@inproceedings{44444, author = {{Althaus, Maike and Müller, Michelle and Vorbohle, Christian and Kundisch, Dennis}}, booktitle = {{Proceedings of the International Conference on Challenges in Managing Smart Products and Services (CHIMSPAS 2023)}}, location = {{Bielefeld}}, title = {{{Business Models for Cultural Event Platforms – A Taxonomy Approach}}}, year = {{2023}}, } @inproceedings{44053, author = {{Laux, Florian and Poniatowski, Martin and Kundisch, Dennis}}, booktitle = {{Proceedings of the 31st European Conference on Information Systems (ECIS)}}, location = {{Kristiansand, Norway}}, title = {{{May I have your Attention, please? – The Interaction between Attention Screening and Reputation on Crowdworking Platforms}}}, year = {{2023}}, } @inproceedings{44103, author = {{Neukötter, Moritz and Jesinghausen, Steffen and Schmid, Hans-Joachim}}, location = {{Berlin}}, title = {{{Particles as Seeds for Instabilities in Uniaxially Elongated Polymer Suspension Filaments (Presentation)}}}, year = {{2023}}, } @article{44477, author = {{Küster, Christine and Klünder, Nina and Wagenknecht, Inga}}, issn = {{2626-0913}}, journal = {{Hauswirtschaft und Wissenschaft}}, pages = {{1--12}}, publisher = {{Deutsche Gesellschaft für Hauswirtschaft e.V.}}, title = {{{Haushaltswissenschaft – Eine Diskussionsgrundlage}}}, doi = {{ 10.23782/HUW_09_2023}}, volume = {{71}}, year = {{2023}}, } @inbook{35063, author = {{Meine, Sabine and Otto, Arnold and Süßmann, Johannes}}, booktitle = {{Musiklandschaften zwischen Rhein und Weser. Pluralisierung und Verflechtung entlang des Hellwegs in der Frühen Neuzeit. Unter Mitarbeit v. Markus Lauert}}, isbn = {{978-3-8260-7218-5}}, pages = {{7–42}}, publisher = {{Königshausen & Neumann}}, title = {{{Musiklandschaften zwischen Rhein und Weser – Einführung}}}, doi = {{https://doi.org/10.36202/9783826077920}}, year = {{2023}}, } @inproceedings{20841, author = {{Gharibian, Sevag and Watson, James and Bausch, Johannes}}, booktitle = {{Proceedings of the 40th International Symposium on Theoretical Aspects of Computer Science (STACS)}}, pages = {{54:1--54:21}}, title = {{{The Complexity of Translationally Invariant Problems beyond Ground State Energies}}}, doi = {{https://doi.org/10.4230/LIPIcs.STACS.2023.54}}, volume = {{254}}, year = {{2023}}, } @unpublished{44501, abstract = {{Extending the notion of maxcut, the study of the frustration index of signed graphs is one of the basic questions in the theory of signed graphs. Recently two of the authors initiated the study of critically frustrated signed graphs. That is a signed graph whose frustration index decreases with the removal of any edge. The main focus of this study is on critical signed graphs which are not edge-disjoint unions of critically frustrated signed graphs (namely non-decomposable signed graphs) and which are not built from other critically frustrated signed graphs by subdivision. We conjecture that for any given k there are only finitely many critically k-frustrated signed graphs of this kind. Providing support for this conjecture we show that there are only two of such critically 3-frustrated signed graphs where there is no pair of edge-disjoint negative cycles. Similarly, we show that there are exactly ten critically 3-frustrated signed planar graphs that are neither decomposable nor subdivisions of other critically frustrated signed graphs. We present a method for building non-decomposable critically frustrated signed graphs based on two given such signed graphs. We also show that the condition of being non-decomposable is necessary for our conjecture. }}, author = {{Cappello, Chiara and Naserasr, Reza and Steffen, Eckhard and Wang, Zhouningxin}}, booktitle = {{arXiv:2304.10243}}, title = {{{Critically 3-frustrated signed graphs}}}, year = {{2023}}, } @article{42517, author = {{Tapio, Kosti and Kielar, Charlotte and Parikka, Johannes M. and Keller, Adrian and Järvinen, Heini and Fahmy, Karim and Toppari, J. Jussi}}, issn = {{0897-4756}}, journal = {{Chemistry of Materials}}, keywords = {{Materials Chemistry, General Chemical Engineering, General Chemistry}}, pages = {{1961–1971}}, publisher = {{American Chemical Society (ACS)}}, title = {{{Large-Scale Formation of DNA Origami Lattices on Silicon}}}, doi = {{10.1021/acs.chemmater.2c03190}}, volume = {{35}}, year = {{2023}}, } @article{42518, author = {{Pothineni, Bhanu Kiran and Keller, Adrian}}, issn = {{2699-9307}}, journal = {{Advanced NanoBiomed Research}}, keywords = {{General Medicine}}, publisher = {{Wiley}}, title = {{{Nanoparticle‐Based Formulations of Glycopeptide Antibiotics: A Means for Overcoming Vancomycin Resistance in Bacterial Pathogens?}}}, doi = {{10.1002/anbr.202200134}}, volume = {{3}}, year = {{2023}}, } @article{44503, author = {{Hanke, Marcel and Tomm, Emilia and Grundmeier, Guido and Keller, Adrian}}, issn = {{1439-4227}}, journal = {{ChemBioChem}}, keywords = {{Organic Chemistry, Molecular Biology, Molecular Medicine, Biochemistry}}, publisher = {{Wiley}}, title = {{{Effect of Ionic Strength on the Thermal Stability of DNA Origami Nanostructures}}}, doi = {{10.1002/cbic.202300338}}, year = {{2023}}, } @article{44504, author = {{Linko, Veikko and Keller, Adrian}}, issn = {{1613-6810}}, journal = {{Small}}, keywords = {{Biomaterials, Biotechnology, General Materials Science, General Chemistry}}, publisher = {{Wiley}}, title = {{{Stability of DNA Origami Nanostructures in Physiological Media: The Role of Molecular Interactions}}}, doi = {{10.1002/smll.202301935}}, year = {{2023}}, } @phdthesis{44509, author = {{Kruse, Anne}}, isbn = {{978-3-8440-8955-4}}, pages = {{145}}, title = {{{Entwicklung einer Methode zur Integration der Additiven Fertigung in die Serienproduktion am Beispiel des Lasersinterns}}}, volume = {{27}}, year = {{2023}}, } @unpublished{44512, abstract = {{For open world applications, deep neural networks (DNNs) need to be aware of previously unseen data and adaptable to evolving environments. Furthermore, it is desirable to detect and learn novel classes which are not included in the DNNs underlying set of semantic classes in an unsupervised fashion. The method proposed in this article builds upon anomaly detection to retrieve out-of-distribution (OoD) data as candidates for new classes. We thereafter extend the DNN by $k$ empty classes and fine-tune it on the OoD data samples. To this end, we introduce two loss functions, which 1) entice the DNN to assign OoD samples to the empty classes and 2) to minimize the inner-class feature distances between them. Thus, instead of ground truth which contains labels for the different novel classes, the DNN obtains a single OoD label together with a distance matrix, which is computed in advance. We perform several experiments for image classification and semantic segmentation, which demonstrate that a DNN can extend its own semantic space by multiple classes without having access to ground truth.