---
_id: '46475'
abstract:
- lang: ger
text: Dieser Beitrag bietet verschiedene professionelle Perspektiven auf den popmusikalischen
Kommunikationsprozesses innerhalb postdigitaler Popmusikjournalismuskulturen.
Neben einer wissenschaftlichen Rahmung, Übersicht und Strukturierung des Untersuchungsfelds
und des Forschungsstands versammelt der Beitrag multiperspektivische Thesen, die
journalistische Praktiken und ihre Reflexionen von Produktion über Distribution
und Rezeption/Nutzung bis zur Weiterverarbeitung inklusive Archivierung/Institutionalisierung/Musealisierung
aufgreifen und herausstellen. Die aufgestellten Thesen gelten als Aufschlag für
die zukünftige Analyse des so fundamentalen und doch auch immer wieder übersehenen
Berufsfeldes und seiner Rezeption zwischen Faszination und Exploitation.
author:
- first_name: Tanja
full_name: Godlewsky, Tanja
last_name: Godlewsky
- first_name: Christoph
full_name: Jacke, Christoph
id: '20747'
last_name: Jacke
- first_name: Stefanie
full_name: Roenneke, Stefanie
last_name: Roenneke
- first_name: Thomas
full_name: Venker, Thomas
last_name: Venker
citation:
ama: 'Godlewsky T, Jacke C, Roenneke S, Venker T. Pop(musik)journalismen zwischen
Printmagazin-Krise und postdigitaler Realität – Forschungsüberblick und multiperspektivische
Thesen. In: Moormann P, Ruth N, eds. Musik Und Internet. Aktuelle Phänomene
Populärer Kulturen. Springer Fachmedien Wiesbaden; 2023. doi:10.1007/978-3-658-39145-4_11'
apa: Godlewsky, T., Jacke, C., Roenneke, S., & Venker, T. (2023). Pop(musik)journalismen
zwischen Printmagazin-Krise und postdigitaler Realität – Forschungsüberblick und
multiperspektivische Thesen. In P. Moormann & N. Ruth (Eds.), Musik und
Internet. Aktuelle Phänomene populärer Kulturen. Springer Fachmedien Wiesbaden.
https://doi.org/10.1007/978-3-658-39145-4_11
bibtex: '@inbook{Godlewsky_Jacke_Roenneke_Venker_2023, place={Wiesbaden}, title={Pop(musik)journalismen
zwischen Printmagazin-Krise und postdigitaler Realität – Forschungsüberblick und
multiperspektivische Thesen}, DOI={10.1007/978-3-658-39145-4_11},
booktitle={Musik und Internet. Aktuelle Phänomene populärer Kulturen}, publisher={Springer
Fachmedien Wiesbaden}, author={Godlewsky, Tanja and Jacke, Christoph and Roenneke,
Stefanie and Venker, Thomas}, editor={Moormann, Peter and Ruth, Nicolas}, year={2023}
}'
chicago: 'Godlewsky, Tanja, Christoph Jacke, Stefanie Roenneke, and Thomas Venker.
“Pop(Musik)Journalismen Zwischen Printmagazin-Krise Und Postdigitaler Realität
– Forschungsüberblick Und Multiperspektivische Thesen.” In Musik Und Internet.
Aktuelle Phänomene Populärer Kulturen, edited by Peter Moormann and Nicolas
Ruth. Wiesbaden: Springer Fachmedien Wiesbaden, 2023. https://doi.org/10.1007/978-3-658-39145-4_11.'
ieee: 'T. Godlewsky, C. Jacke, S. Roenneke, and T. Venker, “Pop(musik)journalismen
zwischen Printmagazin-Krise und postdigitaler Realität – Forschungsüberblick und
multiperspektivische Thesen,” in Musik und Internet. Aktuelle Phänomene populärer
Kulturen, P. Moormann and N. Ruth, Eds. Wiesbaden: Springer Fachmedien Wiesbaden,
2023.'
mla: Godlewsky, Tanja, et al. “Pop(Musik)Journalismen Zwischen Printmagazin-Krise
Und Postdigitaler Realität – Forschungsüberblick Und Multiperspektivische Thesen.”
Musik Und Internet. Aktuelle Phänomene Populärer Kulturen, edited by Peter
Moormann and Nicolas Ruth, Springer Fachmedien Wiesbaden, 2023, doi:10.1007/978-3-658-39145-4_11.
short: 'T. Godlewsky, C. Jacke, S. Roenneke, T. Venker, in: P. Moormann, N. Ruth
(Eds.), Musik Und Internet. Aktuelle Phänomene Populärer Kulturen, Springer Fachmedien
Wiesbaden, Wiesbaden, 2023.'
date_created: 2023-08-10T10:11:20Z
date_updated: 2023-08-10T10:13:18Z
department:
- _id: '607'
doi: 10.1007/978-3-658-39145-4_11
editor:
- first_name: Peter
full_name: Moormann, Peter
last_name: Moormann
- first_name: Nicolas
full_name: Ruth, Nicolas
last_name: Ruth
language:
- iso: eng
place: Wiesbaden
publication: Musik und Internet. Aktuelle Phänomene populärer Kulturen
publication_identifier:
isbn:
- '9783658391447'
- '9783658391454'
issn:
- 2626-6199
- 2626-6202
publication_status: published
publisher: Springer Fachmedien Wiesbaden
status: public
title: Pop(musik)journalismen zwischen Printmagazin-Krise und postdigitaler Realität
– Forschungsüberblick und multiperspektivische Thesen
type: book_chapter
user_id: '33226'
year: '2023'
...
---
_id: '46476'
abstract:
- lang: eng
text: Abstract. Increasing resource efficiency is a major challenge and
affects almost every aspect of social and economic life. The mobility sector in
particular is responsible for a large share of primary energy consumption and
is increasingly in the focus of public interest. One possibility to adress these
challenges is to reduce the vehicle weight by means of lightweight construction
technologies such as multi-material systems. These assemblies consist of workpieces
with different mechanical and geometrical properties, which poses a major challenge
for joining technology. Mechanical joining processes such as semi-tubular self-piercing
riveting are often used in the production of these assemblies, but due to their
process characteristics, they are rigid and can only react to changing process
variables to a limited extent. One way to increase the versatility of self-piercing
riveting is to superimpose a tumbling kinematics on the punch. During tumbling,
an angular offset of the punch axis to the tool axis is set and the contact area
between punch and workpiece is reduced. In this work, investigations were carried
out to determine how the tumbling strategy, consisting of the parameters tumbling
angle, tumbling onset and tumbling kinematics, affects the material flow of the
rivet element. For this purpose, experimental tests are conducted with the typical
materials of conventional multi-material systems and the geometric joint formations
are determined by means of macrographs.
author:
- first_name: S.
full_name: Wituschek, S.
last_name: Wituschek
- first_name: L.
full_name: Elbel, L.
last_name: Elbel
- first_name: M.
full_name: Lechner, M.
last_name: Lechner
citation:
ama: 'Wituschek S, Elbel L, Lechner M. Versatile self-piercing riveting with a tumbling
superimposed punch. In: Materials Research Proceedings. Materials Research
Forum LLC; 2023. doi:10.21741/9781644902479-122'
apa: Wituschek, S., Elbel, L., & Lechner, M. (2023). Versatile self-piercing
riveting with a tumbling superimposed punch. Materials Research Proceedings.
https://doi.org/10.21741/9781644902479-122
bibtex: '@inproceedings{Wituschek_Elbel_Lechner_2023, title={Versatile self-piercing
riveting with a tumbling superimposed punch}, DOI={10.21741/9781644902479-122},
booktitle={Materials Research Proceedings}, publisher={Materials Research Forum
LLC}, author={Wituschek, S. and Elbel, L. and Lechner, M.}, year={2023} }'
chicago: Wituschek, S., L. Elbel, and M. Lechner. “Versatile Self-Piercing Riveting
with a Tumbling Superimposed Punch.” In Materials Research Proceedings.
Materials Research Forum LLC, 2023. https://doi.org/10.21741/9781644902479-122.
ieee: 'S. Wituschek, L. Elbel, and M. Lechner, “Versatile self-piercing riveting
with a tumbling superimposed punch,” 2023, doi: 10.21741/9781644902479-122.'
mla: Wituschek, S., et al. “Versatile Self-Piercing Riveting with a Tumbling Superimposed
Punch.” Materials Research Proceedings, Materials Research Forum LLC, 2023,
doi:10.21741/9781644902479-122.
short: 'S. Wituschek, L. Elbel, M. Lechner, in: Materials Research Proceedings,
Materials Research Forum LLC, 2023.'
date_created: 2023-08-10T10:38:51Z
date_updated: 2023-08-10T10:41:41Z
doi: 10.21741/9781644902479-122
language:
- iso: eng
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '133'
name: 'TRR 285 - C: TRR 285 - Project Area C'
- _id: '146'
name: 'TRR 285 – C02: TRR 285 - Subproject C02'
publication: Materials Research Proceedings
publication_identifier:
issn:
- 2474-395X
publication_status: published
publisher: Materials Research Forum LLC
status: public
title: Versatile self-piercing riveting with a tumbling superimposed punch
type: conference
user_id: '83423'
year: '2023'
...
---
_id: '46482'
abstract:
- lang: eng
text: "Ever increasing demands on the performance of microchips are leading to ever
more complex semiconductor technologies with ever shrinking feature sizes. Complex
applications with high demands on safety and reliability, such as autonomous driving,
are simultaneously driving the requirements for test and diagnosis of VLSI circuits.
