---
_id: '44255'
author:
- first_name: Felix
full_name: Behler, Felix
id: '50527'
last_name: Behler
citation:
ama: 'Behler F. The Battle for the English Landscape’ - Über die gedankliche Konzeptionierung
des Englischen Landschaftsgartens. In: Barockwerkstatt 2021. Organisation:
Professor Sabine Meine (Hochschule Für Musik Und Tanz Köln). ; 2021.'
apa: 'Behler, F. (2021). The Battle for the English Landscape’ - Über die gedankliche
Konzeptionierung des Englischen Landschaftsgartens. Barockwerkstatt 2021. Organisation:
Professor Sabine Meine (Hochschule Für Musik Und Tanz Köln). Barockwerkstatt
2021, Köln - Gastvortrag.'
bibtex: '@inproceedings{Behler_2021, title={The Battle for the English Landscape’
- Über die gedankliche Konzeptionierung des Englischen Landschaftsgartens}, booktitle={Barockwerkstatt
2021. Organisation: Professor Sabine Meine (Hochschule für Musik und Tanz Köln)},
author={Behler, Felix}, year={2021} }'
chicago: 'Behler, Felix. “The Battle for the English Landscape’ - Über Die Gedankliche
Konzeptionierung Des Englischen Landschaftsgartens.” In Barockwerkstatt 2021.
Organisation: Professor Sabine Meine (Hochschule Für Musik Und Tanz Köln),
2021.'
ieee: F. Behler, “The Battle for the English Landscape’ - Über die gedankliche Konzeptionierung
des Englischen Landschaftsgartens,” presented at the Barockwerkstatt 2021, Köln
- Gastvortrag, 2021.
mla: 'Behler, Felix. “The Battle for the English Landscape’ - Über Die Gedankliche
Konzeptionierung Des Englischen Landschaftsgartens.” Barockwerkstatt 2021.
Organisation: Professor Sabine Meine (Hochschule Für Musik Und Tanz Köln),
2021.'
short: 'F. Behler, in: Barockwerkstatt 2021. Organisation: Professor Sabine Meine
(Hochschule Für Musik Und Tanz Köln), 2021.'
conference:
end_date: 2021.05.26
location: Köln - Gastvortrag
name: Barockwerkstatt 2021
start_date: 2021.05.25
date_created: 2023-04-28T07:26:58Z
date_updated: 2023-04-28T07:31:43Z
language:
- iso: eng
publication: 'Barockwerkstatt 2021. Organisation: Professor Sabine Meine (Hochschule
für Musik und Tanz Köln)'
status: public
title: The Battle for the English Landscape’ - Über die gedankliche Konzeptionierung
des Englischen Landschaftsgartens
type: conference
user_id: '50527'
year: '2021'
...
---
_id: '44253'
author:
- first_name: Felix
full_name: Behler, Felix
id: '50527'
last_name: Behler
citation:
ama: 'Behler F. Of Transgenerational Borders and Collective Trauma. In: Somewhere
In Between: Borders and Borderlands. Organisation: London Centre for Interdisciplinary
Research. ; 2021.'
apa: 'Behler, F. (2021). Of Transgenerational Borders and Collective Trauma. Somewhere
In Between: Borders and Borderlands. Organisation: London Centre for Interdisciplinary
Research. Somewhere In Between: Borders and Borderlands, London (Online).'
bibtex: '@inproceedings{Behler_2021, title={Of Transgenerational Borders and Collective
Trauma}, booktitle={Somewhere In Between: Borders and Borderlands. Organisation:
London Centre for Interdisciplinary Research}, author={Behler, Felix}, year={2021}
}'
chicago: 'Behler, Felix. “Of Transgenerational Borders and Collective Trauma.” In
Somewhere In Between: Borders and Borderlands. Organisation: London Centre
for Interdisciplinary Research, 2021.'
ieee: 'F. Behler, “Of Transgenerational Borders and Collective Trauma,” presented
at the Somewhere In Between: Borders and Borderlands, London (Online), 2021.'
mla: 'Behler, Felix. “Of Transgenerational Borders and Collective Trauma.” Somewhere
In Between: Borders and Borderlands. Organisation: London Centre for Interdisciplinary
Research, 2021.'
short: 'F. Behler, in: Somewhere In Between: Borders and Borderlands. Organisation:
London Centre for Interdisciplinary Research, 2021.'
conference:
end_date: 2021.04.25
location: London (Online)
name: 'Somewhere In Between: Borders and Borderlands'
start_date: 2021.04.24
date_created: 2023-04-28T07:22:14Z
date_updated: 2023-04-28T07:22:34Z
language:
- iso: eng
publication: 'Somewhere In Between: Borders and Borderlands. Organisation: London
Centre for Interdisciplinary Research'
status: public
title: Of Transgenerational Borders and Collective Trauma
type: conference
user_id: '50527'
year: '2021'
...
---
_id: '44252'
author:
- first_name: Felix
full_name: Behler, Felix
id: '50527'
last_name: Behler
citation:
ama: 'Behler F. Representations of Trauma in Contemporary British War Poetry. In:
Faces of War International Conference. Organisation: London Centre for Interdisciplinary
Research. ; 2021.'
apa: 'Behler, F. (2021). Representations of Trauma in Contemporary British War Poetry.
Faces of War International Conference. Organisation: London Centre for Interdisciplinary
Research. Faces of War International Conference, London (Online).'
bibtex: '@inproceedings{Behler_2021, title={Representations of Trauma in Contemporary
British War Poetry}, booktitle={Faces of War International Conference. Organisation:
London Centre for Interdisciplinary Research.}, author={Behler, Felix}, year={2021}
}'
chicago: 'Behler, Felix. “Representations of Trauma in Contemporary British War
Poetry.” In Faces of War International Conference. Organisation: London Centre
for Interdisciplinary Research., 2021.'
ieee: F. Behler, “Representations of Trauma in Contemporary British War Poetry,”
presented at the Faces of War International Conference, London (Online), 2021.
mla: 'Behler, Felix. “Representations of Trauma in Contemporary British War Poetry.”
Faces of War International Conference. Organisation: London Centre for Interdisciplinary
Research., 2021.'
short: 'F. Behler, in: Faces of War International Conference. Organisation: London
Centre for Interdisciplinary Research., 2021.'
conference:
end_date: 2021.03.21
location: London (Online)
name: Faces of War International Conference
start_date: 2021.03.20
date_created: 2023-04-28T07:20:50Z
date_updated: 2023-04-28T07:22:30Z
language:
- iso: eng
publication: 'Faces of War International Conference. Organisation: London Centre for
Interdisciplinary Research.'
status: public
title: Representations of Trauma in Contemporary British War Poetry
type: conference
user_id: '50527'
year: '2021'
...
