---
_id: '44094'
author:
- first_name: Thomas
full_name: Ehlert, Thomas
id: '47151'
last_name: Ehlert
- first_name: Tural
full_name: Mamedov, Tural
last_name: Mamedov
- first_name: Markus
full_name: Schubert, Markus
last_name: Schubert
- first_name: Eugeny Y.
full_name: Kenig, Eugeny Y.
id: '665'
last_name: Kenig
citation:
ama: 'Ehlert T, Mamedov T, Schubert M, Kenig EY. Charakterisierung des Einflusses
neigungsinduzierter Strömungsformen mit dem Ansatz der hydrodynamsichen Analogie.
In: ; 2023.'
apa: Ehlert, T., Mamedov, T., Schubert, M., & Kenig, E. Y. (2023). Charakterisierung
des Einflusses neigungsinduzierter Strömungsformen mit dem Ansatz der hydrodynamsichen
Analogie. Jahrestreffen der ProcessNet-Fachgruppen Fluidverfahrenstechnik
und Adsoprtion, Frankfurt am Main.
bibtex: '@inproceedings{Ehlert_Mamedov_Schubert_Kenig_2023, title={Charakterisierung
des Einflusses neigungsinduzierter Strömungsformen mit dem Ansatz der hydrodynamsichen
Analogie}, author={Ehlert, Thomas and Mamedov, Tural and Schubert, Markus and
Kenig, Eugeny Y.}, year={2023} }'
chicago: Ehlert, Thomas, Tural Mamedov, Markus Schubert, and Eugeny Y. Kenig. “Charakterisierung
Des Einflusses Neigungsinduzierter Strömungsformen Mit Dem Ansatz Der Hydrodynamsichen
Analogie,” 2023.
ieee: T. Ehlert, T. Mamedov, M. Schubert, and E. Y. Kenig, “Charakterisierung des
Einflusses neigungsinduzierter Strömungsformen mit dem Ansatz der hydrodynamsichen
Analogie,” presented at the Jahrestreffen der ProcessNet-Fachgruppen Fluidverfahrenstechnik
und Adsoprtion, Frankfurt am Main, 2023.
mla: Ehlert, Thomas, et al. Charakterisierung Des Einflusses Neigungsinduzierter
Strömungsformen Mit Dem Ansatz Der Hydrodynamsichen Analogie. 2023.
short: 'T. Ehlert, T. Mamedov, M. Schubert, E.Y. Kenig, in: 2023.'
conference:
end_date: 2023-03-23
location: Frankfurt am Main
name: Jahrestreffen der ProcessNet-Fachgruppen Fluidverfahrenstechnik und Adsoprtion
start_date: 2023-03-21
date_created: 2023-04-21T06:28:02Z
date_updated: 2023-04-21T06:32:26Z
department:
- _id: '9'
- _id: '145'
language:
- iso: eng
status: public
title: Charakterisierung des Einflusses neigungsinduzierter Strömungsformen mit dem
Ansatz der hydrodynamsichen Analogie
type: conference_abstract
user_id: '47151'
year: '2023'
...
---
_id: '44095'
author:
- first_name: Thomas
full_name: Ehlert, Thomas
id: '47151'
last_name: Ehlert
- first_name: Nicole
full_name: Lutters, Nicole
id: '22006'
last_name: Lutters
- first_name: Eugeny Y.
full_name: Kenig, Eugeny Y.
id: '665'
last_name: Kenig
citation:
ama: 'Ehlert T, Lutters N, Kenig EY. Modellierung des Randspalts in Strukturpackungskolonnen
mit dem Ansatz der hydrodynamischen Analogien. In: ; 2023.'
apa: Ehlert, T., Lutters, N., & Kenig, E. Y. (2023). Modellierung des Randspalts
in Strukturpackungskolonnen mit dem Ansatz der hydrodynamischen Analogien.
Jahrestreffen der ProcessNet-Fachgruppen Fluidverfahrenstechnik und Adsoprtion,
Frankfurt am Main.
bibtex: '@inproceedings{Ehlert_Lutters_Kenig_2023, title={Modellierung des Randspalts
in Strukturpackungskolonnen mit dem Ansatz der hydrodynamischen Analogien}, author={Ehlert,
Thomas and Lutters, Nicole and Kenig, Eugeny Y.}, year={2023} }'
chicago: Ehlert, Thomas, Nicole Lutters, and Eugeny Y. Kenig. “Modellierung Des
Randspalts in Strukturpackungskolonnen Mit Dem Ansatz Der Hydrodynamischen Analogien,”
2023.
ieee: T. Ehlert, N. Lutters, and E. Y. Kenig, “Modellierung des Randspalts in Strukturpackungskolonnen
mit dem Ansatz der hydrodynamischen Analogien,” presented at the Jahrestreffen
der ProcessNet-Fachgruppen Fluidverfahrenstechnik und Adsoprtion, Frankfurt am
Main, 2023.
mla: Ehlert, Thomas, et al. Modellierung Des Randspalts in Strukturpackungskolonnen
Mit Dem Ansatz Der Hydrodynamischen Analogien. 2023.
short: 'T. Ehlert, N. Lutters, E.Y. Kenig, in: 2023.'
conference:
end_date: 2023-03-23
location: Frankfurt am Main
name: Jahrestreffen der ProcessNet-Fachgruppen Fluidverfahrenstechnik und Adsoprtion
start_date: 2023-03-21
date_created: 2023-04-21T06:31:54Z
date_updated: 2023-04-21T06:32:35Z
department:
- _id: '9'
- _id: '145'
language:
- iso: eng
status: public
title: Modellierung des Randspalts in Strukturpackungskolonnen mit dem Ansatz der
hydrodynamischen Analogien
type: conference_abstract
user_id: '47151'
year: '2023'
...
---
_id: '44137'
author:
- first_name: Yvonne Kristin
full_name: Jende, Yvonne Kristin
id: '24615'
last_name: Jende
citation:
ama: 'Jende YK. “The Future of Canadian Studies: On Plowing a Lonely Furrow.” .
Zeitschrift für Kanada-Studien . 2023;43:126–127.'
apa: 'Jende, Y. K. (2023). “The Future of Canadian Studies: On Plowing a Lonely
Furrow.” . Zeitschrift Für Kanada-Studien , 43, 126–127.'
bibtex: '@article{Jende_2023, title={“The Future of Canadian Studies: On Plowing
a Lonely Furrow.” }, volume={43}, journal={Zeitschrift für Kanada-Studien }, publisher={Wissner
Verlag}, author={Jende, Yvonne Kristin}, year={2023}, pages={126–127} }'
chicago: 'Jende, Yvonne Kristin. “‘The Future of Canadian Studies: On Plowing a
Lonely Furrow.’ .” Zeitschrift Für Kanada-Studien 43 (2023): 126–127.'
ieee: 'Y. K. Jende, “‘The Future of Canadian Studies: On Plowing a Lonely Furrow.’
,” Zeitschrift für Kanada-Studien , vol. 43, pp. 126–127, 2023.'
mla: 'Jende, Yvonne Kristin. “‘The Future of Canadian Studies: On Plowing a Lonely
Furrow.’ .” Zeitschrift Für Kanada-Studien , vol. 43, Wissner Verlag, 2023,
pp. 126–127.'
short: Y.K. Jende, Zeitschrift Für Kanada-Studien 43 (2023) 126–127.
date_created: 2023-04-24T09:46:13Z
date_updated: 2023-04-24T09:53:30Z
intvolume: ' 43'
language:
- iso: eng
page: 126–127
publication: 'Zeitschrift für Kanada-Studien '
publication_identifier:
issn:
- 0944-7008
publication_status: published
publisher: Wissner Verlag
status: public
title: '"The Future of Canadian Studies: On Plowing a Lonely Furrow." '
type: journal_article
user_id: '24615'
volume: 43
year: '2023'
...
---
_id: '44083'
author:
- first_name: Anna Brigitte
full_name: Bauer, Anna Brigitte
id: '24755'
last_name: Bauer
orcid: 0000-0002-1742-3099
citation:
ama: Bauer AB. Experimentelle Kompetenz Physikstudierender. Entwicklung und erste
Erprobung eines performanzorientierten Kompetenzstrukturmodells unter Nutzung
qualitativer Methoden. Vol 352. Logos Verlag Berlin GmbH; 2023. doi:10.30819/5625
apa: Bauer, A. B. (2023). Experimentelle Kompetenz Physikstudierender. Entwicklung
und erste Erprobung eines performanzorientierten Kompetenzstrukturmodells unter
Nutzung qualitativer Methoden (Vol. 352). Logos Verlag Berlin GmbH. https://doi.org/10.30819/5625
bibtex: '@book{Bauer_2023, place={Berlin}, series={Studien zum Physik- und Chemielernen},
title={Experimentelle Kompetenz Physikstudierender. Entwicklung und erste Erprobung
eines performanzorientierten Kompetenzstrukturmodells unter Nutzung qualitativer
Methoden}, volume={352}, DOI={10.30819/5625},
publisher={Logos Verlag Berlin GmbH}, author={Bauer, Anna Brigitte}, year={2023},
collection={Studien zum Physik- und Chemielernen} }'
chicago: 'Bauer, Anna Brigitte. Experimentelle Kompetenz Physikstudierender.
