--- _id: '60566' article_number: '074402' author: - first_name: Adriana full_name: Bocchini, Adriana id: '58349' last_name: Bocchini orcid: 0000-0002-2134-3075 - first_name: Michael full_name: Rüsing, Michael id: '22501' last_name: Rüsing orcid: 0000-0003-4682-4577 - first_name: Laura full_name: Bollmers, Laura id: '61375' last_name: Bollmers - first_name: Sebastian full_name: Lengeling, Sebastian id: '44373' last_name: Lengeling - first_name: Philipp full_name: Mues, Philipp id: '49772' last_name: Mues orcid: 0000-0003-0643-7636 - first_name: Laura full_name: Padberg, Laura id: '40300' last_name: Padberg - first_name: Uwe full_name: Gerstmann, Uwe id: '171' last_name: Gerstmann orcid: 0000-0002-4476-223X - first_name: Christine full_name: Silberhorn, Christine id: '26263' last_name: Silberhorn - first_name: Christof full_name: Eigner, Christof id: '13244' last_name: Eigner orcid: https://orcid.org/0000-0002-5693-3083 - first_name: Wolf Gero full_name: Schmidt, Wolf Gero id: '468' last_name: Schmidt orcid: 0000-0002-2717-5076 citation: ama: 'Bocchini A, Rüsing M, Bollmers L, et al. Mg dopants in lithium niobate: Defect models and impact on domain inversion. Physical Review Materials. 2025;9(7). doi:10.1103/5wz1-bjyr' apa: 'Bocchini, A., Rüsing, M., Bollmers, L., Lengeling, S., Mues, P., Padberg, L., Gerstmann, U., Silberhorn, C., Eigner, C., & Schmidt, W. G. (2025). Mg dopants in lithium niobate: Defect models and impact on domain inversion. Physical Review Materials, 9(7), Article 074402. https://doi.org/10.1103/5wz1-bjyr' bibtex: '@article{Bocchini_Rüsing_Bollmers_Lengeling_Mues_Padberg_Gerstmann_Silberhorn_Eigner_Schmidt_2025, title={Mg dopants in lithium niobate: Defect models and impact on domain inversion}, volume={9}, DOI={10.1103/5wz1-bjyr}, number={7074402}, journal={Physical Review Materials}, publisher={American Physical Society (APS)}, author={Bocchini, Adriana and Rüsing, Michael and Bollmers, Laura and Lengeling, Sebastian and Mues, Philipp and Padberg, Laura and Gerstmann, Uwe and Silberhorn, Christine and Eigner, Christof and Schmidt, Wolf Gero}, year={2025} }' chicago: 'Bocchini, Adriana, Michael Rüsing, Laura Bollmers, Sebastian Lengeling, Philipp Mues, Laura Padberg, Uwe Gerstmann, Christine Silberhorn, Christof Eigner, and Wolf Gero Schmidt. “Mg Dopants in Lithium Niobate: Defect Models and Impact on Domain Inversion.” Physical Review Materials 9, no. 7 (2025). https://doi.org/10.1103/5wz1-bjyr.' ieee: 'A. Bocchini et al., “Mg dopants in lithium niobate: Defect models and impact on domain inversion,” Physical Review Materials, vol. 9, no. 7, Art. no. 074402, 2025, doi: 10.1103/5wz1-bjyr.' mla: 'Bocchini, Adriana, et al. “Mg Dopants in Lithium Niobate: Defect Models and Impact on Domain Inversion.” Physical Review Materials, vol. 9, no. 7, 074402, American Physical Society (APS), 2025, doi:10.1103/5wz1-bjyr.' short: A. Bocchini, M. Rüsing, L. Bollmers, S. Lengeling, P. Mues, L. Padberg, U. Gerstmann, C. Silberhorn, C. Eigner, W.G. Schmidt, Physical Review Materials 9 (2025). date_created: 2025-07-09T09:13:24Z date_updated: 2026-03-17T17:50:06Z ddc: - '530' department: - _id: '15' - _id: '623' - _id: '295' - _id: '790' - _id: '288' - _id: '230' - _id: '429' - _id: '35' - _id: '170' - _id: '169' - _id: '27' doi: 10.1103/5wz1-bjyr file: - access_level: open_access content_type: application/pdf creator: adrianab date_created: 2025-07-09T09:18:45Z date_updated: 2025-07-10T06:43:34Z file_id: '60567' file_name: Mg_dopants_LN_PRM.pdf file_size: 4175120 relation: main_file file_date_updated: 2025-07-10T06:43:34Z has_accepted_license: '1' intvolume: ' 9' issue: '7' language: - iso: eng main_file_link: - open_access: '1' url: https://link.aps.org/doi/10.1103/5wz1-bjyr oa: '1' project: - _id: '52' name: 'PC2: Computing Resources Provided by the Paderborn Center for Parallel Computing' - _id: '53' name: 'TRR 142: TRR 142 - Maßgeschneiderte nichtlineare Photonik: Von grundlegenden Konzepten zu funktionellen Strukturen' - _id: '55' name: 'TRR 142 - B: TRR 142 - Project Area B' - _id: '54' name: 'TRR 142 - A: TRR 142 - Project Area A' - _id: '168' name: 'TRR 142 - B07: TRR 142 - Polaronen-Einfluss auf die optischen Eigenschaften von Lithiumniobat (B07*)' - _id: '166' name: 'TRR 142 - A11: TRR 142 - Subproject A11' publication: Physical Review Materials publication_identifier: issn: - 2475-9953 publication_status: published publisher: American Physical Society (APS) status: public title: 'Mg dopants in lithium niobate: Defect models and impact on domain inversion' type: journal_article user_id: '22501' volume: 9 year: '2025' ... --- _id: '64905' author: - first_name: Meghyn full_name: Bienvenu, Meghyn last_name: Bienvenu - first_name: Camille full_name: Bourgaux, Camille last_name: Bourgaux - first_name: Atefe full_name: Khodadaditaghanaki, Atefe id: '114980' last_name: Khodadaditaghanaki citation: ama: 'Bienvenu M, Bourgaux C, Khodadaditaghanaki A. Inconsistency Handling in DatalogMTL. In: Kwok J, ed. Proceedings of the Thirty-Fourth International Joint Conference on Artificial Intelligence, {IJCAI-25}. International Joint Conferences on Artificial Intelligence Organization; 2025:4374–4381. doi:10.24963/ijcai.2025/487' apa: Bienvenu, M., Bourgaux, C., & Khodadaditaghanaki, A. (2025). Inconsistency Handling in DatalogMTL. In J. Kwok (Ed.), Proceedings of the Thirty-Fourth International Joint Conference on Artificial Intelligence, {IJCAI-25} (pp. 4374–4381). International Joint Conferences on Artificial Intelligence Organization. https://doi.org/10.24963/ijcai.2025/487 bibtex: '@inproceedings{Bienvenu_Bourgaux_Khodadaditaghanaki_2025, title={Inconsistency Handling in DatalogMTL}, DOI={10.24963/ijcai.2025/487}, booktitle={Proceedings of the Thirty-Fourth International Joint Conference on Artificial Intelligence, {IJCAI-25}}, publisher={International Joint Conferences on Artificial Intelligence Organization}, author={Bienvenu, Meghyn and Bourgaux, Camille and Khodadaditaghanaki, Atefe}, editor={Kwok, James}, year={2025}, pages={4374–4381} }' chicago: Bienvenu, Meghyn, Camille Bourgaux, and Atefe Khodadaditaghanaki. “Inconsistency Handling in DatalogMTL.” In Proceedings of the Thirty-Fourth International Joint Conference on Artificial Intelligence, {IJCAI-25}, edited by James Kwok, 4374–4381. International Joint Conferences on Artificial