Throughout the life cycle of a microchip, uncertainties occur that affect its
timing behavior. For example, weak circuit structures, aging effects, or process
variations can lead to a change in the timing behavior of the circuit. While these
uncertainties do not necessarily lead to a change of the functional behavior,
they can lead to a reliability problem.\r\nWith modular and hybrid compaction
two test instruments are presented in this work that can be used for X-tolerant
test response compaction in the built-in Faster-than-At-Speed Test (FAST) which
is used to detect uncertainties in VLSI circuits. One challenge for test response
compaction during FAST is the high and varying X-rate at the outputs of the circuit
under test. By dividing the circuit outputs into test groups and separately compacting
these test groups using stochastic compactors, the modular compaction is able
to handle these high and varying X-rates.\r\nTo deal with uncertainties on logic
interconnects, a method for distinguishing crosstalk and process variation is
presented. In current semiconductor technologies, the number of parasitic coupling
capacitances between logic interconnects is growing. These coupling capacitances
can lead to crosstalk, which causes increased current flow in the logic interconnects,
which in turn can lead to increased electromigration. In the presented method,
delay maps describing the timing behavior of the circuit outputs at different
operating points are used to train artificial neural networks which classify the
tested circuits into fault-free and faulty."
- lang: ger
text: "Immer größere Anforderungen an die Leistungsfähigkeit von Mikrochips führen
zu Halbleitertechnologien mit immer kleiner werdenden Strukturgrößen. Anwendungen
mit hohen Ansprüchen an Sicherheit und Zuverlässigkeit, wie z.B. das autonome
Fahren, treiben gleichzeitig die Anforderungen an den Test hochintegrierter Schaltungen
an. Während des gesamten Lebenszyklus eines Mikrochips kommt es zu Unsicherheiten
im Zeitverhalten. So können z.B. schwache Schaltungsstrukturen, Alterungseffekte
oder Prozessvariationen zu einer Veränderung des Zeitverhaltens führen. Während
diese Unsicherheiten nicht zu einer Veränderung des funktionalen Verhaltens führen
müssen, können sie jedoch zu einem Zuverlässigkeitsproblem führen.\r\nMit der
modularen und der hybriden Kompaktierung werden in dieser Arbeit zwei Testinstrumente
vorgestellt, die für die X-tolerante Testantwortkompaktierung im eingebauten Hochgeschwindigkeitstest
verwendet werden können. Eine Herausforderung für die Testantwortkompaktierung
während des Hochgeschwindigkeitstests ist die hohe und variierende X-Rate an den
Ausgängen der zu testenden Schaltung. Durch die Einteilung der Schaltungsausgänge
in Prüfgruppen und die separierte Kompaktierung der Prüfgruppen mithilfe von stochastischen
Kompaktierern, können die vorgestellten Verfahren diese hohen und variierenden
X-Raten verarbeiten.\r\nFür den Umgang mit Unsicherheiten auf Verbindungsleitungen
der Logik-Schaltung wird ein Verfahren zur Unterscheidung von Übersprechen und
Prozessvariation vorgestellt. In aktuellen Halbleitertechnologien kommt es vermehrt
zu parasitären Koppelkapazitäten zwischen den Verbindungsleitungen. In dem vorgestellten
Verfahren werden künstliche neuronale Netze trainiert, um die Schaltungen in fehlerfrei
und fehlerhaft zu klassifizieren."
author:
- first_name: Alexander
full_name: Sprenger, Alexander
id: '22707'
last_name: Sprenger
orcid: 0000-0002-0775-7677
citation:
ama: Sprenger A. Testinstrumente und Testdatenanalyse zur Verarbeitung von Unsicherheiten
in Logikblöcken hochintegrierter Schaltungen. Universität Paderborn; 2023.
doi:10.17619/UNIPB/1-1787
apa: Sprenger, A. (2023). Testinstrumente und Testdatenanalyse zur Verarbeitung
von Unsicherheiten in Logikblöcken hochintegrierter Schaltungen. Universität
Paderborn. https://doi.org/10.17619/UNIPB/1-1787
bibtex: '@book{Sprenger_2023, place={Paderborn}, title={Testinstrumente und Testdatenanalyse
zur Verarbeitung von Unsicherheiten in Logikblöcken hochintegrierter Schaltungen},
DOI={10.17619/UNIPB/1-1787},
publisher={Universität Paderborn}, author={Sprenger, Alexander}, year={2023} }'
chicago: 'Sprenger, Alexander. Testinstrumente und Testdatenanalyse zur Verarbeitung
von Unsicherheiten in Logikblöcken hochintegrierter Schaltungen. Paderborn:
Universität Paderborn, 2023. https://doi.org/10.17619/UNIPB/1-1787.'
ieee: 'A. Sprenger, Testinstrumente und Testdatenanalyse zur Verarbeitung von
Unsicherheiten in Logikblöcken hochintegrierter Schaltungen. Paderborn: Universität
Paderborn, 2023.'
mla: Sprenger, Alexander. Testinstrumente und Testdatenanalyse zur Verarbeitung
von Unsicherheiten in Logikblöcken hochintegrierter Schaltungen. Universität
Paderborn, 2023, doi:10.17619/UNIPB/1-1787.
short: A. Sprenger, Testinstrumente und Testdatenanalyse zur Verarbeitung von Unsicherheiten
in Logikblöcken hochintegrierter Schaltungen, Universität Paderborn, Paderborn,
2023.
date_created: 2023-08-12T09:10:38Z
date_updated: 2023-08-12T09:13:18Z
department:
- _id: '48'
doi: 10.17619/UNIPB/1-1787
extern: '1'
keyword:
- Testantwortkompaktierung
- Prozessvariation
- Silicon Lifecycle Management
language:
- iso: ger
main_file_link:
- open_access: '1'
url: https://nbn-resolving.org/urn:nbn:de:hbz:466:2-45493
oa: '1'
page: xi, 160
place: Paderborn
publication_status: published
publisher: Universität Paderborn
status: public
supervisor:
- first_name: Sybille
full_name: Hellebrand, Sybille
id: '209'
last_name: Hellebrand
orcid: 0000-0002-3717-3939
- first_name: Marco
full_name: Platzner, Marco
id: '398'
last_name: Platzner
title: Testinstrumente und Testdatenanalyse zur Verarbeitung von Unsicherheiten in
Logikblöcken hochintegrierter Schaltungen
type: dissertation
user_id: '22707'
year: '2023'
...
---
_id: '46485'
abstract:
- lang: eng
text: We present a miniaturized pulse shaping device that creates an arbitrary dispersion
through the interaction of multiple metasurfaces on less than 2 mm3
volume. For this, a metalens and a grating-metasurface between two silver mirrors
are fabricated. The grating contains further phase information to achieve the
device's pulse shaping functionality.
article_number: FTh4D.3
author:
- first_name: René
full_name: Geromel, René
last_name: Geromel
- first_name: Philip
full_name: Georgi, Philip
last_name: Georgi
- first_name: Maximilian
full_name: Protte, Maximilian
id: '46170'
last_name: Protte
- first_name: Tim
full_name: Bartley, Tim
id: '49683'
last_name: Bartley
- first_name: Lingling
full_name: Huang, Lingling
last_name: Huang
- first_name: Thomas
full_name: Zentgraf, Thomas
id: '30525'
last_name: Zentgraf
orcid: 0000-0002-8662-1101
citation:
ama: 'Geromel R, Georgi P, Protte M, Bartley T, Huang L, Zentgraf T. Dispersion
control with integrated plasmonic metasurfaces. In: CLEO: Fundamental Science
2023. Technical Digest Series. Optica Publishing Group; 2023. doi:10.1364/cleo_fs.2023.fth4d.3'
apa: 'Geromel, R., Georgi, P., Protte, M., Bartley, T., Huang, L., & Zentgraf,
T. (2023). Dispersion control with integrated plasmonic metasurfaces. CLEO:
Fundamental Science 2023, Article FTh4D.3. CLEO: Fundamental Science 2023,
San Jose, USA. https://doi.org/10.1364/cleo_fs.2023.fth4d.3'
bibtex: '@inproceedings{Geromel_Georgi_Protte_Bartley_Huang_Zentgraf_2023, series={Technical
Digest Series}, title={Dispersion control with integrated plasmonic metasurfaces},
DOI={10.1364/cleo_fs.2023.fth4d.3},
number={FTh4D.3}, booktitle={CLEO: Fundamental Science 2023}, publisher={Optica
Publishing Group}, author={Geromel, René and Georgi, Philip and Protte, Maximilian
and Bartley, Tim and Huang, Lingling and Zentgraf, Thomas}, year={2023}, collection={Technical
Digest Series} }'
chicago: 'Geromel, René, Philip Georgi, Maximilian Protte, Tim Bartley, Lingling
Huang, and Thomas Zentgraf. “Dispersion Control with Integrated Plasmonic Metasurfaces.”
In CLEO: Fundamental Science 2023. Technical Digest Series. Optica Publishing
Group, 2023. https://doi.org/10.1364/cleo_fs.2023.fth4d.3.'
ieee: 'R. Geromel, P. Georgi, M. Protte, T. Bartley, L. Huang, and T. Zentgraf,
“Dispersion control with integrated plasmonic metasurfaces,” presented at the
CLEO: Fundamental Science 2023, San Jose, USA, 2023, doi: 10.1364/cleo_fs.2023.fth4d.3.'
mla: 'Geromel, René, et al. “Dispersion Control with Integrated Plasmonic Metasurfaces.”
CLEO: Fundamental Science 2023, FTh4D.3, Optica Publishing Group, 2023,
doi:10.1364/cleo_fs.2023.fth4d.3.'
short: 'R. Geromel, P. Georgi, M. Protte, T. Bartley, L. Huang, T. Zentgraf, in:
CLEO: Fundamental Science 2023, Optica Publishing Group, 2023.'
conference:
end_date: 2023-05-12
location: San Jose, USA
name: 'CLEO: Fundamental Science 2023'
start_date: 2023-05-07
date_created: 2023-08-14T08:19:22Z
date_updated: 2023-08-14T08:22:31Z
department:
- _id: '15'
- _id: '230'
- _id: '289'
- _id: '623'
doi: 10.1364/cleo_fs.2023.fth4d.3
language:
- iso: eng
project:
- _id: '53'
grant_number: '231447078'
name: 'TRR 142: TRR 142 - Maßgeschneiderte nichtlineare Photonik: Von grundlegenden
Konzepten zu funktionellen Strukturen'
- _id: '55'
name: 'TRR 142 - B: TRR 142 - Project Area B'
- _id: '170'
grant_number: '231447078'
name: 'TRR 142 - B09: TRR 142 - Effiziente Erzeugung mit maßgeschneiderter optischer
Phaselage der zweiten Harmonischen mittels Quasi-gebundener Zustände in GaAs Metaoberflächen
(B09*)'
publication: 'CLEO: Fundamental Science 2023'
publication_status: published
publisher: Optica Publishing Group
series_title: Technical Digest Series
status: public
title: Dispersion control with integrated plasmonic metasurfaces
type: conference
user_id: '30525'
year: '2023'
...
