---
_id: '52402'
abstract:
- lang: eng
text: Füllkörper spielen in industriellen Trennprozessen eine wichtige Rolle bspw.
bei der Reinigung industrieller Abgase durch Absorption. Die Trennleistung von
Füllkörperkolonnen wird üblicherweise mittels vereinfachter Stufenmodelle ermittelt,
deren Modellparameter experimentell bestimmt werden müssen. Dies stellt eine große
Schwäche von Stufenmodellen dar, da diese Parameterim Allgemeinen nicht auf verschiedene
Stoffsysteme und Füllkörpertypen übertragbar sind.In dieser Arbeit wird ein Modell,
basierend auf dem hydrodynamischen Analogieansatz, zur Beschreibung von Absorptionsvorgängen
in Füllkörperkolonnen vorgestellt. Dabei ist die Geometrie der festen Phase direkt
abhängig von der Füllkörpergeometrie und der Stochastik der Schüttung. Die tatsächlichen
Strömungsverhältnisse in Füllkörperkolonnen werden erfasst und durch eine Kombination
vereinfachter charakteristischer Strömungsformen reproduziert. Dies erlaubt die
Verwendung rigoroser Transportgleichung. Dadurch enthält das Modell weniger experimentell
zu ermittelnde Parameter und ist damit unabhängiger von Experimenten als vereinfachte
Stufenmodelle. Das Modell wurde gegen experimentelle Daten zur CO2-Absorption
in wässrige Natronlauge validiert. Mit dem entwickelten Modell wurde anschließend
eine Parameterstudie durchgeführt, die der Unterstützung der Entwicklung neuer
Füllkörpergeometrien dient. Dazu wurde eine Simulationsstudie durchgeführt, die
den Einfluss der Füllkörpergeometrie auf die Trennleistung untersucht.
- lang: eng
text: Random packings play an important role in industrial separation processes,
e.g., for the removal of pollutants from industrial off-gases by absorption. The
separation characteristics are commonly predicted by simplified stage models.
Such models employ several parameters which have to be determined by experiments.
This represents a major weakness of stage models, as, generally, these parameters
are not directly transferable to different chemical systems or packing types.
In this work, a model based on the hydrodynamic analogy approach is presented
to describe absorption processes in packed columns. The geometry of the solid
phase is directly dependent on the packing element geometry and the stochasticity
of the packing. The actual fluid dynamics in packed columns are captured and reproduced
by a combination of simplified characteristic flow patterns. This allows the application
of rigorous transport equations. Hence, the model contains fewer parameters to
be determined experimentally and is therefore more independent of experiments
than simplified stage models. The model was validated against experimental data
on CO2 absorption into aqueous sodium hydroxide solution. The developed model
was used to support the development of new packing types by "virtual experiments".
Therefore, a simulation study highlighting the influence of packing geometry on
separation efficiency was performed.
author:
- first_name: Alexander Heinrich Johannes
full_name: Salten, Alexander Heinrich Johannes
id: '59551'
last_name: Salten
orcid: 0000-0003-3069-9601
citation:
ama: Salten AHJ. Modellierung Der Reaktivabsorption in Regellosen Schüttungen
Und Modellbasierte Optimierung von Füllkörpern Mit Dem Ansatz Der Hydrodynamischen
Analogien. LibreCat University; 2023. doi:10.17619/UNIPB/1-1757
apa: Salten, A. H. J. (2023). Modellierung der Reaktivabsorption in regellosen
Schüttungen und modellbasierte Optimierung von Füllkörpern mit dem Ansatz der
hydrodynamischen Analogien. LibreCat University. https://doi.org/10.17619/UNIPB/1-1757
bibtex: '@book{Salten_2023, title={Modellierung der Reaktivabsorption in regellosen
Schüttungen und modellbasierte Optimierung von Füllkörpern mit dem Ansatz der
hydrodynamischen Analogien}, DOI={10.17619/UNIPB/1-1757},
publisher={LibreCat University}, author={Salten, Alexander Heinrich Johannes},
year={2023} }'
chicago: Salten, Alexander Heinrich Johannes. Modellierung Der Reaktivabsorption
in Regellosen Schüttungen Und Modellbasierte Optimierung von Füllkörpern Mit Dem
Ansatz Der Hydrodynamischen Analogien. LibreCat University, 2023. https://doi.org/10.17619/UNIPB/1-1757.
ieee: A. H. J. Salten, Modellierung der Reaktivabsorption in regellosen Schüttungen
und modellbasierte Optimierung von Füllkörpern mit dem Ansatz der hydrodynamischen
Analogien. LibreCat University, 2023.
mla: Salten, Alexander Heinrich Johannes. Modellierung Der Reaktivabsorption
in Regellosen Schüttungen Und Modellbasierte Optimierung von Füllkörpern Mit Dem
Ansatz Der Hydrodynamischen Analogien. LibreCat University, 2023, doi:10.17619/UNIPB/1-1757.
short: A.H.J. Salten, Modellierung Der Reaktivabsorption in Regellosen Schüttungen
Und Modellbasierte Optimierung von Füllkörpern Mit Dem Ansatz Der Hydrodynamischen
Analogien, LibreCat University, 2023.
date_created: 2024-03-08T13:47:50Z
date_updated: 2024-03-08T14:08:37Z
department:
- _id: '145'
doi: 10.17619/UNIPB/1-1757
language:
- iso: eng
publisher: LibreCat University
status: public
supervisor:
- first_name: Eugeny Y.
full_name: Kenig, Eugeny Y.
id: '665'
last_name: Kenig
title: Modellierung der Reaktivabsorption in regellosen Schüttungen und modellbasierte
Optimierung von Füllkörpern mit dem Ansatz der hydrodynamischen Analogien
type: dissertation
user_id: '59551'
year: '2023'
...
---
_id: '50547'
author:
- first_name: Viktor
full_name: Haak, Viktor
id: '60398'
last_name: Haak
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: 'Maike '
full_name: 'Epperlein, Maike '
last_name: Epperlein
- first_name: Alexander
full_name: Schiebahn, Alexander
last_name: Schiebahn
- first_name: Uwe
full_name: Reisgen, Uwe
last_name: Reisgen
citation:
ama: 'Haak V, Meschut G, Epperlein M, Schiebahn A, Reisgen U. Einseitiges Widerstandselementschweißen
für die stahlintensive Mischbauweise. In: 25. DVS-Sondertagung Widerstandsschweißen.
; 2023.'
apa: Haak, V., Meschut, G., Epperlein, M., Schiebahn, A., & Reisgen, U. (2023).
Einseitiges Widerstandselementschweißen für die stahlintensive Mischbauweise.
25. DVS-Sondertagung Widerstandsschweißen. 25. DVS-Sondertagung Widerstandsschweißen,
Duisburg.
bibtex: '@inproceedings{Haak_Meschut_Epperlein_Schiebahn_Reisgen_2023, title={Einseitiges
Widerstandselementschweißen für die stahlintensive Mischbauweise}, booktitle={25.
DVS-Sondertagung Widerstandsschweißen}, author={Haak, Viktor and Meschut, Gerson
and Epperlein, Maike and Schiebahn, Alexander and Reisgen, Uwe}, year={2023}
}'
chicago: Haak, Viktor, Gerson Meschut, Maike Epperlein, Alexander Schiebahn, and
Uwe Reisgen. “Einseitiges Widerstandselementschweißen für die stahlintensive Mischbauweise.”
In 25. DVS-Sondertagung Widerstandsschweißen, 2023.
ieee: V. Haak, G. Meschut, M. Epperlein, A. Schiebahn, and U. Reisgen, “Einseitiges
Widerstandselementschweißen für die stahlintensive Mischbauweise,” presented at
the 25. DVS-Sondertagung Widerstandsschweißen, Duisburg, 2023.
mla: Haak, Viktor, et al. “Einseitiges Widerstandselementschweißen für die stahlintensive
Mischbauweise.” 25. DVS-Sondertagung Widerstandsschweißen, 2023.
short: 'V. Haak, G. Meschut, M. Epperlein, A. Schiebahn, U. Reisgen, in: 25. DVS-Sondertagung
Widerstandsschweißen, 2023.'
conference:
end_date: 2023-06-29
location: Duisburg
name: 25. DVS-Sondertagung Widerstandsschweißen
start_date: 2023-06-28
date_created: 2024-01-16T14:06:43Z
date_updated: 2024-03-08T14:39:25Z
department:
- _id: '157'
language:
- iso: ger
publication: 25. DVS-Sondertagung Widerstandsschweißen
status: public
title: Einseitiges Widerstandselementschweißen für die stahlintensive Mischbauweise
type: conference
user_id: '60398'
year: '2023'
...
