, J. Link, D. Nicia, S. Leinitz, C. Baumert, T. von Bronk, D. Cotardo,
    M. Eslami Pirharati, S. Fataei, H. Garrecht, C. Gehlen, I. Hauschildt, I. Ivanova,
    S. Jesinghausen, C. Klein, H.-W. Krauss, L. Lohaus, D. Lowke, O. Mazanec, S. Pawelczyk,
    U. Pott, N.W. Radebe, J.J. Riedmiller, H.-J. Schmid, W. Schmidt, E. Secrieru,
    D. Stephan, M. Thiedeitz, M. Wilhelm, V. Mechtcherine, Materials and Structures
    (2020).
date_created: 2021-09-13T05:22:51Z
date_updated: 2022-01-06T06:56:09Z
department:
- _id: '150'
doi: 10.1617/s11527-020-01477-w
language:
- iso: eng
publication: Materials and Structures
publication_identifier:
  issn:
  - 1359-5997
  - 1871-6873
publication_status: published
quality_controlled: '1'
status: public
title: 'Interlaboratory study on rheological properties of cement pastes and reference
  substances: comparability of measurements performed with different rheometers and
  measurement geometries'
type: journal_article
user_id: '38243'
year: '2020'
...
---
_id: '24183'
author:
- first_name: Elmar
  full_name: Moritzer, Elmar
  id: '20531'
  last_name: Moritzer
- first_name: M.
  full_name: Wortmann, M.
  last_name: Wortmann
- first_name: L.
  full_name: Sabantina, L.
  last_name: Sabantina
- first_name: M.
  full_name: Klocker, M.
  last_name: Klocker
- first_name: JR
  full_name: Mirasol, JR
  last_name: Mirasol
citation:
  ama: Moritzer E, Wortmann M, Sabantina L, Klocker M, Mirasol J. Stabilization of
    polyacrylonitrile nanofiber mats obtained by needleless electrospinning using
    dimethyl sulfoxide as solvent. <i>JOURNAL OF INDUSTRIAL TEXTILES</i>. 2020;(50):224-239.
  apa: Moritzer, E., Wortmann, M., Sabantina, L., Klocker, M., &#38; Mirasol, J. (2020).
    Stabilization of polyacrylonitrile nanofiber mats obtained by needleless electrospinning
    using dimethyl sulfoxide as solvent. <i>JOURNAL OF INDUSTRIAL TEXTILES</i>, <i>50</i>,
    224–239.
  bibtex: '@article{Moritzer_Wortmann_Sabantina_Klocker_Mirasol_2020, title={Stabilization
    of polyacrylonitrile nanofiber mats obtained by needleless electrospinning using
    dimethyl sulfoxide as solvent}, number={50}, journal={JOURNAL OF INDUSTRIAL TEXTILES},
    author={Moritzer, Elmar and Wortmann, M. and Sabantina, L. and Klocker, M. and
    Mirasol, JR}, year={2020}, pages={224–239} }'
  chicago: 'Moritzer, Elmar, M. Wortmann, L. Sabantina, M. Klocker, and JR Mirasol.
    “Stabilization of Polyacrylonitrile Nanofiber Mats Obtained by Needleless Electrospinning
    Using Dimethyl Sulfoxide as Solvent.” <i>JOURNAL OF INDUSTRIAL TEXTILES</i>, no.
    50 (2020): 224–39.'
  ieee: E. Moritzer, M. Wortmann, L. Sabantina, M. Klocker, and J. Mirasol, “Stabilization
    of polyacrylonitrile nanofiber mats obtained by needleless electrospinning using
    dimethyl sulfoxide as solvent,” <i>JOURNAL OF INDUSTRIAL TEXTILES</i>, no. 50,
    pp. 224–239, 2020.
  mla: Moritzer, Elmar, et al. “Stabilization of Polyacrylonitrile Nanofiber Mats
    Obtained by Needleless Electrospinning Using Dimethyl Sulfoxide as Solvent.” <i>JOURNAL
    OF INDUSTRIAL TEXTILES</i>, no. 50, 2020, pp. 224–39.
