---
_id: '60002'
abstract:
- lang: eng
text: This study focuses on damage modeling across different mechanical joining
processes within a process chain, specifically using clinching and self-pierce
riveting (SPR). The aim is to apply a comprehensive model that captures the damage
mechanisms and interactions in these technologies, optimizing them for enhanced
performance and durability of aluminum joints. A GISSMO damage model was utilized,
based on the stress states occurring during the joining process and a newly introduced
damage testing method. This model was applied to both clinching and SPR processes.
A detailed analysis of the stress states provided insights into their effect on
the material. By incorporating these insights into the GISSMO model, improved
accuracy in damage prediction was achieved. The model's application to clinching
and SPR demonstrated its effectiveness in optimizing aluminum joint performance
and durability, ensuring that the processes can be finely tuned to minimize damage
and enhance joint quality.
author:
- first_name: Özcan
full_name: Harabati, Özcan
id: '54972'
last_name: Harabati
- first_name: Christian Roman
full_name: Bielak, Christian Roman
id: '34782'
last_name: Bielak
- first_name: Max
full_name: Böhnke, Max
id: '45779'
last_name: Böhnke
- first_name: Malte Christian
full_name: Schlichter, Malte Christian
id: '61977'
last_name: Schlichter
- first_name: Marc
full_name: Brockmeier, Marc
last_name: Brockmeier
- first_name: Mathias
full_name: Bobbert, Mathias
id: '7850'
last_name: Bobbert
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Harabati Ö, Bielak CR, Böhnke M, et al. Cross-process damage modeling: A process-chain
case study of clinching and self-pierced riveting for aluminum connections. In:
Materials Research Proceedings. Vol 52. Materials Research Forum LLC; 2025.
doi:10.21741/9781644903551-19'
apa: 'Harabati, Ö., Bielak, C. R., Böhnke, M., Schlichter, M. C., Brockmeier, M.,
Bobbert, M., & Meschut, G. (2025). Cross-process damage modeling: A process-chain
case study of clinching and self-pierced riveting for aluminum connections. Materials
Research Proceedings, 52. https://doi.org/10.21741/9781644903551-19'
bibtex: '@inproceedings{Harabati_Bielak_Böhnke_Schlichter_Brockmeier_Bobbert_Meschut_2025,
title={Cross-process damage modeling: A process-chain case study of clinching
and self-pierced riveting for aluminum connections}, volume={52}, DOI={10.21741/9781644903551-19},
booktitle={Materials Research Proceedings}, publisher={Materials Research Forum
LLC}, author={Harabati, Özcan and Bielak, Christian Roman and Böhnke, Max and
Schlichter, Malte Christian and Brockmeier, Marc and Bobbert, Mathias and Meschut,
Gerson}, year={2025} }'
chicago: 'Harabati, Özcan, Christian Roman Bielak, Max Böhnke, Malte Christian Schlichter,
Marc Brockmeier, Mathias Bobbert, and Gerson Meschut. “Cross-Process Damage Modeling:
A Process-Chain Case Study of Clinching and Self-Pierced Riveting for Aluminum
Connections.” In Materials Research Proceedings, Vol. 52. Materials Research
Forum LLC, 2025. https://doi.org/10.21741/9781644903551-19.'
ieee: 'Ö. Harabati et al., “Cross-process damage modeling: A process-chain
case study of clinching and self-pierced riveting for aluminum connections,” in
Materials Research Proceedings, 2025, vol. 52, doi: 10.21741/9781644903551-19.'
mla: 'Harabati, Özcan, et al. “Cross-Process Damage Modeling: A Process-Chain Case
Study of Clinching and Self-Pierced Riveting for Aluminum Connections.” Materials
Research Proceedings, vol. 52, Materials Research Forum LLC, 2025, doi:10.21741/9781644903551-19.'
short: 'Ö. Harabati, C.R. Bielak, M. Böhnke, M.C. Schlichter, M. Brockmeier, M.
Bobbert, G. Meschut, in: Materials Research Proceedings, Materials Research Forum
LLC, 2025.'
date_created: 2025-05-20T12:50:34Z
date_updated: 2026-02-24T13:59:43Z
doi: 10.21741/9781644903551-19
intvolume: ' 52'
language:
- iso: eng
project:
- _id: '131'
name: 'TRR 285 - A: TRR 285 - Project Area A'
- _id: '135'
name: 'TRR 285 – A01: TRR 285 - Subproject A01'
- _id: '130'
name: 'TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen
Prozessketten'
publication: Materials Research Proceedings
publication_identifier:
issn:
- 2474-395X
publication_status: published
publisher: Materials Research Forum LLC
quality_controlled: '1'
status: public
title: 'Cross-process damage modeling: A process-chain case study of clinching and
self-pierced riveting for aluminum connections'
type: conference
user_id: '7850'
volume: 52
year: '2025'
...
