@inproceedings{58382,
  author       = {{Striewe, Marius and Bähr, Philipp and Meschut, Gerson and Hein, David and Sommer, Silke}},
  booktitle    = {{14. Kolloquium: Gemeinsame Forschung in der Mechanischen Fügetechnik}},
  title        = {{{Ersatzmodellentwicklung zur Berücksichtigung der lokalen Fügeelementkinematik in mechanisch gefügten Verbindungen für die Bauteilauslegung im stahlintensiven Karosseriebau}}},
  year         = {{2024}},
}

@inbook{58386,
  author       = {{Gabriel, Katharina}},
  booktitle    = {{Der Neue Weltengarten. Jahrbuch für Literatur und Interkulturalität}},
  editor       = {{Böker, Ines and Hofmann, Michael and Schulte Eickholt, Swen}},
  isbn         = {{978-3-98859-096-1}},
  publisher    = {{Wehrhahn Verlag}},
  title        = {{{"Fremdsein ist ein Projekt geworden, durch das ich produktiv werde." Zum Verhältnis von Schreiben und Traumabewältigung in Abbas Khiders ‚Der falsche Inder‘}}},
  year         = {{2024}},
}

@inbook{58389,
  author       = {{Daniel-Söltenfuß, Desiree and Kremer, H.-Hugo and Kückmann, Marie-Ann}},
  booktitle    = {{Jahrbuch der berufs- und wirtschaftspädagogischen Forschung 2024}},
  title        = {{{Go with the flow?! Transferverständnisse und -strategien als Grundlage der Gestaltung von Transferprozessen im Kontext des InnoVET-Programms}}},
  year         = {{2024}},
}

@inproceedings{58391,
  author       = {{Werth, Gerda}},
  booktitle    = {{Beiträge zum Mathematikunterricht 2024}},
  location     = {{Essen}},
  pages        = {{1505--1508}},
  title        = {{{Der Einzug der Mathematik in die Bildungspläne der höheren Mädchenschulen zu Beginn des 20. Jahrhunderts}}},
  doi          = {{https://doi.org/10.37626/GA9783959872782.0}},
  year         = {{2024}},
}

@article{56738,
  author       = {{Neuber, Nils and Kehne, Miriam}},
  journal      = {{Forum Kinder- und Jugendsport}},
  number       = {{2}},
  pages        = {{156--164}},
  title        = {{{Freude an Bewegung und Sport früh verankern - Perspektiven für die Entwicklung des Kinder- und Jugendsports. Ergebnisse einer vom Bundesministerium des Innern und für Heimat beauftragten Arbeitsgruppe von Expert*innen und daraus abgeleitete Empfehlungen}}},
  doi          = {{10.1007/s43594-024-00138-y}},
  volume       = {{5}},
  year         = {{2024}},
}

@article{58396,
  author       = {{Hälterlein, Jens and Weber, Jutta}},
  journal      = {{FIfF Kommunikation - Zeitschrift für Informatik und Gesellschaft}},
  number       = {{4}},
  pages        = {{35--38}},
  title        = {{{Ethische KI im Krieg? Zu den Grenzen einer Responsible AI in the Military Domain}}},
  volume       = {{41}},
  year         = {{2024}},
}

@misc{58401,
  author       = {{Hälterlein, Jens}},
  booktitle    = {{TELEPOLIS}},
  title        = {{{KI im Krieg: Wenn Algorithmen über Leben und Tod entscheiden}}},
  year         = {{2024}},
}

@book{58403,
  author       = {{Mayer, Bernd and Nagel, Christof and Fernandes, Pedro Henrique Evangelista and Matzenmiller, Anton and Köster, Christian and Melz, Tobias and Baumgartner, Jörg and Hecht, Matthias and Tews, Karina and Çavdar, Serkan and Meschut, Gerson}},
  publisher    = {{Forschungsvereinigung Stahlanwendung e.V.}},
  title        = {{{Lebensdauerprognose für Stahlklebverbindungen bei multiaxialer Belastung mit Phasenverschiebung, veränderlicher Mittelspannung und variablen Amplituden}}},
  volume       = {{1427}},
  year         = {{2024}},
}

@inproceedings{48423,
  author       = {{Humpert, Lynn and Mundt, Enrik and Bretz, Lukas and Bernz, Vanessa and Anacker, Harald and Dumitrescu, Roman}},
  booktitle    = {{8th International Conference on Information Systems Engineering}},
  location     = {{Bangkok, Thailand}},
  title        = {{{Criteria-based comparison of Systems Engineering and agile methods}}},
  year         = {{2024}},
}

