[{"keyword":["Industrial and Manufacturing Engineering","Mechanical Engineering","Mechanics of Materials"],"language":[{"iso":"eng"}],"publication":"Journal of Manufacturing and Materials Processing","abstract":[{"text":"Deformation of continuous fibre reinforced plastics during thermally-assisted forming or joining processes leads to a change of the initial material structure. The load behaviour of composite parts strongly depends on the resultant material structure. The prediction of this material structure is a challenging task and requires a deep knowledge of the material behaviour above melting temperature and the occurring complex forming phenomena. Through this knowledge, the optimisation of manufacturing parameters for a more efficient and reproducible process can be enabled and are in the focus of many investigations. In the present paper, a simplified pultrusion test rig is developed and presented to investigate the deformation behaviour of a thermoplastic semi-finished fiber product in a forming element. Therefore, different process parameters, like forming element temperature, pulling velocity as well as the forming element geometry, are varied. The deformation behaviour in the forming zone of the thermoplastic preimpregnated continuous glass fibre-reinforced material is investigated by computed tomography and the resultant pulling forces are measured. The results clearly show the correlation between the forming element temperature and the resulting forces due to a change in the viscosity of the thermoplastic matrix and the resulting fiber matrix interaction. In addition, the evaluation of the measurement data shows which forming forces are required to change the shape of the thermoplastic unidirectional material with a rectangular cross-section to a round one.","lang":"eng"}],"publisher":"MDPI AG","date_created":"2022-12-06T20:38:11Z","title":"Characterisation of Fibre Bundle Deformation Behaviour—Test Rig, Results and Conclusions","issue":"6","year":"2022","_id":"34255","project":[{"_id":"130","name":"TRR 285: TRR 285","grant_number":"418701707"},{"_id":"131","name":"TRR 285 - A: TRR 285 - Project Area A"},{"name":"TRR 285 – A03: TRR 285 - Subproject A03","_id":"137"}],"department":[{"_id":"630"}],"user_id":"14931","article_number":"146","type":"journal_article","status":"public","date_updated":"2023-01-02T11:05:02Z","oa":"1","volume":6,"author":[{"first_name":"Andreas","full_name":"Borowski, Andreas","last_name":"Borowski"},{"last_name":"Gröger","full_name":"Gröger, Benjamin","first_name":"Benjamin"},{"first_name":"René","last_name":"Füßel","full_name":"Füßel, René"},{"first_name":"Maik","full_name":"Gude, Maik","last_name":"Gude"}],"doi":"10.3390/jmmp6060146","main_file_link":[{"open_access":"1","url":"https://www.mdpi.com/2504-4494/6/6/146"}],"publication_identifier":{"issn":["2504-4494"]},"publication_status":"published","intvolume":" 6","citation":{"apa":"Borowski, A., Gröger, B., Füßel, R., & Gude, M. (2022). Characterisation of Fibre Bundle Deformation Behaviour—Test Rig, Results and Conclusions. Journal of Manufacturing and Materials Processing, 6(6), Article 146. https://doi.org/10.3390/jmmp6060146","short":"A. Borowski, B. Gröger, R. Füßel, M. Gude, Journal of Manufacturing and Materials Processing 6 (2022).","mla":"Borowski, Andreas, et al. “Characterisation of Fibre Bundle Deformation Behaviour—Test Rig, Results and Conclusions.” Journal of Manufacturing and Materials Processing, vol. 6, no. 6, 146, MDPI AG, 2022, doi:10.3390/jmmp6060146.","bibtex":"@article{Borowski_Gröger_Füßel_Gude_2022, title={Characterisation of Fibre Bundle Deformation Behaviour—Test Rig, Results and Conclusions}, volume={6}, DOI={10.3390/jmmp6060146}, number={6146}, journal={Journal of Manufacturing and Materials Processing}, publisher={MDPI AG}, author={Borowski, Andreas and Gröger, Benjamin and Füßel, René and Gude, Maik}, year={2022} }","ieee":"A. Borowski, B. Gröger, R. Füßel, and M. Gude, “Characterisation of Fibre Bundle Deformation Behaviour—Test Rig, Results and Conclusions,” Journal of Manufacturing and Materials Processing, vol. 6, no. 6, Art. no. 146, 2022, doi: 10.3390/jmmp6060146.","chicago":"Borowski, Andreas, Benjamin Gröger, René Füßel, and Maik Gude. “Characterisation of Fibre Bundle Deformation Behaviour—Test Rig, Results and Conclusions.” Journal of Manufacturing and Materials Processing 6, no. 6 (2022). https://doi.org/10.3390/jmmp6060146.","ama":"Borowski A, Gröger B, Füßel R, Gude M. Characterisation of Fibre Bundle Deformation Behaviour—Test Rig, Results and Conclusions. Journal of Manufacturing and Materials Processing. 2022;6(6). doi:10.3390/jmmp6060146"}},{"article_number":"127","department":[{"_id":"630"}],"user_id":"14931","_id":"34248","project":[{"name":"TRR 285: TRR 285","_id":"130","grant_number":"418701707"},{"name":"TRR 285 - C: TRR 285 - Project Area C","_id":"133"},{"name":"TRR 285 – C01: TRR 285 - Subproject C01","_id":"145"},{"_id":"146","name":"TRR 285 – C02: TRR 285 - Subproject C02"}],"status":"public","type":"journal_article","doi":"10.3390/jmmp6060127","main_file_link":[{"open_access":"1"}],"volume":6,"author":[{"last_name":"Römisch","full_name":"Römisch, David","first_name":"David"},{"full_name":"Hetzel, Andreas","last_name":"Hetzel","first_name":"Andreas"},{"first_name":"Simon","last_name":"Wituschek","full_name":"Wituschek, Simon"},{"first_name":"Michael","full_name":"Lechner, Michael","last_name":"Lechner"},{"first_name":"Marion","full_name":"Merklein, Marion","last_name":"Merklein"}],"date_updated":"2023-01-02T11:01:34Z","oa":"1","intvolume":" 6","citation":{"ama":"Römisch D, Hetzel A, Wituschek S, Lechner M, Merklein M. Pin Extrusion for Mechanical Joining from Orbital Formed Tailored Blanks with Local Material Pre-Distribution. Journal of Manufacturing and Materials Processing. 2022;6(6). doi:10.3390/jmmp6060127","chicago":"Römisch, David, Andreas Hetzel, Simon Wituschek, Michael Lechner, and Marion Merklein. “Pin Extrusion for Mechanical Joining from Orbital Formed Tailored Blanks with Local Material Pre-Distribution.” Journal of Manufacturing and Materials Processing 6, no. 6 (2022). https://doi.org/10.3390/jmmp6060127.","ieee":"D. Römisch, A. Hetzel, S. Wituschek, M. Lechner, and M. Merklein, “Pin Extrusion for Mechanical Joining from Orbital Formed Tailored Blanks with Local Material Pre-Distribution,” Journal of Manufacturing and Materials Processing, vol. 6, no. 6, Art. no. 127, 2022, doi: 10.3390/jmmp6060127.","apa":"Römisch, D., Hetzel, A., Wituschek, S., Lechner, M., & Merklein, M. (2022). Pin Extrusion for Mechanical Joining from Orbital Formed Tailored Blanks with Local Material Pre-Distribution. Journal of Manufacturing and Materials Processing, 6(6), Article 127. https://doi.org/10.3390/jmmp6060127","mla":"Römisch, David, et al. “Pin Extrusion for Mechanical Joining from Orbital Formed Tailored Blanks with Local Material Pre-Distribution.” Journal of Manufacturing and Materials Processing, vol. 6, no. 6, 127, MDPI AG, 2022, doi:10.3390/jmmp6060127.","bibtex":"@article{Römisch_Hetzel_Wituschek_Lechner_Merklein_2022, title={Pin Extrusion for Mechanical Joining from Orbital Formed Tailored Blanks with Local Material Pre-Distribution}, volume={6}, DOI={10.3390/jmmp6060127}, number={6127}, journal={Journal of Manufacturing and Materials Processing}, publisher={MDPI AG}, author={Römisch, David and Hetzel, Andreas and Wituschek, Simon and Lechner, Michael and Merklein, Marion}, year={2022} }","short":"D. Römisch, A. Hetzel, S. Wituschek, M. Lechner, M. Merklein, Journal of Manufacturing and Materials Processing 6 (2022)."},"publication_identifier":{"issn":["2504-4494"]},"publication_status":"published","language":[{"iso":"eng"}],"keyword":["Industrial and Manufacturing Engineering","Mechanical Engineering","Mechanics of Materials"],"abstract":[{"text":"Pin extrusion is a common process to realise pin structures in different geometrical dimensions for a subsequent joining operation. Nevertheless, the process of pin extrusion offers process limits regarding sheet thinning as a consequence of the punch penetration depth into the sheet. Thereby, cracks at the residual sheet thickness can occur during strength tests, resulting in a failure of the complete joint due to severe thinning. Therefore, measures have to be taken into account to reduce the thinning. One possibility is the application of orbital formed tailored blanks with a local material pre-distribution, which allows a higher sheet thickness in the desired area. Within this contribution, the novel approach of a process combination of orbital forming and pin extrusion is investigated. To reveal the potential of a local material pre-distribution, conventional specimens are compared with previously orbital formed components. Relevant parameters such as the residual sheet thickness, the pin height as well as the average hardness values are compared. The results show a significant positive influence of a local material pre-distribution on the residual sheet thickness as well as the resulting pin height. Furthermore, the strain hardening during orbital forming can be seen as an additional advantage. To conclude the results, the process limits of conventional pin extrusion can be expanded significantly by the application of specimens with a local material pre-distribution.","lang":"eng"}],"publication":"Journal of Manufacturing and Materials Processing","title":"Pin Extrusion for Mechanical Joining from Orbital Formed Tailored Blanks with Local Material Pre-Distribution","date_created":"2022-12-06T18:56:24Z","publisher":"MDPI AG","year":"2022","issue":"6"},{"type":"journal_article","status":"public","department":[{"_id":"630"}],"user_id":"14931","_id":"34247","project":[{"name":"TRR 285: TRR 285","_id":"130","grant_number":"418701707"},{"_id":"131","name":"TRR 285 - A: TRR 285 - Project Area A"},{"_id":"137","name":"TRR 285 – A03: TRR 285 - Subproject A03"},{"_id":"133","name":"TRR 285 - C: TRR 285 - Project Area C"},{"_id":"145","name":"TRR 285 – C01: TRR 285 - Subproject C01"}],"article_number":"5039","publication_identifier":{"issn":["2073-4360"]},"publication_status":"published","intvolume":" 14","citation":{"chicago":"Gröger, Benjamin, David Römisch, Martin Kraus, Juliane Troschitz, René Füßel, Marion Merklein, and Maik Gude. “Warmforming Flow Pressing Characteristics of Continuous Fibre Reinforced Thermoplastic Composites.” Polymers 14, no. 22 (2022). https://doi.org/10.3390/polym14225039.","ieee":"B. Gröger et al., “Warmforming Flow Pressing Characteristics of Continuous Fibre Reinforced Thermoplastic Composites,” Polymers, vol. 14, no. 22, Art. no. 5039, 2022, doi: 10.3390/polym14225039.","ama":"Gröger B, Römisch D, Kraus M, et al. Warmforming Flow Pressing Characteristics of Continuous Fibre Reinforced Thermoplastic Composites. Polymers. 