@article{64876,
  abstract     = {{<jats:title>ABSTRACT</jats:title>
                  <jats:p>This study shows the applicability of ultrasonic sensors for measuring two‐phase layer heights in sieve tray columns under dynamic operating conditions. Although these sensors are known for their precision in stationary systems, their reliability under fluctuating flow conditions has remained unclear. To validate their accuracy, ultrasonic measurements were compared with both automated image analysis via a Python algorithm and manual video evaluation. Results show that ultrasonic sensors maintain high precision at moderate gas loads and with small hole diameters. Increased gas loads and turbulence, however, reduced measurement accuracy due to signal scattering. The findings highlight the potential of ultrasonic sensing for real‐time, noninvasive monitoring in dynamic multiphase systems.</jats:p>}},
  author       = {{Breuer, Niklas and Grünewald, Marcus and Riese, Julia}},
  issn         = {{0009-286X}},
  journal      = {{Chemie Ingenieur Technik}},
  publisher    = {{Wiley}},
  title        = {{{Application of Ultrasonic Sensors for Determining the Height of Dynamic Two‐Phase Layers in Tray Columns}}},
  doi          = {{10.1002/cite.70087}},
  year         = {{2026}},
}

@article{64877,
  author       = {{Taheri, Behnood and Kopylov, Denis and Hammer, Manfred and Meier, Torsten and Förstner, Jens and Sharapova, Polina R.}},
  journal      = {{arXiv}},
  title        = {{{Gain-induced spectral non-degeneracy in type-II parametric down-conversion}}},
  doi          = {{10.48550/ARXIV.2603.01656}},
  year         = {{2026}},
}

@article{64887,
  abstract     = {{<jats:title>Abstract</jats:title>
                  <jats:p>Lachgas gelangt etwa aus Düngemitteln, Abgasen oder Narkosemitteln in die Atmosphäre und verursacht rund sechs Prozent der globalen Erwärmung. Effiziente Methoden, Lachgas abzubauen, gibt es bisher nicht. Wie ein neuer metallfreier Katalysator helfen könnte.</jats:p>}},
  author       = {{Paradies, Jan}},
  issn         = {{1439-9598}},
  journal      = {{Nachrichten aus der Chemie}},
  number       = {{1}},
  pages        = {{61--63}},
  publisher    = {{Wiley}},
  title        = {{{Nichts zu lachen – oder doch?}}},
  doi          = {{10.1002/nadc.20264154740}},
  volume       = {{74}},
  year         = {{2026}},
}

@article{64886,
  abstract     = {{<jats:p>
                    In the young field of enantioselective catalysis by frustrated Lewis pairs, the search for new chiral backbones for Lewis acids is desirable for future developments of the field. By taking advantage of the toluenesulfinyl group, a very useful traceless chiral auxiliary, it was possible to decorate stereopure axially chiral biphenyl tolyl sulfoxides and access unique chiral quaterphenyl tolyl sulfoxides by directed
                    <jats:italic>ortho</jats:italic>
                    ‐metalation and electrophile trapping as well as a dynamic kinetic asymmetric arylative cross‐coupling. The resulting chiral backbone is amenable to accessing chiral boron‐based Lewis acids by conversion of the sulfinyl group to boron‐based ones.
                  </jats:p>}},
  author       = {{Berreur, Jordan and Bortoluzzi, Julien and Köring, Laura and Leroux, Frédéric R. and Paradies, Jan and Panossian, Armen}},
  issn         = {{1434-1948}},
  journal      = {{European Journal of Inorganic Chemistry}},
  publisher    = {{Wiley}},
  title        = {{{Double Functionalization of Atropisomeric Biphenyl Sulfoxides by                    <i>Ortho</i>                    ‐Metalation and DYKAT Toward Chiral Quaterphenyl‐Based Borane Lewis Acids}}},
  doi          = {{10.1002/ejic.70158}},
  year         = {{2026}},
}

@article{64656,
  abstract     = {{<jats:title>ABSTRACT</jats:title>
                  <jats:p>The filament extension atomization is a promising process for spraying various materials with the potential to produce narrow droplet size distributions. This study systematically investigates the behavior of different fluids and suspensions in the process in order to determine its application limits and identify optimal process parameters. Particular attention was paid to the rheological properties, droplet size distributions, and circularity of the particles produced. The results show that the rotational speed of the rollers and the fluid loading are significant influencing parameters for the resulting particle properties.</jats:p>}},
  author       = {{Neukötter, Moritz and Aulbur, Nick and Neudorf, Julian and Jesinghausen, Steffen and Schmid, Hans‐Joachim}},
  issn         = {{0009-286X}},
  journal      = {{Chemie Ingenieur Technik}},
  publisher    = {{Wiley}},
  title        = {{{The Filament Extension Atomization Process for Powder Production of Elastic Fluids}}},
  doi          = {{https://doi.org/10.1002/cite.70073}},
  year         = {{2026}},
}

@inproceedings{64823,
  abstract     = {{Current legal frameworks enforce that Android developers accurately report the data their apps collect. However, large codebases can make this reporting challenging. This paper employs an empirical approach to understand developers' experience with Google Play Store's Data Safety Section (DSS) form.

