@unpublished{47447,
  abstract     = {{Sodium-ion capacitors (SICs) have great potential in energy storage due to their low cost, the abundance of Na, and the potential to deliver high energy and power simultaneously. This paper demonstrates a template-assisted method to induce graphitic nanodomains and micro-mesopores into nitrogen-doped carbons. This study elucidates that these graphitic nanodomains are beneficial for Na+ storage. The obtained N-doped carbon (As8Mg) electrode achieved a reversible capacity of 254 mA h g−1 at 0.1 A g−1. Moreover, the As8Mg-based SIC device achieves high combinations of power/energy densities (52 W kg−1 at 204 Wh kg−1 and 10,456 W kg−1 at 51 Wh kg−1) with outstanding cycle stability (99.7% retention over 10000 cycles at 0.2 A g−1). Our findings provide insights into optimizing carbon’s microstructure to boost sodium storage in the pseudo-capacitive mode. }},
  author       = {{Lopez Salas, Nieves and Li, Chun  and Song, Zihan and Liu, Minliang and Lepre, Enrico and Antonietti, Markus and Zhu, Junwu and Liu, Jian and Fu, Yongsheng}},
  keywords     = {{sodium ion capacitor, anode, template, N-doped carbons, graphitic nanodomains}},
  title        = {{{Template-induced graphitic nanodomains in nitrogen-doped carbons enable high-performance sodium-ion capacitors - ACCEPTED MANUSCRIPT}}},
  year         = {{2023}},
}

@article{42648,
  abstract     = {{In real photonic quantum systems losses are an unavoidable factor limiting the scalability to many modes and particles, restraining their application in fields as quantum information and communication. For this reason, a considerable amount of engineering effort has been taken in order to improve the quality of particle sources and system components. At the same time, data analysis and collection methods based on post-selection have been used to mitigate the effect of particle losses. This has allowed for investigating experimentally multi-particle evolutions where the observer lacks knowledge about the system's intermediate propagation states. Nonetheless, the fundamental question how losses affect the behaviour of the surviving subset of a multi-particle system has not been investigated so far. For this reason, here we study the impact of particle losses in a quantum walk of two photons reconstructing the output probability distributions for one photon conditioned on the loss of the other in a known mode and temporal step of our evolution network. We present the underlying theoretical scheme that we have devised in order to model controlled particle losses, we describe an experimental platform capable of implementing our theory in a time multiplexing encoding. In the end we show how localized particle losses change the output distributions without altering their asymptotic spreading properties. Finally we devise a quantum civilization problem, a two walker generalisation of single particle recurrence processes.}},
  author       = {{Pegoraro, Federico and Held, Philip and Barkhofen, Sonja and Brecht, Benjamin and Silberhorn, Christine}},
  issn         = {{0031-8949}},
  journal      = {{Physica Scripta}},
  number       = {{3}},
  publisher    = {{IOP Publishing}},
  title        = {{{Dynamic conditioning of two particle discrete-time quantum walks}}},
  doi          = {{10.1088/1402-4896/acbcaa}},
  volume       = {{98}},
  year         = {{2023}},
}

@techreport{49295,
  author       = {{Heinemann-Heile, Vanessa and Maiterth, Ralf and Sureth-Sloane, Caren}},
  title        = {{{Umfrage: Beurteilung Investitionsfördernder Maßnahmen durch Unternehmen aus Handel, Dienstleistung und Industrie}}},
  doi          = {{doi.org/10.52569/JCNY6589}},
  year         = {{2023}},
}

@misc{52427,
  author       = {{Schlüter, Alexander}},
  publisher    = {{Marcus Nettelbeck}},
  title        = {{{2050 - The Future Podcast, Folge The Energy Systems of the Future}}},
  year         = {{2023}},
}

@inproceedings{58793,
  author       = {{Wirth, Robert}},
  booktitle    = {{Aktuelle Politische Bildung im Englischunterricht: Mitdenken! Mitreden! Mitgestalten! }},
  title        = {{{Letting ‘someone else rule your land’? – the Scottish Quandary" / "Putting the ‘Great’ Back Into Great Britain}}},
  year         = {{2023}},
}

@inproceedings{58794,
  author       = {{Wirth, Robert}},
  booktitle    = {{Fachreferententagung}},
  title        = {{{Letting ‘someone else rule your land’? – the Scottish Quandary}}},
  year         = {{2023}},
}

