---
_id: '34726'
author:
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
- first_name: Jonas
full_name: Köllermeier, Jonas
id: '58933'
last_name: Köllermeier
citation:
ama: 'Schöppner V, Köllermeier J. Development of an Inline-Measurement System of
the Surface Temperature of Square Hollow Profiles. In: ; 2022.'
apa: Schöppner, V., & Köllermeier, J. (2022). Development of an Inline-Measurement
System of the Surface Temperature of Square Hollow Profiles. Annual Conference
of the Society of Plastics Engineers (ANTEC 2022), Charlotte.
bibtex: '@inproceedings{Schöppner_Köllermeier_2022, title={Development of an Inline-Measurement
System of the Surface Temperature of Square Hollow Profiles}, author={Schöppner,
Volker and Köllermeier, Jonas}, year={2022} }'
chicago: Schöppner, Volker, and Jonas Köllermeier. “Development of an Inline-Measurement
System of the Surface Temperature of Square Hollow Profiles,” 2022.
ieee: V. Schöppner and J. Köllermeier, “Development of an Inline-Measurement System
of the Surface Temperature of Square Hollow Profiles,” presented at the Annual
Conference of the Society of Plastics Engineers (ANTEC 2022), Charlotte, 2022.
mla: Schöppner, Volker, and Jonas Köllermeier. Development of an Inline-Measurement
System of the Surface Temperature of Square Hollow Profiles. 2022.
short: 'V. Schöppner, J. Köllermeier, in: 2022.'
conference:
location: Charlotte
name: Annual Conference of the Society of Plastics Engineers (ANTEC 2022)
date_created: 2022-12-21T13:44:06Z
date_updated: 2023-01-12T09:17:15Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
status: public
title: Development of an Inline-Measurement System of the Surface Temperature of Square
Hollow Profiles
type: conference
user_id: '44116'
year: '2022'
...
---
_id: '36335'
abstract:
- lang: eng
text: Transformation of Fe- and Cu-rich primary phase particles was studied in an
Al-Li-based alloy prepared by twin-roll casting. Thin foils for combined STEM
and SEM experiments were prepared by electrolytic twin-jet polishing. They were
in-situ heated in a TEM heating stage and observed at 200 kV in the JEOL JEM 2200FS
electron microscope equipped with STEM HAADF and BF detectors and SEM BSE and
SE detectors working both in composition and topographic modes. The resulting
structures were combined with EDS mapping performed directly in the heating holder.
Dissolution and transformation of Cu- and Fe-rich particles occur above 500 °C.
EDS maps acquired on the foil cooled down to room temperature show that Cu and
Fe are both still present in newly formed particles, most likely indicating the
presence of the Al7Cu2Fe phase.
author:
- first_name: Miroslav
full_name: CIESLAR, Miroslav
last_name: CIESLAR
- first_name: Barbora
full_name: KŘIVSKÁ, Barbora
last_name: KŘIVSKÁ
- first_name: Rostislav
full_name: KRÁLÍK, Rostislav
last_name: KRÁLÍK
- first_name: Lucia
full_name: BAJTOŠOVÁ, Lucia
last_name: BAJTOŠOVÁ
- first_name: Olexandr
full_name: Grydin, Olexandr
id: '43822'
last_name: Grydin
- first_name: Mykhailo
full_name: STOLBCHENKO, Mykhailo
last_name: STOLBCHENKO
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: 'CIESLAR M, KŘIVSKÁ B, KRÁLÍK R, et al. HOMOGENIZATION OF TWIN-ROLL CAST Al-Li-BASED
ALLOY STUDIED BY IN-SITU ELECTRON MICROSCOPY. In: METAL 2022 Conference Proeedings.
TANGER Ltd.; 2022. doi:10.37904/metal.2022.4438'
apa: CIESLAR, M., KŘIVSKÁ, B., KRÁLÍK, R., BAJTOŠOVÁ, L., Grydin, O., STOLBCHENKO,
M., & Schaper, M. (2022). HOMOGENIZATION OF TWIN-ROLL CAST Al-Li-BASED ALLOY
STUDIED BY IN-SITU ELECTRON MICROSCOPY. METAL 2022 Conference Proeedings.
Metal 2022, Brno. https://doi.org/10.37904/metal.2022.4438
bibtex: '@inproceedings{CIESLAR_KŘIVSKÁ_KRÁLÍK_BAJTOŠOVÁ_Grydin_STOLBCHENKO_Schaper_2022,
title={HOMOGENIZATION OF TWIN-ROLL CAST Al-Li-BASED ALLOY STUDIED BY IN-SITU ELECTRON
MICROSCOPY}, DOI={10.37904/metal.2022.4438},
booktitle={METAL 2022 Conference Proeedings}, publisher={TANGER Ltd.}, author={CIESLAR,
Miroslav and KŘIVSKÁ, Barbora and KRÁLÍK, Rostislav and BAJTOŠOVÁ, Lucia and Grydin,
Olexandr and STOLBCHENKO, Mykhailo and Schaper, Mirko}, year={2022} }'
chicago: CIESLAR, Miroslav, Barbora KŘIVSKÁ, Rostislav KRÁLÍK, Lucia BAJTOŠOVÁ,
Olexandr Grydin, Mykhailo STOLBCHENKO, and Mirko Schaper. “HOMOGENIZATION OF TWIN-ROLL
CAST Al-Li-BASED ALLOY STUDIED BY IN-SITU ELECTRON MICROSCOPY.” In METAL 2022
Conference Proeedings. TANGER Ltd., 2022. https://doi.org/10.37904/metal.2022.4438.
ieee: 'M. CIESLAR et al., “HOMOGENIZATION OF TWIN-ROLL CAST Al-Li-BASED ALLOY
STUDIED BY IN-SITU ELECTRON MICROSCOPY,” presented at the Metal 2022, Brno, 2022,
doi: 10.37904/metal.2022.4438.'
mla: CIESLAR, Miroslav, et al. “HOMOGENIZATION OF TWIN-ROLL CAST Al-Li-BASED ALLOY
STUDIED BY IN-SITU ELECTRON MICROSCOPY.” METAL 2022 Conference Proeedings,
TANGER Ltd., 2022, doi:10.37904/metal.2022.4438.
short: 'M. CIESLAR, B. KŘIVSKÁ, R. KRÁLÍK, L. BAJTOŠOVÁ, O. Grydin, M. STOLBCHENKO,
M. Schaper, in: METAL 2022 Conference Proeedings, TANGER Ltd., 2022.'
conference:
end_date: 2022-05-19
location: Brno
name: Metal 2022
start_date: 2022-05-18
date_created: 2023-01-12T09:39:41Z
date_updated: 2023-01-12T09:44:17Z
department:
- _id: '158'
- _id: '321'
doi: 10.37904/metal.2022.4438
keyword:
- Al-Li-based alloy
- in-situ TEM
- homogenization
- phase transformation
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.confer.cz/metal/2022/4438-homogenization-of-twin-roll-cast-al-li-based-alloy-studied-by-in-situ-electron-microscopy
oa: '1'
publication: METAL 2022 Conference Proeedings
publication_identifier:
issn:
- 2694-9296
publication_status: published
publisher: TANGER Ltd.
status: public
title: HOMOGENIZATION OF TWIN-ROLL CAST Al-Li-BASED ALLOY STUDIED BY IN-SITU ELECTRON
MICROSCOPY
type: conference
user_id: '43822'
year: '2022'
...
