---
_id: '23867'
abstract:
- lang: eng
text: The joining of plastics is required because component geometries are severely
restricted in conventional manufacturing processes such as injection molding or
extrusion. In addition to established processes such as hot plate welding, infrared
welding, or vibration welding, hot gas butt welding is becoming more and more
important industrially due to its advantages. The main benefits are the contactless
heating process, the suitability for glass fiber reinforced, and high-temperature
plastics as well as complex component geometries. However, various degradation
phenomena can occur during the heating process used for economic reasons, due
to the presence of oxygen in the air and to the high gas temperatures. In addition,
the current patent situation suggests that welding with an oxidizing gas is not
permissible depending on the material. On the other hand, however, there is experience
from extrusion welding, with which long-term resistant weld seams can be produced
using air. Investigations have shown that the same weld seam properties can be
achieved with polypropylene using either air or nitrogen as the process gas. Experimental
investigations have now been carried out on the suitability of different gases
with regard to the weld seam quality when welding polyamides, which are generally
regarded as more prone to oxidation. The results show that weld strengths are
higher when nitrogen is used as process gas. However, equal weld strengths can
be achieved with air and nitrogen when the material contains heat stabilizers.
author:
- first_name: Max
full_name: Bialaschik, Max
id: '32297'
last_name: Bialaschik
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
- first_name: Mirko
full_name: Albrecht, Mirko
last_name: Albrecht
- first_name: Michael
full_name: Gehde, Michael
last_name: Gehde
citation:
ama: Bialaschik M, Schöppner V, Albrecht M, Gehde M. Influence of material degradation
on weld seam quality in hot gas butt welding of polyamides. Welding in the
World. Published online 2021:1161-1169. doi:10.1007/s40194-021-01108-0
apa: Bialaschik, M., Schöppner, V., Albrecht, M., & Gehde, M. (2021). Influence
of material degradation on weld seam quality in hot gas butt welding of polyamides.
Welding in the World, 1161–1169. https://doi.org/10.1007/s40194-021-01108-0
bibtex: '@article{Bialaschik_Schöppner_Albrecht_Gehde_2021, title={Influence of
material degradation on weld seam quality in hot gas butt welding of polyamides},
DOI={10.1007/s40194-021-01108-0},
journal={Welding in the World}, author={Bialaschik, Max and Schöppner, Volker
and Albrecht, Mirko and Gehde, Michael}, year={2021}, pages={1161–1169} }'
chicago: Bialaschik, Max, Volker Schöppner, Mirko Albrecht, and Michael Gehde. “Influence
of Material Degradation on Weld Seam Quality in Hot Gas Butt Welding of Polyamides.”
Welding in the World, 2021, 1161–69. https://doi.org/10.1007/s40194-021-01108-0.
ieee: 'M. Bialaschik, V. Schöppner, M. Albrecht, and M. Gehde, “Influence of material
degradation on weld seam quality in hot gas butt welding of polyamides,” Welding
in the World, pp. 1161–1169, 2021, doi: 10.1007/s40194-021-01108-0.'
mla: Bialaschik, Max, et al. “Influence of Material Degradation on Weld Seam Quality
in Hot Gas Butt Welding of Polyamides.” Welding in the World, 2021, pp.
1161–69, doi:10.1007/s40194-021-01108-0.
short: M. Bialaschik, V. Schöppner, M. Albrecht, M. Gehde, Welding in the World
(2021) 1161–1169.
date_created: 2021-09-07T11:32:27Z
date_updated: 2022-04-25T10:29:46Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
doi: 10.1007/s40194-021-01108-0
language:
- iso: eng
page: 1161-1169
popular_science: '1'
publication: Welding in the World
publication_identifier:
issn:
- 0043-2288
- 1878-6669
publication_status: published
quality_controlled: '1'
status: public
title: Influence of material degradation on weld seam quality in hot gas butt welding
of polyamides
type: journal_article
user_id: '32297'
year: '2021'
...
---
_id: '24555'
author:
- first_name: Elmar
full_name: Moritzer, Elmar
id: '20531'
last_name: Moritzer
- first_name: Christian Lennart
full_name: Elsner, Christian Lennart
id: '70729'
last_name: Elsner
- first_name: Christian
full_name: Schumacher, Christian
last_name: Schumacher
citation:
ama: Moritzer E, Elsner CL, Schumacher C. Investigation of Metal‐Polymer Composites
Manufactured by Fused Deposition Modeling with Regard to Process Parameters. Polymer
Composites. 2021;42(11):6065-6079. doi:10.1002/pc.26285
apa: Moritzer, E., Elsner, C. L., & Schumacher, C. (2021). Investigation of
Metal‐Polymer Composites Manufactured by Fused Deposition Modeling with Regard
to Process Parameters. Polymer Composites, 42(11), 6065–6079. https://doi.org/10.1002/pc.26285
bibtex: '@article{Moritzer_Elsner_Schumacher_2021, title={Investigation of Metal‐Polymer
Composites Manufactured by Fused Deposition Modeling with Regard to Process Parameters},
volume={42}, DOI={10.1002/pc.26285},
number={11}, journal={Polymer Composites}, author={Moritzer, Elmar and Elsner,
Christian Lennart and Schumacher, Christian}, year={2021}, pages={6065–6079} }'
chicago: 'Moritzer, Elmar, Christian Lennart Elsner, and Christian Schumacher. “Investigation
of Metal‐Polymer Composites Manufactured by Fused Deposition Modeling with Regard
to Process Parameters.” Polymer Composites 42, no. 11 (2021): 6065–79.
https://doi.org/10.1002/pc.26285.'
ieee: 'E. Moritzer, C. L. Elsner, and C. Schumacher, “Investigation of Metal‐Polymer
Composites Manufactured by Fused Deposition Modeling with Regard to Process Parameters,”
Polymer Composites, vol. 42, no. 11, pp. 6065–6079, 2021, doi: 10.1002/pc.26285.'
mla: Moritzer, Elmar, et al. “Investigation of Metal‐Polymer Composites Manufactured
by Fused Deposition Modeling with Regard to Process Parameters.” Polymer Composites,
vol. 42, no. 11, 2021, pp. 6065–79, doi:10.1002/pc.26285.
short: E. Moritzer, C.L. Elsner, C. Schumacher, Polymer Composites 42 (2021) 6065–6079.
date_created: 2021-09-16T11:44:48Z
date_updated: 2022-04-25T08:08:07Z
department:
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '9'
- _id: '321'
doi: 10.1002/pc.26285
intvolume: ' 42'
issue: '11'
language:
- iso: eng
page: 6065-6079
publication: Polymer Composites
publication_identifier:
issn:
- 0272-8397
- 1548-0569
publication_status: published
quality_controlled: '1'
status: public
title: Investigation of Metal‐Polymer Composites Manufactured by Fused Deposition
Modeling with Regard to Process Parameters
type: journal_article
user_id: '70729'
volume: 42
year: '2021'
...