@article{64893,
  abstract     = {{<jats:title>Abstract</jats:title><jats:p>The synthesis of three novel imidazolyl‐substituted sulfur‐containing heteroacenes is reported. These heteroacenes consisting of annelated benzo‐ and naphthothiophenes serve as precursors for the generation of open‐shell quinoid heteroacenes by oxidation with alkaline ferric cyanide. Spectroscopic and computational experiments support the formation of reactive open‐shell quinoids, which, however, quickly produce paramagnetic polymeric material.</jats:p>}},
  author       = {{Hou, Peng and Peschtrich, Sebastian and Feuerstein, Wolfram and Schoch, Roland and Hohloch, Stephan and Breher, Frank and Paradies, Jan}},
  issn         = {{2191-1363}},
  journal      = {{ChemistryOpen}},
  number       = {{11}},
  publisher    = {{Wiley}},
  title        = {{{Imidazolyl‐Substituted Benzo‐ and Naphthodithiophenes as Precursors for the Synthesis of Transient Open‐Shell Quinoids}}},
  doi          = {{10.1002/open.202300003}},
  volume       = {{12}},
  year         = {{2023}},
}

@article{45112,
  author       = {{Beverungen, Daniel and Kundisch, Dennis and Mirbabaie, Milad and Müller, Oliver and Schryen, Guido and Trang, Simon Thanh-Nam and Trier, Matthias}},
  journal      = {{Business & Information Systems Engineering}},
  number       = {{4}},
  pages        = {{463 -- 474}},
  title        = {{{Digital Responsibility – a Multilevel Framework for Responsible Digitalization}}},
  doi          = {{10.1007/s12599-023-00822-x}},
  volume       = {{65}},
  year         = {{2023}},
}

@article{48262,
  author       = {{Jacke, Christoph and Flath, Beate}},
  journal      = {{Kulturpolitische Mitteilungen}},
  number       = {{Nr. III/2023}},
  pages        = {{84--85}},
  title        = {{{Popmusik- und Medienkulturen verstehen, erforschen und reflektieren. Studiengang "Populäre Musik und Medien" und Gründung des Forschungszentrums "C:POP".}}},
  volume       = {{182}},
  year         = {{2023}},
}

@inbook{64937,
  author       = {{Mersch, Katharina Ulrike}},
  booktitle    = {{A companion to the abbey of Quedlinburg in the Middle Ages}},
  editor       = {{Blough, Karen}},
  pages        = {{15--46}},
  title        = {{{Quedlinburg abbey’s medieval history in ever-changing political and religious frameworks: a survey}}},
  volume       = {{29}},
  year         = {{2023}},
}

@inbook{64938,
  author       = {{Mersch, Katharina Ulrike}},
  booktitle    = {{Women and monastic reform in the medieval west, c. 1000-1500. Debating identities, creating communities}},
  editor       = {{Hotchin, Julie and Thibaut, Jirki}},
  pages        = {{227--248}},
  title        = {{{Who made reform visible? Male and female agency in changing visual culture}}},
  volume       = {{44}},
  year         = {{2023}},
}

@inbook{64940,
  author       = {{Mersch, Katharina Ulrike}},
  booktitle    = {{1100 Jahre Quedlinburg. Einblicke in das Leben auf der Königspfalz}},
  editor       = {{Freund, Stephan}},
  pages        = {{41--64}},
  title        = {{{Pfalz und Stift Quedlinburg in Konflikten des 10. bis 12. Jahrhunderts}}},
  volume       = {{9}},
  year         = {{2023}},
}

@article{64939,
  author       = {{Mersch, Katharina Ulrike}},
  journal      = {{Religion and Urbanity Online}},
  title        = {{{Perforating urban boundaries with processions}}},
  doi          = {{10.1515/urbrel.23291899}},
  year         = {{2023}},
}

@misc{64976,
  author       = {{Mersch, Katharina Ulrike}},
  booktitle    = {{Rottenburger Jahrbuch für Kirchengeschichte}},
  pages        = {{350--351}},
  title        = {{{Jonathan Reinert, Volker Leppin (Hgg.): Kleriker und Laien. Verfestigung und Verflüssigung einer Grenze im Mittelalter (Spätmittelalter, Humanismus, Reformation / Studies in the Late Middle Ages, Humanism, and the Reformation 121). Tübingen: Mohr Siebeck 2021. VIII, 313 S. ISBN 978-3-16-160801-8. Leinen}}},
  volume       = {{42}},
  year         = {{2023}},
}

