---
_id: '43457'
abstract:
- lang: eng
text: The production of hydrogen and the utilization of biomass for sustainable
concepts of energy conversion and storage require gas sensors that discriminate
between hydrogen (H2) and carbon monoxide (CO). Mesoporous copper–ceria (Cu–CeO2)
materials with large specific surface areas and uniform porosity are prepared
by nanocasting, and their textural properties are characterized by N2 physisorption,
powder XRD, scanning electron microscopy, transmission electron microscopy, and
energy-dispersive X-ray spectroscopy. The oxidation states of copper (Cu+, Cu2+)
and cerium (Ce3+, Ce4+) are investigated by XPS. The materials are used as resistive
gas sensors for H2 and CO. The sensors show a stronger response to CO than to
H2 and low cross-sensitivity to humidity. Copper turns out to be a necessary component;
copper-free ceria materials prepared by the same method show only poor sensing
performance. By measuring both gases (CO and H2) simultaneously, it is shown that
this behavior can be utilized for selective sensing of CO in the presence of H2.
author:
- first_name: Dominik
full_name: Baier, Dominik
last_name: Baier
- first_name: Tatiana
full_name: Priamushko, Tatiana
last_name: Priamushko
- first_name: Christian
full_name: Weinberger, Christian
id: '11848'
last_name: Weinberger
- first_name: Freddy
full_name: Kleitz, Freddy
last_name: Kleitz
- first_name: Michael
full_name: Tiemann, Michael
id: '23547'
last_name: Tiemann
orcid: 0000-0003-1711-2722
citation:
ama: Baier D, Priamushko T, Weinberger C, Kleitz F, Tiemann M. Selective Discrimination
between CO and H2 with Copper–Ceria-Resistive Gas Sensors. ACS Sensors.
2023;8(4):1616-1623. doi:10.1021/acssensors.2c02739
apa: Baier, D., Priamushko, T., Weinberger, C., Kleitz, F., & Tiemann, M. (2023).
Selective Discrimination between CO and H2 with Copper–Ceria-Resistive Gas Sensors.
ACS Sensors, 8(4), 1616–1623. https://doi.org/10.1021/acssensors.2c02739
bibtex: '@article{Baier_Priamushko_Weinberger_Kleitz_Tiemann_2023, title={Selective
Discrimination between CO and H2 with Copper–Ceria-Resistive Gas Sensors}, volume={8},
DOI={10.1021/acssensors.2c02739},
number={4}, journal={ACS Sensors}, publisher={American Chemical Society (ACS)},
author={Baier, Dominik and Priamushko, Tatiana and Weinberger, Christian and Kleitz,
Freddy and Tiemann, Michael}, year={2023}, pages={1616–1623} }'
chicago: 'Baier, Dominik, Tatiana Priamushko, Christian Weinberger, Freddy Kleitz,
and Michael Tiemann. “Selective Discrimination between CO and H2 with Copper–Ceria-Resistive
Gas Sensors.” ACS Sensors 8, no. 4 (2023): 1616–23. https://doi.org/10.1021/acssensors.2c02739.'
ieee: 'D. Baier, T. Priamushko, C. Weinberger, F. Kleitz, and M. Tiemann, “Selective
Discrimination between CO and H2 with Copper–Ceria-Resistive Gas Sensors,” ACS
Sensors, vol. 8, no. 4, pp. 1616–1623, 2023, doi: 10.1021/acssensors.2c02739.'
mla: Baier, Dominik, et al. “Selective Discrimination between CO and H2 with Copper–Ceria-Resistive
Gas Sensors.” ACS Sensors, vol. 8, no. 4, American Chemical Society (ACS),
2023, pp. 1616–23, doi:10.1021/acssensors.2c02739.
short: D. Baier, T. Priamushko, C. Weinberger, F. Kleitz, M. Tiemann, ACS Sensors
8 (2023) 1616–1623.
date_created: 2023-04-12T06:52:34Z
date_updated: 2023-05-01T05:47:53Z
department:
- _id: '35'
- _id: '2'
- _id: '307'
doi: 10.1021/acssensors.2c02739
intvolume: ' 8'
issue: '4'
keyword:
- Fluid Flow and Transfer Processes
- Process Chemistry and Technology
- Instrumentation
- Bioengineering
language:
- iso: eng
page: 1616 - 1623
publication: ACS Sensors
publication_identifier:
issn:
- 2379-3694
- 2379-3694
publication_status: published
publisher: American Chemical Society (ACS)
quality_controlled: '1'
status: public
title: Selective Discrimination between CO and H2 with Copper–Ceria-Resistive Gas
Sensors
type: journal_article
user_id: '23547'
volume: 8
year: '2023'
...
---
_id: '43044'
abstract:
- lang: eng
text: Abstract. The combination of incremental sheet metal forming and high-speed
forming offers new possibilities for flexible forming processes in the production
of large sheet metal components of increased complexity with relatively low forming
energies. In this paper, the general feasibility and process differences between
the pulse-driven high-speed forming technologies of electrohydraulic and electromagnetic
forming were investigated. An example component made of EN AW 6016 aluminum sheet
metal was thus formed incrementally by both processes and the forming result evaluated
by an optical 3D measurement system. For this purpose, a forming strategy for
electromagnetic incremental forming (EMIF) was developed, tested and adapted to
the electrohydraulic incremental forming process (EHIF). The discharge energy,
the tool displacement and the pressure field of the forming zone were determined
as relevant parameters for the definition of an adequate tool path strategy. It
was found that the EHIF process is less affected by larger distances between the
tool and the blank, while this is a critical variable for force application to
the component during EMIF. On the other hand, the more uniform pressure distribution
of the EMIF process is advantageous for forming large steady component areas.
author:
- first_name: Maik
full_name: Holzmüller, Maik
id: '82645'
last_name: Holzmüller
- first_name: Maik
full_name: Linnemann, Maik
last_name: Linnemann
- first_name: Werner
full_name: Homberg, Werner
id: '233'
last_name: Homberg
- first_name: Verena
full_name: Psyk, Verena
last_name: Psyk
- first_name: 'Verena '
full_name: 'Kräusel, Verena '
last_name: Kräusel
- first_name: Janika
full_name: Kroos, Janika
last_name: Kroos
citation:
ama: 'Holzmüller M, Linnemann M, Homberg W, Psyk V, Kräusel V, Kroos J. Proof of
concept for incremental sheet metal forming by means of electromagnetic and electrohydraulic
high-speed forming. In: Materials Research Proceedings. Vol 25. Materials
Research Forum LLC; 2023:11-18. doi:10.21741/9781644902417-2'
apa: Holzmüller, M., Linnemann, M., Homberg, W., Psyk, V., Kräusel, V., & Kroos,
J. (2023). Proof of concept for incremental sheet metal forming by means of electromagnetic
and electrohydraulic high-speed forming. Materials Research Proceedings,
25, 11–18. https://doi.org/10.21741/9781644902417-2
bibtex: '@inproceedings{Holzmüller_Linnemann_Homberg_Psyk_Kräusel_Kroos_2023, title={Proof
of concept for incremental sheet metal forming by means of electromagnetic and
electrohydraulic high-speed forming}, volume={25}, DOI={10.21741/9781644902417-2},
booktitle={Materials Research Proceedings}, publisher={Materials Research Forum
LLC}, author={Holzmüller, Maik and Linnemann, Maik and Homberg, Werner and Psyk,
Verena and Kräusel, Verena and Kroos, Janika}, year={2023}, pages={11–18} }'
chicago: Holzmüller, Maik, Maik Linnemann, Werner Homberg, Verena Psyk, Verena Kräusel,
and Janika Kroos. “Proof of Concept for Incremental Sheet Metal Forming by Means
of Electromagnetic and Electrohydraulic High-Speed Forming.” In Materials Research
Proceedings, 25:11–18. Materials Research Forum LLC, 2023. https://doi.org/10.21741/9781644902417-2.
ieee: 'M. Holzmüller, M. Linnemann, W. Homberg, V. Psyk, V. Kräusel, and J. Kroos,
“Proof of concept for incremental sheet metal forming by means of electromagnetic
and electrohydraulic high-speed forming,” in Materials Research Proceedings,
Nürnberg, 2023, vol. 25, pp. 11–18, doi: 10.21741/9781644902417-2.'
mla: Holzmüller, Maik, et al. “Proof of Concept for Incremental Sheet Metal Forming
by Means of Electromagnetic and Electrohydraulic High-Speed Forming.” Materials
Research Proceedings, vol. 25, Materials Research Forum LLC, 2023, pp. 11–18,
doi:10.21741/9781644902417-2.
short: 'M. Holzmüller, M. Linnemann, W. Homberg, V. Psyk, V. Kräusel, J. Kroos,
in: Materials Research Proceedings, Materials Research Forum LLC, 2023, pp. 11–18.'
conference:
end_date: 2023-04-05
location: Nürnberg
name: 20th International Conference on Sheet Metal 2023
start_date: 2023-04-02
date_created: 2023-03-17T10:23:18Z
date_updated: 2023-05-02T11:40:24Z
department:
- _id: '156'
doi: 10.21741/9781644902417-2
intvolume: ' 25'
keyword:
- Incremental Sheet Forming
- Aluminium
- High-Speed Forming
language:
- iso: eng
page: 11-18
publication: Materials Research Proceedings
publication_identifier:
issn:
- 2474-395X
publication_status: published
publisher: Materials Research Forum LLC
quality_controlled: '1'
status: public
title: Proof of concept for incremental sheet metal forming by means of electromagnetic
and electrohydraulic high-speed forming
type: conference
user_id: '82645'
volume: 25
year: '2023'
...
