[{"year":"2022","issue":"1","title":"Calibration of 3D scan trajectories for an industrial computed tomography setup with 6-DOF object manipulator system using a single sphere","publisher":"IOP Publishing","date_created":"2022-12-07T10:46:14Z","abstract":[{"text":"In industrial x-ray computed tomography (CT), the application of more complex scan paths in comparison to the typical circular trajectory (${360}^{\\circ}$ rotation of the measurement object) can extend the potential of CT. One way to enable such 3D scan trajectories is to use a 6-degrees-of-freedom (DOF) object manipulator system. In our case, a hexapod is mounted on top of the rotary table of a commercial CT scanner. This allows for adaptive tilting of the measurement object during the scan. For high accuracy, the geometry calibration of such setups is typically done using the x-ray projections of a calibrated multi-sphere object. Contrary to this, here, we demonstrate a procedure that is based on only a single sphere and can therefore experimentally be implemented with low effort. Using the intrinsic geometry parameters of the CT device as prior information, the hexapod coordinate system with respect to the CT machine coordinate system is determined by means of a one-step optimization approach. The resulting parameters are used to calculate projection matrices that enable the volume reconstruction for 3D scan trajectories. The method is validated using simulated x-ray images and experimental investigations including dimensional measurements. For the used setup, geometric measurement results for 3D scan trajectories that are calibrated with the presented method show in sum increased errors compared to the circular scans. A limited pose accuracy of the manipulator system is discussed as a potential cause. The results nevertheless indicate that the presented method is generally feasible for dimensional CT measurements provided that the pose accuracy is sufficient. The calibration procedure can therefore be a low-cost and easier to implement alternative compared to trajectory calibration methods based on multi-sphere objects, but with a tendency towards lower measurement accuracy. The methodology can in principle be transferred to different setups with 6-DOF manipulator systems, e.g. C-arm CT devices with a robot arm.","lang":"eng"}],"publication":"Measurement Science and Technology","keyword":["Applied Mathematics","Instrumentation","Engineering (miscellaneous)"],"language":[{"iso":"eng"}],"citation":{"ieee":"L. Butzhammer, A. M. Müller, and T. Hausotte, “Calibration of 3D scan trajectories for an industrial computed tomography setup with 6-DOF object manipulator system using a single sphere,” <i>Measurement Science and Technology</i>, vol. 34, no. 1, Art. no. 015403, 2022, doi: <a href=\"https://doi.org/10.1088/1361-6501/ac9856\">10.1088/1361-6501/ac9856</a>.","chicago":"Butzhammer, Lorenz, Andreas Michael Müller, and Tino Hausotte. “Calibration of 3D Scan Trajectories for an Industrial Computed Tomography Setup with 6-DOF Object Manipulator System Using a Single Sphere.” <i>Measurement Science and Technology</i> 34, no. 1 (2022). <a href=\"https://doi.org/10.1088/1361-6501/ac9856\">https://doi.org/10.1088/1361-6501/ac9856</a>.","ama":"Butzhammer L, Müller AM, Hausotte T. Calibration of 3D scan trajectories for an industrial computed tomography setup with 6-DOF object manipulator system using a single sphere. <i>Measurement Science and Technology</i>. 2022;34(1). doi:<a href=\"https://doi.org/10.1088/1361-6501/ac9856\">10.1088/1361-6501/ac9856</a>","apa":"Butzhammer, L., Müller, A. M., &#38; Hausotte, T. (2022). Calibration of 3D scan trajectories for an industrial computed tomography setup with 6-DOF object manipulator system using a single sphere. <i>Measurement Science and Technology</i>, <i>34</i>(1), Article 015403. <a href=\"https://doi.org/10.1088/1361-6501/ac9856\">https://doi.org/10.1088/1361-6501/ac9856</a>","short":"L. Butzhammer, A.M. Müller, T. Hausotte, Measurement Science and Technology 34 (2022).","bibtex":"@article{Butzhammer_Müller_Hausotte_2022, title={Calibration of 3D scan trajectories for an industrial computed tomography setup with 6-DOF object manipulator system using a single sphere}, volume={34}, DOI={<a href=\"https://doi.org/10.1088/1361-6501/ac9856\">10.1088/1361-6501/ac9856</a>}, number={1015403}, journal={Measurement Science and Technology}, publisher={IOP Publishing}, author={Butzhammer, Lorenz and Müller, Andreas Michael and Hausotte, Tino}, year={2022} }","mla":"Butzhammer, Lorenz, et al. “Calibration of 3D Scan Trajectories for an Industrial Computed Tomography Setup with 6-DOF Object Manipulator System Using a Single Sphere.” <i>Measurement Science and Technology</i>, vol. 34, no. 1, 015403, IOP Publishing, 2022, doi:<a href=\"https://doi.org/10.1088/1361-6501/ac9856\">10.1088/1361-6501/ac9856</a>."},"intvolume":"        34","publication_status":"published","publication_identifier":{"issn":["0957-0233","1361-6501"]},"main_file_link":[{"open_access":"1","url":"https://iopscience.iop.org/article/10.1088/1361-6501/ac9856"}],"doi":"10.1088/1361-6501/ac9856","date_updated":"2023-01-13T14:34:31Z","oa":"1","author":[{"full_name":"Butzhammer, Lorenz","last_name":"Butzhammer","first_name":"Lorenz"},{"first_name":"Andreas Michael","last_name":"Müller","full_name":"Müller, Andreas Michael"},{"last_name":"Hausotte","full_name":"Hausotte, Tino","first_name":"Tino"}],"volume":34,"status":"public","type":"journal_article","article_number":"015403","project":[{"name":"TRR 285: TRR 285","_id":"130","grant_number":"418701707"},{"_id":"133","name":"TRR 285 - C: TRR 285 - Project Area C"},{"_id":"149","name":"TRR 285 – C05: TRR 285 - Subproject C05"}],"_id":"34264","user_id":"7850","department":[{"_id":"630"}]},{"type":"journal_article","publication":"Journal of Crystal Growth","status":"public","project":[{"name":"TRR 142 - A6: TRR 142 - Subproject A6","_id":"63"}],"_id":"36804","user_id":"42539","department":[{"_id":"15"},{"_id":"2"},{"_id":"292"},{"_id":"230"}],"article_number":"126756","language":[{"iso":"eng"}],"publication_status":"published","year":"2022","citation":{"apa":"Henksmeier, T., Schulz, J. F., Kluth, E., Feneberg, M., Goldhahn, R., Sanchez, A. M., Voigt, M., Grundmeier, G., &#38; Reuter, D. (2022). Remote epitaxy of In(x)Ga(1-x)As(001) on graphene covered GaAs(001) substrates. <i>Journal of Crystal Growth</i>, <i>593</i>, Article 126756. <a href=\"https://doi.org/10.1016/j.jcrysgro.2022.126756\">https://doi.org/10.1016/j.jcrysgro.2022.126756</a>","bibtex":"@article{Henksmeier_Schulz_Kluth_Feneberg_Goldhahn_Sanchez_Voigt_Grundmeier_Reuter_2022, title={Remote epitaxy of In(x)Ga(1-x)As(001) on graphene covered GaAs(001) substrates}, volume={593}, DOI={<a href=\"https://doi.org/10.1016/j.jcrysgro.2022.126756\">10.1016/j.jcrysgro.2022.126756</a>}, number={126756}, journal={Journal of Crystal Growth}, publisher={Elsevier}, author={Henksmeier, Tobias and Schulz, Johann Friedemann and Kluth, Elias and Feneberg, Martin and Goldhahn, Rüdiger and Sanchez, Ana M. and Voigt, Markus and Grundmeier, Guido and Reuter, Dirk}, year={2022} }","short":"T. Henksmeier, J.F. Schulz, E. Kluth, M. Feneberg, R. Goldhahn, A.M. Sanchez, M. Voigt, G. Grundmeier, D. Reuter, Journal of Crystal Growth 593 (2022).","mla":"Henksmeier, Tobias, et al. “Remote Epitaxy of In(x)Ga(1-x)As(001) on Graphene Covered GaAs(001) Substrates.” <i>Journal of Crystal Growth</i>, vol. 593, 126756, Elsevier, 2022, doi:<a href=\"https://doi.org/10.1016/j.jcrysgro.2022.126756\">10.1016/j.jcrysgro.2022.126756</a>.","ieee":"T. Henksmeier <i>et al.</i>, “Remote epitaxy of In(x)Ga(1-x)As(001) on graphene covered GaAs(001) substrates,” <i>Journal of Crystal Growth</i>, vol. 593, Art. no. 126756, 2022, doi: <a href=\"https://doi.org/10.1016/j.jcrysgro.2022.126756\">10.1016/j.jcrysgro.2022.126756</a>.","chicago":"Henksmeier, Tobias, Johann Friedemann Schulz, Elias Kluth, Martin Feneberg, Rüdiger Goldhahn, Ana M. Sanchez, Markus Voigt, Guido Grundmeier, and Dirk Reuter. “Remote Epitaxy of In(x)Ga(1-x)As(001) on Graphene Covered GaAs(001) Substrates.” <i>Journal of Crystal Growth</i> 593 (2022). <a href=\"https://doi.org/10.1016/j.jcrysgro.2022.126756\">https://doi.org/10.1016/j.jcrysgro.2022.126756</a>.","ama":"Henksmeier T, Schulz JF, Kluth E, et al. Remote epitaxy of In(x)Ga(1-x)As(001) on graphene covered GaAs(001) substrates. <i>Journal of Crystal Growth</i>. 2022;593. doi:<a href=\"https://doi.org/10.1016/j.jcrysgro.2022.126756\">10.1016/j.jcrysgro.2022.126756</a>"},"intvolume":"       593","publisher":"Elsevier","date_updated":"2023-01-13T16:02:06Z","date_created":"2023-01-13T15:40:17Z","author":[{"first_name":"Tobias","id":"42539","full_name":"Henksmeier, Tobias","last_name":"Henksmeier"},{"full_name":"Schulz, Johann Friedemann","last_name":"Schulz","first_name":"Johann Friedemann"},{"last_name":"Kluth","full_name":"Kluth, Elias","first_name":"Elias"},{"last_name":"Feneberg","full_name":"Feneberg, Martin","first_name":"Martin"},{"last_name":"Goldhahn","full_name":"Goldhahn, Rüdiger","first_name":"Rüdiger"},{"last_name":"Sanchez","full_name":"Sanchez, Ana M.","first_name":"Ana M."},{"first_name":"Markus","id":"15182","full_name":"Voigt, Markus","last_name":"Voigt"},{"last_name":"Grundmeier","id":"194","full_name":"Grundmeier, Guido","first_name":"Guido"},{"full_name":"Reuter, Dirk","id":"37763","last_name":"Reuter","first_name":"Dirk"}],"volume":593,"title":"Remote epitaxy of In(x)Ga(1-x)As(001) on graphene covered GaAs(001) substrates","doi":"10.1016/j.jcrysgro.2022.126756"},{"citation":{"short":"V. Churavy, W.F. Godoy, C. Bauer, H. Ranocha, M. Schlottke-Lakemper, L. Räss, J. Blaschke, M. Giordano, E. Schnetter, S. Omlin, J.S. Vetter, A. Edelman, (2022).","mla":"Churavy, Valentin, et al. <i>Bridging HPC Communities through the Julia Programming Language</i>. 