---
_id: '34702'
alternative_title:
- Philosophy and Science in the Age of Émilie Du Châtelet (1706-1749)
citation:
ama: Hagengruber RE, ed. Époque Émilienne. Springer International Publishing;
2022. doi:10.1007/978-3-030-89921-9
apa: Hagengruber, R. E. (Ed.). (2022). Époque Émilienne. Springer International
Publishing. https://doi.org/10.1007/978-3-030-89921-9
bibtex: '@book{Hagengruber_2022, place={Cham}, title={Époque Émilienne}, DOI={10.1007/978-3-030-89921-9},
publisher={Springer International Publishing}, year={2022} }'
chicago: 'Hagengruber, Ruth Edith, ed. Époque Émilienne. Cham: Springer International
Publishing, 2022. https://doi.org/10.1007/978-3-030-89921-9.'
ieee: 'R. E. Hagengruber, Ed., Époque Émilienne. Cham: Springer International
Publishing, 2022.'
mla: Hagengruber, Ruth Edith, editor. Époque Émilienne. Springer International
Publishing, 2022, doi:10.1007/978-3-030-89921-9.
short: R.E. Hagengruber, ed., Époque Émilienne, Springer International Publishing,
Cham, 2022.
date_created: 2022-12-21T11:21:15Z
date_updated: 2023-01-12T10:04:10Z
department:
- _id: '14'
- _id: '519'
doi: 10.1007/978-3-030-89921-9
editor:
- first_name: Ruth Edith
full_name: Hagengruber, Ruth Edith
id: '198'
last_name: Hagengruber
orcid: https://orcid.org/0000-0003-3360-6335
keyword:
- Émilie Du Châtelet
- History of Science
- Kant
- Newton
- Maupertuis
- Voltaire
language:
- iso: eng
place: Cham
publication_identifier:
isbn:
- '9783030899202'
- '9783030899219'
issn:
- 2523-8760
- 2523-8779
publication_status: published
publisher: Springer International Publishing
quality_controlled: '1'
status: public
title: Époque Émilienne
type: book_editor
user_id: '14931'
year: '2022'
...
---
_id: '36414'
abstract:
- lang: eng
text: Recently, microcavities with anisotropic materials were shown to
be able to create bands with non-zero local Berry curvature. The anisotropic refractive
index of the cavity layer is believed to be critical in opening an energy gap
at the tilted Dirac points. In this work, we show that the anticrossing between
a cavity mode and a Bragg mode can also be realized within an empty microcavity
without any birefringent materials in the cavity layer. Nondispersive bands are
observed within the energy gap due to the particular refractive index distribution
of the sample. The intrinsic TE-TM splitting and XY splitting of DBR mirrors induce
the squeezing of the cavity modes in momentum space, so that the nondispersive
bands are tilted and spin-dependent. Our results pave the way to investigate interesting
physical phenomena of photonic modes close to or in the nondispersive bands without
anisotropic cavity layers.
article_number: '201103'
author:
- first_name: Ying
full_name: Gao, Ying
last_name: Gao
- first_name: Yao
full_name: Li, Yao
last_name: Li
- first_name: Xuekai
full_name: Ma, Xuekai
last_name: Ma
- first_name: Meini
full_name: Gao, Meini
last_name: Gao
- first_name: Haitao
full_name: Dai, Haitao
last_name: Dai
- first_name: Stefan
full_name: Schumacher, Stefan
last_name: Schumacher
- first_name: Tingge
full_name: Gao, Tingge
last_name: Gao
citation:
ama: Gao Y, Li Y, Ma X, et al. Tilting nondispersive bands in an empty microcavity.
Applied Physics Letters. 2022;121(20). doi:10.1063/5.0093908
apa: Gao, Y., Li, Y., Ma, X., Gao, M., Dai, H., Schumacher, S., & Gao, T. (2022).
Tilting nondispersive bands in an empty microcavity. Applied Physics Letters,
121(20), Article 201103. https://doi.org/10.1063/5.0093908
bibtex: '@article{Gao_Li_Ma_Gao_Dai_Schumacher_Gao_2022, title={Tilting nondispersive
bands in an empty microcavity}, volume={121}, DOI={10.1063/5.0093908},
number={20201103}, journal={Applied Physics Letters}, publisher={AIP Publishing},
author={Gao, Ying and Li, Yao and Ma, Xuekai and Gao, Meini and Dai, Haitao and
Schumacher, Stefan and Gao, Tingge}, year={2022} }'
chicago: Gao, Ying, Yao Li, Xuekai Ma, Meini Gao, Haitao Dai, Stefan Schumacher,
and Tingge Gao. “Tilting Nondispersive Bands in an Empty Microcavity.” Applied
Physics Letters 121, no. 20 (2022). https://doi.org/10.1063/5.0093908.
ieee: 'Y. Gao et al., “Tilting nondispersive bands in an empty microcavity,”
Applied Physics Letters, vol. 121, no. 20, Art. no. 201103, 2022, doi:
10.1063/5.0093908.'
mla: Gao, Ying, et al. “Tilting Nondispersive Bands in an Empty Microcavity.” Applied
Physics Letters, vol. 121, no. 20, 201103, AIP Publishing, 2022, doi:10.1063/5.0093908.
short: Y. Gao, Y. Li, X. Ma, M. Gao, H. Dai, S. Schumacher, T. Gao, Applied Physics
Letters 121 (2022).
date_created: 2023-01-12T12:03:49Z
date_updated: 2023-01-12T12:06:03Z
doi: 10.1063/5.0093908
intvolume: ' 121'
issue: '20'
keyword:
- Physics and Astronomy (miscellaneous)
language:
- iso: eng
publication: Applied Physics Letters
publication_identifier:
issn:
- 0003-6951
- 1077-3118
publication_status: published
publisher: AIP Publishing
status: public
title: Tilting nondispersive bands in an empty microcavity
type: journal_article
user_id: '59416'
volume: 121
year: '2022'
...
---
_id: '35998'
author:
- first_name: Thomas
full_name: Berger, Thomas
id: '77457'
last_name: Berger
- first_name: Dario
full_name: Dennstädt, Dario
id: '98033'
last_name: Dennstädt
citation:
ama: Berger T, Dennstädt D. Funnel PMC with feasibility constraints for nonlinear
systems with arbitrary relative degree. IEEE Control Systems Letters.
2022;6:2804-2809.
apa: Berger, T., & Dennstädt, D. (2022). Funnel PMC with feasibility constraints
for nonlinear systems with arbitrary relative degree. IEEE Control Systems
Letters, 6, 2804–2809.
bibtex: '@article{Berger_Dennstädt_2022, title={Funnel PMC with feasibility constraints
for nonlinear systems with arbitrary relative degree}, volume={6}, journal={IEEE
Control Systems Letters}, author={Berger, Thomas and Dennstädt, Dario}, year={2022},
pages={2804–2809} }'
chicago: 'Berger, Thomas, and Dario Dennstädt. “Funnel PMC with Feasibility Constraints
for Nonlinear Systems with Arbitrary Relative Degree.” IEEE Control Systems
Letters 6 (2022): 2804–9.'
ieee: T. Berger and D. Dennstädt, “Funnel PMC with feasibility constraints for nonlinear
systems with arbitrary relative degree,” IEEE Control Systems Letters,
vol. 6, pp. 2804–2809, 2022.
mla: Berger, Thomas, and Dario Dennstädt. “Funnel PMC with Feasibility Constraints
for Nonlinear Systems with Arbitrary Relative Degree.” IEEE Control Systems
Letters, vol. 6, 2022, pp. 2804–09.
short: T. Berger, D. Dennstädt, IEEE Control Systems Letters 6 (2022) 2804–2809.
date_created: 2023-01-11T10:52:02Z
date_updated: 2023-01-12T12:27:34Z
intvolume: ' 6'
language:
- iso: eng
page: 2804-2809
publication: IEEE Control Systems Letters
status: public
title: Funnel PMC with feasibility constraints for nonlinear systems with arbitrary
relative degree
type: journal_article
user_id: '77457'
volume: 6
year: '2022'
...