---
_id: '47551'
article_number: '108132'
author:
- first_name: Thorben
full_name: Hochhaus, Thorben
last_name: Hochhaus
- first_name: Bastian
full_name: Bruns, Bastian
last_name: Bruns
- first_name: Marcus
full_name: Grünewald, Marcus
last_name: Grünewald
- first_name: Julia
full_name: Riese, Julia
id: '101499'
last_name: Riese
orcid: 0000-0002-3053-0534
citation:
ama: 'Hochhaus T, Bruns B, Grünewald M, Riese J. Optimal scheduling of a large-scale
power-to-ammonia process: Effects of parameter optimization on the indirect demand
response potential. Computers & Chemical Engineering. 2023;170. doi:10.1016/j.compchemeng.2023.108132'
apa: 'Hochhaus, T., Bruns, B., Grünewald, M., & Riese, J. (2023). Optimal scheduling
of a large-scale power-to-ammonia process: Effects of parameter optimization on
the indirect demand response potential. Computers & Chemical Engineering,
170, Article 108132. https://doi.org/10.1016/j.compchemeng.2023.108132'
bibtex: '@article{Hochhaus_Bruns_Grünewald_Riese_2023, title={Optimal scheduling
of a large-scale power-to-ammonia process: Effects of parameter optimization on
the indirect demand response potential}, volume={170}, DOI={10.1016/j.compchemeng.2023.108132},
number={108132}, journal={Computers & Chemical Engineering}, publisher={Elsevier
BV}, author={Hochhaus, Thorben and Bruns, Bastian and Grünewald, Marcus and Riese,
Julia}, year={2023} }'
chicago: 'Hochhaus, Thorben, Bastian Bruns, Marcus Grünewald, and Julia Riese. “Optimal
Scheduling of a Large-Scale Power-to-Ammonia Process: Effects of Parameter Optimization
on the Indirect Demand Response Potential.” Computers & Chemical Engineering
170 (2023). https://doi.org/10.1016/j.compchemeng.2023.108132.'
ieee: 'T. Hochhaus, B. Bruns, M. Grünewald, and J. Riese, “Optimal scheduling of
a large-scale power-to-ammonia process: Effects of parameter optimization on the
indirect demand response potential,” Computers & Chemical Engineering,
vol. 170, Art. no. 108132, 2023, doi: 10.1016/j.compchemeng.2023.108132.'
mla: 'Hochhaus, Thorben, et al. “Optimal Scheduling of a Large-Scale Power-to-Ammonia
Process: Effects of Parameter Optimization on the Indirect Demand Response Potential.”
Computers & Chemical Engineering, vol. 170, 108132, Elsevier BV, 2023,
doi:10.1016/j.compchemeng.2023.108132.'
short: T. Hochhaus, B. Bruns, M. Grünewald, J. Riese, Computers & Chemical Engineering
170 (2023).
date_created: 2023-10-04T14:11:47Z
date_updated: 2024-03-08T11:30:41Z
doi: 10.1016/j.compchemeng.2023.108132
extern: '1'
intvolume: ' 170'
keyword:
- Computer Science Applications
- General Chemical Engineering
language:
- iso: eng
publication: Computers & Chemical Engineering
publication_identifier:
issn:
- 0098-1354
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: 'Optimal scheduling of a large-scale power-to-ammonia process: Effects of parameter
optimization on the indirect demand response potential'
type: journal_article
user_id: '101499'
volume: 170
year: '2023'
...
---
_id: '51360'
author:
- first_name: 'Lilli Sophia '
full_name: 'Röder, Lilli Sophia '
last_name: Röder
- first_name: Arne
full_name: Gröngröft, Arne
last_name: Gröngröft
- first_name: 'Marcus '
full_name: 'Grünewald, Marcus '
last_name: Grünewald
- first_name: Julia
full_name: Riese, Julia
id: '101499'
last_name: Riese
orcid: 0000-0002-3053-0534
citation:
ama: Röder LS, Gröngröft A, Grünewald M, Riese J. Demand Side Management Implementation
in Downstream Digestate Treatment of a Biomethane Biorefinery. Chemical Engineering
Transactions. 2023;105:421-426. doi:10.3303/CET23105071
apa: Röder, L. S., Gröngröft, A., Grünewald, M., & Riese, J. (2023). Demand
Side Management Implementation in Downstream Digestate Treatment of a Biomethane
Biorefinery. Chemical Engineering Transactions, 105, 421–426. https://doi.org/10.3303/CET23105071
bibtex: '@article{Röder_Gröngröft_Grünewald_Riese_2023, title={Demand Side Management
Implementation in Downstream Digestate Treatment of a Biomethane Biorefinery},
volume={105}, DOI={10.3303/CET23105071},
journal={Chemical Engineering Transactions}, author={Röder, Lilli Sophia and
Gröngröft, Arne and Grünewald, Marcus and Riese, Julia}, year={2023}, pages={421–426}
}'
chicago: 'Röder, Lilli Sophia , Arne Gröngröft, Marcus Grünewald, and Julia Riese.
“Demand Side Management Implementation in Downstream Digestate Treatment of a
Biomethane Biorefinery.” Chemical Engineering Transactions 105 (2023):
421–26. https://doi.org/10.3303/CET23105071.'
ieee: 'L. S. Röder, A. Gröngröft, M. Grünewald, and J. Riese, “Demand Side Management
Implementation in Downstream Digestate Treatment of a Biomethane Biorefinery,”
Chemical Engineering Transactions, vol. 105, pp. 421–426, 2023, doi: 10.3303/CET23105071.'
mla: Röder, Lilli Sophia, et al. “Demand Side Management Implementation in Downstream
Digestate Treatment of a Biomethane Biorefinery.” Chemical Engineering Transactions,
vol. 105, 2023, pp. 421–26, doi:10.3303/CET23105071.
short: L.S. Röder, A. Gröngröft, M. Grünewald, J. Riese, Chemical Engineering Transactions
105 (2023) 421–426.
date_created: 2024-02-16T14:07:51Z
date_updated: 2024-03-08T11:30:32Z
department:
- _id: '145'
doi: 10.3303/CET23105071
intvolume: ' 105'
language:
- iso: eng
page: 421-426
publication: Chemical Engineering Transactions
quality_controlled: '1'
status: public
title: Demand Side Management Implementation in Downstream Digestate Treatment of
a Biomethane Biorefinery
type: journal_article
user_id: '101499'
volume: 105
year: '2023'
...
---
_id: '49580'
abstract:
- lang: eng
text: AbstractThe time‐dependent adjustment of
a system's power demand simultaneously with current power generation is commonly
referred to as demand side management (DSM). DSM strategies are based on the flexibility
to purchase electricity at times when prices are low, which can result in monetary
benefits. One option to increase the flexibility of continuously operated processes
is to oversize them. From an economic point of view, this leads to an increased
investment. DSM only serves an economic purpose if the monetary benefits exceed
this increase in capital costs. The main goal of this contribution is to develop
a decision support tool to help evaluate unit operations regarding their feasibility
for DSM implementation. In a case study, the decision support tool was applied
to show its functionality on a biomethane production plant. The results show that
with the help of the decision support tool, evaluating unit operations concerning
their economic DSM potential is possible.
author:
- first_name: Lilli
full_name: Röder, Lilli
last_name: Röder
- first_name: Hendrik
full_name: Etzold, Hendrik
last_name: Etzold
- first_name: Arne
full_name: Gröngröft, Arne
last_name: Gröngröft
- first_name: Marcus
full_name: Grünewald, Marcus
last_name: Grünewald
- first_name: Julia
full_name: Riese, Julia
id: '101499'
last_name: Riese
orcid: 0000-0002-3053-0534
citation:
ama: Röder L, Etzold H, Gröngröft A, Grünewald M, Riese J. Decision support tool
to determine the suitability of demand side management implementation in continuously
operated processes – A biorefinery case study. Biofuels, Bioproducts and Biorefining.