@misc{64973,
  author       = {{Mersch, Katharina Ulrike}},
  booktitle    = {{Zeitschrift für Historische Forschung}},
  pages        = {{99--100}},
  title        = {{{Becher, Matthias / Achim Fischelmanns / Katharina Gahbler (Hrsg.), Vormoderne Macht und Herrschaft. Geschlechterdimensionen und Spannungsfelder (Macht und Herrschaft, 12), Göttingen 2021, V & R unipress / Bonn University Press}}},
  volume       = {{50}},
  year         = {{2023}},
}

@misc{64975,
  author       = {{Mersch, Katharina Ulrike}},
  booktitle    = {{Zeitschrift für Historische Forschung}},
  number       = {{3}},
  pages        = {{519--520}},
  title        = {{{Seabourne, Gwen, Women in the Medieval Common Law c. 1200-1500 (Studies in Medieval History and Culture), London / New York 2021, Routledge}}},
  volume       = {{50}},
  year         = {{2023}},
}

@misc{64972,
  author       = {{Mersch, Katharina Ulrike}},
  booktitle    = {{sehepunkte}},
  number       = {{1}},
  title        = {{{Felicity Hill: Excommunication in Thirteenth-Century England. Communities, Politics, and Publicity, Oxford University Press 2022}}},
  volume       = {{23}},
  year         = {{2023}},
}

@misc{64974,
  author       = {{Mersch, Katharina Ulrike}},
  booktitle    = {{Renaissance Quaterly}},
  number       = {{2}},
  pages        = {{645--646}},
  title        = {{{Die „Chronica de beato Brunone primo Cartusiensium“ Heinrich Arnoldis von Alfeld by Christoph Galle}}},
  volume       = {{76}},
  year         = {{2023}},
}

@inproceedings{47084,
  abstract     = {{Fused Deposition Modeling (FDM) is an additive manufacturing process to produce
complex thermoplastic geometries layer by layer. The filament is melted in a nozzle, iteratively
deposited, and then cools down. Due to the solidification process, the deposited filament strands
deviate from their intended position due to shrinkage, resulting in significant geometric deviations
in the final part. In terms of dimensional accuracy, there is a need for optimization, especially for
local curved geometries in relation to the global part with higher nominal dimensions. The aim of
this study is to investigate the size and shape deviations for cylindrical FDM elements and to
compensate the expected deformations by using an in-house software with adaptive scaling factors
in the x-y plane. Previous studies mainly focus on simple, non-curved objects, this study also
considers the influence of curvature and global as well as local deviations on the final part.}},
  author       = {{Koers, Thorsten and Magyar, Balázs}},
  booktitle    = {{Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium 2023}},
  editor       = {{Beaman, Joseph}},
  location     = {{Austin, Texas, USA}},
  title        = {{{Determination and Compensation of the Shrinkage Behavior of Cylindrical Elements in the FDM Process}}},
  doi          = {{https://doi.org/10.26153/tsw/50920}},
  volume       = {{34}},
  year         = {{2023}},
}

@inproceedings{48790,
  abstract     = {{To ensure uniform documentation of support structure information, a concept is presented that enables a standardized depiction of support structures in technical drawings based on ISO 128-3. To this end, requirements for a uniform depiction are defined and a procedure for drawing entry is presented. The drawing entry should contain all production-relevant support structure information. The standardized documentation of support structure information in technical drawings is intended to ensure a simple, clear and safe exchange of information between business units or different companies along the value chain. As a result a possible drawing entry of support structures was developed. To distinguish between different support structure types, a standardized depiction of geometrical information in a specification field is shown. The specification field gives a detailed description of the support structure type, the geometry as well as the connection to the part and the building platform. Also uncommon support types like lattice structures or CAD based support structures can be implemented. To ensure the usability the depictio is editable and extendable.}},
  author       = {{Lammers, Stefan and Koers, Thorsten and Magyar, Balázs and Zimmer, Detmar and Lieneke, Tobias}},
  booktitle    = {{Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium 2023}},
  editor       = {{Beaman, Joseph}},
  location     = {{Austin, Texas, USA}},
  title        = {{{Depiction of support structures in technical drawings}}},
  doi          = {{https://doi.org/10.26153/tsw/50982}},
  volume       = {{34}},
  year         = {{2023}},
}