---
_id: '36005'
article_number: '105111'
author:
- first_name: Thomas
full_name: Berger, Thomas
id: '77457'
last_name: Berger
citation:
ama: Berger T. Feedback control of the COVID-19 pandemic with guaranteed non-exceeding
ICU capacity. Systems & Control Letters. 2022;160.
apa: Berger, T. (2022). Feedback control of the COVID-19 pandemic with guaranteed
non-exceeding ICU capacity. Systems & Control Letters, 160,
Article 105111.
bibtex: '@article{Berger_2022, title={Feedback control of the COVID-19 pandemic
with guaranteed non-exceeding ICU capacity}, volume={160}, number={105111}, journal={Systems
& Control Letters}, author={Berger, Thomas}, year={2022} }'
chicago: Berger, Thomas. “Feedback Control of the COVID-19 Pandemic with Guaranteed
Non-Exceeding ICU Capacity.” Systems & Control Letters 160 (2022).
ieee: T. Berger, “Feedback control of the COVID-19 pandemic with guaranteed non-exceeding
ICU capacity,” Systems & Control Letters, vol. 160, Art. no. 105111,
2022.
mla: Berger, Thomas. “Feedback Control of the COVID-19 Pandemic with Guaranteed
Non-Exceeding ICU Capacity.” Systems & Control Letters, vol. 160, 105111,
2022.
short: T. Berger, Systems & Control Letters 160 (2022).
date_created: 2023-01-11T11:01:24Z
date_updated: 2023-01-12T12:27:56Z
intvolume: ' 160'
language:
- iso: eng
publication: Systems & Control Letters
status: public
title: Feedback control of the COVID-19 pandemic with guaranteed non-exceeding ICU
capacity
type: journal_article
user_id: '77457'
volume: 160
year: '2022'
...
---
_id: '35993'
article_number: '105352'
author:
- first_name: J.
full_name: Jaiswal, J.
last_name: Jaiswal
- first_name: Thomas
full_name: Berger, Thomas
id: '77457'
last_name: Berger
- first_name: 'N. K. '
full_name: 'Tomar, N. K. '
last_name: Tomar
citation:
ama: Jaiswal J, Berger T, Tomar NK. Partial impulse observability of linear descriptor
systems. Systems & Control Letters. 2022;168.
apa: Jaiswal, J., Berger, T., & Tomar, N. K. (2022). Partial impulse observability
of linear descriptor systems. Systems & Control Letters, 168,
Article 105352.
bibtex: '@article{Jaiswal_Berger_Tomar_2022, title={Partial impulse observability
of linear descriptor systems}, volume={168}, number={105352}, journal={Systems
& Control Letters}, author={Jaiswal, J. and Berger, Thomas and Tomar, N. K.
}, year={2022} }'
chicago: Jaiswal, J., Thomas Berger, and N. K. Tomar. “Partial Impulse Observability
of Linear Descriptor Systems.” Systems & Control Letters 168 (2022).
ieee: J. Jaiswal, T. Berger, and N. K. Tomar, “Partial impulse observability of
linear descriptor systems,” Systems & Control Letters, vol. 168, Art.
no. 105352, 2022.
mla: Jaiswal, J., et al. “Partial Impulse Observability of Linear Descriptor Systems.”
Systems & Control Letters, vol. 168, 105352, 2022.
short: J. Jaiswal, T. Berger, N.K. Tomar, Systems & Control Letters 168 (2022).
date_created: 2023-01-11T10:48:38Z
date_updated: 2023-01-12T12:27:43Z
intvolume: ' 168'
language:
- iso: eng
publication: Systems & Control Letters
status: public
title: Partial impulse observability of linear descriptor systems
type: journal_article
user_id: '77457'
volume: 168
year: '2022'
...
---
_id: '36028'
article_number: '109999'
author:
- first_name: Thomas
full_name: Berger, Thomas
id: '77457'
last_name: Berger
- first_name: 'M. '
full_name: 'Puche, M. '
last_name: Puche
- first_name: 'F. L. '
full_name: 'Schwenninger, F. L. '
last_name: Schwenninger
citation:
ama: Berger T, Puche M, Schwenninger FL. Funnel control for a moving water tank.
Automatica. 2022;135.
apa: Berger, T., Puche, M., & Schwenninger, F. L. (2022). Funnel control for
a moving water tank. Automatica, 135, Article 109999.
bibtex: '@article{Berger_Puche_Schwenninger_2022, title={Funnel control for a moving
water tank}, volume={135}, number={109999}, journal={Automatica}, author={Berger,
Thomas and Puche, M. and Schwenninger, F. L. }, year={2022} }'
chicago: Berger, Thomas, M. Puche, and F. L. Schwenninger. “Funnel Control for
a Moving Water Tank.” Automatica 135 (2022).
ieee: T. Berger, M. Puche, and F. L. Schwenninger, “Funnel control for a moving
water tank,” Automatica, vol. 135, Art. no. 109999, 2022.
mla: Berger, Thomas, et al. “Funnel Control for a Moving Water Tank.” Automatica,
vol. 135, 109999, 2022.
short: T. Berger, M. Puche, F.L. Schwenninger, Automatica 135 (2022).
date_created: 2023-01-11T11:07:54Z
date_updated: 2023-01-12T12:28:02Z
intvolume: ' 135'
language:
- iso: eng
publication: Automatica
status: public
title: Funnel control for a moving water tank
type: journal_article
user_id: '77457'
volume: 135
year: '2022'
...
---
_id: '36022'
author:
- first_name: Thomas
full_name: Berger, Thomas
id: '77457'
last_name: Berger
- first_name: F.
full_name: Haller, F.
last_name: Haller
citation:
ama: Berger T, Haller F. On an extension of a global implicit function theorem.
Comptes Rendus Mathématique. 2022;360:439-450.
apa: Berger, T., & Haller, F. (2022). On an extension of a global implicit function
theorem. Comptes Rendus Mathématique, 360, 439–450.
bibtex: '@article{Berger_Haller_2022, title={On an extension of a global implicit
function theorem}, volume={360}, journal={Comptes Rendus Mathématique}, author={Berger,
Thomas and Haller, F.}, year={2022}, pages={439–450} }'
chicago: 'Berger, Thomas, and F. Haller. “On an Extension of a Global Implicit Function
Theorem.” Comptes Rendus Mathématique 360 (2022): 439–50.'
ieee: T. Berger and F. Haller, “On an extension of a global implicit function theorem,”
Comptes Rendus Mathématique, vol. 360, pp. 439–450, 2022.
mla: Berger, Thomas, and F. Haller. “On an Extension of a Global Implicit Function
Theorem.” Comptes Rendus Mathématique, vol. 360, 2022, pp. 439–50.
short: T. Berger, F. Haller, Comptes Rendus Mathématique 360 (2022) 439–450.
date_created: 2023-01-11T11:05:11Z
date_updated: 2023-01-12T12:30:09Z
intvolume: ' 360'
language:
- iso: eng
page: 439-450
publication: Comptes Rendus Mathématique
status: public
title: On an extension of a global implicit function theorem
type: journal_article
user_id: '15694'
volume: 360
year: '2022'
...
---
_id: '36219'
author:
- first_name: Dieter
full_name: Krimphove, Dieter
id: '282'
last_name: Krimphove
citation:
ama: Krimphove D. Der Fall Coca Cola - “Arbeitsverweigerung” des EuGH? ArbR-
Arbeitsrecht Aktuell. 2022;(15):363 ff.
apa: Krimphove, D. (2022). Der Fall Coca Cola - “Arbeitsverweigerung” des EuGH?
ArbR- Arbeitsrecht Aktuell, 15, 363 ff.
bibtex: '@article{Krimphove_2022, title={Der Fall Coca Cola - “Arbeitsverweigerung”
des EuGH?}, number={15}, journal={ArbR- Arbeitsrecht Aktuell}, author={Krimphove,
Dieter}, year={2022}, pages={363 ff.} }'
chicago: 'Krimphove, Dieter. “Der Fall Coca Cola - ‘Arbeitsverweigerung’ des EuGH?”