}}, author = {{Uhlemeyer, Svenja and Lienen, Julian and Hüllermeier, Eyke and Gottschalk, Hanno}}, booktitle = {{arXiv:2305.00983}}, title = {{{Detecting Novelties with Empty Classes}}}, year = {{2023}}, } @inproceedings{44521, author = {{Wurst, Johanna and Steinhoff, Timon and Mozgova, Iryna and Hassel, Thomas and Lachmayer, Roland}}, title = {{{Aspects of a Sustainability Focused Comparison of the Wire Arc Additive Manufacturing (WAAM) and the Laser Powder Bed Fusion (LPBF) Process}}}, doi = {{10.1007/978-981-19-9205-6_9}}, year = {{2023}}, } @inproceedings{44522, author = {{Wurst, Johanna and Rosemann, Daniel and Mozgova, Iryna and Lachmayer, Roland}}, title = {{{Concept and Implementation of a Student Design Project for the Development of Sustainable Products}}}, doi = {{10.1007/978-3-031-28839-5_88}}, year = {{2023}}, } @article{44523, author = {{Paradies, Jan}}, issn = {{0001-4842}}, journal = {{Accounts of Chemical Research}}, keywords = {{General Medicine, General Chemistry}}, number = {{7}}, pages = {{821--834}}, publisher = {{American Chemical Society (ACS)}}, title = {{{Structure–Reactivity Relationships in Borane-Based FLP-Catalyzed Hydrogenations, Dehydrogenations, and Cycloisomerizations}}}, doi = {{10.1021/acs.accounts.2c00832}}, volume = {{56}}, year = {{2023}}, } @book{44524, editor = {{Meier-Gräwe, Uta and Praetorius, Ina and Tecklenburg, Feline}}, isbn = {{9783847425922}}, pages = {{307}}, publisher = {{Verlag Barbara Budrich}}, title = {{{Wirtschaft neu ausrichten. Care-Initiativen in Deutschland, Österreich und der Schweiz.}}}, year = {{2023}}, } @article{44545, abstract = {{IntroductionExergames are increasingly used in rehabilitation settings for older adults to train physical and cognitive abilities. To meet the potential that exergames hold, they need to be adapted to the individual abilities of the player and their training objectives. Therefore, it is important to know whether and how game characteristics affect their playing. The aim of this study is to investigate the effect of two different kinds of exergame (step game and balance game) played at two difficulty levels on brain activity and physical activity.MethodsTwenty-eight older independently living adults played two different exergames at two difficulty levels each. In addition, the same movements as during gaming (leaning sideways with feet in place and stepping sideways) were performed as reference movements. Brain activity was recorded using a 64-channel EEG system to assess brain activity, while physical activity was recorded using an accelerometer at the lower back and a heart rate sensor. Source-space analysis was applied to analyze the power spectral density in theta (4 Hz–7 Hz) and alpha-2 (10 Hz–12 Hz) frequency bands. Vector magnitude was applied to the acceleration data.ResultsFriedman ANOVA revealed significantly higher theta power for the exergaming conditions compared to the reference movement for both games. Alpha-2 power showed a more diverse pattern which might be attributed to task-specific conditions. Acceleration decreased significantly from the reference movement to the easy condition to the hard condition for both games.DiscussionThe results indicate that exergaming increases frontal theta activity irrespective of type of game or difficulty level, while physical activity decreases with increasing difficulty level. Heart rate was found to be an inappropriate measure in this population older adults. These findings contribute to understanding of how game characteristics affect physical and cognitive activity and consequently need to be taken into account when choosing appropriate games and game settings for exergame interventions.}}, author = {{Müller, Helen and Baumeister, Jochen and Bardal, Ellen Marie and Vereijken, Beatrix and Skjæret-Maroni, Nina}}, issn = {{1663-4365}}, journal = {{Frontiers in Aging Neuroscience}}, keywords = {{Cognitive Neuroscience, Aging}}, publisher = {{Frontiers Media SA}}, title = {{{Exergaming in older adults: the effects of game characteristics on brain activity and physical activity}}}, doi = {{10.3389/fnagi.2023.1143859}}, volume = {{15}}, year = {{2023}}, } @inbook{43170, author = {{Labusch, Amelie and Eickelmann, Birgit}}, booktitle = {{Teaching coding in K-12 schools: Research and application}}, editor = {{Keane, T. and Fluck, A. E.}}, isbn = {{9783031219696}}, pages = {{319--329}}, publisher = {{Springer International Publishing}}, title = {{{Learning Computational Thinking in Secondary School (Year 8) in Germany in International Comparison: Results from ICILS 2018}}}, doi = {{10.1007/978-3-031-21970-2_21}}, year = {{2023}}, } @inbook{44626, author = {{Schulze, Johanna and Drossel, Kerstin and Eickelmann, Birgit}}, booktitle = {{Professionalisierung für digitale Bildung im Grundschulalter - Ergebnisse des Forschungsprojekts P3DiG }}, editor = {{Irion, T. and Böttinger, T. and Kammerl, R.}}, pages = {{15--30}}, publisher = {{Waxmann Verlag}}, title = {{{Die inhaltliche Ausgestaltung schulischer Medienkonzepte als Gelingensbedingung digitalisierungsbezogener Schulentwicklungsprozesse}}}, doi = {{DOI:10.31244/9783830996415}}, year = {{2023}}, } @techreport{44627, author = {{Gerick, J. and Eickelmann, Birgit and Panten, B. and Rothärmel, A. and Rau, M. and Gottschalk, T.}}, publisher = {{Technische Universität Braunschweig/Universität Paderborn}}, title = {{{Abschlussbericht zum Forschungsprojekt ‚Gelingensbedingungen und Transfer von erfolgreichen Digitalisierungsprozessen an Schulen in Nordrhein-Westfalen (GuTe DigiSchulen NRW)}}}, year = {{2023}}, } @techreport{44628, author = {{Gerick, J. and Eickelmann, Birgit and Rau, M. and Panten, B. and Rothärmel, A. and Gottschalk, T.}}, publisher = {{Technische Universität Braunschweig}}, title = {{{Digitalisierungsbezogene Schulentwicklungsprozesse erfolgreich gestalten. Handreichung für die schulische Arbeit zu den Ergebnissen des Forschungsprojekts GuTe DigiSchulen NRW.}}}, year = {{2023}}, } @article{35536, author = {{Kowatz, Jannik and Teutenberg, Dominik and Meschut, Gerson}}, issn = {{0143-7496}}, journal = {{International Journal of Adhesion and Adhesives}}, publisher = {{Elsevier}}, title = {{{Optimization of inductive fast-curing of epoxy adhesive by model-based kinetics}}}, doi = {{https://doi.org/10.1016/j.ijadhadh.2023.103392}}, volume = {{124}}, year = {{2023}}, } @inproceedings{44228, author = {{Salten, Alexander Heinrich Johannes and Al Trjman, Mohamad and Meschut, Gerson and Kenig, Eugeny Y.}}, location = {{Paderborn}}, title = {{{Simulation des „viscous fingering“ Effektes in Klebverbindungen}}}, year = {{2023}}, } @inproceedings{44227, author = {{Al Trjman, Mohamad and Meschut, Gerson and Salten, Alexander Heinrich Johannes and Kenig, Eugeny Y.}}, location = {{Frankfurt am Main}}, title = {{{Methodenentwicklung zur Simulation des Viscous Fingering in Klebverbindungen von stahlintensiven Mischbaustrukturen}}}, year = {{2023}}, } @article{44672, abstract = {{With enhancing digitalization, condition monitoring is used in an increasing number of application fields across various industrial sectors. By its application, increased reliability as well as reduced risks and costs can be achieved. Based on different approaches, technical systems are monitored and measured data is analyzed to enable condition-based or predictive maintenance. To this end, machine learning approaches are usually implemented to diagnose the health states or predict the health index of the monitored system. However, these trained models are often black-box models, not intuitively explainable for a human. To overcome this shortcoming, a model-based approach based on physics is developed for piezoelectric bending actuators. Such a model enables a transparent representation of the system. Moreover, the model-based approach is extended by a parameter-estimation to account for sudden changes in behavior e. g. caused by occurring cracks.