---
_id: '26821'
author:
- first_name: Tim Michael
full_name: Wibbeke, Tim Michael
last_name: Wibbeke
- first_name: Auerélie
full_name: Bartley, Auerélie
last_name: Bartley
- first_name: Nick
full_name: Chudalla, Nick
id: '41235'
last_name: Chudalla
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Wibbeke TM, Bartley A, Chudalla N, Meschut G. Fügen und Trennen von Kfz-Karosseriestrukturen
in Leichtbauweise. In: Fahrzeug + Karosserie Und Kfz-Betrieb (Hrsg,); Tagungsband
Zu Den Würzburger Karosserie- Und Schadenstagen 22./23. Oktober 2021. ; 2021.'
apa: Wibbeke, T. M., Bartley, A., Chudalla, N., & Meschut, G. (2021). Fügen
und Trennen von Kfz-Karosseriestrukturen in Leichtbauweise. Fahrzeug + Karosserie
Und Kfz-Betrieb (Hrsg,); Tagungsband Zu Den Würzburger Karosserie- Und Schadenstagen
22./23. Oktober 2021.
bibtex: '@inproceedings{Wibbeke_Bartley_Chudalla_Meschut_2021, title={Fügen und
Trennen von Kfz-Karosseriestrukturen in Leichtbauweise}, booktitle={Fahrzeug +
Karosserie und kfz-betrieb (Hrsg,); Tagungsband zu den Würzburger Karosserie-
und Schadenstagen 22./23. Oktober 2021}, author={Wibbeke, Tim Michael and Bartley,
Auerélie and Chudalla, Nick and Meschut, Gerson}, year={2021} }'
chicago: Wibbeke, Tim Michael, Auerélie Bartley, Nick Chudalla, and Gerson Meschut.
“Fügen Und Trennen von Kfz-Karosseriestrukturen in Leichtbauweise.” In Fahrzeug
+ Karosserie Und Kfz-Betrieb (Hrsg,); Tagungsband Zu Den Würzburger Karosserie-
Und Schadenstagen 22./23. Oktober 2021, 2021.
ieee: T. M. Wibbeke, A. Bartley, N. Chudalla, and G. Meschut, “Fügen und Trennen
von Kfz-Karosseriestrukturen in Leichtbauweise,” 2021.
mla: Wibbeke, Tim Michael, et al. “Fügen Und Trennen von Kfz-Karosseriestrukturen
in Leichtbauweise.” Fahrzeug + Karosserie Und Kfz-Betrieb (Hrsg,); Tagungsband
Zu Den Würzburger Karosserie- Und Schadenstagen 22./23. Oktober 2021, 2021.
short: 'T.M. Wibbeke, A. Bartley, N. Chudalla, G. Meschut, in: Fahrzeug + Karosserie
Und Kfz-Betrieb (Hrsg,); Tagungsband Zu Den Würzburger Karosserie- Und Schadenstagen
22./23. Oktober 2021, 2021.'
date_created: 2021-10-25T12:05:22Z
date_updated: 2022-04-25T11:24:34Z
department:
- _id: '43'
- _id: '157'
language:
- iso: eng
publication: Fahrzeug + Karosserie und kfz-betrieb (Hrsg,); Tagungsband zu den Würzburger
Karosserie- und Schadenstagen 22./23. Oktober 2021
status: public
title: Fügen und Trennen von Kfz-Karosseriestrukturen in Leichtbauweise
type: conference
user_id: '41235'
year: '2021'
...
---
_id: '21814'
author:
- first_name: Benjamin
full_name: Gröger, Benjamin
last_name: Gröger
- first_name: Juliane
full_name: Troschitz, Juliane
last_name: Troschitz
- first_name: Julian
full_name: Vorderbrüggen, Julian
id: '36235'
last_name: Vorderbrüggen
- first_name: Christian
full_name: Vogel, Christian
last_name: Vogel
- first_name: Robert
full_name: Kupfer, Robert
last_name: Kupfer
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Maik
full_name: Gude, Maik
last_name: Gude
citation:
ama: Gröger B, Troschitz J, Vorderbrüggen J, et al. Clinching of Thermoplastic Composites
and Metals—A Comparison of Three Novel Joining Technologies. Materials.
Published online 2021. doi:https://doi.org/
10.3390/ma14092286
apa: Gröger, B., Troschitz, J., Vorderbrüggen, J., Vogel, C., Kupfer, R., Meschut,
G., & Gude, M. (2021). Clinching of Thermoplastic Composites and Metals—A
Comparison of Three Novel Joining Technologies. Materials. https://doi.org/ 10.3390/ma14092286
bibtex: '@article{Gröger_Troschitz_Vorderbrüggen_Vogel_Kupfer_Meschut_Gude_2021,
title={Clinching of Thermoplastic Composites and Metals—A Comparison of Three
Novel Joining Technologies}, DOI={https://doi.org/
10.3390/ma14092286}, journal={Materials}, publisher={MDPI}, author={Gröger,
Benjamin and Troschitz, Juliane and Vorderbrüggen, Julian and Vogel, Christian
and Kupfer, Robert and Meschut, Gerson and Gude, Maik}, year={2021} }'
chicago: Gröger, Benjamin, Juliane Troschitz, Julian Vorderbrüggen, Christian Vogel,
Robert Kupfer, Gerson Meschut, and Maik Gude. “Clinching of Thermoplastic Composites
and Metals—A Comparison of Three Novel Joining Technologies.” Materials,
2021. https://doi.org/ 10.3390/ma14092286.
ieee: 'B. Gröger et al., “Clinching of Thermoplastic Composites and Metals—A
Comparison of Three Novel Joining Technologies,” Materials, 2021, doi:
https://doi.org/ 10.3390/ma14092286.'
mla: Gröger, Benjamin, et al. “Clinching of Thermoplastic Composites and Metals—A
Comparison of Three Novel Joining Technologies.” Materials, MDPI, 2021,
doi:https://doi.org/ 10.3390/ma14092286.
short: B. Gröger, J. Troschitz, J. Vorderbrüggen, C. Vogel, R. Kupfer, G. Meschut,
M. Gude, Materials (2021).
date_created: 2021-04-28T13:47:18Z
date_updated: 2022-04-25T14:46:16Z
department:
- _id: '157'
doi: https://doi.org/ 10.3390/ma14092286
language:
- iso: eng
publication: Materials
publisher: MDPI
quality_controlled: '1'
status: public
title: Clinching of Thermoplastic Composites and Metals—A Comparison of Three Novel
Joining Technologies
type: journal_article
user_id: '36235'
year: '2021'
...
---
_id: '28568'
abstract:
- lang: eng
text: AbstractRecent developments in automotive
and aircraft industry towards a multi-material design pose challenges for modern
joining technologies due to different mechanical properties and material compositions
of various materials such as composites and metals. Therefore, mechanical joining
technologies like clinching are in the focus of current research activities. For
multi-material joints of metals and thermoplastic composites thermally assisted
clinching processes with advanced tool concepts are well developed. The material-specific
properties of fibre-reinforced thermoplastics have a significant influence on
the joining process and the resulting material structure in the joining zone.