Entwicklung und erste Erprobung eines performanzorientierten Kompetenzstrukturmodells
unter Nutzung qualitativer Methoden. Vol. 352. Studien zum Physik- und Chemielernen.
Berlin: Logos Verlag Berlin GmbH, 2023. https://doi.org/10.30819/5625.'
ieee: 'A. B. Bauer, Experimentelle Kompetenz Physikstudierender. Entwicklung
und erste Erprobung eines performanzorientierten Kompetenzstrukturmodells unter
Nutzung qualitativer Methoden, vol. 352. Berlin: Logos Verlag Berlin GmbH,
2023.'
mla: Bauer, Anna Brigitte. Experimentelle Kompetenz Physikstudierender. Entwicklung
und erste Erprobung eines performanzorientierten Kompetenzstrukturmodells unter
Nutzung qualitativer Methoden. Logos Verlag Berlin GmbH, 2023, doi:10.30819/5625.
short: A.B. Bauer, Experimentelle Kompetenz Physikstudierender. Entwicklung und
erste Erprobung eines performanzorientierten Kompetenzstrukturmodells unter Nutzung
qualitativer Methoden, Logos Verlag Berlin GmbH, Berlin, 2023.
date_created: 2023-04-20T12:47:01Z
date_updated: 2023-04-26T06:41:56Z
department:
- _id: '299'
- _id: '576'
- _id: '651'
doi: 10.30819/5625
intvolume: ' 352'
language:
- iso: ger
main_file_link:
- open_access: '1'
url: https://www.logos-verlag.de/cgi-bin/engbuchmid?isbn=5625&lng=deu&id=%3D
oa: '1'
place: Berlin
publication_identifier:
isbn:
- 978-3-8325-5625-9
publication_status: published
publisher: Logos Verlag Berlin GmbH
series_title: Studien zum Physik- und Chemielernen
status: public
title: Experimentelle Kompetenz Physikstudierender. Entwicklung und erste Erprobung
eines performanzorientierten Kompetenzstrukturmodells unter Nutzung qualitativer
Methoden
type: book
user_id: '24755'
volume: 352
year: '2023'
...
---
_id: '44181'
author:
- first_name: Felix
full_name: Beule, Felix
id: '66192'
last_name: Beule
- first_name: Lars
full_name: Schmelzle, Lars
last_name: Schmelzle
- first_name: Dominik
full_name: Teutenberg, Dominik
id: '537'
last_name: Teutenberg
- first_name: Gunnar
full_name: Possart, Gunnar
last_name: Possart
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Julia
full_name: Mergheim, Julia
last_name: Mergheim
citation:
ama: 'Beule F, Schmelzle L, Teutenberg D, Possart G, Meschut G, Mergheim J. Methodenentwicklung
zur Simulation von hyperelastischen Klebverbindungen unter Crashbelastung. In:
23. Kolloquium: Gemeinsame Forschung in Der Klebtechnik. 23. Kolloquium:
Gemeinsame Forschung in der Klebtechnik. ; 2023.'
apa: 'Beule, F., Schmelzle, L., Teutenberg, D., Possart, G., Meschut, G., &
Mergheim, J. (2023). Methodenentwicklung zur Simulation von hyperelastischen Klebverbindungen
unter Crashbelastung. 23. Kolloquium: Gemeinsame Forschung in Der Klebtechnik.
23. Kolloquium: Gemeinsame Forschung in der Klebtechnik, Frankfurt.'
bibtex: '@inproceedings{Beule_Schmelzle_Teutenberg_Possart_Meschut_Mergheim_2023,
place={Frankfurt}, series={23. Kolloquium: Gemeinsame Forschung in der Klebtechnik},
title={Methodenentwicklung zur Simulation von hyperelastischen Klebverbindungen
unter Crashbelastung}, booktitle={23. Kolloquium: Gemeinsame Forschung in der
Klebtechnik}, author={Beule, Felix and Schmelzle, Lars and Teutenberg, Dominik
and Possart, Gunnar and Meschut, Gerson and Mergheim, Julia}, year={2023}, collection={23.
Kolloquium: Gemeinsame Forschung in der Klebtechnik} }'
chicago: 'Beule, Felix, Lars Schmelzle, Dominik Teutenberg, Gunnar Possart, Gerson
Meschut, and Julia Mergheim. “Methodenentwicklung Zur Simulation von Hyperelastischen
Klebverbindungen Unter Crashbelastung.” In 23. Kolloquium: Gemeinsame Forschung
in Der Klebtechnik. 23. Kolloquium: Gemeinsame Forschung in Der Klebtechnik.
Frankfurt, 2023.'
ieee: 'F. Beule, L. Schmelzle, D. Teutenberg, G. Possart, G. Meschut, and J. Mergheim,
“Methodenentwicklung zur Simulation von hyperelastischen Klebverbindungen unter
Crashbelastung,” presented at the 23. Kolloquium: Gemeinsame Forschung in der
Klebtechnik, Frankfurt, 2023.'
mla: 'Beule, Felix, et al. “Methodenentwicklung Zur Simulation von Hyperelastischen
Klebverbindungen Unter Crashbelastung.” 23. Kolloquium: Gemeinsame Forschung
in Der Klebtechnik, 2023.'
short: 'F. Beule, L. Schmelzle, D. Teutenberg, G. Possart, G. Meschut, J. Mergheim,
in: 23. Kolloquium: Gemeinsame Forschung in Der Klebtechnik, Frankfurt, 2023.'
conference:
end_date: 2023-03-01
location: Frankfurt
name: '23. Kolloquium: Gemeinsame Forschung in der Klebtechnik'
start_date: 2023-02-28
date_created: 2023-04-26T07:12:20Z
date_updated: 2023-04-26T07:12:24Z
department:
- _id: '157'
language:
- iso: eng
place: Frankfurt
publication: '23. Kolloquium: Gemeinsame Forschung in der Klebtechnik'
series_title: '23. Kolloquium: Gemeinsame Forschung in der Klebtechnik'
status: public
title: Methodenentwicklung zur Simulation von hyperelastischen Klebverbindungen unter
Crashbelastung
type: conference_abstract
user_id: '66192'
year: '2023'
...
---
_id: '43374'
author:
- first_name: Patrick
full_name: Schürmann, Patrick
last_name: Schürmann
citation:
ama: Schürmann P. A Formal Comparison of Advanced Digital Signature Primitives.;
2023.
apa: Schürmann, P. (2023). A Formal Comparison of Advanced Digital Signature
Primitives.
bibtex: '@book{Schürmann_2023, title={ A Formal Comparison of Advanced Digital Signature
Primitives}, author={Schürmann, Patrick}, year={2023} }'
chicago: Schürmann, Patrick. A Formal Comparison of Advanced Digital Signature
Primitives, 2023.
ieee: P. Schürmann, A Formal Comparison of Advanced Digital Signature Primitives.
2023.
mla: Schürmann, Patrick. A Formal Comparison of Advanced Digital Signature Primitives.
2023.
short: P. Schürmann, A Formal Comparison of Advanced Digital Signature Primitives,
2023.
date_created: 2023-04-03T14:07:32Z
date_updated: 2023-04-25T22:43:21Z
ddc:
- '000'
department:
- _id: '64'
file:
- access_level: open_access
content_type: application/pdf
creator: bhenrik
date_created: 2023-04-25T10:49:36Z
date_updated: 2023-04-25T10:49:36Z
file_id: '44177'
file_name: masters_thesis_schuermann.pdf
file_size: 1367369
relation: main_file
title: ' A Formal Comparison of Advanced Digital Signature Primitives'
file_date_updated: 2023-04-25T10:49:36Z
has_accepted_license: '1'
language:
- iso: eng
oa: '1'
project:
- _id: '1'
name: 'SFB 901: SFB 901'
- _id: '4'
name: 'SFB 901 - C: SFB 901 - Project Area C'
- _id: '13'
name: 'SFB 901 - C1: SFB 901 - Subproject C1'
status: public
supervisor:
- first_name: Johannes
full_name: Blömer, Johannes
id: '23'
last_name: Blömer
title: ' A Formal Comparison of Advanced Digital Signature Primitives'
type: mastersthesis
user_id: '41047'
year: '2023'
...
---
_id: '44183'
author:
- first_name: Jannik
full_name: Kowatz, Jannik
id: '32252'
last_name: Kowatz
orcid: 0000-0002-4972-4718
- first_name: Dominik
full_name: Teutenberg, Dominik
id: '537'
last_name: Teutenberg
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Kowatz J, Teutenberg D, Meschut G. Weiterentwicklung der induktiven Schnellhärtung
von Klebverbindungen für robuste Fertigungsprozesse unter Berücksichtigung von
serienrelevanten Einflussfaktoren. In: DECHEMA, Gesellschaft für Chemische Technik
und Biotechnologie e.V., ed. 23. Kolloquium Gemeinsame Forschung in der Klebtechnik.
; 2023.'
apa: Kowatz, J., Teutenberg, D., & Meschut, G. (2023). Weiterentwicklung der
induktiven Schnellhärtung von Klebverbindungen für robuste Fertigungsprozesse
unter Berücksichtigung von serienrelevanten Einflussfaktoren. In DECHEMA, Gesellschaft
für Chemische Technik und Biotechnologie e.V. (Ed.), 23. Kolloquium Gemeinsame
Forschung in der Klebtechnik.
bibtex: '@inproceedings{Kowatz_Teutenberg_Meschut_2023, title={Weiterentwicklung
der induktiven Schnellhärtung von Klebverbindungen für robuste Fertigungsprozesse
unter Berücksichtigung von serienrelevanten Einflussfaktoren}, booktitle={23.