}}, author = {{Bender, Amelie}}, issn = {{0924-4247}}, journal = {{Sensors and Actuators A: Physical}}, keywords = {{Condition Monitoring, Model-based approach Diagnostics, Varying conditions, Explainability, Piezoelectric bending actuators}}, publisher = {{Elsevier BV}}, title = {{{Model-based condition monitoring of piezoelectric bending actuators}}}, doi = {{10.1016/j.sna.2023.114399}}, volume = {{357}}, year = {{2023}}, } @article{44687, abstract = {{Entwicklungsprojekte stehen in einem Spannungsfeld von Volatilität, Unsicherheit, Komplexität und Ambiguität (VUCA). Resilient Requirements Engineering (RRE) ist ein vielversprechender Ansatz, diesen Rahmenbedingungen gerecht zu werden und erfolgreich zu entwickeln. Es werden Methoden aus den drei Innovationsfeldern des RRE – Vorausschau, Effizienz und Nachhaltigkeit – angewendet, um Effizienzpotenziale in der Produktentwicklung zu nutzen und frühzeitig Nachhaltigkeitsdimensionen in der Ermittlung von Stakeholderbedürfnissen zu verankern.}}, author = {{Gräßler, Iris and Oleff, Christian and Preuß, Daniel and Koch, Anna-Sophie}}, issn = {{2511-0896}}, journal = {{Zeitschrift für wirtschaftlichen Fabrikbetrieb}}, keywords = {{Management Science and Operations Research, Strategy and Management, General Engineering}}, number = {{4}}, pages = {{222--225}}, publisher = {{Walter de Gruyter GmbH}}, title = {{{Resilient Requirements Engineering}}}, doi = {{10.1515/zwf-2023-1030}}, volume = {{118}}, year = {{2023}}, } @inproceedings{44194, author = {{Ahmed, Qazi Arbab and Awais, Muhammad and Platzner, Marco}}, booktitle = {{The 24th International Symposium on Quality Electronic Design (ISQED'23), San Francisco, Califorina USA}}, location = {{San Fransico CA 94023-0607, USA}}, title = {{{MAAS: Hiding Trojans in Approximate Circuits}}}, year = {{2023}}, } @misc{44735, author = {{Schweichhart, Jonas}}, title = {{{Minimum Edge Cuts in Overlay Networks}}}, year = {{2023}}, } @inbook{44769, author = {{Castenow, Jannik and Harbig, Jonas and Meyer auf der Heide, Friedhelm}}, booktitle = {{Lecture Notes in Computer Science}}, isbn = {{9783031304477}}, issn = {{0302-9743}}, publisher = {{Springer International Publishing}}, title = {{{Unifying Gathering Protocols for Swarms of Mobile Robots}}}, doi = {{10.1007/978-3-031-30448-4_1}}, year = {{2023}}, } @misc{44101, author = {{Temborius, Fiona and Neukötter, Moritz}}, title = {{{Polymere unter Dehnung: Untersuchung der Filamententstehung von Polymerblends und deren Instabilitätsentstehung durch Partikeln}}}, year = {{2023}}, } @misc{42997, author = {{Almohammad, Ahmad and Neukötter, Moritz}}, title = {{{Untersuchung dehnrheologischer Eigenschaften - Suspensionen auf Basis von Polymerlösungen }}}, year = {{2023}}, } @article{44044, abstract = {{Dispersion is present in every optical setup and is often an undesired effect, especially in nonlinear-optical experiments where ultrashort laser pulses are needed. Typically, bulky pulse compressors consisting of gratings or prisms are used to address this issue by precompensating the dispersion of the optical components. However, these devices are only able to compensate for a part of the dispersion (second-order dispersion). Here, we present a compact pulse-shaping device that uses plasmonic metasurfaces to apply an arbitrarily designed spectral phase delay allowing for a full dispersion control. Furthermore, with specific phase encodings, this device can be used to temporally reshape the incident laser pulses into more complex pulse forms such as a double pulse. We verify the performance of our device by using an SHG-FROG measurement setup together with a retrieval algorithm to extract the dispersion that our device applies to an incident laser pulse.}}, author = {{Geromel, René and Georgi, Philip and Protte, Maximilian and Lei, Shiwei and Bartley, Tim and Huang, Lingling and Zentgraf, Thomas}}, issn = {{1530-6984}}, journal = {{Nano Letters}}, keywords = {{Mechanical Engineering, Condensed Matter Physics, General Materials Science, General Chemistry, Bioengineering}}, number = {{8}}, pages = {{3196 -- 3201}}, publisher = {{American Chemical Society (ACS)}}, title = {{{Compact Metasurface-Based Optical Pulse-Shaping Device}}}, doi = {{10.1021/acs.nanolett.2c04980}}, volume = {{23}}, year = {{2023}}, } @article{44837, abstract = {{Hydrothermal carbonization (HTC) is an efficient thermochemical method for the conversion of organic feedstock to carbonaceous solids. HTC of different saccharides is known to produce microspheres (MS) with mostly Gaussian size distribution, which are utilized as functional materials in various applications, both as pristine MS and as a precursor for hard carbon MS. Although the average size of the MS can be influenced by adjusting the process parameters, there is no reliable mechanism to affect their size distribution. Our results demonstrate that HTC of trehalose, in contrast to other saccharides, results in a distinctly bimodal sphere diameter distribution consisting of small spheres with diameters of (2.1 ± 0.2) μm and of large spheres with diameters of (10.4 ± 2.6) μm. Remarkably, after pyrolytic post-carbonization at 1000 °C the MS develop a multimodal pore size distribution with abundant macropores > 100 nm, mesopores > 10 nm and micropores < 2 nm, which were examined by small-angle X-ray scattering and visualized by charge-compensated helium ion microscopy. The bimodal size distribution and hierarchical porosity provide an extraordinary set of properties and potential variables for the tailored synthesis of hierarchical porous carbons, making trehalose-derived hard carbon MS a highly promising material for applications in catalysis, filtration, and energy storage devices.}}, author = {{Wortmann, Martin and Keil, Waldemar and Diestelhorst, Elise and Westphal, Michael and Haverkamp, René and Brockhagen, Bennet and Biedinger, Jan and Bondzio, Laila and Weinberger, Christian and Baier, Dominik and Tiemann, Michael and Hütten, Andreas and Hellweg, Thomas and Reiss, Günter and Schmidt, Claudia and Sattler, Klaus and Frese, Natalie}}, issn = {{2046-2069}}, journal = {{RSC Advances}}, keywords = {{General Chemical Engineering, General Chemistry}}, number = {{21}}, pages = {{14181--14189}}, publisher = {{Royal Society of Chemistry (RSC)}}, title = {{{Hard carbon microspheres with bimodal size distribution and hierarchical porosity via hydrothermal carbonization of trehalose}}}, doi = {{10.1039/d3ra01301d}}, volume = {{13}}, year = {{2023}}, } @misc{42999, author = {{Bünder, Dirk and Neukötter, Moritz}}, title = {{{Theoretische Beschreibung des Polymerverhaltens in Polymerlösungen und - schmelzen: Simulationen anhand des Rolie-Poly-Modells}}}, year = {{2023}}, } @misc{42995, author = {{Al Mamoun, Mohamed and Neukötter, Moritz}}, title = {{{Evaluation of self-built low-budget particle sensors (Study Project)}}}, year = {{2023}}, } @book{44246, author = {{Teichert, Jeannine}}, publisher = {{Springer VS}}, title = {{{Digital occupants – Wie digitale Medien die kommunikative Aushandlung von Freundschaften verändern}}}, year = {{2023}}, } @article{44247, author = {{Teichert, Jeannine and Meister, Dorothee M.