For this reason, it is important to investigate these influences in detail and
to understand the phenomena occurring during the joining process. Additionally,
this provides the basis for a validation of a numerical simulation of such joining
processes. In this paper, the material structure in a joint resulting from a thermally
assisted clinching process is investigated. The joining partners are an aluminium
sheet and a thermoplastic composite (organo sheet). Using computed tomography
enables a three-dimensional investigation that allows a detailed analysis of the
phenomena in different joining stages and in the material structure of the finished
joint. Consequently, this study provides a more detailed understanding of the
material behavior of thermoplastic composites during thermally assisted clinching.
author:
- first_name: Benjamin
full_name: Gröger, Benjamin
last_name: Gröger
- first_name: Daniel
full_name: Köhler, Daniel
last_name: Köhler
- first_name: Julian
full_name: Vorderbrüggen, Julian
id: '36235'
last_name: Vorderbrüggen
- first_name: Juliane
full_name: Troschitz, Juliane
last_name: Troschitz
- first_name: Robert
full_name: Kupfer, Robert
last_name: Kupfer
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Maik
full_name: Gude, Maik
last_name: Gude
citation:
ama: Gröger B, Köhler D, Vorderbrüggen J, et al. Computed tomography investigation
of the material structure in clinch joints in aluminium fibre-reinforced thermoplastic
sheets. Production Engineering. Published online 2021. doi:10.1007/s11740-021-01091-x
apa: Gröger, B., Köhler, D., Vorderbrüggen, J., Troschitz, J., Kupfer, R., Meschut,
G., & Gude, M. (2021). Computed tomography investigation of the material structure
in clinch joints in aluminium fibre-reinforced thermoplastic sheets. Production
Engineering. https://doi.org/10.1007/s11740-021-01091-x
bibtex: '@article{Gröger_Köhler_Vorderbrüggen_Troschitz_Kupfer_Meschut_Gude_2021,
title={Computed tomography investigation of the material structure in clinch joints
in aluminium fibre-reinforced thermoplastic sheets}, DOI={10.1007/s11740-021-01091-x},
journal={Production Engineering}, author={Gröger, Benjamin and Köhler, Daniel
and Vorderbrüggen, Julian and Troschitz, Juliane and Kupfer, Robert and Meschut,
Gerson and Gude, Maik}, year={2021} }'
chicago: Gröger, Benjamin, Daniel Köhler, Julian Vorderbrüggen, Juliane Troschitz,
Robert Kupfer, Gerson Meschut, and Maik Gude. “Computed Tomography Investigation
of the Material Structure in Clinch Joints in Aluminium Fibre-Reinforced Thermoplastic
Sheets.” Production Engineering, 2021. https://doi.org/10.1007/s11740-021-01091-x.
ieee: 'B. Gröger et al., “Computed tomography investigation of the material
structure in clinch joints in aluminium fibre-reinforced thermoplastic sheets,”
Production Engineering, 2021, doi: 10.1007/s11740-021-01091-x.'
mla: Gröger, Benjamin, et al. “Computed Tomography Investigation of the Material
Structure in Clinch Joints in Aluminium Fibre-Reinforced Thermoplastic Sheets.”
Production Engineering, 2021, doi:10.1007/s11740-021-01091-x.
short: B. Gröger, D. Köhler, J. Vorderbrüggen, J. Troschitz, R. Kupfer, G. Meschut,
M. Gude, Production Engineering (2021).
date_created: 2021-12-10T14:25:29Z
date_updated: 2022-04-25T14:48:52Z
department:
- _id: '157'
doi: 10.1007/s11740-021-01091-x
language:
- iso: eng
publication: Production Engineering
publication_identifier:
issn:
- 0944-6524
- 1863-7353
publication_status: published
quality_controlled: '1'
status: public
title: Computed tomography investigation of the material structure in clinch joints
in aluminium fibre-reinforced thermoplastic sheets
type: journal_article
user_id: '36235'
year: '2021'
...
---
_id: '24131'
abstract:
- lang: eng
text: Glass/carbon fiber reinforced plastic (GFRP/CFRP) and hybrid components
have attracted increasing attention in lightweight applications. However, residual
stresses induced in the manufacturing process of these components can result in
warpage and, eventually, negatively affect the mechanical performance of the composite
structures. In the present work, GFRP, CFRP, GFRP/steel and CFRP/steel hybrid
components were manufactured through the prepreg-press-technology always employing
the same process parameters. The residual stresses of these components were measured
through the hole drilling method (HDM), based on an adequate formalism to evaluate
the residual stresses for orthotropic materials including the calculation of the
calibration coefficients via finite element analysis (FEA). In FEA, the real material
lay-up and mechanical properties of the samples were considered. The warpage induced
by residual stresses was measured after the samples were removed from the tool.
The measured residual stresses and warpage of four different types of samples
were compared and results were analyzed in depth. The results obtained can be
extended to other hybrid materials and even could be used for designing multi-stable
laminates for application in adaptive structures. Moreover, the effects of the
drilling process parameters of HDM, e.g., the drilling speed, the drilling increment
and the zero-depth setting, on the resulting residual stresses of GFRP were investigated.
The reliability of residual stress measurements in GFRP using HDM was validated
through mechanical bending tests. The conclusions concerning the choice of optimal
drilling parameters for GFRP could be directly applied for other types of samples
considered in the present work.
article_number: '335'
author:
- first_name: Tao
full_name: Wu, Tao
last_name: Wu
- first_name: Steffen Rainer
full_name: Tinkloh, Steffen Rainer
id: '72722'
last_name: Tinkloh
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: Wolfgang
full_name: Zinn, Wolfgang
last_name: Zinn
- first_name: Thomas
full_name: Niendorf, Thomas
last_name: Niendorf
citation:
ama: Wu T, Tinkloh SR, Tröster T, Zinn W, Niendorf T. Measurement and Analysis of
Residual Stresses and Warpage in Fiber Reinforced Plastic and Hybrid Components.
Metals. Published online 2021. doi:10.3390/met11020335
apa: Wu, T., Tinkloh, S. R., Tröster, T., Zinn, W., & Niendorf, T. (2021). Measurement
and Analysis of Residual Stresses and Warpage in Fiber Reinforced Plastic and
Hybrid Components. Metals, Article 335. https://doi.org/10.3390/met11020335
bibtex: '@article{Wu_Tinkloh_Tröster_Zinn_Niendorf_2021, title={Measurement and
Analysis of Residual Stresses and Warpage in Fiber Reinforced Plastic and Hybrid
Components}, DOI={10.3390/met11020335},
number={335}, journal={Metals}, author={Wu, Tao and Tinkloh, Steffen Rainer and
Tröster, Thomas and Zinn, Wolfgang and Niendorf, Thomas}, year={2021} }'
chicago: Wu, Tao, Steffen Rainer Tinkloh, Thomas Tröster, Wolfgang Zinn, and Thomas
Niendorf. “Measurement and Analysis of Residual Stresses and Warpage in Fiber
Reinforced Plastic and Hybrid Components.” Metals, 2021. https://doi.org/10.3390/met11020335.
ieee: 'T. Wu, S. R. Tinkloh, T. Tröster, W. Zinn, and T. Niendorf, “Measurement
and Analysis of Residual Stresses and Warpage in Fiber Reinforced Plastic and
Hybrid Components,” Metals, Art. no. 335, 2021, doi: 10.3390/met11020335.'
mla: Wu, Tao, et al. “Measurement and Analysis of Residual Stresses and Warpage
in Fiber Reinforced Plastic and Hybrid Components.” Metals, 335, 2021,
doi:10.3390/met11020335.
short: T. Wu, S.R. Tinkloh, T. Tröster, W. Zinn, T. Niendorf, Metals (2021).
date_created: 2021-09-10T08:25:01Z
date_updated: 2022-04-26T06:34:21Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.3390/met11020335
language:
- iso: eng
publication: Metals
publication_identifier:
issn:
- 2075-4701
publication_status: published
quality_controlled: '1'
status: public
title: Measurement and Analysis of Residual Stresses and Warpage in Fiber Reinforced
Plastic and Hybrid Components
type: journal_article
user_id: '72722'
year: '2021'
...
