---
_id: '36332'
abstract:
- lang: eng
text: AlSi casting alloys combine excellent castability with high strength. Hence,
this group of alloys is often used in the automotive sector. The challenge for
this application is the brittle character of these alloys which leads to cracks
during joint formation when mechanical joining technologies are used. A rise in
ductility can be achieved by a considerable increase in the solidification rate
which results in grain refinement. High solidification rates can be realized in
twin–roll casting (TRC) by water-cooled rolls. Therefore, a hypoeutectic EN AC–AlSi9
(for European Norm - aluminum cast product) is manufactured by the TRC process
and analyzed. Subsequently, joining investigations are performed on castings in
as-cast and heat-treated condition using the self-piercing riveting process considering
the joint formation and the load-bearing capacity. Due to the fine microstructure,
the crack initiation can be avoided during joining, while maintaining the joining
parameters, especially by specimens in heat treatment conditions. Furthermore,
due to the extremely fine microstructure, the load-bearing capacity of the joint
can be significantly increased in terms of the maximum load-bearing force and
the energy absorbed.
article_number: '2200874'
article_type: original
author:
- first_name: Moritz
full_name: Neuser, Moritz
id: '32340'
last_name: Neuser
- first_name: Fabian
full_name: Kappe, Fabian
id: '66459'
last_name: Kappe
- first_name: Jakob
full_name: Ostermeier, Jakob
last_name: Ostermeier
- first_name: Jan Tobias
full_name: Krüger, Jan Tobias
id: '44307'
last_name: Krüger
orcid: 0000-0002-0827-9654
- first_name: Mathias
full_name: Bobbert, Mathias
id: '7850'
last_name: Bobbert
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
- first_name: Olexandr
full_name: Grydin, Olexandr
id: '43822'
last_name: Grydin
citation:
ama: Neuser M, Kappe F, Ostermeier J, et al. Mechanical Properties and Joinability
of AlSi9 Alloy Manufactured by Twin‐Roll Casting. Advanced Engineering Materials.
2022;24(10). doi:10.1002/adem.202200874
apa: Neuser, M., Kappe, F., Ostermeier, J., Krüger, J. T., Bobbert, M., Meschut,
G., Schaper, M., & Grydin, O. (2022). Mechanical Properties and Joinability
of AlSi9 Alloy Manufactured by Twin‐Roll Casting. Advanced Engineering Materials,
24(10), Article 2200874. https://doi.org/10.1002/adem.202200874
bibtex: '@article{Neuser_Kappe_Ostermeier_Krüger_Bobbert_Meschut_Schaper_Grydin_2022,
title={Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll
Casting}, volume={24}, DOI={10.1002/adem.202200874},
number={102200874}, journal={Advanced Engineering Materials}, publisher={Wiley},
author={Neuser, Moritz and Kappe, Fabian and Ostermeier, Jakob and Krüger, Jan
Tobias and Bobbert, Mathias and Meschut, Gerson and Schaper, Mirko and Grydin,
Olexandr}, year={2022} }'
chicago: Neuser, Moritz, Fabian Kappe, Jakob Ostermeier, Jan Tobias Krüger, Mathias
Bobbert, Gerson Meschut, Mirko Schaper, and Olexandr Grydin. “Mechanical Properties
and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting.” Advanced
Engineering Materials 24, no. 10 (2022). https://doi.org/10.1002/adem.202200874.
ieee: 'M. Neuser et al., “Mechanical Properties and Joinability of AlSi9
Alloy Manufactured by Twin‐Roll Casting,” Advanced Engineering Materials,
vol. 24, no. 10, Art. no. 2200874, 2022, doi: 10.1002/adem.202200874.'
mla: Neuser, Moritz, et al. “Mechanical Properties and Joinability of AlSi9 Alloy
Manufactured by Twin‐Roll Casting.” Advanced Engineering Materials, vol.
24, no. 10, 2200874, Wiley, 2022, doi:10.1002/adem.202200874.
short: M. Neuser, F. Kappe, J. Ostermeier, J.T. Krüger, M. Bobbert, G. Meschut,
M. Schaper, O. Grydin, Advanced Engineering Materials 24 (2022).
date_created: 2023-01-12T09:33:55Z
date_updated: 2024-03-14T15:22:33Z
department:
- _id: '158'
- _id: '157'
- _id: '321'
doi: 10.1002/adem.202200874
intvolume: ' 24'
issue: '10'
keyword:
- Condensed Matter Physics
- General Materials Science
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://onlinelibrary.wiley.com/doi/full/10.1002/adem.202200874
oa: '1'
project:
- _id: '136'
name: 'TRR 285 – A02: TRR 285 - Subproject A02'
- _id: '131'
name: 'TRR 285 - A: TRR 285 - Project Area A'
- _id: '133'
name: 'TRR 285 - C: TRR 285 - Project Area C'
- _id: '146'
name: 'TRR 285 – C02: TRR 285 - Subproject C02'
publication: Advanced Engineering Materials
publication_identifier:
issn:
- 1438-1656
- 1527-2648
publication_status: published
publisher: Wiley
quality_controlled: '1'
status: public
title: Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll
Casting
type: journal_article
user_id: '32340'
volume: 24
year: '2022'
...
---
_id: '29724'
abstract:
- lang: eng
text: In many manufacturing areas, multi-material designs are implemented
in which individual components are joined together to form complex structures
with numerous joints. For example, in the automotive sector, cast components are
used at the junctions of the body and joined with different types of sheet metal
and extruded profiles. To be able to join structures consisting of different materials,
alternative joining technologies have emerged in recent years. This includes clinching,
which allows assembling of two or more thin sheet metal and casting parts by solely
cold forming the material. Clinching the brittle and usually less ductile cast
aluminium alloys remains a challenge because the brittle character of the cast
aluminium alloys can cause cracks during the forming of the clinched joint. In
this study, the influence of the heat treatment time of an aluminium casting alloy
AlSi9 on the joinability in the clinching process is investigated. Specific heat
treatment of the naturally hard AlSi9 leads to a modification of the eutectic
microstructure, which can increase ductility. Based on this, it will be examined
if specific clinching die geometries can be used, which achieve an optimized geometrical
formation of the clinched joint. The load-bearing capacities of the clinched joints
are determined and compared by shear tensile and head tensile tests. Furthermore,
the joints are examined microscopically to investigate the influence of the heat
treatment on the failure behaviour during the load-bearing tests as well as crack
initiation within the joining process.
article_number: '146442072210758'
author:
- first_name: Moritz
full_name: Neuser, Moritz
id: '32340'
last_name: Neuser
- first_name: Max
full_name: Böhnke, Max
id: '45779'
last_name: Böhnke
- first_name: Olexandr
full_name: Grydin, Olexandr
id: '43822'
last_name: Grydin
- first_name: Mathias
full_name: Bobbert, Mathias
id: '7850'
last_name: Bobbert
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Neuser M, Böhnke M, Grydin O, Bobbert M, Schaper M, Meschut G. Influence of
heat treatment on the suitability for clinching of the aluminium casting alloy
AlSi9. Proceedings of the Institution of Mechanical Engineers, Part L: Journal
of Materials: Design and Applications. Published online 2022. doi:10.1177/14644207221075838'
apa: 'Neuser, M., Böhnke, M., Grydin, O., Bobbert, M., Schaper, M., & Meschut,
G. (2022). Influence of heat treatment on the suitability for clinching of the
aluminium casting alloy AlSi9. Proceedings of the Institution of Mechanical
Engineers, Part L: Journal of Materials: Design and Applications, Article
146442072210758. https://doi.org/10.1177/14644207221075838'
bibtex: '@article{Neuser_Böhnke_Grydin_Bobbert_Schaper_Meschut_2022, title={Influence
of heat treatment on the suitability for clinching of the aluminium casting alloy
AlSi9}, DOI={10.1177/14644207221075838},
number={146442072210758}, journal={Proceedings of the Institution of Mechanical
Engineers, Part L: Journal of Materials: Design and Applications}, publisher={SAGE
Publications}, author={Neuser, Moritz and Böhnke, Max and Grydin, Olexandr and
Bobbert, Mathias and Schaper, Mirko and Meschut, Gerson}, year={2022} }'
chicago: 'Neuser, Moritz, Max Böhnke, Olexandr Grydin, Mathias Bobbert, Mirko Schaper,
and Gerson Meschut. “Influence of Heat Treatment on the Suitability for Clinching
of the Aluminium Casting Alloy AlSi9.” Proceedings of the Institution of Mechanical
Engineers, Part L: Journal of Materials: Design and Applications, 2022. https://doi.org/10.1177/14644207221075838.'
ieee: 'M. Neuser, M. Böhnke, O. Grydin, M. Bobbert, M. Schaper, and G. Meschut,
“Influence of heat treatment on the suitability for clinching of the aluminium
casting alloy AlSi9,” Proceedings of the Institution of Mechanical Engineers,
Part L: Journal of Materials: Design and Applications, Art. no. 146442072210758,
2022, doi: 10.1177/14644207221075838.'
mla: 'Neuser, Moritz, et al. “Influence of Heat Treatment on the Suitability for
Clinching of the Aluminium Casting Alloy AlSi9.” Proceedings of the Institution
of Mechanical Engineers, Part L: Journal of Materials: Design and Applications,
146442072210758, SAGE Publications, 2022, doi:10.1177/14644207221075838.'
short: 'M. Neuser, M. Böhnke, O. Grydin, M. Bobbert, M. Schaper, G. Meschut, Proceedings
of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design
and Applications (2022).'
date_created: 2022-02-02T09:05:45Z
date_updated: 2024-03-14T15:20:44Z
department:
- _id: '630'
- _id: '158'
- _id: '157'
doi: 10.1177/14644207221075838
keyword:
- Mechanical Engineering
- General Materials Science
language:
- iso: eng
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '131'
name: 'TRR 285 - A: TRR 285 - Project Area A'
- _id: '136'
name: 'TRR 285 – A02: TRR 285 - Subproject A02'
- _id: '131'
name: 'TRR 285 - A: TRR 285 - Project Area A'
- _id: '135'
name: 'TRR 285 – A01: TRR 285 - Subproject A01'
publication: 'Proceedings of the Institution of Mechanical Engineers, Part L: Journal
of Materials: Design and Applications'
publication_identifier:
issn:
- 1464-4207
- 2041-3076
publication_status: published
publisher: SAGE Publications
quality_controlled: '1'
status: public
title: Influence of heat treatment on the suitability for clinching of the aluminium
casting alloy AlSi9
type: journal_article
user_id: '32340'
year: '2022'
...
---
_id: '29505'
abstract:
- lang: eng
text: In modern vehicle chassis, multi-material design is implemented to apply the
appropriate material for each functionality. In spaceframe technology, both sheet
metal and continuous cast are joined to castings at the nodal points of the chassis.
Since resistance spot welding is not an option when different materials are joined,
research is focusing on mechanical joining methods for multi-material designs.
