--- _id: '48682' abstract: - lang: eng text: 'The present study investigates participants'' performance in two different mental body-rotation tasks (MBRTs) under conditions in which dynamic stability is challenged in two different balancing conditions: active balance control (Experiment 1), where participants actively maneuver, and re-active balance control (Experiment 2), where participants react to an external perturbation. The two MBRTs induced either an object-based spatial transformation (based on a same-different judgment) or an egocentric transformation (based on a left-right judgment). In Experiment 1, 48 participants were tested while standing on an even ground (low balancing requirements) or on a balance board (high balancing requirements). In Experiment 2, 32 participants performed while either standing still on a vibration plate or with the vibration plate moving in a low (20 Hz) or high (180 Hz) frequency. In both experiments, the results for response time and response error revealed effects of rotation angle and type of task. An effect of balancing condition was only observed for response error in Experiment 1. More precisely, response times and response errors increased for higher rotation angles. Also, performance was better for egocentric than for object-based spatial transformations. However, the different challenges to dynamic stability in Experiments 1 and 2 did not influence performance in the two MBRTs (except for response errors in Experiment 1) nor in a control condition (Experiment 1) without mental rotation.' article_number: '103156' article_type: original author: - first_name: Kirsten full_name: Budde, Kirsten id: '23188' last_name: Budde - first_name: Matthias full_name: Weigelt, Matthias id: '36388' last_name: Weigelt citation: ama: Budde K, Weigelt M. No effects of different perturbations on the performance in a mental body-rotation task (MBRT) with egocentric perspective transformations and object-based transformations. Human Movement Science. 2023;92. doi:10.1016/j.humov.2023.103156 apa: Budde, K., & Weigelt, M. (2023). No effects of different perturbations on the performance in a mental body-rotation task (MBRT) with egocentric perspective transformations and object-based transformations. Human Movement Science, 92, Article 103156. https://doi.org/10.1016/j.humov.2023.103156 bibtex: '@article{Budde_Weigelt_2023, title={No effects of different perturbations on the performance in a mental body-rotation task (MBRT) with egocentric perspective transformations and object-based transformations}, volume={92}, DOI={10.1016/j.humov.2023.103156}, number={103156}, journal={Human Movement Science}, publisher={Elsevier BV}, author={Budde, Kirsten and Weigelt, Matthias}, year={2023} }' chicago: Budde, Kirsten, and Matthias Weigelt. “No Effects of Different Perturbations on the Performance in a Mental Body-Rotation Task (MBRT) with Egocentric Perspective Transformations and Object-Based Transformations.” Human Movement Science 92 (2023). https://doi.org/10.1016/j.humov.2023.103156. ieee: 'K. Budde and M. Weigelt, “No effects of different perturbations on the performance in a mental body-rotation task (MBRT) with egocentric perspective transformations and object-based transformations,” Human Movement Science, vol. 92, Art. no. 103156, 2023, doi: 10.1016/j.humov.2023.103156.' mla: Budde, Kirsten, and Matthias Weigelt. “No Effects of Different Perturbations on the Performance in a Mental Body-Rotation Task (MBRT) with Egocentric Perspective Transformations and Object-Based Transformations.” Human Movement Science, vol. 92, 103156, Elsevier BV, 2023, doi:10.1016/j.humov.2023.103156. short: K. Budde, M. Weigelt, Human Movement Science 92 (2023). date_created: 2023-11-08T09:16:06Z date_updated: 2023-11-08T09:19:43Z department: - _id: '17' - _id: '266' doi: 10.1016/j.humov.2023.103156 intvolume: ' 92' keyword: - Mental rotation - Balance control - Perturbation - Embodiment language: - iso: eng publication: Human Movement Science publication_identifier: issn: - 0167-9457 publication_status: published publisher: Elsevier BV status: public title: No effects of different perturbations on the performance in a mental body-rotation task (MBRT) with egocentric perspective transformations and object-based transformations type: journal_article user_id: '23188' volume: 92 year: '2023' ... --- _id: '48739' author: - first_name: Elmar full_name: Moritzer, Elmar id: '20531' last_name: Moritzer - first_name: Christian Lennart full_name: Elsner, Christian Lennart id: '70729' last_name: Elsner - first_name: K. full_name: Deupmann, K. last_name: Deupmann citation: ama: 'Moritzer E, Elsner CL, Deupmann K. Investigation of the Volume Flow in the FFF Process as an Influencing Factor on the Resulting Orientation of Thermally Conductive Filler Particles. In: ; 2023.' apa: Moritzer, E., Elsner, C. L., & Deupmann, K. (2023). Investigation of the Volume Flow in the FFF Process as an Influencing Factor on the Resulting Orientation of Thermally Conductive Filler Particles. 38th International Conference of the Polymer Processing Society (PPS), St. Gallen (Schweiz). bibtex: '@inproceedings{Moritzer_Elsner_Deupmann_2023, place={St. Gallen (Schweiz)}, title={Investigation of the Volume Flow in the FFF Process as an Influencing Factor on the Resulting Orientation of Thermally Conductive Filler Particles}, author={Moritzer, Elmar and Elsner, Christian Lennart and Deupmann, K.}, year={2023} }' chicago: Moritzer, Elmar, Christian Lennart Elsner, and K. Deupmann. “Investigation of the Volume Flow in the FFF Process as an Influencing Factor on the Resulting Orientation of Thermally Conductive Filler Particles.” St. Gallen (Schweiz), 2023. ieee: E. Moritzer, C. L. Elsner, and K. Deupmann, “Investigation of the Volume Flow in the FFF Process as an Influencing Factor on the Resulting Orientation of Thermally Conductive Filler Particles,” presented at the 38th International Conference of the Polymer Processing Society (PPS), St. Gallen (Schweiz), 2023. mla: Moritzer, Elmar, et al. Investigation of the Volume Flow in the FFF Process as an Influencing Factor on the Resulting Orientation of Thermally Conductive Filler Particles. 