---
_id: '18138'
abstract:
- lang: eng
text: Modern companies are nowadays confronted with an increasing demand of multiple
products, where they need to perform more flexible every day. Cost-intensive decisions
are to be confirmed in short times, in order to minimize risks and secure efficient
production programs as well as material flows. Tools for this digital planning
via simulation methods are one well established possibility to receive decision
support. Nevertheless, the creation of the necessary simulation models is a complicated
and error-prone process, where complexity of modeling, validation and verification
depends on the used tool and its functionalities. This paper presents implemented
concepts for an innovative user support in his tasks of verification and validation
of simulation models during the execution of a simulation run. Time-intensive
procedures like stopping simulation, parameterization and restarting within the
problem analysis are simplified. So the user is able to focus on the real problem
solving task.
author:
- first_name: Christoph
full_name: Laroque, Christoph
last_name: Laroque
- first_name: Matthias
full_name: Fischer, Matthias
id: '146'
last_name: Fischer
- first_name: Wilhelm
full_name: Dangelmaier, Wilhelm
last_name: Dangelmaier
citation:
ama: 'Laroque C, Fischer M, Dangelmaier W. Concepts for Model Verification and Validation
during Simulation Runtime. In: European Simulation and Modelling Conference
(ESM 2009). EUROSIS-ETI; 2009.'
apa: Laroque, C., Fischer, M., & Dangelmaier, W. (2009). Concepts for Model
Verification and Validation during Simulation Runtime. In European Simulation
and Modelling Conference (ESM 2009). EUROSIS-ETI.
bibtex: '@inproceedings{Laroque_Fischer_Dangelmaier_2009, title={Concepts for Model
Verification and Validation during Simulation Runtime}, booktitle={European Simulation
and Modelling Conference (ESM 2009)}, publisher={EUROSIS-ETI}, author={Laroque,
Christoph and Fischer, Matthias and Dangelmaier, Wilhelm}, year={2009} }'
chicago: Laroque, Christoph, Matthias Fischer, and Wilhelm Dangelmaier. “Concepts
for Model Verification and Validation during Simulation Runtime.” In European
Simulation and Modelling Conference (ESM 2009). EUROSIS-ETI, 2009.
ieee: C. Laroque, M. Fischer, and W. Dangelmaier, “Concepts for Model Verification
and Validation during Simulation Runtime,” in European Simulation and Modelling
Conference (ESM 2009), 2009.
mla: Laroque, Christoph, et al. “Concepts for Model Verification and Validation
during Simulation Runtime.” European Simulation and Modelling Conference (ESM
2009), EUROSIS-ETI, 2009.
short: 'C. Laroque, M. Fischer, W. Dangelmaier, in: European Simulation and Modelling
Conference (ESM 2009), EUROSIS-ETI, 2009.'
date_created: 2020-08-24T07:28:23Z
date_updated: 2022-01-06T06:53:26Z
department:
- _id: '63'
language:
- iso: eng
publication: European Simulation and Modelling Conference (ESM 2009)
publisher: EUROSIS-ETI
status: public
title: Concepts for Model Verification and Validation during Simulation Runtime
type: conference
user_id: '15415'
year: '2009'
...
---
_id: '18291'
author:
- first_name: Tim
full_name: Suess, Tim
last_name: Suess
- first_name: Matthias
full_name: Fischer, Matthias
id: '146'
last_name: Fischer
- first_name: Daniel
full_name: Huber, Daniel
last_name: Huber
- first_name: 'Christoph '
full_name: 'Laroque, Christoph '
last_name: Laroque
- first_name: Wilhelm
full_name: Dangelmaier, Wilhelm
last_name: Dangelmaier
citation:
ama: 'Suess T, Fischer M, Huber D, Laroque C, Dangelmaier W. Ein System zur aggregierten
Visualisierung verteilter Materialflusssimulationen. In: Augmented & Virtual
Reality in Der Produktentstehung. Vol 252. Verlagsschriftenreihe des Heinz
Nixdorf Instituts, Paderborn. Verlagsschriftenreihe des Heinz Nixdorf Instituts,
Paderborn; 2009:111--126.'
apa: Suess, T., Fischer, M., Huber, D., Laroque, C., & Dangelmaier, W. (2009).
Ein System zur aggregierten Visualisierung verteilter Materialflusssimulationen.
In Augmented & Virtual Reality in der Produktentstehung (Vol. 252,
pp. 111--126). Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn.
bibtex: '@inbook{Suess_Fischer_Huber_Laroque_Dangelmaier_2009, series={Verlagsschriftenreihe
des Heinz Nixdorf Instituts, Paderborn}, title={Ein System zur aggregierten Visualisierung
verteilter Materialflusssimulationen}, volume={252}, booktitle={Augmented &
Virtual Reality in der Produktentstehung}, publisher={Verlagsschriftenreihe des
Heinz Nixdorf Instituts, Paderborn}, author={Suess, Tim and Fischer, Matthias
and Huber, Daniel and Laroque, Christoph and Dangelmaier, Wilhelm}, year={2009},
pages={111--126}, collection={Verlagsschriftenreihe des Heinz Nixdorf Instituts,
Paderborn} }'
chicago: Suess, Tim, Matthias Fischer, Daniel Huber, Christoph Laroque, and Wilhelm
Dangelmaier. “Ein System Zur Aggregierten Visualisierung Verteilter Materialflusssimulationen.”
In Augmented & Virtual Reality in Der Produktentstehung, 252:111--126.
Verlagsschriftenreihe Des Heinz Nixdorf Instituts, Paderborn. Verlagsschriftenreihe
des Heinz Nixdorf Instituts, Paderborn, 2009.
ieee: T. Suess, M. Fischer, D. Huber, C. Laroque, and W. Dangelmaier, “Ein System
zur aggregierten Visualisierung verteilter Materialflusssimulationen,” in Augmented
& Virtual Reality in der Produktentstehung, vol. 252, Verlagsschriftenreihe
des Heinz Nixdorf Instituts, Paderborn, 2009, pp. 111--126.
mla: Suess, Tim, et al. “Ein System Zur Aggregierten Visualisierung Verteilter Materialflusssimulationen.”
Augmented & Virtual Reality in Der Produktentstehung, vol. 252, Verlagsschriftenreihe
des Heinz Nixdorf Instituts, Paderborn, 2009, pp. 111--126.
short: 'T. Suess, M. Fischer, D. Huber, C. Laroque, W. Dangelmaier, in: Augmented
& Virtual Reality in Der Produktentstehung, Verlagsschriftenreihe des Heinz
Nixdorf Instituts, Paderborn, 2009, pp. 111--126.'
date_created: 2020-08-25T14:25:41Z
date_updated: 2022-01-06T06:53:28Z
department:
- _id: '63'
- _id: '26'
intvolume: ' 252'
language:
- iso: eng
page: 111--126
publication: Augmented & Virtual Reality in der Produktentstehung
publisher: Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn
series_title: Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn
status: public
title: Ein System zur aggregierten Visualisierung verteilter Materialflusssimulationen
type: book_chapter
user_id: '5786'
volume: 252
year: '2009'
...
---
_id: '22941'
author:
- first_name: Roman
full_name: Dumitrescu, Roman
id: '16190'
last_name: Dumitrescu
- first_name: Jürgen
full_name: Gausemeier, Jürgen
id: '163'
last_name: Gausemeier
- first_name: Wilhelm
full_name: Dangelmaier, Wilhelm
last_name: Dangelmaier
- first_name: Benjamin
full_name: Klöpper, Benjamin
last_name: Klöpper
citation:
ama: 'Dumitrescu R, Gausemeier J, Dangelmaier W, Klöpper B. Solution Patterns for
the Development of Self-Optimizing Systems. In: Klöpper B, Dangelmaier W, eds.
Self-x in Engineering. MV Verlag; 2009.'
apa: Dumitrescu, R., Gausemeier, J., Dangelmaier, W., & Klöpper, B. (2009).
Solution Patterns for the Development of Self-Optimizing Systems. In B. Klöpper
& W. Dangelmaier (Eds.), Self-x in Engineering. MV Verlag.
bibtex: '@inbook{Dumitrescu_Gausemeier_Dangelmaier_Klöpper_2009, place={Münster},
title={Solution Patterns for the Development of Self-Optimizing Systems}, booktitle={Self-x
in Engineering}, publisher={MV Verlag}, author={Dumitrescu, Roman and Gausemeier,
Jürgen and Dangelmaier, Wilhelm and Klöpper, Benjamin}, editor={Klöpper, Benjamin
and Dangelmaier, Wilhelm}, year={2009} }'
chicago: 'Dumitrescu, Roman, Jürgen Gausemeier, Wilhelm Dangelmaier, and Benjamin
Klöpper. “Solution Patterns for the Development of Self-Optimizing Systems.” In
Self-x in Engineering, edited by Benjamin Klöpper and Wilhelm Dangelmaier.
Münster: MV Verlag, 2009.'
ieee: 'R. Dumitrescu, J. Gausemeier, W. Dangelmaier, and B. Klöpper, “Solution Patterns
for the Development of Self-Optimizing Systems,” in Self-x in Engineering,
B. Klöpper and W. Dangelmaier, Eds. Münster: MV Verlag, 2009.'
mla: Dumitrescu, Roman, et al. “Solution Patterns for the Development of Self-Optimizing
Systems.” Self-x in Engineering, edited by Benjamin Klöpper and Wilhelm
Dangelmaier, MV Verlag, 2009.
short: 'R. Dumitrescu, J. Gausemeier, W. Dangelmaier, B. Klöpper, in: B. Klöpper,
W. Dangelmaier (Eds.), Self-x in Engineering, MV Verlag, Münster, 2009.'
date_created: 2021-08-06T07:28:30Z
date_updated: 2022-01-06T06:55:43Z
department:
- _id: '563'
editor:
- first_name: Benjamin
full_name: Klöpper, Benjamin
last_name: Klöpper
- first_name: Wilhelm
full_name: Dangelmaier, Wilhelm
last_name: Dangelmaier
language:
- iso: eng
place: Münster
publication: Self-x in Engineering
publisher: MV Verlag
status: public
title: Solution Patterns for the Development of Self-Optimizing Systems
type: book_chapter
user_id: '15782'
year: '2009'
...