To reduce weight and achieve the required strength, hardenable cast aluminium
alloys of the AlSi-system are widely used. Thus, 85–90% of aluminium castings
in the automotive industry are comprised of the AlSi-system. Due to the limited
weldability, mechanical joining is a suitable process. For this application, various
optimisation strategies are required to produce a crack-free joint, as the brittle
character of the AlSi alloy poses a challenge. Thus, adapted castings with appropriate
ductility are needed. Hence, in this study, the age-hardenable cast aluminium
alloy AlSi10Mg is investigated regarding the correlation of the different thicknesses,
the microstructural characteristics as well as the resulting mechanical properties.
A variation of the thicknesses leads to different solidification rates, which
in turn affect the microstructure formation and are decisive for the mechanical
properties of the casting as well as the joinability. For the investigation, plates
with thicknesses from 2.0 to 4.0 mm, each differing by 0.5 mm, are produced via
sand casting. Hence, the overall aim is to evaluate the joinability of AlSi10Mg
and derive conclusions concerning the microstructure and mechanical properties.
article_type: original
author:
- first_name: Moritz
full_name: Neuser, Moritz
id: '32340'
last_name: Neuser
- first_name: Olexandr
full_name: Grydin, Olexandr
id: '43822'
last_name: Grydin
- first_name: Y.
full_name: Frolov, Y.
last_name: Frolov
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: Neuser M, Grydin O, Frolov Y, Schaper M. Influence of solidification rates
and heat treatment on the mechanical performance and joinability of the cast aluminium
alloy AlSi10Mg. Production Engineering. Published online 2022. doi:10.1007/s11740-022-01106-1
apa: Neuser, M., Grydin, O., Frolov, Y., & Schaper, M. (2022). Influence of
solidification rates and heat treatment on the mechanical performance and joinability
of the cast aluminium alloy AlSi10Mg. Production Engineering. https://doi.org/10.1007/s11740-022-01106-1
bibtex: '@article{Neuser_Grydin_Frolov_Schaper_2022, title={Influence of solidification
rates and heat treatment on the mechanical performance and joinability of the
cast aluminium alloy AlSi10Mg}, DOI={10.1007/s11740-022-01106-1},
journal={Production Engineering}, publisher={Springer Science and Business Media
LLC}, author={Neuser, Moritz and Grydin, Olexandr and Frolov, Y. and Schaper,
Mirko}, year={2022} }'
chicago: Neuser, Moritz, Olexandr Grydin, Y. Frolov, and Mirko Schaper. “Influence
of Solidification Rates and Heat Treatment on the Mechanical Performance and Joinability
of the Cast Aluminium Alloy AlSi10Mg.” Production Engineering, 2022. https://doi.org/10.1007/s11740-022-01106-1.
ieee: 'M. Neuser, O. Grydin, Y. Frolov, and M. Schaper, “Influence of solidification
rates and heat treatment on the mechanical performance and joinability of the
cast aluminium alloy AlSi10Mg,” Production Engineering, 2022, doi: 10.1007/s11740-022-01106-1.'
mla: Neuser, Moritz, et al. “Influence of Solidification Rates and Heat Treatment
on the Mechanical Performance and Joinability of the Cast Aluminium Alloy AlSi10Mg.”
Production Engineering, Springer Science and Business Media LLC, 2022,
doi:10.1007/s11740-022-01106-1.
short: M. Neuser, O. Grydin, Y. Frolov, M. Schaper, Production Engineering (2022).
date_created: 2022-01-24T08:27:48Z
date_updated: 2024-03-14T15:21:51Z
department:
- _id: '43'
- _id: '158'
- _id: '321'
- _id: '630'
doi: 10.1007/s11740-022-01106-1
keyword:
- Industrial and Manufacturing Engineering
- Mechanical Engineering
language:
- iso: eng
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '131'
name: 'TRR 285 - A: TRR 285 - Project Area A'
- _id: '136'
name: 'TRR 285 – A02: TRR 285 - Subproject A02'
publication: Production Engineering
publication_identifier:
issn:
- 0944-6524
- 1863-7353
publication_status: published
publisher: Springer Science and Business Media LLC
quality_controlled: '1'
status: public
title: Influence of solidification rates and heat treatment on the mechanical performance
and joinability of the cast aluminium alloy AlSi10Mg
type: journal_article
user_id: '32340'
year: '2022'
...
---
_id: '31828'
article_number: '100108'
author:
- first_name: Robert
full_name: Kupfer, Robert
last_name: Kupfer
- first_name: Daniel
full_name: Köhler, Daniel
last_name: Köhler
- first_name: David
full_name: Römisch, David
last_name: Römisch
- first_name: Simon
full_name: Wituschek, Simon
last_name: Wituschek
- first_name: Lars
full_name: Ewenz, Lars
last_name: Ewenz
- first_name: Jan
full_name: Kalich, Jan
last_name: Kalich
- first_name: Deborah
full_name: Weiß, Deborah
id: '45673'
last_name: Weiß
- first_name: Behdad
full_name: Sadeghian, Behdad
last_name: Sadeghian
- first_name: Matthias
full_name: Busch, Matthias
last_name: Busch
- first_name: Jan
full_name: Krüger, Jan
last_name: Krüger
- first_name: Moritz
full_name: Neuser, Moritz
id: '32340'
last_name: Neuser
- first_name: Olexandr
full_name: Grydin, Olexandr
id: '43822'
last_name: Grydin
- first_name: Max
full_name: Böhnke, Max
id: '45779'
last_name: Böhnke
- first_name: Christian Roman
full_name: Bielak, Christian Roman
id: '34782'
last_name: Bielak
- first_name: Juliane
full_name: Troschitz, Juliane
last_name: Troschitz
citation:
ama: Kupfer R, Köhler D, Römisch D, et al. Clinching of Aluminum Materials – Methods
for the Continuous Characterization of Process, Microstructure and Properties.
Journal of Advanced Joining Processes. 2022;5. doi:10.1016/j.jajp.2022.100108
apa: Kupfer, R., Köhler, D., Römisch, D., Wituschek, S., Ewenz, L., Kalich, J.,
Weiß, D., Sadeghian, B., Busch, M., Krüger, J., Neuser, M., Grydin, O., Böhnke,
M., Bielak, C. R., & Troschitz, J. (2022). Clinching of Aluminum Materials
– Methods for the Continuous Characterization of Process, Microstructure and Properties.
Journal of Advanced Joining Processes, 5, Article 100108. https://doi.org/10.1016/j.jajp.2022.100108
bibtex: '@article{Kupfer_Köhler_Römisch_Wituschek_Ewenz_Kalich_Weiß_Sadeghian_Busch_Krüger_et
al._2022, title={Clinching of Aluminum Materials – Methods for the Continuous
Characterization of Process, Microstructure and Properties}, volume={5}, DOI={10.1016/j.jajp.2022.100108},
number={100108}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier
BV}, author={Kupfer, Robert and Köhler, Daniel and Römisch, David and Wituschek,
Simon and Ewenz, Lars and Kalich, Jan and Weiß, Deborah and Sadeghian, Behdad
and Busch, Matthias and Krüger, Jan and et al.}, year={2022} }'
chicago: Kupfer, Robert, Daniel Köhler, David Römisch, Simon Wituschek, Lars Ewenz,
Jan Kalich, Deborah Weiß, et al. “Clinching of Aluminum Materials – Methods for
the Continuous Characterization of Process, Microstructure and Properties.” Journal
of Advanced Joining Processes 5 (2022). https://doi.org/10.1016/j.jajp.2022.100108.
ieee: 'R. Kupfer et al., “Clinching of Aluminum Materials – Methods for the
Continuous Characterization of Process, Microstructure and Properties,” Journal
of Advanced Joining Processes, vol. 5, Art. no. 100108, 2022, doi: 10.1016/j.jajp.2022.100108.'
mla: Kupfer, Robert, et al. “Clinching of Aluminum Materials – Methods for the Continuous
Characterization of Process, Microstructure and Properties.” Journal of Advanced
Joining Processes, vol. 5, 100108, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100108.
short: R. Kupfer, D. Köhler, D. Römisch, S. Wituschek, L. Ewenz, J. Kalich, D. Weiß,
B. Sadeghian, M. Busch, J. Krüger, M. Neuser, O. Grydin, M. Böhnke, C.R. Bielak,
J. Troschitz, Journal of Advanced Joining Processes 5 (2022).
date_created: 2022-06-09T06:23:00Z
date_updated: 2024-03-14T15:22:46Z
department:
- _id: '157'
- _id: '158'
doi: 10.1016/j.jajp.2022.100108
intvolume: ' 5'
keyword:
- Mechanical Engineering
- Mechanics of Materials
- Engineering (miscellaneous)
- Chemical Engineering (miscellaneous)
language:
- iso: eng
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '131'
name: 'TRR 285 - A: TRR 285 - Project Area A'
- _id: '59'
grant_number: '231447078'
name: 'TRR 142 - A02: TRR 142 - Subproject A02'
publication: Journal of Advanced Joining Processes
publication_identifier:
issn:
- 2666-3309
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Clinching of Aluminum Materials – Methods for the Continuous Characterization
of Process, Microstructure and Properties
type: journal_article
user_id: '32340'
volume: 5
year: '2022'
...
---
_id: '31238'
article_number: '100108'
author:
- first_name: Robert
full_name: Kupfer, Robert
last_name: Kupfer
- first_name: Daniel
full_name: Köhler, Daniel
last_name: Köhler
- first_name: David
full_name: Römisch, David
last_name: Römisch
- first_name: Simon
full_name: Wituschek, Simon
last_name: Wituschek
- first_name: Lars
full_name: Ewenz, Lars
last_name: Ewenz
- first_name: Jan
full_name: Kalich, Jan
last_name: Kalich
- first_name: Deborah
full_name: Weiß, Deborah
id: '45673'
last_name: Weiß
- first_name: Behdad
full_name: Sadeghian, Behdad
last_name: Sadeghian
- first_name: Matthias
full_name: Busch, Matthias
last_name: Busch
- first_name: Jan Tobias
full_name: Krüger, Jan Tobias
id: '44307'
last_name: Krüger
orcid: 0000-0002-0827-9654
- first_name: Moritz
full_name: Neuser, Moritz
id: '32340'
last_name: Neuser
- first_name: Olexandr
full_name: Grydin, Olexandr
id: '43822'
last_name: Grydin
- first_name: Max
full_name: Böhnke, Max
id: '45779'
last_name: Böhnke
- first_name: Christian-Roman
full_name: Bielak, Christian-Roman
last_name: Bielak
- first_name: Juliane
full_name: Troschitz, Juliane
last_name: Troschitz
citation:
ama: Kupfer R, Köhler D, Römisch D, et al. Clinching of Aluminum Materials – Methods
for the Continuous Characterization of Process, Microstructure and Properties.