Intelligence Organization, 2025. https://doi.org/10.24963/ijcai.2025/487. ieee: 'M. Bienvenu, C. Bourgaux, and A. Khodadaditaghanaki, “Inconsistency Handling in DatalogMTL,” in Proceedings of the Thirty-Fourth International Joint Conference on Artificial Intelligence, {IJCAI-25}, 2025, pp. 4374–4381, doi: 10.24963/ijcai.2025/487.' mla: Bienvenu, Meghyn, et al. “Inconsistency Handling in DatalogMTL.” Proceedings of the Thirty-Fourth International Joint Conference on Artificial Intelligence, {IJCAI-25}, edited by James Kwok, International Joint Conferences on Artificial Intelligence Organization, 2025, pp. 4374–4381, doi:10.24963/ijcai.2025/487. short: 'M. Bienvenu, C. Bourgaux, A. Khodadaditaghanaki, in: J. Kwok (Ed.), Proceedings of the Thirty-Fourth International Joint Conference on Artificial Intelligence, {IJCAI-25}, International Joint Conferences on Artificial Intelligence Organization, 2025, pp. 4374–4381.' date_created: 2026-03-12T11:39:11Z date_updated: 2026-03-17T12:54:10Z ddc: - '000' doi: 10.24963/ijcai.2025/487 editor: - first_name: James full_name: Kwok, James last_name: Kwok file: - access_level: closed content_type: application/pdf creator: atefe date_created: 2026-03-12T11:43:29Z date_updated: 2026-03-12T11:43:29Z file_id: '64906' file_name: Our Paper.pdf file_size: 197125 relation: main_file success: 1 file_date_updated: 2026-03-12T11:43:29Z has_accepted_license: '1' language: - iso: eng page: 4374–4381 publication: Proceedings of the Thirty-Fourth International Joint Conference on Artificial Intelligence, {IJCAI-25} publisher: International Joint Conferences on Artificial Intelligence Organization status: public title: Inconsistency Handling in DatalogMTL type: conference user_id: '114980' year: '2025' ... --- _id: '65034' author: - first_name: Johannes full_name: Schäfers, Johannes id: '68949' last_name: Schäfers - first_name: Mats full_name: Vernholz, Mats id: '76955' last_name: Vernholz orcid: 0000-0001-5175-357X - first_name: Gabriela full_name: Jonas-Ahrend, Gabriela id: '77633' last_name: Jonas-Ahrend orcid: 0000-0003-3898-954X - first_name: Katrin full_name: Temmen, Katrin id: '30086' last_name: Temmen citation: ama: 'Schäfers J, Vernholz M, Jonas-Ahrend G, Temmen K. Vom Prompt zur Praxis – Kooperatives Seminarkonzept zur KI-gestützten Unterrichtsentwicklung in der gewerblich-technischen Lehramtsausbildung. In: ; 2025.' apa: Schäfers, J., Vernholz, M., Jonas-Ahrend, G., & Temmen, K. (2025). Vom Prompt zur Praxis – Kooperatives Seminarkonzept zur KI-gestützten Unterrichtsentwicklung in der gewerblich-technischen Lehramtsausbildung. Künstliche Intelligenz in der Lehrkräftebildung, Potsdam. bibtex: '@inproceedings{Schäfers_Vernholz_Jonas-Ahrend_Temmen_2025, title={Vom Prompt zur Praxis – Kooperatives Seminarkonzept zur KI-gestützten Unterrichtsentwicklung in der gewerblich-technischen Lehramtsausbildung}, author={Schäfers, Johannes and Vernholz, Mats and Jonas-Ahrend, Gabriela and Temmen, Katrin}, year={2025} }' chicago: Schäfers, Johannes, Mats Vernholz, Gabriela Jonas-Ahrend, and Katrin Temmen. “Vom Prompt zur Praxis – Kooperatives Seminarkonzept zur KI-gestützten Unterrichtsentwicklung in der gewerblich-technischen Lehramtsausbildung,” 2025. ieee: J. Schäfers, M. Vernholz, G. Jonas-Ahrend, and K. Temmen, “Vom Prompt zur Praxis – Kooperatives Seminarkonzept zur KI-gestützten Unterrichtsentwicklung in der gewerblich-technischen Lehramtsausbildung,” presented at the Künstliche Intelligenz in der Lehrkräftebildung, Potsdam, 2025. mla: Schäfers, Johannes, et al. Vom Prompt zur Praxis – Kooperatives Seminarkonzept zur KI-gestützten Unterrichtsentwicklung in der gewerblich-technischen Lehramtsausbildung. 2025. short: 'J. Schäfers, M. Vernholz, G. Jonas-Ahrend, K. Temmen, in: 2025.' conference: end_date: 2025-09-17 location: Potsdam name: Künstliche Intelligenz in der Lehrkräftebildung start_date: 2025-09-16 date_created: 2026-03-17T14:09:57Z date_updated: 2026-03-17T14:10:17Z language: - iso: ger project: - _id: '1395' name: LehrKraft voraus! status: public title: Vom Prompt zur Praxis – Kooperatives Seminarkonzept zur KI-gestützten Unterrichtsentwicklung in der gewerblich-technischen Lehramtsausbildung type: conference user_id: '68949' year: '2025' ... --- _id: '65038' abstract: - lang: eng text: The rapid advancements in digital transformation have led to the emergence of dataspaces as a pivotal element for industry-wide and cross-industry data integration and interoperability across various businesses. Despite their potential, the adoption and effective utilization of dataspaces by business stakeholders remain challenging. This paper aims to address this gap by developing a comprehensive learning environment tailored for business stakeholders. Through an interview study and an analysis of the current state of research, we identify problem fields and derive key requirements for the development of the learning environment. The proposed environment includes a demonstrator and a training concept designed to enhance stakeholders' understanding and capabilities in managing and leveraging dataspaces. Our findings contribute to the body of knowledge by providing practical guidance through learning environments for the deployment of dataspaces in business contexts and highlighting areas for future research. author: - first_name: Jonas full_name: Lick, Jonas last_name: Lick - first_name: Jessica full_name: Lamarz, Jessica last_name: Lamarz - first_name: Friederike full_name: Dohmann, Friederike last_name: Dohmann - first_name: Pranav Jayant full_name: Kulkarni, Pranav Jayant id: '86782' last_name: Kulkarni - first_name: Julian full_name: Zerbin, Julian id: '51711' last_name: Zerbin - first_name: Christian full_name: Koldewey, Christian id: '43136' last_name: Koldewey orcid: https://orcid.org/0000-0001-7992-6399 citation: ama: 'Lick J, Lamarz J, Dohmann F, Kulkarni PJ, Zerbin J, Koldewey C. Guidance on Dataspaces: Development of a Learning Environment for Industrial SMEs. In: 2024 6th International Conference on Control and Robotics (ICCR). IEEE; 2025. doi:10.1109/iccr64365.2024.10927580' apa: 'Lick, J., Lamarz, J., Dohmann, F., Kulkarni, P. J., Zerbin, J., & Koldewey, C. (2025). Guidance on Dataspaces: Development of a Learning Environment for Industrial SMEs. 2024 6th International Conference on Control and Robotics (ICCR). 