2022.","bibtex":"@article{Churavy_Godoy_Bauer_Ranocha_Schlottke-Lakemper_Räss_Blaschke_Giordano_Schnetter_Omlin_et al._2022, title={Bridging HPC Communities through the Julia Programming Language}, author={Churavy, Valentin and Godoy, William F and Bauer, Carsten and Ranocha, Hendrik and Schlottke-Lakemper, Michael and Räss, Ludovic and Blaschke, Johannes and Giordano, Mosè and Schnetter, Erik and Omlin, Samuel and et al.}, year={2022} }","apa":"Churavy, V., Godoy, W. F., Bauer, C., Ranocha, H., Schlottke-Lakemper, M., Räss, L., Blaschke, J., Giordano, M., Schnetter, E., Omlin, S., Vetter, J. S., &#38; Edelman, A. (2022). <i>Bridging HPC Communities through the Julia Programming Language</i>.","ama":"Churavy V, Godoy WF, Bauer C, et al. Bridging HPC Communities through the Julia Programming Language. Published online 2022.","ieee":"V. Churavy <i>et al.</i>, “Bridging HPC Communities through the Julia Programming Language.” 2022.","chicago":"Churavy, Valentin, William F Godoy, Carsten Bauer, Hendrik Ranocha, Michael Schlottke-Lakemper, Ludovic Räss, Johannes Blaschke, et al. “Bridging HPC Communities through the Julia Programming Language,” 2022."},"status":"public","year":"2022","abstract":[{"text":"The Julia programming language has evolved into a modern alternative to fill existing gaps in scientific computing and data science applications. Julia leverages a unified and coordinated single-language and ecosystem paradigm and has a proven track record of achieving high performance without sacrificing user productivity. These aspects make Julia a viable alternative to high-performance computing's (HPC's) existing and increasingly costly many-body workflow composition strategy in which traditional HPC languages (e.g., Fortran, C, C++) are used for simulations, and higher-level languages (e.g., Python, R, MATLAB) are used for data analysis and interactive computing. Julia's rapid growth in language capabilities, package ecosystem, and community make it a promising universal language for HPC. This paper presents the views of a multidisciplinary group of researchers from academia, government, and industry that advocate for an HPC software development paradigm that emphasizes developer productivity, workflow portability, and low barriers for entry. We believe that the Julia programming language, its ecosystem, and its community provide modern and powerful capabilities that enable this group's objectives. Crucially, we believe that Julia can provide a feasible and less costly approach to programming scientific applications and workflows that target HPC facilities. In this work, we examine the current practice and role of Julia as a common, end-to-end programming model to address major challenges in scientific reproducibility, data-driven AI/machine learning, co-design and workflows, scalability and performance portability in heterogeneous computing, network communication, data management, and community education. As a result, the diversification of current investments to fulfill the needs of the upcoming decade is crucial as more supercomputing centers prepare for the exascale era.","lang":"eng"}],"type":"preprint","main_file_link":[{"open_access":"1","url":"https://arxiv.org/abs/2211.02740"}],"language":[{"iso":"eng"}],"title":"Bridging HPC Communities through the Julia Programming Language","user_id":"90082","date_created":"2023-01-16T09:10:48Z","author":[{"first_name":"Valentin","full_name":"Churavy, Valentin","last_name":"Churavy"},{"first_name":"William F","last_name":"Godoy","full_name":"Godoy, William F"},{"first_name":"Carsten","last_name":"Bauer","id":"90082","full_name":"Bauer, Carsten"},{"full_name":"Ranocha, Hendrik","last_name":"Ranocha","first_name":"Hendrik"},{"full_name":"Schlottke-Lakemper, Michael","last_name":"Schlottke-Lakemper","first_name":"Michael"},{"last_name":"Räss","full_name":"Räss, Ludovic","first_name":"Ludovic"},{"full_name":"Blaschke, Johannes","last_name":"Blaschke","first_name":"Johannes"},{"first_name":"Mosè","last_name":"Giordano","full_name":"Giordano, Mosè"},{"first_name":"Erik","last_name":"Schnetter","full_name":"Schnetter, Erik"},{"full_name":"Omlin, Samuel","last_name":"Omlin","first_name":"Samuel"},{"first_name":"Jeffrey S","full_name":"Vetter, Jeffrey S","last_name":"Vetter"},{"first_name":"Alan","full_name":"Edelman, Alan","last_name":"Edelman"}],"department":[{"_id":"27"}],"date_updated":"2023-01-16T09:16:20Z","oa":"1","_id":"36879"},{"language":[{"iso":"eng"}],"keyword":["Applied Mathematics","Control and Optimization","General Medicine"],"user_id":"95394","_id":"35206","status":"public","publication":"Mathematical Control and Related Fields","type":"journal_article","doi":"10.3934/mcrf.2022052","title":"Accessibility properties of abnormal geodesics in optimal control illustrated by two case studies","volume":"0","author":[{"first_name":"Bernard","last_name":"Bonnard","full_name":"Bonnard, Bernard"},{"full_name":"Rouot, Jérémy","last_name":"Rouot","first_name":"Jérémy"},{"full_name":"Wembe Moafo, Boris Edgar","id":"95394","last_name":"Wembe Moafo","first_name":"Boris Edgar"}],"date_created":"2023-01-04T10:26:56Z","publisher":"American Institute of Mathematical Sciences (AIMS)","date_updated":"2023-01-16T12:07:51Z","page":"0-0","citation":{"apa":"Bonnard, B., Rouot, J., &#38; Wembe Moafo, B. E. (2022). Accessibility properties of abnormal geodesics in optimal control illustrated by two case studies. <i>Mathematical Control and Related Fields</i>, <i>0</i>(0), 0–0. <a href=\"https://doi.org/10.3934/mcrf.2022052\">https://doi.org/10.3934/mcrf.2022052</a>","ama":"Bonnard B, Rouot J, Wembe Moafo BE. Accessibility properties of abnormal geodesics in optimal control illustrated by two case studies. <i>Mathematical Control and Related Fields</i>. 2022;0(0):0-0. doi:<a href=\"https://doi.org/10.3934/mcrf.2022052\">10.3934/mcrf.2022052</a>","short":"B. Bonnard, J. Rouot, B.E. Wembe Moafo, Mathematical Control and Related Fields 0 (2022) 0–0.","bibtex":"@article{Bonnard_Rouot_Wembe Moafo_2022, title={Accessibility properties of abnormal geodesics in optimal control illustrated by two case studies}, volume={0}, DOI={<a href=\"https://doi.org/10.3934/mcrf.2022052\">10.3934/mcrf.2022052</a>}, number={0}, journal={Mathematical Control and Related Fields}, publisher={American Institute of Mathematical Sciences (AIMS)}, author={Bonnard, Bernard and Rouot, Jérémy and Wembe Moafo, Boris Edgar}, year={2022}, pages={0–0} }","mla":"Bonnard, Bernard, et al. “Accessibility Properties of Abnormal Geodesics in Optimal Control Illustrated by Two Case Studies.” <i>Mathematical Control and Related Fields</i>, vol. 0, no. 0, American Institute of Mathematical Sciences (AIMS), 2022, pp. 0–0, doi:<a href=\"https://doi.org/10.3934/mcrf.2022052\">10.3934/mcrf.2022052</a>.","ieee":"B. Bonnard, J. Rouot, and B. E. Wembe Moafo, “Accessibility properties of abnormal geodesics in optimal control illustrated by two case studies,” <i>Mathematical Control and Related Fields</i>, vol. 0, no. 0, pp. 0–0, 2022, doi: <a href=\"https://doi.org/10.3934/mcrf.2022052\">10.3934/mcrf.2022052</a>.","chicago":"Bonnard, Bernard, Jérémy Rouot, and Boris Edgar Wembe Moafo. “Accessibility Properties of Abnormal Geodesics in Optimal Control Illustrated by Two Case Studies.” <i>Mathematical Control and Related Fields</i> 0, no. 0 (2022): 0–0. <a href=\"https://doi.org/10.3934/mcrf.2022052\">https://doi.org/10.3934/mcrf.2022052</a>."},"year":"2022","issue":"0","publication_identifier":{"issn":["2156-8472","2156-8499"]},"publication_status":"published"},{"type":"journal_article","publication":"Systems &amp; Control Letters","status":"public","user_id":"95394","_id":"33869","language":[{"iso":"eng"}],"article_number":"105140","keyword":["Electrical and Electronic Engineering","Mechanical Engineering","General Computer Science","Control and Systems Engineering"],"publication_status":"published","publication_identifier":{"issn":["0167-6911"]},"citation":{"mla":"Bonnard, B., et al. “Abnormal Geodesics in 2D-Zermelo Navigation Problems in the Case of Revolution and the Fan Shape of the Small Time Balls.” <i>Systems &#38;amp; Control Letters</i>, vol. 161, 105140, Elsevier BV, 2022, doi:<a href=\"https://doi.org/10.1016/j.sysconle.2022.105140\">10.1016/j.sysconle.2022.105140</a>.","short":"B. Bonnard, O. Cots, J. Gergaud, B.E. Wembe Moafo, Systems &#38;amp; Control Letters 161 (2022).","bibtex":"@article{Bonnard_Cots_Gergaud_Wembe Moafo_2022, title={Abnormal geodesics in 2D-Zermelo navigation problems in the case of revolution and the fan shape of the small time balls}, volume={161}, DOI={<a href=\"https://doi.org/10.1016/j.sysconle.2022.105140\">10.1016/j.sysconle.2022.105140</a>}, number={105140}, journal={Systems &#38;amp; Control Letters}, publisher={Elsevier BV}, author={Bonnard, B. and Cots, O. and Gergaud, J. and Wembe Moafo, Boris Edgar}, year={2022} }","apa":"Bonnard, B., Cots, O., Gergaud, J., &#38; Wembe Moafo, B. E. (2022). Abnormal geodesics in 2D-Zermelo navigation problems in the case of revolution and the fan shape of the small time balls. <i>Systems &#38;amp; Control Letters</i>, <i>161</i>, Article 105140. <a href=\"https://doi.org/10.1016/j.sysconle.2022.105140\">https://doi.org/10.1016/j.sysconle.2022.105140</a>","ieee":"B. Bonnard, O. Cots, J. Gergaud, and B. E. Wembe Moafo, “Abnormal geodesics in 2D-Zermelo navigation problems in the case of revolution and the fan shape of the small time balls,” <i>Systems &#38;amp; Control Letters</i>, vol. 161, Art. no. 105140, 2022, doi: <a href=\"https://doi.org/10.1016/j.sysconle.2022.105140\">10.1016/j.sysconle.2022.105140</a>.","chicago":"Bonnard, B., O. Cots, J. Gergaud, and Boris Edgar Wembe Moafo. “Abnormal Geodesics in 2D-Zermelo Navigation Problems in the Case of Revolution and the Fan Shape of the Small Time Balls.” <i>Systems &#38;amp; Control Letters</i> 161 (2022). <a href=\"https://doi.org/10.1016/j.sysconle.2022.105140\">https://doi.org/10.1016/j.sysconle.2022.105140</a>.","ama":"Bonnard B, Cots O, Gergaud J, Wembe Moafo BE. Abnormal geodesics in 2D-Zermelo navigation problems in the case of revolution and the fan shape of the small time balls. <i>Systems &#38;amp; Control Letters</i>. 