---
_id: '17416'
abstract:
- lang: eng
text: "In this paper we present a system for the simultaneous visualization of several
parallel executed simulation replications. By aggregating the scenes of multiple
similar simulations into one single scene it is possible to make a visual statistical
analysis of a set of discrete event simulations as well as to easily compare different
system parameterizations. The aim of our system is to enhance the model analysis,
verification and validation process in terms of speed and ease. The parallel execution
of several simulations of complex models and the visualization of these cannot
be done on one computer, thus a parallel approach is necessary. Our system uses
a thin-client and multiple processors on a PC-cluster. The rendering and the simulation
execution are done on processors of the cluster. The client is used only for the
visualization of the images transmitted by the cluster and for user interaction.\r\n"
author:
- first_name: Tim
full_name: Suess, Tim
last_name: Suess
- first_name: Daniel
full_name: Huber, Daniel
last_name: Huber
- first_name: Matthias
full_name: Fischer, Matthias
id: '146'
last_name: Fischer
- first_name: Christoph
full_name: Laroque, Christoph
last_name: Laroque
- first_name: Wilhelm
full_name: Dangelmaier, Wilhelm
last_name: Dangelmaier
citation:
ama: 'Suess T, Huber D, Fischer M, Laroque C, Dangelmaier W. A System for Aggregated
Visualization of Multiple Parallel Discrete Event Simulations. In: IEEE International
Symposium on Parallel and Distributed Processing with Applications. ; 2008.
doi:10.1109/ispa.2008.30'
apa: Suess, T., Huber, D., Fischer, M., Laroque, C., & Dangelmaier, W. (2008).
A System for Aggregated Visualization of Multiple Parallel Discrete Event Simulations.
IEEE International Symposium on Parallel and Distributed Processing with Applications.
https://doi.org/10.1109/ispa.2008.30
bibtex: '@inproceedings{Suess_Huber_Fischer_Laroque_Dangelmaier_2008, title={A System
for Aggregated Visualization of Multiple Parallel Discrete Event Simulations},
DOI={10.1109/ispa.2008.30},
booktitle={IEEE International Symposium on Parallel and Distributed Processing
with Applications}, author={Suess, Tim and Huber, Daniel and Fischer, Matthias
and Laroque, Christoph and Dangelmaier, Wilhelm}, year={2008} }'
chicago: Suess, Tim, Daniel Huber, Matthias Fischer, Christoph Laroque, and Wilhelm
Dangelmaier. “A System for Aggregated Visualization of Multiple Parallel Discrete
Event Simulations.” In IEEE International Symposium on Parallel and Distributed
Processing with Applications, 2008. https://doi.org/10.1109/ispa.2008.30.
ieee: 'T. Suess, D. Huber, M. Fischer, C. Laroque, and W. Dangelmaier, “A System
for Aggregated Visualization of Multiple Parallel Discrete Event Simulations,”
2008, doi: 10.1109/ispa.2008.30.'
mla: Suess, Tim, et al. “A System for Aggregated Visualization of Multiple Parallel
Discrete Event Simulations.” IEEE International Symposium on Parallel and Distributed
Processing with Applications, 2008, doi:10.1109/ispa.2008.30.
short: 'T. Suess, D. Huber, M. Fischer, C. Laroque, W. Dangelmaier, in: IEEE International
Symposium on Parallel and Distributed Processing with Applications, 2008.'
date_created: 2020-07-27T12:56:15Z
date_updated: 2022-01-06T06:53:11Z
department:
- _id: '63'
doi: 10.1109/ispa.2008.30
language:
- iso: eng
publication: IEEE International Symposium on Parallel and Distributed Processing with
Applications
publication_identifier:
isbn:
- '9780769534718'
publication_status: published
status: public
title: A System for Aggregated Visualization of Multiple Parallel Discrete Event Simulations
type: conference
user_id: '15415'
year: '2008'
...
---
_id: '17868'
abstract:
- lang: eng
text: 'The paper describes an approach for an aggregated animation of a simulation
experiment in an interactive 3D environment, visualizing multiple, distributed
simulation runs. Although the general approach of a 3-dimensional visualization
of material flow simulation helps to understand the dynamic behavior of a system
better as well as faster, it remains unclear, how typical the animated simulation
represents the model, if there is a stochastic influence for even some parameters.
By the integrated visualization of multiple distributed simulation runs, this
uncertainty can be solved, which will be shown in this paper for a typical simulation
study of a queuing system. '
author:
- first_name: Wilhelm
full_name: Dangelmaier, Wilhelm
last_name: Dangelmaier
- first_name: Matthias
full_name: Fischer, Matthias
id: '146'
last_name: Fischer
- first_name: Daniel
full_name: Huber, Daniel
last_name: Huber
- first_name: Christoph
full_name: Laroque, Christoph
last_name: Laroque
- first_name: Tim
full_name: Suess, Tim
last_name: Suess
citation:
ama: 'Dangelmaier W, Fischer M, Huber D, Laroque C, Suess T. Aggregated 3D-visualization
of a distributed simulation experiment of a queuing system. In: 2008 Winter
Simulation Conference. ; 2008:2012-2020. doi:10.1109/wsc.2008.4736296'
apa: Dangelmaier, W., Fischer, M., Huber, D., Laroque, C., & Suess, T. (2008).
Aggregated 3D-visualization of a distributed simulation experiment of a queuing
system. 2008 Winter Simulation Conference, 2012–2020. https://doi.org/10.1109/wsc.2008.4736296
bibtex: '@inproceedings{Dangelmaier_Fischer_Huber_Laroque_Suess_2008, place={Miami,
FL., USA}, title={Aggregated 3D-visualization of a distributed simulation experiment
of a queuing system}, DOI={10.1109/wsc.2008.4736296},
booktitle={2008 Winter Simulation Conference}, author={Dangelmaier, Wilhelm and
Fischer, Matthias and Huber, Daniel and Laroque, Christoph and Suess, Tim}, year={2008},
pages={2012–2020} }'
chicago: Dangelmaier, Wilhelm, Matthias Fischer, Daniel Huber, Christoph Laroque,
and Tim Suess. “Aggregated 3D-Visualization of a Distributed Simulation Experiment
of a Queuing System.” In 2008 Winter Simulation Conference, 2012–20. Miami,
FL., USA, 2008. https://doi.org/10.1109/wsc.2008.4736296.
ieee: 'W. Dangelmaier, M. Fischer, D. Huber, C. Laroque, and T. Suess, “Aggregated
3D-visualization of a distributed simulation experiment of a queuing system,”
in 2008 Winter Simulation Conference, 2008, pp. 2012–2020, doi: 10.1109/wsc.2008.4736296.'
mla: Dangelmaier, Wilhelm, et al. “Aggregated 3D-Visualization of a Distributed
Simulation Experiment of a Queuing System.” 2008 Winter Simulation Conference,
2008, pp. 2012–20, doi:10.1109/wsc.2008.4736296.
short: 'W. Dangelmaier, M. Fischer, D. Huber, C. Laroque, T. Suess, in: 2008 Winter
Simulation Conference, Miami, FL., USA, 2008, pp. 2012–2020.'
date_created: 2020-08-12T13:39:37Z
date_updated: 2022-01-06T06:53:22Z
department:
- _id: '63'
doi: 10.1109/wsc.2008.4736296
language:
- iso: eng
page: 2012-2020
place: Miami, FL., USA
publication: 2008 Winter Simulation Conference
publication_identifier:
isbn:
- '9781424427079'
publication_status: published
status: public
title: Aggregated 3D-visualization of a distributed simulation experiment of a queuing
system
type: conference
user_id: '15415'
year: '2008'
...
---
_id: '18139'
abstract:
- lang: eng
text: 'This paper describes a method for the animation of a large number of objects
within a dynamic 3D visualization of a material flow simulation model. It uses
key-frame based animation. The number of animated objects may grow constantly
in complex simulation models, which might lead to an amount of animations that
is too big to be computed in real-time. By the use of a dynamic adjustment, the
presented algorithm prefers important animations. Less relevant animations are
updated rarely, whereby the selection itself is taken by multiple indicators,
e.g. the visible size of the animated object on the screen, in order to keep a
good optical impression. Dependent on the computing power of the computer, the
algorithm controls the animations in such a way, that the fluid visualization
of a large number of objects is still possible. Though the algorithm is to be
used within a material flow simulator, it is moreover implemented in a specific
animation editor, which allows the design and control of animation schemes. It
supports the use of grouping to allow the creation of hierarchical structures
for complex animations in a fast and easy manner. The evaluation of the algorithm
is proven by a test scene, consisting of tens of thousands animated objects. '
author:
- first_name: Christoph
full_name: Laroque, Christoph
last_name: Laroque
- first_name: Matthias
full_name: Fischer, Matthias
id: '146'
last_name: Fischer
- first_name: Wilhelm
full_name: Dangelmaier, Wilhelm
last_name: Dangelmaier
- first_name: Benjamin
full_name: Eikel, Benjamin
last_name: Eikel
citation:
ama: 'Laroque C, Fischer M, Dangelmaier W, Eikel B. Dynamic Control of Animation
Schemes for the Efficient 3D-Visualization of Material Flow Simulations. In: Industrial
Simulation Conference (ISC 2008). EUROSIS-ETI; 2008:306-310.'
apa: Laroque, C., Fischer, M., Dangelmaier, W., & Eikel, B. (2008). Dynamic
Control of Animation Schemes for the Efficient 3D-Visualization of Material Flow
Simulations. In Industrial Simulation Conference (ISC 2008) (pp. 306–310).
