[{"publication":"The Journal of Physical Chemistry A","type":"journal_article","status":"public","department":[{"_id":"15"},{"_id":"170"},{"_id":"297"},{"_id":"230"},{"_id":"35"}],"user_id":"16199","_id":"40425","project":[{"_id":"52","name":"PC2: Computing Resources Provided by the Paderborn Center for Parallel Computing"}],"language":[{"iso":"eng"}],"keyword":["Physical and Theoretical Chemistry"],"issue":"13","publication_identifier":{"issn":["1089-5639","1520-5215"]},"publication_status":"published","page":"2075-2081","intvolume":"       126","citation":{"bibtex":"@article{Bathe_Dong_Schumacher_2022, title={Microscopic Study of Molecular Double Doping}, volume={126}, DOI={<a href=\"https://doi.org/10.1021/acs.jpca.1c09179\">10.1021/acs.jpca.1c09179</a>}, number={13}, journal={The Journal of Physical Chemistry A}, publisher={American Chemical Society (ACS)}, author={Bathe, Thomas and Dong, Chuan-Ding and Schumacher, Stefan}, year={2022}, pages={2075–2081} }","mla":"Bathe, Thomas, et al. “Microscopic Study of Molecular Double Doping.” <i>The Journal of Physical Chemistry A</i>, vol. 126, no. 13, American Chemical Society (ACS), 2022, pp. 2075–81, doi:<a href=\"https://doi.org/10.1021/acs.jpca.1c09179\">10.1021/acs.jpca.1c09179</a>.","short":"T. Bathe, C.-D. Dong, S. Schumacher, The Journal of Physical Chemistry A 126 (2022) 2075–2081.","apa":"Bathe, T., Dong, C.-D., &#38; Schumacher, S. (2022). Microscopic Study of Molecular Double Doping. <i>The Journal of Physical Chemistry A</i>, <i>126</i>(13), 2075–2081. <a href=\"https://doi.org/10.1021/acs.jpca.1c09179\">https://doi.org/10.1021/acs.jpca.1c09179</a>","ama":"Bathe T, Dong C-D, Schumacher S. Microscopic Study of Molecular Double Doping. <i>The Journal of Physical Chemistry A</i>. 2022;126(13):2075-2081. doi:<a href=\"https://doi.org/10.1021/acs.jpca.1c09179\">10.1021/acs.jpca.1c09179</a>","chicago":"Bathe, Thomas, Chuan-Ding Dong, and Stefan Schumacher. “Microscopic Study of Molecular Double Doping.” <i>The Journal of Physical Chemistry A</i> 126, no. 13 (2022): 2075–81. <a href=\"https://doi.org/10.1021/acs.jpca.1c09179\">https://doi.org/10.1021/acs.jpca.1c09179</a>.","ieee":"T. Bathe, C.-D. Dong, and S. Schumacher, “Microscopic Study of Molecular Double Doping,” <i>The Journal of Physical Chemistry A</i>, vol. 126, no. 13, pp. 2075–2081, 2022, doi: <a href=\"https://doi.org/10.1021/acs.jpca.1c09179\">10.1021/acs.jpca.1c09179</a>."},"year":"2022","volume":126,"date_created":"2023-01-26T15:31:50Z","author":[{"last_name":"Bathe","full_name":"Bathe, Thomas","first_name":"Thomas"},{"last_name":"Dong","id":"67188","full_name":"Dong, Chuan-Ding","first_name":"Chuan-Ding"},{"first_name":"Stefan","id":"27271","full_name":"Schumacher, Stefan","last_name":"Schumacher","orcid":"0000-0003-4042-4951"}],"date_updated":"2023-04-20T15:21:26Z","publisher":"American Chemical Society (ACS)","doi":"10.1021/acs.jpca.1c09179","title":"Microscopic Study of Molecular Double Doping"},{"type":"report","status":"public","abstract":[{"lang":"eng","text":"We study the effects of product differentiation on the bundling incentives of a two-product retailer. Two monopolistic manufacturers each produce a differentiated good. One sells it to both retailers, while the other only supplies a single retailer. Retailers compete in prices. Retail bundling is profitable when the goods are close substitutes. Only then is competition so intense that the retailer uses bundling to relax competition both within and across product markets, despite an aggravation of the double marginalization problem. Our asymmetric market structure arises endogenously for the case of close substitutes. In this case, bundling reduces social welfare."}],"department":[{"_id":"280"},{"_id":"475"}],"user_id":"37339","_id":"44091","project":[{"_id":"1","name":"SFB 901: SFB 901"},{"name":"SFB 901 - A: SFB 901 - Project Area A","_id":"2"},{"name":"SFB 901 - A3: SFB 901 - Subproject A3","_id":"7"}],"language":[{"iso":"eng"}],"keyword":["Retail bundling","upstream market power","double marginalization","product differentiation"],"publication_status":"draft","page":"43","jel":["D43","L13","L42"],"citation":{"ama":"Endres-Fröhlich AE, Hehenkamp B, Heinzel J. <i>The Impact of Product Differentiation on Retail Bundling in a Vertical Market</i>.","ieee":"A. E. Endres-Fröhlich, B. Hehenkamp, and J. Heinzel, <i>The Impact of Product Differentiation on Retail Bundling in a Vertical Market</i>. .","chicago":"Endres-Fröhlich, Angelika Elfriede, Burkhard Hehenkamp, and Joachim Heinzel. <i>The Impact of Product Differentiation on Retail Bundling in a Vertical Market</i>, n.d.","bibtex":"@book{Endres-Fröhlich_Hehenkamp_Heinzel, title={The Impact of Product Differentiation on Retail Bundling in a Vertical Market}, author={Endres-Fröhlich, Angelika Elfriede and Hehenkamp, Burkhard and Heinzel, Joachim} }","short":"A.E. Endres-Fröhlich, B. Hehenkamp, J. Heinzel, The Impact of Product Differentiation on Retail Bundling in a Vertical Market, n.d.","mla":"Endres-Fröhlich, Angelika Elfriede, et al. <i>The Impact of Product Differentiation on Retail Bundling in a Vertical Market</i>.","apa":"Endres-Fröhlich, A. E., Hehenkamp, B., &#38; Heinzel, J. (n.d.). <i>The Impact of Product Differentiation on Retail Bundling in a Vertical Market</i>."},"year":"2022","date_created":"2023-04-20T16:21:28Z","author":[{"first_name":"Angelika Elfriede","id":"48794","full_name":"Endres-Fröhlich, Angelika Elfriede","last_name":"Endres-Fröhlich"},{"first_name":"Burkhard","full_name":"Hehenkamp, Burkhard","id":"37339","last_name":"Hehenkamp"},{"first_name":"Joachim","full_name":"Heinzel, Joachim","last_name":"Heinzel"}],"date_updated":"2023-04-20T17:15:48Z","title":"The Impact of Product Differentiation on Retail Bundling in a Vertical Market"},{"year":"2022","citation":{"ama":"Ehlert T, Mamedov T, Schubert M, Kenig EY. Modellierung des Stofftransportes in einer geneigten Kolonne mit dem Ansatz der hydrodynamischen Analogien. In: ; 2022.","chicago":"Ehlert, Thomas, Tural Mamedov, Markus Schubert, and Eugeny Y. Kenig. “Modellierung Des Stofftransportes in Einer Geneigten Kolonne Mit Dem Ansatz Der Hydrodynamischen Analogien,” 2022.","ieee":"T. Ehlert, T. Mamedov, M. Schubert, and E. Y. Kenig, “Modellierung des Stofftransportes in einer geneigten Kolonne mit dem Ansatz der hydrodynamischen Analogien,” presented at the Jahrestreffen der ProcessNet Fachgruppen Fluidverfahrenstechnik und Hochdruckverfahrenstechnik, Frankfurt am Main, 2022.","apa":"Ehlert, T., Mamedov, T., Schubert, M., &#38; Kenig, E. Y. (2022). <i>Modellierung des Stofftransportes in einer geneigten Kolonne mit dem Ansatz der hydrodynamischen Analogien</i>. Jahrestreffen der ProcessNet Fachgruppen Fluidverfahrenstechnik und Hochdruckverfahrenstechnik, Frankfurt am Main.","bibtex":"@inproceedings{Ehlert_Mamedov_Schubert_Kenig_2022, title={Modellierung des Stofftransportes in einer geneigten Kolonne mit dem Ansatz der hydrodynamischen Analogien}, author={Ehlert, Thomas and Mamedov, Tural and Schubert, Markus and Kenig, Eugeny Y.}, year={2022} }","short":"T. Ehlert, T. Mamedov, M. Schubert, E.Y. Kenig, in: 2022.","mla":"Ehlert, Thomas, et al. <i>Modellierung Des Stofftransportes in Einer Geneigten Kolonne Mit Dem Ansatz Der Hydrodynamischen Analogien</i>. 2022."},"title":"Modellierung des Stofftransportes in einer geneigten Kolonne mit dem Ansatz der hydrodynamischen Analogien","conference":{"name":"Jahrestreffen der ProcessNet Fachgruppen Fluidverfahrenstechnik und Hochdruckverfahrenstechnik","start_date":"2022-05-02","end_date":"2022-05-03","location":"Frankfurt am Main"},"date_updated":"2023-04-21T06:28:40Z","date_created":"2022-05-10T12:53:33Z","author":[{"first_name":"Thomas","last_name":"Ehlert","id":"47151","full_name":"Ehlert, Thomas"},{"last_name":"Mamedov","full_name":"Mamedov, Tural","first_name":"Tural"},{"last_name":"Schubert","full_name":"Schubert, Markus","first_name":"Markus"},{"first_name":"Eugeny Y.","id":"665","full_name":"Kenig, Eugeny Y.","last_name":"Kenig"}],"status":"public","type":"conference","language":[{"iso":"eng"}],"_id":"31186","user_id":"47151","department":[{"_id":"9"},{"_id":"145"}]},{"ddc":["530"],"file_date_updated":"2022-10-31T15:05:24Z","language":[{"iso":"eng"}],"project":[{"_id":"52","name":"PC2: Computing Resources Provided by the Paderborn Center for Parallel Computing"},{"name":"TRR 142: TRR 142","_id":"53"},{"_id":"55","name":"TRR 142 - B: TRR 142 - Project Area B"},{"name":"TRR 142 - A: TRR 142 - Project Area A","_id":"54"},{"_id":"166","name":"TRR 142 - A11: TRR 142 - Subproject A11"},{"name":"TRR 142 - B07: TRR 142 - Subproject B07","_id":"168"}],"_id":"33965","user_id":"171","department":[{"_id":"15"},{"_id":"295"},{"_id":"230"},{"_id":"2"},{"_id":"165"},{"_id":"633"},{"_id":"429"},{"_id":"35"},{"_id":"790"}],"file":[{"date_created":"2022-10-31T15:05:24Z","creator":"adrianab","date_updated":"2022-10-31T15:05:24Z","file_id":"33966","file_name":"PhysRevMaterials.6.105401.pdf","access_level":"closed","file_size":3945388,"content_type":"application/pdf","relation":"main_file","success":1}],"status":"public","type":"journal_article","publication":"Phys. Rev. Materials","title":"Electrochemical performance of KTiOAsO_4 (KTA) in potassium-ion batteries from density-functional theory","main_file_link":[{"open_access":"1","url":"https://journals.aps.org/prmaterials/abstract/10.1103/PhysRevMaterials.6.105401"}],"doi":"10.1103/PhysRevMaterials.6.105401","oa":"1","publisher":"American Physical Society","date_updated":"2023-04-21T11:30:08Z","author":[{"first_name":"Adriana","id":"58349","full_name":"Bocchini, Adriana","orcid":"0000-0002-2134-3075","last_name":"Bocchini"},{"first_name":"Uwe","orcid":"0000-0002-4476-223X","last_name":"Gerstmann","full_name":"Gerstmann, Uwe","id":"171"},{"full_name":"Bartley, Tim","id":"49683","last_name":"Bartley","first_name":"Tim"},{"first_name":"Hans-Georg","id":"84268","full_name":"Steinrück, Hans-Georg","last_name":"Steinrück","orcid":"0000-0001-6373-0877"},{"first_name":"Gerald","last_name":"Henkel","full_name":"Henkel, Gerald"},{"last_name":"Schmidt","orcid":"0000-0002-2717-5076","full_name":"Schmidt, Wolf Gero","id":"468","first_name":"Wolf Gero"}],"date_created":"2022-10-31T15:00:19Z","volume":6,"year":"2022","citation":{"apa":"Bocchini, A., Gerstmann, U., Bartley, T., Steinrück, H.