Journal of Advanced Joining Processes. Published online 2022. doi:10.1016/j.jajp.2022.100108
apa: Kupfer, R., Köhler, D., Römisch, D., Wituschek, S., Ewenz, L., Kalich, J.,
Weiß, D., Sadeghian, B., Busch, M., Krüger, J. T., Neuser, M., Grydin, O., Böhnke,
M., Bielak, C.-R., & Troschitz, J. (2022). Clinching of Aluminum Materials
– Methods for the Continuous Characterization of Process, Microstructure and Properties.
Journal of Advanced Joining Processes, Article 100108. https://doi.org/10.1016/j.jajp.2022.100108
bibtex: '@article{Kupfer_Köhler_Römisch_Wituschek_Ewenz_Kalich_Weiß_Sadeghian_Busch_Krüger_et
al._2022, title={Clinching of Aluminum Materials – Methods for the Continuous
Characterization of Process, Microstructure and Properties}, DOI={10.1016/j.jajp.2022.100108},
number={100108}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier
BV}, author={Kupfer, Robert and Köhler, Daniel and Römisch, David and Wituschek,
Simon and Ewenz, Lars and Kalich, Jan and Weiß, Deborah and Sadeghian, Behdad
and Busch, Matthias and Krüger, Jan Tobias and et al.}, year={2022} }'
chicago: Kupfer, Robert, Daniel Köhler, David Römisch, Simon Wituschek, Lars Ewenz,
Jan Kalich, Deborah Weiß, et al. “Clinching of Aluminum Materials – Methods for
the Continuous Characterization of Process, Microstructure and Properties.” Journal
of Advanced Joining Processes, 2022. https://doi.org/10.1016/j.jajp.2022.100108.
ieee: 'R. Kupfer et al., “Clinching of Aluminum Materials – Methods for the
Continuous Characterization of Process, Microstructure and Properties,” Journal
of Advanced Joining Processes, Art. no. 100108, 2022, doi: 10.1016/j.jajp.2022.100108.'
mla: Kupfer, Robert, et al. “Clinching of Aluminum Materials – Methods for the Continuous
Characterization of Process, Microstructure and Properties.” Journal of Advanced
Joining Processes, 100108, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100108.
short: R. Kupfer, D. Köhler, D. Römisch, S. Wituschek, L. Ewenz, J. Kalich, D. Weiß,
B. Sadeghian, M. Busch, J.T. Krüger, M. Neuser, O. Grydin, M. Böhnke, C.-R. Bielak,
J. Troschitz, Journal of Advanced Joining Processes (2022).
date_created: 2022-05-12T13:48:16Z
date_updated: 2024-03-14T15:23:30Z
department:
- _id: '158'
doi: 10.1016/j.jajp.2022.100108
keyword:
- Mechanical Engineering
- Mechanics of Materials
- Engineering (miscellaneous)
- Chemical Engineering (miscellaneous)
language:
- iso: eng
project:
- _id: '131'
name: 'TRR 285 - A: TRR 285 - Project Area A'
- _id: '136'
name: 'TRR 285 – A02: TRR 285 - Subproject A02'
publication: Journal of Advanced Joining Processes
publication_identifier:
issn:
- 2666-3309
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Clinching of Aluminum Materials – Methods for the Continuous Characterization
of Process, Microstructure and Properties
type: journal_article
user_id: '32340'
year: '2022'
...
---
_id: '29771'
author:
- first_name: Olexandr
full_name: Grydin, Olexandr
id: '43822'
last_name: Grydin
- first_name: Dag
full_name: Mortensen, Dag
last_name: Mortensen
- first_name: Moritz
full_name: Neuser, Moritz
id: '32340'
last_name: Neuser
- first_name: Dag
full_name: Lindholm, Dag
last_name: Lindholm
- first_name: Hallvard G.
full_name: Fjaer, Hallvard G.
last_name: Fjaer
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: 'Grydin O, Mortensen D, Neuser M, Lindholm D, Fjaer HG, Schaper M. Numerical
and Experimental Investigation of Heat Transfer in the Solidification-Deformation
Zone During Twin-Roll Casting of Aluminum Strips. In: Light Metals 2022.
Springer International Publishing; 2022. doi:10.1007/978-3-030-92529-1_96'
apa: Grydin, O., Mortensen, D., Neuser, M., Lindholm, D., Fjaer, H. G., & Schaper,
M. (2022). Numerical and Experimental Investigation of Heat Transfer in the Solidification-Deformation
Zone During Twin-Roll Casting of Aluminum Strips. In Light Metals 2022.
Springer International Publishing. https://doi.org/10.1007/978-3-030-92529-1_96
bibtex: '@inbook{Grydin_Mortensen_Neuser_Lindholm_Fjaer_Schaper_2022, place={Cham},
title={Numerical and Experimental Investigation of Heat Transfer in the Solidification-Deformation
Zone During Twin-Roll Casting of Aluminum Strips}, DOI={10.1007/978-3-030-92529-1_96},
booktitle={Light Metals 2022}, publisher={Springer International Publishing},
author={Grydin, Olexandr and Mortensen, Dag and Neuser, Moritz and Lindholm, Dag
and Fjaer, Hallvard G. and Schaper, Mirko}, year={2022} }'
chicago: 'Grydin, Olexandr, Dag Mortensen, Moritz Neuser, Dag Lindholm, Hallvard
G. Fjaer, and Mirko Schaper. “Numerical and Experimental Investigation of Heat
Transfer in the Solidification-Deformation Zone During Twin-Roll Casting of Aluminum
Strips.” In Light Metals 2022. Cham: Springer International Publishing,
2022. https://doi.org/10.1007/978-3-030-92529-1_96.'
ieee: 'O. Grydin, D. Mortensen, M. Neuser, D. Lindholm, H. G. Fjaer, and M. Schaper,
“Numerical and Experimental Investigation of Heat Transfer in the Solidification-Deformation
Zone During Twin-Roll Casting of Aluminum Strips,” in Light Metals 2022,
Cham: Springer International Publishing, 2022.'
mla: Grydin, Olexandr, et al. “Numerical and Experimental Investigation of Heat
Transfer in the Solidification-Deformation Zone During Twin-Roll Casting of Aluminum
Strips.” Light Metals 2022, Springer International Publishing, 2022, doi:10.1007/978-3-030-92529-1_96.
short: 'O. Grydin, D. Mortensen, M. Neuser, D. Lindholm, H.G. Fjaer, M. Schaper,
in: Light Metals 2022, Springer International Publishing, Cham, 2022.'
date_created: 2022-02-07T18:02:27Z
date_updated: 2024-03-14T15:24:47Z
department:
- _id: '158'
- _id: '630'
doi: 10.1007/978-3-030-92529-1_96
language:
- iso: eng
place: Cham
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '136'
name: 'TRR 285 – A02: TRR 285 - Subproject A02'
publication: Light Metals 2022
publication_identifier:
isbn:
- '9783030925284'
- '9783030925291'
issn:
- 2367-1181
- 2367-1696
publication_status: published
publisher: Springer International Publishing
quality_controlled: '1'
status: public
title: Numerical and Experimental Investigation of Heat Transfer in the Solidification-Deformation
Zone During Twin-Roll Casting of Aluminum Strips
type: book_chapter
user_id: '32340'
year: '2022'
...
---
_id: '52613'
abstract:
- lang: eng
text: During resistance spot welding of zinc-coated advanced high-strength
steels (AHSSs) for automotive production, liquid metal embrittlement (LME) cracking
may occur in the event of a combination of various unfavorable influences. In
this study, the interactions of different welding current levels and weld times
on the tendency for LME cracking in third-generation AHSSs were investigated.
LME manifested itself as high-penetration cracks around the circumference of the
spot welds for welding currents closely below the expulsion limit. At the same
time, the observed tendency for LME cracking showed no direct correlation with
the overall heat input of the investigated welding processes. To identify a reliable
indicator of the tendency for LME cracking, the local strain rate at the origin
of the observed cracks was analyzed over the course of the welding process via
finite element simulation. While the local strain rate showed a good correlation
with the process-specific LME cracking tendency, it was difficult to interpret
due to its discontinuous course. Therefore, based on the experimental measurement
of electrode displacement during welding, electrode indentation velocity was proposed
as a descriptive indicator for quantifying cracking tendency.
author:
- first_name: Christoph
full_name: Böhne, Christoph
id: '22483'
last_name: Böhne
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: MAX
full_name: BIEGLER, MAX
last_name: BIEGLER
- first_name: MICHAEL
full_name: RETHMEIER, MICHAEL
last_name: RETHMEIER
citation:
ama: Böhne C, Meschut G, BIEGLER M, RETHMEIER M. The Influence of Electrode Indentation
Rate on LME Formation during RSW. Welding Journal. 2022;101(7):197-207.
doi:10.29391/2022.101.015
apa: Böhne, C., Meschut, G., BIEGLER, M., & RETHMEIER, M. (2022). The Influence
of Electrode Indentation Rate on LME Formation during RSW. Welding Journal,
101(7), 197–207. https://doi.org/10.29391/2022.101.015
bibtex: '@article{Böhne_Meschut_BIEGLER_RETHMEIER_2022, title={The Influence of
Electrode Indentation Rate on LME Formation during RSW}, volume={101}, DOI={10.29391/2022.101.015}, number={7},
journal={Welding Journal}, publisher={American Welding Society}, author={Böhne,
Christoph and Meschut, Gerson and BIEGLER, MAX and RETHMEIER, MICHAEL}, year={2022},
pages={197–207} }'
chicago: 'Böhne, Christoph, Gerson Meschut, MAX BIEGLER, and MICHAEL RETHMEIER.
“The Influence of Electrode Indentation Rate on LME Formation during RSW.” Welding
Journal 101, no. 7 (2022): 197–207. https://doi.org/10.29391/2022.101.015.'
ieee: 'C. Böhne, G. Meschut, M. BIEGLER, and M. RETHMEIER, “The Influence of Electrode
Indentation Rate on LME Formation during RSW,” Welding Journal, vol. 101,
no. 7, pp. 197–207, 2022, doi: 10.29391/2022.101.015.'
mla: Böhne, Christoph, et al. “The Influence of Electrode Indentation Rate on LME
Formation during RSW.” Welding Journal, vol. 101, no. 7, American Welding
Society, 2022, pp. 197–207, doi:10.29391/2022.101.015.
short: C. Böhne, G. Meschut, M. BIEGLER, M. RETHMEIER, Welding Journal 101 (2022)
197–207.
date_created: 2024-03-18T11:56:12Z
date_updated: 2024-03-18T12:43:49Z
department:
- _id: '157'
doi: 10.29391/2022.101.015
intvolume: ' 101'
issue: '7'
keyword:
- Metals and Alloys
- Mechanical Engineering
- Mechanics of Materials
language:
- iso: eng
page: 197-207
publication: Welding Journal
publication_identifier:
issn:
- 0043-2296
- 2689-0445
publication_status: published
publisher: American Welding Society
quality_controlled: '1'
status: public
title: The Influence of Electrode Indentation Rate on LME Formation during RSW
type: journal_article
user_id: '60398'
volume: 101
year: '2022'
...