---
_id: '21064'
article_number: '156'
author:
- first_name: Steffen Rainer
full_name: Tinkloh, Steffen Rainer
id: '72722'
last_name: Tinkloh
- first_name: Tao
full_name: Wu, Tao
last_name: Wu
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: Thomas
full_name: Niendorf, Thomas
last_name: Niendorf
citation:
ama: 'Tinkloh SR, Wu T, Tröster T, Niendorf T. The Effect of Fiber Waviness on the
Residual Stress State and Its Prediction by the Hole Drilling Method in Fiber
Metal Laminates: A Global-Local Finite Element Analysis. Metals. Published
online 2021. doi:10.3390/met11010156'
apa: 'Tinkloh, S. R., Wu, T., Tröster, T., & Niendorf, T. (2021). The Effect
of Fiber Waviness on the Residual Stress State and Its Prediction by the Hole
Drilling Method in Fiber Metal Laminates: A Global-Local Finite Element Analysis.
Metals, Article 156. https://doi.org/10.3390/met11010156'
bibtex: '@article{Tinkloh_Wu_Tröster_Niendorf_2021, title={The Effect of Fiber Waviness
on the Residual Stress State and Its Prediction by the Hole Drilling Method in
Fiber Metal Laminates: A Global-Local Finite Element Analysis}, DOI={10.3390/met11010156},
number={156}, journal={Metals}, author={Tinkloh, Steffen Rainer and Wu, Tao and
Tröster, Thomas and Niendorf, Thomas}, year={2021} }'
chicago: 'Tinkloh, Steffen Rainer, Tao Wu, Thomas Tröster, and Thomas Niendorf.
“The Effect of Fiber Waviness on the Residual Stress State and Its Prediction
by the Hole Drilling Method in Fiber Metal Laminates: A Global-Local Finite Element
Analysis.” Metals, 2021. https://doi.org/10.3390/met11010156.'
ieee: 'S. R. Tinkloh, T. Wu, T. Tröster, and T. Niendorf, “The Effect of Fiber Waviness
on the Residual Stress State and Its Prediction by the Hole Drilling Method in
Fiber Metal Laminates: A Global-Local Finite Element Analysis,” Metals,
Art. no. 156, 2021, doi: 10.3390/met11010156.'
mla: 'Tinkloh, Steffen Rainer, et al. “The Effect of Fiber Waviness on the Residual
Stress State and Its Prediction by the Hole Drilling Method in Fiber Metal Laminates:
A Global-Local Finite Element Analysis.” Metals, 156, 2021, doi:10.3390/met11010156.'
short: S.R. Tinkloh, T. Wu, T. Tröster, T. Niendorf, Metals (2021).
date_created: 2021-01-24T16:12:14Z
date_updated: 2022-04-26T06:34:47Z
department:
- _id: '149'
- _id: '9'
- _id: '321'
doi: 10.3390/met11010156
language:
- iso: eng
project:
- _id: '52'
name: Computing Resources Provided by the Paderborn Center for Parallel Computing
publication: Metals
publication_identifier:
issn:
- 2075-4701
publication_status: published
quality_controlled: '1'
status: public
title: 'The Effect of Fiber Waviness on the Residual Stress State and Its Prediction
by the Hole Drilling Method in Fiber Metal Laminates: A Global-Local Finite Element
Analysis'
type: journal_article
user_id: '72722'
year: '2021'
...
---
_id: '30849'
author:
- first_name: Carsten
full_name: Henkenius, Carsten
last_name: Henkenius
citation:
ama: Henkenius C. Entwurf netzfreundlicher Synchrongleichrichter mit integriertem
Synchronwandler.; 2021. doi:10.17619/UNIPB/1-1109
apa: Henkenius, C. (2021). Entwurf netzfreundlicher Synchrongleichrichter mit
integriertem Synchronwandler. https://doi.org/10.17619/UNIPB/1-1109
bibtex: '@book{Henkenius_2021, title={Entwurf netzfreundlicher Synchrongleichrichter
mit integriertem Synchronwandler}, DOI={10.17619/UNIPB/1-1109},
author={Henkenius, Carsten}, year={2021} }'
chicago: Henkenius, Carsten. Entwurf netzfreundlicher Synchrongleichrichter mit
integriertem Synchronwandler, 2021. https://doi.org/10.17619/UNIPB/1-1109.
ieee: C. Henkenius, Entwurf netzfreundlicher Synchrongleichrichter mit integriertem
Synchronwandler. 2021.
mla: Henkenius, Carsten. Entwurf netzfreundlicher Synchrongleichrichter mit integriertem
Synchronwandler. 2021, doi:10.17619/UNIPB/1-1109.
short: C. Henkenius, Entwurf netzfreundlicher Synchrongleichrichter mit integriertem
Synchronwandler, 2021.
date_created: 2022-04-07T10:10:13Z
date_updated: 2022-04-26T08:59:22Z
department:
- _id: '52'
doi: 10.17619/UNIPB/1-1109
language:
- iso: ger
status: public
title: Entwurf netzfreundlicher Synchrongleichrichter mit integriertem Synchronwandler
type: dissertation
user_id: '71353'
year: '2021'
...
---
_id: '22925'
article_number: '109919'
author:
- first_name: Leander
full_name: Claes, Leander
id: '11829'
last_name: Claes
orcid: 0000-0002-4393-268X
- first_name: René Spencer
full_name: Chatwell, René Spencer
last_name: Chatwell
- first_name: Elmar
full_name: Baumhögger, Elmar
id: '15164'
last_name: Baumhögger
- first_name: Tim
full_name: Hetkämper, Tim
id: '38123'
last_name: Hetkämper
- first_name: Henning
full_name: Zeipert, Henning
id: '32580'
last_name: Zeipert
- first_name: Jadran
full_name: Vrabec, Jadran
last_name: Vrabec
- first_name: Bernd
full_name: Henning, Bernd
id: '213'
last_name: Henning
citation:
ama: Claes L, Chatwell RS, Baumhögger E, et al. Measurement procedure for acoustic
absorption and bulk viscosity of liquids. Measurement. Published online
2021. doi:10.1016/j.measurement.2021.109919
apa: Claes, L., Chatwell, R. S., Baumhögger, E., Hetkämper, T., Zeipert, H., Vrabec,
J., & Henning, B. (2021). Measurement procedure for acoustic absorption and
bulk viscosity of liquids. Measurement, Article 109919. https://doi.org/10.1016/j.measurement.2021.109919
bibtex: '@article{Claes_Chatwell_Baumhögger_Hetkämper_Zeipert_Vrabec_Henning_2021,
title={Measurement procedure for acoustic absorption and bulk viscosity of liquids},
DOI={10.1016/j.measurement.2021.109919},
number={109919}, journal={Measurement}, author={Claes, Leander and Chatwell, René
Spencer and Baumhögger, Elmar and Hetkämper, Tim and Zeipert, Henning and Vrabec,
Jadran and Henning, Bernd}, year={2021} }'
chicago: Claes, Leander, René Spencer Chatwell, Elmar Baumhögger, Tim Hetkämper,
Henning Zeipert, Jadran Vrabec, and Bernd Henning. “Measurement Procedure for
Acoustic Absorption and Bulk Viscosity of Liquids.” Measurement, 2021.
https://doi.org/10.1016/j.measurement.2021.109919.
ieee: 'L. Claes et al., “Measurement procedure for acoustic absorption and
bulk viscosity of liquids,” Measurement, Art. no. 109919, 2021, doi: 10.1016/j.measurement.2021.109919.'
mla: Claes, Leander, et al. “Measurement Procedure for Acoustic Absorption and Bulk
Viscosity of Liquids.” Measurement, 109919, 2021, doi:10.1016/j.measurement.2021.109919.
short: L. Claes, R.S. Chatwell, E. Baumhögger, T. Hetkämper, H. Zeipert, J. Vrabec,
B. Henning, Measurement (2021).
date_created: 2021-08-02T13:42:06Z
date_updated: 2022-04-26T09:01:07Z
department:
- _id: '49'
- _id: '155'
doi: 10.1016/j.measurement.2021.109919
language:
- iso: eng
project:
- _id: '52'
name: Computing Resources Provided by the Paderborn Center for Parallel Computing
publication: Measurement
publication_identifier:
issn:
- 0263-2241
publication_status: published
status: public
title: Measurement procedure for acoustic absorption and bulk viscosity of liquids
type: journal_article
user_id: '15164'
year: '2021'
...