2022;14(22). doi:10.3390/polym14225039","short":"B. Gröger, D. Römisch, M. Kraus, J. Troschitz, R. Füßel, M. Merklein, M. Gude, Polymers 14 (2022).","mla":"Gröger, Benjamin, et al. “Warmforming Flow Pressing Characteristics of Continuous Fibre Reinforced Thermoplastic Composites.” Polymers, vol. 14, no. 22, 5039, MDPI AG, 2022, doi:10.3390/polym14225039.","bibtex":"@article{Gröger_Römisch_Kraus_Troschitz_Füßel_Merklein_Gude_2022, title={Warmforming Flow Pressing Characteristics of Continuous Fibre Reinforced Thermoplastic Composites}, volume={14}, DOI={10.3390/polym14225039}, number={225039}, journal={Polymers}, publisher={MDPI AG}, author={Gröger, Benjamin and Römisch, David and Kraus, Martin and Troschitz, Juliane and Füßel, René and Merklein, Marion and Gude, Maik}, year={2022} }","apa":"Gröger, B., Römisch, D., Kraus, M., Troschitz, J., Füßel, R., Merklein, M., & Gude, M. (2022). Warmforming Flow Pressing Characteristics of Continuous Fibre Reinforced Thermoplastic Composites. Polymers, 14(22), Article 5039. https://doi.org/10.3390/polym14225039"},"volume":14,"author":[{"first_name":"Benjamin","full_name":"Gröger, Benjamin","last_name":"Gröger"},{"first_name":"David","full_name":"Römisch, David","last_name":"Römisch"},{"full_name":"Kraus, Martin","last_name":"Kraus","first_name":"Martin"},{"last_name":"Troschitz","full_name":"Troschitz, Juliane","first_name":"Juliane"},{"full_name":"Füßel, René","last_name":"Füßel","first_name":"René"},{"first_name":"Marion","full_name":"Merklein, Marion","last_name":"Merklein"},{"full_name":"Gude, Maik","last_name":"Gude","first_name":"Maik"}],"date_updated":"2023-01-02T11:02:56Z","oa":"1","doi":"10.3390/polym14225039","main_file_link":[{"open_access":"1"}],"publication":"Polymers","abstract":[{"text":"The paper presents research regarding a thermally supported multi-material clinching process (hotclinching) for metal and thermoplastic composite (TPC) sheets: an experimental approach to investigate the flow pressing phenomena during joining. Therefore, an experimental setup is developed to compress the TPC-specimens in out-of-plane direction with different initial TPC thicknesses and varying temperature levels. The deformed specimens are analyzed with computed tomography to investigate the resultant inner material structure at different compaction levels. The results are compared in terms of force-compaction-curves and occurring phenomena during compaction. The change of the material structure is characterized by sliding phenomena and crack initiation and growth.","lang":"eng"}],"language":[{"iso":"eng"}],"keyword":["Polymers and Plastics","General Chemistry"],"issue":"22","year":"2022","date_created":"2022-12-06T18:51:19Z","publisher":"MDPI AG","title":"Warmforming Flow Pressing Characteristics of Continuous Fibre Reinforced Thermoplastic Composites"},{"abstract":[{"text":"The 3D shear deformation and failure behaviour of a glass fibre reinforced polypropylene in a shear strain rate range of γ˙=2.2×10−4 to 3.4 1s is investigated. An Iosipescu testing setup on a servo-hydraulic high speed testing unit is used to experimentally characterise the in-plane and out-of-plane behaviour utilising three specimen configurations (12-, 13- and 31-direction). The experimental procedure as well as the testing results are presented and discussed. The measured shear stress–shear strain relations indicate a highly nonlinear behaviour and a distinct rate dependency. Two methods are investigated to derive according material characteristics: a classical engineering approach based on moduli and strengths and a data driven approach based on the curve progression. In all cases a Johnson–Cook based formulation is used to describe rate dependency. The analysis methodologies as well as the derived model parameters are described and discussed in detail. It is shown that a phenomenologically enhanced regression can be used to obtain material characteristics for a generalising constitutive model based on the data driven approach.","lang":"eng"}],"publication":"Journal of Composites Science","keyword":["Engineering (miscellaneous)","Ceramics and Composites"],"language":[{"iso":"eng"}],"year":"2022","issue":"10","title":"A Data Driven Modelling Approach for the Strain Rate Dependent 3D Shear Deformation and Failure of Thermoplastic Fibre Reinforced Composites: Experimental Characterisation and Deriving Modelling Parameters","publisher":"MDPI AG","date_created":"2022-12-06T20:42:38Z","status":"public","type":"journal_article","article_number":"318","project":[{"grant_number":"418701707","_id":"130","name":"TRR 285: TRR 285"},{"name":"TRR 285 - A: TRR 285 - Project Area A","_id":"131"},{"name":"TRR 285 – A03: TRR 285 - Subproject A03","_id":"137"}],"_id":"34256","user_id":"14931","department":[{"_id":"630"}],"citation":{"chicago":"Gerritzen, Johannes, Andreas Hornig, Benjamin Gröger, and Maik Gude. “A Data Driven Modelling Approach for the Strain Rate Dependent 3D Shear Deformation and Failure of Thermoplastic Fibre Reinforced Composites: Experimental Characterisation and Deriving Modelling Parameters.” Journal of Composites Science 6, no. 10 (2022). https://doi.org/10.3390/jcs6100318.","ieee":"J. Gerritzen, A. Hornig, B. Gröger, and M. Gude, “A Data Driven Modelling Approach for the Strain Rate Dependent 3D Shear Deformation and Failure of Thermoplastic Fibre Reinforced Composites: Experimental Characterisation and Deriving Modelling Parameters,” Journal of Composites Science, vol. 6, no. 10, Art. no. 318, 2022, doi: 10.3390/jcs6100318.","ama":"Gerritzen J, Hornig A, Gröger B, Gude M. A Data Driven Modelling Approach for the Strain Rate Dependent 3D Shear Deformation and Failure of Thermoplastic Fibre Reinforced Composites: Experimental Characterisation and Deriving Modelling Parameters. Journal of Composites Science. 2022;6(10). doi:10.3390/jcs6100318","apa":"Gerritzen, J., Hornig, A., Gröger, B., & Gude, M. (2022). A Data Driven Modelling Approach for the Strain Rate Dependent 3D Shear Deformation and Failure of Thermoplastic Fibre Reinforced Composites: Experimental Characterisation and Deriving Modelling Parameters. Journal of Composites Science, 6(10), Article 318. https://doi.org/10.3390/jcs6100318","short":"J. Gerritzen, A. Hornig, B. Gröger, M. Gude, Journal of Composites Science 6 (2022).","mla":"Gerritzen, Johannes, et al. “A Data Driven Modelling Approach for the Strain Rate Dependent 3D Shear Deformation and Failure of Thermoplastic Fibre Reinforced Composites: Experimental Characterisation and Deriving Modelling Parameters.” Journal of Composites Science, vol. 6, no. 10, 318, MDPI AG, 2022, doi:10.3390/jcs6100318.","bibtex":"@article{Gerritzen_Hornig_Gröger_Gude_2022, title={A Data Driven Modelling Approach for the Strain Rate Dependent 3D Shear Deformation and Failure of Thermoplastic Fibre Reinforced Composites: Experimental Characterisation and Deriving Modelling Parameters}, volume={6}, DOI={10.3390/jcs6100318}, number={10318}, journal={Journal of Composites Science}, publisher={MDPI AG}, author={Gerritzen, Johannes and Hornig, Andreas and Gröger, Benjamin and Gude, Maik}, year={2022} }"},"intvolume":" 6","publication_status":"published","publication_identifier":{"issn":["2504-477X"]},"main_file_link":[{"url":"https://www.mdpi.com/2504-477X/6/10/318","open_access":"1"}],"doi":"10.3390/jcs6100318","date_updated":"2023-01-02T11:06:15Z","oa":"1","author":[{"full_name":"Gerritzen, Johannes","last_name":"Gerritzen","first_name":"Johannes"},{"last_name":"Hornig","full_name":"Hornig, Andreas","first_name":"Andreas"},{"first_name":"Benjamin","last_name":"Gröger","full_name":"Gröger, Benjamin"},{"first_name":"Maik","last_name":"Gude","full_name":"Gude, Maik"}],"volume":6},{"citation":{"mla":"Schaude, Janik, and Tino Hausotte. “Atomic Force Microscope with an Adjustable Probe Direction and Integrated Sensing and Actuation.” Nanomanufacturing and Metrology, vol. 5, no. 2, Springer Science and Business Media LLC, 2022, pp. 139–48, doi:10.1007/s41871-022-00143-9.","short":"J. Schaude, T. Hausotte, Nanomanufacturing and Metrology 5 (2022) 139–148.","bibtex":"@article{Schaude_Hausotte_2022, title={Atomic Force Microscope with an Adjustable Probe Direction and Integrated Sensing and Actuation}, volume={5}, DOI={10.1007/s41871-022-00143-9}, number={2}, journal={Nanomanufacturing and Metrology}, publisher={Springer Science and Business Media LLC}, author={Schaude, Janik and Hausotte, Tino}, year={2022}, pages={139–148} }","apa":"Schaude, J., & Hausotte, T. (2022). Atomic Force Microscope with an Adjustable Probe Direction and Integrated Sensing and Actuation. Nanomanufacturing and Metrology, 5(2), 139–148. https://doi.org/10.1007/s41871-022-00143-9","ieee":"J. Schaude and T. Hausotte, “Atomic Force Microscope with an Adjustable Probe Direction and Integrated Sensing and Actuation,” Nanomanufacturing and Metrology, vol. 5, no. 2, pp. 139–148, 2022, doi: 10.1007/s41871-022-00143-9.","chicago":"Schaude, Janik, and Tino Hausotte. “Atomic Force Microscope with an Adjustable Probe Direction and Integrated Sensing and Actuation.” Nanomanufacturing and Metrology 5, no. 2 (2022): 139–48. https://doi.org/10.1007/s41871-022-00143-9.","ama":"Schaude J, Hausotte T. Atomic Force Microscope with an Adjustable Probe Direction and Integrated Sensing and Actuation. Nanomanufacturing and Metrology. 