---
_id: '44851'
abstract:
- lang: eng
text: We present the fabrication of strain-free quantum dots in the In0.53Ga0.47As/In0.52Al0.48As-system
lattice matched to InP, as future sources for single and entangled photons for
long-haul fiber-based quantum communication in the optical C-band. We achieved
these quantum dots by local droplet etching via InAl droplets in an In0.52Al0.48As
layer and subsequent filling of the holes with In0.53Ga0.47As. Here, we present
detailed investigations of the hole morphologies measured by atomic force microscopy.
Statistical analysis of a set of nanoholes reveals a high degree of symmetry for
nearly half of them when etched at optimized temperatures. Overgrowth with 50–150 nm
In0.52Al0.48As increases their diameter and elongates the holes along the [01̄1]-direction.
By systematically scanning the parameter space, we were able to fill the holes
with In0.53Ga0.47As, and by capping the filled holes and performing photoluminescence
measurements, we observe photoluminescence emission in the O-band up into the
C-band depending on the filling height of the nanoholes.
author:
- first_name: D.
full_name: Deutsch, D.
last_name: Deutsch
- first_name: C.
full_name: Buchholz, C.
last_name: Buchholz
- first_name: V.
full_name: Zolatanosha, V.
last_name: Zolatanosha
- first_name: K. D.
full_name: Jöns, K. D.
last_name: Jöns
- first_name: D.
full_name: Reuter, D.
last_name: Reuter
citation:
ama: Deutsch D, Buchholz C, Zolatanosha V, Jöns KD, Reuter D. Telecom C-band photon
emission from (In,Ga)As quantum dots generated by filling nanoholes in In0.52Al0.48As
layers. AIP Advances. 2023;13(5). doi:10.1063/5.0147281
apa: Deutsch, D., Buchholz, C., Zolatanosha, V., Jöns, K. D., & Reuter, D. (2023).
Telecom C-band photon emission from (In,Ga)As quantum dots generated by filling
nanoholes in In0.52Al0.48As layers. AIP Advances, 13(5). https://doi.org/10.1063/5.0147281
bibtex: '@article{Deutsch_Buchholz_Zolatanosha_Jöns_Reuter_2023, title={Telecom
C-band photon emission from (In,Ga)As quantum dots generated by filling nanoholes
in In0.52Al0.48As layers}, volume={13}, DOI={10.1063/5.0147281},
number={5}, journal={AIP Advances}, publisher={AIP Publishing}, author={Deutsch,
D. and Buchholz, C. and Zolatanosha, V. and Jöns, K. D. and Reuter, D.}, year={2023}
}'
chicago: Deutsch, D., C. Buchholz, V. Zolatanosha, K. D. Jöns, and D. Reuter. “Telecom
C-Band Photon Emission from (In,Ga)As Quantum Dots Generated by Filling Nanoholes
in In0.52Al0.48As Layers.” AIP Advances 13, no. 5 (2023). https://doi.org/10.1063/5.0147281.
ieee: 'D. Deutsch, C. Buchholz, V. Zolatanosha, K. D. Jöns, and D. Reuter, “Telecom
C-band photon emission from (In,Ga)As quantum dots generated by filling nanoholes
in In0.52Al0.48As layers,” AIP Advances, vol. 13, no. 5, 2023, doi: 10.1063/5.0147281.'
mla: Deutsch, D., et al. “Telecom C-Band Photon Emission from (In,Ga)As Quantum
Dots Generated by Filling Nanoholes in In0.52Al0.48As Layers.” AIP Advances,
vol. 13, no. 5, AIP Publishing, 2023, doi:10.1063/5.0147281.
short: D. Deutsch, C. Buchholz, V. Zolatanosha, K.D. Jöns, D. Reuter, AIP Advances
13 (2023).
date_created: 2023-05-15T08:55:49Z
date_updated: 2023-08-14T10:05:15Z
department:
- _id: '15'
- _id: '230'
doi: 10.1063/5.0147281
intvolume: ' 13'
issue: '5'
keyword:
- General Physics and Astronomy
language:
- iso: eng
publication: AIP Advances
publication_identifier:
issn:
- 2158-3226
publication_status: published
publisher: AIP Publishing
status: public
title: Telecom C-band photon emission from (In,Ga)As quantum dots generated by filling
nanoholes in In0.52Al0.48As layers
type: journal_article
user_id: '37763'
volume: 13
year: '2023'
...
---
_id: '46480'
article_number: '147317'
author:
- first_name: Hendrik
full_name: Müller, Hendrik
last_name: Müller
- first_name: Christian
full_name: Weinberger, Christian
id: '11848'
last_name: Weinberger
- first_name: Guido
full_name: Grundmeier, Guido
id: '194'
last_name: Grundmeier
- first_name: Maria Teresa
full_name: de los Arcos de Pedro, Maria Teresa
id: '54556'
last_name: de los Arcos de Pedro
citation:
ama: Müller H, Weinberger C, Grundmeier G, de los Arcos de Pedro MT. UV-enhanced
environmental charge compensation in near ambient pressure XPS. Journal of
Electron Spectroscopy and Related Phenomena. 2023;264. doi:10.1016/j.elspec.2023.147317
apa: Müller, H., Weinberger, C., Grundmeier, G., & de los Arcos de Pedro, M.
T. (2023). UV-enhanced environmental charge compensation in near ambient pressure
XPS. Journal of Electron Spectroscopy and Related Phenomena, 264,
Article 147317. https://doi.org/10.1016/j.elspec.2023.147317
bibtex: '@article{Müller_Weinberger_Grundmeier_de los Arcos de Pedro_2023, title={UV-enhanced
environmental charge compensation in near ambient pressure XPS}, volume={264},
DOI={10.1016/j.elspec.2023.147317},
number={147317}, journal={Journal of Electron Spectroscopy and Related Phenomena},
publisher={Elsevier BV}, author={Müller, Hendrik and Weinberger, Christian and
Grundmeier, Guido and de los Arcos de Pedro, Maria Teresa}, year={2023} }'
chicago: Müller, Hendrik, Christian Weinberger, Guido Grundmeier, and Maria Teresa
de los Arcos de Pedro. “UV-Enhanced Environmental Charge Compensation in near
Ambient Pressure XPS.” Journal of Electron Spectroscopy and Related Phenomena
264 (2023). https://doi.org/10.1016/j.elspec.2023.147317.
ieee: 'H. Müller, C. Weinberger, G. Grundmeier, and M. T. de los Arcos de Pedro,
“UV-enhanced environmental charge compensation in near ambient pressure XPS,”
Journal of Electron Spectroscopy and Related Phenomena, vol. 264, Art.
no. 147317, 2023, doi: 10.1016/j.elspec.2023.147317.'
mla: Müller, Hendrik, et al. “UV-Enhanced Environmental Charge Compensation in near
Ambient Pressure XPS.” Journal of Electron Spectroscopy and Related Phenomena,
vol. 264, 147317, Elsevier BV, 2023, doi:10.1016/j.elspec.2023.147317.
short: H. Müller, C. Weinberger, G. Grundmeier, M.T. de los Arcos de Pedro, Journal
of Electron Spectroscopy and Related Phenomena 264 (2023).
date_created: 2023-08-11T14:11:57Z
date_updated: 2023-08-11T14:13:19Z
department:
- _id: '302'
doi: 10.1016/j.elspec.2023.147317
intvolume: ' 264'
keyword:
- Physical and Theoretical Chemistry
- Spectroscopy
- Condensed Matter Physics
- Atomic and Molecular Physics
- and Optics
- Radiation
- Electronic
- Optical and Magnetic Materials
language:
- iso: eng
publication: Journal of Electron Spectroscopy and Related Phenomena
publication_identifier:
issn:
- 0368-2048
publication_status: published
publisher: Elsevier BV
status: public
title: UV-enhanced environmental charge compensation in near ambient pressure XPS
type: journal_article
user_id: '54556'
volume: 264
year: '2023'
...
---
_id: '45371'
author:
- first_name: Julia
full_name: Elsner, Julia
id: '54277'
last_name: Elsner
- first_name: Claudia
full_name: Tenberge, Claudia
id: '67302'
last_name: Tenberge
- first_name: Sabine
full_name: Fechner, Sabine
id: '54823'
last_name: Fechner
orcid: 0000-0001-5645-5870
citation:
ama: 'Elsner J, Tenberge C, Fechner S. Videoanalyse des Modellierprozesses von Grundschüler*innen.
In: van Vorst H, ed. Lernen, Lehren und Forschen in einer digital geprägten
Welt. Vol 43. ; 2023:925-928.'
apa: Elsner, J., Tenberge, C., & Fechner, S. (2023). Videoanalyse des Modellierprozesses
von Grundschüler*innen. In H. van Vorst (Ed.), Lernen, Lehren und Forschen
in einer digital geprägten Welt (Vol. 43, pp. 925–928).
bibtex: '@inproceedings{Elsner_Tenberge_Fechner_2023, title={Videoanalyse des Modellierprozesses
von Grundschüler*innen}, volume={43}, booktitle={Lernen, Lehren und Forschen in
einer digital geprägten Welt}, author={Elsner, Julia and Tenberge, Claudia and
Fechner, Sabine}, editor={van Vorst, Helena}, year={2023}, pages={925–928} }'
chicago: Elsner, Julia, Claudia Tenberge, and Sabine Fechner. “Videoanalyse des
Modellierprozesses von Grundschüler*innen.” In Lernen, Lehren und Forschen
in einer digital geprägten Welt, edited by Helena van Vorst, 43:925–28, 2023.
ieee: J. Elsner, C. Tenberge, and S. Fechner, “Videoanalyse des Modellierprozesses
von Grundschüler*innen,” in Lernen, Lehren und Forschen in einer digital geprägten
Welt, 2023, vol. 43, pp. 925–928.
mla: Elsner, Julia, et al. “Videoanalyse des Modellierprozesses von Grundschüler*innen.”
