@article{66791,
  abstract     = {{<jats:title>Abstract</jats:title>
                  <jats:p>Roller shells of twin-roll-caster (TRC) are subjected to wear and tear due to their usage in harsh casting and forming conditions. Therefore, their durability is significantly shortened by the need to refinish the surface to reinstate suitable surface parameters for rolling and casting thin aluminium or other metal strips. To extend the lifetime of the rollers, a solution to repair the surface has to be found. Due to the constraints in the TRC process, most surface repair processes are not suitable, too complex (multistage heat treatment) or too expensive. Hence, high velocity oxygen fuel (HVOF) is a viable solution for applying a repair surface onto worn-down rollers, as this process is well-known and understood, already established in the industry, and potentially possible to integrate into the TRC process environment without disassembling the roller from the machine.</jats:p>}},
  author       = {{Lauth, Martin and Hoyer, Kay-Peter and Voswinkel, Dietrich and Gräfen, Winfried and Schaper, Mirko}},
  issn         = {{2194-1831}},
  journal      = {{HTM Journal of Heat Treatment and Materials}},
  number       = {{4}},
  pages        = {{166--178}},
  publisher    = {{Walter de Gruyter GmbH}},
  title        = {{{Adapting the HVOF Process for the Repair of Twin-Roll-Caster Shells}}},
  doi          = {{10.1515/htm-2026-0017}},
  volume       = {{81}},
  year         = {{2026}},
}

@article{66790,
  abstract     = {{<jats:title>Abstract</jats:title>
                  <jats:p>Roller shells of twin-roll-caster (TRC) are subjected to wear and tear due to their usage in harsh casting and forming conditions. Therefore, their durability is significantly shortened by the need to refinish the surface to reinstate suitable surface parameters for rolling and casting thin aluminium or other metal strips. To extend the lifetime of the rollers, a solution to repair the surface has to be found. Due to the constraints in the TRC process, most surface repair processes are not suitable, too complex (multistage heat treatment) or too expensive. Hence, high velocity oxygen fuel (HVOF) is a viable solution for applying a repair surface onto worn-down rollers, as this process is well-known and understood, already established in the industry, and potentially possible to integrate into the TRC process environment without disassembling the roller from the machine.</jats:p>}},
  author       = {{Lauth, Martin and Hoyer, Kay-Peter and Voswinkel, Dietrich and Gräfen, Winfried and Schaper, Mirko}},
  issn         = {{2194-1831}},
  journal      = {{HTM Journal of Heat Treatment and Materials}},
  number       = {{4}},
  pages        = {{166--178}},
  publisher    = {{Walter de Gruyter GmbH}},
  title        = {{{Adapting the HVOF Process for the Repair of Twin-Roll-Caster Shells}}},
  doi          = {{10.1515/htm-2026-0017}},
  volume       = {{81}},
  year         = {{2026}},
}

@book{66621,
  editor       = {{Hartwich, Katharina and Heisler, Dietmar and Lippegaus, Petra and Schmökel, Michelle Jaquelina and Schwede, Jana and Sommer, Christian}},
  publisher    = {{bwp@ Berufs- und Wirtschaftspädagogik – online}},
  title        = {{{bwp@ Spezial HT2025: Nachhaltig – Digital – Chancengerecht. Zukunftsszenarien von Arbeit, Bildung und Beruf}}},
  year         = {{2026}},
}

@article{66788,
  author       = {{Hartwich, Katharina and Heisler, Dietmar}},
  issn         = {{1618-8543}},
  journal      = {{bwp@ Berufs- und Wirtschaftspädagogik – online}},
  number       = {{50}},
  title        = {{{Implementierung von Nachhaltigkeit in der Berufsvorbereitung –  Konzeptionelle und praxisbezogene Entwicklungen}}},
  year         = {{2026}},
}

@article{66650,
  author       = {{Sagolla, Nils and Seifert, Andreas and Bohndick, Carla and Buhl, Heike M.}},
  journal      = {{Journal for Educational Research Online}},
  number       = {{1}},
  pages        = {{31--48}},
  publisher    = {{Waxmann}},
  title        = {{{Skills Help, but They Don’t Help All at Once: Changes in the Relationship Between Study- Relevant Skills and Student Stress as Well as Study Satisfaction During the First Two Years of Teacher Education}}},
  doi          = {{10.31244/jero.2026.01.02}},
  volume       = {{18}},
  year         = {{2026}},
}