ArbR- Arbeitsrecht Aktuell, no. 15 (2022): 363 ff.'
ieee: D. Krimphove, “Der Fall Coca Cola - ‘Arbeitsverweigerung’ des EuGH?,” ArbR-
Arbeitsrecht Aktuell, no. 15, p. 363 ff., 2022.
mla: Krimphove, Dieter. “Der Fall Coca Cola - ‘Arbeitsverweigerung’ des EuGH?” ArbR-
Arbeitsrecht Aktuell, no. 15, 2022, p. 363 ff.
short: D. Krimphove, ArbR- Arbeitsrecht Aktuell (2022) 363 ff.
date_created: 2023-01-11T14:44:48Z
date_updated: 2023-01-12T12:33:29Z
issue: '15'
language:
- iso: ger
page: 363 ff.
publication: ArbR- Arbeitsrecht Aktuell
publication_status: published
status: public
title: Der Fall Coca Cola - "Arbeitsverweigerung" des EuGH?
type: journal_article
user_id: '282'
year: '2022'
...
---
_id: '33671'
abstract:
- lang: eng
text: "Abstract\r\n We demonstrate
the fabrication of micron-wide tungsten silicide superconducting nanowire single-photon
detectors on a silicon substrate using laser lithography. We show saturated internal
detection efficiencies with wire widths ranging from 0.59 µm
to 1.43 µm under illumination at 1550 nm. We demonstrate
both straight wires, as well as meandered structures. Single-photon sensitivity
is shown in devices up to 4 mm in length. Laser-lithographically written devices
allow for fast and easy structuring of large areas while maintaining a saturated
internal efficiency for wire widths around 1 µm."
article_number: '055005'
author:
- first_name: Maximilian
full_name: Protte, Maximilian
id: '46170'
last_name: Protte
- first_name: Varun B
full_name: Verma, Varun B
last_name: Verma
- first_name: Jan Philipp
full_name: Höpker, Jan Philipp
id: '33913'
last_name: Höpker
- first_name: Richard P
full_name: Mirin, Richard P
last_name: Mirin
- first_name: Sae
full_name: Woo Nam, Sae
last_name: Woo Nam
- first_name: Tim
full_name: Bartley, Tim
id: '49683'
last_name: Bartley
citation:
ama: Protte M, Verma VB, Höpker JP, Mirin RP, Woo Nam S, Bartley T. Laser-lithographically
written micron-wide superconducting nanowire single-photon detectors. Superconductor
Science and Technology. 2022;35(5). doi:10.1088/1361-6668/ac5338
apa: Protte, M., Verma, V. B., Höpker, J. P., Mirin, R. P., Woo Nam, S., & Bartley,
T. (2022). Laser-lithographically written micron-wide superconducting nanowire
single-photon detectors. Superconductor Science and Technology, 35(5),
Article 055005. https://doi.org/10.1088/1361-6668/ac5338
bibtex: '@article{Protte_Verma_Höpker_Mirin_Woo Nam_Bartley_2022, title={Laser-lithographically
written micron-wide superconducting nanowire single-photon detectors}, volume={35},
DOI={10.1088/1361-6668/ac5338},
number={5055005}, journal={Superconductor Science and Technology}, publisher={IOP
Publishing}, author={Protte, Maximilian and Verma, Varun B and Höpker, Jan Philipp
and Mirin, Richard P and Woo Nam, Sae and Bartley, Tim}, year={2022} }'
chicago: Protte, Maximilian, Varun B Verma, Jan Philipp Höpker, Richard P Mirin,
Sae Woo Nam, and Tim Bartley. “Laser-Lithographically Written Micron-Wide Superconducting
Nanowire Single-Photon Detectors.” Superconductor Science and Technology
35, no. 5 (2022). https://doi.org/10.1088/1361-6668/ac5338.
ieee: 'M. Protte, V. B. Verma, J. P. Höpker, R. P. Mirin, S. Woo Nam, and T. Bartley,
“Laser-lithographically written micron-wide superconducting nanowire single-photon
detectors,” Superconductor Science and Technology, vol. 35, no. 5, Art.
no. 055005, 2022, doi: 10.1088/1361-6668/ac5338.'
mla: Protte, Maximilian, et al. “Laser-Lithographically Written Micron-Wide Superconducting
Nanowire Single-Photon Detectors.” Superconductor Science and Technology,
vol. 35, no. 5, 055005, IOP Publishing, 2022, doi:10.1088/1361-6668/ac5338.
short: M. Protte, V.B. Verma, J.P. Höpker, R.P. Mirin, S. Woo Nam, T. Bartley, Superconductor
Science and Technology 35 (2022).
date_created: 2022-10-11T07:14:11Z
date_updated: 2023-01-12T13:02:52Z
department:
- _id: '15'
- _id: '230'
- _id: '623'
doi: 10.1088/1361-6668/ac5338
intvolume: ' 35'
issue: '5'
keyword:
- Materials Chemistry
- Electrical and Electronic Engineering
- Metals and Alloys
- Condensed Matter Physics
- Ceramics and Composites
language:
- iso: eng
publication: Superconductor Science and Technology
publication_identifier:
issn:
- 0953-2048
- 1361-6668
publication_status: published
publisher: IOP Publishing
status: public
title: Laser-lithographically written micron-wide superconducting nanowire single-photon
detectors
type: journal_article
user_id: '33913'
volume: 35
year: '2022'
...
---
_id: '30342'
article_number: '108'
author:
- first_name: Nina Amelie
full_name: Lange, Nina Amelie
id: '56843'
last_name: Lange
- first_name: Jan Philipp
full_name: Höpker, Jan Philipp
id: '33913'
last_name: Höpker
- first_name: Raimund
full_name: Ricken, Raimund
last_name: Ricken
- first_name: Viktor
full_name: Quiring, Viktor
last_name: Quiring
- first_name: Christof
full_name: Eigner, Christof
id: '13244'
last_name: Eigner
orcid: https://orcid.org/0000-0002-5693-3083
- first_name: Christine
full_name: Silberhorn, Christine
id: '26263'
last_name: Silberhorn
- first_name: Tim
full_name: Bartley, Tim
id: '49683'
last_name: Bartley
citation:
ama: Lange NA, Höpker JP, Ricken R, et al. Cryogenic integrated spontaneous parametric
down-conversion. Optica. 2022;9(1). doi:10.1364/optica.445576
apa: Lange, N. A., Höpker, J. P., Ricken, R., Quiring, V., Eigner, C., Silberhorn,
C., & Bartley, T. (2022). Cryogenic integrated spontaneous parametric down-conversion.
Optica, 9(1), Article 108. https://doi.org/10.1364/optica.445576
bibtex: '@article{Lange_Höpker_Ricken_Quiring_Eigner_Silberhorn_Bartley_2022, title={Cryogenic
integrated spontaneous parametric down-conversion}, volume={9}, DOI={10.1364/optica.445576},
number={1108}, journal={Optica}, publisher={The Optical Society}, author={Lange,
Nina Amelie and Höpker, Jan Philipp and Ricken, Raimund and Quiring, Viktor and
Eigner, Christof and Silberhorn, Christine and Bartley, Tim}, year={2022} }'
chicago: Lange, Nina Amelie, Jan Philipp Höpker, Raimund Ricken, Viktor Quiring,
Christof Eigner, Christine Silberhorn, and Tim Bartley. “Cryogenic Integrated
Spontaneous Parametric Down-Conversion.” Optica 9, no. 1 (2022). https://doi.org/10.1364/optica.445576.
ieee: 'N. A. Lange et al., “Cryogenic integrated spontaneous parametric down-conversion,”
Optica, vol. 9, no. 1, Art. no. 108, 2022, doi: 10.1364/optica.445576.'
mla: Lange, Nina Amelie, et al. “Cryogenic Integrated Spontaneous Parametric Down-Conversion.”
