@inbook{59942, author = {{Vukadinovic, Vojin Sasa}}, booktitle = {{Randgänge der Neuen Rechten. Philosophie, Minderheiten, Transnationalität}}, editor = {{Vukadinović, Vojin Saša}}, isbn = {{978-3-8376-5980-6}}, pages = {{129--149}}, publisher = {{transcript Verlag}}, title = {{{Monument des Degout. Wolfgang Gedeon als Heimphilosoph}}}, year = {{2022}}, } @article{59940, author = {{Vukadinovic, Vojin Sasa}}, journal = {{Zeitschrift für Politik}}, pages = {{180--200}}, publisher = {{Nomos Verlag}}, title = {{{Cancel-Culture-Skeptiker. Über die ideologischen Konturen eines Sozialphänomens und seine akademischen Folgen}}}, volume = {{Sonderband 10}}, year = {{2022}}, } @article{32088, abstract = {{Subwavelength dielectric resonators assembled into metasurfaces have become a versatile tool for miniaturizing optical components approaching the nanoscale. An important class of metasurface functionalities is associated with asymmetry in both the generation and transmission of light with respect to reversals of the positions of emitters and receivers. The nonlinear light–matter interaction in metasurfaces offers a promising pathway towards miniaturization of the asymmetric control of light. Here we demonstrate asymmetric parametric generation of light in nonlinear metasurfaces. We assemble dissimilar nonlinear dielectric resonators into translucent metasurfaces that produce images in the visible spectral range on being illuminated by infrared radiation. By design, the metasurfaces produce different and completely independent images for the reversed direction of illumination, that is, when the positions of the infrared emitter and the visible light receiver are exchanged. Nonlinearity-enabled asymmetric control of light by subwavelength resonators paves the way towards novel nanophotonic components via dense integration of large quantities of nonlinear resonators into compact metasurface designs.}}, author = {{Kruk, Sergey S. and Wang, Lei and Sain, Basudeb and Dong, Zhaogang and Yang, Joel and Zentgraf, Thomas and Kivshar, Yuri}}, issn = {{1749-4885}}, journal = {{Nature Photonics}}, keywords = {{Atomic and Molecular Physics, and Optics, Electronic, Optical and Magnetic Materials}}, pages = {{561–565}}, publisher = {{Springer Science and Business Media LLC}}, title = {{{Asymmetric parametric generation of images with nonlinear dielectric metasurfaces}}}, doi = {{10.1038/s41566-022-01018-7}}, volume = {{16}}, year = {{2022}}, } @article{60007, author = {{Engler, Daniel and Gutsche, Gunnar and Simixhiu, Amantia and Ziegler, Andreas}}, issn = {{0140-9883}}, journal = {{Energy Economics}}, publisher = {{Elsevier BV}}, title = {{{On the relationship between corporate CO2 offsetting and pro-environmental activities in small- and medium-sized firms in Germany}}}, doi = {{10.1016/j.eneco.2022.106487}}, volume = {{118}}, year = {{2022}}, } @inproceedings{47324, author = {{Berndt, Axel}}, booktitle = {{{Data Society. Chancen – Verantwortung – Innovationen}}}, title = {{{Musik vom Computer: Eine Entdeckungsreise in die Welt der generativen Musik}}}, year = {{2022}}, } @inproceedings{47323, author = {{Berndt, Axel}}, booktitle = {{Forschungskolloquium}}, title = {{{Modellbasierte Beschreibung musikalischer Interpretationen}}}, year = {{2022}}, } @inproceedings{47325, author = {{Berndt, Axel}}, booktitle = {{{Edirom Summer School 2022}}}, title = {{{Music Performance Markup (MPM): Einführung in die Beschreibung musikalischer Interpretationen}}}, year = {{2022}}, } @inproceedings{47328, author = {{Berndt, Axel}}, booktitle = {{{Music Encoding Conference}}}, pages = {{167–169}}, title = {{{Encoding Musical Performances}}}, year = {{2022}}, } @inbook{47326, author = {{Berndt, Axel}}, booktitle = {{{Der Tag ist nicht mehr fern: Bläsermusik zum Weihnachtsfestkreis}}}, editor = {{Plewka, F.}}, pages = {{88–89}}, publisher = {{Strube Verlag}}, title = {{{Herr Christ, der einig Gotts Sohn}}}, year = {{2022}}, } @inproceedings{47327, author = {{Plaksin, Anna Viktoria Katrin and Lewis, D. and Şahin, N. and Berndt, Axel}}, booktitle = {{{Music Encoding Conference}}}, pages = {{157–161}}, title = {{{Sharing MEI: Common Semantics in Diverse Musics?}}}, year = {{2022}}, } @article{29790, abstract = {{The free exciton transition (near-band-edge emission, NBE) of ZnO at ≈388 nm can be strongly enhanced and even stimulated by an underlying photonic structure. 