@inproceedings{52216,
  author       = {{Tews, Karina and Teutenberg, Dominik and Meschut, Gerson}},
  booktitle    = {{DECHEMA Workshop für Klebstoffanwender: Simulation von Klebverbindungen}},
  location     = {{Köln}},
  title        = {{{Mechanisches Verhalten: Charakterisierung von Klebstoffen}}},
  year         = {{2024}},
}

@article{58405,
  abstract     = {{<jats:title>Abstract</jats:title><jats:p>Process mining is advancing as a powerful tool for revealing valuable insights about process dynamics. Nevertheless, the imperative to employ process mining to enhance process transparency is a prevailing concern for organizations. Despite the widespread desire to integrate process mining as a pivotal catalyst for fostering a more agile and flexible Business Process Management (BPM) environment, many organizations face challenges in achieving widespread implementation and adoption due to deficiencies in various dimensions of process mining readiness. The current Information Systems (IS) knowledge base lacks a comprehensive framework to aid organizations in augmenting their process mining readiness and bridging this intention-action gap. The paper presents a Process Mining Maturity Model (P3M), refined through multiple iterations, which outlines five factors and 23 elements that organizations must address to increase their process mining readiness. The maturity model advances the understanding of how to close the intention-action gap of process mining initiatives in multiple dimensions. Furthermore, insights from a comprehensive analysis of data gathered in eleven qualitative interviews are drawn, elucidating 30 possible actions that organizations can implement to establish a more responsive and dynamic BPM environment by means of process mining.</jats:p>}},
  author       = {{Brock, Jonathan and Brennig, Katharina and Löhr, Bernd and Bartelheimer, Christian and von Enzberg, Sebastian and Dumitrescu, Roman}},
  issn         = {{2363-7005}},
  journal      = {{Business &amp; Information Systems Engineering}},
  number       = {{5}},
  pages        = {{585--605}},
  publisher    = {{Springer Science and Business Media LLC}},
  title        = {{{Improving Process Mining Maturity – From Intentions to Actions}}},
  doi          = {{10.1007/s12599-024-00882-7}},
  volume       = {{66}},
  year         = {{2024}},
}

@article{55762,
  abstract     = {{The corrosion behavior of a hybrid laminate consisting of laser-structured aluminum EN AW-6082 ∪ carbon fiber-reinforced polymer was investigated. Specimens were corroded in aqueous NaCl electrolyte (0.1 mol/L) over a period of up to 31 days and characterized continuously by means of scanning electron and light microscopy, supplemented by energy dispersive X-ray spectroscopy. Comparative linear sweep voltammetry was employed on the first and seventh day of the corrosion experiment. The influence of different laser morphologies and production process parameters on corrosion behavior was compared. The corrosion reaction mainly arises from the aluminum component and shows distinct differences in long-term corrosion morphology between pure EN AW-6082 and the hybrid laminate. Compared to short-term investigations, a strong influence of galvanic corrosion on the interface is assumed. No distinct influences of different laser structuring and process parameters on the corrosion behavior were detected. Weight measurements suggest a continuous loss of mass attributed to the detachment of corrosion products.</jats:p>}},
  author       = {{Delp, Alexander and Wu, Shuang and Freund, Jonathan and Scholz, Ronja and Löbbecke, Miriam and Tröster, Thomas and Haubrich, Jan and Walther, Frank}},
  issn         = {{1996-1944}},
  journal      = {{Materials}},
  number       = {{8}},
  publisher    = {{MDPI AG}},
  title        = {{{Characterization of Interfacial Corrosion Behavior of Hybrid Laminate EN AW-6082 ∪ CFRP}}},
  doi          = {{10.3390/ma17081907}},
  volume       = {{17}},
  year         = {{2024}},
}

@inproceedings{58410,
  author       = {{Disselkamp, Jan-Philipp and Kürpick, Christian and Schütte, Ben and Hovemann, Aschot and Dumitrescu, Roman}},
  booktitle    = {{Proceedings of NordDesign 2024}},
  editor       = {{ Malmqvist, J. and Candi, M. and Saemundsson, R. J. and Bystrom, F. and Isaksson, O.}},
  isbn         = {{978-1-912254-21-7}},
  location     = {{Reykjavik, Iceland }},
  title        = {{{Use Cases of Generative AI In Factory Planning: Potential and Challenges}}},
  year         = {{2024}},
}

@article{58406,
  author       = {{Brock, Jonathan and Enzberg, Sebastian von and Kühn, Arno and Dumitrescu, Roman}},
  issn         = {{2212-8271}},
  journal      = {{Procedia CIRP}},
  pages        = {{268--273}},
  publisher    = {{Elsevier BV}},
  title        = {{{Towards business use cases of process mining in product development and manufacturing: Deriving and classifying 18 application scenarios in industry}}},
  doi          = {{10.1016/j.procir.2024.06.022}},
  volume       = {{128}},
  year         = {{2024}},
}