2023. short: 'E. Moritzer, C.L. Elsner, K. Deupmann, in: St. Gallen (Schweiz), 2023.' conference: location: St. Gallen (Schweiz) name: 38th International Conference of the Polymer Processing Society (PPS) date_created: 2023-11-09T13:00:49Z date_updated: 2023-11-09T13:01:03Z department: - _id: '9' - _id: '367' - _id: '321' language: - iso: eng place: St. Gallen (Schweiz) status: public title: Investigation of the Volume Flow in the FFF Process as an Influencing Factor on the Resulting Orientation of Thermally Conductive Filler Particles type: conference user_id: '44116' year: '2023' ... --- _id: '48738' author: - first_name: Volker full_name: Schöppner, Volker id: '20530' last_name: Schöppner - first_name: Dorte full_name: Trienens, Dorte id: '44116' last_name: Trienens citation: ama: 'Schöppner V, Trienens D. Investigation of the influence of screw geometry on the resulting melt quality for cast film extrusion. In: ; 2023.' apa: Schöppner, V., & Trienens, D. (2023). Investigation of the influence of screw geometry on the resulting melt quality for cast film extrusion. 38th International Conference of the Polymer Processing Society, St. Gallen (Schweiz). bibtex: '@inproceedings{Schöppner_Trienens_2023, place={St. Gallen (Schweiz)}, title={Investigation of the influence of screw geometry on the resulting melt quality for cast film extrusion}, author={Schöppner, Volker and Trienens, Dorte}, year={2023} }' chicago: Schöppner, Volker, and Dorte Trienens. “Investigation of the Influence of Screw Geometry on the Resulting Melt Quality for Cast Film Extrusion.” St. Gallen (Schweiz), 2023. ieee: V. Schöppner and D. Trienens, “Investigation of the influence of screw geometry on the resulting melt quality for cast film extrusion,” presented at the 38th International Conference of the Polymer Processing Society, St. Gallen (Schweiz), 2023. mla: Schöppner, Volker, and Dorte Trienens. Investigation of the Influence of Screw Geometry on the Resulting Melt Quality for Cast Film Extrusion. 2023. short: 'V. Schöppner, D. Trienens, in: St. Gallen (Schweiz), 2023.' conference: location: St. Gallen (Schweiz) name: 38th International Conference of the Polymer Processing Society date_created: 2023-11-09T12:58:08Z date_updated: 2023-11-09T12:58:13Z department: - _id: '9' - _id: '367' - _id: '321' language: - iso: eng place: St. Gallen (Schweiz) status: public title: Investigation of the influence of screw geometry on the resulting melt quality for cast film extrusion type: conference user_id: '44116' year: '2023' ... --- _id: '48734' author: - first_name: Elmar full_name: Moritzer, Elmar id: '20531' last_name: Moritzer - first_name: Frederik Marvin full_name: Mühlhoff, Frederik Marvin id: '41312' last_name: Mühlhoff - first_name: Dennis full_name: Rauen, Dennis id: '62033' last_name: Rauen - first_name: B. full_name: Kolbe, B. last_name: Kolbe - first_name: H. full_name: Schlee, H. last_name: Schlee - first_name: C. full_name: Hokamp, C. last_name: Hokamp citation: ama: Moritzer E, Mühlhoff FM, Rauen D, Kolbe B, Schlee H, Hokamp C. Großflächig, komplex? InMould-Plasma ist die Lösung! Kunststoffe. Published online 2023. apa: Moritzer, E., Mühlhoff, F. M., Rauen, D., Kolbe, B., Schlee, H., & Hokamp, C. (2023). Großflächig, komplex? InMould-Plasma ist die Lösung! Kunststoffe. bibtex: '@article{Moritzer_Mühlhoff_Rauen_Kolbe_Schlee_Hokamp_2023, title={Großflächig, komplex? InMould-Plasma ist die Lösung!}, journal={Kunststoffe}, author={Moritzer, Elmar and Mühlhoff, Frederik Marvin and Rauen, Dennis and Kolbe, B. and Schlee, H. and Hokamp, C.}, year={2023} }' chicago: Moritzer, Elmar, Frederik Marvin Mühlhoff, Dennis Rauen, B. Kolbe, H. Schlee, and C. Hokamp. “Großflächig, komplex? InMould-Plasma ist die Lösung!” Kunststoffe, 2023. ieee: E. Moritzer, F. M. Mühlhoff, D. Rauen, B. Kolbe, H. Schlee, and C. Hokamp, “Großflächig, komplex? InMould-Plasma ist die Lösung!,” Kunststoffe, 2023. mla: Moritzer, Elmar, et al. “Großflächig, komplex? InMould-Plasma ist die Lösung!” Kunststoffe, 2023. short: E. Moritzer, F.M. Mühlhoff, D. Rauen, B. Kolbe, H. Schlee, C. Hokamp, Kunststoffe (2023). date_created: 2023-11-09T12:49:18Z date_updated: 2023-11-09T12:49:28Z department: - _id: '9' - _id: '367' - _id: '321' language: - iso: ger publication: Kunststoffe status: public title: Großflächig, komplex? InMould-Plasma ist die Lösung! type: journal_article user_id: '44116' year: '2023' ... --- _id: '48733' author: - first_name: Elmar full_name: Moritzer, Elmar id: '20531' last_name: Moritzer - first_name: Stephan full_name: Kartelmeyer, Stephan last_name: Kartelmeyer - first_name: Dennis full_name: Kreamer, Dennis last_name: Kreamer - first_name: Christoph full_name: Jaroschek, Christoph last_name: Jaroschek citation: ama: Moritzer E, Kartelmeyer S, Kreamer D, Jaroschek C. Goodbye Hot Spots - with No Extra Energy Expenditure. Plastics Insights. 2023;(7/2023):38-41. apa: Moritzer, E., Kartelmeyer, S., Kreamer, D., & Jaroschek, C. (2023). Goodbye Hot Spots - with No Extra Energy Expenditure. Plastics Insights, 7/2023, 38–41. bibtex: '@article{Moritzer_Kartelmeyer_Kreamer_Jaroschek_2023, title={Goodbye Hot Spots - with No Extra Energy Expenditure}, number={7/2023}, journal={Plastics Insights}, author={Moritzer, Elmar and Kartelmeyer, Stephan and Kreamer, Dennis and Jaroschek, Christoph}, year={2023}, pages={38–41} }' chicago: 'Moritzer, Elmar, Stephan Kartelmeyer, Dennis Kreamer, and Christoph Jaroschek. “Goodbye Hot Spots - with No Extra Energy Expenditure.” Plastics Insights, no. 7/2023 (2023): 38–41.' ieee: E. Moritzer, S. Kartelmeyer, D. Kreamer, and C. Jaroschek, “Goodbye Hot Spots - with No Extra Energy Expenditure,” Plastics Insights, no. 7/2023, pp. 38–41, 2023. mla: Moritzer, Elmar, et al. “Goodbye Hot Spots - with No Extra Energy Expenditure.” Plastics Insights, no. 7/2023, 2023, pp. 38–41. short: E. Moritzer, S. Kartelmeyer, D. Kreamer, C. Jaroschek, Plastics Insights (2023) 38–41. date_created: 2023-11-09T12:46:47Z date_updated: 2023-11-09T12:52:58Z department: - _id: '9' - _id: '367' - _id: '321' issue: 7/2023 language: - iso: eng page: 38-41 publication: Plastics Insights status: public title: Goodbye Hot Spots - with No Extra Energy Expenditure type: journal_article user_id: '44116' year: '2023' ... --- _id: '48735' author: - first_name: Volker full_name: Schöppner, Volker id: '20530' last_name: Schöppner - first_name: Maximilian full_name: Frank, Maximilian id: '38255' last_name: Frank - first_name: Christoph Wilhelm Theodor full_name: Schall, Christoph Wilhelm Theodor id: '44224' last_name: Schall citation: ama: Schöppner V, Frank M, Schall CWT. Hauptsache, die Wellenlänge stimmt. Kunststoffe. 