1D Photonic crystals, so-called distributed Bragg reflectors, are utilized to suppress the deep-level emission of ZnO (DLE, ≈500–530 nm). The reflector stacks are fabricated in a layer-by-layer procedure by wet-chemical synthesis. They consist of low-ε porous SiO2 layers and high-ε TiO2 layers. Varying the thickness of the SiO2 layers allows tuning the optical bandgap in a wide range between ≈420 and 800 nm. A ZnO layer is deposited on top of the reflector stacks by sol–gel synthesis. The spontaneous photoluminescence (PL) emission of the ZnO film is modulated by the photonic structure. When the optical bandgap of the reflector is in resonance with the deep-level emission of ZnO (DLE, ≈500–530 nm), then this defect-related emission mode is suppressed. Strong NBE emission is observed even when the ZnO layer does not show any NBE emission (due to low crystallinity) in the absence of the photonic structure. With this cost-efficient synthesis method, emitters for, e.g., luminescent gas sensors can be fabricated.}}, author = {{Kothe, Linda and Albert, Maximilian and Meier, Cedrik and Wagner, Thorsten and Tiemann, Michael}}, issn = {{2196-7350}}, journal = {{Advanced Materials Interfaces}}, keywords = {{Mechanical Engineering, Mechanics of Materials}}, publisher = {{Wiley}}, title = {{{Stimulation and Enhancement of Near‐Band‐Edge Emission in Zinc Oxide by Distributed Bragg Reflectors}}}, doi = {{10.1002/admi.202102357}}, volume = {{9}}, year = {{2022}}, } @misc{60057, author = {{Vukadinovic, Vojin Sasa and Seidel-Arpaci, Annette}}, isbn = {{978-3-8394-6004-5 }}, pages = {{417--427}}, publisher = {{transcript}}, title = {{{"Das Neue an der Neuen Rechten ist, dass man sich instrumentalisierend auf die Shoah beziehen kann." Annette Seidel-Arpacı über die Neue Rechte, Transnationalität und die Bekämpfung des Antisemitismus heute}}}, year = {{2022}}, } @inbook{60065, author = {{Vukadinovic, Vojin Sasa}}, booktitle = {{Randgänge der Neuen Rechten. Philosophie, Minderheiten, Transnationalität}}, editor = {{Vukadinović, Vojin Saša}}, isbn = {{ 978-3-8376-6297-6}}, pages = {{9--35}}, publisher = {{transcript}}, title = {{{Randbewusstsein. Die Neue Rechte auf der Höhe der Zeit}}}, year = {{2022}}, } @inbook{59943, author = {{Amelung, Till Randolf and l’Amour laLove , Patsy and Vukadinovic, Vojin Sasa}}, booktitle = {{Jahrbuch Sexualitäten 2022}}, isbn = {{978-3-8353-5275-6}}, pages = {{140--151}}, publisher = {{Wallstein Verlag}}, title = {{{"Ich hab’s nicht gelesen, aber" … Fünf Jahre Beißreflexe}}}, year = {{2022}}, } @article{51192, abstract = {{ Destructive micrograph analysis (MA) is the standard method for the assessment of clinched joints. However, during the joint preparation for the MA, geometric features of the joint can change due to elastic effects and closing cracks. X-ray computed tomography (CT) is a promising alternative to investigate the joint non-estructively. However, if the material properties of similar joining partners are the same, the CT is not able to correctly resolve surfaces in the joint that are close to or pressing onto each other. These surfaces are relevant for the determination of characteristic dimensions such as neck thickness and undercut. By placing a thin, highly radiopaque tin layer between the joining partners, the interfacial area in the reconstructed volume can be highlighted. In this work, a method for the localisation of the tin layer inside the joint as well as threshold value procedures for the outer joint contour in cross section images are investigated. The measured characteristic dimensions are compared with measured values from MA of the same samples and of samples without tin layer. In addition, possible effects of the tin layer on the joining point characteristics as well as problems of the MA are discussed. }}, author = {{Busch, Matthias and Köhler, Daniel and Hausotte, Tino and Kupfer, Robert and Troschitz, Juliane and Gude, Maik}}, issn = {{1435-4934}}, journal = {{e-Journal of Nondestructive Testing}}, number = {{12}}, publisher = {{NDT.net}}, title = {{{Approach to Determine the Characteristic Dimensions of Clinched Joints by Industrial X-ray Computed Tomography}}}, doi = {{10.58286/27519}}, volume = {{27}}, year = {{2022}}, } @inproceedings{51191, abstract = {{Zur Qualitätssicherung von Clinchpunkten werden häufig ex-situ Methoden, wie etwa Schliffbildanalysen, eingesetzt. Diese ermöglichen jedoch nicht die Berücksichtigung von Phänomenen, die während der Belastung auftreten, da sich nach der Entlastung elastische Deformationen zurückbilden und Risse wieder schließen. Dagegen kann mit der in-situ Computertomographie (CT) der innere Deformationszustand des Clinchpunkts, z.B. während eines Scherzugversuchs, untersucht werden. Hierbei ist es für artgleiche Werkstoffe aufgrund der hohen Pressungen im Clinchpunkt schwierig, die Trennfläche zwischen den Fügepartnern im CT-Scan zu erkennen. Daher wird eine radioopake Zwischenschicht aus Zinn in die Trennfläche eingebracht. In dieser Arbeit wird der Einfluss der Zwischenschicht auf die in-situ CT-Scherzugprüfung untersucht. Hierzu werden sowohl Kraft-Verlängerungs-Kurven als auch die Geometrie der Clinchpunkte während der Belastung verglichen.