Lernen, Lehren und Forschen in einer digital geprägten Welt, edited by
Helena van Vorst, vol. 43, 2023, pp. 925–28.
short: 'J. Elsner, C. Tenberge, S. Fechner, in: H. van Vorst (Ed.), Lernen, Lehren
und Forschen in einer digital geprägten Welt, 2023, pp. 925–928.'
date_created: 2023-05-31T05:38:24Z
date_updated: 2023-08-14T18:16:28Z
ddc:
- '370'
department:
- _id: '386'
- _id: '588'
editor:
- first_name: Helena
full_name: van Vorst, Helena
last_name: van Vorst
has_accepted_license: '1'
intvolume: ' 43'
language:
- iso: ger
page: 925-928
publication: Lernen, Lehren und Forschen in einer digital geprägten Welt
publication_status: published
status: public
title: Videoanalyse des Modellierprozesses von Grundschüler*innen
type: conference
user_id: '54823'
volume: 43
year: '2023'
...
---
_id: '46491'
author:
- first_name: Dennis
full_name: Kundisch, Dennis
id: '21117'
last_name: Kundisch
citation:
ama: Kundisch D. #DIGITALENTS - Digital Talents Programm geht in die zweite Runde.
Vol 1.; 2023:12-13.
apa: Kundisch, D. (2023). #DIGITALENTS - Digital Talents Programm geht in die
zweite Runde (Vol. 1, pp. 12–13).
bibtex: '@book{Kundisch_2023, series={Update - Das Magazin des SICP–Software Innovation
Campus Paderborn}, title={#DIGITALENTS - Digital Talents Programm geht in die
zweite Runde}, volume={1}, author={Kundisch, Dennis}, year={2023}, pages={12–13},
collection={Update - Das Magazin des SICP–Software Innovation Campus Paderborn}
}'
chicago: Kundisch, Dennis. #DIGITALENTS - Digital Talents Programm geht in die
zweite Runde. Vol. 1. Update - Das Magazin des SICP–Software Innovation Campus
Paderborn, 2023.
ieee: D. Kundisch, #DIGITALENTS - Digital Talents Programm geht in die zweite
Runde, vol. 1. 2023, pp. 12–13.
mla: Kundisch, Dennis. #DIGITALENTS - Digital Talents Programm geht in die zweite
Runde. 2023, pp. 12–13.
short: 'D. Kundisch, #DIGITALENTS - Digital Talents Programm geht in die zweite
Runde, 2023.'
date_created: 2023-08-15T07:45:48Z
date_updated: 2023-08-15T07:52:00Z
department:
- _id: '276'
- _id: '534'
intvolume: ' 1'
language:
- iso: ger
page: 12-13
publication_status: published
series_title: Update - Das Magazin des SICP–Software Innovation Campus Paderborn
status: public
title: '#DIGITALENTS - Digital Talents Programm geht in die zweite Runde'
type: working_paper
user_id: '16205'
volume: 1
year: '2023'
...
---
_id: '45656'
author:
- first_name: J. P.
full_name: Kempkes, J. P.
last_name: Kempkes
- first_name: K.
full_name: Kreuzhage, K.
last_name: Kreuzhage
- first_name: Dennis
full_name: Kundisch, Dennis
id: '21117'
last_name: Kundisch
- first_name: Janina
full_name: Seutter, Janina
id: '64464'
last_name: Seutter
- first_name: Christoph
full_name: Weskamp, Christoph
last_name: Weskamp
citation:
ama: Kempkes JP, Kreuzhage K, Kundisch D, Seutter J, Weskamp C. Digitale Transformation
im Theater – Mittels Besucherforschung und Entscheidungsunterstützung zur besseren
Angebotsgestaltung. Kultur Management Network Magazin. 2023;172.
apa: Kempkes, J. P., Kreuzhage, K., Kundisch, D., Seutter, J., & Weskamp, C.
(2023). Digitale Transformation im Theater – Mittels Besucherforschung und Entscheidungsunterstützung
zur besseren Angebotsgestaltung. Kultur Management Network Magazin, 172.
bibtex: '@article{Kempkes_Kreuzhage_Kundisch_Seutter_Weskamp_2023, title={Digitale
Transformation im Theater – Mittels Besucherforschung und Entscheidungsunterstützung
zur besseren Angebotsgestaltung}, volume={172}, journal={Kultur Management Network
Magazin}, author={Kempkes, J. P. and Kreuzhage, K. and Kundisch, Dennis and Seutter,
Janina and Weskamp, Christoph}, year={2023} }'
chicago: Kempkes, J. P., K. Kreuzhage, Dennis Kundisch, Janina Seutter, and Christoph
Weskamp. “Digitale Transformation im Theater – Mittels Besucherforschung und Entscheidungsunterstützung
zur besseren Angebotsgestaltung.” Kultur Management Network Magazin 172
(2023).
ieee: J. P. Kempkes, K. Kreuzhage, D. Kundisch, J. Seutter, and C. Weskamp, “Digitale
Transformation im Theater – Mittels Besucherforschung und Entscheidungsunterstützung
zur besseren Angebotsgestaltung,” Kultur Management Network Magazin, vol.
172, 2023.
mla: Kempkes, J. P., et al. “Digitale Transformation im Theater – Mittels Besucherforschung
und Entscheidungsunterstützung zur besseren Angebotsgestaltung.” Kultur Management
Network Magazin, vol. 172, 2023.
short: J.P. Kempkes, K. Kreuzhage, D. Kundisch, J. Seutter, C. Weskamp, Kultur Management
Network Magazin 172 (2023).
date_created: 2023-06-16T12:30:21Z
date_updated: 2023-08-15T11:10:10Z
department:
- _id: '276'
intvolume: ' 172'
language:
- iso: ger
publication: Kultur Management Network Magazin
publication_status: published
status: public
title: Digitale Transformation im Theater – Mittels Besucherforschung und Entscheidungsunterstützung
zur besseren Angebotsgestaltung
type: journal_article
user_id: '16205'
volume: 172
year: '2023'
...
---
_id: '46502'
author:
- first_name: Iris
full_name: Gräßler, Iris
id: '47565'
last_name: Gräßler
orcid: 0000-0001-5765-971X
- first_name: Dominik
full_name: Wiechel, Dominik
id: '67161'
last_name: Wiechel
citation:
ama: 'Gräßler I, Wiechel D. Customized impact analyses for technical engineering
changes. In: 2023 18th Annual System of Systems Engineering Conference (SoSe).
IEEE; 2023. doi:10.1109/sose59841.2023.10178484'
apa: Gräßler, I., & Wiechel, D. (2023). Customized impact analyses for technical
engineering changes. 2023 18th Annual System of Systems Engineering Conference
(SoSe). 18th Annual System of Systems Engineering Conference (SoSe), Lille.
https://doi.org/10.1109/sose59841.2023.10178484
bibtex: '@inproceedings{Gräßler_Wiechel_2023, title={Customized impact analyses
for technical engineering changes}, DOI={10.1109/sose59841.2023.10178484},
booktitle={2023 18th Annual System of Systems Engineering Conference (SoSe)},
publisher={IEEE}, author={Gräßler, Iris and Wiechel, Dominik}, year={2023} }'
chicago: Gräßler, Iris, and Dominik Wiechel. “Customized Impact Analyses for Technical
Engineering Changes.” In 2023 18th Annual System of Systems Engineering Conference
(SoSe). IEEE, 2023. https://doi.org/10.1109/sose59841.2023.10178484.
ieee: 'I. Gräßler and D. Wiechel, “Customized impact analyses for technical engineering
changes,” presented at the 18th Annual System of Systems Engineering Conference
(SoSe), Lille, 2023, doi: 10.1109/sose59841.2023.10178484.'
mla: Gräßler, Iris, and Dominik Wiechel. “Customized Impact Analyses for Technical
Engineering Changes.” 2023 18th Annual System of Systems Engineering Conference
(SoSe), IEEE, 2023, doi:10.1109/sose59841.2023.10178484.
short: 'I. Gräßler, D. Wiechel, in: 2023 18th Annual System of Systems Engineering
Conference (SoSe), IEEE, 2023.'
conference:
end_date: 2023-06-16
location: Lille
name: 18th Annual System of Systems Engineering Conference (SoSe)
start_date: 2023-06-14
date_created: 2023-08-15T14:13:40Z
date_updated: 2023-08-15T14:18:56Z
department:
- _id: '152'
doi: 10.1109/sose59841.2023.10178484
language:
- iso: eng
publication: 2023 18th Annual System of Systems Engineering Conference (SoSe)
publication_status: published
publisher: IEEE
quality_controlled: '1'
status: public
title: Customized impact analyses for technical engineering changes
type: conference
user_id: '67161'
year: '2023'
...