Kolloquium Gemeinsame Forschung in der Klebtechnik}, author={Kowatz, Jannik and
Teutenberg, Dominik and Meschut, Gerson}, editor={DECHEMA, Gesellschaft für Chemische
Technik und Biotechnologie e.V.}, year={2023} }'
chicago: Kowatz, Jannik, Dominik Teutenberg, and Gerson Meschut. “Weiterentwicklung
der induktiven Schnellhärtung von Klebverbindungen für robuste Fertigungsprozesse
unter Berücksichtigung von serienrelevanten Einflussfaktoren.” In 23. Kolloquium
Gemeinsame Forschung in der Klebtechnik, edited by DECHEMA, Gesellschaft für
Chemische Technik und Biotechnologie e.V., 2023.
ieee: J. Kowatz, D. Teutenberg, and G. Meschut, “Weiterentwicklung der induktiven
Schnellhärtung von Klebverbindungen für robuste Fertigungsprozesse unter Berücksichtigung
von serienrelevanten Einflussfaktoren,” in 23. Kolloquium Gemeinsame Forschung
in der Klebtechnik, Frankfurt a. M., 2023.
mla: Kowatz, Jannik, et al. “Weiterentwicklung der induktiven Schnellhärtung von
Klebverbindungen für robuste Fertigungsprozesse unter Berücksichtigung von serienrelevanten
Einflussfaktoren.” 23. Kolloquium Gemeinsame Forschung in der Klebtechnik,
edited by DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V.,
2023.
short: 'J. Kowatz, D. Teutenberg, G. Meschut, in: DECHEMA, Gesellschaft für Chemische
Technik und Biotechnologie e.V. (Ed.), 23. Kolloquium Gemeinsame Forschung in
der Klebtechnik, 2023.'
conference:
end_date: 01.03.2023
location: Frankfurt a. M.
name: 23. Kolloquium Gemeinsame Forschung in der Klebtechnik
start_date: 28.02.2023
corporate_editor:
- DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V.
date_created: 2023-04-26T07:21:47Z
date_updated: 2023-04-26T07:21:56Z
department:
- _id: '9'
- _id: '157'
language:
- iso: ger
publication: 23. Kolloquium Gemeinsame Forschung in der Klebtechnik
status: public
title: Weiterentwicklung der induktiven Schnellhärtung von Klebverbindungen für robuste
Fertigungsprozesse unter Berücksichtigung von serienrelevanten Einflussfaktoren
type: conference
user_id: '32252'
year: '2023'
...
---
_id: '42515'
abstract:
- lang: eng
text: Microcellular wood fiber reinforced polymers offer the possibility
to reduce the use of fossil raw materials. In particular, thick-walled structures
with thicknesses greater than 6 mm offer a high potential for weight savings.
This study investigates the cell structures and mechanical properties of injection-molded
test specimens. The influence of different thicknesses (6–10 mm) along with different
chemical blowing agents (endothermic, exothermic) with varying dosages (0–2 wt%)
is analyzed. The investigations reveal that exothermic chemical blowing agents
form finer cells consistently to thin-walled structures than endothermic ones.
Higher foaming agent content leads to higher pore fractions, with many small cells
coalescing into a large open-pore cell network. The mechanical properties depend
mainly on the pore content of the sample. The specific tensile properties deteriorate
with the use of chemical blowing agents (CFA), whereas the sandwich structure
produced with compact edge layers has a positive influence on the specific flexural
properties.
author:
- first_name: Elmar
full_name: Moritzer, Elmar
id: '20531'
last_name: Moritzer
- first_name: Felix
full_name: Flachmann, Felix
id: '38212'
last_name: Flachmann
orcid: 0000-0002-7651-7028
citation:
ama: Moritzer E, Flachmann F. Morphological and mechanical properties of foamed
thick-walled Wood-Plastic-Composite structures. Journal of Cellular Plastics.
2023;59(3):187-199. doi:10.1177/0021955x231161175
apa: Moritzer, E., & Flachmann, F. (2023). Morphological and mechanical properties
of foamed thick-walled Wood-Plastic-Composite structures. Journal of Cellular
Plastics, 59(3), 187–199. https://doi.org/10.1177/0021955x231161175
bibtex: '@article{Moritzer_Flachmann_2023, title={Morphological and mechanical properties
of foamed thick-walled Wood-Plastic-Composite structures}, volume={59}, DOI={10.1177/0021955x231161175},
number={3}, journal={Journal of Cellular Plastics}, publisher={SAGE Publications},
author={Moritzer, Elmar and Flachmann, Felix}, year={2023}, pages={187–199} }'
chicago: 'Moritzer, Elmar, and Felix Flachmann. “Morphological and Mechanical Properties
of Foamed Thick-Walled Wood-Plastic-Composite Structures.” Journal of Cellular
Plastics 59, no. 3 (2023): 187–99. https://doi.org/10.1177/0021955x231161175.'
ieee: 'E. Moritzer and F. Flachmann, “Morphological and mechanical properties of
foamed thick-walled Wood-Plastic-Composite structures,” Journal of Cellular
Plastics, vol. 59, no. 3, pp. 187–199, 2023, doi: 10.1177/0021955x231161175.'
mla: Moritzer, Elmar, and Felix Flachmann. “Morphological and Mechanical Properties
of Foamed Thick-Walled Wood-Plastic-Composite Structures.” Journal of Cellular
Plastics, vol. 59, no. 3, SAGE Publications, 2023, pp. 187–99, doi:10.1177/0021955x231161175.
short: E. Moritzer, F. Flachmann, Journal of Cellular Plastics 59 (2023) 187–199.
date_created: 2023-02-27T07:11:52Z
date_updated: 2023-04-26T13:40:19Z
department:
- _id: '321'
- _id: '9'
- _id: '367'
- _id: '147'
doi: 10.1177/0021955x231161175
intvolume: ' 59'
issue: '3'
keyword:
- Materials Chemistry
- Polymers and Plastics
- General Chemistry
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
page: 187-199
publication: Journal of Cellular Plastics
publication_identifier:
issn:
- 0021-955X
- 1530-7999
publication_status: published
publisher: SAGE Publications
quality_controlled: '1'
status: public
title: Morphological and mechanical properties of foamed thick-walled Wood-Plastic-Composite
structures
type: journal_article
user_id: '38212'
volume: 59
year: '2023'
...
---
_id: '42179'
author:
- first_name: Sascha Christian
full_name: Burmeister, Sascha Christian
id: '32685'
last_name: Burmeister
- first_name: Guido
full_name: Schryen, Guido
id: '72850'
last_name: Schryen
citation:
ama: 'Burmeister SC, Schryen G. Distribution Network Optimization: Predicting computation
times to design scenario analysis for network operators. Energy Systems.
Published online 2023. doi:10.1007/s12667-023-00572-5'
apa: 'Burmeister, S. C., & Schryen, G. (2023). Distribution Network Optimization:
Predicting computation times to design scenario analysis for network operators.
Energy Systems. https://doi.org/10.1007/s12667-023-00572-5'
bibtex: '@article{Burmeister_Schryen_2023, title={Distribution Network Optimization:
Predicting computation times to design scenario analysis for network operators},
DOI={10.1007/s12667-023-00572-5},
journal={Energy Systems}, publisher={Springer}, author={Burmeister, Sascha Christian
and Schryen, Guido}, year={2023} }'
chicago: 'Burmeister, Sascha Christian, and Guido Schryen. “Distribution Network
Optimization: Predicting Computation Times to Design Scenario Analysis for Network
Operators.” Energy Systems, 2023. https://doi.org/10.1007/s12667-023-00572-5.'
ieee: 'S. C. Burmeister and G. Schryen, “Distribution Network Optimization: Predicting
computation times to design scenario analysis for network operators,” Energy
Systems, 2023, doi: 10.1007/s12667-023-00572-5.'
mla: 'Burmeister, Sascha Christian, and Guido Schryen. “Distribution Network Optimization:
Predicting Computation Times to Design Scenario Analysis for Network Operators.”
Energy Systems, Springer, 2023, doi:10.1007/s12667-023-00572-5.'
short: S.C. Burmeister, G. Schryen, Energy Systems (2023).
date_created: 2023-02-17T09:44:49Z
date_updated: 2023-04-26T14:38:43Z
ddc:
- '000'
department:
- _id: '277'
doi: 10.1007/s12667-023-00572-5
file:
- access_level: open_access
content_type: application/pdf
creator: hsiemes
date_created: 2023-03-14T13:44:07Z
date_updated: 2023-03-14T13:44:07Z
file_id: '43022'
file_name: s12667-023-00572-5.pdf
file_size: 1521348
relation: main_file
file_date_updated: 2023-03-14T13:44:07Z
has_accepted_license: '1'
language:
- iso: eng
oa: '1'
publication: Energy Systems
publisher: Springer
status: public
title: 'Distribution Network Optimization: Predicting computation times to design
scenario analysis for network operators'
type: journal_article
user_id: '61579'
year: '2023'
...