6th International Conference on Control and Robotics (ICCR), Yokohama, Japan . https://doi.org/10.1109/iccr64365.2024.10927580' bibtex: '@inproceedings{Lick_Lamarz_Dohmann_Kulkarni_Zerbin_Koldewey_2025, title={Guidance on Dataspaces: Development of a Learning Environment for Industrial SMEs}, DOI={10.1109/iccr64365.2024.10927580}, booktitle={2024 6th International Conference on Control and Robotics (ICCR)}, publisher={IEEE}, author={Lick, Jonas and Lamarz, Jessica and Dohmann, Friederike and Kulkarni, Pranav Jayant and Zerbin, Julian and Koldewey, Christian}, year={2025} }' chicago: 'Lick, Jonas, Jessica Lamarz, Friederike Dohmann, Pranav Jayant Kulkarni, Julian Zerbin, and Christian Koldewey. “Guidance on Dataspaces: Development of a Learning Environment for Industrial SMEs.” In 2024 6th International Conference on Control and Robotics (ICCR). IEEE, 2025. https://doi.org/10.1109/iccr64365.2024.10927580.' ieee: 'J. Lick, J. Lamarz, F. Dohmann, P. J. Kulkarni, J. Zerbin, and C. Koldewey, “Guidance on Dataspaces: Development of a Learning Environment for Industrial SMEs,” presented at the 6th International Conference on Control and Robotics (ICCR), Yokohama, Japan , 2025, doi: 10.1109/iccr64365.2024.10927580.' mla: 'Lick, Jonas, et al. “Guidance on Dataspaces: Development of a Learning Environment for Industrial SMEs.” 2024 6th International Conference on Control and Robotics (ICCR), IEEE, 2025, doi:10.1109/iccr64365.2024.10927580.' short: 'J. Lick, J. Lamarz, F. Dohmann, P.J. Kulkarni, J. Zerbin, C. Koldewey, in: 2024 6th International Conference on Control and Robotics (ICCR), IEEE, 2025.' conference: end_date: 2024-12-07 location: 'Yokohama, Japan ' name: 6th International Conference on Control and Robotics (ICCR) start_date: 2024-12-05 date_created: 2026-03-18T07:13:35Z date_updated: 2026-03-18T07:18:48Z department: - _id: '563' doi: 10.1109/iccr64365.2024.10927580 language: - iso: eng publication: 2024 6th International Conference on Control and Robotics (ICCR) publication_status: published publisher: IEEE quality_controlled: '1' status: public title: 'Guidance on Dataspaces: Development of a Learning Environment for Industrial SMEs' type: conference user_id: '51711' year: '2025' ... --- _id: '64984' author: - first_name: Florian full_name: Löhr, Florian id: '68303' last_name: Löhr - first_name: Elmar full_name: Moritzer, Elmar id: '20531' last_name: Moritzer - first_name: Benjamin full_name: Klie, Benjamin last_name: Klie - first_name: Ulrich full_name: Giese, Ulrich last_name: Giese citation: ama: 'Löhr F, Moritzer E, Klie B, Giese U. Untersuchung von Kombinationen aus Duroplasten und Elastomeren für den einstufigen 2K-Spritzgießprozess. In: Technomer 2025 - 29. Fachtagung Über Verarbeitung Und Anwendung von Polymeren. Vol 29. Fachtagung über Verarbeitung und Anwendung von Polymeren-Tagungsband, Technische Universität Chemnitz 06. bis 07. November 2025. ; 2025:25.' apa: 'Löhr, F., Moritzer, E., Klie, B., & Giese, U. (2025). Untersuchung von Kombinationen aus Duroplasten und Elastomeren für den einstufigen 2K-Spritzgießprozess. In Technomer 2025 - 29. Fachtagung über Verarbeitung und Anwendung von Polymeren: Vol. 29. Fachtagung über Verarbeitung und Anwendung von Polymeren-Tagungsband, Technische Universität Chemnitz 06. bis 07. November 2025 (p. 25).' bibtex: '@inbook{Löhr_Moritzer_Klie_Giese_2025, title={Untersuchung von Kombinationen aus Duroplasten und Elastomeren für den einstufigen 2K-Spritzgießprozess}, volume={29. Fachtagung über Verarbeitung und Anwendung von Polymeren-Tagungsband, Technische Universität Chemnitz 06. bis 07. November 2025}, booktitle={Technomer 2025 - 29. Fachtagung über Verarbeitung und Anwendung von Polymeren}, author={Löhr, Florian and Moritzer, Elmar and Klie, Benjamin and Giese, Ulrich}, year={2025}, pages={25} }' chicago: Löhr, Florian, Elmar Moritzer, Benjamin Klie, and Ulrich Giese. “Untersuchung von Kombinationen Aus Duroplasten Und Elastomeren Für Den Einstufigen 2K-Spritzgießprozess.” In Technomer 2025 - 29. Fachtagung Über Verarbeitung Und Anwendung von Polymeren, 29. Fachtagung über Verarbeitung und Anwendung von Polymeren-Tagungsband, Technische Universität Chemnitz 06. bis 07. November 2025:25, 2025. ieee: F. Löhr, E. Moritzer, B. Klie, and U. Giese, “Untersuchung von Kombinationen aus Duroplasten und Elastomeren für den einstufigen 2K-Spritzgießprozess,” in Technomer 2025 - 29. Fachtagung über Verarbeitung und Anwendung von Polymeren, vol. 29. Fachtagung über Verarbeitung und Anwendung von Polymeren-Tagungsband, Technische Universität Chemnitz 06. bis 07. November 2025, 2025, p. 25. mla: Löhr, Florian, et al. “Untersuchung von Kombinationen Aus Duroplasten Und Elastomeren Für Den Einstufigen 2K-Spritzgießprozess.” Technomer 2025 - 29. Fachtagung Über Verarbeitung Und Anwendung von Polymeren, vol. 29. Fachtagung über Verarbeitung und Anwendung von Polymeren-Tagungsband, Technische Universität Chemnitz 06. bis 07. November 2025, 2025, p. 25. short: 'F. Löhr, E. Moritzer, B. Klie, U. Giese, in: Technomer 2025 - 29. Fachtagung Über Verarbeitung Und Anwendung von Polymeren, 2025, p. 25.' conference: name: Technomer 2025 date_created: 2026-03-16T12:20:49Z date_updated: 2026-03-18T09:06:05Z department: - _id: '9' - _id: '367' - _id: '321' keyword: - BMC - Duroplast - Kautschuk - Mehrkomponenten - Spritzgießen language: - iso: eng page: '25' publication: Technomer 2025 - 29. Fachtagung über Verarbeitung und Anwendung von Polymeren status: public title: Untersuchung von Kombinationen aus Duroplasten und Elastomeren für den einstufigen 2K-Spritzgießprozess type: book_chapter user_id: '59363' volume: 29. Fachtagung über Verarbeitung und Anwendung von Polymeren -Tagungsband, Technische Universität Chemnitz 06. bis 07. November 2025 year: '2025' ... --- _id: '64993' author: - first_name: Florian full_name: Löhr, Florian id: '68303' last_name: Löhr citation: ama: 'Löhr F. Direkthaftung statt Klebstoff –Verbund von Duroplasten und Kautschuk im 2K-Spritzgießprozess. In: AZuR-Kolloquium 2025. ; 2025.' apa: Löhr, F. (2025). Direkthaftung statt Klebstoff –Verbund von Duroplasten und Kautschuk im 2K-Spritzgießprozess. AZuR-Kolloquium 2025. bibtex: '@inproceedings{Löhr_2025, title={Direkthaftung statt Klebstoff –Verbund von Duroplasten und Kautschuk im 2K-Spritzgießprozess}, booktitle={AZuR-Kolloquium 