---
_id: '46503'
abstract:
- lang: eng
text: "\r\nPurpose\r\nThe
purpose of this study is to investigate the manufacturability of Fe-3Si lattice
structures and the resulting mechanical properties. This study could lead to the
successful processing of squirrel cage conductors (a lattice structure by design)
of an induction motor by additive manufacturing in the future.\r\n\r\n\r\nDesign/methodology/approach\r\nThe
compression behaviour of two lattice structures where struts are arranged in a
face-centred cubic position and vertical edges (FCCZ), and struts are placed at
body-centred cubic (BCC) positions, prepared by laser powder bed fusion (LPBF),
is explored. The experimental investigations are supported by finite element method
(FEM) simulations.\r\n\r\n\r\nFindings\r\nThe
FCCZ lattice structure presents a peak in the stress-strain curve, whereas the
BCC lattice structure manifests a plateau. The vertical struts aligned along the
compression direction lead to a significant increase in the load-carrying ability
of FCCZ lattice structures compared to BCC lattice structures. This results in
a peak in the stress-strain curve. However, the BCC lattice structure presents
the bending of struts with diagonal struts carrying the major loads with struts
near the faceplate receiving the least load. A high concentration of geometrically
necessary dislocations (GNDs) near the grain boundaries along cell formation is
observed in the microstructure.\r\n\r\n\r\nOriginality/value\r\nTo
the best of the authors’ knowledge, this is the first study on additive manufacturing
of Fe-3Si lattice structures. Currently, there are no investigations in the literature
on the manufacturability and mechanical properties of Fe-3Si lattice structures.\r\n"
author:
- first_name: Sudipta
full_name: Pramanik, Sudipta
last_name: Pramanik
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: Pramanik S, Hoyer K-P, Schaper M. Experimental and finite element method investigation
on the compression behaviour of FCCZ and BCC lattice structures of additively
manufactured Fe-3Si samples. Rapid Prototyping Journal. 2023;29(6):1257-1269.
doi:10.1108/rpj-06-2022-0190
apa: Pramanik, S., Hoyer, K.-P., & Schaper, M. (2023). Experimental and finite
element method investigation on the compression behaviour of FCCZ and BCC lattice
structures of additively manufactured Fe-3Si samples. Rapid Prototyping Journal,
29(6), 1257–1269. https://doi.org/10.1108/rpj-06-2022-0190
bibtex: '@article{Pramanik_Hoyer_Schaper_2023, title={Experimental and finite element
method investigation on the compression behaviour of FCCZ and BCC lattice structures
of additively manufactured Fe-3Si samples}, volume={29}, DOI={10.1108/rpj-06-2022-0190},
number={6}, journal={Rapid Prototyping Journal}, publisher={Emerald}, author={Pramanik,
Sudipta and Hoyer, Kay-Peter and Schaper, Mirko}, year={2023}, pages={1257–1269}
}'
chicago: 'Pramanik, Sudipta, Kay-Peter Hoyer, and Mirko Schaper. “Experimental and
Finite Element Method Investigation on the Compression Behaviour of FCCZ and BCC
Lattice Structures of Additively Manufactured Fe-3Si Samples.” Rapid Prototyping
Journal 29, no. 6 (2023): 1257–69. https://doi.org/10.1108/rpj-06-2022-0190.'
ieee: 'S. Pramanik, K.-P. Hoyer, and M. Schaper, “Experimental and finite element
method investigation on the compression behaviour of FCCZ and BCC lattice structures
of additively manufactured Fe-3Si samples,” Rapid Prototyping Journal,
vol. 29, no. 6, pp. 1257–1269, 2023, doi: 10.1108/rpj-06-2022-0190.'
mla: Pramanik, Sudipta, et al. “Experimental and Finite Element Method Investigation
on the Compression Behaviour of FCCZ and BCC Lattice Structures of Additively
Manufactured Fe-3Si Samples.” Rapid Prototyping Journal, vol. 29, no. 6,
Emerald, 2023, pp. 1257–69, doi:10.1108/rpj-06-2022-0190.
short: S. Pramanik, K.-P. Hoyer, M. Schaper, Rapid Prototyping Journal 29 (2023)
1257–1269.
date_created: 2023-08-16T06:20:42Z
date_updated: 2023-08-16T06:29:57Z
department:
- _id: '9'
- _id: '158'
doi: 10.1108/rpj-06-2022-0190
intvolume: ' 29'
issue: '6'
keyword:
- Industrial and Manufacturing Engineering
- Mechanical Engineering
language:
- iso: eng
page: 1257-1269
publication: Rapid Prototyping Journal
publication_identifier:
issn:
- 1355-2546
- 1355-2546
publication_status: published
publisher: Emerald
quality_controlled: '1'
status: public
title: Experimental and finite element method investigation on the compression behaviour
of FCCZ and BCC lattice structures of additively manufactured Fe-3Si samples
type: journal_article
user_id: '48411'
volume: 29
year: '2023'
...
---
_id: '46507'
author:
- first_name: Sudipta
full_name: Pramanik, Sudipta
last_name: Pramanik
- first_name: Dennis
full_name: Milaege, Dennis
last_name: Milaege
- first_name: Maxwell
full_name: Hein, Maxwell
id: '52771'
last_name: Hein
orcid: 0000-0002-3732-2236
- first_name: Anatolii
full_name: Andreiev, Anatolii
id: '50215'
last_name: Andreiev
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
citation:
ama: Pramanik S, Milaege D, Hein M, Andreiev A, Schaper M, Hoyer K-P. An Experimental
and Computational Modeling Study on Additively Manufactured Micro‐Architectured
Ti–24Nb–4Zr–8Sn Hollow‐Strut Lattice Structures. Advanced Engineering Materials.
2023;25(14). doi:10.1002/adem.202201850
apa: Pramanik, S., Milaege, D., Hein, M., Andreiev, A., Schaper, M., & Hoyer,
K.-P. (2023). An Experimental and Computational Modeling Study on Additively Manufactured
Micro‐Architectured Ti–24Nb–4Zr–8Sn Hollow‐Strut Lattice Structures. Advanced
Engineering Materials, 25(14). https://doi.org/10.1002/adem.202201850
bibtex: '@article{Pramanik_Milaege_Hein_Andreiev_Schaper_Hoyer_2023, title={An Experimental
and Computational Modeling Study on Additively Manufactured Micro‐Architectured
Ti–24Nb–4Zr–8Sn Hollow‐Strut Lattice Structures}, volume={25}, DOI={10.1002/adem.202201850},
number={14}, journal={Advanced Engineering Materials}, publisher={Wiley}, author={Pramanik,
Sudipta and Milaege, Dennis and Hein, Maxwell and Andreiev, Anatolii and Schaper,
Mirko and Hoyer, Kay-Peter}, year={2023} }'
chicago: Pramanik, Sudipta, Dennis Milaege, Maxwell Hein, Anatolii Andreiev, Mirko
Schaper, and Kay-Peter Hoyer. “An Experimental and Computational Modeling Study
on Additively Manufactured Micro‐Architectured Ti–24Nb–4Zr–8Sn Hollow‐Strut Lattice
Structures.” Advanced Engineering Materials 25, no. 14 (2023). https://doi.org/10.1002/adem.202201850.
ieee: 'S. Pramanik, D. Milaege, M. Hein, A. Andreiev, M. Schaper, and K.-P. Hoyer,
“An Experimental and Computational Modeling Study on Additively Manufactured Micro‐Architectured
Ti–24Nb–4Zr–8Sn Hollow‐Strut Lattice Structures,” Advanced Engineering Materials,
vol. 25, no. 14, 2023, doi: 10.1002/adem.202201850.'
mla: Pramanik, Sudipta, et al. “An Experimental and Computational Modeling Study
on Additively Manufactured Micro‐Architectured Ti–24Nb–4Zr–8Sn Hollow‐Strut Lattice
Structures.” Advanced Engineering Materials, vol. 25, no. 14, Wiley, 2023,
doi:10.1002/adem.202201850.
short: S. Pramanik, D. Milaege, M. Hein, A. Andreiev, M. Schaper, K.-P. Hoyer, Advanced
Engineering Materials 25 (2023).
date_created: 2023-08-16T06:27:19Z
date_updated: 2023-08-16T06:29:36Z
department:
- _id: '9'
- _id: '158'
doi: 10.1002/adem.202201850
intvolume: ' 25'
issue: '14'
keyword:
- Condensed Matter Physics
- General Materials Science
language:
- iso: eng
publication: Advanced Engineering Materials
publication_identifier:
issn:
- 1438-1656
- 1527-2648
publication_status: published
publisher: Wiley
quality_controlled: '1'
status: public
title: An Experimental and Computational Modeling Study on Additively Manufactured
Micro‐Architectured Ti–24Nb–4Zr–8Sn Hollow‐Strut Lattice Structures
type: journal_article
user_id: '48411'
volume: 25
year: '2023'
...
---
_id: '46504'
author:
- first_name: Anatolii
full_name: Andreiev, Anatolii
last_name: Andreiev
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
last_name: Hoyer
- first_name: Florian
full_name: Hengsbach, Florian
last_name: Hengsbach
- first_name: Michael
full_name: Haase, Michael
last_name: Haase
- first_name: Mirko
full_name: Schaper, Mirko
last_name: Schaper
citation:
ama: 'Andreiev A, Hoyer K-P, Hengsbach F, Haase M, Schaper M. Powder Bed Fusion
of Soft-Magnetic Iron-Silicon-Based Alloys: Advantages and Challenges. Published
online 2023. doi:10.2139/ssrn.4369485'
apa: 'Andreiev, A., Hoyer, K.-P., Hengsbach, F., Haase, M., & Schaper, M. (2023).
Powder Bed Fusion of Soft-Magnetic Iron-Silicon-Based Alloys: Advantages and
Challenges. Elsevier BV. https://doi.org/10.2139/ssrn.4369485'
bibtex: '@article{Andreiev_Hoyer_Hengsbach_Haase_Schaper_2023, title={Powder Bed
Fusion of Soft-Magnetic Iron-Silicon-Based Alloys: Advantages and Challenges},
DOI={10.2139/ssrn.4369485},
publisher={Elsevier BV}, author={Andreiev, Anatolii and Hoyer, Kay-Peter and Hengsbach,
Florian and Haase, Michael and Schaper, Mirko}, year={2023} }'
chicago: 'Andreiev, Anatolii, Kay-Peter Hoyer, Florian Hengsbach, Michael Haase,
and Mirko Schaper. “Powder Bed Fusion of Soft-Magnetic Iron-Silicon-Based Alloys:
Advantages and Challenges.” Elsevier BV, 2023. https://doi.org/10.2139/ssrn.4369485.'
ieee: 'A. Andreiev, K.-P. Hoyer, F. Hengsbach, M. Haase, and M. Schaper, “Powder
Bed Fusion of Soft-Magnetic Iron-Silicon-Based Alloys: Advantages and Challenges.”