2022;5(2):139-148. doi:10.1007/s41871-022-00143-9"},"page":"139-148","intvolume":" 5","publication_status":"published","publication_identifier":{"issn":["2520-811X","2520-8128"]},"doi":"10.1007/s41871-022-00143-9","date_updated":"2023-01-02T11:10:08Z","author":[{"last_name":"Schaude","full_name":"Schaude, Janik","first_name":"Janik"},{"last_name":"Hausotte","full_name":"Hausotte, Tino","first_name":"Tino"}],"volume":5,"status":"public","type":"journal_article","project":[{"grant_number":"418701707","_id":"130","name":"TRR 285: TRR 285"},{"_id":"133","name":"TRR 285 - C: TRR 285 - Project Area C"},{"name":"TRR 285 – C05: TRR 285 - Subproject C05","_id":"149"}],"_id":"34214","user_id":"14931","department":[{"_id":"630"}],"year":"2022","issue":"2","title":"Atomic Force Microscope with an Adjustable Probe Direction and Integrated Sensing and Actuation","publisher":"Springer Science and Business Media LLC","date_created":"2022-12-05T21:15:09Z","abstract":[{"lang":"eng","text":"This article presents the application and evaluation of a cantilever with integrated sensing and actuation as part of an atomic force microscope (AFM) with an adjustable probe direction, which is integrated into a nano measuring machine (NMM-1). The AFM, which is operated in closed-loop intermittent contact mode, is based on two rotational axes that enable the adjustment of the probe direction to cover a complete hemisphere. The axes greatly enlarge the metrology frame of the measuring system by materials with a comparatively high coefficient of thermal expansion, which ultimately limits the achievable measurement uncertainty of the measuring system. Thus, to reduce the thermal sensitivity of the system, the redesign of the rotational kinematics is mandatory. However, in this article, some preliminary investigations on the application of a self-sensing cantilever with an integrated micro heater for its stimulation will be presented. In previous investigations, a piezoelectric actuator has been applied to stimulate the cantilever. However, the removal of the piezoelectric actuator, which is enabled by the application of a cantilever with an integrated micro heater, promises an essential simplification of the sensor holder. Thus, in the future it might be possible to use materials with a low coefficient of thermal expansion, which are often difficult to machine and therefore only allow for rather simple geometries. Furthermore, because of the creepage of piezoelectric actuators, their removal from the metrology frame might lead to improved metrological characteristics. As will be shown, there are no significant differences between the two modes of actuation. Therefore, the redesigned rotational system will be based on the cantilever with integrated sensing and actuation."}],"publication":"Nanomanufacturing and Metrology","keyword":["Industrial and Manufacturing Engineering","Mechanical Engineering","Materials Science (miscellaneous)"],"language":[{"iso":"eng"}]},{"status":"public","abstract":[{"text":"Predicting the durability of components subjected to mechanical load under environmental conditions leading to corrosion is one of the most challenging tasks in mechanical engineering. The demand for precise predictions increases with the desire of lightweight design in transportation due to environmental protection. Corrosion with its manifold of mechanisms often occurs together with the production of hydrogen by electrochemical reactions. Hydrogen embrittlement is one of the most feared damage mechanisms for metal constructions often leading to early and unexpected failure. Until now, predictions are mostly based on costly experiments. Hence, a rational predictive model based on the fundamentals of electrochemistry and damage mechanics has to be developed in order to reduce the costs. In this work, a first model approach based on classical continuum damage mechanics is presented to couple both, the damage induced by the mechanical stress and the hydrogen embrittlement. An elaborated two-scale model based on the selfconsistent theory is applied to describe the mechanical damage due to fatigue. The electrochemical kinetics are elucidated through the Langmuir adsorption isotherm and the diffusion equation to consider the impact of hydrogen embrittlement on the fatigue. The modeling of the mechanism of hydrogen embrittlement defines the progress of damage accumulation due to the electrochemistry. The durability results like the S-N diagram show the influence of hydrogen embrittlement by varying, e.g. the fatigue frequency or the stress ratio.","lang":"eng"}],"type":"book_chapter","publication":"Material Modeling and Structural Mechanics","language":[{"iso":"eng"}],"keyword":["Hydrogen embrittlement","Fatigue","Continuum damage mechanics","Numerical simulation","Multi-field problem"],"user_id":"14931","department":[{"_id":"630"}],"project":[{"name":"TRR 285: TRR 285","_id":"130","grant_number":"418701707"},{"_id":"132","name":"TRR 285 - B: TRR 285 - Project Area B"},{"name":"TRR 285 – B03: TRR 285 - Subproject B03","_id":"142"}],"_id":"34209","citation":{"ama":"Shi Y, Harzheim S, Hofmann M, Wallmersperger T. A Damage Model for Corrosion Fatigue Due to Hydrogen Embrittlement. In: Material Modeling and Structural Mechanics. Springer International Publishing; 2022. doi:10.1007/978-3-030-97675-0_9","ieee":"Y. Shi, S. Harzheim, M. Hofmann, and T. Wallmersperger, “A Damage Model for Corrosion Fatigue Due to Hydrogen Embrittlement,” in Material Modeling and Structural Mechanics, Cham: Springer International Publishing, 2022.","chicago":"Shi, Yuhao, Sven Harzheim, Martin Hofmann, and Thomas Wallmersperger. “A Damage Model for Corrosion Fatigue Due to Hydrogen Embrittlement.” In Material Modeling and Structural Mechanics. Cham: Springer International Publishing, 2022. https://doi.org/10.1007/978-3-030-97675-0_9.","short":"Y. Shi, S. Harzheim, M. Hofmann, T. Wallmersperger, in: Material Modeling and Structural Mechanics, Springer International Publishing, Cham, 2022.","bibtex":"@inbook{Shi_Harzheim_Hofmann_Wallmersperger_2022, place={Cham}, title={A Damage Model for Corrosion Fatigue Due to Hydrogen Embrittlement}, DOI={10.1007/978-3-030-97675-0_9}, booktitle={Material Modeling and Structural Mechanics}, publisher={Springer International Publishing}, author={Shi, Yuhao and Harzheim, Sven and Hofmann, Martin and Wallmersperger, Thomas}, year={2022} }","mla":"Shi, Yuhao, et al. “A Damage Model for Corrosion Fatigue Due to Hydrogen Embrittlement.” Material Modeling and Structural Mechanics, Springer International Publishing, 2022, doi:10.1007/978-3-030-97675-0_9.","apa":"Shi, Y., Harzheim, S., Hofmann, M., & Wallmersperger, T. (2022). A Damage Model for Corrosion Fatigue Due to Hydrogen Embrittlement. In Material Modeling and Structural Mechanics. Springer International Publishing. https://doi.org/10.1007/978-3-030-97675-0_9"},"year":"2022","place":"Cham","publication_status":"published","publication_identifier":{"isbn":["9783030976743","9783030976750"],"issn":["1869-8433","1869-8441"]},"doi":"10.1007/978-3-030-97675-0_9","title":"A Damage Model for Corrosion Fatigue Due to Hydrogen Embrittlement","author":[{"first_name":"Yuhao","full_name":"Shi, Yuhao","last_name":"Shi"},{"full_name":"Harzheim, Sven","last_name":"Harzheim","first_name":"Sven"},{"first_name":"Martin","last_name":"Hofmann","full_name":"Hofmann, Martin"},{"first_name":"Thomas","full_name":"Wallmersperger, Thomas","last_name":"Wallmersperger"}],"date_created":"2022-12-05T20:53:13Z","publisher":"Springer International Publishing","date_updated":"2023-01-02T11:10:26Z"},{"type":"journal_article","status":"public","project":[{"grant_number":"418701707","_id":"130","name":"TRR 285: TRR 285"},{"name":"TRR 285 - A: TRR 285 - Project Area A","_id":"131"},{"name":"TRR 285 – A04: TRR 285 - Subproject A04","_id":"138"}],"_id":"34251","user_id":"14931","department":[{"_id":"630"}],"article_number":"1651","publication_status":"published","publication_identifier":{"issn":["2075-4701"]},"citation":{"ieee":"J. Kalich, M. Matzke, W. Pfeiffer, S. Schlegel, L. Kornhuber, and U. Füssel, “Long-Term Behavior of Clinched Electrical Contacts,” Metals, vol. 12, no. 10, Art. no. 1651, 2022, doi: 10.3390/met12101651.","chicago":"Kalich, Jan, Marcus Matzke, Wolfgang Pfeiffer, Stephan Schlegel, Ludwig Kornhuber, and Uwe Füssel. “Long-Term Behavior of Clinched Electrical Contacts.” Metals 12, no. 10 (2022). https://doi.org/10.3390/met12101651.","ama":"Kalich J, Matzke M, Pfeiffer W, Schlegel S, Kornhuber L, Füssel U. Long-Term Behavior of Clinched Electrical Contacts. Metals. 