  short: E. Moritzer, M. Wortmann, L. Sabantina, M. Klocker, J. Mirasol, JOURNAL OF
    INDUSTRIAL TEXTILES (2020) 224–239.
date_created: 2021-09-13T07:21:52Z
date_updated: 2022-01-06T06:56:09Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
issue: '50'
language:
- iso: eng
page: 224-239
publication: JOURNAL OF INDUSTRIAL TEXTILES
status: public
title: Stabilization of polyacrylonitrile nanofiber mats obtained by needleless electrospinning
  using dimethyl sulfoxide as solvent
type: journal_article
user_id: '44116'
year: '2020'
...
---
_id: '24184'
author:
- first_name: Elmar
  full_name: Moritzer, Elmar
  id: '20531'
  last_name: Moritzer
- first_name: Frederik Marvin
  full_name: Mühlhoff, Frederik Marvin
  id: '41312'
  last_name: Mühlhoff
- first_name: Erhard
  full_name: Krampe, Erhard
  last_name: Krampe
- first_name: Ella
  full_name: Lochbaum, Ella
  last_name: Lochbaum
citation:
  ama: Moritzer E, Mühlhoff FM, Krampe E, Lochbaum E. 2K-Haftverbunde aus originär
    inkompatiblen Kunststoffen. <i>Plastverarbeiter</i>. 2020;(07/20):20-23.
  apa: Moritzer, E., Mühlhoff, F. M., Krampe, E., &#38; Lochbaum, E. (2020). 2K-Haftverbunde
    aus originär inkompatiblen Kunststoffen. <i>Plastverarbeiter</i>, <i>07/20</i>,
    20–23.
  bibtex: '@article{Moritzer_Mühlhoff_Krampe_Lochbaum_2020, title={2K-Haftverbunde
    aus originär inkompatiblen Kunststoffen}, number={07/20}, journal={Plastverarbeiter},
    author={Moritzer, Elmar and Mühlhoff, Frederik Marvin and Krampe, Erhard and Lochbaum,
    Ella}, year={2020}, pages={20–23} }'
  chicago: 'Moritzer, Elmar, Frederik Marvin Mühlhoff, Erhard Krampe, and Ella Lochbaum.
    “2K-Haftverbunde Aus Originär Inkompatiblen Kunststoffen.” <i>Plastverarbeiter</i>,
    no. 07/20 (2020): 20–23.'
  ieee: E. Moritzer, F. M. Mühlhoff, E. Krampe, and E. Lochbaum, “2K-Haftverbunde
    aus originär inkompatiblen Kunststoffen,” <i>Plastverarbeiter</i>, no. 07/20,
    pp. 20–23, 2020.
  mla: Moritzer, Elmar, et al. “2K-Haftverbunde Aus Originär Inkompatiblen Kunststoffen.”
    <i>Plastverarbeiter</i>, no. 07/20, 2020, pp. 20–23.
  short: E. Moritzer, F.M. Mühlhoff, E. Krampe, E. Lochbaum, Plastverarbeiter (2020)
    20–23.
date_created: 2021-09-13T07:33:53Z
date_updated: 2022-01-06T06:56:09Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
issue: 07/20
language:
- iso: eng
page: 20-23
publication: Plastverarbeiter
publication_identifier:
  unknown:
  - 0032-1338
status: public
title: 2K-Haftverbunde aus originär inkompatiblen Kunststoffen
type: journal_article
user_id: '44116'
year: '2020'
...