-G., Henkel, G., &#38; Schmidt, W. G. (2022). Electrochemical performance of KTiOAsO_4 (KTA) in potassium-ion batteries from density-functional theory. <i>Phys. Rev. Materials</i>, <i>6</i>, 105401. <a href=\"https://doi.org/10.1103/PhysRevMaterials.6.105401\">https://doi.org/10.1103/PhysRevMaterials.6.105401</a>","mla":"Bocchini, Adriana, et al. “Electrochemical Performance of KTiOAsO_4 (KTA) in Potassium-Ion Batteries from Density-Functional Theory.” <i>Phys. Rev. Materials</i>, vol. 6, American Physical Society, 2022, p. 105401, doi:<a href=\"https://doi.org/10.1103/PhysRevMaterials.6.105401\">10.1103/PhysRevMaterials.6.105401</a>.","bibtex":"@article{Bocchini_Gerstmann_Bartley_Steinrück_Henkel_Schmidt_2022, title={Electrochemical performance of KTiOAsO_4 (KTA) in potassium-ion batteries from density-functional theory}, volume={6}, DOI={<a href=\"https://doi.org/10.1103/PhysRevMaterials.6.105401\">10.1103/PhysRevMaterials.6.105401</a>}, journal={Phys. Rev. Materials}, publisher={American Physical Society}, author={Bocchini, Adriana and Gerstmann, Uwe and Bartley, Tim and Steinrück, Hans-Georg and Henkel, Gerald and Schmidt, Wolf Gero}, year={2022}, pages={105401} }","short":"A. Bocchini, U. Gerstmann, T. Bartley, H.-G. Steinrück, G. Henkel, W.G. Schmidt, Phys. Rev. Materials 6 (2022) 105401.","chicago":"Bocchini, Adriana, Uwe Gerstmann, Tim Bartley, Hans-Georg Steinrück, Gerald Henkel, and Wolf Gero Schmidt. “Electrochemical Performance of KTiOAsO_4 (KTA) in Potassium-Ion Batteries from Density-Functional Theory.” <i>Phys. Rev. Materials</i> 6 (2022): 105401. <a href=\"https://doi.org/10.1103/PhysRevMaterials.6.105401\">https://doi.org/10.1103/PhysRevMaterials.6.105401</a>.","ieee":"A. Bocchini, U. Gerstmann, T. Bartley, H.-G. Steinrück, G. Henkel, and W. G. Schmidt, “Electrochemical performance of KTiOAsO_4 (KTA) in potassium-ion batteries from density-functional theory,” <i>Phys. Rev. Materials</i>, vol. 6, p. 105401, 2022, doi: <a href=\"https://doi.org/10.1103/PhysRevMaterials.6.105401\">10.1103/PhysRevMaterials.6.105401</a>.","ama":"Bocchini A, Gerstmann U, Bartley T, Steinrück H-G, Henkel G, Schmidt WG. Electrochemical performance of KTiOAsO_4 (KTA) in potassium-ion batteries from density-functional theory. <i>Phys Rev Materials</i>. 2022;6:105401. doi:<a href=\"https://doi.org/10.1103/PhysRevMaterials.6.105401\">10.1103/PhysRevMaterials.6.105401</a>"},"page":"105401","intvolume":"         6","publication_status":"published","has_accepted_license":"1"},{"volume":105,"author":[{"orcid":"0000-0002-2134-3075","last_name":"Bocchini","id":"58349","full_name":"Bocchini, Adriana","first_name":"Adriana"},{"full_name":"Gerstmann, Uwe","id":"171","orcid":"0000-0002-4476-223X","last_name":"Gerstmann","first_name":"Uwe"},{"last_name":"Schmidt","orcid":"0000-0002-2717-5076","full_name":"Schmidt, Wolf Gero","id":"468","first_name":"Wolf Gero"}],"date_created":"2022-05-16T14:41:02Z","date_updated":"2023-04-21T11:29:05Z","publisher":"American Physical Society","doi":"10.1103/PhysRevB.105.205118","title":"Oxygen vacancies in KTiOPO_4: Optical absorption from hybrid DFT","intvolume":"       105","page":"205118","citation":{"apa":"Bocchini, A., Gerstmann, U., &#38; Schmidt, W. G. (2022). Oxygen vacancies in KTiOPO_4: Optical absorption from hybrid DFT. <i>Phys. Rev. B</i>, <i>105</i>, 205118. <a href=\"https://doi.org/10.1103/PhysRevB.105.205118\">https://doi.org/10.1103/PhysRevB.105.205118</a>","short":"A. Bocchini, U. Gerstmann, W.G. Schmidt, Phys. Rev. B 105 (2022) 205118.","bibtex":"@article{Bocchini_Gerstmann_Schmidt_2022, title={Oxygen vacancies in KTiOPO_4: Optical absorption from hybrid DFT}, volume={105}, DOI={<a href=\"https://doi.org/10.1103/PhysRevB.105.205118\">10.1103/PhysRevB.105.205118</a>}, journal={Phys. Rev. B}, publisher={American Physical Society}, author={Bocchini, Adriana and Gerstmann, Uwe and Schmidt, Wolf Gero}, year={2022}, pages={205118} }","mla":"Bocchini, Adriana, et al. “Oxygen Vacancies in KTiOPO_4: Optical Absorption from Hybrid DFT.” <i>Phys. Rev. B</i>, vol. 105, American Physical Society, 2022, p. 205118, doi:<a href=\"https://doi.org/10.1103/PhysRevB.105.205118\">10.1103/PhysRevB.105.205118</a>.","ieee":"A. Bocchini, U. Gerstmann, and W. G. Schmidt, “Oxygen vacancies in KTiOPO_4: Optical absorption from hybrid DFT,” <i>Phys. Rev. B</i>, vol. 105, p. 205118, 2022, doi: <a href=\"https://doi.org/10.1103/PhysRevB.105.205118\">10.1103/PhysRevB.105.205118</a>.","chicago":"Bocchini, Adriana, Uwe Gerstmann, and Wolf Gero Schmidt. “Oxygen Vacancies in KTiOPO_4: Optical Absorption from Hybrid DFT.” <i>Phys. Rev. B</i> 105 (2022): 205118. <a href=\"https://doi.org/10.1103/PhysRevB.105.205118\">https://doi.org/10.1103/PhysRevB.105.205118</a>.","ama":"Bocchini A, Gerstmann U, Schmidt WG. Oxygen vacancies in KTiOPO_4: Optical absorption from hybrid DFT. <i>Phys Rev B</i>. 2022;105:205118. doi:<a href=\"https://doi.org/10.1103/PhysRevB.105.205118\">10.1103/PhysRevB.105.205118</a>"},"year":"2022","department":[{"_id":"15"},{"_id":"295"},{"_id":"170"},{"_id":"230"},{"_id":"429"},{"_id":"35"},{"_id":"790"}],"user_id":"171","_id":"31254","project":[{"name":"PC2: Computing Resources Provided by the Paderborn Center for Parallel Computing","_id":"52"},{"_id":"53","name":"TRR 142: TRR 142"},{"name":"TRR 142 - A: TRR 142 - Project Area A","_id":"54"},{"_id":"55","name":"TRR 142 - B: TRR 142 - Project Area B"},{"_id":"166","name":"TRR 142 - A11: TRR 142 - Subproject A11"},{"_id":"168","name":"TRR 142 - B07: TRR 142 - Subproject B07"}],"language":[{"iso":"eng"}],"publication":"Phys. Rev. B","type":"journal_article","status":"public"},{"title":"Experimental Demonstration of a 2.2kW Active-Clamp Converter for High-Current Wide-Voltage-Transfer Ratio Applications","conference":{"name":"EPE","start_date":"2022-09","location":"Hannover, Germany"},"date_updated":"2023-04-25T08:41:27Z","date_created":"2023-04-25T08:35:42Z","author":[{"first_name":"Philipp","last_name":"Rehlaender","full_name":"Rehlaender, Philipp","id":"69469"},{"full_name":"Korthauer, Bastian","last_name":"Korthauer","first_name":"Bastian"},{"last_name":"Schafmeister","id":"71291","full_name":"Schafmeister, Frank","first_name":"Frank"},{"first_name":"Joachim","last_name":"Böcker","orcid":"0000-0002-8480-7295","full_name":"Böcker, Joachim","id":"66"}],"year":"2022","citation":{"apa":"Rehlaender, P., Korthauer, B., Schafmeister, F., &#38; Böcker, J. (2022). Experimental Demonstration of a 2.2kW Active-Clamp Converter for High-Current Wide-Voltage-Transfer Ratio Applications. <i>2022 24th European Conference on Power Electronics and Applications (EPE’22 ECCE Europe)</i>, P.1-P.11.","bibtex":"@inproceedings{Rehlaender_Korthauer_Schafmeister_Böcker_2022, title={Experimental Demonstration of a 2.2kW Active-Clamp Converter for High-Current Wide-Voltage-Transfer Ratio Applications}, booktitle={2022 24th European Conference on Power Electronics and Applications (EPE’22 ECCE Europe)}, author={Rehlaender, Philipp and Korthauer, Bastian and Schafmeister, Frank and Böcker, Joachim}, year={2022}, pages={P.1-P.11} }","mla":"Rehlaender, Philipp, et al. “Experimental Demonstration of a 2.2kW Active-Clamp Converter for High-Current Wide-Voltage-Transfer Ratio Applications.” <i>2022 24th European Conference on Power Electronics and Applications (EPE’22 ECCE Europe)</i>, 2022, p. P.1-P.11.","short":"P. Rehlaender, B. Korthauer, F. Schafmeister, J. Böcker, in: 2022 24th European Conference on Power Electronics and Applications (EPE’22 ECCE Europe), 2022, p. P.1-P.11.","ama":"Rehlaender P, Korthauer B, Schafmeister F, Böcker J. Experimental Demonstration of a 2.2kW Active-Clamp Converter for High-Current Wide-Voltage-Transfer Ratio Applications. In: <i>2022 24th European Conference on Power Electronics and Applications (EPE’22 ECCE Europe)</i>. ; 2022:P.1-P.11.","chicago":"Rehlaender, Philipp, Bastian Korthauer, Frank Schafmeister, and Joachim Böcker. “Experimental Demonstration of a 2.2kW Active-Clamp Converter for High-Current Wide-Voltage-Transfer Ratio Applications.” In <i>2022 24th European Conference on Power Electronics and Applications (EPE’22 ECCE Europe)</i>, P.1-P.11, 2022.","ieee":"P. Rehlaender, B. Korthauer, F. Schafmeister, and J. Böcker, “Experimental Demonstration of a 2.2kW Active-Clamp Converter for High-Current Wide-Voltage-Transfer Ratio Applications,” in <i>2022 24th European Conference on Power Electronics and Applications (EPE’22 ECCE Europe)</i>, Hannover, Germany, 2022, p. P.1-P.11."