[{"project":[{"_id":"191","name":"PhoQuant: Photonische Quantencomputer -  Quantencomputing Testplattform"}],"_id":"63403","user_id":"41047","department":[{"_id":"34"},{"_id":"64"}],"keyword":["distributed state","hash-based signature","stateful hash-based signature","universal composability","secure enclave"],"language":[{"iso":"eng"}],"type":"preprint","abstract":[{"lang":"eng","text":"Stateful signatures like the NIST standardized signature schemes LMS and XMSS provide an efficient and mature realization of post-quantum secure signature schemes. They are recommended for long-term use cases like e.g. firmware signing. However, stateful signature schemes require to properly manage a so-called state. In stateful signature schemes like LMS and XMSS, signing keys consist of a set of keys of a one-time signature scheme and it has to be guaranteed that each one-time key is used only once. This is done by updating a state in each signature computation, basically recording which one-time keys have already been used. While this is straightforward in centralized systems, in distributed systems like secure enclaves consisting of e.g. multiple hardware security modules (HSMs) with limited communication keeping a distributed state that at any point in time is consistent among all parties involved presents a challenge. This challenge is not addressed by the current standardization processes. \r\nIn this paper we present a security model for the distributed key management of post-quantum secure stateful signatures like XMSS and LMS. We also present a simple, efficient, and easy to implement protocol proven secure in this security model, i.e. the protocol guarantees at any point in time a consistent state among the parties in a distributed system, like a distributed security enclave. The security model is defined in the universal composabilty (UC) framework by Ran Canetti by providing an ideal functionality for the distributed key management for stateful signatures. Hence our protocol remains secure even if arbitrarily composed with other instances of the same or other protocols, a necessity for the security of distributed key management protocols. Our main application are security enclaves consisting of HSMs, but the model and the protocol can easily be adapted to other scenarios of distributed key management of stateful signature schemes."}],"status":"public","oa":"1","date_updated":"2025-12-23T11:30:38Z","author":[{"first_name":"Johannes","last_name":"Blömer","full_name":"Blömer, Johannes","id":"23"},{"orcid":"0009-0008-3938-5485","last_name":"Bröcher","full_name":"Bröcher, Henrik","id":"41047","first_name":"Henrik"},{"first_name":"Volker","last_name":"Krummel","full_name":"Krummel, Volker"},{"first_name":"Laurens Alexander","full_name":"Porzenheim, Laurens Alexander","id":"47434","last_name":"Porzenheim"}],"date_created":"2025-12-22T21:23:22Z","title":"Secure Distributed State Management for Stateful Signatures with a Practical and Universally Composable Protocol","main_file_link":[{"url":"https://eprint.iacr.org/2025/2278.pdf","open_access":"1"}],"publication_status":"submitted","year":"2025","citation":{"chicago":"Blömer, Johannes, Henrik Bröcher, Volker Krummel, and Laurens Alexander Porzenheim. “Secure Distributed State Management for Stateful Signatures with a Practical and Universally Composable Protocol,” n.d.","ieee":"J. Blömer, H. Bröcher, V. Krummel, and L. A. Porzenheim, “Secure Distributed State Management for Stateful Signatures with a Practical and Universally Composable Protocol.” .","ama":"Blömer J, Bröcher H, Krummel V, Porzenheim LA. Secure Distributed State Management for Stateful Signatures with a Practical and Universally Composable Protocol.","bibtex":"@article{Blömer_Bröcher_Krummel_Porzenheim, title={Secure Distributed State Management for Stateful Signatures with a Practical and Universally Composable Protocol}, author={Blömer, Johannes and Bröcher, Henrik and Krummel, Volker and Porzenheim, Laurens Alexander} }","short":"J. Blömer, H. Bröcher, V. Krummel, L.A. Porzenheim, (n.d.).","mla":"Blömer, Johannes, et al. <i>Secure Distributed State Management for Stateful Signatures with a Practical and Universally Composable Protocol</i>.","apa":"Blömer, J., Bröcher, H., Krummel, V., &#38; Porzenheim, L. A. (n.d.). <i>Secure Distributed State Management for Stateful Signatures with a Practical and Universally Composable Protocol</i>."},"page":"22"},{"ddc":["600"],"language":[{"iso":"eng"}],"abstract":[{"lang":"eng","text":"<jats:p>Abstract. Liquid Metal Embrittlement (LME) cracking is a well-documented issue encountered during resistance spot welding (RSW) of zinc-coated advanced high-strength steels (AHSS) in automotive manufacturing. Given that existing research has predominantly focused on laboratory-scale samples and lacks investigation into the load-bearing capacity of joints under crash conditions, this study aims to fill these gaps by analyzing third-generation zinc-coated AHSS. S-Rail components were produced through stamping to replicate real-world manufacturing conditions and geometries of automotive parts. To account for the disturbances typically encountered in production, samples with LME cracks were intentionally fabricated. Subsequently, a modified three-point bending test, assisted by numerical simulations, was developed to effectively apply loads to the weld spots of the S-Rail components. Results from crash tests demonstrated that observed light crack severity does not significantly compromise the joint's load-bearing capacity or lead to earlier joint failure.</jats:p>"}],"license":"https://creativecommons.org/licenses/by-nc/3.0/","file":[{"success":1,"relation":"main_file","content_type":"application/pdf","file_size":1901767,"access_level":"closed","file_name":"Shemat.pdf","file_id":"59092","date_updated":"2025-03-25T08:02:30Z","creator":"kekeyang","date_created":"2025-03-25T08:02:30Z"}],"publication":"Materials Research Proceedings","title":"Influence of Liquid metal embrittlement on load-bearing capacity of resistance spot welds under crash loads: A study based on S-Rail components","publisher":"Materials Research Forum LLC","date_created":"2025-03-25T07:59:49Z","year":"2025","quality_controlled":"1","file_date_updated":"2025-03-25T08:02:30Z","_id":"59091","department":[{"_id":"157"}],"user_id":"65085","status":"public","type":"conference","doi":"10.21741/9781644903551-42","main_file_link":[{"open_access":"1"}],"date_updated":"2025-12-26T13:44:36Z","oa":"1","volume":52,"author":[{"last_name":"Yang","orcid":"0000-0001-9201-9304","id":"65085","full_name":"Yang, Keke","first_name":"Keke"},{"last_name":"Biegler","full_name":"Biegler, Max","first_name":"Max"},{"first_name":"Linus","full_name":"Happe, Linus","last_name":"Happe"},{"id":"30228","full_name":"Striewe, Marius","last_name":"Striewe","first_name":"Marius"},{"first_name":"Viktoria","full_name":"Olfert, Viktoria","id":"5974","last_name":"Olfert"},{"full_name":"Hein, David","id":"7728","last_name":"Hein","first_name":"David"},{"full_name":"Rethmeier, Michael ","last_name":"Rethmeier","first_name":"Michael "},{"first_name":"Gerson","last_name":"Meschut","orcid":"0000-0002-2763-1246","id":"32056","full_name":"Meschut, Gerson"}],"intvolume":"        52","citation":{"mla":"Yang, Keke, et al. “Influence of Liquid Metal Embrittlement on Load-Bearing Capacity of Resistance Spot Welds under Crash Loads: A Study Based on S-Rail Components.” <i>Materials Research Proceedings</i>, vol. 52, Materials Research Forum LLC, 2025, doi:<a href=\"https://doi.org/10.21741/9781644903551-42\">10.21741/9781644903551-42</a>.","short":"K. Yang, M. Biegler, L. Happe, M. Striewe, V. Olfert, D. Hein, M. Rethmeier, G. Meschut, in: Materials Research Proceedings, Materials Research Forum LLC, 2025.","bibtex":"@inproceedings{Yang_Biegler_Happe_Striewe_Olfert_Hein_Rethmeier_Meschut_2025, title={Influence of Liquid metal embrittlement on load-bearing capacity of resistance spot welds under crash loads: A study based on S-Rail components}, volume={52}, DOI={<a href=\"https://doi.org/10.21741/9781644903551-42\">10.21741/9781644903551-42</a>}, booktitle={Materials Research Proceedings}, publisher={Materials Research Forum LLC}, author={Yang, Keke and Biegler, Max and Happe, Linus and Striewe, Marius and Olfert, Viktoria and Hein, David and Rethmeier, Michael  and Meschut, Gerson}, year={2025} }","apa":"Yang, K., Biegler, M., Happe, L., Striewe, M., Olfert, V., Hein, D., Rethmeier, M., &#38; Meschut, G. (2025). Influence of Liquid metal embrittlement on load-bearing capacity of resistance spot welds under crash loads: A study based on S-Rail components. <i>Materials Research Proceedings</i>, <i>52</i>. <a href=\"https://doi.org/10.21741/9781644903551-42\">https://doi.org/10.21741/9781644903551-42</a>","chicago":"Yang, Keke, Max Biegler, Linus Happe, Marius Striewe, Viktoria Olfert, David Hein, Michael  Rethmeier, and Gerson Meschut. “Influence of Liquid Metal Embrittlement on Load-Bearing Capacity of Resistance Spot Welds under Crash Loads: A Study Based on S-Rail Components.” In <i>Materials Research Proceedings</i>, Vol. 52. Materials Research Forum LLC, 2025. <a href=\"https://doi.org/10.21741/9781644903551-42\">https://doi.org/10.21741/9781644903551-42</a>.","ieee":"K. Yang <i>et al.