[{"title":"Load Path Transmission in Joining Elements","user_id":"38177","abstract":[{"lang":"eng","text":"The mechanical properties of joined structures are determined considerably by the chosen joining technology. With the aim of providing a method that enables a faster and more profound decision-making in the spatial distribution of joining points during product development, a new method for the load path analysis of joining points is presented. For an exemplary car body, the load type in the joining elements, i.e. pure tensile, shear and combined tensile-shear loads, is determined using finite element analysis (FEA). Based on the evaluated loads, the resulting load paths in selected joining points are analyzed using a 2D FE-model of a clinching point. State of the art methods for load path analysis are dependent on the selected coordinate system or the existing stress state. Thus, a general statement about the load transmission path is not possible at this time. Here, a novel method for the analysis of load paths is used, which is independent of the alignment of the analyzed geometry. The basic assumption of the new load path analysis method was confirmed by using a simple specimen with a square hole in different orientations. The results presented here show a possibility to display the load transmission path invariantly. In further steps, the method will be extended for 3D analysis and the investigation of more complex assemblies. The primary goal of this methodical approach is an even load distribution over the joining elements and the component. This will provide a basis for future design approaches aimed at reducing the number of joining elements in joined structures."}],"publication_status":"published","publication_identifier":{"issn":["1662-9795"]},"project":[{"_id":"130","grant_number":"418701707","name":"TRR 285: TRR 285"},{"_id":"132","name":"TRR 285 - B: TRR 285 - Project Area B"},{"name":"TRR 285 – B01: TRR 285 - Subproject B01","_id":"140"}],"date_created":"2021-09-16T08:23:00Z","status":"public","publication":"Key Engineering Materials","department":[{"_id":"321"},{"_id":"149"},{"_id":"630"}],"quality_controlled":"1","author":[{"full_name":"Steinfelder, Christian","first_name":"Christian","last_name":"Steinfelder"},{"last_name":"Martin","id":"38177","first_name":"Sven","full_name":"Martin, Sven"},{"full_name":"Brosius, Alexander","first_name":"Alexander","last_name":"Brosius"},{"first_name":"Thomas","full_name":"Tröster, Thomas","last_name":"Tröster"}],"doi":"10.4028/www.scientific.net/kem.883.73","date_updated":"2023-04-28T11:57:49Z","_id":"24541","page":"73-80","type":"journal_article","year":"2021","citation":{"apa":"Steinfelder, C., Martin, S., Brosius, A., & Tröster, T. (2021). Load Path Transmission in Joining Elements. Key Engineering Materials, 73–80. https://doi.org/10.4028/www.scientific.net/kem.883.73","ama":"Steinfelder C, Martin S, Brosius A, Tröster T. Load Path Transmission in Joining Elements. Key Engineering Materials. Published online 2021:73-80. doi:10.4028/www.scientific.net/kem.883.73","chicago":"Steinfelder, Christian, Sven Martin, Alexander Brosius, and Thomas Tröster. “Load Path Transmission in Joining Elements.” Key Engineering Materials, 2021, 73–80. https://doi.org/10.4028/www.scientific.net/kem.883.73.","mla":"Steinfelder, Christian, et al. “Load Path Transmission in Joining Elements.” Key Engineering Materials, 2021, pp. 73–80, doi:10.4028/www.scientific.net/kem.883.73.","bibtex":"@article{Steinfelder_Martin_Brosius_Tröster_2021, title={Load Path Transmission in Joining Elements}, DOI={10.4028/www.scientific.net/kem.883.73}, journal={Key Engineering Materials}, author={Steinfelder, Christian and Martin, Sven and Brosius, Alexander and Tröster, Thomas}, year={2021}, pages={73–80} }","short":"C. Steinfelder, S. Martin, A. Brosius, T. Tröster, Key Engineering Materials (2021) 73–80.","ieee":"C. Steinfelder, S. Martin, A. Brosius, and T. Tröster, “Load Path Transmission in Joining Elements,” Key Engineering Materials, pp. 73–80, 2021, doi: 10.4028/www.scientific.net/kem.883.73."},"language":[{"iso":"eng"}]},{"year":"2021","citation":{"ieee":"S. Martin and T. Tröster, “Joint point loadings in car bodies – the influence of manufacturing tolerances and scatter in material properties,” ESAFORM 2021, 2021, doi: 10.25518/esaform21.3801.","short":"S. Martin, T. Tröster, ESAFORM 2021 (2021).","bibtex":"@article{Martin_Tröster_2021, title={Joint point loadings in car bodies – the influence of manufacturing tolerances and scatter in material properties}, DOI={10.25518/esaform21.3801}, journal={ESAFORM 2021}, author={Martin, Sven and Tröster, Thomas}, year={2021} }","mla":"Martin, Sven, and Thomas Tröster. “Joint point loadings in car bodies – the influence of manufacturing tolerances and scatter in material properties.” ESAFORM 2021, 2021, doi:10.25518/esaform21.3801.","chicago":"Martin, Sven, and Thomas Tröster. “Joint point loadings in car bodies – the influence of manufacturing tolerances and scatter in material properties.” ESAFORM 2021, 2021. https://doi.org/10.25518/esaform21.3801.","apa":"Martin, S., & Tröster, T. (2021). Joint point loadings in car bodies – the influence of manufacturing tolerances and scatter in material properties. ESAFORM 2021. https://doi.org/10.25518/esaform21.3801","ama":"Martin S, Tröster T. Joint point loadings in car bodies – the influence of manufacturing tolerances and scatter in material properties. ESAFORM 2021. Published online 2021. doi:10.25518/esaform21.3801"},"type":"journal_article","language":[{"iso":"fre"}],"main_file_link":[{"open_access":"1","url":"https://popups.uliege.be/esaform21/index.php?id=3801"}],"doi":"10.25518/esaform21.3801","oa":"1","date_updated":"2023-04-28T11:58:00Z","_id":"24548","publication_status":"published","status":"public","date_created":"2021-09-16T08:34:41Z","project":[{"name":"TRR 285: TRR 285","grant_number":"418701707","_id":"130"},{"name":"TRR 285 - B: TRR 285 - Project Area B","_id":"132"},{"_id":"140","name":"TRR 285 – B01: TRR 285 - Subproject B01"}],"quality_controlled":"1","author":[{"last_name":"Martin","id":"38177","first_name":"Sven","full_name":"Martin, Sven"},{"last_name":"Tröster","first_name":"Thomas","full_name":"Tröster, Thomas"}],"publication":"ESAFORM 2021","department":[{"_id":"321"},{"_id":"149"},{"_id":"630"}],"title":"Joint point loadings in car bodies – the influence of manufacturing tolerances and scatter in material properties","user_id":"38177"},{"quality_controlled":"1","author":[{"id":"45538","last_name":"Stallmeister","full_name":"Stallmeister, Tim","first_name":"Tim"},{"id":"38177","last_name":"Martin","full_name":"Martin, Sven","first_name":"Sven"},{"first_name":"Thorsten","full_name":"Marten, Thorsten","last_name":"Marten","id":"338"},{"first_name":"Thomas","full_name":"Tröster, Thomas","last_name":"Tröster","id":"553"}],"department":[{"_id":"9"},{"_id":"321"},{"_id":"149"}],"status":"public","date_created":"2021-10-28T13:44:02Z","title":"Experimental investigation on lightweight potentials of fiber-metal-laminates for automotive battery cases","user_id":"38177","type":"conference","year":"2021","citation":{"ieee":"T. Stallmeister, S. Martin, T. Marten, and T. Tröster, “Experimental investigation on lightweight potentials of fiber-metal-laminates for automotive battery cases,” presented at the Automotive Circle conference – Battery Systems in Car Body Engineering 2021, Bad Nauheim, 2021.","short":"T. Stallmeister, S. Martin, T. Marten, T. Tröster, in: 2021.","bibtex":"@inproceedings{Stallmeister_Martin_Marten_Tröster_2021, title={Experimental investigation on lightweight potentials of fiber-metal-laminates for automotive battery cases}, author={Stallmeister, Tim and Martin, Sven and Marten, Thorsten and Tröster, Thomas}, year={2021} }","mla":"Stallmeister, Tim, et al. Experimental Investigation on Lightweight Potentials of Fiber-Metal-Laminates for Automotive Battery Cases. 2021.","ama":"Stallmeister T, Martin S, Marten T, Tröster T. Experimental investigation on lightweight potentials of fiber-metal-laminates for automotive battery cases. In: ; 2021.","apa":"Stallmeister, T., Martin, S., Marten, T., & Tröster, T. (2021). Experimental investigation on lightweight potentials of fiber-metal-laminates for automotive battery cases. Automotive Circle conference – Battery Systems in Car Body Engineering 2021, Bad Nauheim.","chicago":"Stallmeister, Tim, Sven Martin, Thorsten Marten, and Thomas Tröster. “Experimental Investigation on Lightweight Potentials of Fiber-Metal-Laminates for Automotive Battery Cases,” 2021."},"language":[{"iso":"eng"}],"date_updated":"2023-04-28T11:58:31Z","_id":"26994","conference":{"end_date":"2021-10-27","location":"Bad Nauheim","start_date":"2021-10-26","name":"Automotive Circle conference – Battery Systems in Car Body Engineering 2021"}},{"language":[{"iso":"eng"}],"citation":{"ama":"Dörner M, Schöppner V. Development of an Analytical Mathematical Modelling Approach for a More Precise Description of Disperse Melting in Solid Bed Breaking Screw Concepts. In: ANTEC 21. ; 2021.","apa":"Dörner, M., & Schöppner, V. (2021). Development of an Analytical Mathematical Modelling Approach for a More Precise Description of Disperse Melting in Solid Bed Breaking Screw Concepts. ANTEC 21. ANTEC 21.","chicago":"Dörner, Marius, and Volker Schöppner. “Development of an Analytical Mathematical Modelling Approach for a More Precise Description of Disperse Melting in Solid Bed Breaking Screw Concepts.” In ANTEC 21, 2021.","bibtex":"@inproceedings{Dörner_Schöppner_2021, title={Development of an Analytical Mathematical Modelling Approach for a More Precise Description of Disperse Melting in Solid Bed Breaking Screw Concepts}, booktitle={ANTEC 21}, author={Dörner, Marius and Schöppner, Volker}, year={2021} }","mla":"Dörner, Marius, and Volker Schöppner. “Development of an Analytical Mathematical Modelling Approach for a More Precise Description of Disperse Melting in Solid Bed Breaking Screw Concepts.” ANTEC 21, 2021.","short":"M. Dörner, V. Schöppner, in: ANTEC 21, 2021.","ieee":"M. Dörner and V. Schöppner, “Development of an Analytical Mathematical Modelling Approach for a More Precise Description of Disperse Melting in Solid Bed Breaking Screw Concepts,” presented at the ANTEC 21, 2021."},"type":"conference","year":"2021","conference":{"name":"ANTEC 21","start_date":"2021-01-12","end_date":"2021-01-12"},"_id":"23835","date_updated":"2023-05-02T06:54:15Z","department":[{"_id":"9"},{"_id":"367"}],"publication":"ANTEC 21","author":[{"first_name":"Marius","full_name":"Dörner, Marius","last_name":"Dörner"},{"first_name":"Volker","full_name":"Schöppner, Volker","last_name":"Schöppner","id":"20530"}],"date_created":"2021-09-07T08:53:24Z","status":"public","user_id":"44116","title":"Development of an Analytical Mathematical Modelling Approach for a More Precise Description of Disperse Melting in Solid Bed Breaking Screw Concepts"},{"issue":"12","_id":"31769","date_updated":"2023-05-02T07:04:16Z","language":[{"iso":"eng"}],"citation":{"short":"E. Moritzer, M. Richters, Journal of Composites Science (2021).","ieee":"E. Moritzer and M. Richters, “Injection Molding of Wood-Filled Thermoplastic Polyurethane,” Journal of Composites Science, no. 12, 2021.","ama":"Moritzer E, Richters M. Injection Molding of Wood-Filled Thermoplastic Polyurethane. Journal of Composites Science. 2021;(12).","apa":"Moritzer, E., & Richters, M. (2021). Injection Molding of Wood-Filled Thermoplastic Polyurethane. Journal of Composites Science, 12.","chicago":"Moritzer, Elmar, and Maximilian Richters. “Injection Molding of Wood-Filled Thermoplastic Polyurethane.” Journal of Composites Science, no. 12 (2021).","mla":"Moritzer, Elmar, and Maximilian Richters. “Injection Molding of Wood-Filled Thermoplastic Polyurethane.” Journal of Composites Science, no. 12, 2021.","bibtex":"@article{Moritzer_Richters_2021, title={Injection Molding of Wood-Filled Thermoplastic Polyurethane}, number={12}, journal={ Journal of Composites Science}, author={Moritzer, Elmar and Richters, Maximilian}, year={2021} }"},"type":"journal_article","year":"2021","user_id":"44116","title":"Injection Molding of Wood-Filled Thermoplastic Polyurethane","date_created":"2022-06-07T09:50:44Z","status":"public","publication_identifier":{"issn":["2504-477X"]},"department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"publication":" Journal of Composites Science","quality_controlled":"1","author":[{"first_name":"Elmar","full_name":"Moritzer, Elmar","last_name":"Moritzer","id":"20531"},{"id":"38221","last_name":"Richters","full_name":"Richters, Maximilian","first_name":"Maximilian"}]},{"title":"Development of a new joining technology for hybrid joints of sheet metal and continuous fiber-reinforced thermoplastics","user_id":"44116","status":"public","date_created":"2022-06-07T09:37:48Z","author":[{"full_name":"Moritzer, Elmar","first_name":"Elmar","id":"20531","last_name":"Moritzer"},{"last_name":"Krassmann","id":"41916","first_name":"Dimitri","full_name":"Krassmann, Dimitri"}],"quality_controlled":"1","publication":"Welding in the World","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"date_updated":"2023-05-02T07:04:57Z","_id":"31757","type":"journal_article","year":"2021","citation":{"ieee":"E. Moritzer and D. Krassmann, “Development of a new joining technology for hybrid joints of sheet metal and continuous fiber-reinforced thermoplastics,” Welding in the World, 2021.","short":"E. Moritzer, D. Krassmann, Welding in the World (2021).","bibtex":"@article{Moritzer_Krassmann_2021, title={Development of a new joining technology for hybrid joints of sheet metal and continuous fiber-reinforced thermoplastics}, journal={Welding in the World}, author={Moritzer, Elmar and Krassmann, Dimitri}, year={2021} }","mla":"Moritzer, Elmar, and Dimitri Krassmann. “Development of a New Joining Technology for Hybrid Joints of Sheet Metal and Continuous Fiber-Reinforced Thermoplastics.” Welding in the World, 2021.","apa":"Moritzer, E., & Krassmann, D. (2021). Development of a new joining technology for hybrid joints of sheet metal and continuous fiber-reinforced thermoplastics. Welding in the World.","ama":"Moritzer E, Krassmann D. Development of a new joining technology for hybrid joints of sheet metal and continuous fiber-reinforced thermoplastics. Welding in the World. Published online 2021.","chicago":"Moritzer, Elmar, and Dimitri Krassmann. “Development of a New Joining Technology for Hybrid Joints of Sheet Metal and Continuous Fiber-Reinforced Thermoplastics.” Welding in the World, 2021."},"language":[{"iso":"eng"}]},{"citation":{"bibtex":"@inproceedings{Rozo Vasquez_Arian_Riepold_Walther_Homberg_Trächtler_2021, title={Magnetic Barkhausen noise analysis for microstructural effects separation during flow forming of metastable austenite 304L.}, booktitle={Proceedings of the 11th International Workshop NDT in Progress}, author={Rozo Vasquez, Julian and Arian, Bahman and Riepold, Markus and Walther, Frank and Homberg, Werner and Trächtler, Ansgar}, year={2021} }","mla":"Rozo Vasquez, Julian, et al. “Magnetic Barkhausen Noise Analysis for Microstructural Effects Separation during Flow Forming of Metastable Austenite 304L.” Proceedings of the 11th International Workshop NDT in Progress, 2021.","apa":"Rozo Vasquez, J., Arian, B., Riepold, M., Walther, F., Homberg, W., & Trächtler, A. (2021). Magnetic Barkhausen noise analysis for microstructural effects separation during flow forming of metastable austenite 304L. Proceedings of the 11th International Workshop NDT in Progress. ENDT&CM 2021 - 11th International Workshop NDT in Progress, Prague.","ama":"Rozo Vasquez J, Arian B, Riepold M, Walther F, Homberg W, Trächtler A. Magnetic Barkhausen noise analysis for microstructural effects separation during flow forming of metastable austenite 304L. In: Proceedings of the 11th International Workshop NDT in Progress. ; 2021.","chicago":"Rozo Vasquez, Julian, Bahman Arian, Markus Riepold, Frank Walther, Werner Homberg, and Ansgar Trächtler. “Magnetic Barkhausen Noise Analysis for Microstructural Effects Separation during Flow Forming of Metastable Austenite 304L.” In Proceedings of the 11th International Workshop NDT in Progress, 2021.","ieee":"J. Rozo Vasquez, B. Arian, M. Riepold, F. Walther, W. Homberg, and A. Trächtler, “Magnetic Barkhausen noise analysis for microstructural effects separation during flow forming of metastable austenite 304L.,” presented at the ENDT&CM 2021 - 11th International Workshop NDT in Progress, Prague, 2021.","short":"J. Rozo Vasquez, B. Arian, M. Riepold, F. Walther, W. Homberg, A. Trächtler, in: Proceedings of the 11th International Workshop NDT in Progress, 2021."