2022;161. doi:<a href=\"https://doi.org/10.1016/j.sysconle.2022.105140\">10.1016/j.sysconle.2022.105140</a>"},"intvolume":"       161","year":"2022","date_created":"2022-10-24T12:54:24Z","author":[{"last_name":"Bonnard","full_name":"Bonnard, B.","first_name":"B."},{"first_name":"O.","full_name":"Cots, O.","last_name":"Cots"},{"last_name":"Gergaud","full_name":"Gergaud, J.","first_name":"J."},{"last_name":"Wembe Moafo","id":"95394","full_name":"Wembe Moafo, Boris Edgar","first_name":"Boris Edgar"}],"volume":161,"date_updated":"2023-01-16T12:08:58Z","publisher":"Elsevier BV","doi":"10.1016/j.sysconle.2022.105140","title":"Abnormal geodesics in 2D-Zermelo navigation problems in the case of revolution and the fan shape of the small time balls"},{"language":[{"iso":"eng"}],"_id":"36938","user_id":"41584","status":"public","type":"conference_abstract","title":"Frontal theta power increases during table tennis play – indications for neurophysiological demands during open-skill sports?","conference":{"location":"La Jolla","name":"4th International Mobile Brain/Body Imaging Conference"},"date_updated":"2023-01-16T13:05:35Z","date_created":"2023-01-16T13:01:06Z","author":[{"first_name":"Daniel","full_name":"Büchel, Daniel","last_name":"Büchel"},{"full_name":"Visser, Anton","last_name":"Visser","first_name":"Anton"},{"first_name":"Tim","last_name":"Lehmann","full_name":"Lehmann, Tim","id":"41584"},{"last_name":"Baumeister","full_name":"Baumeister, Jochen","first_name":"Jochen"}],"year":"2022","citation":{"mla":"Büchel, Daniel, et al. <i>Frontal Theta Power Increases during Table Tennis Play – Indications for Neurophysiological Demands during Open-Skill Sports?</i> 2022.","bibtex":"@inproceedings{Büchel_Visser_Lehmann_Baumeister_2022, title={Frontal theta power increases during table tennis play – indications for neurophysiological demands during open-skill sports?}, author={Büchel, Daniel and Visser, Anton and Lehmann, Tim and Baumeister, Jochen}, year={2022} }","short":"D. Büchel, A. Visser, T. Lehmann, J. Baumeister, in: 2022.","apa":"Büchel, D., Visser, A., Lehmann, T., &#38; Baumeister, J. (2022). <i>Frontal theta power increases during table tennis play – indications for neurophysiological demands during open-skill sports?</i> 4th International Mobile Brain/Body Imaging Conference, La Jolla.","ama":"Büchel D, Visser A, Lehmann T, Baumeister J. Frontal theta power increases during table tennis play – indications for neurophysiological demands during open-skill sports? In: ; 2022.","ieee":"D. Büchel, A. Visser, T. Lehmann, and J. Baumeister, “Frontal theta power increases during table tennis play – indications for neurophysiological demands during open-skill sports?,” presented at the 4th International Mobile Brain/Body Imaging Conference, La Jolla, 2022.","chicago":"Büchel, Daniel, Anton Visser, Tim Lehmann, and Jochen Baumeister. “Frontal Theta Power Increases during Table Tennis Play – Indications for Neurophysiological Demands during Open-Skill Sports?,” 2022."}},{"date_updated":"2023-01-16T13:19:11Z","publisher":"Medicine and Science in Sports and Exercise","volume":54,"author":[{"first_name":"Tim","last_name":"Lehmann","full_name":"Lehmann, Tim"},{"first_name":"Anton","last_name":"Visser","full_name":"Visser, Anton"},{"full_name":"Havers, Tim","last_name":"Havers","first_name":"Tim"},{"first_name":"Daniel","last_name":"Büchel","full_name":"Büchel, Daniel"},{"last_name":"Baumeister","full_name":"Baumeister, Jochen","first_name":"Jochen"}],"date_created":"2023-01-16T12:55:45Z","title":"Surface Instability Modulates Cortical Information Processing In Multi-Joint Compound Movements","conference":{"name":"ACSM’s 69th annual meeting","location":"San Diego"},"doi":"10.1249/01.mss.0000882152.12078.64","publication_identifier":{"issn":["1530-0315","0195-9131"]},"publication_status":"published","issue":"9S","year":"2022","intvolume":"        54","page":"565-565","citation":{"apa":"Lehmann, T., Visser, A., Havers, T., Büchel, D., &#38; Baumeister, J. (2022). <i>Surface Instability Modulates Cortical Information Processing In Multi-Joint Compound Movements</i>. <i>54</i>(9S), 565–565. <a href=\"https://doi.org/10.1249/01.mss.0000882152.12078.64\">https://doi.org/10.1249/01.mss.0000882152.12078.64</a>","bibtex":"@inproceedings{Lehmann_Visser_Havers_Büchel_Baumeister_2022, title={Surface Instability Modulates Cortical Information Processing In Multi-Joint Compound Movements}, volume={54}, DOI={<a href=\"https://doi.org/10.1249/01.mss.0000882152.12078.64\">10.1249/01.mss.0000882152.12078.64</a>}, number={9S}, publisher={Medicine and Science in Sports and Exercise}, author={Lehmann, Tim and Visser, Anton and Havers, Tim and Büchel, Daniel and Baumeister, Jochen}, year={2022}, pages={565–565} }","mla":"Lehmann, Tim, et al. <i>Surface Instability Modulates Cortical Information Processing In Multi-Joint Compound Movements</i>. no. 9S, Medicine and Science in Sports and Exercise, 2022, pp. 565–565, doi:<a href=\"https://doi.org/10.1249/01.mss.0000882152.12078.64\">10.1249/01.mss.0000882152.12078.64</a>.","short":"T. Lehmann, A. Visser, T. Havers, D. Büchel, J. Baumeister, in: Medicine and Science in Sports and Exercise, 2022, pp. 565–565.","ieee":"T. Lehmann, A. Visser, T. Havers, D. Büchel, and J. Baumeister, “Surface Instability Modulates Cortical Information Processing In Multi-Joint Compound Movements,” San Diego, 2022, vol. 54, no. 9S, pp. 565–565, doi: <a href=\"https://doi.org/10.1249/01.mss.0000882152.12078.64\">10.1249/01.mss.0000882152.12078.64</a>.","chicago":"Lehmann, Tim, Anton Visser, Tim Havers, Daniel Büchel, and Jochen Baumeister. “Surface Instability Modulates Cortical Information Processing In Multi-Joint Compound Movements,” 54:565–565. Medicine and Science in Sports and Exercise, 2022. <a href=\"https://doi.org/10.1249/01.mss.0000882152.12078.64\">https://doi.org/10.1249/01.mss.0000882152.12078.64</a>.","ama":"Lehmann T, Visser A, Havers T, Büchel D, Baumeister J. Surface Instability Modulates Cortical Information Processing In Multi-Joint Compound Movements. In: Vol 54. Medicine and Science in Sports and Exercise; 2022:565-565. doi:<a href=\"https://doi.org/10.1249/01.mss.0000882152.12078.64\">10.1249/01.mss.0000882152.12078.64</a>"},"_id":"36937","department":[{"_id":"172"}],"user_id":"41584","language":[{"iso":"eng"}],"type":"conference_abstract","status":"public"},{"author":[{"last_name":"Constantiou","full_name":"Constantiou, Ioanna","first_name":"Ioanna"},{"first_name":"Alivelu","full_name":"Mukkamala, Alivelu","last_name":"Mukkamala"},{"full_name":"Sjöklint, Mimmi","last_name":"Sjöklint","first_name":"Mimmi"},{"id":"72744","full_name":"Trier, Matthias","last_name":"Trier","first_name":"Matthias"}],"date_created":"2023-01-16T15:01:00Z","publisher":"Informa UK Limited","date_updated":"2023-01-16T15:03:54Z","doi":"10.1080/0960085x.2022.2081096","title":"Engaging with self-tracking applications: how do users respond to their performance data?","publication_identifier":{"issn":["0960-085X","1476-9344"]},"publication_status":"published","page":"1-21","citation":{"ieee":"I. Constantiou, A. Mukkamala, M. Sjöklint, and M. Trier, “Engaging with self-tracking applications: how do users respond to their performance data?,” <i>European Journal of Information Systems</i>, pp. 1–21, 2022, doi: <a href=\"https://doi.org/10.1080/0960085x.2022.2081096\">10.1080/0960085x.2022.2081096</a>.","chicago":"Constantiou, Ioanna, Alivelu Mukkamala, Mimmi Sjöklint, and Matthias Trier. “Engaging with Self-Tracking Applications: How Do Users Respond to Their Performance Data?” <i>European Journal of Information Systems</i>, 2022, 1–21. <a href=\"https://doi.org/10.1080/0960085x.2022.2081096\">https://doi.org/10.1080/0960085x.2022.2081096</a>.","ama":"Constantiou I, Mukkamala A, Sjöklint M, Trier M. Engaging with self-tracking applications: how do users respond to their performance data? <i>European Journal of Information Systems</i>. Published online 2022:1-21. doi:<a href=\"https://doi.org/10.1080/0960085x.2022.2081096\">10.1080/0960085x.2022.2081096</a>","apa":"Constantiou, I., Mukkamala, A., Sjöklint, M., &#38; Trier, M. (2022). Engaging with self-tracking applications: how do users respond to their performance data? <i>European Journal of Information Systems</i>, 1–21. <a href=\"https://doi.org/10.1080/0960085x.2022.2081096\">https://doi.org/10.1080/0960085x.2022.2081096</a>","bibtex":"@article{Constantiou_Mukkamala_Sjöklint_Trier_2022, title={Engaging with self-tracking applications: how do users respond to their performance data?}, DOI={<a href=\"https://doi.org/10.1080/0960085x.2022.2081096\">10.1080/0960085x.2022.2081096</a>}, journal={European Journal of Information Systems}, publisher={Informa UK Limited}, author={Constantiou, Ioanna and Mukkamala, Alivelu and Sjöklint, Mimmi and Trier, Matthias}, year={2022}, pages={1–21} }","mla":"Constantiou, Ioanna, et al. “Engaging with Self-Tracking Applications: How Do Users Respond to Their Performance Data?” <i>European Journal of Information Systems</i>, Informa UK Limited, 2022, pp. 1–21, doi:<a href=\"https://doi.org/10.1080/0960085x.2022.2081096\">10.1080/0960085x.2022.2081096</a>.","short":"I. Constantiou, A. Mukkamala, M. Sjöklint, M. Trier, European Journal of Information Systems (2022) 1–21."