Elsevier BV, 2023, doi: 10.2139/ssrn.4369485.'
mla: 'Andreiev, Anatolii, et al. Powder Bed Fusion of Soft-Magnetic Iron-Silicon-Based
Alloys: Advantages and Challenges. Elsevier BV, 2023, doi:10.2139/ssrn.4369485.'
short: A. Andreiev, K.-P. Hoyer, F. Hengsbach, M. Haase, M. Schaper, (2023).
date_created: 2023-08-16T06:22:47Z
date_updated: 2023-08-16T06:29:44Z
department:
- _id: '9'
- _id: '158'
doi: 10.2139/ssrn.4369485
publication_status: published
publisher: Elsevier BV
status: public
title: 'Powder Bed Fusion of Soft-Magnetic Iron-Silicon-Based Alloys: Advantages and
Challenges'
type: preprint
user_id: '48411'
year: '2023'
...
---
_id: '46514'
abstract:
- lang: eng
text: "Purpose: Data integration and applications across knowledge graphs (KGs)
rely heavily on the discovery of links between resources within these KGs. Geospatial
link discovery algorithms have to deal with millions of point sets containing
billions of points. \r\nMethodology: To speed up the discovery of geospatial links,
we propose COBALT. COBALT combines the content measures with R-tree indexing.
The content measures are based on the area, diagonal and distance of the minimum
bounding boxes of the polygons which speeds up the process but is not perfectly
accurate. We thus propose two polygon splitting approaches for improving the accuracy
of COBALT. \r\nFindings: Our experiments on real-world datasets show that COBALT
is able to speed up the topological relation discovery over geospatial KGs by
up to 1.47 × 104 times over state-of-the-art linking algorithms while maintaining
an F-Measure between 0.7 and 0.9 depending on the relation. Furthermore, we were
able to achieve an F-Measure of up to 0.99 by applying our polygon splitting approaches
before applying the content measures. \r\nValue: The process of discovering links
between geospatial resources can be significantly faster by sacrificing the optimality
of the results. This is especially important for real time data-driven applications
such as emergency response, location-based services and traffic management. In
future work, additional measures, like the location of polygons or the name of
the entity represented by the polygon, could be integrated to further improve
the accuracy of the results."
author:
- first_name: Alexander
full_name: Becker, Alexander
last_name: Becker
- first_name: Abdullah Fathi Ahmed
full_name: Ahmed, Abdullah Fathi Ahmed
id: '29670'
last_name: Ahmed
- first_name: Mohamed
full_name: Sherif, Mohamed
id: '67234'
last_name: Sherif
orcid: https://orcid.org/0000-0002-9927-2203
- first_name: Axel-Cyrille
full_name: Ngonga Ngomo, Axel-Cyrille
id: '65716'
last_name: Ngonga Ngomo
citation:
ama: 'Becker A, Ahmed AFA, Sherif M, Ngonga Ngomo A-C. COBALT: A Content-Based Similarity
Approach for Link Discovery over Geospatial Knowledge Graphs. In: SEMANTiCS.
; 2023.'
apa: 'Becker, A., Ahmed, A. F. A., Sherif, M., & Ngonga Ngomo, A.-C. (2023).
COBALT: A Content-Based Similarity Approach for Link Discovery over Geospatial
Knowledge Graphs. SEMANTiCS. SEMANTiCS 2023, Leipzig, Germany.'
bibtex: '@inproceedings{Becker_Ahmed_Sherif_Ngonga Ngomo_2023, title={COBALT: A
Content-Based Similarity Approach for Link Discovery over Geospatial Knowledge
Graphs}, booktitle={SEMANTiCS}, author={Becker, Alexander and Ahmed, Abdullah
Fathi Ahmed and Sherif, Mohamed and Ngonga Ngomo, Axel-Cyrille}, year={2023} }'
chicago: 'Becker, Alexander, Abdullah Fathi Ahmed Ahmed, Mohamed Sherif, and Axel-Cyrille
Ngonga Ngomo. “COBALT: A Content-Based Similarity Approach for Link Discovery
over Geospatial Knowledge Graphs.” In SEMANTiCS, 2023.'
ieee: 'A. Becker, A. F. A. Ahmed, M. Sherif, and A.-C. Ngonga Ngomo, “COBALT: A
Content-Based Similarity Approach for Link Discovery over Geospatial Knowledge
Graphs,” presented at the SEMANTiCS 2023, Leipzig, Germany, 2023.'
mla: 'Becker, Alexander, et al. “COBALT: A Content-Based Similarity Approach for
Link Discovery over Geospatial Knowledge Graphs.” SEMANTiCS, 2023.'
short: 'A. Becker, A.F.A. Ahmed, M. Sherif, A.-C. Ngonga Ngomo, in: SEMANTiCS, 2023.'
conference:
end_date: 2023-09-23
location: Leipzig, Germany
name: SEMANTiCS 2023
start_date: 2023-09-20
date_created: 2023-08-16T08:55:23Z
date_updated: 2023-08-16T09:04:20Z
keyword:
- ahmed becker dice ngonga sail sherif
language:
- iso: eng
publication: SEMANTiCS
status: public
title: 'COBALT: A Content-Based Similarity Approach for Link Discovery over Geospatial
Knowledge Graphs'
type: conference
user_id: '67234'
year: '2023'
...
---
_id: '46517'
author:
- first_name: Abdullah Fathi
full_name: Ahmed, Abdullah Fathi
last_name: Ahmed
- first_name: Mohamed Ahmed
full_name: Sherif, Mohamed Ahmed
last_name: Sherif
- first_name: Axel-Cyrille Ngonga
full_name: Ngomo, Axel-Cyrille Ngonga
last_name: Ngomo
citation:
ama: 'Ahmed AF, Sherif MA, Ngomo A-CN. NELLIE: Never-Ending Linking for Linked Open
Data. IEEE Access. Published online 2023:1-1. doi:10.1109/access.2023.3300694'
apa: 'Ahmed, A. F., Sherif, M. A., & Ngomo, A.-C. N. (2023). NELLIE: Never-Ending
Linking for Linked Open Data. IEEE Access, 1–1. https://doi.org/10.1109/access.2023.3300694'
bibtex: '@article{Ahmed_Sherif_Ngomo_2023, title={NELLIE: Never-Ending Linking for
Linked Open Data}, DOI={10.1109/access.2023.3300694},
journal={IEEE Access}, publisher={Institute of Electrical and Electronics Engineers
(IEEE)}, author={Ahmed, Abdullah Fathi and Sherif, Mohamed Ahmed and Ngomo, Axel-Cyrille
Ngonga}, year={2023}, pages={1–1} }'
chicago: 'Ahmed, Abdullah Fathi, Mohamed Ahmed Sherif, and Axel-Cyrille Ngonga Ngomo.
“NELLIE: Never-Ending Linking for Linked Open Data.” IEEE Access, 2023,
1–1. https://doi.org/10.1109/access.2023.3300694.'
ieee: 'A. F. Ahmed, M. A. Sherif, and A.-C. N. Ngomo, “NELLIE: Never-Ending Linking
for Linked Open Data,” IEEE Access, pp. 1–1, 2023, doi: 10.1109/access.2023.3300694.'
mla: 'Ahmed, Abdullah Fathi, et al. “NELLIE: Never-Ending Linking for Linked Open
Data.” IEEE Access, Institute of Electrical and Electronics Engineers (IEEE),
2023, pp. 1–1, doi:10.1109/access.2023.3300694.'
short: A.F. Ahmed, M.A. Sherif, A.-C.N. Ngomo, IEEE Access (2023) 1–1.
date_created: 2023-08-16T08:57:39Z
date_updated: 2023-08-16T09:03:52Z
doi: 10.1109/access.2023.3300694
keyword:
- General Engineering
- General Materials Science
- General Computer Science
- Electrical and Electronic Engineering
page: 1-1
publication: IEEE Access
publication_identifier:
issn:
- 2169-3536
publication_status: published
publisher: Institute of Electrical and Electronics Engineers (IEEE)
status: public
title: 'NELLIE: Never-Ending Linking for Linked Open Data'
type: journal_article
user_id: '67234'
year: '2023'
...
---
_id: '46518'
abstract:
- lang: eng
text: "Purpose: This study addresses the limitations of current short abstracts
of DBpedia entities, which often lack a comprehensive overview due to their creating
method (i.e., selecting the first two-three sentences from the full DBpedia abstracts).\r\nMethodology:
We leverage pre-trained language models to generate abstractive summaries of DBpedia
abstracts in six languages (English, French, German, Italian, Spanish, and Dutch).
We performed several experiments to assess the quality of generated summaries
by language models. In particular, we evaluated the generated summaries using
human judgments and automated metrics (Self-ROUGE and BERTScore). Additionally,
we studied the correlation between human judgments and automated metrics in evaluating
the generated summaries under different aspects: informativeness, coherence, conciseness,
and fluency.\r\nFindings: Pre-trained language models generate summaries more
concise and informative than existing short abstracts. Specifically, BART-based
models effectively overcome the limitations of DBpedia short abstracts, especially
for longer ones.\r\nMoreover, we show that BERTScore and ROUGE-1 are reliable
metrics for assessing the informativeness and coherence of the generated summaries
with respect to the full DBpedia abstracts. We also find a negative correlation
between conciseness and human ratings. Furthermore, fluency evaluation remains
challenging without human judgment.\r\nValue: This study has significant implications
for various applications in machine learning and natural language processing that
rely on DBpedia resources. By providing succinct and comprehensive summaries,
our approach enhances the quality of DBpedia abstracts and contributes to the
semantic web community"
author:
- first_name: Hamada Mohamed Abdelsamee
full_name: Zahera, Hamada Mohamed Abdelsamee
id: '72768'
last_name: Zahera
orcid: 0000-0003-0215-1278
- first_name: Fedor
full_name: Vitiugin, Fedor
last_name: Vitiugin
- first_name: Mohamed
full_name: Sherif, Mohamed
id: '67234'
last_name: Sherif
orcid: https://orcid.org/0000-0002-9927-2203
- first_name: Carlos
full_name: Castillo, Carlos
last_name: Castillo
- first_name: Axel-Cyrille
full_name: Ngonga Ngomo, Axel-Cyrille
id: '65716'
last_name: Ngonga Ngomo
citation:
ama: 'Zahera HMA, Vitiugin F, Sherif M, Castillo C, Ngonga Ngomo A-C. Using Pre-trained
Language Models for Abstractive DBpedia Summarization: A Comparative Study. In:
SEMANTiCS. ; 2023.'