---
_id: '43045'
abstract:
- lang: eng
text: The pressure fields generated by two simultaneous discharges have
not been investigated on any notable scale for the electrohydraulic impulse forming
method. In this study, the synchronicity of two discharges is ensured by the sequential
connection of two wires mounted in two spark gaps in a common volume of liquid.
The objective is to experimentally confirm the equilibrium of the energies evolved
in two spark gaps by means of pressure measurements. In addition, multipoint membrane
pressure gauges demonstrated the feasibility of easily recording detailed pressure
maps. Based on the membrane deformation mechanism and material strengthening under
static and impulse conditions, the processing procedure is further developed so
as to achieve better accuracy in the determination of pressure field parameters.
The practical equality of the pressure fields on the left and right halves of
the flat-loaded area confirms the equality of energies evolved in the two spark
gaps. The direct shock waves create zones with the most intensive loading. These
results provide a basis for the development of new electrohydraulic technologies
involving the application of two simultaneous discharges with equal energy and
pressure parameters.
article_number: '40'
author:
- first_name: Mykhaylo
full_name: Knyazyev, Mykhaylo
last_name: Knyazyev
- first_name: Maik
full_name: Holzmüller, Maik
id: '82645'
last_name: Holzmüller
- first_name: Werner
full_name: Homberg, Werner
id: '233'
last_name: Homberg
citation:
ama: Knyazyev M, Holzmüller M, Homberg W. Investigation of Pressure Fields Generated
by Two Simultaneous Discharges in Liquid Initiated by Wires. Journal of Manufacturing
and Materials Processing. 2023;7(1). doi:10.3390/jmmp7010040
apa: Knyazyev, M., Holzmüller, M., & Homberg, W. (2023). Investigation of Pressure
Fields Generated by Two Simultaneous Discharges in Liquid Initiated by Wires.
Journal of Manufacturing and Materials Processing, 7(1), Article
40. https://doi.org/10.3390/jmmp7010040
bibtex: '@article{Knyazyev_Holzmüller_Homberg_2023, title={Investigation of Pressure
Fields Generated by Two Simultaneous Discharges in Liquid Initiated by Wires},
volume={7}, DOI={10.3390/jmmp7010040},
number={140}, journal={Journal of Manufacturing and Materials Processing}, publisher={MDPI
AG}, author={Knyazyev, Mykhaylo and Holzmüller, Maik and Homberg, Werner}, year={2023}
}'
chicago: Knyazyev, Mykhaylo, Maik Holzmüller, and Werner Homberg. “Investigation
of Pressure Fields Generated by Two Simultaneous Discharges in Liquid Initiated
by Wires.” Journal of Manufacturing and Materials Processing 7, no. 1 (2023).
https://doi.org/10.3390/jmmp7010040.
ieee: 'M. Knyazyev, M. Holzmüller, and W. Homberg, “Investigation of Pressure Fields
Generated by Two Simultaneous Discharges in Liquid Initiated by Wires,” Journal
of Manufacturing and Materials Processing, vol. 7, no. 1, Art. no. 40, 2023,
doi: 10.3390/jmmp7010040.'
mla: Knyazyev, Mykhaylo, et al. “Investigation of Pressure Fields Generated by Two
Simultaneous Discharges in Liquid Initiated by Wires.” Journal of Manufacturing
and Materials Processing, vol. 7, no. 1, 40, MDPI AG, 2023, doi:10.3390/jmmp7010040.
short: M. Knyazyev, M. Holzmüller, W. Homberg, Journal of Manufacturing and Materials
Processing 7 (2023).
date_created: 2023-03-17T10:31:23Z
date_updated: 2023-05-02T11:40:35Z
department:
- _id: '156'
doi: 10.3390/jmmp7010040
intvolume: ' 7'
issue: '1'
keyword:
- impulse
- forming
- electrohydraulic
- discharge
- wire
- pressure gauge
- pressure field
language:
- iso: eng
publication: Journal of Manufacturing and Materials Processing
publication_identifier:
issn:
- 2504-4494
publication_status: published
publisher: MDPI AG
quality_controlled: '1'
status: public
title: Investigation of Pressure Fields Generated by Two Simultaneous Discharges in
Liquid Initiated by Wires
type: journal_article
user_id: '82645'
volume: 7
year: '2023'
...
---
_id: '44321'
article_type: letter_note
author:
- first_name: Phillip
full_name: Neumann, Phillip
id: '95559'
last_name: Neumann
citation:
ama: Neumann P. Studien zu Schulleistungen und ihre Aufbereitung. Zeitschrift
für Heilpädagogik. 2023;74(5):230-232.
apa: Neumann, P. (2023). Studien zu Schulleistungen und ihre Aufbereitung. Zeitschrift
für Heilpädagogik, 74(5), 230–232.
bibtex: '@article{Neumann_2023, title={Studien zu Schulleistungen und ihre Aufbereitung},
volume={74}, number={5}, journal={Zeitschrift für Heilpädagogik}, author={Neumann,
Phillip}, year={2023}, pages={230–232} }'
chicago: 'Neumann, Phillip. “Studien zu Schulleistungen und ihre Aufbereitung.”
Zeitschrift für Heilpädagogik 74, no. 5 (2023): 230–32.'
ieee: P. Neumann, “Studien zu Schulleistungen und ihre Aufbereitung,” Zeitschrift
für Heilpädagogik, vol. 74, no. 5, pp. 230–232, 2023.
mla: Neumann, Phillip. “Studien zu Schulleistungen und ihre Aufbereitung.” Zeitschrift
für Heilpädagogik, vol. 74, no. 5, 2023, pp. 230–32.
short: P. Neumann, Zeitschrift für Heilpädagogik 74 (2023) 230–232.
date_created: 2023-05-02T12:20:10Z
date_updated: 2023-05-02T12:22:35Z
ddc:
- '370'
department:
- _id: '479'
file:
- access_level: open_access
content_type: application/pdf
creator: pneu
date_created: 2023-05-02T12:19:07Z
date_updated: 2023-05-02T12:22:35Z
file_id: '44322'
file_name: zfh_5.2023_neumann.pdf
file_size: 167638
relation: main_file
file_date_updated: 2023-05-02T12:22:35Z
has_accepted_license: '1'
intvolume: ' 74'
issue: '5'
keyword:
- Inklusion
- Sonderpädagogik
- Bildung
- Bildungsstudien
- Integration
language:
- iso: ger
oa: '1'
page: 230-232
popular_science: '1'
publication: Zeitschrift für Heilpädagogik
publication_identifier:
issn:
- 0513-9066
publication_status: published
status: public
title: Studien zu Schulleistungen und ihre Aufbereitung
type: journal_article
user_id: '95559'
volume: 74
year: '2023'
...
---
_id: '44320'
author:
- first_name: Iman
full_name: Hami Dindar, Iman
id: '54836'
last_name: Hami Dindar
- first_name: Nicole
full_name: Lutters, Nicole
id: '22006'
last_name: Lutters
- first_name: Eugeny
full_name: Kenig, Eugeny
id: '665'
last_name: Kenig
citation:
ama: 'Hami Dindar I, Lutters N, Kenig E. Wässrige Glucosaminlösung als neues Lösungsmittel
zur CO2-Abscheidung . In: Jahrestreffen der ProcessNet-Fachgruppen Fluidverfahrenstechnik
und Adsoprtion.'
apa: Hami Dindar, I., Lutters, N., & Kenig, E. (n.d.). Wässrige Glucosaminlösung
als neues Lösungsmittel zur CO2-Abscheidung . Jahrestreffen der ProcessNet-Fachgruppen
Fluidverfahrenstechnik und Adsoprtion. Jahrestreffen der ProcessNet-Fachgruppen
Fluidverfahrenstechnik und Adsoprtion, Frankfurt am Main.