},"year":"2021","type":"conference","language":[{"iso":"eng"}],"date_updated":"2023-05-02T08:22:02Z","_id":"30297","conference":{"end_date":"2021.10.07","start_date":"2021.10.04","name":"ENDT&CM 2021 - 11th International Workshop NDT in Progress","location":"Prague"},"quality_controlled":"1","author":[{"last_name":"Rozo Vasquez","full_name":"Rozo Vasquez, Julian","first_name":"Julian"},{"id":"36287","last_name":"Arian","full_name":"Arian, Bahman","first_name":"Bahman"},{"full_name":"Riepold, Markus","first_name":"Markus","last_name":"Riepold"},{"last_name":"Walther","first_name":"Frank","full_name":"Walther, Frank"},{"first_name":"Werner","full_name":"Homberg, Werner","last_name":"Homberg","id":"233"},{"last_name":"Trächtler","id":"552","first_name":"Ansgar","full_name":"Trächtler, Ansgar"}],"department":[{"_id":"156"},{"_id":"153"},{"_id":"241"}],"publication":"Proceedings of the 11th International Workshop NDT in Progress","status":"public","date_created":"2022-03-15T12:07:17Z","title":"Magnetic Barkhausen noise analysis for microstructural effects separation during flow forming of metastable austenite 304L.","user_id":"36287"},{"conference":{"location":"Liège, Belgium","name":"24th International Conference on Material Forming - ESAFORM 2021","start_date":"2021-04-14","end_date":"2021-04-16"},"_id":"23465","year":"2021","type":"conference","citation":{"short":"B. Arian, W. Homberg, M. Riepold, A. Trächtler, J. Rozo Vasquez, F. Walther, in: ULiège Library, Liège, 2021.","ieee":"B. Arian, W. Homberg, M. Riepold, A. Trächtler, J. Rozo Vasquez, and F. Walther, “Forming of metastable austenitic stainless steel tubes with axially graded martensite content by flow-forming,” presented at the 24th International Conference on Material Forming - ESAFORM 2021, Liège, Belgium, 2021.","apa":"Arian, B., Homberg, W., Riepold, M., Trächtler, A., Rozo Vasquez, J., & Walther, F. (2021). Forming of metastable austenitic stainless steel tubes with axially graded martensite content by flow-forming. 24th International Conference on Material Forming - ESAFORM 2021, Liège, Belgium.","ama":"Arian B, Homberg W, Riepold M, Trächtler A, Rozo Vasquez J, Walther F. Forming of metastable austenitic stainless steel tubes with axially graded martensite content by flow-forming. In: ULiège Library; 2021.","chicago":"Arian, Bahman, Werner Homberg, Markus Riepold, Ansgar Trächtler, Julian Rozo Vasquez, and Frank Walther. “Forming of Metastable Austenitic Stainless Steel Tubes with Axially Graded Martensite Content by Flow-Forming.” Liège: ULiège Library, 2021.","mla":"Arian, Bahman, et al. Forming of Metastable Austenitic Stainless Steel Tubes with Axially Graded Martensite Content by Flow-Forming. ULiège Library, 2021.","bibtex":"@inproceedings{Arian_Homberg_Riepold_Trächtler_Rozo Vasquez_Walther_2021, place={Liège}, title={Forming of metastable austenitic stainless steel tubes with axially graded martensite content by flow-forming}, publisher={ULiège Library}, author={Arian, Bahman and Homberg, Werner and Riepold, Markus and Trächtler, Ansgar and Rozo Vasquez, Julian and Walther, Frank}, year={2021} }"},"main_file_link":[{"open_access":"1","url":"https://popups.uliege.be/esaform21/index.php?id=2759"}],"user_id":"36287","abstract":[{"lang":"eng","text":"One of the main objectives of production engineering is to reproducibly manufacture (complex) defect-free parts. To achieve this, it is necessary to employ an appropriate process or tool design. While this will generally prove successful, it cannot, however, offset stochastic defects with local variations in material properties. Closed-loop process control represents a promising approach for a solution in this context. The state of the art involves using this approach to control geometric parameters such as a length. So far, no research or applications have been conducted with closed-loop control for microstructure and product properties. In the project on which this paper is based, the local martensite content of parts is to be adjusted in a highly precise and reproducible manner. The forming process employed is a special, property-controlled flow-forming process. A model-based controller is thus to generate corresponding correction values for the tool-path geometry and tool-path velocity on the basis of online martensite content measurements. For the controller model, it is planned to use a special process or microstructure (correlation) model. The planned paper not only describes the experimental setup but also presents results of initial experimental investigations for subsequent use in the closed-loop control of α’-martensite content during flow-forming."}],"date_created":"2021-08-23T13:00:35Z","status":"public","keyword":["Flow-forming","Spinning","Process Strategy","Martensite Content","Property Control","Micromagnetic Measurement","Metastable Austenitic Stainless Steel"],"publisher":"ULiège Library","quality_controlled":"1","author":[{"last_name":"Arian","id":"36287","first_name":"Bahman","full_name":"Arian, Bahman"},{"last_name":"Homberg","id":"233","first_name":"Werner","full_name":"Homberg, Werner"},{"first_name":"Markus","full_name":"Riepold, Markus","last_name":"Riepold"},{"last_name":"Trächtler","id":"552","first_name":"Ansgar","full_name":"Trächtler, Ansgar"},{"full_name":"Rozo Vasquez, Julian","first_name":"Julian","last_name":"Rozo Vasquez"},{"first_name":"Frank","full_name":"Walther, Frank","last_name":"Walther"}],"oa":"1","date_updated":"2023-05-02T08:27:48Z","language":[{"iso":"eng"}],"title":"Forming of metastable austenitic stainless steel tubes with axially graded martensite content by flow-forming","place":"Liège","publication_status":"published","publication_identifier":{"isbn":["978-2-87019-302-0"],"eisbn":["978-2-87019-303-7"]},"department":[{"_id":"156"},{"_id":"153"},{"_id":"241"}]},{"year":"2021","citation":{"short":"S. Ahrens, in: R. Jakob (Ed.), Lichtspiele. Kino und Film im Brucker Land von den Anfängen bis zum Siegeszug des Fernsehens., Bauernhofmuseum Jexhof, Schöngeising, 2021, pp. 104–109.","ieee":"S. Ahrens, “Francesco (Franz) Stefani - Ein Regisseur mit barocken Anklägen. ,” in Lichtspiele. Kino und Film im Brucker Land von den Anfängen bis zum Siegeszug des Fernsehens., R. Jakob, Ed. Schöngeising: Bauernhofmuseum Jexhof, 2021, pp. 104–109.","chicago":"Ahrens, Stephan. “Francesco (Franz) Stefani - Ein Regisseur mit barocken Anklägen. .” In Lichtspiele. Kino und Film im Brucker Land von den Anfängen bis zum Siegeszug des Fernsehens., edited by Reinhard Jakob, 104–9. Schöngeising: Bauernhofmuseum Jexhof, 2021.","ama":"Ahrens S. Francesco (Franz) Stefani - Ein Regisseur mit barocken Anklägen. . In: Jakob R, ed. Lichtspiele. Kino und Film im Brucker Land von den Anfängen bis zum Siegeszug des Fernsehens. Bauernhofmuseum Jexhof; 2021:104-109.","apa":"Ahrens, S. (2021). Francesco (Franz) Stefani - Ein Regisseur mit barocken Anklägen. . In R. Jakob (Ed.), Lichtspiele. Kino und Film im Brucker Land von den Anfängen bis zum Siegeszug des Fernsehens. (pp. 104–109). Bauernhofmuseum Jexhof.","bibtex":"@inbook{Ahrens_2021, place={Schöngeising}, title={Francesco (Franz) Stefani - Ein Regisseur mit barocken Anklägen. }, booktitle={Lichtspiele. Kino und Film im Brucker Land von den Anfängen bis zum Siegeszug des Fernsehens.}, publisher={Bauernhofmuseum Jexhof}, author={Ahrens, Stephan}, editor={Jakob, Reinhard}, year={2021}, pages={104–109} }","mla":"Ahrens, Stephan. “Francesco (Franz) Stefani - Ein Regisseur mit barocken Anklägen. .” Lichtspiele. Kino und Film im Brucker Land von den Anfängen bis zum Siegeszug des Fernsehens., edited by Reinhard Jakob, Bauernhofmuseum Jexhof, 2021, pp. 104–09."},"type":"book_chapter","page":"104-109","language":[{"iso":"ger"}],"_id":"44367","date_updated":"2023-05-03T07:16:07Z","publisher":"Bauernhofmuseum Jexhof","author":[{"first_name":"Stephan","full_name":"Ahrens, Stephan","last_name":"Ahrens","id":"89265"}],"publication":"Lichtspiele. Kino und Film im Brucker Land von den Anfängen bis zum Siegeszug des Fernsehens.","department":[{"_id":"731"}],"editor":[{"last_name":"Jakob","first_name":"Reinhard","full_name":"Jakob, Reinhard"}],"status":"public","date_created":"2023-05-03T07:15:55Z","place":"Schöngeising","title":"Francesco (Franz) Stefani - Ein Regisseur mit barocken Anklägen. ","user_id":"21240"},{"year":"2021","citation":{"short":"N.F. Tolksdorf, S. Siebert, I. Zorn, I. Horwath, K.J. Rohlfing, International Journal of Social Robotics (2021) 129–140.","ieee":"N. F. Tolksdorf, S. Siebert, I. Zorn, I. Horwath, and K. J. Rohlfing, “Ethical Considerations of Applying Robots in Kindergarten Settings: Towards an Approach from a Macroperspective,” International Journal of Social Robotics, pp. 129–140, 2021, doi: 10.1007/s12369-020-00622-3.","chicago":"Tolksdorf, Nils Frederik, Scarlet Siebert, Isabel Zorn, Ilona Horwath, and Katharina J. Rohlfing. “Ethical Considerations of Applying Robots in Kindergarten Settings: Towards an Approach from a Macroperspective.” International Journal of Social Robotics, 2021, 129–40. https://doi.org/10.1007/s12369-020-00622-3.","ama":"Tolksdorf NF, Siebert S, Zorn I, Horwath I, Rohlfing KJ. Ethical Considerations of Applying Robots in Kindergarten Settings: Towards an Approach from a Macroperspective. International Journal of Social Robotics. Published online 2021:129-140. doi:10.1007/s12369-020-00622-3","apa":"Tolksdorf, N. F., Siebert, S., Zorn, I., Horwath, I., & Rohlfing, K. J. (2021). Ethical Considerations of Applying Robots in Kindergarten Settings: Towards an Approach from a Macroperspective. International Journal of Social Robotics, 129–140. https://doi.org/10.1007/s12369-020-00622-3","mla":"Tolksdorf, Nils Frederik, et al. “Ethical Considerations of Applying Robots in Kindergarten Settings: Towards an Approach from a Macroperspective.” International Journal of Social Robotics, 2021, pp. 129–40, doi:10.1007/s12369-020-00622-3.","bibtex":"@article{Tolksdorf_Siebert_Zorn_Horwath_Rohlfing_2021, title={Ethical Considerations of Applying Robots in Kindergarten Settings: Towards an Approach from a Macroperspective}, DOI={10.1007/s12369-020-00622-3}, journal={International Journal of Social Robotics}, author={Tolksdorf, Nils Frederik and Siebert, Scarlet and Zorn, Isabel and Horwath, Ilona and Rohlfing, Katharina J.}, year={2021}, pages={129–140} }"},"type":"journal_article","page":"129-140","language":[{"iso":"eng"}],"doi":"10.1007/s12369-020-00622-3","date_updated":"2023-05-03T08:24:33Z","_id":"24901","publication_identifier":{"issn":["1875-4791","1875-4805"]},"publication_status":"published","status":"public","date_created":"2021-09-23T11:03:50Z","quality_controlled":"1","author":[{"id":"43289","last_name":"Tolksdorf","full_name":"Tolksdorf, Nils Frederik","orcid":"0000-0001-6093-1219","first_name":"Nils Frederik"},{"last_name":"Siebert","first_name":"Scarlet","full_name":"Siebert, Scarlet"},{"full_name":"Zorn, Isabel","first_name":"Isabel","last_name":"Zorn"},{"first_name":"Ilona","full_name":"Horwath, Ilona","last_name":"Horwath","id":"68836"},{"first_name":"Katharina J.","full_name":"Rohlfing, Katharina J.","last_name":"Rohlfing","id":"50352"}],"department":[{"_id":"749"}],"publication":"International Journal of Social Robotics","title":"Ethical Considerations of Applying Robots in Kindergarten Settings: Towards an Approach from a Macroperspective","user_id":"68836","abstract":[{"text":"AbstractIn child–robot interaction (cHRI) research, many studies pursue the goal to develop interactive systems that can be applied in everyday settings. For early education, increasingly, the setting of a kindergarten is targeted. However, when cHRI and research are brought into a kindergarten, a range of ethical and related procedural aspects have to be considered and dealt with. While ethical models elaborated within other human–robot interaction settings, e.g., assisted living contexts, can provide some important indicators for relevant issues, we argue that it is important to start developing a systematic approach to identify and tackle those ethical issues which rise with cHRI in kindergarten settings on a more global level and address the impact of the technology from a macroperspective beyond the effects on the individual. Based on our experience in conducting studies with children in general and pedagogical considerations on the role of the institution of kindergarten in specific, in this paper, we enfold some relevant aspects that have barely been addressed in an explicit way in current cHRI research. Four areas are analyzed and key ethical issues are identified in each area: (1) the institutional setting of a kindergarten, (2) children as a vulnerable group, (3) the caregivers’ role, and (4) pedagogical concepts. With our considerations, we aim at (i) broadening the methodology of the current studies within the area of cHRI, (ii) revalidate it based on our comprehensive empirical experience with research in kindergarten settings, both laboratory and real-world contexts, and (iii) provide a framework for the development of a more systematic approach to address the ethical issues in cHRI research within kindergarten settings.","lang":"eng"}]},{"user_id":"89054","date_created":"2023-05-03T08:13:58Z","status":"public","volume":55,"keyword":["Dispersive liquid-liquid microextraction (DLLME)","gas chromatography – mass spectrometry (GC-MS)","polycyclic aromatic hydrocarbons","QuEChERS"],"publication":"Analytical Letters","publisher":"Informa UK Limited","author":[{"last_name":"Chormey","first_name":"Dotse Selali","full_name":"Chormey, Dotse Selali"},{"id":"89054","last_name":"Tonbul","full_name":"Tonbul, Güldeniz","orcid":"0000-0002-0999-9995","first_name":"Güldeniz"},{"last_name":"Soylu","full_name":"Soylu, Güneş","first_name":"Güneş"},{"last_name":"Saygılar","first_name":"Ahmet","full_name":"Saygılar, Ahmet"},{"last_name":"Bakırdere","full_name":"Bakırdere, Sezgin","first_name":"Sezgin"}],"issue":"2","_id":"44375","intvolume":" 55","page":"237-245","citation":{"bibtex":"@article{Chormey_Tonbul_Soylu_Saygılar_Bakırdere_2021, title={Determination of Four Priority Polycyclic Aromatic Hydrocarbons in Food Samples by Gas Chromatography – Mass Spectrometry (GC-MS) after Vortex Assisted Dispersive Liquid-Liquid Microextraction (DLLME)}, volume={55}, DOI={10.1080/00032719.2021.1922432}, number={2}, journal={Analytical Letters}, publisher={Informa UK Limited}, author={Chormey, Dotse Selali and Tonbul, Güldeniz and Soylu, Güneş and Saygılar, Ahmet and Bakırdere, Sezgin}, year={2021}, pages={237–245} }","mla":"Chormey, Dotse Selali, et al. “Determination of Four Priority Polycyclic Aromatic Hydrocarbons in Food Samples by Gas Chromatography – Mass Spectrometry (GC-MS) after Vortex Assisted Dispersive Liquid-Liquid Microextraction (DLLME).” Analytical Letters, vol. 55, no. 2, Informa UK Limited, 2021, pp. 237–45, doi:10.1080/00032719.2021.1922432.","apa":"Chormey, D. S., Tonbul, G., Soylu, G., Saygılar, A., & Bakırdere, S. (2021). Determination of Four Priority Polycyclic Aromatic Hydrocarbons in Food Samples by Gas Chromatography – Mass Spectrometry (GC-MS) after Vortex Assisted Dispersive Liquid-Liquid Microextraction (DLLME). Analytical Letters, 55(2), 237–245. https://doi.org/10.1080/00032719.2021.1922432","ama":"Chormey DS, Tonbul G, Soylu G, Saygılar A, Bakırdere S. Determination of Four Priority Polycyclic Aromatic Hydrocarbons in Food Samples by Gas Chromatography – Mass Spectrometry (GC-MS) after Vortex Assisted Dispersive Liquid-Liquid Microextraction (DLLME). Analytical Letters. 2021;55(2):237-245. doi:10.1080/00032719.2021.1922432","chicago":"Chormey, Dotse Selali, Güldeniz Tonbul, Güneş Soylu, Ahmet Saygılar, and Sezgin Bakırdere. “Determination of Four Priority Polycyclic Aromatic Hydrocarbons in Food Samples by Gas Chromatography – Mass Spectrometry (GC-MS) after Vortex Assisted Dispersive Liquid-Liquid Microextraction (DLLME).” Analytical Letters 55, no. 2 (2021): 237–45. https://doi.org/10.1080/00032719.2021.1922432.","ieee":"D. S. Chormey, G. Tonbul, G. Soylu, A. Saygılar, and S. Bakırdere, “Determination of Four Priority Polycyclic Aromatic Hydrocarbons in Food Samples by Gas Chromatography – Mass Spectrometry (GC-MS) after Vortex Assisted Dispersive Liquid-Liquid Microextraction (DLLME),” Analytical Letters, vol. 55, no. 2, pp. 237–245, 2021, doi: 10.1080/00032719.2021.1922432.","short":"D.S. Chormey, G. Tonbul, G. Soylu, A. Saygılar, S. Bakırdere, Analytical Letters 55 (2021) 237–245."