apa: 'Zahera, H. M. A., Vitiugin, F., Sherif, M., Castillo, C., & Ngonga Ngomo,
A.-C. (2023). Using Pre-trained Language Models for Abstractive DBpedia Summarization:
A Comparative Study. SEMANTiCS. SEMANTiCS 2023, Leipzig, Germany.'
bibtex: '@inproceedings{Zahera_Vitiugin_Sherif_Castillo_Ngonga Ngomo_2023, title={Using
Pre-trained Language Models for Abstractive DBpedia Summarization: A Comparative
Study}, booktitle={SEMANTiCS}, author={Zahera, Hamada Mohamed Abdelsamee and Vitiugin,
Fedor and Sherif, Mohamed and Castillo, Carlos and Ngonga Ngomo, Axel-Cyrille},
year={2023} }'
chicago: 'Zahera, Hamada Mohamed Abdelsamee, Fedor Vitiugin, Mohamed Sherif, Carlos
Castillo, and Axel-Cyrille Ngonga Ngomo. “Using Pre-Trained Language Models for
Abstractive DBpedia Summarization: A Comparative Study.” In SEMANTiCS,
2023.'
ieee: 'H. M. A. Zahera, F. Vitiugin, M. Sherif, C. Castillo, and A.-C. Ngonga Ngomo,
“Using Pre-trained Language Models for Abstractive DBpedia Summarization: A Comparative
Study,” presented at the SEMANTiCS 2023, Leipzig, Germany, 2023.'
mla: 'Zahera, Hamada Mohamed Abdelsamee, et al. “Using Pre-Trained Language Models
for Abstractive DBpedia Summarization: A Comparative Study.” SEMANTiCS,
2023.'
short: 'H.M.A. Zahera, F. Vitiugin, M. Sherif, C. Castillo, A.-C. Ngonga Ngomo,
in: SEMANTiCS, 2023.'
conference:
end_date: 2023-09-23
location: Leipzig, Germany
name: SEMANTiCS 2023
start_date: 2023-09-20
date_created: 2023-08-16T08:58:12Z
date_updated: 2023-08-16T10:09:29Z
keyword:
- dice enexa kiam ngonga porque sherif zahera
language:
- iso: eng
publication: SEMANTiCS
status: public
title: 'Using Pre-trained Language Models for Abstractive DBpedia Summarization: A
Comparative Study'
type: conference
user_id: '67234'
year: '2023'
...
---
_id: '45558'
abstract:
- lang: eng
text: Graffiti is an urban phenomenon that is increasingly attracting the interest
of the sciences. To the best of our knowledge, no suitable data corpora are available
for systematic research until now. The Information System Graffiti in Germany
project (Ingrid) closes this gap by dealing with graffiti image collections that
have been made available to the project for public use. Within Ingrid, the graffiti
images are collected, digitized and annotated. With this work, we aim to support
the rapid access to a comprehensive data source on Ingrid targeted especially
by researchers. In particular, we present IngridKG, an RDF knowledge graph of
annotated graffiti, abides by the Linked Data and FAIR principles. We weekly update
IngridKG by augmenting the new annotated graffiti to our knowledge graph. Our
generation pipeline applies RDF data conversion, link discovery and data fusion
approaches to the original data. The current version of IngridKG contains 460,640,154
triples and is linked to 3 other knowledge graphs by over 200,000 links. In our
use case studies, we demonstrate the usefulness of our knowledge graph for different
applications.
author:
- first_name: Mohamed
full_name: Sherif, Mohamed
id: '67234'
last_name: Sherif
orcid: https://orcid.org/0000-0002-9927-2203
- first_name: Ana Alexandra
full_name: Morim da Silva, Ana Alexandra
last_name: Morim da Silva
- first_name: Svetlana
full_name: Pestryakova, Svetlana
last_name: Pestryakova
- first_name: Abdullah Fathi Ahmed
full_name: Ahmed, Abdullah Fathi Ahmed
id: '29670'
last_name: Ahmed
- first_name: Sven
full_name: Niemann, Sven
id: '6593'
last_name: Niemann
- first_name: Axel-Cyrille
full_name: Ngonga Ngomo, Axel-Cyrille
id: '65716'
last_name: Ngonga Ngomo
citation:
ama: 'Sherif M, Morim da Silva AA, Pestryakova S, Ahmed AFA, Niemann S, Ngonga Ngomo
A-C. IngridKG: A FAIR Knowledge Graph of Graffiti. LibreCat University;
2023. doi:10.5281/ZENODO.7560242'
apa: 'Sherif, M., Morim da Silva, A. A., Pestryakova, S., Ahmed, A. F. A., Niemann,
S., & Ngonga Ngomo, A.-C. (2023). IngridKG: A FAIR Knowledge Graph of Graffiti.
LibreCat University. https://doi.org/10.5281/ZENODO.7560242'
bibtex: '@book{Sherif_Morim da Silva_Pestryakova_Ahmed_Niemann_Ngonga Ngomo_2023,
title={IngridKG: A FAIR Knowledge Graph of Graffiti}, DOI={10.5281/ZENODO.7560242},
publisher={LibreCat University}, author={Sherif, Mohamed and Morim da Silva, Ana
Alexandra and Pestryakova, Svetlana and Ahmed, Abdullah Fathi Ahmed and Niemann,
Sven and Ngonga Ngomo, Axel-Cyrille}, year={2023} }'
chicago: 'Sherif, Mohamed, Ana Alexandra Morim da Silva, Svetlana Pestryakova, Abdullah
Fathi Ahmed Ahmed, Sven Niemann, and Axel-Cyrille Ngonga Ngomo. IngridKG: A
FAIR Knowledge Graph of Graffiti. LibreCat University, 2023. https://doi.org/10.5281/ZENODO.7560242.'
ieee: 'M. Sherif, A. A. Morim da Silva, S. Pestryakova, A. F. A. Ahmed, S. Niemann,
and A.-C. Ngonga Ngomo, IngridKG: A FAIR Knowledge Graph of Graffiti. LibreCat
University, 2023.'
mla: 'Sherif, Mohamed, et al. IngridKG: A FAIR Knowledge Graph of Graffiti.
LibreCat University, 2023, doi:10.5281/ZENODO.7560242.'
short: 'M. Sherif, A.A. Morim da Silva, S. Pestryakova, A.F.A. Ahmed, S. Niemann,
A.-C. Ngonga Ngomo, IngridKG: A FAIR Knowledge Graph of Graffiti, LibreCat University,
2023.'
date_created: 2023-06-09T10:09:34Z
date_updated: 2023-08-16T10:23:55Z
department:
- _id: '34'
doi: 10.5281/ZENODO.7560242
project:
- _id: '104'
grant_number: '289287267'
name: 'INGRID: INGRID: Informationssystem Graffiti in Deutschland'
publisher: LibreCat University
status: public
title: 'IngridKG: A FAIR Knowledge Graph of Graffiti'
type: research_data
user_id: '67234'
year: '2023'
...
---
_id: '46542'
abstract:
- lang: eng
text: Multiprotein adsorption from complex body fluids represents a highly
important and complicated phenomenon in medicine. In this work, multiprotein adsorption
from diluted human serum at gold and oxidized iron surfaces is investigated at
different serum concentrations and pH values. Adsorption-induced changes in surface
topography and the total amount of adsorbed proteins are quantified by atomic
force microscopy (AFM) and polarization-modulation infrared reflection absorption
spectroscopy (PM-IRRAS), respectively. For both surfaces, stronger protein adsorption
is observed at pH 6 compared to pH 7 and pH 8. PM-IRRAS furthermore provides some
qualitative insights into the pH-dependent alterations in the composition of the
adsorbed multiprotein films. Changes in the amide II/amide I band area ratio and
in particular side-chain IR absorption suggest that the increased adsorption at
pH 6 is accompanied by a change in protein film composition. Presumably, this
is mostly driven by the adsorption of human serum albumin, which at pH 6 adsorbs
more readily and thereby replaces other proteins with lower surface affinities
in the resulting multiprotein film.
article_number: '6060'
author:
- first_name: Jingyuan
full_name: Huang, Jingyuan
last_name: Huang
- first_name: Yunshu
full_name: Qiu, Yunshu
last_name: Qiu
- first_name: Felix
full_name: Lücke, Felix
last_name: Lücke
- first_name: Jiangling
full_name: Su, Jiangling
last_name: Su
- first_name: Guido
full_name: Grundmeier, Guido
id: '194'
last_name: Grundmeier
- first_name: Adrian
full_name: Keller, Adrian
id: '48864'
last_name: Keller
orcid: 0000-0001-7139-3110
citation:
ama: Huang J, Qiu Y, Lücke F, Su J, Grundmeier G, Keller A. Multiprotein Adsorption
from Human Serum at Gold and Oxidized Iron Surfaces Studied by Atomic Force Microscopy
and Polarization-Modulation Infrared Reflection Absorption Spectroscopy. Molecules.
2023;28(16). doi:10.3390/molecules28166060
apa: Huang, J., Qiu, Y., Lücke, F., Su, J., Grundmeier, G., & Keller, A. (2023).