},"year":"2022","department":[{"_id":"198"}],"user_id":"21671","_id":"36961","language":[{"iso":"eng"}],"keyword":["Library and Information Sciences","Information Systems"],"publication":"European Journal of Information Systems","type":"journal_article","status":"public"},{"year":"2022","citation":{"short":"M. Neukötter, S. Jesinghausen, H.-J. Schmid, Rheologica Acta (2022).","mla":"Neukötter, Moritz, et al. “Model Droplet Formation in Extensional Filament Stretching within a Filament Extension Atomizer.” <i>Rheologica Acta</i>, Springer Science and Business Media LLC, 2022, doi:<a href=\"https://doi.org/10.1007/s00397-022-01339-y\">10.1007/s00397-022-01339-y</a>.","bibtex":"@article{Neukötter_Jesinghausen_Schmid_2022, title={Model droplet formation in extensional filament stretching within a Filament Extension Atomizer}, DOI={<a href=\"https://doi.org/10.1007/s00397-022-01339-y\">10.1007/s00397-022-01339-y</a>}, journal={Rheologica Acta}, publisher={Springer Science and Business Media LLC}, author={Neukötter, Moritz and Jesinghausen, Steffen and Schmid, Hans-Joachim}, year={2022} }","apa":"Neukötter, M., Jesinghausen, S., &#38; Schmid, H.-J. (2022). Model droplet formation in extensional filament stretching within a Filament Extension Atomizer. <i>Rheologica Acta</i>. <a href=\"https://doi.org/10.1007/s00397-022-01339-y\">https://doi.org/10.1007/s00397-022-01339-y</a>","ieee":"M. Neukötter, S. Jesinghausen, and H.-J. Schmid, “Model droplet formation in extensional filament stretching within a Filament Extension Atomizer,” <i>Rheologica Acta</i>, 2022, doi: <a href=\"https://doi.org/10.1007/s00397-022-01339-y\">10.1007/s00397-022-01339-y</a>.","chicago":"Neukötter, Moritz, Steffen Jesinghausen, and Hans-Joachim Schmid. “Model Droplet Formation in Extensional Filament Stretching within a Filament Extension Atomizer.” <i>Rheologica Acta</i>, 2022. <a href=\"https://doi.org/10.1007/s00397-022-01339-y\">https://doi.org/10.1007/s00397-022-01339-y</a>.","ama":"Neukötter M, Jesinghausen S, Schmid H-J. Model droplet formation in extensional filament stretching within a Filament Extension Atomizer. <i>Rheologica Acta</i>. Published online 2022. doi:<a href=\"https://doi.org/10.1007/s00397-022-01339-y\">10.1007/s00397-022-01339-y</a>"},"quality_controlled":"1","publication_identifier":{"issn":["0035-4511","1435-1528"]},"publication_status":"published","title":"Model droplet formation in extensional filament stretching within a Filament Extension Atomizer","doi":"10.1007/s00397-022-01339-y","main_file_link":[{"url":"https://link.springer.com/article/10.1007/s00397-022-01339-y","open_access":"1"}],"date_updated":"2023-01-17T07:35:20Z","oa":"1","publisher":"Springer Science and Business Media LLC","author":[{"first_name":"Moritz","id":"45530","full_name":"Neukötter, Moritz","last_name":"Neukötter","orcid":"0000-0001-9101-8828"},{"first_name":"Steffen","id":"3959","full_name":"Jesinghausen, Steffen","last_name":"Jesinghausen","orcid":"https://orcid.org/0000-0003-2611-5298"},{"full_name":"Schmid, Hans-Joachim","id":"464","last_name":"Schmid","first_name":"Hans-Joachim"}],"date_created":"2022-05-03T08:12:21Z","abstract":[{"text":"<jats:title>Abstract</jats:title><jats:p>Further innovation in the field of selective laser sintering (SLS) is strongly connected to the availability of new materials since the market is dominated by polyamide 12 (&gt;90%). The aim of this publication is to develop a descriptive model for the droplet formation process in a Filament Extension Atomizer to predict the applicability to exploit further polymers for the SLS process. The feasibility was tested, investigated and characterized using a “Dripping out of a nozzle” setup for uniaxial extension. The droplet formation process was then observed via high-speed camera imaging and classified for certain parameters. The experiments were carried out using semi-diluted polyethylene oxide (600–4000 kg/mol), glycerol and water solutions as model fluids. Driven by the Plateau-Rayleigh instability, different types of spherical droplets were observed and various droplet formation mechanisms demonstrated and analyzed. Based on the experimental results, a predictive model is derived to describe various essential parameters.</jats:p>","lang":"eng"}],"status":"public","publication":"Rheologica Acta","type":"journal_article","keyword":["Rheology","SLS","Lasersintering","exensional rheology"],"article_type":"original","language":[{"iso":"eng"}],"_id":"31035","department":[{"_id":"150"}],"user_id":"3959"},{"extern":"1","user_id":"14931","department":[{"_id":"9"},{"_id":"728"}],"_id":"36815","status":"public","type":"journal_article","doi":"10.3389/fenrg.2022.859112","author":[{"full_name":"Shaqiri, S.","last_name":"Shaqiri","first_name":"S."},{"first_name":"D.","full_name":"Kaczmarek, D.","last_name":"Kaczmarek"},{"first_name":"F.","full_name":"vom Lehn, F.","last_name":"vom Lehn"},{"full_name":"Beeckmann, J.","last_name":"Beeckmann","first_name":"J."},{"full_name":"Pitsch, H.","last_name":"Pitsch","first_name":"H."},{"first_name":"Tina","last_name":"Kasper","orcid":"0000-0003-3993-5316 ","full_name":"Kasper, Tina","id":"94562"}],"volume":10,"date_updated":"2023-01-17T08:26:06Z","citation":{"ama":"Shaqiri S, Kaczmarek D, vom Lehn F, Beeckmann J, Pitsch H, Kasper T. Experimental Investigation of the Pressure Dependence of Iso-Octane Combustion. <i>Frontiers in Energy Research</i>. 2022;10. doi:<a href=\"https://doi.org/10.3389/fenrg.2022.859112\">10.3389/fenrg.2022.859112</a>","ieee":"S. Shaqiri, D. Kaczmarek, F. vom Lehn, J. Beeckmann, H. Pitsch, and T. Kasper, “Experimental Investigation of the Pressure Dependence of Iso-Octane Combustion,” <i>Frontiers in Energy Research</i>, vol. 10, 2022, doi: <a href=\"https://doi.org/10.3389/fenrg.2022.859112\">10.3389/fenrg.2022.859112</a>.","chicago":"Shaqiri, S., D. Kaczmarek, F. vom Lehn, J. Beeckmann, H. Pitsch, and Tina Kasper. “Experimental Investigation of the Pressure Dependence of Iso-Octane Combustion.” <i>Frontiers in Energy Research</i> 10 (2022). <a href=\"https://doi.org/10.3389/fenrg.2022.859112\">https://doi.org/10.3389/fenrg.2022.859112</a>.","apa":"Shaqiri, S., Kaczmarek, D., vom Lehn, F., Beeckmann, J., Pitsch, H., &#38; Kasper, T. (2022). Experimental Investigation of the Pressure Dependence of Iso-Octane Combustion. <i>Frontiers in Energy Research</i>, <i>10</i>. <a href=\"https://doi.org/10.3389/fenrg.2022.859112\">https://doi.org/10.3389/fenrg.2022.859112</a>","bibtex":"@article{Shaqiri_Kaczmarek_vom Lehn_Beeckmann_Pitsch_Kasper_2022, title={Experimental Investigation of the Pressure Dependence of Iso-Octane Combustion}, volume={10}, DOI={<a href=\"https://doi.org/10.3389/fenrg.2022.859112\">10.3389/fenrg.2022.859112</a>}, journal={Frontiers in Energy Research}, publisher={Frontiers Media SA}, author={Shaqiri, S. and Kaczmarek, D. and vom Lehn, F. and Beeckmann, J. and Pitsch, H. and Kasper, Tina}, year={2022} }","short":"S. Shaqiri, D. Kaczmarek, F. vom Lehn, J. Beeckmann, H. Pitsch, T. Kasper, Frontiers in Energy Research 10 (2022).","mla":"Shaqiri, S., et al. “Experimental Investigation of the Pressure Dependence of Iso-Octane Combustion.” <i>Frontiers in Energy Research</i>, vol. 10, Frontiers Media SA, 2022, doi:<a href=\"https://doi.org/10.3389/fenrg.2022.859112\">10.3389/fenrg.2022.859112</a>."},"intvolume":"        10","publication_status":"published","publication_identifier":{"issn":["2296-598X"]},"language":[{"iso":"eng"}],"keyword":["Economics and Econometrics","Energy Engineering and Power Technology","Fuel Technology","Renewable Energy","Sustainability and the Environment"],"abstract":[{"text":"<jats:p>Iso-octane is frequently used as a surrogate fuel or as a component in primary reference fuel blends when low-temperature combustion strategies in engines are investigated. To develop control strategies for these engines, the reaction kinetics of iso-octane must be known starting from the low temperatures and intermediate pressures before ignition to the high temperatures and pressures of combustion. This work adds new experimental data sets to the validation data for reaction mechanism development by investigating the oxidation of iso-octane in stoichiometric mixtures in a flow reactor at pressures of <jats:italic>p</jats:italic> = 1, 10, and 20 bar and 473K ≤ T ≤ 973 K. The experimental data are compared to simulations with recent reaction mechanisms [Atef et al., Combustion and Flame 178, (2017), Bagheri et al., Combustion and Flame 212, (2020), Cai et al., Proceedings of the Combustion Institute 37, (2018), Fang et al., Combustion and Flame 214, (2020)]. The comparison between experimental and simulated mole fractions as function of temperature show reasonable agreement for all investigated pressures. In particular, the experimentally observed onset of low-temperature reactivity above a certain pressure, the shift of the negative temperature coefficient (NTC) regime with increasing pressure to higher temperatures, and the acceleration of the high-temperature chemistry are captured well in the simulations. Deviations between experimental and simulated results are discussed in detail for the reactivity of iso-octane and some key intermediates such as 2,2,4,4-tetramethyl-tetrahydrofuran, iso-butene and acetone at low temperatures.