---
_id: '44257'
author:
- first_name: Felix
full_name: Behler, Felix
id: '50527'
last_name: Behler
citation:
ama: 'Behler F. In Between Cultural Heritage and ‘Playground’ for the Wealthy: The
Evolution of the British Countryside. In: BRITCULT 2021: Investigating the
Super-Rich. Organisation: Professor Oliver v. Knebel Doeberitz, Dr. Jonatan Jalle
Steller (University of Leipzig). ; 2021.'
apa: 'Behler, F. (2021). In Between Cultural Heritage and ‘Playground’ for the Wealthy:
The Evolution of the British Countryside. BRITCULT 2021: Investigating the
Super-Rich. Organisation: Professor Oliver v. Knebel Doeberitz, Dr. Jonatan Jalle
Steller (University of Leipzig). BRITCULT 2021: Investigating the Super-Rich,
Leipzig (Online).'
bibtex: '@inproceedings{Behler_2021, title={In Between Cultural Heritage and ‘Playground’
for the Wealthy: The Evolution of the British Countryside}, booktitle={BRITCULT
2021: Investigating the Super-Rich. Organisation: Professor Oliver v. Knebel Doeberitz,
Dr. Jonatan Jalle Steller (University of Leipzig)}, author={Behler, Felix}, year={2021}
}'
chicago: 'Behler, Felix. “In Between Cultural Heritage and ‘Playground’ for the
Wealthy: The Evolution of the British Countryside.” In BRITCULT 2021: Investigating
the Super-Rich. Organisation: Professor Oliver v. Knebel Doeberitz, Dr. Jonatan
Jalle Steller (University of Leipzig), 2021.'
ieee: 'F. Behler, “In Between Cultural Heritage and ‘Playground’ for the Wealthy:
The Evolution of the British Countryside,” presented at the BRITCULT 2021: Investigating
the Super-Rich, Leipzig (Online), 2021.'
mla: 'Behler, Felix. “In Between Cultural Heritage and ‘Playground’ for the Wealthy:
The Evolution of the British Countryside.” BRITCULT 2021: Investigating the
Super-Rich. Organisation: Professor Oliver v. Knebel Doeberitz, Dr. Jonatan Jalle
Steller (University of Leipzig), 2021.'
short: 'F. Behler, in: BRITCULT 2021: Investigating the Super-Rich. Organisation:
Professor Oliver v. Knebel Doeberitz, Dr. Jonatan Jalle Steller (University of
Leipzig), 2021.'
conference:
end_date: 2021.11.19
location: Leipzig (Online)
name: 'BRITCULT 2021: Investigating the Super-Rich'
start_date: 2021.11.18
date_created: 2023-04-28T07:38:39Z
date_updated: 2023-04-28T07:43:20Z
language:
- iso: eng
publication: 'BRITCULT 2021: Investigating the Super-Rich. Organisation: Professor
Oliver v. Knebel Doeberitz, Dr. Jonatan Jalle Steller (University of Leipzig)'
status: public
title: 'In Between Cultural Heritage and ‘Playground’ for the Wealthy: The Evolution
of the British Countryside'
type: conference
user_id: '50527'
year: '2021'
...
---
_id: '44263'
citation:
ama: Behler F, Jende YK, Büsken L-M, Rasmussen C, eds. Bridges and Barriers,
Interdisziplinäre Studentische Konferenz.; 2021.
apa: Behler, F., Jende, Y. K., Büsken, L.-M., & Rasmussen, C. (Eds.). (2021).
Bridges and Barriers, Interdisziplinäre studentische Konferenz.
bibtex: '@book{Behler_Jende_Büsken_Rasmussen_2021, title={Bridges and Barriers,
Interdisziplinäre studentische Konferenz}, year={2021} }'
chicago: Behler, Felix, Yvonne Kristin Jende, Lisa-Marie Büsken, and Cecilie Rasmussen,
eds. Bridges and Barriers, Interdisziplinäre Studentische Konferenz, 2021.
ieee: F. Behler, Y. K. Jende, L.-M. Büsken, and C. Rasmussen, Eds., Bridges and
Barriers, Interdisziplinäre studentische Konferenz. 2021.
mla: Behler, Felix, et al., editors. Bridges and Barriers, Interdisziplinäre
Studentische Konferenz. 2021.
short: F. Behler, Y.K. Jende, L.-M. Büsken, C. Rasmussen, eds., Bridges and Barriers,
Interdisziplinäre Studentische Konferenz, 2021.
conference:
end_date: 2021.02.12
location: Paderborn
name: Bridges and Barriers, Interdisziplinäre studentische Konferenz
start_date: 2021.01.15
date_created: 2023-04-28T07:55:33Z
date_updated: 2023-04-28T07:55:46Z
department:
- _id: '381'
editor:
- first_name: Felix
full_name: Behler, Felix
id: '50527'
last_name: Behler
- first_name: Yvonne Kristin
full_name: Jende, Yvonne Kristin
id: '24615'
last_name: Jende
- first_name: Lisa-Marie
full_name: Büsken, Lisa-Marie
last_name: Büsken
- first_name: Cecilie
full_name: Rasmussen, Cecilie
last_name: Rasmussen
language:
- iso: eng
status: public
title: Bridges and Barriers, Interdisziplinäre studentische Konferenz
type: conference_editor
user_id: '50527'
year: '2021'
...
---
_id: '22264'
author:
- first_name: Johannes
full_name: Göddecke, Johannes
id: '59070'
last_name: Göddecke
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Göddecke J, Meschut G. Experimentelle Untersuchung der Dämpfungseigenschaften
geklebter Strukturen unter dynamischer Beanspruchung. In: 11. Doktorandenseminar
Klebtechnik. DVS Media GmbH.'
apa: Göddecke, J., & Meschut, G. (n.d.). Experimentelle Untersuchung der Dämpfungseigenschaften
geklebter Strukturen unter dynamischer Beanspruchung. 11. Doktorandenseminar
Klebtechnik. 11. Doktorandenseminar Klebtechnik, Aachen.
bibtex: '@inproceedings{Göddecke_Meschut, place={Düsseldorf}, title={Experimentelle
Untersuchung der Dämpfungseigenschaften geklebter Strukturen unter dynamischer
Beanspruchung}, booktitle={11. Doktorandenseminar Klebtechnik}, publisher={DVS
Media GmbH}, author={Göddecke, Johannes and Meschut, Gerson} }'
chicago: 'Göddecke, Johannes, and Gerson Meschut. “Experimentelle Untersuchung der
Dämpfungseigenschaften geklebter Strukturen unter dynamischer Beanspruchung.”
In 11. Doktorandenseminar Klebtechnik. Düsseldorf: DVS Media GmbH, n.d.'
ieee: J. Göddecke and G. Meschut, “Experimentelle Untersuchung der Dämpfungseigenschaften
geklebter Strukturen unter dynamischer Beanspruchung,” presented at the 11. Doktorandenseminar
Klebtechnik, Aachen.
mla: Göddecke, Johannes, and Gerson Meschut. “Experimentelle Untersuchung der Dämpfungseigenschaften
geklebter Strukturen unter dynamischer Beanspruchung.” 11. Doktorandenseminar
Klebtechnik, DVS Media GmbH.
short: 'J. Göddecke, G. Meschut, in: 11. Doktorandenseminar Klebtechnik, DVS Media
GmbH, Düsseldorf, n.d.'
conference:
end_date: 2020-09-09
location: Aachen
name: 11. Doktorandenseminar Klebtechnik
start_date: 2020-09-08
date_created: 2021-05-28T09:30:43Z
date_updated: 2023-04-28T08:58:16Z
department:
- _id: '157'
language:
- iso: ger
place: Düsseldorf
publication: 11. Doktorandenseminar Klebtechnik
publication_status: inpress
publisher: DVS Media GmbH
quality_controlled: '1'
status: public
title: Experimentelle Untersuchung der Dämpfungseigenschaften geklebter Strukturen
unter dynamischer Beanspruchung
type: conference
user_id: '59070'
year: '2021'
...