Published online 2023. doi:10.1002/bbb.2558
apa: Röder, L., Etzold, H., Gröngröft, A., Grünewald, M., & Riese, J. (2023).
Decision support tool to determine the suitability of demand side management implementation
in continuously operated processes – A biorefinery case study. Biofuels, Bioproducts
and Biorefining. https://doi.org/10.1002/bbb.2558
bibtex: '@article{Röder_Etzold_Gröngröft_Grünewald_Riese_2023, title={Decision support
tool to determine the suitability of demand side management implementation in
continuously operated processes – A biorefinery case study}, DOI={10.1002/bbb.2558},
journal={Biofuels, Bioproducts and Biorefining}, publisher={Wiley}, author={Röder,
Lilli and Etzold, Hendrik and Gröngröft, Arne and Grünewald, Marcus and Riese,
Julia}, year={2023} }'
chicago: Röder, Lilli, Hendrik Etzold, Arne Gröngröft, Marcus Grünewald, and Julia
Riese. “Decision Support Tool to Determine the Suitability of Demand Side Management
Implementation in Continuously Operated Processes – A Biorefinery Case Study.”
Biofuels, Bioproducts and Biorefining, 2023. https://doi.org/10.1002/bbb.2558.
ieee: 'L. Röder, H. Etzold, A. Gröngröft, M. Grünewald, and J. Riese, “Decision
support tool to determine the suitability of demand side management implementation
in continuously operated processes – A biorefinery case study,” Biofuels, Bioproducts
and Biorefining, 2023, doi: 10.1002/bbb.2558.'
mla: Röder, Lilli, et al. “Decision Support Tool to Determine the Suitability of
Demand Side Management Implementation in Continuously Operated Processes – A Biorefinery
Case Study.” Biofuels, Bioproducts and Biorefining, Wiley, 2023, doi:10.1002/bbb.2558.
short: L. Röder, H. Etzold, A. Gröngröft, M. Grünewald, J. Riese, Biofuels, Bioproducts
and Biorefining (2023).
date_created: 2023-12-13T11:09:13Z
date_updated: 2024-03-08T11:32:00Z
department:
- _id: '831'
doi: 10.1002/bbb.2558
keyword:
- Renewable Energy
- Sustainability and the Environment
- Bioengineering
language:
- iso: eng
publication: Biofuels, Bioproducts and Biorefining
publication_identifier:
issn:
- 1932-104X
- 1932-1031
publication_status: published
publisher: Wiley
quality_controlled: '1'
status: public
title: Decision support tool to determine the suitability of demand side management
implementation in continuously operated processes – A biorefinery case study
type: journal_article
user_id: '101499'
year: '2023'
...
---
_id: '50212'
author:
- first_name: Verónica
full_name: Abrego, Verónica
last_name: Abrego
- first_name: Ina
full_name: Henke, Ina
last_name: Henke
- first_name: Magdalena
full_name: Kißling, Magdalena
id: '86552'
last_name: Kißling
- first_name: Christina
full_name: Lammer, Christina
id: '84580'
last_name: Lammer
- first_name: Maria-Th.
full_name: Leuker, Maria-Th.
last_name: Leuker
citation:
ama: 'Abrego V, Henke I, Kißling M, Lammer C, Leuker M-Th. Intersektionalität und
erzählte Welten – Einführung. In: Abgrego V, Henke I, Kißling M, Lammer C, Leuker
M-Th, eds. Intersektionalität Und Erzählte Welten. Fachwissenschaftliche Und
Fachdidaktische Perspektiven Auf Literatur Und Medien. WBG; 2023:11-34. doi:https://doi.org/10.21248/gups.73811'
apa: Abrego, V., Henke, I., Kißling, M., Lammer, C., & Leuker, M.-Th. (2023).
Intersektionalität und erzählte Welten – Einführung. In V. Abgrego, I. Henke,
M. Kißling, C. Lammer, & M.-Th. Leuker (Eds.), Intersektionalität und erzählte
Welten. Fachwissenschaftliche und fachdidaktische Perspektiven auf Literatur und
Medien (pp. 11–34). WBG. https://doi.org/10.21248/gups.73811
bibtex: '@inbook{Abrego_Henke_Kißling_Lammer_Leuker_2023, place={Darmstadt}, title={Intersektionalität
und erzählte Welten – Einführung}, DOI={https://doi.org/10.21248/gups.73811},
booktitle={Intersektionalität und erzählte Welten. Fachwissenschaftliche und fachdidaktische
Perspektiven auf Literatur und Medien}, publisher={WBG}, author={Abrego, Verónica
and Henke, Ina and Kißling, Magdalena and Lammer, Christina and Leuker, Maria-Th.},
editor={Abgrego, Verónica and Henke, Ina and Kißling, Magdalena and Lammer, Christina
and Leuker, Maria-Th.}, year={2023}, pages={11–34} }'
chicago: 'Abrego, Verónica, Ina Henke, Magdalena Kißling, Christina Lammer, and
Maria-Th. Leuker. “Intersektionalität Und Erzählte Welten – Einführung.” In Intersektionalität
Und Erzählte Welten. Fachwissenschaftliche Und Fachdidaktische Perspektiven Auf
Literatur Und Medien, edited by Verónica Abgrego, Ina Henke, Magdalena Kißling,
Christina Lammer, and Maria-Th. Leuker, 11–34. Darmstadt: WBG, 2023. https://doi.org/10.21248/gups.73811.'
ieee: 'V. Abrego, I. Henke, M. Kißling, C. Lammer, and M.-Th. Leuker, “Intersektionalität
und erzählte Welten – Einführung,” in Intersektionalität und erzählte Welten.
Fachwissenschaftliche und fachdidaktische Perspektiven auf Literatur und Medien,
V. Abgrego, I. Henke, M. Kißling, C. Lammer, and M.-Th. Leuker, Eds. Darmstadt:
WBG, 2023, pp. 11–34.'
mla: Abrego, Verónica, et al. “Intersektionalität Und Erzählte Welten – Einführung.”
Intersektionalität Und Erzählte Welten. Fachwissenschaftliche Und Fachdidaktische
Perspektiven Auf Literatur Und Medien, edited by Verónica Abgrego et al.,
WBG, 2023, pp. 11–34, doi:https://doi.org/10.21248/gups.73811.
short: 'V. Abrego, I. Henke, M. Kißling, C. Lammer, M.-Th. Leuker, in: V. Abgrego,
I. Henke, M. Kißling, C. Lammer, M.-Th. Leuker (Eds.), Intersektionalität Und
Erzählte Welten. Fachwissenschaftliche Und Fachdidaktische Perspektiven Auf Literatur
Und Medien, WBG, Darmstadt, 2023, pp. 11–34.'
date_created: 2024-01-04T20:17:05Z
date_updated: 2024-03-08T12:01:34Z
doi: https://doi.org/10.21248/gups.73811
editor:
- first_name: Verónica
full_name: Abgrego, Verónica
last_name: Abgrego
- first_name: Ina
full_name: Henke, Ina
last_name: Henke
- first_name: Magdalena
full_name: Kißling, Magdalena
last_name: Kißling
- first_name: Christina
full_name: Lammer, Christina
last_name: Lammer
- first_name: Maria-Th.
full_name: Leuker, Maria-Th.
last_name: Leuker
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://publikationen.ub.uni-frankfurt.de/opus4/frontdoor/deliver/index/docId/73811/file/Intersektionalitaet_Einleitung.pdf
oa: '1'
page: 11-34
place: Darmstadt
publication: Intersektionalität und erzählte Welten. Fachwissenschaftliche und fachdidaktische
Perspektiven auf Literatur und Medien
publisher: WBG
status: public
title: Intersektionalität und erzählte Welten – Einführung
type: book_chapter
user_id: '84580'
year: '2023'
...