</i>, “Influence of Liquid metal embrittlement on load-bearing capacity of resistance spot welds under crash loads: A study based on S-Rail components,” in <i>Materials Research Proceedings</i>, 2025, vol. 52, doi: <a href=\"https://doi.org/10.21741/9781644903551-42\">10.21741/9781644903551-42</a>.","ama":"Yang K, Biegler M, Happe L, et al. Influence of Liquid metal embrittlement on load-bearing capacity of resistance spot welds under crash loads: A study based on S-Rail components. In: <i>Materials Research Proceedings</i>. Vol 52. Materials Research Forum LLC; 2025. doi:<a href=\"https://doi.org/10.21741/9781644903551-42\">10.21741/9781644903551-42</a>"},"publication_identifier":{"issn":["2474-395X"]},"has_accepted_license":"1","publication_status":"published"},{"publication":"Materials Research Proceedings","abstract":[{"text":"<jats:p>Abstract. In the field of online condition monitoring, non-destructive testing methods using active acoustic testing [1] emerged as innovative tools. These techniques are particularly effective because damage in joined structures leads to significant changes in their vibrational characteristics. However, the consistent use of online condition monitoring through active acoustic testing combined with complex pattern recognition for early crack detection in joined components has not yet been fully established. This research aims to develop an online crack detection system employing pattern recognition techniques under cyclic loading during fatigue tests, utilizing non-contact active acoustic testing with laser vibrometry. Due to the wide range of materials that can be joined, mechanical joining processes can be used in many different industry branches. Self-pierce riveting (SPR), in particular, is a well-established joining process. Therefore, the investigations for online crack detection initially focus on SPR joints. To achieve this, the fatigue behavior of SPR joints in a lap-shear configuration was characterized. Experimental fatigue testing demonstrated that SPR joint failure occurs either through cracks propagating in the sheet material away from the rivet or in the rivet foot, depending on the material combination. Laser vibrometry has been successfully used as a crack detection system and has proven to be effective in detecting crack initiation in SPR joints. Cracks can be detected without contact regardless of the material combination, the damage location, the size of the damage, or the type of damage.  The optimization of the crack detection system involved several key enhancements, including adjusting data acquisition to improve crack detection, incorporating principal component analysis (PCA) to reduce dimensionality, and implementing a classification model based on a global training dataset. An intuitive, problem-specific software demonstrator for analyzing the crack initiation behavior of SPR joints under cyclic loading was developed and iteratively optimized. Future work will focus on the implementation of an autoencoder network to further enhance crack detection capabilities.</jats:p>","lang":"eng"}],"language":[{"iso":"eng"}],"quality_controlled":"1","year":"2025","publisher":"Materials Research Forum LLC","date_created":"2025-07-14T13:25:26Z","title":"Analysis of fatigue behaviour of self-piercing riveted joints under cyclic loading using laser vibrometry","type":"conference","status":"public","_id":"60604","department":[{"_id":"157"}],"user_id":"65085","publication_identifier":{"issn":["2474-395X"]},"publication_status":"published","intvolume":"        54","citation":{"apa":"Olfert, V., Yang, K., Gollnick, M., Krause, J., Hein, D., &#38; Meschut, G. (2025). Analysis of fatigue behaviour of self-piercing riveted joints under cyclic loading using laser vibrometry. <i>Materials Research Proceedings</i>, <i>54</i>. <a href=\"https://doi.org/10.21741/9781644903599-154\">https://doi.org/10.21741/9781644903599-154</a>","short":"V. Olfert, K. Yang, M. Gollnick, J. Krause, D. Hein, G. Meschut, in: Materials Research Proceedings, Materials Research Forum LLC, 2025.","mla":"Olfert, Viktoria, et al. “Analysis of Fatigue Behaviour of Self-Piercing Riveted Joints under Cyclic Loading Using Laser Vibrometry.” <i>Materials Research Proceedings</i>, vol. 54, Materials Research Forum LLC, 2025, doi:<a href=\"https://doi.org/10.21741/9781644903599-154\">10.21741/9781644903599-154</a>.","bibtex":"@inproceedings{Olfert_Yang_Gollnick_Krause_Hein_Meschut_2025, title={Analysis of fatigue behaviour of self-piercing riveted joints under cyclic loading using laser vibrometry}, volume={54}, DOI={<a href=\"https://doi.org/10.21741/9781644903599-154\">10.21741/9781644903599-154</a>}, booktitle={Materials Research Proceedings}, publisher={Materials Research Forum LLC}, author={Olfert, Viktoria and Yang, Keke and Gollnick, Maik and Krause, Jacob and Hein, David and Meschut, Gerson}, year={2025} }","chicago":"Olfert, Viktoria, Keke Yang, Maik Gollnick, Jacob Krause, David Hein, and Gerson Meschut. “Analysis of Fatigue Behaviour of Self-Piercing Riveted Joints under Cyclic Loading Using Laser Vibrometry.” In <i>Materials Research Proceedings</i>, Vol. 54. Materials Research Forum LLC, 2025. <a href=\"https://doi.org/10.21741/9781644903599-154\">https://doi.org/10.21741/9781644903599-154</a>.","ieee":"V. Olfert, K. Yang, M. Gollnick, J. Krause, D. Hein, and G. Meschut, “Analysis of fatigue behaviour of self-piercing riveted joints under cyclic loading using laser vibrometry,” in <i>Materials Research Proceedings</i>, 2025, vol. 54, doi: <a href=\"https://doi.org/10.21741/9781644903599-154\">10.21741/9781644903599-154</a>.","ama":"Olfert V, Yang K, Gollnick M, Krause J, Hein D, Meschut G. Analysis of fatigue behaviour of self-piercing riveted joints under cyclic loading using laser vibrometry. In: <i>Materials Research Proceedings</i>. Vol 54. Materials Research Forum LLC; 2025. doi:<a href=\"https://doi.org/10.21741/9781644903599-154\">10.21741/9781644903599-154</a>"},"date_updated":"2025-12-26T13:45:01Z","oa":"1","volume":54,"author":[{"full_name":"Olfert, Viktoria","id":"5974","last_name":"Olfert","first_name":"Viktoria"},{"full_name":"Yang, Keke","id":"65085","last_name":"Yang","orcid":"0000-0001-9201-9304","first_name":"Keke"},{"full_name":"Gollnick, Maik","last_name":"Gollnick","first_name":"Maik"},{"last_name":"Krause","full_name":"Krause, Jacob","first_name":"Jacob"},{"first_name":"David","last_name":"Hein","full_name":"Hein, David","id":"7728"},{"full_name":"Meschut, Gerson","id":"32056","orcid":"0000-0002-2763-1246","last_name":"Meschut","first_name":"Gerson"}],"doi":"10.21741/9781644903599-154","main_file_link":[{"open_access":"1"}]},{"publication":"Festschrift - Mary Ellen Waithe","type":"book_chapter","editor":[{"first_name":"Ruth Edith","last_name":"Hagengruber","full_name":"Hagengruber, Ruth Edith"}],"status":"public","_id":"55089","department":[{"_id":"519"}],"user_id":"32146","language":[{"iso":"eng"}],"publication_status":"submitted","place":"Berlin","year":"2025","citation":{"ama":"Grewe F. Rebellious Witnesses: Why a Reorientation of Patriarchal Scientific and Social Culture is Urgently Needed. In: Hagengruber RE, ed. <i>Festschrift - Mary Ellen Waithe</i>. Springer.","chicago":"Grewe, Felix. “Rebellious Witnesses: Why a Reorientation of Patriarchal Scientific and Social Culture Is Urgently Needed.” In <i>Festschrift - Mary Ellen Waithe</i>, edited by Ruth Edith Hagengruber. Berlin: Springer, n.d.","ieee":"F. Grewe, “Rebellious Witnesses: Why a Reorientation of Patriarchal Scientific and Social Culture is Urgently Needed,” in <i>Festschrift - Mary Ellen Waithe</i>, R. E. Hagengruber, Ed. Berlin: Springer.","bibtex":"@inbook{Grewe, place={Berlin}, title={Rebellious Witnesses: Why a Reorientation of Patriarchal Scientific and Social Culture is Urgently Needed}, booktitle={Festschrift - Mary Ellen Waithe}, publisher={Springer}, author={Grewe, Felix}, editor={Hagengruber, Ruth Edith} }","short":"F. Grewe, in: R.E. Hagengruber (Ed.), Festschrift - Mary Ellen Waithe, Springer, Berlin, n.d.","mla":"Grewe, Felix. “Rebellious Witnesses: Why a Reorientation of Patriarchal Scientific and Social Culture Is Urgently Needed.” <i>Festschrift - Mary Ellen Waithe</i>, edited by Ruth Edith Hagengruber, Springer.","apa":"Grewe, F. (n.d.). Rebellious Witnesses: Why a Reorientation of Patriarchal Scientific and Social Culture is Urgently Needed. In R. E. Hagengruber (Ed.), <i>Festschrift - Mary Ellen Waithe</i>. Springer."