EUROSIS-ETI.
bibtex: '@inproceedings{Laroque_Fischer_Dangelmaier_Eikel_2008, title={Dynamic Control
of Animation Schemes for the Efficient 3D-Visualization of Material Flow Simulations},
booktitle={Industrial Simulation Conference (ISC 2008)}, publisher={EUROSIS-ETI},
author={Laroque, Christoph and Fischer, Matthias and Dangelmaier, Wilhelm and
Eikel, Benjamin}, year={2008}, pages={306–310} }'
chicago: Laroque, Christoph, Matthias Fischer, Wilhelm Dangelmaier, and Benjamin
Eikel. “Dynamic Control of Animation Schemes for the Efficient 3D-Visualization
of Material Flow Simulations.” In Industrial Simulation Conference (ISC 2008),
306–10. EUROSIS-ETI, 2008.
ieee: C. Laroque, M. Fischer, W. Dangelmaier, and B. Eikel, “Dynamic Control of
Animation Schemes for the Efficient 3D-Visualization of Material Flow Simulations,”
in Industrial Simulation Conference (ISC 2008), 2008, pp. 306–310.
mla: Laroque, Christoph, et al. “Dynamic Control of Animation Schemes for the Efficient
3D-Visualization of Material Flow Simulations.” Industrial Simulation Conference
(ISC 2008), EUROSIS-ETI, 2008, pp. 306–10.
short: 'C. Laroque, M. Fischer, W. Dangelmaier, B. Eikel, in: Industrial Simulation
Conference (ISC 2008), EUROSIS-ETI, 2008, pp. 306–310.'
date_created: 2020-08-24T07:49:59Z
date_updated: 2022-01-06T06:53:26Z
department:
- _id: '63'
language:
- iso: eng
page: 306-310
publication: Industrial Simulation Conference (ISC 2008)
publisher: EUROSIS-ETI
status: public
title: Dynamic Control of Animation Schemes for the Efficient 3D-Visualization of
Material Flow Simulations
type: conference
user_id: '15415'
year: '2008'
...
---
_id: '18347'
abstract:
- lang: eng
text: "The validation of material flow models as well as the selection of promising
strategies for the generation of a successful experiment plan is a time-consuming
process. A new approach is presented, which supports the simulation expert in
his working process by giving him the opportunity to modify the simulated simulation
run and afterwards compare the effects of his modification with the original setting,
online and in one user interface, implemented by switching the visualizations
between the simulation runs or opening up to 5 parallel 3D windows. The method
developed therefore clones existing simulation runs online and allows the navigation
within these existing simulation runs. The method has been implemented and is
validated by a test model, which describes in detail the new working process of
a modeler. New research questions are derived from this work, which will define
following working steps.\r\n"
author:
- first_name: Matthias
full_name: Fischer, Matthias
id: '146'
last_name: Fischer
- first_name: 'Christoph '
full_name: 'Laroque, Christoph '
last_name: Laroque
- first_name: 'Daniel '
full_name: 'Huber, Daniel '
last_name: Huber
- first_name: 'Jens '
full_name: 'Krokowski, Jens '
last_name: Krokowski
- first_name: 'Bengt '
full_name: 'Mueck, Bengt '
last_name: Mueck
- first_name: 'Michael '
full_name: 'Kortenjan, Michael '
last_name: Kortenjan
- first_name: Mark
full_name: Aufenanger, Mark
last_name: Aufenanger
- first_name: Wilhelm
full_name: ' Dangelmaier, Wilhelm'
last_name: ' Dangelmaier'
citation:
ama: 'Fischer M, Laroque C, Huber D, et al. Interactive Refinement of a Material
Flow Simulation Model by Comparing Multiple Simulation Runs in one 3D Environment.
In: European Simulation and Modelling Conference (ESM 2007). ; 2007:499--505.'
apa: Fischer, M., Laroque, C., Huber, D., Krokowski, J., Mueck, B., Kortenjan, M.,
… Dangelmaier, W. (2007). Interactive Refinement of a Material Flow Simulation
Model by Comparing Multiple Simulation Runs in one 3D Environment. In European
Simulation and Modelling Conference (ESM 2007) (pp. 499--505).
bibtex: '@inproceedings{Fischer_Laroque_Huber_Krokowski_Mueck_Kortenjan_Aufenanger_
Dangelmaier_2007, title={Interactive Refinement of a Material Flow Simulation
Model by Comparing Multiple Simulation Runs in one 3D Environment}, booktitle={European
Simulation and Modelling Conference (ESM 2007)}, author={Fischer, Matthias and
Laroque, Christoph and Huber, Daniel and Krokowski, Jens and Mueck, Bengt and
Kortenjan, Michael and Aufenanger, Mark and Dangelmaier, Wilhelm}, year={2007},
pages={499--505} }'
chicago: Fischer, Matthias, Christoph Laroque, Daniel Huber, Jens Krokowski,
Bengt Mueck, Michael Kortenjan, Mark Aufenanger, and Wilhelm Dangelmaier. “Interactive
Refinement of a Material Flow Simulation Model by Comparing Multiple Simulation
Runs in One 3D Environment.” In European Simulation and Modelling Conference
(ESM 2007), 499--505, 2007.
ieee: M. Fischer et al., “Interactive Refinement of a Material Flow Simulation
Model by Comparing Multiple Simulation Runs in one 3D Environment,” in European
Simulation and Modelling Conference (ESM 2007), 2007, pp. 499--505.
mla: Fischer, Matthias, et al. “Interactive Refinement of a Material Flow Simulation
Model by Comparing Multiple Simulation Runs in One 3D Environment.” European
Simulation and Modelling Conference (ESM 2007), 2007, pp. 499--505.
short: 'M. Fischer, C. Laroque, D. Huber, J. Krokowski, B. Mueck, M. Kortenjan,
M. Aufenanger, W. Dangelmaier, in: European Simulation and Modelling Conference
(ESM 2007), 2007, pp. 499--505.'
date_created: 2020-08-26T09:23:24Z
date_updated: 2022-01-06T06:53:29Z
ddc:
- '004'
department:
- _id: '63'
file:
- access_level: closed
content_type: application/pdf
creator: koala
date_created: 2020-08-26T09:22:47Z
date_updated: 2020-08-26T09:22:47Z
file_id: '18348'
file_name: ESM07_final.pdf
file_size: 389588
relation: main_file
success: 1
file_date_updated: 2020-08-26T09:22:47Z
has_accepted_license: '1'
language:
- iso: eng
page: 499--505
publication: European Simulation and Modelling Conference (ESM 2007)
status: public
title: Interactive Refinement of a Material Flow Simulation Model by Comparing Multiple
Simulation Runs in one 3D Environment
type: conference
user_id: '15415'
year: '2007'
...
---
_id: '18349'
author:
- first_name: Wilhelm
full_name: Dangelmaier, Wilhelm
last_name: Dangelmaier
- first_name: 'Christoph '
full_name: ' Laroque, Christoph '
last_name: ' Laroque'
- first_name: Matthias
full_name: Fischer, Matthias
id: '146'
last_name: Fischer
citation:
ama: 'Dangelmaier W, Laroque C, Fischer M. Ein ganzheitlicher Ansatz zur immersiven
3D-Materialflusssimulation innerhalb der Digitalen Fabrik. In: Augmented &
Virtual Reality in Der Produktentstehung. Vol 209. Verlagsschriftenreihe des
Heinz Nixdorf Instituts, Paderborn. Verlagsschriftenreihe des Heinz Nixdorf Instituts,
Paderborn; 2007:95-110.'
apa: Dangelmaier, W., Laroque, C., & Fischer, M. (2007). Ein ganzheitlicher
Ansatz zur immersiven 3D-Materialflusssimulation innerhalb der Digitalen Fabrik.
Augmented & Virtual Reality in Der Produktentstehung, 209, 95–110.
bibtex: '@inproceedings{Dangelmaier_ Laroque_Fischer_2007, series={Verlagsschriftenreihe
des Heinz Nixdorf Instituts, Paderborn}, title={Ein ganzheitlicher Ansatz zur
immersiven 3D-Materialflusssimulation innerhalb der Digitalen Fabrik}, volume={209},
booktitle={Augmented & Virtual Reality in der Produktentstehung}, publisher={Verlagsschriftenreihe
des Heinz Nixdorf Instituts, Paderborn}, author={Dangelmaier, Wilhelm and Laroque,
Christoph and Fischer, Matthias}, year={2007}, pages={95–110}, collection={Verlagsschriftenreihe
des Heinz Nixdorf Instituts, Paderborn} }'
chicago: Dangelmaier, Wilhelm, Christoph Laroque, and Matthias Fischer. “Ein Ganzheitlicher
Ansatz Zur Immersiven 3D-Materialflusssimulation Innerhalb Der Digitalen Fabrik.”
In Augmented & Virtual Reality in Der Produktentstehung, 209:95–110.
