@article{23867,
  abstract     = {{The joining of plastics is required because component geometries are severely restricted in conventional manufacturing processes such as injection molding or extrusion. In addition to established processes such as hot plate welding, infrared welding, or vibration welding, hot gas butt welding is becoming more and more important industrially due to its advantages. The main benefits are the contactless heating process, the suitability for glass fiber reinforced, and high-temperature plastics as well as complex component geometries. However, various degradation phenomena can occur during the heating process used for economic reasons, due to the presence of oxygen in the air and to the high gas temperatures. In addition, the current patent situation suggests that welding with an oxidizing gas is not permissible depending on the material. On the other hand, however, there is experience from extrusion welding, with which long-term resistant weld seams can be produced using air. Investigations have shown that the same weld seam properties can be achieved with polypropylene using either air or nitrogen as the process gas. Experimental investigations have now been carried out on the suitability of different gases with regard to the weld seam quality when welding polyamides, which are generally regarded as more prone to oxidation. The results show that weld strengths are higher when nitrogen is used as process gas. However, equal weld strengths can be achieved with air and nitrogen when the material contains heat stabilizers.}},
  author       = {{Bialaschik, Max and Schöppner, Volker and Albrecht, Mirko and Gehde, Michael}},
  issn         = {{0043-2288}},
  journal      = {{Welding in the World}},
  pages        = {{1161--1169}},
  title        = {{{Influence of material degradation on weld seam quality in hot gas butt welding of polyamides}}},
  doi          = {{10.1007/s40194-021-01108-0}},
  year         = {{2021}},
}

@article{24555,
  author       = {{Moritzer, Elmar and Elsner, Christian Lennart and Schumacher, Christian}},
  issn         = {{0272-8397}},
  journal      = {{Polymer Composites}},
  number       = {{11}},
  pages        = {{6065--6079}},
  title        = {{{Investigation of Metal‐Polymer Composites Manufactured by Fused Deposition Modeling with Regard to Process Parameters}}},
  doi          = {{10.1002/pc.26285}},
  volume       = {{42}},
  year         = {{2021}},
}

@inproceedings{26821,
  author       = {{Wibbeke, Tim Michael and Bartley, Auerélie and Chudalla, Nick and Meschut, Gerson}},
  booktitle    = {{Fahrzeug + Karosserie und kfz-betrieb (Hrsg,); Tagungsband zu den Würzburger Karosserie- und Schadenstagen 22./23. Oktober 2021}},
  title        = {{{Fügen und Trennen von Kfz-Karosseriestrukturen in Leichtbauweise}}},
  year         = {{2021}},
}

@article{21814,
  author       = {{Gröger, Benjamin and Troschitz, Juliane and Vorderbrüggen, Julian and Vogel, Christian and Kupfer, Robert and Meschut, Gerson and Gude, Maik}},
  journal      = {{Materials}},
  publisher    = {{MDPI}},
  title        = {{{Clinching of Thermoplastic Composites and Metals—A Comparison of Three Novel Joining Technologies}}},
  doi          = {{https://doi.org/ 10.3390/ma14092286}},
  year         = {{2021}},
}

@article{28568,
  abstract     = {{<jats:title>Abstract</jats:title><jats:p>Recent developments in automotive and aircraft industry towards a multi-material design pose challenges for modern joining technologies due to different mechanical properties and material compositions of various materials such as composites and metals. Therefore, mechanical joining technologies like clinching are in the focus of current research activities. For multi-material joints of metals and thermoplastic composites thermally assisted clinching processes with advanced tool concepts are well developed. The material-specific properties of fibre-reinforced thermoplastics have a significant influence on the joining process and the resulting material structure in the joining zone. For this reason, it is important to investigate these influences in detail and to understand the phenomena occurring during the joining process. Additionally, this provides the basis for a validation of a numerical simulation of such joining processes. In this paper, the material structure in a joint resulting from a thermally assisted clinching process is investigated. The joining partners are an aluminium sheet and a thermoplastic composite (organo sheet). Using computed tomography enables a three-dimensional investigation that allows a detailed analysis of the phenomena in different joining stages and in the material structure of the finished joint. Consequently, this study provides a more detailed understanding of the material behavior of thermoplastic composites during thermally assisted clinching.</jats:p>}},
  author       = {{Gröger, Benjamin and Köhler, Daniel and Vorderbrüggen, Julian and Troschitz, Juliane and Kupfer, Robert and Meschut, Gerson and Gude, Maik}},
  issn         = {{0944-6524}},
  journal      = {{Production Engineering}},
  title        = {{{Computed tomography investigation of the material structure in clinch joints in aluminium fibre-reinforced thermoplastic sheets}}},
  doi          = {{10.1007/s11740-021-01091-x}},
  year         = {{2021}},
}