2023;(9/2023):76-78. apa: Schöppner, V., Frank, M., & Schall, C. W. T. (2023). Hauptsache, die Wellenlänge stimmt. Kunststoffe, 9/2023, 76–78. bibtex: '@article{Schöppner_Frank_Schall_2023, title={Hauptsache, die Wellenlänge stimmt}, number={9/2023}, journal={Kunststoffe}, author={Schöppner, Volker and Frank, Maximilian and Schall, Christoph Wilhelm Theodor}, year={2023}, pages={76–78} }' chicago: 'Schöppner, Volker, Maximilian Frank, and Christoph Wilhelm Theodor Schall. “Hauptsache, die Wellenlänge stimmt.” Kunststoffe, no. 9/2023 (2023): 76–78.' ieee: V. Schöppner, M. Frank, and C. W. T. Schall, “Hauptsache, die Wellenlänge stimmt,” Kunststoffe, no. 9/2023, pp. 76–78, 2023. mla: Schöppner, Volker, et al. “Hauptsache, die Wellenlänge stimmt.” Kunststoffe, no. 9/2023, 2023, pp. 76–78. short: V. Schöppner, M. Frank, C.W.T. Schall, Kunststoffe (2023) 76–78. date_created: 2023-11-09T12:52:23Z date_updated: 2023-11-09T12:52:26Z department: - _id: '9' - _id: '367' - _id: '321' issue: 9/2023 language: - iso: ger page: 76-78 publication: Kunststoffe status: public title: Hauptsache, die Wellenlänge stimmt type: journal_article user_id: '44116' year: '2023' ... --- _id: '48736' author: - first_name: Elmar full_name: Moritzer, Elmar id: '20531' last_name: Moritzer - first_name: Stephan full_name: Kartelmeyer, Stephan last_name: Kartelmeyer - first_name: Dennis full_name: Kraemer, Dennis last_name: Kraemer - first_name: Christoph full_name: Jaroschek, Christoph last_name: Jaroschek citation: ama: Moritzer E, Kartelmeyer S, Kraemer D, Jaroschek C. Hotspots ade - ohne Extra-Energieaufwand. Kunststoffe. 2023;(5/2023):64-66. apa: Moritzer, E., Kartelmeyer, S., Kraemer, D., & Jaroschek, C. (2023). Hotspots ade - ohne Extra-Energieaufwand. Kunststoffe, 5/2023, 64–66. bibtex: '@article{Moritzer_Kartelmeyer_Kraemer_Jaroschek_2023, title={Hotspots ade - ohne Extra-Energieaufwand}, number={5/2023}, journal={Kunststoffe}, author={Moritzer, Elmar and Kartelmeyer, Stephan and Kraemer, Dennis and Jaroschek, Christoph}, year={2023}, pages={64–66} }' chicago: 'Moritzer, Elmar, Stephan Kartelmeyer, Dennis Kraemer, and Christoph Jaroschek. “Hotspots ade - ohne Extra-Energieaufwand.” Kunststoffe, no. 5/2023 (2023): 64–66.' ieee: E. Moritzer, S. Kartelmeyer, D. Kraemer, and C. Jaroschek, “Hotspots ade - ohne Extra-Energieaufwand,” Kunststoffe, no. 5/2023, pp. 64–66, 2023. mla: Moritzer, Elmar, et al. “Hotspots ade - ohne Extra-Energieaufwand.” Kunststoffe, no. 5/2023, 2023, pp. 64–66. short: E. Moritzer, S. Kartelmeyer, D. Kraemer, C. Jaroschek, Kunststoffe (2023) 64–66. date_created: 2023-11-09T12:54:59Z date_updated: 2023-11-09T12:55:02Z department: - _id: '9' - _id: '367' - _id: '321' issue: 5/2023 language: - iso: ger page: 64-66 publication: Kunststoffe status: public title: Hotspots ade - ohne Extra-Energieaufwand type: journal_article user_id: '44116' year: '2023' ... --- _id: '48747' author: - first_name: Elmar full_name: Moritzer, Elmar id: '20531' last_name: Moritzer - first_name: Christian full_name: Held, Christian id: '40647' last_name: Held citation: ama: 'Moritzer E, Held C. Optimization of additively manufactured parts for direct screwing. In: Springer Verlag; 2023.' apa: Moritzer, E., & Held, C. (2023). Optimization of additively manufactured parts for direct screwing. 76th Annual Assembly and International Conference of the international Institute of Welding (IIW), Singapur (Singapur). bibtex: '@inproceedings{Moritzer_Held_2023, place={Singapur (Singapur)}, title={Optimization of additively manufactured parts for direct screwing}, publisher={Springer Verlag}, author={Moritzer, Elmar and Held, Christian}, year={2023} }' chicago: 'Moritzer, Elmar, and Christian Held. “Optimization of Additively Manufactured Parts for Direct Screwing.” Singapur (Singapur): Springer Verlag, 2023.' ieee: E. Moritzer and C. Held, “Optimization of additively manufactured parts for direct screwing,” presented at the 76th Annual Assembly and International Conference of the international Institute of Welding (IIW), Singapur (Singapur), 2023. mla: Moritzer, Elmar, and Christian Held. Optimization of Additively Manufactured Parts for Direct Screwing. Springer Verlag, 2023. short: 'E. Moritzer, C. Held, in: Springer Verlag, Singapur (Singapur), 2023.' conference: location: Singapur (Singapur) name: 76th Annual Assembly and International Conference of the international Institute of Welding (IIW) date_created: 2023-11-09T13:19:46Z date_updated: 2023-11-09T13:19:49Z department: - _id: '9' - _id: '367' - _id: '321' language: - iso: eng place: Singapur (Singapur) publisher: Springer Verlag status: public title: Optimization of additively manufactured parts for direct screwing type: conference user_id: '44116' year: '2023' ... --- _id: '48746' author: - first_name: Volker full_name: Schöppner, Volker id: '20530' last_name: Schöppner - first_name: Dennis full_name: Kleinschmidt, Dennis id: '40516' last_name: Kleinschmidt - first_name: C. full_name: Hopmann, C. last_name: Hopmann - first_name: C. full_name: Wiesel, C. last_name: Wiesel - first_name: U. full_name: Nillius, U. last_name: Nillius - first_name: M. full_name: Schön, M. last_name: Schön - first_name: A. full_name: Limper, A. last_name: Limper citation: ama: Schöppner V, Kleinschmidt D, Hopmann C, et al. Optimisation of the Simulation of Rubber Extrusion dies by means of the Integration of empirically determined characteristic Maps. KGK Kautschuk Gummi Kunststoffe. Published online 2023:47-52. apa: Schöppner, V., Kleinschmidt, D., Hopmann, C., Wiesel, C., Nillius, U., Schön, M., & Limper, A. (2023). Optimisation of the Simulation of Rubber Extrusion dies by means of the Integration of empirically determined characteristic Maps. KGK Kautschuk Gummi Kunststoffe, 47–52. bibtex: '@article{Schöppner_Kleinschmidt_Hopmann_Wiesel_Nillius_Schön_Limper_2023, title={Optimisation of the Simulation of Rubber Extrusion dies by means of the Integration of empirically determined characteristic Maps}, journal={KGK Kautschuk Gummi Kunststoffe}, author={Schöppner, Volker and Kleinschmidt, Dennis and Hopmann, C. and Wiesel, C. and Nillius, U. and Schön, M. and Limper, A.