@inproceedings{65006,
  author       = {{Knaup, Felix and Brüning, Florian and Schöppner, Volker}},
  booktitle    = {{Technomer 2025 29. Fachtagung}},
  isbn         = {{978-3-939382-17-1}},
  keywords     = {{Aufschmelzen, Aufschmelzmodellierung, Feststoffbett, melting modeling}},
  title        = {{{Bestimmung der Feststoffbettfestigkeit zur Vorhersage von Feststoffbettbrüchen im Einschneckenextruder}}},
  year         = {{2025}},
}

@inproceedings{65003,
  author       = {{Kleinschmidt, Dennis and Schöppner, Volker}},
  booktitle    = {{RubberCon 2025}},
  editor       = {{Gummitekniska Förening, Sveriges}},
  keywords     = {{Kautschuk, Rheologie, Wandgleiten}},
  title        = {{{Characterization of the wall slip behavior of filled rubber compounds considering the critical wall shear stress}}},
  year         = {{2025}},
}

@inproceedings{65009,
  author       = {{Schmidt, Leon and Schöppner, Volker and Brüning, Florian}},
  booktitle    = {{RubberCon 2025}},
  editor       = {{Gummitekniska Förening, Sveriges and Swedish, Norwegian and Finnish rubber associations}},
  keywords     = {{extrusion, Kautschuk, Simulation}},
  title        = {{{Findings on pinless screw design for rubber extrusion}}},
  year         = {{2025}},
}

@article{65008,
  author       = {{Schmidt, Leon and Brüning, Florian}},
  journal      = {{KGK - Kautschuk Gummi Kunststoffe}},
  keywords     = {{extrusion, Kautschuk}},
  number       = {{2/25}},
  pages        = {{34–40}},
  title        = {{{Investigation of alternative pinless screw concepts for rubber extrusion}}},
  volume       = {{78. Jahrgang}},
  year         = {{2025}},
}

@article{65000,
  author       = {{Hanselle, Felix Paul and Schöppner, Volker and Brüning, Florian}},
  journal      = {{International Polymer Processing}},
  keywords     = {{Druckabhängigkeit, Rheologie, Simulation, Spritzgießen, Viskosität}},
  title        = {{{Consideration of modeled pressure dependent viscosity data in injection molding simulation}}},
  doi          = {{10.1515/ipp-2025-0074}},
  year         = {{2025}},
}

@article{65002,
  author       = {{Kleinschmidt, Dennis and Brüning, Florian}},
  journal      = {{KGK Kautschuk Gummi Kunststoffe}},
  keywords     = {{Rheologie, Viskosität, Wandgleiten}},
  title        = {{{Influence of pre-shearing on the rheological properties of filled rubber compounds}}},
  year         = {{2025}},
}

@inproceedings{65046,
  author       = {{Kleinschmidt, Dennis}},
  booktitle    = {{Extrusion - Grundlagen und Praxis}},
  title        = {{{Beschreibung des Mischverhaltens von Kautschukstiftextrudern mittels simulativer und experimenteller Methoden}}},
  year         = {{2025}},
}

@inproceedings{65045,
  author       = {{Petzke, Jonas Dirk Rudolf Helmut}},
  booktitle    = {{AZuR-Kolloquium 2025}},
  title        = {{{Analyse des thermo-chemischen Devulkanisationsverhaltens von SBR-basierten GTR-Mischungen}}},
  year         = {{2025}},
}

@inproceedings{65042,
  author       = {{Hanselle, Felix Paul}},
  title        = {{{Improvement of injection molding simulations by application of modeled pressure dependent viscosity data}}},
  year         = {{2025}},
}

@article{65049,
  abstract     = {{<jats:p>The degradation of polypropylene (PP) through thermal and mechanical stress, as well as the influence of oxygen, are unavoidable when processing on a co-rotating twin-screw extruder. In previous studies, a mathematical model was developed to predict the degradation while compounding on different twin-screw extruder sizes. Additionally, the examination of filled PPs was conducted. To this end, a range of operating parameters and extruder sizes were used to process PP, and the molar mass was then determined by melt flow rate (MFR) and gel permeation chromatography (GPC) measurements to derive the degree of degradation. The model was then modified by adjusting the sensitivity parameters to allow the degradation behavior of the PPs to be described independently of extruder size. Consistent with prior research, comprehensive measurements of a PP/titanium dioxide (TiO2) compound revealed that, with a few exceptions, increasing temperatures and screw speeds and decreasing throughputs generally resulted in higher degradation. However, the application of the model to the compounds did not achieve good agreement with the measured degradation, indicating different degradation conditions due to the different thermodynamic and rheological properties of the compounds.</jats:p>}},
  author       = {{Albrecht, Paul and Altepeter, Matthias and Brüning, Florian}},
  issn         = {{2073-4360}},
  journal      = {{Polymers}},
  number       = {{11}},
  publisher    = {{MDPI AG}},
  title        = {{{Degradation of Polypropylene and Polypropylene Compounds on Co-Rotating Twin-Screw Extruders}}},
  doi          = {{10.3390/polym17111509}},
  volume       = {{17}},
  year         = {{2025}},
}