},"page":"P.1-P.11","language":[{"iso":"eng"}],"_id":"44164","user_id":"66","department":[{"_id":"52"}],"status":"public","type":"conference","publication":"2022 24th European Conference on Power Electronics and Applications (EPE’22 ECCE Europe)"},{"title":"Phase-Shift Modulation for Flying-Capacitor DC-DC Converters","conference":{"name":"EPE","start_date":"2022-09","location":"Hannover, Germany"},"date_updated":"2023-04-25T08:28:00Z","author":[{"first_name":"Philipp","full_name":"Rehlaender, Philipp","id":"69469","last_name":"Rehlaender"},{"last_name":"Schafmeister","full_name":"Schafmeister, Frank","id":"71291","first_name":"Frank"},{"first_name":"Joachim","last_name":"Böcker","orcid":"0000-0002-8480-7295","full_name":"Böcker, Joachim","id":"66"}],"date_created":"2023-04-25T08:24:57Z","year":"2022","page":"1-9","citation":{"ieee":"P. Rehlaender, F. Schafmeister, and J. Böcker, “Phase-Shift Modulation for Flying-Capacitor DC-DC Converters,” in <i>2022 24th European Conference on Power Electronics and Applications (EPE’22 ECCE Europe)</i>, Hannover, Germany, 2022, pp. 1–9.","chicago":"Rehlaender, Philipp, Frank Schafmeister, and Joachim Böcker. “Phase-Shift Modulation for Flying-Capacitor DC-DC Converters.” In <i>2022 24th European Conference on Power Electronics and Applications (EPE’22 ECCE Europe)</i>, 1–9, 2022.","ama":"Rehlaender P, Schafmeister F, Böcker J. Phase-Shift Modulation for Flying-Capacitor DC-DC Converters. In: <i>2022 24th European Conference on Power Electronics and Applications (EPE’22 ECCE Europe)</i>. ; 2022:1-9.","mla":"Rehlaender, Philipp, et al. “Phase-Shift Modulation for Flying-Capacitor DC-DC Converters.” <i>2022 24th European Conference on Power Electronics and Applications (EPE’22 ECCE Europe)</i>, 2022, pp. 1–9.","bibtex":"@inproceedings{Rehlaender_Schafmeister_Böcker_2022, title={Phase-Shift Modulation for Flying-Capacitor DC-DC Converters}, booktitle={2022 24th European Conference on Power Electronics and Applications (EPE’22 ECCE Europe)}, author={Rehlaender, Philipp and Schafmeister, Frank and Böcker, Joachim}, year={2022}, pages={1–9} }","short":"P. Rehlaender, F. Schafmeister, J. Böcker, in: 2022 24th European Conference on Power Electronics and Applications (EPE’22 ECCE Europe), 2022, pp. 1–9.","apa":"Rehlaender, P., Schafmeister, F., &#38; Böcker, J. (2022). Phase-Shift Modulation for Flying-Capacitor DC-DC Converters. <i>2022 24th European Conference on Power Electronics and Applications (EPE’22 ECCE Europe)</i>, 1–9."},"language":[{"iso":"eng"}],"_id":"44161","department":[{"_id":"52"}],"user_id":"66","status":"public","publication":"2022 24th European Conference on Power Electronics and Applications (EPE’22 ECCE Europe)","type":"conference"},{"quality_controlled":"1","publication_identifier":{"issn":["0302-9743","1611-3349"],"isbn":["9783030954697","9783030954703"]},"publication_status":"published","citation":{"chicago":"Wohlleben, Meike Claudia, Amelie Bender, Sebastian Peitz, and Walter Sextro. “Development of a Hybrid Modeling Methodology for Oscillating Systems with Friction.” In <i>Machine Learning, Optimization, and Data Science</i>. Cham: Springer International Publishing, 2022. <a href=\"https://doi.org/10.1007/978-3-030-95470-3_8\">https://doi.org/10.1007/978-3-030-95470-3_8</a>.","ieee":"M. C. Wohlleben, A. Bender, S. Peitz, and W. Sextro, “Development of a Hybrid Modeling Methodology for Oscillating Systems with Friction,” in <i>Machine Learning, Optimization, and Data Science</i>, Cham: Springer International Publishing, 2022.","ama":"Wohlleben MC, Bender A, Peitz S, Sextro W. Development of a Hybrid Modeling Methodology for Oscillating Systems with Friction. In: <i>Machine Learning, Optimization, and Data Science</i>. Springer International Publishing; 2022. doi:<a href=\"https://doi.org/10.1007/978-3-030-95470-3_8\">10.1007/978-3-030-95470-3_8</a>","apa":"Wohlleben, M. C., Bender, A., Peitz, S., &#38; Sextro, W. (2022). Development of a Hybrid Modeling Methodology for Oscillating Systems with Friction. In <i>Machine Learning, Optimization, and Data Science</i>. Springer International Publishing. <a href=\"https://doi.org/10.1007/978-3-030-95470-3_8\">https://doi.org/10.1007/978-3-030-95470-3_8</a>","bibtex":"@inbook{Wohlleben_Bender_Peitz_Sextro_2022, place={Cham}, title={Development of a Hybrid Modeling Methodology for Oscillating Systems with Friction}, DOI={<a href=\"https://doi.org/10.1007/978-3-030-95470-3_8\">10.1007/978-3-030-95470-3_8</a>}, booktitle={Machine Learning, Optimization, and Data Science}, publisher={Springer International Publishing}, author={Wohlleben, Meike Claudia and Bender, Amelie and Peitz, Sebastian and Sextro, Walter}, year={2022} }","mla":"Wohlleben, Meike Claudia, et al. “Development of a Hybrid Modeling Methodology for Oscillating Systems with Friction.” <i>Machine Learning, Optimization, and Data Science</i>, Springer International Publishing, 2022, doi:<a href=\"https://doi.org/10.1007/978-3-030-95470-3_8\">10.1007/978-3-030-95470-3_8</a>.","short":"M.C. Wohlleben, A. Bender, S. Peitz, W. Sextro, in: Machine Learning, Optimization, and Data Science, Springer International Publishing, Cham, 2022."},"place":"Cham","year":"2022","date_created":"2022-02-03T10:30:23Z","author":[{"first_name":"Meike Claudia","last_name":"Wohlleben","full_name":"Wohlleben, Meike Claudia","id":"43991"},{"first_name":"Amelie","id":"54290","full_name":"Bender, Amelie","last_name":"Bender"},{"last_name":"Peitz","orcid":"0000-0002-3389-793X","full_name":"Peitz, Sebastian","id":"47427","first_name":"Sebastian"},{"first_name":"Walter","full_name":"Sextro, Walter","id":"21220","last_name":"Sextro"}],"date_updated":"2023-04-26T12:10:58Z","publisher":"Springer International Publishing","doi":"10.1007/978-3-030-95470-3_8","main_file_link":[{"url":"https://link.springer.com/content/pdf/10.1007%2F978-3-030-95470-3_8.pdf"}],"title":"Development of a Hybrid Modeling Methodology for Oscillating Systems with Friction","publication":"Machine Learning, Optimization, and Data Science","type":"book_chapter","status":"public","department":[{"_id":"151"},{"_id":"655"}],"user_id":"43991","_id":"29727","language":[{"iso":"eng"}]},{"publication_status":"published","publication_identifier":{"issn":["2504-477X"]},"citation":{"short":"E. Moritzer, F. Flachmann, M. Richters, M. Neugebauer, Journal of Composites Science 6 (2022).","mla":"Moritzer, Elmar, et al. “Analysis of the Segregation Phenomena of Wood Fiber Reinforced Plastics.” <i>Journal of Composites Science</i>, vol. 6, no. 10, 321, MDPI AG, 2022, doi:<a href=\"https://doi.org/10.3390/jcs6100321\">10.3390/jcs6100321</a>.","bibtex":"@article{Moritzer_Flachmann_Richters_Neugebauer_2022, title={Analysis of the Segregation Phenomena of Wood Fiber Reinforced Plastics}, volume={6}, DOI={<a href=\"https://doi.org/10.3390/jcs6100321\">10.3390/jcs6100321</a>}, number={10321}, journal={Journal of Composites Science}, publisher={MDPI AG}, author={Moritzer, Elmar and Flachmann, Felix and Richters, Maximilian and Neugebauer, Marcel}, year={2022} }","apa":"Moritzer, E., Flachmann, F., Richters, M., &#38; Neugebauer, M. (2022). Analysis of the Segregation Phenomena of Wood Fiber Reinforced Plastics. <i>Journal of Composites Science</i>, <i>6</i>(10), Article 321. <a href=\"https://doi.org/10.3390/jcs6100321\">https://doi.org/10.3390/jcs6100321</a>","chicago":"Moritzer, Elmar, Felix Flachmann, Maximilian Richters, and Marcel Neugebauer. “Analysis of the Segregation Phenomena of Wood Fiber Reinforced Plastics.” <i>Journal of Composites Science</i> 6, no. 10 (2022). <a href=\"https://doi.org/10.3390/jcs6100321\">https://doi.org/10.3390/jcs6100321</a>.","ieee":"E. Moritzer, F. Flachmann, M. Richters, and M. Neugebauer, “Analysis of the Segregation Phenomena of Wood Fiber Reinforced Plastics,” <i>Journal of Composites Science</i>, vol. 6, no. 10, Art. no. 321, 2022, doi: <a href=\"https://doi.org/10.3390/jcs6100321\">10.3390/jcs6100321</a>.","ama":"Moritzer E, Flachmann F, Richters M, Neugebauer M. Analysis of the Segregation Phenomena of Wood Fiber Reinforced Plastics. <i>Journal of Composites Science</i>. 