---
_id: '52389'
author:
- first_name: Christina
full_name: Lammer, Christina
id: '84580'
last_name: Lammer
citation:
ama: Lammer C. Het verschil tussen strips en graphic novels (in Vlaanderen).
BelgienNet; 2023.
apa: Lammer, C. (2023). Het verschil tussen strips en graphic novels (in Vlaanderen).
BelgienNet.
bibtex: '@book{Lammer_2023, title={Het verschil tussen strips en graphic novels
(in Vlaanderen)}, publisher={BelgienNet}, author={Lammer, Christina}, year={2023}
}'
chicago: Lammer, Christina. Het verschil tussen strips en graphic novels (in
Vlaanderen). BelgienNet, 2023.
ieee: C. Lammer, Het verschil tussen strips en graphic novels (in Vlaanderen).
BelgienNet, 2023.
mla: Lammer, Christina. Het verschil tussen strips en graphic novels (in Vlaanderen).
BelgienNet, 2023.
short: C. Lammer, Het verschil tussen strips en graphic novels (in Vlaanderen),
BelgienNet, 2023.
date_created: 2024-03-08T11:57:13Z
date_updated: 2024-03-08T11:57:24Z
language:
- iso: dut
main_file_link:
- open_access: '1'
url: https://belgien.net/nl/strips-en-graphic-novels/
oa: '1'
publisher: BelgienNet
status: public
title: Het verschil tussen strips en graphic novels (in Vlaanderen)
type: misc
user_id: '84580'
year: '2023'
...
---
_id: '52204'
article_type: review
author:
- first_name: Matteo
full_name: Genovese, Matteo
last_name: Genovese
- first_name: Alexander
full_name: Schlüter, Alexander
id: '103302'
last_name: Schlüter
orcid: 0000-0002-2569-1624
- first_name: Eugenio
full_name: Scionti, Eugenio
last_name: Scionti
- first_name: Francesco
full_name: Piraino, Francesco
last_name: Piraino
- first_name: Orlando
full_name: Corigliano, Orlando
last_name: Corigliano
- first_name: Petronilla
full_name: Fragiacomo, Petronilla
last_name: Fragiacomo
citation:
ama: Genovese M, Schlüter A, Scionti E, Piraino F, Corigliano O, Fragiacomo P. Power-to-hydrogen
and hydrogen-to-X energy systems for the industry of the future in Europe. International
Journal of Hydrogen Energy. 2023;48(44):16545-16568. doi:10.1016/j.ijhydene.2023.01.194
apa: Genovese, M., Schlüter, A., Scionti, E., Piraino, F., Corigliano, O., &
Fragiacomo, P. (2023). Power-to-hydrogen and hydrogen-to-X energy systems for
the industry of the future in Europe. International Journal of Hydrogen Energy,
48(44), 16545–16568. https://doi.org/10.1016/j.ijhydene.2023.01.194
bibtex: '@article{Genovese_Schlüter_Scionti_Piraino_Corigliano_Fragiacomo_2023,
title={Power-to-hydrogen and hydrogen-to-X energy systems for the industry of
the future in Europe}, volume={48}, DOI={10.1016/j.ijhydene.2023.01.194},
number={44}, journal={International Journal of Hydrogen Energy}, publisher={Elsevier
BV}, author={Genovese, Matteo and Schlüter, Alexander and Scionti, Eugenio and
Piraino, Francesco and Corigliano, Orlando and Fragiacomo, Petronilla}, year={2023},
pages={16545–16568} }'
chicago: 'Genovese, Matteo, Alexander Schlüter, Eugenio Scionti, Francesco Piraino,
Orlando Corigliano, and Petronilla Fragiacomo. “Power-to-Hydrogen and Hydrogen-to-X
Energy Systems for the Industry of the Future in Europe.” International Journal
of Hydrogen Energy 48, no. 44 (2023): 16545–68. https://doi.org/10.1016/j.ijhydene.2023.01.194.'
ieee: 'M. Genovese, A. Schlüter, E. Scionti, F. Piraino, O. Corigliano, and P. Fragiacomo,
“Power-to-hydrogen and hydrogen-to-X energy systems for the industry of the future
in Europe,” International Journal of Hydrogen Energy, vol. 48, no. 44,
pp. 16545–16568, 2023, doi: 10.1016/j.ijhydene.2023.01.194.'
mla: Genovese, Matteo, et al. “Power-to-Hydrogen and Hydrogen-to-X Energy Systems
for the Industry of the Future in Europe.” International Journal of Hydrogen
Energy, vol. 48, no. 44, Elsevier BV, 2023, pp. 16545–68, doi:10.1016/j.ijhydene.2023.01.194.
short: M. Genovese, A. Schlüter, E. Scionti, F. Piraino, O. Corigliano, P. Fragiacomo,
International Journal of Hydrogen Energy 48 (2023) 16545–16568.
date_created: 2024-02-29T09:47:57Z
date_updated: 2024-03-08T19:49:10Z
department:
- _id: '9'
- _id: '876'
doi: 10.1016/j.ijhydene.2023.01.194
intvolume: ' 48'
issue: '44'
keyword:
- Hydrogen economy
- Green hydrogen
- Power-to-X
- Hydrogen-to-X
- Sector coupling
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://doi.org/10.1016/j.ijhydene.2023.01.194
oa: '1'
page: 16545-16568
publication: International Journal of Hydrogen Energy
publication_identifier:
issn:
- 0360-3199
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Power-to-hydrogen and hydrogen-to-X energy systems for the industry of the
future in Europe
type: journal_article
user_id: '103302'
volume: 48
year: '2023'
...
---
_id: '50171'
abstract:
- lang: eng
text: "We use QCD kinetic theory to compute photon production in the chemically\r\nequilibrating
Quark-Gluon Plasma created in the early stages of high-energy\r\nheavy-ion collisions.
We do a detailed comparison of pre-equilibrium photon\r\nrates to the thermal
photon production. We show that the photon spectrum\r\nradiated from a hydrodynamic
attractor evolution satisfies a simple scaling\r\nform in terms of the specific
shear viscosity $\\eta/s$ and entropy density\r\n$dS/d\\zeta \\sim {\\scriptstyle
\\left(T\\tau^{1/3}\\right)^{3/2}}_\\infty$. We\r\nconfirm the analytical predictions
with numerical kinetic theory simulations.\r\nWe use the extracted scaling function
to compute the pre-equilibrium photon\r\ncontribution in $\\sqrt{s_{NN}}=2.76\\,\\text{TeV}$
0-20\\% PbPb collisions. We\r\ndemonstrate that our matching procedure allows
for a smooth switching from\r\npre-equilibrium kinetic to thermal hydrodynamic
photon production. Finally, our\r\npublicly available implementation can be straightforwardly
added to existing\r\nheavy ion models."
author:
- first_name: Oscar Garcia-Montero
full_name: Oscar Garcia-Montero, Oscar Garcia-Montero
last_name: Oscar Garcia-Montero
- first_name: Aleksas
full_name: Mazeliauskas, Aleksas
last_name: Mazeliauskas
- first_name: Philip
full_name: Plaschke, Philip
last_name: Plaschke
- first_name: Sören
full_name: Schlichting, Sören
last_name: Schlichting
citation:
ama: Oscar Garcia-Montero OG-M, Mazeliauskas A, Plaschke P, Schlichting S. Pre-equilibrium
photons from the early stages of heavy-ion collisions. arXiv:230809747.
Published online 2023.
apa: Oscar Garcia-Montero, O. G.-M., Mazeliauskas, A., Plaschke, P., & Schlichting,
S. (2023). Pre-equilibrium photons from the early stages of heavy-ion collisions.
In arXiv:2308.09747.
bibtex: '@article{Oscar Garcia-Montero_Mazeliauskas_Plaschke_Schlichting_2023, title={Pre-equilibrium
photons from the early stages of heavy-ion collisions}, journal={arXiv:2308.09747},
author={Oscar Garcia-Montero, Oscar Garcia-Montero and Mazeliauskas, Aleksas and
Plaschke, Philip and Schlichting, Sören}, year={2023} }'
chicago: Oscar Garcia-Montero, Oscar Garcia-Montero, Aleksas Mazeliauskas, Philip
Plaschke, and Sören Schlichting. “Pre-Equilibrium Photons from the Early Stages
of Heavy-Ion Collisions.” ArXiv:2308.09747, 2023.
ieee: O. G.-M. Oscar Garcia-Montero, A. Mazeliauskas, P. Plaschke, and S. Schlichting,
“Pre-equilibrium photons from the early stages of heavy-ion collisions,” arXiv:2308.09747.