@inbook{66753,
  author       = {{Kaemper, Mara and Buhl, Heike M. and Klingsieck, Katrin B.}},
  booktitle    = {{Prokrastination: Erkennen, Verstehen, Reduzieren}},
  editor       = {{Klingsieck, Katrin B. and Koppenborg, Markus}},
  isbn         = {{9783662728994}},
  publisher    = {{Springer Berlin Heidelberg}},
  title        = {{{Verhaltensbezogene Prävention von Prokrastination: Das PROFI-Training}}},
  doi          = {{10.1007/978-3-662-72900-7_10}},
  year         = {{2026}},
}

@inproceedings{66517,
  abstract     = {{Models of Circular Economy introduce circularity strategies like reuse, repair or remanufacture. A significant level of complexity is added when these strategies are applied not only on integrated product level, but on lower levels of assemblies and parts. Therefore, approaches, like Design for Assembly, Disassembly and Reassembly (DfADR) become increasingly important including the consideration of ADR capabilities. To put DfADR into practice, it is necessary to structure ADR-related product data and make it usable for product engineers. For instance, assemblies resulting from disassembly might not be consistent with original assembly structures. Therefore, a Product Meta Data Model (MDM) is required to handle assembly-related data even when it has extreme characteristics. A literature review on related MDMs reveals a range of models for general product data and identifies a gap in consideration of assembly-related data. In an expert workshop, requirements are raised to evaluate existing models and develop ADR-related extensions. The MDM is conceptually modelled and validated by competence questions. The paper presents an approach that makes assembly-related data usable for hybrid decision support and enables engineers to think ahead of ADR processes.}},
  author       = {{Gräßler, Iris and Vollenkemper, Felix and Pottebaum, Jens}},
  booktitle    = {{1st International Symposium: March 24 – 26, 2026, Heinz Nixdorf Institute, Paderborn University}},
  editor       = {{Graessler, Iris}},
  location     = {{Paderborn}},
  publisher    = {{Universitätsbibliothek}},
  title        = {{{A product Meta Data Model of assembly-related extreme data to enable hybrid decision support}}},
  doi          = {{10.17619/UNIPB/1-2642}},
  year         = {{2026}},
}

@inproceedings{66832,
  author       = {{Tahir, Faiza and Ullah, Ubaid and Bodden, Eric}},
  booktitle    = {{Proceedings of the 21st International Conference on Software Technologies}},
  publisher    = {{SCITEPRESS - Science and Technology Publications}},
  title        = {{{Trustworthy AI: Operationalizing Responsibility in Lifecycle-Aware AI Threat Modeling through RACI}}},
  doi          = {{10.5220/0015000700004088}},
  year         = {{2026}},
}

@inproceedings{66833,
  author       = {{Kummita, Sriteja and Schiebel, Fabian Benedikt and Bodden, Eric and Miao, Miao and Wei, Shiyi}},
  booktitle    = {{2026 IEEE International Conference on Software Analysis, Evolution and Reengineering (SANER)}},
  publisher    = {{IEEE}},
  title        = {{{Static Analysis Traces can Help Dynamic Symbolic Execution: a Replication Study}}},
  doi          = {{10.1109/saner67736.2026.00114}},
  year         = {{2026}},
}

@inbook{66831,
  author       = {{Droß-Krüpe, Kerstin and Grömer, K.}},
  booktitle    = {{ A Cultural History of Craft in Antiquity}},
  editor       = {{Russell, B.}},
  pages        = {{85--111}},
  title        = {{{ Fibers, Textiles, and Dress}}},
  year         = {{2026}},
}

@book{66830,
  editor       = {{Droß-Krüpe, Kerstin and Ruffing, Kai}},
  title        = {{{rota – ratio – res publica. Gesammelte Schriften Helmuth Schneider II}}},
  volume       = {{195}},
  year         = {{2026}},
}

@inproceedings{66837,
  abstract     = {{Manufacturers operate under dynamic regulatory conditions, leading to frequently changing requirements that must be managed with high effort. AI-based requirements extraction using Large Language Models (LLMs) has the potential to support engineers in this task by analyzing large documents, for example. Existing evaluation approaches in AI-supported requirements engineering mainly assess individual requirements and their consistency with source documents, while quality criteria of requirements sets are largely neglected. This paper presents a five-step approach to evaluate the performance of current LLMs in generating requirements sets: a systematic literature review to identify quality criteria of requirements sets (1), exemplary generation of requirements sets from the Machinery Directive 2006/42/EC using LLMs (2), examination (3), evaluation (4) and comparison (5) of the generated requirements sets. The results support engineers in selecting LLMs for creating requirement sets and in evaluating future LLMs.}},
  author       = {{Gräßler, Iris and Pfeifer, Jan Niklas}},
  booktitle    = {{1st International Symposium: March 24 – 26, 2026, Heinz Nixdorf Institute, Paderborn University}},
  editor       = {{Graessler, Iris}},
  keywords     = {{Requirements Engineering, Artificial Intelligence, Large Language Models, Generative AI}},
  location     = {{Paderborn}},
  publisher    = {{Universitätsbibliothek}},
  title        = {{{Performance evaluation of large language models in extracting requirements sets from technical documents}}},
  doi          = {{10.17619/UNIPB/1-2646}},
  year         = {{2026}},
}