@article{24131,
  abstract     = {{<jats:p>Glass/carbon fiber reinforced plastic (GFRP/CFRP) and hybrid components have attracted increasing attention in lightweight applications. However, residual stresses induced in the manufacturing process of these components can result in warpage and, eventually, negatively affect the mechanical performance of the composite structures. In the present work, GFRP, CFRP, GFRP/steel and CFRP/steel hybrid components were manufactured through the prepreg-press-technology always employing the same process parameters. The residual stresses of these components were measured through the hole drilling method (HDM), based on an adequate formalism to evaluate the residual stresses for orthotropic materials including the calculation of the calibration coefficients via finite element analysis (FEA). In FEA, the real material lay-up and mechanical properties of the samples were considered. The warpage induced by residual stresses was measured after the samples were removed from the tool. The measured residual stresses and warpage of four different types of samples were compared and results were analyzed in depth. The results obtained can be extended to other hybrid materials and even could be used for designing multi-stable laminates for application in adaptive structures. Moreover, the effects of the drilling process parameters of HDM, e.g., the drilling speed, the drilling increment and the zero-depth setting, on the resulting residual stresses of GFRP were investigated. The reliability of residual stress measurements in GFRP using HDM was validated through mechanical bending tests. The conclusions concerning the choice of optimal drilling parameters for GFRP could be directly applied for other types of samples considered in the present work.</jats:p>}},
  author       = {{Wu, Tao and Tinkloh, Steffen Rainer and Tröster, Thomas and Zinn, Wolfgang and Niendorf, Thomas}},
  issn         = {{2075-4701}},
  journal      = {{Metals}},
  title        = {{{Measurement and Analysis of Residual Stresses and Warpage in Fiber Reinforced Plastic and Hybrid Components}}},
  doi          = {{10.3390/met11020335}},
  year         = {{2021}},
}

@article{21064,
  author       = {{Tinkloh, Steffen Rainer and Wu, Tao and Tröster, Thomas and Niendorf, Thomas}},
  issn         = {{2075-4701}},
  journal      = {{Metals}},
  title        = {{{The Effect of Fiber Waviness on the Residual Stress State and Its Prediction by the Hole Drilling Method in Fiber Metal Laminates: A Global-Local Finite Element Analysis}}},
  doi          = {{10.3390/met11010156}},
  year         = {{2021}},
}

@phdthesis{30849,
  author       = {{Henkenius, Carsten}},
  title        = {{{Entwurf netzfreundlicher Synchrongleichrichter mit integriertem Synchronwandler}}},
  doi          = {{10.17619/UNIPB/1-1109}},
  year         = {{2021}},
}

@article{22925,
  author       = {{Claes, Leander and Chatwell, René Spencer and Baumhögger, Elmar and Hetkämper, Tim and Zeipert, Henning and Vrabec, Jadran and Henning, Bernd}},
  issn         = {{0263-2241}},
  journal      = {{Measurement}},
  title        = {{{Measurement procedure for acoustic absorption and bulk viscosity of liquids}}},
  doi          = {{10.1016/j.measurement.2021.109919}},
  year         = {{2021}},
}

@inproceedings{21093,
  abstract     = {{Requirements for energy distribution networks are changing fast due to the growing share of renewable energy, increasing electrification, and novel consumer and asset technologies. Since uncertainties about future developments increase planning difficulty, flexibility potentials such as synergies between the electricity, gas, heat, and transport sector often remain unused. In this paper, we therefore present a novel module-based concept for a decision support system that helps distribution network planners to identify cross-sectoral synergies and to select optimal network assets such as transformers, cables, pipes, energy storage systems or energy conversion technology. The concept enables long-term transformation plans and supports distribution network planners in designing reliable, sustainable and cost-efficient distribution networks for future demands.}},
  author       = {{Kirchhoff, Jonas and Burmeister, Sascha Christian and Weskamp, Christoph and Engels, Gregor}},
  booktitle    = {{Energy Informatics and Electro Mobility ICT}},
  editor       = {{Breitner, Michael H. and Lehnhoff, Sebastian and Nieße, Astrid and Staudt, Philipp and Weinhardt, Christof and Werth, Oliver}},
  title        = {{{Towards a Decision Support System for Cross-Sectoral Energy Distribution Network Planning}}},
  year         = {{2021}},
}