},"publisher":"Springer","date_updated":"2025-12-29T08:53:27Z","author":[{"last_name":"Grewe","id":"32146","full_name":"Grewe, Felix","first_name":"Felix"}],"date_created":"2024-07-05T09:37:08Z","title":"Rebellious Witnesses: Why a Reorientation of Patriarchal Scientific and Social Culture is Urgently Needed"},{"issue":"3","quality_controlled":"1","publication_status":"published","page":"17-30","intvolume":"        17","citation":{"apa":"Intveen, J., &#38; Illigens, T. (2025). Beyond The Episode: A Case For Serial Literacy in EFL Education. <i>Journal of Media Literacy Education</i>, <i>17</i>(3), 17–30. <a href=\"https://doi.org/10.23860/JMLE-2025-17-3-3\">https://doi.org/10.23860/JMLE-2025-17-3-3</a>","mla":"Intveen, Julie, and Tim Illigens. “Beyond The Episode: A Case For Serial Literacy in EFL Education.” <i>Journal of Media Literacy Education</i>, vol. 17, no. 3, The University of Rhode Island, 2025, pp. 17–30, doi:<a href=\"https://doi.org/10.23860/JMLE-2025-17-3-3\">https://doi.org/10.23860/JMLE-2025-17-3-3</a>.","short":"J. Intveen, T. Illigens, Journal of Media Literacy Education 17 (2025) 17–30.","bibtex":"@article{Intveen_Illigens_2025, title={Beyond The Episode: A Case For Serial Literacy in EFL Education}, volume={17}, DOI={<a href=\"https://doi.org/10.23860/JMLE-2025-17-3-3\">https://doi.org/10.23860/JMLE-2025-17-3-3</a>}, number={3}, journal={Journal of Media Literacy Education}, publisher={The University of Rhode Island}, author={Intveen, Julie and Illigens, Tim}, year={2025}, pages={17–30} }","ama":"Intveen J, Illigens T. Beyond The Episode: A Case For Serial Literacy in EFL Education. <i>Journal of Media Literacy Education</i>. 2025;17(3):17-30. doi:<a href=\"https://doi.org/10.23860/JMLE-2025-17-3-3\">https://doi.org/10.23860/JMLE-2025-17-3-3</a>","chicago":"Intveen, Julie, and Tim Illigens. “Beyond The Episode: A Case For Serial Literacy in EFL Education.” <i>Journal of Media Literacy Education</i> 17, no. 3 (2025): 17–30. <a href=\"https://doi.org/10.23860/JMLE-2025-17-3-3\">https://doi.org/10.23860/JMLE-2025-17-3-3</a>.","ieee":"J. Intveen and T. Illigens, “Beyond The Episode: A Case For Serial Literacy in EFL Education,” <i>Journal of Media Literacy Education</i>, vol. 17, no. 3, pp. 17–30, 2025, doi: <a href=\"https://doi.org/10.23860/JMLE-2025-17-3-3\">https://doi.org/10.23860/JMLE-2025-17-3-3</a>."},"year":"2025","volume":17,"author":[{"first_name":"Julie","last_name":"Intveen","full_name":"Intveen, Julie","id":"56558"},{"full_name":"Illigens, Tim","last_name":"Illigens","first_name":"Tim"}],"date_created":"2025-02-13T14:13:41Z","date_updated":"2025-12-29T19:44:22Z","publisher":"The University of Rhode Island","doi":"https://doi.org/10.23860/JMLE-2025-17-3-3","title":"Beyond The Episode: A Case For Serial Literacy in EFL Education","publication":"Journal of Media Literacy Education","type":"journal_article","status":"public","abstract":[{"lang":"eng","text":"Serial storytelling, characterized by its interplay of vertical (episodic) and horizontal (long-form) narrative structures, offers a unique opportunity for media literacy in English as a Foreign Language (EFL) education. This paper argues for the development of a serial literacy framework, a concept that expands traditional film literacy models to accommodate the distinct demands of serialized narratives. By using Inventing Anna (Rhimes, 2022) as a case study, the study explores how serial storytelling fosters engagement with themes of identity construction, ethical ambiguity, and transmedial storytelling. This paper elaborates on serial literacy, considering its implications within foreign language learning contexts. The study highlights how serialized narratives cultivate critical thinking, communicative competence, and media awareness, which renders them a valuable pedagogical tool. By integrating serial literacy into EFL curricula, educators can bridge students’ media consumption habits with analytical engagement and thus foster a generation of critically literate media consumers and producers.\r\n\r\nThis paper elaborates on serial literacy, considering its implications within foreign language learning contexts. The study highlights how serialized narratives cultivate critical thinking, communicative competence, and media awareness, which renders them a valuable pedagogical tool. By integrating serial literacy into EFL curricula, educators can bridge students' media consumption habits with analytical engagement and thus foster a generation of critically literate media consumers and producers.\r\n"}],"user_id":"56558","_id":"58623","language":[{"iso":"eng"}],"article_type":"original"},{"status":"public","type":"journal_article","publication":"MEIN FACH - Englisch Sek II","language":[{"iso":"eng"}],"_id":"61447","user_id":"56558","year":"2025","citation":{"ama":"Intveen J, Janzen T. The Political Era of Taylor Swift - Exploring the influence of Miss Americana at the ballot box. <i>MEIN FACH - Englisch Sek II</i>. 2025;6:1-5.","ieee":"J. Intveen and T. Janzen, “The Political Era of Taylor Swift - Exploring the influence of Miss Americana at the ballot box,” <i>MEIN FACH - Englisch Sek II</i>, vol. 6, pp. 1–5, 2025.","chicago":"Intveen, Julie, and Thomas Janzen. “The Political Era of Taylor Swift - Exploring the Influence of Miss Americana at the Ballot Box.” <i>MEIN FACH - Englisch Sek II</i> 6 (2025): 1–5.","bibtex":"@article{Intveen_Janzen_2025, title={The Political Era of Taylor Swift - Exploring the influence of Miss Americana at the ballot box}, volume={6}, journal={MEIN FACH - Englisch Sek II}, publisher={Bergmoser + Höller}, author={Intveen, Julie and Janzen, Thomas}, year={2025}, pages={1–5} }","mla":"Intveen, Julie, and Thomas Janzen. “The Political Era of Taylor Swift - Exploring the Influence of Miss Americana at the Ballot Box.” <i>MEIN FACH - Englisch Sek II</i>, vol. 6, Bergmoser + Höller, 2025, pp. 1–5.","short":"J. Intveen, T. Janzen, MEIN FACH - Englisch Sek II 6 (2025) 1–5.","apa":"Intveen, J., &#38; Janzen, T. (2025). The Political Era of Taylor Swift - Exploring the influence of Miss Americana at the ballot box. <i>MEIN FACH - Englisch Sek II</i>, <i>6</i>, 1–5."},"page":"1-5","intvolume":"         6","publication_status":"published","title":"The Political Era of Taylor Swift - Exploring the influence of Miss Americana at the ballot box","date_updated":"2025-12-29T19:44:16Z","publisher":"Bergmoser + Höller","date_created":"2025-09-26T12:58:54Z","author":[{"last_name":"Intveen","id":"56558","full_name":"Intveen, Julie","first_name":"Julie"},{"last_name":"Janzen","full_name":"Janzen, Thomas","first_name":"Thomas"}],"volume":6},{"doi":"https://doi.org/10.1109/PIERS-Spring66516.2025.11276835","conference":{"name":"PhotonIcs and Electromagnetics Research Symposium (PIERS)","start_date":"2025-05-03","end_date":"2025-05-09","location":"Abu Dhabi"},"title":"Broadband Nyquist Pulse Generation on TFLN Platform for Integrated Quantum Source","date_created":"2025-05-14T09:59:50Z","author":[{"first_name":"Christian","id":"13256","full_name":"Kress, Christian","last_name":"Kress","orcid":"0000-0002-4403-2237"},{"first_name":"Martin Miroslavov","last_name":"Mihaylov","id":"42449","full_name":"Mihaylov, Martin Miroslavov"},{"full_name":"Schwabe, Tobias","id":"39217","last_name":"Schwabe","first_name":"Tobias"},{"last_name":"Silberhorn","id":"26263","full_name":"Silberhorn, Christine","first_name":"Christine"},{"full_name":"Scheytt, J. Christoph","id":"37144","last_name":"Scheytt","orcid":"0000-0002-5950-6618 ","first_name":"J. Christoph"}],"date_updated":"2026-01-02T14:29:41Z","publisher":"PhotonIcs and Electromagnetics Research Symposium (PIERS)","citation":{"ama":"Kress C, Mihaylov MM, Schwabe T, Silberhorn C, Scheytt JC. Broadband Nyquist Pulse Generation on TFLN Platform for Integrated Quantum Source. In: <i>PIERS Proceedings </i>. PhotonIcs and Electromagnetics Research Symposium (PIERS). doi:<a href=\"https://doi.org/10.1109/PIERS-Spring66516.2025.11276835\">https://doi.org/10.1109/PIERS-Spring66516.2025.11276835</a>","chicago":"Kress, Christian, Martin Miroslavov Mihaylov, Tobias Schwabe, Christine Silberhorn, and J. Christoph Scheytt. “Broadband Nyquist Pulse Generation on TFLN Platform for Integrated Quantum Source.” In <i>PIERS Proceedings </i>. PhotonIcs and Electromagnetics Research Symposium (PIERS), n.d. <a href=\"https://doi.org/10.1109/PIERS-Spring66516.2025.11276835\">https://doi.org/10.1109/PIERS-Spring66516.2025.11276835</a>.","ieee":"C. Kress, M. M. Mihaylov, T. Schwabe, C. Silberhorn, and