2023.
mla: Oscar Garcia-Montero, Oscar Garcia-Montero, et al. “Pre-Equilibrium Photons
from the Early Stages of Heavy-Ion Collisions.” ArXiv:2308.09747, 2023.
short: O.G.-M. Oscar Garcia-Montero, A. Mazeliauskas, P. Plaschke, S. Schlichting,
ArXiv:2308.09747 (2023).
date_created: 2024-01-04T08:46:29Z
date_updated: 2024-03-08T15:58:55Z
external_id:
arxiv:
- '2308.09747'
language:
- iso: eng
project:
- _id: '52'
name: 'PC2: Computing Resources Provided by the Paderborn Center for Parallel Computing'
publication: arXiv:2308.09747
status: public
title: Pre-equilibrium photons from the early stages of heavy-ion collisions
type: preprint
user_id: '16153'
year: '2023'
...
---
_id: '48010'
author:
- first_name: Jennifer Nicole
full_name: Schneider, Jennifer Nicole
id: '49590'
last_name: Schneider
citation:
ama: Schneider JN. Open Educational Resources in der beruflichen Bildungslandschaft.
apa: Schneider, J. N. (n.d.). Open Educational Resources in der beruflichen Bildungslandschaft.
bibtex: '@book{Schneider, title={Open Educational Resources in der beruflichen Bildungslandschaft},
author={Schneider, Jennifer Nicole} }'
chicago: Schneider, Jennifer Nicole. Open Educational Resources in der beruflichen
Bildungslandschaft, n.d.
ieee: J. N. Schneider, Open Educational Resources in der beruflichen Bildungslandschaft.
.
mla: Schneider, Jennifer Nicole. Open Educational Resources in der beruflichen
Bildungslandschaft.
short: J.N. Schneider, Open Educational Resources in der beruflichen Bildungslandschaft,
n.d.
date_created: 2023-10-11T12:59:00Z
date_updated: 2024-03-08T17:02:37Z
ddc:
- '150'
department:
- _id: '210'
file:
- access_level: closed
content_type: application/pdf
creator: jsc
date_created: 2024-03-08T17:02:01Z
date_updated: 2024-03-08T17:02:01Z
file_id: '52407'
file_name: Dissertation-Schneider Jennifer 2022.pdf
file_size: 4695783
relation: main_file
success: 1
file_date_updated: 2024-03-08T17:02:01Z
language:
- iso: ger
publication_status: inpress
status: public
supervisor:
- first_name: Marc
full_name: Beutner, Marc
id: '21118'
last_name: Beutner
title: Open Educational Resources in der beruflichen Bildungslandschaft
type: dissertation
user_id: '49590'
year: '2023'
...
---
_id: '40645'
article_type: original
author:
- first_name: Abbas Jarullah Sangoor
full_name: Al-Lami, Abbas Jarullah Sangoor
id: '81772'
last_name: Al-Lami
- first_name: Eugeny
full_name: Kenig, Eugeny
id: '665'
last_name: Kenig
citation:
ama: Al-Lami AJS, Kenig E. Experimental Study of an Internally Channeled Tube Heat
Exchanger under Turbulent Flow Conditions. International Journal of Heat and
Mass Transfer. 2023;214:1-10. doi:10.1016/j.ijheatmasstransfer.2023.124425
apa: Al-Lami, A. J. S., & Kenig, E. (2023). Experimental Study of an Internally
Channeled Tube Heat Exchanger under Turbulent Flow Conditions. International
Journal of Heat and Mass Transfer, 214, 1–10. https://doi.org/10.1016/j.ijheatmasstransfer.2023.124425
bibtex: '@article{Al-Lami_Kenig_2023, title={Experimental Study of an Internally
Channeled Tube Heat Exchanger under Turbulent Flow Conditions}, volume={214},
DOI={10.1016/j.ijheatmasstransfer.2023.124425},
journal={International Journal of Heat and Mass Transfer}, publisher={Elsevier},
author={Al-Lami, Abbas Jarullah Sangoor and Kenig, Eugeny}, year={2023}, pages={1–10}
}'
chicago: 'Al-Lami, Abbas Jarullah Sangoor, and Eugeny Kenig. “Experimental Study
of an Internally Channeled Tube Heat Exchanger under Turbulent Flow Conditions.”
International Journal of Heat and Mass Transfer 214 (2023): 1–10. https://doi.org/10.1016/j.ijheatmasstransfer.2023.124425.'
ieee: 'A. J. S. Al-Lami and E. Kenig, “Experimental Study of an Internally Channeled
Tube Heat Exchanger under Turbulent Flow Conditions,” International Journal
of Heat and Mass Transfer, vol. 214, pp. 1–10, 2023, doi: 10.1016/j.ijheatmasstransfer.2023.124425.'
mla: Al-Lami, Abbas Jarullah Sangoor, and Eugeny Kenig. “Experimental Study of an
Internally Channeled Tube Heat Exchanger under Turbulent Flow Conditions.” International
Journal of Heat and Mass Transfer, vol. 214, Elsevier, 2023, pp. 1–10, doi:10.1016/j.ijheatmasstransfer.2023.124425.
short: A.J.S. Al-Lami, E. Kenig, International Journal of Heat and Mass Transfer
214 (2023) 1–10.
date_created: 2023-01-30T10:05:59Z
date_updated: 2024-03-09T08:34:09Z
doi: 10.1016/j.ijheatmasstransfer.2023.124425
has_accepted_license: '1'
intvolume: ' 214'
language:
- iso: eng
page: 1-10
publication: International Journal of Heat and Mass Transfer
publication_identifier:
unknown:
- 0017-9310
publication_status: published
publisher: Elsevier
quality_controlled: '1'
status: public
title: Experimental Study of an Internally Channeled Tube Heat Exchanger under Turbulent
Flow Conditions
type: journal_article
user_id: '81772'
volume: 214
year: '2023'
...
---
_id: '43090'
abstract:
- lang: eng
text: Abstract. The application of the mechanical joining process clinching
allows the assembly of different sheet metal materials with a wide range of material
thickness configurations, which is of interest for lightweight multi-material
structures. In order to be able to predict the clinched joint properties as a
function of the individual manufacturing steps, current studies focus on numerical
modeling of the entire clinching process chain. It is essential to be able to
take into account the influence of the joining process-induced damage on the load-bearing
capacity of the joint during the loading phase. This study presents a numerical
damage accumulation in the clinching process based on an implemented Hosford-Coulomb
failure model using a 3D clinching process model applied on the aluminum alloy
EN AW-6014 in temper T4. A correspondence of the experimentally determined failure
location with the element of the highest numerically determined damage accumulation
is shown. Moreover, the experimentally determined failure behavior is predicted
to be in agreement in the numerical loading simulation with transferred pre-damage
from the process simulation.
author:
- first_name: Christian Roman
full_name: Bielak, Christian Roman
id: '34782'
last_name: Bielak
- first_name: Max
full_name: Böhnke, Max
id: '45779'
last_name: Böhnke
- first_name: Johannes
full_name: Friedlein, Johannes
last_name: Friedlein
- first_name: Mathias
full_name: Bobbert, Mathias
id: '7850'
last_name: Bobbert
- first_name: Julia
full_name: Mergheim, Julia
last_name: Mergheim
- first_name: Paul
full_name: Steinmann, Paul
last_name: Steinmann
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Bielak CR, Böhnke M, Friedlein J, et al. Numerical analysis of failure modeling
in clinching process chain simulation. In: Materials Research Proceedings.