2022;6(10). doi:<a href=\"https://doi.org/10.3390/jcs6100321\">10.3390/jcs6100321</a>"},"intvolume":"         6","oa":"1","date_updated":"2023-04-26T13:40:41Z","author":[{"last_name":"Moritzer","id":"20531","full_name":"Moritzer, Elmar","first_name":"Elmar"},{"first_name":"Felix","last_name":"Flachmann","orcid":"0000-0002-7651-7028","id":"38212","full_name":"Flachmann, Felix"},{"full_name":"Richters, Maximilian","id":"38221","last_name":"Richters","first_name":"Maximilian"},{"first_name":"Marcel","full_name":"Neugebauer, Marcel","last_name":"Neugebauer"}],"volume":6,"main_file_link":[{"open_access":"1"}],"doi":"10.3390/jcs6100321","type":"journal_article","status":"public","_id":"33856","user_id":"38212","department":[{"_id":"321"},{"_id":"9"},{"_id":"367"},{"_id":"147"}],"article_number":"321","quality_controlled":"1","issue":"10","year":"2022","publisher":"MDPI AG","date_created":"2022-10-21T05:57:03Z","title":"Analysis of the Segregation Phenomena of Wood Fiber Reinforced Plastics","publication":"Journal of Composites Science","abstract":[{"lang":"eng","text":"<jats:p>Wood–plastic composites (WPC) are enjoying a steady increase in popularity. In addition to the extrusion of decking boards, the material is also used increasingly in injection molding. Depending on the formulation, geometry and process parameters, WPC tends to exhibit irregular filling behavior, similar to the processing of thermosets. In this work, the influence of matrix material and wood fiber content on the flow, mold filling and segregation behavior of WPC is analyzed. For this purpose, investigations were carried out on a flow spiral and a sheet cavity. WPC based on thermoplastic polyurethane (TPU) achieves significantly higher flow path lengths at a wood mass content of 30% than polypropylene (PP)-based WPC. The opposite behavior occurs at higher wood contents due to the different shear thinning behavior. Slightly decreased wood contents could be observed at the beginning of the flow path and greatly increased wood contents at the end of the flow path, compared to the starting material. When using the plate cavity, flow anomalies in the form of free jets occur as a function of the wood content, with TPU exhibiting the more critical behavior. The flow front is frayed, but in contrast to the flow spiral, no significant wood accumulation could be detected due to the shorter flow path lengths.</jats:p>"}],"keyword":["Engineering (miscellaneous)","Ceramics and Composites"],"language":[{"iso":"eng"}]},{"has_accepted_license":"1","quality_controlled":"1","year":"2022","citation":{"ama":"Bothe M, Hami Dindar I, Lutters N, Kenig EY. Dynamic modeling of absorption/desorption closed-loop including periphery. <i>Computers and Chemical Engineering</i>. Published online 2022.","chicago":"Bothe, Mike, Iman Hami Dindar, Nicole Lutters, and Eugeny Y. Kenig. “Dynamic Modeling of Absorption/Desorption Closed-Loop Including Periphery.” <i>Computers and Chemical Engineering</i>, 2022.","ieee":"M. Bothe, I. Hami Dindar, N. Lutters, and E. Y. Kenig, “Dynamic modeling of absorption/desorption closed-loop including periphery,” <i>Computers and Chemical Engineering</i>, 2022.","apa":"Bothe, M., Hami Dindar, I., Lutters, N., &#38; Kenig, E. Y. (2022). Dynamic modeling of absorption/desorption closed-loop including periphery. <i>Computers and Chemical Engineering</i>.","short":"M. Bothe, I. Hami Dindar, N. Lutters, E.Y. Kenig, Computers and Chemical Engineering (2022).","mla":"Bothe, Mike, et al. “Dynamic Modeling of Absorption/Desorption Closed-Loop Including Periphery.” <i>Computers and Chemical Engineering</i>, Elsevier, 2022.","bibtex":"@article{Bothe_Hami Dindar_Lutters_Kenig_2022, title={Dynamic modeling of absorption/desorption closed-loop including periphery}, journal={Computers and Chemical Engineering}, publisher={Elsevier}, author={Bothe, Mike and Hami Dindar, Iman and Lutters, Nicole and Kenig, Eugeny Y.}, year={2022} }"},"publisher":"Elsevier","date_updated":"2023-04-26T13:50:38Z","oa":"1","date_created":"2022-09-23T09:12:14Z","author":[{"id":"72973","full_name":"Bothe, Mike","last_name":"Bothe","first_name":"Mike"},{"first_name":"Iman","id":"54836","full_name":"Hami Dindar, Iman","last_name":"Hami Dindar"},{"first_name":"Nicole","last_name":"Lutters","id":"22006","full_name":"Lutters, Nicole"},{"first_name":"Eugeny Y.","full_name":"Kenig, Eugeny Y.","id":"665","last_name":"Kenig"}],"title":"Dynamic modeling of absorption/desorption closed-loop including periphery","type":"journal_article","publication":"Computers and Chemical Engineering","file":[{"content_type":"application/pdf","relation":"main_file","creator":"bothem","date_created":"2022-09-23T09:12:06Z","date_updated":"2022-09-23T09:12:06Z","file_name":"Dynamic modeling of absorption desorption closed loop including periphery.pdf","file_id":"33478","access_level":"open_access","file_size":5424798}],"status":"public","_id":"33477","user_id":"22006","department":[{"_id":"9"},{"_id":"145"}],"ddc":["000"],"file_date_updated":"2022-09-23T09:12:06Z","language":[{"iso":"eng"}]},{"department":[{"_id":"11"},{"_id":"137"}],"user_id":"14931","_id":"43137","language":[{"iso":"ger"}],"publication":"Handbuch Medienpädagogik.","type":"book_chapter","status":"public","editor":[{"full_name":"Sander, Uwe","last_name":"Sander","first_name":"Uwe"},{"last_name":"von Gross","full_name":"von Gross, Friederike","first_name":"Friederike"},{"first_name":"Kai-Uwe ","last_name":"Hugger","full_name":"Hugger, Kai-Uwe "}],"date_created":"2023-03-28T20:36:24Z","author":[{"first_name":"Dorothee M.","full_name":"Meister, Dorothee M.","id":"346","last_name":"Meister"},{"first_name":"Lukas","full_name":"Dehmel, Lukas","id":"72044","last_name":"Dehmel"}],"publisher":"Springer VS","date_updated":"2023-04-26T14:38:58Z","doi":"https://doi.org/10.1007/978-3-658-23578-9_98","title":"Institutionen der Medienpädagogik. Erwachsenen- und Weiterbildung","publication_status":"published","page":"871-878","citation":{"apa":"Meister, D. M., &#38; Dehmel, L. (2022). Institutionen der Medienpädagogik. Erwachsenen- und Weiterbildung. In U. Sander, F. von Gross, &#38; K.-U. Hugger (Eds.), <i>Handbuch Medienpädagogik.</i> (pp. 871–878). Springer VS. <a href=\"https://doi.org/10.1007/978-3-658-23578-9_98\">https://doi.org/10.1007/978-3-658-23578-9_98</a>","short":"D.M. Meister, L. Dehmel, in: U. Sander, F. von Gross, K.-U. Hugger (Eds.), Handbuch Medienpädagogik., Springer VS, Wiesbaden, 2022, pp. 871–878.","bibtex":"@inbook{Meister_Dehmel_2022, place={Wiesbaden}, title={Institutionen der Medienpädagogik. Erwachsenen- und Weiterbildung}, DOI={<a href=\"https://doi.org/10.1007/978-3-658-23578-9_98\">https://doi.org/10.1007/978-3-658-23578-9_98</a>}, booktitle={Handbuch Medienpädagogik.}, publisher={Springer VS}, author={Meister, Dorothee M. and Dehmel, Lukas}, editor={Sander, Uwe and von Gross, Friederike and Hugger, Kai-Uwe }, year={2022}, pages={871–878} }","mla":"Meister, Dorothee M., and Lukas Dehmel. “Institutionen der Medienpädagogik. Erwachsenen- und Weiterbildung.” <i>Handbuch Medienpädagogik.</i>, edited by Uwe Sander et al., Springer VS, 2022, pp. 871–78, doi:<a href=\"https://doi.org/10.1007/978-3-658-23578-9_98\">https://doi.org/10.1007/978-3-658-23578-9_98</a>.","ama":"Meister DM, Dehmel L. Institutionen der Medienpädagogik. Erwachsenen- und Weiterbildung. In: Sander U, von Gross F, Hugger K-U, eds. <i>Handbuch Medienpädagogik.</i> Springer VS; 2022:871-878. doi:<a href=\"https://doi.org/10.1007/978-3-658-23578-9_98\">https://doi.org/10.1007/978-3-658-23578-9_98</a>","chicago":"Meister, Dorothee M., and Lukas Dehmel. “Institutionen der Medienpädagogik. Erwachsenen- und Weiterbildung.” In <i>Handbuch Medienpädagogik.</i>, edited by Uwe Sander, Friederike von Gross, and Kai-Uwe  Hugger, 871–78. Wiesbaden: Springer VS, 2022. <a href=\"https://doi.org/10.1007/978-3-658-23578-9_98\">https://doi.org/10.1007/978-3-658-23578-9_98</a>.","ieee":"D. M. Meister and L. Dehmel, “Institutionen der Medienpädagogik. Erwachsenen- und Weiterbildung,” in <i>Handbuch Medienpädagogik.</i>, U. Sander, F. von Gross, and K.-U. Hugger, Eds. Wiesbaden: Springer VS, 2022, pp. 871–878."},"place":"Wiesbaden","year":"2022"},{"keyword":["Industrial and Manufacturing Engineering","Mechanical Engineering"],"language":[{"iso":"eng"}],"project":[{"grant_number":"418701707","_id":"130","name":"TRR 285: TRR 285"},{"name":"TRR 285 - C: TRR 285 - Project Area C","_id":"133"},{"name":"TRR 285 – C02: TRR 285 - Subproject C02","_id":"146"}],"_id":"34241","user_id":"7850","department":[{"_id":"157"},{"_id":"630"}],"abstract":[{"lang":"eng","text":"Due to the increasing use of multi-material constructions and the resulting material incompatibilities, mechanical joining technologies are gaining in importance. The reasons for this are the variety of joining possibilities as well as high load-bearing capacities. However, the currently rigid tooling systems cannot react to changing boundary conditions, such as changed sheet thicknesses or strength. For this reason, a large number of specialised joining processes have been developed to expand the range of applications. Using a versatile self-piercing riveting process, multi-material structures are joined in this paper. In this process, a modified tool actuator technology is combined with multi-range capable auxiliary joining parts. The multi-range capability of the rivets is achieved by forming the rivet head onto the respective thickness of the joining part combination without creating a tooling set-up effort. The joints are investigated both experimentally on the basis of joint formation and load-bearing capacity tests as well as by means of numerical simulation. It turned out that all the joints examined could be manufactured according to the defined standards. The load-bearing capacities of the joints are comparable to those of conventionally joined joints. In some cases the joint fails prematurely, which is why lower energy absorptions are obtained. However, the maximum forces achieved are higher than those of conventional joints. Especially in the case of high-strength materials arranged on the die side, the interlock formation is low. In addition, the use of die-sided sheets requires a large deformation of the rivet head protrusion, which leads to an increase in stress and, as a result, to damage if the rivet head. However, a negative influence on the joint load-bearing capacity could be excluded.