---
_id: '44035'
abstract:
- lang: eng
text: Abstract. Friction-spinning as an innovative incremental forming process
enables large degrees of deformation in tube and sheet metal-forming due to a
self-induced heat generation in the forming zone. This paper presents new process
designs for energy and resource-efficient forming of gas cylinders by friction-spinning
without the use of an external heat supply. The self-generated heat enables friction-spinning
process to reduce the energy demand in the manufacture of gas cylinders, which
are usually manufactured with external heat (mostly fossil fuels), by 95 %. Typical
gas cylinder contours, such as flattened and spherical bottom ends and cylinder
necks, are manufactured by friction-spinning of AW 6060 tubular profiles with
specifically designed tool path strategies. It is shown that friction-spinning
enables the manufacture of typical gas cylinder contours with sufficient wall
thickness and the required gas tightness without the input of external heat. Thus,
this process can contribute to an increase in the energy and resource efficiency
of forming processes.
author:
- first_name: Frederik
full_name: Dahms, Frederik
id: '64977'
last_name: Dahms
- first_name: Werner
full_name: Homberg, Werner
id: '233'
last_name: Homberg
citation:
ama: 'Dahms F, Homberg W. Energy and Resource-efficient Forming of Gas Cylinders
by Friction-Spinning. In: Materials Research Proceedings. Materials Research
Forum LLC; 2023. doi:10.21741/9781644902479-208'
apa: Dahms, F., & Homberg, W. (2023). Energy and Resource-efficient Forming
of Gas Cylinders by Friction-Spinning. Materials Research Proceedings.
ESAFORM 2023, Krakau. https://doi.org/10.21741/9781644902479-208
bibtex: '@inproceedings{Dahms_Homberg_2023, title={Energy and Resource-efficient
Forming of Gas Cylinders by Friction-Spinning}, DOI={10.21741/9781644902479-208},
booktitle={Materials Research Proceedings}, publisher={Materials Research Forum
LLC}, author={Dahms, Frederik and Homberg, Werner}, year={2023} }'
chicago: Dahms, Frederik, and Werner Homberg. “Energy and Resource-Efficient Forming
of Gas Cylinders by Friction-Spinning.” In Materials Research Proceedings.
Materials Research Forum LLC, 2023. https://doi.org/10.21741/9781644902479-208.
ieee: 'F. Dahms and W. Homberg, “Energy and Resource-efficient Forming of Gas Cylinders
by Friction-Spinning,” presented at the ESAFORM 2023, Krakau, 2023, doi: 10.21741/9781644902479-208.'
mla: Dahms, Frederik, and Werner Homberg. “Energy and Resource-Efficient Forming
of Gas Cylinders by Friction-Spinning.” Materials Research Proceedings,
Materials Research Forum LLC, 2023, doi:10.21741/9781644902479-208.
short: 'F. Dahms, W. Homberg, in: Materials Research Proceedings, Materials Research
Forum LLC, 2023.'
conference:
end_date: 2023-04-21
location: Krakau
name: ESAFORM 2023
start_date: 2023-04-19
date_created: 2023-04-17T07:40:54Z
date_updated: 2023-04-27T10:30:44Z
department:
- _id: '156'
doi: 10.21741/9781644902479-208
language:
- iso: eng
publication: Materials Research Proceedings
publication_identifier:
issn:
- 2474-395X
publication_status: published
publisher: Materials Research Forum LLC
quality_controlled: '1'
related_material:
link:
- relation: confirmation
url: https://www.mrforum.com/product/9781644902479-208/
status: public
title: Energy and Resource-efficient Forming of Gas Cylinders by Friction-Spinning
type: conference
user_id: '64977'
year: '2023'
...
---
_id: '43391'
abstract:
- lang: eng
text: The technical importance of paraffins as phase change materials (PCM) in heat
storage systems increases. Knowledge on the thermal conductivity of paraffins
is necessary for the design and optimization of heat storage systems. However,
for most paraffins solely the thermal conductivity of the liquid state has been
sufficiently investigated. For the solid state, precise thermal conductivity data
are only known for a few paraffins, while only generalized values are available
for the remainder, some of which contradict each other. In this study, a measurement
setup based on the modified guarded hot plate method is developed. It is used
to investigate the thermal conductivity of several paraffines in the solid state,
including pure n-docosane and its compounds with different types and concentrations
of graphite. For n-docosane in the solid state, the thermal conductivity is determined
to be 0.49 W/(m K). A particle size of 200 μm with a spherical shape turns out
to be optimal to increase the thermal conductivity. This allows the thermal conductivity
of a compound with 10% graphite to increase by a factor of three compared to the
pure paraffin. Furthermore, significant differences to thermal conductivity data
from the literature are found.
author:
- first_name: Andreas
full_name: Paul, Andreas
id: '7828'
last_name: Paul
- first_name: Elmar
full_name: Baumhögger, Elmar
id: '15164'
last_name: Baumhögger
- first_name: Mats-Ole
full_name: Dewerth, Mats-Ole
id: '49826'
last_name: Dewerth
- first_name: Iman
full_name: Hami Dindar, Iman
id: '54836'
last_name: Hami Dindar
- first_name: Gerrit
full_name: Sonnenrein, Gerrit
last_name: Sonnenrein
- first_name: Jadran
full_name: Vrabec, Jadran
last_name: Vrabec
citation:
ama: Paul A, Baumhögger E, Dewerth M-O, Hami Dindar I, Sonnenrein G, Vrabec J. Thermal
conductivity of solid paraffins and several n-docosane compounds with graphite.
Journal of Thermal Analysis and Calorimetry. Published online 2023. doi:10.1007/s10973-023-12107-2
apa: Paul, A., Baumhögger, E., Dewerth, M.-O., Hami Dindar, I., Sonnenrein, G.,
& Vrabec, J. (2023). Thermal conductivity of solid paraffins and several n-docosane
compounds with graphite. Journal of Thermal Analysis and Calorimetry. https://doi.org/10.1007/s10973-023-12107-2
bibtex: '@article{Paul_Baumhögger_Dewerth_Hami Dindar_Sonnenrein_Vrabec_2023, title={Thermal
conductivity of solid paraffins and several n-docosane compounds with graphite},
DOI={10.1007/s10973-023-12107-2},
journal={Journal of Thermal Analysis and Calorimetry}, publisher={Springer Science
and Business Media LLC}, author={Paul, Andreas and Baumhögger, Elmar and Dewerth,
Mats-Ole and Hami Dindar, Iman and Sonnenrein, Gerrit and Vrabec, Jadran}, year={2023}
}'
chicago: Paul, Andreas, Elmar Baumhögger, Mats-Ole Dewerth, Iman Hami Dindar, Gerrit
Sonnenrein, and Jadran Vrabec. “Thermal Conductivity of Solid Paraffins and Several
N-Docosane Compounds with Graphite.” Journal of Thermal Analysis and Calorimetry,
2023. https://doi.org/10.1007/s10973-023-12107-2.
ieee: 'A. Paul, E. Baumhögger, M.-O. Dewerth, I. Hami Dindar, G. Sonnenrein, and
J. Vrabec, “Thermal conductivity of solid paraffins and several n-docosane compounds
with graphite,” Journal of Thermal Analysis and Calorimetry, 2023, doi:
10.1007/s10973-023-12107-2.'
mla: Paul, Andreas, et al. “Thermal Conductivity of Solid Paraffins and Several
N-Docosane Compounds with Graphite.” Journal of Thermal Analysis and Calorimetry,
Springer Science and Business Media LLC, 2023, doi:10.1007/s10973-023-12107-2.
short: A. Paul, E. Baumhögger, M.-O. Dewerth, I. Hami Dindar, G. Sonnenrein, J.
Vrabec, Journal of Thermal Analysis and Calorimetry (2023).
date_created: 2023-04-04T06:48:57Z
date_updated: 2023-04-27T11:10:32Z
department:
- _id: '728'
- _id: '145'
- _id: '393'
- _id: '9'
doi: 10.1007/s10973-023-12107-2
keyword:
- Physical and Theoretical Chemistry
- Condensed Matter Physics
language:
- iso: eng
publication: Journal of Thermal Analysis and Calorimetry
publication_identifier:
issn:
- 1388-6150
- 1588-2926
publication_status: published
publisher: Springer Science and Business Media LLC
quality_controlled: '1'
status: public
title: Thermal conductivity of solid paraffins and several n-docosane compounds with
graphite
type: journal_article
user_id: '7828'
year: '2023'
...
---
_id: '43394'
abstract:
- lang: ger
text: "Die für die Berechnung des Energieeffizienzindex von Haushaltskältegeräten
benötigten Parameter werden durch Norm-Messungen im Neuzustand der Geräte bestimmt.