Materials Research Forum LLC; 2023. doi:10.21741/9781644902417-33'
apa: Bielak, C. R., Böhnke, M., Friedlein, J., Bobbert, M., Mergheim, J., Steinmann,
P., & Meschut, G. (2023). Numerical analysis of failure modeling in clinching
process chain simulation. Materials Research Proceedings. SHEMET 2023.
https://doi.org/10.21741/9781644902417-33
bibtex: '@inproceedings{Bielak_Böhnke_Friedlein_Bobbert_Mergheim_Steinmann_Meschut_2023,
title={Numerical analysis of failure modeling in clinching process chain simulation},
DOI={10.21741/9781644902417-33},
booktitle={Materials Research Proceedings}, publisher={Materials Research Forum
LLC}, author={Bielak, Christian Roman and Böhnke, Max and Friedlein, Johannes
and Bobbert, Mathias and Mergheim, Julia and Steinmann, Paul and Meschut, Gerson},
year={2023} }'
chicago: Bielak, Christian Roman, Max Böhnke, Johannes Friedlein, Mathias Bobbert,
Julia Mergheim, Paul Steinmann, and Gerson Meschut. “Numerical Analysis of Failure
Modeling in Clinching Process Chain Simulation.” In Materials Research Proceedings.
Materials Research Forum LLC, 2023. https://doi.org/10.21741/9781644902417-33.
ieee: 'C. R. Bielak et al., “Numerical analysis of failure modeling in clinching
process chain simulation,” presented at the SHEMET 2023, 2023, doi: 10.21741/9781644902417-33.'
mla: Bielak, Christian Roman, et al. “Numerical Analysis of Failure Modeling in
Clinching Process Chain Simulation.” Materials Research Proceedings, Materials
Research Forum LLC, 2023, doi:10.21741/9781644902417-33.
short: 'C.R. Bielak, M. Böhnke, J. Friedlein, M. Bobbert, J. Mergheim, P. Steinmann,
G. Meschut, in: Materials Research Proceedings, Materials Research Forum LLC,
2023.'
conference:
name: SHEMET 2023
date_created: 2023-03-23T08:13:30Z
date_updated: 2024-03-11T08:14:08Z
department:
- _id: '157'
doi: 10.21741/9781644902417-33
language:
- iso: eng
project:
- _id: '131'
name: 'TRR 285 - A: TRR 285 - Project Area A'
- _id: '135'
name: 'TRR 285 – A01: TRR 285 - Subproject A01'
- _id: '139'
name: 'TRR 285 – A05: TRR 285 - Subproject A05'
publication: Materials Research Proceedings
publication_identifier:
issn:
- 2474-395X
publication_status: published
publisher: Materials Research Forum LLC
quality_controlled: '1'
status: public
title: Numerical analysis of failure modeling in clinching process chain simulation
type: conference
user_id: '45779'
year: '2023'
...
---
_id: '43462'
abstract:
- lang: eng
text: Abstract. In the numerical simulation of mechanical joining technologies
such as clinching, the material modeling of the joining parts is of major importance.
This includes modeling the damage and failure behavior of the materials in accordance
with varying occurring stress states. This paper presents a calibration method
of three different fracture models. The calibration of the models is done by use
of experimental data from a modified punch test, tensile test and bulge test in
order to map the occurring stress states from clinching processes and to precisely
model the resulting failure behavior. Experimental investigations were carried
out for an aluminum alloy EN AW-6014 in temper T4 and compared with the simulative
results generated in LS-DYNA. The comparison of force-displacement curves and
failure initiation shows that the Hosford–Coulomb model predicts the failure behavior
for the material used and the tests applied with the best accuracy.
author:
- first_name: Max
full_name: Böhnke, Max
id: '45779'
last_name: Böhnke
- first_name: Christian Roman
full_name: Bielak, Christian Roman
id: '34782'
last_name: Bielak
- first_name: Johannes
full_name: Friedlein, Johannes
last_name: Friedlein
- first_name: Mathias
full_name: Bobbert, Mathias
id: '7850'
last_name: Bobbert
- first_name: Julia
full_name: Mergheim, Julia
last_name: Mergheim
- first_name: Paul
full_name: Steinmann, Paul
last_name: Steinmann
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Böhnke M, Bielak CR, Friedlein J, et al. A calibration method for failure
modeling in clinching process simulations. In: Materials Research Proceedings.
Materials Research Forum LLC; 2023. doi:10.21741/9781644902417-34'
apa: Böhnke, M., Bielak, C. R., Friedlein, J., Bobbert, M., Mergheim, J., Steinmann,
P., & Meschut, G. (2023). A calibration method for failure modeling in clinching
process simulations. Materials Research Proceedings. https://doi.org/10.21741/9781644902417-34
bibtex: '@inproceedings{Böhnke_Bielak_Friedlein_Bobbert_Mergheim_Steinmann_Meschut_2023,
title={A calibration method for failure modeling in clinching process simulations},
DOI={10.21741/9781644902417-34},
booktitle={Materials Research Proceedings}, publisher={Materials Research Forum
LLC}, author={Böhnke, Max and Bielak, Christian Roman and Friedlein, Johannes
and Bobbert, Mathias and Mergheim, Julia and Steinmann, Paul and Meschut, Gerson},
year={2023} }'
chicago: Böhnke, Max, Christian Roman Bielak, Johannes Friedlein, Mathias Bobbert,
Julia Mergheim, Paul Steinmann, and Gerson Meschut. “A Calibration Method for
Failure Modeling in Clinching Process Simulations.” In Materials Research Proceedings.
Materials Research Forum LLC, 2023. https://doi.org/10.21741/9781644902417-34.
ieee: 'M. Böhnke et al., “A calibration method for failure modeling in clinching
process simulations,” 2023, doi: 10.21741/9781644902417-34.'
mla: Böhnke, Max, et al. “A Calibration Method for Failure Modeling in Clinching
Process Simulations.” Materials Research Proceedings, Materials Research
Forum LLC, 2023, doi:10.21741/9781644902417-34.
short: 'M. Böhnke, C.R. Bielak, J. Friedlein, M. Bobbert, J. Mergheim, P. Steinmann,
G. Meschut, in: Materials Research Proceedings, Materials Research Forum LLC,
2023.'
date_created: 2023-04-13T07:42:53Z
date_updated: 2024-03-11T08:14:53Z
department:
- _id: '157'
doi: 10.21741/9781644902417-34
language:
- iso: eng
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '131'
name: 'TRR 285 - A: TRR 285 - Project Area A'
- _id: '135'
name: 'TRR 285 – A01: TRR 285 - Subproject A01'
- _id: '139'
name: 'TRR 285 – A05: TRR 285 - Subproject A05'
publication: Materials Research Proceedings
publication_identifier:
issn:
- 2474-395X
publication_status: published
publisher: Materials Research Forum LLC
quality_controlled: '1'
status: public
title: A calibration method for failure modeling in clinching process simulations
type: conference
user_id: '45779'
year: '2023'
...
---
_id: '52454'
author:
- first_name: Max
full_name: Böhnke, Max
id: '45779'
last_name: Böhnke
- first_name: Christian Roman
full_name: Bielak, Christian Roman
id: '34782'
last_name: Bielak
- first_name: Mathias
full_name: Bobbert, Mathias
id: '7850'
last_name: Bobbert
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Böhnke M, Bielak CR, Bobbert M, Meschut G. Experimental and Numerical Investigation
of Clinched Joints Under Shear Tensile Loading at High Strain Rates. In: Lecture
Notes in Mechanical Engineering. Springer Nature Switzerland; 2023. doi:10.1007/978-3-031-41341-4_12'
apa: Böhnke, M., Bielak, C. R., Bobbert, M., & Meschut, G. (2023). Experimental
and Numerical Investigation of Clinched Joints Under Shear Tensile Loading at
High Strain Rates. In Lecture Notes in Mechanical Engineering. 14th International
Conference on the Technology of Plasticity. Springer Nature Switzerland. https://doi.org/10.1007/978-3-031-41341-4_12
bibtex: '@inbook{Böhnke_Bielak_Bobbert_Meschut_2023, place={Cham}, title={Experimental
and Numerical Investigation of Clinched Joints Under Shear Tensile Loading at
High Strain Rates}, DOI={10.1007/978-3-031-41341-4_12},
booktitle={Lecture Notes in Mechanical Engineering}, publisher={Springer Nature
Switzerland}, author={Böhnke, Max and Bielak, Christian Roman and Bobbert, Mathias
and Meschut, Gerson}, year={2023} }'
chicago: 'Böhnke, Max, Christian Roman Bielak, Mathias Bobbert, and Gerson Meschut.