},"type":"journal_article","year":"2021","title":"Determination of Four Priority Polycyclic Aromatic Hydrocarbons in Food Samples by Gas Chromatography – Mass Spectrometry (GC-MS) after Vortex Assisted Dispersive Liquid-Liquid Microextraction (DLLME)","publication_status":"published","publication_identifier":{"issn":["0003-2719","1532-236X"]},"doi":"10.1080/00032719.2021.1922432","date_updated":"2023-05-03T08:26:30Z","language":[{"iso":"eng"}]},{"date_updated":"2023-05-03T08:52:26Z","_id":"44386","year":"2021","type":"review","citation":{"short":"S. Ahrens, In: Filmblatt 25:73/74 (2021) 142–145.","ieee":"S. Ahrens, “Hermann Kappelhoff, Christine Lötscher, Daniel Illger (Hg.): Filmische Seitenblicke. Cinepoetische Exkursionen ins Kino von 1968. Berlin, Bosten: De Gruyter 2018,” In: Filmblatt 25:73/74 . pp. 142–145, 2021.","apa":"Ahrens, S. (2021). Hermann Kappelhoff, Christine Lötscher, Daniel Illger (Hg.): Filmische Seitenblicke. Cinepoetische Exkursionen ins Kino von 1968. Berlin, Bosten: De Gruyter 2018. In In: Filmblatt 25:73/74 (pp. 142–145).","ama":"Ahrens S. Hermann Kappelhoff, Christine Lötscher, Daniel Illger (Hg.): Filmische Seitenblicke. Cinepoetische Exkursionen ins Kino von 1968. Berlin, Bosten: De Gruyter 2018. In: Filmblatt 25:73/74 . Published online 2021:142-145.","chicago":"Ahrens, Stephan. “Hermann Kappelhoff, Christine Lötscher, Daniel Illger (Hg.): Filmische Seitenblicke. Cinepoetische Exkursionen ins Kino von 1968. Berlin, Bosten: De Gruyter 2018.” In: Filmblatt 25:73/74 , 2021.","bibtex":"@article{Ahrens_2021, title={Hermann Kappelhoff, Christine Lötscher, Daniel Illger (Hg.): Filmische Seitenblicke. Cinepoetische Exkursionen ins Kino von 1968. Berlin, Bosten: De Gruyter 2018}, journal={In: Filmblatt 25:73/74 }, author={Ahrens, Stephan}, year={2021}, pages={142–145} }","mla":"Ahrens, Stephan. “Hermann Kappelhoff, Christine Lötscher, Daniel Illger (Hg.): Filmische Seitenblicke. Cinepoetische Exkursionen ins Kino von 1968. Berlin, Bosten: De Gruyter 2018.” In: Filmblatt 25:73/74 , 2021, pp. 142–45."},"page":"142-145","language":[{"iso":"ger"}],"title":"Hermann Kappelhoff, Christine Lötscher, Daniel Illger (Hg.): Filmische Seitenblicke. Cinepoetische Exkursionen ins Kino von 1968. Berlin, Bosten: De Gruyter 2018","user_id":"21240","author":[{"first_name":"Stephan","full_name":"Ahrens, Stephan","last_name":"Ahrens","id":"89265"}],"department":[{"_id":"731"}],"publication":"In: Filmblatt 25:73/74 ","status":"public","date_created":"2023-05-03T08:52:15Z"},{"_id":"44381","date_updated":"2023-05-03T08:50:50Z","language":[{"iso":"ger"}],"page":"142-145","year":"2021","citation":{"short":"S. Ahrens, In: Filmblatt 25:73/74 (2021) 142–145.","ieee":"S. Ahrens, “Christina Gerhardt, Marco Abel (Hg.): Celluloid Revolt. German Screen Cultures and the Long 1968. Rochester: Camden House 2019 ,” In: Filmblatt 25:73/74 . pp. 142–145, 2021.","apa":"Ahrens, S. (2021). Christina Gerhardt, Marco Abel (Hg.): Celluloid Revolt. German Screen Cultures and the Long 1968. Rochester: Camden House 2019 . In In: Filmblatt 25:73/74 (pp. 142–145).","ama":"Ahrens S. Christina Gerhardt, Marco Abel (Hg.): Celluloid Revolt. German Screen Cultures and the Long 1968. Rochester: Camden House 2019 . In: Filmblatt 25:73/74 . Published online 2021:142-145.","chicago":"Ahrens, Stephan. “Christina Gerhardt, Marco Abel (Hg.): Celluloid Revolt. German Screen Cultures and the Long 1968. Rochester: Camden House 2019 .” In: Filmblatt 25:73/74 , 2021.","mla":"Ahrens, Stephan. “Christina Gerhardt, Marco Abel (Hg.): Celluloid Revolt. German Screen Cultures and the Long 1968. Rochester: Camden House 2019 .” In: Filmblatt 25:73/74 , 2021, pp. 142–45.","bibtex":"@article{Ahrens_2021, title={Christina Gerhardt, Marco Abel (Hg.): Celluloid Revolt. German Screen Cultures and the Long 1968. Rochester: Camden House 2019 }, journal={In: Filmblatt 25:73/74 }, author={Ahrens, Stephan}, year={2021}, pages={142–145} }"},"type":"review","user_id":"21240","title":"Christina Gerhardt, Marco Abel (Hg.): Celluloid Revolt. German Screen Cultures and the Long 1968. Rochester: Camden House 2019 ","date_created":"2023-05-03T08:50:36Z","status":"public","publication":"In: Filmblatt 25:73/74 ","department":[{"_id":"731"}],"author":[{"last_name":"Ahrens","id":"89265","first_name":"Stephan","full_name":"Ahrens, Stephan"}]},{"year":"2021","type":"newspaper_article","citation":{"short":"S. Ahrens, Kinema Kommunal, Nummer 2, Juni 2021 (2021).","ieee":"S. Ahrens, “Sammler und Beobachter. Das Programm der diesjährigen Internationalen Kurzfilmtage Oberhausen, Dschungel (jungle World),” Kinema Kommunal, Nummer 2, Juni 2021, 2021.","chicago":"Ahrens, Stephan. “Sammler und Beobachter. Das Programm der diesjährigen Internationalen Kurzfilmtage Oberhausen, Dschungel (jungle World).” Kinema Kommunal, Nummer 2, Juni 2021, 2021.","apa":"Ahrens, S. (2021). Sammler und Beobachter. Das Programm der diesjährigen Internationalen Kurzfilmtage Oberhausen, Dschungel (jungle World). Kinema Kommunal, Nummer 2, Juni 2021.","ama":"Ahrens S. Sammler und Beobachter. Das Programm der diesjährigen Internationalen Kurzfilmtage Oberhausen, Dschungel (jungle World). Kinema Kommunal, Nummer 2, Juni 2021. 2021.","bibtex":"@article{Ahrens_2021, title={Sammler und Beobachter. Das Programm der diesjährigen Internationalen Kurzfilmtage Oberhausen, Dschungel (jungle World)}, journal={Kinema Kommunal, Nummer 2, Juni 2021}, author={Ahrens, Stephan}, year={2021} }","mla":"Ahrens, Stephan. “Sammler und Beobachter. Das Programm der diesjährigen Internationalen Kurzfilmtage Oberhausen, Dschungel (jungle World).” Kinema Kommunal, Nummer 2, Juni 2021, 2021."},"language":[{"iso":"ger"}],"publication_date":"29.04.2021","_id":"44392","date_updated":"2023-05-03T09:04:56Z","status":"public","date_created":"2023-05-03T09:04:34Z","author":[{"id":"89265","last_name":"Ahrens","full_name":"Ahrens, Stephan","first_name":"Stephan"}],"publication":"Kinema Kommunal, Nummer 2, Juni 2021","department":[{"_id":"731"}],"title":"Sammler und Beobachter. Das Programm der diesjährigen Internationalen Kurzfilmtage Oberhausen, Dschungel (jungle World)","user_id":"21240"},{"status":"public","date_created":"2023-05-03T09:01:19Z","author":[{"first_name":"Stephan","full_name":"Ahrens, Stephan","last_name":"Ahrens","id":"89265"}],"publication":"In: Filmdienst, 24.08.2021","department":[{"_id":"731"}],"user_id":"21240","title":"Guy Gilles und das Kino der Entwurzelung","language":[{"iso":"ger"}],"type":"newspaper_article","year":"2021","citation":{"apa":"Ahrens, S. (2021). Guy Gilles und das Kino der Entwurzelung. In: Filmdienst, 24.08.2021.","ama":"Ahrens S. Guy Gilles und das Kino der Entwurzelung. In: Filmdienst, 24.08.2021. 2021.","chicago":"Ahrens, Stephan. “Guy Gilles und das Kino der Entwurzelung.” In: Filmdienst, 24.08.2021, 2021.","mla":"Ahrens, Stephan. “Guy Gilles und das Kino der Entwurzelung.” In: Filmdienst, 24.08.2021, 2021.","bibtex":"@article{Ahrens_2021, title={Guy Gilles und das Kino der Entwurzelung}, journal={In: Filmdienst, 24.08.2021}, author={Ahrens, Stephan}, year={2021} }","short":"S. Ahrens, In: Filmdienst, 24.08.2021 (2021).","ieee":"S. Ahrens, “Guy Gilles und das Kino der Entwurzelung,” In: Filmdienst, 24.08.2021, 2021."},"main_file_link":[{"url":"https://www.filmdienst.de/artikel/49657/das-kino-des-guy-gilles "}],"publication_date":"24.08.2021","date_updated":"2023-05-03T09:01:33Z","_id":"44391"},{"title":"Biografie Cox Habbema","user_id":"21240","date_created":"2023-05-03T11:45:17Z","status":"public","department":[{"_id":"731"}],"publisher":"DEFA-Stiftung","author":[{"full_name":"Ahrens, Stephan","first_name":"Stephan","id":"89265","last_name":"Ahrens"}],"date_updated":"2023-05-03T11:49:27Z","_id":"44426","year":"2021","citation":{"bibtex":"@book{Ahrens_2021, title={Biografie Cox Habbema}, publisher={DEFA-Stiftung}, author={Ahrens, Stephan}, year={2021} }","mla":"Ahrens, Stephan. Biografie Cox Habbema. DEFA-Stiftung, 2021.","chicago":"Ahrens, Stephan. Biografie Cox Habbema. DEFA-Stiftung, 2021.","apa":"Ahrens, S. (2021). Biografie Cox Habbema. DEFA-Stiftung.","ama":"Ahrens S. Biografie Cox Habbema. DEFA-Stiftung; 2021.","ieee":"S. Ahrens, Biografie Cox Habbema. DEFA-Stiftung, 2021.","short":"S. Ahrens, Biografie Cox Habbema, DEFA-Stiftung, 2021."},"type":"misc","language":[{"iso":"ger"}],"main_file_link":[{"url":"https://www.defa-stiftung.de/defa/biografien/kuenstlerin/cox-habbema/"}]},{"status":"public","date_created":"2023-05-03T12:04:08Z","publisher":"DEFA-Stiftung","author":[{"full_name":"Ahrens, Stephan","first_name":"Stephan","id":"89265","last_name":"Ahrens"}],"department":[{"_id":"731"}],"title":"Biografie Peter Rabenalt","user_id":"21240","citation":{"apa":"Ahrens, S. (2021). Biografie Peter Rabenalt. DEFA-Stiftung.","ama":"Ahrens S. Biografie Peter Rabenalt. DEFA-Stiftung; 2021.","chicago":"Ahrens, Stephan. Biografie Peter Rabenalt. DEFA-Stiftung, 2021.","mla":"Ahrens, Stephan. Biografie Peter Rabenalt. DEFA-Stiftung, 2021.","bibtex":"@book{Ahrens_2021, title={Biografie Peter Rabenalt}, publisher={DEFA-Stiftung}, author={Ahrens, Stephan}, year={2021} }","short":"S. Ahrens, Biografie Peter Rabenalt, DEFA-Stiftung, 2021.","ieee":"S. Ahrens, Biografie Peter Rabenalt. DEFA-Stiftung, 2021."},"type":"misc","year":"2021","language":[{"iso":"ger"}],"main_file_link":[{"url":"https://www.defa-stiftung.de/defa/biografien/kuenstlerin/peter-rabenalt/"}],"_id":"44431","date_updated":"2023-05-03T12:04:12Z"},{"publisher":"Springer VS","author":[{"last_name":"Bruckner","full_name":"Bruckner, Franziska","first_name":"Franziska"},{"orcid":"0000-0001-5352-9715","full_name":"Eckel, Julia","first_name":"Julia","id":"94407","last_name":"Eckel"},{"last_name":"Feyersinger","first_name":"Erwin","full_name":"Feyersinger, Erwin"},{"full_name":"Freisleben-Teutscher, Christian F.","first_name":"Christian F.","last_name":"Freisleben-Teutscher"},{"last_name":"Ohnmacht","first_name":"Tina","full_name":"Ohnmacht, Tina"}],"department":[{"_id":"731"}],"publication":"In Wirklichkeit Animation …","status":"public","date_created":"2023-05-04T07:44:34Z","editor":[{"last_name":"Bruckner","full_name":"Bruckner, Franziska","first_name":"Franziska"},{"first_name":"Jürgen","full_name":"Hagler, Jürgen","last_name":"Hagler"},{"last_name":"Lang","first_name":"Holger","full_name":"Lang, Holger"},{"last_name":"Reinert","first_name":"Maike Sarah","full_name":"Reinert, Maike Sarah"}],"place":"Wiesbaden","extern":"1","user_id":"21240","title":"Bilden mit/zu Animation","language":[{"iso":"ger"}],"year":"2021","type":"book_chapter","citation":{"chicago":"Bruckner, Franziska, Julia Eckel, Erwin Feyersinger, Christian F. Freisleben-Teutscher, and Tina Ohnmacht. “Bilden mit/zu Animation.” In In Wirklichkeit Animation …, edited by Franziska Bruckner, Jürgen Hagler, Holger Lang, and Maike Sarah Reinert, 197–216. Wiesbaden: Springer VS, 2021.","apa":"Bruckner, F., Eckel, J., Feyersinger, E., Freisleben-Teutscher, C. F., & Ohnmacht, T. (2021). Bilden mit/zu Animation. In F. Bruckner, J. Hagler, H. Lang, & M. S. Reinert (Eds.), In Wirklichkeit Animation … (pp. 197–216). Springer VS.","ama":"Bruckner F, Eckel J, Feyersinger E, Freisleben-Teutscher CF, Ohnmacht T. Bilden mit/zu Animation. In: Bruckner F, Hagler J, Lang H, Reinert MS, eds. In Wirklichkeit Animation …. Springer VS; 2021:197-216.","mla":"Bruckner, Franziska, et al. “Bilden mit/zu Animation.” In Wirklichkeit Animation …, edited by Franziska Bruckner et al., Springer VS, 2021, pp. 197–216.","bibtex":"@inbook{Bruckner_Eckel_Feyersinger_Freisleben-Teutscher_Ohnmacht_2021, place={Wiesbaden}, title={Bilden mit/zu Animation}, booktitle={In Wirklichkeit Animation …}, publisher={Springer VS}, author={Bruckner, Franziska and Eckel, Julia and Feyersinger, Erwin and Freisleben-Teutscher, Christian F. and Ohnmacht, Tina}, editor={Bruckner, Franziska and Hagler, Jürgen and Lang, Holger and Reinert, Maike Sarah}, year={2021}, pages={197–216} }","short":"F. Bruckner, J. Eckel, E. Feyersinger, C.F. Freisleben-Teutscher, T. Ohnmacht, in: F. Bruckner, J. Hagler, H. Lang, M.S. Reinert (Eds.), In Wirklichkeit Animation …, Springer VS, Wiesbaden, 2021, pp. 197–216.","ieee":"F. Bruckner, J. Eckel, E. Feyersinger, C. F. Freisleben-Teutscher, and T. Ohnmacht, “Bilden mit/zu Animation,” in In Wirklichkeit Animation …, F. Bruckner, J. Hagler, H. Lang, and M. S. Reinert, Eds. Wiesbaden: Springer VS, 2021, pp. 197–216."},"page":"197-216","date_updated":"2023-05-04T07:44:39Z","_id":"44466"},{"editor":[{"first_name":"Franziska","full_name":"Bruckner, Franziska","last_name":"Bruckner"},{"last_name":"Hagler","full_name":"Hagler, Jürgen","first_name":"Jürgen"},{"first_name":"Holger","full_name":"Lang, Holger","last_name":"Lang"},{"last_name":"Reinert","first_name":"Maike Sarah","full_name":"Reinert, Maike Sarah"}],"date_created":"2023-05-04T07:28:04Z","status":"public","publication":" In Wirklichkeit Animation ... ","department":[{"_id":"731"}],"publisher":"Springer VS","author":[{"last_name":"Eckel","id":"94407","first_name":"Julia","full_name":"Eckel, Julia","orcid":"0000-0001-5352-9715"}],"title":"Tech Demo/Tech Doku. Zur Wirklichkeit des Animierens","user_id":"21240","extern":"1","place":"Wiesbaden","page":"11-32","year":"2021","type":"book_chapter","citation":{"chicago":"Eckel, Julia. “Tech Demo/Tech Doku. Zur Wirklichkeit des Animierens.” In In Wirklichkeit Animation ... , edited by Franziska Bruckner, Jürgen Hagler, Holger Lang, and Maike Sarah Reinert, 11–32. Wiesbaden: Springer VS, 2021.","apa":"Eckel, J. (2021). Tech Demo/Tech Doku. Zur Wirklichkeit des Animierens. In F. Bruckner, J. Hagler, H. Lang, & M. S. Reinert (Eds.), In Wirklichkeit Animation ... (pp. 11–32). Springer VS.","ama":"Eckel J. Tech Demo/Tech Doku. Zur Wirklichkeit des Animierens. In: Bruckner F, Hagler J, Lang H, Reinert MS, eds. In Wirklichkeit Animation ... . Springer VS; 2021:11-32.","bibtex":"@inbook{Eckel_2021, place={Wiesbaden}, title={Tech Demo/Tech Doku. Zur Wirklichkeit des Animierens}, booktitle={ In Wirklichkeit Animation ... }, publisher={Springer VS}, author={Eckel, Julia}, editor={Bruckner, Franziska and Hagler, Jürgen and Lang, Holger and Reinert, Maike Sarah}, year={2021}, pages={11–32} }","mla":"Eckel, Julia. “Tech Demo/Tech Doku. Zur Wirklichkeit des Animierens.” In Wirklichkeit Animation ... , edited by Franziska Bruckner et al., Springer VS, 2021, pp. 11–32.","short":"J. Eckel, in: F. Bruckner, J. Hagler, H. Lang, M.S. Reinert (Eds.), In Wirklichkeit Animation ... , Springer VS, Wiesbaden, 2021, pp. 11–32.","ieee":"J. Eckel, “Tech Demo/Tech Doku. Zur Wirklichkeit des Animierens,” in In Wirklichkeit Animation ... , F. Bruckner, J. Hagler, H. Lang, and M. S. Reinert, Eds. Wiesbaden: Springer VS, 2021, pp. 11–32."},"language":[{"iso":"ger"}],"date_updated":"2023-05-04T07:28:10Z","_id":"44465"},{"language":[{"iso":"ger"}],"page":"77-112","citation":{"ieee":"J. Eckel, “Zeitliche Komplexität im Film,” in FilmZeit – Zeitdimensionen des Films., S. Kreuzer, Ed. Marburg: Schüren, 2021, pp. 77–112.","short":"J. Eckel, in: S. Kreuzer (Ed.), FilmZeit – Zeitdimensionen des Films., Schüren, Marburg, 2021, pp. 77–112.","mla":"Eckel, Julia. “Zeitliche Komplexität im Film.” FilmZeit – Zeitdimensionen des Films., edited by Stefanie Kreuzer, Schüren, 2021, pp. 77–112.","bibtex":"@inbook{Eckel_2021, place={Marburg}, title={Zeitliche Komplexität im Film}, booktitle={FilmZeit – Zeitdimensionen des Films.}, publisher={Schüren}, author={Eckel, Julia}, editor={Kreuzer, Stefanie}, year={2021}, pages={77–112} }","chicago":"Eckel, Julia. “Zeitliche Komplexität im Film.” In FilmZeit – Zeitdimensionen des Films., edited by Stefanie Kreuzer, 77–112. Marburg: Schüren, 2021.","apa":"Eckel, J. (2021). Zeitliche Komplexität im Film. In S. Kreuzer (Ed.), FilmZeit – Zeitdimensionen des Films. (pp. 77–112). Schüren.","ama":"Eckel J. Zeitliche Komplexität im Film. In: Kreuzer S, ed. FilmZeit – Zeitdimensionen des Films. Schüren; 2021:77-112."},"type":"book_chapter","year":"2021","_id":"44467","date_updated":"2023-05-04T08:06:13Z","department":[{"_id":"731"}],"publication":"FilmZeit – Zeitdimensionen des Films.","author":[{"id":"94407","last_name":"Eckel","full_name":"Eckel, Julia","orcid":"0000-0001-5352-9715","first_name":"Julia"}],"publisher":"Schüren","date_created":"2023-05-04T08:05:09Z","status":"public","editor":[{"last_name":"Kreuzer","full_name":"Kreuzer, Stefanie","first_name":"Stefanie"}],"place":"Marburg","extern":"1","user_id":"21240","title":"Zeitliche Komplexität im Film"},{"_id":"24383","date_updated":"2023-05-05T10:10:02Z","language":[{"iso":"eng"}],"type":"journal_article","citation":{"ieee":"A. Wübbeke et al., “Effect of nucleating additives on short- and long-term tensile strength and residual stresses of welded polypropylene samples ,” Polymers, 2021.","short":"A. Wübbeke, V. Schöppner, T. Arndt, J.-O. Maras, M. Fitze, C. Moltzahn, T. Wu, T. Niendorf, Polymers (2021).","mla":"Wübbeke, Andrea, et al. “Effect of Nucleating Additives on Short- and Long-Term Tensile Strength and Residual Stresses of Welded Polypropylene Samples .” Polymers, MDPI, 2021.","bibtex":"@article{Wübbeke_Schöppner_Arndt_Maras_Fitze_Moltzahn_Wu_Niendorf_2021, title={Effect of nucleating additives on short- and long-term tensile strength and residual stresses of welded polypropylene samples }, journal={Polymers}, publisher={MDPI}, author={Wübbeke, Andrea and Schöppner, Volker and Arndt, Theresa and Maras, Jan-Ole and Fitze, Marcus and Moltzahn, Christian and Wu, Tao and Niendorf, Thomas}, year={2021} }","ama":"Wübbeke A, Schöppner V, Arndt T, et al. Effect of nucleating additives on short- and long-term tensile strength and residual stresses of welded polypropylene samples . Polymers. Published online 2021.","apa":"Wübbeke, A., Schöppner, V., Arndt, T., Maras, J.