}}, journal = {{MedienPädagogik}}, title = {{{Mediale Identitätsaushandlungen deutscher MigrantInnen im Zuge des Brexit}}}, year = {{2023}}, } @inbook{42183, author = {{Kruse, Iris and Maubach, Bernd and Tönsing, Johanna}}, booktitle = {{Salah Naoura}}, editor = {{Kruse, Iris and Josting, Petra}}, isbn = {{978-3-96848-094-7}}, pages = {{249--262}}, publisher = {{kopaed}}, title = {{{"Lesungen vor Kindern sind für mich Theater" / Salah Naouras Sicht auf Wirkliches und Mögliches in Autor*innenlesungen für Kinder in der Schule}}}, volume = {{12}}, year = {{2023}}, } @inbook{42182, author = {{Kruse, Iris and Schäfer, Luisa Maria}}, booktitle = {{Salah Naoura}}, editor = {{Kruse, Iris and Josting, Petra}}, isbn = {{978-3-96848-094-7}}, pages = {{235--248}}, publisher = {{kopaed}}, title = {{{Held*innenträume. Superheldinnen und Superhelden selbst erdacht / Paderborner Grundschulkinder werden auf die Begegnung mit Salah Naoura vorbereitet}}}, volume = {{12}}, year = {{2023}}, } @book{42178, editor = {{Kruse, Iris and Josting, Petra}}, isbn = {{978-3-96848-094-7}}, pages = {{279}}, publisher = {{kopaed}}, title = {{{Salah Naoura}}}, volume = {{12}}, year = {{2023}}, } @article{44857, abstract = {{Ancestral reconstruction is a classic task in comparative genomics. Here, we study the genome median problem, a related computational problem which, given a set of three or more genomes, asks to find a new genome that minimizes the sum of pairwise distances between it and the given genomes. The distance stands for the amount of evolution observed at the genome level, for which we determine the minimum number of rearrangement operations necessary to transform one genome into the other. For almost all rearrangement operations the median problem is NP-hard, with the exception of the breakpoint median that can be constructed efficiently for multichromosomal circular and mixed genomes. In this work, we study the median problem under a restricted rearrangement measure called c4-distance, which is closely related to the breakpoint and the DCJ distance. We identify tight bounds and decomposers of the c4-median and develop algorithms for its construction, one exact ILP-based and three combinatorial heuristics. Subsequently, we perform experiments on simulated data sets. Our results suggest that the c4-distance is useful for the study the genome median problem, from theoretical and practical perspectives.}}, author = {{Silva, Helmuth O.M. and Rubert, Diego P. and Araujo, Eloi and Steffen, Eckhard and Doerr, Daniel and Martinez, Fábio V.}}, issn = {{0399-0559}}, journal = {{RAIRO - Operations Research}}, keywords = {{Management Science and Operations Research, Computer Science Applications, Theoretical Computer Science}}, number = {{3}}, pages = {{1045--1058}}, publisher = {{EDP Sciences}}, title = {{{Algorithms for the genome median under a restricted measure of rearrangement}}}, doi = {{10.1051/ro/2023052}}, volume = {{57}}, year = {{2023}}, } @unpublished{44859, author = {{Ma, Yulai and Mattiolo, Davide and Steffen, Eckhard and Wolf, Isaak Hieronymus}}, booktitle = {{arXiv:2305.08619}}, title = {{{Sets of r-graphs that color all r-graphs}}}, year = {{2023}}, } @article{44888, author = {{Lenz, Peter and Mahnken, Rolf}}, issn = {{1617-7061}}, journal = {{PAMM}}, keywords = {{Electrical and Electronic Engineering, Atomic and Molecular Physics, and Optics}}, number = {{1}}, publisher = {{Wiley}}, title = {{{Thermo‐chemo‐mechanical modelling of a curing process combined with mean‐field homogenization methods at large strains}}}, doi = {{10.1002/pamm.202200214}}, volume = {{22}}, year = {{2023}}, } @inproceedings{34294, author = {{Wolters, Dennis and Engels, Gregor}}, booktitle = {{MODELSWARD'23}}, isbn = {{978-989-758-633-0}}, issn = {{2184-4348}}, pages = {{133--142}}, publisher = {{SCITEPRESS}}, title = {{{Model-driven Collaborative Design of Professional Education Programmes With Extended Online Whiteboards}}}, doi = {{10.5220/0011675700003402}}, year = {{2023}}, } @unpublished{44887, author = {{Cheng, Chun and Song, Chunlei and Mahnken, Rolf and Yuan, Zhipeng and Yu, Liang and Ju, Xiaozhe}}, publisher = {{Elsevier BV}}, title = {{{A Non-Linear Mean-Field Debonding Model at Large Strains for the Analysis of Fibre Kinking in Ud Composites}}}, year = {{2023}}, } @article{44891, author = {{Westermann, Hendrik and Mahnken, Rolf}}, issn = {{1617-7061}}, journal = {{PAMM}}, keywords = {{Electrical and Electronic Engineering, Atomic and Molecular Physics, and Optics}}, number = {{1}}, publisher = {{Wiley}}, title = {{{A thermodynamic framework for the phase‐field approach considering carbide precipitation during phase transformations}}}, doi = {{10.1002/pamm.202200080}}, volume = {{22}}, year = {{2023}}, } @article{44892, author = {{Hamdoun, Ayoub and Mahnken, Rolf}}, issn = {{1617-7061}}, journal = {{PAMM}}, keywords = {{Electrical and Electronic Engineering, Atomic and Molecular Physics, and Optics}}, number = {{1}}, publisher = {{Wiley}}, title = {{{A finite strain gradient theory for viscoplasticity by means of micromorphic regularization}}}, doi = {{10.1002/pamm.202200074}}, volume = {{22}}, year = {{2023}}, } @article{44897, author = {{Kaimann, Daniel and Spiess Bru, Clarissa Laura Maria and Frick, Bernd}}, journal = {{Journal of Wine Economics}}, title = {{{Ratings Meet Prices: The Dynamic Relationship of Quality Signals}}}, year = {{2023}}, } @inproceedings{44502, abstract = {{In order to follow the 1.5 degree path of the Paris Climate Agreement, drastic greenhouse gas reduction measures are needed in the transport sector. The potential of public transport and new mobility services to reduce transport-related greenhouse gas emissions cannot yet be fully exploited, especially in rural regions. This paper presents the concept of an innovative mobility system, called NeMo.bil, that intends to fill the gap between individual and public transport to create a demand-oriented and sustainable mobility offer. The concept is based on convoy formation of autonomously driving lightweight vehicles serving the first and last mile and a larger towing vehicle carrying enough power and energy to move the convoy over longer distances at higher speeds. This combination of two different vehicles, intelligently controlled by a digital ecosystem, aims to significantly increasing energy, resource and cost efficiency. Based on an analysis of previous approaches for innovative mobility solutions, the concept is derived from a technical and sociological perspective and its potential for reducing energy demand is calculated.}}, author = {{Ostermann, Moritz and Behm, Jonathan and Marten, Thorsten and Tröster, Thomas and Weyer, Johannes and Cepera, Kay and Adelt, Fabian}}, booktitle = {{Towards the New Normal in Mobility}}, editor = {{Proff, Heike}}, isbn = {{9783658394370}}, location = {{Duisburg}}, publisher = {{Springer Fachmedien Wiesbaden}}, title = {{{Individualization of Public Transport – Integration of Technical and Social Dimensions of Sustainable Mobility}}}, doi = {{10.1007/978-3-658-39438-7_25}}, year = {{2023}}, } @article{45013, author = {{Codescu, M.-A. and Kunze, T. and Weiß, M. and Brehm, Martin and Kornilov, O. and Sebastiani, D. and Nibbering, E. T. J.}}, journal = {{J. Phys. Chem. Lett.}}, pages = {{4775--4785}}, title = {{{Ultrafast Proton Transfer Pathways Mediated by Amphoteric Imidazole}}}, doi = {{10.1021/acs.jpclett.3c00595}}, volume = {{14}}, year = {{2023}}, } @article{45012, author = {{Roos, E. and Sebastiani, D. and Brehm, Martin}}, journal = {{Phys. Chem. Chem. Phys.}}, pages = {{8755--8766}}, title = {{{A Force Field for Bio-Polymers in Ionic Liquids (BILFF) – Part 2: Cellulose in [EMIm][OAc] / Water Mixtures}}}, doi = {{10.1039/D2CP05636D}}, volume = {{25 (12)}}, year = {{2023}}, } @article{45011, author = {{Radicke, J. and Roos, E. and Sebastiani, D. and Brehm, Martin and Kressler, J.}}, journal = {{J. Polym. Sci.