</jats:p>"}],"status":"public","type":"journal_article","publication":"Production Engineering","title":"Joining of multi-material structures using a versatile self-piercing riveting process","doi":"10.1007/s11740-022-01151-w","date_updated":"2023-04-27T07:53:58Z","publisher":"Springer Science and Business Media LLC","date_created":"2022-12-06T13:50:06Z","author":[{"full_name":"Kappe, Fabian","id":"66459","last_name":"Kappe","first_name":"Fabian"},{"last_name":"Wituschek","full_name":"Wituschek, Simon","first_name":"Simon"},{"first_name":"Mathias","id":"7850","full_name":"Bobbert, Mathias","last_name":"Bobbert"},{"first_name":"Michael","full_name":"Lechner, Michael","last_name":"Lechner"},{"first_name":"Gerson","last_name":"Meschut","orcid":"0000-0002-2763-1246","id":"32056","full_name":"Meschut, Gerson"}],"year":"2022","citation":{"apa":"Kappe, F., Wituschek, S., Bobbert, M., Lechner, M., &#38; Meschut, G. (2022). Joining of multi-material structures using a versatile self-piercing riveting process. <i>Production Engineering</i>. <a href=\"https://doi.org/10.1007/s11740-022-01151-w\">https://doi.org/10.1007/s11740-022-01151-w</a>","bibtex":"@article{Kappe_Wituschek_Bobbert_Lechner_Meschut_2022, title={Joining of multi-material structures using a versatile self-piercing riveting process}, DOI={<a href=\"https://doi.org/10.1007/s11740-022-01151-w\">10.1007/s11740-022-01151-w</a>}, journal={Production Engineering}, publisher={Springer Science and Business Media LLC}, author={Kappe, Fabian and Wituschek, Simon and Bobbert, Mathias and Lechner, Michael and Meschut, Gerson}, year={2022} }","mla":"Kappe, Fabian, et al. “Joining of Multi-Material Structures Using a Versatile Self-Piercing Riveting Process.” <i>Production Engineering</i>, Springer Science and Business Media LLC, 2022, doi:<a href=\"https://doi.org/10.1007/s11740-022-01151-w\">10.1007/s11740-022-01151-w</a>.","short":"F. Kappe, S. Wituschek, M. Bobbert, M. Lechner, G. Meschut, Production Engineering (2022).","ama":"Kappe F, Wituschek S, Bobbert M, Lechner M, Meschut G. Joining of multi-material structures using a versatile self-piercing riveting process. <i>Production Engineering</i>. Published online 2022. doi:<a href=\"https://doi.org/10.1007/s11740-022-01151-w\">10.1007/s11740-022-01151-w</a>","ieee":"F. Kappe, S. Wituschek, M. Bobbert, M. Lechner, and G. Meschut, “Joining of multi-material structures using a versatile self-piercing riveting process,” <i>Production Engineering</i>, 2022, doi: <a href=\"https://doi.org/10.1007/s11740-022-01151-w\">10.1007/s11740-022-01151-w</a>.","chicago":"Kappe, Fabian, Simon Wituschek, Mathias Bobbert, Michael Lechner, and Gerson Meschut. “Joining of Multi-Material Structures Using a Versatile Self-Piercing Riveting Process.” <i>Production Engineering</i>, 2022. <a href=\"https://doi.org/10.1007/s11740-022-01151-w\">https://doi.org/10.1007/s11740-022-01151-w</a>."},"publication_status":"published","quality_controlled":"1","publication_identifier":{"issn":["0944-6524","1863-7353"]}},{"department":[{"_id":"157"}],"user_id":"7850","_id":"30100","project":[{"grant_number":"418701707","name":"TRR 285: TRR 285","_id":"130"},{"name":"TRR 285 - B: TRR 285 - Project Area B","_id":"132"},{"name":"TRR 285 – B05: TRR 285 - Subproject B05","_id":"144"},{"_id":"133","name":"TRR 285 - C: TRR 285 - Project Area C"},{"name":"TRR 285 – C01: TRR 285 - Subproject C01","_id":"145"},{"name":"TRR 285 - A: TRR 285 - Project Area A","_id":"131"},{"_id":"135","name":"TRR 285 – A01: TRR 285 - Subproject A01"}],"language":[{"iso":"eng"}],"keyword":["Industrial and Manufacturing Engineering","Mechanical Engineering"],"publication":"Production Engineering","type":"journal_article","status":"public","abstract":[{"text":"Since the application of mechanical joining methods, such as clinching or riveting, offers a robust solution for the generation of advanced multi-material connections, the use in the field of lightweight designs (e.g. automotive industry) is steadily increasing. Therefore, not only the design of an individual joint is required but also the dimensioning of the entire joining connection is crucial. However, in comparison to thermal joining techniques, such as spot welding, the evaluation of the joints’ resistance against defined requirements (e.g. types of load, minimal amount of load cycles) mainly relies on the consideration of expert knowledge, a few design principles and a small amount of experimental data. Since this generally implies the involvement of several domains, such as the material characterization or the part design, a tremendous amount of data and knowledge is separately generated for a certain dimensioning process. Nevertheless, the lack of formalization and standardization in representing the gained knowledge leads to a difficult and inconsistent reuse, sharing or searching of already existing information. Thus, this contribution presents a specific ontology for the provision of cross-domain knowledge about mechanical joining processes and highlights two potential use cases of this ontology in the design of clinched and pin joints.</jats:p>","lang":"eng"}],"date_created":"2022-02-25T07:19:45Z","author":[{"first_name":"Christoph","full_name":"Zirngibl, Christoph","last_name":"Zirngibl"},{"first_name":"Patricia","full_name":"Kügler, Patricia","last_name":"Kügler"},{"first_name":"Julian","last_name":"Popp","full_name":"Popp, Julian"},{"last_name":"Bielak","full_name":"Bielak, Christian Roman","id":"34782","first_name":"Christian Roman"},{"last_name":"Bobbert","id":"7850","full_name":"Bobbert, Mathias","first_name":"Mathias"},{"first_name":"Dietmar","full_name":"Drummer, Dietmar","last_name":"Drummer"},{"first_name":"Gerson","id":"32056","full_name":"Meschut, Gerson","last_name":"Meschut","orcid":"0000-0002-2763-1246"},{"first_name":"Sandro","full_name":"Wartzack, Sandro","last_name":"Wartzack"},{"first_name":"Benjamin","last_name":"Schleich","full_name":"Schleich, Benjamin"}],"date_updated":"2023-04-27T07:42:19Z","publisher":"Springer Science and Business Media LLC","doi":"10.1007/s11740-022-01117-y","title":"Provision of cross-domain knowledge in mechanical joining using ontologies","quality_controlled":"1","publication_identifier":{"issn":["0944-6524","1863-7353"]},"publication_status":"published","citation":{"ieee":"C. Zirngibl <i>et al.</i>, “Provision of cross-domain knowledge in mechanical joining using ontologies,” <i>Production Engineering</i>, 2022, doi: <a href=\"https://doi.org/10.1007/s11740-022-01117-y\">10.1007/s11740-022-01117-y</a>.","chicago":"Zirngibl, Christoph, Patricia Kügler, Julian Popp, Christian Roman Bielak, Mathias Bobbert, Dietmar Drummer, Gerson Meschut, Sandro Wartzack, and Benjamin Schleich. “Provision of Cross-Domain Knowledge in Mechanical Joining Using Ontologies.” <i>Production Engineering</i>, 2022. <a href=\"https://doi.org/10.1007/s11740-022-01117-y\">https://doi.org/10.1007/s11740-022-01117-y</a>.","ama":"Zirngibl C, Kügler P, Popp J, et al. Provision of cross-domain knowledge in mechanical joining using ontologies. <i>Production Engineering</i>. Published online 2022. doi:<a href=\"https://doi.org/10.1007/s11740-022-01117-y\">10.1007/s11740-022-01117-y</a>","apa":"Zirngibl, C., Kügler, P., Popp, J., Bielak, C. R., Bobbert, M., Drummer, D., Meschut, G., Wartzack, S., &#38; Schleich, B. (2022). Provision of cross-domain knowledge in mechanical joining using ontologies. <i>Production Engineering</i>. <a href=\"https://doi.org/10.1007/s11740-022-01117-y\">https://doi.org/10.1007/s11740-022-01117-y</a>","mla":"Zirngibl, Christoph, et al. “Provision of Cross-Domain Knowledge in Mechanical Joining Using Ontologies.” <i>Production Engineering</i>, Springer Science and Business Media LLC, 2022, doi:<a href=\"https://doi.org/10.1007/s11740-022-01117-y\">10.1007/s11740-022-01117-y</a>.","bibtex":"@article{Zirngibl_Kügler_Popp_Bielak_Bobbert_Drummer_Meschut_Wartzack_Schleich_2022, title={Provision of cross-domain knowledge in mechanical joining using ontologies}, DOI={<a href=\"https://doi.org/10.1007/s11740-022-01117-y\">10.1007/s11740-022-01117-y</a>}, journal={Production Engineering}, publisher={Springer Science and Business Media LLC}, author={Zirngibl, Christoph and Kügler, Patricia and Popp, Julian and Bielak, Christian Roman and Bobbert, Mathias and Drummer, Dietmar and Meschut, Gerson and Wartzack, Sandro and Schleich, Benjamin}, year={2022} }","short":"C. Zirngibl, P. Kügler, J. Popp, C.R. Bielak, M. Bobbert, D. Drummer, G. Meschut, S. Wartzack, B. Schleich, Production Engineering (2022)."