}, year={2023}, pages={47–52} }' chicago: Schöppner, Volker, Dennis Kleinschmidt, C. Hopmann, C. Wiesel, U. Nillius, M. Schön, and A. Limper. “Optimisation of the Simulation of Rubber Extrusion Dies by Means of the Integration of Empirically Determined Characteristic Maps.” KGK Kautschuk Gummi Kunststoffe, 2023, 47–52. ieee: V. Schöppner et al., “Optimisation of the Simulation of Rubber Extrusion dies by means of the Integration of empirically determined characteristic Maps,” KGK Kautschuk Gummi Kunststoffe, pp. 47–52, 2023. mla: Schöppner, Volker, et al. “Optimisation of the Simulation of Rubber Extrusion Dies by Means of the Integration of Empirically Determined Characteristic Maps.” KGK Kautschuk Gummi Kunststoffe, 2023, pp. 47–52. short: V. Schöppner, D. Kleinschmidt, C. Hopmann, C. Wiesel, U. Nillius, M. Schön, A. Limper, KGK Kautschuk Gummi Kunststoffe (2023) 47–52. date_created: 2023-11-09T13:17:42Z date_updated: 2023-11-09T13:17:47Z department: - _id: '9' - _id: '367' - _id: '321' language: - iso: eng page: 47-52 publication: KGK Kautschuk Gummi Kunststoffe status: public title: Optimisation of the Simulation of Rubber Extrusion dies by means of the Integration of empirically determined characteristic Maps type: journal_article user_id: '44116' year: '2023' ... --- _id: '48745' author: - first_name: Volker full_name: Schöppner, Volker id: '20530' last_name: Schöppner - first_name: Karina full_name: Gevers, Karina id: '83151' last_name: Gevers - first_name: M. full_name: Albrecht, M. last_name: Albrecht - first_name: A. full_name: Seefried, A. last_name: Seefried citation: ama: 'Schöppner V, Gevers K, Albrecht M, Seefried A. Mischmaterialschweißen von PC/ABS und PMMA beim Warmgasstumpfschweißen mit Runddüsen. In: ; 2023.' apa: Schöppner, V., Gevers, K., Albrecht, M., & Seefried, A. (2023). Mischmaterialschweißen von PC/ABS und PMMA beim Warmgasstumpfschweißen mit Runddüsen. 28. Technomer, Chemnitz (Deutschland). bibtex: '@inproceedings{Schöppner_Gevers_Albrecht_Seefried_2023, place={Chemnitz (Deutschland)}, title={Mischmaterialschweißen von PC/ABS und PMMA beim Warmgasstumpfschweißen mit Runddüsen}, author={Schöppner, Volker and Gevers, Karina and Albrecht, M. and Seefried, A.}, year={2023} }' chicago: Schöppner, Volker, Karina Gevers, M. Albrecht, and A. Seefried. “Mischmaterialschweißen von PC/ABS und PMMA beim Warmgasstumpfschweißen mit Runddüsen.” Chemnitz (Deutschland), 2023. ieee: V. Schöppner, K. Gevers, M. Albrecht, and A. Seefried, “Mischmaterialschweißen von PC/ABS und PMMA beim Warmgasstumpfschweißen mit Runddüsen,” presented at the 28. Technomer, Chemnitz (Deutschland), 2023. mla: Schöppner, Volker, et al. Mischmaterialschweißen von PC/ABS und PMMA beim Warmgasstumpfschweißen mit Runddüsen. 2023. short: 'V. Schöppner, K. Gevers, M. Albrecht, A. Seefried, in: Chemnitz (Deutschland), 2023.' conference: location: Chemnitz (Deutschland) name: 28. Technomer date_created: 2023-11-09T13:13:35Z date_updated: 2023-11-09T13:13:40Z department: - _id: '9' - _id: '367' - _id: '321' language: - iso: ger place: Chemnitz (Deutschland) status: public title: Mischmaterialschweißen von PC/ABS und PMMA beim Warmgasstumpfschweißen mit Runddüsen type: conference user_id: '44116' year: '2023' ... --- _id: '48744' author: - first_name: J. full_name: Petzke, J. last_name: Petzke - first_name: Dennis full_name: Kleinschmidt, Dennis id: '40516' last_name: Kleinschmidt - first_name: Volker full_name: Schöppner, Volker id: '20530' last_name: Schöppner citation: ama: 'Petzke J, Kleinschmidt D, Schöppner V. Microwave Heating of Rubber Extrudates. In: ; 2023.' apa: Petzke, J., Kleinschmidt, D., & Schöppner, V. (2023). Microwave Heating of Rubber Extrudates. 38th International Conference of the Polymer Processing Society, St. Gallen (Schweiz). bibtex: '@inproceedings{Petzke_Kleinschmidt_Schöppner_2023, place={St. Gallen (Schweiz)}, title={Microwave Heating of Rubber Extrudates}, author={Petzke, J. and Kleinschmidt, Dennis and Schöppner, Volker}, year={2023} }' chicago: Petzke, J., Dennis Kleinschmidt, and Volker Schöppner. “Microwave Heating of Rubber Extrudates.” St. Gallen (Schweiz), 2023. ieee: J. Petzke, D. Kleinschmidt, and V. Schöppner, “Microwave Heating of Rubber Extrudates,” presented at the 38th International Conference of the Polymer Processing Society, St. Gallen (Schweiz), 2023. mla: Petzke, J., et al. Microwave Heating of Rubber Extrudates. 2023. short: 'J. Petzke, D. Kleinschmidt, V. Schöppner, in: St. Gallen (Schweiz), 2023.' conference: location: St. Gallen (Schweiz) name: 38th International Conference of the Polymer Processing Society date_created: 2023-11-09T13:10:58Z date_updated: 2023-11-09T13:11:01Z department: - _id: '9' - _id: '367' - _id: '321' language: - iso: eng place: St. Gallen (Schweiz) status: public title: Microwave Heating of Rubber Extrudates type: conference user_id: '44116' year: '2023' ... --- _id: '48741' author: - first_name: Elmar full_name: Moritzer, Elmar id: '20531' last_name: Moritzer - first_name: Stephan full_name: Kartelmeyer, Stephan last_name: Kartelmeyer - first_name: Roberg full_name: Kringe, Roberg last_name: Kringe - first_name: Christoph full_name: Jaroschek, Christoph last_name: Jaroschek citation: ama: Moritzer E, Kartelmeyer S, Kringe R, Jaroschek C. Konturnah kühlen für wenig Geld. Kunststoffe. 2023;(8/2023):56-59. apa: Moritzer, E., Kartelmeyer, S., Kringe, R., & Jaroschek, C. (2023). Konturnah kühlen für wenig Geld. Kunststoffe, 8/2023, 56–59. bibtex: '@article{Moritzer_Kartelmeyer_Kringe_Jaroschek_2023, title={Konturnah kühlen für wenig Geld}, number={8/2023}, journal={Kunststoffe}, author={Moritzer, Elmar and Kartelmeyer, Stephan and Kringe, Roberg and Jaroschek, Christoph}, year={2023}, pages={56–59} }' chicago: 'Moritzer, Elmar, Stephan Kartelmeyer, Roberg Kringe, and Christoph Jaroschek. “Konturnah kühlen für wenig Geld.” Kunststoffe, no. 8/2023 (2023): 56–59.' ieee: E. Moritzer, S. Kartelmeyer, R. Kringe, and C. Jaroschek, “Konturnah kühlen für wenig Geld,” Kunststoffe, no. 8/2023, pp. 56–59, 2023. mla: Moritzer, Elmar, et al. “Konturnah kühlen für wenig Geld.” Kunststoffe, no. 8/2023, 2023, pp. 56–59. short: E. Moritzer, S. Kartelmeyer, R. Kringe, C. Jaroschek, Kunststoffe (2023) 56–59. date_created: 2023-11-09T13:04:54Z date_updated: 2023-11-09T13:04:57Z department: - _id: '9' - _id: '367' - _id: '321' issue: 8/2023 language: - iso: ger page: 56-59 publication: Kunststoffe status: public title: Konturnah kühlen für wenig Geld type: journal_article user_id: '44116' year: '2023' ... --- _id: '48759' author: - first_name: Julia full_name: Diederich, Julia id: '13796' last_name: Diederich citation: ama: Diederich J. Wie war das damals? Oral history und Zeitzeug:innenbefragung. (Über-)Leben im Nationalsozialismus. 