---
_id: '21093'
abstract:
- lang: eng
text: Requirements for energy distribution networks are changing fast due to the
growing share of renewable energy, increasing electrification, and novel consumer
and asset technologies. Since uncertainties about future developments increase
planning difficulty, flexibility potentials such as synergies between the electricity,
gas, heat, and transport sector often remain unused. In this paper, we therefore
present a novel module-based concept for a decision support system that helps
distribution network planners to identify cross-sectoral synergies and to select
optimal network assets such as transformers, cables, pipes, energy storage systems
or energy conversion technology. The concept enables long-term transformation
plans and supports distribution network planners in designing reliable, sustainable
and cost-efficient distribution networks for future demands.
author:
- first_name: Jonas
full_name: Kirchhoff, Jonas
id: '39928'
last_name: Kirchhoff
- first_name: Sascha Christian
full_name: Burmeister, Sascha Christian
id: '32685'
last_name: Burmeister
- first_name: Christoph
full_name: Weskamp, Christoph
last_name: Weskamp
- first_name: Gregor
full_name: Engels, Gregor
id: '107'
last_name: Engels
citation:
ama: 'Kirchhoff J, Burmeister SC, Weskamp C, Engels G. Towards a Decision Support
System for Cross-Sectoral Energy Distribution Network Planning. In: Breitner MH,
Lehnhoff S, Nieße A, Staudt P, Weinhardt C, Werth O, eds. Energy Informatics
and Electro Mobility ICT. ; 2021.'
apa: Kirchhoff, J., Burmeister, S. C., Weskamp, C., & Engels, G. (2021). Towards
a Decision Support System for Cross-Sectoral Energy Distribution Network Planning.
In M. H. Breitner, S. Lehnhoff, A. Nieße, P. Staudt, C. Weinhardt, & O. Werth
(Eds.), Energy Informatics and Electro Mobility ICT.
bibtex: '@inproceedings{Kirchhoff_Burmeister_Weskamp_Engels_2021, title={Towards
a Decision Support System for Cross-Sectoral Energy Distribution Network Planning},
booktitle={Energy Informatics and Electro Mobility ICT}, author={Kirchhoff, Jonas
and Burmeister, Sascha Christian and Weskamp, Christoph and Engels, Gregor}, editor={Breitner,
Michael H. and Lehnhoff, Sebastian and Nieße, Astrid and Staudt, Philipp and Weinhardt,
Christof and Werth, Oliver}, year={2021} }'
chicago: Kirchhoff, Jonas, Sascha Christian Burmeister, Christoph Weskamp, and Gregor
Engels. “Towards a Decision Support System for Cross-Sectoral Energy Distribution
Network Planning.” In Energy Informatics and Electro Mobility ICT, edited
by Michael H. Breitner, Sebastian Lehnhoff, Astrid Nieße, Philipp Staudt, Christof
Weinhardt, and Oliver Werth, 2021.
ieee: J. Kirchhoff, S. C. Burmeister, C. Weskamp, and G. Engels, “Towards a Decision
Support System for Cross-Sectoral Energy Distribution Network Planning,” in Energy
Informatics and Electro Mobility ICT, 2021.
mla: Kirchhoff, Jonas, et al. “Towards a Decision Support System for Cross-Sectoral
Energy Distribution Network Planning.” Energy Informatics and Electro Mobility
ICT, edited by Michael H. Breitner et al., 2021.
short: 'J. Kirchhoff, S.C. Burmeister, C. Weskamp, G. Engels, in: M.H. Breitner,
S. Lehnhoff, A. Nieße, P. Staudt, C. Weinhardt, O. Werth (Eds.), Energy Informatics
and Electro Mobility ICT, 2021.'
conference:
end_date: 2021-03-11
name: Pre-Conference 16. International Congress on Wirtschaftsinformatik Universität
Duisburg-Essen
start_date: 2021-03-08
date_created: 2021-01-28T10:05:44Z
date_updated: 2022-04-30T13:48:49Z
department:
- _id: '534'
- _id: '66'
- _id: '277'
editor:
- first_name: Michael H.
full_name: Breitner, Michael H.
last_name: Breitner
- first_name: Sebastian
full_name: Lehnhoff, Sebastian
last_name: Lehnhoff
- first_name: Astrid
full_name: Nieße, Astrid
last_name: Nieße
- first_name: Philipp
full_name: Staudt, Philipp
last_name: Staudt
- first_name: Christof
full_name: Weinhardt, Christof
last_name: Weinhardt
- first_name: Oliver
full_name: Werth, Oliver
last_name: Werth
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://oops.uni-oldenburg.de/5084/7/proceedings_ow_sto_2021.pdf#page=41
oa: '1'
publication: Energy Informatics and Electro Mobility ICT
status: public
title: Towards a Decision Support System for Cross-Sectoral Energy Distribution Network
Planning
type: conference
user_id: '39928'
year: '2021'
...
---
_id: '30957'
author:
- first_name: Christina
full_name: Lammer, Christina
id: '84580'
last_name: Lammer
citation:
ama: Lammer C. Revolten in Gelb und Grün. In “Rosa und Hannah. Das Blatt wenden”
inspiriert Joke J. Hermsen für Krisenzeiten. Published online 2021.
apa: Lammer, C. (2021). Revolten in Gelb und Grün. In “Rosa und Hannah. Das Blatt
wenden” inspiriert Joke J. Hermsen für Krisenzeiten.
bibtex: '@article{Lammer_2021, title={Revolten in Gelb und Grün. In “Rosa und Hannah.
Das Blatt wenden” inspiriert Joke J. Hermsen für Krisenzeiten}, author={Lammer,
Christina}, year={2021} }'
chicago: Lammer, Christina. “Revolten in Gelb Und Grün. In ‘Rosa Und Hannah. Das
Blatt Wenden’ Inspiriert Joke J. Hermsen Für Krisenzeiten,” 2021.
ieee: C. Lammer, “Revolten in Gelb und Grün. In ‘Rosa und Hannah. Das Blatt wenden’
inspiriert Joke J. Hermsen für Krisenzeiten.” 2021.
mla: Lammer, Christina. Revolten in Gelb Und Grün. In “Rosa Und Hannah. Das Blatt
Wenden” Inspiriert Joke J. Hermsen Für Krisenzeiten. 2021.
short: C. Lammer, (2021).
date_created: 2022-04-27T08:12:22Z
date_updated: 2022-05-04T13:22:17Z
language:
- iso: eng
status: public
title: Revolten in Gelb und Grün. In 'Rosa und Hannah. Das Blatt wenden' inspiriert
Joke J. Hermsen für Krisenzeiten
type: review
user_id: '84580'
year: '2021'
...
---
_id: '31744'
author:
- first_name: Elmar
full_name: Moritzer, Elmar
id: '20531'
last_name: Moritzer
- first_name: Johannes
full_name: Hillemeyer, Johannes
id: '27285'
last_name: Hillemeyer
- first_name: M.
full_name: Kramer, M.
last_name: Kramer
- first_name: C.
full_name: Hopmann, C.
last_name: Hopmann
citation:
ama: Moritzer E, Hillemeyer J, Kramer M, Hopmann C. Designing of thermosetting plastic
components for direct screwing - Auslegung von Duroplastbauteilen zur Direktverschraubung.