-O., Fitze, M., Moltzahn, C., Wu, T., & Niendorf, T. (2021). Effect of nucleating additives on short- and long-term tensile strength and residual stresses of welded polypropylene samples . Polymers.","chicago":"Wübbeke, Andrea, Volker Schöppner, Theresa Arndt, Jan-Ole Maras, Marcus Fitze, Christian Moltzahn, Tao Wu, and Thomas Niendorf. “Effect of Nucleating Additives on Short- and Long-Term Tensile Strength and Residual Stresses of Welded Polypropylene Samples .” Polymers, 2021."},"year":"2021","user_id":"14931","title":"Effect of nucleating additives on short- and long-term tensile strength and residual stresses of welded polypropylene samples ","date_created":"2021-09-14T11:43:55Z","status":"public","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"publication":"Polymers","publisher":"MDPI","author":[{"last_name":"Wübbeke","id":"12504","first_name":"Andrea","full_name":"Wübbeke, Andrea"},{"first_name":"Volker","full_name":"Schöppner, Volker","last_name":"Schöppner","id":"20530"},{"last_name":"Arndt","id":"45302","first_name":"Theresa","full_name":"Arndt, Theresa"},{"last_name":"Maras","full_name":"Maras, Jan-Ole","first_name":"Jan-Ole"},{"last_name":"Fitze","first_name":"Marcus ","full_name":"Fitze, Marcus "},{"last_name":"Moltzahn","first_name":"Christian ","full_name":"Moltzahn, Christian "},{"last_name":"Wu","first_name":"Tao","full_name":"Wu, Tao"},{"first_name":"Thomas","full_name":"Niendorf, Thomas","last_name":"Niendorf"}]},{"_id":"37632","date_updated":"2023-05-05T10:06:43Z","language":[{"iso":"eng"}],"year":"2021","type":"dissertation","citation":{"ieee":"A. Wübbeke, Prozess-Struktur-Eigenschaftsbeziehung beim Heizelementschweißen von Polypropylen. 2021.","short":"A. Wübbeke, Prozess-Struktur-Eigenschaftsbeziehung Beim Heizelementschweißen von Polypropylen, 2021.","bibtex":"@book{Wübbeke_2021, title={Prozess-Struktur-Eigenschaftsbeziehung beim Heizelementschweißen von Polypropylen}, author={Wübbeke, Andrea}, year={2021} }","mla":"Wübbeke, Andrea. Prozess-Struktur-Eigenschaftsbeziehung Beim Heizelementschweißen von Polypropylen. 2021.","chicago":"Wübbeke, Andrea. Prozess-Struktur-Eigenschaftsbeziehung Beim Heizelementschweißen von Polypropylen, 2021.","ama":"Wübbeke A. Prozess-Struktur-Eigenschaftsbeziehung Beim Heizelementschweißen von Polypropylen.; 2021.","apa":"Wübbeke, A. (2021). Prozess-Struktur-Eigenschaftsbeziehung beim Heizelementschweißen von Polypropylen."},"user_id":"14931","title":"Prozess-Struktur-Eigenschaftsbeziehung beim Heizelementschweißen von Polypropylen","author":[{"id":"12504","last_name":"Wübbeke","full_name":"Wübbeke, Andrea","first_name":"Andrea"}],"department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"status":"public","date_created":"2023-01-20T07:03:01Z"},{"doi":"10.1007/978-3-030-75381-8_160","_id":"30296","date_updated":"2023-05-05T11:06:07Z","conference":{"end_date":"2021.07.30","location":"Virtual Event","start_date":"2021.07.25","name":"The 13th International Conference on the Technology of Plasticity (ICTP 2021)"},"type":"book_chapter","citation":{"bibtex":"@inbook{Wiens_Homberg_Arian_Möhring_Walther_2021, place={Cham}, title={Forming of Parts with Locally Defined Mechanical and Ferromagnetic Properties by Flow-Forming}, DOI={10.1007/978-3-030-75381-8_160}, booktitle={Forming the Future}, publisher={Springer International Publishing}, author={Wiens, Eugen and Homberg, Werner and Arian, Bahman and Möhring, Kerstin and Walther, Frank}, year={2021} }","mla":"Wiens, Eugen, et al. “Forming of Parts with Locally Defined Mechanical and Ferromagnetic Properties by Flow-Forming.” Forming the Future, Springer International Publishing, 2021, doi:10.1007/978-3-030-75381-8_160.","chicago":"Wiens, Eugen, Werner Homberg, Bahman Arian, Kerstin Möhring, and Frank Walther. “Forming of Parts with Locally Defined Mechanical and Ferromagnetic Properties by Flow-Forming.” In Forming the Future. Cham: Springer International Publishing, 2021. https://doi.org/10.1007/978-3-030-75381-8_160.","apa":"Wiens, E., Homberg, W., Arian, B., Möhring, K., & Walther, F. (2021). Forming of Parts with Locally Defined Mechanical and Ferromagnetic Properties by Flow-Forming. In Forming the Future. The 13th International Conference on the Technology of Plasticity (ICTP 2021), Virtual Event. Springer International Publishing. https://doi.org/10.1007/978-3-030-75381-8_160","ama":"Wiens E, Homberg W, Arian B, Möhring K, Walther F. Forming of Parts with Locally Defined Mechanical and Ferromagnetic Properties by Flow-Forming. In: Forming the Future. Springer International Publishing; 2021. doi:10.1007/978-3-030-75381-8_160","ieee":"E. Wiens, W. Homberg, B. Arian, K. Möhring, and F. Walther, “Forming of Parts with Locally Defined Mechanical and Ferromagnetic Properties by Flow-Forming,” in Forming the Future, Cham: Springer International Publishing, 2021.","short":"E. Wiens, W. Homberg, B. Arian, K. Möhring, F. Walther, in: Forming the Future, Springer International Publishing, Cham, 2021."},"year":"2021","language":[{"iso":"eng"}],"title":"Forming of Parts with Locally Defined Mechanical and Ferromagnetic Properties by Flow-Forming","user_id":"7888","place":"Cham","publication_identifier":{"issn":["2367-1181","2367-1696"],"isbn":["9783030753801","9783030753818"]},"publication_status":"published","status":"public","date_created":"2022-03-15T10:42:31Z","publisher":"Springer International Publishing","author":[{"full_name":"Wiens, Eugen","first_name":"Eugen","id":"7888","last_name":"Wiens"},{"last_name":"Homberg","id":"233","first_name":"Werner","full_name":"Homberg, Werner"},{"first_name":"Bahman","full_name":"Arian, Bahman","last_name":"Arian","id":"36287"},{"last_name":"Möhring","first_name":"Kerstin","full_name":"Möhring, Kerstin"},{"full_name":"Walther, Frank","first_name":"Frank","last_name":"Walther"}],"quality_controlled":"1","publication":"Forming the Future","department":[{"_id":"156"}]},{"date_updated":"2023-05-05T11:08:54Z","doi":"10.1016/j.jajp.2021.100060","language":[{"iso":"eng"}],"title":"Joining with versatile joining elements formed by friction spinning","department":[{"_id":"9"},{"_id":"630"},{"_id":"156"}],"publication_identifier":{"issn":["2666-3309"]},"publication_status":"published","project":[{"_id":"130","name":"TRR 285: TRR 285","grant_number":"418701707"},{"_id":"133","name":"TRR 285 - C: TRR 285 - Project Area C"},{"name":"TRR 285 – C03: TRR 285 - Subproject C03","_id":"147"}],"intvolume":" 3","_id":"26082","article_number":"100060","year":"2021","citation":{"ama":"Wischer C, Wiens E, Homberg W. Joining with versatile joining elements formed by friction spinning. Journal of Advanced Joining Processes. 2021;3. doi:10.1016/j.jajp.2021.100060","apa":"Wischer, C., Wiens, E., & Homberg, W. (2021). Joining with versatile joining elements formed by friction spinning. Journal of Advanced Joining Processes, 3, Article 100060. https://doi.org/10.1016/j.jajp.2021.100060","chicago":"Wischer, Christian, Eugen Wiens, and Werner Homberg. “Joining with Versatile Joining Elements Formed by Friction Spinning.” Journal of Advanced Joining Processes 3 (2021). https://doi.org/10.1016/j.jajp.2021.100060.","bibtex":"@article{Wischer_Wiens_Homberg_2021, title={Joining with versatile joining elements formed by friction spinning}, volume={3}, DOI={10.1016/j.jajp.2021.100060}, number={100060}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier}, author={Wischer, Christian and Wiens, Eugen and Homberg, Werner}, year={2021} }","mla":"Wischer, Christian, et al. “Joining with Versatile Joining Elements Formed by Friction Spinning.” Journal of Advanced Joining Processes, vol. 3, 100060, Elsevier, 2021, doi:10.1016/j.jajp.2021.100060.","short":"C. Wischer, E. Wiens, W. Homberg, Journal of Advanced Joining Processes 3 (2021).","ieee":"C. Wischer, E. Wiens, and W. Homberg, “Joining with versatile joining elements formed by friction spinning,” Journal of Advanced Joining Processes, vol. 3, Art. no. 100060, 2021, doi: 10.1016/j.jajp.2021.100060."},"type":"journal_article","user_id":"7888","publication":"Journal of Advanced Joining Processes","quality_controlled":"1","author":[{"id":"72219","last_name":"Wischer","full_name":"Wischer, Christian","first_name":"Christian"},{"last_name":"Wiens","id":"7888","first_name":"Eugen","full_name":"Wiens, Eugen"},{"full_name":"Homberg, Werner","first_name":"Werner","id":"233","last_name":"Homberg"}],"publisher":"Elsevier","volume":3,"date_created":"2021-10-12T11:55:27Z","status":"public"},{"language":[{"iso":"eng"}],"type":"conference_editor","citation":{"chicago":"Wiens, Eugen, Christian Wischer, and Werner Homberg, eds. Development of a Novel Adaptive Joining Technology Employing Friction-Spun Joint Connectors (FSJC), 2021. https://doi.org/10.25518/esaform21.4682.","ama":"Wiens E, Wischer C, Homberg W, eds. Development of a Novel Adaptive Joining Technology Employing Friction-Spun Joint Connectors (FSJC).; 2021. doi:10.25518/esaform21.4682","apa":"Wiens, E., Wischer, C., & Homberg, W. (Eds.). (2021). Development of a novel adaptive joining technology employing Friction-Spun Joint Connectors (FSJC). https://doi.org/10.25518/esaform21.4682","bibtex":"@book{Wiens_Wischer_Homberg_2021, title={Development of a novel adaptive joining technology employing Friction-Spun Joint Connectors (FSJC)}, DOI={10.25518/esaform21.4682}, year={2021} }","mla":"Wiens, Eugen, et al., editors. Development of a Novel Adaptive Joining Technology Employing Friction-Spun Joint Connectors (FSJC). 2021, doi:10.25518/esaform21.4682.","short":"E. Wiens, C. Wischer, W. Homberg, eds., Development of a Novel Adaptive Joining Technology Employing Friction-Spun Joint Connectors (FSJC), 2021.","ieee":"E. Wiens, C. Wischer, and W. Homberg, Eds., Development of a novel adaptive joining technology employing Friction-Spun Joint Connectors (FSJC). 2021."},"year":"2021","conference":{"name":"ESAFORM 2021"},"date_updated":"2023-05-05T11:21:24Z","_id":"22453","doi":"10.25518/esaform21.4682","department":[{"_id":"156"}],"quality_controlled":"1","date_created":"2021-06-16T07:23:51Z","status":"public","editor":[{"full_name":"Wiens, Eugen","first_name":"Eugen","id":"7888","last_name":"Wiens"},{"id":"72219","last_name":"Wischer","full_name":"Wischer, Christian","first_name":"Christian"},{"full_name":"Homberg, Werner","first_name":"Werner","id":"233","last_name":"Homberg"}],"user_id":"7888","title":"Development of a novel adaptive joining technology employing Friction-Spun Joint Connectors (FSJC)"},{"page":"164-177","year":"2021","type":"journal_article","citation":{"chicago":"Neumann, Phillip, Sandra Grüter, Lisa Eckel, Birgit Lütje-Klose, Elke Wild, and Julia Gorges. “Aufgaben und Zuständigkeiten von allgemeinen und sonderpädagogischen Lehrkräften sowie Fachkräften der Schulsozialarbeit in inklusiven Schulen der Sekundarstufe I. Erste Ergebnisse aus dem BiFoKi-Projekt.” Zeitschrift für Heilpädagogik 73, no. 4 (2021): 164–77.","ama":"Neumann P, Grüter S, Eckel L, Lütje-Klose B, Wild E, Gorges J. Aufgaben und Zuständigkeiten von allgemeinen und sonderpädagogischen Lehrkräften sowie Fachkräften der Schulsozialarbeit in inklusiven Schulen der Sekundarstufe I. Erste Ergebnisse aus dem BiFoKi-Projekt. Zeitschrift für Heilpädagogik. 2021;73(4):164-177.","apa":"Neumann, P., Grüter, S., Eckel, L., Lütje-Klose, B., Wild, E., & Gorges, J. (2021). Aufgaben und Zuständigkeiten von allgemeinen und sonderpädagogischen Lehrkräften sowie Fachkräften der Schulsozialarbeit in inklusiven Schulen der Sekundarstufe I. Erste Ergebnisse aus dem BiFoKi-Projekt. Zeitschrift für Heilpädagogik, 73(4), 164–177.","mla":"Neumann, Phillip, et al. “Aufgaben und Zuständigkeiten von allgemeinen und sonderpädagogischen Lehrkräften sowie Fachkräften der Schulsozialarbeit in inklusiven Schulen der Sekundarstufe I. Erste Ergebnisse aus dem BiFoKi-Projekt.” Zeitschrift für Heilpädagogik, vol. 73, no. 4, 2021, pp. 164–77.","bibtex":"@article{Neumann_Grüter_Eckel_Lütje-Klose_Wild_Gorges_2021, title={Aufgaben und Zuständigkeiten von allgemeinen und sonderpädagogischen Lehrkräften sowie Fachkräften der Schulsozialarbeit in inklusiven Schulen der Sekundarstufe I. Erste Ergebnisse aus dem BiFoKi-Projekt}, volume={73}, number={4}, journal={Zeitschrift für Heilpädagogik}, author={Neumann, Phillip and Grüter, Sandra and Eckel, Lisa and Lütje-Klose, Birgit and Wild, Elke and Gorges, Julia}, year={2021}, pages={164–177} }","short":"P. Neumann, S. Grüter, L. Eckel, B. Lütje-Klose, E. Wild, J. Gorges, Zeitschrift für Heilpädagogik 73 (2021) 164–177.","ieee":"P. Neumann, S. Grüter, L. Eckel, B. Lütje-Klose, E. Wild, and J. Gorges, “Aufgaben und Zuständigkeiten von allgemeinen und sonderpädagogischen Lehrkräften sowie Fachkräften der Schulsozialarbeit in inklusiven Schulen der Sekundarstufe I. Erste Ergebnisse aus dem BiFoKi-Projekt,” Zeitschrift für Heilpädagogik, vol. 73, no. 4, pp. 164–177, 2021."},"intvolume":" 73","_id":"34484","issue":"4","file_date_updated":"2023-05-05T19:52:14Z","publication":"Zeitschrift für Heilpädagogik","keyword":["Inklusion","Sonderpädagogik","Sekundarstufe","Gesamtschulen","Kooperation","Schulsozialarbeit","BiFoKi"],"author":[{"last_name":"Neumann","id":"95559","first_name":"Phillip","full_name":"Neumann, Phillip"},{"first_name":"Sandra","full_name":"Grüter, Sandra","last_name":"Grüter"},{"full_name":"Eckel, Lisa","first_name":"Lisa","last_name":"Eckel"},{"last_name":"Lütje-Klose","full_name":"Lütje-Klose, Birgit","first_name":"Birgit"},{"last_name":"Wild","first_name":"Elke","full_name":"Wild, Elke"},{"first_name":"Julia","full_name":"Gorges, Julia","last_name":"Gorges"}],"file":[{"date_created":"2022-12-20T13:10:15Z","file_name":"zfh_04.2021_neumann.pdf","access_level":"open_access","file_id":"34609","creator":"bpaulina","file_size":369937,"relation":"main_file","content_type":"application/pdf","date_updated":"2023-05-05T19:52:14Z"}],"volume":73,"date_created":"2022-12-17T12:11:42Z","has_accepted_license":"1","status":"public","extern":"1","abstract":[{"lang":"ger","text":"Multiprofessionelle Teams sind notwendiger Bestandteil inklusiver Schulen. Die Verteilung von Aufgaben, welche über die Zusammenarbeit von allgemeinen und sonderpädagogischen Lehrkräften im Unterricht hinausgehen, wurde bislang jedoch selten systematisch untersucht. Im Beitrag werden deskriptive Befunde aus dem Projekt BiFoKi (Bielefelder Fortbildungskonzept zur Kooperation in inklusiven Schulen) zu den Zuständigkeiten von allgemeinen (N = 170) und sonderpädagogischen Lehrkräften (N = 24) sowie Schulsozialarbeiterinnen (N = 11) an inklusiven Sekundar- und Gesamtschulen präsentiert. Sie deuten auf eine Persistenz traditioneller Rollenmuster und Aufgabenverteilungen hin. Bei den befragten sonderpädagogischen Lehrkräften können zwei unterschiedliche Rollenmuster herausgearbeitet werden. Die Schulsozialarbeiterinnen weisen ein enges Arbeitsfeld mit einem Fokus auf Eltern-Schule-Kooperation auf.\r\n"},{"lang":"eng","text":"Multiprofessional teams are a vital part of inclusive schools. However, the distribution of tasks that goes beyond the cooperation of teachers and special educators in the classroom has rarely been investigated systematically. This article presents preliminary findings from the BiFoKi project (Bielefeld Training on Co operation in inclusive Schools) on the responsibilities of general teachers (N = 170), special educators (N = 24) and school social workers (N = 11) in inclusive secondary and comprehensive schools. They indicate the persistence of traditional role patterns and task distributions between these three groups. Two different roles of special educators can be identified. The school social workers have a particularly narrow field of work with a focus on parent school cooperation."