@article{66838,
  abstract     = {{The sliding square model is a widely used abstraction for studying self-reconfigurable robotic systems, where modules are square-shaped robots that move by sliding or rotating over one another. In this paper, we propose a novel distributed algorithm that enables a group of modules to reconfigure into a rhombus shape, starting from an arbitrary side-connected configuration. It is connectivity-preserving and operates under minimal assumptions: one leader module, common chirality, constant memory per module, and visibility and communication restricted to immediate neighbors. Unlike prior work, which relaxes the original sliding square move-set, our approach uses the unmodified move-set, addressing the additional challenge of handling locked configurations. Our algorithm is sequential in nature and operates with a worst-case time complexity of O(n^2) rounds, which is optimal for sequential algorithms. To improve runtime, we introduce two parallel variants of the algorithm. Both rely on a spanning tree data structure, allowing modules to make decisions based on local connectivity. Our experimental results show a significant speedup for the first variant, and a linear average runtime for the second variant, which is worst-case optimal for parallel algorithms.}},
  author       = {{Kostitsyna, Irina and Liedtke, David and Scheideler, Christian}},
  issn         = {{0304-3975}},
  journal      = {{Theoretical Computer Science}},
  keywords     = {{modular robots, distributed algorithms, sliding squares}},
  publisher    = {{Elsevier BV}},
  title        = {{{Distributed rhombus formation of sliding squares}}},
  doi          = {{10.1016/j.tcs.2026.116196}},
  volume       = {{1085}},
  year         = {{2026}},
}

@article{66840,
  author       = {{Danner, Christian and Lagarden, Martin  and Martini, Jan Thomas and Niemann, Rainer and Oestreicher, Andreas and Sassmann, Juliane and Schreiber, Ulrich and Simons, Dirk and Sureth-Sloane, Caren and Voeller, Dennis}},
  journal      = {{International Transfer Pricing Journal}},
  number       = {{5}},
  title        = {{{Mandatory Binding Arbitration – Economic Evaluation of an International Norm}}},
  doi          = {{10.59403/pmxpqx}},
  volume       = {{33}},
  year         = {{2026}},
}

@article{66839,
  author       = {{Koch, Reinald and Sureth-Sloane, Caren}},
  journal      = {{Der Betrieb}},
  number       = {{35}},
  pages        = {{2110--2177}},
  title        = {{{Steuern und Zölle als strategische Entscheidungsgrößen: Wirkungen auf Investitionen, Lieferketten und den Standort Deutschland}}},
  volume       = {{79}},
  year         = {{2026}},
}

@article{65894,
  abstract     = {{We examine the relation between voluntary audit and the cost of debt in private firms. We use a sample of 7420 small private firms operating in the period 2006-2022 that are not subject to mandatory audits. Firms self-select into voluntary audits because of the economic setting (e.g., ownership complexity, export, subsidiary status) or because firm fundamentals limit their access to financial debt. In the outcome analyses, we find that voluntary audits result in higher, rather than lower, interest rates with increases ranging from approximately 1.7 percentage points, but going higher depending on the exact specification. This effect is present regardless of the perceived audit quality (Big-4 vs. non-Big-4), consistent across auditor types. Audited firms’ earnings are less informative about future operating performance. Voluntary audits facilitate access to financial debt for high-risk firms. The price paid is reflected in higher interest rates for voluntary audits – firms with higher information/fundamental risk.}},
  author       = {{Ichev, Riste and Koren, Jernej and Kosi, Urska and Sitar Sustar, Katarina and Valentincic, Aljosa}},
  issn         = {{1059-0560}},
  journal      = {{International Review of Economics & Finance}},
  publisher    = {{Elsevier }},
  title        = {{{Cost of debt for private firms revisited: voluntary audits as a reflection of risk}}},
  doi          = {{10.1016/j.iref.2026.105474}},
  volume       = {{109}},
  year         = {{2026}},
}