---
_id: '52615'
author:
- first_name: Christoph
full_name: Böhne, Christoph
id: '22483'
last_name: Böhne
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: Böhne C, Meschut G. Reduction of flange widths in resistance spot welding by
application of eccentric electrode cap geometries. Welding and Cutting.
2022;3:208-212. doi:10.53192/WAC202203208
apa: Böhne, C., & Meschut, G. (2022). Reduction of flange widths in resistance
spot welding by application of eccentric electrode cap geometries. Welding
and Cutting, 3, 208–212. https://doi.org/10.53192/WAC202203208
bibtex: '@article{Böhne_Meschut_2022, title={Reduction of flange widths in resistance
spot welding by application of eccentric electrode cap geometries}, volume={3},
DOI={10.53192/WAC202203208 },
journal={Welding and Cutting}, author={Böhne, Christoph and Meschut, Gerson},
year={2022}, pages={208–212} }'
chicago: 'Böhne, Christoph, and Gerson Meschut. “Reduction of Flange Widths in Resistance
Spot Welding by Application of Eccentric Electrode Cap Geometries.” Welding
and Cutting 3 (2022): 208–12. https://doi.org/10.53192/WAC202203208 .'
ieee: 'C. Böhne and G. Meschut, “Reduction of flange widths in resistance spot welding
by application of eccentric electrode cap geometries,” Welding and Cutting,
vol. 3, pp. 208–212, 2022, doi: 10.53192/WAC202203208 .'
mla: Böhne, Christoph, and Gerson Meschut. “Reduction of Flange Widths in Resistance
Spot Welding by Application of Eccentric Electrode Cap Geometries.” Welding
and Cutting, vol. 3, 2022, pp. 208–12, doi:10.53192/WAC202203208 .
short: C. Böhne, G. Meschut, Welding and Cutting 3 (2022) 208–212.
date_created: 2024-03-18T12:04:36Z
date_updated: 2024-03-18T12:43:36Z
department:
- _id: '157'
doi: '10.53192/WAC202203208 '
intvolume: ' 3'
language:
- iso: eng
page: 208-212
publication: Welding and Cutting
publication_status: published
quality_controlled: '1'
status: public
title: Reduction of flange widths in resistance spot welding by application of eccentric
electrode cap geometries
type: journal_article
user_id: '60398'
volume: 3
year: '2022'
...
---
_id: '32283'
author:
- first_name: Tobias
full_name: Schmolke, Tobias
id: '44759'
last_name: Schmolke
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Florian
full_name: Rieker, Florian
last_name: Rieker
- first_name: Dennis
full_name: Meinderink, Dennis
id: '32378'
last_name: Meinderink
orcid: 0000-0002-2755-6514
- first_name: Guido
full_name: Grundmeier, Guido
id: '194'
last_name: Grundmeier
citation:
ama: Schmolke T, Meschut G, Rieker F, Meinderink D, Grundmeier G. Untersuchung von
Klebverbindungen für Batteriegehäuse. adhäsion KLEBEN & DICHTEN . 2022;66:40-43.
doi:https://doi.org/10.1007/s35145-022-0596-9
apa: Schmolke, T., Meschut, G., Rieker, F., Meinderink, D., & Grundmeier, G.
(2022). Untersuchung von Klebverbindungen für Batteriegehäuse. adhäsion KLEBEN
& DICHTEN , 66, 40–43. https://doi.org/10.1007/s35145-022-0596-9
bibtex: '@article{Schmolke_Meschut_Rieker_Meinderink_Grundmeier_2022, title={Untersuchung
von Klebverbindungen für Batteriegehäuse}, volume={66}, DOI={https://doi.org/10.1007/s35145-022-0596-9},
journal={adhäsion KLEBEN & DICHTEN }, publisher={Springer Nature}, author={Schmolke,
Tobias and Meschut, Gerson and Rieker, Florian and Meinderink, Dennis and Grundmeier,
Guido}, year={2022}, pages={40–43} }'
chicago: 'Schmolke, Tobias, Gerson Meschut, Florian Rieker, Dennis Meinderink, and
Guido Grundmeier. “Untersuchung von Klebverbindungen für Batteriegehäuse.” adhäsion
KLEBEN & DICHTEN 66 (2022): 40–43. https://doi.org/10.1007/s35145-022-0596-9.'
ieee: 'T. Schmolke, G. Meschut, F. Rieker, D. Meinderink, and G. Grundmeier, “Untersuchung
von Klebverbindungen für Batteriegehäuse,” adhäsion KLEBEN & DICHTEN ,
vol. 66, pp. 40–43, 2022, doi: https://doi.org/10.1007/s35145-022-0596-9.'
mla: Schmolke, Tobias, et al. “Untersuchung von Klebverbindungen für Batteriegehäuse.”
adhäsion KLEBEN & DICHTEN , vol. 66, Springer Nature, 2022, pp. 40–43,
doi:https://doi.org/10.1007/s35145-022-0596-9.
short: T. Schmolke, G. Meschut, F. Rieker, D. Meinderink, G. Grundmeier, adhäsion
KLEBEN & DICHTEN 66 (2022) 40–43.
date_created: 2022-06-29T11:41:25Z
date_updated: 2024-03-19T06:08:14Z
department:
- _id: '157'
- _id: '302'
doi: https://doi.org/10.1007/s35145-022-0596-9
intvolume: ' 66'
language:
- iso: ger
page: 40-43
publication: 'adhäsion KLEBEN & DICHTEN '
publication_status: published
publisher: Springer Nature
status: public
title: Untersuchung von Klebverbindungen für Batteriegehäuse
type: journal_article
user_id: '41235'
volume: 66
year: '2022'
...
---
_id: '51666'
author:
- first_name: Nico
full_name: Goncz, Nico
last_name: Goncz
- first_name: SathishKumar
full_name: Ponusamy, SathishKumar
id: '77383'
last_name: Ponusamy
citation:
ama: Goncz N, Ponusamy S. Untersuchung Der Charakterisierung Der Partikelform
Und Deren Einfluss Auf Die Fließfähigkeit.; 2022.
apa: Goncz, N., & Ponusamy, S. (2022). Untersuchung der Charakterisierung
der Partikelform und deren Einfluss auf die Fließfähigkeit.
bibtex: '@book{Goncz_Ponusamy_2022, place={Paderborn University}, title={Untersuchung
der Charakterisierung der Partikelform und deren Einfluss auf die Fließfähigkeit},
author={Goncz, Nico and Ponusamy, SathishKumar}, year={2022} }'
chicago: Goncz, Nico, and SathishKumar Ponusamy. Untersuchung Der Charakterisierung
Der Partikelform Und Deren Einfluss Auf Die Fließfähigkeit. Paderborn University,
2022.
ieee: N. Goncz and S. Ponusamy, Untersuchung der Charakterisierung der Partikelform
und deren Einfluss auf die Fließfähigkeit. Paderborn University, 2022.
mla: Goncz, Nico, and SathishKumar Ponusamy. Untersuchung Der Charakterisierung
Der Partikelform Und Deren Einfluss Auf Die Fließfähigkeit. 2022.
short: N. Goncz, S. Ponusamy, Untersuchung Der Charakterisierung Der Partikelform
Und Deren Einfluss Auf Die Fließfähigkeit, Paderborn University, 2022.
date_created: 2024-02-21T00:13:14Z
date_updated: 2024-03-19T10:12:06Z
department:
- _id: '150'
language:
- iso: eng
place: Paderborn University
status: public
supervisor:
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
orcid: 000-0001-8590-1921
- first_name: Steffen
full_name: Jesinghausen, Steffen
id: '3959'
last_name: Jesinghausen
orcid: https://orcid.org/0000-0003-2611-5298
title: Untersuchung der Charakterisierung der Partikelform und deren Einfluss auf
die Fließfähigkeit
type: bachelorsthesis
user_id: '77383'
year: '2022'
...
---
_id: '51662'
author:
- first_name: Ewald
full_name: Keksel, Ewald
last_name: Keksel
- first_name: SathishKumar
full_name: Ponusamy, SathishKumar
id: '77383'
last_name: Ponusamy
citation:
ama: Keksel E, Ponusamy S. Untersuchung Eines Neuen Dynamischen- Mechanischen
Partikelverrundungsprozesses (Studienarbeit).; 2022.
apa: Keksel, E., & Ponusamy, S. (2022). Untersuchung eines neuen dynamischen-
mechanischen Partikelverrundungsprozesses (Studienarbeit).
bibtex: '@book{Keksel_Ponusamy_2022, place={Paderborn University}, title={Untersuchung
eines neuen dynamischen- mechanischen Partikelverrundungsprozesses (Studienarbeit)},
author={Keksel, Ewald and Ponusamy, SathishKumar}, year={2022} }'
chicago: Keksel, Ewald, and SathishKumar Ponusamy. Untersuchung Eines Neuen Dynamischen-
Mechanischen Partikelverrundungsprozesses (Studienarbeit). Paderborn University,
2022.
ieee: E. Keksel and S. Ponusamy, Untersuchung eines neuen dynamischen- mechanischen
Partikelverrundungsprozesses (Studienarbeit). Paderborn University, 2022.
mla: Keksel, Ewald, and SathishKumar Ponusamy. Untersuchung Eines Neuen Dynamischen-
Mechanischen Partikelverrundungsprozesses (Studienarbeit). 2022.
short: E. Keksel, S. Ponusamy, Untersuchung Eines Neuen Dynamischen- Mechanischen
Partikelverrundungsprozesses (Studienarbeit), Paderborn University, 2022.
date_created: 2024-02-21T00:06:11Z
date_updated: 2024-03-19T10:15:17Z
department:
- _id: '150'
language:
- iso: eng
place: Paderborn University
status: public
supervisor:
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
orcid: 000-0001-8590-1921
title: Untersuchung eines neuen dynamischen- mechanischen Partikelverrundungsprozesses
(Studienarbeit)
type: mastersthesis
user_id: '77383'
year: '2022'
...
---
_id: '51664'
author:
- first_name: Ahmad
full_name: Almohammad, Ahmad
last_name: Almohammad
- first_name: SathishKumar
full_name: Ponusamy, SathishKumar
id: '77383'
last_name: Ponusamy
citation:
ama: Almohammad A, Ponusamy S. Untersuchung Der Polymer-Zerkleinerung in Einer
Kryo-Prallmühle (Studienarbeit).; 2022.
apa: Almohammad, A., & Ponusamy, S. (2022). Untersuchung der Polymer-Zerkleinerung
in einer Kryo-Prallmühle (Studienarbeit).
bibtex: '@book{Almohammad_Ponusamy_2022, place={Paderborn University}, title={Untersuchung
der Polymer-Zerkleinerung in einer Kryo-Prallmühle (Studienarbeit)}, author={Almohammad,
Ahmad and Ponusamy, SathishKumar}, year={2022} }'
chicago: Almohammad, Ahmad, and SathishKumar Ponusamy. Untersuchung Der Polymer-Zerkleinerung
in Einer Kryo-Prallmühle (Studienarbeit). Paderborn University, 2022.
ieee: A. Almohammad and S. Ponusamy, Untersuchung der Polymer-Zerkleinerung in
einer Kryo-Prallmühle (Studienarbeit). Paderborn University, 2022.
mla: Almohammad, Ahmad, and SathishKumar Ponusamy. Untersuchung Der Polymer-Zerkleinerung
in Einer Kryo-Prallmühle (Studienarbeit). 2022.
short: A. Almohammad, S. Ponusamy, Untersuchung Der Polymer-Zerkleinerung in Einer
Kryo-Prallmühle (Studienarbeit), Paderborn University, 2022.
date_created: 2024-02-21T00:09:11Z
date_updated: 2024-03-19T10:14:35Z
department:
- _id: '150'
language:
- iso: eng
place: Paderborn University
status: public
supervisor:
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
orcid: 000-0001-8590-1921
title: Untersuchung der Polymer-Zerkleinerung in einer Kryo-Prallmühle (Studienarbeit)
type: mastersthesis
user_id: '77383'
year: '2022'
...