J. C. Scheytt, “Broadband Nyquist Pulse Generation on TFLN Platform for Integrated Quantum Source,” presented at the PhotonIcs and Electromagnetics Research Symposium (PIERS), Abu Dhabi, doi: <a href=\"https://doi.org/10.1109/PIERS-Spring66516.2025.11276835\">https://doi.org/10.1109/PIERS-Spring66516.2025.11276835</a>.","short":"C. Kress, M.M. Mihaylov, T. Schwabe, C. Silberhorn, J.C. Scheytt, in: PIERS Proceedings , PhotonIcs and Electromagnetics Research Symposium (PIERS), n.d.","mla":"Kress, Christian, et al. “Broadband Nyquist Pulse Generation on TFLN Platform for Integrated Quantum Source.” <i>PIERS Proceedings </i>, PhotonIcs and Electromagnetics Research Symposium (PIERS), doi:<a href=\"https://doi.org/10.1109/PIERS-Spring66516.2025.11276835\">https://doi.org/10.1109/PIERS-Spring66516.2025.11276835</a>.","bibtex":"@inproceedings{Kress_Mihaylov_Schwabe_Silberhorn_Scheytt, title={Broadband Nyquist Pulse Generation on TFLN Platform for Integrated Quantum Source}, DOI={<a href=\"https://doi.org/10.1109/PIERS-Spring66516.2025.11276835\">https://doi.org/10.1109/PIERS-Spring66516.2025.11276835</a>}, booktitle={PIERS Proceedings }, publisher={PhotonIcs and Electromagnetics Research Symposium (PIERS)}, author={Kress, Christian and Mihaylov, Martin Miroslavov and Schwabe, Tobias and Silberhorn, Christine and Scheytt, J. Christoph} }","apa":"Kress, C., Mihaylov, M. M., Schwabe, T., Silberhorn, C., &#38; Scheytt, J. C. (n.d.). Broadband Nyquist Pulse Generation on TFLN Platform for Integrated Quantum Source. <i>PIERS Proceedings </i>. PhotonIcs and Electromagnetics Research Symposium (PIERS), Abu Dhabi. <a href=\"https://doi.org/10.1109/PIERS-Spring66516.2025.11276835\">https://doi.org/10.1109/PIERS-Spring66516.2025.11276835</a>"},"year":"2025","publication_status":"accepted","language":[{"iso":"eng"}],"department":[{"_id":"58"},{"_id":"623"}],"user_id":"13256","_id":"59895","project":[{"name":"PONyDAC: SPP 2111 - PONyDAC II - Präziser Optischer Nyquist-Puls-Synthesizer DAC","_id":"302"},{"name":"TRR 142 - C11: TRR 142 - Kompakte Photonenpaar-Quelle mit ultraschnellen Modulatoren auf Basis von CMOS und LNOI (C11*)","_id":"175"}],"status":"public","abstract":[{"text":"The generation of optically broadband Nyquist pulse sequences using an integrated Mach-Zehnder modulator (MZM) in a thin-film lithium-niobate (TFLN) platform with repetition rates of 5 to 32 GHz and optical bandwidths of up to 160 GHz is demonstrated. Nyquist pulse sequences with high optical bandwidth can be used as synchronization and control signals in quantum sources based on photon pair generation.","lang":"eng"}],"publication":"PIERS Proceedings ","type":"conference"},{"quality_controlled":"1","citation":{"bibtex":"@inproceedings{Hoffmann_2025, title={Using scriptwriting as a response format for interface tasks: Exemplary analyses in the context of symmetry}, booktitle={Proceedings of the Fourteenth Congress of the European Society for Research in Mathematics Education (CERME14)}, author={Hoffmann, Max}, editor={Bosch, Marianna and Bolondi, Giorgio and Carreira, Susana and Michael, Gaidoschik and Camilla, Spagnolo}, year={2025} }","mla":"Hoffmann, Max. “Using Scriptwriting as a Response Format for Interface Tasks: Exemplary Analyses in the Context of Symmetry.” <i>Proceedings of the Fourteenth Congress of the European Society for Research in Mathematics Education (CERME14)</i>, edited by Marianna Bosch et al., 2025.","short":"M. Hoffmann, in: M. Bosch, G. Bolondi, S. Carreira, G. Michael, S. Camilla (Eds.), Proceedings of the Fourteenth Congress of the European Society for Research in Mathematics Education (CERME14), 2025.","apa":"Hoffmann, M. (2025). Using scriptwriting as a response format for interface tasks: Exemplary analyses in the context of symmetry. In M. Bosch, G. Bolondi, S. Carreira, G. Michael, &#38; S. Camilla (Eds.), <i>Proceedings of the Fourteenth Congress of the European Society for Research in Mathematics Education (CERME14)</i>.","ieee":"M. Hoffmann, “Using scriptwriting as a response format for interface tasks: Exemplary analyses in the context of symmetry,” in <i>Proceedings of the Fourteenth Congress of the European Society for Research in Mathematics Education (CERME14)</i>, 2025.","chicago":"Hoffmann, Max. “Using Scriptwriting as a Response Format for Interface Tasks: Exemplary Analyses in the Context of Symmetry.” In <i>Proceedings of the Fourteenth Congress of the European Society for Research in Mathematics Education (CERME14)</i>, edited by Marianna Bosch, Giorgio Bolondi, Susana Carreira, Gaidoschik Michael, and Spagnolo Camilla, 2025.","ama":"Hoffmann M. Using scriptwriting as a response format for interface tasks: Exemplary analyses in the context of symmetry. In: Bosch M, Bolondi G, Carreira S, Michael G, Camilla S, eds. <i>Proceedings of the Fourteenth Congress of the European Society for Research in Mathematics Education (CERME14)</i>. ; 2025."},"year":"2025","author":[{"last_name":"Hoffmann","full_name":"Hoffmann, Max","first_name":"Max"}],"date_created":"2026-01-04T21:26:04Z","oa":"1","date_updated":"2026-01-04T21:29:36Z","main_file_link":[{"open_access":"1","url":"https://hal.science/CERME14/hal-05237875v1"}],"title":"Using scriptwriting as a response format for interface tasks: Exemplary analyses in the context of symmetry","publication":"Proceedings of the Fourteenth Congress of the European Society for Research in Mathematics Education (CERME14)","type":"conference","status":"public","editor":[{"first_name":"Marianna","full_name":"Bosch, Marianna","last_name":"Bosch"},{"last_name":"Bolondi","full_name":"Bolondi, Giorgio","first_name":"Giorgio"},{"full_name":"Carreira, Susana","last_name":"Carreira","first_name":"Susana"},{"first_name":"Gaidoschik","full_name":"Michael, Gaidoschik","last_name":"Michael"},{"last_name":"Camilla","full_name":"Camilla, Spagnolo","first_name":"Spagnolo"}],"department":[{"_id":"97"},{"_id":"643"}],"user_id":"32202","_id":"63434","language":[{"iso":"eng"}],"keyword":["hoffmann","reviewed","proceedings"]},{"title":"Digitale Perspektiven auf das Heron-Verfahren","doi":"https://doi.org/10.5555/ml-253-2025_07","date_updated":"2026-01-04T17:38:00Z","author":[{"full_name":"Hoffmann, Max","id":"32202","last_name":"Hoffmann","orcid":"0000-0002-6964-7123","first_name":"Max"}],"date_created":"2026-01-04T17:37:54Z","year":"2025","citation":{"ama":"Hoffmann M. Digitale Perspektiven auf das Heron-Verfahren. <i>mathematik lehren</i>. 2025;(253):39-44. doi:<a href=\"https://doi.org/10.5555/ml-253-2025_07\">https://doi.org/10.5555/ml-253-2025_07</a>","chicago":"Hoffmann, Max. “Digitale Perspektiven auf das Heron-Verfahren.” <i>mathematik lehren</i>, no. 253 (2025): 39–44. <a href=\"https://doi.org/10.5555/ml-253-2025_07\">https://doi.org/10.5555/ml-253-2025_07</a>.","ieee":"M. Hoffmann, “Digitale Perspektiven auf das Heron-Verfahren,” <i>mathematik lehren</i>, no. 253, pp. 39–44, 2025, doi: <a href=\"https://doi.org/10.5555/ml-253-2025_07\">https://doi.org/10.5555/ml-253-2025_07</a>.","short":"M. Hoffmann, mathematik lehren (2025) 39–44.","bibtex":"@article{Hoffmann_2025, title={Digitale Perspektiven auf das Heron-Verfahren}, DOI={<a href=\"https://doi.org/10.5555/ml-253-2025_07\">https://doi.org/10.5555/ml-253-2025_07</a>}, number={253}, journal={mathematik lehren}, author={Hoffmann, Max}, year={2025}, pages={39–44} }","mla":"Hoffmann, Max. “Digitale Perspektiven auf das Heron-Verfahren.” <i>mathematik lehren</i>, no. 253, 2025, pp. 39–44, doi:<a href=\"https://doi.org/10.5555/ml-253-2025_07\">https://doi.org/10.5555/ml-253-2025_07</a>.","apa":"Hoffmann, M. (2025). Digitale Perspektiven auf das Heron-Verfahren. <i>mathematik lehren</i>, <i>253</i>, 39–44. <a href=\"https://doi.org/10.5555/ml-253-2025_07\">https://doi.org/10.5555/ml-253-2025_07</a>"},"page":"39-44","publication_status":"published","issue":"253","article_type":"original","language":[{"iso":"ger"}],"_id":"63433","user_id":"32202","department":[{"_id":"97"},{"_id":"643"}],"status":"public","popular_science":"1","type":"journal_article","publication":"mathematik lehren"},{"status":"public","type":"journal_article","publication":"Acta Acustica","language":[{"iso":"eng"}],"article_type":"original","user_id":"11829","department":[{"_id":"49"}],"project":[{"name":"Computing Resources Provided by the Paderborn Center for Parallel Computing","_id":"52"},{"_id":"245","name":"FOR 5208: Modellbasierte Bestimmung nichtlinearer Eigenschaften von Piezokeramiken für Leistungsschallanwendungen (NEPTUN)"}],"_id":"62000","citation":{"chicago":"Claes, Leander, Kevin Koch, Olga Friesen, and Lars Meihost. “Machine Learning-Supported Inverse Measurement Procedure for Broadband, Temperature Dependent Piezoelectric Material Parameters.” <i>Acta Acustica</i> 9, no. 65 (2025). <a href=\"https://doi.org/10.1051/aacus/2025044\">https://doi.org/10.1051/aacus/2025044</a>.","ieee":"L. Claes, K. Koch, O. Friesen, and L. Meihost, “Machine Learning-Supported Inverse Measurement Procedure for Broadband, Temperature Dependent Piezoelectric Material Parameters,” <i>Acta Acustica</i>, vol. 9, no. 65, 2025, doi: <a href=\"https://doi.org/10.1051/aacus/2025044\">10.1051/aacus/2025044</a>.","ama":"Claes L, Koch K, Friesen O, Meihost L. Machine Learning-Supported Inverse Measurement Procedure for Broadband, Temperature Dependent Piezoelectric Material Parameters. <i>Acta Acustica</i>. 