Verlagsschriftenreihe Des Heinz Nixdorf Instituts, Paderborn. Verlagsschriftenreihe
des Heinz Nixdorf Instituts, Paderborn, 2007.
ieee: W. Dangelmaier, C. Laroque, and M. Fischer, “Ein ganzheitlicher Ansatz zur
immersiven 3D-Materialflusssimulation innerhalb der Digitalen Fabrik,” in Augmented
& Virtual Reality in der Produktentstehung, 2007, vol. 209, pp. 95–110.
mla: Dangelmaier, Wilhelm, et al. “Ein Ganzheitlicher Ansatz Zur Immersiven 3D-Materialflusssimulation
Innerhalb Der Digitalen Fabrik.” Augmented & Virtual Reality in Der Produktentstehung,
vol. 209, Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2007,
pp. 95–110.
short: 'W. Dangelmaier, C. Laroque, M. Fischer, in: Augmented & Virtual Reality
in Der Produktentstehung, Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn,
2007, pp. 95–110.'
date_created: 2020-08-26T09:30:58Z
date_updated: 2022-01-06T06:53:29Z
department:
- _id: '63'
- _id: '26'
intvolume: ' 209'
language:
- iso: eng
page: 95-110
publication: Augmented & Virtual Reality in der Produktentstehung
publisher: Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn
series_title: Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn
status: public
title: Ein ganzheitlicher Ansatz zur immersiven 3D-Materialflusssimulation innerhalb
der Digitalen Fabrik
type: conference
user_id: '5786'
volume: 209
year: '2007'
...
---
_id: '22331'
author:
- first_name: Jürgen
full_name: Gausemeier, Jürgen
last_name: Gausemeier
- first_name: Wilhelm
full_name: Dangelmaier, Wilhelm
last_name: Dangelmaier
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
- first_name: Alexander
full_name: Schmidt, Alexander
last_name: Schmidt
- first_name: Ursula
full_name: Frank, Ursula
last_name: Frank
- first_name: Benjamin
full_name: Klöpper, Benjamin
last_name: Klöpper
citation:
ama: 'Gausemeier J, Dangelmaier W, Zimmer D, Schmidt A, Frank U, Klöpper B. Using
Active Patterns for the Conceptual Design of Self-Optimizing Systems Exemplified
by an Air Gap Adjustment System. In: Computers and Information in Engineering
Conference, Parts A and B. Vol 27. American Society of Mechanical Engineers;
2007:935-944. doi:10.1115/DETC2007-34642'
apa: Gausemeier, J., Dangelmaier, W., Zimmer, D., Schmidt, A., Frank, U., &
Klöpper, B. (2007). Using Active Patterns for the Conceptual Design of Self-Optimizing
Systems Exemplified by an Air Gap Adjustment System. In Computers and Information
in Engineering Conference, Parts A and B (Vol. 27, pp. 935–944). American
Society of Mechanical Engineers. https://doi.org/10.1115/DETC2007-34642
bibtex: '@inproceedings{Gausemeier_Dangelmaier_Zimmer_Schmidt_Frank_Klöpper_2007,
title={Using Active Patterns for the Conceptual Design of Self-Optimizing Systems
Exemplified by an Air Gap Adjustment System}, volume={27}, DOI={10.1115/DETC2007-34642},
booktitle={Computers and Information in Engineering Conference, Parts A and B},
publisher={American Society of Mechanical Engineers}, author={Gausemeier, Jürgen
and Dangelmaier, Wilhelm and Zimmer, Detmar and Schmidt, Alexander and Frank,
Ursula and Klöpper, Benjamin}, year={2007}, pages={935–944} }'
chicago: Gausemeier, Jürgen, Wilhelm Dangelmaier, Detmar Zimmer, Alexander Schmidt,
Ursula Frank, and Benjamin Klöpper. “Using Active Patterns for the Conceptual
Design of Self-Optimizing Systems Exemplified by an Air Gap Adjustment System.”
In Computers and Information in Engineering Conference, Parts A and B,
27:935–44. American Society of Mechanical Engineers, 2007. https://doi.org/10.1115/DETC2007-34642.
ieee: J. Gausemeier, W. Dangelmaier, D. Zimmer, A. Schmidt, U. Frank, and B. Klöpper,
“Using Active Patterns for the Conceptual Design of Self-Optimizing Systems Exemplified
by an Air Gap Adjustment System,” in Computers and Information in Engineering
Conference, Parts A and B, 2007, vol. 27, pp. 935–944.
mla: Gausemeier, Jürgen, et al. “Using Active Patterns for the Conceptual Design
of Self-Optimizing Systems Exemplified by an Air Gap Adjustment System.” Computers
and Information in Engineering Conference, Parts A and B, vol. 27, American
Society of Mechanical Engineers, 2007, pp. 935–44, doi:10.1115/DETC2007-34642.
short: 'J. Gausemeier, W. Dangelmaier, D. Zimmer, A. Schmidt, U. Frank, B. Klöpper,
in: Computers and Information in Engineering Conference, Parts A and B, American
Society of Mechanical Engineers, 2007, pp. 935–944.'
date_created: 2021-06-15T11:08:06Z
date_updated: 2022-01-06T06:55:31Z
department:
- _id: '9'
- _id: '146'
doi: 10.1115/DETC2007-34642
intvolume: ' 27'
language:
- iso: eng
page: 935-944
publication: Computers and Information in Engineering Conference, Parts A and B
publication_identifier:
isbn:
- 0-7918-3806-4
publisher: American Society of Mechanical Engineers
status: public
title: Using Active Patterns for the Conceptual Design of Self-Optimizing Systems
Exemplified by an Air Gap Adjustment System
type: conference
user_id: '38077'
volume: 27
year: '2007'
...
---
_id: '17417'
abstract:
- lang: eng
text: We present a parallel algorithm for the rendering of complex three-dimensional
scenes. The algorithm runs across heterogeneous architectures of PC-clusters consisting
of a visualization-node, equipped with a powerful graphics adapter, and cluster
nodes requiring weaker graphics capabilities only. The visualization-node renders
a mixture of scene objects and simplified meshes (Reliefboards). The cluster nodes
assist the visualization-node by asynchronous computing of Reliefboards, which
are used to replace and render distant parts of the scene. Our algorithm is capable
of gaining significant speedups if the cluster's nodes provide weak graphics adapters
only. We trade the number of cluster nodes off the scene objects' image quality.
citation:
ama: 'Rammig F-J, Dangelmaier W, Karl H, Mertsching B, Meyer auf der Heide F, Trächtler
A, eds. Self-Coordinating Systems: The Next Challenge in Research on Distributed
Systems. Verlagsschriftenreihe des Heinz Nixdorf Instituts; 2006.'
apa: 'Rammig, F.-J., Dangelmaier, W., Karl, H., Mertsching, B., Meyer auf der Heide,
F., & Trächtler, A. (Eds.). (2006). Self-Coordinating Systems: The Next
Challenge in Research on Distributed Systems. Verlagsschriftenreihe des Heinz
Nixdorf Instituts.'
bibtex: '@book{Rammig_Dangelmaier_Karl_Mertsching_Meyer auf der Heide_Trächtler_2006,
place={Paderborn}, series={Proceedings of the 6th International Heinz Nixdorf
Symposium}, title={Self-Coordinating Systems: The Next Challenge in Research on
Distributed Systems}, publisher={Verlagsschriftenreihe des Heinz Nixdorf Instituts},
year={2006}, collection={Proceedings of the 6th International Heinz Nixdorf Symposium}
}'
chicago: 'Rammig, Franz-Josef, Wilhelm Dangelmaier, Holger Karl, Bärbel Mertsching,
Friedhelm Meyer auf der Heide, and Ansgar Trächtler, eds. Self-Coordinating
Systems: The Next Challenge in Research on Distributed Systems. Proceedings
of the 6th International Heinz Nixdorf Symposium. Paderborn: Verlagsschriftenreihe
des Heinz Nixdorf Instituts, 2006.'
ieee: 'F.-J. Rammig, W. Dangelmaier, H. Karl, B. Mertsching, F. Meyer auf der Heide,
and A. Trächtler, Eds., Self-Coordinating Systems: The Next Challenge in Research
on Distributed Systems. Paderborn: Verlagsschriftenreihe des Heinz Nixdorf
Instituts, 2006.'
mla: 'Rammig, Franz-Josef, et al., editors. Self-Coordinating Systems: The Next
Challenge in Research on Distributed Systems. Verlagsschriftenreihe des Heinz
Nixdorf Instituts, 2006.'
short: 'F.-J. Rammig, W. Dangelmaier, H. Karl, B. Mertsching, F. Meyer auf der Heide,
A. Trächtler, eds., Self-Coordinating Systems: The Next Challenge in Research
on Distributed Systems, Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn,
2006.'
date_created: 2020-07-27T13:00:52Z
date_updated: 2022-01-06T06:53:11Z
department:
- _id: '63'
- _id: '26'
editor:
- first_name: Franz-Josef
full_name: Rammig, Franz-Josef
last_name: Rammig
- first_name: Wilhelm
full_name: Dangelmaier, Wilhelm
last_name: Dangelmaier
- first_name: Holger
full_name: Karl, Holger
id: '126'
last_name: Karl
- first_name: Bärbel
full_name: Mertsching, Bärbel
last_name: Mertsching
- first_name: Friedhelm
full_name: Meyer auf der Heide, Friedhelm
id: '15523'
last_name: Meyer auf der Heide
- first_name: Ansgar
full_name: Trächtler, Ansgar
last_name: Trächtler
language:
- iso: eng
place: Paderborn
publisher: Verlagsschriftenreihe des Heinz Nixdorf Instituts
series_title: Proceedings of the 6th International Heinz Nixdorf Symposium
status: public
title: 'Self-Coordinating Systems: The Next Challenge in Research on Distributed Systems'
type: conference_editor
user_id: '15415'
year: '2006'
...