---
_id: '24201'
author:
- first_name: Elmar
  full_name: Moritzer, Elmar
  id: '20531'
  last_name: Moritzer
- first_name: 'Stephan '
  full_name: 'Kartelmeyer, Stephan '
  last_name: Kartelmeyer
- first_name: 'Vincent '
  full_name: 'Hüttemann, Vincent '
  last_name: Hüttemann
citation:
  ama: 'Moritzer E, Kartelmeyer S, Hüttemann V. Additive Manufactured Heat Pipe Injection
    Mould Element. In: <i>Direct Digital Manufacturing Conference 2020</i>. ; 2020.'
  apa: Moritzer, E., Kartelmeyer, S., &#38; Hüttemann, V. (2020). Additive Manufactured
    Heat Pipe Injection Mould Element. <i>Direct Digital Manufacturing Conference
    2020</i>. Direct Digital Manufacturing Conference 2020, Berlin.
  bibtex: '@inproceedings{Moritzer_Kartelmeyer_Hüttemann_2020, place={Berlin}, title={Additive
    Manufactured Heat Pipe Injection Mould Element}, booktitle={Direct Digital Manufacturing
    Conference 2020}, author={Moritzer, Elmar and Kartelmeyer, Stephan  and Hüttemann,
    Vincent }, year={2020} }'
  chicago: Moritzer, Elmar, Stephan  Kartelmeyer, and Vincent  Hüttemann. “Additive
    Manufactured Heat Pipe Injection Mould Element.” In <i>Direct Digital Manufacturing
    Conference 2020</i>. Berlin, 2020.
  ieee: E. Moritzer, S. Kartelmeyer, and V. Hüttemann, “Additive Manufactured Heat
    Pipe Injection Mould Element,” presented at the Direct Digital Manufacturing Conference
    2020, Berlin, 2020.
  mla: Moritzer, Elmar, et al. “Additive Manufactured Heat Pipe Injection Mould Element.”
    <i>Direct Digital Manufacturing Conference 2020</i>, 2020.
  short: 'E. Moritzer, S. Kartelmeyer, V. Hüttemann, in: Direct Digital Manufacturing
    Conference 2020, Berlin, 2020.'
conference:
  location: Berlin
  name: Direct Digital Manufacturing Conference 2020
date_created: 2021-09-13T07:47:08Z
date_updated: 2022-01-06T06:56:10Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
place: Berlin
publication: Direct Digital Manufacturing Conference 2020
status: public
title: Additive Manufactured Heat Pipe Injection Mould Element
type: conference
user_id: '44116'
year: '2020'
...
---
_id: '24203'
author:
- first_name: Elmar
  full_name: Moritzer, Elmar
  id: '20531'
  last_name: Moritzer
- first_name: Johannes
  full_name: Hillemeyer, Johannes
  id: '27285'
  last_name: Hillemeyer
citation:
  ama: 'Moritzer E, Hillemeyer J. Additiveteile Direktverschrauben. In: <i>6. Fachkonferenz
    3D-Druck in Der Automobielindustrie</i>. ; 2020.'
  apa: Moritzer, E., &#38; Hillemeyer, J. (2020). Additiveteile Direktverschrauben.
    <i>6. Fachkonferenz 3D-Druck in Der Automobielindustrie</i>. 6. Fachkonferenz
    3D-Druck in der Automobielindustrie, Hamburg.
  bibtex: '@inproceedings{Moritzer_Hillemeyer_2020, place={Hamburg}, title={Additiveteile
    Direktverschrauben}, booktitle={6. Fachkonferenz 3D-Druck in der Automobielindustrie},
    author={Moritzer, Elmar and Hillemeyer, Johannes}, year={2020} }'
  chicago: Moritzer, Elmar, and Johannes Hillemeyer. “Additiveteile Direktverschrauben.”
    In <i>6. Fachkonferenz 3D-Druck in Der Automobielindustrie</i>. Hamburg, 2020.
  ieee: E. Moritzer and J. Hillemeyer, “Additiveteile Direktverschrauben,” presented
    at the 6. Fachkonferenz 3D-Druck in der Automobielindustrie, Hamburg, 2020.
  mla: Moritzer, Elmar, and Johannes Hillemeyer. “Additiveteile Direktverschrauben.”