}],"article_type":"original","ddc":["370"],"user_id":"95559","language":[{"iso":"ger"}],"date_updated":"2023-05-05T19:52:14Z","oa":"1","department":[{"_id":"479"}],"publication_status":"published","publication_identifier":{"issn":["0513-9066"]},"title":"Aufgaben und Zuständigkeiten von allgemeinen und sonderpädagogischen Lehrkräften sowie Fachkräften der Schulsozialarbeit in inklusiven Schulen der Sekundarstufe I. Erste Ergebnisse aus dem BiFoKi-Projekt"},{"extern":"1","place":"Ostfildern","title":"Wirtschaft ist Care ist radikale Demokratie","user_id":"99082","publisher":"Matthias-Grünewald-Verlag","author":[{"full_name":"Tecklenburg, Feline","orcid":"0000-0002-7155-9341","first_name":"Feline","id":"99082","last_name":"Tecklenburg"}],"department":[{"_id":"35"},{"_id":"17"},{"_id":"22"},{"_id":"394"}],"publication":"Dass die Welt wohnlich für alle wird. Klartexte, Anfragen, Perspektiven. Ina Praetorius zum 65. Geburtstag","editor":[{"first_name":"Hans Jörg","full_name":"Fehle, Hans Jörg","last_name":"Fehle"},{"full_name":"Langenbacher, Andrea","first_name":"Andrea","last_name":"Langenbacher"}],"publication_status":"published","publication_identifier":{"unknown":["9783786732556"]},"status":"public","date_created":"2023-05-05T16:37:53Z","date_updated":"2023-05-05T16:51:35Z","_id":"44526","year":"2021","type":"book_chapter","citation":{"ieee":"F. Tecklenburg, “Wirtschaft ist Care ist radikale Demokratie,” in Dass die Welt wohnlich für alle wird. Klartexte, Anfragen, Perspektiven. Ina Praetorius zum 65. Geburtstag, H. J. Fehle and A. Langenbacher, Eds. Ostfildern: Matthias-Grünewald-Verlag, 2021.","short":"F. Tecklenburg, in: H.J. Fehle, A. Langenbacher (Eds.), Dass die Welt wohnlich für alle wird. Klartexte, Anfragen, Perspektiven. Ina Praetorius zum 65. Geburtstag, Matthias-Grünewald-Verlag, Ostfildern, 2021.","mla":"Tecklenburg, Feline. “Wirtschaft ist Care ist radikale Demokratie.” Dass die Welt wohnlich für alle wird. Klartexte, Anfragen, Perspektiven. Ina Praetorius zum 65. Geburtstag, edited by Hans Jörg Fehle and Andrea Langenbacher, Matthias-Grünewald-Verlag, 2021.","bibtex":"@inbook{Tecklenburg_2021, place={Ostfildern}, title={Wirtschaft ist Care ist radikale Demokratie}, booktitle={Dass die Welt wohnlich für alle wird. Klartexte, Anfragen, Perspektiven. Ina Praetorius zum 65. Geburtstag}, publisher={Matthias-Grünewald-Verlag}, author={Tecklenburg, Feline}, editor={Fehle, Hans Jörg and Langenbacher, Andrea}, year={2021} }","chicago":"Tecklenburg, Feline. “Wirtschaft ist Care ist radikale Demokratie.” In Dass die Welt wohnlich für alle wird. Klartexte, Anfragen, Perspektiven. Ina Praetorius zum 65. Geburtstag, edited by Hans Jörg Fehle and Andrea Langenbacher. Ostfildern: Matthias-Grünewald-Verlag, 2021.","ama":"Tecklenburg F. Wirtschaft ist Care ist radikale Demokratie. In: Fehle HJ, Langenbacher A, eds. Dass die Welt wohnlich für alle wird. Klartexte, Anfragen, Perspektiven. Ina Praetorius zum 65. Geburtstag. Matthias-Grünewald-Verlag; 2021.","apa":"Tecklenburg, F. (2021). Wirtschaft ist Care ist radikale Demokratie. In H. J. Fehle & A. Langenbacher (Eds.), Dass die Welt wohnlich für alle wird. Klartexte, Anfragen, Perspektiven. Ina Praetorius zum 65. Geburtstag. Matthias-Grünewald-Verlag."},"language":[{"iso":"ger"}]},{"title":"Algebraic geometry of Lie bialgebras defined by solutions of the classical Yang-Baxter equation","user_id":"49063","abstract":[{"text":"This paper is devoted to algebro-geometric study of infinite dimensional Lie bialgebras, which arise from solutions of the classical Yang–Baxter equation. We regard trigonometric solutions of this equation as twists of the standard Lie bialgebra cobracket on an appropriate affine Lie algebra and work out the corresponding theory of Manin triples, putting it into an algebro-geometric context. As a consequence of this approach, we prove that any trigonometric solution of the classical Yang–Baxter equation arises from an appropriate algebro-geometric datum. The developed theory is illustrated by some concrete examples.","lang":"eng"}],"publication_status":"published","volume":387,"status":"public","date_created":"2023-05-02T18:36:54Z","author":[{"id":"72064","last_name":"Burban","full_name":"Burban, Igor","first_name":"Igor"},{"full_name":"Abedin, R.","first_name":"R.","last_name":"Abedin"}],"department":[{"_id":"602"}],"publication":"Communications in Mathematical Physics","doi":"10.1007/s00220-021-04188-7","issue":"2","date_updated":"2023-05-07T01:35:11Z","_id":"44329","intvolume":" 387","citation":{"mla":"Burban, Igor, and R. Abedin. “Algebraic Geometry of Lie Bialgebras Defined by Solutions of the Classical Yang-Baxter Equation.” Communications in Mathematical Physics, vol. 387, no. 2, 2021, pp. 1051–1109, doi:10.1007/s00220-021-04188-7.","bibtex":"@article{Burban_Abedin_2021, title={Algebraic geometry of Lie bialgebras defined by solutions of the classical Yang-Baxter equation}, volume={387}, DOI={10.1007/s00220-021-04188-7}, number={2}, journal={Communications in Mathematical Physics}, author={Burban, Igor and Abedin, R.}, year={2021}, pages={1051–1109} }","ama":"Burban I, Abedin R. Algebraic geometry of Lie bialgebras defined by solutions of the classical Yang-Baxter equation. Communications in Mathematical Physics. 2021;387(2):1051–1109. doi:10.1007/s00220-021-04188-7","apa":"Burban, I., & Abedin, R. (2021). Algebraic geometry of Lie bialgebras defined by solutions of the classical Yang-Baxter equation. Communications in Mathematical Physics, 387(2), 1051–1109. https://doi.org/10.1007/s00220-021-04188-7","chicago":"Burban, Igor, and R. Abedin. “Algebraic Geometry of Lie Bialgebras Defined by Solutions of the Classical Yang-Baxter Equation.” Communications in Mathematical Physics 387, no. 2 (2021): 1051–1109. https://doi.org/10.1007/s00220-021-04188-7.","ieee":"I. Burban and R. Abedin, “Algebraic geometry of Lie bialgebras defined by solutions of the classical Yang-Baxter equation,” Communications in Mathematical Physics, vol. 387, no. 2, pp. 1051–1109, 2021, doi: 10.1007/s00220-021-04188-7.","short":"I. Burban, R. Abedin, Communications in Mathematical Physics 387 (2021) 1051–1109."},"year":"2021","type":"journal_article","page":"1051–1109","language":[{"iso":"eng"}]},{"_id":"44546","date_updated":"2023-05-07T13:37:33Z","language":[{"iso":"ger"}],"year":"2021","type":"book","citation":{"short":"R. Adelmann, Listen und Rankings. Über Taxonomien des Populären, Transcript, Bielefeld, 2021.","ieee":"R. Adelmann, Listen und Rankings. Über Taxonomien des Populären. Bielefeld: Transcript, 2021.","ama":"Adelmann R. Listen und Rankings. Über Taxonomien des Populären. Transcript; 2021.","apa":"Adelmann, R. (2021). Listen und Rankings. Über Taxonomien des Populären. Transcript.","chicago":"Adelmann, Ralf. Listen und Rankings. Über Taxonomien des Populären. Bielefeld: Transcript, 2021.","bibtex":"@book{Adelmann_2021, place={Bielefeld}, title={Listen und Rankings. Über Taxonomien des Populären}, publisher={Transcript}, author={Adelmann, Ralf}, year={2021} }","mla":"Adelmann, Ralf. Listen und Rankings. Über Taxonomien des Populären. Transcript, 2021."},"user_id":"49063","title":"Listen und Rankings. Über Taxonomien des Populären","place":"Bielefeld","date_created":"2023-05-07T13:01:49Z","status":"public","publication_status":"published","department":[{"_id":"656"}],"publisher":"Transcript","author":[{"full_name":"Adelmann, Ralf","first_name":"Ralf","id":"1","last_name":"Adelmann"}]},{"department":[{"_id":"427"},{"_id":"462"}],"publisher":"Hogrefe","author":[{"first_name":"Heike M.","full_name":"Buhl, Heike M.","last_name":"Buhl","id":"27152"},{"last_name":"Bonanati","first_name":"Sabrina","full_name":"Bonanati, Sabrina"},{"id":"40387","last_name":"Eickelmann","full_name":"Eickelmann, Birgit","first_name":"Birgit"}],"date_created":"2022-08-02T09:20:36Z","status":"public","publication_identifier":{"isbn":["978-3-8017-3074-1"]},"publication_status":"published","place":"Göttingen","user_id":"14931","title":"Schule in der digitalen Welt","series_title":"Psychologie im Schulalltag","language":[{"iso":"ger"}],"page":"150","type":"book","year":"2021","citation":{"ieee":"H. M. Buhl, S. Bonanati, and B. Eickelmann, Schule in der digitalen Welt. Göttingen: Hogrefe, 2021.","short":"H.M. Buhl, S. Bonanati, B. Eickelmann, Schule in der digitalen Welt, Hogrefe, Göttingen, 2021.","bibtex":"@book{Buhl_Bonanati_Eickelmann_2021, place={Göttingen}, series={Psychologie im Schulalltag}, title={Schule in der digitalen Welt}, publisher={Hogrefe}, author={Buhl, Heike M. and Bonanati, Sabrina and Eickelmann, Birgit}, year={2021}, collection={Psychologie im Schulalltag} }","mla":"Buhl, Heike M., et al. Schule in der digitalen Welt. Hogrefe, 2021.","chicago":"Buhl, Heike M., Sabrina Bonanati, and Birgit Eickelmann. Schule in der digitalen Welt. Psychologie im Schulalltag. Göttingen: Hogrefe, 2021.","apa":"Buhl, H. M., Bonanati, S., & Eickelmann, B. (2021). Schule in der digitalen Welt. Hogrefe.","ama":"Buhl HM, Bonanati S, Eickelmann B. Schule in der digitalen Welt. Hogrefe; 2021."},"_id":"32464","date_updated":"2023-05-08T09:05:41Z"},{"_id":"44678","date_updated":"2023-05-09T11:25:11Z","corporate_editor":["Deutsches Goethe-Institut "],"language":[{"iso":"ger"}],"citation":{"ama":"Eickelmann B. Digitale Schultransformation ganzheitlich gestalten. In: Deutsches Goethe-Institut , ed. Remote Schools. Schulisches Distanzlernen in und nach der Corona-Pandemie. Deutsches Goethe-Institut Bulgarien ; 2021:32-36.","apa":"Eickelmann, B. (2021). Digitale Schultransformation ganzheitlich gestalten. In Deutsches Goethe-Institut (Ed.), Remote Schools. Schulisches Distanzlernen in und nach der Corona-Pandemie. (pp. 32–36). Deutsches Goethe-Institut Bulgarien .","chicago":"Eickelmann, Birgit. “Digitale Schultransformation ganzheitlich gestalten.” In Remote Schools. Schulisches Distanzlernen in und nach der Corona-Pandemie., edited by Deutsches Goethe-Institut , 32–36. Sofia: Deutsches Goethe-Institut Bulgarien , 2021.","bibtex":"@inbook{Eickelmann_2021, place={Sofia}, title={Digitale Schultransformation ganzheitlich gestalten}, booktitle={Remote Schools. Schulisches Distanzlernen in und nach der Corona-Pandemie.}, publisher={Deutsches Goethe-Institut Bulgarien }, author={Eickelmann, Birgit}, editor={Deutsches Goethe-Institut }, year={2021}, pages={32–36} }","mla":"Eickelmann, Birgit. “Digitale Schultransformation ganzheitlich gestalten.” Remote Schools. Schulisches Distanzlernen in und nach der Corona-Pandemie., edited by Deutsches Goethe-Institut , Deutsches Goethe-Institut Bulgarien , 2021, pp. 32–36.","short":"B. Eickelmann, in: Deutsches Goethe-Institut (Ed.), Remote Schools. Schulisches Distanzlernen in und nach der Corona-Pandemie., Deutsches Goethe-Institut Bulgarien , Sofia, 2021, pp. 32–36.","ieee":"B. Eickelmann, “Digitale Schultransformation ganzheitlich gestalten,” in Remote Schools. Schulisches Distanzlernen in und nach der Corona-Pandemie., Deutsches Goethe-Institut , Ed. Sofia: Deutsches Goethe-Institut Bulgarien , 2021, pp. 32–36."},"type":"book_chapter","year":"2021","page":"32-36","place":"Sofia","user_id":"21240","title":"Digitale Schultransformation ganzheitlich gestalten","publisher":"Deutsches Goethe-Institut Bulgarien ","author":[{"full_name":"Eickelmann, Birgit","first_name":"Birgit","id":"40387","last_name":"Eickelmann"}],"department":[{"_id":"462"}],"publication":"Remote Schools. Schulisches Distanzlernen in und nach der Corona-Pandemie.","status":"public","date_created":"2023-05-09T11:25:08Z"},{"main_file_link":[{"url":"https://library.fes.de/pdf-files/a-p-b/17249.pdf"}],"language":[{"iso":"ger"}],"year":"2021","citation":{"bibtex":"@book{Eickelmann_2021, title={Lehren aus der Pandemie: Gleiche Chancen für alle Kinder und Jugendlichen sichern. Stellungnahme der Expert*innenkommission der Friedrich-Ebert-Stiftung}, author={Eickelmann, Birgit}, year={2021} }","mla":"Eickelmann, Birgit. Lehren aus der Pandemie: Gleiche Chancen für alle Kinder und Jugendlichen sichern. Stellungnahme der Expert*innenkommission der Friedrich-Ebert-Stiftung. 2021.","apa":"Eickelmann, B. (2021). Lehren aus der Pandemie: Gleiche Chancen für alle Kinder und Jugendlichen sichern. Stellungnahme der Expert*innenkommission der Friedrich-Ebert-Stiftung.","ama":"Eickelmann B. Lehren aus der Pandemie: Gleiche Chancen für alle Kinder und Jugendlichen sichern. Stellungnahme der Expert*innenkommission der Friedrich-Ebert-Stiftung.; 2021.","chicago":"Eickelmann, Birgit. Lehren aus der Pandemie: Gleiche Chancen für alle Kinder und Jugendlichen sichern. Stellungnahme der Expert*innenkommission der Friedrich-Ebert-Stiftung, 2021.","ieee":"B. Eickelmann, Lehren aus der Pandemie: Gleiche Chancen für alle Kinder und Jugendlichen sichern. Stellungnahme der Expert*innenkommission der Friedrich-Ebert-Stiftung. 2021.","short":"B. Eickelmann, Lehren aus der Pandemie: Gleiche Chancen für alle Kinder und Jugendlichen sichern. Stellungnahme der Expert*innenkommission der Friedrich-Ebert-Stiftung, 2021."},"type":"report","date_updated":"2023-05-09T11:41:14Z","_id":"44680","department":[{"_id":"462"}],"author":[{"last_name":"Eickelmann","id":"40387","first_name":"Birgit","full_name":"Eickelmann, Birgit"}],"date_created":"2023-05-09T11:34:52Z","status":"public","user_id":"21240","title":"Lehren aus der Pandemie: Gleiche Chancen für alle Kinder und Jugendlichen sichern. Stellungnahme der Expert*innenkommission der Friedrich-Ebert-Stiftung"},{"quality_controlled":"1","author":[{"last_name":"Gräßler","id":"47565","first_name":"Iris","full_name":"Gräßler, Iris","orcid":"0000-0001-5765-971X"},{"id":"67161","last_name":"Wiechel","full_name":"Wiechel, Dominik","first_name":"Dominik"}],"department":[{"_id":"152"}],"publication":"DS 111: Proceedings of the 32nd Symposium Design for X","keyword":["Engineering Change Management","Impact Analysis","Engineering Changes","Model-based Systems Engineering","Product Developmen"],"status":"public","date_created":"2021-09-13T14:45:10Z","editor":[{"last_name":"Krause","full_name":"Krause, Dieter","first_name":"Dieter"},{"last_name":"Paetzold","first_name":"Kristin","full_name":"Paetzold, Kristin"},{"full_name":"Wartzack, Sandro","first_name":"Sandro","last_name":"Wartzack"}],"publication_status":"published","abstract":[{"text":"Challenges in decisions on technical changes are the lack of knowledge about the expected impact and change propagation. Currently, no literature study contains a systematic differentiation and evaluation of existing approaches, which is a prerequisite for practitioners to select a suitable approach. This research aims at defining differentiation criteria as well as generally applicable requirements for evaluation. A four-step approach is used: systematic literature review on approaches for impact analysis of engineering changes (1), categorization and prioritization of approaches based on reoccuring elements (2), derivation of context specific requirements for evaluation (3), and evaluation of approaches (4). The result indicates existing potential of object-oriented modeling approaches.","lang":"eng"}],"user_id":"67161","title":"Systematische Bewertung von Auswirkungsanalysen des Engineering Change Managements","language":[{"iso":"eng"}],"type":"conference","year":"2021","citation":{"bibtex":"@inproceedings{Gräßler_Wiechel_2021, title={Systematische Bewertung von Auswirkungsanalysen des Engineering Change Managements}, DOI={10.35199/dfx2021.12}, booktitle={DS 111: Proceedings of the 32nd Symposium Design for X}, author={Gräßler, Iris and Wiechel, Dominik}, editor={Krause, Dieter and Paetzold, Kristin and Wartzack, Sandro}, year={2021} }","mla":"Gräßler, Iris, and Dominik Wiechel. “Systematische Bewertung von Auswirkungsanalysen Des Engineering Change Managements.” DS 111: Proceedings of the 32nd Symposium Design for X, edited by Dieter Krause et al., 2021, doi:10.35199/dfx2021.12.","ama":"Gräßler I, Wiechel D. Systematische Bewertung von Auswirkungsanalysen des Engineering Change Managements. In: Krause D, Paetzold K, Wartzack S, eds. DS 111: Proceedings of the 32nd Symposium Design for X. ; 2021. doi:10.35199/dfx2021.12","apa":"Gräßler, I., & Wiechel, D. (2021). Systematische Bewertung von Auswirkungsanalysen des Engineering Change Managements. In D. Krause, K. Paetzold, & S. Wartzack (Eds.), DS 111: Proceedings of the 32nd Symposium Design for X. https://doi.org/10.35199/dfx2021.12","chicago":"Gräßler, Iris, and Dominik Wiechel. “Systematische Bewertung von Auswirkungsanalysen Des Engineering Change Managements.” In DS 111: Proceedings of the 32nd Symposium Design for X, edited by Dieter Krause, Kristin Paetzold, and Sandro Wartzack, 2021. https://doi.org/10.35199/dfx2021.12.","ieee":"I. Gräßler and D. Wiechel, “Systematische Bewertung von Auswirkungsanalysen des Engineering Change Managements,” in DS 111: Proceedings of the 32nd Symposium Design for X, Tutzing, 2021, doi: 10.35199/dfx2021.12.","short":"I. Gräßler, D. Wiechel, in: D. Krause, K. Paetzold, S. Wartzack (Eds.), DS 111: Proceedings of the 32nd Symposium Design for X, 2021."},"date_updated":"2023-05-09T18:22:30Z","_id":"24280","conference":{"name":"Symposium Design for X (DFX2021)","start_date":"27-09-2021","location":"Tutzing","end_date":"28-09-2021"},"doi":"10.35199/dfx2021.12"},{"user_id":"67161","title":"Determine similarity of assembly operations using semantic technology","status":"public","date_created":"2021-10-25T16:38:06Z","publication_status":"published","quality_controlled":"1","author":[{"last_name":"Gräßler","id":"47565","first_name":"Iris","full_name":"Gräßler, Iris","orcid":"0000-0001-5765-971X"},{"full_name":"Roesmann, Daniel","first_name":"Daniel","id":"54680","last_name":"Roesmann"},{"first_name":"Dominik","full_name":"Wiechel, Dominik","last_name":"Wiechel","id":"67161"},{"id":"40253","last_name":"Preuß","full_name":"Preuß, Daniel","first_name":"Daniel"},{"first_name":"Jens","full_name":"Pottebaum, Jens","orcid":"http://orcid.org/0000-0001-8778-2989","last_name":"Pottebaum","id":"405"}],"publication":"54th CIRP Conference on Manufacturing Systems","department":[{"_id":"152"}],"doi":"https://doi.org/10.1016/j.procir.2021.11.209 ","date_updated":"2023-05-09T18:22:08Z","_id":"26866","conference":{"end_date":"2021-09-24","location":"Athens","start_date":"2021-09-22","name":"CIRP CMS 2021 - 54th CIRP Conference on Manufacturing Systems, 2021"},"language":[{"iso":"eng"}],"year":"2021","citation":{"ama":"Gräßler I, Roesmann D, Wiechel D, Preuß D, Pottebaum J. Determine similarity of assembly operations using semantic technology. In: 54th CIRP Conference on Manufacturing Systems. ; 2021. doi:https://doi.org/10.1016/j.procir.2021.11.209 ","apa":"Gräßler, I., Roesmann, D., Wiechel, D., Preuß, D., & Pottebaum, J. (2021). Determine similarity of assembly operations using semantic technology. 