Optica, vol. 9, no. 1, 108, The Optical Society, 2022, doi:10.1364/optica.445576.
short: N.A. Lange, J.P. Höpker, R. Ricken, V. Quiring, C. Eigner, C. Silberhorn,
T. Bartley, Optica 9 (2022).
date_created: 2022-03-16T08:53:22Z
date_updated: 2023-01-12T13:42:23Z
department:
- _id: '15'
- _id: '230'
- _id: '623'
doi: 10.1364/optica.445576
intvolume: ' 9'
issue: '1'
keyword:
- Atomic and Molecular Physics
- and Optics
- Electronic
- Optical and Magnetic Materials
language:
- iso: eng
publication: Optica
publication_identifier:
issn:
- 2334-2536
publication_status: published
publisher: The Optical Society
status: public
title: Cryogenic integrated spontaneous parametric down-conversion
type: journal_article
user_id: '33913'
volume: 9
year: '2022'
...
---
_id: '36413'
author:
- first_name: Rieke
full_name: Becker, Rieke
id: '33229'
last_name: Becker
- first_name: Markus
full_name: Lauert, Markus
id: '33619'
last_name: Lauert
- first_name: Jessica
full_name: Fischer, Jessica
last_name: Fischer
- first_name: Hannah
full_name: Kirchhoff, Hannah
last_name: Kirchhoff
- first_name: Alina
full_name: Kornbach, Alina
last_name: Kornbach
- first_name: Katharina
full_name: Januschewski, Katharina
id: '71550'
last_name: Januschewski
citation:
ama: 'Becker R, Lauert M, Fischer J, Kirchhoff H, Kornbach A, Januschewski K. Tagungsbericht:
Unverfügbarkeit – Widmung – Latenz: Das Heilige in der Kultur. Interdisziplinäre
Tagung vom 16. bis 18. November 2021 an der Universität Paderborn.; 2022.'
apa: 'Becker, R., Lauert, M., Fischer, J., Kirchhoff, H., Kornbach, A., & Januschewski,
K. (2022). Tagungsbericht: Unverfügbarkeit – Widmung – Latenz: Das Heilige
in der Kultur. Interdisziplinäre Tagung vom 16. bis 18. November 2021 an der Universität
Paderborn.'
bibtex: '@book{Becker_Lauert_Fischer_Kirchhoff_Kornbach_Januschewski_2022, series={H-Soz-Kult},
title={Tagungsbericht: Unverfügbarkeit – Widmung – Latenz: Das Heilige in der
Kultur. Interdisziplinäre Tagung vom 16. bis 18. November 2021 an der Universität
Paderborn}, author={Becker, Rieke and Lauert, Markus and Fischer, Jessica and
Kirchhoff, Hannah and Kornbach, Alina and Januschewski, Katharina}, year={2022},
collection={H-Soz-Kult} }'
chicago: 'Becker, Rieke, Markus Lauert, Jessica Fischer, Hannah Kirchhoff, Alina
Kornbach, and Katharina Januschewski. Tagungsbericht: Unverfügbarkeit – Widmung
– Latenz: Das Heilige in der Kultur. Interdisziplinäre Tagung vom 16. bis 18.
November 2021 an der Universität Paderborn. H-Soz-Kult, 2022.'
ieee: 'R. Becker, M. Lauert, J. Fischer, H. Kirchhoff, A. Kornbach, and K. Januschewski,
Tagungsbericht: Unverfügbarkeit – Widmung – Latenz: Das Heilige in der Kultur.
Interdisziplinäre Tagung vom 16. bis 18. November 2021 an der Universität Paderborn.
2022.'
mla: 'Becker, Rieke, et al. Tagungsbericht: Unverfügbarkeit – Widmung – Latenz:
Das Heilige in der Kultur. Interdisziplinäre Tagung vom 16. bis 18. November 2021
an der Universität Paderborn. 2022.'
short: 'R. Becker, M. Lauert, J. Fischer, H. Kirchhoff, A. Kornbach, K. Januschewski,
Tagungsbericht: Unverfügbarkeit – Widmung – Latenz: Das Heilige in der Kultur.
Interdisziplinäre Tagung vom 16. bis 18. November 2021 an der Universität Paderborn,
2022.'
date_created: 2023-01-12T11:46:09Z
date_updated: 2023-01-12T13:51:41Z
department:
- _id: '446'
language:
- iso: ger
main_file_link:
- open_access: '1'
url: www.hsozkult.de/conferencereport/id/fdkn-127899
oa: '1'
publication_status: published
series_title: H-Soz-Kult
status: public
title: 'Tagungsbericht: Unverfügbarkeit – Widmung – Latenz: Das Heilige in der Kultur.
Interdisziplinäre Tagung vom 16. bis 18. November 2021 an der Universität Paderborn'
type: report
user_id: '33229'
year: '2022'
...
---
_id: '36462'
abstract:
- lang: eng
text: The conduction of structure-borne sound through joints causes energy dissipation.
The sound reduction index describes this energy loss as a level decrease in the
particle velocity across series-connected damping elements for which the superposition
principle applies. This simple model can help to develop a testing method for
joints based on this characteristic energy loss. In this paper, this model is
experimentally evaluated for multiple in-series clinched aluminium sheets. Samples
connected by several clinch points arranged in parallel are investigated experimentally,
and the results are discussed.
author:
- first_name: Richard
full_name: Stephan, Richard
last_name: Stephan
- first_name: Alexander
full_name: Brosius, Alexander
last_name: Brosius
citation:
ama: 'Stephan R, Brosius A. Experimental Measurement Method and Evaluation of an
Analytical Approach for Sound Conduction through Multiple Clinched Sheets. In:
The 28th Saxon Conference on Forming Technology SFU and the 7th International
Conference on Accuracy in Forming Technology ICAFT. MDPI; 2022. doi:10.3390/engproc2022026025'
apa: Stephan, R., & Brosius, A. (2022). Experimental Measurement Method and
Evaluation of an Analytical Approach for Sound Conduction through Multiple Clinched
Sheets. The 28th Saxon Conference on Forming Technology SFU and the 7th International
Conference on Accuracy in Forming Technology ICAFT. https://doi.org/10.3390/engproc2022026025
bibtex: '@inproceedings{Stephan_Brosius_2022, title={Experimental Measurement Method
and Evaluation of an Analytical Approach for Sound Conduction through Multiple
Clinched Sheets}, DOI={10.3390/engproc2022026025},
booktitle={The 28th Saxon Conference on Forming Technology SFU and the 7th International
Conference on Accuracy in Forming Technology ICAFT}, publisher={MDPI}, author={Stephan,
Richard and Brosius, Alexander}, year={2022} }'
chicago: Stephan, Richard, and Alexander Brosius. “Experimental Measurement Method
and Evaluation of an Analytical Approach for Sound Conduction through Multiple
Clinched Sheets.” In The 28th Saxon Conference on Forming Technology SFU and
the 7th International Conference on Accuracy in Forming Technology ICAFT.
MDPI, 2022. https://doi.org/10.3390/engproc2022026025.
ieee: 'R. Stephan and A. Brosius, “Experimental Measurement Method and Evaluation
of an Analytical Approach for Sound Conduction through Multiple Clinched Sheets,”
2022, doi: 10.3390/engproc2022026025.'
mla: Stephan, Richard, and Alexander Brosius. “Experimental Measurement Method and
Evaluation of an Analytical Approach for Sound Conduction through Multiple Clinched
Sheets.” The 28th Saxon Conference on Forming Technology SFU and the 7th International
Conference on Accuracy in Forming Technology ICAFT, MDPI, 2022, doi:10.3390/engproc2022026025.
short: 'R. Stephan, A. Brosius, in: The 28th Saxon Conference on Forming Technology
SFU and the 7th International Conference on Accuracy in Forming Technology ICAFT,
MDPI, 2022.'
date_created: 2023-01-12T13:55:07Z
date_updated: 2023-01-12T13:58:49Z
department:
- _id: '630'
doi: 10.3390/engproc2022026025
keyword:
- clinching
- mechanical joining
- damping
- model
- evaluation
- dynamics
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.mdpi.com/2673-4591/26/1/25
oa: '1'
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '133'
name: 'TRR 285 - C: TRR 285 - Project Area C'
- _id: '148'
name: 'TRR 285 – C04: TRR 285 - Subproject C04'
publication: The 28th Saxon Conference on Forming Technology SFU and the 7th International
Conference on Accuracy in Forming Technology ICAFT
publication_status: published
publisher: MDPI
status: public
title: Experimental Measurement Method and Evaluation of an Analytical Approach for
Sound Conduction through Multiple Clinched Sheets
type: conference
user_id: '7850'
year: '2022'
...