    <i>6. Fachkonferenz 3D-Druck in Der Automobielindustrie</i>, 2020.
  short: 'E. Moritzer, J. Hillemeyer, in: 6. Fachkonferenz 3D-Druck in Der Automobielindustrie,
    Hamburg, 2020.'
conference:
  location: Hamburg
  name: 6. Fachkonferenz 3D-Druck in der Automobielindustrie
date_created: 2021-09-13T07:50:26Z
date_updated: 2022-01-06T06:56:13Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
place: Hamburg
publication: 6. Fachkonferenz 3D-Druck in der Automobielindustrie
status: public
title: Additiveteile Direktverschrauben
type: conference
user_id: '44116'
year: '2020'
...
---
_id: '24204'
author:
- first_name: Volker
  full_name: Schöppner, Volker
  id: '20530'
  last_name: Schöppner
- first_name: M.
  full_name: Dörner, M.
  last_name: Dörner
- first_name: C.
  full_name: Marschik, C.
  last_name: Marschik
citation:
  ama: Schöppner V, Dörner M, Marschik C. <i>ANALYSIS OF THE ADVANTAGEOUS PROCESS
    AND MIXING BEHAVIOUR OF WAVE-DISPERSION SCREWS IN SINGLE SCREW EXTRUSION</i>.;
    2020.
  apa: Schöppner, V., Dörner, M., &#38; Marschik, C. (2020). <i>ANALYSIS OF THE ADVANTAGEOUS
    PROCESS AND MIXING BEHAVIOUR OF WAVE-DISPERSION SCREWS IN SINGLE SCREW EXTRUSION</i>.
  bibtex: '@book{Schöppner_Dörner_Marschik_2020, title={ANALYSIS OF THE ADVANTAGEOUS
    PROCESS AND MIXING BEHAVIOUR OF WAVE-DISPERSION SCREWS IN SINGLE SCREW EXTRUSION},
    author={Schöppner, Volker and Dörner, M. and Marschik, C.}, year={2020} }'
  chicago: Schöppner, Volker, M. Dörner, and C. Marschik. <i>ANALYSIS OF THE ADVANTAGEOUS
    PROCESS AND MIXING BEHAVIOUR OF WAVE-DISPERSION SCREWS IN SINGLE SCREW EXTRUSION</i>,
    2020.
  ieee: V. Schöppner, M. Dörner, and C. Marschik, <i>ANALYSIS OF THE ADVANTAGEOUS
    PROCESS AND MIXING BEHAVIOUR OF WAVE-DISPERSION SCREWS IN SINGLE SCREW EXTRUSION</i>.
    2020.
  mla: Schöppner, Volker, et al. <i>ANALYSIS OF THE ADVANTAGEOUS PROCESS AND MIXING
    BEHAVIOUR OF WAVE-DISPERSION SCREWS IN SINGLE SCREW EXTRUSION</i>. 2020.
  short: V. Schöppner, M. Dörner, C. Marschik, ANALYSIS OF THE ADVANTAGEOUS PROCESS
    AND MIXING BEHAVIOUR OF WAVE-DISPERSION SCREWS IN SINGLE SCREW EXTRUSION, 2020.
date_created: 2021-09-13T07:54:29Z
date_updated: 2022-01-06T06:56:13Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
status: public
title: ANALYSIS OF THE ADVANTAGEOUS PROCESS AND MIXING BEHAVIOUR OF WAVE-DISPERSION
  SCREWS IN SINGLE SCREW EXTRUSION
type: misc
user_id: '44116'
year: '2020'
...
---
_id: '24206'
author:
- first_name: Elmar
  full_name: Moritzer, Elmar
  id: '20531'
  last_name: Moritzer
- first_name: Johannes
  full_name: Hillemeyer, Johannes
  id: '27285'
  last_name: Hillemeyer
citation:
  ama: 'Moritzer E, Hillemeyer J. Ansatz zur sicheren Direktverschraubung additiv
    gefertigter Einschraubtuben. In: <i>10. Gemeinschaftskolloquium</i>. ; 2020.'