---
_id: '22930'
abstract:
- lang: eng
text: Self-piercing riveting is an established technique for joining multi-material
structures in car body manufacturing. Rivets for self-piercing riveting differ
in their geometry, the material used, the condition of the material and their
surface condition. To shorten the manufacturing process by omitting the heat treatment
and the coating process, the authors have elaborated a concept for the use of
stainless steel with high strain hardening as a rivet material. The focus of the
present investigation is on the evaluation of the influences of the rivet’s geometry
and material on its deformation behaviour. Conventional rivets of types P and
HD2, a rivet with an improved geometry made of treatable steel 38B2, and rivets
made of the stainless steels 1.3815 and 1.4541 are examined. The analysis is conducted
by means of multi-step joining tests for two material combinations comprising
high-strength steel HCT70X and aluminium EN AW-5083. The joints are cut to provide
a cross-section and the deformation behaviour of the different rivets is analysed
on the basis of the measured changes in geometry and hardness. In parallel, an
examination of the force-stroke curves provides further insights. It can be demonstrated
that, besides the geometry, the material strength, in particular, has a significant
influence on the deformation behaviour of the rivet. The strength of steel 1.4541
is seen to be too low for the joining task, while the strength of steel 1.3815
is sufficient, and hence the investigation confirms the capability of rivets made
of 1.3815 for joining even challenging material combinations.
author:
- first_name: Benedikt
full_name: Uhe, Benedikt
id: '38131'
last_name: Uhe
- first_name: Clara-Maria
full_name: Kuball, Clara-Maria
last_name: Kuball
- first_name: Marion
full_name: Merklein, Marion
last_name: Merklein
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Uhe B, Kuball C-M, Merklein M, Meschut G. Self-Piercing Riveting Using Rivets
Made of Stainless Steel with High Strain Hardening. In: Daehn G, Cao J, Kinsey
B, Tekkaya E, Vivek A, Yoshida Y, eds. Forming the Future - Proceedings of
the 13th International Conference on the Technology of Plasticity. The Minerals,
Metals & Materials Series. Springer; 2021:1495-1506. doi:10.1007/978-3-030-75381-8_124'
apa: Uhe, B., Kuball, C.-M., Merklein, M., & Meschut, G. (2021). Self-Piercing
Riveting Using Rivets Made of Stainless Steel with High Strain Hardening. In G.
Daehn, J. Cao, B. Kinsey, E. Tekkaya, A. Vivek, & Y. Yoshida (Eds.), Forming
the Future - Proceedings of the 13th International Conference on the Technology
of Plasticity. The Minerals, Metals & Materials Series. (pp. 1495–1506).
Springer. https://doi.org/10.1007/978-3-030-75381-8_124
bibtex: '@inbook{Uhe_Kuball_Merklein_Meschut_2021, place={Cham}, title={Self-Piercing
Riveting Using Rivets Made of Stainless Steel with High Strain Hardening}, DOI={10.1007/978-3-030-75381-8_124},
booktitle={Forming the Future - Proceedings of the 13th International Conference
on the Technology of Plasticity. The Minerals, Metals & Materials Series.},
publisher={Springer}, author={Uhe, Benedikt and Kuball, Clara-Maria and Merklein,
Marion and Meschut, Gerson}, editor={Daehn, Glenn and Cao, Jian and Kinsey, Brad
and Tekkaya, Erman and Vivek, Anupam and Yoshida, Yoshinori}, year={2021}, pages={1495–1506}
}'
chicago: 'Uhe, Benedikt, Clara-Maria Kuball, Marion Merklein, and Gerson Meschut.
“Self-Piercing Riveting Using Rivets Made of Stainless Steel with High Strain
Hardening.” In Forming the Future - Proceedings of the 13th International Conference
on the Technology of Plasticity. The Minerals, Metals & Materials Series.,
edited by Glenn Daehn, Jian Cao, Brad Kinsey, Erman Tekkaya, Anupam Vivek, and
Yoshinori Yoshida, 1495–1506. Cham: Springer, 2021. https://doi.org/10.1007/978-3-030-75381-8_124.'
ieee: 'B. Uhe, C.-M. Kuball, M. Merklein, and G. Meschut, “Self-Piercing Riveting
Using Rivets Made of Stainless Steel with High Strain Hardening,” in Forming
the Future - Proceedings of the 13th International Conference on the Technology
of Plasticity. The Minerals, Metals & Materials Series., G. Daehn, J.
Cao, B. Kinsey, E. Tekkaya, A. Vivek, and Y. Yoshida, Eds. Cham: Springer, 2021,
pp. 1495–1506.'
mla: Uhe, Benedikt, et al. “Self-Piercing Riveting Using Rivets Made of Stainless
Steel with High Strain Hardening.” Forming the Future - Proceedings of the
13th International Conference on the Technology of Plasticity. The Minerals, Metals
& Materials Series., edited by Glenn Daehn et al., Springer, 2021, pp.
1495–506, doi:10.1007/978-3-030-75381-8_124.
short: 'B. Uhe, C.-M. Kuball, M. Merklein, G. Meschut, in: G. Daehn, J. Cao, B.
Kinsey, E. Tekkaya, A. Vivek, Y. Yoshida (Eds.), Forming the Future - Proceedings
of the 13th International Conference on the Technology of Plasticity. The Minerals,
Metals & Materials Series., Springer, Cham, 2021, pp. 1495–1506.'
date_created: 2021-08-04T14:02:32Z
date_updated: 2023-04-28T09:20:35Z
department:
- _id: '157'
doi: 10.1007/978-3-030-75381-8_124
editor:
- first_name: Glenn
full_name: Daehn, Glenn
last_name: Daehn
- first_name: Jian
full_name: Cao, Jian
last_name: Cao
- first_name: Brad
full_name: Kinsey, Brad
last_name: Kinsey
- first_name: Erman
full_name: Tekkaya, Erman
last_name: Tekkaya
- first_name: Anupam
full_name: Vivek, Anupam
last_name: Vivek
- first_name: Yoshinori
full_name: Yoshida, Yoshinori
last_name: Yoshida
keyword:
- Self-piercing riveting
- Lightweight design
- Deformation behaviour
- Stainless steel
- High nitrogen steel
language:
- iso: eng
page: 1495-1506
place: Cham
publication: Forming the Future - Proceedings of the 13th International Conference
on the Technology of Plasticity. The Minerals, Metals & Materials Series.
publication_status: published
publisher: Springer
quality_controlled: '1'
status: public
title: Self-Piercing Riveting Using Rivets Made of Stainless Steel with High Strain
Hardening
type: book_chapter
user_id: '38131'
year: '2021'
...
---
_id: '22274'
abstract:
- lang: eng
text: 'The use of high-strength steel and aluminium is rising due to the intensified
efforts being made in lightweight design, and self-piercing riveting is becoming
increasingly important. Conventional rivets for self-piercing riveting differ
in their geometry, the material used, the condition of the material and the coating.
To shorten the manufacturing process, the use of stainless steel with high strain
hardening as the rivet material represents a promising approach. This allows the
coating of the rivets to be omitted due to the corrosion resistance of the material
and, since the strength of the stainless steel is achieved by cold forming, heat
treatment is no longer required. In addition, it is possible to adjust the local
strength within the rivet. Because of that, the authors have elaborated a concept
for using high nitrogen steel 1.3815 as the rivet material. The present investigation
focusses on the joint strength in order to evaluate the capability of rivets in
high nitrogen steel by comparison to conventional rivets made of treatable steel.
Due to certain challenges in the forming process of the high nitrogen steel rivets,
deviations result from the targeted rivet geometry. Mainly these deviations cause
a lower joint strength with these rivets, which is, however, adequate. All in
all, the capability of the new rivet is proven by the results of this investigation. '
author:
- first_name: Benedikt
full_name: Uhe, Benedikt
id: '38131'
last_name: Uhe
- first_name: Clara-Maria
full_name: Kuball, Clara-Maria
last_name: Kuball
- first_name: Marion
full_name: Merklein, Marion
last_name: Merklein
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Uhe B, Kuball C-M, Merklein M, Meschut G. Strength of self-piercing riveted
Joints with conventional Rivets and Rivets made of High Nitrogen Steel. In: ;
2021. doi:10.25518/esaform21.1911'
apa: Uhe, B., Kuball, C.-M., Merklein, M., & Meschut, G. (2021). Strength
of self-piercing riveted Joints with conventional Rivets and Rivets made of High
Nitrogen Steel. 24th International Conference on Material Forming (ESAFORM),
Liège, Belgien. https://doi.org/10.25518/esaform21.1911
bibtex: '@inproceedings{Uhe_Kuball_Merklein_Meschut_2021, title={Strength of self-piercing
riveted Joints with conventional Rivets and Rivets made of High Nitrogen Steel},
DOI={10.25518/esaform21.1911},
author={Uhe, Benedikt and Kuball, Clara-Maria and Merklein, Marion and Meschut,
Gerson}, year={2021} }'
chicago: Uhe, Benedikt, Clara-Maria Kuball, Marion Merklein, and Gerson Meschut.