2025;9(65). doi:<a href=\"https://doi.org/10.1051/aacus/2025044\">10.1051/aacus/2025044</a>","apa":"Claes, L., Koch, K., Friesen, O., &#38; Meihost, L. (2025). Machine Learning-Supported Inverse Measurement Procedure for Broadband, Temperature Dependent Piezoelectric Material Parameters. <i>Acta Acustica</i>, <i>9</i>(65). <a href=\"https://doi.org/10.1051/aacus/2025044\">https://doi.org/10.1051/aacus/2025044</a>","short":"L. Claes, K. Koch, O. Friesen, L. Meihost, Acta Acustica 9 (2025).","mla":"Claes, Leander, et al. “Machine Learning-Supported Inverse Measurement Procedure for Broadband, Temperature Dependent Piezoelectric Material Parameters.” <i>Acta Acustica</i>, vol. 9, no. 65, EDP Sciences, 2025, doi:<a href=\"https://doi.org/10.1051/aacus/2025044\">10.1051/aacus/2025044</a>.","bibtex":"@article{Claes_Koch_Friesen_Meihost_2025, title={Machine Learning-Supported Inverse Measurement Procedure for Broadband, Temperature Dependent Piezoelectric Material Parameters}, volume={9}, DOI={<a href=\"https://doi.org/10.1051/aacus/2025044\">10.1051/aacus/2025044</a>}, number={65}, journal={Acta Acustica}, publisher={EDP Sciences}, author={Claes, Leander and Koch, Kevin and Friesen, Olga and Meihost, Lars}, year={2025} }"},"intvolume":"         9","year":"2025","issue":"65","publication_status":"published","publication_identifier":{"issn":["2681-4617"]},"main_file_link":[{"url":"https://acta-acustica.edpsciences.org/articles/aacus/abs/2025/01/aacus250049/aacus250049.html","open_access":"1"}],"doi":"10.1051/aacus/2025044","title":"Machine Learning-Supported Inverse Measurement Procedure for Broadband, Temperature Dependent Piezoelectric Material Parameters","date_created":"2025-10-27T08:20:53Z","author":[{"last_name":"Claes","orcid":"0000-0002-4393-268X","id":"11829","full_name":"Claes, Leander","first_name":"Leander"},{"last_name":"Koch","full_name":"Koch, Kevin","first_name":"Kevin"},{"first_name":"Olga","id":"44026","full_name":"Friesen, Olga","last_name":"Friesen"},{"id":"24769","full_name":"Meihost, Lars","last_name":"Meihost","first_name":"Lars"}],"volume":9,"date_updated":"2026-01-05T08:00:05Z","oa":"1","publisher":"EDP Sciences"},{"language":[{"iso":"eng"}],"external_id":{"arxiv":["2411.14900"]},"publication":"Mathematical Models and Methods in Applied Sciences","title":"A model for heat generation by acoustic waves in piezoelectric materials: Global large-data solutions","date_created":"2024-06-20T13:43:42Z","publisher":"World Scientific Pub Co Pte Ltd","year":"2025","issue":"11","department":[{"_id":"90"},{"_id":"49"}],"user_id":"11829","_id":"54837","project":[{"_id":"245","name":"FOR 5208: Modellbasierte Bestimmung nichtlinearer Eigenschaften von Piezokeramiken für Leistungsschallanwendungen (NEPTUN)"}],"status":"public","type":"journal_article","doi":"10.1142/s0218202525500447","main_file_link":[{"open_access":"1","url":"https://arxiv.org/pdf/2411.14900"}],"volume":35,"author":[{"first_name":"Leander","last_name":"Claes","orcid":"0000-0002-4393-268X","full_name":"Claes, Leander","id":"11829"},{"first_name":"Johannes","last_name":"Lankeit","full_name":"Lankeit, Johannes"},{"first_name":"Michael","id":"31496","full_name":"Winkler, Michael","last_name":"Winkler"}],"date_updated":"2026-01-05T07:59:41Z","oa":"1","page":"2465-2512","intvolume":"        35","citation":{"ama":"Claes L, Lankeit J, Winkler M. A model for heat generation by acoustic waves in piezoelectric materials: Global large-data solutions. <i>Mathematical Models and Methods in Applied Sciences</i>. 2025;35(11):2465-2512. doi:<a href=\"https://doi.org/10.1142/s0218202525500447\">10.1142/s0218202525500447</a>","ieee":"L. Claes, J. Lankeit, and M. Winkler, “A model for heat generation by acoustic waves in piezoelectric materials: Global large-data solutions,” <i>Mathematical Models and Methods in Applied Sciences</i>, vol. 35, no. 11, pp. 2465–2512, 2025, doi: <a href=\"https://doi.org/10.1142/s0218202525500447\">10.1142/s0218202525500447</a>.","chicago":"Claes, Leander, Johannes Lankeit, and Michael Winkler. “A Model for Heat Generation by Acoustic Waves in Piezoelectric Materials: Global Large-Data Solutions.” <i>Mathematical Models and Methods in Applied Sciences</i> 35, no. 11 (2025): 2465–2512. <a href=\"https://doi.org/10.1142/s0218202525500447\">https://doi.org/10.1142/s0218202525500447</a>.","apa":"Claes, L., Lankeit, J., &#38; Winkler, M. (2025). A model for heat generation by acoustic waves in piezoelectric materials: Global large-data solutions. <i>Mathematical Models and Methods in Applied Sciences</i>, <i>35</i>(11), 2465–2512. <a href=\"https://doi.org/10.1142/s0218202525500447\">https://doi.org/10.1142/s0218202525500447</a>","short":"L. Claes, J. Lankeit, M. Winkler, Mathematical Models and Methods in Applied Sciences 35 (2025) 2465–2512.","mla":"Claes, Leander, et al. “A Model for Heat Generation by Acoustic Waves in Piezoelectric Materials: Global Large-Data Solutions.” <i>Mathematical Models and Methods in Applied Sciences</i>, vol. 35, no. 11, World Scientific Pub Co Pte Ltd, 2025, pp. 2465–512, doi:<a href=\"https://doi.org/10.1142/s0218202525500447\">10.1142/s0218202525500447</a>.","bibtex":"@article{Claes_Lankeit_Winkler_2025, title={A model for heat generation by acoustic waves in piezoelectric materials: Global large-data solutions}, volume={35}, DOI={<a href=\"https://doi.org/10.1142/s0218202525500447\">10.1142/s0218202525500447</a>}, number={11}, journal={Mathematical Models and Methods in Applied Sciences}, publisher={World Scientific Pub Co Pte Ltd}, author={Claes, Leander and Lankeit, Johannes and Winkler, Michael}, year={2025}, pages={2465–2512} }"},"publication_identifier":{"issn":["1793-6314"]}},{"status":"public","type":"conference","publication":"2025 International Congress on Ultrasonics","language":[{"iso":"eng"}],"user_id":"11829","department":[{"_id":"49"},{"_id":"151"}],"project":[{"name":"FOR 5208: Modellbasierte Bestimmung nichtlinearer Eigenschaften von Piezokeramiken für Leistungsschallanwendungen (NEPTUN)","_id":"245"}],"_id":"62299","citation":{"chicago":"Friesen, Olga, Claus Scheidemann, Leander Claes, Tobias Hemsel, and Bernd Henning. “Sensitivity Analysis and Material Parameter Estimation of a Pre-Stressed Langevin Transducer.” In <i>2025 International Congress on Ultrasonics</i>, 138–141. Paderborn: AMA Service GmbH, 2025. <a href=\"https://doi.org/10.5162/ultrasonic2025/a18-a4\">https://doi.org/10.5162/ultrasonic2025/a18-a4</a>.","ieee":"O. Friesen, C. Scheidemann, L. Claes, T. Hemsel, and B. Henning, “Sensitivity Analysis and Material Parameter Estimation of a Pre-Stressed Langevin Transducer,” in <i>2025 International Congress on Ultrasonics</i>, 2025, pp. 138–141, doi: <a href=\"https://doi.org/10.5162/ultrasonic2025/a18-a4\">10.5162/ultrasonic2025/a18-a4</a>.","ama":"Friesen O, Scheidemann C, Claes L, Hemsel T, Henning B. Sensitivity Analysis and Material Parameter Estimation of a Pre-Stressed Langevin Transducer. In: <i>2025 International Congress on Ultrasonics</i>. AMA Service GmbH; 2025:138–141. doi:<a href=\"https://doi.org/10.5162/ultrasonic2025/a18-a4\">10.5162/ultrasonic2025/a18-a4</a>","short":"O. Friesen, C. Scheidemann, L. Claes, T. Hemsel, B. Henning, in: 2025 International Congress on Ultrasonics, AMA Service GmbH, Paderborn, 2025, pp. 138–141.","mla":"Friesen, Olga, et al. “Sensitivity Analysis and Material Parameter Estimation of a Pre-Stressed Langevin Transducer.” <i>2025 International Congress on Ultrasonics</i>, AMA Service GmbH, 2025, pp. 138–141, doi:<a href=\"https://doi.org/10.5162/ultrasonic2025/a18-a4\">10.5162/ultrasonic2025/a18-a4</a>.","bibtex":"@inproceedings{Friesen_Scheidemann_Claes_Hemsel_Henning_2025, place={Paderborn}, title={Sensitivity Analysis and Material Parameter Estimation of a Pre-Stressed Langevin Transducer}, DOI={<a href=\"https://doi.org/10.5162/ultrasonic2025/a18-a4\">10.5162/ultrasonic2025/a18-a4</a>}, booktitle={2025 International Congress on Ultrasonics}, publisher={AMA Service GmbH}, author={Friesen, Olga and Scheidemann, Claus and