bibtex: '@inproceedings{Hami Dindar_Lutters_Kenig, place={Frankfurt am Main}, title={Wässrige
Glucosaminlösung als neues Lösungsmittel zur CO2-Abscheidung }, booktitle={Jahrestreffen
der ProcessNet-Fachgruppen Fluidverfahrenstechnik und Adsoprtion}, author={Hami
Dindar, Iman and Lutters, Nicole and Kenig, Eugeny} }'
chicago: Hami Dindar, Iman, Nicole Lutters, and Eugeny Kenig. “Wässrige Glucosaminlösung
als neues Lösungsmittel zur CO2-Abscheidung .” In Jahrestreffen der ProcessNet-Fachgruppen
Fluidverfahrenstechnik und Adsoprtion. Frankfurt am Main, n.d.
ieee: I. Hami Dindar, N. Lutters, and E. Kenig, “Wässrige Glucosaminlösung als neues
Lösungsmittel zur CO2-Abscheidung ,” presented at the Jahrestreffen der ProcessNet-Fachgruppen
Fluidverfahrenstechnik und Adsoprtion, Frankfurt am Main.
mla: Hami Dindar, Iman, et al. “Wässrige Glucosaminlösung als neues Lösungsmittel
zur CO2-Abscheidung .” Jahrestreffen der ProcessNet-Fachgruppen Fluidverfahrenstechnik
und Adsoprtion.
short: 'I. Hami Dindar, N. Lutters, E. Kenig, in: Jahrestreffen der ProcessNet-Fachgruppen
Fluidverfahrenstechnik und Adsoprtion, Frankfurt am Main, n.d.'
conference:
end_date: 2023-03-23
location: Frankfurt am Main
name: Jahrestreffen der ProcessNet-Fachgruppen Fluidverfahrenstechnik und Adsoprtion
start_date: 2023-03-21
date_created: 2023-05-02T11:31:25Z
date_updated: 2023-05-02T11:40:19Z
department:
- _id: '9'
- _id: '145'
language:
- iso: ger
place: Frankfurt am Main
publication: Jahrestreffen der ProcessNet-Fachgruppen Fluidverfahrenstechnik und Adsoprtion
publication_status: draft
status: public
title: 'Wässrige Glucosaminlösung als neues Lösungsmittel zur CO2-Abscheidung '
type: conference
user_id: '54836'
year: '2023'
...
---
_id: '40981'
abstract:
- lang: eng
text: Room temperature sodium-sulfur (RT Na-S) batteries are considered potential
candidates for stationary power storage applications due to their low cost, broad
active material availability and low toxicity. Challenges, such as high volume
expansion of the S-cathode upon discharge, low electronic conductivity of S as
active material and herewith limited rate capability as well as the shuttling
of polysulfides (PSs) as intermediates often impede the cycle stability and practical
application of Na-S batteries. Sulfurized poly(acrylonitrile) (SPAN) inherently
inhibits the shuttling of PSs and shows compatibility with carbonate-based electrolytes,
however, its exact redox mechanism remained unclear to date. Herein, we implement
a commercially available and simple electrolyte into the Na-SPAN cell chemistry
and demonstrate its high rate and cycle stability. Through the application of
in situ techniques utilizing electronic impedance spectroscopy (EIS) and X-ray
absorption spectroscopy (XAS) at different depths of charge and discharge, an
insight into SPAN’s redox chemistry is obtained.
article_number: '010526'
author:
- first_name: Julian
full_name: Kappler, Julian
last_name: Kappler
- first_name: Güldeniz
full_name: Tonbul, Güldeniz
id: '89054'
last_name: Tonbul
orcid: 0000-0002-0999-9995
- first_name: Roland
full_name: Schoch, Roland
id: '48467'
last_name: Schoch
orcid: 0000-0003-2061-7289
- first_name: Saravanakumar
full_name: Murugan, Saravanakumar
last_name: Murugan
- first_name: Michał
full_name: Nowakowski, Michał
id: '78878'
last_name: Nowakowski
orcid: 0000-0002-3734-7011
- first_name: Pia Lena
full_name: Lange, Pia Lena
last_name: Lange
- first_name: Sina Vanessa
full_name: Klostermann, Sina Vanessa
last_name: Klostermann
- first_name: Matthias
full_name: Bauer, Matthias
id: '47241'
last_name: Bauer
orcid: 0000-0002-9294-6076
- first_name: Thomas
full_name: Schleid, Thomas
last_name: Schleid
- first_name: Johannes
full_name: Kästner, Johannes
last_name: Kästner
- first_name: Michael Rudolf
full_name: Buchmeiser, Michael Rudolf
last_name: Buchmeiser
citation:
ama: Kappler J, Tonbul G, Schoch R, et al. Understanding the Redox Mechanism of
Sulfurized Poly(acrylonitrile) as Highly Rate and Cycle Stable Cathode Material
for Sodium-Sulfur Batteries. Journal of The Electrochemical Society. 2023;170(1).
doi:10.1149/1945-7111/acb2fa
apa: Kappler, J., Tonbul, G., Schoch, R., Murugan, S., Nowakowski, M., Lange, P.
L., Klostermann, S. V., Bauer, M., Schleid, T., Kästner, J., & Buchmeiser,
M. R. (2023). Understanding the Redox Mechanism of Sulfurized Poly(acrylonitrile)
as Highly Rate and Cycle Stable Cathode Material for Sodium-Sulfur Batteries.
Journal of The Electrochemical Society, 170(1), Article 010526.
https://doi.org/10.1149/1945-7111/acb2fa
bibtex: '@article{Kappler_Tonbul_Schoch_Murugan_Nowakowski_Lange_Klostermann_Bauer_Schleid_Kästner_et
al._2023, title={Understanding the Redox Mechanism of Sulfurized Poly(acrylonitrile)
as Highly Rate and Cycle Stable Cathode Material for Sodium-Sulfur Batteries},
volume={170}, DOI={10.1149/1945-7111/acb2fa},
number={1010526}, journal={Journal of The Electrochemical Society}, publisher={The
Electrochemical Society}, author={Kappler, Julian and Tonbul, Güldeniz and Schoch,
Roland and Murugan, Saravanakumar and Nowakowski, Michał and Lange, Pia Lena and
Klostermann, Sina Vanessa and Bauer, Matthias and Schleid, Thomas and Kästner,
Johannes and et al.}, year={2023} }'
chicago: Kappler, Julian, Güldeniz Tonbul, Roland Schoch, Saravanakumar Murugan,
Michał Nowakowski, Pia Lena Lange, Sina Vanessa Klostermann, et al. “Understanding
the Redox Mechanism of Sulfurized Poly(Acrylonitrile) as Highly Rate and Cycle
Stable Cathode Material for Sodium-Sulfur Batteries.” Journal of The Electrochemical
Society 170, no. 1 (2023). https://doi.org/10.1149/1945-7111/acb2fa.
ieee: 'J. Kappler et al., “Understanding the Redox Mechanism of Sulfurized
Poly(acrylonitrile) as Highly Rate and Cycle Stable Cathode Material for Sodium-Sulfur
Batteries,” Journal of The Electrochemical Society, vol. 170, no. 1, Art.
no. 010526, 2023, doi: 10.1149/1945-7111/acb2fa.'
mla: Kappler, Julian, et al. “Understanding the Redox Mechanism of Sulfurized Poly(Acrylonitrile)
as Highly Rate and Cycle Stable Cathode Material for Sodium-Sulfur Batteries.”
Journal of The Electrochemical Society, vol. 170, no. 1, 010526, The Electrochemical
Society, 2023, doi:10.1149/1945-7111/acb2fa.
short: J. Kappler, G. Tonbul, R. Schoch, S. Murugan, M. Nowakowski, P.L. Lange,
S.V. Klostermann, M. Bauer, T. Schleid, J. Kästner, M.R. Buchmeiser, Journal of
The Electrochemical Society 170 (2023).
date_created: 2023-01-30T16:08:15Z
date_updated: 2023-05-03T08:27:13Z
department:
- _id: '35'
- _id: '306'
doi: 10.1149/1945-7111/acb2fa
intvolume: ' 170'
issue: '1'
keyword:
- Materials Chemistry
- Electrochemistry
- Surfaces
- Coatings and Films
- Condensed Matter Physics
- Renewable Energy
- Sustainability and the Environment
- Electronic
- Optical and Magnetic Materials
language:
- iso: eng
publication: Journal of The Electrochemical Society
publication_identifier:
issn:
- 0013-4651
- 1945-7111
publication_status: published
publisher: The Electrochemical Society
status: public
title: Understanding the Redox Mechanism of Sulfurized Poly(acrylonitrile) as Highly
Rate and Cycle Stable Cathode Material for Sodium-Sulfur Batteries
type: journal_article
user_id: '89054'
volume: 170
year: '2023'
...