  apa: Moritzer, E., &#38; Hillemeyer, J. (2020). Ansatz zur sicheren Direktverschraubung
    additiv gefertigter Einschraubtuben. <i>10. Gemeinschaftskolloquium</i>. 10. Gemeinschaftskolloquium,
    WebKolloquium (Deutschland).
  bibtex: '@inproceedings{Moritzer_Hillemeyer_2020, title={Ansatz zur sicheren Direktverschraubung
    additiv gefertigter Einschraubtuben}, booktitle={10. Gemeinschaftskolloquium},
    author={Moritzer, Elmar and Hillemeyer, Johannes}, year={2020} }'
  chicago: Moritzer, Elmar, and Johannes Hillemeyer. “Ansatz Zur Sicheren Direktverschraubung
    Additiv Gefertigter Einschraubtuben.” In <i>10. Gemeinschaftskolloquium</i>, 2020.
  ieee: E. Moritzer and J. Hillemeyer, “Ansatz zur sicheren Direktverschraubung additiv
    gefertigter Einschraubtuben,” presented at the 10. Gemeinschaftskolloquium, WebKolloquium
    (Deutschland), 2020.
  mla: Moritzer, Elmar, and Johannes Hillemeyer. “Ansatz Zur Sicheren Direktverschraubung
    Additiv Gefertigter Einschraubtuben.” <i>10. Gemeinschaftskolloquium</i>, 2020.
  short: 'E. Moritzer, J. Hillemeyer, in: 10. Gemeinschaftskolloquium, 2020.'
conference:
  location: WebKolloquium (Deutschland)
  name: 10. Gemeinschaftskolloquium
date_created: 2021-09-13T08:01:31Z
date_updated: 2022-01-06T06:56:13Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
publication: 10. Gemeinschaftskolloquium
status: public
title: Ansatz zur sicheren Direktverschraubung additiv gefertigter Einschraubtuben
type: conference
user_id: '44116'
year: '2020'
...
---
_id: '24207'
author:
- first_name: Volker
  full_name: Schöppner, Volker
  id: '20530'
  last_name: Schöppner
- first_name: M.
  full_name: Dörner, M.
  last_name: Dörner
- first_name: C.
  full_name: Marschik, C.
  last_name: Marschik
- first_name: W.
  full_name: Roland, W.
  last_name: Roland
- first_name: S.
  full_name: Schaufler, S.
  last_name: Schaufler
- first_name: G.
  full_name: Steinbichler, G.
  last_name: Steinbichler
citation:
  ama: 'Schöppner V, Dörner M, Marschik C, Roland W, Schaufler S, Steinbichler G.
    Application of Network Analysis to Flow Systems with Alternating Wave Channels:
    Part B. (Superimposed Drag-Pressure Flows in Extrusion). <i>Polymers</i>. 2020;(12(9)):1900.'
  apa: 'Schöppner, V., Dörner, M., Marschik, C., Roland, W., Schaufler, S., &#38;
    Steinbichler, G. (2020). Application of Network Analysis to Flow Systems with
    Alternating Wave Channels: Part B. (Superimposed Drag-Pressure Flows in Extrusion).
    <i>Polymers</i>, <i>12(9)</i>, 1900.'
  bibtex: '@article{Schöppner_Dörner_Marschik_Roland_Schaufler_Steinbichler_2020,
    title={Application of Network Analysis to Flow Systems with Alternating Wave Channels:
    Part B. (Superimposed Drag-Pressure Flows in Extrusion)}, number={12(9)}, journal={Polymers},
    author={Schöppner, Volker and Dörner, M. and Marschik, C. and Roland, W. and Schaufler,
    S. and Steinbichler, G.}, year={2020}, pages={1900} }'
  chicago: 'Schöppner, Volker, M. Dörner, C. Marschik, W. Roland, S. Schaufler, and
    G. Steinbichler. “Application of Network Analysis to Flow Systems with Alternating
    Wave Channels: Part B. (Superimposed Drag-Pressure Flows in Extrusion).” <i>Polymers</i>,
    no. 12(9) (2020): 1900.'
  ieee: 'V. Schöppner, M. Dörner, C. Marschik, W. Roland, S. Schaufler, and G. Steinbichler,
    “Application of Network Analysis to Flow Systems with Alternating Wave Channels:
    Part B. (Superimposed Drag-Pressure Flows in Extrusion),” <i>Polymers</i>, no.