}}, pages = {{372--384}}, title = {{{Lactate-Based Ionic Liquids as Chiral Solvents for Cellulose}}}, doi = {{10.1002/pol.20220687}}, volume = {{61 (5)}}, year = {{2023}}, } @article{45134, abstract = {{The aim of the present study was to investigate if the presence of anterior cruciate ligament (ACL) injury risk factors depicted in the laboratory would reflect at-risk patterns in football-specific field data. Twenty-four female footballers (14.9 ± 0.9 year) performed unanticipated cutting maneuvers in a laboratory setting and on the football pitch during football-specific exercises (F-EX) and games (F-GAME). Knee joint moments were collected in the laboratory and grouped using hierarchical agglomerative clustering. The clusters were used to investigate the kinematics collected on field through wearable sensors. Three clusters emerged: Cluster 1 presented the lowest knee moments; Cluster 2 presented high knee extension but low knee abduction and rotation moments; Cluster 3 presented the highest knee abduction, extension, and external rotation moments. In F-EX, greater knee abduction angles were found in Cluster 2 and 3 compared to Cluster 1 (p = 0.007). Cluster 2 showed the lowest knee and hip flexion angles (p < 0.013). Cluster 3 showed the greatest hip external rotation angles (p = 0.006). In F-GAME, Cluster 3 presented the greatest knee external rotation and lowest knee flexion angles (p = 0.003). Clinically relevant differences towards ACL injury identified in the laboratory reflected at-risk patterns only in part when cutting on the field: in the field, low-risk players exhibited similar kinematic patterns as the high-risk players. Therefore, in-lab injury risk screening may lack ecological validity.}}, author = {{Di Paolo, Stefano and Nijmeijer, Eline M. and Bragonzoni, Laura and Gokeler, Alli and Benjaminse, Anne}}, issn = {{1424-8220}}, journal = {{Sensors}}, keywords = {{Electrical and Electronic Engineering, Biochemistry, Instrumentation, Atomic and Molecular Physics, and Optics, Analytical Chemistry}}, number = {{4}}, publisher = {{MDPI AG}}, title = {{{Definition of High-Risk Motion Patterns for Female ACL Injury Based on Football-Specific Field Data: A Wearable Sensors Plus Data Mining Approach}}}, doi = {{10.3390/s23042176}}, volume = {{23}}, year = {{2023}}, } @article{45154, author = {{Gokeler, Alli and Nijmeijer, E. M. and Heuvelmans, P. and Tak, I. and Ramponi, C. and Benjaminse, A.}}, issn = {{0933-7946}}, journal = {{Arthroskopie}}, keywords = {{Orthopedics and Sports Medicine}}, publisher = {{Springer Science and Business Media LLC}}, title = {{{Motor learning principles during rehabilitation after anterior cruciate ligament injury Prinzipien motorischen Lernens während der Rehabilitation nach vorderer Kreuzbandverletzung}}}, doi = {{10.1007/s00142-023-00606-1}}, year = {{2023}}, } @article{45159, author = {{Sherman, David A. and Baumeister, Jochen and Stock, Matt S. and Murray, Amanda M. and Bazett-Jones, David M. and Norte, Grant E.}}, issn = {{1388-2457}}, journal = {{Clinical Neurophysiology}}, keywords = {{Physiology (medical), Neurology (clinical), Neurology, Sensory Systems}}, pages = {{88--99}}, publisher = {{Elsevier BV}}, title = {{{Brain activation and single-limb balance following anterior cruciate ligament reconstruction}}}, doi = {{10.1016/j.clinph.2023.02.175}}, volume = {{149}}, year = {{2023}}, } @article{45149, abstract = {{IntroductionExergames are increasingly used in rehabilitation settings for older adults to train physical and cognitive abilities. To meet the potential that exergames hold, they need to be adapted to the individual abilities of the player and their training objectives. Therefore, it is important to know whether and how game characteristics affect their playing. The aim of this study is to investigate the effect of two different kinds of exergame (step game and balance game) played at two difficulty levels on brain activity and physical activity.MethodsTwenty-eight older independently living adults played two different exergames at two difficulty levels each. In addition, the same movements as during gaming (leaning sideways with feet in place and stepping sideways) were performed as reference movements. Brain activity was recorded using a 64-channel EEG system to assess brain activity, while physical activity was recorded using an accelerometer at the lower back and a heart rate sensor. Source-space analysis was applied to analyze the power spectral density in theta (4 Hz–7 Hz) and alpha-2 (10 Hz–12 Hz) frequency bands. Vector magnitude was applied to the acceleration data.ResultsFriedman ANOVA revealed significantly higher theta power for the exergaming conditions compared to the reference movement for both games. Alpha-2 power showed a more diverse pattern which might be attributed to task-specific conditions. Acceleration decreased significantly from the reference movement to the easy condition to the hard condition for both games.DiscussionThe results indicate that exergaming increases frontal theta activity irrespective of type of game or difficulty level, while physical activity decreases with increasing difficulty level. Heart rate was found to be an inappropriate measure in this population older adults. These findings contribute to understanding of how game characteristics affect physical and cognitive activity and consequently need to be taken into account when choosing appropriate games and game settings for exergame interventions.}}, author = {{Müller, Helen Martha and Baumeister, Jochen and Bardal, Ellen Marie and Vereijken, Beatrix and Skjæret-Maroni, Nina}}, issn = {{1663-4365}}, journal = {{Frontiers in Aging Neuroscience}}, keywords = {{Cognitive Neuroscience, Aging}}, publisher = {{Frontiers Media SA}}, title = {{{Exergaming in older adults: the effects of game characteristics on brain activity and physical activity}}}, doi = {{10.3389/fnagi.2023.1143859}}, volume = {{15}}, year = {{2023}}, } @article{43092, abstract = {{By using coordinating anions such as acetate, a water-in-salt-like coordination environment of Zn ions is achieved in relatively dilute conditions, leading to prolonged and efficient cycling of zinc metal anodes.}}, author = {{Gomez Vazquez, Dario and Pollard, Travis P. and Mars, Julian and Yoo, Ji Mun and Steinrück, Hans-Georg and Bone, Sharon E. and Safonova, Olga V. and Toney, Michael F. and Borodin, Oleg and Lukatskaya, Maria R.}}, issn = {{1754-5692}}, journal = {{Energy & Environmental Science}}, keywords = {{Pollution, Nuclear Energy and Engineering, Renewable Energy, Sustainability and the Environment, Environmental Chemistry}}, pages = {{1982--1991 (2023).}}, publisher = {{Royal Society of Chemistry (RSC)}}, title = {{{Creating water-in-salt-like environment using coordinating anions in non-concentrated aqueous electrolytes for efficient Zn batteries}}}, doi = {{10.1039/d3ee00205e}}, volume = {{16}}, year = {{2023}}, } @article{44271, author = {{Weadock, Nicholas J. and Sterling, Tyler C. and Vigil, Julian A. and Gold-Parker, Aryeh and Smith, Ian C. and Ahammed, Ballal and Krogstad, Matthew J. and Ye, Feng and Voneshen, David and Gehring, Peter M. and Rappe, Andrew M. and Steinrück, Hans-Georg and Ertekin, Elif and Karunadasa, Hemamala I. and Reznik, Dmitry and Toney, Michael F.