---
_id: '44382'
abstract:
- lang: eng
text: 'The success of engineering complex technical systems is determined
by meeting customer requirements and institutional regulations. One example relevant
to the automobile industry is the United Nations Economic Commission of Europe
(UN ECE), which specifies the homologation of automobile series and requires proof
of traceability. The required traceability can be achieved by modeling system
artifacts and their relations in a consistent, seamless model—an effect-chain
model. Currently, no in-depth methodology exists to support engineers in developing
certification-compliant effect-chain models. For this purpose, a new methodology
for certification-compliant effect-chain modeling was developed, which includes
extensions of an existing method, suitable models, and tools to support engineers
in the modeling process. For evaluation purposes, applicability is proven based
on the experience of more than 300 workshops at an automotive OEM and an automotive
supplier. The following case example is chosen to demonstrate applicability: the
development of a window lifter that has to meet the demands of UN ECE Regulations
R156 and R21. Results indicate multiple benefits in supporting engineers with
the certification-compliant modeling of effect chains. Three benefits are goal-oriented
modeling to reduce the necessary modeling capacity, increasing model quality by
applying information quality criteria, and the potential to reduce costs through
automatable effect-chain analyses for technical changes. Further, companies in
the automotive and other industries will benefit from increased modeling capabilities
that can be used for architecture modeling and to comply with other regulations
such as ASPICE or ISO 26262.'
article_number: '154'
author:
- first_name: Iris
full_name: Gräßler, Iris
id: '47565'
last_name: Gräßler
orcid: 0000-0001-5765-971X
- first_name: Dominik
full_name: Wiechel, Dominik
id: '67161'
last_name: Wiechel
- first_name: Anna-Sophie
full_name: Koch, Anna-Sophie
id: '44158'
last_name: Koch
- first_name: Tim
full_name: Sturm, Tim
last_name: Sturm
- first_name: Thomas
full_name: Markfelder, Thomas
last_name: Markfelder
citation:
ama: Gräßler I, Wiechel D, Koch A-S, Sturm T, Markfelder T. Methodology for Certification-Compliant
Effect-Chain Modeling. Systems. 2023;11(3). doi:10.3390/systems11030154
apa: Gräßler, I., Wiechel, D., Koch, A.-S., Sturm, T., & Markfelder, T. (2023).
Methodology for Certification-Compliant Effect-Chain Modeling. Systems,
11(3), Article 154. https://doi.org/10.3390/systems11030154
bibtex: '@article{Gräßler_Wiechel_Koch_Sturm_Markfelder_2023, title={Methodology
for Certification-Compliant Effect-Chain Modeling}, volume={11}, DOI={10.3390/systems11030154},
number={3154}, journal={Systems}, publisher={MDPI AG}, author={Gräßler, Iris and
Wiechel, Dominik and Koch, Anna-Sophie and Sturm, Tim and Markfelder, Thomas},
year={2023} }'
chicago: Gräßler, Iris, Dominik Wiechel, Anna-Sophie Koch, Tim Sturm, and Thomas
Markfelder. “Methodology for Certification-Compliant Effect-Chain Modeling.” Systems
11, no. 3 (2023). https://doi.org/10.3390/systems11030154.
ieee: 'I. Gräßler, D. Wiechel, A.-S. Koch, T. Sturm, and T. Markfelder, “Methodology
for Certification-Compliant Effect-Chain Modeling,” Systems, vol. 11, no.
3, Art. no. 154, 2023, doi: 10.3390/systems11030154.'
mla: Gräßler, Iris, et al. “Methodology for Certification-Compliant Effect-Chain
Modeling.” Systems, vol. 11, no. 3, 154, MDPI AG, 2023, doi:10.3390/systems11030154.
short: I. Gräßler, D. Wiechel, A.-S. Koch, T. Sturm, T. Markfelder, Systems 11 (2023).
date_created: 2023-05-03T08:37:36Z
date_updated: 2023-05-03T08:40:22Z
department:
- _id: '152'
doi: 10.3390/systems11030154
intvolume: ' 11'
issue: '3'
keyword:
- Information Systems and Management
- Computer Networks and Communications
- Modeling and Simulation
- Control and Systems Engineering
- Software
language:
- iso: eng
publication: Systems
publication_identifier:
issn:
- 2079-8954
publication_status: published
publisher: MDPI AG
quality_controlled: '1'
status: public
title: Methodology for Certification-Compliant Effect-Chain Modeling
type: journal_article
user_id: '5905'
volume: 11
year: '2023'
...
---
_id: '44380'
author:
- first_name: Güldeniz
full_name: Tonbul, Güldeniz
id: '89054'
last_name: Tonbul
orcid: 0000-0002-0999-9995
- first_name: 'Julian '
full_name: 'Kappler, Julian '
last_name: Kappler
- first_name: 'Saravanakumar '
full_name: 'Murugan, Saravanakumar '
last_name: Murugan
- first_name: 'Roland '
full_name: 'Schoch, Roland '
last_name: Schoch
- first_name: 'Michal '
full_name: 'Nowakowski, Michal '
last_name: Nowakowski
- first_name: Pia
full_name: Lange, Pia
last_name: Lange
- first_name: 'Matthias '
full_name: 'Bauer, Matthias '
last_name: Bauer
- first_name: Michael R.
full_name: Buchmeiser, Michael R.
last_name: Buchmeiser
citation:
ama: 'Tonbul G, Kappler J, Murugan S, et al. Characterization of Na-S Battery System
Using X-ray Absorption Spectroscopy. In: ; 2023.'
apa: Tonbul, G., Kappler, J., Murugan, S., Schoch, R., Nowakowski, M., Lange, P.,
Bauer, M., & Buchmeiser, M. R. (2023). Characterization of Na-S Battery
System Using X-ray Absorption Spectroscopy. Advanced Battery Power – Kraftwerk
Batterie 2023, Aachen.
bibtex: '@inproceedings{Tonbul_Kappler_Murugan_Schoch_Nowakowski_Lange_Bauer_Buchmeiser_2023,
place={Aachen}, title={Characterization of Na-S Battery System Using X-ray Absorption
Spectroscopy}, author={Tonbul, Güldeniz and Kappler, Julian and Murugan, Saravanakumar and
Schoch, Roland and Nowakowski, Michal and Lange, Pia and Bauer, Matthias and
Buchmeiser, Michael R.}, year={2023} }'
chicago: Tonbul, Güldeniz, Julian Kappler, Saravanakumar Murugan, Roland Schoch,
Michal Nowakowski, Pia Lange, Matthias Bauer, and Michael R. Buchmeiser. “Characterization
of Na-S Battery System Using X-Ray Absorption Spectroscopy.” Aachen, 2023.
ieee: G. Tonbul et al., “Characterization of Na-S Battery System Using X-ray
Absorption Spectroscopy,” presented at the Advanced Battery Power – Kraftwerk
Batterie 2023, Aachen, 2023.
mla: Tonbul, Güldeniz, et al. Characterization of Na-S Battery System Using X-Ray
Absorption Spectroscopy. 2023.
short: 'G. Tonbul, J. Kappler, S. Murugan, R. Schoch, M. Nowakowski, P. Lange, M.
Bauer, M.R. Buchmeiser, in: Aachen, 2023.'
conference:
end_date: 2023-04-28
location: Aachen
name: Advanced Battery Power – Kraftwerk Batterie 2023
start_date: 2023-04-27
date_created: 2023-05-03T08:31:08Z
date_updated: 2023-05-03T08:59:18Z
department:
- _id: '306'
language:
- iso: eng
place: Aachen
status: public
title: Characterization of Na-S Battery System Using X-ray Absorption Spectroscopy
type: conference_abstract
user_id: '89054'
year: '2023'
...
---
_id: '44390'
abstract:
- lang: eng
text: The development of autonomous vehicles and their introduction in urban traffic
offer many opportunities for traffic improvements. In this paper, an approach
for a future traffic control system for mixed autonomy traffic environments is
presented. Furthermore, a simulation framework based on the city of Paderborn
is introduced to enable the development and examination of such a system. This
encompasses multiple elements including the road network itself, traffic lights,
sensors as well as methods to analyse the topology of the network. Furthermore,
a procedure for traffic demand generation and routing is presented based on statistical
data of the city and traffic data obtained by measurements. The resulting model
can receive and apply the generated control inputs and in turn generates simulated
sensor data for the control system based on the current system state.
author:
- first_name: Christopher
full_name: Link, Christopher
id: '38249'
last_name: Link
- first_name: Kevin
full_name: Malena, Kevin
id: '36303'
last_name: Malena
orcid: 0000-0003-1183-4679
- first_name: Sandra
full_name: Gausemeier, Sandra
id: '17793'
last_name: Gausemeier
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: 'Link C, Malena K, Gausemeier S, Trächtler A. Simulation Environment for Traffic
Control Systems Targeting Mixed Autonomy Traffic Scenarios. In: Proceedings
of the 9th International Conference on Vehicle Technology and Intelligent Transport
Systems. SCITEPRESS - Science and Technology Publications; 2023. doi:10.5220/0011987600003479'
apa: Link, C., Malena, K., Gausemeier, S., & Trächtler, A. (2023). Simulation
Environment for Traffic Control Systems Targeting Mixed Autonomy Traffic Scenarios.