</jats:p>","lang":"eng"}],"publication":"Frontiers in Energy Research","title":"Experimental Investigation of the Pressure Dependence of Iso-Octane Combustion","date_created":"2023-01-13T16:30:12Z","publisher":"Frontiers Media SA","year":"2022"},{"status":"public","publication":"Combustion and Flame","type":"journal_article","keyword":["General Physics and Astronomy","Energy Engineering and Power Technology","Fuel Technology","General Chemical Engineering","General Chemistry"],"article_number":"112096","extern":"1","language":[{"iso":"eng"}],"_id":"36817","department":[{"_id":"9"},{"_id":"728"}],"user_id":"14931","year":"2022","intvolume":"       243","citation":{"apa":"Hoener, M., &#38; Kasper, T. (2022). Nitrous acid in high-pressure oxidation of CH4 doped with nitric oxide: Challenges in the isomer-selective detection and quantification of an elusive intermediate. <i>Combustion and Flame</i>, <i>243</i>, Article 112096. <a href=\"https://doi.org/10.1016/j.combustflame.2022.112096\">https://doi.org/10.1016/j.combustflame.2022.112096</a>","bibtex":"@article{Hoener_Kasper_2022, title={Nitrous acid in high-pressure oxidation of CH4 doped with nitric oxide: Challenges in the isomer-selective detection and quantification of an elusive intermediate}, volume={243}, DOI={<a href=\"https://doi.org/10.1016/j.combustflame.2022.112096\">10.1016/j.combustflame.2022.112096</a>}, number={112096}, journal={Combustion and Flame}, publisher={Elsevier BV}, author={Hoener, Martin and Kasper, Tina}, year={2022} }","short":"M. Hoener, T. Kasper, Combustion and Flame 243 (2022).","mla":"Hoener, Martin, and Tina Kasper. “Nitrous Acid in High-Pressure Oxidation of CH4 Doped with Nitric Oxide: Challenges in the Isomer-Selective Detection and Quantification of an Elusive Intermediate.” <i>Combustion and Flame</i>, vol. 243, 112096, Elsevier BV, 2022, doi:<a href=\"https://doi.org/10.1016/j.combustflame.2022.112096\">10.1016/j.combustflame.2022.112096</a>.","chicago":"Hoener, Martin, and Tina Kasper. “Nitrous Acid in High-Pressure Oxidation of CH4 Doped with Nitric Oxide: Challenges in the Isomer-Selective Detection and Quantification of an Elusive Intermediate.” <i>Combustion and Flame</i> 243 (2022). <a href=\"https://doi.org/10.1016/j.combustflame.2022.112096\">https://doi.org/10.1016/j.combustflame.2022.112096</a>.","ieee":"M. Hoener and T. Kasper, “Nitrous acid in high-pressure oxidation of CH4 doped with nitric oxide: Challenges in the isomer-selective detection and quantification of an elusive intermediate,” <i>Combustion and Flame</i>, vol. 243, Art. no. 112096, 2022, doi: <a href=\"https://doi.org/10.1016/j.combustflame.2022.112096\">10.1016/j.combustflame.2022.112096</a>.","ama":"Hoener M, Kasper T. Nitrous acid in high-pressure oxidation of CH4 doped with nitric oxide: Challenges in the isomer-selective detection and quantification of an elusive intermediate. <i>Combustion and Flame</i>. 2022;243. doi:<a href=\"https://doi.org/10.1016/j.combustflame.2022.112096\">10.1016/j.combustflame.2022.112096</a>"},"publication_identifier":{"issn":["0010-2180"]},"publication_status":"published","title":"Nitrous acid in high-pressure oxidation of CH4 doped with nitric oxide: Challenges in the isomer-selective detection and quantification of an elusive intermediate","doi":"10.1016/j.combustflame.2022.112096","date_updated":"2023-01-17T08:26:28Z","publisher":"Elsevier BV","volume":243,"date_created":"2023-01-13T16:31:23Z","author":[{"first_name":"Martin","full_name":"Hoener, Martin","last_name":"Hoener"},{"last_name":"Kasper","orcid":"0000-0003-3993-5316 ","id":"94562","full_name":"Kasper, Tina","first_name":"Tina"}]},{"language":[{"iso":"eng"}],"keyword":["Physical and Theoretical Chemistry","Mechanical Engineering","General Chemical Engineering"],"department":[{"_id":"9"},{"_id":"728"}],"user_id":"14931","_id":"36810","status":"public","publication":"Proceedings of the Combustion Institute","type":"journal_article","doi":"10.1016/j.proci.2022.07.157","title":"Experimental and kinetic modeling study of the positive ions in premixed ethylene flames over a range of equivalence ratios","author":[{"first_name":"Denis A.","full_name":"Knyazkov, Denis A.","last_name":"Knyazkov"},{"first_name":"Andrey V.","full_name":"Cherepanov, Andrey V.","last_name":"Cherepanov"},{"full_name":"Kiselev, Vitaly G.","last_name":"Kiselev","first_name":"Vitaly G."},{"first_name":"Ilya E.","full_name":"Gerasimov, Ilya E.","last_name":"Gerasimov"},{"first_name":"Tina","id":"94562","full_name":"Kasper, Tina","last_name":"Kasper","orcid":"0000-0003-3993-5316 "},{"full_name":"Shmakov, Andrey G.","last_name":"Shmakov","first_name":"Andrey G."}],"date_created":"2023-01-13T16:28:36Z","publisher":"Elsevier BV","date_updated":"2023-01-17T08:25:41Z","citation":{"chicago":"Knyazkov, Denis A., Andrey V. Cherepanov, Vitaly G. Kiselev, Ilya E. Gerasimov, Tina Kasper, and Andrey G. Shmakov. “Experimental and Kinetic Modeling Study of the Positive Ions in Premixed Ethylene Flames over a Range of Equivalence Ratios.” <i>Proceedings of the Combustion Institute</i>, 2022. <a href=\"https://doi.org/10.1016/j.proci.2022.07.157\">https://doi.org/10.1016/j.proci.2022.07.157</a>.","ieee":"D. A. Knyazkov, A. V. Cherepanov, V. G. Kiselev, I. E. Gerasimov, T. Kasper, and A. G. Shmakov, “Experimental and kinetic modeling study of the positive ions in premixed ethylene flames over a range of equivalence ratios,” <i>Proceedings of the Combustion Institute</i>, 2022, doi: <a href=\"https://doi.org/10.1016/j.proci.2022.07.157\">10.1016/j.proci.2022.07.157</a>.","ama":"Knyazkov DA, Cherepanov AV, Kiselev VG, Gerasimov IE, Kasper T, Shmakov AG. Experimental and kinetic modeling study of the positive ions in premixed ethylene flames over a range of equivalence ratios. <i>Proceedings of the Combustion Institute</i>. Published online 2022. doi:<a href=\"https://doi.org/10.1016/j.proci.2022.07.157\">10.1016/j.proci.2022.07.157</a>","mla":"Knyazkov, Denis A., et al. “Experimental and Kinetic Modeling Study of the Positive Ions in Premixed Ethylene Flames over a Range of Equivalence Ratios.” <i>Proceedings of the Combustion Institute</i>, Elsevier BV, 2022, doi:<a href=\"https://doi.org/10.1016/j.proci.2022.07.157\">10.1016/j.proci.2022.07.157</a>.","bibtex":"@article{Knyazkov_Cherepanov_Kiselev_Gerasimov_Kasper_Shmakov_2022, title={Experimental and kinetic modeling study of the positive ions in premixed ethylene flames over a range of equivalence ratios}, DOI={<a href=\"https://doi.org/10.1016/j.proci.2022.07.157\">10.1016/j.proci.2022.07.157</a>}, journal={Proceedings of the Combustion Institute}, publisher={Elsevier BV}, author={Knyazkov, Denis A. and Cherepanov, Andrey V. and Kiselev, Vitaly G. and Gerasimov, Ilya E. and Kasper, Tina and Shmakov, Andrey G.}, year={2022} }","short":"D.A. Knyazkov, A.V. Cherepanov, V.G. Kiselev, I.E. Gerasimov, T. Kasper, A.G. Shmakov, Proceedings of the Combustion Institute (2022).","apa":"Knyazkov, D. A., Cherepanov, A. V., Kiselev, V. G., Gerasimov, I. E., Kasper, T., &#38; Shmakov, A. G. (2022). Experimental and kinetic modeling study of the positive ions in premixed ethylene flames over a range of equivalence ratios. <i>Proceedings of the Combustion Institute</i>. <a href=\"https://doi.org/10.1016/j.proci.2022.07.157\">https://doi.org/10.1016/j.proci.2022.07.157</a>"},"year":"2022","publication_identifier":{"issn":["1540-7489"]},"publication_status":"published"},{"article_number":"095440702211001","article_type":"original","keyword":["Mechanical Engineering","Aerospace Engineering"],"language":[{"iso":"eng"}],"_id":"31330","user_id":"66192","department":[{"_id":"157"}],"abstract":[{"lang":"eng","text":"<jats:p> Owing to the implementation of multi-material construction methods in modern lightweight construction and the associated use of adhesive bonding technology, thermally induced relative displacements of the joining partners occur during the curing process. The resulting extremely complex thermo-chemo-mechanical stresses can influence the properties of the adhesive layers and reduce the load-bearing capacity. In this study, experiments are conducted to examine the influence of process-related thermal relative displacements on the mechanical properties of adhesives. The results show an anisotropy of the mechanical properties of the pre-deformed adhesive layers, depending on the magnitude and direction of the relative displacement. </jats:p>"}],"status":"public","type":"journal_article","publication":"Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering","title":"Directional dependence of the mechanical properties of structural adhesive joints with curing-induced pre-deformations","doi":"10.1177/09544070221100130","date_updated":"2023-01-17T08:26:45Z","publisher":"SAGE Publications","author":[{"first_name":"Felix","id":"66192","full_name":"Beule, Felix","last_name":"Beule"},{"full_name":"Teutenberg, Dominik","id":"537","last_name":"Teutenberg","first_name":"Dominik"},{"full_name":"Meschut, Gerson","id":"32056","last_name":"Meschut","orcid":"0000-0002-2763-1246","first_name":"Gerson"}],"date_created":"2022-05-19T05:26:32Z","year":"2022","citation":{"ieee":"F. Beule, D. Teutenberg, and G. Meschut, “Directional dependence of the mechanical properties of structural adhesive joints with curing-induced pre-deformations,” <i>Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering</i>, Art. no. 095440702211001, 2022, doi: <a href=\"https://doi.org/10.1177/09544070221100130\">10.1177/09544070221100130</a>.","chicago":"Beule, Felix, Dominik Teutenberg, and Gerson Meschut. “Directional Dependence of the Mechanical Properties of Structural Adhesive Joints with Curing-Induced