Claes, Leander and Hemsel, Tobias and Henning, Bernd}, year={2025}, pages={138–141} }","apa":"Friesen, O., Scheidemann, C., Claes, L., Hemsel, T., &#38; Henning, B. (2025). Sensitivity Analysis and Material Parameter Estimation of a Pre-Stressed Langevin Transducer. <i>2025 International Congress on Ultrasonics</i>, 138–141. <a href=\"https://doi.org/10.5162/ultrasonic2025/a18-a4\">https://doi.org/10.5162/ultrasonic2025/a18-a4</a>"},"page":"138–141","year":"2025","place":"Paderborn","doi":"10.5162/ultrasonic2025/a18-a4","title":"Sensitivity Analysis and Material Parameter Estimation of a Pre-Stressed Langevin Transducer","author":[{"full_name":"Friesen, Olga","id":"44026","last_name":"Friesen","first_name":"Olga"},{"last_name":"Scheidemann","full_name":"Scheidemann, Claus","id":"38259","first_name":"Claus"},{"first_name":"Leander","id":"11829","full_name":"Claes, Leander","last_name":"Claes","orcid":"0000-0002-4393-268X"},{"last_name":"Hemsel","full_name":"Hemsel, Tobias","id":"210","first_name":"Tobias"},{"full_name":"Henning, Bernd","id":"213","last_name":"Henning","first_name":"Bernd"}],"date_created":"2025-11-25T12:23:06Z","date_updated":"2026-01-05T08:00:48Z","publisher":"AMA Service GmbH"},{"status":"public","type":"conference","publication":"2025 International Congress on Ultrasonics","language":[{"iso":"eng"}],"user_id":"11829","department":[{"_id":"49"}],"project":[{"name":"FOR 5208: Modellbasierte Bestimmung nichtlinearer Eigenschaften von Piezokeramiken für Leistungsschallanwendungen (NEPTUN)","_id":"245"}],"_id":"62298","citation":{"apa":"Kuess, R., Friesen, O., Henning, B., &#38; Walther, A. (2025). Identification of temperature-dependent material parameter functions in piezoelectricity. <i>2025 International Congress on Ultrasonics</i>, 134–137. <a href=\"https://doi.org/10.5162/ultrasonic2025/a18-a3\">https://doi.org/10.5162/ultrasonic2025/a18-a3</a>","bibtex":"@inproceedings{Kuess_Friesen_Henning_Walther_2025, place={Germany}, title={Identification of temperature-dependent material parameter functions in piezoelectricity}, DOI={<a href=\"https://doi.org/10.5162/ultrasonic2025/a18-a3\">10.5162/ultrasonic2025/a18-a3</a>}, booktitle={2025 International Congress on Ultrasonics}, publisher={AMA Service GmbH}, author={Kuess, Raphael and Friesen, Olga and Henning, Bernd and Walther, Andrea}, year={2025}, pages={134–137} }","mla":"Kuess, Raphael, et al. “Identification of Temperature-Dependent Material Parameter Functions in Piezoelectricity.” <i>2025 International Congress on Ultrasonics</i>, AMA Service GmbH, 2025, pp. 134–137, doi:<a href=\"https://doi.org/10.5162/ultrasonic2025/a18-a3\">10.5162/ultrasonic2025/a18-a3</a>.","short":"R. Kuess, O. Friesen, B. Henning, A. Walther, in: 2025 International Congress on Ultrasonics, AMA Service GmbH, Germany, 2025, pp. 134–137.","ama":"Kuess R, Friesen O, Henning B, Walther A. Identification of temperature-dependent material parameter functions in piezoelectricity. In: <i>2025 International Congress on Ultrasonics</i>. AMA Service GmbH; 2025:134–137. doi:<a href=\"https://doi.org/10.5162/ultrasonic2025/a18-a3\">10.5162/ultrasonic2025/a18-a3</a>","ieee":"R. Kuess, O. Friesen, B. Henning, and A. Walther, “Identification of temperature-dependent material parameter functions in piezoelectricity,” in <i>2025 International Congress on Ultrasonics</i>, 2025, pp. 134–137, doi: <a href=\"https://doi.org/10.5162/ultrasonic2025/a18-a3\">10.5162/ultrasonic2025/a18-a3</a>.","chicago":"Kuess, Raphael, Olga Friesen, Bernd Henning, and Andrea Walther. “Identification of Temperature-Dependent Material Parameter Functions in Piezoelectricity.” In <i>2025 International Congress on Ultrasonics</i>, 134–137. Germany: AMA Service GmbH, 2025. <a href=\"https://doi.org/10.5162/ultrasonic2025/a18-a3\">https://doi.org/10.5162/ultrasonic2025/a18-a3</a>."},"page":"134–137","year":"2025","place":"Germany","doi":"10.5162/ultrasonic2025/a18-a3","title":"Identification of temperature-dependent material parameter functions in piezoelectricity","author":[{"full_name":"Kuess, Raphael","last_name":"Kuess","first_name":"Raphael"},{"id":"44026","full_name":"Friesen, Olga","last_name":"Friesen","first_name":"Olga"},{"first_name":"Bernd","last_name":"Henning","full_name":"Henning, Bernd","id":"213"},{"first_name":"Andrea","full_name":"Walther, Andrea","last_name":"Walther"}],"date_created":"2025-11-25T12:23:06Z","date_updated":"2026-01-05T08:01:47Z","publisher":"AMA Service GmbH"},{"date_created":"2025-04-25T08:51:32Z","author":[{"last_name":"Friesen","full_name":"Friesen, Olga","id":"44026","first_name":"Olga"},{"id":"24769","full_name":"Meihost, Lars","last_name":"Meihost","first_name":"Lars"},{"first_name":"Kevin","full_name":"Koch, Kevin","last_name":"Koch"},{"id":"11829","full_name":"Claes, Leander","last_name":"Claes","orcid":"0000-0002-4393-268X","first_name":"Leander"},{"first_name":"Bernd","id":"213","full_name":"Henning, Bernd","last_name":"Henning"}],"oa":"1","date_updated":"2026-01-05T08:02:20Z","conference":{"name":"DAS | DAGA 2025 - 51st Annual Meeting on Acoustics","start_date":"2025-03-17","end_date":"2025-03-20","location":"Copenhagen"},"doi":"10.71568/DASDAGA2025.078","main_file_link":[{"open_access":"1"}],"title":"Estimation of piezoelectric material parameters under varying electric field conditions","citation":{"ama":"Friesen O, Meihost L, Koch K, Claes L, Henning B. Estimation of piezoelectric material parameters under varying electric field conditions. In: ; 2025. doi:<a href=\"https://doi.org/10.71568/DASDAGA2025.078\">10.71568/DASDAGA2025.078</a>","ieee":"O. Friesen, L. Meihost, K. Koch, L. Claes, and B. Henning, “Estimation of piezoelectric material parameters under varying electric field conditions,” presented at the DAS | DAGA 2025 - 51st Annual Meeting on Acoustics, Copenhagen, 2025, doi: <a href=\"https://doi.org/10.71568/DASDAGA2025.078\">10.71568/DASDAGA2025.078</a>.","chicago":"Friesen, Olga, Lars Meihost, Kevin Koch, Leander Claes, and Bernd Henning. “Estimation of Piezoelectric Material Parameters under Varying Electric Field Conditions,” 2025. <a href=\"https://doi.org/10.71568/DASDAGA2025.078\">https://doi.org/10.71568/DASDAGA2025.078</a>.","apa":"Friesen, O., Meihost, L., Koch, K., Claes, L., &#38; Henning, B. (2025). <i>Estimation of piezoelectric material parameters under varying electric field conditions</i>. DAS | DAGA 2025 - 51st Annual Meeting on Acoustics, Copenhagen. <a href=\"https://doi.org/10.71568/DASDAGA2025.078\">https://doi.org/10.71568/DASDAGA2025.078</a>","short":"O. Friesen, L. Meihost, K. Koch, L. Claes, B. Henning, in: 2025.","mla":"Friesen, Olga, et al. <i>Estimation of Piezoelectric Material Parameters under Varying Electric Field Conditions</i>. 2025, doi:<a href=\"https://doi.org/10.71568/DASDAGA2025.078\">10.71568/DASDAGA2025.078</a>.","bibtex":"@inproceedings{Friesen_Meihost_Koch_Claes_Henning_2025, title={Estimation of piezoelectric material parameters under varying electric field conditions}, DOI={<a href=\"https://doi.org/10.71568/DASDAGA2025.078\">10.71568/DASDAGA2025.078</a>}, author={Friesen, Olga and Meihost, Lars and Koch, Kevin and Claes, Leander and Henning, Bernd}, year={2025} }"},"year":"2025","department":[{"_id":"49"}],"user_id":"11829","_id":"59689","project":[{"_id":"52","name":"PC2: Computing Resources Provided by the Paderborn Center for Parallel Computing"},{"_id":"245","name":"FOR 5208: Modellbasierte Bestimmung nichtlinearer Eigenschaften von Piezokeramiken für Leistungsschallanwendungen (NEPTUN)"}],"language":[{"iso":"eng"}],"type":"conference","status":"public"},{"_id":"62174","user_id":"44393","department":[{"_id":"54"}],"language":[{"iso":"eng"}],"type":"conference","publication":" ITG Conference on Speech Communication","status":"public","date_updated":"2026-01-05T09:05:14Z","author":[{"full_name":"Meise, Adrian Tobias","id":"79268","last_name":"Meise","first_name":"Adrian Tobias"},{"last_name":"Cord-Landwehr","full_name":"Cord-Landwehr, Tobias","id":"44393","first_name":"Tobias"},{"full_name":"Haeb-Umbach, Reinhold","id":"242","last_name":"Haeb-Umbach","first_name":"Reinhold"}],"date_created":"2025-11-13T07:21:51Z","title":"On the Application of Diffusion Models for Simultaneous Denoising and Dereverberation","conference":{"location":"Berlin","name":"ITG Conference on Speech Communication"},"publication_identifier":{"isbn":["978-3-8007-6617-8"]},"year":"2025","citation":{"apa":"Meise, A. T., Cord-Landwehr, T., &#38; Haeb-Umbach, R. (2025). On the Application of Diffusion Models for Simultaneous Denoising and Dereverberation. <i> ITG Conference on Speech Communication</i>. ITG Conference on Speech Communication, Berlin.","mla":"Meise, Adrian Tobias, et al. “On the Application of Diffusion Models for Simultaneous Denoising and Dereverberation.” <i> ITG Conference on Speech Communication</i>, 2025.","bibtex":"@inproceedings{Meise_Cord-Landwehr_Haeb-Umbach_2025, title={On the Application of Diffusion Models for Simultaneous Denoising and Dereverberation}, booktitle={ ITG Conference on Speech Communication}, author={Meise, Adrian Tobias and Cord-Landwehr, Tobias and Haeb-Umbach, Reinhold}, year={2025} }","short":"A.T. Meise, T. Cord-Landwehr, R. Haeb-Umbach, in:  ITG Conference on Speech Communication, 2025.","ama":"Meise AT, Cord-Landwehr T, Haeb-Umbach R. On the Application of Diffusion Models for Simultaneous Denoising and Dereverberation. In: <i> ITG Conference on Speech Communication</i>. ; 2025.","chicago":"Meise, Adrian Tobias, Tobias Cord-Landwehr, and Reinhold Haeb-Umbach. “On the Application of Diffusion Models for Simultaneous Denoising and Dereverberation.” In <i> ITG Conference on Speech Communication</i>, 2025.","ieee":"A. T. Meise, T. Cord-Landwehr, and R. Haeb-Umbach, “On the Application of Diffusion Models for Simultaneous Denoising and Dereverberation,” presented at the ITG Conference on Speech Communication, Berlin, 2025."