---
_id: '18351'
abstract:
- lang: eng
text: In this paper the ideas of a new research project are presented. The material
flow simu- lator d3FACT insight shall manage multiple parallel and time synchronous
simulations to grand the power of real-time visualization in combination with
statistical analysis. This research is issued to overcome the conflict of simulation
run repetition for a good statistical basis and real-time immersive visualization.
A side effect will be the reduc- tion of time needed for simulation experiments.
The planned simulation tool has the feature of triggered cloning, i.e., the user
can decide during runtime to clone a set of simulations after changing parameters
to preserve the original system. The simulations will be aggregated by visualization
and statistics. The rendering is planned to overlay several simulations using
effects like inking and transparency. Simulation data will be aggregated with
statistical functions and diagrams.
author:
- first_name: 'Wilhelm '
full_name: 'Dangelmaier, Wilhelm '
last_name: Dangelmaier
- first_name: 'Daniel '
full_name: 'Huber, Daniel '
last_name: Huber
- first_name: 'Christoph '
full_name: 'Laroque, Christoph '
last_name: Laroque
- first_name: Mark
full_name: Aufenanger, Mark
last_name: Aufenanger
- first_name: Matthias
full_name: Fischer, Matthias
id: '146'
last_name: Fischer
- first_name: Jens
full_name: Krokowski, Jens
last_name: Krokowski
- first_name: Michael
full_name: Kortenjan, Michael
last_name: Kortenjan
citation:
ama: 'Dangelmaier W, Huber D, Laroque C, et al. d3FACT insight goes parallel
- Aggregation of multiple simulations. In: Simulation and Visualization 2006
(SimViS). SCS European Publishing House; 2006:79-88.'
apa: Dangelmaier, W., Huber, D., Laroque, C., Aufenanger, M., Fischer, M., Krokowski,
J., & Kortenjan, M. (2006). d3FACT insight goes parallel - Aggregation
of multiple simulations. In Simulation and Visualization 2006 (SimViS)
(pp. 79–88). SCS European Publishing House.
bibtex: '@inproceedings{Dangelmaier_Huber_Laroque_Aufenanger_Fischer_Krokowski_Kortenjan_2006,
title={d3FACT insight goes parallel - Aggregation of multiple simulations},
booktitle={Simulation and Visualization 2006 (SimViS)}, publisher={SCS European
Publishing House}, author={Dangelmaier, Wilhelm and Huber, Daniel and Laroque,
Christoph and Aufenanger, Mark and Fischer, Matthias and Krokowski, Jens and
Kortenjan, Michael}, year={2006}, pages={79–88} }'
chicago: Dangelmaier, Wilhelm , Daniel Huber, Christoph Laroque, Mark Aufenanger,
Matthias Fischer, Jens Krokowski, and Michael Kortenjan. “D3FACT Insight
Goes Parallel - Aggregation of Multiple Simulations.” In Simulation and Visualization
2006 (SimViS), 79–88. SCS European Publishing House, 2006.
ieee: W. Dangelmaier et al., “d3FACT insight goes parallel - Aggregation
of multiple simulations,” in Simulation and Visualization 2006 (SimViS),
2006, pp. 79–88.
mla: Dangelmaier, Wilhelm, et al. “D3FACT Insight Goes Parallel - Aggregation
of Multiple Simulations.” Simulation and Visualization 2006 (SimViS), SCS
European Publishing House, 2006, pp. 79–88.
short: 'W. Dangelmaier, D. Huber, C. Laroque, M. Aufenanger, M. Fischer, J. Krokowski,
M. Kortenjan, in: Simulation and Visualization 2006 (SimViS), SCS European Publishing
House, 2006, pp. 79–88.'
date_created: 2020-08-26T09:48:35Z
date_updated: 2022-01-06T06:53:29Z
department:
- _id: '63'
language:
- iso: eng
page: 79-88
publication: Simulation and Visualization 2006 (SimViS)
publisher: SCS European Publishing House
status: public
title: d³FACT insight goes parallel - Aggregation of multiple simulations
type: conference
user_id: '15415'
year: '2006'
...
---
_id: '23299'
author:
- first_name: Franz-Josef
full_name: Rammig, Franz-Josef
last_name: Rammig
- first_name: Wilhelm
full_name: Dangelmaier, Wilhelm
last_name: Dangelmaier
- first_name: Holger
full_name: Karl, Holger
last_name: Karl
- first_name: Bärbel
full_name: Mertsching, Bärbel
last_name: Mertsching
- first_name: Friedhelm
full_name: Meyer auf der Heide, Friedhelm
id: '15523'
last_name: Meyer auf der Heide
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: 'Rammig F-J, Dangelmaier W, Karl H, Mertsching B, Meyer auf der Heide F, Trächtler
A. Self-Coordinating Systems: The Next Challenge in Research on Distributed Systems.
In: New Trends in Parallel & Distributed Computing. Vol 181. Verlagsschriftenreihe
des Heinz Nixdorf Instituts, Paderborn. Heinz Nixdorf Institut; 2006:248-259.'
apa: 'Rammig, F.-J., Dangelmaier, W., Karl, H., Mertsching, B., Meyer auf der Heide,
F., & Trächtler, A. (2006). Self-Coordinating Systems: The Next Challenge
in Research on Distributed Systems. In New Trends in Parallel & Distributed
Computing (Vol. 181, pp. 248–259). Heinz Nixdorf Institut.'
bibtex: '@inproceedings{Rammig_Dangelmaier_Karl_Mertsching_Meyer auf der Heide_Trächtler_2006,
series={Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn}, title={Self-Coordinating
Systems: The Next Challenge in Research on Distributed Systems}, volume={181},
booktitle={New Trends in Parallel & Distributed Computing}, publisher={Heinz
Nixdorf Institut}, author={Rammig, Franz-Josef and Dangelmaier, Wilhelm and Karl,
Holger and Mertsching, Bärbel and Meyer auf der Heide, Friedhelm and Trächtler,
Ansgar}, year={2006}, pages={248–259}, collection={Verlagsschriftenreihe des Heinz
Nixdorf Instituts, Paderborn} }'
chicago: 'Rammig, Franz-Josef, Wilhelm Dangelmaier, Holger Karl, Bärbel Mertsching,
Friedhelm Meyer auf der Heide, and Ansgar Trächtler. “Self-Coordinating Systems:
The Next Challenge in Research on Distributed Systems.” In New Trends in Parallel
& Distributed Computing, 181:248–59. Verlagsschriftenreihe Des Heinz Nixdorf
Instituts, Paderborn. Heinz Nixdorf Institut, 2006.'
ieee: 'F.-J. Rammig, W. Dangelmaier, H. Karl, B. Mertsching, F. Meyer auf der Heide,
and A. Trächtler, “Self-Coordinating Systems: The Next Challenge in Research on
Distributed Systems,” in New Trends in Parallel & Distributed Computing,
2006, vol. 181, pp. 248–259.'
mla: 'Rammig, Franz-Josef, et al. “Self-Coordinating Systems: The Next Challenge
in Research on Distributed Systems.” New Trends in Parallel & Distributed
Computing, vol. 181, Heinz Nixdorf Institut, 2006, pp. 248–59.'
short: 'F.-J. Rammig, W. Dangelmaier, H. Karl, B. Mertsching, F. Meyer auf der Heide,
A. Trächtler, in: New Trends in Parallel & Distributed Computing, Heinz Nixdorf
Institut, 2006, pp. 248–259.'
date_created: 2021-08-09T09:18:25Z
date_updated: 2022-01-06T06:55:48Z
department:
- _id: '153'
intvolume: ' 181'
language:
- iso: eng
page: 248 - 259
publication: New Trends in Parallel & Distributed Computing
publisher: Heinz Nixdorf Institut
series_title: Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn
status: public
title: 'Self-Coordinating Systems: The Next Challenge in Research on Distributed Systems'
type: conference
user_id: '24876'
volume: 181
year: '2006'
...
---
_id: '17414'
abstract:
- lang: eng
text: "Nowadays companies operate in a difficult environment: the dynamics of innovations
increase and product life cycles become shorter. Furthermore products and the
corresponding manufacturing processes get more and more complex. Therefore, companies
need new methods for the planning of manufacturing systems. One promising approach
in this context is digital factory/virtual production\x97the modeling and analysis
of computer models of the planned factory with the objective to reduce time and
costs. For the modeling and analysis various simulation methods and programs have
been developed. They are a highly valuable support for planning and visualizing
the manufacturing system. But there is one major disadvantage: only experienced
and long trained experts are able to operate with these programs. The graphical
user interface is very complex and not intuitive to use. This results in an extensive
and error-prone modeling of complex simulation models and a time-consuming interpretation
of the simulation results.\r\n\r\nTo overcome these weak points, intuitive and
understandable man\x96machine interfaces like augmented and virtual reality can
be used. This paper describes the architecture of a system which uses the technologies
of augmented and virtual reality to support the planning process of complex manufacturing
systems. The proposed system assists the user in modeling, the validation of the
simulation model, and the subsequent optimization of the production system. A
general application of the VR- and AR-technologies and of the simulation is realized
by the development of appropriate linking and integration mechanisms. For the
visualization of the arising 3D-data within the VR- and AR-environments, a dedicated
3D-rendering library is used."