2023;(99):7-9. apa: Diederich, J. (2023). Wie war das damals? Oral history und Zeitzeug:innenbefragung. (Über-)Leben im Nationalsozialismus, 99, 7–9. bibtex: '@article{Diederich_2023, title={Wie war das damals? Oral history und Zeitzeug:innenbefragung}, number={99}, journal={(Über-)Leben im Nationalsozialismus}, publisher={Grundschule Sachunterricht}, author={Diederich, Julia}, year={2023}, pages={7–9} }' chicago: 'Diederich, Julia. “Wie war das damals? Oral history und Zeitzeug:innenbefragung.” (Über-)Leben im Nationalsozialismus, no. 99 (2023): 7–9.' ieee: J. Diederich, “Wie war das damals? Oral history und Zeitzeug:innenbefragung,” (Über-)Leben im Nationalsozialismus, no. 99, pp. 7–9, 2023. mla: Diederich, Julia. “Wie war das damals? Oral history und Zeitzeug:innenbefragung.” (Über-)Leben im Nationalsozialismus, no. 99, Grundschule Sachunterricht, 2023, pp. 7–9. short: J. Diederich, (Über-)Leben im Nationalsozialismus (2023) 7–9. date_created: 2023-11-10T08:40:16Z date_updated: 2023-11-10T10:55:55Z issue: '99' language: - iso: ger page: 7-9 publication: (Über-)Leben im Nationalsozialismus publication_status: published publisher: Grundschule Sachunterricht related_material: link: - relation: confirmation url: https://www.friedrich-verlag.de/friedrich-plus/grundschule/sachunterricht/zeit-und-geschichte/wie-war-das-damals-15771 status: public title: Wie war das damals? Oral history und Zeitzeug:innenbefragung type: journal_article user_id: '13796' year: '2023' ... --- _id: '48777' abstract: - lang: eng text: AbstractExplainable artificial intelligence has mainly focused on static learning scenarios so far. We are interested in dynamic scenarios where data is sampled progressively, and learning is done in an incremental rather than a batch mode. We seek efficient incremental algorithms for computing feature importance (FI). Permutation feature importance (PFI) is a well-established model-agnostic measure to obtain global FI based on feature marginalization of absent features. We propose an efficient, model-agnostic algorithm called iPFI to estimate this measure incrementally and under dynamic modeling conditions including concept drift. We prove theoretical guarantees on the approximation quality in terms of expectation and variance. To validate our theoretical findings and the efficacy of our approaches in incremental scenarios dealing with streaming data rather than traditional batch settings, we conduct multiple experimental studies on benchmark data with and without concept drift. author: - first_name: Fabian full_name: Fumagalli, Fabian last_name: Fumagalli - first_name: Maximilian full_name: Muschalik, Maximilian last_name: Muschalik - first_name: Eyke full_name: Hüllermeier, Eyke last_name: Hüllermeier - first_name: Barbara full_name: Hammer, Barbara last_name: Hammer citation: ama: 'Fumagalli F, Muschalik M, Hüllermeier E, Hammer B. Incremental permutation feature importance (iPFI): towards online explanations on data streams. Machine Learning. Published online 2023. doi:10.1007/s10994-023-06385-y' apa: 'Fumagalli, F., Muschalik, M., Hüllermeier, E., & Hammer, B. (2023). Incremental permutation feature importance (iPFI): towards online explanations on data streams. Machine Learning. https://doi.org/10.1007/s10994-023-06385-y' bibtex: '@article{Fumagalli_Muschalik_Hüllermeier_Hammer_2023, title={Incremental permutation feature importance (iPFI): towards online explanations on data streams}, DOI={10.1007/s10994-023-06385-y}, journal={Machine Learning}, publisher={Springer Science and Business Media LLC}, author={Fumagalli, Fabian and Muschalik, Maximilian and Hüllermeier, Eyke and Hammer, Barbara}, year={2023} }' chicago: 'Fumagalli, Fabian, Maximilian Muschalik, Eyke Hüllermeier, and Barbara Hammer. “Incremental Permutation Feature Importance (IPFI): Towards Online Explanations on Data Streams.” Machine Learning, 2023. https://doi.org/10.1007/s10994-023-06385-y.' ieee: 'F. Fumagalli, M. Muschalik, E. Hüllermeier, and B. Hammer, “Incremental permutation feature importance (iPFI): towards online explanations on data streams,” Machine Learning, 2023, doi: 10.1007/s10994-023-06385-y.' mla: 'Fumagalli, Fabian, et al. “Incremental Permutation Feature Importance (IPFI): Towards Online Explanations on Data Streams.” Machine Learning, Springer Science and Business Media LLC, 2023, doi:10.1007/s10994-023-06385-y.' short: F. Fumagalli, M. Muschalik, E. Hüllermeier, B. Hammer, Machine Learning (2023). date_created: 2023-11-10T14:15:36Z date_updated: 2023-11-10T14:24:27Z department: - _id: '424' - _id: '660' doi: 10.1007/s10994-023-06385-y keyword: - Artificial Intelligence - Software language: - iso: eng publication: Machine Learning publication_identifier: issn: - 0885-6125 - 1573-0565 publication_status: published publisher: Springer Science and Business Media LLC status: public title: 'Incremental permutation feature importance (iPFI): towards online explanations on data streams' type: journal_article user_id: '55908' year: '2023' ... --- _id: '48774' author: - first_name: Ying full_name: Gao, Ying last_name: Gao - first_name: Xuekai full_name: Ma, Xuekai id: '59416' last_name: Ma - first_name: Xiaokun full_name: Zhai, Xiaokun last_name: Zhai - first_name: Chunzi full_name: Xing, Chunzi last_name: Xing - first_name: Meini full_name: Gao, Meini last_name: Gao - first_name: Haitao full_name: Dai, Haitao last_name: Dai - first_name: Hao full_name: Wu, Hao last_name: Wu - first_name: Tong full_name: Liu, Tong last_name: Liu - first_name: Yuan full_name: Ren, Yuan last_name: Ren - first_name: Xiao full_name: Wang, Xiao last_name: Wang - first_name: Anlian full_name: Pan, Anlian last_name: Pan - first_name: Wei full_name: Hu, Wei last_name: Hu - first_name: Stefan full_name: Schumacher, Stefan last_name: Schumacher - first_name: Tingge full_name: Gao, Tingge last_name: Gao citation: ama: Gao Y, Ma X, Zhai X, et al. Single-shot spatial instability and electric control of polariton condensates at room temperature. Physical Review B. 2023;108(20):205303. doi:10.1103/physrevb.108.205303 apa: Gao, Y., Ma, X., Zhai, X., Xing, C., Gao, M., Dai, H., Wu, H., Liu, T., Ren, Y., Wang, X., Pan, A., Hu, W., Schumacher, S., & Gao, T. (2023). Single-shot spatial instability and electric control of polariton condensates at room temperature. Physical Review B, 108(20), 205303. https://doi.org/10.1103/physrevb.108.205303 bibtex: '@article{Gao_Ma_Zhai_Xing_Gao_Dai_Wu_Liu_Ren_Wang_et al._2023, title={Single-shot spatial instability and electric control of polariton condensates at room temperature}, volume={108}, DOI={10.1103/physrevb.108.205303}, number={20}, journal={Physical Review B}, publisher={American Physical Society (APS)}, author={Gao, Ying and Ma, Xuekai and Zhai, Xiaokun and Xing, Chunzi and Gao, Meini and Dai, Haitao and Wu, Hao and Liu, Tong and Ren, Yuan and Wang, Xiao and et al.