54th CIRP Conference on Manufacturing Systems. CIRP CMS 2021 - 54th CIRP Conference on Manufacturing Systems, 2021, Athens. https://doi.org/10.1016/j.procir.2021.11.209 ","chicago":"Gräßler, Iris, Daniel Roesmann, Dominik Wiechel, Daniel Preuß, and Jens Pottebaum. “Determine Similarity of Assembly Operations Using Semantic Technology.” In 54th CIRP Conference on Manufacturing Systems, 2021. https://doi.org/10.1016/j.procir.2021.11.209 .","mla":"Gräßler, Iris, et al. “Determine Similarity of Assembly Operations Using Semantic Technology.” 54th CIRP Conference on Manufacturing Systems, 2021, doi:https://doi.org/10.1016/j.procir.2021.11.209 .","bibtex":"@inproceedings{Gräßler_Roesmann_Wiechel_Preuß_Pottebaum_2021, title={Determine similarity of assembly operations using semantic technology}, DOI={https://doi.org/10.1016/j.procir.2021.11.209 }, booktitle={54th CIRP Conference on Manufacturing Systems}, author={Gräßler, Iris and Roesmann, Daniel and Wiechel, Dominik and Preuß, Daniel and Pottebaum, Jens}, year={2021} }","short":"I. Gräßler, D. Roesmann, D. Wiechel, D. Preuß, J. Pottebaum, in: 54th CIRP Conference on Manufacturing Systems, 2021.","ieee":"I. Gräßler, D. Roesmann, D. Wiechel, D. Preuß, and J. Pottebaum, “Determine similarity of assembly operations using semantic technology,” presented at the CIRP CMS 2021 - 54th CIRP Conference on Manufacturing Systems, 2021, Athens, 2021, doi: https://doi.org/10.1016/j.procir.2021.11.209 ."},"type":"conference"},{"status":"public","date_created":"2021-08-13T07:00:44Z","publisher":" IOP Publishing","quality_controlled":"1","author":[{"first_name":"Iris","full_name":"Gräßler, Iris","orcid":"0000-0001-5765-971X","last_name":"Gräßler","id":"47565"},{"last_name":"Wiechel","id":"67161","first_name":"Dominik","full_name":"Wiechel, Dominik"},{"id":"405","last_name":"Pottebaum","full_name":"Pottebaum, Jens","orcid":"http://orcid.org/0000-0001-8778-2989","first_name":"Jens"}],"publication":"Proceedings of 19th Drive Train Technology Conference (ATK 2021), 9. - 11. Mrz. 2021","department":[{"_id":"152"}],"user_id":"67161","title":"Role model of model-based systems engineering application","language":[{"iso":"eng"}],"year":"2021","citation":{"short":"I. Gräßler, D. Wiechel, J. Pottebaum, in: Proceedings of 19th Drive Train Technology Conference (ATK 2021), 9. - 11. Mrz. 2021, IOP Publishing, 2021.","ieee":"I. Gräßler, D. Wiechel, and J. Pottebaum, “Role model of model-based systems engineering application,” 2021.","chicago":"Gräßler, Iris, Dominik Wiechel, and Jens Pottebaum. “Role Model of Model-Based Systems Engineering Application.” In Proceedings of 19th Drive Train Technology Conference (ATK 2021), 9. - 11. Mrz. 2021. IOP Publishing, 2021.","ama":"Gräßler I, Wiechel D, Pottebaum J. Role model of model-based systems engineering application. In: Proceedings of 19th Drive Train Technology Conference (ATK 2021), 9. - 11. Mrz. 2021. IOP Publishing; 2021.","apa":"Gräßler, I., Wiechel, D., & Pottebaum, J. (2021). Role model of model-based systems engineering application. Proceedings of 19th Drive Train Technology Conference (ATK 2021), 9. - 11. Mrz. 2021.","mla":"Gräßler, Iris, et al. “Role Model of Model-Based Systems Engineering Application.” Proceedings of 19th Drive Train Technology Conference (ATK 2021), 9. - 11. Mrz. 2021, IOP Publishing, 2021.","bibtex":"@inproceedings{Gräßler_Wiechel_Pottebaum_2021, title={Role model of model-based systems engineering application}, booktitle={Proceedings of 19th Drive Train Technology Conference (ATK 2021), 9. - 11. Mrz. 2021}, publisher={ IOP Publishing}, author={Gräßler, Iris and Wiechel, Dominik and Pottebaum, Jens}, year={2021} }"},"type":"conference","main_file_link":[{"url":"doi:10.1088/1757-899X/1097/1/012003"}],"date_updated":"2023-05-09T18:22:40Z","_id":"23392","conference":{"end_date":"2021-03-11","start_date":"2021-03-09"}},{"title":"Éthiques et esthétiques de la Grande Guerre chez des auteurs de la génération des petits-enfants","user_id":"25533","place":"Paris","editor":[{"last_name":"Mecke","first_name":"Jochen","full_name":"Mecke, Jochen"},{"first_name":"Pierre ","full_name":"Schoentjes, Pierre ","last_name":"Schoentjes"},{"first_name":"Anne-Sophie ","full_name":"Donnarieix, Anne-Sophie ","last_name":"Donnarieix"}],"publication_status":"published","status":"public","date_created":"2023-05-09T16:04:24Z","publisher":"Garnier","author":[{"full_name":"Schreckenberg, Stefan","first_name":"Stefan","last_name":"Schreckenberg"}],"publication":"Esthétique de la guerre - Éthique de la paix. Un siècle de littérature sur la Grande Guerre","_id":"44693","date_updated":"2023-05-09T16:05:49Z","year":"2021","citation":{"chicago":"Schreckenberg, Stefan. “Éthiques et esthétiques de la Grande Guerre chez des auteurs de la génération des petits-enfants.” In Esthétique de la guerre - Éthique de la paix. Un siècle de littérature sur la Grande Guerre, edited by Jochen Mecke, Pierre Schoentjes, and Anne-Sophie Donnarieix, 217–32. Paris: Garnier, 2021.","ama":"Schreckenberg S. Éthiques et esthétiques de la Grande Guerre chez des auteurs de la génération des petits-enfants. In: Mecke J, Schoentjes P, Donnarieix A-S, eds. Esthétique de la guerre - Éthique de la paix. Un siècle de littérature sur la Grande Guerre. Garnier; 2021:217-232.","apa":"Schreckenberg, S. (2021). Éthiques et esthétiques de la Grande Guerre chez des auteurs de la génération des petits-enfants. In J. Mecke, P. Schoentjes, & A.-S. Donnarieix (Eds.), Esthétique de la guerre - Éthique de la paix. Un siècle de littérature sur la Grande Guerre (pp. 217–232). Garnier.","bibtex":"@inbook{Schreckenberg_2021, place={Paris}, title={Éthiques et esthétiques de la Grande Guerre chez des auteurs de la génération des petits-enfants}, booktitle={Esthétique de la guerre - Éthique de la paix. Un siècle de littérature sur la Grande Guerre}, publisher={Garnier}, author={Schreckenberg, Stefan}, editor={Mecke, Jochen and Schoentjes, Pierre and Donnarieix, Anne-Sophie }, year={2021}, pages={217–232} }","mla":"Schreckenberg, Stefan. “Éthiques et esthétiques de la Grande Guerre chez des auteurs de la génération des petits-enfants.” Esthétique de la guerre - Éthique de la paix. Un siècle de littérature sur la Grande Guerre, edited by Jochen Mecke et al., Garnier, 2021, pp. 217–32.","short":"S. Schreckenberg, in: J. Mecke, P. Schoentjes, A.-S. Donnarieix (Eds.), Esthétique de la guerre - Éthique de la paix. Un siècle de littérature sur la Grande Guerre, Garnier, Paris, 2021, pp. 217–232.","ieee":"S. Schreckenberg, “Éthiques et esthétiques de la Grande Guerre chez des auteurs de la génération des petits-enfants,” in Esthétique de la guerre - Éthique de la paix. Un siècle de littérature sur la Grande Guerre, J. Mecke, P. Schoentjes, and A.-S. Donnarieix, Eds. Paris: Garnier, 2021, pp. 217–232."},"type":"book_chapter","page":"217-232","language":[{"iso":"fre"}]},{"title":"V-model based development of cyber-physical systems and cyber-physical production systems","publication_status":"published","publication_identifier":{"issn":["2212-8271"]},"department":[{"_id":"152"}],"oa":"1","doi":"10.1016/j.procir.2021.05.119","date_updated":"2023-05-09T18:22:49Z","language":[{"iso":"eng"}],"user_id":"67161","abstract":[{"lang":"eng","text":"Challenges of the development of mechatronic systems and corresponding production systems have increased steadily. Changes are primarily due to increased product complexity and the connection to the internet of things and services, enabling Cyber-Physical Systems (CPS) and Cyber-Physical Production Systems (CPPS). Major innovations of the revised VDI guideline 2206 for developing mechatronic systems are systems thinking as a core element and six checkpoints for structuring deliverables along the V-Model. These checkpoints serve for orientation in result progress and thus enable a structured and complete development process. However, tasks and checkpoints of the new guideline focus on the product development itself without integrating the development of related CPPS, enabling optimization simultaneously to system development. Implications are derived by a three-step analysis. The paper at hand contributes fundamental extensions of the checkpoint questions regarding integrated CPPS development. These questions provide methodical support for system developers of CPPS for CPS by enabling the project manager to check the status, schedule further development steps and evaluate the maturity of the whole, integrated development."}],"date_created":"2021-09-09T13:27:59Z","status":"public","publication":"Procedia CIRP","keyword":["Cyber-Physical Production System (CPPS)","V-Model","Product System Development","Integrated Development","VDI 2206"],"quality_controlled":"1","author":[{"last_name":"Gräßler","id":"47565","first_name":"Iris","full_name":"Gräßler, Iris","orcid":"0000-0001-5765-971X"},{"last_name":"Wiechel","id":"67161","first_name":"Dominik","full_name":"Wiechel, Dominik"},{"first_name":"Daniel","full_name":"Roesmann, Daniel","last_name":"Roesmann","id":"54680"},{"id":"33419","last_name":"Thiele","full_name":"Thiele, Henrik","first_name":"Henrik"}],"conference":{"name":"31st CIRP Design Conference 2021 (CIRP Design 2021)"},"_id":"24080","page":"253-258","year":"2021","type":"conference","citation":{"ieee":"I. Gräßler, D. Wiechel, D. Roesmann, and H. Thiele, “V-model based development of cyber-physical systems and cyber-physical production systems,” in Procedia CIRP, 2021, pp. 253–258, doi: 10.1016/j.procir.2021.05.119.","short":"I. Gräßler, D. Wiechel, D. Roesmann, H. Thiele, in: Procedia CIRP, 2021, pp. 253–258.","mla":"Gräßler, Iris, et al. “V-Model Based Development of Cyber-Physical Systems and Cyber-Physical Production Systems.” Procedia CIRP, 2021, pp. 253–58, doi:10.1016/j.procir.2021.05.119.","bibtex":"@inproceedings{Gräßler_Wiechel_Roesmann_Thiele_2021, title={V-model based development of cyber-physical systems and cyber-physical production systems}, DOI={10.1016/j.procir.2021.05.119}, booktitle={Procedia CIRP}, author={Gräßler, Iris and Wiechel, Dominik and Roesmann, Daniel and Thiele, Henrik}, year={2021}, pages={253–258} }","chicago":"Gräßler, Iris, Dominik Wiechel, Daniel Roesmann, and Henrik Thiele. “V-Model Based Development of Cyber-Physical Systems and Cyber-Physical Production Systems.” In Procedia CIRP, 253–58, 2021. https://doi.org/10.1016/j.procir.2021.05.119.","ama":"Gräßler I, Wiechel D, Roesmann D, Thiele H. V-model based development of cyber-physical systems and cyber-physical production systems. In: Procedia CIRP. ; 2021:253-258. doi:10.1016/j.procir.2021.05.119","apa":"Gräßler, I., Wiechel, D., Roesmann, D., & Thiele, H. (2021). V-model based development of cyber-physical systems and cyber-physical production systems. Procedia CIRP, 253–258. https://doi.org/10.1016/j.procir.2021.05.119"},"main_file_link":[{"url":"https://www.sciencedirect.com/science/article/pii/S2212827121005916","open_access":"1"}]},{"page":"518-523","type":"conference","citation":{"short":"I. Gräßler, D. Wiechel, D. Roesmann, in: Procedia CIRP, 2021, pp. 518–523.","ieee":"I. Gräßler, D. Wiechel, and D. Roesmann, “Integrating human factors in the model based development of cyber-physical production systems,” in Procedia CIRP, 2021, pp. 518–523, doi: 10.1016/j.procir.2021.05.113.","chicago":"Gräßler, Iris, Dominik Wiechel, and Daniel Roesmann. “Integrating Human Factors in the Model Based Development of Cyber-Physical Production Systems.” In Procedia CIRP, 518–23, 2021. https://doi.org/10.1016/j.procir.2021.05.113.","apa":"Gräßler, I., Wiechel, D., & Roesmann, D. (2021). Integrating human factors in the model based development of cyber-physical production systems. Procedia CIRP, 518–523. https://doi.org/10.1016/j.procir.2021.05.113","ama":"Gräßler I, Wiechel D, Roesmann D. Integrating human factors in the model based development of cyber-physical production systems. In: Procedia CIRP. ; 2021:518-523. doi:10.1016/j.procir.2021.05.113","mla":"Gräßler, Iris, et al. “Integrating Human Factors in the Model Based Development of Cyber-Physical Production Systems.” Procedia CIRP, 2021, pp. 518–23, doi:10.1016/j.procir.2021.05.113.","bibtex":"@inproceedings{Gräßler_Wiechel_Roesmann_2021, title={Integrating human factors in the model based development of cyber-physical production systems}, DOI={10.1016/j.procir.2021.05.113}, booktitle={Procedia CIRP}, author={Gräßler, Iris and Wiechel, Dominik and Roesmann, Daniel}, year={2021}, pages={518–523} }"},"year":"2021","language":[{"iso":"eng"}],"conference":{"name":"Procedia CIRP","start_date":"19-05-2021","end_date":"21-05-2021"},"_id":"24281","date_updated":"2023-05-09T18:23:36Z","doi":"10.1016/j.procir.2021.05.113","department":[{"_id":"152"}],"publication":"Procedia CIRP","author":[{"id":"47565","last_name":"Gräßler","full_name":"Gräßler, Iris","orcid":"0000-0001-5765-971X","first_name":"Iris"},{"last_name":"Wiechel","id":"67161","first_name":"Dominik","full_name":"Wiechel, Dominik"},{"full_name":"Roesmann, Daniel","first_name":"Daniel","id":"54680","last_name":"Roesmann"}],"quality_controlled":"1","publication_identifier":{"issn":["2212-8271"]},"publication_status":"published","date_created":"2021-09-13T14:51:45Z","status":"public","abstract":[{"lang":"eng","text":"In order to optimize production processes and to avoid errors, it is not only necessary to automate processes, but also to integrate workers with their individual personality and skill profiles. For this purpose, human factors should be considered in the entire design process. The integrated view of mental human models, the cognitive demand of the working environment and the automation design is essential. Human-System Integration (HSI) constitutes a promising approach. Current model-based approaches offer possibilities to analyze and optimize tasks within an overall system, but they still lack integration. This leads to the research question: How can human factors be integrated into a system model of a socio-technical, Cyber-Physical Production System? The paper at hand contributes an approach of human factor integration into the procedure of Model-Based Systems Engineering for Cyber-Physical Production Systems (CPPS). The approach combines a system model of a CPPS with HSI concepts. In accordance to the benefits of MBSE, SysML is selected to integrate human factors in the development process of a CPPS. The approach is divided into five steps, which includes the extension of the SysML meta model. This allows the optimization of skill-based human-machine interaction. Defined HSI-Profiles enable system developers to integrate employee requirements at early stages within the development process. The approach is demonstrated by the maintenance of a 3D-Printer as a case example. This research enables system developers to depict individual workers with the help of the developed concepts and systematically integrate them into the development process of a CPPS."