author:
- first_name: Wilhelm
full_name: Dangelmaier, Wilhelm
last_name: Dangelmaier
- first_name: Matthias
full_name: Fischer, Matthias
id: '146'
last_name: Fischer
- first_name: Jürgen
full_name: Gausemeier, Jürgen
last_name: Gausemeier
- first_name: Michael
full_name: Grafe, Michael
last_name: Grafe
- first_name: Carsten
full_name: Matysczok, Carsten
last_name: Matysczok
- first_name: Bengt
full_name: Mueck, Bengt
last_name: Mueck
citation:
ama: Dangelmaier W, Fischer M, Gausemeier J, Grafe M, Matysczok C, Mueck B. Virtual
and augmented reality support for discrete manufacturing system simulation. Computers
in Industry. 2005:371-383. doi:10.1016/j.compind.2005.01.007
apa: Dangelmaier, W., Fischer, M., Gausemeier, J., Grafe, M., Matysczok, C., &
Mueck, B. (2005). Virtual and augmented reality support for discrete manufacturing
system simulation. Computers in Industry, 371–383. https://doi.org/10.1016/j.compind.2005.01.007
bibtex: '@article{Dangelmaier_Fischer_Gausemeier_Grafe_Matysczok_Mueck_2005, title={Virtual
and augmented reality support for discrete manufacturing system simulation}, DOI={10.1016/j.compind.2005.01.007},
journal={Computers in Industry}, author={Dangelmaier, Wilhelm and Fischer, Matthias
and Gausemeier, Jürgen and Grafe, Michael and Matysczok, Carsten and Mueck, Bengt},
year={2005}, pages={371–383} }'
chicago: Dangelmaier, Wilhelm, Matthias Fischer, Jürgen Gausemeier, Michael Grafe,
Carsten Matysczok, and Bengt Mueck. “Virtual and Augmented Reality Support for
Discrete Manufacturing System Simulation.” Computers in Industry, 2005,
371–83. https://doi.org/10.1016/j.compind.2005.01.007.
ieee: W. Dangelmaier, M. Fischer, J. Gausemeier, M. Grafe, C. Matysczok, and B.
Mueck, “Virtual and augmented reality support for discrete manufacturing system
simulation,” Computers in Industry, pp. 371–383, 2005.
mla: Dangelmaier, Wilhelm, et al. “Virtual and Augmented Reality Support for Discrete
Manufacturing System Simulation.” Computers in Industry, 2005, pp. 371–83,
doi:10.1016/j.compind.2005.01.007.
short: W. Dangelmaier, M. Fischer, J. Gausemeier, M. Grafe, C. Matysczok, B. Mueck,
Computers in Industry (2005) 371–383.
date_created: 2020-07-27T12:11:32Z
date_updated: 2022-01-06T06:53:11Z
department:
- _id: '63'
doi: 10.1016/j.compind.2005.01.007
language:
- iso: eng
page: 371-383
publication: Computers in Industry
publication_identifier:
issn:
- 0166-3615
publication_status: published
status: public
title: Virtual and augmented reality support for discrete manufacturing system simulation
type: journal_article
user_id: '15415'
year: '2005'
...
---
_id: '18366'
author:
- first_name: Wilhelm
full_name: Dangelmaier, Wilhelm
last_name: Dangelmaier
- first_name: Bengt
full_name: Mueck, Bengt
last_name: Mueck
- first_name: Matthias
full_name: Fischer, Matthias
id: '146'
last_name: Fischer
- first_name: Kiran
full_name: Mahajan, Kiran
last_name: Mahajan
- first_name: Christoph
full_name: ' Laroque, Christoph'
last_name: ' Laroque'
citation:
ama: 'Dangelmaier W, Mueck B, Fischer M, Mahajan K, Laroque C. Methods to lead
the user to significant processes in a 3D material flow simulation. In: Simulation
in Wider Europe - 19th European Conference on Modelling and Simulation ECMS 2005.
; 2005:267-270.'
apa: Dangelmaier, W., Mueck, B., Fischer, M., Mahajan, K., & Laroque, C. (2005).
Methods to lead the user to significant processes in a 3D material flow simulation.
In Simulation in wider Europe - 19th European Conference on Modelling and Simulation
ECMS 2005 (pp. 267–270).
bibtex: '@inproceedings{Dangelmaier_Mueck_Fischer_Mahajan_ Laroque_2005, title={Methods
to lead the user to significant processes in a 3D material flow simulation}, booktitle={Simulation
in wider Europe - 19th European Conference on Modelling and Simulation ECMS 2005},
author={Dangelmaier, Wilhelm and Mueck, Bengt and Fischer, Matthias and Mahajan,
Kiran and Laroque, Christoph}, year={2005}, pages={267–270} }'
chicago: Dangelmaier, Wilhelm, Bengt Mueck, Matthias Fischer, Kiran Mahajan, and
Christoph Laroque. “Methods to Lead the User to Significant Processes in a 3D
Material Flow Simulation.” In Simulation in Wider Europe - 19th European Conference
on Modelling and Simulation ECMS 2005, 267–70, 2005.
ieee: W. Dangelmaier, B. Mueck, M. Fischer, K. Mahajan, and C. Laroque, “Methods
to lead the user to significant processes in a 3D material flow simulation,” in
Simulation in wider Europe - 19th European Conference on Modelling and Simulation
ECMS 2005, 2005, pp. 267–270.
mla: Dangelmaier, Wilhelm, et al. “Methods to Lead the User to Significant Processes
in a 3D Material Flow Simulation.” Simulation in Wider Europe - 19th European
Conference on Modelling and Simulation ECMS 2005, 2005, pp. 267–70.
short: 'W. Dangelmaier, B. Mueck, M. Fischer, K. Mahajan, C. Laroque, in: Simulation
in Wider Europe - 19th European Conference on Modelling and Simulation ECMS 2005,
2005, pp. 267–270.'
date_created: 2020-08-26T12:36:33Z
date_updated: 2022-01-06T06:53:30Z
department:
- _id: '63'
language:
- iso: eng
page: 267-270
publication: Simulation in wider Europe - 19th European Conference on Modelling and
Simulation ECMS 2005
status: public
title: Methods to lead the user to significant processes in a 3D material flow simulation
type: conference
user_id: '15415'
year: '2005'
...
---
_id: '7940'
author:
- first_name: Kiran
full_name: Mahajan, Kiran
last_name: Mahajan
- first_name: Christoph
full_name: Laroque, Christoph
last_name: Laroque
- first_name: Wilhelm
full_name: Dangelmaier, Wilhelm
last_name: Dangelmaier
- first_name: Christian
full_name: Soltenborn, Christian
id: '1737'
last_name: Soltenborn
orcid: 0000-0002-0342-8227
- first_name: Michael
full_name: Kortenjan, Michael
last_name: Kortenjan
- first_name: Daniel
full_name: Kuntze, Daniel
last_name: Kuntze
citation:
ama: 'Mahajan K, Laroque C, Dangelmaier W, Soltenborn C, Kortenjan M, Kuntze D.
d3FACT insight: A motion planning algorithm for material flow simulations
in virtual environments. In: Proceedings of the Conference on Simulation and
Visualization (SimViS 2005), Magedeburg (Germany). Vol 1. Erlangen: SCS European
Publishing House; 2005:115-126.'
apa: 'Mahajan, K., Laroque, C., Dangelmaier, W., Soltenborn, C., Kortenjan, M.,
& Kuntze, D. (2005). d3FACT insight: A motion planning algorithm
for material flow simulations in virtual environments. In Proceedings of the
conference on Simulation and Visualization (SimViS 2005), Magedeburg (Germany)
(Vol. 1, pp. 115–126). Erlangen: SCS European Publishing House.'
bibtex: '@inproceedings{Mahajan_Laroque_Dangelmaier_Soltenborn_Kortenjan_Kuntze_2005,
place={Erlangen}, title={d3FACT insight: A motion planning algorithm
for material flow simulations in virtual environments}, volume={1}, booktitle={Proceedings
of the conference on Simulation and Visualization (SimViS 2005), Magedeburg (Germany)},
publisher={SCS European Publishing House}, author={Mahajan, Kiran and Laroque,
Christoph and Dangelmaier, Wilhelm and Soltenborn, Christian and Kortenjan, Michael
and Kuntze, Daniel}, year={2005}, pages={115–126} }'
chicago: 'Mahajan, Kiran, Christoph Laroque, Wilhelm Dangelmaier, Christian Soltenborn,
Michael Kortenjan, and Daniel Kuntze. “D3FACT Insight: A Motion Planning
Algorithm for Material Flow Simulations in Virtual Environments.” In Proceedings
of the Conference on Simulation and Visualization (SimViS 2005), Magedeburg (Germany),
1:115–26. Erlangen: SCS European Publishing House, 2005.'
ieee: 'K. Mahajan, C. Laroque, W. Dangelmaier, C. Soltenborn, M. Kortenjan, and
D. Kuntze, “d3FACT insight: A motion planning algorithm for material
flow simulations in virtual environments,” in Proceedings of the conference
on Simulation and Visualization (SimViS 2005), Magedeburg (Germany), 2005,
vol. 1, pp. 115–126.'
mla: 'Mahajan, Kiran, et al. “D3FACT Insight: A Motion Planning Algorithm
for Material Flow Simulations in Virtual Environments.” Proceedings of the
Conference on Simulation and Visualization (SimViS 2005), Magedeburg (Germany),
vol. 1, SCS European Publishing House, 2005, pp. 115–26.'
short: 'K. Mahajan, C. Laroque, W. Dangelmaier, C. Soltenborn, M. Kortenjan, D.
Kuntze, in: Proceedings of the Conference on Simulation and Visualization (SimViS
2005), Magedeburg (Germany), SCS European Publishing House, Erlangen, 2005, pp.
115–126.'
date_created: 2019-02-21T11:36:08Z
date_updated: 2022-01-06T07:03:48Z
department:
- _id: '66'
intvolume: ' 1'
language:
- iso: eng
page: 115-126
place: Erlangen
publication: Proceedings of the conference on Simulation and Visualization (SimViS
2005), Magedeburg (Germany)
publisher: SCS European Publishing House
status: public
title: 'd³FACT insight: A motion planning algorithm for material flow simulations
in virtual environments'
type: conference
user_id: '14955'
volume: 1
year: '2005'
...