},"year":"2022"},{"publication":"Production Engineering","type":"journal_article","status":"public","abstract":[{"lang":"eng","text":"Lightweight design is an effective lever for achieving fuel consumption and emission-oriented goals. Therefore micro-alloyed steels and high-strength aluminium materials are included in the multi-material mix of the car body. In this context self-pierce riveting has become established for joining in body-in-white production. For the dimensioning of the joint, numerical simulation is increasingly being used. In order to make reliable predictions about joint quality, knowledge of the friction in the joining process is necessary and needs to be identified experimentally. In previous investigations, the process parameters in the friction test were not comparable to the joining process. Therefore, a new friction test method is presented in this paper, where the process conditions are comparable between joining and friction testing especially regarding the interface pressure. The local joining process parameters between rivet and sheet are derived numerically. In the framework of the investigations, the influences of the local joining process parameters, like interface pressure, relative velocity and temperature, on the friction are investigated and mapped close to the joining process. Additionally a comparison of different rivet coatings is carried out. The rivet contact to the sheet metal HX340LAD as well with aluminium EN AW-5182 is taken into account."}],"department":[{"_id":"157"}],"user_id":"7850","_id":"30884","language":[{"iso":"eng"}],"article_type":"original","quality_controlled":"1","citation":{"mla":"Rossel, Moritz Sebastian, and Gerson Meschut. “Investigation of the Friction Conditions of Self-Pierce Rivets by Means of a Compression-Torsion Tribometer.” <i>Production Engineering</i>, 2022, doi:<a href=\"https://doi.org/10.1007/s11740-022-01126-x\">https://doi.org/10.1007/s11740-022-01126-x</a>.","short":"M.S. Rossel, G. Meschut, Production Engineering (2022).","bibtex":"@article{Rossel_Meschut_2022, title={Investigation of the friction conditions of self-pierce rivets by means of a compression-torsion tribometer}, DOI={<a href=\"https://doi.org/10.1007/s11740-022-01126-x\">https://doi.org/10.1007/s11740-022-01126-x</a>}, journal={Production Engineering}, author={Rossel, Moritz Sebastian and Meschut, Gerson}, year={2022} }","apa":"Rossel, M. S., &#38; Meschut, G. (2022). Investigation of the friction conditions of self-pierce rivets by means of a compression-torsion tribometer. <i>Production Engineering</i>. <a href=\"https://doi.org/10.1007/s11740-022-01126-x\">https://doi.org/10.1007/s11740-022-01126-x</a>","ama":"Rossel MS, Meschut G. Investigation of the friction conditions of self-pierce rivets by means of a compression-torsion tribometer. <i>Production Engineering</i>. Published online 2022. doi:<a href=\"https://doi.org/10.1007/s11740-022-01126-x\">https://doi.org/10.1007/s11740-022-01126-x</a>","chicago":"Rossel, Moritz Sebastian, and Gerson Meschut. “Investigation of the Friction Conditions of Self-Pierce Rivets by Means of a Compression-Torsion Tribometer.” <i>Production Engineering</i>, 2022. <a href=\"https://doi.org/10.1007/s11740-022-01126-x\">https://doi.org/10.1007/s11740-022-01126-x</a>.","ieee":"M. S. Rossel and G. Meschut, “Investigation of the friction conditions of self-pierce rivets by means of a compression-torsion tribometer,” <i>Production Engineering</i>, 2022, doi: <a href=\"https://doi.org/10.1007/s11740-022-01126-x\">https://doi.org/10.1007/s11740-022-01126-x</a>."},"year":"2022","author":[{"last_name":"Rossel","full_name":"Rossel, Moritz Sebastian","id":"44503","first_name":"Moritz Sebastian"},{"id":"32056","full_name":"Meschut, Gerson","orcid":"0000-0002-2763-1246","last_name":"Meschut","first_name":"Gerson"}],"date_created":"2022-04-13T09:03:12Z","date_updated":"2023-04-27T07:39:56Z","doi":"https://doi.org/10.1007/s11740-022-01126-x","title":"Investigation of the friction conditions of self-pierce rivets by means of a compression-torsion tribometer"},{"author":[{"first_name":"Fabian","full_name":"Kappe, Fabian","id":"66459","last_name":"Kappe"},{"first_name":"Simon","last_name":"Wituschek","full_name":"Wituschek, Simon"},{"last_name":"de Pascalis","full_name":"de Pascalis, Vincenzo","first_name":"Vincenzo"},{"first_name":"Mathias","full_name":"Bobbert, Mathias","id":"7850","last_name":"Bobbert"},{"first_name":"Michael","last_name":"Lechner","full_name":"Lechner, Michael"},{"first_name":"Gerson","orcid":"0000-0002-2763-1246","last_name":"Meschut","full_name":"Meschut, Gerson","id":"32056"}],"date_created":"2022-12-07T15:21:45Z","publisher":"Springer International Publishing","date_updated":"2023-04-27T08:53:09Z","doi":"10.1007/978-3-031-18130-6_10","title":"Numerical Investigation of the Influence of a Movable Die Base on Joint Formation in Semi-tubular Self-piercing Riveting","publication_status":"published","publication_identifier":{"issn":["1869-8433","1869-8441"],"isbn":["9783031181290","9783031181306"]},"quality_controlled":"1","citation":{"apa":"Kappe, F., Wituschek, S., de Pascalis, V., Bobbert, M., Lechner, M., &#38; Meschut, G. (2022). Numerical Investigation of the Influence of a Movable Die Base on Joint Formation in Semi-tubular Self-piercing Riveting. In <i>Materials Design and Applications IV</i>. Springer International Publishing. <a href=\"https://doi.org/10.1007/978-3-031-18130-6_10\">https://doi.org/10.1007/978-3-031-18130-6_10</a>","short":"F. Kappe, S. Wituschek, V. de Pascalis, M. Bobbert, M. Lechner, G. Meschut, in: Materials Design and Applications IV, Springer International Publishing, Cham, 2022.","bibtex":"@inbook{Kappe_Wituschek_de Pascalis_Bobbert_Lechner_Meschut_2022, place={Cham}, title={Numerical Investigation of the Influence of a Movable Die Base on Joint Formation in Semi-tubular Self-piercing Riveting}, DOI={<a href=\"https://doi.org/10.1007/978-3-031-18130-6_10\">10.1007/978-3-031-18130-6_10</a>}, booktitle={Materials Design and Applications IV}, publisher={Springer International Publishing}, author={Kappe, Fabian and Wituschek, Simon and de Pascalis, Vincenzo and Bobbert, Mathias and Lechner, Michael and Meschut, Gerson}, year={2022} }","mla":"Kappe, Fabian, et al. “Numerical Investigation of the Influence of a Movable Die Base on Joint Formation in Semi-Tubular Self-Piercing Riveting.” <i>Materials Design and Applications IV</i>, Springer International Publishing, 2022, doi:<a href=\"https://doi.org/10.1007/978-3-031-18130-6_10\">10.1007/978-3-031-18130-6_10</a>.","chicago":"Kappe, Fabian, Simon Wituschek, Vincenzo de Pascalis, Mathias Bobbert, Michael Lechner, and Gerson Meschut. “Numerical Investigation of the Influence of a Movable Die Base on Joint Formation in Semi-Tubular Self-Piercing Riveting.” In <i>Materials Design and Applications IV</i>. Cham: Springer International Publishing, 2022. <a href=\"https://doi.org/10.1007/978-3-031-18130-6_10\">https://doi.org/10.1007/978-3-031-18130-6_10</a>.","ieee":"F. Kappe, S. Wituschek, V. de Pascalis, M. Bobbert, M. Lechner, and G. Meschut, “Numerical Investigation of the Influence of a Movable Die Base on Joint Formation in Semi-tubular Self-piercing Riveting,” in <i>Materials Design and Applications IV</i>, Cham: Springer International Publishing, 2022.","ama":"Kappe F, Wituschek S, de Pascalis V, Bobbert M, Lechner M, Meschut G. Numerical Investigation of the Influence of a Movable Die Base on Joint Formation in Semi-tubular Self-piercing Riveting. In: <i>Materials Design and Applications IV</i>. Springer International Publishing; 2022. doi:<a href=\"https://doi.org/10.1007/978-3-031-18130-6_10\">10.1007/978-3-031-18130-6_10</a>"},"place":"Cham","year":"2022","user_id":"66459","department":[{"_id":"630"},{"_id":"157"}],"project":[{"grant_number":"418701707","name":"TRR 285: TRR 285","_id":"130"},{"_id":"133","name":"TRR 285 - C: TRR 285 - Project Area C"},{"name":"TRR 285 – C02: TRR 285 - Subproject C02","_id":"146"}],"_id":"34275","language":[{"iso":"eng"}],"type":"book_chapter","publication":"Materials Design and Applications IV","status":"public","abstract":[{"lang":"eng","text":"Due to economic and ecological requirements and the associated trend towards lightweight construction, mechanical joining technologies like self-piercing riveting are gaining in importance. In addition, the increase in lightweight multi-material joints has led to the development of many different mechanical joining technologies which can only be applied to join a small number of material combinations. This leads to low process efficiency, and in the case of self-piercing riveting, to a large number of required tool changes. Another approach focuses on reacting to changing boundary conditions as well as the creation of customised joints by using adaptive tools, versatile auxiliary joining parts or modified process kinematics. Therefore, this study investigates the influence of increased die-sided kinematics on joint formation in self-piercing riveting process. The aim is to achieve an improvement of the joint properties by superimposing the punch feed. Furthermore, it is intended to reduce required tool changes due to the improved joint design. The investigations were carried out by means of a 2D-axisymmetric numerical simulation model using the LS-Dyna simulation software. After the validation of the process model, the die was extended to include driven die elements. Using the model, different kinematics as well as their effects on the joint formation and the internal stress concentration could be analysed. In principle, the increased actuator technology enabled an increase of the interlock formation for both pure aluminium and multi-material joints consisting of steel and aluminium. However, the resulting process forces were higher during the process phases of punching and spreading."