}, year={2023}, pages={205303} }' chicago: 'Gao, Ying, Xuekai Ma, Xiaokun Zhai, Chunzi Xing, Meini Gao, Haitao Dai, Hao Wu, et al. “Single-Shot Spatial Instability and Electric Control of Polariton Condensates at Room Temperature.” Physical Review B 108, no. 20 (2023): 205303. https://doi.org/10.1103/physrevb.108.205303.' ieee: 'Y. Gao et al., “Single-shot spatial instability and electric control of polariton condensates at room temperature,” Physical Review B, vol. 108, no. 20, p. 205303, 2023, doi: 10.1103/physrevb.108.205303.' mla: Gao, Ying, et al. “Single-Shot Spatial Instability and Electric Control of Polariton Condensates at Room Temperature.” Physical Review B, vol. 108, no. 20, American Physical Society (APS), 2023, p. 205303, doi:10.1103/physrevb.108.205303. short: Y. Gao, X. Ma, X. Zhai, C. Xing, M. Gao, H. Dai, H. Wu, T. Liu, Y. Ren, X. Wang, A. Pan, W. Hu, S. Schumacher, T. Gao, Physical Review B 108 (2023) 205303. date_created: 2023-11-10T11:17:57Z date_updated: 2023-11-10T11:23:12Z department: - _id: '15' doi: 10.1103/physrevb.108.205303 intvolume: ' 108' issue: '20' language: - iso: eng page: '205303' publication: Physical Review B publication_identifier: issn: - 2469-9950 - 2469-9969 publication_status: published publisher: American Physical Society (APS) status: public title: Single-shot spatial instability and electric control of polariton condensates at room temperature type: journal_article user_id: '59416' volume: 108 year: '2023' ... --- _id: '48639' abstract: - lang: eng text: The seven parallel dissociative ionization channels of benzonitrile yield highly stable fragment ions with commensurate abundance, underlining the potential role of the benzonitrile cation as hub species in the interstellar medium. article_type: original author: - first_name: Jerry full_name: Kamer, Jerry last_name: Kamer - first_name: Domenik full_name: Schleier, Domenik id: '98339' last_name: Schleier - first_name: Merel full_name: Donker, Merel last_name: Donker - first_name: Patrick full_name: Hemberger, Patrick last_name: Hemberger - first_name: Andras full_name: Bodi, Andras last_name: Bodi - first_name: Jordy full_name: Bouwman, Jordy last_name: Bouwman citation: ama: Kamer J, Schleier D, Donker M, Hemberger P, Bodi A, Bouwman J. Threshold photoelectron spectroscopy and dissociative photoionization of benzonitrile. Physical Chemistry Chemical Physics. 2023;25(42):29070-29079. doi:10.1039/d3cp03977c apa: Kamer, J., Schleier, D., Donker, M., Hemberger, P., Bodi, A., & Bouwman, J. (2023). Threshold photoelectron spectroscopy and dissociative photoionization of benzonitrile. Physical Chemistry Chemical Physics, 25(42), 29070–29079. https://doi.org/10.1039/d3cp03977c bibtex: '@article{Kamer_Schleier_Donker_Hemberger_Bodi_Bouwman_2023, title={Threshold photoelectron spectroscopy and dissociative photoionization of benzonitrile}, volume={25}, DOI={10.1039/d3cp03977c}, number={42}, journal={Physical Chemistry Chemical Physics}, publisher={Royal Society of Chemistry (RSC)}, author={Kamer, Jerry and Schleier, Domenik and Donker, Merel and Hemberger, Patrick and Bodi, Andras and Bouwman, Jordy}, year={2023}, pages={29070–29079} }' chicago: 'Kamer, Jerry, Domenik Schleier, Merel Donker, Patrick Hemberger, Andras Bodi, and Jordy Bouwman. “Threshold Photoelectron Spectroscopy and Dissociative Photoionization of Benzonitrile.” Physical Chemistry Chemical Physics 25, no. 42 (2023): 29070–79. https://doi.org/10.1039/d3cp03977c.' ieee: 'J. Kamer, D. Schleier, M. Donker, P. Hemberger, A. Bodi, and J. Bouwman, “Threshold photoelectron spectroscopy and dissociative photoionization of benzonitrile,” Physical Chemistry Chemical Physics, vol. 25, no. 42, pp. 29070–29079, 2023, doi: 10.1039/d3cp03977c.' mla: Kamer, Jerry, et al. “Threshold Photoelectron Spectroscopy and Dissociative Photoionization of Benzonitrile.” Physical Chemistry Chemical Physics, vol. 25, no. 42, Royal Society of Chemistry (RSC), 2023, pp. 29070–79, doi:10.1039/d3cp03977c. short: J. Kamer, D. Schleier, M. Donker, P. Hemberger, A. Bodi, J. Bouwman, Physical Chemistry Chemical Physics 25 (2023) 29070–29079. date_created: 2023-11-07T07:24:53Z date_updated: 2023-11-13T08:00:52Z department: - _id: '728' doi: 10.1039/d3cp03977c intvolume: ' 25' issue: '42' keyword: - Physical and Theoretical Chemistry - General Physics and Astronomy language: - iso: eng page: 29070-29079 publication: Physical Chemistry Chemical Physics publication_identifier: issn: - 1463-9076 - 1463-9084 publication_status: published publisher: Royal Society of Chemistry (RSC) quality_controlled: '1' status: public title: Threshold photoelectron spectroscopy and dissociative photoionization of benzonitrile type: journal_article user_id: '98339' volume: 25 year: '2023' ... --- _id: '48900' author: - first_name: Sarah full_name: Diederich, Sarah last_name: Diederich - first_name: Anja full_name: Iseke, Anja last_name: Iseke - first_name: Kerstin full_name: Pull, Kerstin last_name: Pull - first_name: Martin full_name: Schneider, Martin last_name: Schneider citation: ama: 'Diederich S, Iseke A, Pull K, Schneider M. Role (in-)congruity and the Catch 22 for female executives: how stereotyping contributes to the gender pay gap at top executive level. The International Journal of Human Resource Management. Published online 2023:1-29. doi:10.1080/09585192.2023.2273331' apa: 'Diederich, S., Iseke, A., Pull, K., & Schneider, M. (2023). Role (in-)congruity and the Catch 22 for female executives: how stereotyping contributes to the gender pay gap at top executive level. The International Journal of Human Resource Management, 1–29. https://doi.org/10.1080/09585192.2023.2273331' bibtex: '@article{Diederich_Iseke_Pull_Schneider_2023, title={Role (in-)congruity and the Catch 22 for female executives: how stereotyping contributes to the gender pay gap at top executive level}, DOI={10.1080/09585192.2023.2273331}, journal={The International Journal of Human Resource Management}, publisher={Informa UK Limited}, author={Diederich, Sarah and Iseke, Anja and Pull, Kerstin and Schneider, Martin}, year={2023}, pages={1–29} }' chicago: 'Diederich, Sarah, Anja Iseke, Kerstin Pull, and Martin Schneider. “Role (in-)Congruity and the Catch 22 for Female Executives: How Stereotyping Contributes to the Gender Pay Gap at Top