---
_id: '44661'
author:
- first_name: Birgit
full_name: Eickelmann, Birgit
id: '40387'
last_name: Eickelmann
- first_name: R.
full_name: Lorenz, R.
last_name: Lorenz
- first_name: M.
full_name: Endberg, M.
last_name: Endberg
- first_name: Marius
full_name: Domke, Marius
id: '29602'
last_name: Domke
citation:
ama: 'Eickelmann B, Lorenz R, Endberg M, Domke M. Digitalisierungsbezogene Fortbildung
und professionelle Lerngelegenheiten von Lehrpersonen der Sekundarstufe I in Deutschland
und im Bundesländervergleich. In: Lorenz R, Yotyodying S, Eickelmann B, Endberg
M, eds. Schule digital – der Länderindikator 2021. Lehren und Lernen mit digitalen
Medien in der Sekundarstufe I in Deutschland im Bundesländervergleich und im Trend
seit 2017 . Waxmann Verlag; 2022:187-210.'
apa: Eickelmann, B., Lorenz, R., Endberg, M., & Domke, M. (2022). Digitalisierungsbezogene
Fortbildung und professionelle Lerngelegenheiten von Lehrpersonen der Sekundarstufe
I in Deutschland und im Bundesländervergleich. In R. Lorenz, S. Yotyodying, B.
Eickelmann, & M. Endberg (Eds.), Schule digital – der Länderindikator 2021.
Lehren und Lernen mit digitalen Medien in der Sekundarstufe I in Deutschland im
Bundesländervergleich und im Trend seit 2017 (pp. 187–210). Waxmann Verlag.
bibtex: '@inbook{Eickelmann_Lorenz_Endberg_Domke_2022, place={Münster}, title={Digitalisierungsbezogene
Fortbildung und professionelle Lerngelegenheiten von Lehrpersonen der Sekundarstufe
I in Deutschland und im Bundesländervergleich}, booktitle={Schule digital – der
Länderindikator 2021. Lehren und Lernen mit digitalen Medien in der Sekundarstufe
I in Deutschland im Bundesländervergleich und im Trend seit 2017 }, publisher={Waxmann
Verlag}, author={Eickelmann, Birgit and Lorenz, R. and Endberg, M. and Domke,
Marius}, editor={Lorenz, R. and Yotyodying, S. and Eickelmann, Birgit and Endberg,
M.}, year={2022}, pages={187–210} }'
chicago: 'Eickelmann, Birgit, R. Lorenz, M. Endberg, and Marius Domke. “Digitalisierungsbezogene
Fortbildung und professionelle Lerngelegenheiten von Lehrpersonen der Sekundarstufe
I in Deutschland und im Bundesländervergleich.” In Schule digital – der Länderindikator
2021. Lehren und Lernen mit digitalen Medien in der Sekundarstufe I in Deutschland
im Bundesländervergleich und im Trend seit 2017 , edited by R. Lorenz, S.
Yotyodying, Birgit Eickelmann, and M. Endberg, 187–210. Münster: Waxmann Verlag,
2022.'
ieee: 'B. Eickelmann, R. Lorenz, M. Endberg, and M. Domke, “Digitalisierungsbezogene
Fortbildung und professionelle Lerngelegenheiten von Lehrpersonen der Sekundarstufe
I in Deutschland und im Bundesländervergleich,” in Schule digital – der Länderindikator
2021. Lehren und Lernen mit digitalen Medien in der Sekundarstufe I in Deutschland
im Bundesländervergleich und im Trend seit 2017 , R. Lorenz, S. Yotyodying,
B. Eickelmann, and M. Endberg, Eds. Münster: Waxmann Verlag, 2022, pp. 187–210.'
mla: Eickelmann, Birgit, et al. “Digitalisierungsbezogene Fortbildung und professionelle
Lerngelegenheiten von Lehrpersonen der Sekundarstufe I in Deutschland und im Bundesländervergleich.”
Schule digital – der Länderindikator 2021. Lehren und Lernen mit digitalen
Medien in der Sekundarstufe I in Deutschland im Bundesländervergleich und im Trend
seit 2017 , edited by R. Lorenz et al., Waxmann Verlag, 2022, pp. 187–210.
short: 'B. Eickelmann, R. Lorenz, M. Endberg, M. Domke, in: R. Lorenz, S. Yotyodying,
B. Eickelmann, M. Endberg (Eds.), Schule digital – der Länderindikator 2021. Lehren
und Lernen mit digitalen Medien in der Sekundarstufe I in Deutschland im Bundesländervergleich
und im Trend seit 2017 , Waxmann Verlag, Münster, 2022, pp. 187–210.'
date_created: 2023-05-09T07:44:04Z
date_updated: 2024-03-20T08:13:40Z
department:
- _id: '462'
editor:
- first_name: 'R. '
full_name: 'Lorenz, R. '
last_name: Lorenz
- first_name: S.
full_name: Yotyodying, S.
last_name: Yotyodying
- first_name: Birgit
full_name: Eickelmann, Birgit
last_name: Eickelmann
- first_name: M.
full_name: Endberg, M.
last_name: Endberg
language:
- iso: ger
page: 187-210
place: Münster
publication: 'Schule digital – der Länderindikator 2021. Lehren und Lernen mit digitalen
Medien in der Sekundarstufe I in Deutschland im Bundesländervergleich und im Trend
seit 2017 '
publisher: Waxmann Verlag
status: public
title: Digitalisierungsbezogene Fortbildung und professionelle Lerngelegenheiten von
Lehrpersonen der Sekundarstufe I in Deutschland und im Bundesländervergleich
type: book_chapter
user_id: '103823'
year: '2022'
...
---
_id: '44632'
author:
- first_name: Birgit
full_name: Eickelmann, Birgit
id: '40387'
last_name: Eickelmann
- first_name: Gianna
full_name: Casamassima, Gianna
id: '41118'
last_name: Casamassima
- first_name: Amelie
full_name: Labusch, Amelie
id: '65599'
last_name: Labusch
- first_name: Kerstin
full_name: Drossel, Kerstin
id: '48921'
last_name: Drossel
- first_name: M.
full_name: Sisask, M.
last_name: Sisask
- first_name: G.
full_name: Teidla-Kunitson, G.
last_name: Teidla-Kunitson
- first_name: A.
full_name: Kazani, A.
last_name: Kazani
- first_name: D.
full_name: Parsanoglou, D.
last_name: Parsanoglou
- first_name: M.
full_name: Symeonaki, M.
last_name: Symeonaki
- first_name: G. B.
full_name: Gudmundsdottir, G. B.
last_name: Gudmundsdottir
- first_name: H. B.
full_name: Holmarsdottir, H. B.
last_name: Holmarsdottir
- first_name: L.
full_name: Mifsud, L.
last_name: Mifsud
- first_name: M.
full_name: Barbovschi, M.
last_name: Barbovschi
citation:
ama: 'Eickelmann B, Casamassima G, Labusch A, et al. Children and Young People’s
Narratives and Perceptions of ICT in Education in Selected European Countries
Complemented by Perspectives of Teachers and Further Relevant Stakeholders in
the Educational Context. (DigiGen- Working Paper Series No.11).; 2022. doi:doi: 10.5281/zenodo.7152391'
apa: 'Eickelmann, B., Casamassima, G., Labusch, A., Drossel, K., Sisask, M., Teidla-Kunitson,
G., Kazani, A., Parsanoglou, D., Symeonaki, M., Gudmundsdottir, G. B., Holmarsdottir,
H. B., Mifsud, L., & Barbovschi, M. (2022). Children and young people’s
narratives and perceptions of ICT in education in selected European countries
complemented by perspectives of teachers and further relevant stakeholders in
the educational context. (DigiGen- working paper series No.11). https://doi.org/doi: 10.5281/zenodo.7152391'
bibtex: '@book{Eickelmann_Casamassima_Labusch_Drossel_Sisask_Teidla-Kunitson_Kazani_Parsanoglou_Symeonaki_Gudmundsdottir_et
al._2022, title={Children and young people’s narratives and perceptions of ICT
in education in selected European countries complemented by perspectives of teachers
and further relevant stakeholders in the educational context. (DigiGen- working
paper series No.11)}, DOI={doi:
10.5281/zenodo.7152391}, author={Eickelmann, Birgit and Casamassima, Gianna
and Labusch, Amelie and Drossel, Kerstin and Sisask, M. and Teidla-Kunitson, G.
and Kazani, A. and Parsanoglou, D. and Symeonaki, M. and Gudmundsdottir, G. B.
and et al.}, year={2022} }'
chicago: 'Eickelmann, Birgit, Gianna Casamassima, Amelie Labusch, Kerstin Drossel,
M. Sisask, G. Teidla-Kunitson, A. Kazani, et al. Children and Young People’s
Narratives and Perceptions of ICT in Education in Selected European Countries
Complemented by Perspectives of Teachers and Further Relevant Stakeholders in
the Educational Context. (DigiGen- Working Paper Series No.11), 2022. https://doi.org/doi: 10.5281/zenodo.7152391.'
ieee: B. Eickelmann et al., Children and young people’s narratives and
perceptions of ICT in education in selected European countries complemented by
perspectives of teachers and further relevant stakeholders in the educational
context. (DigiGen- working paper series No.11). 2022.
mla: 'Eickelmann, Birgit, et al. Children and Young People’s Narratives and Perceptions
of ICT in Education in Selected European Countries Complemented by Perspectives
of Teachers and Further Relevant Stakeholders in the Educational Context. (DigiGen-
Working Paper Series No.11). 2022, doi:doi:
10.5281/zenodo.7152391.'
short: B. Eickelmann, G. Casamassima, A. Labusch, K. Drossel, M. Sisask, G. Teidla-Kunitson,
A. Kazani, D. Parsanoglou, M. Symeonaki, G.B. Gudmundsdottir, H.B. Holmarsdottir,
L. Mifsud, M. Barbovschi, Children and Young People’s Narratives and Perceptions
of ICT in Education in Selected European Countries Complemented by Perspectives
of Teachers and Further Relevant Stakeholders in the Educational Context. (DigiGen-
Working Paper Series No.11), 2022.
date_created: 2023-05-08T11:30:03Z
date_updated: 2024-03-20T10:27:55Z
department:
- _id: '462'
doi: 'doi: 10.5281/zenodo.7152391'
language:
- iso: eng
status: public
title: Children and young people’s narratives and perceptions of ICT in education
in selected European countries complemented by perspectives of teachers and further
relevant stakeholders in the educational context. (DigiGen- working paper series
No.11)
type: report
user_id: '103823'
year: '2022'
...