}],"title":"Integrating human factors in the model based development of cyber-physical production systems","user_id":"67161"},{"title":"Digitaler Zwilling zur Gestaltung der Prozesse im End-of-Life","user_id":"60633","volume":9,"alternative_title":["Produktdaten für das Recycling einer Produktinstanz"],"editor":[{"last_name":"Biedermann","full_name":"Biedermann, Hubert","first_name":"Hubert"},{"full_name":"Posch, Wolfgang","first_name":"Wolfgang","last_name":"Posch"},{"last_name":"Vorbach","full_name":"Vorbach, Stefan","first_name":"Stefan"}],"date_created":"2021-09-14T15:51:41Z","status":"public","department":[{"_id":"152"},{"_id":"321"}],"publication":"Digitalisierung im Kontext von Nachhaltigkeit und Klimawandel","publisher":"Nomos Verlagsgesellschaft","author":[{"last_name":"Hesse","id":"60633","first_name":"Philipp","full_name":"Hesse, Philipp"},{"last_name":"Gräßler","id":"47565","first_name":"Iris","orcid":"0000-0001-5765-971X","full_name":"Gräßler, Iris"}],"doi":"10.5771/9783957102966-135","_id":"24444","intvolume":" 9","date_updated":"2023-05-10T07:31:29Z","page":"135-148","year":"2021","citation":{"ieee":"P. Hesse and I. Gräßler, “Digitaler Zwilling zur Gestaltung der Prozesse im End-of-Life,” in Digitalisierung im Kontext von Nachhaltigkeit und Klimawandel, 2021, vol. 9, pp. 135–148, doi: 10.5771/9783957102966-135.","short":"P. Hesse, I. Gräßler, in: H. Biedermann, W. Posch, S. Vorbach (Eds.), Digitalisierung im Kontext von Nachhaltigkeit und Klimawandel, Nomos Verlagsgesellschaft, 2021, pp. 135–148.","mla":"Hesse, Philipp, and Iris Gräßler. “Digitaler Zwilling zur Gestaltung der Prozesse im End-of-Life.” Digitalisierung im Kontext von Nachhaltigkeit und Klimawandel, edited by Hubert Biedermann et al., vol. 9, Nomos Verlagsgesellschaft, 2021, pp. 135–48, doi:10.5771/9783957102966-135.","bibtex":"@inproceedings{Hesse_Gräßler_2021, title={Digitaler Zwilling zur Gestaltung der Prozesse im End-of-Life}, volume={9}, DOI={10.5771/9783957102966-135}, booktitle={Digitalisierung im Kontext von Nachhaltigkeit und Klimawandel}, publisher={Nomos Verlagsgesellschaft}, author={Hesse, Philipp and Gräßler, Iris}, editor={Biedermann, Hubert and Posch, Wolfgang and Vorbach, Stefan}, year={2021}, pages={135–148} }","chicago":"Hesse, Philipp, and Iris Gräßler. “Digitaler Zwilling zur Gestaltung der Prozesse im End-of-Life.” In Digitalisierung im Kontext von Nachhaltigkeit und Klimawandel, edited by Hubert Biedermann, Wolfgang Posch, and Stefan Vorbach, 9:135–48. Nomos Verlagsgesellschaft, 2021. https://doi.org/10.5771/9783957102966-135.","apa":"Hesse, P., & Gräßler, I. (2021). Digitaler Zwilling zur Gestaltung der Prozesse im End-of-Life. In H. Biedermann, W. Posch, & S. Vorbach (Eds.), Digitalisierung im Kontext von Nachhaltigkeit und Klimawandel (Vol. 9, pp. 135–148). Nomos Verlagsgesellschaft. https://doi.org/10.5771/9783957102966-135","ama":"Hesse P, Gräßler I. Digitaler Zwilling zur Gestaltung der Prozesse im End-of-Life. In: Biedermann H, Posch W, Vorbach S, eds. Digitalisierung im Kontext von Nachhaltigkeit und Klimawandel. Vol 9. Nomos Verlagsgesellschaft; 2021:135-148. doi:10.5771/9783957102966-135"},"type":"conference","language":[{"iso":"ger"}]},{"series_title":"VDI/VDE 2206:2021-11","language":[{"iso":"ger"}],"page":"67","type":"misc","citation":{"short":"I. Gräßler, J. Hentze, P. Hesse, D. Preuß, H. Thiele, D. Wiechel, M. Bothen, T. Bruckmann, M. Dattner, T. Ehl, M. Hawlas, C. Krimpmann, R. Lachmayer, M. Knöchelmann, R. Mock, I. Mozgova, M. Schneider, G. Stollt, VDI/VDE 2206 - Entwicklung mechatronischer und cyber-physischer Systeme, Ed.: VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik, 2021.","ieee":"I. Gräßler et al., VDI/VDE 2206 - Entwicklung mechatronischer und cyber-physischer Systeme. Ed.: VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik, 2021.","chicago":"Gräßler, Iris, Julian Hentze, Philipp Hesse, Daniel Preuß, Henrik Thiele, Dominik Wiechel, Martin Bothen, et al. VDI/VDE 2206 - Entwicklung mechatronischer und cyber-physischer Systeme. VDI/VDE 2206:2021-11. Ed.: VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik, 2021.","ama":"Gräßler I, Hentze J, Hesse P, et al. VDI/VDE 2206 - Entwicklung mechatronischer und cyber-physischer Systeme. Ed.: VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik; 2021.","apa":"Gräßler, I., Hentze, J., Hesse, P., Preuß, D., Thiele, H., Wiechel, D., Bothen, M., Bruckmann, T., Dattner, M., Ehl, T., Hawlas, M., Krimpmann, C., Lachmayer, R., Knöchelmann, M., Mock, R., Mozgova, I., Schneider, M., & Stollt, G. (2021). VDI/VDE 2206 - Entwicklung mechatronischer und cyber-physischer Systeme. Ed.: VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik.","mla":"Gräßler, Iris, et al. VDI/VDE 2206 - Entwicklung mechatronischer und cyber-physischer Systeme. Ed.: VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik, 2021.","bibtex":"@book{Gräßler_Hentze_Hesse_Preuß_Thiele_Wiechel_Bothen_Bruckmann_Dattner_Ehl_et al._2021, series={VDI/VDE 2206:2021-11}, title={VDI/VDE 2206 - Entwicklung mechatronischer und cyber-physischer Systeme}, publisher={Ed.: VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik}, author={Gräßler, Iris and Hentze, Julian and Hesse, Philipp and Preuß, Daniel and Thiele, Henrik and Wiechel, Dominik and Bothen, Martin and Bruckmann, Tobias and Dattner, Michael and Ehl, Thomas and et al.}, year={2021}, collection={VDI/VDE 2206:2021-11} }"},"year":"2021","date_updated":"2023-05-10T07:31:14Z","_id":"27680","department":[{"_id":"152"}],"author":[{"id":"47565","last_name":"Gräßler","full_name":"Gräßler, Iris","orcid":"0000-0001-5765-971X","first_name":"Iris"},{"id":"13342","last_name":"Hentze","full_name":"Hentze, Julian","first_name":"Julian"},{"full_name":"Hesse, Philipp","first_name":"Philipp","id":"60633","last_name":"Hesse"},{"first_name":"Daniel","full_name":"Preuß, Daniel","last_name":"Preuß","id":"40253"},{"full_name":"Thiele, Henrik","first_name":"Henrik","id":"33419","last_name":"Thiele"},{"last_name":"Wiechel","id":"67161","first_name":"Dominik","full_name":"Wiechel, Dominik"},{"full_name":"Bothen, Martin","first_name":"Martin","last_name":"Bothen"},{"last_name":"Bruckmann","full_name":"Bruckmann, Tobias ","first_name":"Tobias "},{"first_name":"Michael","full_name":"Dattner, Michael","last_name":"Dattner"},{"last_name":"Ehl","full_name":"Ehl, Thomas","first_name":"Thomas"},{"last_name":"Hawlas","first_name":"Martin","full_name":"Hawlas, Martin"},{"first_name":"Christoph","full_name":"Krimpmann, Christoph","last_name":"Krimpmann"},{"full_name":"Lachmayer, Roland","first_name":"Roland","last_name":"Lachmayer"},{"first_name":"Marvin","full_name":"Knöchelmann, Marvin","last_name":"Knöchelmann"},{"first_name":"Randolf","full_name":"Mock, Randolf","last_name":"Mock"},{"last_name":"Mozgova","full_name":"Mozgova, Iryna","first_name":"Iryna"},{"first_name":"Maximilian","full_name":"Schneider, Maximilian","last_name":"Schneider"},{"full_name":"Stollt, Guido","first_name":"Guido","last_name":"Stollt"}],"publisher":"Ed.: VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik","date_created":"2021-11-22T09:16:12Z","status":"public","publication_status":"published","user_id":"60633","title":"VDI/VDE 2206 - Entwicklung mechatronischer und cyber-physischer Systeme"},{"place":"Alpexpo | Grenoble, France","title":"Malicious Routing: Circumventing Bitstream-level Verification for FPGAs","department":[{"_id":"78"}],"project":[{"_id":"12","name":"SFB 901 - Subproject B4"},{"_id":"3","name":"SFB 901 - Project Area B"},{"_id":"1","name":"SFB 901"}],"publication_status":"published","publication_identifier":{"eisbn":["978-3-9819263-5-4"]},"date_updated":"2023-05-11T09:16:34Z","oa":"1","doi":"10.23919/DATE51398.2021.9474026","language":[{"iso":"eng"}],"abstract":[{"lang":"eng","text":"The battle of developing hardware Trojans and corresponding countermeasures has taken adversaries towards ingenious ways of compromising hardware designs by circumventing even advanced testing and verification methods. Besides conventional methods of inserting Trojans into a design by a malicious entity, the design flow for field-programmable gate arrays (FPGAs) can also be surreptitiously compromised to assist the attacker to perform a successful malfunctioning or information leakage attack. The advanced stealthy malicious look-up-table (LUT) attack activates a Trojan only when generating the FPGA bitstream and can thus not be detected by register transfer and gate level testing and verification. However, also this attack was recently revealed by a bitstream-level proof-carrying hardware (PCH) approach. In this paper, we present a novel attack that leverages malicious routing of the inserted Trojan circuit to acquire a dormant state even in the generated and transmitted bitstream. The Trojan's payload is connected to primary inputs/outputs of the FPGA via a programmable interconnect point (PIP). The Trojan is detached from inputs/outputs during place-and-route and re-connected only when the FPGA is being programmed, thus activating the Trojan circuit without any need for a trigger logic. Since the Trojan is injected in a post-synthesis step and remains unconnected in the bitstream, the presented attack can currently neither be prevented by conventional testing and verification methods nor by recent bitstream-level verification techniques."}],"user_id":"72764","ddc":["006"],"file":[{"access_level":"closed","date_created":"2023-05-11T09:16:15Z","file_name":"1812.pdf","date_updated":"2023-05-11T09:16:15Z","content_type":"application/pdf","relation":"main_file","success":1,"file_size":394011,"creator":"qazi","file_id":"44752"}],"publisher":"2021 Design, Automation and Test in Europe Conference (DATE)","author":[{"full_name":"Ahmed, Qazi Arbab","orcid":"0000-0002-1837-2254","first_name":"Qazi Arbab","id":"72764","last_name":"Ahmed"},{"first_name":"Tobias","full_name":"Wiersema, Tobias","last_name":"Wiersema","id":"3118"},{"last_name":"Platzner","id":"398","first_name":"Marco","full_name":"Platzner, Marco"}],"file_date_updated":"2023-05-11T09:16:15Z","publication":"2021 Design, Automation & Test in Europe Conference & Exhibition (DATE)","has_accepted_license":"1","status":"public","date_created":"2020-12-07T14:03:00Z","_id":"20681","conference":{"end_date":"2021-02-05","location":"Alpexpo | Grenoble, France","name":"Design, Automation and Test in Europe Conference (DATE'21)","start_date":"2021-02-01"},"main_file_link":[{"open_access":"1"}],"type":"conference","citation":{"ieee":"Q. A. Ahmed, T. Wiersema, and M. Platzner, “Malicious Routing: Circumventing Bitstream-level Verification for FPGAs,” presented at the Design, Automation and Test in Europe Conference (DATE’21), Alpexpo | Grenoble, France, 2021, doi: 10.23919/DATE51398.2021.9474026.","short":"Q.A. Ahmed, T. Wiersema, M. Platzner, in: 2021 Design, Automation & Test in Europe Conference & Exhibition (DATE), 2021 Design, Automation and Test in Europe Conference (DATE), Alpexpo | Grenoble, France, 2021.","bibtex":"@inproceedings{Ahmed_Wiersema_Platzner_2021, place={Alpexpo | Grenoble, France}, title={Malicious Routing: Circumventing Bitstream-level Verification for FPGAs}, DOI={10.23919/DATE51398.2021.9474026}, booktitle={2021 Design, Automation & Test in Europe Conference & Exhibition (DATE)}, publisher={2021 Design, Automation and Test in Europe Conference (DATE)}, author={Ahmed, Qazi Arbab and Wiersema, Tobias and Platzner, Marco}, year={2021} }","mla":"Ahmed, Qazi Arbab, et al. “Malicious Routing: Circumventing Bitstream-Level Verification for FPGAs.” 2021 Design, Automation & Test in Europe Conference & Exhibition (DATE), 2021 Design, Automation and Test in Europe Conference (DATE), 2021, doi:10.23919/DATE51398.2021.9474026.","ama":"Ahmed QA, Wiersema T, Platzner M. Malicious Routing: Circumventing Bitstream-level Verification for FPGAs. In: 2021 Design, Automation & Test in Europe Conference & Exhibition (DATE). 2021 Design, Automation and Test in Europe Conference (DATE); 2021. doi:10.23919/DATE51398.2021.9474026","apa":"Ahmed, Q. A., Wiersema, T., & Platzner, M. (2021). Malicious Routing: Circumventing Bitstream-level Verification for FPGAs. 2021 Design, Automation & Test in Europe Conference & Exhibition (DATE). Design, Automation and Test in Europe Conference (DATE’21), Alpexpo | Grenoble, France. https://doi.org/10.23919/DATE51398.2021.9474026","chicago":"Ahmed, Qazi Arbab, Tobias Wiersema, and Marco Platzner. “Malicious Routing: Circumventing Bitstream-Level Verification for FPGAs.” In 2021 Design, Automation & Test in Europe Conference & Exhibition (DATE). Alpexpo | Grenoble, France: 2021 Design, Automation and Test in Europe Conference (DATE), 2021. https://doi.org/10.23919/DATE51398.2021.9474026."},"year":"2021"},{"status":"public","date_created":"2023-03-14T08:43:19Z","author":[{"full_name":"Dewerth, Mats-Ole","first_name":"Mats-Ole","last_name":"Dewerth"},{"id":"45530","last_name":"Neukötter","orcid":"0000-0001-9101-8828","full_name":"Neukötter, Moritz","first_name":"Moritz"}],"department":[{"_id":"9"},{"_id":"150"}],"title":"Entwicklung eines Versuchsaufbaus zur rheo-optischen Untersuchung des Dehnverhaltens von Polymerschmelzen und -lösungen am Hochdruck-Kapillarrheometer (Studienarbeit)","user_id":"45530","year":"2021","citation":{"ieee":"M.-O. Dewerth and M. Neukötter, Entwicklung eines Versuchsaufbaus zur rheo-optischen Untersuchung des Dehnverhaltens von Polymerschmelzen und -lösungen am Hochdruck-Kapillarrheometer (Studienarbeit). 2021.","short":"M.-O. Dewerth, M. Neukötter, Entwicklung eines Versuchsaufbaus zur rheo-optischen Untersuchung des Dehnverhaltens von Polymerschmelzen und -lösungen am Hochdruck-Kapillarrheometer (Studienarbeit), 2021.","bibtex":"@book{Dewerth_Neukötter_2021, title={Entwicklung eines Versuchsaufbaus zur rheo-optischen Untersuchung des Dehnverhaltens von Polymerschmelzen und -lösungen am Hochdruck-Kapillarrheometer (Studienarbeit)}, author={Dewerth, Mats-Ole and Neukötter, Moritz}, year={2021} }","mla":"Dewerth, Mats-Ole, and Moritz Neukötter. Entwicklung eines Versuchsaufbaus zur rheo-optischen Untersuchung des Dehnverhaltens von Polymerschmelzen und -lösungen am Hochdruck-Kapillarrheometer (Studienarbeit). 2021.","chicago":"Dewerth, Mats-Ole, and Moritz Neukötter. Entwicklung eines Versuchsaufbaus zur rheo-optischen Untersuchung des Dehnverhaltens von Polymerschmelzen und -lösungen am Hochdruck-Kapillarrheometer (Studienarbeit), 2021.","apa":"Dewerth, M.-O., & Neukötter, M. (2021). Entwicklung eines Versuchsaufbaus zur rheo-optischen Untersuchung des Dehnverhaltens von Polymerschmelzen und -lösungen am Hochdruck-Kapillarrheometer (Studienarbeit).","ama":"Dewerth M-O, Neukötter M. Entwicklung eines Versuchsaufbaus zur rheo-optischen Untersuchung des Dehnverhaltens von Polymerschmelzen und -lösungen am Hochdruck-Kapillarrheometer (Studienarbeit).; 2021."},"type":"mastersthesis","supervisor":[{"full_name":"Neukötter, Moritz","orcid":"0000-0001-9101-8828","first_name":"Moritz","id":"45530","last_name":"Neukötter"},{"id":"464","last_name":"Schmid","orcid":"000-0001-8590-1921","full_name":"Schmid, Hans-Joachim","first_name":"Hans-Joachim"}],"language":[{"iso":"ger"}],"date_updated":"2023-05-12T06:47:56Z","_id":"42989"},{"supervisor":[{"first_name":"Moritz","full_name":"Neukötter, Moritz","orcid":"0000-0001-9101-8828","last_name":"Neukötter","id":"45530"},{"last_name":"Schmid","id":"464","first_name":"Hans-Joachim","orcid":"000-0001-8590-1921","full_name":"Schmid, Hans-Joachim"},{"last_name":"Jesinghausen","id":"3959","first_name":"Steffen","orcid":"https://orcid.org/0000-0003-2611-5298","full_name":"Jesinghausen, Steffen"}],"language":[{"iso":"ger"}],"year":"2021","type":"bachelorsthesis","citation":{"short":"M. Hütte, M. Neukötter, Weiterentwicklung des Versuchsaufbaus zur Untersuchung von Polymerschmelzen und -lösungen am Hochdruck-Kapillarrheometer, 2021.","ieee":"M. Hütte and M. Neukötter, Weiterentwicklung des Versuchsaufbaus zur Untersuchung von Polymerschmelzen und -lösungen am Hochdruck-Kapillarrheometer. 2021.","chicago":"Hütte, Marvin, and Moritz Neukötter. Weiterentwicklung des Versuchsaufbaus zur Untersuchung von Polymerschmelzen und -lösungen am Hochdruck-Kapillarrheometer, 2021.","apa":"Hütte, M., & Neukötter, M. (2021). Weiterentwicklung des Versuchsaufbaus zur Untersuchung von Polymerschmelzen und -lösungen am Hochdruck-Kapillarrheometer.","ama":"Hütte M, Neukötter M. Weiterentwicklung des Versuchsaufbaus zur Untersuchung von Polymerschmelzen und -lösungen am Hochdruck-Kapillarrheometer.; 2021.","bibtex":"@book{Hütte_Neukötter_2021, title={Weiterentwicklung des Versuchsaufbaus zur Untersuchung von Polymerschmelzen und -lösungen am Hochdruck-Kapillarrheometer}, author={Hütte, Marvin and Neukötter, Moritz}, year={2021} }","mla":"Hütte, Marvin, and Moritz Neukötter. Weiterentwicklung des Versuchsaufbaus zur Untersuchung von Polymerschmelzen und -lösungen am Hochdruck-Kapillarrheometer. 2021."},"date_updated":"2023-05-12T06:48:49Z","_id":"43004","date_created":"2023-03-14T09:00:27Z","status":"public","department":[{"_id":"9"},{"_id":"150"}],"author":[{"last_name":"Hütte","full_name":"Hütte, Marvin","first_name":"Marvin"},{"first_name":"Moritz","orcid":"0000-0001-9101-8828","full_name":"Neukötter, Moritz","last_name":"Neukötter","id":"45530"}],"user_id":"45530","title":"Weiterentwicklung des Versuchsaufbaus zur Untersuchung von Polymerschmelzen und -lösungen am Hochdruck-Kapillarrheometer"},{"issue":"1","_id":"23456","intvolume":" 99","page":"107-116","citation":{"apa":"Mattiolo, D., & Steffen, E. (2021). Highly edge‐connected regular graphs without large factorizable subgraphs. Journal of Graph Theory, 99(1), 107–116. https://doi.org/10.1002/jgt.22729","ama":"Mattiolo D, Steffen E. Highly edge‐connected regular graphs without large factorizable subgraphs. Journal of Graph Theory. 