---
_id: '32413'
abstract:
- lang: eng
text: Background. Clinching is a conventional cold forming process in which two
or more sheets can be joined without auxiliary parts. A pre-forming of the parts
to be joined, which is introduced by previous manufacturing steps, has an influence
on the joining result. When considering the suitability for joining with regard
to the formability of the materials, the influence of the preforming steps must
be taken into account. The influences of strain hardening and sheet thickness
on the joining properties must be investigated. In this context, a Finite Element
Method (FEM) based metamodel analysis of the clinching process was carried out
in [1] to investigate the robustness of the clinching process with respect to
the different material pre-strains. In [2], the method was extended to the load
bearing simulation.Procedure. The metamodel from preliminary work based on various
FE models, which predicts the load-bearing capacity of a clinched joint influenced
by pre-straining, is compared here with experimental data and the accuracy of
the metamodel prediction is discussed. For this purpose an experimental procedure
was further develop which allows the preforming of metal sheets from which joining
specimens can be separated with a certain degree of unidirectional deformation.
In the study, the procedure for preparing the joint specimens and the results
of the loading tests are presented. Different possible relevant pre-strain combinations
are investigated and compared with the simulation results, to validate the FE
models and choose suitable metamodel.
author:
- first_name: Christian Roman
full_name: Bielak, Christian Roman
id: '34782'
last_name: Bielak
- first_name: Max
full_name: Böhnke, Max
id: '45779'
last_name: Böhnke
- first_name: Mathias
full_name: Bobbert, Mathias
id: '7850'
last_name: Bobbert
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: Bielak CR, Böhnke M, Bobbert M, Meschut G. Experimental and Numerical Investigation
on Manufacturing-Induced Pre-Strain on the Load-Bearing Capacity of Clinched Joints.
Key Engineering Materials. 2022;926:1516-1526. doi:10.4028/p-5d009y
apa: Bielak, C. R., Böhnke, M., Bobbert, M., & Meschut, G. (2022). Experimental
and Numerical Investigation on Manufacturing-Induced Pre-Strain on the Load-Bearing
Capacity of Clinched Joints. Key Engineering Materials, 926, 1516–1526.
https://doi.org/10.4028/p-5d009y
bibtex: '@article{Bielak_Böhnke_Bobbert_Meschut_2022, title={Experimental and Numerical
Investigation on Manufacturing-Induced Pre-Strain on the Load-Bearing Capacity
of Clinched Joints}, volume={926}, DOI={10.4028/p-5d009y},
journal={Key Engineering Materials}, publisher={Trans Tech Publications, Ltd.},
author={Bielak, Christian Roman and Böhnke, Max and Bobbert, Mathias and Meschut,
Gerson}, year={2022}, pages={1516–1526} }'
chicago: 'Bielak, Christian Roman, Max Böhnke, Mathias Bobbert, and Gerson Meschut.
“Experimental and Numerical Investigation on Manufacturing-Induced Pre-Strain
on the Load-Bearing Capacity of Clinched Joints.” Key Engineering Materials
926 (2022): 1516–26. https://doi.org/10.4028/p-5d009y.'
ieee: 'C. R. Bielak, M. Böhnke, M. Bobbert, and G. Meschut, “Experimental and Numerical
Investigation on Manufacturing-Induced Pre-Strain on the Load-Bearing Capacity
of Clinched Joints,” Key Engineering Materials, vol. 926, pp. 1516–1526,
2022, doi: 10.4028/p-5d009y.'
mla: Bielak, Christian Roman, et al. “Experimental and Numerical Investigation on
Manufacturing-Induced Pre-Strain on the Load-Bearing Capacity of Clinched Joints.”
Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022,
pp. 1516–26, doi:10.4028/p-5d009y.
short: C.R. Bielak, M. Böhnke, M. Bobbert, G. Meschut, Key Engineering Materials
926 (2022) 1516–1526.
date_created: 2022-07-25T11:16:15Z
date_updated: 2023-01-12T14:22:52Z
department:
- _id: '157'
doi: 10.4028/p-5d009y
intvolume: ' 926'
keyword:
- Mechanical Engineering
- Mechanics of Materials
- General Materials Science
language:
- iso: eng
page: 1516-1526
publication: Key Engineering Materials
publication_identifier:
issn:
- 1662-9795
publication_status: published
publisher: Trans Tech Publications, Ltd.
quality_controlled: '1'
status: public
title: Experimental and Numerical Investigation on Manufacturing-Induced Pre-Strain
on the Load-Bearing Capacity of Clinched Joints
type: journal_article
user_id: '7850'
volume: 926
year: '2022'
...
---
_id: '36468'
author:
- first_name: David
full_name: Römisch, David
last_name: Römisch
- first_name: Marion
full_name: Merklein, Marion
last_name: Merklein
citation:
ama: 'Römisch D, Merklein M. Experimental and Numerical Analysis of Cold Formed
Multi Pin Structures Using a Multi-Acting Tool Design. In: ; 2022.'
apa: Römisch, D., & Merklein, M. (2022). Experimental and Numerical Analysis
of Cold Formed Multi Pin Structures Using a Multi-Acting Tool Design. 12th
Tooling Conference and Exhibition, Örebro.
bibtex: '@inproceedings{Römisch_Merklein_2022, title={Experimental and Numerical
Analysis of Cold Formed Multi Pin Structures Using a Multi-Acting Tool Design},
author={Römisch, David and Merklein, Marion}, year={2022} }'
chicago: Römisch, David, and Marion Merklein. “Experimental and Numerical Analysis
of Cold Formed Multi Pin Structures Using a Multi-Acting Tool Design,” 2022.
ieee: D. Römisch and M. Merklein, “Experimental and Numerical Analysis of Cold Formed
Multi Pin Structures Using a Multi-Acting Tool Design,” presented at the 12th
Tooling Conference and Exhibition, Örebro, 2022.
mla: Römisch, David, and Marion Merklein. Experimental and Numerical Analysis
of Cold Formed Multi Pin Structures Using a Multi-Acting Tool Design. 2022.
short: 'D. Römisch, M. Merklein, in: 2022.'
conference:
location: Örebro
name: 12th Tooling Conference and Exhibition
date_created: 2023-01-12T14:30:21Z
date_updated: 2023-01-12T14:34:25Z
department:
- _id: '630'
language:
- iso: eng
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '133'
name: 'TRR 285 - C: TRR 285 - Project Area C'
- _id: '145'
name: 'TRR 285 – C01: TRR 285 - Subproject C01'
publication_identifier:
unknown:
- ISBN 978-3-200-08359-2
status: public
title: Experimental and Numerical Analysis of Cold Formed Multi Pin Structures Using
a Multi-Acting Tool Design
type: conference
user_id: '7850'
year: '2022'
...