Joining Plastics. 2021:94-103.
apa: Moritzer, E., Hillemeyer, J., Kramer, M., & Hopmann, C. (2021). Designing
of thermosetting plastic components for direct screwing - Auslegung von Duroplastbauteilen
zur Direktverschraubung. Joining Plastics, 94–103.
bibtex: '@article{Moritzer_Hillemeyer_Kramer_Hopmann_2021, title={Designing of thermosetting
plastic components for direct screwing - Auslegung von Duroplastbauteilen zur
Direktverschraubung}, journal={Joining Plastics}, author={Moritzer, Elmar and
Hillemeyer, Johannes and Kramer, M. and Hopmann, C.}, year={2021}, pages={94–103}
}'
chicago: Moritzer, Elmar, Johannes Hillemeyer, M. Kramer, and C. Hopmann. “Designing
of Thermosetting Plastic Components for Direct Screwing - Auslegung von Duroplastbauteilen
Zur Direktverschraubung.” Joining Plastics, 2021.
ieee: E. Moritzer, J. Hillemeyer, M. Kramer, and C. Hopmann, “Designing of thermosetting
plastic components for direct screwing - Auslegung von Duroplastbauteilen zur
Direktverschraubung,” Joining Plastics, pp. 94–103, 2021.
mla: Moritzer, Elmar, et al. “Designing of Thermosetting Plastic Components for
Direct Screwing - Auslegung von Duroplastbauteilen Zur Direktverschraubung.” Joining
Plastics, 2021, pp. 94–103.
short: E. Moritzer, J. Hillemeyer, M. Kramer, C. Hopmann, Joining Plastics (2021)
94–103.
date_created: 2022-06-07T09:34:45Z
date_updated: 2022-06-07T09:34:48Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
page: 94-103
publication: Joining Plastics
publication_date: '2021'
publication_identifier:
issn:
- 1864-3450
status: public
title: Designing of thermosetting plastic components for direct screwing - Auslegung
von Duroplastbauteilen zur Direktverschraubung
type: newspaper_article
user_id: '44116'
year: '2021'
...
---
_id: '31740'
author:
- first_name: Elmar
full_name: Moritzer, Elmar
id: '20531'
last_name: Moritzer
- first_name: Maximilian
full_name: Richters, Maximilian
id: '38221'
last_name: Richters
citation:
ama: Moritzer E, Richters M. Characterization of wood-filled thermoplastic polyurethanes
for the injection molding process. Journal of Applied Polymer Science.
2021.
apa: Moritzer, E., & Richters, M. (2021). Characterization of wood-filled thermoplastic
polyurethanes for the injection molding process. Journal of Applied Polymer
Science, 138(38).
bibtex: '@article{Moritzer_Richters_2021, title={ Characterization of wood-filled
thermoplastic polyurethanes for the injection molding process}, volume={138},
number={38}, journal={Journal of Applied Polymer Science}, author={Moritzer, Elmar
and Richters, Maximilian}, year={2021} }'
chicago: Moritzer, Elmar, and Maximilian Richters. “ Characterization of Wood-Filled
Thermoplastic Polyurethanes for the Injection Molding Process.” Journal of
Applied Polymer Science, 2021.
ieee: E. Moritzer and M. Richters, “ Characterization of wood-filled thermoplastic
polyurethanes for the injection molding process,” Journal of Applied Polymer
Science, vol. 138, no. 38, 2021.
mla: Moritzer, Elmar, and Maximilian Richters. “ Characterization of Wood-Filled
Thermoplastic Polyurethanes for the Injection Molding Process.” Journal of
Applied Polymer Science, vol. 138, no. 38, 2021.
short: E. Moritzer, M. Richters, Journal of Applied Polymer Science 138 (2021).
date_created: 2022-06-07T09:32:45Z
date_updated: 2022-06-07T09:32:54Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
intvolume: ' 138'
issue: '38'
language:
- iso: eng
publication: Journal of Applied Polymer Science
publication_date: '2021'
status: public
title: ' Characterization of wood-filled thermoplastic polyurethanes for the injection
molding process'
type: newspaper_article
user_id: '44116'
volume: 138
year: '2021'
...
---
_id: '31760'
author:
- first_name: Elmar
full_name: Moritzer, Elmar
id: '20531'
last_name: Moritzer
- first_name: Dimitri
full_name: Krassmann, Dimitri
id: '41916'
last_name: Krassmann
- first_name: Johannes
full_name: Brikmann, Johannes
last_name: Brikmann
citation:
ama: 'Moritzer E, Krassmann D, Brikmann J. Entwicklung der Spritzniettechnik als
werkstoffgerechtes Fügeverfahren für hybride Strukturen. In: 11. Fügetechnisches
Gemeinschaftskolloquium. ; 2021.'
apa: Moritzer, E., Krassmann, D., & Brikmann, J. (2021). Entwicklung der Spritzniettechnik
als werkstoffgerechtes Fügeverfahren für hybride Strukturen. 11. Fügetechnisches
Gemeinschaftskolloquium. 11. Fügetechnisches Gemeinschaftskolloquium, Dresden.
bibtex: '@inproceedings{Moritzer_Krassmann_Brikmann_2021, place={Dresden}, title={Entwicklung
der Spritzniettechnik als werkstoffgerechtes Fügeverfahren für hybride Strukturen},
booktitle={11. Fügetechnisches Gemeinschaftskolloquium}, author={Moritzer, Elmar
and Krassmann, Dimitri and Brikmann, Johannes}, year={2021} }'
chicago: Moritzer, Elmar, Dimitri Krassmann, and Johannes Brikmann. “Entwicklung
Der Spritzniettechnik Als Werkstoffgerechtes Fügeverfahren Für Hybride Strukturen.”
In 11. Fügetechnisches Gemeinschaftskolloquium. Dresden, 2021.
ieee: E. Moritzer, D. Krassmann, and J. Brikmann, “Entwicklung der Spritzniettechnik
als werkstoffgerechtes Fügeverfahren für hybride Strukturen,” presented at the
11. Fügetechnisches Gemeinschaftskolloquium, Dresden, 2021.
mla: Moritzer, Elmar, et al. “Entwicklung Der Spritzniettechnik Als Werkstoffgerechtes
Fügeverfahren Für Hybride Strukturen.” 11. Fügetechnisches Gemeinschaftskolloquium,
2021.
short: 'E. Moritzer, D. Krassmann, J. Brikmann, in: 11. Fügetechnisches Gemeinschaftskolloquium,
Dresden, 2021.'
conference:
location: Dresden
name: 11. Fügetechnisches Gemeinschaftskolloquium
date_created: 2022-06-07T09:41:17Z
date_updated: 2022-06-07T09:41:23Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
place: Dresden
publication: 11. Fügetechnisches Gemeinschaftskolloquium
status: public
title: Entwicklung der Spritzniettechnik als werkstoffgerechtes Fügeverfahren für
hybride Strukturen
type: conference
user_id: '44116'
year: '2021'
...
---
_id: '31762'
author:
- first_name: Elmar
full_name: Moritzer, Elmar
id: '20531'
last_name: Moritzer
- first_name: J.
full_name: Jilg, J.
last_name: Jilg
- first_name: Tobias
full_name: Rücker, Tobias
last_name: Rücker
citation:
ama: Moritzer E, Jilg J, Rücker T. Er kommt auf die Korngröße an, Mikrogranulat
verbessert die Verteilung feindisperser Füllstoffe in der Direktcompoundierung.