Aus früheren Untersuchungen ist bekannt, dass durch verschiedene technische Alterungsmechanismen
der Energieverbrauch über eine Produktlebensdauer von 18 Jahren um bis zu 33 %
zunehmen kann. Ziel des vom BMWi geförderten Projekts ALGE war es, die verschie-denen
Ursachen und Einflussgrößen für die Alterung von Haushaltskältegeräten zu ermitteln
und eine Alterungs-funktion zu bestimmen, die den zeitlichen Verlauf des zunehmenden
Energieverbrauchs beschreibt.\r\nIn diesem Projekt wurde das Alterungsverhalten
von Haushaltskältegeräten durch 100 Normenergieverbrauchs-messungen an 32 real
gealterten Geräten untersucht. Aus den gewonnenen Ergebnissen konnte eine Alterungs-funktion
bestimmt werden, die den Anstieg des Energieverbrauchs beschreibt. Alle untersuchten
Geräte wurden an der Universität Paderborn im Neuzustand vermessen und nach einer
Laufzeit von bis zu 21 Jahren erneut geprüft. Bereits nach einem zweijährigen
Betrieb konnte ein Mehrverbrauch von bis zu 11 % festgestellt werden. Über die
durchschnittliche Produktlebensdauer von Haushaltskältegeräten von ca. 16 Jahren
steigert sich der Energieverbrauch um durchschnittlich 27 %.\r\nIm Rahmen des
Projekts wurden verschiedene Systemkomponenten, wie Isolierung und Verdichter,
hinsichtlich ihres Alterungsverhaltens untersucht. Bei dem im Gehäuse als Isolierung
verwendeten PUR-Schaum konnte über einen Zeitraum von 31 Monaten ein Anstieg der
Wärmeleitfähigkeit von 19,5 W/(m⋅K) auf 24,5 W/(m⋅K) festge-stellt werden. Zur
Untersuchung der Alterung der Verdichter wurden zuvor auf einem Kalorimeterteststand
ver-messene Verdichter in Geräte eingebaut. Nach einem zweijährigen Betrieb wurden
diese Verdichter wieder aus-gebaut und erneut vermessen. Hierbei konnte keine
Änderung des COP festgestellt werden. Zusätzlich zu den technischen Parametern
wurde der Einfluss des Verbraucherverhaltens analysiert. Hier zeigte sich, dass
bis zu 33 % des Gesamtenergieverbrauchs nach einer mehrjährigen Nutzungsdauer
verbraucherinduziert sein können."
author:
- first_name: Andreas
full_name: Paul, Andreas
id: '7828'
last_name: Paul
- first_name: Elmar
full_name: Baumhögger, Elmar
id: '15164'
last_name: Baumhögger
- first_name: Andreas
full_name: Elsner, Andreas
id: '16124'
last_name: Elsner
- first_name: Michael
full_name: Reineke, Michael
id: '24603'
last_name: Reineke
- first_name: Tina
full_name: Kasper, Tina
id: '94562'
last_name: Kasper
orcid: '0000-0003-3993-5316 '
- first_name: Daniel
full_name: Schumacher, Daniel
last_name: Schumacher
- first_name: Jadran
full_name: Vrabec, Jadran
last_name: Vrabec
- first_name: Christian
full_name: ' Hüppe, Christian'
last_name: ' Hüppe'
- first_name: Rainer
full_name: ' Stamminger, Rainer'
last_name: ' Stamminger'
- first_name: Heike
full_name: Hölscher, Heike
last_name: Hölscher
- first_name: Ragnar
full_name: Stoll, Ragnar
last_name: Stoll
- first_name: Hendrik
full_name: Wagner, Hendrik
last_name: Wagner
- first_name: Ulrich
full_name: ' Gries, Ulrich'
last_name: ' Gries'
- first_name: Wolfgang
full_name: Becker, Wolfgang
last_name: Becker
citation:
ama: 'Paul A, Baumhögger E, Elsner A, et al. Alterungsmechanismen von Haushaltskältegeräten.
In: Deutscher Kälte‐ und Klimatechnischer Verein e.V., ed. Deutscher Kälte‐ und
Klimatechnischer Verein e.V.; 2023.'
apa: Paul, A., Baumhögger, E., Elsner, A., Reineke, M., Kasper, T., Schumacher,
D., Vrabec, J., Hüppe, C., Stamminger, R., Hölscher, H., Stoll, R., Wagner,
H., Gries, U., & Becker, W. (2023). Alterungsmechanismen von Haushaltskältegeräten
(Deutscher Kälte‐ und Klimatechnischer Verein e.V., Ed.). Deutscher Kälte‐ und
Klimatechnischer Verein e.V.
bibtex: '@inproceedings{Paul_Baumhögger_Elsner_Reineke_Kasper_Schumacher_Vrabec_
Hüppe_ Stamminger_Hölscher_et al._2023, place={Hannover}, title={Alterungsmechanismen
von Haushaltskältegeräten}, publisher={Deutscher Kälte‐ und Klimatechnischer Verein
e.V.}, author={Paul, Andreas and Baumhögger, Elmar and Elsner, Andreas and Reineke,
Michael and Kasper, Tina and Schumacher, Daniel and Vrabec, Jadran and Hüppe,
Christian and Stamminger, Rainer and Hölscher, Heike and et al.}, editor={Deutscher
Kälte‐ und Klimatechnischer Verein e.V.}, year={2023} }'
chicago: 'Paul, Andreas, Elmar Baumhögger, Andreas Elsner, Michael Reineke, Tina
Kasper, Daniel Schumacher, Jadran Vrabec, et al. “Alterungsmechanismen von Haushaltskältegeräten.”
edited by Deutscher Kälte‐ und Klimatechnischer Verein e.V. Hannover: Deutscher
Kälte‐ und Klimatechnischer Verein e.V., 2023.'
ieee: A. Paul et al., “Alterungsmechanismen von Haushaltskältegeräten,” Magdeburg,
2023.
mla: Paul, Andreas, et al. Alterungsmechanismen von Haushaltskältegeräten.
Edited by Deutscher Kälte‐ und Klimatechnischer Verein e.V., Deutscher Kälte‐
und Klimatechnischer Verein e.V., 2023.
short: 'A. Paul, E. Baumhögger, A. Elsner, M. Reineke, T. Kasper, D. Schumacher,
J. Vrabec, C. Hüppe, R. Stamminger, H. Hölscher, R. Stoll, H. Wagner, U. Gries,
W. Becker, in: Deutscher Kälte‐ und Klimatechnischer Verein e.V. (Ed.), Deutscher
Kälte‐ und Klimatechnischer Verein e.V., Hannover, 2023.'
conference:
end_date: 2022-11-18
location: Magdeburg
name: Deutsche Kälte-Klima Tagung 48
start_date: 2022-11-16
corporate_editor:
- Deutscher Kälte‐ und Klimatechnischer Verein e.V.
date_created: 2023-04-04T12:49:16Z
date_updated: 2023-04-27T11:11:44Z
department:
- _id: '728'
- _id: '9'
keyword:
- Haushaltskältegeräte
- Energieverbrauch
- Alterung
- Verdichter
- PUR-Schaum
language:
- iso: ger
place: Hannover
publication_identifier:
isbn:
- 978-3-932715-55-6
publication_status: published
publisher: Deutscher Kälte‐ und Klimatechnischer Verein e.V.
quality_controlled: '1'
status: public
title: Alterungsmechanismen von Haushaltskältegeräten
type: conference
user_id: '7828'
year: '2023'
...
---
_id: '43034'
abstract:
- lang: eng
text: "Abstract\r\n The accessibility
to rheological parameters for concrete is becoming more and more relevant. This
is mainly related to the constantly emerging challenges, such as not only the
development of high-strength concretes is progressing very fast but also the simulation
of the flow behaviour is of high importance. The main problem, however, is that
the rheological characterisation of fresh concrete is not possible via commercial
rheometers. The so-called concrete rheometers provide valuable relative values
for comparing different concretes, but they cannot measure absolute values. Therefore,
we developed an adaptive coaxial concrete rheometer (ACCR) that allows the measurement
of fresh concrete with particles up to \r\n \r\n
\ \r\n \r\n \r\n
\ \r\n d\r\n
\ \r\n \r\n
\ max\r\n \r\n
\ \r\n =\r\n
\ 5.5\r\n \r\n mm\r\n
\ \r\n {d}_{{\\rm{\\max
}}}=5.5\\hspace{.5em}{\\rm{mm}}\r\n \r\n
\ . The comparison of the ACCR with a commercial
rheometer showed very good agreement for selected test materials (Newtonian fluid,
shear thinning fluid, suspension, and yield stress fluid), so that self-compacting
concrete was subsequently measured. Since these measurements showed a very high
reproducibility, the rheological properties of the fresh concrete could be determined
with high accuracy. The common flow models (Bingham (B), Herschel–Bulkley, modified
Bingham (MB) models) were also tested for their applicability, with the Bingham
and the modified Bingham model proving to be the best suitable ones."
author:
- first_name: Sebastian
full_name: Josch, Sebastian
id: '38243'
last_name: Josch
- first_name: Steffen
full_name: Jesinghausen, Steffen
id: '3959'
last_name: Jesinghausen
orcid: https://orcid.org/0000-0003-2611-5298
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
orcid: 000-0001-8590-1921
citation:
ama: Josch S, Jesinghausen S, Schmid H-J. Development of an adaptive coaxial concrete
rheometer and rheological characterisation of fresh concrete. Applied Rheology.