Pre-Deformations.” <i>Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering</i>, 2022. <a href=\"https://doi.org/10.1177/09544070221100130\">https://doi.org/10.1177/09544070221100130</a>.","ama":"Beule F, Teutenberg D, Meschut G. Directional dependence of the mechanical properties of structural adhesive joints with curing-induced pre-deformations. <i>Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering</i>. Published online 2022. doi:<a href=\"https://doi.org/10.1177/09544070221100130\">10.1177/09544070221100130</a>","apa":"Beule, F., Teutenberg, D., &#38; Meschut, G. (2022). Directional dependence of the mechanical properties of structural adhesive joints with curing-induced pre-deformations. <i>Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering</i>, Article 095440702211001. <a href=\"https://doi.org/10.1177/09544070221100130\">https://doi.org/10.1177/09544070221100130</a>","mla":"Beule, Felix, et al. “Directional Dependence of the Mechanical Properties of Structural Adhesive Joints with Curing-Induced Pre-Deformations.” <i>Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering</i>, 095440702211001, SAGE Publications, 2022, doi:<a href=\"https://doi.org/10.1177/09544070221100130\">10.1177/09544070221100130</a>.","bibtex":"@article{Beule_Teutenberg_Meschut_2022, title={Directional dependence of the mechanical properties of structural adhesive joints with curing-induced pre-deformations}, DOI={<a href=\"https://doi.org/10.1177/09544070221100130\">10.1177/09544070221100130</a>}, number={095440702211001}, journal={Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering}, publisher={SAGE Publications}, author={Beule, Felix and Teutenberg, Dominik and Meschut, Gerson}, year={2022} }","short":"F. Beule, D. Teutenberg, G. Meschut, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering (2022)."},"publication_status":"published","quality_controlled":"1","publication_identifier":{"issn":["0954-4070","2041-2991"]}},{"type":"journal_article","publication":"Applications in Energy and Combustion Science","status":"public","_id":"36814","user_id":"14931","department":[{"_id":"9"},{"_id":"728"}],"article_number":"100107","keyword":["Fuel Technology","Energy (miscellaneous)","Chemical Engineering (miscellaneous)"],"language":[{"iso":"eng"}],"publication_status":"published","publication_identifier":{"issn":["2666-352X"]},"year":"2022","citation":{"short":"D. Kaczmarek, T. Bierkandt, C. Rudolph, S. Grimm, S. Shaqiri, M. Höner, N. Gaiser, B. Atakan, M. Köhler, P. Hemberger, T. Kasper, Applications in Energy and Combustion Science (2022).","mla":"Kaczmarek, D., et al. “Activation Effect of Ozone and DME on the Partial Oxidation of Natural Gas Surrogates and Validation of Pressure-Dependent Ozone Decomposition.” <i>Applications in Energy and Combustion Science</i>, 100107, Elsevier BV, 2022, doi:<a href=\"https://doi.org/10.1016/j.jaecs.2022.100107\">10.1016/j.jaecs.2022.100107</a>.","bibtex":"@article{Kaczmarek_Bierkandt_Rudolph_Grimm_Shaqiri_Höner_Gaiser_Atakan_Köhler_Hemberger_et al._2022, title={Activation effect of ozone and DME on the partial oxidation of natural gas surrogates and validation of pressure-dependent ozone decomposition}, DOI={<a href=\"https://doi.org/10.1016/j.jaecs.2022.100107\">10.1016/j.jaecs.2022.100107</a>}, number={100107}, journal={Applications in Energy and Combustion Science}, publisher={Elsevier BV}, author={Kaczmarek, D. and Bierkandt, T. and Rudolph, C. and Grimm, S. and Shaqiri, S. and Höner, M. and Gaiser, N. and Atakan, B. and Köhler, M. and Hemberger, P. and et al.}, year={2022} }","apa":"Kaczmarek, D., Bierkandt, T., Rudolph, C., Grimm, S., Shaqiri, S., Höner, M., Gaiser, N., Atakan, B., Köhler, M., Hemberger, P., &#38; Kasper, T. (2022). Activation effect of ozone and DME on the partial oxidation of natural gas surrogates and validation of pressure-dependent ozone decomposition. <i>Applications in Energy and Combustion Science</i>, Article 100107. <a href=\"https://doi.org/10.1016/j.jaecs.2022.100107\">https://doi.org/10.1016/j.jaecs.2022.100107</a>","chicago":"Kaczmarek, D., T. Bierkandt, C. Rudolph, S. Grimm, S. Shaqiri, M. Höner, N. Gaiser, et al. “Activation Effect of Ozone and DME on the Partial Oxidation of Natural Gas Surrogates and Validation of Pressure-Dependent Ozone Decomposition.” <i>Applications in Energy and Combustion Science</i>, 2022. <a href=\"https://doi.org/10.1016/j.jaecs.2022.100107\">https://doi.org/10.1016/j.jaecs.2022.100107</a>.","ieee":"D. Kaczmarek <i>et al.</i>, “Activation effect of ozone and DME on the partial oxidation of natural gas surrogates and validation of pressure-dependent ozone decomposition,” <i>Applications in Energy and Combustion Science</i>, Art. no. 100107, 2022, doi: <a href=\"https://doi.org/10.1016/j.jaecs.2022.100107\">10.1016/j.jaecs.2022.100107</a>.","ama":"Kaczmarek D, Bierkandt T, Rudolph C, et al. Activation effect of ozone and DME on the partial oxidation of natural gas surrogates and validation of pressure-dependent ozone decomposition. <i>Applications in Energy and Combustion Science</i>. Published online 2022. doi:<a href=\"https://doi.org/10.1016/j.jaecs.2022.100107\">10.1016/j.jaecs.2022.100107</a>"},"date_updated":"2023-01-17T08:27:58Z","publisher":"Elsevier BV","author":[{"first_name":"D.","last_name":"Kaczmarek","full_name":"Kaczmarek, D."},{"last_name":"Bierkandt","full_name":"Bierkandt, T.","first_name":"T."},{"first_name":"C.","last_name":"Rudolph","full_name":"Rudolph, C."},{"first_name":"S.","last_name":"Grimm","full_name":"Grimm, S."},{"last_name":"Shaqiri","full_name":"Shaqiri, S.","first_name":"S."},{"first_name":"M.","full_name":"Höner, M.","last_name":"Höner"},{"last_name":"Gaiser","full_name":"Gaiser, N.","first_name":"N."},{"first_name":"B.","full_name":"Atakan, B.","last_name":"Atakan"},{"first_name":"M.","last_name":"Köhler","full_name":"Köhler, M."},{"first_name":"P.","full_name":"Hemberger, P.","last_name":"Hemberger"},{"full_name":"Kasper, Tina","id":"94562","last_name":"Kasper","orcid":"0000-0003-3993-5316 ","first_name":"Tina"}],"date_created":"2023-01-13T16:29:21Z","title":"Activation effect of ozone and DME on the partial oxidation of natural gas surrogates and validation of pressure-dependent ozone decomposition","doi":"10.1016/j.jaecs.2022.100107"},{"year":"2022","citation":{"apa":"Kaczmarek, D., Rudolph, C., Atakan, B., &#38; Kasper, T. (2022). Kinetic investigation of the ozone-assisted partial oxidation of fuel-rich natural gas mixtures at elevated pressure. <i>Proceedings of the Combustion Institute</i>. <a href=\"https://doi.org/10.1016/j.proci.2022.07.195\">https://doi.org/10.1016/j.proci.2022.07.195</a>","short":"D. Kaczmarek, C. Rudolph, B. Atakan, T. Kasper, Proceedings of the Combustion Institute (2022).","mla":"Kaczmarek, Dennis, et al. “Kinetic Investigation of the Ozone-Assisted Partial Oxidation of Fuel-Rich Natural Gas Mixtures at Elevated Pressure.” <i>Proceedings of the Combustion Institute</i>, Elsevier BV, 2022, doi:<a href=\"https://doi.org/10.1016/j.proci.2022.07.195\">10.1016/j.proci.2022.07.195</a>.","bibtex":"@article{Kaczmarek_Rudolph_Atakan_Kasper_2022, title={Kinetic investigation of the ozone-assisted partial oxidation of fuel-rich natural gas mixtures at elevated pressure}, DOI={<a href=\"https://doi.org/10.1016/j.proci.2022.07.195\">10.1016/j.proci.2022.07.195</a>}, journal={Proceedings of the Combustion Institute}, publisher={Elsevier BV}, author={Kaczmarek, Dennis and Rudolph, Charlotte and Atakan, Burak and Kasper, Tina}, year={2022} }","ama":"Kaczmarek D, Rudolph C, Atakan B, Kasper T. Kinetic investigation of the ozone-assisted partial oxidation of fuel-rich natural gas mixtures at elevated pressure. <i>Proceedings of the Combustion Institute</i>. Published online 2022. doi:<a href=\"https://doi.org/10.1016/j.proci.2022.07.195\">10.1016/j.proci.2022.07.195</a>","ieee":"D. Kaczmarek, C. Rudolph, B. Atakan, and T. Kasper, “Kinetic investigation of the ozone-assisted partial oxidation of fuel-rich natural gas mixtures at elevated pressure,” <i>Proceedings of the Combustion Institute</i>, 2022, doi: <a href=\"https://doi.org/10.1016/j.proci.2022.07.195\">10.1016/j.proci.2022.07.195</a>.","chicago":"Kaczmarek, Dennis, Charlotte Rudolph, Burak Atakan, and Tina Kasper. “Kinetic Investigation of the Ozone-Assisted Partial Oxidation of Fuel-Rich Natural Gas Mixtures at Elevated Pressure.” <i>Proceedings of the Combustion Institute</i>, 2022. <a href=\"https://doi.org/10.1016/j.proci.2022.07.195\">https://doi.org/10.1016/j.proci.2022.07.195</a>."