@inproceedings{63462,
  author       = {{Moritzer, Elmar and Bartmann, Finn and Riedl, Alexander}},
  booktitle    = {{Proceedings of the ASME 2025 Pressure Vessels & Piping Conference PVP2025}},
  location     = {{Montreal, Quebec, Canada}},
  title        = {{{NUMERICAL AND EXPERIMENTAL CONSIDERATIONS OF THE CREEP OF THERMOPLASTIC FLANGE SYSTEMS FOR THE DEVELOPMENT OF AN ANALYTICAL CALCULATION METHOD}}},
  year         = {{2025}},
}

@inproceedings{65048,
  author       = {{Salm, Maximilian Karl Franz and Moritzer, Elmar}},
  booktitle    = {{Technomer 2025 29. Fachtagung}},
  isbn         = {{978-3-939382-17-1}},
  keywords     = {{Additive Fertigung, Elektrische Leitfähigkeit, Compounds, TPE, Fused Filament Fabrication}},
  title        = {{{Einfluss von FFF-Prozessparametern auf die elektrische Leitfähigkeit von leitfähigen TPE-Komposite}}},
  year         = {{2025}},
}

@inproceedings{65047,
  author       = {{Beutelspacher, Jonas and Scharwald, David and Moritzer, Elmar}},
  booktitle    = {{Technomer 2025 29. Fachtagung}},
  isbn         = {{978-3-939382-17-1}},
  title        = {{{Einfluss der Schichtstruktur auf die Druckfestigkeit von FDM-Bauteilen – Ein konzeptioneller Ansatz}}},
  year         = {{2025}},
}

@article{65057,
  author       = {{Lobner, Laura and Meyer-Hamme, Johannes and Schönhärl, Korinna}},
  journal      = {{Geschichte in Wissenschaft und Unterricht}},
  number       = {{76, H. 9/10}},
  pages        = {{555--571}},
  title        = {{{Drei Spielfilme über die Wannseekonferenz als Anlass historischen Lernens}}},
  year         = {{2025}},
}

@article{64772,
  abstract     = {{<jats:p>Der Beitrag präsentiert Ergebnisse eines Lehr- und Forschungsprojekts, das den studentischen Umgang mit Literatur untersucht. Konkret wurden Studierende gebeten, sich einen disziplinspezifischen Text mithilfe generativer KI zu erschließen. Gefasst als Lehr-Lernpraktik, eröffnet die Analyse der Literaturarbeit Einblicke in hochschulische Praktiken und deren Transformation. Der Zugang erweist sich als erkenntnisreich, da er einerseits die zunehmende KI-Nutzung berücksichtigt, andererseits – aufgrund der dialogischen Funktionsweise generativer KI – Einblicke in die studentische Literaturarbeit ermöglicht. Zur Untersuchung der Praktiken und deren Sinngehalt wurden Chatprotokolle in Anlehnung an konversationsanalytische Verfahren ausgewertet, um studentische Handlungsmuster zu rekonstruieren. (DIPF/Orig.)</jats:p>}},
  author       = {{Kückmann, Marie-Ann and Schmid, Leonie}},
  isbn         = {{9783781527263}},
  journal      = {{Journal für Allgemeine Didaktik JfAD Jg.13/2025 Allgemeine Didaktik und Künstliche Intelligenu (KI)}},
  publisher    = {{Verlag Julius Klinkhardt}},
  title        = {{{Zum Umgang mit "Wahr-Scheinlichkeiten". Lehr- und Forschungsprojekt zur KI-gestützten Literaturarbeit}}},
  doi          = {{10.35468/jfad-13-2025-03}},
  year         = {{2025}},
}