}},{"year":"2025","citation":{"ama":"Li G, Mennicken S, Zhu L, et al. Probing Metal Tip‐Induced Bond Weakening of a Reactive Alkyne Center Aligned via a Rigid Triphenylmethane‐Based Tripod on Au(111) by TERS and DFT. <i>Journal of Raman Spectroscopy</i>. Published online 2025. doi:<a href=\"https://doi.org/10.1002/jrs.70084\">10.1002/jrs.70084</a>","chicago":"Li, Gang, Simon Mennicken, Lu‐Yao Zhu, Sadaf Ehtesabi, Till Reichenauer, Stephan Kupfer, Daniel Schäfer, et al. “Probing Metal Tip‐Induced Bond Weakening of a Reactive Alkyne Center Aligned via a Rigid Triphenylmethane‐Based Tripod on Au(111) by TERS and DFT.” <i>Journal of Raman Spectroscopy</i>, 2025. <a href=\"https://doi.org/10.1002/jrs.70084\">https://doi.org/10.1002/jrs.70084</a>.","ieee":"G. Li <i>et al.</i>, “Probing Metal Tip‐Induced Bond Weakening of a Reactive Alkyne Center Aligned via a Rigid Triphenylmethane‐Based Tripod on Au(111) by TERS and DFT,” <i>Journal of Raman Spectroscopy</i>, Art. no. jrs. 70084, 2025, doi: <a href=\"https://doi.org/10.1002/jrs.70084\">10.1002/jrs.70084</a>.","short":"G. Li, S. Mennicken, L. Zhu, S. Ehtesabi, T. Reichenauer, S. Kupfer, D. Schäfer, S. Mehrparvar, G. Haberhauer, Y. Zhang, S. Gräfe, S. Schlücker, Z. Dong, Journal of Raman Spectroscopy (2025).","bibtex":"@article{Li_Mennicken_Zhu_Ehtesabi_Reichenauer_Kupfer_Schäfer_Mehrparvar_Haberhauer_Zhang_et al._2025, title={Probing Metal Tip‐Induced Bond Weakening of a Reactive Alkyne Center Aligned via a Rigid Triphenylmethane‐Based Tripod on Au(111) by TERS and DFT}, DOI={<a href=\"https://doi.org/10.1002/jrs.70084\">10.1002/jrs.70084</a>}, number={jrs. 70084}, journal={Journal of Raman Spectroscopy}, publisher={Wiley}, author={Li, Gang and Mennicken, Simon and Zhu, Lu‐Yao and Ehtesabi, Sadaf and Reichenauer, Till and Kupfer, Stephan and Schäfer, Daniel and Mehrparvar, Saber and Haberhauer, Gebhard and Zhang, Yao and et al.}, year={2025} }","mla":"Li, Gang, et al. “Probing Metal Tip‐Induced Bond Weakening of a Reactive Alkyne Center Aligned via a Rigid Triphenylmethane‐Based Tripod on Au(111) by TERS and DFT.” <i>Journal of Raman Spectroscopy</i>, jrs. 70084, Wiley, 2025, doi:<a href=\"https://doi.org/10.1002/jrs.70084\">10.1002/jrs.70084</a>.","apa":"Li, G., Mennicken, S., Zhu, L., Ehtesabi, S., Reichenauer, T., Kupfer, S., Schäfer, D., Mehrparvar, S., Haberhauer, G., Zhang, Y., Gräfe, S., Schlücker, S., &#38; Dong, Z. (2025). Probing Metal Tip‐Induced Bond Weakening of a Reactive Alkyne Center Aligned via a Rigid Triphenylmethane‐Based Tripod on Au(111) by TERS and DFT. <i>Journal of Raman Spectroscopy</i>, Article jrs. 70084. <a href=\"https://doi.org/10.1002/jrs.70084\">https://doi.org/10.1002/jrs.70084</a>"},"publication_identifier":{"issn":["0377-0486","1097-4555"]},"publication_status":"published","title":"Probing Metal Tip‐Induced Bond Weakening of a Reactive Alkyne Center Aligned via a Rigid Triphenylmethane‐Based Tripod on Au(111) by TERS and DFT","doi":"10.1002/jrs.70084","publisher":"Wiley","date_updated":"2026-01-05T10:22:11Z","author":[{"first_name":"Gang","last_name":"Li","full_name":"Li, Gang"},{"full_name":"Mennicken, Simon","last_name":"Mennicken","first_name":"Simon"},{"full_name":"Zhu, Lu‐Yao","last_name":"Zhu","first_name":"Lu‐Yao"},{"last_name":"Ehtesabi","full_name":"Ehtesabi, Sadaf","first_name":"Sadaf"},{"first_name":"Till","full_name":"Reichenauer, Till","last_name":"Reichenauer"},{"first_name":"Stephan","full_name":"Kupfer, Stephan","last_name":"Kupfer"},{"first_name":"Daniel","last_name":"Schäfer","full_name":"Schäfer, Daniel"},{"first_name":"Saber","last_name":"Mehrparvar","full_name":"Mehrparvar, Saber"},{"first_name":"Gebhard","last_name":"Haberhauer","full_name":"Haberhauer, Gebhard"},{"first_name":"Yao","full_name":"Zhang, Yao","last_name":"Zhang"},{"first_name":"Stefanie","full_name":"Gräfe, Stefanie","last_name":"Gräfe"},{"first_name":"Sebastian","last_name":"Schlücker","full_name":"Schlücker, Sebastian"},{"first_name":"Zhen‐Chao","last_name":"Dong","full_name":"Dong, Zhen‐Chao"}],"date_created":"2026-01-05T10:21:32Z","abstract":[{"text":"<jats:title>ABSTRACT</jats:title>\n                  <jats:p>\n                    The chemical reactivity of molecules can be controlled by a variety of effects, ranging from chemical reagents to purely physical stimuli. Metal tips employed in scanning probe microscopy are an elegant tool to manipulate reactive centers in single molecules. However, to achieve excellent control over distance and orientation, it is crucial to immobilize the reactive center and align it along the direction of the tip. Here, we aligned a reactive alkyne center via a rigid triphenylmethane‐based tripod for upright adsorption on Au(111) for inducing bond weakening in the alkyne moiety by approaching a silver tip. Single‐molecule ultrahigh vacuum low‐temperature tip‐enhanced Raman scattering was employed for probing tip‐induced bond weakening in the gap distance range from 550 to 250 pm. Both the ≡C–H stretching at ~3330 cm\n                    <jats:sup>−1</jats:sup>\n                    and the dominant –C≡C– stretching peak at ~2130 cm\n                    <jats:sup>−1</jats:sup>\n                    exhibit a shift to smaller wavenumbers due to tip‐induced bond weakening and an exponential increase in Raman intensity originating from the increased local electric field in the nanogap. To rationalize the underlying physical contributions and chemical effects of tip‐induced bond weakening, density functional theory calculations for gap distances in the range 800 to 100 pm were performed. The computational results confirmed the presence of different gap distance regimes including the onset of Pauli repulsion for short distances; for the latter, the calculations additionally predict structural distortions of the terminal alkyne induced by the nearby metal tip. These findings allow us to set a lower limit for the tip–tripod gap distance in studies requiring an intact upright configuration of the alkyne‐tripod, for example, electric field‐induced chemistry.\n                  </jats:p>","lang":"eng"}],"status":"public","publication":"Journal of Raman Spectroscopy","type":"journal_article","article_number":"jrs.70084","language":[{"iso":"eng"}],"_id":"63452","user_id":"116116"},{"publication_status":"published","publication_identifier":{"issn":["2195-4356","2195-4364"],"isbn":["9783032073914","9783032073921"]},"citation":{"ieee":"F. Bartmann, A. Riedl, and E. Moritzer, “Creep Effects of Thermoplastic Flange Systems,” in <i>Lecture Notes in Mechanical Engineering</i>, Cham: Springer Nature Switzerland, 2025.","chicago":"Bartmann, Finn, Alexander Riedl, and Elmar Moritzer. “Creep Effects of Thermoplastic Flange Systems.” In <i>Lecture Notes in Mechanical Engineering</i>. Cham: Springer Nature Switzerland, 2025. <a href=\"https://doi.org/10.1007/978-3-032-07392-1_39\">https://doi.org/10.1007/978-3-032-07392-1_39</a>.","ama":"Bartmann F, Riedl A, Moritzer E. Creep Effects of Thermoplastic Flange Systems. In: <i>Lecture Notes in Mechanical Engineering</i>. Springer Nature Switzerland; 2025. doi:<a href=\"https://doi.org/10.1007/978-3-032-07392-1_39\">10.1007/978-3-032-07392-1_39</a>","bibtex":"@inbook{Bartmann_Riedl_Moritzer_2025, place={Cham}, title={Creep Effects of Thermoplastic Flange Systems}, DOI={<a href=\"https://doi.org/10.1007/978-3-032-07392-1_39\">10.1007/978-3-032-07392-1_39</a>}, booktitle={Lecture Notes in Mechanical Engineering}, publisher={Springer Nature Switzerland}, author={Bartmann, Finn and Riedl, Alexander and Moritzer, Elmar}, year={2025} }","mla":"Bartmann, Finn, et