2022;12(10). doi:10.3390/met12101651","apa":"Kalich, J., Matzke, M., Pfeiffer, W., Schlegel, S., Kornhuber, L., & Füssel, U. (2022). Long-Term Behavior of Clinched Electrical Contacts. Metals, 12(10), Article 1651. https://doi.org/10.3390/met12101651","short":"J. Kalich, M. Matzke, W. Pfeiffer, S. Schlegel, L. Kornhuber, U. Füssel, Metals 12 (2022).","mla":"Kalich, Jan, et al. “Long-Term Behavior of Clinched Electrical Contacts.” Metals, vol. 12, no. 10, 1651, MDPI AG, 2022, doi:10.3390/met12101651.","bibtex":"@article{Kalich_Matzke_Pfeiffer_Schlegel_Kornhuber_Füssel_2022, title={Long-Term Behavior of Clinched Electrical Contacts}, volume={12}, DOI={10.3390/met12101651}, number={101651}, journal={Metals}, publisher={MDPI AG}, author={Kalich, Jan and Matzke, Marcus and Pfeiffer, Wolfgang and Schlegel, Stephan and Kornhuber, Ludwig and Füssel, Uwe}, year={2022} }"},"intvolume":" 12","oa":"1","date_updated":"2023-01-02T11:06:35Z","author":[{"first_name":"Jan","full_name":"Kalich, Jan","last_name":"Kalich"},{"first_name":"Marcus","full_name":"Matzke, Marcus","last_name":"Matzke"},{"last_name":"Pfeiffer","full_name":"Pfeiffer, Wolfgang","first_name":"Wolfgang"},{"first_name":"Stephan","last_name":"Schlegel","full_name":"Schlegel, Stephan"},{"last_name":"Kornhuber","full_name":"Kornhuber, Ludwig","first_name":"Ludwig"},{"last_name":"Füssel","full_name":"Füssel, Uwe","first_name":"Uwe"}],"volume":12,"main_file_link":[{"open_access":"1","url":"https://www.mdpi.com/2075-4701/12/10/1651"}],"doi":"10.3390/met12101651","publication":"Metals","abstract":[{"lang":"eng","text":"Joining by forming operations presents powerful and complex joining techniques. Clinching is a well-known joining process for use in sheet metalworking. Currently, clinched joints are focusing on mechanically enhanced connections. Additionally, the demand for integrating electrical requirements to transmit electrical currents will be increased in the future. This integration is particularly important, for instance, in the e-mobility sector. It enables connecting battery cells with electrical joints of aluminum and copper. Systematic use of the process-specific advantages of this joining method opens up the possibility to find and create electrically optimized connections. The optimization for the transmission of electrical currents will be demonstrated for clinched joints by adapting the tool geometry and the clinched joint design. Based on a comparison of the electrical joint resistance, the limit use temperature is defined for the joining materials used based on the microstructural condition and the aging condition due to artificial aging. As a result of the investigations carried out, reliable current transmission at a constant conductor temperature of up to 120 °C can be achieved for clinched copper–copper joints. In the case of pure aluminum joints and mixed joints of aluminum and copper, long-term stable current transmission can be ensured up to a conductor temperature of 100 °C."}],"keyword":["General Materials Science","Metals and Alloys"],"language":[{"iso":"eng"}],"issue":"10","year":"2022","publisher":"MDPI AG","date_created":"2022-12-06T19:20:46Z","title":"Long-Term Behavior of Clinched Electrical Contacts"},{"keyword":["General Materials Science"],"language":[{"iso":"eng"}],"abstract":[{"text":"A virtual test setup for investigating single fibres in a transverse shear flow based on a parallel-plate rheometer is presented. The investigations are carried out to verify a numerical representation of the fluid–structure interaction (FSI), where Arbitrary Lagrangian–Eulerian (ALE) and computational fluid dynamics (CFD) methods are used and evaluated. Both are suitable to simulate flexible solid structures in a transverse shear flow. Comparative investigations with different model setups and increasing complexity are presented. It is shown, that the CFD method with an interface-based coupling approach is not capable of handling small fibre diameters in comparison to large fluid domains due to mesh dependencies at the interface definitions. The ALE method is more suited for this task since fibres are embedded without any mesh restrictions. Element types beam, solid, and discrete are considered for fibre modelling. It is shown that the beam formulation for ALE and 3D solid elements for the CFD method are the preferred options.","lang":"eng"}],"publication":"Materials","title":"Modelling and Simulation Strategies for Fluid–Structure-Interactions of Highly Viscous Thermoplastic Melt and Single Fibres—A Numerical Study","publisher":"MDPI AG","date_created":"2022-12-06T20:33:11Z","year":"2022","issue":"20","article_number":"7241","_id":"34254","project":[{"_id":"130","name":"TRR 285: TRR 285","grant_number":"418701707"},{"name":"TRR 285 - A: TRR 285 - Project Area A","_id":"131"},{"name":"TRR 285 – A03: TRR 285 - Subproject A03","_id":"137"}],"department":[{"_id":"630"}],"user_id":"14931","status":"public","type":"journal_article","doi":"10.3390/ma15207241","main_file_link":[{"open_access":"1","url":"https://www.mdpi.com/1996-1944/15/20/7241"}],"oa":"1","date_updated":"2023-01-02T11:06:58Z","volume":15,"author":[{"full_name":"Gröger, Benjamin","last_name":"Gröger","first_name":"Benjamin"},{"last_name":"Wang","full_name":"Wang, Jingjing","first_name":"Jingjing"},{"first_name":"Tim","full_name":"Bätzel, Tim","last_name":"Bätzel"},{"first_name":"Andreas","last_name":"Hornig","full_name":"Hornig, Andreas"},{"full_name":"Gude, Maik","last_name":"Gude","first_name":"Maik"}],"intvolume":" 15","citation":{"ama":"Gröger B, Wang J, Bätzel T, Hornig A, Gude M. Modelling and Simulation Strategies for Fluid–Structure-Interactions of Highly Viscous Thermoplastic Melt and Single Fibres—A Numerical Study. Materials. 2022;15(20). doi:10.3390/ma15207241","chicago":"Gröger, Benjamin, Jingjing Wang, Tim Bätzel, Andreas Hornig, and Maik Gude. “Modelling and Simulation Strategies for Fluid–Structure-Interactions of Highly Viscous Thermoplastic Melt and Single Fibres—A Numerical Study.” Materials 15, no. 20 (2022). https://doi.org/10.3390/ma15207241.","ieee":"B. Gröger, J. Wang, T. Bätzel, A. Hornig, and M. Gude, “Modelling and Simulation Strategies for Fluid–Structure-Interactions of Highly Viscous Thermoplastic Melt and Single Fibres—A Numerical Study,” Materials, vol. 15, no. 20, Art. no. 7241, 2022, doi: 10.3390/ma15207241.","mla":"Gröger, Benjamin, et al. “Modelling and Simulation Strategies for Fluid–Structure-Interactions of Highly Viscous Thermoplastic Melt and Single Fibres—A Numerical Study.” Materials, vol. 15, no. 20, 7241, MDPI AG, 2022, doi:10.3390/ma15207241.","short":"B. Gröger, J. Wang, T. Bätzel, A. Hornig, M. Gude, Materials 15 (2022).","bibtex":"@article{Gröger_Wang_Bätzel_Hornig_Gude_2022, title={Modelling and Simulation Strategies for Fluid–Structure-Interactions of Highly Viscous Thermoplastic Melt and Single Fibres—A Numerical Study}, volume={15}, DOI={10.3390/ma15207241}, number={207241}, journal={Materials}, publisher={MDPI AG}, author={Gröger, Benjamin and Wang, Jingjing and Bätzel, Tim and Hornig, Andreas and Gude, Maik}, year={2022} }","apa":"Gröger, B., Wang, J., Bätzel, T., Hornig, A., & Gude, M. (2022). Modelling and Simulation Strategies for Fluid–Structure-Interactions of Highly Viscous Thermoplastic Melt and Single Fibres—A Numerical Study. Materials, 15(20), Article 7241. https://doi.org/10.3390/ma15207241"},"publication_identifier":{"issn":["1996-1944"]},"publication_status":"published"},{"type":"journal_article","status":"public","user_id":"14931","department":[{"_id":"630"}],"project":[{"grant_number":"418701707","name":"TRR 285: TRR 285","_id":"130"},{"_id":"142","name":"TRR 285 – B03: TRR 285 - Subproject B03"}],"_id":"34257","publication_status":"published","publication_identifier":{"issn":["0001-5970","1619-6937"]},"citation":{"apa":"Harzheim, S., Hofmann, M., & Wallmersperger, T. (2022). Comparison of two mesh-moving techniques for finite element simulations of galvanic corrosion. Acta Mechanica, 233(11), 4427–4439. https://doi.org/10.1007/s00707-022-03326-z","short":"S. Harzheim, M. Hofmann, T. Wallmersperger, Acta Mechanica 233 (2022) 4427–4439.","mla":"Harzheim, Sven, et al. “Comparison of Two Mesh-Moving Techniques for Finite Element Simulations of Galvanic Corrosion.” Acta Mechanica, vol. 233, no. 11, Springer Science and Business Media LLC, 2022, pp. 4427–39, doi:10.1007/s00707-022-03326-z.","bibtex":"@article{Harzheim_Hofmann_Wallmersperger_2022, title={Comparison of two mesh-moving techniques for finite element simulations of galvanic corrosion}, volume={233}, DOI={10.1007/s00707-022-03326-z}, number={11}, journal={Acta Mechanica}, publisher={Springer Science and Business Media LLC}, author={Harzheim, Sven and Hofmann, Martin and Wallmersperger, Thomas}, year={2022}, pages={4427–4439} }","ama":"Harzheim S, Hofmann M, Wallmersperger T. Comparison of two mesh-moving techniques for finite element simulations of galvanic corrosion. Acta Mechanica. 2022;233(11):4427-4439. doi:10.1007/s00707-022-03326-z","ieee":"S. Harzheim, M. Hofmann, and T. Wallmersperger, “Comparison of two mesh-moving techniques for finite element simulations of galvanic corrosion,” Acta Mechanica, vol. 233, no. 11, pp. 4427–4439, 2022, doi: 10.1007/s00707-022-03326-z.","chicago":"Harzheim, Sven, Martin Hofmann, and Thomas Wallmersperger. “Comparison of Two Mesh-Moving Techniques for Finite Element Simulations of Galvanic Corrosion.” Acta Mechanica 233, no. 11 (2022): 4427–39. https://doi.org/10.1007/s00707-022-03326-z."},"intvolume":" 233","page":"4427-4439","author":[{"first_name":"Sven","last_name":"Harzheim","full_name":"Harzheim, Sven"},{"first_name":"Martin","full_name":"Hofmann, Martin","last_name":"Hofmann"},{"first_name":"Thomas","full_name":"Wallmersperger, Thomas","last_name":"Wallmersperger"}],"volume":233,"date_updated":"2023-01-02T11:07:28Z","oa":"1","main_file_link":[{"url":"https://link.springer.com/article/10.1007/s00707-022-03326-z","open_access":"1"}],"doi":"10.1007/s00707-022-03326-z","publication":"Acta Mechanica","abstract":[{"lang":"eng","text":"Galvanic corrosion is a destructive process between dissimilar metals. The present paper presents a constructed numerical test case to simulate galvanic corrosion of two dissimilar metals. This test case is used to study the accuracy of different implementations to track the dissolving anode boundary. One technique is to numerically simulate a mesh displacement based on the prescribed displacement at the anode boundary. The second method is to adjust only the boundary elements. Re-meshing after a certain number of time steps is applied to both implementations. They produce similar results for an electrical and electrochemical field problem. This work shows that mesh smoothing does not result in higher accuracy when modeling a moving anode front. Adjusting only the boundary elements is sufficient when frequent re-meshing is used."