---
_id: '18364'
abstract:
- lang: eng
text: "The visualisation of manufacturing-processes assists the user in understanding
and analysis.\r\nTypically he can move free and unguided in a virtual environment
which visualizes the entire\r\nprocess. Thus knowledge and conclusions are to
some extend acquired on a random base.\r\nThis article describes the development
of a tool, which enables the user to interactively improve\r\nsignificant production
processes in the simulation. He moves in a virtual 3D-environment\r\n(walkthrough
system) and is able to acquire automatically calculated indications for significant\r\nprocesses.
At the same time the simulation considers significant objects in a more detailed
way. If\r\nthe viewer is interested in a significant process, he is automatically
guided to the relevant location\r\nwhere he can examine the critical situation
by modification of the simulation model."
author:
- first_name: Bengt
full_name: Mueck, Bengt
last_name: Mueck
- first_name: Wilhelm
full_name: Dangelmaier, Wilhelm
last_name: Dangelmaier
- first_name: 'Christoph '
full_name: 'Laroque, Christoph '
last_name: Laroque
- first_name: Matthias
full_name: Fischer, Matthias
id: '146'
last_name: Fischer
- first_name: Michael
full_name: Kortenjan, Michael
last_name: Kortenjan
citation:
ama: 'Mueck B, Dangelmaier W, Laroque C, Fischer M, Kortenjan M. Guidance of Users
in Interactive 3D-Visualisations of Material Flow Simulations. In: Simulation
and Visualisation 2004. Magdeburg: SCS European Publishing House; 2004:73-83.'
apa: 'Mueck, B., Dangelmaier, W., Laroque, C., Fischer, M., & Kortenjan, M.
(2004). Guidance of Users in Interactive 3D-Visualisations of Material Flow Simulations.
In Simulation and Visualisation 2004 (pp. 73–83). Magdeburg: SCS European
Publishing House.'
bibtex: '@inproceedings{Mueck_Dangelmaier_Laroque_Fischer_Kortenjan_2004, place={Magdeburg},
title={Guidance of Users in Interactive 3D-Visualisations of Material Flow Simulations},
booktitle={Simulation and Visualisation 2004}, publisher={SCS European Publishing
House}, author={Mueck, Bengt and Dangelmaier, Wilhelm and Laroque, Christoph and
Fischer, Matthias and Kortenjan, Michael}, year={2004}, pages={73–83} }'
chicago: 'Mueck, Bengt, Wilhelm Dangelmaier, Christoph Laroque, Matthias Fischer,
and Michael Kortenjan. “Guidance of Users in Interactive 3D-Visualisations of
Material Flow Simulations.” In Simulation and Visualisation 2004, 73–83.
Magdeburg: SCS European Publishing House, 2004.'
ieee: B. Mueck, W. Dangelmaier, C. Laroque, M. Fischer, and M. Kortenjan, “Guidance
of Users in Interactive 3D-Visualisations of Material Flow Simulations,” in Simulation
and Visualisation 2004, 2004, pp. 73–83.
mla: Mueck, Bengt, et al. “Guidance of Users in Interactive 3D-Visualisations of
Material Flow Simulations.” Simulation and Visualisation 2004, SCS European
Publishing House, 2004, pp. 73–83.
short: 'B. Mueck, W. Dangelmaier, C. Laroque, M. Fischer, M. Kortenjan, in: Simulation
and Visualisation 2004, SCS European Publishing House, Magdeburg, 2004, pp. 73–83.'
date_created: 2020-08-26T12:29:21Z
date_updated: 2022-01-06T06:53:30Z
ddc:
- '000'
department:
- _id: '63'
file:
- access_level: closed
content_type: application/pdf
creator: koala
date_created: 2020-08-26T12:29:05Z
date_updated: 2020-08-26T12:29:05Z
file_id: '18365'
file_name: hni-id-1642.pdf
file_size: 1767621
relation: main_file
success: 1
file_date_updated: 2020-08-26T12:29:05Z
has_accepted_license: '1'
language:
- iso: eng
page: 73-83
place: Magdeburg
publication: Simulation and Visualisation 2004
publisher: SCS European Publishing House
status: public
title: Guidance of Users in Interactive 3D-Visualisations of Material Flow Simulations
type: conference
user_id: '15415'
year: '2004'
...
---
_id: '17423'
author:
- first_name: Bengt
full_name: Mueck, Bengt
last_name: Mueck
- first_name: Wilhelm
full_name: Dangelmaier, Wilhelm
last_name: Dangelmaier
- first_name: Matthias
full_name: Fischer, Matthias
id: '146'
last_name: Fischer
citation:
ama: 'Mueck B, Dangelmaier W, Fischer M. Components for the Active Support of the
Analysis of Material Flow Simulations in a Virtual Environment. In: 15th European
Simulation Symposium (ESS 2003). SCS - Europe; 2003:367-371.'
apa: Mueck, B., Dangelmaier, W., & Fischer, M. (2003). Components for the Active
Support of the Analysis of Material Flow Simulations in a Virtual Environment.
In 15th European Simulation Symposium (ESS 2003) (pp. 367–371). SCS - Europe.
bibtex: '@inproceedings{Mueck_Dangelmaier_Fischer_2003, title={Components for the
Active Support of the Analysis of Material Flow Simulations in a Virtual Environment},
booktitle={15th European Simulation Symposium (ESS 2003)}, publisher={SCS - Europe},
author={Mueck, Bengt and Dangelmaier, Wilhelm and Fischer, Matthias}, year={2003},
pages={367–371} }'
chicago: Mueck, Bengt, Wilhelm Dangelmaier, and Matthias Fischer. “Components for
the Active Support of the Analysis of Material Flow Simulations in a Virtual Environment.”
In 15th European Simulation Symposium (ESS 2003), 367–71. SCS - Europe,
2003.
ieee: B. Mueck, W. Dangelmaier, and M. Fischer, “Components for the Active Support
of the Analysis of Material Flow Simulations in a Virtual Environment,” in 15th
European Simulation Symposium (ESS 2003), 2003, pp. 367–371.
mla: Mueck, Bengt, et al. “Components for the Active Support of the Analysis of
Material Flow Simulations in a Virtual Environment.” 15th European Simulation
Symposium (ESS 2003), SCS - Europe, 2003, pp. 367–71.
short: 'B. Mueck, W. Dangelmaier, M. Fischer, in: 15th European Simulation Symposium
(ESS 2003), SCS - Europe, 2003, pp. 367–371.'
date_created: 2020-07-28T08:05:14Z
date_updated: 2022-01-06T06:53:11Z
department:
- _id: '63'
language:
- iso: eng
page: 367-371
publication: 15th European Simulation Symposium (ESS 2003)
publisher: SCS - Europe
status: public
title: Components for the Active Support of the Analysis of Material Flow Simulations
in a Virtual Environment
type: conference
user_id: '15415'
year: '2003'
...
---
_id: '18372'
abstract:
- lang: ger
text: "Simulation und Visualisierung sind anerkannte Mittel zum Verstehen und Analysieren
von Fertigungsprozessen. In Visualisierungen von Fertigungsprozessen können Betrachter
frei und ungeleitet umherwandern. Erkenntnisse werden so aber eher zufällig erworben.
Dieser Artikel skizziert ein System und Methoden, die den Betrachter unterstützen
auf auffällige/signifikante Prozesse/ Punkte in Materialflusssimulationen aufmerksam
zu werden und diese zu entschärfen.\r\nEs wird der Entwurf eines Werkzeugs beschrieben,
dass den Betrachter einer Simulation die Möglichkeit bietet, signifikante Produktionsprozesse
interaktiv zu verbessern. Der Benutzer wird sich in einer virtuellen 3D-Umgebung
(Walkthrough-System) bewegen können und automatisch ermittelte Indizien für signifikante
Abläufe erhalten. Zugleich soll die Simulation signifikante Objekte genauer simulieren.
Bekundet der Benutzer Interesse an einem signifikanten Prozess, wird er automatisch
zu dem jeweiligen Ort geführt werden und dort durch Eingriffe in die Simulation
die kritische Situation experimentell untersuchen können. Da der kritische Moment
in der Vergangenheit liegt und somit vom Betrachter schon verpasst ist, wird es
dem Betrachter möglich sein, die Simulation auf einen Zeitpunkt vor dem Eintreten
zurück zu setzen.\r\nDie virtuelle Szene (3D-Grafik-Modelle) einer typischen dynamischen
Simulationsumgebung ist in der Regel zu komplex, um sie in Echtzeit in einem Walkthrough-System
zu visualisieren und darzustellen. Typischerweise werden Approximationsverfahren
eingesetzt, um die Komplexität zu reduzieren und ein flüssiges Navigieren des
Betrachters zu erlauben. Durch spezifische Simulations-Anforderungen ist bekannt,
an welchen Objekten des Simulationsmodells Probleme auftreten; sie sind für den
Betrachter wichtig. Die zugehörigen virtuellen 3D-Repräsentanten, können von den
Approximationsalgorithmen mit einer besonders hohen Darstellungsqualität dargestellt
werden und die übrigen Teile der virtuellen Szene entsprechend vernachlässigt
werden. Solche Approximationsalgorithmen und Datenstrukturen nutzen die spezifischen
Eigenschaften virtueller Simulationsumgebungen aus, um eine hohe Darstellungsqualität
und Darstellungsperformance zu erreichen.\r\n"
author:
- first_name: Wilhelm
full_name: Dangelmaier, Wilhelm
last_name: Dangelmaier
- first_name: Werner
full_name: ' Franke, Werner'
last_name: ' Franke'
- first_name: Bengt
full_name: Mueck, Bengt
last_name: Mueck
- first_name: Matthias
full_name: Fischer, Matthias
id: '146'
last_name: Fischer
citation:
ama: 'Dangelmaier W, Franke W, Mueck B, Fischer M. Komponenten zur aktiven Unterstützung
der Analyse von Materialflusssimulationen in virtuellen Umgebungen. In: 2.