---
_id: '36470'
author:
- first_name: Simon
full_name: Wituschek, Simon
last_name: Wituschek
- first_name: Michael
full_name: Lechner, Michael
last_name: Lechner
citation:
ama: 'Wituschek S, Lechner M. Versatile tool design for a tumbling self-piercing
riveting process. In: ; 2022.'
apa: Wituschek, S., & Lechner, M. (2022). Versatile tool design for a tumbling
self-piercing riveting process. Tooling 2022 .
bibtex: '@inproceedings{Wituschek_Lechner_2022, title={Versatile tool design for
a tumbling self-piercing riveting process}, author={Wituschek, Simon and Lechner,
Michael}, year={2022} }'
chicago: Wituschek, Simon, and Michael Lechner. “Versatile Tool Design for a Tumbling
Self-Piercing Riveting Process,” 2022.
ieee: S. Wituschek and M. Lechner, “Versatile tool design for a tumbling self-piercing
riveting process,” presented at the Tooling 2022 , 2022.
mla: Wituschek, Simon, and Michael Lechner. Versatile Tool Design for a Tumbling
Self-Piercing Riveting Process. 2022.
short: 'S. Wituschek, M. Lechner, in: 2022.'
conference:
name: 'Tooling 2022 '
date_created: 2023-01-12T14:45:15Z
date_updated: 2023-01-12T14:48:42Z
department:
- _id: '630'
language:
- iso: eng
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '133'
name: 'TRR 285 - C: TRR 285 - Project Area C'
- _id: '146'
name: 'TRR 285 – C02: TRR 285 - Subproject C02'
status: public
title: Versatile tool design for a tumbling self-piercing riveting process
type: conference
user_id: '7850'
year: '2022'
...
---
_id: '36473'
abstract:
- lang: eng
text: "Destructive micrograph analysis (MA) is the standard method for the assessment
of clinched joints. However, during the joint preparation for the MA, geometric
features of the joint can change due to elastic effects and closing cracks. X-ray
computed tomography (CT) is a promising alternative to investigate the joint non-destructively.
However, if the\r\nmaterial properties of similar joining partners are the same,
the CT is not able to correctly resolve surfaces in the joint that are close to
or pressing onto each other. These surfaces are relevant for the determination
of characteristic dimensions such as neck thickness and undercut. By placing a
thin, highly radiopaque tin layer between the joining partners, the interfacial
area in the reconstructed volume can be highlighted. In this work, a method for
the localisation of the tin layer inside the joint as well as threshold value
procedures for the outer joint contour in cross section images are investigated.
The measured characteristic dimensions are compared with measured values from
MA of the same samples and of samples without tin layer. In addition, possible
effects of the tin layer on the joining point\r\ncharacteristics as well as problems
of the MA are discussed."
author:
- first_name: Matthias
full_name: Busch, Matthias
last_name: Busch
- first_name: 'Daniel '
full_name: 'Köhler, Daniel '
last_name: Köhler
- first_name: 'Tino '
full_name: 'Hausotte, Tino '
last_name: Hausotte
- first_name: 'Robert '
full_name: 'Kupfer, Robert '
last_name: Kupfer
- first_name: 'Juliane '
full_name: 'Troschitz, Juliane '
last_name: Troschitz
- first_name: 'Maik '
full_name: 'Gude, Maik '
last_name: Gude
citation:
ama: 'Busch M, Köhler D, Hausotte T, Kupfer R, Troschitz J, Gude M. Approach to
Determine the Characteristic Dimensions of Clinched Joints by Industrial X-ray
Computed Tomography. In: ; 2022.'
apa: Busch, M., Köhler, D., Hausotte, T., Kupfer, R., Troschitz, J., & Gude,
M. (2022). Approach to Determine the Characteristic Dimensions of Clinched
Joints by Industrial X-ray Computed Tomography. 4 th Singapore International
Non-destructive Testing Conference and Exhibition (SINCE2022).
bibtex: '@inproceedings{Busch_Köhler_Hausotte_Kupfer_Troschitz_Gude_2022, title={Approach
to Determine the Characteristic Dimensions of Clinched Joints by Industrial X-ray
Computed Tomography}, author={Busch, Matthias and Köhler, Daniel and Hausotte,
Tino and Kupfer, Robert and Troschitz, Juliane and Gude, Maik }, year={2022}
}'
chicago: Busch, Matthias, Daniel Köhler, Tino Hausotte, Robert Kupfer, Juliane Troschitz,
and Maik Gude. “Approach to Determine the Characteristic Dimensions of Clinched
Joints by Industrial X-Ray Computed Tomography,” 2022.
ieee: M. Busch, D. Köhler, T. Hausotte, R. Kupfer, J. Troschitz, and M. Gude, “Approach
to Determine the Characteristic Dimensions of Clinched Joints by Industrial X-ray
Computed Tomography,” presented at the 4 th Singapore International Non-destructive
Testing Conference and Exhibition (SINCE2022), 2022.
mla: Busch, Matthias, et al. Approach to Determine the Characteristic Dimensions
of Clinched Joints by Industrial X-Ray Computed Tomography. 2022.
short: 'M. Busch, D. Köhler, T. Hausotte, R. Kupfer, J. Troschitz, M. Gude, in:
2022.'
conference:
name: 4 th Singapore International Non-destructive Testing Conference and Exhibition
(SINCE2022)
date_created: 2023-01-12T14:56:56Z
date_updated: 2023-01-12T15:03:14Z
department:
- _id: '630'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.ndt.net/article/since2022/papers/SINCE_2022_paper_4764.pdf
oa: '1'
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '133'
name: 'TRR 285 - C: TRR 285 - Project Area C'
- _id: '148'
name: 'TRR 285 – C04: TRR 285 - Subproject C04'
- _id: '149'
name: 'TRR 285 – C05: TRR 285 - Subproject C05'
status: public
title: Approach to Determine the Characteristic Dimensions of Clinched Joints by Industrial
X-ray Computed Tomography
type: conference
user_id: '7850'
year: '2022'
...
---
_id: '33672'
abstract:
- lang: eng
text: "Abstract\r\n Lithium niobate
is a promising platform for integrated quantum optics. In this platform, we aim
to efficiently manipulate and detect quantum states by combining superconducting
single photon detectors and modulators. The cryogenic operation of a superconducting
single photon detector dictates the optimisation of the electro-optic modulators
under the same operating conditions. To that end, we characterise a phase modulator,
directional coupler, and polarisation converter at both ambient and cryogenic
temperatures. The operation voltage \r\n \r\n \r\n \r\n V\r\n
\ \r\n π\r\n
\ \r\n /\r\n
\ \r\n 2\r\n
\ \r\n \r\n
\ \r\n \r\n of these
modulators increases, due to the decrease in the electro-optic effect, by 74%
for the phase modulator, 84% for the directional coupler and 35% for the polarisation
converter below 8.5\r\n \r\n \r\n \r\n K\r\n \r\n \r\n
\ \r\n .
The phase modulator preserves its broadband nature and modulates light in the
characterised wavelength range. The unbiased bar state of the directional coupler
changed by a wavelength shift of 85\r\n \r\n \r\n \r\n n\r\n m\r\n
\ \r\n \r\n \r\n while cooling
the device down to 5\r\n \r\n \r\n \r\n K\r\n \r\n \r\n
\ \r\n .
The polarisation converter uses periodic poling to phasematch the two orthogonal
polarisations. The phasematched wavelength of the utilised poling changes by 112\r\n
\ \r\n
\ \r\n \r\n n\r\n m\r\n
\ \r\n \r\n \r\n when cooling
to 5\r\n \r\n
\ \r\n \r\n K\r\n \r\n \r\n
\ \r\n ."
article_number: '034004'
author:
- first_name: Frederik
full_name: Thiele, Frederik
id: '50819'
last_name: Thiele
orcid: 0000-0003-0663-5587
- first_name: Felix
full_name: vom Bruch, Felix
id: '71245'
last_name: vom Bruch
- first_name: Julian
full_name: Brockmeier, Julian
id: '44807'
last_name: Brockmeier
- first_name: Maximilian
full_name: Protte, Maximilian
id: '46170'
last_name: Protte
- first_name: Thomas
full_name: Hummel, Thomas
id: '83846'
last_name: Hummel
- first_name: Raimund
full_name: Ricken, Raimund
last_name: Ricken
- first_name: Viktor
full_name: Quiring, Viktor
last_name: Quiring
- first_name: Sebastian
full_name: Lengeling, Sebastian
id: '44373'
last_name: Lengeling
- first_name: Harald
full_name: Herrmann, Harald
id: '216'
last_name: Herrmann
- first_name: Christof
full_name: Eigner, Christof
id: '13244'
last_name: Eigner
orcid: https://orcid.org/0000-0002-5693-3083
- first_name: Christine
full_name: Silberhorn, Christine
id: '26263'
last_name: Silberhorn
- first_name: Tim
full_name: Bartley, Tim
id: '49683'
last_name: Bartley
citation:
ama: 'Thiele F, vom Bruch F, Brockmeier J, et al. Cryogenic electro-optic modulation
in titanium in-diffused lithium niobate waveguides. Journal of Physics: Photonics.