---
_id: '44633'
author:
- first_name: I.
full_name: Seland, I.
last_name: Seland
- first_name: R.
full_name: Aldrich, R.
last_name: Aldrich
- first_name: S.
full_name: Ayllón, S.
last_name: Ayllón
- first_name: M.
full_name: Barbovschi, M.
last_name: Barbovschi
- first_name: A.
full_name: Bărbuță, A.
last_name: Bărbuță
- first_name: P.
full_name: Brugarolas, P.
last_name: Brugarolas
- first_name: Gianna
full_name: Casamassima, Gianna
id: '41118'
last_name: Casamassima
- first_name: Kerstin
full_name: Drossel, Kerstin
id: '48921'
last_name: Drossel
- first_name: Birgit
full_name: Eickelmann, Birgit
id: '40387'
last_name: Eickelmann
- first_name: E.
full_name: Gosme, E.
last_name: Gosme
- first_name: G. B.
full_name: Gudmundsdottir, G. B.
last_name: Gudmundsdottir
- first_name: H. B.
full_name: Holmarsdottir, H. B.
last_name: Holmarsdottir
- first_name: C.
full_name: Hyggen, C.
last_name: Hyggen
- first_name: S.
full_name: Lado, S.
last_name: Lado
- first_name: T.
full_name: Tove, T.
last_name: Tove
- first_name: O.
full_name: Kapella, O.
last_name: Kapella
- first_name: A.
full_name: Karatzogianni, A.
last_name: Karatzogianni
- first_name: A.
full_name: Kazani, A.
last_name: Kazani
- first_name: Amelie
full_name: Labusch, Amelie
id: '65599'
last_name: Labusch
- first_name: L.
full_name: Mifsud, L.
last_name: Mifsud
- first_name: S.
full_name: Olabode, S.
last_name: Olabode
- first_name: D.
full_name: Parsanoglou, D.
last_name: Parsanoglou
- first_name: M.
full_name: Roth, M.
last_name: Roth
- first_name: E.-M.
full_name: Schmidt, E.-M.
last_name: Schmidt
- first_name: H.
full_name: Shorey, H.
last_name: Shorey
- first_name: M.
full_name: Sisask, M.
last_name: Sisask
- first_name: M.
full_name: Symeonaki, M.
last_name: Symeonaki
- first_name: G.
full_name: Teidla-Kunitsõn, G.
last_name: Teidla-Kunitsõn
- first_name: L.
full_name: Zinoveva, L.
last_name: Zinoveva
citation:
ama: Seland I, Aldrich R, Ayllón S, et al. Understanding Children and Young People
as Digital Citizens. (DigiGen- Working Paper Series No.12).; 2022.
apa: Seland, I., Aldrich, R., Ayllón, S., Barbovschi, M., Bărbuță, A., Brugarolas,
P., Casamassima, G., Drossel, K., Eickelmann, B., Gosme, E., Gudmundsdottir, G.
B., Holmarsdottir, H. B., Hyggen, C., Lado, S., Tove, T., Kapella, O., Karatzogianni,
A., Kazani, A., Labusch, A., … Zinoveva, L. (2022). Understanding children
and young people as digital citizens. (DigiGen- working paper series No.12).
bibtex: '@book{Seland_Aldrich_Ayllón_Barbovschi_Bărbuță_Brugarolas_Casamassima_Drossel_Eickelmann_Gosme_et
al._2022, title={Understanding children and young people as digital citizens.
(DigiGen- working paper series No.12)}, author={Seland, I. and Aldrich, R. and
Ayllón, S. and Barbovschi, M. and Bărbuță, A. and Brugarolas, P. and Casamassima,
Gianna and Drossel, Kerstin and Eickelmann, Birgit and Gosme, E. and et al.},
year={2022} }'
chicago: Seland, I., R. Aldrich, S. Ayllón, M. Barbovschi, A. Bărbuță, P. Brugarolas,
Gianna Casamassima, et al. Understanding Children and Young People as Digital
Citizens. (DigiGen- Working Paper Series No.12), 2022.
ieee: I. Seland et al., Understanding children and young people as digital
citizens. (DigiGen- working paper series No.12). 2022.
mla: Seland, I., et al. Understanding Children and Young People as Digital Citizens.
(DigiGen- Working Paper Series No.12). 2022.
short: I. Seland, R. Aldrich, S. Ayllón, M. Barbovschi, A. Bărbuță, P. Brugarolas,
G. Casamassima, K. Drossel, B. Eickelmann, E. Gosme, G.B. Gudmundsdottir, H.B.
Holmarsdottir, C. Hyggen, S. Lado, T. Tove, O. Kapella, A. Karatzogianni, A. Kazani,
A. Labusch, L. Mifsud, S. Olabode, D. Parsanoglou, M. Roth, E.-M. Schmidt, H.
Shorey, M. Sisask, M. Symeonaki, G. Teidla-Kunitsõn, L. Zinoveva, Understanding
Children and Young People as Digital Citizens. (DigiGen- Working Paper Series
No.12), 2022.
date_created: 2023-05-08T11:56:34Z
date_updated: 2024-03-20T10:27:44Z
department:
- _id: '462'
language:
- iso: eng
main_file_link:
- url: https://www.digigen.eu/wp-content/uploads/2022/12/DigiGen_7._1_WorkingPaper_Final.pdf
status: public
title: Understanding children and young people as digital citizens. (DigiGen- working
paper series No.12)
type: report
user_id: '103823'
year: '2022'
...
---
_id: '44659'
author:
- first_name: Gianna
full_name: Casamassima, Gianna
id: '41118'
last_name: Casamassima
- first_name: Birgit
full_name: Eickelmann, Birgit
id: '40387'
last_name: Eickelmann
- first_name: Amelie
full_name: Labusch, Amelie
id: '65599'
last_name: Labusch
- first_name: Kerstin
full_name: Drossel, Kerstin
id: '48921'
last_name: Drossel
- first_name: M.
full_name: Barbovschi, M.
last_name: Barbovschi
- first_name: G. B.
full_name: Gudmundsdottir, G. B.
last_name: Gudmundsdottir
- first_name: H. B.
full_name: Holmarsdottir, H. B.
last_name: Holmarsdottir
- first_name: A.
full_name: Kazani, A.
last_name: Kazani
- first_name: L.
full_name: Mifsud, L.
last_name: Mifsud
- first_name: D.
full_name: Parsanoglou, D.
last_name: Parsanoglou
- first_name: M.
full_name: Sisask, M.
last_name: Sisask
- first_name: M.
full_name: Symeonaki, M.
last_name: Symeonaki
- first_name: G.
full_name: Teidla-Kunitsõn, G.
last_name: Teidla-Kunitsõn
citation:
ama: 'Casamassima G, Eickelmann B, Labusch A, et al. Beyond Participation: Video
Workshops across Europe to Engage in Research with Children and Young People and
Teacher Candidates as Collaborators Investigating ICT in Education (DigiGen- Working
Paper Series No.10).; 2022. doi:doi:
10.5281/zenodo.6973455'
apa: 'Casamassima, G., Eickelmann, B., Labusch, A., Drossel, K., Barbovschi, M.,
Gudmundsdottir, G. B., Holmarsdottir, H. B., Kazani, A., Mifsud, L., Parsanoglou,
D., Sisask, M., Symeonaki, M., & Teidla-Kunitsõn, G. (2022). Beyond participation:
Video workshops across Europe to engage in research with children and young people
and teacher candidates as collaborators investigating ICT in education (DigiGen-
working paper series No.10). https://doi.org/doi:
10.5281/zenodo.6973455'
bibtex: '@book{Casamassima_Eickelmann_Labusch_Drossel_Barbovschi_Gudmundsdottir_Holmarsdottir_Kazani_Mifsud_Parsanoglou_et
al._2022, title={Beyond participation: Video workshops across Europe to engage
in research with children and young people and teacher candidates as collaborators
investigating ICT in education (DigiGen- working paper series No.10)}, DOI={doi: 10.5281/zenodo.6973455},
author={Casamassima, Gianna and Eickelmann, Birgit and Labusch, Amelie and Drossel,
Kerstin and Barbovschi, M. and Gudmundsdottir, G. B. and Holmarsdottir, H. B.
and Kazani, A. and Mifsud, L. and Parsanoglou, D. and et al.}, year={2022} }'
chicago: 'Casamassima, Gianna, Birgit Eickelmann, Amelie Labusch, Kerstin Drossel,
M. Barbovschi, G. B. Gudmundsdottir, H. B. Holmarsdottir, et al. Beyond Participation:
Video Workshops across Europe to Engage in Research with Children and Young People
and Teacher Candidates as Collaborators Investigating ICT in Education (DigiGen-
Working Paper Series No.10), 2022. https://doi.org/doi:
10.5281/zenodo.6973455.'
ieee: 'G. Casamassima et al., Beyond participation: Video workshops across
Europe to engage in research with children and young people and teacher candidates
as collaborators investigating ICT in education (DigiGen- working paper series
No.10). 2022.'
mla: 'Casamassima, Gianna, et al. Beyond Participation: Video Workshops across
Europe to Engage in Research with Children and Young People and Teacher Candidates
as Collaborators Investigating ICT in Education (DigiGen- Working Paper Series
No.10). 2022, doi:doi:
10.5281/zenodo.6973455.'
short: 'G. Casamassima, B. Eickelmann, A. Labusch, K. Drossel, M. Barbovschi, G.B.
Gudmundsdottir, H.B. Holmarsdottir, A. Kazani, L. Mifsud, D. Parsanoglou, M. Sisask,
M. Symeonaki, G. Teidla-Kunitsõn, Beyond Participation: Video Workshops across
Europe to Engage in Research with Children and Young People and Teacher Candidates
as Collaborators Investigating ICT in Education (DigiGen- Working Paper Series
No.10), 2022.'
date_created: 2023-05-09T07:33:03Z
date_updated: 2024-03-20T10:27:20Z
department:
- _id: '462'
doi: 'doi: 10.5281/zenodo.6973455'
language:
- iso: eng
status: public
title: 'Beyond participation: Video workshops across Europe to engage in research
with children and young people and teacher candidates as collaborators investigating
ICT in education (DigiGen- working paper series No.10)'
type: report
user_id: '103823'
year: '2022'
...