“Strength of Self-Piercing Riveted Joints with Conventional Rivets and Rivets
Made of High Nitrogen Steel,” 2021. https://doi.org/10.25518/esaform21.1911.
ieee: 'B. Uhe, C.-M. Kuball, M. Merklein, and G. Meschut, “Strength of self-piercing
riveted Joints with conventional Rivets and Rivets made of High Nitrogen Steel,”
presented at the 24th International Conference on Material Forming (ESAFORM),
Liège, Belgien, 2021, doi: 10.25518/esaform21.1911.'
mla: Uhe, Benedikt, et al. Strength of Self-Piercing Riveted Joints with Conventional
Rivets and Rivets Made of High Nitrogen Steel. 2021, doi:10.25518/esaform21.1911.
short: 'B. Uhe, C.-M. Kuball, M. Merklein, G. Meschut, in: 2021.'
conference:
end_date: 2021-04-16
location: Liège, Belgien
name: 24th International Conference on Material Forming (ESAFORM)
start_date: 2021-04-14
date_created: 2021-05-31T10:17:37Z
date_updated: 2023-04-28T09:20:05Z
department:
- _id: '157'
doi: 10.25518/esaform21.1911
keyword:
- Self-piercing Riveting
- Joining Technology
- Rivet Geometry
- Rivet Material
- High Nitrogen Steel
- Joint Strength
language:
- iso: eng
quality_controlled: '1'
status: public
title: Strength of self-piercing riveted Joints with conventional Rivets and Rivets
made of High Nitrogen Steel
type: conference
user_id: '38131'
year: '2021'
...
---
_id: '22272'
abstract:
- lang: eng
text: The number of multi-material joints is increasing as a result of lightweight
design. Self-piercing riveting (SPR) is an important mechanical joining technique
for multi-material structures. Rivets for SPR are coated to prevent corrosion,
but this coating also influences the friction that prevails during the joining
process. The aim of the present investigation is to evaluate this influence. The
investigation focuses on the common rivet coatings Almac® and zinc-nickel with
topcoat as well as on uncoated rivet surfaces. First of all, the coating thickness
and the uniformity of the coating distribution are analysed. Friction tests facilitate
the classification of the surface properties. The influence of the friction on
the characteristic joint parameters and the force-stroke curves is analysed by
means of experimental joining tests. More in-depth knowledge of the effects that
occur is achieved through the use of numerical simulation. Overall, it is shown
that the surface condition of the rivet has an impact on the friction during the
joining process and on the resulting joint. However, the detected deviations between
different surface conditions do not restrict the operational capability of SPR
and the properties of uncoated rivet surfaces, in particular, are similar to those
of Almac®-coated rivets. It can thus be assumed that SPR with respect to the joining
process is also possible without rivet coating in principle.
author:
- first_name: Benedikt
full_name: Uhe, Benedikt
id: '38131'
last_name: Uhe
- first_name: Clara-Maria
full_name: Kuball, Clara-Maria
last_name: Kuball
- first_name: Marion
full_name: Merklein, Marion
last_name: Merklein
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: Uhe B, Kuball C-M, Merklein M, Meschut G. Influence of the Rivet Coating on
the Friction during Self-Piercing Riveting. Key Engineering Materials.
2021;883:11-18. doi:10.4028/www.scientific.net/KEM.883.11
apa: Uhe, B., Kuball, C.-M., Merklein, M., & Meschut, G. (2021). Influence of
the Rivet Coating on the Friction during Self-Piercing Riveting. Key Engineering
Materials, 883, 11–18. https://doi.org/10.4028/www.scientific.net/KEM.883.11
bibtex: '@article{Uhe_Kuball_Merklein_Meschut_2021, title={Influence of the Rivet
Coating on the Friction during Self-Piercing Riveting}, volume={883}, DOI={10.4028/www.scientific.net/KEM.883.11},
journal={Key Engineering Materials}, author={Uhe, Benedikt and Kuball, Clara-Maria
and Merklein, Marion and Meschut, Gerson}, year={2021}, pages={11–18} }'
chicago: 'Uhe, Benedikt, Clara-Maria Kuball, Marion Merklein, and Gerson Meschut.
“Influence of the Rivet Coating on the Friction during Self-Piercing Riveting.”
Key Engineering Materials 883 (2021): 11–18. https://doi.org/10.4028/www.scientific.net/KEM.883.11.'
ieee: 'B. Uhe, C.-M. Kuball, M. Merklein, and G. Meschut, “Influence of the Rivet
Coating on the Friction during Self-Piercing Riveting,” Key Engineering Materials,
vol. 883, pp. 11–18, 2021, doi: 10.4028/www.scientific.net/KEM.883.11.'
mla: Uhe, Benedikt, et al. “Influence of the Rivet Coating on the Friction during
Self-Piercing Riveting.” Key Engineering Materials, vol. 883, 2021, pp.
11–18, doi:10.4028/www.scientific.net/KEM.883.11.
short: B. Uhe, C.-M. Kuball, M. Merklein, G. Meschut, Key Engineering Materials
883 (2021) 11–18.
date_created: 2021-05-31T10:06:11Z
date_updated: 2023-04-28T09:20:29Z
department:
- _id: '157'
doi: 10.4028/www.scientific.net/KEM.883.11
intvolume: ' 883'
keyword:
- Coating
- Friction
- Joining
language:
- iso: eng
page: 11-18
publication: Key Engineering Materials
quality_controlled: '1'
status: public
title: Influence of the Rivet Coating on the Friction during Self-Piercing Riveting
type: journal_article
user_id: '38131'
volume: 883
year: '2021'
...
---
_id: '30845'
author:
- first_name: Clara-Maria
full_name: Kuball, Clara-Maria
last_name: Kuball
- first_name: Benedikt
full_name: Uhe, Benedikt
id: '38131'
last_name: Uhe
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Marion
full_name: Merklein, Marion
last_name: Merklein
citation:
ama: 'Kuball C-M, Uhe B, Meschut G, Merklein M. Selective application of different
forming temperatures for individual process stages in a rivet manufacturing process
with high nitrogen steel. In: ; 2021.'
apa: Kuball, C.-M., Uhe, B., Meschut, G., & Merklein, M. (2021). Selective
application of different forming temperatures for individual process stages in
a rivet manufacturing process with high nitrogen steel. 2nd International
Conference on Advanced Joining Processes, Sintra, PT.
bibtex: '@inproceedings{Kuball_Uhe_Meschut_Merklein_2021, title={Selective application
of different forming temperatures for individual process stages in a rivet manufacturing
process with high nitrogen steel}, author={Kuball, Clara-Maria and Uhe, Benedikt
and Meschut, Gerson and Merklein, Marion}, year={2021} }'
chicago: Kuball, Clara-Maria, Benedikt Uhe, Gerson Meschut, and Marion Merklein.
“Selective Application of Different Forming Temperatures for Individual Process
Stages in a Rivet Manufacturing Process with High Nitrogen Steel,” 2021.
ieee: C.-M. Kuball, B. Uhe, G. Meschut, and M. Merklein, “Selective application
of different forming temperatures for individual process stages in a rivet manufacturing
process with high nitrogen steel,” presented at the 2nd International Conference
on Advanced Joining Processes, Sintra, PT, 2021.
mla: Kuball, Clara-Maria, et al. Selective Application of Different Forming Temperatures
for Individual Process Stages in a Rivet Manufacturing Process with High Nitrogen
Steel. 2021.
short: 'C.-M. Kuball, B. Uhe, G. Meschut, M. Merklein, in: 2021.'
conference:
end_date: 2021-10-22
location: Sintra, PT
name: 2nd International Conference on Advanced Joining Processes
start_date: 2021-10-21
date_created: 2022-04-07T06:46:58Z
date_updated: 2023-04-28T09:20:16Z
department:
- _id: '157'
language:
- iso: eng
quality_controlled: '1'
status: public
title: Selective application of different forming temperatures for individual process
stages in a rivet manufacturing process with high nitrogen steel
type: conference_abstract
user_id: '38131'
year: '2021'
...