}],"language":[{"iso":"eng"}],"keyword":["Mechanical Engineering","Computational Mechanics"],"issue":"11","year":"2022","date_created":"2022-12-06T20:47:16Z","publisher":"Springer Science and Business Media LLC","title":"Comparison of two mesh-moving techniques for finite element simulations of galvanic corrosion"},{"publication_status":"published","citation":{"ieee":"U. Füssel, S. Schlegel, G. Reschke, and J. Kalich, “Electrical Contacting of Aluminum Bus Bars Using Clinching and Functional Elements,” 2022, doi: 10.3390/engproc2022026005.","chicago":"Füssel, Uwe, Stephan Schlegel, Gregor Reschke, and Jan Kalich. “Electrical Contacting of Aluminum Bus Bars Using Clinching and Functional Elements.” In SFU/ICAFT 2022. MDPI, 2022. https://doi.org/10.3390/engproc2022026005.","ama":"Füssel U, Schlegel S, Reschke G, Kalich J. Electrical Contacting of Aluminum Bus Bars Using Clinching and Functional Elements. In: SFU/ICAFT 2022. MDPI; 2022. doi:10.3390/engproc2022026005","apa":"Füssel, U., Schlegel, S., Reschke, G., & Kalich, J. (2022). Electrical Contacting of Aluminum Bus Bars Using Clinching and Functional Elements. SFU/ICAFT 2022. https://doi.org/10.3390/engproc2022026005","bibtex":"@inproceedings{Füssel_Schlegel_Reschke_Kalich_2022, title={Electrical Contacting of Aluminum Bus Bars Using Clinching and Functional Elements}, DOI={10.3390/engproc2022026005}, booktitle={SFU/ICAFT 2022}, publisher={MDPI}, author={Füssel, Uwe and Schlegel, Stephan and Reschke, Gregor and Kalich, Jan}, year={2022} }","short":"U. Füssel, S. Schlegel, G. Reschke, J. Kalich, in: SFU/ICAFT 2022, MDPI, 2022.","mla":"Füssel, Uwe, et al. “Electrical Contacting of Aluminum Bus Bars Using Clinching and Functional Elements.” SFU/ICAFT 2022, MDPI, 2022, doi:10.3390/engproc2022026005."},"year":"2022","date_created":"2022-12-06T19:12:23Z","author":[{"first_name":"Uwe","last_name":"Füssel","full_name":"Füssel, Uwe"},{"first_name":"Stephan","last_name":"Schlegel","full_name":"Schlegel, Stephan"},{"full_name":"Reschke, Gregor","last_name":"Reschke","first_name":"Gregor"},{"full_name":"Kalich, Jan","last_name":"Kalich","first_name":"Jan"}],"oa":"1","date_updated":"2023-01-02T11:09:44Z","publisher":"MDPI","main_file_link":[{"open_access":"1"}],"doi":"10.3390/engproc2022026005","title":"Electrical Contacting of Aluminum Bus Bars Using Clinching and Functional Elements","type":"conference","publication":"SFU/ICAFT 2022","status":"public","abstract":[{"lang":"eng","text":"As a joining-by-forming process, clinching and the use of functional elements enable low-energy joining of components through form, force, and, under certain conditions, material closure. In addition to the transmission of mechanical forces, these joining processes can be qualified for additional electrical contact within the scope of functional integration for electro-mobile applications. For this purpose, maximizing the force and material closure is necessary to ensure a long-term, stable transmission of electrical currents. To this end, the electrical properties of the joints were optimized. The investigations carried out show the long-term behavior under normal operating conditions and the short-circuit case."}],"user_id":"14931","department":[{"_id":"630"}],"project":[{"_id":"130","name":"TRR 285: TRR 285","grant_number":"418701707"},{"_id":"131","name":"TRR 285 - A: TRR 285 - Project Area A"},{"_id":"138","name":"TRR 285 – A04: TRR 285 - Subproject A04"}],"_id":"34250","language":[{"iso":"eng"}]},{"intvolume":" 926","page":"1489-1497","citation":{"ieee":"D. Köhler, R. Stephan, R. Kupfer, J. Troschitz, A. Brosius, and M. Gude, “Investigations on Combined in situ CT and Acoustic Analysis during Clinching,” in Key Engineering Materials, 2022, vol. 926, pp. 1489–1497, doi: 10.4028/p-32330d.","chicago":"Köhler, Daniel, Richard Stephan, Robert Kupfer, Juliane Troschitz, Alexander Brosius, and Maik Gude. “Investigations on Combined in Situ CT and Acoustic Analysis during Clinching.” In Key Engineering Materials, 926:1489–97. Trans Tech Publications, Ltd., 2022. https://doi.org/10.4028/p-32330d.","ama":"Köhler D, Stephan R, Kupfer R, Troschitz J, Brosius A, Gude M. Investigations on Combined in situ CT and Acoustic Analysis during Clinching. In: Key Engineering Materials. Vol 926. Trans Tech Publications, Ltd.; 2022:1489-1497. doi:10.4028/p-32330d","apa":"Köhler, D., Stephan, R., Kupfer, R., Troschitz, J., Brosius, A., & Gude, M. (2022). Investigations on Combined in situ CT and Acoustic Analysis during Clinching. Key Engineering Materials, 926, 1489–1497. https://doi.org/10.4028/p-32330d","short":"D. Köhler, R. Stephan, R. Kupfer, J. Troschitz, A. Brosius, M. Gude, in: Key Engineering Materials, Trans Tech Publications, Ltd., 2022, pp. 1489–1497.","bibtex":"@inproceedings{Köhler_Stephan_Kupfer_Troschitz_Brosius_Gude_2022, title={Investigations on Combined in situ CT and Acoustic Analysis during Clinching}, volume={926}, DOI={10.4028/p-32330d}, booktitle={Key Engineering Materials}, publisher={Trans Tech Publications, Ltd.}, author={Köhler, Daniel and Stephan, Richard and Kupfer, Robert and Troschitz, Juliane and Brosius, Alexander and Gude, Maik}, year={2022}, pages={1489–1497} }","mla":"Köhler, Daniel, et al. “Investigations on Combined in Situ CT and Acoustic Analysis during Clinching.” Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 1489–97, doi:10.4028/p-32330d."},"publication_identifier":{"issn":["1662-9795"]},"publication_status":"published","doi":"10.4028/p-32330d","volume":926,"author":[{"first_name":"Daniel","last_name":"Köhler","full_name":"Köhler, Daniel"},{"last_name":"Stephan","full_name":"Stephan, Richard","first_name":"Richard"},{"full_name":"Kupfer, Robert","last_name":"Kupfer","first_name":"Robert"},{"last_name":"Troschitz","full_name":"Troschitz, Juliane","first_name":"Juliane"},{"full_name":"Brosius, Alexander","last_name":"Brosius","first_name":"Alexander"},{"first_name":"Maik","last_name":"Gude","full_name":"Gude, Maik"}],"date_updated":"2023-01-02T11:13:59Z","status":"public","type":"conference","department":[{"_id":"630"}],"user_id":"14931","_id":"34280","project":[{"grant_number":"418701707","_id":"130","name":"TRR 285: TRR 285"},{"_id":"133","name":"TRR 285 - C: TRR 285 - Project Area C"},{"name":"TRR 285 – C04: TRR 285 - Subproject C04","_id":"148"}],"year":"2022","title":"Investigations on Combined in situ CT and Acoustic Analysis during Clinching","date_created":"2022-12-07T16:38:44Z","publisher":"Trans Tech Publications, Ltd.","abstract":[{"lang":"eng","text":"Clinching is a cost efficient method for joining components in series production. To assure the clinch point’s quality, the force displacement curve during clinching or the bottom thickness are monitored. The most significant geometrical characteristics of the clinch point, neck thickness and undercut, are usually tested destructively by microsectioning. However, micrograph preparation goes ahead with a resetting of elastic deformations and crack-closing after unloading. To generate a comprehensive knowledge of the clinch point’s inner geometry under load, in-situ computed tomography (CT) and acoustic testing (TDA) can be combined. While the TDA is highly sensitive to the inner state of the clinch point, it could detect critical events like crack development during loading. If such events are indicated, the loading process is stopped and a stepped in-situ CT of the following crack and deformation development is performed. In this paper, the concept is applied to the process of clinching itself, providing a detailed three-dimensional insight in the development of the joining zone. A test set-up is used which allows a stepwise clinching of two aluminium sheets EN AW 6014. Furthermore, this set-up is positioned within a CT system. In order to minimize X-ray absorption, a beryllium cylinder is used within the set-up frame and clinching tools are made from Si3N4. The actuator and sensor necessary for the TDA are integrated in the set-up. In regular process steps, the clinching process is interrupted in order to perform a TDA and a CT scan. In order to enhance the visibility of the interface, a thin tin layer is positioned between the sheets prior clinching. It is shown, that the test-set up allows a monitoring of the dynamic behaviour of the specimen during clinching while the CT scans visualize the inner geometry and material flow non-destructively."