}}, author = {{Köhler, Daniel and Kupfer, Robert and Troschitz, Juliane and Gude, Maik}}, booktitle = {{Tagungsband zur Werkstoffprüfung 2022}}, editor = {{Zimmermann, Martina}}, location = {{Dresden}}, title = {{{Untersuchung zum Einfluss radioopaker Zwischenschichten bei der in-situ CT geclinchter Verbindungen}}}, year = {{2022}}, } @inbook{51195, author = {{Köhler, Daniel and Kupfer, Robert and Troschitz, Juliane and Gude, Maik}}, booktitle = {{The Minerals, Metals & Materials Series}}, isbn = {{9783031062117}}, issn = {{2367-1181}}, publisher = {{Springer International Publishing}}, title = {{{Clinching in In Situ CT—A Novel Validation Method for Mechanical Joining Processes}}}, doi = {{10.1007/978-3-031-06212-4_75}}, year = {{2022}}, } @article{51197, abstract = {{Clinching is a cost efficient method for joining components in series production. To assure the clinch point’s quality, the force displacement curve during clinching or the bottom thickness are monitored. The most significant geometrical characteristics of the clinch point, neck thickness and undercut, are usually tested destructively by microsectioning. However, micrograph preparation goes ahead with a resetting of elastic deformations and crack-closing after unloading. To generate a comprehensive knowledge of the clinch point’s inner geometry under load, in-situ computed tomography (CT) and acoustic testing (TDA) can be combined. While the TDA is highly sensitive to the inner state of the clinch point, it could detect critical events like crack development during loading. If such events are indicated, the loading process is stopped and a stepped in-situ CT of the following crack and deformation development is performed. In this paper, the concept is applied to the process of clinching itself, providing a detailed three-dimensional insight in the development of the joining zone. A test set-up is used which allows a stepwise clinching of two aluminium sheets EN AW 6014. Furthermore, this set-up is positioned within a CT system. In order to minimize X-ray absorption, a beryllium cylinder is used within the set-up frame and clinching tools are made from Si3N4. The actuator and sensor necessary for the TDA are integrated in the set-up. In regular process steps, the clinching process is interrupted in order to perform a TDA and a CT scan. In order to enhance the visibility of the interface, a thin tin layer is positioned between the sheets prior clinching. It is shown, that the test-set up allows a monitoring of the dynamic behaviour of the specimen during clinching while the CT scans visualize the inner geometry and material flow non-destructively.}}, author = {{Köhler, Daniel and Stephan, Richard and Kupfer, Robert and Troschitz, Juliane and Brosius, Alexander and Gude, Maik}}, issn = {{1662-9795}}, journal = {{Key Engineering Materials}}, keywords = {{Mechanical Engineering, Mechanics of Materials, General Materials Science}}, pages = {{1489--1497}}, publisher = {{Trans Tech Publications, Ltd.}}, title = {{{Investigations on Combined <i>In Situ</i> CT and Acoustic Analysis during Clinching}}}, doi = {{10.4028/p-32330d}}, volume = {{926}}, year = {{2022}}, } @article{51193, author = {{Kupfer, Robert and Köhler, Daniel and Römisch, David and Wituschek, Simon and Ewenz, Lars and Kalich, Jan and Weiß, Deborah and Sadeghian, Behdad and Busch, Matthias and Krüger, Jan and Neuser, Moritz and Grydin, Olexandr and Böhnke, Max and Bielak, Christian-Roman and Troschitz, Juliane}}, issn = {{2666-3309}}, journal = {{Journal of Advanced Joining Processes}}, keywords = {{Mechanical Engineering, Mechanics of Materials, Engineering (miscellaneous), Chemical Engineering (miscellaneous)}}, publisher = {{Elsevier BV}}, title = {{{Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties}}}, doi = {{10.1016/j.jajp.2022.100108}}, volume = {{5}}, year = {{2022}}, } @article{51196, author = {{Meschut, G. and Merklein, M. and Brosius, A. and Drummer, D. and Fratini, L. and Füssel, U. and Gude, M. and Homberg, W. and Martins, P.A.F. and Bobbert, M. and Lechner, M. and Kupfer, R. and Gröger, B. and Han, D. and Kalich, J. and Kappe, F. and Kleffel, T. and Köhler, D. and Kuball, C.-M. and Popp, J. and Römisch, D. and Troschitz, J. and Wischer, C. and Wituschek, S. and Wolf, M.}}, issn = {{2666-3309}}, journal = {{Journal of Advanced Joining Processes}}, keywords = {{Mechanical Engineering, Mechanics of Materials, Engineering (miscellaneous), Chemical Engineering (miscellaneous)}}, publisher = {{Elsevier BV}}, title = {{{Review on mechanical joining by plastic deformation}}}, doi = {{10.1016/j.jajp.2022.100113}}, volume = {{5}}, year = {{2022}}, }