---
_id: '24541'
abstract:
- lang: eng
text: The mechanical properties of joined structures are determined considerably
by the chosen joining technology. With the aim of providing a method that enables
a faster and more profound decision-making in the spatial distribution of joining
points during product development, a new method for the load path analysis of
joining points is presented. For an exemplary car body, the load type in the joining
elements, i.e. pure tensile, shear and combined tensile-shear loads, is determined
using finite element analysis (FEA). Based on the evaluated loads, the resulting
load paths in selected joining points are analyzed using a 2D FE-model of a clinching
point. State of the art methods for load path analysis are dependent on the selected
coordinate system or the existing stress state. Thus, a general statement about
the load transmission path is not possible at this time. Here, a novel method
for the analysis of load paths is used, which is independent of the alignment
of the analyzed geometry. The basic assumption of the new load path analysis method
was confirmed by using a simple specimen with a square hole in different orientations.
The results presented here show a possibility to display the load transmission
path invariantly. In further steps, the method will be extended for 3D analysis
and the investigation of more complex assemblies. The primary goal of this methodical
approach is an even load distribution over the joining elements and the component.
This will provide a basis for future design approaches aimed at reducing the number
of joining elements in joined structures.
author:
- first_name: Christian
full_name: Steinfelder, Christian
last_name: Steinfelder
- first_name: Sven
full_name: Martin, Sven
id: '38177'
last_name: Martin
- first_name: Alexander
full_name: Brosius, Alexander
last_name: Brosius
- first_name: Thomas
full_name: Tröster, Thomas
last_name: Tröster
citation:
ama: Steinfelder C, Martin S, Brosius A, Tröster T. Load Path Transmission in Joining
Elements. Key Engineering Materials. Published online 2021:73-80. doi:10.4028/www.scientific.net/kem.883.73
apa: Steinfelder, C., Martin, S., Brosius, A., & Tröster, T. (2021). Load Path
Transmission in Joining Elements. Key Engineering Materials, 73–80. https://doi.org/10.4028/www.scientific.net/kem.883.73
bibtex: '@article{Steinfelder_Martin_Brosius_Tröster_2021, title={Load Path Transmission
in Joining Elements}, DOI={10.4028/www.scientific.net/kem.883.73},
journal={Key Engineering Materials}, author={Steinfelder, Christian and Martin,
Sven and Brosius, Alexander and Tröster, Thomas}, year={2021}, pages={73–80} }'
chicago: Steinfelder, Christian, Sven Martin, Alexander Brosius, and Thomas Tröster.
“Load Path Transmission in Joining Elements.” Key Engineering Materials,
2021, 73–80. https://doi.org/10.4028/www.scientific.net/kem.883.73.
ieee: 'C. Steinfelder, S. Martin, A. Brosius, and T. Tröster, “Load Path Transmission
in Joining Elements,” Key Engineering Materials, pp. 73–80, 2021, doi:
10.4028/www.scientific.net/kem.883.73.'
mla: Steinfelder, Christian, et al. “Load Path Transmission in Joining Elements.”
Key Engineering Materials, 2021, pp. 73–80, doi:10.4028/www.scientific.net/kem.883.73.
short: C. Steinfelder, S. Martin, A. Brosius, T. Tröster, Key Engineering Materials
(2021) 73–80.
date_created: 2021-09-16T08:23:00Z
date_updated: 2023-04-28T11:57:49Z
department:
- _id: '321'
- _id: '149'
- _id: '630'
doi: 10.4028/www.scientific.net/kem.883.73
language:
- iso: eng
page: 73-80
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '132'
name: 'TRR 285 - B: TRR 285 - Project Area B'
- _id: '140'
name: 'TRR 285 – B01: TRR 285 - Subproject B01'
publication: Key Engineering Materials
publication_identifier:
issn:
- 1662-9795
publication_status: published
quality_controlled: '1'
status: public
title: Load Path Transmission in Joining Elements
type: journal_article
user_id: '38177'
year: '2021'
...
---
_id: '24548'
author:
- first_name: Sven
full_name: Martin, Sven
id: '38177'
last_name: Martin
- first_name: Thomas
full_name: Tröster, Thomas
last_name: Tröster
citation:
ama: Martin S, Tröster T. Joint point loadings in car bodies – the influence of
manufacturing tolerances and scatter in material properties. ESAFORM 2021.
Published online 2021. doi:10.25518/esaform21.3801
apa: Martin, S., & Tröster, T. (2021). Joint point loadings in car bodies –
the influence of manufacturing tolerances and scatter in material properties.
ESAFORM 2021. https://doi.org/10.25518/esaform21.3801
bibtex: '@article{Martin_Tröster_2021, title={Joint point loadings in car bodies
– the influence of manufacturing tolerances and scatter in material properties},
DOI={10.25518/esaform21.3801},
journal={ESAFORM 2021}, author={Martin, Sven and Tröster, Thomas}, year={2021}
}'
chicago: Martin, Sven, and Thomas Tröster. “Joint point loadings in car bodies –
the influence of manufacturing tolerances and scatter in material properties.”
ESAFORM 2021, 2021. https://doi.org/10.25518/esaform21.3801.
ieee: 'S. Martin and T. Tröster, “Joint point loadings in car bodies – the influence
of manufacturing tolerances and scatter in material properties,” ESAFORM 2021,
2021, doi: 10.25518/esaform21.3801.'
mla: Martin, Sven, and Thomas Tröster. “Joint point loadings in car bodies – the
influence of manufacturing tolerances and scatter in material properties.” ESAFORM
2021, 2021, doi:10.25518/esaform21.3801.
short: S. Martin, T. Tröster, ESAFORM 2021 (2021).
date_created: 2021-09-16T08:34:41Z
date_updated: 2023-04-28T11:58:00Z
department:
- _id: '321'
- _id: '149'
- _id: '630'
doi: 10.25518/esaform21.3801
language:
- iso: fre
main_file_link:
- open_access: '1'
url: https://popups.uliege.be/esaform21/index.php?id=3801
oa: '1'
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '132'
name: 'TRR 285 - B: TRR 285 - Project Area B'
- _id: '140'
name: 'TRR 285 – B01: TRR 285 - Subproject B01'
publication: ESAFORM 2021
publication_status: published
quality_controlled: '1'
status: public
title: Joint point loadings in car bodies – the influence of manufacturing tolerances
and scatter in material properties
type: journal_article
user_id: '38177'
year: '2021'
...
---
_id: '26994'
author:
- first_name: Tim
full_name: Stallmeister, Tim
id: '45538'
last_name: Stallmeister
- first_name: Sven
full_name: Martin, Sven
id: '38177'
last_name: Martin
- first_name: Thorsten
full_name: Marten, Thorsten
id: '338'
last_name: Marten
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Stallmeister T, Martin S, Marten T, Tröster T. Experimental investigation
on lightweight potentials of fiber-metal-laminates for automotive battery cases.