---
_id: '59584'
article_number: '100299'
author:
- first_name: Johannes
full_name: Friedlein, Johannes
last_name: Friedlein
- first_name: Stephan
full_name: Lüder, Stephan
last_name: Lüder
- first_name: Jan
full_name: Kalich, Jan
last_name: Kalich
- first_name: Hans Christian
full_name: Schmale, Hans Christian
last_name: Schmale
- first_name: Max
full_name: Böhnke, Max
id: '45779'
last_name: Böhnke
- first_name: Malte Christian
full_name: Schlichter, Malte Christian
id: '61977'
last_name: Schlichter
- first_name: Mathias
full_name: Bobbert, Mathias
id: '7850'
last_name: Bobbert
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Paul
full_name: Steinmann, Paul
last_name: Steinmann
- first_name: Julia
full_name: Mergheim, Julia
last_name: Mergheim
citation:
ama: Friedlein J, Lüder S, Kalich J, et al. Application of stress-state-dependent
ductile damage and failure model to clinch joining for a wide range of tool and
material combinations. Journal of Advanced Joining Processes. 2025;11.
doi:10.1016/j.jajp.2025.100299
apa: Friedlein, J., Lüder, S., Kalich, J., Schmale, H. C., Böhnke, M., Schlichter,
M. C., Bobbert, M., Meschut, G., Steinmann, P., & Mergheim, J. (2025). Application
of stress-state-dependent ductile damage and failure model to clinch joining for
a wide range of tool and material combinations. Journal of Advanced Joining
Processes, 11, Article 100299. https://doi.org/10.1016/j.jajp.2025.100299
bibtex: '@article{Friedlein_Lüder_Kalich_Schmale_Böhnke_Schlichter_Bobbert_Meschut_Steinmann_Mergheim_2025,
title={Application of stress-state-dependent ductile damage and failure model
to clinch joining for a wide range of tool and material combinations}, volume={11},
DOI={10.1016/j.jajp.2025.100299},
number={100299}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier
BV}, author={Friedlein, Johannes and Lüder, Stephan and Kalich, Jan and Schmale,
Hans Christian and Böhnke, Max and Schlichter, Malte Christian and Bobbert, Mathias
and Meschut, Gerson and Steinmann, Paul and Mergheim, Julia}, year={2025} }'
chicago: Friedlein, Johannes, Stephan Lüder, Jan Kalich, Hans Christian Schmale,
Max Böhnke, Malte Christian Schlichter, Mathias Bobbert, Gerson Meschut, Paul
Steinmann, and Julia Mergheim. “Application of Stress-State-Dependent Ductile
Damage and Failure Model to Clinch Joining for a Wide Range of Tool and Material
Combinations.” Journal of Advanced Joining Processes 11 (2025). https://doi.org/10.1016/j.jajp.2025.100299.
ieee: 'J. Friedlein et al., “Application of stress-state-dependent ductile
damage and failure model to clinch joining for a wide range of tool and material
combinations,” Journal of Advanced Joining Processes, vol. 11, Art. no.
100299, 2025, doi: 10.1016/j.jajp.2025.100299.'
mla: Friedlein, Johannes, et al. “Application of Stress-State-Dependent Ductile
Damage and Failure Model to Clinch Joining for a Wide Range of Tool and Material
Combinations.” Journal of Advanced Joining Processes, vol. 11, 100299,
Elsevier BV, 2025, doi:10.1016/j.jajp.2025.100299.
short: J. Friedlein, S. Lüder, J. Kalich, H.C. Schmale, M. Böhnke, M.C. Schlichter,
M. Bobbert, G. Meschut, P. Steinmann, J. Mergheim, Journal of Advanced Joining
Processes 11 (2025).
date_created: 2025-04-15T11:00:56Z
date_updated: 2026-02-24T14:00:55Z
doi: 10.1016/j.jajp.2025.100299
intvolume: ' 11'
language:
- iso: eng
project:
- _id: '131'
name: 'TRR 285 - A: TRR 285 - Project Area A'
- _id: '135'
name: 'TRR 285 – A01: TRR 285 - Subproject A01'
- _id: '138'
name: 'TRR 285 – A04: TRR 285 - Subproject A04'
- _id: '139'
name: 'TRR 285 – A05: TRR 285 - Subproject A05'
- _id: '130'
name: 'TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen
Prozessketten'
publication: Journal of Advanced Joining Processes
publication_identifier:
issn:
- 2666-3309
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Application of stress-state-dependent ductile damage and failure model to clinch
joining for a wide range of tool and material combinations
type: journal_article
user_id: '7850'
volume: 11
year: '2025'
...