We first survey 41 Android developers to understand how they categorize privacy-related data into DSS categories and how confident they feel when completing the DSS form. To gain a broader and more detailed view of the challenges developers encounter during the process, we complement the survey with an analysis of 172 online developer discussions, capturing the perspectives of 642 additional developers. Together, these two data sources represent insights from 683 developers.

Our findings reveal that developers often manually classify the privacy-related data their apps collect into the data categories defined by Google-or, in some cases, omit classification entirely-and rely heavily on existing online resources when completing the form. Moreover, developers are generally confident in recognizing the data their apps collect, yet they lack confidence in translating this knowledge into DSS-compliant disclosures. Key challenges include issues in identifying privacy-relevant data to complete the form, limited understanding of the form, and concerns about app rejection due to discrepancies with Google's privacy requirements.
These results underscore the need for clearer guidance and more accessible tooling to support developers in meeting privacy-aware reporting obligations. }},
  author       = {{Khedkar, Mugdha and Schlichtig, Michael and Soliman, Mohamed Aboubakr Mohamed and Bodden, Eric}},
  booktitle    = {{Proceedings of the IEEE/ACM 13th International Conference on Mobile Software Engineering and Systems (MOBILESoft '26). Association for Computing Machinery, New York, NY, USA, 65–68.}},
  keywords     = {{static analysis, data collection, data protection, privacy-aware reporting}},
  location     = {{Rio de Janeiro, Brazil}},
  title        = {{{Challenges in Android Data Disclosure: An Empirical Study.}}},
  year         = {{2026}},
}

@article{64821,
  author       = {{Khedkar, Mugdha and Schlichtig, Michael and Atakishiyev, Nihad and Bodden, Eric}},
  journal      = {{Automated Software Engineering }},
  number       = {{2}},
  publisher    = {{Springer US}},
  title        = {{{Between Law and Code: Challenges and Opportunities for Automating Privacy Assessments}}},
  doi          = {{10.1007/s10515-026-00601-4}},
  volume       = {{33}},
  year         = {{2026}},
}

@article{64907,
  author       = {{Fuchs, Christian}},
  journal      = {{ORF Public Value Texte}},
  number       = {{30}},
  pages        = {{66--71}},
  title        = {{{Warum wir ein Public-Service-Internet brauchen, nicht die Definanzierung öffentlicher Medien}}},
  year         = {{2026}},
}

@misc{64904,
  author       = {{Kombert, Sounia and Sureth-Sloane, Caren}},
  booktitle    = {{Frankfurter Allgemeine Zeitung}},
  number       = {{51}},
  pages        = {{16, Sp. 1--4}},
  title        = {{{Schocks durch Zölle und Steuern. Handelskonflikte und Abkommen werden zur zentralen Frage für Unternehmen. Wie bewältigen sie die neue Unsicherheit?}}},
  year         = {{2026}},
}

@article{64903,
  author       = {{Hoppe, Thomas and Schanz, Deborah and Sturm, Susann and Sureth-Sloane, Caren}},
  journal      = {{Schmalenbach IMPULSE}},
  number       = {{6}},
  pages        = {{1--12}},
  title        = {{{Steuerkomplexität: Wie lässt sie sich messen und welche Folgen hat sie?}}},
  doi          = {{10.54585/IEZK8936}},
  year         = {{2026}},
}

@misc{64910,
  author       = {{Prikoszovits, Matthias}},
  booktitle    = {{Deutsch als Fremdsprache}},
  issn         = {{2198-2430}},
  number       = {{1}},
  pages        = {{59 -- 61}},
  publisher    = {{Erich Schmidt Verlag GmbH & Co. KG}},
  title        = {{{Hilke Lindner-Matthiesen: Sprachbildung in Maßnahmen der beruflichen Integration. Praxisorientierte Qualitätsstandards und Weiterbildungskonzepte für die berufsqualifizierende Sprachförderung}}},
  doi          = {{10.37307/j.2198-2430.2026.01.09}},
  volume       = {{63}},
  year         = {{2026}},
}

@inproceedings{64909,
  author       = {{Khedkar, Mugdha and Schlichtig, Michael and Bodden, Eric}},
  booktitle    = {{IEEE International Conference on Software Analysis, Evolution and Reengineering (SANER 2026)}},
  title        = {{{Source Code-Driven GDPR Documentation: Supporting RoPA with Assessor View}}},
  year         = {{2026}},
}

@article{64913,
  author       = {{Gundlach, Fabian and Seguin, Beranger Fabrice}},
  issn         = {{0021-8693}},
  journal      = {{Journal of Algebra}},
  publisher    = {{Elsevier BV}},
  title        = {{{On matrices commuting with their Frobenius}}},
  doi          = {{10.1016/j.jalgebra.2026.02.025}},
  year         = {{2026}},
}