al. “Creep Effects of Thermoplastic Flange Systems.” <i>Lecture Notes in Mechanical Engineering</i>, Springer Nature Switzerland, 2025, doi:<a href=\"https://doi.org/10.1007/978-3-032-07392-1_39\">10.1007/978-3-032-07392-1_39</a>.","short":"F. Bartmann, A. Riedl, E. Moritzer, in: Lecture Notes in Mechanical Engineering, Springer Nature Switzerland, Cham, 2025.","apa":"Bartmann, F., Riedl, A., &#38; Moritzer, E. (2025). Creep Effects of Thermoplastic Flange Systems. In <i>Lecture Notes in Mechanical Engineering</i>. Springer Nature Switzerland. <a href=\"https://doi.org/10.1007/978-3-032-07392-1_39\">https://doi.org/10.1007/978-3-032-07392-1_39</a>"},"place":"Cham","year":"2025","date_created":"2026-01-05T10:24:08Z","author":[{"last_name":"Bartmann","full_name":"Bartmann, Finn","first_name":"Finn"},{"first_name":"Alexander","last_name":"Riedl","full_name":"Riedl, Alexander"},{"last_name":"Moritzer","id":"20531","full_name":"Moritzer, Elmar","first_name":"Elmar"}],"publisher":"Springer Nature Switzerland","date_updated":"2026-01-05T12:15:14Z","doi":"10.1007/978-3-032-07392-1_39","title":"Creep Effects of Thermoplastic Flange Systems","type":"book_chapter","publication":"Lecture Notes in Mechanical Engineering","status":"public","user_id":"59363","department":[{"_id":"9"},{"_id":"321"},{"_id":"367"}],"_id":"63461","language":[{"iso":"eng"}]},{"language":[{"iso":"ger"}],"keyword":["Plasma","Plasmaaktivierung","Werkzeugstahl"],"user_id":"59363","department":[{"_id":"9"},{"_id":"321"},{"_id":"367"}],"_id":"63444","status":"public","type":"journal_article","publication":"Magazin für Oberflächentechnik","title":"Atmosphärendruckplasma: Grenzflächenmodifikation von Werkzeugstahl: Plasma trifft Stahl: Möglichkeiten zur Modifikation und Verbesserung von Oberflächeneigenschaften","date_created":"2026-01-05T08:42:56Z","author":[{"last_name":"Moritzer","full_name":"Moritzer, Elmar","id":"20531","first_name":"Elmar"},{"last_name":"Rauen","id":"62033","full_name":"Rauen, Dennis","first_name":"Dennis"},{"full_name":"Hoppe, Justin","last_name":"Hoppe","first_name":"Justin"}],"volume":2025,"date_updated":"2026-01-05T12:15:16Z","citation":{"ieee":"E. Moritzer, D. Rauen, and J. Hoppe, “Atmosphärendruckplasma: Grenzflächenmodifikation von Werkzeugstahl: Plasma trifft Stahl: Möglichkeiten zur Modifikation und Verbesserung von Oberflächeneigenschaften,” <i>Magazin für Oberflächentechnik</i>, vol. 2025, no. 10, 2025.","chicago":"Moritzer, Elmar, Dennis Rauen, and Justin Hoppe. “Atmosphärendruckplasma: Grenzflächenmodifikation von Werkzeugstahl: Plasma trifft Stahl: Möglichkeiten zur Modifikation und Verbesserung von Oberflächeneigenschaften.” <i>Magazin für Oberflächentechnik</i> 2025, no. 10 (2025).","ama":"Moritzer E, Rauen D, Hoppe J. Atmosphärendruckplasma: Grenzflächenmodifikation von Werkzeugstahl: Plasma trifft Stahl: Möglichkeiten zur Modifikation und Verbesserung von Oberflächeneigenschaften. <i>Magazin für Oberflächentechnik</i>. 2025;2025(10).","mla":"Moritzer, Elmar, et al. “Atmosphärendruckplasma: Grenzflächenmodifikation von Werkzeugstahl: Plasma trifft Stahl: Möglichkeiten zur Modifikation und Verbesserung von Oberflächeneigenschaften.” <i>Magazin für Oberflächentechnik</i>, vol. 2025, no. 10, 2025.","short":"E. Moritzer, D. Rauen, J. Hoppe, Magazin für Oberflächentechnik 2025 (2025).","bibtex":"@article{Moritzer_Rauen_Hoppe_2025, title={Atmosphärendruckplasma: Grenzflächenmodifikation von Werkzeugstahl: Plasma trifft Stahl: Möglichkeiten zur Modifikation und Verbesserung von Oberflächeneigenschaften}, volume={2025}, number={10}, journal={Magazin für Oberflächentechnik}, author={Moritzer, Elmar and Rauen, Dennis and Hoppe, Justin}, year={2025} }","apa":"Moritzer, E., Rauen, D., &#38; Hoppe, J. (2025). Atmosphärendruckplasma: Grenzflächenmodifikation von Werkzeugstahl: Plasma trifft Stahl: Möglichkeiten zur Modifikation und Verbesserung von Oberflächeneigenschaften. <i>Magazin für Oberflächentechnik</i>, <i>2025</i>(10)."},"intvolume":"      2025","year":"2025","issue":"10"},{"title":"A COMPARISON OF USING FILM INSTEAD OF POLYMER POWDER FOR POLYPROPYLENE GLASS-FIBER COMPOSITE LAMINATES","date_created":"2026-01-05T08:42:55Z","author":[{"first_name":"Elmar","last_name":"Moritzer","full_name":"Moritzer, Elmar","id":"20531"},{"last_name":"Brandes","orcid":"0009-0005-9707-0885","id":"70091","full_name":"Brandes, Philipp","first_name":"Philipp"},{"first_name":"Maurice","id":"76071","full_name":"Wittler, Maurice","last_name":"Wittler"},{"full_name":"Westphal, Max Siegfried","last_name":"Westphal","first_name":"Max Siegfried"}],"date_updated":"2026-01-05T12:15:28Z","citation":{"ieee":"E. Moritzer, P. Brandes, M. Wittler, and M. S. Westphal, “A COMPARISON OF USING FILM INSTEAD OF POLYMER POWDER FOR POLYPROPYLENE GLASS-FIBER COMPOSITE LAMINATES,” 2025.","chicago":"Moritzer, Elmar, Philipp Brandes, Maurice Wittler, and Max Siegfried Westphal. “A COMPARISON OF USING FILM INSTEAD OF POLYMER POWDER FOR POLYPROPYLENE GLASS-FIBER COMPOSITE LAMINATES.” In <i>Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2025)</i>, 2025.","ama":"Moritzer E, Brandes P, Wittler M, Westphal MS. A COMPARISON OF USING FILM INSTEAD OF POLYMER POWDER FOR POLYPROPYLENE GLASS-FIBER COMPOSITE LAMINATES. In: <i>Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2025)</i>. ; 2025.","mla":"Moritzer, Elmar, et al. “A COMPARISON OF USING FILM INSTEAD OF POLYMER POWDER FOR POLYPROPYLENE GLASS-FIBER COMPOSITE LAMINATES.” <i>Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2025)</i>, 2025.","bibtex":"@inproceedings{Moritzer_Brandes_Wittler_Westphal_2025, title={A COMPARISON OF USING FILM INSTEAD OF POLYMER POWDER FOR POLYPROPYLENE GLASS-FIBER COMPOSITE LAMINATES}, booktitle={Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2025)}, author={Moritzer, Elmar and Brandes, Philipp and Wittler, Maurice and Westphal, Max Siegfried}, year={2025} }","short":"E. Moritzer, P. Brandes, M. Wittler, M.S. Westphal, in: Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2025), 2025.","apa":"Moritzer, E., Brandes, P., Wittler, M., &#38; Westphal, M. S. (2025). A COMPARISON OF USING FILM INSTEAD OF POLYMER POWDER FOR POLYPROPYLENE GLASS-FIBER COMPOSITE LAMINATES. <i>Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2025)</i>."},"year":"2025","language":[{"iso":"eng"}],"keyword":["Faser-Kunststoff-Verbunde (FKV)","Faserverstärkte Kunststoffe (FVK)","Organobleche"],"department":[{"_id":"9"},{"_id":"321"},{"_id":"367"}],"user_id":"59363","_id":"63442","status":"public","publication":"Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2025)","type":"conference"},{"title":"Untersuchung des Erwärmverhaltens von Organoblechen mittels IR-Strahlung für das Fügen im Stempelnietverfahren","date_updated":"2026-01-05T12:15:07Z","author":[{"full_name":"Moritzer, Elmar","id":"20531","last_name":"Moritzer","first_name":"Elmar"},{"last_name":"Völklein","full_name":"Völklein, Paul Leonhard","id":"40735","first_name":"Paul Leonhard"}],"date_created":"2026-01-05T10:21:46Z","year":"2025","citation":{"ieee":"E. Moritzer and P. L. Völklein, “Untersuchung des Erwärmverhaltens von Organoblechen mittels IR-Strahlung für das Fügen im Stempelnietverfahren,” 2025.","chicago":"Moritzer, Elmar, and Paul Leonhard Völklein. “Untersuchung des Erwärmverhaltens von Organoblechen mittels IR-Strahlung für das Fügen im Stempelnietverfahren.” In <i>Technomer 2025 29. Fachtagung</i>, 2025.","ama":"Moritzer E, Völklein PL. Untersuchung des Erwärmverhaltens von Organoblechen mittels IR-Strahlung für das Fügen im Stempelnietverfahren. In: <i>Technomer 2025 29. Fachtagung</i>. ; 2025.","apa":"Moritzer, E., &#38; Völklein, P. L. (2025). Untersuchung des Erwärmverhaltens von Organoblechen mittels IR-Strahlung für das Fügen im Stempelnietverfahren. <i>Technomer 2025 29. Fachtagung</i>.","bibtex":"@inproceedings{Moritzer_Völklein_2025, title={Untersuchung des Erwärmverhaltens von Organoblechen mittels IR-Strahlung für das Fügen im Stempelnietverfahren}, booktitle={Technomer 2025 29. Fachtagung}, author={Moritzer, Elmar and Völklein, Paul Leonhard}, year={2025} }","mla":"Moritzer, Elmar, and Paul Leonhard Völklein. “Untersuchung des Erwärmverhaltens von Organoblechen mittels IR-Strahlung für das Fügen im Stempelnietverfahren.” <i>Technomer 2025 29. Fachtagung</i>, 2025.","short":"E. Moritzer, P.L. Völklein, in: Technomer 2025 29. Fachtagung, 2025."},"publication_identifier":{"isbn":["978-3-939382-17-1"]},"keyword":["Faserverstärkte Kunststoffe (FVK)","mechanischens Fügen","Nieten","Organobleche"],"language":[{"iso":"ger"}],"_id":"63457","department":[{"_id":"9"},{"_id":"321"},{"_id":"367"}],"user_id":"59363","status":"public","publication":"Technomer 2025 29. Fachtagung","type":"conference"}]