Proceedings of the 9th International Conference on Vehicle Technology and Intelligent
Transport Systems. 9th International Conference on Vehicle Technology and
Intelligent Transport Systems (VEHITS 2023), Prague, Czech Republic. https://doi.org/10.5220/0011987600003479
bibtex: '@inproceedings{Link_Malena_Gausemeier_Trächtler_2023, title={Simulation
Environment for Traffic Control Systems Targeting Mixed Autonomy Traffic Scenarios},
DOI={10.5220/0011987600003479},
booktitle={Proceedings of the 9th International Conference on Vehicle Technology
and Intelligent Transport Systems}, publisher={SCITEPRESS - Science and Technology
Publications}, author={Link, Christopher and Malena, Kevin and Gausemeier, Sandra
and Trächtler, Ansgar}, year={2023} }'
chicago: Link, Christopher, Kevin Malena, Sandra Gausemeier, and Ansgar Trächtler.
“Simulation Environment for Traffic Control Systems Targeting Mixed Autonomy Traffic
Scenarios.” In Proceedings of the 9th International Conference on Vehicle Technology
and Intelligent Transport Systems. SCITEPRESS - Science and Technology Publications,
2023. https://doi.org/10.5220/0011987600003479.
ieee: 'C. Link, K. Malena, S. Gausemeier, and A. Trächtler, “Simulation Environment
for Traffic Control Systems Targeting Mixed Autonomy Traffic Scenarios,” presented
at the 9th International Conference on Vehicle Technology and Intelligent Transport
Systems (VEHITS 2023), Prague, Czech Republic, 2023, doi: 10.5220/0011987600003479.'
mla: Link, Christopher, et al. “Simulation Environment for Traffic Control Systems
Targeting Mixed Autonomy Traffic Scenarios.” Proceedings of the 9th International
Conference on Vehicle Technology and Intelligent Transport Systems, SCITEPRESS
- Science and Technology Publications, 2023, doi:10.5220/0011987600003479.
short: 'C. Link, K. Malena, S. Gausemeier, A. Trächtler, in: Proceedings of the
9th International Conference on Vehicle Technology and Intelligent Transport Systems,
SCITEPRESS - Science and Technology Publications, 2023.'
conference:
end_date: 2023-04-28
location: Prague, Czech Republic
name: 9th International Conference on Vehicle Technology and Intelligent Transport
Systems (VEHITS 2023)
start_date: 2023-04-26
date_created: 2023-05-03T08:57:10Z
date_updated: 2023-05-03T09:15:19Z
department:
- _id: '153'
doi: 10.5220/0011987600003479
keyword:
- Traffic Simulation
- Traffic Control
- Car2X
- Mixed Autonomy
- Autonomous Vehicles
- SUMO
- Sensor Simulation
- Traffic Demand Generation
- Routing
- Traffic Lights
- Graph Analysis
- Traffic Observer
language:
- iso: eng
main_file_link:
- url: https://www.scitepress.org/Link.aspx?doi=10.5220/0011987600003479
publication: Proceedings of the 9th International Conference on Vehicle Technology
and Intelligent Transport Systems
publication_identifier:
isbn:
- 978-989-758-652-1
publication_status: published
publisher: SCITEPRESS - Science and Technology Publications
quality_controlled: '1'
status: public
title: Simulation Environment for Traffic Control Systems Targeting Mixed Autonomy
Traffic Scenarios
type: conference
user_id: '38249'
year: '2023'
...
---
_id: '44444'
author:
- first_name: Maike
full_name: Althaus, Maike
id: '61896'
last_name: Althaus
- first_name: Michelle
full_name: Müller, Michelle
id: '50286'
last_name: Müller
- first_name: Christian
full_name: Vorbohle, Christian
id: '29951'
last_name: Vorbohle
- first_name: Dennis
full_name: Kundisch, Dennis
id: '21117'
last_name: Kundisch
citation:
ama: 'Althaus M, Müller M, Vorbohle C, Kundisch D. Business Models for Cultural
Event Platforms – A Taxonomy Approach. In: Proceedings of the International
Conference on Challenges in Managing Smart Products and Services (CHIMSPAS 2023).
; 2023.'
apa: Althaus, M., Müller, M., Vorbohle, C., & Kundisch, D. (2023). Business
Models for Cultural Event Platforms – A Taxonomy Approach. Proceedings of
the International Conference on Challenges in Managing Smart Products and Services
(CHIMSPAS 2023). International Conference on Challenges in Managing Smart
Products and Services (CHIMSPAS 2023), Bielefeld.
bibtex: '@inproceedings{Althaus_Müller_Vorbohle_Kundisch_2023, title={Business Models
for Cultural Event Platforms – A Taxonomy Approach}, booktitle={Proceedings
of the International Conference on Challenges in Managing Smart Products and Services
(CHIMSPAS 2023)}, author={Althaus, Maike and Müller, Michelle and Vorbohle, Christian
and Kundisch, Dennis}, year={2023} }'
chicago: Althaus, Maike, Michelle Müller, Christian Vorbohle, and Dennis Kundisch.
“Business Models for Cultural Event Platforms – A Taxonomy Approach.” In Proceedings
of the International Conference on Challenges in Managing Smart Products and Services
(CHIMSPAS 2023), 2023.
ieee: M. Althaus, M. Müller, C. Vorbohle, and D. Kundisch, “Business Models for
Cultural Event Platforms – A Taxonomy Approach,” presented at the International
Conference on Challenges in Managing Smart Products and Services (CHIMSPAS 2023),
Bielefeld, 2023.
mla: Althaus, Maike, et al. “Business Models for Cultural Event Platforms – A
Taxonomy Approach.” Proceedings of the International Conference on Challenges
in Managing Smart Products and Services (CHIMSPAS 2023), 2023.
short: 'M. Althaus, M. Müller, C. Vorbohle, D. Kundisch, in: Proceedings of the
International Conference on Challenges in Managing Smart Products and Services
(CHIMSPAS 2023), 2023.'
conference:
location: Bielefeld
name: International Conference on Challenges in Managing Smart Products and Services
(CHIMSPAS 2023)
date_created: 2023-05-03T13:36:08Z
date_updated: 2023-05-03T13:36:24Z
department:
- _id: '276'
language:
- iso: eng
publication: Proceedings of the International Conference on Challenges in Managing
Smart Products and Services (CHIMSPAS 2023)
status: public
title: Business Models for Cultural Event Platforms – A Taxonomy Approach
type: conference
user_id: '16205'
year: '2023'
...
---
_id: '44053'
author:
- first_name: Florian
full_name: Laux, Florian
id: '50293'
last_name: Laux
- first_name: Martin
full_name: Poniatowski, Martin
id: '32441'
last_name: Poniatowski
- first_name: Dennis
full_name: Kundisch, Dennis
id: '21117'
last_name: Kundisch
citation:
ama: 'Laux F, Poniatowski M, Kundisch D. May I have your Attention, please? – The
Interaction between Attention Screening and Reputation on Crowdworking Platforms.
In: Proceedings of the 31st European Conference on Information Systems (ECIS).'
apa: Laux, F., Poniatowski, M., & Kundisch, D. (n.d.). May I have your Attention,
please? – The Interaction between Attention Screening and Reputation on Crowdworking
Platforms. Proceedings of the 31st European Conference on Information Systems
(ECIS). 31st European Conference on Information Systems (ECIS), Kristiansand,
Norway.
bibtex: '@inproceedings{Laux_Poniatowski_Kundisch, title={May I have your Attention,
please? – The Interaction between Attention Screening and Reputation on Crowdworking
Platforms}, booktitle={Proceedings of the 31st European Conference on Information
Systems (ECIS)}, author={Laux, Florian and Poniatowski, Martin and Kundisch, Dennis}
}'
chicago: Laux, Florian, Martin Poniatowski, and Dennis Kundisch. “May I Have Your
Attention, Please? – The Interaction between Attention Screening and Reputation
on Crowdworking Platforms.” In Proceedings of the 31st European Conference
on Information Systems (ECIS), n.d.
ieee: F. Laux, M. Poniatowski, and D. Kundisch, “May I have your Attention, please?
– The Interaction between Attention Screening and Reputation on Crowdworking Platforms,”
presented at the 31st European Conference on Information Systems (ECIS), Kristiansand,
Norway.
mla: Laux, Florian, et al. “May I Have Your Attention, Please? – The Interaction
between Attention Screening and Reputation on Crowdworking Platforms.” Proceedings
of the 31st European Conference on Information Systems (ECIS).
short: 'F. Laux, M. Poniatowski, D. Kundisch, in: Proceedings of the 31st European
Conference on Information Systems (ECIS), n.d.'
conference:
location: Kristiansand, Norway
name: 31st European Conference on Information Systems (ECIS)
date_created: 2023-04-18T10:11:48Z
date_updated: 2023-05-03T13:36:21Z
department:
- _id: '276'
language:
- iso: eng
publication: Proceedings of the 31st European Conference on Information Systems (ECIS)
publication_status: accepted
status: public
title: May I have your Attention, please? – The Interaction between Attention Screening
and Reputation on Crowdworking Platforms
type: conference
user_id: '16205'
year: '2023'
...