@article{64916,
  abstract     = {{The joining of dissimilar materials, such as steel and aluminum, entails significant challenges during thermal curing processes due to differing coefficients of thermal expansion. This study addresses the formation of “viscous fingering” instabilities in structural adhesive joints, which are induced by thermally driven relative displacements during the liquid phase of the adhesive. Using a component-like specimen “bridge specimen,” the dependency of this phenomenon on process temperature and structural stiffness (rivet distance) was characterized. Experimental results reveal that while the relative displacement scales cubically with the free buckling length, the resulting adhesive area reduction follows an exponential trend, leading to a loss of effective bond area of up to 79%, which significantly compromises the joint strength in automotive applications. To predict these process-induced defects, a thermo-chemo-viscoelastic-viscoplastic adhesive model implemented in LS-DYNA was applied. The model combines curing kinetics, viscoelastic relaxation, and pressure-dependent plasticity and features a geometric damage parameter (D) that captures the adhesive area reduction caused by viscous fingering as an exponential function of the accumulated normal strain in the liquid phase. This damage parameter, calibrated on base-specimen level, was transferred to the component geometry. The simulation demonstrated high predictive accuracy with a maximum deviation of the adhesive area reduction of 3.1% compared to experimental data. This validates the model’s capability to predict manufacturing-induced damage in complex hybrid structures solely based on thermal boundary conditions.}},
  author       = {{Al Trjman, Mohamad and Beule, Felix and Teutenberg, Dominik and Meschut, Gerson and Riese, Julia}},
  issn         = {{0021-8464}},
  journal      = {{The Journal of Adhesion}},
  keywords     = {{Adhesive area reduction, CED coating process, delta alpha problem, epoxy structural adhesive, influence of manufacture, multi-material design, numerical simulation (FEM), relative displacements, viscous fingering (saffman-taylor-instability).}},
  pages        = {{1--24}},
  publisher    = {{Informa UK Limited}},
  title        = {{{Experimental characterization and numerical analysis of the influence of the CED coating process on viscous fingering formation in hybrid-jointed mixed structures}}},
  doi          = {{10.1080/00218464.2026.2644394}},
  year         = {{2026}},
}

@inbook{64945,
  author       = {{Mersch, Katharina Ulrike}},
  booktitle    = {{Konfessionen auf dem Prüfstand. Vom Nutzen und Nachteil eines Konzepts für die Vormoderne}},
  editor       = {{Badea, Andreea and Boute, Bruno and Emich, Birgit}},
  title        = {{{Religiöse Bewegungen, Häresien oder Konfessionen? Überlegungen zum analytischen Nutzen des Konfessionsbegriffs für das westliche Mittelalter}}},
  volume       = {{8}},
  year         = {{2026}},
}

@article{64944,
  author       = {{Mersch, Katharina Ulrike}},
  journal      = {{Mittelalter. Interdisziplinäre Forschung und Rezeptionsgeschichte, Beihefte}},
  title        = {{{‚The truth explodes‘. Excommunicates facing their opponents‘ false testimony and concealment}}},
  year         = {{2026}},
}

@inbook{64946,
  author       = {{Mersch, Katharina Ulrike}},
  booktitle    = {{Vor dem Bauernkrieg. Leitmotive spätmittelalterlicher Protestbewegungen bis 1525. Tagungsband des 4. internationalen Symposions, UNESCO Welterbe Kloster Lorsch, 26. bis 28. Oktober 2023}},
  editor       = {{Mauntel, Christoph and Roth, Thomas and Schenk, Gerrit Jasper}},
  title        = {{{Messianisch, antiklerikal, protoreformatorisch? Gewalt gegen Kleriker und Kirchen in Tumulten des 14. Jahrhunderts}}},
  year         = {{2026}},
}

@inbook{64948,
  author       = {{Mersch, Katharina Ulrike}},
  booktitle    = {{Die Absicht der anderen. Zur sozialen Wirksamkeit von Intentionszuschreibungen im europäischen Mittelalter}},
  editor       = {{de Boer, Jan-Hendryk and Bubert, Marcel}},
  title        = {{{Gut gemeint ist nicht immer gut gemacht? Beweggründe von Menschenmengen bei der Verfolgung von Häretikern}}},
  year         = {{2026}},
}

@inbook{64950,
  author       = {{Mersch, Katharina Ulrike and Bruhn, Stephan}},
  booktitle    = {{Die Absicht der anderen. Zur sozialen Wirksamkeit von Intentionszuschreibungen im europäischen Mittelalter}},
  editor       = {{de Boer, Jan-Hendryk and Bubert, Marcel}},
  title        = {{{Was Frauen (nicht) wollen – misogyne Perspektiven auf Konflikte um Klosterreformen}}},
  year         = {{2026}},
}

@inbook{64949,
  author       = {{Mersch, Katharina Ulrike}},
  booktitle    = {{Die Absicht der anderen. Zur sozialen Wirksamkeit von Intentionszuschreibungen im europäischen Mittelalter}},
  editor       = {{de Boer, Jan-Hendryk and Bubert, Marcel}},
  title        = {{{Absichten in Gerichtsprozessen}}},
  year         = {{2026}},
}