@misc{30957,
  author       = {{Lammer, Christina}},
  title        = {{{Revolten in Gelb und Grün. In 'Rosa und Hannah. Das Blatt wenden' inspiriert Joke J. Hermsen für Krisenzeiten}}},
  year         = {{2021}},
}

@misc{31744,
  author       = {{Moritzer, Elmar and Hillemeyer, Johannes and Kramer, M. and Hopmann, C.}},
  booktitle    = {{Joining Plastics}},
  issn         = {{1864-3450}},
  pages        = {{94--103}},
  title        = {{{Designing of thermosetting plastic components  for direct screwing - Auslegung von Duroplastbauteilen zur Direktverschraubung}}},
  year         = {{2021}},
}

@misc{31740,
  author       = {{Moritzer, Elmar and Richters, Maximilian}},
  booktitle    = {{Journal of Applied Polymer Science}},
  number       = {{38}},
  title        = {{{ Characterization of wood-filled thermoplastic polyurethanes for the  injection molding process}}},
  volume       = {{138}},
  year         = {{2021}},
}

@inproceedings{31760,
  author       = {{Moritzer, Elmar and Krassmann, Dimitri and Brikmann, Johannes}},
  booktitle    = {{11. Fügetechnisches  Gemeinschaftskolloquium}},
  location     = {{Dresden}},
  title        = {{{Entwicklung der Spritzniettechnik als  werkstoffgerechtes Fügeverfahren für hybride Strukturen}}},
  year         = {{2021}},
}

@misc{31762,
  author       = {{Moritzer, Elmar and Jilg, J. and Rücker, Tobias}},
  booktitle    = {{Kunststoffe}},
  pages        = {{24--27}},
  title        = {{{Er kommt auf die Korngröße an, Mikrogranulat verbessert die  Verteilung feindisperser Füllstoffe in der Direktcompoundierung}}},
  year         = {{2021}},
}

@misc{31758,
  author       = {{Schöppner, Volker and Martens, Jan Hendrik}},
  booktitle    = {{Kunststoffe}},
  issn         = {{0023- 5563}},
  pages        = {{91--93}},
  title        = {{{Eine runde Sache}}},
  year         = {{2021}},
}

@inproceedings{31767,
  author       = {{Hopp, Matthias and Tölle, Lisa}},
  booktitle    = {{36th  International Conference of Polymer Processing Society (PPS)}},
  title        = {{{Influence of Fiber Content on the Fiber Dust Formation During Shredding for  Mechanical Recycling of Different Glass and Carbon Fiber Reinforced Thermoplastics}}},
  year         = {{2021}},
}

@misc{31765,
  author       = {{Moritzer, Elmar and Hillemeyer, Johannes and Lotzin, R.}},
  booktitle    = {{Kunststoffe}},
  issn         = {{0023-5563}},
  pages        = {{42-- 45}},
  title        = {{{Fügeelement angespritzt - Einfluss auf die Verbundfestigkeit  zwischen Organoblech und Schraubblindniet untersucht}}},
  year         = {{2021}},
}

@misc{31763,
  author       = {{Moritzer, Elmar and Wortmann, M. and Krieger, P. and Hüsgen, B. and Frese, N.}},
  booktitle    = {{ACS Omega}},
  title        = {{{Effect of Isocyanate Absorption on the  Mechanical Properties of Silicone Elastomers in Polyurethane Vacuum Casting}}},
  year         = {{2021}},
}

@inproceedings{31774,
  author       = {{Moritzer, Elmar and Wächter, Julian and Fuhrmann, C.}},
  booktitle    = {{23rd International Conference Materials}},
  isbn         = {{1314-7269}},
  location     = {{Burgas (Bulgarien)}},
  pages        = {{58-- 67}},
  title        = {{{ INVESTIGATION OF THE PROCESSABILITY OF DIFFERENT HIGHPERFORMANCE MATERIALS IN THE FDM PROCESS WITH REGARD TO THE SHRINKAGE BEHAVIOR}}},
  year         = {{2021}},
}