2021;99(1):107-116. doi:10.1002/jgt.22729","chicago":"Mattiolo, Davide, and Eckhard Steffen. “Highly Edge‐connected Regular Graphs without Large Factorizable Subgraphs.” Journal of Graph Theory 99, no. 1 (2021): 107–16. https://doi.org/10.1002/jgt.22729.","bibtex":"@article{Mattiolo_Steffen_2021, title={Highly edge‐connected regular graphs without large factorizable subgraphs}, volume={99}, DOI={10.1002/jgt.22729}, number={1}, journal={Journal of Graph Theory}, author={Mattiolo, Davide and Steffen, Eckhard}, year={2021}, pages={107–116} }","mla":"Mattiolo, Davide, and Eckhard Steffen. “Highly Edge‐connected Regular Graphs without Large Factorizable Subgraphs.” Journal of Graph Theory, vol. 99, no. 1, 2021, pp. 107–16, doi:10.1002/jgt.22729.","short":"D. Mattiolo, E. Steffen, Journal of Graph Theory 99 (2021) 107–116.","ieee":"D. Mattiolo and E. Steffen, “Highly edge‐connected regular graphs without large factorizable subgraphs,” Journal of Graph Theory, vol. 99, no. 1, pp. 107–116, 2021, doi: 10.1002/jgt.22729."},"year":"2021","type":"journal_article","user_id":"15540","article_type":"original","volume":99,"date_created":"2021-08-19T12:45:45Z","status":"public","publication":"Journal of Graph Theory","keyword":["factorization","perfect matchings","regular graphs","r-graphs"],"author":[{"full_name":"Mattiolo, Davide","first_name":"Davide","last_name":"Mattiolo"},{"id":"15548","last_name":"Steffen","orcid":"0000-0002-9808-7401","full_name":"Steffen, Eckhard","first_name":"Eckhard"}],"doi":"10.1002/jgt.22729","date_updated":"2023-05-16T10:39:20Z","language":[{"iso":"eng"}],"title":"Highly edge‐connected regular graphs without large factorizable subgraphs","external_id":{"arxiv":["1912.09704"]},"publication_identifier":{"issn":["0364-9024","1097-0118"]},"publication_status":"published"},{"external_id":{"arxiv":["1903.12385"]},"user_id":"15540","title":"Fractional Matchings, Component-Factors and Edge-Chromatic Critical Graphs","author":[{"last_name":"Klopp","full_name":"Klopp, Antje","first_name":"Antje"},{"id":"15548","last_name":"Steffen","orcid":"0000-0002-9808-7401","full_name":"Steffen, Eckhard","first_name":"Eckhard"}],"publication":"Graphs and Combinatorics","status":"public","date_created":"2021-04-30T07:22:24Z","publication_status":"published","publication_identifier":{"issn":["0911-0119","1435-5914"]},"_id":"21827","date_updated":"2023-05-16T10:45:10Z","doi":"10.1007/s00373-020-02266-6","language":[{"iso":"eng"}],"year":"2021","citation":{"short":"A. Klopp, E. Steffen, Graphs and Combinatorics (2021) 559–580.","ieee":"A. Klopp and E. Steffen, “Fractional Matchings, Component-Factors and Edge-Chromatic Critical Graphs,” Graphs and Combinatorics, pp. 559–580, 2021, doi: 10.1007/s00373-020-02266-6.","apa":"Klopp, A., & Steffen, E. (2021). Fractional Matchings, Component-Factors and Edge-Chromatic Critical Graphs. Graphs and Combinatorics, 559–580. https://doi.org/10.1007/s00373-020-02266-6","ama":"Klopp A, Steffen E. Fractional Matchings, Component-Factors and Edge-Chromatic Critical Graphs. Graphs and Combinatorics. Published online 2021:559-580. doi:10.1007/s00373-020-02266-6","chicago":"Klopp, Antje, and Eckhard Steffen. “Fractional Matchings, Component-Factors and Edge-Chromatic Critical Graphs.” Graphs and Combinatorics, 2021, 559–80. https://doi.org/10.1007/s00373-020-02266-6.","bibtex":"@article{Klopp_Steffen_2021, title={Fractional Matchings, Component-Factors and Edge-Chromatic Critical Graphs}, DOI={10.1007/s00373-020-02266-6}, journal={Graphs and Combinatorics}, author={Klopp, Antje and Steffen, Eckhard}, year={2021}, pages={559–580} }","mla":"Klopp, Antje, and Eckhard Steffen. “Fractional Matchings, Component-Factors and Edge-Chromatic Critical Graphs.” Graphs and Combinatorics, 2021, pp. 559–80, doi:10.1007/s00373-020-02266-6."},"type":"journal_article","page":"559-580"},{"intvolume":" 91","_id":"13445","date_updated":"2023-05-16T10:46:55Z","year":"2021","type":"journal_article","citation":{"short":"E. Steffen, A. Vogel, European J. Combinatorics 91 (2021).","ieee":"E. Steffen and A. Vogel, “Concepts of signed graph coloring,” European J. Combinatorics, vol. 91, 2021.","ama":"Steffen E, Vogel A. Concepts of signed graph coloring. European J Combinatorics. 2021;91.","apa":"Steffen, E., & Vogel, A. (2021). Concepts of signed graph coloring. European J. Combinatorics, 91.","chicago":"Steffen, Eckhard, and Alexander Vogel. “Concepts of Signed Graph Coloring.” European J. Combinatorics 91 (2021).","mla":"Steffen, Eckhard, and Alexander Vogel. “Concepts of Signed Graph Coloring.” European J. Combinatorics, vol. 91, 2021.","bibtex":"@article{Steffen_Vogel_2021, title={Concepts of signed graph coloring}, volume={91}, journal={European J. Combinatorics}, author={Steffen, Eckhard and Vogel, Alexander}, year={2021} }"},"language":[{"iso":"eng"}],"title":"Concepts of signed graph coloring","user_id":"15540","external_id":{"arxiv":["1909.09381"]},"volume":91,"status":"public","date_created":"2019-09-24T14:19:42Z","author":[{"last_name":"Steffen","id":"15548","first_name":"Eckhard","orcid":"0000-0002-9808-7401","full_name":"Steffen, Eckhard"},{"full_name":"Vogel, Alexander","first_name":"Alexander","last_name":"Vogel"}],"publication":"European J. Combinatorics"},{"citation":{"ieee":"F. Dopheide, C. Freitag, L. Koch, and C. Struchholz, “Gesellschaftliche Wirkprozesse des Civic Engagement qualitativ erforschen,” in Impulse zu Methoden in der deutschsprachigen Civic Engagement-Forschung, K.-H. Gerholz and https://www.bildung-durch-verantwortung.de/wp-content/uploads/2021/03/Proceedings_AGForschung_ImpulseMethoden.pdf, Eds. 2021, pp. 15–32.","short":"F. Dopheide, C. Freitag, L. Koch, C. Struchholz, in: K.-H. Gerholz, https://www.bildung-durch-verantwortung.de/wp-content/uploads/2021/03/Proceedings_AGForschung_ImpulseMethoden.pdf (Eds.), Impulse zu Methoden in der deutschsprachigen Civic Engagement-Forschung, 2021, pp. 15–32.","mla":"Dopheide, F., et al. “Gesellschaftliche Wirkprozesse des Civic Engagement qualitativ erforschen.” Impulse zu Methoden in der deutschsprachigen Civic Engagement-Forschung, edited by Karl-Heinz Gerholz and https://www.bildung-durch-verantwortung.de/wp-content/uploads/2021/03/Proceedings_AGForschung_ImpulseMethoden.pdf, 2021, pp. 15–32.","bibtex":"@inbook{Dopheide_Freitag_Koch_Struchholz_2021, title={Gesellschaftliche Wirkprozesse des Civic Engagement qualitativ erforschen}, booktitle={Impulse zu Methoden in der deutschsprachigen Civic Engagement-Forschung}, author={Dopheide, F. and Freitag, Christine and Koch, L. and Struchholz, C.}, editor={Gerholz, Karl-Heinz and https://www.bildung-durch-verantwortung.de/wp-content/uploads/2021/03/Proceedings_AGForschung_ImpulseMethoden.pdf}, year={2021}, pages={15–32} }","chicago":"Dopheide, F., Christine Freitag, L. Koch, and C. Struchholz. “Gesellschaftliche Wirkprozesse des Civic Engagement qualitativ erforschen.” In Impulse zu Methoden in der deutschsprachigen Civic Engagement-Forschung, edited by Karl-Heinz Gerholz and https://www.bildung-durch-verantwortung.de/wp-content/uploads/2021/03/Proceedings_AGForschung_ImpulseMethoden.pdf, 15–32, 2021.","ama":"Dopheide F, Freitag C, Koch L, Struchholz C. Gesellschaftliche Wirkprozesse des Civic Engagement qualitativ erforschen. In: Gerholz K-H, https://www.bildung-durch-verantwortung.de/wp-content/uploads/2021/03/Proceedings_AGForschung_ImpulseMethoden.pdf, eds. Impulse zu Methoden in der deutschsprachigen Civic Engagement-Forschung. ; 2021:15-32.","apa":"Dopheide, F., Freitag, C., Koch, L., & Struchholz, C. (2021). Gesellschaftliche Wirkprozesse des Civic Engagement qualitativ erforschen. In K.-H. Gerholz & https://www.bildung-durch-verantwortung.de/wp-content/uploads/2021/03/Proceedings_AGForschung_ImpulseMethoden.pdf (Eds.), Impulse zu Methoden in der deutschsprachigen Civic Engagement-Forschung (pp. 15–32)."},"year":"2021","type":"book_chapter","page":"15-32","language":[{"iso":"ger"}],"corporate_editor":["https://www.bildung-durch-verantwortung.de/wp-content/uploads/2021/03/Proceedings_AGForschung_ImpulseMethoden.pdf"],"_id":"37537","date_updated":"2023-05-16T11:10:44Z","editor":[{"last_name":"Gerholz","first_name":"Karl-Heinz","full_name":"Gerholz, Karl-Heinz"}],"publication_status":"published","status":"public","date_created":"2023-01-19T09:54:16Z","author":[{"last_name":"Dopheide","full_name":"Dopheide, F.","first_name":"F."},{"first_name":"Christine","full_name":"Freitag, Christine","last_name":"Freitag","id":"20560"},{"last_name":"Koch","full_name":"Koch, L.","first_name":"L."},{"last_name":"Struchholz","full_name":"Struchholz, C.","first_name":"C."}],"publication":"Impulse zu Methoden in der deutschsprachigen Civic Engagement-Forschung","department":[{"_id":"453"}],"title":"Gesellschaftliche Wirkprozesse des Civic Engagement qualitativ erforschen","user_id":"49063"},{"title":"Denk-Wege zu einer religionssensiblen Schulkultur: erziehungswissenschaftliche Perspektiven","user_id":"49063","publication_status":"published","date_created":"2023-01-19T10:02:33Z","status":"public","publication":"Katechetische Blätter","department":[{"_id":"453"}],"publisher":"https://www.katbl.de","author":[{"first_name":"Christine","full_name":"Freitag, Christine","last_name":"Freitag","id":"20560"}],"issue":"4","_id":"37539","date_updated":"2023-05-16T11:10:47Z","page":"255-258","year":"2021","type":"journal_article","citation":{"bibtex":"@article{Freitag_2021, title={Denk-Wege zu einer religionssensiblen Schulkultur: erziehungswissenschaftliche Perspektiven}, number={4}, journal={Katechetische Blätter}, publisher={https://www.katbl.de}, author={Freitag, Christine}, year={2021}, pages={255–258} }","mla":"Freitag, Christine. “Denk-Wege zu einer religionssensiblen Schulkultur: erziehungswissenschaftliche Perspektiven.” Katechetische Blätter, no. 4, https://www.katbl.de, 2021, pp. 255–58.","chicago":"Freitag, Christine. “Denk-Wege zu einer religionssensiblen Schulkultur: erziehungswissenschaftliche Perspektiven.” Katechetische Blätter, no. 4 (2021): 255–58.","ama":"Freitag C. Denk-Wege zu einer religionssensiblen Schulkultur: erziehungswissenschaftliche Perspektiven. Katechetische Blätter. 2021;(4):255-258.","apa":"Freitag, C. (2021). Denk-Wege zu einer religionssensiblen Schulkultur: erziehungswissenschaftliche Perspektiven. Katechetische Blätter, 4, 255–258.","ieee":"C. Freitag, “Denk-Wege zu einer religionssensiblen Schulkultur: erziehungswissenschaftliche Perspektiven,” Katechetische Blätter, no. 4, pp. 255–258, 2021.","short":"C. Freitag, Katechetische Blätter (2021) 255–258."},"language":[{"iso":"ger"}]},{"author":[{"last_name":"Freitag","id":"20560","first_name":"Christine","full_name":"Freitag, Christine"}],"department":[{"_id":"453"}],"publication":"Impulse zu Methoden in der deutschsprachigen Civic Engagement-Forschung","editor":[{"first_name":"Karl-Heinz","full_name":"Gerholz, Karl-Heinz","last_name":"Gerholz"}],"publication_status":"published","status":"public","date_created":"2023-01-19T09:52:50Z","title":"Gesellschaftlich Wirkprozesse des Civic Engagement qualitativ erforschen","user_id":"49063","citation":{"short":"C. Freitag, in: K.-H. Gerholz, https://www.bildung-durch-verantwortung.de/wp-content/uploads/2021/03/Proceedings_AGForschung_ImpulseMethoden.pdf (Eds.), Impulse zu Methoden in der deutschsprachigen Civic Engagement-Forschung, 2021, pp. 15–32.","ieee":"C. Freitag, “Gesellschaftlich Wirkprozesse des Civic Engagement qualitativ erforschen,” in Impulse zu Methoden in der deutschsprachigen Civic Engagement-Forschung, K.-H. Gerholz and https://www.bildung-durch-verantwortung.de/wp-content/uploads/2021/03/Proceedings_AGForschung_ImpulseMethoden.pdf, Eds. 2021, pp. 15–32.","chicago":"Freitag, Christine. “Gesellschaftlich Wirkprozesse des Civic Engagement qualitativ erforschen.” In Impulse zu Methoden in der deutschsprachigen Civic Engagement-Forschung, edited by Karl-Heinz Gerholz and https://www.bildung-durch-verantwortung.de/wp-content/uploads/2021/03/Proceedings_AGForschung_ImpulseMethoden.pdf, 15–32, 2021.","apa":"Freitag, C. (2021). Gesellschaftlich Wirkprozesse des Civic Engagement qualitativ erforschen. In K.-H. Gerholz & https://www.bildung-durch-verantwortung.de/wp-content/uploads/2021/03/Proceedings_AGForschung_ImpulseMethoden.pdf (Eds.), Impulse zu Methoden in der deutschsprachigen Civic Engagement-Forschung (pp. 15–32).","ama":"Freitag C. Gesellschaftlich Wirkprozesse des Civic Engagement qualitativ erforschen. In: Gerholz K-H, https://www.bildung-durch-verantwortung.de/wp-content/uploads/2021/03/Proceedings_AGForschung_ImpulseMethoden.pdf, eds. Impulse zu Methoden in der deutschsprachigen Civic Engagement-Forschung. ; 2021:15-32.","mla":"Freitag, Christine. “Gesellschaftlich Wirkprozesse des Civic Engagement qualitativ erforschen.” Impulse zu Methoden in der deutschsprachigen Civic Engagement-Forschung, edited by Karl-Heinz Gerholz and https://www.bildung-durch-verantwortung.de/wp-content/uploads/2021/03/Proceedings_AGForschung_ImpulseMethoden.pdf, 2021, pp. 15–32.","bibtex":"@inbook{Freitag_2021, title={Gesellschaftlich Wirkprozesse des Civic Engagement qualitativ erforschen}, booktitle={Impulse zu Methoden in der deutschsprachigen Civic Engagement-Forschung}, author={Freitag, Christine}, editor={Gerholz, Karl-Heinz and https://www.bildung-durch-verantwortung.de/wp-content/uploads/2021/03/Proceedings_AGForschung_ImpulseMethoden.pdf}, year={2021}, pages={15–32} }"},"type":"book_chapter","year":"2021","page":"15-32","language":[{"iso":"ger"}],"date_updated":"2023-05-16T11:16:16Z","_id":"37533","corporate_editor":["https://www.bildung-durch-verantwortung.de/wp-content/uploads/2021/03/Proceedings_AGForschung_ImpulseMethoden.pdf"]},{"author":[{"last_name":"Hörnlein","id":"51082","first_name":"Madeleine","full_name":"Hörnlein, Madeleine"}],"department":[{"_id":"299"}],"status":"public","date_created":"2023-01-10T12:46:15Z","extern":"1","abstract":[{"lang":"ger","text":"Erklärvideos gewinnen auch im Kontext des Physikunterrichts verstärkt an Relevanz. Um zu evaluieren, welche Gestaltungsaspekte ein wirkungsvolles Erklärvideo ausmachen, ist es das Ziel der vorliegenden Masterarbeit herauszufinden, welchen Einfluss die kohärente Gestaltung eines Erklärvideos hat. Dazu wird die Forschungsfrage gestellt: „Welchen Einfluss hat die kohärente Gestaltung eines Erklärvideos auf den dadurch hervorgerufenen Lernzuwachs im Vergleich zu einem in der Hinsicht nicht optimierten Video?“ Um die Forschungsfrage zu beantworten, ist eine quantitative Studie im Prä- und Posttestdesign mit Schüler:innen der Jahrgangsstufe Q1 durchgeführt worden. Außerdem wurde in verschiedenen Kategorien nach einer Bewertung der Videos gefragt.\r\nDie Auswertung zeigt, dass durch das optimierte Video mit einem kleinen Effekt bessere Ergebnisse erzielt wurden, diese aber nicht signifikant und auch nicht für alle Aufgaben besser sind. Die Schüler:innen bewerteten das nicht optimierte Video in allen Kategorien besser als das optimierte Video. Auch dieses Ergebnis ist nicht signifikant."},{"lang":"eng","text":"Explanatory videos are also becoming increasingly relevant in the context of physics ed-ucation in school. In order to evaluate which design aspects cause an effective explanatory video, the aim of this master's thesis is to find out what influence the coherent design of an explanatory video has. In order to this, the following research question is asked: \"What influence does the coherent design of an explanatory video have on the learning gains it evokes compared to a video that is not optimized in this regard?\" In order to answer the research question, a quantitative study in a pretest and posttest design has been conducted with students in grade Q1. In addition, students were asked to rate the videos in various categories. The evaluation shows that the optimized video achieved better results with a small effect, but that these results were not significant and not better for all of the tasks. The students rated the non-optimized video better than the optimized video in all catego-ries. This result is also not significant."}],"title":"Untersuchung von Erklärvideos im Physikunterricht - Wirksamkeit von Kohärenz","user_id":"51082","main_file_link":[{"url":"https://physikdidaktik.com/masterarbeit-madeleine-hoernlein/"}],"citation":{"bibtex":"@book{Hörnlein_2021, title={Untersuchung von Erklärvideos im Physikunterricht - Wirksamkeit von Kohärenz}, author={Hörnlein, Madeleine}, year={2021} }","mla":"Hörnlein, Madeleine. Untersuchung von Erklärvideos Im Physikunterricht - Wirksamkeit von Kohärenz. 2021.","ama":"Hörnlein M. Untersuchung von Erklärvideos Im Physikunterricht - Wirksamkeit von Kohärenz.; 2021.","apa":"Hörnlein, M. (2021). Untersuchung von Erklärvideos im Physikunterricht - Wirksamkeit von Kohärenz.","chicago":"Hörnlein, Madeleine. Untersuchung von Erklärvideos Im Physikunterricht - Wirksamkeit von Kohärenz, 2021.","ieee":"M. Hörnlein, Untersuchung von Erklärvideos im Physikunterricht - Wirksamkeit von Kohärenz. 2021.","short":"M. Hörnlein, Untersuchung von Erklärvideos Im Physikunterricht - Wirksamkeit von Kohärenz, 2021."},"year":"2021","type":"mastersthesis","page":"105","language":[{"iso":"eng"}],"supervisor":[{"first_name":"Christoph","full_name":"Kulgemeyer, Christoph","last_name":"Kulgemeyer"},{"full_name":"Webersen, Yvonne","first_name":"Yvonne","last_name":"Webersen"}],"_id":"35839","date_updated":"2023-05-16T12:17:49Z"}]