Paderborner Workshop Augmented & Virtual Reality in Der Produktentstehung.
Vol 123. Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn. ; 2003:141-151.'
apa: Dangelmaier, W., Franke, W., Mueck, B., & Fischer, M. (2003). Komponenten
zur aktiven Unterstützung der Analyse von Materialflusssimulationen in virtuellen
Umgebungen. In 2. Paderborner Workshop Augmented & Virtual Reality in der
Produktentstehung (Vol. 123, pp. 141–151).
bibtex: '@inproceedings{Dangelmaier_ Franke_Mueck_Fischer_2003, series={Verlagsschriftenreihe
des Heinz Nixdorf Instituts, Paderborn}, title={Komponenten zur aktiven Unterstützung
der Analyse von Materialflusssimulationen in virtuellen Umgebungen}, volume={123},
booktitle={2. Paderborner Workshop Augmented & Virtual Reality in der Produktentstehung},
author={Dangelmaier, Wilhelm and Franke, Werner and Mueck, Bengt and Fischer,
Matthias}, year={2003}, pages={141–151}, collection={Verlagsschriftenreihe des
Heinz Nixdorf Instituts, Paderborn} }'
chicago: Dangelmaier, Wilhelm, Werner Franke, Bengt Mueck, and Matthias Fischer.
“Komponenten Zur Aktiven Unterstützung Der Analyse von Materialflusssimulationen
in Virtuellen Umgebungen.” In 2. Paderborner Workshop Augmented & Virtual
Reality in Der Produktentstehung, 123:141–51. Verlagsschriftenreihe Des Heinz
Nixdorf Instituts, Paderborn, 2003.
ieee: W. Dangelmaier, W. Franke, B. Mueck, and M. Fischer, “Komponenten zur aktiven
Unterstützung der Analyse von Materialflusssimulationen in virtuellen Umgebungen,”
in 2. Paderborner Workshop Augmented & Virtual Reality in der Produktentstehung,
2003, vol. 123, pp. 141–151.
mla: Dangelmaier, Wilhelm, et al. “Komponenten Zur Aktiven Unterstützung Der Analyse
von Materialflusssimulationen in Virtuellen Umgebungen.” 2. Paderborner Workshop
Augmented & Virtual Reality in Der Produktentstehung, vol. 123, 2003,
pp. 141–51.
short: 'W. Dangelmaier, W. Franke, B. Mueck, M. Fischer, in: 2. Paderborner Workshop
Augmented & Virtual Reality in Der Produktentstehung, 2003, pp. 141–151.'
date_created: 2020-08-26T13:16:08Z
date_updated: 2022-01-06T06:53:31Z
ddc:
- '000'
department:
- _id: '63'
file:
- access_level: closed
content_type: application/pdf
creator: koala
date_created: 2020-08-26T13:15:56Z
date_updated: 2020-08-26T13:15:56Z
file_id: '18373'
file_name: hni-id-1340.pdf
file_size: 166316
relation: main_file
success: 1
file_date_updated: 2020-08-26T13:15:56Z
has_accepted_license: '1'
intvolume: ' 123'
language:
- iso: eng
page: 141-151
publication: 2. Paderborner Workshop Augmented & Virtual Reality in der Produktentstehung
series_title: Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn
status: public
title: Komponenten zur aktiven Unterstützung der Analyse von Materialflusssimulationen
in virtuellen Umgebungen
type: conference
user_id: '15415'
volume: 123
year: '2003'
...
---
_id: '18369'
abstract:
- lang: eng
text: "Visualising is a method used to help experiencing and understanding causal
cohesions in simulation processes. For this purpose, tools for visualising are
already implemented in prevalent simulation systems. The user creates his simulation
model and generates a 3-dimensional (2,5-dimensional) visualising by means of
the simulation system. This helps examining the process which makes it easier
for the viewer to \x93understand\x94 it. Simulation tools usually only provide
the opportunity for a unidirectional visualising. In a 3-dimensional surrounding
the viewer can not implement an interaction with the simulation while the system
is running. Though an interaction during the simulation run enables the user to
gain a better understanding of causal cohesions. Solutions via HLA are sophisticated
and therefore rather suited for extensive projects.\r\nWe present a distributed
system consisting of a commercial manufacturing simulation tool, a coupling module
and a walkthrough system. The distributed system in conjunctions with the coupling
module guarantees generality and a wide field of applications of the walkthrough
system. Further it guarantees flexibility and selection of the specialized graphics
hardware for the walkthrough system. A further contribution of this paper is the
solution of the time synchronisation problem caused by simulation tool and walkthrough
system.\r\n"
author:
- first_name: Bengt
full_name: Mueck, Bengt
last_name: Mueck
- first_name: Wilhelm
full_name: Dangelmaier, Wilhelm
last_name: Dangelmaier
- first_name: Matthias
full_name: Fischer, Matthias
id: '146'
last_name: Fischer
- first_name: Wolfram
full_name: Klemisch, Wolfram
last_name: Klemisch
citation:
ama: 'Mueck B, Dangelmaier W, Fischer M, Klemisch W. Bi-directional Coupling of
Simulation Tools with a Walkthrough-System. In: Simulation Und Visualisierung.
Ghent, BE: SCS European Publishing House; 2002:71-84.'
apa: 'Mueck, B., Dangelmaier, W., Fischer, M., & Klemisch, W. (2002). Bi-directional
Coupling of Simulation Tools with a Walkthrough-System. In Simulation und Visualisierung
(pp. 71–84). Ghent, BE: SCS European Publishing House.'
bibtex: '@inproceedings{Mueck_Dangelmaier_Fischer_Klemisch_2002, place={Ghent, BE},
title={Bi-directional Coupling of Simulation Tools with a Walkthrough-System},
booktitle={Simulation und Visualisierung}, publisher={SCS European Publishing
House}, author={Mueck, Bengt and Dangelmaier, Wilhelm and Fischer, Matthias and
Klemisch, Wolfram}, year={2002}, pages={71–84} }'
chicago: 'Mueck, Bengt, Wilhelm Dangelmaier, Matthias Fischer, and Wolfram Klemisch.
“Bi-Directional Coupling of Simulation Tools with a Walkthrough-System.” In Simulation
Und Visualisierung, 71–84. Ghent, BE: SCS European Publishing House, 2002.'
ieee: B. Mueck, W. Dangelmaier, M. Fischer, and W. Klemisch, “Bi-directional Coupling
of Simulation Tools with a Walkthrough-System,” in Simulation und Visualisierung,
2002, pp. 71–84.
mla: Mueck, Bengt, et al. “Bi-Directional Coupling of Simulation Tools with a Walkthrough-System.”
Simulation Und Visualisierung, SCS European Publishing House, 2002, pp.
71–84.
short: 'B. Mueck, W. Dangelmaier, M. Fischer, W. Klemisch, in: Simulation Und Visualisierung,
SCS European Publishing House, Ghent, BE, 2002, pp. 71–84.'
date_created: 2020-08-26T13:01:43Z
date_updated: 2022-01-06T06:53:30Z
department:
- _id: '63'
language:
- iso: eng
page: 71-84
place: Ghent, BE
publication: Simulation und Visualisierung
publisher: SCS European Publishing House
status: public
title: Bi-directional Coupling of Simulation Tools with a Walkthrough-System
type: conference
user_id: '15415'
year: '2002'
...
---
_id: '23943'
author:
- first_name: Wilhelm
full_name: Dangelmaier, Wilhelm
last_name: Dangelmaier
citation:
ama: Dangelmaier W. KOMNET - Kommunikationsplattform für kmU-Netzwerke. Vol
41. Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn; 1998.
apa: Dangelmaier, W. (1998). KOMNET - Kommunikationsplattform für kmU-Netzwerke
(Vol. 41). Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn.
bibtex: '@book{Dangelmaier_1998, series={Verlagsschriftenreihe des Heinz Nixdorf
Instituts, Paderborn}, title={KOMNET - Kommunikationsplattform für kmU-Netzwerke},
volume={41}, publisher={Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn},
author={Dangelmaier, Wilhelm}, year={1998}, collection={Verlagsschriftenreihe
des Heinz Nixdorf Instituts, Paderborn} }'
chicago: Dangelmaier, Wilhelm. KOMNET - Kommunikationsplattform für kmU-Netzwerke.
Vol. 41. Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn. Verlagsschriftenreihe
des Heinz Nixdorf Instituts, Paderborn, 1998.
ieee: W. Dangelmaier, KOMNET - Kommunikationsplattform für kmU-Netzwerke,
vol. 41. Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 1998.
mla: Dangelmaier, Wilhelm. KOMNET - Kommunikationsplattform für kmU-Netzwerke.
Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 1998.
short: W. Dangelmaier, KOMNET - Kommunikationsplattform für kmU-Netzwerke, Verlagsschriftenreihe
des Heinz Nixdorf Instituts, Paderborn, 1998.
date_created: 2021-09-08T09:02:58Z
date_updated: 2022-01-06T06:56:04Z
department:
- _id: '26'
intvolume: ' 41'
language:
- iso: ger
publication_status: published
publisher: Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn
series_title: Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn
status: public
title: KOMNET - Kommunikationsplattform für kmU-Netzwerke
type: book
user_id: '60046'
volume: 41
year: '1998'
...