In: ; 2021.'
apa: Stallmeister, T., Martin, S., Marten, T., & Tröster, T. (2021). Experimental
investigation on lightweight potentials of fiber-metal-laminates for automotive
battery cases. Automotive Circle conference – Battery Systems in Car Body
Engineering 2021, Bad Nauheim.
bibtex: '@inproceedings{Stallmeister_Martin_Marten_Tröster_2021, title={Experimental
investigation on lightweight potentials of fiber-metal-laminates for automotive
battery cases}, author={Stallmeister, Tim and Martin, Sven and Marten, Thorsten
and Tröster, Thomas}, year={2021} }'
chicago: Stallmeister, Tim, Sven Martin, Thorsten Marten, and Thomas Tröster. “Experimental
Investigation on Lightweight Potentials of Fiber-Metal-Laminates for Automotive
Battery Cases,” 2021.
ieee: T. Stallmeister, S. Martin, T. Marten, and T. Tröster, “Experimental investigation
on lightweight potentials of fiber-metal-laminates for automotive battery cases,”
presented at the Automotive Circle conference – Battery Systems in Car Body Engineering
2021, Bad Nauheim, 2021.
mla: Stallmeister, Tim, et al. Experimental Investigation on Lightweight Potentials
of Fiber-Metal-Laminates for Automotive Battery Cases. 2021.
short: 'T. Stallmeister, S. Martin, T. Marten, T. Tröster, in: 2021.'
conference:
end_date: 2021-10-27
location: Bad Nauheim
name: Automotive Circle conference – Battery Systems in Car Body Engineering 2021
start_date: 2021-10-26
date_created: 2021-10-28T13:44:02Z
date_updated: 2023-04-28T11:58:31Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
quality_controlled: '1'
status: public
title: Experimental investigation on lightweight potentials of fiber-metal-laminates
for automotive battery cases
type: conference
user_id: '38177'
year: '2021'
...
---
_id: '23835'
author:
- first_name: Marius
full_name: Dörner, Marius
last_name: Dörner
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
citation:
ama: 'Dörner M, Schöppner V. Development of an Analytical Mathematical Modelling
Approach for a More Precise Description of Disperse Melting in Solid Bed Breaking
Screw Concepts. In: ANTEC 21. ; 2021.'
apa: Dörner, M., & Schöppner, V. (2021). Development of an Analytical Mathematical
Modelling Approach for a More Precise Description of Disperse Melting in Solid
Bed Breaking Screw Concepts. ANTEC 21. ANTEC 21.
bibtex: '@inproceedings{Dörner_Schöppner_2021, title={Development of an Analytical
Mathematical Modelling Approach for a More Precise Description of Disperse Melting
in Solid Bed Breaking Screw Concepts}, booktitle={ANTEC 21}, author={Dörner, Marius
and Schöppner, Volker}, year={2021} }'
chicago: Dörner, Marius, and Volker Schöppner. “Development of an Analytical Mathematical
Modelling Approach for a More Precise Description of Disperse Melting in Solid
Bed Breaking Screw Concepts.” In ANTEC 21, 2021.
ieee: M. Dörner and V. Schöppner, “Development of an Analytical Mathematical Modelling
Approach for a More Precise Description of Disperse Melting in Solid Bed Breaking
Screw Concepts,” presented at the ANTEC 21, 2021.
mla: Dörner, Marius, and Volker Schöppner. “Development of an Analytical Mathematical
Modelling Approach for a More Precise Description of Disperse Melting in Solid
Bed Breaking Screw Concepts.” ANTEC 21, 2021.
short: 'M. Dörner, V. Schöppner, in: ANTEC 21, 2021.'
conference:
end_date: 2021-01-12
name: ANTEC 21
start_date: 2021-01-12
date_created: 2021-09-07T08:53:24Z
date_updated: 2023-05-02T06:54:15Z
department:
- _id: '9'
- _id: '367'
language:
- iso: eng
publication: ANTEC 21
status: public
title: Development of an Analytical Mathematical Modelling Approach for a More Precise
Description of Disperse Melting in Solid Bed Breaking Screw Concepts
type: conference
user_id: '44116'
year: '2021'
...
---
_id: '31769'
author:
- first_name: Elmar
full_name: Moritzer, Elmar
id: '20531'
last_name: Moritzer
- first_name: Maximilian
full_name: Richters, Maximilian
id: '38221'
last_name: Richters
citation:
ama: Moritzer E, Richters M. Injection Molding of Wood-Filled Thermoplastic Polyurethane.
Journal of Composites Science. 2021;(12).
apa: Moritzer, E., & Richters, M. (2021). Injection Molding of Wood-Filled Thermoplastic
Polyurethane. Journal of Composites Science, 12.
bibtex: '@article{Moritzer_Richters_2021, title={Injection Molding of Wood-Filled
Thermoplastic Polyurethane}, number={12}, journal={ Journal of Composites Science},
author={Moritzer, Elmar and Richters, Maximilian}, year={2021} }'
chicago: Moritzer, Elmar, and Maximilian Richters. “Injection Molding of Wood-Filled
Thermoplastic Polyurethane.” Journal of Composites Science, no. 12 (2021).
ieee: E. Moritzer and M. Richters, “Injection Molding of Wood-Filled Thermoplastic
Polyurethane,” Journal of Composites Science, no. 12, 2021.
mla: Moritzer, Elmar, and Maximilian Richters. “Injection Molding of Wood-Filled
Thermoplastic Polyurethane.” Journal of Composites Science, no. 12, 2021.
short: E. Moritzer, M. Richters, Journal of Composites Science (2021).
date_created: 2022-06-07T09:50:44Z
date_updated: 2023-05-02T07:04:16Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
issue: '12'
language:
- iso: eng
publication: ' Journal of Composites Science'
publication_identifier:
issn:
- 2504-477X
quality_controlled: '1'
status: public
title: Injection Molding of Wood-Filled Thermoplastic Polyurethane
type: journal_article
user_id: '44116'
year: '2021'
...
---
_id: '31757'
author:
- first_name: Elmar
full_name: Moritzer, Elmar
id: '20531'
last_name: Moritzer
- first_name: Dimitri
full_name: Krassmann, Dimitri
id: '41916'
last_name: Krassmann
citation:
ama: Moritzer E, Krassmann D. Development of a new joining technology for hybrid
joints of sheet metal and continuous fiber-reinforced thermoplastics. Welding
in the World. Published online 2021.
apa: Moritzer, E., & Krassmann, D. (2021). Development of a new joining technology
for hybrid joints of sheet metal and continuous fiber-reinforced thermoplastics.
Welding in the World.
bibtex: '@article{Moritzer_Krassmann_2021, title={Development of a new joining technology
for hybrid joints of sheet metal and continuous fiber-reinforced thermoplastics},
journal={Welding in the World}, author={Moritzer, Elmar and Krassmann, Dimitri},
year={2021} }'
chicago: Moritzer, Elmar, and Dimitri Krassmann. “Development of a New Joining Technology
for Hybrid Joints of Sheet Metal and Continuous Fiber-Reinforced Thermoplastics.”
Welding in the World, 2021.
ieee: E. Moritzer and D. Krassmann, “Development of a new joining technology for
hybrid joints of sheet metal and continuous fiber-reinforced thermoplastics,”
Welding in the World, 2021.
mla: Moritzer, Elmar, and Dimitri Krassmann. “Development of a New Joining Technology
for Hybrid Joints of Sheet Metal and Continuous Fiber-Reinforced Thermoplastics.”
Welding in the World, 2021.
short: E. Moritzer, D. Krassmann, Welding in the World (2021).
date_created: 2022-06-07T09:37:48Z
date_updated: 2023-05-02T07:04:57Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
publication: Welding in the World
quality_controlled: '1'
status: public
title: Development of a new joining technology for hybrid joints of sheet metal and
continuous fiber-reinforced thermoplastics
type: journal_article
user_id: '44116'
year: '2021'
...