2025}, author={Löhr, Florian}, year={2025} }' chicago: Löhr, Florian. “Direkthaftung Statt Klebstoff –Verbund von Duroplasten Und Kautschuk Im 2K-Spritzgießprozess.” In AZuR-Kolloquium 2025, 2025. ieee: F. Löhr, “Direkthaftung statt Klebstoff –Verbund von Duroplasten und Kautschuk im 2K-Spritzgießprozess,” 2025. mla: Löhr, Florian. “Direkthaftung Statt Klebstoff –Verbund von Duroplasten Und Kautschuk Im 2K-Spritzgießprozess.” AZuR-Kolloquium 2025, 2025. short: 'F. Löhr, in: AZuR-Kolloquium 2025, 2025.' date_created: 2026-03-16T13:51:45Z date_updated: 2026-03-18T08:47:01Z department: - _id: '9' - _id: '321' - _id: '367' language: - iso: eng publication: AZuR-Kolloquium 2025 status: public title: Direkthaftung statt Klebstoff –Verbund von Duroplasten und Kautschuk im 2K-Spritzgießprozess type: conference user_id: '59363' year: '2025' ... --- _id: '64983' author: - first_name: Florian full_name: Löhr, Florian id: '68303' last_name: Löhr - first_name: Elmar full_name: Moritzer, Elmar id: '20531' last_name: Moritzer - first_name: Benjamin full_name: Klie, Benjamin last_name: Klie - first_name: Ulrich full_name: Giese, Ulrich last_name: Giese citation: ama: 'Löhr F, Moritzer E, Klie B, Giese U. Thermoset–Rubber 2K Composite Systems: Material Combinations and Interfacial Reactions in a One-Step Injection Molding Process. In: International Rubber Conference (IRC) 2025, Bangkok, BITEC; e-Abstract Book. ; 2025:227–228.' apa: 'Löhr, F., Moritzer, E., Klie, B., & Giese, U. (2025). Thermoset–Rubber 2K Composite Systems: Material Combinations and Interfacial Reactions in a One-Step Injection Molding Process. In International Rubber Conference (IRC) 2025, Bangkok, BITEC; e-abstract book (pp. 227–228).' bibtex: '@inbook{Löhr_Moritzer_Klie_Giese_2025, title={Thermoset–Rubber 2K Composite Systems: Material Combinations and Interfacial Reactions in a One-Step Injection Molding Process}, booktitle={International Rubber Conference (IRC) 2025, Bangkok, BITEC; e-abstract book}, author={Löhr, Florian and Moritzer, Elmar and Klie, Benjamin and Giese, Ulrich}, year={2025}, pages={227–228} }' chicago: 'Löhr, Florian, Elmar Moritzer, Benjamin Klie, and Ulrich Giese. “Thermoset–Rubber 2K Composite Systems: Material Combinations and Interfacial Reactions in a One-Step Injection Molding Process.” In International Rubber Conference (IRC) 2025, Bangkok, BITEC; e-Abstract Book, 227–228, 2025.' ieee: 'F. Löhr, E. Moritzer, B. Klie, and U. Giese, “Thermoset–Rubber 2K Composite Systems: Material Combinations and Interfacial Reactions in a One-Step Injection Molding Process,” in International Rubber Conference (IRC) 2025, Bangkok, BITEC; e-abstract book, 2025, pp. 227–228.' mla: 'Löhr, Florian, et al. “Thermoset–Rubber 2K Composite Systems: Material Combinations and Interfacial Reactions in a One-Step Injection Molding Process.” International Rubber Conference (IRC) 2025, Bangkok, BITEC; e-Abstract Book, 2025, pp. 227–228.' short: 'F. Löhr, E. Moritzer, B. Klie, U. Giese, in: International Rubber Conference (IRC) 2025, Bangkok, BITEC; e-Abstract Book, 2025, pp. 227–228.' conference: name: International Rubber Conference IRC 2025 date_created: 2026-03-16T12:20:49Z date_updated: 2026-03-18T09:07:10Z department: - _id: '9' - _id: '367' - _id: '321' keyword: - BMC - Duroplast - Kautschuk - Mehrkomponenten - Spritzgießen language: - iso: eng page: 227–228 publication: International Rubber Conference (IRC) 2025, Bangkok, BITEC; e-abstract book quality_controlled: '1' status: public title: 'Thermoset–Rubber 2K Composite Systems: Material Combinations and Interfacial Reactions in a One-Step Injection Molding Process' type: book_chapter user_id: '59363' year: '2025' ... --- _id: '65007' author: - first_name: Felix full_name: Knaup, Felix id: '45124' last_name: Knaup - first_name: Volker full_name: Schöppner, Volker id: '20530' last_name: Schöppner citation: ama: Knaup F, Schöppner V. Improvement of a numerical two-phase simulation model for single-screw plasticizing extruders based on experimental investigations. International Polymer Processing. Published online 2025. doi:10.1515/ipp-2025-0072 apa: Knaup, F., & Schöppner, V. (2025). Improvement of a numerical two-phase simulation model for single-screw plasticizing extruders based on experimental investigations. International Polymer Processing. https://doi.org/10.1515/ipp-2025-0072 bibtex: '@article{Knaup_Schöppner_2025, title={Improvement of a numerical two-phase simulation model for single-screw plasticizing extruders based on experimental investigations}, DOI={10.1515/ipp-2025-0072}, journal={International Polymer Processing}, author={Knaup, Felix and Schöppner, Volker}, year={2025} }' chicago: Knaup, Felix, and Volker Schöppner. “Improvement of a Numerical Two-Phase Simulation Model for Single-Screw Plasticizing Extruders Based on Experimental Investigations.” International Polymer Processing, 2025. https://doi.org/10.1515/ipp-2025-0072. ieee: 'F. Knaup and V. Schöppner, “Improvement of a numerical two-phase simulation model for single-screw plasticizing extruders based on experimental investigations,” International Polymer Processing, 2025, doi: 10.1515/ipp-2025-0072.' mla: Knaup, Felix, and Volker Schöppner. “Improvement of a Numerical Two-Phase Simulation Model for Single-Screw Plasticizing Extruders Based on Experimental Investigations.” International Polymer Processing, 2025, doi:10.1515/ipp-2025-0072. short: F. Knaup, V. Schöppner, International Polymer Processing (2025). date_created: 2026-03-16T14:23:34Z date_updated: 2026-03-18T09:17:45Z department: - _id: '9' - _id: '321' - _id: '367' doi: 10.1515/ipp-2025-0072 keyword: - CFD simulation - melting modeling - melting process - polymer extrusion - single-screw extruder language: - iso: eng publication: International Polymer Processing quality_controlled: '1' status: public title: Improvement of a numerical two-phase simulation model for single-screw plasticizing extruders based on experimental investigations type: journal_article user_id: '59363' year: '2025' ... --- _id: '65005' author: - first_name: Felix full_name: Knaup, Felix id: '45124' last_name: Knaup - first_name: Florian full_name: Brüning, Florian last_name: Brüning - first_name: Volker full_name: Schöppner, Volker id: '20530' last_name: Schöppner citation: ama: 'Knaup F, Brüning F, Schöppner V. Improving an Analytical Model of Melting in Single Screw Extruders considering the Delay Zone Length. In: Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2025). ; 2025.' apa: Knaup, F., Brüning, F., & Schöppner, V. (2025). Improving an Analytical Model of Melting in Single Screw Extruders considering the Delay Zone Length. Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2025). bibtex: '@inproceedings{Knaup_Brüning_Schöppner_2025, title={Improving an Analytical Model of Melting in Single Screw Extruders considering the Delay Zone Length}, booktitle={Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2025)}, author={Knaup, Felix and Brüning, Florian and Schöppner, Volker}, year={2025} }' chicago: Knaup, Felix, Florian Brüning, and Volker Schöppner. “Improving an Analytical Model of Melting in Single Screw Extruders Considering the Delay Zone Length.” In Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2025), 2025. ieee: F. Knaup, F. Brüning, and V. Schöppner, “Improving an Analytical Model of Melting in Single Screw Extruders considering the Delay Zone Length,” 2025. mla: Knaup, Felix, et al. “Improving an Analytical Model of Melting in Single Screw Extruders Considering the Delay Zone Length.” Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2025), 2025. short: 'F. Knaup, F. Brüning, V. Schöppner, in: Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2025), 2025.' date_created: 2026-03-16T14:23:34Z date_updated: 2026-03-18T09:23:35Z department: - _id: '9' - _id: '321' - _id: '367' keyword: - Aufschmelzen - Aufschmelzmodellierung - delay zone - extrusion - melting modeling language: - iso: eng publication: Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2025) quality_controlled: '1' status: public title: Improving an Analytical Model of Melting in Single Screw Extruders considering the Delay Zone Length type: conference user_id: '59363' year: '2025' ... --- _id: '65006' author: - first_name: Felix full_name: Knaup, Felix id: '45124' last_name: Knaup - first_name: Florian full_name: Brüning, Florian id: '72920' last_name: Brüning - first_name: Volker full_name: Schöppner, Volker id: '20530' last_name: Schöppner citation: ama: 'Knaup F, Brüning F, Schöppner V. Bestimmung der Feststoffbettfestigkeit zur Vorhersage von Feststoffbettbrüchen im Einschneckenextruder. In: Technomer 2025 29. Fachtagung. ; 2025.' apa: Knaup, F., Brüning, F., & Schöppner, V. (2025). Bestimmung der Feststoffbettfestigkeit zur Vorhersage von Feststoffbettbrüchen im Einschneckenextruder. Technomer 2025 29. Fachtagung. bibtex: '@inproceedings{Knaup_Brüning_Schöppner_2025, title={Bestimmung der Feststoffbettfestigkeit zur Vorhersage von Feststoffbettbrüchen im Einschneckenextruder}, booktitle={Technomer 2025 29. Fachtagung}, author={Knaup, Felix and Brüning, Florian and Schöppner, Volker}, year={2025} }' chicago: Knaup, Felix, Florian Brüning, and Volker Schöppner. “Bestimmung der Feststoffbettfestigkeit zur Vorhersage von Feststoffbettbrüchen im Einschneckenextruder.” In Technomer 2025 29. Fachtagung, 2025. ieee: F. Knaup, F. Brüning, and V. Schöppner, “Bestimmung der Feststoffbettfestigkeit zur Vorhersage von Feststoffbettbrüchen im Einschneckenextruder,” 2025. mla: Knaup, Felix, et al. “Bestimmung der Feststoffbettfestigkeit zur Vorhersage von Feststoffbettbrüchen im Einschneckenextruder.” Technomer 2025 29. Fachtagung, 2025. short: 'F. Knaup, F. Brüning, V. Schöppner, in: Technomer 2025 29. Fachtagung, 2025.' date_created: 2026-03-16T14:23:34Z date_updated: 2026-03-18T09:11:44Z department: - _id: '9' - _id: '321' - _id: '367' keyword: - Aufschmelzen - Aufschmelzmodellierung - Feststoffbett - melting modeling language: - iso: ger publication: Technomer 2025 29. Fachtagung publication_identifier: isbn: - 978-3-939382-17-1 status: public title: Bestimmung der Feststoffbettfestigkeit zur Vorhersage von Feststoffbettbrüchen im Einschneckenextruder type: conference user_id: '59363' year: '2025' ... --- _id: '65003' author: - first_name: Dennis full_name: Kleinschmidt, Dennis id: '40516' last_name: Kleinschmidt - first_name: Volker full_name: Schöppner, Volker id: '20530' last_name: Schöppner citation: ama: 'Kleinschmidt D, Schöppner V. Characterization of the wall slip behavior of filled rubber compounds considering the critical wall shear stress. In: Gummitekniska Förening S, ed. RubberCon 2025. ; 2025.' apa: Kleinschmidt, D., & Schöppner, V. (2025). Characterization of the wall slip behavior of filled rubber compounds considering the critical wall shear stress. In S. Gummitekniska Förening (Ed.), RubberCon 2025. bibtex: '@inproceedings{Kleinschmidt_Schöppner_2025, title={Characterization of the wall slip behavior of filled rubber compounds considering the critical wall shear stress}, booktitle={RubberCon 2025}, author={Kleinschmidt, Dennis and Schöppner, Volker}, editor={Gummitekniska Förening, Sveriges}, year={2025} }' chicago: Kleinschmidt, Dennis, and Volker Schöppner. “Characterization of the Wall Slip Behavior of Filled Rubber Compounds Considering the Critical Wall Shear Stress.” In RubberCon 2025, edited by Sveriges Gummitekniska Förening, 2025. ieee: D. Kleinschmidt and V. Schöppner, “Characterization of the wall slip behavior of filled rubber compounds considering the critical wall shear stress,” in RubberCon 2025, 2025. mla: Kleinschmidt, Dennis, and Volker Schöppner. “Characterization of the Wall Slip Behavior of Filled Rubber Compounds Considering the Critical Wall Shear Stress.” RubberCon 2025, edited by Sveriges Gummitekniska Förening, 2025. short: 'D. Kleinschmidt, V. Schöppner, in: S. Gummitekniska Förening (Ed.), RubberCon 2025, 2025.' date_created: 2026-03-16T14:23:34Z date_updated: 2026-03-18T09:10:31Z department: - _id: '9' - _id: '321' - _id: '367' editor: - first_name: Sveriges full_name: Gummitekniska Förening, Sveriges last_name: Gummitekniska Förening keyword: - Kautschuk - Rheologie - Wandgleiten language: - iso: eng publication: RubberCon 2025 status: public title: Characterization of the wall slip behavior of filled rubber compounds considering the critical wall shear stress type: conference user_id: '59363' year: '2025' ... --- _id: '65009' author: - first_name: Leon full_name: Schmidt, Leon id: '63035' last_name: Schmidt - first_name: Volker full_name: Schöppner, Volker id: '20530' last_name: Schöppner - first_name: Florian