@inproceedings{62877,
  author       = {{Sänger, Niklas and Schmid, Leonie and Jenert, Tobias and Kremer, H.-Hugo and Kückmann, Marie-Ann}},
  location     = {{Darmstadt}},
  title        = {{{Evaluation von Entwicklungsarbeiten zur modulübergreifenden Professionalisierung von Lehrkräften an Berufskollegs im Kontext der digitalen Transformation}}},
  year         = {{2025}},
}

@article{63470,
  author       = {{Wiredu, Laura}},
  journal      = {{Junior Management Science}},
  number       = {{4}},
  pages        = {{985--1008}},
  title        = {{{Who Bears the Costs of the UK Soft Drink Tax? An Empirical Study of Medium-Term Effects}}},
  doi          = {{10.582/jums/v10i4pp985-1008}},
  volume       = {{10}},
  year         = {{2025}},
}

@inproceedings{59897,
  abstract     = {{<jats:p>This paper discusses the influence of joint orientation with non-rotationally symmetric geometry, on load distribution and structural behavior. The focus is on understanding how changes in the alignment of individual joints affect the distribution of load, neighboring joints, and the overall performance of the component. Lap shear specimens with multiple joints arranged in a line are analyzed to explore these effects. Simplified models are used to model the joints in finite element simulations, allowing for efficient yet accurate analysis of the load distribution and structural response under varying joint orientations. Variations in joint orientation result in measurable changes in the distribution of forces on adjacent joints, influencing their behavior and that of the overall assembly. Experimental validation confirms the numerical results, providing deeper insights into the interaction between individual joints and their surroundings. This work contributes to the development of systematic approaches for optimizing the design of components with non-rotationally symmetric joints. The study highlights the importance of considering directional properties of joints in designing structural components.</jats:p>}},
  author       = {{Devulapally, Deekshith Reddy and Steinfelder, Christian and Tröster, Thomas and Brosius, Alexander}},
  booktitle    = {{MATEC Web of Conferences}},
  issn         = {{2261-236X}},
  location     = {{Lisabon,Portugal}},
  publisher    = {{EDP Sciences}},
  title        = {{{Impact of non-rotationally symmetric joint orientation on neighbouring joints and component performance in lap shear specimens}}},
  doi          = {{10.1051/matecconf/202540801035}},
  volume       = {{408}},
  year         = {{2025}},
}

@book{65062,
  author       = {{Tröster, Thomas and Marten, Thorsten and Luig, Simon}},
  isbn         = {{978-3-96780-214-6}},
  publisher    = {{Forschungsvereinigung Stahlanwendung e.V. (FOSTA)}},
  title        = {{{Methodische Auswahl hochfester Mehrphasenstähle bezüglich ihrer lokalen und globalen Duktilität}}},
  volume       = {{P 1447}},
  year         = {{2025}},
}

@article{61107,
  abstract     = {{<jats:p>As global industries seek to reduce energy consumption and lower CO2 emissions, the need for sustainable, efficient maintenance processes in manufacturing has become increasingly important. Traditional mold cleaning methods often require complete tool disassembly, extended downtime, and heavy use of solvents, resulting in high energy costs and environmental impact. This study presents a novel localized ultrasonic cleaning process for injection molding tools that enables targeted, in situ cleaning of mold cavities without removing the tool from the press. A precisely positioned ultrasonic transducer delivers cleaning energy directly to contaminated areas, eliminating the need for complete mold removal. Multiple cleaning agents, including alkaline and organic acid solutions, were evaluated for their effectiveness in combination with ultrasonic excitation. Surface roughness measurements were used to assess cleaning performance over repeated contamination and cleaning cycles. Although initial tests were performed manually in the lab, results indicate that the method can be scaled up and automated effectively. This process offers a promising path toward energy-efficient, low-emission tool maintenance across a wide range of injection molding applications.</jats:p>}},
  author       = {{Chalicheemalapalli Jayasankar, Deviprasad and Tröster, Thomas and Marten, Thorsten}},
  issn         = {{2227-7080}},
  journal      = {{Technologies}},
  number       = {{8}},
  publisher    = {{MDPI AG}},
  title        = {{{Localized Ultrasonic Cleaning for Injection Mold Cavities: A Scalable In Situ Process with Surface Quality Monitoring}}},
  doi          = {{10.3390/technologies13080354}},
  volume       = {{13}},
  year         = {{2025}},
}