“Experimental and Numerical Investigation of Clinched Joints Under Shear Tensile
Loading at High Strain Rates.” In Lecture Notes in Mechanical Engineering.
Cham: Springer Nature Switzerland, 2023. https://doi.org/10.1007/978-3-031-41341-4_12.'
ieee: 'M. Böhnke, C. R. Bielak, M. Bobbert, and G. Meschut, “Experimental and Numerical
Investigation of Clinched Joints Under Shear Tensile Loading at High Strain Rates,”
in Lecture Notes in Mechanical Engineering, Cham: Springer Nature Switzerland,
2023.'
mla: Böhnke, Max, et al. “Experimental and Numerical Investigation of Clinched Joints
Under Shear Tensile Loading at High Strain Rates.” Lecture Notes in Mechanical
Engineering, Springer Nature Switzerland, 2023, doi:10.1007/978-3-031-41341-4_12.
short: 'M. Böhnke, C.R. Bielak, M. Bobbert, G. Meschut, in: Lecture Notes in Mechanical
Engineering, Springer Nature Switzerland, Cham, 2023.'
conference:
name: 14th International Conference on the Technology of Plasticity
date_created: 2024-03-11T08:00:47Z
date_updated: 2024-03-11T08:13:40Z
department:
- _id: '157'
doi: 10.1007/978-3-031-41341-4_12
language:
- iso: eng
place: Cham
project:
- _id: '135'
name: 'TRR 285 – A01: TRR 285 - Subproject A01'
publication: Lecture Notes in Mechanical Engineering
publication_identifier:
isbn:
- '9783031413407'
- '9783031413414'
issn:
- 2195-4356
- 2195-4364
publication_status: published
publisher: Springer Nature Switzerland
quality_controlled: '1'
status: public
title: Experimental and Numerical Investigation of Clinched Joints Under Shear Tensile
Loading at High Strain Rates
type: book_chapter
user_id: '45779'
year: '2023'
...
---
_id: '43463'
author:
- first_name: Johannes
full_name: Friedlein, Johannes
last_name: Friedlein
- first_name: Christian Roman
full_name: Bielak, Christian Roman
id: '34782'
last_name: Bielak
- first_name: Max
full_name: Böhnke, Max
id: '45779'
last_name: Böhnke
- first_name: Mathias
full_name: Bobbert, Mathias
id: '7850'
last_name: Bobbert
- first_name: Julia
full_name: Mergheim, Julia
last_name: Mergheim
- first_name: Paul
full_name: Steinmann, Paul
last_name: Steinmann
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Friedlein J, Bielak CR, Böhnke M, et al. Influence of plastic orthotropy on
clinching of sheet metal. In: Materials Research Proceedings. Materials
Research Forum LLC; 2023. doi:10.21741/9781644902417-17 '
apa: Friedlein, J., Bielak, C. R., Böhnke, M., Bobbert, M., Mergheim, J., Steinmann,
P., & Meschut, G. (2023). Influence of plastic orthotropy on clinching of
sheet metal. Materials Research Proceedings. https://doi.org/10.21741/9781644902417-17
bibtex: '@inproceedings{Friedlein_Bielak_Böhnke_Bobbert_Mergheim_Steinmann_Meschut_2023,
title={Influence of plastic orthotropy on clinching of sheet metal}, DOI={10.21741/9781644902417-17 }, booktitle={Materials Research Proceedings},
publisher={Materials Research Forum LLC}, author={Friedlein, Johannes and Bielak,
Christian Roman and Böhnke, Max and Bobbert, Mathias and Mergheim, Julia and Steinmann,
Paul and Meschut, Gerson}, year={2023} }'
chicago: Friedlein, Johannes, Christian Roman Bielak, Max Böhnke, Mathias Bobbert,
Julia Mergheim, Paul Steinmann, and Gerson Meschut. “Influence of Plastic Orthotropy
on Clinching of Sheet Metal.” In Materials Research Proceedings. Materials
Research Forum LLC, 2023. https://doi.org/10.21741/9781644902417-17
.
ieee: 'J. Friedlein et al., “Influence of plastic orthotropy on clinching
of sheet metal,” 2023, doi: 10.21741/9781644902417-17 .'
mla: Friedlein, Johannes, et al. “Influence of Plastic Orthotropy on Clinching of
Sheet Metal.” Materials Research Proceedings, Materials Research Forum
LLC, 2023, doi:10.21741/9781644902417-17
.
short: 'J. Friedlein, C.R. Bielak, M. Böhnke, M. Bobbert, J. Mergheim, P. Steinmann,
G. Meschut, in: Materials Research Proceedings, Materials Research Forum LLC,
2023.'
date_created: 2023-04-13T07:50:05Z
date_updated: 2024-03-11T08:13:57Z
department:
- _id: '157'
doi: '10.21741/9781644902417-17 '
language:
- iso: eng
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '131'
name: 'TRR 285 - A: TRR 285 - Project Area A'
- _id: '139'
name: 'TRR 285 – A05: TRR 285 - Subproject A05'
- _id: '135'
name: 'TRR 285 – A01: TRR 285 - Subproject A01'
publication: Materials Research Proceedings
publication_status: published
publisher: Materials Research Forum LLC
quality_controlled: '1'
status: public
title: Influence of plastic orthotropy on clinching of sheet metal
type: conference
user_id: '45779'
year: '2023'
...
---
_id: '52466'
alternative_title:
- 'Blogbeitrag: Zentrum für Komparative Theologie und Kulturwissenschaften'
author:
- first_name: Anne
full_name: Breckner, Anne
id: '24573'
last_name: Breckner
citation:
ama: Breckner A. Karneval und OWL.; 2023.
apa: Breckner, A. (2023). Karneval und OWL.
bibtex: '@book{Breckner_2023, place={Paderborn}, series={Blokk}, title={Karneval
und OWL}, author={Breckner, Anne}, year={2023}, collection={Blokk} }'
chicago: Breckner, Anne. Karneval und OWL. Blokk. Paderborn, 2023.
ieee: A. Breckner, Karneval und OWL. Paderborn, 2023.
mla: Breckner, Anne. Karneval und OWL. 2023.
short: A. Breckner, Karneval und OWL, Paderborn, 2023.
date_created: 2024-03-11T11:35:30Z
date_updated: 2024-03-11T12:08:24Z
language:
- iso: ger
main_file_link:
- open_access: '1'
url: https://blogs.uni-paderborn.de/zekkblog/2023/02/
oa: '1'
place: Paderborn
publication_status: published
series_title: Blokk
status: public
title: Karneval und OWL
type: misc
user_id: '24573'
year: '2023'
...
---
_id: '52464'
alternative_title:
- 'Blogbeitrag: Zentrum für Komparative Theologie und Kulturwissenschaten'
author:
- first_name: Anne
full_name: Breckner, Anne
id: '24573'
last_name: Breckner
citation:
ama: Breckner A. Auszeit.; 2023.
apa: Breckner, A. (2023). Auszeit.
bibtex: '@book{Breckner_2023, place={Paderborn}, series={Blokk}, title={Auszeit},
author={Breckner, Anne}, year={2023}, collection={Blokk} }'
chicago: Breckner, Anne. Auszeit. Blokk. Paderborn, 2023.
ieee: A. Breckner, Auszeit. Paderborn, 2023.
mla: Breckner, Anne. Auszeit. 2023.
short: A. Breckner, Auszeit, Paderborn, 2023.
date_created: 2024-03-11T11:30:07Z
date_updated: 2024-03-11T12:09:01Z
language:
- iso: ger
main_file_link:
- open_access: '1'
url: https://blogs.uni-paderborn.de/zekkblog/2023/08/11/auszeit/
oa: '1'
place: Paderborn
publication_status: published
series_title: Blokk
status: public
title: Auszeit
type: misc
user_id: '24573'
year: '2023'
...