---
_id: '30297'
author:
- first_name: Julian
full_name: Rozo Vasquez, Julian
last_name: Rozo Vasquez
- first_name: Bahman
full_name: Arian, Bahman
id: '36287'
last_name: Arian
- first_name: Markus
full_name: Riepold, Markus
last_name: Riepold
- first_name: Frank
full_name: Walther, Frank
last_name: Walther
- first_name: Werner
full_name: Homberg, Werner
id: '233'
last_name: Homberg
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: 'Rozo Vasquez J, Arian B, Riepold M, Walther F, Homberg W, Trächtler A. Magnetic
Barkhausen noise analysis for microstructural effects separation during flow forming
of metastable austenite 304L. In: Proceedings of the 11th International Workshop
NDT in Progress. ; 2021.'
apa: Rozo Vasquez, J., Arian, B., Riepold, M., Walther, F., Homberg, W., & Trächtler,
A. (2021). Magnetic Barkhausen noise analysis for microstructural effects separation
during flow forming of metastable austenite 304L. Proceedings of the 11th International
Workshop NDT in Progress. ENDT&CM 2021 - 11th International Workshop
NDT in Progress, Prague.
bibtex: '@inproceedings{Rozo Vasquez_Arian_Riepold_Walther_Homberg_Trächtler_2021,
title={Magnetic Barkhausen noise analysis for microstructural effects separation
during flow forming of metastable austenite 304L.}, booktitle={Proceedings of
the 11th International Workshop NDT in Progress}, author={Rozo Vasquez, Julian
and Arian, Bahman and Riepold, Markus and Walther, Frank and Homberg, Werner and
Trächtler, Ansgar}, year={2021} }'
chicago: Rozo Vasquez, Julian, Bahman Arian, Markus Riepold, Frank Walther, Werner
Homberg, and Ansgar Trächtler. “Magnetic Barkhausen Noise Analysis for Microstructural
Effects Separation during Flow Forming of Metastable Austenite 304L.” In Proceedings
of the 11th International Workshop NDT in Progress, 2021.
ieee: J. Rozo Vasquez, B. Arian, M. Riepold, F. Walther, W. Homberg, and A. Trächtler,
“Magnetic Barkhausen noise analysis for microstructural effects separation during
flow forming of metastable austenite 304L.,” presented at the ENDT&CM 2021
- 11th International Workshop NDT in Progress, Prague, 2021.
mla: Rozo Vasquez, Julian, et al. “Magnetic Barkhausen Noise Analysis for Microstructural
Effects Separation during Flow Forming of Metastable Austenite 304L.” Proceedings
of the 11th International Workshop NDT in Progress, 2021.
short: 'J. Rozo Vasquez, B. Arian, M. Riepold, F. Walther, W. Homberg, A. Trächtler,
in: Proceedings of the 11th International Workshop NDT in Progress, 2021.'
conference:
end_date: 2021.10.07
location: Prague
name: ENDT&CM 2021 - 11th International Workshop NDT in Progress
start_date: 2021.10.04
date_created: 2022-03-15T12:07:17Z
date_updated: 2023-05-02T08:22:02Z
department:
- _id: '156'
- _id: '153'
- _id: '241'
language:
- iso: eng
publication: Proceedings of the 11th International Workshop NDT in Progress
quality_controlled: '1'
status: public
title: Magnetic Barkhausen noise analysis for microstructural effects separation during
flow forming of metastable austenite 304L.
type: conference
user_id: '36287'
year: '2021'
...
---
_id: '23465'
abstract:
- lang: eng
text: One of the main objectives of production engineering is to reproducibly manufacture
(complex) defect-free parts. To achieve this, it is necessary to employ an appropriate
process or tool design. While this will generally prove successful, it cannot,
however, offset stochastic defects with local variations in material properties.
Closed-loop process control represents a promising approach for a solution in
this context. The state of the art involves using this approach to control geometric
parameters such as a length. So far, no research or applications have been conducted
with closed-loop control for microstructure and product properties. In the project
on which this paper is based, the local martensite content of parts is to be adjusted
in a highly precise and reproducible manner. The forming process employed is a
special, property-controlled flow-forming process. A model-based controller is
thus to generate corresponding correction values for the tool-path geometry and
tool-path velocity on the basis of online martensite content measurements. For
the controller model, it is planned to use a special process or microstructure
(correlation) model. The planned paper not only describes the experimental setup
but also presents results of initial experimental investigations for subsequent
use in the closed-loop control of α’-martensite content during flow-forming.
author:
- first_name: Bahman
full_name: Arian, Bahman
id: '36287'
last_name: Arian
- first_name: Werner
full_name: Homberg, Werner
id: '233'
last_name: Homberg
- first_name: Markus
full_name: Riepold, Markus
last_name: Riepold
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
- first_name: Julian
full_name: Rozo Vasquez, Julian
last_name: Rozo Vasquez
- first_name: Frank
full_name: Walther, Frank
last_name: Walther
citation:
ama: 'Arian B, Homberg W, Riepold M, Trächtler A, Rozo Vasquez J, Walther F. Forming
of metastable austenitic stainless steel tubes with axially graded martensite
content by flow-forming. In: ULiège Library; 2021.'
apa: Arian, B., Homberg, W., Riepold, M., Trächtler, A., Rozo Vasquez, J., &
Walther, F. (2021). Forming of metastable austenitic stainless steel tubes
with axially graded martensite content by flow-forming. 24th International
Conference on Material Forming - ESAFORM 2021, Liège, Belgium.
bibtex: '@inproceedings{Arian_Homberg_Riepold_Trächtler_Rozo Vasquez_Walther_2021,
place={Liège}, title={Forming of metastable austenitic stainless steel tubes with
axially graded martensite content by flow-forming}, publisher={ULiège Library},
author={Arian, Bahman and Homberg, Werner and Riepold, Markus and Trächtler, Ansgar
and Rozo Vasquez, Julian and Walther, Frank}, year={2021} }'
chicago: 'Arian, Bahman, Werner Homberg, Markus Riepold, Ansgar Trächtler, Julian
Rozo Vasquez, and Frank Walther. “Forming of Metastable Austenitic Stainless Steel
Tubes with Axially Graded Martensite Content by Flow-Forming.” Liège: ULiège Library,
2021.'
ieee: B. Arian, W. Homberg, M. Riepold, A. Trächtler, J. Rozo Vasquez, and F. Walther,
“Forming of metastable austenitic stainless steel tubes with axially graded martensite
content by flow-forming,” presented at the 24th International Conference on Material
Forming - ESAFORM 2021, Liège, Belgium, 2021.
mla: Arian, Bahman, et al. Forming of Metastable Austenitic Stainless Steel Tubes
with Axially Graded Martensite Content by Flow-Forming. ULiège Library, 2021.
short: 'B. Arian, W. Homberg, M. Riepold, A. Trächtler, J. Rozo Vasquez, F. Walther,
in: ULiège Library, Liège, 2021.'
conference:
end_date: 2021-04-16
location: Liège, Belgium
name: 24th International Conference on Material Forming - ESAFORM 2021
start_date: 2021-04-14
date_created: 2021-08-23T13:00:35Z
date_updated: 2023-05-02T08:27:48Z
department:
- _id: '156'
- _id: '153'
- _id: '241'
keyword:
- Flow-forming
- Spinning
- Process Strategy
- Martensite Content
- Property Control
- Micromagnetic Measurement
- Metastable Austenitic Stainless Steel
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://popups.uliege.be/esaform21/index.php?id=2759
oa: '1'
place: Liège
publication_identifier:
eisbn:
- 978-2-87019-303-7
isbn:
- 978-2-87019-302-0
publication_status: published
publisher: ULiège Library
quality_controlled: '1'
status: public
title: Forming of metastable austenitic stainless steel tubes with axially graded
martensite content by flow-forming
type: conference
user_id: '36287'
year: '2021'
...
---
_id: '44367'
author:
- first_name: Stephan
full_name: Ahrens, Stephan
id: '89265'
last_name: Ahrens
citation:
ama: 'Ahrens S. Francesco (Franz) Stefani - Ein Regisseur mit barocken Anklägen.