}]},{"user_id":"66459","department":[{"_id":"157"},{"_id":"630"}],"project":[{"_id":"130","name":"TRR 285: TRR 285","grant_number":"418701707"},{"_id":"133","name":"TRR 285 - C: TRR 285 - Project Area C"},{"name":"TRR 285 – C02: TRR 285 - Subproject C02","_id":"146"},{"name":"TRR 285 - B: TRR 285 - Project Area B","_id":"132"},{"name":"TRR 285 – B05: TRR 285 - Subproject B05","_id":"144"}],"_id":"34244","language":[{"iso":"eng"}],"keyword":["Industrial and Manufacturing Engineering","Management Science and Operations Research","Strategy and Management"],"type":"journal_article","publication":"Journal of Manufacturing Processes","status":"public","author":[{"full_name":"Kappe, Fabian","last_name":"Kappe","first_name":"Fabian"},{"full_name":"Zirngibl, Christoph","last_name":"Zirngibl","first_name":"Christoph"},{"last_name":"Schleich","full_name":"Schleich, Benjamin","first_name":"Benjamin"},{"full_name":"Bobbert, Mathias","last_name":"Bobbert","first_name":"Mathias"},{"first_name":"Sandro","last_name":"Wartzack","full_name":"Wartzack, Sandro"},{"first_name":"Gerson","last_name":"Meschut","full_name":"Meschut, Gerson"}],"date_created":"2022-12-06T13:57:46Z","volume":84,"publisher":"Elsevier BV","date_updated":"2023-04-27T08:53:36Z","doi":"10.1016/j.jmapro.2022.11.019","title":"Determining the influence of different process parameters on the versatile self-piercing riveting process using numerical methods","publication_status":"published","quality_controlled":"1","publication_identifier":{"issn":["1526-6125"]},"citation":{"ieee":"F. Kappe, C. Zirngibl, B. Schleich, M. Bobbert, S. Wartzack, and G. Meschut, “Determining the influence of different process parameters on the versatile self-piercing riveting process using numerical methods,” <i>Journal of Manufacturing Processes</i>, vol. 84, pp. 1438–1448, 2022, doi: <a href=\"https://doi.org/10.1016/j.jmapro.2022.11.019\">10.1016/j.jmapro.2022.11.019</a>.","chicago":"Kappe, Fabian, Christoph Zirngibl, Benjamin Schleich, Mathias Bobbert, Sandro Wartzack, and Gerson Meschut. “Determining the Influence of Different Process Parameters on the Versatile Self-Piercing Riveting Process Using Numerical Methods.” <i>Journal of Manufacturing Processes</i> 84 (2022): 1438–48. <a href=\"https://doi.org/10.1016/j.jmapro.2022.11.019\">https://doi.org/10.1016/j.jmapro.2022.11.019</a>.","ama":"Kappe F, Zirngibl C, Schleich B, Bobbert M, Wartzack S, Meschut G. Determining the influence of different process parameters on the versatile self-piercing riveting process using numerical methods. <i>Journal of Manufacturing Processes</i>. 2022;84:1438-1448. doi:<a href=\"https://doi.org/10.1016/j.jmapro.2022.11.019\">10.1016/j.jmapro.2022.11.019</a>","mla":"Kappe, Fabian, et al. “Determining the Influence of Different Process Parameters on the Versatile Self-Piercing Riveting Process Using Numerical Methods.” <i>Journal of Manufacturing Processes</i>, vol. 84, Elsevier BV, 2022, pp. 1438–48, doi:<a href=\"https://doi.org/10.1016/j.jmapro.2022.11.019\">10.1016/j.jmapro.2022.11.019</a>.","short":"F. Kappe, C. Zirngibl, B. Schleich, M. Bobbert, S. Wartzack, G. Meschut, Journal of Manufacturing Processes 84 (2022) 1438–1448.","bibtex":"@article{Kappe_Zirngibl_Schleich_Bobbert_Wartzack_Meschut_2022, title={Determining the influence of different process parameters on the versatile self-piercing riveting process using numerical methods}, volume={84}, DOI={<a href=\"https://doi.org/10.1016/j.jmapro.2022.11.019\">10.1016/j.jmapro.2022.11.019</a>}, journal={Journal of Manufacturing Processes}, publisher={Elsevier BV}, author={Kappe, Fabian and Zirngibl, Christoph and Schleich, Benjamin and Bobbert, Mathias and Wartzack, Sandro and Meschut, Gerson}, year={2022}, pages={1438–1448} }","apa":"Kappe, F., Zirngibl, C., Schleich, B., Bobbert, M., Wartzack, S., &#38; Meschut, G. (2022). Determining the influence of different process parameters on the versatile self-piercing riveting process using numerical methods. <i>Journal of Manufacturing Processes</i>, <i>84</i>, 1438–1448. <a href=\"https://doi.org/10.1016/j.jmapro.2022.11.019\">https://doi.org/10.1016/j.jmapro.2022.11.019</a>"},"page":"1438-1448","intvolume":"        84","year":"2022"},{"department":[{"_id":"157"},{"_id":"630"}],"user_id":"66459","_id":"29858","project":[{"name":"TRR 285: TRR 285","_id":"130","grant_number":"418701707"},{"name":"TRR 285 - C: TRR 285 - Project Area C","_id":"133"},{"name":"TRR 285 – C02: TRR 285 - Subproject C02","_id":"146"}],"language":[{"iso":"eng"}],"publication":"Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications","type":"journal_article","status":"public","author":[{"full_name":"Kappe, Fabian","id":"66459","last_name":"Kappe","first_name":"Fabian"},{"first_name":"Luca","last_name":"Schadow","full_name":"Schadow, Luca"},{"first_name":"Mathias","last_name":"Bobbert","id":"7850","full_name":"Bobbert, Mathias"},{"first_name":"Gerson","id":"32056","full_name":"Meschut, Gerson","last_name":"Meschut","orcid":"0000-0002-2763-1246"}],"date_created":"2022-02-16T09:50:09Z","date_updated":"2023-04-27T08:54:33Z","doi":"10.1177/14644207211070992","title":"Increasing flexibility of self-piercing riveting by reducing tool–geometry combinations using cluster analysis in the application of multi-material design","quality_controlled":"1","citation":{"ama":"Kappe F, Schadow L, Bobbert M, Meschut G. Increasing flexibility of self-piercing riveting by reducing tool–geometry combinations using cluster analysis in the application of multi-material design. <i>Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications</i>. Published online 2022. doi:<a href=\"https://doi.org/10.1177/14644207211070992\">10.1177/14644207211070992</a>","chicago":"Kappe, Fabian, Luca Schadow, Mathias Bobbert, and Gerson Meschut. “Increasing Flexibility of Self-Piercing Riveting by Reducing Tool–Geometry Combinations Using Cluster Analysis in the Application of Multi-Material Design.” <i>Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications</i>, 2022. <a href=\"https://doi.org/10.1177/14644207211070992\">https://doi.org/10.1177/14644207211070992</a>.","ieee":"F. Kappe, L. Schadow, M. Bobbert, and G. Meschut, “Increasing flexibility of self-piercing riveting by reducing tool–geometry combinations using cluster analysis in the application of multi-material design,” <i>Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications</i>, 2022, doi: <a href=\"https://doi.org/10.1177/14644207211070992\">10.1177/14644207211070992</a>.","apa":"Kappe, F., Schadow, L., Bobbert, M., &#38; Meschut, G. (2022). Increasing flexibility of self-piercing riveting by reducing tool–geometry combinations using cluster analysis in the application of multi-material design. <i>Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications</i>. <a href=\"https://doi.org/10.1177/14644207211070992\">https://doi.org/10.1177/14644207211070992</a>","mla":"Kappe, Fabian, et al. “Increasing Flexibility of Self-Piercing Riveting by Reducing Tool–Geometry Combinations Using Cluster Analysis in the Application of Multi-Material Design.” <i>Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications</i>, 2022, doi:<a href=\"https://doi.org/10.1177/14644207211070992\">10.1177/14644207211070992</a>.","short":"F. Kappe, L. Schadow, M. Bobbert, G. Meschut, Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications (2022).","bibtex":"@article{Kappe_Schadow_Bobbert_Meschut_2022, title={Increasing flexibility of self-piercing riveting by reducing tool–geometry combinations using cluster analysis in the application of multi-material design}, DOI={<a href=\"https://doi.org/10.1177/14644207211070992\">10.1177/14644207211070992</a>}, journal={Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications}, author={Kappe, Fabian and Schadow, Luca and Bobbert, Mathias and Meschut, Gerson}, year={2022} }"},"year":"2022"},{"citation":{"ama":"Kappe F, Wituschek S, Bobbert M, Meschut G. Determining the properties of multi‑range semi‑tubular self‑piercing riveted joints. <i>Production Engineering</i>. Published online 2022. doi:<a href=\"https://doi.org/10.1007/s11740-022-01105-2\">https://doi.org/10.1007/s11740-022-01105-2</a>","ieee":"F. Kappe, S. Wituschek, M. Bobbert, and G. Meschut, “Determining the properties of multi‑range semi‑tubular self‑piercing riveted joints,” <i>Production Engineering</i>, 2022, doi: <a