2023;33(1). doi:10.1515/arh-2022-0140
apa: Josch, S., Jesinghausen, S., & Schmid, H.-J. (2023). Development of an
adaptive coaxial concrete rheometer and rheological characterisation of fresh
concrete. Applied Rheology, 33(1). https://doi.org/10.1515/arh-2022-0140
bibtex: '@article{Josch_Jesinghausen_Schmid_2023, title={Development of an adaptive
coaxial concrete rheometer and rheological characterisation of fresh concrete},
volume={33}, DOI={10.1515/arh-2022-0140},
number={1}, journal={Applied Rheology}, publisher={Walter de Gruyter GmbH}, author={Josch,
Sebastian and Jesinghausen, Steffen and Schmid, Hans-Joachim}, year={2023} }'
chicago: Josch, Sebastian, Steffen Jesinghausen, and Hans-Joachim Schmid. “Development
of an Adaptive Coaxial Concrete Rheometer and Rheological Characterisation of
Fresh Concrete.” Applied Rheology 33, no. 1 (2023). https://doi.org/10.1515/arh-2022-0140.
ieee: 'S. Josch, S. Jesinghausen, and H.-J. Schmid, “Development of an adaptive
coaxial concrete rheometer and rheological characterisation of fresh concrete,”
Applied Rheology, vol. 33, no. 1, 2023, doi: 10.1515/arh-2022-0140.'
mla: Josch, Sebastian, et al. “Development of an Adaptive Coaxial Concrete Rheometer
and Rheological Characterisation of Fresh Concrete.” Applied Rheology,
vol. 33, no. 1, Walter de Gruyter GmbH, 2023, doi:10.1515/arh-2022-0140.
short: S. Josch, S. Jesinghausen, H.-J. Schmid, Applied Rheology 33 (2023).
date_created: 2023-03-16T19:06:49Z
date_updated: 2023-04-27T11:19:08Z
department:
- _id: '150'
doi: 10.1515/arh-2022-0140
intvolume: ' 33'
issue: '1'
keyword:
- Condensed Matter Physics
- General Materials Science
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.degruyter.com/document/doi/10.1515/arh-2022-0140/html
oa: '1'
publication: Applied Rheology
publication_identifier:
issn:
- 1617-8106
publication_status: published
publisher: Walter de Gruyter GmbH
quality_controlled: '1'
status: public
title: Development of an adaptive coaxial concrete rheometer and rheological characterisation
of fresh concrete
type: journal_article
user_id: '3959'
volume: 33
year: '2023'
...
---
_id: '44225'
author:
- first_name: Yvonne Kristin
full_name: Jende, Yvonne Kristin
id: '24615'
last_name: Jende
citation:
ama: 'Jende YK. Please Mind the Gap. Reconfiguring Solidarity through Space in Michael
Nicoll Yahgulanaas’ Haida Manga Art. In: Solidarités. Réseaux – Convivialités
– Confrontations/ Solidarities. Networks – Convivialities – Confrontations, 44.
Annual Conference of the Association for Canadian Studies in German-Speaking Countries.
; 2023.'
apa: Jende, Y. K. (2023). Please Mind the Gap. Reconfiguring Solidarity through
Space in Michael Nicoll Yahgulanaas’ Haida Manga Art. Solidarités. Réseaux
– Convivialités – Confrontations/ Solidarities. Networks – Convivialities – Confrontations,
44. Annual Conference of the Association for Canadian Studies in German-Speaking
Countries. Solidarités. Réseaux – Convivialités – Confrontations/ Solidarities.
Networks – Convivialities – Confrontations, 44. Annual Conference of the Association
for Canadian Studies in German-Speaking Countries, Grainau.
bibtex: '@inproceedings{Jende_2023, place={Grainau}, title={Please Mind the Gap.
Reconfiguring Solidarity through Space in Michael Nicoll Yahgulanaas’ Haida Manga
Art.}, booktitle={Solidarités. Réseaux – Convivialités – Confrontations/ Solidarities.
Networks – Convivialities – Confrontations, 44. Annual Conference of the Association
for Canadian Studies in German-Speaking Countries}, author={Jende, Yvonne Kristin},
year={2023} }'
chicago: Jende, Yvonne Kristin. “Please Mind the Gap. Reconfiguring Solidarity through
Space in Michael Nicoll Yahgulanaas’ Haida Manga Art.” In Solidarités. Réseaux
– Convivialités – Confrontations/ Solidarities. Networks – Convivialities – Confrontations,
44. Annual Conference of the Association for Canadian Studies in German-Speaking
Countries. Grainau, 2023.
ieee: Y. K. Jende, “Please Mind the Gap. Reconfiguring Solidarity through Space
in Michael Nicoll Yahgulanaas’ Haida Manga Art.,” presented at the Solidarités.
Réseaux – Convivialités – Confrontations/ Solidarities. Networks – Convivialities
– Confrontations, 44. Annual Conference of the Association for Canadian Studies
in German-Speaking Countries, Grainau, 2023.
mla: Jende, Yvonne Kristin. “Please Mind the Gap. Reconfiguring Solidarity through
Space in Michael Nicoll Yahgulanaas’ Haida Manga Art.” Solidarités. Réseaux
– Convivialités – Confrontations/ Solidarities. Networks – Convivialities – Confrontations,
44. Annual Conference of the Association for Canadian Studies in German-Speaking
Countries, 2023.
short: 'Y.K. Jende, in: Solidarités. Réseaux – Convivialités – Confrontations/ Solidarities.
Networks – Convivialities – Confrontations, 44. Annual Conference of the Association
for Canadian Studies in German-Speaking Countries, Grainau, 2023.'
conference:
end_date: 2023-03-05
location: Grainau
name: Solidarités. Réseaux – Convivialités – Confrontations/ Solidarities. Networks
– Convivialities – Confrontations, 44. Annual Conference of the Association for
Canadian Studies in German-Speaking Countries
start_date: 2023-03-03
date_created: 2023-04-27T11:33:27Z
date_updated: 2023-04-27T11:33:37Z
department:
- _id: '1'
- _id: '381'
language:
- iso: eng
place: Grainau
publication: Solidarités. Réseaux – Convivialités – Confrontations/ Solidarities.
Networks – Convivialities – Confrontations, 44. Annual Conference of the Association
for Canadian Studies in German-Speaking Countries
status: public
title: Please Mind the Gap. Reconfiguring Solidarity through Space in Michael Nicoll
Yahgulanaas' Haida Manga Art.
type: conference
user_id: '24615'
year: '2023'
...
---
_id: '43128'
article_number: '118460'
author:
- first_name: Moritz Johannes
full_name: Rüther, Moritz Johannes
id: '38188'
last_name: Rüther
- first_name: Sven Helge
full_name: Klippstein, Sven Helge
id: '71545'
last_name: Klippstein
- first_name: SathishKumar
full_name: Ponusamy, SathishKumar
id: '77383'
last_name: Ponusamy
- first_name: Torben
full_name: Rüther, Torben
id: '76950'
last_name: Rüther
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
orcid: 000-0001-8590-1921
citation:
ama: Rüther MJ, Klippstein SH, Ponusamy S, Rüther T, Schmid H-J. Flowability of
polymer powders at elevated temperatures for additive manufacturing. Powder
Technology. 2023;422. doi:10.1016/j.powtec.2023.118460
apa: Rüther, M. J., Klippstein, S. H., Ponusamy, S., Rüther, T., & Schmid, H.-J.
(2023). Flowability of polymer powders at elevated temperatures for additive manufacturing.
Powder Technology, 422, Article 118460. https://doi.org/10.1016/j.powtec.2023.118460
bibtex: '@article{Rüther_Klippstein_Ponusamy_Rüther_Schmid_2023, title={Flowability
of polymer powders at elevated temperatures for additive manufacturing}, volume={422},
DOI={10.1016/j.powtec.2023.118460},
number={118460}, journal={Powder Technology}, publisher={Elsevier BV}, author={Rüther,
Moritz Johannes and Klippstein, Sven Helge and Ponusamy, SathishKumar and Rüther,
Torben and Schmid, Hans-Joachim}, year={2023} }'
chicago: Rüther, Moritz Johannes, Sven Helge Klippstein, SathishKumar Ponusamy,
Torben Rüther, and Hans-Joachim Schmid. “Flowability of Polymer Powders at Elevated
Temperatures for Additive Manufacturing.” Powder Technology 422 (2023).
https://doi.org/10.1016/j.powtec.2023.118460.
ieee: 'M. J. Rüther, S. H. Klippstein, S. Ponusamy, T. Rüther, and H.-J. Schmid,
“Flowability of polymer powders at elevated temperatures for additive manufacturing,”
Powder Technology, vol. 422, Art. no. 118460, 2023, doi: 10.1016/j.powtec.2023.118460.'
mla: Rüther, Moritz Johannes, et al. “Flowability of Polymer Powders at Elevated
Temperatures for Additive Manufacturing.” Powder Technology, vol. 422,
118460, Elsevier BV, 2023, doi:10.1016/j.powtec.2023.118460.
short: M.J. Rüther, S.H. Klippstein, S. Ponusamy, T. Rüther, H.-J. Schmid, Powder
Technology 422 (2023).
date_created: 2023-03-27T19:57:12Z
date_updated: 2023-04-27T12:33:28Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
doi: 10.1016/j.powtec.2023.118460
intvolume: ' 422'
keyword:
- General Chemical Engineering
language:
- iso: eng
publication: Powder Technology
publication_identifier:
issn:
- 0032-5910
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Flowability of polymer powders at elevated temperatures for additive manufacturing
type: journal_article
user_id: '71545'
volume: 422
year: '2023'
...