Executive Level.” The International Journal of Human Resource Management, 2023, 1–29. https://doi.org/10.1080/09585192.2023.2273331.' ieee: 'S. Diederich, A. Iseke, K. Pull, and M. Schneider, “Role (in-)congruity and the Catch 22 for female executives: how stereotyping contributes to the gender pay gap at top executive level,” The International Journal of Human Resource Management, pp. 1–29, 2023, doi: 10.1080/09585192.2023.2273331.' mla: 'Diederich, Sarah, et al. “Role (in-)Congruity and the Catch 22 for Female Executives: How Stereotyping Contributes to the Gender Pay Gap at Top Executive Level.” The International Journal of Human Resource Management, Informa UK Limited, 2023, pp. 1–29, doi:10.1080/09585192.2023.2273331.' short: S. Diederich, A. Iseke, K. Pull, M. Schneider, The International Journal of Human Resource Management (2023) 1–29. date_created: 2023-11-14T16:13:46Z date_updated: 2023-11-14T16:13:52Z doi: 10.1080/09585192.2023.2273331 keyword: - Management of Technology and Innovation - Organizational Behavior and Human Resource Management - Strategy and Management - Business and International Management - Industrial relations language: - iso: eng page: 1-29 publication: The International Journal of Human Resource Management publication_identifier: issn: - 0958-5192 - 1466-4399 publication_status: published publisher: Informa UK Limited status: public title: 'Role (in-)congruity and the Catch 22 for female executives: how stereotyping contributes to the gender pay gap at top executive level' type: journal_article user_id: '471' year: '2023' ... --- _id: '48833' abstract: - lang: eng text:

Mittels Fallstudien zweier Projekte des bundesweiten Programms InnoVET (Zukunft gestalten – Innovationen für eine exzellente berufliche Bildung) wird untersucht, wie innovative Aufstiegsfortbildungen auf der DQR-Stufe 5 zu einer durchlässigeren Berufsbildung im Verbund gestaltet und Ergebnisse transferiert werden. Zwecks nachhaltiger Implementation am Markt wird der Bedarf eines Marketings deutlich.

author: - first_name: Nina-Madeleine full_name: Peitz, Nina-Madeleine id: '10001' last_name: Peitz - first_name: Max full_name: Müller-Wegner, Max last_name: Müller-Wegner - first_name: Hubert full_name: Ertl, Hubert last_name: Ertl citation: ama: Peitz N-M, Müller-Wegner M, Ertl H. Warum es ein Marketing für die Berufsbildung braucht – Zwei Fallstudien über die Verbesserung der Durchlässigkeit durch innovative Fortbildungen auf der DQR-Stufe 5. Published online 2023. apa: Peitz, N.-M., Müller-Wegner, M., & Ertl, H. (2023). Warum es ein Marketing für die Berufsbildung braucht – Zwei Fallstudien über die Verbesserung der Durchlässigkeit durch innovative Fortbildungen auf der DQR-Stufe 5. Center for Open Science. bibtex: '@article{Peitz_Müller-Wegner_Ertl_2023, title={Warum es ein Marketing für die Berufsbildung braucht – Zwei Fallstudien über die Verbesserung der Durchlässigkeit durch innovative Fortbildungen auf der DQR-Stufe 5}, publisher={Center for Open Science}, author={Peitz, Nina-Madeleine and Müller-Wegner, Max and Ertl, Hubert}, year={2023} }' chicago: Peitz, Nina-Madeleine, Max Müller-Wegner, and Hubert Ertl. “Warum Es Ein Marketing Für Die Berufsbildung Braucht – Zwei Fallstudien Über Die Verbesserung Der Durchlässigkeit Durch Innovative Fortbildungen Auf Der DQR-Stufe 5.” Center for Open Science, 2023. ieee: N.-M. Peitz, M. Müller-Wegner, and H. Ertl, “Warum es ein Marketing für die Berufsbildung braucht – Zwei Fallstudien über die Verbesserung der Durchlässigkeit durch innovative Fortbildungen auf der DQR-Stufe 5.” Center for Open Science, 2023. mla: Peitz, Nina-Madeleine, et al. Warum Es Ein Marketing Für Die Berufsbildung Braucht – Zwei Fallstudien Über Die Verbesserung Der Durchlässigkeit Durch Innovative Fortbildungen Auf Der DQR-Stufe 5. Center for Open Science, 2023. short: N.-M. Peitz, M. Müller-Wegner, H. Ertl, (2023). date_created: 2023-11-14T13:44:24Z date_updated: 2023-11-14T17:40:14Z language: - iso: eng publication_status: published publisher: Center for Open Science status: public title: Warum es ein Marketing für die Berufsbildung braucht – Zwei Fallstudien über die Verbesserung der Durchlässigkeit durch innovative Fortbildungen auf der DQR-Stufe 5 type: preprint user_id: '10001' year: '2023' ... --- _id: '35602' abstract: - lang: eng text: "Continuous Speech Separation (CSS) has been proposed to address speech overlaps during the analysis of realistic meeting-like conversations by eliminating any overlaps before further processing.\r\nCSS separates a recording of arbitrarily many speakers into a small number of overlap-free output channels, where each output channel may contain speech of multiple speakers.\r\nThis is often done by applying a conventional separation model trained with Utterance-level Permutation Invariant Training (uPIT), which exclusively maps a speaker to an output channel, in sliding window approach called stitching.\r\nRecently, we introduced an alternative training scheme called Graph-PIT that teaches the separation network to directly produce output streams in the required format without stitching.\r\nIt can handle an arbitrary number of speakers as long as never more of them overlap at the same time than the separator has output channels.\r\nIn this contribution, we further investigate the Graph-PIT training scheme.\r\nWe show in extended experiments that models trained with Graph-PIT also work in challenging reverberant conditions.\r\nModels trained in this way are able to perform segment-less CSS, i.e., without stitching, and achieve comparable and often better separation quality than the conventional CSS with uPIT and stitching.\r\nWe simplify the training schedule for Graph-PIT with the recently proposed Source Aggregated Signal-to-Distortion Ratio (SA-SDR) loss.\r\nIt eliminates unfavorable properties of the previously used A-SDR loss and thus enables training with Graph-PIT from scratch.\r\nGraph-PIT training relaxes the constraints w.r.t. the allowed numbers of speakers and speaking patterns which allows using a larger variety of training data.