---
_id: '34215'
abstract:
- lang: eng
text: 'Clinching as a mechanical joining technique allows a fast and reliable joining
of metal sheets in large-scale production. An efficient design and dimensioning
of clinched joints requires a holistic understanding of the material, the joining
process and the resulting properties of the joint. In this paper, the process
chain for clinching metal sheets is described and experimental techniques are
proposed to analyze the process-microstructure-property relationships from the
sheet metal to the joined structure. At the example of clinching aluminum EN AW
6014, characterization methods are applied and discussed for the following characteristics:
the mechanical properties of the sheet materials, the tribological behavior in
the joining system, the joining process and the resulting material structure,
the load-bearing behavior of the joint, the damage and degradation as well as
the service life and crack growth behavior. The compilation of the characterization
methods gives an overview on the advantages and weaknesses of the methods and
the multiple interactions of material, process and properties during clinching.
In addition, the results of the analyses on EN AW 6014 can be applied for parameterization
and validation of simulations.'
article_number: '100108'
author:
- first_name: Robert
full_name: Kupfer, Robert
last_name: Kupfer
- first_name: Daniel
full_name: Köhler, Daniel
last_name: Köhler
- first_name: David
full_name: Römisch, David
last_name: Römisch
- first_name: Simon
full_name: Wituschek, Simon
last_name: Wituschek
- first_name: Lars
full_name: Ewenz, Lars
last_name: Ewenz
- first_name: Jan
full_name: Kalich, Jan
last_name: Kalich
- first_name: Deborah
full_name: Weiß, Deborah
id: '45673'
last_name: Weiß
- first_name: Behdad
full_name: Sadeghian, Behdad
last_name: Sadeghian
- first_name: Matthias
full_name: Busch, Matthias
last_name: Busch
- first_name: Jan Tobias
full_name: Krüger, Jan Tobias
id: '44307'
last_name: Krüger
orcid: 0000-0002-0827-9654
- first_name: Moritz
full_name: Neuser, Moritz
id: '32340'
last_name: Neuser
- first_name: Olexandr
full_name: Grydin, Olexandr
id: '43822'
last_name: Grydin
- first_name: Max
full_name: Böhnke, Max
id: '45779'
last_name: Böhnke
- first_name: Christian Roman
full_name: Bielak, Christian Roman
id: '34782'
last_name: Bielak
- first_name: Juliane
full_name: Troschitz, Juliane
last_name: Troschitz
citation:
ama: Kupfer R, Köhler D, Römisch D, et al. Clinching of Aluminum Materials – Methods
for the Continuous Characterization of Process, Microstructure and Properties.
Journal of Advanced Joining Processes. 2022;5. doi:10.1016/j.jajp.2022.100108
apa: Kupfer, R., Köhler, D., Römisch, D., Wituschek, S., Ewenz, L., Kalich, J.,
Weiß, D., Sadeghian, B., Busch, M., Krüger, J. T., Neuser, M., Grydin, O., Böhnke,
M., Bielak, C. R., & Troschitz, J. (2022). Clinching of Aluminum Materials
– Methods for the Continuous Characterization of Process, Microstructure and Properties.
Journal of Advanced Joining Processes, 5, Article 100108. https://doi.org/10.1016/j.jajp.2022.100108
bibtex: '@article{Kupfer_Köhler_Römisch_Wituschek_Ewenz_Kalich_Weiß_Sadeghian_Busch_Krüger_et
al._2022, title={Clinching of Aluminum Materials – Methods for the Continuous
Characterization of Process, Microstructure and Properties}, volume={5}, DOI={10.1016/j.jajp.2022.100108},
number={100108}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier
BV}, author={Kupfer, Robert and Köhler, Daniel and Römisch, David and Wituschek,
Simon and Ewenz, Lars and Kalich, Jan and Weiß, Deborah and Sadeghian, Behdad
and Busch, Matthias and Krüger, Jan Tobias and et al.}, year={2022} }'
chicago: Kupfer, Robert, Daniel Köhler, David Römisch, Simon Wituschek, Lars Ewenz,
Jan Kalich, Deborah Weiß, et al. “Clinching of Aluminum Materials – Methods for
the Continuous Characterization of Process, Microstructure and Properties.” Journal
of Advanced Joining Processes 5 (2022). https://doi.org/10.1016/j.jajp.2022.100108.
ieee: 'R. Kupfer et al., “Clinching of Aluminum Materials – Methods for the
Continuous Characterization of Process, Microstructure and Properties,” Journal
of Advanced Joining Processes, vol. 5, Art. no. 100108, 2022, doi: 10.1016/j.jajp.2022.100108.'
mla: Kupfer, Robert, et al. “Clinching of Aluminum Materials – Methods for the Continuous
Characterization of Process, Microstructure and Properties.” Journal of Advanced
Joining Processes, vol. 5, 100108, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100108.
short: R. Kupfer, D. Köhler, D. Römisch, S. Wituschek, L. Ewenz, J. Kalich, D. Weiß,
B. Sadeghian, M. Busch, J.T. Krüger, M. Neuser, O. Grydin, M. Böhnke, C.R. Bielak,
J. Troschitz, Journal of Advanced Joining Processes 5 (2022).
date_created: 2022-12-05T21:17:22Z
date_updated: 2024-03-20T11:54:33Z
department:
- _id: '630'
- _id: '158'
doi: 10.1016/j.jajp.2022.100108
intvolume: ' 5'
keyword:
- Mechanical Engineering
- Mechanics of Materials
- Engineering (miscellaneous)
- Chemical Engineering (miscellaneous)
language:
- iso: eng
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '133'
name: 'TRR 285 - C: TRR 285 - Project Area C'
- _id: '148'
name: 'TRR 285 – C04: TRR 285 - Subproject C04'
- _id: '146'
name: 'TRR 285 – C02: TRR 285 - Subproject C02'
- _id: '145'
name: 'TRR 285 – C01: TRR 285 - Subproject C01'
- _id: '132'
name: 'TRR 285 - B: TRR 285 - Project Area B'
- _id: '141'
name: 'TRR 285 – B02: TRR 285 - Subproject B02'
- _id: '138'
name: 'TRR 285 – A04: TRR 285 - Subproject A04'
- _id: '135'
name: 'TRR 285 – A01: TRR 285 - Subproject A01'
- _id: '136'
name: 'TRR 285 – A02: TRR 285 - Subproject A02'
- _id: '149'
name: 'TRR 285 – C05: TRR 285 - Subproject C05'
- _id: '143'
name: 'TRR 285 – B04: TRR 285 - Subproject B04'
publication: Journal of Advanced Joining Processes
publication_identifier:
issn:
- 2666-3309
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Clinching of Aluminum Materials – Methods for the Continuous Characterization
of Process, Microstructure and Properties
type: journal_article
user_id: '34782'
volume: 5
year: '2022'
...
---
_id: '52687'
author:
- first_name: Philipp
full_name: Bähr, Philipp
last_name: Bähr
- first_name: Marius
full_name: Striewe, Marius
id: '30228'
last_name: Striewe
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Silke
full_name: Sommer, Silke
last_name: Sommer
citation:
ama: 'Bähr P, Striewe M, Meschut G, Sommer S. Ersatzmodellentwicklung zur Berücksichtigung
der lokalen Fügeelementkinematik in mechanisch gefügten Verbindungen für die Bauteilauslegung
im stahlintensiven Karosseriebau. In: 12. Kolloquium: Gemeinsame Forschung
in der Mechanischen Fügetechnik. ; 2022.'
apa: 'Bähr, P., Striewe, M., Meschut, G., & Sommer, S. (2022). Ersatzmodellentwicklung
zur Berücksichtigung der lokalen Fügeelementkinematik in mechanisch gefügten Verbindungen
für die Bauteilauslegung im stahlintensiven Karosseriebau. 12. Kolloquium:
Gemeinsame Forschung in der Mechanischen Fügetechnik. 12. Kolloquium: Gemeinsame
Forschung in der Mechanischen Fügetechnik.'
bibtex: '@inproceedings{Bähr_Striewe_Meschut_Sommer_2022, title={Ersatzmodellentwicklung
zur Berücksichtigung der lokalen Fügeelementkinematik in mechanisch gefügten Verbindungen
für die Bauteilauslegung im stahlintensiven Karosseriebau}, booktitle={12. Kolloquium:
Gemeinsame Forschung in der Mechanischen Fügetechnik}, author={Bähr, Philipp and
Striewe, Marius and Meschut, Gerson and Sommer, Silke}, year={2022} }'
chicago: 'Bähr, Philipp, Marius Striewe, Gerson Meschut, and Silke Sommer. “Ersatzmodellentwicklung
zur Berücksichtigung der lokalen Fügeelementkinematik in mechanisch gefügten Verbindungen
für die Bauteilauslegung im stahlintensiven Karosseriebau.” In 12. Kolloquium:
Gemeinsame Forschung in der Mechanischen Fügetechnik, 2022.'
ieee: 'P. Bähr, M. Striewe, G. Meschut, and S. Sommer, “Ersatzmodellentwicklung
zur Berücksichtigung der lokalen Fügeelementkinematik in mechanisch gefügten Verbindungen
für die Bauteilauslegung im stahlintensiven Karosseriebau,” presented at the 12.
Kolloquium: Gemeinsame Forschung in der Mechanischen Fügetechnik, 2022.'
mla: 'Bähr, Philipp, et al. “Ersatzmodellentwicklung zur Berücksichtigung der lokalen
Fügeelementkinematik in mechanisch gefügten Verbindungen für die Bauteilauslegung
im stahlintensiven Karosseriebau.” 12. Kolloquium: Gemeinsame Forschung in
der Mechanischen Fügetechnik, 2022.'
short: 'P. Bähr, M. Striewe, G. Meschut, S. Sommer, in: 12. Kolloquium: Gemeinsame
Forschung in der Mechanischen Fügetechnik, 2022.'
conference:
end_date: 2022-11-24
name: '12. Kolloquium: Gemeinsame Forschung in der Mechanischen Fügetechnik'
start_date: 2022-11-23
date_created: 2024-03-20T13:42:12Z
date_updated: 2024-03-20T13:45:03Z
department:
- _id: '157'
language:
- iso: ger
publication: '12. Kolloquium: Gemeinsame Forschung in der Mechanischen Fügetechnik'
status: public
title: Ersatzmodellentwicklung zur Berücksichtigung der lokalen Fügeelementkinematik
in mechanisch gefügten Verbindungen für die Bauteilauslegung im stahlintensiven
Karosseriebau
type: conference_abstract
user_id: '30228'
year: '2022'
...