2022;4(3). doi:10.1088/2515-7647/ac6c63'
apa: 'Thiele, F., vom Bruch, F., Brockmeier, J., Protte, M., Hummel, T., Ricken,
R., Quiring, V., Lengeling, S., Herrmann, H., Eigner, C., Silberhorn, C., &
Bartley, T. (2022). Cryogenic electro-optic modulation in titanium in-diffused
lithium niobate waveguides. Journal of Physics: Photonics, 4(3),
Article 034004. https://doi.org/10.1088/2515-7647/ac6c63'
bibtex: '@article{Thiele_vom Bruch_Brockmeier_Protte_Hummel_Ricken_Quiring_Lengeling_Herrmann_Eigner_et
al._2022, title={Cryogenic electro-optic modulation in titanium in-diffused lithium
niobate waveguides}, volume={4}, DOI={10.1088/2515-7647/ac6c63},
number={3034004}, journal={Journal of Physics: Photonics}, publisher={IOP Publishing},
author={Thiele, Frederik and vom Bruch, Felix and Brockmeier, Julian and Protte,
Maximilian and Hummel, Thomas and Ricken, Raimund and Quiring, Viktor and Lengeling,
Sebastian and Herrmann, Harald and Eigner, Christof and et al.}, year={2022} }'
chicago: 'Thiele, Frederik, Felix vom Bruch, Julian Brockmeier, Maximilian Protte,
Thomas Hummel, Raimund Ricken, Viktor Quiring, et al. “Cryogenic Electro-Optic
Modulation in Titanium in-Diffused Lithium Niobate Waveguides.” Journal of
Physics: Photonics 4, no. 3 (2022). https://doi.org/10.1088/2515-7647/ac6c63.'
ieee: 'F. Thiele et al., “Cryogenic electro-optic modulation in titanium
in-diffused lithium niobate waveguides,” Journal of Physics: Photonics,
vol. 4, no. 3, Art. no. 034004, 2022, doi: 10.1088/2515-7647/ac6c63.'
mla: 'Thiele, Frederik, et al. “Cryogenic Electro-Optic Modulation in Titanium in-Diffused
Lithium Niobate Waveguides.” Journal of Physics: Photonics, vol. 4, no.
3, 034004, IOP Publishing, 2022, doi:10.1088/2515-7647/ac6c63.'
short: 'F. Thiele, F. vom Bruch, J. Brockmeier, M. Protte, T. Hummel, R. Ricken,
V. Quiring, S. Lengeling, H. Herrmann, C. Eigner, C. Silberhorn, T. Bartley, Journal
of Physics: Photonics 4 (2022).'
date_created: 2022-10-11T07:14:40Z
date_updated: 2023-01-12T15:16:35Z
department:
- _id: '15'
- _id: '230'
- _id: '623'
doi: 10.1088/2515-7647/ac6c63
intvolume: ' 4'
issue: '3'
keyword:
- Electrical and Electronic Engineering
- Atomic and Molecular Physics
- and Optics
- Electronic
- Optical and Magnetic Materials
language:
- iso: eng
publication: 'Journal of Physics: Photonics'
publication_identifier:
issn:
- 2515-7647
publication_status: published
publisher: IOP Publishing
status: public
title: Cryogenic electro-optic modulation in titanium in-diffused lithium niobate
waveguides
type: journal_article
user_id: '83846'
volume: 4
year: '2022'
...
---
_id: '33673'
abstract:
- lang: eng
text: Superconducting Nanowire Single Photon Detectors (SNSPDs) have become
an integral part of quantum optics in recent years because of their high performance
in single photon detection. We present a method to replace the electrical input
by supplying the required bias current via the photocurrent of a photodiode situated
on the cold stage of the cryostat. Light is guided to the bias photodiode through
an optical fiber, which enables a lower thermal conduction and galvanic isolation
between room temperature and the cold stage. We show that an off-the-shelf InGaAs–InP
photodiode exhibits a responsivity of at least 0.55 A/W at 0.8 K. Using this device
to bias an SNSPD, we characterize the count rate dependent on the optical power
incident on the photodiode. This configuration of the SNSPD and photodiode shows
an expected plateau in the single photon count rate with an optical bias power
on the photodiode above 6.8 µW. Furthermore, we compare the same detector under
both optical and electrical bias, and show there is no significant changes in
performance. This has the advantage of avoiding an electrical input cable, which
reduces the latent heat load by a factor of 100 and, in principle, allows for
low loss RF current supply at the cold stage.
article_number: '081303'
author:
- first_name: Frederik
full_name: Thiele, Frederik
id: '50819'
last_name: Thiele
orcid: 0000-0003-0663-5587
- first_name: Thomas
full_name: Hummel, Thomas
id: '83846'
last_name: Hummel
- first_name: Maximilian
full_name: Protte, Maximilian
id: '46170'
last_name: Protte
- first_name: Tim
full_name: Bartley, Tim
id: '49683'
last_name: Bartley
citation:
ama: Thiele F, Hummel T, Protte M, Bartley T. Opto-electronic bias of a superconducting
nanowire single photon detector using a cryogenic photodiode. APL Photonics.
2022;7(8). doi:10.1063/5.0097506
apa: Thiele, F., Hummel, T., Protte, M., & Bartley, T. (2022). Opto-electronic
bias of a superconducting nanowire single photon detector using a cryogenic photodiode.
APL Photonics, 7(8), Article 081303. https://doi.org/10.1063/5.0097506
bibtex: '@article{Thiele_Hummel_Protte_Bartley_2022, title={Opto-electronic bias
of a superconducting nanowire single photon detector using a cryogenic photodiode},
volume={7}, DOI={10.1063/5.0097506},
number={8081303}, journal={APL Photonics}, publisher={AIP Publishing}, author={Thiele,
Frederik and Hummel, Thomas and Protte, Maximilian and Bartley, Tim}, year={2022}
}'
chicago: Thiele, Frederik, Thomas Hummel, Maximilian Protte, and Tim Bartley. “Opto-Electronic
Bias of a Superconducting Nanowire Single Photon Detector Using a Cryogenic Photodiode.”
APL Photonics 7, no. 8 (2022). https://doi.org/10.1063/5.0097506.
ieee: 'F. Thiele, T. Hummel, M. Protte, and T. Bartley, “Opto-electronic bias of
a superconducting nanowire single photon detector using a cryogenic photodiode,”
APL Photonics, vol. 7, no. 8, Art. no. 081303, 2022, doi: 10.1063/5.0097506.'
mla: Thiele, Frederik, et al. “Opto-Electronic Bias of a Superconducting Nanowire
Single Photon Detector Using a Cryogenic Photodiode.” APL Photonics, vol.
7, no. 8, 081303, AIP Publishing, 2022, doi:10.1063/5.0097506.
short: F. Thiele, T. Hummel, M. Protte, T. Bartley, APL Photonics 7 (2022).
date_created: 2022-10-11T07:15:09Z
date_updated: 2023-01-12T15:13:40Z
department:
- _id: '15'
- _id: '230'
- _id: '623'
doi: 10.1063/5.0097506
intvolume: ' 7'
issue: '8'
keyword:
- Computer Networks and Communications
- Atomic and Molecular Physics
- and Optics
language:
- iso: eng
publication: APL Photonics
publication_identifier:
issn:
- 2378-0967
publication_status: published
publisher: AIP Publishing
status: public
title: Opto-electronic bias of a superconducting nanowire single photon detector using
a cryogenic photodiode
type: journal_article
user_id: '83846'
volume: 7
year: '2022'
...