---
_id: '39057'
author:
- first_name: Jan
full_name: Wippermann, Jan
id: '55686'
last_name: Wippermann
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Wikentji
full_name: Koschukow, Wikentji
last_name: Koschukow
- first_name: Alexander
full_name: Liebsch, Alexander
last_name: Liebsch
- first_name: Maik
full_name: Gude, Maik
last_name: Gude
- first_name: Steven
full_name: Minch, Steven
last_name: Minch
- first_name: Björn
full_name: Kolbe, Björn
last_name: Kolbe
citation:
ama: Wippermann J, Meschut G, Koschukow W, et al. Thermal influence of resistance
spot welding on a nearby overmolded thermoplastic–metal joint. Welding in the
World. Published online 2023. doi:10.1007/s40194-023-01465-y
apa: Wippermann, J., Meschut, G., Koschukow, W., Liebsch, A., Gude, M., Minch, S.,
& Kolbe, B. (2023). Thermal influence of resistance spot welding on a nearby
overmolded thermoplastic–metal joint. Welding in the World. https://doi.org/10.1007/s40194-023-01465-y
bibtex: '@article{Wippermann_Meschut_Koschukow_Liebsch_Gude_Minch_Kolbe_2023, title={Thermal
influence of resistance spot welding on a nearby overmolded thermoplastic–metal
joint}, DOI={10.1007/s40194-023-01465-y},
journal={Welding in the World}, publisher={Springer Science and Business Media
LLC}, author={Wippermann, Jan and Meschut, Gerson and Koschukow, Wikentji and
Liebsch, Alexander and Gude, Maik and Minch, Steven and Kolbe, Björn}, year={2023}
}'
chicago: Wippermann, Jan, Gerson Meschut, Wikentji Koschukow, Alexander Liebsch,
Maik Gude, Steven Minch, and Björn Kolbe. “Thermal Influence of Resistance Spot
Welding on a Nearby Overmolded Thermoplastic–Metal Joint.” Welding in the World,
2023. https://doi.org/10.1007/s40194-023-01465-y.
ieee: 'J. Wippermann et al., “Thermal influence of resistance spot welding
on a nearby overmolded thermoplastic–metal joint,” Welding in the World,
2023, doi: 10.1007/s40194-023-01465-y.'
mla: Wippermann, Jan, et al. “Thermal Influence of Resistance Spot Welding on a
Nearby Overmolded Thermoplastic–Metal Joint.” Welding in the World, Springer
Science and Business Media LLC, 2023, doi:10.1007/s40194-023-01465-y.
short: J. Wippermann, G. Meschut, W. Koschukow, A. Liebsch, M. Gude, S. Minch, B.
Kolbe, Welding in the World (2023).
date_created: 2023-01-24T08:49:01Z
date_updated: 2023-04-27T14:21:46Z
department:
- _id: '157'
doi: 10.1007/s40194-023-01465-y
keyword:
- Metals and Alloys
- Mechanical Engineering
- Mechanics of Materials
language:
- iso: eng
publication: Welding in the World
publication_identifier:
issn:
- 0043-2288
- 1878-6669
publication_status: published
publisher: Springer Science and Business Media LLC
quality_controlled: '1'
status: public
title: Thermal influence of resistance spot welding on a nearby overmolded thermoplastic–metal
joint
type: journal_article
user_id: '55686'
year: '2023'
...
---
_id: '44232'
author:
- first_name: Jan
full_name: Wippermann, Jan
id: '55686'
last_name: Wippermann
- first_name: Wikentij
full_name: Koshukow, Wikentij
last_name: Koshukow
- first_name: Alexander
full_name: Liebsch, Alexander
last_name: Liebsch
- first_name: Björn
full_name: Kolbe, Björn
last_name: Kolbe
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Maik
full_name: Gude, Maik
last_name: Gude
citation:
ama: Wippermann J, Koshukow W, Liebsch A, Kolbe B, Meschut G, Gude M. Influence
of plasma coating pretreatment on the adhesion of thermoplastics to metals. Tagungsband
Münchener Leichtbauseminar 2022. Published online 2023.
apa: Wippermann, J., Koshukow, W., Liebsch, A., Kolbe, B., Meschut, G., & Gude,
M. (2023). Influence of plasma coating pretreatment on the adhesion of thermoplastics
to metals. Tagungsband Münchener Leichtbauseminar 2022.
bibtex: '@article{Wippermann_Koshukow_Liebsch_Kolbe_Meschut_Gude_2023, title={Influence
of plasma coating pretreatment on the adhesion of thermoplastics to metals}, journal={Tagungsband
Münchener Leichtbauseminar 2022}, author={Wippermann, Jan and Koshukow, Wikentij
and Liebsch, Alexander and Kolbe, Björn and Meschut, Gerson and Gude, Maik}, year={2023}
}'
chicago: Wippermann, Jan, Wikentij Koshukow, Alexander Liebsch, Björn Kolbe, Gerson
Meschut, and Maik Gude. “Influence of Plasma Coating Pretreatment on the Adhesion
of Thermoplastics to Metals.” Tagungsband Münchener Leichtbauseminar 2022,
2023.
ieee: J. Wippermann, W. Koshukow, A. Liebsch, B. Kolbe, G. Meschut, and M. Gude,
“Influence of plasma coating pretreatment on the adhesion of thermoplastics to
metals,” Tagungsband Münchener Leichtbauseminar 2022, 2023.
mla: Wippermann, Jan, et al. “Influence of Plasma Coating Pretreatment on the Adhesion
of Thermoplastics to Metals.” Tagungsband Münchener Leichtbauseminar 2022,
2023.
short: J. Wippermann, W. Koshukow, A. Liebsch, B. Kolbe, G. Meschut, M. Gude, Tagungsband
Münchener Leichtbauseminar 2022 (2023).
date_created: 2023-04-27T14:17:04Z
date_updated: 2023-04-27T14:21:36Z
department:
- _id: '157'
language:
- iso: eng
publication: Tagungsband Münchener Leichtbauseminar 2022
quality_controlled: '1'
status: public
title: Influence of plasma coating pretreatment on the adhesion of thermoplastics
to metals
type: journal_article
user_id: '55686'
year: '2023'
...
---
_id: '44244'
author:
- first_name: SathishKumar
full_name: Ponusamy, SathishKumar
id: '77383'
last_name: Ponusamy
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
orcid: 000-0001-8590-1921
citation:
ama: 'Ponusamy S, Schmid H-J. Dynamisch-mechanische Polymerpartikelverrundung zur
Verbesserung der Fließfähigkeit für das selektive Lasersintern. In: ; 2023.'
apa: Ponusamy, S., & Schmid, H.-J. (2023). Dynamisch-mechanische Polymerpartikelverrundung
zur Verbesserung der Fließfähigkeit für das selektive Lasersintern. Jahrestreffen
der Fachgruppen Zerkleinern / Klassieren / Agglomerations- und Schüttguttechnik,
Braunschweig.
bibtex: '@inproceedings{Ponusamy_Schmid_2023, title={Dynamisch-mechanische Polymerpartikelverrundung
zur Verbesserung der Fließfähigkeit für das selektive Lasersintern}, author={Ponusamy,
SathishKumar and Schmid, Hans-Joachim}, year={2023} }'
chicago: Ponusamy, SathishKumar, and Hans-Joachim Schmid. “Dynamisch-Mechanische
Polymerpartikelverrundung Zur Verbesserung Der Fließfähigkeit Für Das Selektive
Lasersintern,” 2023.
ieee: S. Ponusamy and H.-J. Schmid, “Dynamisch-mechanische Polymerpartikelverrundung
zur Verbesserung der Fließfähigkeit für das selektive Lasersintern,” presented
at the Jahrestreffen der Fachgruppen Zerkleinern / Klassieren / Agglomerations-
und Schüttguttechnik, Braunschweig, 2023.
mla: Ponusamy, SathishKumar, and Hans-Joachim Schmid. Dynamisch-Mechanische Polymerpartikelverrundung
Zur Verbesserung Der Fließfähigkeit Für Das Selektive Lasersintern. 2023.
short: 'S. Ponusamy, H.-J. Schmid, in: 2023.'
conference:
end_date: 2023-03-23
location: Braunschweig
name: Jahrestreffen der Fachgruppen Zerkleinern / Klassieren / Agglomerations- und
Schüttguttechnik
start_date: 2023-03-21
date_created: 2023-04-27T19:44:07Z
date_updated: 2023-04-27T19:47:17Z
ddc:
- '620'
department:
- _id: '150'
file:
- access_level: closed
content_type: application/pdf
creator: ponusamy
date_created: 2023-04-27T19:42:18Z
date_updated: 2023-04-27T19:47:17Z
file_id: '44245'
file_name: MechPartRund_Ponusamy_ProcNet23.pdf
file_size: 63115
relation: main_file
file_date_updated: 2023-04-27T19:47:17Z
has_accepted_license: '1'
language:
- iso: eng
status: public
title: Dynamisch-mechanische Polymerpartikelverrundung zur Verbesserung der Fließfähigkeit
für das selektive Lasersintern
type: conference_abstract
user_id: '77383'
year: '2023'
...