Multiprotein Adsorption from Human Serum at Gold and Oxidized Iron Surfaces Studied
by Atomic Force Microscopy and Polarization-Modulation Infrared Reflection Absorption
Spectroscopy. Molecules, 28(16), Article 6060. https://doi.org/10.3390/molecules28166060
bibtex: '@article{Huang_Qiu_Lücke_Su_Grundmeier_Keller_2023, title={Multiprotein
Adsorption from Human Serum at Gold and Oxidized Iron Surfaces Studied by Atomic
Force Microscopy and Polarization-Modulation Infrared Reflection Absorption Spectroscopy},
volume={28}, DOI={10.3390/molecules28166060},
number={166060}, journal={Molecules}, publisher={MDPI AG}, author={Huang, Jingyuan
and Qiu, Yunshu and Lücke, Felix and Su, Jiangling and Grundmeier, Guido and Keller,
Adrian}, year={2023} }'
chicago: Huang, Jingyuan, Yunshu Qiu, Felix Lücke, Jiangling Su, Guido Grundmeier,
and Adrian Keller. “Multiprotein Adsorption from Human Serum at Gold and Oxidized
Iron Surfaces Studied by Atomic Force Microscopy and Polarization-Modulation Infrared
Reflection Absorption Spectroscopy.” Molecules 28, no. 16 (2023). https://doi.org/10.3390/molecules28166060.
ieee: 'J. Huang, Y. Qiu, F. Lücke, J. Su, G. Grundmeier, and A. Keller, “Multiprotein
Adsorption from Human Serum at Gold and Oxidized Iron Surfaces Studied by Atomic
Force Microscopy and Polarization-Modulation Infrared Reflection Absorption Spectroscopy,”
Molecules, vol. 28, no. 16, Art. no. 6060, 2023, doi: 10.3390/molecules28166060.'
mla: Huang, Jingyuan, et al. “Multiprotein Adsorption from Human Serum at Gold and
Oxidized Iron Surfaces Studied by Atomic Force Microscopy and Polarization-Modulation
Infrared Reflection Absorption Spectroscopy.” Molecules, vol. 28, no. 16,
6060, MDPI AG, 2023, doi:10.3390/molecules28166060.
short: J. Huang, Y. Qiu, F. Lücke, J. Su, G. Grundmeier, A. Keller, Molecules 28
(2023).
date_created: 2023-08-16T10:51:48Z
date_updated: 2023-08-16T10:53:08Z
department:
- _id: '302'
doi: 10.3390/molecules28166060
intvolume: ' 28'
issue: '16'
keyword:
- Chemistry (miscellaneous)
- Analytical Chemistry
- Organic Chemistry
- Physical and Theoretical Chemistry
- Molecular Medicine
- Drug Discovery
- Pharmaceutical Science
language:
- iso: eng
publication: Molecules
publication_identifier:
issn:
- 1420-3049
publication_status: published
publisher: MDPI AG
status: public
title: Multiprotein Adsorption from Human Serum at Gold and Oxidized Iron Surfaces
Studied by Atomic Force Microscopy and Polarization-Modulation Infrared Reflection
Absorption Spectroscopy
type: journal_article
user_id: '48864'
volume: 28
year: '2023'
...
---
_id: '46543'
abstract:
- lang: eng
text: The influence of nanoscale surface topography on protein adsorption
is highly important for numerous applications in medicine and technology. Herein,
ferritin adsorption at flat and nanofaceted, single-crystalline Al2O3 surfaces
is investigated using atomic force microscopy and X-ray photoelectron spectroscopy.
The nanofaceted surfaces are generated by the thermal annealing of Al2O3 wafers
at temperatures above 1000 °C, which leads to the formation of faceted saw-tooth-like
surface topographies with periodicities of about 160 nm and amplitudes of about
15 nm. Ferritin adsorption at these nanofaceted surfaces is notably suppressed
compared to the flat surface at a concentration of 10 mg/mL, which is attributed
to lower adsorption affinities of the newly formed facets. Consequently, adsorption
is restricted mostly to the pattern grooves, where the proteins can maximize their
contact area with the surface. However, this effect depends on the protein concentration,
with an inverse trend being observed at 30 mg/mL. Furthermore, different ferritin
adsorption behavior is observed at topographically similar nanofacet patterns
fabricated at different annealing temperatures and attributed to different step
and kink densities. These results demonstrate that while protein adsorption at
solid surfaces can be notably affected by nanofacet patterns, fine-tuning protein
adsorption in this way requires the precise control of facet properties.
article_number: '12808'
author:
- first_name: Bhanu K.
full_name: Pothineni, Bhanu K.
last_name: Pothineni
- first_name: Sabrina
full_name: Kollmann, Sabrina
last_name: Kollmann
- first_name: Xinyang
full_name: Li, Xinyang
last_name: Li
- first_name: Guido
full_name: Grundmeier, Guido
id: '194'
last_name: Grundmeier
- first_name: Denise J.
full_name: Erb, Denise J.
last_name: Erb
- first_name: Adrian
full_name: Keller, Adrian
id: '48864'
last_name: Keller
orcid: 0000-0001-7139-3110
citation:
ama: Pothineni BK, Kollmann S, Li X, Grundmeier G, Erb DJ, Keller A. Adsorption
of Ferritin at Nanofaceted Al2O3 Surfaces. International Journal of Molecular
Sciences. 2023;24(16). doi:10.3390/ijms241612808
apa: Pothineni, B. K., Kollmann, S., Li, X., Grundmeier, G., Erb, D. J., & Keller,
A. (2023). Adsorption of Ferritin at Nanofaceted Al2O3 Surfaces. International
Journal of Molecular Sciences, 24(16), Article 12808. https://doi.org/10.3390/ijms241612808
bibtex: '@article{Pothineni_Kollmann_Li_Grundmeier_Erb_Keller_2023, title={Adsorption
of Ferritin at Nanofaceted Al2O3 Surfaces}, volume={24}, DOI={10.3390/ijms241612808},
number={1612808}, journal={International Journal of Molecular Sciences}, publisher={MDPI
AG}, author={Pothineni, Bhanu K. and Kollmann, Sabrina and Li, Xinyang and Grundmeier,
Guido and Erb, Denise J. and Keller, Adrian}, year={2023} }'
chicago: Pothineni, Bhanu K., Sabrina Kollmann, Xinyang Li, Guido Grundmeier, Denise
J. Erb, and Adrian Keller. “Adsorption of Ferritin at Nanofaceted Al2O3 Surfaces.”
International Journal of Molecular Sciences 24, no. 16 (2023). https://doi.org/10.3390/ijms241612808.
ieee: 'B. K. Pothineni, S. Kollmann, X. Li, G. Grundmeier, D. J. Erb, and A. Keller,
“Adsorption of Ferritin at Nanofaceted Al2O3 Surfaces,” International Journal
of Molecular Sciences, vol. 24, no. 16, Art. no. 12808, 2023, doi: 10.3390/ijms241612808.'
mla: Pothineni, Bhanu K., et al. “Adsorption of Ferritin at Nanofaceted Al2O3 Surfaces.”
International Journal of Molecular Sciences, vol. 24, no. 16, 12808, MDPI
AG, 2023, doi:10.3390/ijms241612808.
short: B.K. Pothineni, S. Kollmann, X. Li, G. Grundmeier, D.J. Erb, A. Keller, International
Journal of Molecular Sciences 24 (2023).
date_created: 2023-08-16T10:52:25Z
date_updated: 2023-08-16T10:53:00Z
department:
- _id: '302'
doi: 10.3390/ijms241612808
intvolume: ' 24'
issue: '16'
keyword:
- Inorganic Chemistry
- Organic Chemistry
- Physical and Theoretical Chemistry
- Computer Science Applications
- Spectroscopy
- Molecular Biology
- General Medicine
- Catalysis
language:
- iso: eng
publication: International Journal of Molecular Sciences
publication_identifier:
issn:
- 1422-0067
publication_status: published
publisher: MDPI AG
status: public
title: Adsorption of Ferritin at Nanofaceted Al2O3 Surfaces
type: journal_article
user_id: '48864'
volume: 24
year: '2023'
...
---
_id: '46459'
author:
- first_name: N’Dah Jean
full_name: Kouagou, N’Dah Jean
last_name: Kouagou
- first_name: Stefan
full_name: Heindorf, Stefan
last_name: Heindorf
- first_name: Caglar
full_name: Demir, Caglar
last_name: Demir
- first_name: Axel-Cyrille Ngonga
full_name: Ngomo, Axel-Cyrille Ngonga
last_name: Ngomo
citation:
ama: 'Kouagou NJ, Heindorf S, Demir C, Ngomo A-CN. Neural Class Expression Synthesis
(Extended Abstract). In: NeSy. Vol 3432. CEUR Workshop Proceedings. CEUR-WS.org;
2023:430–431.'
apa: Kouagou, N. J., Heindorf, S., Demir, C., & Ngomo, A.-C. N. (2023). Neural
Class Expression Synthesis (Extended Abstract). NeSy, 3432, 430–431.
bibtex: '@inproceedings{Kouagou_Heindorf_Demir_Ngomo_2023, series={CEUR Workshop
Proceedings}, title={Neural Class Expression Synthesis (Extended Abstract)}, volume={3432},
booktitle={NeSy}, publisher={CEUR-WS.org}, author={Kouagou, N’Dah Jean and Heindorf,
Stefan and Demir, Caglar and Ngomo, Axel-Cyrille Ngonga}, year={2023}, pages={430–431},
collection={CEUR Workshop Proceedings} }'
chicago: Kouagou, N’Dah Jean, Stefan Heindorf, Caglar Demir, and Axel-Cyrille Ngonga
Ngomo. “Neural Class Expression Synthesis (Extended Abstract).” In NeSy,
3432:430–431. CEUR Workshop Proceedings. CEUR-WS.org, 2023.
ieee: N. J. Kouagou, S. Heindorf, C. Demir, and A.-C. N. Ngomo, “Neural Class Expression
Synthesis (Extended Abstract),” in NeSy, 2023, vol. 3432, pp. 430–431.
mla: Kouagou, N’Dah Jean, et al. “Neural Class Expression Synthesis (Extended Abstract).”
NeSy, vol. 3432, CEUR-WS.org, 2023, pp. 430–431.
short: 'N.J. Kouagou, S. Heindorf, C. Demir, A.-C.N. Ngomo, in: NeSy, CEUR-WS.org,
2023, pp. 430–431.'
date_created: 2023-08-08T11:46:27Z
date_updated: 2023-08-16T11:04:23Z
intvolume: ' 3432'
language:
- iso: eng
page: 430–431
publication: NeSy
publisher: CEUR-WS.org
series_title: CEUR Workshop Proceedings
status: public
title: Neural Class Expression Synthesis (Extended Abstract)
type: conference
user_id: '87189'
volume: 3432
year: '2023'
...