---
_id: '33864'
abstract:
- lang: ger
text: Im Zentrum Beitrags steht die Frage nach dem Spezifischen einer Didaktik im
Wissenschafts- bzw. Hochschulkontext. Dabei hat die Organisation des Wissenschaftssystems
in Disziplinen bzw. disziplinäre Gemeinschaften eine besondere Bedeutung. Disziplinen
entwickeln spezifische Praktiken, die das Handeln ihrer Angehörigen prägen und
sich in Fachkulturen zeigen. Diese Praktiken werden insbesondere an kommunikativen
Artefakten sichtbar. Für Personen außerhalb einer disziplinären Gemeinschaft und
ganz besonders für jene, die keinen direkten Bezug zum Wissenschaftssystem haben,
sind disziplinäre Praktiken häufig schwer zu erschließen. Unsere Konzeption von
Wissenschaftsdidaktik lenkt den Blick auf die impliziten Praktiken wissenschaftlicher
Disziplinen. Aufgabe von Wissenschaftsdidaktik ist es dem- nach, erstens die impliziten
disziplinären Sinnstrukturen, die hinter bestimmten Prak- tiken stehen und in
kommunikativen Handlungen und Artefakten verschlüsselt sind, zu entschlüsseln.
Zweitens ist es notwendig, die Wahrnehmung disziplinärer Praktiken durch die Studierenden
zu analysieren und Differenzen zum Sinnverstehen von Wissenschaftler:innen zu
identifizieren. Ausgehend davon kann dann drittens auf eine Verständigung über
die Praktiken und deren Sinngehalt hingearbeitet werden. Der Beitrag formuliert
die Grundzüge einer Wissenschaftsdidaktik, welche Verständigung über die Praktiken
wissenschaftlicher Disziplinen zu einem Kernbestandteil akademischer Lehre macht.
Dazu gehört auch ein Moment von Wissenschaftskritik, das auf die Disziplinen und
deren Praktiken selbst zurückwirkt. Wissenschaftsdidaktik in diesem Sinne verlangt,
den Blick Dritter auf die Praktiken der eigenen Disziplin einzunehmen. Dazu gehör
auch, sich einzugestehen, wenn Praktiken keinen Sinn für wissenschaftliche Erkenntnisprozesse
(mehr) aufweisen bzw. diesen verloren haben.
author:
- first_name: Tobias
full_name: Jenert, Tobias
id: '71994'
last_name: Jenert
orcid: ' https://orcid.org/0000-0001-9262-5646'
- first_name: Ingrid
full_name: Scharlau, Ingrid
id: '451'
last_name: Scharlau
orcid: 0000-0003-2364-9489
citation:
ama: 'Jenert T, Scharlau I. Wissenschaftsdidaktik als Verständigung über wissenschaftliches
Handeln – eine Auslegeordnung. In: Reinmann G, Rhein R, eds. Wissenschaftsdidaktik
I: Einführung. transcript; 2022:155-179. doi:10.14361/9783839460979-008'
apa: 'Jenert, T., & Scharlau, I. (2022). Wissenschaftsdidaktik als Verständigung
über wissenschaftliches Handeln – eine Auslegeordnung. In G. Reinmann & R.
Rhein (Eds.), Wissenschaftsdidaktik I: Einführung (pp. 155–179). transcript.
https://doi.org/10.14361/9783839460979-008'
bibtex: '@inbook{Jenert_Scharlau_2022, place={Bielefeld}, title={Wissenschaftsdidaktik
als Verständigung über wissenschaftliches Handeln – eine Auslegeordnung}, DOI={10.14361/9783839460979-008},
booktitle={Wissenschaftsdidaktik I: Einführung}, publisher={transcript}, author={Jenert,
Tobias and Scharlau, Ingrid}, editor={Reinmann, Gabi and Rhein, Rüdiger}, year={2022},
pages={155–179} }'
chicago: 'Jenert, Tobias, and Ingrid Scharlau. “Wissenschaftsdidaktik als Verständigung
über wissenschaftliches Handeln – eine Auslegeordnung.” In Wissenschaftsdidaktik
I: Einführung, edited by Gabi Reinmann and Rüdiger Rhein, 155–79. Bielefeld:
transcript, 2022. https://doi.org/10.14361/9783839460979-008.'
ieee: 'T. Jenert and I. Scharlau, “Wissenschaftsdidaktik als Verständigung über
wissenschaftliches Handeln – eine Auslegeordnung,” in Wissenschaftsdidaktik
I: Einführung, G. Reinmann and R. Rhein, Eds. Bielefeld: transcript, 2022,
pp. 155–179.'
mla: 'Jenert, Tobias, and Ingrid Scharlau. “Wissenschaftsdidaktik als Verständigung
über wissenschaftliches Handeln – eine Auslegeordnung.” Wissenschaftsdidaktik
I: Einführung, edited by Gabi Reinmann and Rüdiger Rhein, transcript, 2022,
pp. 155–79, doi:10.14361/9783839460979-008.'
short: 'T. Jenert, I. Scharlau, in: G. Reinmann, R. Rhein (Eds.), Wissenschaftsdidaktik
I: Einführung, transcript, Bielefeld, 2022, pp. 155–179.'
date_created: 2022-10-24T06:48:14Z
date_updated: 2024-03-21T15:10:02Z
department:
- _id: '424'
- _id: '208'
doi: 10.14361/9783839460979-008
editor:
- first_name: Gabi
full_name: Reinmann, Gabi
last_name: Reinmann
- first_name: Rüdiger
full_name: Rhein, Rüdiger
last_name: Rhein
keyword:
- Wissenschaftsdidaktik
- Fachsozialisation
- Wissenschaftskritik
- Verständigung
- Fachkultur
- akademische Praktiken
- Unterrichtsfach Psychologie
language:
- iso: ger
main_file_link:
- open_access: '1'
url: https://www.transcript-open.de/doi/10.14361/9783839460979-008
oa: '1'
page: 155 - 179
place: Bielefeld
project:
- _id: '608'
name: 'DigiSelF: DigiSelF - Digitalisierung als Herausforderung und Innovation in
der Hochschullehre: Einsatz digitaler Hilfsmittel zur Förderung von Selbststeuerung'
publication: 'Wissenschaftsdidaktik I: Einführung'
publication_identifier:
unknown:
- 978-3-8394-6097-9
publication_status: published
publisher: transcript
quality_controlled: '1'
status: public
title: Wissenschaftsdidaktik als Verständigung über wissenschaftliches Handeln – eine
Auslegeordnung
type: book_chapter
user_id: '71994'
year: '2022'
...
---
_id: '46034'
abstract:
- lang: ger
text: "Die digitale Transformation führt dazu, dass sich lang etablierte Tätigkeiten
und Arbeitsabläufe, welche die Berufsbilder im Kern definieren, verändern und
stellt damit Mitarbeitende sowie Beteiligte der beruflichen Bildung vor Herausforderungen.
Berufliche Lehramtsstudiengänge sind gefordert, Studierenden bereits im hochschulischen
Teil ihrer Ausbildung den Aufbau eines berufsförmigen Wissens zu eröffnen, das
ihnen die Erkundung beruflicher Handlungsfelder ermöglicht und eine wichtige Grundlage
für die Unterrichtsgestaltung an Berufskollegs bildet. Wir geben in diesem Beitrag
Einblicke in die Entwicklungsarbeiten einer fachdidaktisch geprägten Einführungsveranstaltung
im Studienfach Wirtschaftswissenschaft für das Lehramt an Berufskollegs. Diese
zieht Ansätze der Fallstudiendidaktik heran, um für Studierende eine Möglichkeit
zu schaffen, die digitale Transformation von Arbeits- und Geschäftsprozessen zu
erkunden und diese mit Blick auf die Gestaltung von Wirtschaftsunterricht an Berufskollegs
zu analysieren. Dabei stellen wir die Entstehung der Fallstudie sowie deren Einbettung
in das Modulkonzept dar und diskutieren das hochschuldidaktische Lehr-/Lernformat.\r\n"
article_type: original
author:
- first_name: Tobias
full_name: Jenert, Tobias
id: '71994'
last_name: Jenert
orcid: ' https://orcid.org/0000-0001-9262-5646'
- first_name: H.-Hugo
full_name: Kremer, H.-Hugo
id: '15280'
last_name: Kremer
- first_name: Niklas
full_name: Sänger, Niklas
id: '49812'
last_name: Sänger
citation:
ama: Jenert T, Kremer H-H, Sänger N. Digitale Transformation der Berufs- und Arbeitswelt
– Einblicke in die fachdidaktische Gestaltung der beruflichen Fachrichtung ‚Wirtschaft
und Verwaltung‘. bwp@ Berufs- und Wirtschaftspädagogik. 2022;43.
apa: Jenert, T., Kremer, H.-H., & Sänger, N. (2022). Digitale Transformation
der Berufs- und Arbeitswelt – Einblicke in die fachdidaktische Gestaltung der
beruflichen Fachrichtung ‚Wirtschaft und Verwaltung‘. bwp@ Berufs- und Wirtschaftspädagogik,
43.
bibtex: '@article{Jenert_Kremer_Sänger_2022, title={Digitale Transformation der
Berufs- und Arbeitswelt – Einblicke in die fachdidaktische Gestaltung der beruflichen
Fachrichtung ‚Wirtschaft und Verwaltung‘}, volume={43}, journal={bwp@ Berufs-
und Wirtschaftspädagogik}, author={Jenert, Tobias and Kremer, H.-Hugo and Sänger,
Niklas}, year={2022} }'
chicago: Jenert, Tobias, H.-Hugo Kremer, and Niklas Sänger. “Digitale Transformation
der Berufs- und Arbeitswelt – Einblicke in die fachdidaktische Gestaltung der
beruflichen Fachrichtung ‚Wirtschaft und Verwaltung‘.” bwp@ Berufs- und Wirtschaftspädagogik
43 (2022).
ieee: T. Jenert, H.-H. Kremer, and N. Sänger, “Digitale Transformation der Berufs-
und Arbeitswelt – Einblicke in die fachdidaktische Gestaltung der beruflichen
Fachrichtung ‚Wirtschaft und Verwaltung‘,” bwp@ Berufs- und Wirtschaftspädagogik,
vol. 43, 2022.
mla: Jenert, Tobias, et al. “Digitale Transformation der Berufs- und Arbeitswelt
– Einblicke in die fachdidaktische Gestaltung der beruflichen Fachrichtung ‚Wirtschaft
und Verwaltung‘.” bwp@ Berufs- und Wirtschaftspädagogik, vol. 43, 2022.
short: T. Jenert, H.-H. Kremer, N. Sänger, bwp@ Berufs- und Wirtschaftspädagogik
43 (2022).
date_created: 2023-07-13T08:19:10Z
date_updated: 2024-03-21T15:10:50Z
department:
- _id: '208'
intvolume: ' 43'
language:
- iso: ger
main_file_link:
- url: https://www.bwpat.de/ausgabe43/jenert_etal_bwpat43.pdf
project:
- _id: '603'
name: 'DiPoLe: Digitale Prozessintegration in der beruflichen Lehrerbildung'
publication: bwp@ Berufs- und Wirtschaftspädagogik
publication_status: published
quality_controlled: '1'
status: public
title: Digitale Transformation der Berufs- und Arbeitswelt – Einblicke in die fachdidaktische
Gestaltung der beruflichen Fachrichtung ‚Wirtschaft und Verwaltung‘
type: journal_article
user_id: '71994'
volume: 43
year: '2022'
...