\r\nFurthermore, we introduce novel signal-level evaluation metrics for meeting scenarios, namely the source-aggregated scale- and convolution-invariant Signal-to-Distortion Ratio (SA-SI-SDR and SA-CI-SDR), which are generalizations of the commonly used SDR-based metrics for the CSS case." article_type: original author: - first_name: Thilo full_name: von Neumann, Thilo id: '49870' last_name: von Neumann orcid: https://orcid.org/0000-0002-7717-8670 - first_name: Keisuke full_name: Kinoshita, Keisuke last_name: Kinoshita - first_name: Christoph full_name: Boeddeker, Christoph id: '40767' last_name: Boeddeker - first_name: Marc full_name: Delcroix, Marc last_name: Delcroix - first_name: Reinhold full_name: Haeb-Umbach, Reinhold id: '242' last_name: Haeb-Umbach citation: ama: 'von Neumann T, Kinoshita K, Boeddeker C, Delcroix M, Haeb-Umbach R. Segment-Less Continuous Speech Separation of Meetings: Training and Evaluation Criteria. IEEE/ACM Transactions on Audio, Speech, and Language Processing. 2023;31:576-589. doi:10.1109/taslp.2022.3228629' apa: 'von Neumann, T., Kinoshita, K., Boeddeker, C., Delcroix, M., & Haeb-Umbach, R. (2023). Segment-Less Continuous Speech Separation of Meetings: Training and Evaluation Criteria. IEEE/ACM Transactions on Audio, Speech, and Language Processing, 31, 576–589. https://doi.org/10.1109/taslp.2022.3228629' bibtex: '@article{von Neumann_Kinoshita_Boeddeker_Delcroix_Haeb-Umbach_2023, title={Segment-Less Continuous Speech Separation of Meetings: Training and Evaluation Criteria}, volume={31}, DOI={10.1109/taslp.2022.3228629}, journal={IEEE/ACM Transactions on Audio, Speech, and Language Processing}, publisher={Institute of Electrical and Electronics Engineers (IEEE)}, author={von Neumann, Thilo and Kinoshita, Keisuke and Boeddeker, Christoph and Delcroix, Marc and Haeb-Umbach, Reinhold}, year={2023}, pages={576–589} }' chicago: 'Neumann, Thilo von, Keisuke Kinoshita, Christoph Boeddeker, Marc Delcroix, and Reinhold Haeb-Umbach. “Segment-Less Continuous Speech Separation of Meetings: Training and Evaluation Criteria.” IEEE/ACM Transactions on Audio, Speech, and Language Processing 31 (2023): 576–89. https://doi.org/10.1109/taslp.2022.3228629.' ieee: 'T. von Neumann, K. Kinoshita, C. Boeddeker, M. Delcroix, and R. Haeb-Umbach, “Segment-Less Continuous Speech Separation of Meetings: Training and Evaluation Criteria,” IEEE/ACM Transactions on Audio, Speech, and Language Processing, vol. 31, pp. 576–589, 2023, doi: 10.1109/taslp.2022.3228629.' mla: 'von Neumann, Thilo, et al. “Segment-Less Continuous Speech Separation of Meetings: Training and Evaluation Criteria.” IEEE/ACM Transactions on Audio, Speech, and Language Processing, vol. 31, Institute of Electrical and Electronics Engineers (IEEE), 2023, pp. 576–89, doi:10.1109/taslp.2022.3228629.' short: T. von Neumann, K. Kinoshita, C. Boeddeker, M. Delcroix, R. Haeb-Umbach, IEEE/ACM Transactions on Audio, Speech, and Language Processing 31 (2023) 576–589. date_created: 2023-01-09T17:24:17Z date_updated: 2023-11-15T12:16:11Z ddc: - '000' department: - _id: '54' doi: 10.1109/taslp.2022.3228629 file: - access_level: open_access content_type: application/pdf creator: haebumb date_created: 2023-01-09T17:46:05Z date_updated: 2023-01-11T08:50:19Z file_id: '35607' file_name: main.pdf file_size: 7185077 relation: main_file file_date_updated: 2023-01-11T08:50:19Z has_accepted_license: '1' intvolume: ' 31' keyword: - Continuous Speech Separation - Source Separation - Graph-PIT - Dynamic Programming - Permutation Invariant Training language: - iso: eng oa: '1' page: 576-589 project: - _id: '52' name: 'PC2: Computing Resources Provided by the Paderborn Center for Parallel Computing' publication: IEEE/ACM Transactions on Audio, Speech, and Language Processing publication_identifier: issn: - 2329-9290 - 2329-9304 publication_status: published publisher: Institute of Electrical and Electronics Engineers (IEEE) quality_controlled: '1' status: public title: 'Segment-Less Continuous Speech Separation of Meetings: Training and Evaluation Criteria' type: journal_article user_id: '49870' volume: 31 year: '2023' ... --- _id: '48928' author: - first_name: Hubert full_name: Ertl, Hubert last_name: Ertl - first_name: Nina-Madeleine full_name: Peitz, Nina-Madeleine id: '10001' last_name: Peitz citation: ama: 'Ertl H, Peitz N-M. Schnittstelle zwischen Programmen und Forschung – Die Forschungsbegleitung InnoVET. In: Datenreport Zum Berufsbildungsbericht 2023. Informationen Und Analysen Zur Entwicklung Der Beruflichen Bildung. Bundesinstitut für Berufsbildung; 2023:382-385.' apa: Ertl, H., & Peitz, N.-M. (2023). Schnittstelle zwischen Programmen und Forschung – Die Forschungsbegleitung InnoVET. In Datenreport zum Berufsbildungsbericht 2023. Informationen und Analysen zur Entwicklung der beruflichen Bildung (pp. 382–385). Bundesinstitut für Berufsbildung. bibtex: '@inbook{Ertl_Peitz_2023, place={Bonn}, title={Schnittstelle zwischen Programmen und Forschung – Die Forschungsbegleitung InnoVET}, booktitle={Datenreport zum Berufsbildungsbericht 2023. Informationen und Analysen zur Entwicklung der beruflichen Bildung}, publisher={Bundesinstitut für Berufsbildung}, author={Ertl, Hubert and Peitz, Nina-Madeleine}, year={2023}, pages={382–385} }' chicago: 'Ertl, Hubert, and Nina-Madeleine Peitz. “Schnittstelle Zwischen Programmen Und Forschung – Die Forschungsbegleitung InnoVET.” In Datenreport Zum Berufsbildungsbericht 2023. Informationen Und Analysen Zur Entwicklung Der Beruflichen Bildung, 382–85. Bonn: Bundesinstitut für Berufsbildung, 2023.' ieee: 'H. Ertl and N.-M. Peitz, “Schnittstelle zwischen Programmen und Forschung – Die Forschungsbegleitung InnoVET,” in Datenreport zum Berufsbildungsbericht 2023. Informationen und Analysen zur Entwicklung der beruflichen Bildung, Bonn: Bundesinstitut für Berufsbildung, 2023, pp. 382–385.' mla: Ertl, Hubert, and Nina-Madeleine Peitz. “Schnittstelle Zwischen Programmen Und Forschung – Die Forschungsbegleitung InnoVET.” Datenreport Zum Berufsbildungsbericht 2023. Informationen Und Analysen Zur Entwicklung Der Beruflichen Bildung, Bundesinstitut für Berufsbildung, 2023, pp. 382–85. short: 'H. Ertl, N.-M. Peitz, in: Datenreport Zum Berufsbildungsbericht 2023. Informationen Und Analysen Zur Entwicklung Der Beruflichen Bildung, Bundesinstitut für Berufsbildung, Bonn, 2023, pp. 382–385.' date_created: 2023-11-15T12:26:28Z date_updated: 2023-11-15T12:28:06Z extern: '1' language: - iso: eng main_file_link: - open_access: '1' url: https://www.bibb.de/datenreport/de/175452.php oa: '1' page: 382-385 place: Bonn publication: Datenreport zum Berufsbildungsbericht 2023. Informationen und Analysen zur Entwicklung der beruflichen Bildung publisher: Bundesinstitut für Berufsbildung status: public title: Schnittstelle zwischen Programmen und Forschung – Die Forschungsbegleitung InnoVET type: book_chapter user_id: '10001' year: '2023' ...