}}, issn = {{2542-4351}}, journal = {{Joule}}, keywords = {{General Energy}}, pages = {{1051--1066}}, publisher = {{Elsevier BV}}, title = {{{The nature of dynamic local order in CH3NH3PbI3 and CH3NH3PbBr3}}}, doi = {{10.1016/j.joule.2023.03.017}}, volume = {{7}}, year = {{2023}}, } @inbook{45185, author = {{Hannebohm, Ronja}}, booktitle = {{Biopolitik(en) in Literatur, Film und Serie: Aushandlungs- und Reflexionsräume vom 18. Jahrhundert bis heute}}, editor = {{Hannebohm, Ronja and Harmening, Anda-Lisa}}, location = {{Paderborn}}, pages = {{17--36}}, publisher = {{LibreCat University}}, title = {{{Biopolitik und Biopoethik. Modi der Aushandlung menschlichen Lebens in (Gegenwarts-)Literatur, Film und Serie}}}, doi = {{10.17619/UNIPB/1-1721}}, volume = {{4}}, year = {{2023}}, } @book{45184, editor = {{Hannebohm, Ronja and Harmening, Anda-Lisa Martha Josephine Anna}}, location = {{Paderborn}}, pages = {{297}}, publisher = {{LibreCat University}}, title = {{{Biopolitik(en) in Literatur, Film und Serie: Aushandlungs- und Reflexionsräume vom 18. Jahrhundert bis heute}}}, doi = {{10.17619/UNIPB/1-1721}}, volume = {{4}}, year = {{2023}}, } @phdthesis{43108, author = {{Pauck, Felix}}, publisher = {{Paderborn University}}, title = {{{Cooperative Android App Analysis}}}, doi = {{10.17619/UNIPB/1-1698}}, year = {{2023}}, } @inbook{45186, abstract = {{Die Überreste vom Tornado in Paderborn Was bleibt, sind die Scherben von zerbrochenen Dachziegeln. Olav Schiedel sammelt und kartiert Fragmente dieser Ziegel entlang der Tornadoschneise. Aus dem Objekt „Scherbe” wird das Material für eine künstlerische Auseinandersetzung. Die Ausstellung „Scherben“ verknüpft Archäologie mit bildender Kunst und zeigt die aktuelle Stadtgeschichte aus einer anderen, ungewohnten Perspektive. }}, author = {{Langer, Svenja}}, booktitle = {{Scherben. Der Katalog zur Ausstellung. Olav Schiedel im Raum für Kunst Paderborn. 20.05.-04.06.2023}}, keywords = {{Ausstellung, Katalog, Tornado, Scherbe, Dachziegel, Spur, Kunst}}, pages = {{6 -- 7}}, publisher = {{Lektora}}, title = {{{Impulse zur Scherbe als Spur und künstlerisches Material}}}, volume = {{1}}, year = {{2023}}, } @inproceedings{45188, author = {{Werthmann, Julian and Scheideler, Christian and Coy, Sam and Czumaj, Artur and Schneider, Philipp}}, title = {{{Routing Schemes for Hybrid Communication Networks}}}, doi = {{10.48550/ARXIV.2210.05333}}, year = {{2023}}, } @inproceedings{45193, author = {{Dou, Jinfeng and Götte, Thorsten and Hillebrandt, Henning and Scheideler, Christian and Werthmann, Julian}}, booktitle = {{Proc. of the 42nd ACM Symposium on Principles of Distributed Computing (PODC '23)}}, location = {{Orlando, USA}}, title = {{{Brief Announcement: Distributed Construction of Near-Optimal Compact Routing Schemes for Planar Graphs}}}, year = {{2023}}, } @inproceedings{44855, abstract = {{Market transactions are subject to information asymmetry about the delivered value proposition, causing transaction costs and adverse market effects among buyers and sellers. Information systems research has investigated how review systems can reduce information asymmetry in business-to-consumer markets. However, these systems cannot be readily applied to business-to-business markets, are vulnerable to manipulation, and suffer from conceptual weak spots since they use textual data or star ratings. Building on design science research, we conceptualize a new class of reputation systems based on monetary-based payments as quantitative ratings for each transaction stored on a blockchain. Using cryptography, we show that our system assures content confidentiality so that buyers can share and sell their ratings selectively, establishing a reputation ecosystem. Our prescriptive insights advance the design of reputation systems and offer new paths to understanding the antecedents, dynamics, and consequences to reduce information asymmetry in B2B transactions.}}, author = {{Hemmrich, Simon and Bobolz, Jan and Beverungen, Daniel and Blömer, Johannes}}, booktitle = {{ECIS 2023 Research Papers}}, title = {{{Designing Business Reputation Ecosystems — A Method for Issuing and Trading Monetary Ratings on a Blockchain}}}, year = {{2023}}, } @inproceedings{45205, author = {{Dreiling, Dmitrij and Itner, Dominik and Hetkämper, Tim and Birk, Carolin and Gravenkamp, Hauke and Henning, Bernd}}, booktitle = {{SMSI 2023 Conference}}, isbn = {{978-3-9819376-8-8}}, location = {{Nürnberg}}, pages = {{394 -- 395}}, publisher = {{AMA Association For Sensors And Measurement}}, title = {{{Improved determination of viscoelastic material parameters using a pulse-echo measurement setup}}}, doi = {{10.5162/SMSI2023/P59}}, year = {{2023}}, } @inproceedings{43027, author = {{Seutter, Janina and Bartelheimer, Christian and Kundisch, Dennis}}, booktitle = {{Proceedings of the 18th International Conference on Design Science Research in Information Systems and Technology}}, location = {{Pretoria, South Africa}}, title = {{{Supporting Innovation through B2B Reviews – A Taxonomy of B2B Online Review Environments}}}, year = {{2023}}, } @article{45192, author = {{Götte, Thorsten and Hinnenthal, Kristian and Scheideler, Christian and Werthmann, Julian}}, journal = {{Distributed Computing}}, title = {{{Time-Optimal Construction of Overlays}}}, doi = {{https://doi.org/10.1007/s00446-023-00442-4}}, year = {{2023}}, } @inproceedings{40063, author = {{Jabr, Wael and Gutt, Dominik and Neumann, Jürgen and Kundisch, Dennis}}, booktitle = {{Proceedings of the 45th ISMS Marketing Science Conference}}, location = {{Miami, USA}}, title = {{{Updating at the Expense of Demand? The Case of Platform Apps}}}, year = {{2023}}, } @misc{45243, author = {{N., N.}}, title = {{{Development and Evaluation of a Model-Based UI Prototyping Experimentation Approach}}}, year = {{2023}}, } @article{44890, author = {{Tchomgue Simeu, Arnold and Mahnken, Rolf}}, issn = {{1617-7061}}, journal = {{PAMM}}, keywords = {{Electrical and Electronic Engineering, Atomic and Molecular Physics, and Optics}}, number = {{1}}, publisher = {{Wiley}}, title = {{{Goal‐oriented adaptivity based on a model hierarchy of mean‐field and full‐field homogenization methods in elasto‐plasticity}}}, doi = {{10.1002/pamm.202200053}}, volume = {{22}}, year = {{2023}}, } @inbook{45266, author = {{Dorogova, Elizaveta}}, booktitle = {{Hermeneutiken der Weisheit}}, editor = {{Oeming, Manfred and Schmidt, Nora}}, title = {{{Weisheit und moralischer Intellektualismus im Koran aus intertextueller Perspektive}}}, year = {{2023}}, } @article{34833, author = {{Hanusch, Maximilian}}, journal = {{Indagationes Mathematicae.}}, keywords = {{Lie group actions and analytic 1-submanifolds}}, number = {{4}}, pages = {{752--811}}, title = {{{Decompositions of Analytic 1-Manifolds}}}, doi = {{10.1016/j.indag.2023.02.003}}, volume = {{34}}, year = {{2023}}, } @misc{45267, author = {{Dorogova, Elizaveta}}, booktitle = {{Theologie und Glaube}}, title = {{{Rezension zu Martin Breul/Klaus Viertbauer (Hg.), Der Glaube und seine Gründe, Tübingen: Mohr Siebeck 2022, brosch.}}}, year = {{2023}}, } @book{45279, author = {{Szczepaniak-Kozak, Anna and Farrell, Angela and Ballweg, Sandra and Daase, Andrea and Wąsikiewicz-Firlej, Emilia and Masterson, Mary}}, isbn = {{9783847115632}}, publisher = {{V&R unipress}}, title = {{{Promoting multilingual practices in school and home environments}}}, doi = {{10.14220/9783737015639}}, year = {{2023}}, } @inbook{45277, author = {{Kulgemeyer, Christoph and Sterzing, Fabian and Hörnlein, Madeleine}}, booktitle = {{Digital Physik unterrichten. Grundlagen, Impulse, Perspektiven}}, editor = {{Wilhelm, Thomas}}, pages = {{230--244}}, publisher = {{Klett Kallmeyer}}, title = {{{Aus Erklärvideos lernen}}}, year = {{2023}}, } @article{37200, abstract = {{(1) This work answers the question of whether and to what extent there is a significant difference in mechanical properties when different additive manufacturing processes are applied to the material 1.2709. The Laser-Powder-Bed-Fusion (L-PBF) and Laser-Metal-Deposition (LMD) processes are considered, as they differ fundamentally in the way a part is manufactured. (2) Known process parameters for low-porosity parts were used to fabricate tensile strength specimens. Half of the specimens were heat-treated, and all specimens were tested for mechanical properties in a quasi-static tensile test. In addition, the material hardness was determined. (3) It was found that, firstly, heat treatment resulted in a sharp increase in mechanical properties such as hardness, elastic modulus, yield strength and ultimate strength. In addition to the increase in these properties, the elongation at break also decreases significantly after heat treatment. The choice of process, on the other hand, does not give either process a clear advantage in terms of mechanical properties but shows that it is necessary to consider the essential mechanical properties for a desired application.