---
_id: '44103'
author:
- first_name: Moritz
full_name: Neukötter, Moritz
id: '45530'
last_name: Neukötter
orcid: 0000-0001-9101-8828
- first_name: Steffen
full_name: Jesinghausen, Steffen
id: '3959'
last_name: Jesinghausen
orcid: https://orcid.org/0000-0003-2611-5298
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
orcid: 000-0001-8590-1921
citation:
ama: 'Neukötter M, Jesinghausen S, Schmid H-J. Particles as Seeds for Instabilities
in Uniaxially Elongated Polymer Suspension Filaments (Presentation). In: ; 2023.'
apa: Neukötter, M., Jesinghausen, S., & Schmid, H.-J. (2023). Particles as
Seeds for Instabilities in Uniaxially Elongated Polymer Suspension Filaments (Presentation).
Annual Meeting of the German Rheological Society (DRG) , Berlin.
bibtex: '@inproceedings{Neukötter_Jesinghausen_Schmid_2023, title={Particles as
Seeds for Instabilities in Uniaxially Elongated Polymer Suspension Filaments (Presentation)},
author={Neukötter, Moritz and Jesinghausen, Steffen and Schmid, Hans-Joachim},
year={2023} }'
chicago: Neukötter, Moritz, Steffen Jesinghausen, and Hans-Joachim Schmid. “Particles
as Seeds for Instabilities in Uniaxially Elongated Polymer Suspension Filaments
(Presentation),” 2023.
ieee: M. Neukötter, S. Jesinghausen, and H.-J. Schmid, “Particles as Seeds for Instabilities
in Uniaxially Elongated Polymer Suspension Filaments (Presentation),” presented
at the Annual Meeting of the German Rheological Society (DRG) , Berlin, 2023.
mla: Neukötter, Moritz, et al. Particles as Seeds for Instabilities in Uniaxially
Elongated Polymer Suspension Filaments (Presentation). 2023.
short: 'M. Neukötter, S. Jesinghausen, H.-J. Schmid, in: 2023.'
conference:
end_date: 2023-09-22
location: Berlin
name: 'Annual Meeting of the German Rheological Society (DRG) '
start_date: 2023-09-21
date_created: 2023-04-21T11:24:21Z
date_updated: 2023-05-04T08:20:27Z
department:
- _id: '9'
- _id: '150'
language:
- iso: eng
status: public
title: Particles as Seeds for Instabilities in Uniaxially Elongated Polymer Suspension
Filaments (Presentation)
type: conference_abstract
user_id: '3959'
year: '2023'
...
---
_id: '44477'
author:
- first_name: Christine
full_name: Küster, Christine
last_name: Küster
- first_name: Nina
full_name: Klünder, Nina
id: '91015'
last_name: Klünder
- first_name: Inga
full_name: Wagenknecht, Inga
id: '98804'
last_name: Wagenknecht
citation:
ama: Küster C, Klünder N, Wagenknecht I. Haushaltswissenschaft – Eine Diskussionsgrundlage.
Hauswirtschaft und Wissenschaft. 2023;71:1-12. doi: 10.23782/HUW_09_2023
apa: Küster, C., Klünder, N., & Wagenknecht, I. (2023). Haushaltswissenschaft
– Eine Diskussionsgrundlage. Hauswirtschaft und Wissenschaft, 71,
1–12. https://doi.org/ 10.23782/HUW_09_2023
bibtex: '@article{Küster_Klünder_Wagenknecht_2023, title={Haushaltswissenschaft
– Eine Diskussionsgrundlage}, volume={71}, DOI={
10.23782/HUW_09_2023}, journal={Hauswirtschaft und Wissenschaft}, publisher={Deutsche
Gesellschaft für Hauswirtschaft e.V.}, author={Küster, Christine and Klünder,
Nina and Wagenknecht, Inga}, year={2023}, pages={1–12} }'
chicago: 'Küster, Christine, Nina Klünder, and Inga Wagenknecht. “Haushaltswissenschaft
– Eine Diskussionsgrundlage.” Hauswirtschaft und Wissenschaft 71 (2023):
1–12. https://doi.org/ 10.23782/HUW_09_2023.'
ieee: 'C. Küster, N. Klünder, and I. Wagenknecht, “Haushaltswissenschaft – Eine
Diskussionsgrundlage,” Hauswirtschaft und Wissenschaft, vol. 71, pp. 1–12,
2023, doi: 10.23782/HUW_09_2023.'
mla: Küster, Christine, et al. “Haushaltswissenschaft – Eine Diskussionsgrundlage.”
Hauswirtschaft und Wissenschaft, vol. 71, Deutsche Gesellschaft für Hauswirtschaft
e.V., 2023, pp. 1–12, doi: 10.23782/HUW_09_2023.
short: C. Küster, N. Klünder, I. Wagenknecht, Hauswirtschaft und Wissenschaft 71
(2023) 1–12.
date_created: 2023-05-04T09:30:00Z
date_updated: 2023-05-04T09:31:09Z
department:
- _id: '22'
- _id: '43'
doi: ' 10.23782/HUW_09_2023'
intvolume: ' 71'
language:
- iso: ger
page: 1-12
publication: Hauswirtschaft und Wissenschaft
publication_identifier:
issn:
- 2626-0913
publication_status: published
publisher: Deutsche Gesellschaft für Hauswirtschaft e.V.
status: public
title: Haushaltswissenschaft – Eine Diskussionsgrundlage
type: journal_article
user_id: '50419'
volume: 71
year: '2023'
...
---
_id: '20841'
author:
- first_name: Sevag
full_name: Gharibian, Sevag
id: '71541'
last_name: Gharibian
orcid: 0000-0002-9992-3379
- first_name: James
full_name: Watson, James
last_name: Watson
- first_name: Johannes
full_name: Bausch, Johannes
last_name: Bausch
citation:
ama: 'Gharibian S, Watson J, Bausch J. The Complexity of Translationally Invariant
Problems beyond Ground State Energies. In: Proceedings of the 40th International
Symposium on Theoretical Aspects of Computer Science (STACS). Vol 254. ; 2023:54:1-54:21.
doi:https://doi.org/10.4230/LIPIcs.STACS.2023.54'
apa: Gharibian, S., Watson, J., & Bausch, J. (2023). The Complexity of Translationally
Invariant Problems beyond Ground State Energies. Proceedings of the 40th International
Symposium on Theoretical Aspects of Computer Science (STACS), 254,
54:1-54:21. https://doi.org/10.4230/LIPIcs.STACS.2023.54
bibtex: '@inproceedings{Gharibian_Watson_Bausch_2023, title={The Complexity of Translationally
Invariant Problems beyond Ground State Energies}, volume={254}, DOI={https://doi.org/10.4230/LIPIcs.STACS.2023.54},
booktitle={Proceedings of the 40th International Symposium on Theoretical Aspects
of Computer Science (STACS)}, author={Gharibian, Sevag and Watson, James and Bausch,
Johannes}, year={2023}, pages={54:1-54:21} }'
chicago: Gharibian, Sevag, James Watson, and Johannes Bausch. “The Complexity of
Translationally Invariant Problems beyond Ground State Energies.” In Proceedings
of the 40th International Symposium on Theoretical Aspects of Computer Science
(STACS), 254:54:1-54:21, 2023. https://doi.org/10.4230/LIPIcs.STACS.2023.54.
ieee: 'S. Gharibian, J. Watson, and J. Bausch, “The Complexity of Translationally
Invariant Problems beyond Ground State Energies,” in Proceedings of the 40th
International Symposium on Theoretical Aspects of Computer Science (STACS),
2023, vol. 254, p. 54:1-54:21, doi: https://doi.org/10.4230/LIPIcs.STACS.2023.54.'
mla: Gharibian, Sevag, et al. “The Complexity of Translationally Invariant Problems
beyond Ground State Energies.” Proceedings of the 40th International Symposium
on Theoretical Aspects of Computer Science (STACS), vol. 254, 2023, p. 54:1-54:21,
doi:https://doi.org/10.4230/LIPIcs.STACS.2023.54.
short: 'S. Gharibian, J. Watson, J. Bausch, in: Proceedings of the 40th International
Symposium on Theoretical Aspects of Computer Science (STACS), 2023, p. 54:1-54:21.'
date_created: 2020-12-24T14:15:09Z
date_updated: 2023-05-04T17:51:23Z
department:
- _id: '623'
- _id: '7'
doi: https://doi.org/10.4230/LIPIcs.STACS.2023.54
external_id:
arxiv:
- '2012.12717'
intvolume: ' 254'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://arxiv.org/abs/2012.12717
oa: '1'
page: 54:1-54:21
publication: Proceedings of the 40th International Symposium on Theoretical Aspects
of Computer Science (STACS)
publication_status: published
status: public
title: The Complexity of Translationally Invariant Problems beyond Ground State Energies
type: conference
user_id: '71541'
volume: 254
year: '2023'
...