}],"publication":"Key Engineering Materials","language":[{"iso":"eng"}],"keyword":["Mechanical Engineering","Mechanics of Materials","General Materials Science"]},{"year":"2022","title":"Robust estimation of clinch joint characteristics based on data-driven methods","publisher":"Springer Science and Business Media LLC","date_created":"2022-12-14T12:24:29Z","abstract":[{"text":"Given a steadily increasing demand on multi-material lightweight designs, fast and cost-efficient production technologies, such as the mechanical joining process clinching, are becoming more and more relevant for series production. Since the application of such joining techniques often base on the ability to reach similar or even better joint loading capacities compared to established joining processes (e.g., spot welding), few contributions investigated the systematic improvement of clinch joint characteristics. In this regard, the use of data-driven methods in combination with optimization algorithms showed already high potentials for the analysis of individual joints and the definition of optimal tool configurations. However, the often missing consideration of uncertainties, such as varying material properties, and the related calculation of their impact on clinch joint properties can lead to poor estimation results and thus to a decreased reliability of the entire joint connection. This can cause major challenges, especially for the design and dimensioning of safety-relevant components, such as in car bodies. Motivated by this, the presented contribution introduces a novel method for the robust estimation of clinch joint characteristics including uncertainties of varying and versatile process chains in mechanical joining. Therefore, the utilization of Gaussian process regression models is demonstrated and evaluated regarding the ability to achieve sufficient prediction qualities.","lang":"eng"}],"publication":"The International Journal of Advanced Manufacturing Technology","keyword":["Industrial and Manufacturing Engineering","Computer Science Applications","Mechanical Engineering","Software","Control and Systems Engineering"],"language":[{"iso":"eng"}],"citation":{"short":"C. Zirngibl, B. Schleich, S. Wartzack, The International Journal of Advanced Manufacturing Technology (2022).","mla":"Zirngibl, Christoph, et al. “Robust Estimation of Clinch Joint Characteristics Based on Data-Driven Methods.” The International Journal of Advanced Manufacturing Technology, Springer Science and Business Media LLC, 2022, doi:10.1007/s00170-022-10441-7.","bibtex":"@article{Zirngibl_Schleich_Wartzack_2022, title={Robust estimation of clinch joint characteristics based on data-driven methods}, DOI={10.1007/s00170-022-10441-7}, journal={The International Journal of Advanced Manufacturing Technology}, publisher={Springer Science and Business Media LLC}, author={Zirngibl, Christoph and Schleich, Benjamin and Wartzack, Sandro}, year={2022} }","apa":"Zirngibl, C., Schleich, B., & Wartzack, S. (2022). Robust estimation of clinch joint characteristics based on data-driven methods. The International Journal of Advanced Manufacturing Technology. https://doi.org/10.1007/s00170-022-10441-7","chicago":"Zirngibl, Christoph, Benjamin Schleich, and Sandro Wartzack. “Robust Estimation of Clinch Joint Characteristics Based on Data-Driven Methods.” The International Journal of Advanced Manufacturing Technology, 2022. https://doi.org/10.1007/s00170-022-10441-7.","ieee":"C. Zirngibl, B. Schleich, and S. Wartzack, “Robust estimation of clinch joint characteristics based on data-driven methods,” The International Journal of Advanced Manufacturing Technology, 2022, doi: 10.1007/s00170-022-10441-7.","ama":"Zirngibl C, Schleich B, Wartzack S. Robust estimation of clinch joint characteristics based on data-driven methods. The International Journal of Advanced Manufacturing Technology. Published online 2022. doi:10.1007/s00170-022-10441-7"},"publication_status":"published","publication_identifier":{"issn":["0268-3768","1433-3015"]},"main_file_link":[{"open_access":"1","url":"https://link.springer.com/article/10.1007/s00170-022-10441-7"}],"doi":"10.1007/s00170-022-10441-7","date_updated":"2023-01-02T11:14:26Z","oa":"1","author":[{"first_name":"Christoph","last_name":"Zirngibl","full_name":"Zirngibl, Christoph"},{"full_name":"Schleich, Benjamin","last_name":"Schleich","first_name":"Benjamin"},{"first_name":"Sandro","full_name":"Wartzack, Sandro","last_name":"Wartzack"}],"status":"public","type":"journal_article","project":[{"grant_number":"418701707","name":"TRR 285: TRR 285","_id":"130"},{"_id":"132","name":"TRR 285 - B: TRR 285 - Project Area B"},{"name":"TRR 285 – B05: TRR 285 - Subproject B05","_id":"144"}],"_id":"34414","user_id":"14931","department":[{"_id":"630"}]},{"status":"public","abstract":[{"lang":"eng","text":"Mechanical clinching is used to create lightweight hybrid structures. In order to estimate the service life of clinched components, its fatigue properties need to be known under different mechanical loading conditions. In addition to fatigue, corrosion is another factor that affects the fatigue life of clinched joints. In the literature, many corrosion and high-cycle fatigue damage models exist. However, little is known about how both phenomena interact in clinched joints. In this article, the influence of galvanic corrosion on clinched EN AW-6014/HCT590X + Z sheets on the fatigue life is investigated by means of numerical simulations and experimental results. An accurate prediction of the Wöhler lines of non-corroded and pre-corroded clinched specimens is shown."}],"publication":"Mechanics of Advanced Materials and Structures","type":"journal_article","language":[{"iso":"eng"}],"keyword":["Mechanical Engineering","Mechanics of Materials","General Materials Science","General Mathematics","Civil and Structural Engineering"],"department":[{"_id":"630"}],"user_id":"14931","_id":"34261","project":[{"grant_number":"418701707","_id":"130","name":"TRR 285: TRR 285"},{"_id":"132","name":"TRR 285 - B: TRR 285 - Project Area B"},{"_id":"142","name":"TRR 285 – B03: TRR 285 - Subproject B03"}],"page":"1-6","citation":{"ama":"Harzheim S, Hofmann M, Wallmersperger T. Numerical fatigue life prediction of corroded and non-corroded clinched joints. Mechanics of Advanced Materials and Structures. Published online 2022:1-6. doi:10.1080/15376494.2022.2140233","chicago":"Harzheim, Sven, Martin Hofmann, and Thomas Wallmersperger. “Numerical Fatigue Life Prediction of Corroded and Non-Corroded Clinched Joints.” Mechanics of Advanced Materials and Structures, 2022, 1–6. https://doi.org/10.1080/15376494.2022.2140233.","ieee":"S. Harzheim, M. Hofmann, and T. Wallmersperger, “Numerical fatigue life prediction of corroded and non-corroded clinched joints,” Mechanics of Advanced Materials and Structures, pp. 1–6, 2022, doi: 10.1080/15376494.2022.2140233.","bibtex":"@article{Harzheim_Hofmann_Wallmersperger_2022, title={Numerical fatigue life prediction of corroded and non-corroded clinched joints}, DOI={10.1080/15376494.2022.2140233}, journal={Mechanics of Advanced Materials and Structures}, publisher={Informa UK Limited}, author={Harzheim, Sven and Hofmann, Martin and Wallmersperger, Thomas}, year={2022}, pages={1–6} }","short":"S. Harzheim, M. Hofmann, T. Wallmersperger, Mechanics of Advanced Materials and Structures (2022) 1–6.","mla":"Harzheim, Sven, et al. “Numerical Fatigue Life Prediction of Corroded and Non-Corroded Clinched Joints.” Mechanics of Advanced Materials and Structures, Informa UK Limited, 2022, pp. 1–6, doi:10.1080/15376494.2022.2140233.","apa":"Harzheim, S., Hofmann, M., & Wallmersperger, T. (2022). Numerical fatigue life prediction of corroded and non-corroded clinched joints. Mechanics of Advanced Materials and Structures, 1–6. https://doi.org/10.1080/15376494.2022.2140233"},"year":"2022","publication_identifier":{"issn":["1537-6494","1537-6532"]},"publication_status":"published","doi":"10.1080/15376494.2022.2140233","title":"Numerical fatigue life prediction of corroded and non-corroded clinched joints","author":[{"last_name":"Harzheim","full_name":"Harzheim, Sven","first_name":"Sven"},{"last_name":"Hofmann","full_name":"Hofmann, Martin","first_name":"Martin"},{"first_name":"Thomas","last_name":"Wallmersperger","full_name":"Wallmersperger, Thomas"}],"date_created":"2022-12-07T10:03:17Z","publisher":"Informa UK Limited","date_updated":"2023-01-02T11:10:49Z"},{"language":[{"iso":"ger"}],"user_id":"26589","_id":"35115","status":"public","type":"book","title":"Rechnungslegung nach IFRS und HGB: Lehrbuch zur Theorie und Praxis der Unternehmenspublizität mit Beispielen und Übungen","author":[{"full_name":"Ruhnke, Klaus","last_name":"Ruhnke","first_name":"Klaus"},{"full_name":"Simons, Dirk","last_name":"Simons","first_name":"Dirk"},{"first_name":"Sönke","id":"46447","full_name":"Sievers, Sönke","last_name":"Sievers"}],"date_created":"2023-01-03T08:08:42Z","publisher":"Schäffer-Poeschel","date_updated":"2023-01-03T08:10:30Z","citation":{"mla":"Ruhnke, Klaus, et al. Rechnungslegung nach IFRS und HGB: Lehrbuch zur Theorie und Praxis der Unternehmenspublizität mit Beispielen und Übungen. 5., Schäffer-Poeschel, 2022.","short":"K. Ruhnke, D. Simons, S. Sievers, Rechnungslegung nach IFRS und HGB: Lehrbuch zur Theorie und Praxis der Unternehmenspublizität mit Beispielen und Übungen, 5., Schäffer-Poeschel, Stuttgart, 2022.","bibtex":"@book{Ruhnke_Simons_Sievers_2022, place={Stuttgart}, edition={5.}, title={Rechnungslegung nach IFRS und HGB: Lehrbuch zur Theorie und Praxis der Unternehmenspublizität mit Beispielen und Übungen}, publisher={Schäffer-Poeschel}, author={Ruhnke, Klaus and Simons, Dirk and Sievers, Sönke}, year={2022} }","apa":"Ruhnke, K., Simons, D., & Sievers, S. (2022). Rechnungslegung nach IFRS und HGB: Lehrbuch zur Theorie und Praxis der Unternehmenspublizität mit Beispielen und Übungen (5.). Schäffer-Poeschel.","ieee":"K. Ruhnke, D. Simons, and S. Sievers, Rechnungslegung nach IFRS und HGB: Lehrbuch zur Theorie und Praxis der Unternehmenspublizität mit Beispielen und Übungen, 5. Stuttgart: Schäffer-Poeschel, 2022.","chicago":"Ruhnke, Klaus, Dirk Simons, and Sönke Sievers. Rechnungslegung nach IFRS und HGB: Lehrbuch zur Theorie und Praxis der Unternehmenspublizität mit Beispielen und Übungen. 5. Stuttgart: Schäffer-Poeschel, 2022.","ama":"Ruhnke K, Simons D, Sievers S. Rechnungslegung nach IFRS und HGB: Lehrbuch zur Theorie und Praxis der Unternehmenspublizität mit Beispielen und Übungen. 5. Schäffer-Poeschel; 2022."},"place":"Stuttgart","year":"2022","edition":"5."