Kunststoffe. 2021:24-27.
apa: Moritzer, E., Jilg, J., & Rücker, T. (2021). Er kommt auf die Korngröße
an, Mikrogranulat verbessert die Verteilung feindisperser Füllstoffe in der Direktcompoundierung.
Kunststoffe, 24–27.
bibtex: '@article{Moritzer_Jilg_Rücker_2021, title={Er kommt auf die Korngröße an,
Mikrogranulat verbessert die Verteilung feindisperser Füllstoffe in der Direktcompoundierung},
journal={Kunststoffe}, author={Moritzer, Elmar and Jilg, J. and Rücker, Tobias},
year={2021}, pages={24–27} }'
chicago: Moritzer, Elmar, J. Jilg, and Tobias Rücker. “Er Kommt Auf Die Korngröße
an, Mikrogranulat Verbessert Die Verteilung Feindisperser Füllstoffe in Der Direktcompoundierung.”
Kunststoffe, 2021.
ieee: E. Moritzer, J. Jilg, and T. Rücker, “Er kommt auf die Korngröße an, Mikrogranulat
verbessert die Verteilung feindisperser Füllstoffe in der Direktcompoundierung,”
Kunststoffe, pp. 24–27, 2021.
mla: Moritzer, Elmar, et al. “Er Kommt Auf Die Korngröße an, Mikrogranulat Verbessert
Die Verteilung Feindisperser Füllstoffe in Der Direktcompoundierung.” Kunststoffe,
2021, pp. 24–27.
short: E. Moritzer, J. Jilg, T. Rücker, Kunststoffe (2021) 24–27.
date_created: 2022-06-07T09:42:58Z
date_updated: 2022-06-07T09:43:06Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
page: 24-27
publication: Kunststoffe
publication_date: '2021'
status: public
title: Er kommt auf die Korngröße an, Mikrogranulat verbessert die Verteilung feindisperser
Füllstoffe in der Direktcompoundierung
type: newspaper_article
user_id: '44116'
year: '2021'
...
---
_id: '31758'
author:
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
- first_name: Jan Hendrik
full_name: Martens, Jan Hendrik
id: '38293'
last_name: Martens
citation:
ama: Schöppner V, Martens JH. Eine runde Sache. Kunststoffe. 2021:91-93.
apa: Schöppner, V., & Martens, J. H. (2021). Eine runde Sache. Kunststoffe,
91–93.
bibtex: '@article{Schöppner_Martens_2021, title={Eine runde Sache}, journal={Kunststoffe},
author={Schöppner, Volker and Martens, Jan Hendrik}, year={2021}, pages={91–93}
}'
chicago: Schöppner, Volker, and Jan Hendrik Martens. “Eine Runde Sache.” Kunststoffe,
2021.
ieee: V. Schöppner and J. H. Martens, “Eine runde Sache,” Kunststoffe, pp.
91–93, 2021.
mla: Schöppner, Volker, and Jan Hendrik Martens. “Eine Runde Sache.” Kunststoffe,
2021, pp. 91–93.
short: V. Schöppner, J.H. Martens, Kunststoffe (2021) 91–93.
date_created: 2022-06-07T09:39:25Z
date_updated: 2022-06-07T09:39:31Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
page: 91-93
publication: Kunststoffe
publication_date: '2021'
publication_identifier:
issn:
- 0023- 5563
status: public
title: Eine runde Sache
type: newspaper_article
user_id: '44116'
year: '2021'
...
---
_id: '31767'
author:
- first_name: Matthias
full_name: Hopp, Matthias
id: '13142'
last_name: Hopp
- first_name: Lisa
full_name: Tölle, Lisa
id: '82465'
last_name: Tölle
citation:
ama: 'Hopp M, Tölle L. Influence of Fiber Content on the Fiber Dust Formation During
Shredding for Mechanical Recycling of Different Glass and Carbon Fiber Reinforced
Thermoplastics. In: 36th International Conference of Polymer Processing Society
(PPS). ; 2021.'
apa: Hopp, M., & Tölle, L. (2021). Influence of Fiber Content on the Fiber Dust
Formation During Shredding for Mechanical Recycling of Different Glass and Carbon
Fiber Reinforced Thermoplastics. 36th International Conference of Polymer
Processing Society (PPS). 36th International Conference of Polymer Processing
Society (PPS).
bibtex: '@inproceedings{Hopp_Tölle_2021, title={Influence of Fiber Content on the
Fiber Dust Formation During Shredding for Mechanical Recycling of Different Glass
and Carbon Fiber Reinforced Thermoplastics}, booktitle={36th International Conference
of Polymer Processing Society (PPS)}, author={Hopp, Matthias and Tölle, Lisa},
year={2021} }'
chicago: Hopp, Matthias, and Lisa Tölle. “Influence of Fiber Content on the Fiber
Dust Formation During Shredding for Mechanical Recycling of Different Glass and
Carbon Fiber Reinforced Thermoplastics.” In 36th International Conference
of Polymer Processing Society (PPS), 2021.
ieee: M. Hopp and L. Tölle, “Influence of Fiber Content on the Fiber Dust Formation
During Shredding for Mechanical Recycling of Different Glass and Carbon Fiber
Reinforced Thermoplastics,” presented at the 36th International Conference of
Polymer Processing Society (PPS), 2021.
mla: Hopp, Matthias, and Lisa Tölle. “Influence of Fiber Content on the Fiber Dust
Formation During Shredding for Mechanical Recycling of Different Glass and Carbon
Fiber Reinforced Thermoplastics.” 36th International Conference of Polymer
Processing Society (PPS), 2021.
short: 'M. Hopp, L. Tölle, in: 36th International Conference of Polymer Processing
Society (PPS), 2021.'
conference:
name: 36th International Conference of Polymer Processing Society (PPS)
date_created: 2022-06-07T09:48:32Z
date_updated: 2022-06-07T09:48:36Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
publication: 36th International Conference of Polymer Processing Society (PPS)
status: public
title: Influence of Fiber Content on the Fiber Dust Formation During Shredding for Mechanical
Recycling of Different Glass and Carbon Fiber Reinforced Thermoplastics
type: conference
user_id: '44116'
year: '2021'
...
---
_id: '31765'
author:
- first_name: Elmar
full_name: Moritzer, Elmar
id: '20531'
last_name: Moritzer
- first_name: Johannes
full_name: Hillemeyer, Johannes
id: '27285'
last_name: Hillemeyer
- first_name: R.
full_name: Lotzin, R.
last_name: Lotzin
citation:
ama: Moritzer E, Hillemeyer J, Lotzin R. Fügeelement angespritzt - Einfluss auf
die Verbundfestigkeit zwischen Organoblech und Schraubblindniet untersucht. Kunststoffe.