---
_id: '42517'
author:
- first_name: Kosti
full_name: Tapio, Kosti
last_name: Tapio
- first_name: Charlotte
full_name: Kielar, Charlotte
last_name: Kielar
- first_name: Johannes M.
full_name: Parikka, Johannes M.
last_name: Parikka
- first_name: Adrian
full_name: Keller, Adrian
id: '48864'
last_name: Keller
orcid: 0000-0001-7139-3110
- first_name: Heini
full_name: Järvinen, Heini
last_name: Järvinen
- first_name: Karim
full_name: Fahmy, Karim
last_name: Fahmy
- first_name: J. Jussi
full_name: Toppari, J. Jussi
last_name: Toppari
citation:
ama: Tapio K, Kielar C, Parikka JM, et al. Large-Scale Formation of DNA Origami
Lattices on Silicon. Chemistry of Materials. 2023;35:1961–1971. doi:10.1021/acs.chemmater.2c03190
apa: Tapio, K., Kielar, C., Parikka, J. M., Keller, A., Järvinen, H., Fahmy, K.,
& Toppari, J. J. (2023). Large-Scale Formation of DNA Origami Lattices on
Silicon. Chemistry of Materials, 35, 1961–1971. https://doi.org/10.1021/acs.chemmater.2c03190
bibtex: '@article{Tapio_Kielar_Parikka_Keller_Järvinen_Fahmy_Toppari_2023, title={Large-Scale
Formation of DNA Origami Lattices on Silicon}, volume={35}, DOI={10.1021/acs.chemmater.2c03190},
journal={Chemistry of Materials}, publisher={American Chemical Society (ACS)},
author={Tapio, Kosti and Kielar, Charlotte and Parikka, Johannes M. and Keller,
Adrian and Järvinen, Heini and Fahmy, Karim and Toppari, J. Jussi}, year={2023},
pages={1961–1971} }'
chicago: 'Tapio, Kosti, Charlotte Kielar, Johannes M. Parikka, Adrian Keller, Heini
Järvinen, Karim Fahmy, and J. Jussi Toppari. “Large-Scale Formation of DNA Origami
Lattices on Silicon.” Chemistry of Materials 35 (2023): 1961–1971. https://doi.org/10.1021/acs.chemmater.2c03190.'
ieee: 'K. Tapio et al., “Large-Scale Formation of DNA Origami Lattices on
Silicon,” Chemistry of Materials, vol. 35, pp. 1961–1971, 2023, doi: 10.1021/acs.chemmater.2c03190.'
mla: Tapio, Kosti, et al. “Large-Scale Formation of DNA Origami Lattices on Silicon.”
Chemistry of Materials, vol. 35, American Chemical Society (ACS), 2023,
pp. 1961–1971, doi:10.1021/acs.chemmater.2c03190.
short: K. Tapio, C. Kielar, J.M. Parikka, A. Keller, H. Järvinen, K. Fahmy, J.J.
Toppari, Chemistry of Materials 35 (2023) 1961–1971.
date_created: 2023-02-27T07:42:33Z
date_updated: 2023-05-05T10:50:56Z
department:
- _id: '302'
doi: 10.1021/acs.chemmater.2c03190
intvolume: ' 35'
keyword:
- Materials Chemistry
- General Chemical Engineering
- General Chemistry
language:
- iso: eng
page: 1961–1971
publication: Chemistry of Materials
publication_identifier:
issn:
- 0897-4756
- 1520-5002
publication_status: published
publisher: American Chemical Society (ACS)
status: public
title: Large-Scale Formation of DNA Origami Lattices on Silicon
type: journal_article
user_id: '48864'
volume: 35
year: '2023'
...
---
_id: '42518'
article_number: '2200134'
author:
- first_name: Bhanu Kiran
full_name: Pothineni, Bhanu Kiran
last_name: Pothineni
- first_name: Adrian
full_name: Keller, Adrian
id: '48864'
last_name: Keller
orcid: 0000-0001-7139-3110
citation:
ama: 'Pothineni BK, Keller A. Nanoparticle‐Based Formulations of Glycopeptide Antibiotics:
A Means for Overcoming Vancomycin Resistance in Bacterial Pathogens? Advanced
NanoBiomed Research. 2023;3. doi:10.1002/anbr.202200134'
apa: 'Pothineni, B. K., & Keller, A. (2023). Nanoparticle‐Based Formulations
of Glycopeptide Antibiotics: A Means for Overcoming Vancomycin Resistance in Bacterial
Pathogens? Advanced NanoBiomed Research, 3, Article 2200134. https://doi.org/10.1002/anbr.202200134'
bibtex: '@article{Pothineni_Keller_2023, title={Nanoparticle‐Based Formulations
of Glycopeptide Antibiotics: A Means for Overcoming Vancomycin Resistance in Bacterial
Pathogens?}, volume={3}, DOI={10.1002/anbr.202200134},
number={2200134}, journal={Advanced NanoBiomed Research}, publisher={Wiley}, author={Pothineni,
Bhanu Kiran and Keller, Adrian}, year={2023} }'
chicago: 'Pothineni, Bhanu Kiran, and Adrian Keller. “Nanoparticle‐Based Formulations
of Glycopeptide Antibiotics: A Means for Overcoming Vancomycin Resistance in Bacterial
Pathogens?” Advanced NanoBiomed Research 3 (2023). https://doi.org/10.1002/anbr.202200134.'
ieee: 'B. K. Pothineni and A. Keller, “Nanoparticle‐Based Formulations of Glycopeptide
Antibiotics: A Means for Overcoming Vancomycin Resistance in Bacterial Pathogens?,”
Advanced NanoBiomed Research, vol. 3, Art. no. 2200134, 2023, doi: 10.1002/anbr.202200134.'
mla: 'Pothineni, Bhanu Kiran, and Adrian Keller. “Nanoparticle‐Based Formulations
of Glycopeptide Antibiotics: A Means for Overcoming Vancomycin Resistance in Bacterial
Pathogens?” Advanced NanoBiomed Research, vol. 3, 2200134, Wiley, 2023,
doi:10.1002/anbr.202200134.'
short: B.K. Pothineni, A. Keller, Advanced NanoBiomed Research 3 (2023).
date_created: 2023-02-27T07:43:00Z
date_updated: 2023-05-05T10:52:11Z
department:
- _id: '302'
doi: 10.1002/anbr.202200134
intvolume: ' 3'
keyword:
- General Medicine
language:
- iso: eng
publication: Advanced NanoBiomed Research
publication_identifier:
issn:
- 2699-9307
- 2699-9307
publication_status: published
publisher: Wiley
status: public
title: 'Nanoparticle‐Based Formulations of Glycopeptide Antibiotics: A Means for Overcoming
Vancomycin Resistance in Bacterial Pathogens?'
type: journal_article
user_id: '48864'
volume: 3
year: '2023'
...
---
_id: '44503'
author:
- first_name: Marcel
full_name: Hanke, Marcel
last_name: Hanke
- first_name: Emilia
full_name: Tomm, Emilia
last_name: Tomm
- first_name: Guido
full_name: Grundmeier, Guido
id: '194'
last_name: Grundmeier
- first_name: Adrian
full_name: Keller, Adrian
id: '48864'
last_name: Keller
orcid: 0000-0001-7139-3110
citation:
ama: Hanke M, Tomm E, Grundmeier G, Keller A. Effect of Ionic Strength on the Thermal
Stability of DNA Origami Nanostructures. ChemBioChem. Published online
2023. doi:10.1002/cbic.202300338
apa: Hanke, M., Tomm, E., Grundmeier, G., & Keller, A. (2023). Effect of Ionic
Strength on the Thermal Stability of DNA Origami Nanostructures. ChemBioChem.
https://doi.org/10.1002/cbic.202300338
bibtex: '@article{Hanke_Tomm_Grundmeier_Keller_2023, title={Effect of Ionic Strength
on the Thermal Stability of DNA Origami Nanostructures}, DOI={10.1002/cbic.202300338},
journal={ChemBioChem}, publisher={Wiley}, author={Hanke, Marcel and Tomm, Emilia
and Grundmeier, Guido and Keller, Adrian}, year={2023} }'
chicago: Hanke, Marcel, Emilia Tomm, Guido Grundmeier, and Adrian Keller. “Effect
of Ionic Strength on the Thermal Stability of DNA Origami Nanostructures.” ChemBioChem,
2023. https://doi.org/10.1002/cbic.202300338.
ieee: 'M. Hanke, E. Tomm, G. Grundmeier, and A. Keller, “Effect of Ionic Strength
on the Thermal Stability of DNA Origami Nanostructures,” ChemBioChem, 2023,
doi: 10.1002/cbic.202300338.'
mla: Hanke, Marcel, et al. “Effect of Ionic Strength on the Thermal Stability of
DNA Origami Nanostructures.” ChemBioChem, Wiley, 2023, doi:10.1002/cbic.202300338.
short: M. Hanke, E. Tomm, G. Grundmeier, A. Keller, ChemBioChem (2023).
date_created: 2023-05-05T10:47:29Z
date_updated: 2023-05-05T10:48:00Z
department:
- _id: '302'
doi: 10.1002/cbic.202300338
keyword:
- Organic Chemistry
- Molecular Biology
- Molecular Medicine
- Biochemistry
language:
- iso: eng
publication: ChemBioChem
publication_identifier:
issn:
- 1439-4227
- 1439-7633
publication_status: published
publisher: Wiley
status: public
title: Effect of Ionic Strength on the Thermal Stability of DNA Origami Nanostructures
type: journal_article
user_id: '48864'
year: '2023'
...