}}, author = {{Gnaase, Stefan and Niggemeyer, Dennis and Lehnert, Dennis and Bödger, Christian and Tröster, Thomas}}, issn = {{2073-4352}}, journal = {{Crystals}}, keywords = {{Inorganic Chemistry, Condensed Matter Physics, General Materials Science, General Chemical Engineering}}, number = {{2}}, publisher = {{MDPI AG}}, title = {{{Comparative Study of the Influence of Heat Treatment and Additive Manufacturing Process (LMD & L-PBF) on the Mechanical Properties of Specimens Manufactured from 1.2709}}}, doi = {{10.3390/cryst13020157}}, volume = {{13}}, year = {{2023}}, } @article{45299, abstract = {{Many applications are driven by Machine Learning (ML) today. While complex ML models lead to an accurate prediction, their inner decision-making is obfuscated. However, especially for high-stakes decisions, interpretability and explainability of the model are necessary. Therefore, we develop a holistic interpretability and explainability framework (HIEF) to objectively describe and evaluate an intelligent system’s explainable AI (XAI) capacities. This guides data scientists to create more transparent models. To evaluate our framework, we analyse 50 real estate appraisal papers to ensure the robustness of HIEF. Additionally, we identify six typical types of intelligent systems, so-called archetypes, which range from explanatory to predictive, and demonstrate how researchers can use the framework to identify blind-spot topics in their domain. Finally, regarding comprehensiveness, we used a random sample of six intelligent systems and conducted an applicability check to provide external validity.}}, author = {{Kucklick, Jan-Peter}}, issn = {{1246-0125}}, journal = {{Journal of Decision Systems}}, keywords = {{Explainable AI (XAI), machine learning, interpretability, real estate appraisal, framework, taxonomy}}, pages = {{1--41}}, publisher = {{Taylor & Francis}}, title = {{{HIEF: a holistic interpretability and explainability framework}}}, doi = {{10.1080/12460125.2023.2207268}}, year = {{2023}}, } @inbook{42087, author = {{Kamcili-Yildiz, Naciye}}, booktitle = {{Hadithdidaktik im Diskurs}}, editor = {{Yaşar , Sarıkaya and Rothgangel, Martin and Grün, Déborah Kathleen and Soyhun, Mehmet}}, pages = {{173 -- 188}}, publisher = {{Waxmann Verlag}}, title = {{{Sprachsensibles Arbeiten mit Hadithen im Islamischen Religionsunterricht}}}, volume = {{6}}, year = {{2023}}, } @inbook{42095, author = {{Kamcili-Yildiz, Naciye and Tautz, Monika}}, booktitle = {{Islamunterricht im Diskurs. Religionspädagogische und fachdidaktische Ansätze}}, editor = {{Badawia, Tarek and Topalovic, Said}}, publisher = {{Vandenhoeck & Ruprecht Verlag}}, title = {{{Was heißt religiöses gebildet? Konzepte religiöser Bildung von islamischen Religionspädagogen}}}, year = {{2023}}, } @techreport{42223, author = {{Aghaei Abrandabadi, Seyed Ali and Bahrololoumi, Faranak and Hajdas, Irka and Jafarian, Rasul and Kordavani, Lili and Marx, Michael}}, pages = {{1--15}}, publisher = {{Cambridge University Press}}, title = {{{Radiocarbon Dating Of Manuscripts Kept in the Central Library of the University of Tehran}}}, year = {{2023}}, } @inbook{42222, author = {{Aghaei Abrandabadi, Seyed Ali}}, booktitle = {{Hadith Commentary: Continuity and Change}}, editor = {{Blecher, Joel and Brinkmann, Stefanie}}, publisher = {{Edinburgh University Press}}, title = {{{The Hermeneutics of al-Sharīf al-Murtaḍā (d. 436/1044) in the interpretation of Akhbār al-Āḥād in his Kitāb al-Amālī}}}, year = {{2023}}, } @book{36038, author = {{Hartmann, Alexandra}}, isbn = {{978-3-031-20946-8}}, publisher = {{Palgrave MacMillan}}, title = {{{The Black Humanist Tradition in Anti-Racist Literature: A Fragile Hope}}}, doi = {{https://doi.org/10.1007/978-3-031-20947-5}}, year = {{2023}}, } @book{45310, author = {{Teichert, Jeannine}}, publisher = {{Springer VS}}, title = {{{Wie digitale Medien die kommunikative Aushandlung von Freundschaften verändern}}}, year = {{2023}}, } @article{45311, author = {{Teichert, Jeannine and Meister., D.M.}}, journal = {{MedienPädagogik}}, title = {{{Mediale Identitätsaushandlungen deutscher MigrantInnen im Zuge des Brexit}}}, year = {{2023}}, } @inproceedings{45312, author = {{Karakaya, Kadiray and Bodden, Eric}}, booktitle = {{2023 IEEE Conference on Software Testing, Verification and Validation (ICST)}}, publisher = {{IEEE}}, title = {{{Two Sparsification Strategies for Accelerating Demand-Driven Pointer Analysis}}}, doi = {{10.1109/icst57152.2023.00036}}, year = {{2023}}, } @misc{43375, author = {{Koch, Angelina}}, title = {{{Privacy-Preserving Collection and Evaluation of Log Files}}}, year = {{2023}}, } @techreport{45364, author = {{Kempkes, Jens Peter and Kreuzhage, Katharina and Kundisch, Dennis and Seutter, Janina and Weskamp, Christoph}}, title = {{{Digitale Transformation im Theater – Mittels Besucherforschung und Entscheidungsunterstützung zur besseren Angebotsgestaltung}}}, volume = {{172}}, year = {{2023}}, } @techreport{45370, abstract = {{Aufgrund der Leichtbauweise von Fahrzeugkarosserien werden konventionelle Stahlgüten durch ultrahöchstfeste Stahlwerkstoffe ersetzt. Die hohe Festigkeit dieser Werkstoffe stellt eine Herausforderung für das mechanische Fügen dar. Weil diese Stahlwerkstoffe zunehmend in erhöhter Dicke eingesetzt werden, wird die Leistungsfähigkeit konventioneller Halbhohlstanzniete überschritten. Im Rahmen des Forschungsvorhabens wurde ein Stanzniet erarbeitet, welcher eine Erweiterung des Einsatzbereichs des Halbhohlstanznietens auf stempelseitige Fügeteile aus höchstfesten und ultrahöchstfesten Stahlwerkstoffen bei großer Materialdicke ermöglicht. Zunächst wurden Referenzverbindungen mit handelsüblichen Stanznieten erstellt und analysiert. Durch die simulationsgestützte Ermittlung der Spannungs- und Dehnungsverhältnisse im Stanzniet wurden Ansätze für die Modifizierung der Stanzniete erarbeitet. Ebenso wurde der Einfluss der einzelnen Geometrieparameter des Stanzniets auf die Verformung des Stanzniets und die Verbindungsausbildung untersucht. Parallel dazu, wurden die mechanischen Eigenschaften potenzieller Stanznietwerkstoffe charakterisiert und eine angepasste Wärmebehandlungsstrategie erarbeitet. Durch die Modifizierung der Werkstofflegierung und der Wärmebehandlung kann eine Erhöhung der Festigkeit des Stanznietwerkstoffs um ca. 20 % gegenüber der bisher üblichen Härteklasse H6 erreicht werden. Daher kann eine Stanznietgeometrie mit einem bisher üblichen Nenndurchmesser von 5,5 mm verwendet werden. Die neuen Stanzniete wurden experimentell in einem zweistufigen Kaltumformprozess hergestellt. Abschließend wurde die erarbeitete Lösung basierend auf experimentellen Versuchen analysiert.