},"publication_status":"published","publication_identifier":{"issn":["1540-7489"]},"title":"Kinetic investigation of the ozone-assisted partial oxidation of fuel-rich natural gas mixtures at elevated pressure","doi":"10.1016/j.proci.2022.07.195","publisher":"Elsevier BV","date_updated":"2023-01-17T08:27:34Z","date_created":"2023-01-13T16:28:47Z","author":[{"full_name":"Kaczmarek, Dennis","last_name":"Kaczmarek","first_name":"Dennis"},{"last_name":"Rudolph","full_name":"Rudolph, Charlotte","first_name":"Charlotte"},{"full_name":"Atakan, Burak","last_name":"Atakan","first_name":"Burak"},{"first_name":"Tina","orcid":"0000-0003-3993-5316 ","last_name":"Kasper","id":"94562","full_name":"Kasper, Tina"}],"status":"public","type":"journal_article","publication":"Proceedings of the Combustion Institute","keyword":["Physical and Theoretical Chemistry","Mechanical Engineering","General Chemical Engineering"],"language":[{"iso":"eng"}],"_id":"36811","user_id":"14931","department":[{"_id":"9"},{"_id":"728"}]},{"status":"public","publication":"Proceedings of the Combustion Institute","type":"journal_article","keyword":["Physical and Theoretical Chemistry","Mechanical Engineering","General Chemical Engineering"],"language":[{"iso":"eng"}],"_id":"36813","department":[{"_id":"9"},{"_id":"728"}],"user_id":"14931","year":"2022","citation":{"apa":"Bierkandt, T., Hemberger, P., Oßwald, P., Gaiser, N., Hoener, M., Krüger, D., Kasper, T., &#38; Köhler, M. (2022). A combustion chemistry study of tetramethylethylene in a laminar premixed low-pressure hydrogen flame. <i>Proceedings of the Combustion Institute</i>. <a href=\"https://doi.org/10.1016/j.proci.2022.07.205\">https://doi.org/10.1016/j.proci.2022.07.205</a>","bibtex":"@article{Bierkandt_Hemberger_Oßwald_Gaiser_Hoener_Krüger_Kasper_Köhler_2022, title={A combustion chemistry study of tetramethylethylene in a laminar premixed low-pressure hydrogen flame}, DOI={<a href=\"https://doi.org/10.1016/j.proci.2022.07.205\">10.1016/j.proci.2022.07.205</a>}, journal={Proceedings of the Combustion Institute}, publisher={Elsevier BV}, author={Bierkandt, Thomas and Hemberger, Patrick and Oßwald, Patrick and Gaiser, Nina and Hoener, Martin and Krüger, Dominik and Kasper, Tina and Köhler, Markus}, year={2022} }","mla":"Bierkandt, Thomas, et al. “A Combustion Chemistry Study of Tetramethylethylene in a Laminar Premixed Low-Pressure Hydrogen Flame.” <i>Proceedings of the Combustion Institute</i>, Elsevier BV, 2022, doi:<a href=\"https://doi.org/10.1016/j.proci.2022.07.205\">10.1016/j.proci.2022.07.205</a>.","short":"T. Bierkandt, P. Hemberger, P. Oßwald, N. Gaiser, M. Hoener, D. Krüger, T. Kasper, M. Köhler, Proceedings of the Combustion Institute (2022).","chicago":"Bierkandt, Thomas, Patrick Hemberger, Patrick Oßwald, Nina Gaiser, Martin Hoener, Dominik Krüger, Tina Kasper, and Markus Köhler. “A Combustion Chemistry Study of Tetramethylethylene in a Laminar Premixed Low-Pressure Hydrogen Flame.” <i>Proceedings of the Combustion Institute</i>, 2022. <a href=\"https://doi.org/10.1016/j.proci.2022.07.205\">https://doi.org/10.1016/j.proci.2022.07.205</a>.","ieee":"T. Bierkandt <i>et al.</i>, “A combustion chemistry study of tetramethylethylene in a laminar premixed low-pressure hydrogen flame,” <i>Proceedings of the Combustion Institute</i>, 2022, doi: <a href=\"https://doi.org/10.1016/j.proci.2022.07.205\">10.1016/j.proci.2022.07.205</a>.","ama":"Bierkandt T, Hemberger P, Oßwald P, et al. A combustion chemistry study of tetramethylethylene in a laminar premixed low-pressure hydrogen flame. <i>Proceedings of the Combustion Institute</i>. Published online 2022. doi:<a href=\"https://doi.org/10.1016/j.proci.2022.07.205\">10.1016/j.proci.2022.07.205</a>"},"publication_identifier":{"issn":["1540-7489"]},"publication_status":"published","title":"A combustion chemistry study of tetramethylethylene in a laminar premixed low-pressure hydrogen flame","doi":"10.1016/j.proci.2022.07.205","publisher":"Elsevier BV","date_updated":"2023-01-17T08:28:30Z","date_created":"2023-01-13T16:29:11Z","author":[{"first_name":"Thomas","last_name":"Bierkandt","full_name":"Bierkandt, Thomas"},{"full_name":"Hemberger, Patrick","last_name":"Hemberger","first_name":"Patrick"},{"first_name":"Patrick","last_name":"Oßwald","full_name":"Oßwald, Patrick"},{"last_name":"Gaiser","full_name":"Gaiser, Nina","first_name":"Nina"},{"first_name":"Martin","last_name":"Hoener","full_name":"Hoener, Martin"},{"full_name":"Krüger, Dominik","last_name":"Krüger","first_name":"Dominik"},{"first_name":"Tina","orcid":"0000-0003-3993-5316 ","last_name":"Kasper","full_name":"Kasper, Tina","id":"94562"},{"first_name":"Markus","full_name":"Köhler, Markus","last_name":"Köhler"}]},{"user_id":"45779","department":[{"_id":"157"},{"_id":"630"}],"project":[{"grant_number":"418701707","name":"TRR 285: TRR 285","_id":"130"},{"name":"TRR 285 - A: TRR 285 - Project Area A","_id":"131"},{"_id":"135","name":"TRR 285 – A01: TRR 285 - Subproject A01"}],"_id":"33002","type":"journal_article","status":"public","author":[{"full_name":"Böhnke, Max","id":"45779","last_name":"Böhnke","first_name":"Max"},{"last_name":"Unruh","id":"72763","full_name":"Unruh, Eduard","first_name":"Eduard"},{"first_name":"Stanislaw","full_name":"Sell, Stanislaw","last_name":"Sell"},{"last_name":"Bobbert","id":"7850","full_name":"Bobbert, Mathias","first_name":"Mathias"},{"id":"7728","full_name":"Hein, David","last_name":"Hein","first_name":"David"},{"id":"32056","full_name":"Meschut, Gerson","orcid":"0000-0002-2763-1246","last_name":"Meschut","first_name":"Gerson"}],"volume":926,"date_updated":"2023-01-17T09:02:59Z","conference":{"name":"ESAFORM 2022","location":"Braga, Portugal"},"doi":"10.4028/p-wpuzyw","publication_status":"published","publication_identifier":{"issn":["1662-9795"]},"citation":{"chicago":"Böhnke, Max, Eduard Unruh, Stanislaw Sell, Mathias Bobbert, David Hein, and Gerson Meschut. “Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests.” <i>Key Engineering Materials</i> 926 (2022): 1564–72. <a href=\"https://doi.org/10.4028/p-wpuzyw\">https://doi.org/10.4028/p-wpuzyw</a>.","ieee":"M. Böhnke, E. Unruh, S. Sell, M. Bobbert, D. Hein, and G. Meschut, “Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests,” <i>Key Engineering Materials</i>, vol. 926, pp. 1564–1572, 2022, doi: <a href=\"https://doi.org/10.4028/p-wpuzyw\">10.4028/p-wpuzyw</a>.","ama":"Böhnke M, Unruh E, Sell S, Bobbert M, Hein D, Meschut G. Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests. <i>Key Engineering Materials</i>. 2022;926:1564-1572. doi:<a href=\"https://doi.org/10.4028/p-wpuzyw\">10.4028/p-wpuzyw</a>","short":"M. Böhnke, E. Unruh, S. Sell, M. Bobbert, D. Hein, G. Meschut, Key Engineering Materials 926 (2022) 1564–1572.","bibtex":"@article{Böhnke_Unruh_Sell_Bobbert_Hein_Meschut_2022, title={Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests}, volume={926}, DOI={<a href=\"https://doi.org/10.4028/p-wpuzyw\">10.4028/p-wpuzyw</a>}, journal={Key Engineering Materials}, publisher={Trans Tech Publications, Ltd.}, author={Böhnke, Max and Unruh, Eduard and Sell, Stanislaw and Bobbert, Mathias and Hein, David and Meschut, Gerson}, year={2022}, pages={1564–1572} }","mla":"Böhnke, Max, et al. “Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests.” <i>Key Engineering Materials</i>, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 1564–72, doi:<a href=\"https://doi.org/10.4028/p-wpuzyw\">10.4028/p-wpuzyw</a>.","apa":"Böhnke, M., Unruh, E., Sell, S., Bobbert, M., Hein, D., &#38; Meschut, G. (2022). Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests. <i>Key Engineering Materials</i>, <i>926</i>, 1564–1572. <a href=\"https://doi.org/10.4028/p-wpuzyw\">https://doi.org/10.4028/p-wpuzyw</a>"},"intvolume":"       926","page":"1564-1572","language":[{"iso":"eng"}],"keyword":["Mechanical Engineering","Mechanics of Materials","General Materials Science"],"publication":"Key Engineering Materials","abstract":[{"text":"<jats:p>Many mechanical material properties show a dependence on the strain rate, e.g. yield stress or elongation at fracture. The quantitative description of the material behavior under dynamic loading is of major importance for the evaluation of crash safety. This is carried out using numerical methods and requires characteristic values for the materials used. For the standardized determination of dynamic characteristic values in sheet metal materials, tensile tests performed according to the guideline from [1]. A particular challenge in dynamic tensile tests is the force measurement during the test. For this purpose, strain gauges are attached on each specimen, wired to the measuring equipment and calibrated. This is a common way to determine a force signal that is as low in vibration and as free of bending moments as possible. The preparation effort for the used strain gauges are enormous. For these reasons, an optical method to determine the force by strain measurement using DIC is presented. The experiments are carried out on a high speed tensile testing system. In combioantion with a 3D DIC high speed system for optical strain measurement. The elastic deformation of the specimen in the dynamometric section is measured using strain gauges and the optical method. The measured signals are then compared to validate the presented method. The investigations are conducted using the dual phase steel material HCT590X and the aluminum material EN AW-6014 T4. Strain rates of up to 240 s-1 are investigated.