    12(9), p. 1900, 2020.'
  mla: 'Schöppner, Volker, et al. “Application of Network Analysis to Flow Systems
    with Alternating Wave Channels: Part B. (Superimposed Drag-Pressure Flows in Extrusion).”
    <i>Polymers</i>, no. 12(9), 2020, p. 1900.'
  short: V. Schöppner, M. Dörner, C. Marschik, W. Roland, S. Schaufler, G. Steinbichler,
    Polymers (2020) 1900.
date_created: 2021-09-13T08:08:25Z
date_updated: 2022-01-06T06:56:13Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
issue: 12(9)
language:
- iso: eng
page: '1900'
publication: Polymers
status: public
title: 'Application of Network Analysis to Flow Systems with Alternating Wave Channels:
  Part B. (Superimposed Drag-Pressure Flows in Extrusion)'
type: journal_article
user_id: '44116'
year: '2020'
...
---
_id: '24213'
author:
- first_name: Elmar
  full_name: Moritzer, Elmar
  id: '20531'
  last_name: Moritzer
- first_name: M.
  full_name: Wittke, M.
  last_name: Wittke
citation:
  ama: 'Moritzer E, Wittke M. CONTEXT OF FIBER LENGTH DISTRIBUTION, HOMOGENEITY AND
    MECHANICAL PROPERTIES IN DIRECT COMPOUNDING INJECTION MOLDING OF FIBER REINFORCED
    THERMOPLASTICS. In: <i>Annual Technical Conference of the Society of Plastics
    Engineers (ANTEC) 2020</i>. ; 2020.'
  apa: Moritzer, E., &#38; Wittke, M. (2020). CONTEXT OF FIBER LENGTH DISTRIBUTION,
    HOMOGENEITY AND MECHANICAL PROPERTIES IN DIRECT COMPOUNDING INJECTION MOLDING
    OF FIBER REINFORCED THERMOPLASTICS. <i>Annual Technical Conference of the Society
    of Plastics Engineers (ANTEC) 2020</i>. Annual Technical Conference of the Society
    of Plastics Engineers (ANTEC) 2020, Digital.
  bibtex: '@inproceedings{Moritzer_Wittke_2020, title={CONTEXT OF FIBER LENGTH DISTRIBUTION,
    HOMOGENEITY AND MECHANICAL PROPERTIES IN DIRECT COMPOUNDING INJECTION MOLDING
    OF FIBER REINFORCED THERMOPLASTICS}, booktitle={Annual Technical Conference of
    the Society of Plastics Engineers (ANTEC) 2020}, author={Moritzer, Elmar and Wittke,
    M.}, year={2020} }'
  chicago: Moritzer, Elmar, and M. Wittke. “CONTEXT OF FIBER LENGTH DISTRIBUTION,
    HOMOGENEITY AND MECHANICAL PROPERTIES IN DIRECT COMPOUNDING INJECTION MOLDING
    OF FIBER REINFORCED THERMOPLASTICS.” In <i>Annual Technical Conference of the
    Society of Plastics Engineers (ANTEC) 2020</i>, 2020.
  ieee: E. Moritzer and M. Wittke, “CONTEXT OF FIBER LENGTH DISTRIBUTION, HOMOGENEITY
    AND MECHANICAL PROPERTIES IN DIRECT COMPOUNDING INJECTION MOLDING OF FIBER REINFORCED
    THERMOPLASTICS,” presented at the Annual Technical Conference of the Society of
    Plastics Engineers (ANTEC) 2020, Digital, 2020.