},{"author":[{"first_name":"Hamed","full_name":"Nikbakht, Hamed","last_name":"Nikbakht"},{"first_name":"Mohammad Talebi","full_name":"Khoshmehr, Mohammad Talebi","last_name":"Khoshmehr"},{"first_name":"Bob","full_name":"van Someren, Bob","last_name":"van Someren"},{"last_name":"Teichrib","full_name":"Teichrib, Dieter","first_name":"Dieter"},{"orcid":"0000-0002-6331-9348","last_name":"Hammer","full_name":"Hammer, Manfred","id":"48077","first_name":"Manfred"},{"full_name":"Förstner, Jens","id":"158","last_name":"Förstner","orcid":"0000-0001-7059-9862","first_name":"Jens"},{"first_name":"B. Imran","full_name":"Akca, B. Imran","last_name":"Akca"}],"volume":48,"date_updated":"2023-01-03T10:37:34Z","doi":"10.1364/ol.476537","publication_status":"published","publication_identifier":{"issn":["0146-9592","1539-4794"]},"has_accepted_license":"1","citation":{"mla":"Nikbakht, Hamed, et al. “Asymmetric, Non-Uniform 3-DB Directional Coupler with 300-Nm Bandwidth and a Small Footprint.” Optics Letters, vol. 48, no. 2, Optica Publishing Group, 2022, p. 207, doi:10.1364/ol.476537.","short":"H. Nikbakht, M.T. Khoshmehr, B. van Someren, D. Teichrib, M. Hammer, J. Förstner, B.I. Akca, Optics Letters 48 (2022) 207.","bibtex":"@article{Nikbakht_Khoshmehr_van Someren_Teichrib_Hammer_Förstner_Akca_2022, title={Asymmetric, non-uniform 3-dB directional coupler with 300-nm bandwidth and a small footprint}, volume={48}, DOI={10.1364/ol.476537}, number={2}, journal={Optics Letters}, publisher={Optica Publishing Group}, author={Nikbakht, Hamed and Khoshmehr, Mohammad Talebi and van Someren, Bob and Teichrib, Dieter and Hammer, Manfred and Förstner, Jens and Akca, B. Imran}, year={2022}, pages={207} }","apa":"Nikbakht, H., Khoshmehr, M. T., van Someren, B., Teichrib, D., Hammer, M., Förstner, J., & Akca, B. I. (2022). Asymmetric, non-uniform 3-dB directional coupler with 300-nm bandwidth and a small footprint. Optics Letters, 48(2), 207. https://doi.org/10.1364/ol.476537","chicago":"Nikbakht, Hamed, Mohammad Talebi Khoshmehr, Bob van Someren, Dieter Teichrib, Manfred Hammer, Jens Förstner, and B. Imran Akca. “Asymmetric, Non-Uniform 3-DB Directional Coupler with 300-Nm Bandwidth and a Small Footprint.” Optics Letters 48, no. 2 (2022): 207. https://doi.org/10.1364/ol.476537.","ieee":"H. Nikbakht et al., “Asymmetric, non-uniform 3-dB directional coupler with 300-nm bandwidth and a small footprint,” Optics Letters, vol. 48, no. 2, p. 207, 2022, doi: 10.1364/ol.476537.","ama":"Nikbakht H, Khoshmehr MT, van Someren B, et al. Asymmetric, non-uniform 3-dB directional coupler with 300-nm bandwidth and a small footprint. Optics Letters. 2022;48(2):207. doi:10.1364/ol.476537"},"page":"207","intvolume":" 48","user_id":"158","department":[{"_id":"61"},{"_id":"230"}],"_id":"35128","file_date_updated":"2023-01-03T09:36:34Z","type":"journal_article","status":"public","date_created":"2023-01-03T09:32:47Z","publisher":"Optica Publishing Group","title":"Asymmetric, non-uniform 3-dB directional coupler with 300-nm bandwidth and a small footprint","issue":"2","year":"2022","language":[{"iso":"eng"}],"ddc":["530"],"keyword":["tet_topic_waveguide"],"publication":"Optics Letters","file":[{"relation":"main_file","embargo_to":"open_access","content_type":"application/pdf","file_size":3731864,"embargo":"2024-01-03","file_id":"35129","access_level":"local","file_name":"2023-01 Nikbakht - Optics Letter - Asymmetric, non-uniform 3-dB directional coupler with 300-nm bandwidth and small footprint.pdf","date_updated":"2023-01-03T09:36:34Z","creator":"fossie","date_created":"2023-01-03T09:36:34Z"}],"abstract":[{"text":"Here we demonstrate a new, to the best of our knowledge, type of 3-dB coupler that has an ultra-broadband operational range from 1300 to 1600 nm with low fabrication sensitivity. The overall device size is 800 µm including in/out S-bend waveguides. The coupler is an asymmetric non-uniform directional coupler that consists of two tapered waveguides. One of the coupler arms is shifted by 100 µm in the propagation direction, which results in a more wavelength-insensitive 3-dB response compared to a standard (not shifted) coupler. Moreover, compared to a long adiabatic coupler, we achieved a similar wavelength response at a 16-times-smaller device length. The couplers were fabricated using the silicon nitride platform of Lionix International. We also experimentally demonstrated an optical switch that is made by using two of these couplers in a Mach–Zehnder interferometer configuration. According to experimental results, this optical switch exhibits –10 dB of extinction ratio over the 1500–1600 nm wavelength range. Our results indicate that this new type of coupler holds great promise for various applications, including optical imaging, telecommunications, and reconfigurable photonic processors where compact, fabrication-tolerant, and wavelength-insensitive couplers are essential.","lang":"eng"}]},{"title":"Separation Of Multi-Component Parts For Mechanical Recycling – Study About Basic Approaches Using A Heating Process","conference":{"location":"Fukuoka","name":"37th International Conference of the Polymer Processing Society (PPS)"},"date_updated":"2023-01-03T12:32:16Z","author":[{"first_name":"Matthias","last_name":"Hopp","full_name":"Hopp, Matthias","id":"13142"},{"first_name":"Leon","last_name":"Schäffer","full_name":"Schäffer, Leon","id":"57116"}],"date_created":"2022-12-21T14:35:39Z","year":"2022","citation":{"ama":"Hopp M, Schäffer L. Separation Of Multi-Component Parts For Mechanical Recycling – Study About Basic Approaches Using A Heating Process. In: ; 2022.","chicago":"Hopp, Matthias, and Leon Schäffer. “Separation Of Multi-Component Parts For Mechanical Recycling – Study About Basic Approaches Using A Heating Process,” 2022.","ieee":"M. Hopp and L. Schäffer, “Separation Of Multi-Component Parts For Mechanical Recycling – Study About Basic Approaches Using A Heating Process,” presented at the 37th International Conference of the Polymer Processing Society (PPS), Fukuoka, 2022.","apa":"Hopp, M., & Schäffer, L. (2022). Separation Of Multi-Component Parts For Mechanical Recycling – Study About Basic Approaches Using A Heating Process. 37th International Conference of the Polymer Processing Society (PPS), Fukuoka.","short":"M. Hopp, L. Schäffer, in: 2022.","mla":"Hopp, Matthias, and Leon Schäffer. Separation Of Multi-Component Parts For Mechanical Recycling – Study About Basic Approaches Using A Heating Process. 2022.","bibtex":"@inproceedings{Hopp_Schäffer_2022, title={Separation Of Multi-Component Parts For Mechanical Recycling – Study About Basic Approaches Using A Heating Process}, author={Hopp, Matthias and Schäffer, Leon}, year={2022} }"},"language":[{"iso":"eng"}],"_id":"34744","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"user_id":"44116","status":"public","type":"conference"},{"type":"newspaper_article","publication":"Joining Plastic","status":"public","user_id":"44116","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"publication_date":"2022","_id":"33287","language":[{"iso":"eng"}],"publication_identifier":{"issn":["1864-3450"]},"citation":{"ama":"Moritzer E, Held C, Hillemeyer J. Dimensionierung und Optimierung von im FDM-Verfahren 3D-gedruckten Direktverschraubungen aus ABS. Joining Plastic. 2022:84-90.","apa":"Moritzer, E., Held, C., & Hillemeyer, J. (2022). Dimensionierung und Optimierung von im FDM-Verfahren 3D-gedruckten Direktverschraubungen aus ABS. Joining Plastic, 84–90.","mla":"Moritzer, Elmar, et al. “Dimensionierung Und Optimierung von Im FDM-Verfahren 3D-Gedruckten Direktverschraubungen Aus ABS.” Joining Plastic, 2022, pp. 84–90.","bibtex":"@article{Moritzer_Held_Hillemeyer_2022, title={Dimensionierung und Optimierung von im FDM-Verfahren 3D-gedruckten Direktverschraubungen aus ABS}, journal={Joining Plastic}, author={Moritzer, Elmar and Held, Christian and Hillemeyer, Johannes}, year={2022}, pages={84–90} }","short":"E. Moritzer, C. Held, J. Hillemeyer, Joining Plastic (2022) 84–90.","ieee":"E. Moritzer, C. Held, and J. Hillemeyer, “Dimensionierung und Optimierung von im FDM-Verfahren 3D-gedruckten Direktverschraubungen aus ABS,” Joining Plastic, pp. 84–90, 2022.","chicago":"Moritzer, Elmar, Christian Held, and Johannes Hillemeyer. “Dimensionierung Und Optimierung von Im FDM-Verfahren 3D-Gedruckten Direktverschraubungen Aus ABS.” Joining Plastic, 2022."},"page":"84-90","year":"2022","date_created":"2022-09-08T08:21:36Z","author":[{"last_name":"Moritzer","full_name":"Moritzer, Elmar","id":"20531","first_name":"Elmar"},{"last_name":"Held","id":"40647","full_name":"Held, Christian","first_name":"Christian"},{"first_name":"Johannes","id":"27285","full_name":"Hillemeyer, Johannes","last_name":"Hillemeyer"}],"date_updated":"2023-01-03T12:34:34Z","title":"Dimensionierung und Optimierung von im FDM-Verfahren 3D-gedruckten Direktverschraubungen aus ABS"},{"language":[{"iso":"eng"}],"_id":"33289","publication_date":"2022","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"user_id":"44116","status":"public","publication":"Kunststoffe","type":"newspaper_article","title":"Mit der richtigen Auslegung zur sicheren Verbindung","date_updated":"2023-01-03T12:33:54Z","author":[{"first_name":"Elmar","id":"20531","full_name":"Moritzer, Elmar","last_name":"Moritzer"},{"first_name":"Christian","id":"40647","full_name":"Held, Christian","last_name":"Held"},{"full_name":"Hopmann, C.","last_name":"Hopmann","first_name":"C."},{"last_name":"Kramer","full_name":"Kramer, M.","first_name":"M."