@article{58407,
  author       = {{Lick, Jonas and Disselkamp, Jan-Philipp and Kattenstroth, Fiona and Trienens, Malte and Rasor, Rik and Kühn, Arno and Dumitrescu, Roman}},
  issn         = {{2212-8271}},
  journal      = {{Procedia CIRP}},
  pages        = {{603--608}},
  publisher    = {{Elsevier BV}},
  title        = {{{Digital Factory Twin: A Practioner-Driven Approach for Integrated Planning of the Enterprise Architecture}}},
  doi          = {{10.1016/j.procir.2024.03.038}},
  volume       = {{128}},
  year         = {{2024}},
}

@article{58409,
  author       = {{Kattenstroth, Fiona and Disselkamp, Jan-Philipp and Lick, Jonas and Dumitrescu, Roman}},
  issn         = {{2212-8271}},
  journal      = {{Procedia CIRP}},
  pages        = {{442--447}},
  publisher    = {{Elsevier BV}},
  title        = {{{Challenges in the implementation of simulation models for the digital factory twin - a systematic literature review}}},
  doi          = {{10.1016/j.procir.2024.07.052}},
  volume       = {{128}},
  year         = {{2024}},
}

@article{58408,
  author       = {{Beibl, Julia and Disselkamp, Jan-Philipp and Dumitrescu, Roman and Krause, Dieter}},
  issn         = {{2212-8271}},
  journal      = {{Procedia CIRP}},
  pages        = {{204--209}},
  publisher    = {{Elsevier BV}},
  title        = {{{Product and production design - Rethinking views on flexibility}}},
  doi          = {{10.1016/j.procir.2024.03.010}},
  volume       = {{128}},
  year         = {{2024}},
}

@article{58413,
  abstract     = {{<jats:p>Start-ups have become a pillar of EC' open innovation initiatives. With the aim of accessing start-up innovation, established companies (EC) use various corporate venturing modes. However, as established corporate venturing modes (e.g. corporate venture capital or accelerators) do not provide direct access to start-up innovation, the venture client model (VCLM) is receiving increasing attention in corporate practice. In the VCLM, ECs become paying customers of start-ups without taking equity - they become venture clients. In joint pilot projects, they apply start-up solutions to their products, processes or business models in order to solve relevant business problems and create strategic impact for increased competitiveness. The literature lists different EC using the VCLM such as BMW, Bosch, Continental, Daimler, Siemens, or ZF. This suggests that the VCLM is only used in EC with tens of thousands of employees, from Germany and in technology-intensive sectors such as automotive, mechanical engineering or telecommunications. On the other hand, GIMMY describes the suitability of the VCLM for any EC. However, in order to develop practical solutions to the challenges of the VCLM (e.g. slow purchasing, legal and IT processes or lack of acceptance of start-ups as collaboration partners), it is necessary to know the users (type of EC) of these solutions. Therefore, the aim of this paper is to characterize the EC using the VCLM with respect to industry, size and regionality.</jats:p>}},
  author       = {{Haarmann, Lennard and Jobelius, Johannes J. and Machon, Fabian and Rabe, Martin and Kühn, Arno and Dumitrescu, Roman}},
  issn         = {{2049-1069}},
  journal      = {{European Conference on Innovation and Entrepreneurship}},
  number       = {{1}},
  pages        = {{225--235}},
  publisher    = {{Academic Conferences International Ltd}},
  title        = {{{Venture Clienting in Corporate Practice: What type of Established Companies are Using the Venture Client Model?}}},
  doi          = {{10.34190/ecie.19.1.2634}},
  volume       = {{19}},
  year         = {{2024}},
}

@inproceedings{58411,
  author       = {{Disselkamp, Jan-Philipp and Seidenberg, Tobias and Lick, Jonas and Ptock, Lukas and Hovemann, Aschot and Dumitrescu, Roman}},
  booktitle    = {{Proceedings of NordDesign 2024}},
  editor       = {{Malmqvist, J. and Candi, M. and Saemundsson, R. J. and Isaksson, O.}},
  location     = {{Reykjavik, Iceland}},
  pages        = {{236--245}},
  title        = {{{Engineering Genetics - Towards the Double Helix Model for Integrative Product and Production Design}}},
  year         = {{2024}},
}

@inproceedings{58412,
  author       = {{Wilke, Daria and Bremer, Christian and Disselkamp, Jan-Philipp and Dumitrescu, Roman}},
  booktitle    = {{Proceedings of NordDesign 2024}},
  publisher    = {{The Design Society}},
  title        = {{{Model-Based Handling of Variability in Offer Management in Mechanical and Plant Engineering}}},
  doi          = {{10.35199/norddesign2024.35}},
  year         = {{2024}},
}