@article{65860,
  abstract     = {{We investigate the role of stakeholders in the CSR reporting of non-listed savings banks in Germany. They are established by municipal trustees and serve clients in their distinct operating area. Reporting discretion under the Non-Financial Reporting Directive may lead to variation in CSR reporting due to differences in sustainability interests of banks’ stakeholders and CSR governance (e.g. existence of a CSR manager). We document that the CSR reports and specific CSR dimensions are intensely associated with the existence of strong CSR governance and to a lesser extent with the interests of municipal trustees and bank clients. However, the associations with these stakeholders are predominantly present in banks with strong CSR governance. Our findings inform policy discussions about detailed CSR disclosure requirements (e.g. the European Sustainability Reporting Standards) and extension of reporting scope to firms with regional orientation and absence of typical shareholders.}},
  author       = {{Gulenko, Maryna and Kohlhase, Saskia and Kosi, Urska}},
  issn         = {{1744-9480}},
  journal      = {{Accounting in Europe}},
  pages        = {{1--35}},
  publisher    = {{Informa UK Limited}},
  title        = {{{The Role of Stakeholders in CSR Reporting of Non-Listed Banks}}},
  doi          = {{10.1080/17449480.2026.2631702}},
  year         = {{2026}},
}

@inbook{66852,
  author       = {{Jenert, Tobias and Kremer, H.-Hugo and Kückmann, Marie-Ann and Sänger, Niklas and Schmid, Leonie Ulrike and Wilde, Stephanie and Groß, Dominik}},
  booktitle    = {{Professionelles Handeln in einer Kultur der Digitalität. Ergebnisse aus dem Kompetenzzentrum Sprachen/Gesellschaft/Wirtschaft.}},
  editor       = {{Scheiter, Katharina and Richter, Dirk and Brüggemann, Jörn and Jennek, Julia}},
  pages        = {{173--188}},
  publisher    = {{Waxmann}},
  title        = {{{Komplexität professionellen Lehrpersonenhandelns erfahrbarer(er) machen? Einblicke in die Konzeption, Durchführung und Evaluation eines reflexiven Begleitinstruments für Studierende im Rahmen des Projekts digiSAIL}}},
  doi          = {{https://doi.org/10.31244/9783818851668}},
  volume       = {{2}},
  year         = {{2026}},
}

@article{66854,
  abstract     = {{<jats:title>Abstract</jats:title>
                  <jats:p>Investigating the real-time interplay between language and vision has traditionally involved a trade-off between experimental control and interactive setups. To address this challenge, we present a methodological framework that embeds the visual world paradigm (VWP) within a continuous, goal-directed human–robot interaction (HRI) task. By augmenting VWP in an HRI setup to produce standardized yet responsive verbal and non-verbal behaviours, the framework makes it possible to selectively examine comprehension, production, actions and their relation to visual attention in real-time. We demonstrate the utility of the framework through a proof-of-concept manipulating action structure, specifically path and manner, as well as other-initiated repair formats, namely open and restricted requests. The findings show that the setup reliably captures time-locked referential gaze dynamics following comprehension and preceding production processes. They further indicate that differences in action history systematically influence speakers’ pre-verbal cognitive processes and their subsequent linguistic choices. These findings suggest that HRI can provide a useful methodological middle ground to investigate language processes online in a tightly controlled setup without disrupting the interaction. More broadly, the framework offers a test bed for examining whether established psycholinguistic findings extend to HRI setups. At the same time, it provides HRI researchers with an empirical basis for developing adaptive agents informed by online language-vision interaction theories.</jats:p>}},
  author       = {{Singh, Amit and Rohlfing, Katharina J.}},
  issn         = {{0090-6905}},
  journal      = {{Journal of Psycholinguistic Research}},
  number       = {{5}},
  publisher    = {{Springer Science and Business Media LLC}},
  title        = {{{A Methodological Framework for Studying Online Language–Vision Interplay in Human–Robot Interaction}}},
  doi          = {{10.1007/s10936-026-10296-z}},
  volume       = {{55}},
  year         = {{2026}},
}

@inbook{66856,
  abstract     = {{<jats:title>Abstract</jats:title>
                  <jats:p>Goals are central to human actions: In fact, human actions are organized toward goals. Already early in human development, human perception becomes biased to goal-directed actions. A characteristic of social interaction is that goals can be shared among involved agents. This is a great benefit for designing sXAI as it allows explanation goals to be collaboratively negotiated. Even more, depending on the goal, users could be dynamically but minimalistically supported in their autonomous actions. Future sXAI developments can benefit from this chapter by recognizing how essential goals are and that they constitute an intersection of individual actions and social ecologies.</jats:p>}},
  author       = {{Rohlfing, Katharina J. and Singh, Amit and Groß, André and Wrede, Britta}},
  booktitle    = {{Social Explainable AI}},
  isbn         = {{9789819652891}},
  publisher    = {{Springer Nature Singapore}},
  title        = {{{Explanation Goals}}},
  doi          = {{10.1007/978-981-96-5290-7_6}},
  year         = {{2026}},
}