2021:42-45.
apa: Moritzer, E., Hillemeyer, J., & Lotzin, R. (2021). Fügeelement angespritzt
- Einfluss auf die Verbundfestigkeit zwischen Organoblech und Schraubblindniet
untersucht. Kunststoffe, 42–45.
bibtex: '@article{Moritzer_Hillemeyer_Lotzin_2021, title={Fügeelement angespritzt
- Einfluss auf die Verbundfestigkeit zwischen Organoblech und Schraubblindniet
untersucht}, journal={Kunststoffe}, author={Moritzer, Elmar and Hillemeyer, Johannes
and Lotzin, R.}, year={2021}, pages={42–45} }'
chicago: Moritzer, Elmar, Johannes Hillemeyer, and R. Lotzin. “Fügeelement Angespritzt
- Einfluss Auf Die Verbundfestigkeit Zwischen Organoblech Und Schraubblindniet
Untersucht.” Kunststoffe, 2021.
ieee: E. Moritzer, J. Hillemeyer, and R. Lotzin, “Fügeelement angespritzt - Einfluss
auf die Verbundfestigkeit zwischen Organoblech und Schraubblindniet untersucht,”
Kunststoffe, pp. 42–45, 2021.
mla: Moritzer, Elmar, et al. “Fügeelement Angespritzt - Einfluss Auf Die Verbundfestigkeit
Zwischen Organoblech Und Schraubblindniet Untersucht.” Kunststoffe, 2021,
pp. 42–45.
short: E. Moritzer, J. Hillemeyer, R. Lotzin, Kunststoffe (2021) 42–45.
date_created: 2022-06-07T09:46:32Z
date_updated: 2022-06-07T09:46:51Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
page: 42- 45
publication: Kunststoffe
publication_date: '2021'
publication_identifier:
issn:
- 0023-5563
status: public
title: Fügeelement angespritzt - Einfluss auf die Verbundfestigkeit zwischen Organoblech
und Schraubblindniet untersucht
type: newspaper_article
user_id: '44116'
year: '2021'
...
---
_id: '31763'
author:
- first_name: Elmar
full_name: Moritzer, Elmar
id: '20531'
last_name: Moritzer
- first_name: M.
full_name: Wortmann, M.
last_name: Wortmann
- first_name: P.
full_name: Krieger, P.
last_name: Krieger
- first_name: B.
full_name: Hüsgen, B.
last_name: Hüsgen
- first_name: N.
full_name: Frese, N.
last_name: Frese
citation:
ama: Moritzer E, Wortmann M, Krieger P, Hüsgen B, Frese N. Effect of Isocyanate
Absorption on the Mechanical Properties of Silicone Elastomers in Polyurethane
Vacuum Casting. ACS Omega. 2021.
apa: Moritzer, E., Wortmann, M., Krieger, P., Hüsgen, B., & Frese, N. (2021).
Effect of Isocyanate Absorption on the Mechanical Properties of Silicone Elastomers
in Polyurethane Vacuum Casting. ACS Omega.
bibtex: '@article{Moritzer_Wortmann_Krieger_Hüsgen_Frese_2021, title={Effect of
Isocyanate Absorption on the Mechanical Properties of Silicone Elastomers in
Polyurethane Vacuum Casting}, journal={ACS Omega}, author={Moritzer, Elmar and
Wortmann, M. and Krieger, P. and Hüsgen, B. and Frese, N.}, year={2021} }'
chicago: Moritzer, Elmar, M. Wortmann, P. Krieger, B. Hüsgen, and N. Frese. “Effect
of Isocyanate Absorption on the Mechanical Properties of Silicone Elastomers
in Polyurethane Vacuum Casting.” ACS Omega, 2021.
ieee: E. Moritzer, M. Wortmann, P. Krieger, B. Hüsgen, and N. Frese, “Effect of
Isocyanate Absorption on the Mechanical Properties of Silicone Elastomers in
Polyurethane Vacuum Casting,” ACS Omega, 2021.
mla: Moritzer, Elmar, et al. “Effect of Isocyanate Absorption on the Mechanical
Properties of Silicone Elastomers in Polyurethane Vacuum Casting.” ACS Omega,
2021.
short: E. Moritzer, M. Wortmann, P. Krieger, B. Hüsgen, N. Frese, ACS Omega (2021).
date_created: 2022-06-07T09:44:54Z
date_updated: 2022-06-07T09:45:03Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
publication: ACS Omega
publication_date: '2021'
status: public
title: Effect of Isocyanate Absorption on the Mechanical Properties of Silicone Elastomers
in Polyurethane Vacuum Casting
type: newspaper_article
user_id: '44116'
year: '2021'
...
---
_id: '31774'
author:
- first_name: Elmar
full_name: Moritzer, Elmar
id: '20531'
last_name: Moritzer
- first_name: Julian
full_name: Wächter, Julian
id: '29588'
last_name: Wächter
- first_name: C.
full_name: Fuhrmann, C.
last_name: Fuhrmann
citation:
ama: "Moritzer E, Wächter J, Fuhrmann C. INVESTIGATION OF THE PROCESSABILITY OF
DIFFERENT HIGH\x02PERFORMANCE MATERIALS IN THE FDM PROCESS WITH REGARD TO THE
SHRINKAGE BEHAVIOR. In: 23rd International Conference Materials. ; 2021:58-67."
apa: "Moritzer, E., Wächter, J., & Fuhrmann, C. (2021). INVESTIGATION OF THE
PROCESSABILITY OF DIFFERENT HIGH\x02PERFORMANCE MATERIALS IN THE FDM PROCESS WITH
REGARD TO THE SHRINKAGE BEHAVIOR. 23rd International Conference Materials,
58–67."
bibtex: "@inproceedings{Moritzer_Wächter_Fuhrmann_2021, place={Burgas (Bulgarien)},
title={ INVESTIGATION OF THE PROCESSABILITY OF DIFFERENT HIGH\x02PERFORMANCE MATERIALS
IN THE FDM PROCESS WITH REGARD TO THE SHRINKAGE BEHAVIOR}, booktitle={23rd International
Conference Materials}, author={Moritzer, Elmar and Wächter, Julian and Fuhrmann,
C.}, year={2021}, pages={58–67} }"
chicago: "Moritzer, Elmar, Julian Wächter, and C. Fuhrmann. “ INVESTIGATION OF THE
PROCESSABILITY OF DIFFERENT HIGH\x02PERFORMANCE MATERIALS IN THE FDM PROCESS WITH
REGARD TO THE SHRINKAGE BEHAVIOR.” In 23rd International Conference Materials,
58–67. Burgas (Bulgarien), 2021."
ieee: "E. Moritzer, J. Wächter, and C. Fuhrmann, “ INVESTIGATION OF THE PROCESSABILITY
OF DIFFERENT HIGH\x02PERFORMANCE MATERIALS IN THE FDM PROCESS WITH REGARD TO THE
SHRINKAGE BEHAVIOR,” in 23rd International Conference Materials, Burgas
(Bulgarien), 2021, pp. 58–67."
mla: "Moritzer, Elmar, et al. “ INVESTIGATION OF THE PROCESSABILITY OF DIFFERENT
HIGH\x02PERFORMANCE MATERIALS IN THE FDM PROCESS WITH REGARD TO THE SHRINKAGE
BEHAVIOR.” 23rd International Conference Materials, 2021, pp. 58–67."
short: 'E. Moritzer, J. Wächter, C. Fuhrmann, in: 23rd International Conference
Materials, Burgas (Bulgarien), 2021, pp. 58–67.'
conference:
location: Burgas (Bulgarien)
name: 23rd International Conference Materials
date_created: 2022-06-07T09:58:51Z
date_updated: 2022-06-07T09:58:57Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
page: 58- 67
place: Burgas (Bulgarien)
publication: 23rd International Conference Materials
publication_identifier:
isbn:
- 1314-7269
status: public
title: " INVESTIGATION OF THE PROCESSABILITY OF DIFFERENT HIGH\x02PERFORMANCE MATERIALS
IN THE FDM PROCESS WITH REGARD TO THE SHRINKAGE BEHAVIOR"
type: conference
user_id: '44116'
year: '2021'
...