href=\"https://doi.org/10.1007/s11740-022-01105-2\">https://doi.org/10.1007/s11740-022-01105-2</a>.","chicago":"Kappe, Fabian, Simon Wituschek, Mathias Bobbert, and Gerson Meschut. “Determining the Properties of Multi‑range Semi‑tubular Self‑piercing Riveted Joints.” <i>Production Engineering</i>, 2022. <a href=\"https://doi.org/10.1007/s11740-022-01105-2\">https://doi.org/10.1007/s11740-022-01105-2</a>.","bibtex":"@article{Kappe_Wituschek_Bobbert_Meschut_2022, title={Determining the properties of multi‑range semi‑tubular self‑piercing riveted joints}, DOI={<a href=\"https://doi.org/10.1007/s11740-022-01105-2\">https://doi.org/10.1007/s11740-022-01105-2</a>}, journal={Production Engineering}, author={Kappe, Fabian and Wituschek, Simon and Bobbert, Mathias and Meschut, Gerson}, year={2022} }","mla":"Kappe, Fabian, et al. “Determining the Properties of Multi‑range Semi‑tubular Self‑piercing Riveted Joints.” <i>Production Engineering</i>, 2022, doi:<a href=\"https://doi.org/10.1007/s11740-022-01105-2\">https://doi.org/10.1007/s11740-022-01105-2</a>.","short":"F. Kappe, S. Wituschek, M. Bobbert, G. Meschut, Production Engineering (2022).","apa":"Kappe, F., Wituschek, S., Bobbert, M., &#38; Meschut, G. (2022). Determining the properties of multi‑range semi‑tubular self‑piercing riveted joints. <i>Production Engineering</i>. <a href=\"https://doi.org/10.1007/s11740-022-01105-2\">https://doi.org/10.1007/s11740-022-01105-2</a>"},"year":"2022","quality_controlled":"1","doi":"https://doi.org/10.1007/s11740-022-01105-2","title":"Determining the properties of multi‑range semi‑tubular self‑piercing riveted joints","author":[{"first_name":"Fabian","last_name":"Kappe","full_name":"Kappe, Fabian","id":"66459"},{"last_name":"Wituschek","full_name":"Wituschek, Simon","first_name":"Simon"},{"full_name":"Bobbert, Mathias","id":"7850","last_name":"Bobbert","first_name":"Mathias"},{"full_name":"Meschut, Gerson","id":"32056","last_name":"Meschut","orcid":"0000-0002-2763-1246","first_name":"Gerson"}],"date_created":"2022-02-16T09:47:02Z","date_updated":"2023-04-27T08:54:21Z","status":"public","publication":"Production Engineering","type":"journal_article","language":[{"iso":"eng"}],"department":[{"_id":"157"},{"_id":"630"}],"user_id":"66459","_id":"29857","project":[{"grant_number":"418701707","_id":"130","name":"TRR 285: TRR 285"},{"name":"TRR 285 - C: TRR 285 - Project Area C","_id":"133"},{"name":"TRR 285 – C02: TRR 285 - Subproject C02","_id":"146"}]},{"status":"public","publication":"XXXIII ISPIM Innovation Conference Proceedings","type":"conference","language":[{"iso":"eng"}],"_id":"33892","department":[{"_id":"152"}],"user_id":"5905","year":"2022","place":"Copenhagen, Denmark","citation":{"chicago":"Gräßler, Iris, Alena Marie Tusek, Henrik Thiele, Daniel Preuß, Benedikt Grewe, and Michael Hieb. “Literature Study on the Potential of Artificial Intelligence in Scenario-Technique.” In <i>XXXIII ISPIM Innovation Conference Proceedings</i>. Copenhagen, Denmark:  LUT Scientific and Expertise Publications, 2022.","ieee":"I. Gräßler, A. M. Tusek, H. Thiele, D. Preuß, B. Grewe, and M. Hieb, “Literature study on the potential of Artificial Intelligence in Scenario-Technique,” presented at the XXXIII ISPIM Innovation Conference “Innovating in a Digital World,” Copenhagen, Denmark, 2022.","ama":"Gräßler I, Tusek AM, Thiele H, Preuß D, Grewe B, Hieb M. Literature study on the potential of Artificial Intelligence in Scenario-Technique. In: <i>XXXIII ISPIM Innovation Conference Proceedings</i>.  LUT Scientific and Expertise Publications; 2022.","mla":"Gräßler, Iris, et al. “Literature Study on the Potential of Artificial Intelligence in Scenario-Technique.” <i>XXXIII ISPIM Innovation Conference Proceedings</i>,  LUT Scientific and Expertise Publications, 2022.","bibtex":"@inproceedings{Gräßler_Tusek_Thiele_Preuß_Grewe_Hieb_2022, place={Copenhagen, Denmark}, title={Literature study on the potential of Artificial Intelligence in Scenario-Technique}, booktitle={XXXIII ISPIM Innovation Conference Proceedings}, publisher={ LUT Scientific and Expertise Publications}, author={Gräßler, Iris and Tusek, Alena Marie and Thiele, Henrik and Preuß, Daniel and Grewe, Benedikt and Hieb, Michael}, year={2022} }","short":"I. Gräßler, A.M. Tusek, H. Thiele, D. Preuß, B. Grewe, M. Hieb, in: XXXIII ISPIM Innovation Conference Proceedings,  LUT Scientific and Expertise Publications, Copenhagen, Denmark, 2022.","apa":"Gräßler, I., Tusek, A. M., Thiele, H., Preuß, D., Grewe, B., &#38; Hieb, M. (2022). Literature study on the potential of Artificial Intelligence in Scenario-Technique. <i>XXXIII ISPIM Innovation Conference Proceedings</i>. XXXIII ISPIM Innovation Conference “Innovating in a Digital World,” Copenhagen, Denmark."},"publication_identifier":{"isbn":["978-952-335-694-8"]},"quality_controlled":"1","publication_status":"published","title":"Literature study on the potential of Artificial Intelligence in Scenario-Technique","conference":{"start_date":"2022-06-05","name":"XXXIII ISPIM Innovation Conference \"Innovating in a Digital World\"","location":"Copenhagen, Denmark","end_date":"2022-06-08"},"date_updated":"2023-04-27T09:45:41Z","publisher":" LUT Scientific and Expertise Publications","date_created":"2022-10-27T10:00:13Z","author":[{"first_name":"Iris","last_name":"Gräßler","orcid":"0000-0001-5765-971X","id":"47565","full_name":"Gräßler, Iris"},{"full_name":"Tusek, Alena Marie","id":"59370","last_name":"Tusek","first_name":"Alena Marie"},{"full_name":"Thiele, Henrik","id":"33419","last_name":"Thiele","first_name":"Henrik"},{"first_name":"Daniel","id":"40253","full_name":"Preuß, Daniel","last_name":"Preuß"},{"id":"52359","full_name":"Grewe, Benedikt","last_name":"Grewe","first_name":"Benedikt"},{"last_name":"Hieb","id":"72252","full_name":"Hieb, Michael","first_name":"Michael"}]},{"publication":"Computer Methods in Applied Mechanics and Engineering","keyword":["Computer Science Applications","General Physics and Astronomy","Mechanical Engineering","Mechanics of Materials","Computational Mechanics"],"language":[{"iso":"eng"}],"year":"2022","quality_controlled":"1","title":"NTFA-enabled goal-oriented adaptive space–time finite elements for micro-heterogeneous elastoplasticity problems","publisher":"Elsevier BV","date_created":"2022-08-08T13:09:53Z","status":"public","type":"journal_article","article_number":"115199","_id":"32592","department":[{"_id":"9"},{"_id":"154"},{"_id":"321"}],"user_id":"335","intvolume":"       398","citation":{"chicago":"Ju, X., Rolf Mahnken, Y. Xu, and L. Liang. “NTFA-Enabled Goal-Oriented Adaptive Space–Time Finite Elements for Micro-Heterogeneous Elastoplasticity Problems.” <i>Computer Methods in Applied Mechanics and Engineering</i> 398 (2022). <a href=\"https://doi.org/10.1016/j.cma.2022.115199\">https://doi.org/10.1016/j.cma.2022.115199</a>.","ieee":"X. Ju, R. Mahnken, Y. Xu, and L. Liang, “NTFA-enabled goal-oriented adaptive space–time finite elements for micro-heterogeneous elastoplasticity problems,” <i>Computer Methods in Applied Mechanics and Engineering</i>, vol. 398, Art. no. 115199, 2022, doi: <a href=\"https://doi.org/10.1016/j.cma.2022.115199\">10.1016/j.cma.2022.115199</a>.","ama":"Ju X, Mahnken R, Xu Y, Liang L. NTFA-enabled goal-oriented adaptive space–time finite elements for micro-heterogeneous elastoplasticity problems. <i>Computer Methods in Applied Mechanics and Engineering</i>. 2022;398. doi:<a href=\"https://doi.org/10.1016/j.cma.2022.115199\">10.1016/j.cma.2022.115199</a>","bibtex":"@article{Ju_Mahnken_Xu_Liang_2022, title={NTFA-enabled goal-oriented adaptive space–time finite elements for micro-heterogeneous elastoplasticity problems}, volume={398}, DOI={<a href=\"https://doi.org/10.1016/j.cma.2022.115199\">10.1016/j.cma.2022.115199</a>}, number={115199}, journal={Computer Methods in Applied Mechanics and Engineering}, publisher={Elsevier BV}, author={Ju, X. and Mahnken, Rolf and Xu, Y. and Liang, L.}, year={2022} }","short":"X. Ju, R. Mahnken, Y. Xu, L. Liang, Computer Methods in Applied Mechanics and Engineering 398 (2022).","mla":"Ju, X., et al. “NTFA-Enabled Goal-Oriented Adaptive Space–Time Finite Elements for Micro-Heterogeneous Elastoplasticity Problems.” <i>Computer Methods in Applied Mechanics and Engineering</i>, vol. 398, 115199, Elsevier BV, 2022, doi:<a href=\"https://doi.org/10.1016/j.cma.2022.115199\">10.1016/j.cma.2022.115199</a>.","apa":"Ju, X., Mahnken, R., Xu, Y., &#38; Liang, L. (2022). NTFA-enabled goal-oriented adaptive space–time finite elements for micro-heterogeneous elastoplasticity problems. <i>Computer Methods in Applied Mechanics and Engineering</i>, <i>398</i>, Article 115199. <a href=\"https://doi.org/10.1016/j.cma.2022.115199\">https://doi.org/10.1016/j.cma.2022.115199</a>"},"publication_identifier":{"issn":["0045-7825"]},"publication_status":"published","doi":"10.1016/j.cma.2022.115199","date_updated":"2023-04-27T10:04:01Z","volume":398,"author":[{"first_name":"X.","full_name":"Ju, X.","last_name":"Ju"},{"first_name":"Rolf","last_name":"Mahnken","id":"335","full_name":"Mahnken, Rolf"},{"last_name":"Xu","full_name":"Xu, Y.","first_name":"Y."},{"last_name":"Liang","full_name":"Liang, L.","first_name":"L."}]}]