</jats:p>","lang":"eng"}],"date_created":"2022-08-18T09:33:54Z","publisher":"Trans Tech Publications, Ltd.","title":"Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests","quality_controlled":"1","year":"2022"},{"user_id":"45779","department":[{"_id":"157"},{"_id":"630"}],"project":[{"grant_number":"418701707","_id":"130","name":"TRR 285: TRR 285"},{"_id":"131","name":"TRR 285 - A: TRR 285 - Project Area A"},{"name":"TRR 285 – A01: TRR 285 - Subproject A01","_id":"135"}],"_id":"33003","language":[{"iso":"eng"}],"type":"book_chapter","publication":"The Minerals, Metals &amp; Materials Series","status":"public","author":[{"first_name":"Max","id":"45779","full_name":"Böhnke, Max","last_name":"Böhnke"},{"last_name":"Bielak","full_name":"Bielak, Christian Roman","id":"34782","first_name":"Christian Roman"},{"first_name":"Mathias","last_name":"Bobbert","full_name":"Bobbert, Mathias","id":"7850"},{"first_name":"Gerson","id":"32056","full_name":"Meschut, Gerson","orcid":"0000-0002-2763-1246","last_name":"Meschut"}],"date_created":"2022-08-18T09:38:39Z","date_updated":"2023-01-17T09:03:25Z","publisher":"Springer International Publishing","conference":{"location":"Toronto, Kanada","name":"NUMISHEET 2022"},"doi":"10.1007/978-3-031-06212-4_52","title":"Development of a Modified Punch Test for Investigating the Failure Behavior in Sheet Metal Materials","publication_status":"published","quality_controlled":"1","publication_identifier":{"issn":["2367-1181","2367-1696"],"isbn":["9783031062117","9783031062124"]},"citation":{"apa":"Böhnke, M., Bielak, C. R., Bobbert, M., &#38; Meschut, G. (2022). Development of a Modified Punch Test for Investigating the Failure Behavior in Sheet Metal Materials. In <i>The Minerals, Metals &#38;amp; Materials Series</i>. NUMISHEET 2022, Toronto, Kanada. Springer International Publishing. <a href=\"https://doi.org/10.1007/978-3-031-06212-4_52\">https://doi.org/10.1007/978-3-031-06212-4_52</a>","ama":"Böhnke M, Bielak CR, Bobbert M, Meschut G. Development of a Modified Punch Test for Investigating the Failure Behavior in Sheet Metal Materials. In: <i>The Minerals, Metals &#38;amp; Materials Series</i>. Springer International Publishing; 2022. doi:<a href=\"https://doi.org/10.1007/978-3-031-06212-4_52\">10.1007/978-3-031-06212-4_52</a>","mla":"Böhnke, Max, et al. “Development of a Modified Punch Test for Investigating the Failure Behavior in Sheet Metal Materials.” <i>The Minerals, Metals &#38;amp; Materials Series</i>, Springer International Publishing, 2022, doi:<a href=\"https://doi.org/10.1007/978-3-031-06212-4_52\">10.1007/978-3-031-06212-4_52</a>.","bibtex":"@inbook{Böhnke_Bielak_Bobbert_Meschut_2022, place={Cham}, title={Development of a Modified Punch Test for Investigating the Failure Behavior in Sheet Metal Materials}, DOI={<a href=\"https://doi.org/10.1007/978-3-031-06212-4_52\">10.1007/978-3-031-06212-4_52</a>}, booktitle={The Minerals, Metals &#38;amp; Materials Series}, publisher={Springer International Publishing}, author={Böhnke, Max and Bielak, Christian Roman and Bobbert, Mathias and Meschut, Gerson}, year={2022} }","short":"M. Böhnke, C.R. Bielak, M. Bobbert, G. Meschut, in: The Minerals, Metals &#38;amp; Materials Series, Springer International Publishing, Cham, 2022.","ieee":"M. Böhnke, C. R. Bielak, M. Bobbert, and G. Meschut, “Development of a Modified Punch Test for Investigating the Failure Behavior in Sheet Metal Materials,” in <i>The Minerals, Metals &#38;amp; Materials Series</i>, Cham: Springer International Publishing, 2022.","chicago":"Böhnke, Max, Christian Roman Bielak, Mathias Bobbert, and Gerson Meschut. “Development of a Modified Punch Test for Investigating the Failure Behavior in Sheet Metal Materials.” In <i>The Minerals, Metals &#38;amp; Materials Series</i>. Cham: Springer International Publishing, 2022. <a href=\"https://doi.org/10.1007/978-3-031-06212-4_52\">https://doi.org/10.1007/978-3-031-06212-4_52</a>."},"year":"2022","place":"Cham"},{"project":[{"_id":"130","name":"TRR 285: TRR 285","grant_number":"418701707"},{"name":"TRR 285 - A: TRR 285 - Project Area A","_id":"131"},{"name":"TRR 285 – A01: TRR 285 - Subproject A01","_id":"135"}],"_id":"34572","user_id":"45779","department":[{"_id":"157"}],"language":[{"iso":"eng"}],"type":"journal_article","publication":"Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications","status":"public","publisher":"SAGE Journals","date_updated":"2023-01-17T09:02:49Z","author":[{"first_name":"Max","full_name":"Böhnke, Max","id":"45779","last_name":"Böhnke"},{"id":"34782","full_name":"Bielak, Christian Roman","last_name":"Bielak","first_name":"Christian Roman"},{"last_name":"Bobbert","full_name":"Bobbert, Mathias","id":"7850","first_name":"Mathias"},{"last_name":"Meschut","orcid":"0000-0002-2763-1246","full_name":"Meschut, Gerson","id":"32056","first_name":"Gerson"}],"date_created":"2022-12-20T08:43:00Z","title":"Experimental and numerical investigation of the influence of multiaxial loading conditions on the failure behavior of clinched joints","doi":"10.1177/14644207221145886","quality_controlled":"1","year":"2022","citation":{"apa":"Böhnke, M., Bielak, C. R., Bobbert, M., &#38; Meschut, G. (2022). Experimental and numerical investigation of the influence of multiaxial loading conditions on the failure behavior of clinched joints. <i>Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications</i>. <a href=\"https://doi.org/10.1177/14644207221145886\">https://doi.org/10.1177/14644207221145886</a>","short":"M. Böhnke, C.R. Bielak, M. Bobbert, G. Meschut, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2022).","mla":"Böhnke, Max, et al. “Experimental and Numerical Investigation of the Influence of Multiaxial Loading Conditions on the Failure Behavior of Clinched Joints.” <i>Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications</i>, SAGE Journals, 2022, doi:<a href=\"https://doi.org/10.1177/14644207221145886\">10.1177/14644207221145886</a>.","bibtex":"@article{Böhnke_Bielak_Bobbert_Meschut_2022, title={Experimental and numerical investigation of the influence of multiaxial loading conditions on the failure behavior of clinched joints}, DOI={<a href=\"https://doi.org/10.1177/14644207221145886\">10.1177/14644207221145886</a>}, journal={Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications}, publisher={SAGE Journals}, author={Böhnke, Max and Bielak, Christian Roman and Bobbert, Mathias and Meschut, Gerson}, year={2022} }","ama":"Böhnke M, Bielak CR, Bobbert M, Meschut G. Experimental and numerical investigation of the influence of multiaxial loading conditions on the failure behavior of clinched joints. <i>Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications</i>. Published online 2022. doi:<a href=\"https://doi.org/10.1177/14644207221145886\">10.1177/14644207221145886</a>","ieee":"M. Böhnke, C. R. Bielak, M. Bobbert, and G. Meschut, “Experimental and numerical investigation of the influence of multiaxial loading conditions on the failure behavior of clinched joints,” <i>Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications</i>, 2022, doi: <a href=\"https://doi.org/10.1177/14644207221145886\">10.1177/14644207221145886</a>.","chicago":"Böhnke, Max, Christian Roman Bielak, Mathias Bobbert, and Gerson Meschut. “Experimental and Numerical Investigation of the Influence of Multiaxial Loading Conditions on the Failure Behavior of Clinched Joints.” <i>Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications</i>, 2022. <a href=\"https://doi.org/10.1177/14644207221145886\">https://doi.org/10.1177/14644207221145886</a>."}},{"language":[{"iso":"eng"}],"department":[{"_id":"761"}],"user_id":"14931","_id":"34716","status":"public","publication":"IEEE Transactions on Technology and Society","type":"journal_article","doi":"10.1109/TTS.2021.3111823","title":"A Comprehensive Study on Face Recognition Biases Beyond Demographics","volume":3,"author":[{"first_name":"Philipp","last_name":"Terhörst","full_name":"Terhörst, Philipp","id":"97123"},{"full_name":"Kolf, Jan Niklas","last_name":"Kolf","first_name":"Jan Niklas"},{"first_name":"Marco","full_name":"Huber, Marco","last_name":"Huber"},{"first_name":"Florian","last_name":"Kirchbuchner","full_name":"Kirchbuchner, Florian"},{"first_name":"Naser","last_name":"Damer","full_name":"Damer, Naser"},{"first_name":"Aythami Morales","full_name":"Moreno, Aythami Morales","last_name":"Moreno"},{"full_name":"Fierrez, Julian","last_name":"Fierrez","first_name":"Julian"},{"full_name":"Kuijper, Arjan","last_name":"Kuijper","first_name":"Arjan"}],"date_created":"2022-12-21T12:30:34Z","date_updated":"2023-01-17T09:15:42Z","page":"16-30","intvolume":"         3","citation":{"apa":"Terhörst, P., Kolf, J. N., Huber, M., Kirchbuchner, F., Damer, N., Moreno, A. M., Fierrez, J., &#38; Kuijper, A. (2022). A Comprehensive Study on Face Recognition Biases Beyond Demographics. <i>IEEE Transactions on Technology and Society</i>, <i>3</i>(1), 16–30. <a href=\"https://doi.org/10.1109/TTS.2021.3111823\">https://doi.org/10.1109/TTS.2021.3111823</a>","bibtex":"@article{Terhörst_Kolf_Huber_Kirchbuchner_Damer_Moreno_Fierrez_Kuijper_2022, title={A Comprehensive Study on Face Recognition Biases Beyond Demographics}, volume={3}, DOI={<a href=\"https://doi.org/10.1109/TTS.2021.3111823\">10.1109/TTS.2021.3111823</a>}, number={1}, journal={IEEE Transactions on Technology and Society}, author={Terhörst, Philipp and Kolf, Jan Niklas and Huber, Marco and Kirchbuchner, Florian and Damer, Naser and Moreno, Aythami Morales and Fierrez, Julian and Kuijper, Arjan}, year={2022}, pages={16–30} }","mla":"Terhörst, Philipp, et al. “A Comprehensive Study on Face Recognition Biases Beyond Demographics.” <i>IEEE Transactions on Technology and Society</i>, vol. 3, no. 1, 2022, pp. 16–30, doi:<a href=\"https://doi.org/10.1109/TTS.2021.3111823\">10.1109/TTS.2021.3111823</a>.","short":"P. Terhörst, J.N. Kolf, M. Huber, F. Kirchbuchner, N. Damer, A.M. Moreno, J. Fierrez, A. Kuijper, IEEE Transactions on Technology and Society 3 (2022) 16–30.","chicago":"Terhörst, Philipp, Jan Niklas Kolf, Marco Huber, Florian Kirchbuchner, Naser Damer, Aythami Morales Moreno, Julian Fierrez, and Arjan Kuijper. “A Comprehensive Study on Face Recognition Biases Beyond Demographics.” <i>IEEE Transactions on Technology and Society</i> 3, no. 1 (2022): 16–30. <a href=\"https://doi.org/10.1109/TTS.2021.3111823\">https://doi.org/10.1109/TTS.2021.3111823</a>.","ieee":"P. Terhörst <i>et al.</i>, “A Comprehensive Study on Face Recognition Biases Beyond Demographics,” <i>IEEE Transactions on Technology and Society</i>, vol. 3, no. 1, pp. 16–30, 2022, doi: <a href=\"https://doi.org/10.1109/TTS.2021.3111823\">10.1109/TTS.2021.3111823</a>.","ama":"Terhörst P, Kolf JN, Huber M, et al. A Comprehensive Study on Face Recognition Biases Beyond Demographics. <i>IEEE Transactions on Technology and Society</i>. 2022;3(1):16-30. doi:<a href=\"https://doi.org/10.1109/TTS.2021.3111823\">10.1109/TTS.2021.3111823</a>"},"year":"2022","issue":"1"}]