---
_id: '44504'
author:
- first_name: Veikko
full_name: Linko, Veikko
last_name: Linko
- first_name: Adrian
full_name: Keller, Adrian
id: '48864'
last_name: Keller
orcid: 0000-0001-7139-3110
citation:
ama: 'Linko V, Keller A. Stability of DNA Origami Nanostructures in Physiological
Media: The Role of Molecular Interactions. Small. Published online 2023.
doi:10.1002/smll.202301935'
apa: 'Linko, V., & Keller, A. (2023). Stability of DNA Origami Nanostructures
in Physiological Media: The Role of Molecular Interactions. Small. https://doi.org/10.1002/smll.202301935'
bibtex: '@article{Linko_Keller_2023, title={Stability of DNA Origami Nanostructures
in Physiological Media: The Role of Molecular Interactions}, DOI={10.1002/smll.202301935},
journal={Small}, publisher={Wiley}, author={Linko, Veikko and Keller, Adrian},
year={2023} }'
chicago: 'Linko, Veikko, and Adrian Keller. “Stability of DNA Origami Nanostructures
in Physiological Media: The Role of Molecular Interactions.” Small, 2023.
https://doi.org/10.1002/smll.202301935.'
ieee: 'V. Linko and A. Keller, “Stability of DNA Origami Nanostructures in Physiological
Media: The Role of Molecular Interactions,” Small, 2023, doi: 10.1002/smll.202301935.'
mla: 'Linko, Veikko, and Adrian Keller. “Stability of DNA Origami Nanostructures
in Physiological Media: The Role of Molecular Interactions.” Small, Wiley,
2023, doi:10.1002/smll.202301935.'
short: V. Linko, A. Keller, Small (2023).
date_created: 2023-05-05T10:49:01Z
date_updated: 2023-05-05T10:49:18Z
department:
- _id: '302'
doi: 10.1002/smll.202301935
keyword:
- Biomaterials
- Biotechnology
- General Materials Science
- General Chemistry
language:
- iso: eng
publication: Small
publication_identifier:
issn:
- 1613-6810
- 1613-6829
publication_status: published
publisher: Wiley
status: public
title: 'Stability of DNA Origami Nanostructures in Physiological Media: The Role of
Molecular Interactions'
type: journal_article
user_id: '48864'
year: '2023'
...
---
_id: '44509'
author:
- first_name: Anne
full_name: Kruse, Anne
id: '55833'
last_name: Kruse
citation:
ama: Kruse A. Entwicklung einer Methode zur Integration der Additiven Fertigung
in die Serienproduktion am Beispiel des Lasersinterns. Vol 27.; 2023.
apa: Kruse, A. (2023). Entwicklung einer Methode zur Integration der Additiven
Fertigung in die Serienproduktion am Beispiel des Lasersinterns (Vol. 27).
bibtex: '@book{Kruse_2023, series={Forschungsberichte des Direct Manufacturing Research
Centers }, title={Entwicklung einer Methode zur Integration der Additiven Fertigung
in die Serienproduktion am Beispiel des Lasersinterns}, volume={27}, author={Kruse,
Anne}, year={2023}, collection={Forschungsberichte des Direct Manufacturing Research
Centers } }'
chicago: Kruse, Anne. Entwicklung einer Methode zur Integration der Additiven
Fertigung in die Serienproduktion am Beispiel des Lasersinterns. Vol. 27.
Forschungsberichte des Direct Manufacturing Research Centers , 2023.
ieee: A. Kruse, Entwicklung einer Methode zur Integration der Additiven Fertigung
in die Serienproduktion am Beispiel des Lasersinterns, vol. 27. 2023.
mla: Kruse, Anne. Entwicklung einer Methode zur Integration der Additiven Fertigung
in die Serienproduktion am Beispiel des Lasersinterns. 2023.
short: A. Kruse, Entwicklung einer Methode zur Integration der Additiven Fertigung
in die Serienproduktion am Beispiel des Lasersinterns, 2023.
date_created: 2023-05-05T11:24:51Z
date_updated: 2023-05-05T11:24:56Z
department:
- _id: '144'
- _id: '219'
- _id: '624'
- _id: '741'
intvolume: ' 27'
language:
- iso: ger
page: '145'
publication_identifier:
isbn:
- 978-3-8440-8955-4
publication_status: published
series_title: 'Forschungsberichte des Direct Manufacturing Research Centers '
status: public
supervisor:
- first_name: Rainer
full_name: Koch, Rainer
last_name: Koch
title: Entwicklung einer Methode zur Integration der Additiven Fertigung in die Serienproduktion
am Beispiel des Lasersinterns
type: dissertation
user_id: '55833'
volume: 27
year: '2023'
...
---
_id: '44512'
abstract:
- lang: eng
text: "For open world applications, deep neural networks (DNNs) need to be aware
of\r\npreviously unseen data and adaptable to evolving environments. Furthermore,
it\r\nis desirable to detect and learn novel classes which are not included in
the\r\nDNNs underlying set of semantic classes in an unsupervised fashion. The
method\r\nproposed in this article builds upon anomaly detection to retrieve\r\nout-of-distribution
(OoD) data as candidates for new classes. We thereafter\r\nextend the DNN by $k$
empty classes and fine-tune it on the OoD data samples.\r\nTo this end, we introduce
two loss functions, which 1) entice the DNN to assign\r\nOoD samples to the empty
classes and 2) to minimize the inner-class feature\r\ndistances between them.
Thus, instead of ground truth which contains labels for\r\nthe different novel
classes, the DNN obtains a single OoD label together with a\r\ndistance matrix,
which is computed in advance. We perform several experiments\r\nfor image classification
and semantic segmentation, which demonstrate that a\r\nDNN can extend its own
semantic space by multiple classes without having access\r\nto ground truth."
author:
- first_name: Svenja
full_name: Uhlemeyer, Svenja
last_name: Uhlemeyer
- first_name: Julian
full_name: Lienen, Julian
id: '44040'
last_name: Lienen
- first_name: Eyke
full_name: Hüllermeier, Eyke
id: '48129'
last_name: Hüllermeier
- first_name: Hanno
full_name: Gottschalk, Hanno
last_name: Gottschalk
citation:
ama: Uhlemeyer S, Lienen J, Hüllermeier E, Gottschalk H. Detecting Novelties with
Empty Classes. arXiv:230500983. Published online 2023.
apa: Uhlemeyer, S., Lienen, J., Hüllermeier, E., & Gottschalk, H. (2023). Detecting
Novelties with Empty Classes. In arXiv:2305.00983.
bibtex: '@article{Uhlemeyer_Lienen_Hüllermeier_Gottschalk_2023, title={Detecting
Novelties with Empty Classes}, journal={arXiv:2305.00983}, author={Uhlemeyer,
Svenja and Lienen, Julian and Hüllermeier, Eyke and Gottschalk, Hanno}, year={2023}
}'
chicago: Uhlemeyer, Svenja, Julian Lienen, Eyke Hüllermeier, and Hanno Gottschalk.
“Detecting Novelties with Empty Classes.” ArXiv:2305.00983, 2023.
ieee: S. Uhlemeyer, J. Lienen, E. Hüllermeier, and H. Gottschalk, “Detecting Novelties
with Empty Classes,” arXiv:2305.00983. 2023.
mla: Uhlemeyer, Svenja, et al. “Detecting Novelties with Empty Classes.” ArXiv:2305.00983,
2023.
short: S. Uhlemeyer, J. Lienen, E. Hüllermeier, H. Gottschalk, ArXiv:2305.00983
(2023).
date_created: 2023-05-05T11:37:00Z
date_updated: 2023-05-05T11:39:10Z
external_id:
arxiv:
- '2305.00983'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://arxiv.org/pdf/2305.00983.pdf
oa: '1'
publication: arXiv:2305.00983
status: public
title: Detecting Novelties with Empty Classes
type: preprint
user_id: '44040'
year: '2023'
...