---
_id: '44249'
abstract:
- lang: eng
text: State education in honest tax payment can be understood as a facet of training
in citizenship, i.e. as an attempt by the modern state to standardize the behavior
of its citizens and to prevent deviations. Based on this Foucauldian understanding,
this exploratory article examines tax education in the United States, Spain, and
West Germany from the mid-1940s to the late 1980s. During this period, the USA
asserted itself as the champion of tax education and Spain consistently tried
to emulate this example, albeit with more modest means and different semantic
strategies from as early as the 1960s, when it was still under a autoritarian
regime. The FRG, however, completely discontinued its few early attempts at tax
education from the mid-1950s onwards. Even during the economic crises and tax
scandals of the 1970s, there was no relaunch of the programs. The article locates
the reasons for this highly uneven development in the different ideal images of
the citizen in the three states.
author:
- first_name: Korinna
full_name: Schönhärl, Korinna
id: '89037'
last_name: Schönhärl
orcid: 0000-0002-7967-3261
- first_name: Nasrin
full_name: Düll, Nasrin
last_name: Düll
- first_name: Nadya Melina
full_name: Ramírez Lugo , Nadya Melina
last_name: 'Ramírez Lugo '
citation:
ama: 'Schönhärl K, Düll N, Ramírez Lugo NM. Tax Education After WWII: How Spain,
the USA, and West Germany Tried to Make Their Citizens Pay Honestly. In: Sébastien
G, Hadrien B, eds. Tax Evasion and Tax Havens since the Nineteenth Century
. Springer; 2023:355-376.'
apa: 'Schönhärl, K., Düll, N., & Ramírez Lugo , N. M. (2023). Tax Education
After WWII: How Spain, the USA, and West Germany Tried to Make Their Citizens
Pay Honestly. In G. Sébastien & B. Hadrien (Eds.), Tax Evasion and Tax
Havens since the Nineteenth Century (pp. 355–376). Springer.'
bibtex: '@inbook{Schönhärl_Düll_Ramírez Lugo _2023, title={Tax Education After WWII:
How Spain, the USA, and West Germany Tried to Make Their Citizens Pay Honestly},
booktitle={Tax Evasion and Tax Havens since the Nineteenth Century }, publisher={Springer},
author={Schönhärl, Korinna and Düll, Nasrin and Ramírez Lugo , Nadya Melina},
editor={Sébastien, Guex and Hadrien, Buclin}, year={2023}, pages={355–376} }'
chicago: 'Schönhärl, Korinna, Nasrin Düll, and Nadya Melina Ramírez Lugo . “Tax
Education After WWII: How Spain, the USA, and West Germany Tried to Make Their
Citizens Pay Honestly.” In Tax Evasion and Tax Havens since the Nineteenth
Century , edited by Guex Sébastien and Buclin Hadrien, 355–76. Springer, 2023.'
ieee: 'K. Schönhärl, N. Düll, and N. M. Ramírez Lugo , “Tax Education After WWII:
How Spain, the USA, and West Germany Tried to Make Their Citizens Pay Honestly,”
in Tax Evasion and Tax Havens since the Nineteenth Century , G. Sébastien
and B. Hadrien, Eds. Springer, 2023, pp. 355–376.'
mla: 'Schönhärl, Korinna, et al. “Tax Education After WWII: How Spain, the USA,
and West Germany Tried to Make Their Citizens Pay Honestly.” Tax Evasion and
Tax Havens since the Nineteenth Century , edited by Guex Sébastien and Buclin
Hadrien, Springer, 2023, pp. 355–76.'
short: 'K. Schönhärl, N. Düll, N.M. Ramírez Lugo , in: G. Sébastien, B. Hadrien
(Eds.), Tax Evasion and Tax Havens since the Nineteenth Century , Springer, 2023,
pp. 355–376.'
date_created: 2023-04-28T06:58:36Z
date_updated: 2023-04-28T06:58:49Z
ddc:
- '900'
department:
- _id: '445'
editor:
- first_name: Guex
full_name: Sébastien, Guex
last_name: Sébastien
- first_name: Buclin
full_name: Hadrien, Buclin
last_name: Hadrien
file:
- access_level: closed
content_type: application/pdf
creator: schoenha
date_created: 2023-04-28T06:57:48Z
date_updated: 2023-04-28T06:57:48Z
file_id: '44250'
file_name: Schönhärl Düll Ramirez Tax Education.pdf
file_size: 354595
relation: main_file
success: 1
file_date_updated: 2023-04-28T06:57:48Z
has_accepted_license: '1'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://link.springer.com/chapter/10.1007/978-3-031-18119-1_17
oa: '1'
page: 355-376
publication: 'Tax Evasion and Tax Havens since the Nineteenth Century '
publication_status: published
publisher: Springer
quality_controlled: '1'
status: public
title: 'Tax Education After WWII: How Spain, the USA, and West Germany Tried to Make
Their Citizens Pay Honestly'
type: book_chapter
user_id: '89037'
year: '2023'
...
---
_id: '44154'
abstract:
- lang: eng
text: Abstract. Due to an increasing volume of shipments, there is a significant
need for more delivery vehicles. One approach to reduce the associated increase
in carbon dioxide (CO2) emissions is a new light weight design approach involving
the substitution of conventional materials with glass fiber mat-reinforced thermoplastics
(GMT) based on polypropylene (PP). The application of GMT by compression molding
is a widely used process in the automotive industry. However, application in the
commercial vehicle sector requires much larger dimensions, making it necessary
to clarify whether the manufacturing process and material are suitable for semi-structural
applications on this scale. To find this out, two replacement geometries are abstracted
in this study and manufactured by varying the main manufacturing parameters. The
feasibility can be demonstrated by recording and analyzing the resulting process
variables and measuring the formed fiber distribution. At the end of the paper,
recommendations are given for the production of GMT structures on the scale of
commercial vehicles.
author:
- first_name: Julian
full_name: Lückenkötter, Julian
id: '45543'
last_name: Lückenkötter
- first_name: J.P.
full_name: Leimbach, J.P.
last_name: Leimbach
- first_name: Tim
full_name: Stallmeister, Tim
id: '45538'
last_name: Stallmeister
- first_name: Thorsten
full_name: Marten, Thorsten
id: '338'
last_name: Marten
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Lückenkötter J, Leimbach JP, Stallmeister T, Marten T, Tröster T. Feasibility
Study of Compression Molding for Large Reinforcement Structures in the Commercial
Vehicle Sector. In: Materials Research Proceedings. Vol 28. Materials Research
Forum LLC; 2023:249-258. doi:10.21741/9781644902479-27'
apa: Lückenkötter, J., Leimbach, J. P., Stallmeister, T., Marten, T., & Tröster,
T. (2023). Feasibility Study of Compression Molding for Large Reinforcement Structures
in the Commercial Vehicle Sector. Materials Research Proceedings, 28,
249–258. https://doi.org/10.21741/9781644902479-27
bibtex: '@inproceedings{Lückenkötter_Leimbach_Stallmeister_Marten_Tröster_2023,
title={Feasibility Study of Compression Molding for Large Reinforcement Structures
in the Commercial Vehicle Sector}, volume={28}, DOI={10.21741/9781644902479-27},
booktitle={Materials Research Proceedings}, publisher={Materials Research Forum
LLC}, author={Lückenkötter, Julian and Leimbach, J.P. and Stallmeister, Tim and
Marten, Thorsten and Tröster, Thomas}, year={2023}, pages={249–258} }'
chicago: Lückenkötter, Julian, J.P. Leimbach, Tim Stallmeister, Thorsten Marten,
and Thomas Tröster. “Feasibility Study of Compression Molding for Large Reinforcement
Structures in the Commercial Vehicle Sector.” In Materials Research Proceedings,
28:249–58. Materials Research Forum LLC, 2023. https://doi.org/10.21741/9781644902479-27.
ieee: 'J. Lückenkötter, J. P. Leimbach, T. Stallmeister, T. Marten, and T. Tröster,
“Feasibility Study of Compression Molding for Large Reinforcement Structures in
the Commercial Vehicle Sector,” in Materials Research Proceedings, Krakow,
Poland, 2023, vol. 28, pp. 249–258, doi: 10.21741/9781644902479-27.'
mla: Lückenkötter, Julian, et al. “Feasibility Study of Compression Molding for
Large Reinforcement Structures in the Commercial Vehicle Sector.” Materials
Research Proceedings, vol. 28, Materials Research Forum LLC, 2023, pp. 249–58,
doi:10.21741/9781644902479-27.
short: 'J. Lückenkötter, J.P. Leimbach, T. Stallmeister, T. Marten, T. Tröster,
in: Materials Research Proceedings, Materials Research Forum LLC, 2023, pp. 249–258.'
conference:
end_date: 2023-04-21
location: Krakow, Poland
name: ESAFORM 2023
start_date: 2023-04-19
date_created: 2023-04-24T14:14:11Z
date_updated: 2023-05-01T09:18:12Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.21741/9781644902479-27
intvolume: ' 28'
keyword:
- Compression Molding
- Fiber Content
- Process Development
- Lightweight Design
language:
- iso: eng
page: 249-258
publication: Materials Research Proceedings
publication_identifier:
eissn:
- 978-1-64490-247-9
publication_status: published
publisher: Materials Research Forum LLC
quality_controlled: '1'
status: public
title: Feasibility Study of Compression Molding for Large Reinforcement Structures
in the Commercial Vehicle Sector
type: conference
user_id: '45543'
volume: 28
year: '2023'
...