---
_id: '52457'
author:
- first_name: Anne
full_name: Breckner, Anne
id: '24573'
last_name: Breckner
- first_name: Naciye
full_name: Kamcili-Yildiz, Naciye
last_name: Kamcili-Yildiz
citation:
ama: Breckner A, Kamcili-Yildiz N. Was brauchst du? Engagement für die Mitmenschen
in Christentum und Islam. Interreligiöse Unterrichtsreihe im Themenheft Diakonie.
Religion 5-10. 2023;52(4).
apa: Breckner, A., & Kamcili-Yildiz, N. (2023). Was brauchst du? Engagement
für die Mitmenschen in Christentum und Islam. Interreligiöse Unterrichtsreihe
im Themenheft Diakonie. Religion 5-10, 52(4).
bibtex: '@article{Breckner_Kamcili-Yildiz_2023, title={Was brauchst du? Engagement
für die Mitmenschen in Christentum und Islam. Interreligiöse Unterrichtsreihe
im Themenheft Diakonie}, volume={52}, number={4}, journal={Religion 5-10}, publisher={Friedrich},
author={Breckner, Anne and Kamcili-Yildiz, Naciye}, year={2023} }'
chicago: Breckner, Anne, and Naciye Kamcili-Yildiz. “Was brauchst du? Engagement
für die Mitmenschen in Christentum und Islam. Interreligiöse Unterrichtsreihe
im Themenheft Diakonie.” Religion 5-10 52, no. 4 (2023).
ieee: A. Breckner and N. Kamcili-Yildiz, “Was brauchst du? Engagement für die Mitmenschen
in Christentum und Islam. Interreligiöse Unterrichtsreihe im Themenheft Diakonie,”
Religion 5-10, vol. 52, no. 4, 2023.
mla: Breckner, Anne, and Naciye Kamcili-Yildiz. “Was brauchst du? Engagement für
die Mitmenschen in Christentum und Islam. Interreligiöse Unterrichtsreihe im Themenheft
Diakonie.” Religion 5-10, vol. 52, no. 4, Friedrich, 2023.
short: A. Breckner, N. Kamcili-Yildiz, Religion 5-10 52 (2023).
date_created: 2024-03-11T11:11:33Z
date_updated: 2024-03-11T13:16:38Z
intvolume: ' 52'
issue: '4'
language:
- iso: ger
publication: Religion 5-10
publication_status: published
publisher: Friedrich
status: public
title: Was brauchst du? Engagement für die Mitmenschen in Christentum und Islam. Interreligiöse
Unterrichtsreihe im Themenheft Diakonie
type: journal_article
user_id: '24573'
volume: 52
year: '2023'
...
---
_id: '47540'
author:
- first_name: Lukas
full_name: Knorr, Lukas
id: '90391'
last_name: Knorr
- first_name: Florian
full_name: Schlosser, Florian
id: '88614'
last_name: Schlosser
- first_name: Henning
full_name: Meschede, Henning
id: '86954'
last_name: Meschede
orcid: 0000-0002-1538-089X
citation:
ama: Knorr L, Schlosser F, Meschede H. Economic Integration of a High-Temperature
Heat Pump with Flexible Part-Load Operation.; 2023.
apa: Knorr, L., Schlosser, F., & Meschede, H. (2023). Economic Integration
of a High-Temperature Heat Pump with Flexible Part-load Operation.
bibtex: '@book{Knorr_Schlosser_Meschede_2023, place={Dubrovnik}, title={Economic
Integration of a High-Temperature Heat Pump with Flexible Part-load Operation},
author={Knorr, Lukas and Schlosser, Florian and Meschede, Henning}, year={2023}
}'
chicago: Knorr, Lukas, Florian Schlosser, and Henning Meschede. Economic Integration
of a High-Temperature Heat Pump with Flexible Part-Load Operation. Dubrovnik,
2023.
ieee: L. Knorr, F. Schlosser, and H. Meschede, Economic Integration of a High-Temperature
Heat Pump with Flexible Part-load Operation. Dubrovnik, 2023.
mla: Knorr, Lukas, et al. Economic Integration of a High-Temperature Heat Pump
with Flexible Part-Load Operation. 2023.
short: L. Knorr, F. Schlosser, H. Meschede, Economic Integration of a High-Temperature
Heat Pump with Flexible Part-Load Operation, Dubrovnik, 2023.
date_created: 2023-10-02T09:04:24Z
date_updated: 2024-03-11T14:19:03Z
department:
- _id: '644'
language:
- iso: eng
place: Dubrovnik
status: public
title: Economic Integration of a High-Temperature Heat Pump with Flexible Part-load
Operation
type: misc
user_id: '90391'
year: '2023'
...
---
_id: '49555'
author:
- first_name: Johann
full_name: Rauhaus, Johann
id: '63776'
last_name: Rauhaus
- first_name: Magnus
full_name: Schadomsky, Magnus
id: '11904'
last_name: Schadomsky
- first_name: Balázs
full_name: Magyar, Balázs
id: '97759'
last_name: Magyar
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: 'Rauhaus J, Schadomsky M, Magyar B, Zimmer D. Untersuchung des Reibungs- und
Deformationsverhaltens von schnelllaufenden Bremsen. In: Gesellschaft für Tribologie
e.V, ed. Tagungsband der 64. Tribologie-Fachtagung. ; 2023.'
apa: Rauhaus, J., Schadomsky, M., Magyar, B., & Zimmer, D. (2023). Untersuchung
des Reibungs- und Deformationsverhaltens von schnelllaufenden Bremsen. In Gesellschaft
für Tribologie e.V (Ed.), Tagungsband der 64. Tribologie-Fachtagung.
bibtex: '@inproceedings{Rauhaus_Schadomsky_Magyar_Zimmer_2023, title={Untersuchung
des Reibungs- und Deformationsverhaltens von schnelllaufenden Bremsen}, booktitle={Tagungsband
der 64. Tribologie-Fachtagung}, author={Rauhaus, Johann and Schadomsky, Magnus
and Magyar, Balázs and Zimmer, Detmar}, editor={Gesellschaft für Tribologie e.V},
year={2023} }'
chicago: Rauhaus, Johann, Magnus Schadomsky, Balázs Magyar, and Detmar Zimmer. “Untersuchung
des Reibungs- und Deformationsverhaltens von schnelllaufenden Bremsen.” In Tagungsband
der 64. Tribologie-Fachtagung, edited by Gesellschaft für Tribologie e.V,
2023.
ieee: J. Rauhaus, M. Schadomsky, B. Magyar, and D. Zimmer, “Untersuchung des Reibungs-
und Deformationsverhaltens von schnelllaufenden Bremsen,” in Tagungsband der
64. Tribologie-Fachtagung, Göttingen, 2023.
mla: Rauhaus, Johann, et al. “Untersuchung des Reibungs- und Deformationsverhaltens
von schnelllaufenden Bremsen.” Tagungsband der 64. Tribologie-Fachtagung,
edited by Gesellschaft für Tribologie e.V, 2023.
short: 'J. Rauhaus, M. Schadomsky, B. Magyar, D. Zimmer, in: Gesellschaft für Tribologie
e.V (Ed.), Tagungsband der 64. Tribologie-Fachtagung, 2023.'
conference:
end_date: 2023-09-27
location: Göttingen
name: 64. Tribologie-Fachtagung 2023
start_date: 2023-09-25
corporate_editor:
- Gesellschaft für Tribologie e.V
date_created: 2023-12-08T13:59:01Z
date_updated: 2024-03-11T19:14:33Z
department:
- _id: '146'
language:
- iso: ger
publication: Tagungsband der 64. Tribologie-Fachtagung
publication_identifier:
isbn:
- 978-3-9817451-8-4
publication_status: published
status: public
title: Untersuchung des Reibungs- und Deformationsverhaltens von schnelllaufenden
Bremsen
type: conference
user_id: '63776'
year: '2023'
...