  mla: Moritzer, Elmar, and M. Wittke. “CONTEXT OF FIBER LENGTH DISTRIBUTION, HOMOGENEITY
    AND MECHANICAL PROPERTIES IN DIRECT COMPOUNDING INJECTION MOLDING OF FIBER REINFORCED
    THERMOPLASTICS.” <i>Annual Technical Conference of the Society of Plastics Engineers
    (ANTEC) 2020</i>, 2020.
  short: 'E. Moritzer, M. Wittke, in: Annual Technical Conference of the Society of
    Plastics Engineers (ANTEC) 2020, 2020.'
conference:
  location: Digital
  name: Annual Technical Conference of the Society of Plastics Engineers (ANTEC) 2020
date_created: 2021-09-13T08:20:39Z
date_updated: 2022-01-06T06:56:13Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
publication: Annual Technical Conference of the Society of Plastics Engineers (ANTEC)
  2020
status: public
title: CONTEXT OF FIBER LENGTH DISTRIBUTION, HOMOGENEITY AND MECHANICAL PROPERTIES
  IN DIRECT COMPOUNDING INJECTION MOLDING OF FIBER REINFORCED THERMOPLASTICS
type: conference
user_id: '44116'
year: '2020'
...
---
_id: '24228'
author:
- first_name: Elmar
  full_name: Moritzer, Elmar
  id: '20531'
  last_name: Moritzer
- first_name: Dimitri
  full_name: Krassmann, Dimitri
  id: '41916'
  last_name: Krassmann
citation:
  ama: 'Moritzer E, Krassmann D. Development of a New Joining Technology for Hybrid
    Joints of Sheet Metal and Continuous Fiber-Reinforced Thermoplastics. In: <i>73rd
    Annual Assembly of the International Institute of Welding (IIW)</i>. ; 2020.'
  apa: Moritzer, E., &#38; Krassmann, D. (2020). Development of a New Joining Technology
    for Hybrid Joints of Sheet Metal and Continuous Fiber-Reinforced Thermoplastics.
    <i>73rd Annual Assembly of the International Institute of Welding (IIW)</i>. 73rd
    Annual Assembly of the International Institute of Welding (IIW), Online.
  bibtex: '@inproceedings{Moritzer_Krassmann_2020, place={Online}, title={Development
    of a New Joining Technology for Hybrid Joints of Sheet Metal and Continuous Fiber-Reinforced
    Thermoplastics}, booktitle={73rd Annual Assembly of the International Institute
    of Welding (IIW)}, author={Moritzer, Elmar and Krassmann, Dimitri}, year={2020}
    }'
  chicago: Moritzer, Elmar, and Dimitri Krassmann. “Development of a New Joining Technology
    for Hybrid Joints of Sheet Metal and Continuous Fiber-Reinforced Thermoplastics.”
    In <i>73rd Annual Assembly of the International Institute of Welding (IIW)</i>.
    Online, 2020.
  ieee: E. Moritzer and D. Krassmann, “Development of a New Joining Technology for
    Hybrid Joints of Sheet Metal and Continuous Fiber-Reinforced Thermoplastics,”
    presented at the 73rd Annual Assembly of the International Institute of Welding
    (IIW), Online, 2020.
  mla: Moritzer, Elmar, and Dimitri Krassmann. “Development of a New Joining Technology
    for Hybrid Joints of Sheet Metal and Continuous Fiber-Reinforced Thermoplastics.”
    <i>73rd Annual Assembly of the International Institute of Welding (IIW)</i>, 2020.
  short: 'E. Moritzer, D. Krassmann, in: 73rd Annual Assembly of the International
    Institute of Welding (IIW), Online, 2020.'
conference:
  location: Online
  name: 73rd Annual Assembly of the International Institute of Welding (IIW)
date_created: 2021-09-13T08:23:25Z
date_updated: 2022-01-06T06:56:13Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
place: Online
publication: 73rd Annual Assembly of the International Institute of Welding (IIW)
status: public
title: Development of a New Joining Technology for Hybrid Joints of Sheet Metal and
  Continuous Fiber-Reinforced Thermoplastics
type: conference
user_id: '44116'
year: '2020'
...