full_name: Brüning, Florian id: '72920' last_name: Brüning citation: ama: 'Schmidt L, Schöppner V, Brüning F. Findings on pinless screw design for rubber extrusion. In: Gummitekniska Förening S, Swedish N and F rubber associations, eds. RubberCon 2025. ; 2025.' apa: Schmidt, L., Schöppner, V., & Brüning, F. (2025). Findings on pinless screw design for rubber extrusion. In S. Gummitekniska Förening & N. and F. rubber associations Swedish (Eds.), RubberCon 2025. bibtex: '@inproceedings{Schmidt_Schöppner_Brüning_2025, title={Findings on pinless screw design for rubber extrusion}, booktitle={RubberCon 2025}, author={Schmidt, Leon and Schöppner, Volker and Brüning, Florian}, editor={Gummitekniska Förening, Sveriges and Swedish, Norwegian and Finnish rubber associations}, year={2025} }' chicago: Schmidt, Leon, Volker Schöppner, and Florian Brüning. “Findings on Pinless Screw Design for Rubber Extrusion.” In RubberCon 2025, edited by Sveriges Gummitekniska Förening and Norwegian and Finnish rubber associations Swedish, 2025. ieee: L. Schmidt, V. Schöppner, and F. Brüning, “Findings on pinless screw design for rubber extrusion,” in RubberCon 2025, 2025. mla: Schmidt, Leon, et al. “Findings on Pinless Screw Design for Rubber Extrusion.” RubberCon 2025, edited by Sveriges Gummitekniska Förening and Norwegian and Finnish rubber associations Swedish, 2025. short: 'L. Schmidt, V. Schöppner, F. Brüning, in: S. Gummitekniska Förening, N. and F. rubber associations Swedish (Eds.), RubberCon 2025, 2025.' date_created: 2026-03-16T14:23:35Z date_updated: 2026-03-18T09:08:34Z department: - _id: '9' - _id: '321' - _id: '367' editor: - first_name: Sveriges full_name: Gummitekniska Förening, Sveriges last_name: Gummitekniska Förening - first_name: Norwegian and Finnish rubber associations full_name: Swedish, Norwegian and Finnish rubber associations last_name: Swedish keyword: - extrusion - Kautschuk - Simulation language: - iso: eng publication: RubberCon 2025 status: public title: Findings on pinless screw design for rubber extrusion type: conference user_id: '59363' year: '2025' ... --- _id: '65008' author: - first_name: Leon full_name: Schmidt, Leon id: '63035' last_name: Schmidt - first_name: Florian full_name: Brüning, Florian id: '72920' last_name: Brüning citation: ama: Schmidt L, Brüning F. Investigation of alternative pinless screw concepts for rubber extrusion. KGK - Kautschuk Gummi Kunststoffe. 2025;78. Jahrgang(2/25):34–40. apa: Schmidt, L., & Brüning, F. (2025). Investigation of alternative pinless screw concepts for rubber extrusion. KGK - Kautschuk Gummi Kunststoffe, 78. Jahrgang(2/25), 34–40. bibtex: '@article{Schmidt_Brüning_2025, title={Investigation of alternative pinless screw concepts for rubber extrusion}, volume={78. Jahrgang}, number={2/25}, journal={KGK - Kautschuk Gummi Kunststoffe}, author={Schmidt, Leon and Brüning, Florian}, year={2025}, pages={34–40} }' chicago: 'Schmidt, Leon, and Florian Brüning. “Investigation of Alternative Pinless Screw Concepts for Rubber Extrusion.” KGK - Kautschuk Gummi Kunststoffe 78. Jahrgang, no. 2/25 (2025): 34–40.' ieee: L. Schmidt and F. Brüning, “Investigation of alternative pinless screw concepts for rubber extrusion,” KGK - Kautschuk Gummi Kunststoffe, vol. 78. Jahrgang, no. 2/25, pp. 34–40, 2025. mla: Schmidt, Leon, and Florian Brüning. “Investigation of Alternative Pinless Screw Concepts for Rubber Extrusion.” KGK - Kautschuk Gummi Kunststoffe, vol. 78. Jahrgang, no. 2/25, 2025, pp. 34–40. short: L. Schmidt, F. Brüning, KGK - Kautschuk Gummi Kunststoffe 78. Jahrgang (2025) 34–40. date_created: 2026-03-16T14:23:34Z date_updated: 2026-03-18T09:23:12Z department: - _id: '9' - _id: '321' - _id: '367' issue: 2/25 keyword: - extrusion - Kautschuk language: - iso: eng page: 34–40 publication: KGK - Kautschuk Gummi Kunststoffe status: public title: Investigation of alternative pinless screw concepts for rubber extrusion type: journal_article user_id: '59363' volume: 78. Jahrgang year: '2025' ... --- _id: '65000' author: - first_name: Felix Paul full_name: Hanselle, Felix Paul id: '62320' last_name: Hanselle - first_name: Volker full_name: Schöppner, Volker id: '20530' last_name: Schöppner - first_name: Florian full_name: Brüning, Florian id: '72920' last_name: Brüning citation: ama: Hanselle FP, Schöppner V, Brüning F. Consideration of modeled pressure dependent viscosity data in injection molding simulation. International Polymer Processing. Published online 2025. doi:10.1515/ipp-2025-0074 apa: Hanselle, F. P., Schöppner, V., & Brüning, F. (2025). Consideration of modeled pressure dependent viscosity data in injection molding simulation. International Polymer Processing. https://doi.org/10.1515/ipp-2025-0074 bibtex: '@article{Hanselle_Schöppner_Brüning_2025, title={Consideration of modeled pressure dependent viscosity data in injection molding simulation}, DOI={10.1515/ipp-2025-0074}, journal={International Polymer Processing}, author={Hanselle, Felix Paul and Schöppner, Volker and Brüning, Florian}, year={2025} }' chicago: Hanselle, Felix Paul, Volker Schöppner, and Florian Brüning. “Consideration of Modeled Pressure Dependent Viscosity Data in Injection Molding Simulation.” International Polymer Processing, 2025. https://doi.org/10.1515/ipp-2025-0074. ieee: 'F. P. Hanselle, V. Schöppner, and F. Brüning, “Consideration of modeled pressure dependent viscosity data in injection molding simulation,” International Polymer Processing, 2025, doi: 10.1515/ipp-2025-0074.' mla: Hanselle, Felix Paul, et al. “Consideration of Modeled Pressure Dependent Viscosity Data in Injection Molding Simulation.” International Polymer Processing, 2025, doi:10.1515/ipp-2025-0074. short: F.P. Hanselle, V. Schöppner, F. Brüning, International Polymer Processing (2025). date_created: 2026-03-16T14:23:33Z date_updated: 2026-03-18T09:25:09Z department: - _id: '9' - _id: '321' - _id: '367' doi: 10.1515/ipp-2025-0074 keyword: - Druckabhängigkeit - Rheologie - Simulation - Spritzgießen - Viskosität language: - iso: eng publication: International Polymer Processing quality_controlled: '1' status: public title: Consideration of modeled pressure dependent viscosity data in injection molding simulation type: journal_article user_id: '59363' year: '2025' ... --- _id: '65002' author: - first_name: Dennis full_name: Kleinschmidt, Dennis id: '40516' last_name: Kleinschmidt - first_name: Florian full_name: Brüning, Florian id: '72920' last_name: Brüning citation: ama: Kleinschmidt D, Brüning F. Influence of pre-shearing on the rheological properties of filled rubber compounds. KGK Kautschuk Gummi Kunststoffe. Published online 2025. apa: Kleinschmidt, D., & Brüning, F. (2025). Influence of pre-shearing on the rheological properties of filled rubber compounds. KGK Kautschuk Gummi Kunststoffe. bibtex: '@article{Kleinschmidt_Brüning_2025, title={Influence of pre-shearing on the rheological properties of filled rubber compounds}, journal={KGK Kautschuk Gummi Kunststoffe}, author={Kleinschmidt, Dennis and Brüning, Florian}, year={2025} }' chicago: Kleinschmidt, Dennis, and Florian Brüning. “Influence of Pre-Shearing on the Rheological Properties of Filled Rubber Compounds.” KGK Kautschuk Gummi Kunststoffe, 2025. ieee: D. Kleinschmidt and F. Brüning, “Influence of pre-shearing on the rheological properties of filled rubber compounds,” KGK Kautschuk Gummi Kunststoffe, 2025. mla: Kleinschmidt, Dennis, and Florian Brüning. “Influence of Pre-Shearing on the Rheological Properties of Filled Rubber Compounds.” KGK Kautschuk Gummi Kunststoffe, 2025. short: D. Kleinschmidt, F. Brüning, KGK Kautschuk Gummi Kunststoffe (2025). date_created: 2026-03-16T14:23:33Z date_updated: 2026-03-18T09:28:22Z department: - _id: '9' - _id: '321' - _id: '367' keyword: - Rheologie - Viskosität - Wandgleiten language: - iso: eng publication: KGK Kautschuk Gummi Kunststoffe quality_controlled: '1' status: public title: Influence of pre-shearing on the rheological properties of filled rubber compounds type: journal_article user_id: '59363' year: '2025' ... --- _id: '65046' author: - first_name: Dennis full_name: Kleinschmidt, Dennis id: '40516' last_name: Kleinschmidt citation: ama: 'Kleinschmidt D. Beschreibung des Mischverhaltens von Kautschukstiftextrudern mittels simulativer und experimenteller Methoden. In: Extrusion - Grundlagen und Praxis. ; 2025.' apa: Kleinschmidt, D. (2025). Beschreibung des Mischverhaltens von Kautschukstiftextrudern mittels simulativer und experimenteller Methoden. Extrusion - Grundlagen und Praxis. bibtex: '@inproceedings{Kleinschmidt_2025, place={Hannover}, title={Beschreibung des Mischverhaltens von Kautschukstiftextrudern mittels simulativer und experimenteller Methoden}, booktitle={Extrusion - Grundlagen und Praxis}, author={Kleinschmidt, Dennis}, year={2025} }' chicago: Kleinschmidt, Dennis. “Beschreibung des Mischverhaltens von Kautschukstiftextrudern mittels simulativer und experimenteller Methoden.” In Extrusion - Grundlagen und Praxis. Hannover, 2025. ieee: D. Kleinschmidt, “Beschreibung des Mischverhaltens von Kautschukstiftextrudern mittels simulativer und experimenteller Methoden,” 2025. mla: Kleinschmidt, Dennis. “Beschreibung des Mischverhaltens von Kautschukstiftextrudern mittels simulativer und experimenteller Methoden.” Extrusion - Grundlagen und Praxis, 2025. short: 'D. Kleinschmidt, in: Extrusion - Grundlagen und Praxis, Hannover, 2025.' date_created: 2026-03-18T09:45:57Z date_updated: 2026-03-18T09:45:59Z department: - _id: '9' - _id: '321' - _id: '367' language: - iso: ger place: Hannover publication: Extrusion - Grundlagen und Praxis status: public title: Beschreibung des Mischverhaltens von Kautschukstiftextrudern mittels simulativer und experimenteller Methoden type: conference user_id: '59363' year: '2025' ... --- _id: '65045' author: - first_name: Jonas Dirk Rudolf Helmut full_name: Petzke, Jonas Dirk Rudolf Helmut id: '57512' last_name: Petzke citation: ama: 'Petzke JDRH. Analyse des thermo-chemischen Devulkanisationsverhaltens von SBR-basierten GTR-Mischungen. In: AZuR-Kolloquium 2025. ; 2025.' apa: Petzke, J. D. R. H. (2025). Analyse des thermo-chemischen Devulkanisationsverhaltens von SBR-basierten GTR-Mischungen. AZuR-Kolloquium 2025. bibtex: '@inproceedings{Petzke_2025, title={Analyse des thermo-chemischen Devulkanisationsverhaltens von SBR-basierten GTR-Mischungen}, booktitle={AZuR-Kolloquium 2025}, author={Petzke, Jonas Dirk Rudolf Helmut}, year={2025} }' chicago: Petzke, Jonas Dirk Rudolf Helmut. “Analyse des thermo-chemischen Devulkanisationsverhaltens von SBR-basierten GTR-Mischungen.” In AZuR-Kolloquium 2025, 2025. ieee: J. D. R. H. Petzke, “Analyse des thermo-chemischen Devulkanisationsverhaltens von SBR-basierten GTR-Mischungen,” 2025. mla: Petzke, Jonas Dirk Rudolf Helmut. “Analyse des thermo-chemischen Devulkanisationsverhaltens von SBR-basierten GTR-Mischungen.” AZuR-Kolloquium 2025, 2025. short: 'J.D.R.H. Petzke, in: AZuR-Kolloquium 2025, 2025.' date_created: 2026-03-18T09:44:25Z date_updated: 2026-03-18T09:44:28Z department: - _id: '9' - _id: '321' - _id: '367' language: - iso: ger publication: AZuR-Kolloquium 2025 status: public title: Analyse des thermo-chemischen Devulkanisationsverhaltens von SBR-basierten GTR-Mischungen type: conference user_id: '59363' year: '2025' ... --- _id: '65042' author: - first_name: Felix Paul full_name: Hanselle, Felix Paul id: '62320' last_name: Hanselle citation: ama: 'Hanselle FP. Improvement of injection molding simulations by application of modeled pressure dependent viscosity data. In: ; 2025.' apa: Hanselle, F. P. (2025). Improvement of injection molding simulations by application of modeled pressure dependent viscosity data. bibtex: '@inproceedings{Hanselle_2025, title={Improvement of injection molding simulations by application of modeled pressure dependent viscosity data}, author={Hanselle, Felix Paul}, year={2025} }' chicago: Hanselle, Felix Paul. “Improvement of Injection Molding Simulations by Application of Modeled Pressure Dependent Viscosity Data,” 2025. ieee: F. P. Hanselle, “Improvement of injection molding simulations by application of modeled pressure dependent viscosity data,” 2025. mla: Hanselle, Felix Paul. Improvement of Injection Molding Simulations by Application of Modeled Pressure Dependent Viscosity Data. 2025. short: 'F.P. Hanselle, in: 2025.' date_created: 2026-03-18T09:41:09Z date_updated: 2026-03-18T09:41:14Z department: - _id: '9' - _id: '321' - _id: '367' language: - iso: eng status: public title: Improvement of injection molding simulations by application of modeled pressure dependent viscosity data type: conference user_id: '59363' year: '2025' ... --- _id: '65049' abstract: - lang: eng text: The degradation of polypropylene (PP) through thermal and mechanical stress, as well as the influence of oxygen, are unavoidable when processing on a co-rotating twin-screw extruder. In previous studies, a mathematical model was developed to predict the degradation while compounding on different twin-screw extruder sizes. Additionally, the examination of filled PPs was conducted. To this end, a range of operating parameters and extruder sizes were used to process PP, and the molar mass was then determined by melt flow rate (MFR) and gel permeation chromatography (GPC) measurements to derive the degree of degradation. The model was then modified by adjusting the sensitivity parameters to allow the degradation behavior of the PPs to be described independently of extruder size. Consistent with prior research, comprehensive measurements of a PP/titanium dioxide (TiO2) compound revealed that, with a few exceptions, increasing temperatures and screw speeds and decreasing throughputs generally resulted in higher degradation. However, the application of the model to the compounds did not achieve good agreement with the measured degradation, indicating different degradation conditions due to the different thermodynamic and rheological properties of the compounds. article_number: '1509' author: - first_name: Paul full_name: Albrecht, Paul id: '90467' last_name: Albrecht - first_name: Matthias full_name: Altepeter, Matthias last_name: Altepeter - first_name: Florian full_name: Brüning, Florian id: '72920' last_name: Brüning citation: ama: Albrecht P, Altepeter M, Brüning F. Degradation of Polypropylene and Polypropylene Compounds on Co-Rotating Twin-Screw Extruders. Polymers. 2025;17(11). doi:10.3390/polym17111509 apa: Albrecht, P., Altepeter, M., & Brüning, F. (2025). Degradation of Polypropylene and Polypropylene Compounds on Co-Rotating Twin-Screw Extruders. Polymers, 17(11), Article 1509. https://doi.org/10.3390/polym17111509 bibtex: '@article{Albrecht_Altepeter_Brüning_2025, title={Degradation of Polypropylene and Polypropylene Compounds on Co-Rotating Twin-Screw Extruders}, volume={17}, DOI={10.3390/polym17111509}, number={111509}, journal={Polymers}, publisher={MDPI AG}, author={Albrecht, Paul and Altepeter, Matthias and Brüning, Florian}, year={2025} }' chicago: Albrecht, Paul, Matthias Altepeter, and Florian Brüning. “Degradation of Polypropylene and Polypropylene Compounds on Co-Rotating Twin-Screw Extruders.” Polymers 17, no. 11 (2025). https://doi.org/10.3390/polym17111509. ieee: 'P. Albrecht, M. Altepeter, and F. Brüning, “Degradation of Polypropylene and Polypropylene Compounds on Co-Rotating Twin-Screw Extruders,” Polymers, vol. 17, no. 11, Art. no. 1509, 2025, doi: 10.3390/polym17111509.' mla: Albrecht, Paul, et al. “Degradation of Polypropylene and Polypropylene Compounds on Co-Rotating Twin-Screw Extruders.” Polymers, vol. 17, no. 11, 1509, MDPI AG, 2025, doi:10.3390/polym17111509. short: P. Albrecht, M. Altepeter, F. Brüning, Polymers 17 (2025). date_created: 2026-03-18T10:03:02Z date_updated: 2026-03-18T10:08:31Z doi: 10.3390/polym17111509 intvolume: ' 17' issue: '11' language: - iso: eng publication: Polymers publication_identifier: issn: - 2073-4360 publication_status: published publisher: MDPI AG quality_controlled: '1' status: public title: Degradation of Polypropylene and Polypropylene Compounds on Co-Rotating Twin-Screw Extruders type: journal_article user_id: '59363' volume: 17 year: '2025' ... --- _id: '63462' author: - first_name: Elmar full_name: Moritzer, Elmar id: '20531' last_name: Moritzer - first_name: Finn full_name: Bartmann, Finn last_name: Bartmann - first_name: Alexander full_name: Riedl, Alexander last_name: Riedl citation: ama: 'Moritzer E, Bartmann F, Riedl A. NUMERICAL AND EXPERIMENTAL CONSIDERATIONS OF THE CREEP OF THERMOPLASTIC FLANGE SYSTEMS FOR THE DEVELOPMENT OF AN ANALYTICAL CALCULATION METHOD. In: Proceedings of the ASME 2025 Pressure Vessels & Piping Conference PVP2025. ; 2025.' apa: Moritzer, E., Bartmann, F., & Riedl, A. (2025). NUMERICAL AND EXPERIMENTAL CONSIDERATIONS OF THE CREEP OF THERMOPLASTIC FLANGE SYSTEMS FOR THE DEVELOPMENT OF AN ANALYTICAL CALCULATION METHOD. Proceedings of the ASME 2025 Pressure Vessels & Piping Conference PVP2025. Proceedings of the ASME 2025 Pressure Vessels & Piping Conference PVP2025, Montreal, Quebec, Canada. bibtex: '@inproceedings{Moritzer_Bartmann_Riedl_2025, title={NUMERICAL AND EXPERIMENTAL CONSIDERATIONS OF THE CREEP OF THERMOPLASTIC FLANGE SYSTEMS FOR THE DEVELOPMENT OF AN ANALYTICAL CALCULATION METHOD}, booktitle={Proceedings of the ASME 2025 Pressure Vessels & Piping Conference PVP2025}, author={Moritzer, Elmar and Bartmann, Finn and Riedl, Alexander}, year={2025} }' chicago: Moritzer, Elmar, Finn Bartmann, and Alexander Riedl. “NUMERICAL AND EXPERIMENTAL CONSIDERATIONS OF THE CREEP OF THERMOPLASTIC FLANGE SYSTEMS FOR THE DEVELOPMENT OF AN ANALYTICAL CALCULATION METHOD.” In Proceedings of the ASME 2025 Pressure Vessels & Piping Conference PVP2025, 2025. ieee: E. Moritzer, F. Bartmann, and A. Riedl, “NUMERICAL AND EXPERIMENTAL CONSIDERATIONS OF THE CREEP OF THERMOPLASTIC FLANGE SYSTEMS FOR THE DEVELOPMENT OF AN ANALYTICAL CALCULATION METHOD,” presented at the Proceedings of the ASME 2025 Pressure Vessels & Piping Conference PVP2025, Montreal, Quebec, Canada, 2025. mla: Moritzer, Elmar, et al. “NUMERICAL AND EXPERIMENTAL CONSIDERATIONS OF THE CREEP OF THERMOPLASTIC FLANGE SYSTEMS FOR THE DEVELOPMENT OF AN ANALYTICAL CALCULATION METHOD.” Proceedings of the ASME 2025 Pressure Vessels & Piping Conference PVP2025, 2025. short: 'E. Moritzer, F. Bartmann, A. Riedl, in: Proceedings of the ASME 2025 Pressure Vessels & Piping Conference PVP2025, 2025.' conference: location: Montreal, Quebec, Canada name: Proceedings of the ASME 2025 Pressure Vessels & Piping Conference PVP2025 date_created: 2026-01-05T11:39:02Z date_updated: 2026-03-18T10:23:22Z department: - _id: '9' - _id: '321' - _id: '367' language: - iso: eng publication: Proceedings of the ASME 2025 Pressure Vessels & Piping Conference PVP2025 quality_controlled: '1' status: public title: NUMERICAL AND EXPERIMENTAL CONSIDERATIONS OF THE CREEP OF THERMOPLASTIC FLANGE SYSTEMS FOR THE DEVELOPMENT OF AN ANALYTICAL CALCULATION METHOD type: conference user_id: '59363' year: '2025' ...