}],"date_created":"2022-09-08T08:25:32Z","year":"2022","page":"30-33","citation":{"apa":"Moritzer, E., Held, C., Hopmann, C., & Kramer, M. (2022). Mit der richtigen Auslegung zur sicheren Verbindung. Kunststoffe, 30–33.","mla":"Moritzer, Elmar, et al. “Mit Der Richtigen Auslegung Zur Sicheren Verbindung.” Kunststoffe, 2022, pp. 30–33.","short":"E. Moritzer, C. Held, C. Hopmann, M. Kramer, Kunststoffe (2022) 30–33.","bibtex":"@article{Moritzer_Held_Hopmann_Kramer_2022, title={Mit der richtigen Auslegung zur sicheren Verbindung}, journal={Kunststoffe}, author={Moritzer, Elmar and Held, Christian and Hopmann, C. and Kramer, M.}, year={2022}, pages={30–33} }","ama":"Moritzer E, Held C, Hopmann C, Kramer M. Mit der richtigen Auslegung zur sicheren Verbindung. Kunststoffe. 2022:30-33.","chicago":"Moritzer, Elmar, Christian Held, C. Hopmann, and M. Kramer. “Mit Der Richtigen Auslegung Zur Sicheren Verbindung.” Kunststoffe, 2022.","ieee":"E. Moritzer, C. Held, C. Hopmann, and M. Kramer, “Mit der richtigen Auslegung zur sicheren Verbindung,” Kunststoffe, pp. 30–33, 2022."},"publication_identifier":{"issn":["0023-5563"]}},{"publication_status":"published","publication_identifier":{"eisbn":["9783763972579"]},"place":"Bielefeld","year":"2022","citation":{"ama":"Jonas-Ahrend G, Vernholz M, Temmen K. Wie bewährt sich das duale berufliche Ausbildungssystem der industriellen Metall und Elektroausbildung unter Pandemiebedingungen? Lehrkräfte und Auszubildende reflektieren. In: Heisler D, Meier JA, eds. Berufsausbildung zwischen Hygienemaßnahmen und Lockdown(s): Folgen für die schulische und außerschulische Berufsausbildung in Schule, im Betrieb und bei Bildungsträgern. wbv ; 2022:257-276. doi:10.3278/9783763972579","chicago":"Jonas-Ahrend, Gabriela, Mats Vernholz, and Katrin Temmen. “Wie bewährt sich das duale berufliche Ausbildungssystem der industriellen Metall und Elektroausbildung unter Pandemiebedingungen? Lehrkräfte und Auszubildende reflektieren.” In Berufsausbildung zwischen Hygienemaßnahmen und Lockdown(s): Folgen für die schulische und außerschulische Berufsausbildung in Schule, im Betrieb und bei Bildungsträgern, edited by Dietmar Heisler and Jörg A. Meier, 257–76. Bielefeld: wbv , 2022. https://doi.org/10.3278/9783763972579.","ieee":"G. Jonas-Ahrend, M. Vernholz, and K. Temmen, “Wie bewährt sich das duale berufliche Ausbildungssystem der industriellen Metall und Elektroausbildung unter Pandemiebedingungen? Lehrkräfte und Auszubildende reflektieren,” in Berufsausbildung zwischen Hygienemaßnahmen und Lockdown(s): Folgen für die schulische und außerschulische Berufsausbildung in Schule, im Betrieb und bei Bildungsträgern, D. Heisler and J. A. Meier, Eds. Bielefeld: wbv , 2022, pp. 257–276.","apa":"Jonas-Ahrend, G., Vernholz, M., & Temmen, K. (2022). Wie bewährt sich das duale berufliche Ausbildungssystem der industriellen Metall und Elektroausbildung unter Pandemiebedingungen? Lehrkräfte und Auszubildende reflektieren. In D. Heisler & J. A. Meier (Eds.), Berufsausbildung zwischen Hygienemaßnahmen und Lockdown(s): Folgen für die schulische und außerschulische Berufsausbildung in Schule, im Betrieb und bei Bildungsträgern (pp. 257–276). wbv . https://doi.org/10.3278/9783763972579","short":"G. Jonas-Ahrend, M. Vernholz, K. Temmen, in: D. Heisler, J.A. Meier (Eds.), Berufsausbildung zwischen Hygienemaßnahmen und Lockdown(s): Folgen für die schulische und außerschulische Berufsausbildung in Schule, im Betrieb und bei Bildungsträgern, wbv , Bielefeld, 2022, pp. 257–276.","bibtex":"@inbook{Jonas-Ahrend_Vernholz_Temmen_2022, place={Bielefeld}, title={Wie bewährt sich das duale berufliche Ausbildungssystem der industriellen Metall und Elektroausbildung unter Pandemiebedingungen? Lehrkräfte und Auszubildende reflektieren}, DOI={10.3278/9783763972579}, booktitle={Berufsausbildung zwischen Hygienemaßnahmen und Lockdown(s): Folgen für die schulische und außerschulische Berufsausbildung in Schule, im Betrieb und bei Bildungsträgern}, publisher={wbv }, author={Jonas-Ahrend, Gabriela and Vernholz, Mats and Temmen, Katrin}, editor={Heisler, Dietmar and Meier, Jörg A.}, year={2022}, pages={257–276} }","mla":"Jonas-Ahrend, Gabriela, et al. “Wie bewährt sich das duale berufliche Ausbildungssystem der industriellen Metall und Elektroausbildung unter Pandemiebedingungen? Lehrkräfte und Auszubildende reflektieren.” Berufsausbildung zwischen Hygienemaßnahmen und Lockdown(s): Folgen für die schulische und außerschulische Berufsausbildung in Schule, im Betrieb und bei Bildungsträgern, edited by Dietmar Heisler and Jörg A. Meier, wbv , 2022, pp. 257–76, doi:10.3278/9783763972579."},"page":"257-276","date_updated":"2023-01-04T08:13:21Z","publisher":"wbv ","author":[{"last_name":"Jonas-Ahrend","id":"77633","full_name":"Jonas-Ahrend, Gabriela","first_name":"Gabriela"},{"last_name":"Vernholz","full_name":"Vernholz, Mats","id":"76955","first_name":"Mats"},{"last_name":"Temmen","id":"30086","full_name":"Temmen, Katrin","first_name":"Katrin"}],"date_created":"2022-10-13T06:39:22Z","title":"Wie bewährt sich das duale berufliche Ausbildungssystem der industriellen Metall und Elektroausbildung unter Pandemiebedingungen? Lehrkräfte und Auszubildende reflektieren","doi":"10.3278/9783763972579","type":"book_chapter","publication":"Berufsausbildung zwischen Hygienemaßnahmen und Lockdown(s): Folgen für die schulische und außerschulische Berufsausbildung in Schule, im Betrieb und bei Bildungsträgern","editor":[{"first_name":"Dietmar","full_name":"Heisler, Dietmar","last_name":"Heisler"},{"first_name":"Jörg A.","last_name":"Meier","full_name":"Meier, Jörg A."}],"status":"public","_id":"33703","user_id":"76955","department":[{"_id":"300"}],"language":[{"iso":"ger"}]},{"doi":"10.1515/pm-2022-1018","title":"Reproducibility and Scattering in Additive Manufacturing: Results from a Round Robin on PBF-LB/M AlSi10Mg Alloy","volume":59,"date_created":"2022-10-11T13:15:48Z","author":[{"first_name":"M.","last_name":"Schneider","full_name":"Schneider, M."},{"last_name":"Bettge","full_name":"Bettge, D.","first_name":"D."},{"first_name":"M.","last_name":"Binder","full_name":"Binder, M."},{"first_name":"K.","last_name":"Dollmeier","full_name":"Dollmeier, K."},{"orcid":"0000-0001-9560-9510","last_name":"Dreyer","id":"66695","full_name":"Dreyer, Malte","first_name":"Malte"},{"first_name":"K.","last_name":"Hilgenberg","full_name":"Hilgenberg, K."},{"first_name":"B.","last_name":"Klöden","full_name":"Klöden, B."},{"first_name":"T.","full_name":"Schlingmann, T.","last_name":"Schlingmann"},{"last_name":"Schmidt","full_name":"Schmidt, J.","first_name":"J."}],"publisher":"Walter de Gruyter GmbH","date_updated":"2023-01-04T14:48:17Z","page":"580-614","intvolume":" 59","citation":{"chicago":"Schneider, M., D. Bettge, M. Binder, K. Dollmeier, Malte Dreyer, K. Hilgenberg, B. Klöden, T. Schlingmann, and J. Schmidt. “Reproducibility and Scattering in Additive Manufacturing: Results from a Round Robin on PBF-LB/M AlSi10Mg Alloy.” Practical Metallography 59, no. 10 (2022): 580–614. https://doi.org/10.1515/pm-2022-1018.","ieee":"M. Schneider et al., “Reproducibility and Scattering in Additive Manufacturing: Results from a Round Robin on PBF-LB/M AlSi10Mg Alloy,” Practical Metallography, vol. 59, no. 10, pp. 580–614, 2022, doi: 10.1515/pm-2022-1018.","ama":"Schneider M, Bettge D, Binder M, et al. Reproducibility and Scattering in Additive Manufacturing: Results from a Round Robin on PBF-LB/M AlSi10Mg Alloy. Practical Metallography. 2022;59(10):580-614. doi:10.1515/pm-2022-1018","apa":"Schneider, M., Bettge, D., Binder, M., Dollmeier, K., Dreyer, M., Hilgenberg, K., Klöden, B., Schlingmann, T., & Schmidt, J. (2022). Reproducibility and Scattering in Additive Manufacturing: Results from a Round Robin on PBF-LB/M AlSi10Mg Alloy. Practical Metallography, 59(10), 580–614. https://doi.org/10.1515/pm-2022-1018","short":"M. Schneider, D. Bettge, M. Binder, K. Dollmeier, M. Dreyer, K. Hilgenberg, B. Klöden, T. Schlingmann, J. Schmidt, Practical Metallography 59 (2022) 580–614.","mla":"Schneider, M., et al. “Reproducibility and Scattering in Additive Manufacturing: Results from a Round Robin on PBF-LB/M AlSi10Mg Alloy.” Practical Metallography, vol. 59, no. 10, Walter de Gruyter GmbH, 2022, pp. 580–614, doi:10.1515/pm-2022-1018.","bibtex":"@article{Schneider_Bettge_Binder_Dollmeier_Dreyer_Hilgenberg_Klöden_Schlingmann_Schmidt_2022, title={Reproducibility and Scattering in Additive Manufacturing: Results from a Round Robin on PBF-LB/M AlSi10Mg Alloy}, volume={59}, DOI={10.1515/pm-2022-1018}, number={10}, journal={Practical Metallography}, publisher={Walter de Gruyter GmbH}, author={Schneider, M. and Bettge, D. and Binder, M. and Dollmeier, K. and Dreyer, Malte and Hilgenberg, K. and Klöden, B. and Schlingmann, T. and Schmidt, J.}, year={2022}, pages={580–614} }"},"year":"2022","issue":"10","publication_identifier":{"issn":["2195-8599","0032-678X"]},"publication_status":"published","language":[{"iso":"eng"}],"keyword":["Metals and Alloys","Mechanics of Materials","Condensed Matter Physics","Electronic","Optical and Magnetic Materials"],"user_id":"66695","_id":"33694","status":"public","abstract":[{"text":"Abstract\r\n The round robin test investigated the reliability users can expect for AlSi10Mg additive manufactured specimens by laser powder bed fusion through examining powder quality, process parameter, microstructure defects, strength and fatigue. Besides for one outlier, expected static material properties could be found. Optical microstructure inspection was beneficial to determine true porosity and porosity types to explain the occurring scatter in properties. Fractographic analyses reveal that the fatigue crack propagation starts at the rough as-built surface for all specimens. Statistical analysis of the scatter in fatigue using statistical derived safety factors concludes that at a stress of 36.87 MPa the fatigue limit of 107 cycles could be reached for all specimen with a survival probability of 99.999 %.","lang":"eng"}],"publication":"Practical Metallography","type":"journal_article"}]