. In: Jakob R, ed. Lichtspiele. Kino und Film im Brucker Land von den Anfängen
bis zum Siegeszug des Fernsehens. Bauernhofmuseum Jexhof; 2021:104-109.'
apa: Ahrens, S. (2021). Francesco (Franz) Stefani - Ein Regisseur mit barocken Anklägen.
. In R. Jakob (Ed.), Lichtspiele. Kino und Film im Brucker Land von den Anfängen
bis zum Siegeszug des Fernsehens. (pp. 104–109). Bauernhofmuseum Jexhof.
bibtex: '@inbook{Ahrens_2021, place={Schöngeising}, title={Francesco (Franz) Stefani
- Ein Regisseur mit barocken Anklägen. }, booktitle={Lichtspiele. Kino und Film
im Brucker Land von den Anfängen bis zum Siegeszug des Fernsehens.}, publisher={Bauernhofmuseum
Jexhof}, author={Ahrens, Stephan}, editor={Jakob, Reinhard}, year={2021}, pages={104–109}
}'
chicago: 'Ahrens, Stephan. “Francesco (Franz) Stefani - Ein Regisseur mit barocken
Anklägen. .” In Lichtspiele. Kino und Film im Brucker Land von den Anfängen
bis zum Siegeszug des Fernsehens., edited by Reinhard Jakob, 104–9. Schöngeising:
Bauernhofmuseum Jexhof, 2021.'
ieee: 'S. Ahrens, “Francesco (Franz) Stefani - Ein Regisseur mit barocken Anklägen.
,” in Lichtspiele. Kino und Film im Brucker Land von den Anfängen bis zum Siegeszug
des Fernsehens., R. Jakob, Ed. Schöngeising: Bauernhofmuseum Jexhof, 2021,
pp. 104–109.'
mla: Ahrens, Stephan. “Francesco (Franz) Stefani - Ein Regisseur mit barocken Anklägen.
.” Lichtspiele. Kino und Film im Brucker Land von den Anfängen bis zum Siegeszug
des Fernsehens., edited by Reinhard Jakob, Bauernhofmuseum Jexhof, 2021, pp.
104–09.
short: 'S. Ahrens, in: R. Jakob (Ed.), Lichtspiele. Kino und Film im Brucker Land
von den Anfängen bis zum Siegeszug des Fernsehens., Bauernhofmuseum Jexhof, Schöngeising,
2021, pp. 104–109.'
date_created: 2023-05-03T07:15:55Z
date_updated: 2023-05-03T07:16:07Z
department:
- _id: '731'
editor:
- first_name: Reinhard
full_name: Jakob, Reinhard
last_name: Jakob
language:
- iso: ger
page: 104-109
place: Schöngeising
publication: Lichtspiele. Kino und Film im Brucker Land von den Anfängen bis zum Siegeszug
des Fernsehens.
publisher: Bauernhofmuseum Jexhof
status: public
title: 'Francesco (Franz) Stefani - Ein Regisseur mit barocken Anklägen. '
type: book_chapter
user_id: '21240'
year: '2021'
...
---
_id: '24901'
abstract:
- lang: eng
text: 'AbstractIn child–robot interaction (cHRI)
research, many studies pursue the goal to develop interactive systems that can
be applied in everyday settings. For early education, increasingly, the setting
of a kindergarten is targeted. However, when cHRI and research are brought into
a kindergarten, a range of ethical and related procedural aspects have to be considered
and dealt with. While ethical models elaborated within other human–robot interaction
settings, e.g., assisted living contexts, can provide some important indicators
for relevant issues, we argue that it is important to start developing a systematic
approach to identify and tackle those ethical issues which rise with cHRI in kindergarten
settings on a more global level and address the impact of the technology from
a macroperspective beyond the effects on the individual. Based on our experience
in conducting studies with children in general and pedagogical considerations
on the role of the institution of kindergarten in specific, in this paper, we
enfold some relevant aspects that have barely been addressed in an explicit way
in current cHRI research. Four areas are analyzed and key ethical issues are identified
in each area: (1) the institutional setting of a kindergarten, (2) children as
a vulnerable group, (3) the caregivers’ role, and (4) pedagogical concepts. With
our considerations, we aim at (i) broadening the methodology of the current studies
within the area of cHRI, (ii) revalidate it based on our comprehensive empirical
experience with research in kindergarten settings, both laboratory and real-world
contexts, and (iii) provide a framework for the development of a more systematic
approach to address the ethical issues in cHRI research within kindergarten settings.'
author:
- first_name: Nils Frederik
full_name: Tolksdorf, Nils Frederik
id: '43289'
last_name: Tolksdorf
orcid: 0000-0001-6093-1219
- first_name: Scarlet
full_name: Siebert, Scarlet
last_name: Siebert
- first_name: Isabel
full_name: Zorn, Isabel
last_name: Zorn
- first_name: Ilona
full_name: Horwath, Ilona
id: '68836'
last_name: Horwath
- first_name: Katharina J.
full_name: Rohlfing, Katharina J.
id: '50352'
last_name: Rohlfing
citation:
ama: 'Tolksdorf NF, Siebert S, Zorn I, Horwath I, Rohlfing KJ. Ethical Considerations
of Applying Robots in Kindergarten Settings: Towards an Approach from a Macroperspective.
International Journal of Social Robotics. Published online 2021:129-140.
doi:10.1007/s12369-020-00622-3'
apa: 'Tolksdorf, N. F., Siebert, S., Zorn, I., Horwath, I., & Rohlfing, K. J.
(2021). Ethical Considerations of Applying Robots in Kindergarten Settings: Towards
an Approach from a Macroperspective. International Journal of Social Robotics,
129–140. https://doi.org/10.1007/s12369-020-00622-3'
bibtex: '@article{Tolksdorf_Siebert_Zorn_Horwath_Rohlfing_2021, title={Ethical Considerations
of Applying Robots in Kindergarten Settings: Towards an Approach from a Macroperspective},
DOI={10.1007/s12369-020-00622-3},
journal={International Journal of Social Robotics}, author={Tolksdorf, Nils Frederik
and Siebert, Scarlet and Zorn, Isabel and Horwath, Ilona and Rohlfing, Katharina
J.}, year={2021}, pages={129–140} }'
chicago: 'Tolksdorf, Nils Frederik, Scarlet Siebert, Isabel Zorn, Ilona Horwath,
and Katharina J. Rohlfing. “Ethical Considerations of Applying Robots in Kindergarten
Settings: Towards an Approach from a Macroperspective.” International Journal
of Social Robotics, 2021, 129–40. https://doi.org/10.1007/s12369-020-00622-3.'
ieee: 'N. F. Tolksdorf, S. Siebert, I. Zorn, I. Horwath, and K. J. Rohlfing, “Ethical
Considerations of Applying Robots in Kindergarten Settings: Towards an Approach
from a Macroperspective,” International Journal of Social Robotics, pp.
129–140, 2021, doi: 10.1007/s12369-020-00622-3.'
mla: 'Tolksdorf, Nils Frederik, et al. “Ethical Considerations of Applying Robots
in Kindergarten Settings: Towards an Approach from a Macroperspective.” International
Journal of Social Robotics, 2021, pp. 129–40, doi:10.1007/s12369-020-00622-3.'
short: N.F. Tolksdorf, S. Siebert, I. Zorn, I. Horwath, K.J. Rohlfing, International
Journal of Social Robotics (2021) 129–140.
date_created: 2021-09-23T11:03:50Z
date_updated: 2023-05-03T08:24:33Z
department:
- _id: '749'
doi: 10.1007/s12369-020-00622-3
language:
- iso: eng
page: 129-140
publication: International Journal of Social Robotics
publication_identifier:
issn:
- 1875-4791
- 1875-4805
publication_status: published
quality_controlled: '1'
status: public
title: 'Ethical Considerations of Applying Robots in Kindergarten Settings: Towards
an Approach from a Macroperspective'
type: journal_article
user_id: '68836'
year: '2021'
...