}}, author = {{Uhe, Benedikt and Meschut, Gerson}}, pages = {{110}}, title = {{{Lösungsstrategien für das Halbhohlstanznieten von höchstfesten und ultrahöchstfesten Stählen mit Aluminiumwerkstoffen}}}, volume = {{592}}, year = {{2023}}, } @inbook{45171, author = {{Weiler, David and Burde, Jan-Philipp and Große-Heilmann, Rike Isabel and Lachner, Andreas and Riese, Josef and Schubatzky, Thomas}}, booktitle = {{Lehr-Lern-Labore und Digitalisierung}}, editor = {{Meier, Monique and Greefrath, Gilbert and Hammann, Marcus and Wodzinski, Rita and Ziepprecht, Kathrin}}, isbn = {{9783658401085}}, issn = {{2524-8677}}, pages = {{47--62}}, publisher = {{Springer Fachmedien Wiesbaden}}, title = {{{Förderung von digitalisierungsbezogenen Kompetenzen von angehenden Physiklehrkräften mit dem SQD-Modell im Projekt DiKoLeP}}}, doi = {{10.1007/978-3-658-40109-2_4}}, year = {{2023}}, } @article{45401, abstract = {{Abstract This paper investigates the price impact of the fuel discount in Germany, which was introduced between June and August 2022 to partially compensate increased energy costs. Using the augmented synthetic control method (ASCM) to construct the counterfactual, we provide quantitative evidence to the heated debate concerning the impact of this policy tool and find the fuel discount to have decreased consumer prices of petrol (diesel) by at least 0.30 euro per litre (0.10 euro per litre) on average. The results are robust to various sensitivity checks. Thus, oil companies and petrol stations decreased prices for consumers and passed on about 85 % (65 %) of the discount in case of petrol (diesel). Moreover, we do not find signs of excessive price increases in anticipation of the fuel discount.}}, author = {{Seiler, Volker and Stöckmann, Nico}}, issn = {{1465-6485}}, journal = {{German Economic Review}}, keywords = {{Economics and Econometrics}}, publisher = {{Walter de Gruyter GmbH}}, title = {{{The Impact of the German Fuel Discount on Prices at the Petrol Pump}}}, doi = {{10.1515/ger-2022-0108}}, year = {{2023}}, } @inproceedings{45398, author = {{Kulgemeyer, Christoph and Sterzing, Fabian and Hörnlein, Madeleine}}, editor = {{Van Vorst, Helena}}, location = {{Aachen}}, publisher = {{Gesellschaft für Didaktik der Chemie und Physik (GDCP)}}, title = {{{Von der "Shallowing Hypothese" zur "Illusion of Understanding" -wie wirken Erklärvideos und Lehrbuchtexte auf Wissen und Verstehensillusion?}}}, year = {{2023}}, } @inproceedings{45399, author = {{Hörnlein, Madeleine and Kulgemeyer, Christoph}}, editor = {{Van Vorst, Helena}}, location = {{Aachen}}, publisher = {{Gesellschaft für Didaktik der Chemie und Physik (GDCP)}}, title = {{{"Aus Erklärvideos lernt man nur oberflächlich" - oder erwirbt man auch Konzeptwissen?}}}, year = {{2023}}, } @inbook{45439, author = {{Kamcili-Yildiz, Naciye}}, booktitle = {{Islamischer Religionsunterricht in Deutschland}}, editor = {{Körs, Anna}}, title = {{{Glaubende Grundhaltung als Zugang zum IslamTheologische Kompetenzen von islamischen Religionslehrkräften}}}, year = {{2023}}, } @article{45444, author = {{Althaus, Maike and Müller, Stefanie Jutta Marianne and Kundisch, Dennis}}, journal = {{International Journal of Cultural Policy}}, title = {{{What Price Culture? – A Taxonomy of the Admission Pricing Policy at Museums}}}, year = {{2023}}, } @article{41492, abstract = {{The current investigation shows the feasibility of 316L steel powder production via three different argon gas atomisation routes (closed coupled atomisation, free fall atomisation with and without hot gas), along with subsequent sample production by laser powder bed fusion (PBF-LB). Here, a mixture of pure Fe and atomised 316L steel powder is used for PBF-LB to induce a chemical composition gradient in the microstructure. Optical microscopy and μ-CT investigations proved that the samples processed by PBF-LB exhibit very little porosity. Combined EBSD-EDS measurements show the chemical composition gradient leading to the formation of a local fcc-structure. Upon heat treatment (1100 °C, 14 h), the chemical composition is homogeneous throughout the microstructure. A moderate decrease (1060 to 985 MPa) in the sample’s ultimate tensile strength (UTS) is observed after heat treatment. However, the total elongation of the as-built and heat-treated samples remains the same (≈22%). Similarly, a slight decrease in the hardness from 341 to 307 HV1 is observed upon heat treatment.}}, author = {{Pramanik, Sudipta and Andreiev, Anatolii and Hoyer, Kay-Peter and Krüger, Jan Tobias and Hengsbach, Florian and Kircheis, Alexander and Zhao, Weiyu and Fischer-Bühner, Jörg and Schaper, Mirko}}, issn = {{2674-0516}}, journal = {{Powders}}, number = {{1}}, pages = {{59--74}}, publisher = {{MDPI AG}}, title = {{{Powder Production via Atomisation and Subsequent Laser Powder Bed Fusion Processing of Fe+316L Steel Hybrid Alloy}}}, doi = {{10.3390/powders2010005}}, volume = {{2}}, year = {{2023}}, } @article{43441, abstract = {{This paper reveals the 3D character of the intermetallic layer at the aluminum–steel interface which pops up above the original sample surface during annealing. Popping out of the intermetallics was proven using atomic force microscopy. The phase expands out of the plane due to the exothermic formation of the Al5Fe2 phase and the feasibility of surface diffusion. Milling by a focused ion beam enabled the comparison of the chemical composition of the surface layer with the bulk interface, showing no difference. The growth direction is both towards aluminum and steel — the main diffusion flux is from aluminum towards steel, and the new intermetallic phase emerges at the steel side. The shortage of Al atoms causes a shift of the intermetallic as a whole towards aluminum.}}, author = {{Šlapáková, Michaela and Kihoulou, Barbora and Veselý, Jozef and Minárik, Peter and Fekete, Klaudia and Knapek, Michal and Králík, Rostislav and Grydin, Olexandr and Stolbchenko, Mykhailo and Schaper, Mirko}}, issn = {{0042-207X}}, journal = {{Vacuum}}, keywords = {{Al-steel clad, twin-roll casting, 3D characterization, atomic force microscopy, diffusion direction, surface growth}}, publisher = {{Elsevier BV}}, title = {{{3D-structure of intermetallic interface layer in Al–steel clad material}}}, doi = {{10.1016/j.vacuum.2023.112043}}, volume = {{212}}, year = {{2023}}, } @inbook{45360, author = {{Haase, Michael and Bieber, Maximilian and Tasche, Frederik and Schaper, Mirko and Hoyer, Kay-Peter and Ponik, Bernd and Magyar, Balázs}}, booktitle = {{Proceedings of the 19th Rapid.Tech 3D Conference Erfurt, Germany, 9–11 May 2023}}, editor = {{Kynast, Michael and Eichmann, Michael and Witt, Gerd}}, isbn = {{978-3-446-47941-8}}, publisher = {{Carl Hanser Verlag GmbH & Co. KG}}, title = {{{Umsetzung einer optimierten Oberflächenschlitzung zur Wirbelstromverlustreduktion auf der Oberfläche eines additiv gefertigten Permanentmagnet-Rotors}}}, year = {{2023}}, } @article{44078, author = {{Andreiev, Anatolii and Hoyer, Kay-Peter and Hengsbach, Florian and Haase, Michael and Tasche, Lennart and Duschik, Kristina and Schaper, Mirko}}, issn = {{0924-0136}}, journal = {{Journal of Materials Processing Technology}}, keywords = {{Industrial and Manufacturing Engineering, Metals and Alloys, Computer Science Applications, Modeling and Simulation, Ceramics and Composites}}, publisher = {{Elsevier BV}}, title = {{{Powder bed fusion of soft-magnetic iron-based alloys with high silicon content}}}, doi = {{10.1016/j.jmatprotec.2023.117991}}, volume = {{317}}, year = {{2023}}, }