---
_id: '64616'
abstract:
- lang: eng
text: The circular economy offers decisive advantages over the currently prevalent
linear economy in industry. Firstly, the reuse of products, individual parts and
material reduces the need for new production or generation and the associated
consumption of energy and resources. Secondly, it helps to avoid the generation
of waste. Early consideration of circular economic principles in product development
processes is essential to specifically promote reuse, reparability and recycling.
Efficient recycling of assemblies requires well-defined strategies. However, various
challenges hinder the efficiency of technical recycling processes in industrial
applications. This paper presents an Ishikawa (fishbone) diagram-based approach
to systematically identify and categorize these influences. The method is implemented
within an industrial framework, highlighting key obstacles such as material composition,
design constraints, use of technology, framework conditions, economic limitations
and regulatory challenges. By applying a scenario analysis, this approach examines
potential future developments and their impact on recycling-oriented design choices.
This helps to identify critical influencing factors and supports the development
of resilient and sustainable industrial practices. This framework will serve as
the foundation for developing an automated approach to circular design, enabling
industries to more effectively integrate sustainability into their processes and
adapt to changing environmental demands.
author:
- first_name: Katharina
full_name: Rohde, Katharina
id: '70143'
last_name: Rohde
orcid: 0009-0000-5738-7304
- first_name: Barbara Fernandez
full_name: Gonzalez, Barbara Fernandez
last_name: Gonzalez
- first_name: Finn Lukas
full_name: Budde, Finn Lukas
id: '74585'
last_name: Budde
- first_name: Manuel
full_name: Ott, Manuel
id: '44204'
last_name: Ott
- first_name: Iryna
full_name: Mozgova, Iryna
id: '95903'
last_name: Mozgova
- first_name: Alain Alonso
full_name: Mendibe, Alain Alonso
last_name: Mendibe
citation:
ama: 'Rohde K, Gonzalez BF, Budde FL, Ott M, Mozgova I, Mendibe AA. Unveiling Barriers
to Recycling with a Focus on Design: An Ishikawa Diagram-Based Approach with Industrial
Application. In: Kohl H, Seliger G, Dietrich F, Campana G, eds. Safe and Sustainable
Value Creation by Design - Proceedings of the 21st Global Conference on Sustainable
Manufacturing. Vol 1. Lecture Notes in Mechanical Engineering. Springer Nature
Switzerland AG.'
apa: 'Rohde, K., Gonzalez, B. F., Budde, F. L., Ott, M., Mozgova, I., & Mendibe,
A. A. (n.d.). Unveiling Barriers to Recycling with a Focus on Design: An Ishikawa
Diagram-Based Approach with Industrial Application. In H. Kohl, G. Seliger, F.
Dietrich, & G. Campana (Eds.), Safe and Sustainable Value Creation by Design
- Proceedings of the 21st Global Conference on Sustainable Manufacturing (Vol.
1). Springer Nature Switzerland AG.'
bibtex: '@inproceedings{Rohde_Gonzalez_Budde_Ott_Mozgova_Mendibe, series={Lecture
Notes in Mechanical Engineering}, title={Unveiling Barriers to Recycling with
a Focus on Design: An Ishikawa Diagram-Based Approach with Industrial Application},
volume={1}, booktitle={Safe and Sustainable Value Creation by Design - Proceedings
of the 21st Global Conference on Sustainable Manufacturing}, publisher={Springer
Nature Switzerland AG}, author={Rohde, Katharina and Gonzalez, Barbara Fernandez
and Budde, Finn Lukas and Ott, Manuel and Mozgova, Iryna and Mendibe, Alain Alonso},
editor={Kohl, Holger and Seliger, Günther and Dietrich, Franz and Campana, Giampaolo},
collection={Lecture Notes in Mechanical Engineering} }'
chicago: 'Rohde, Katharina, Barbara Fernandez Gonzalez, Finn Lukas Budde, Manuel
Ott, Iryna Mozgova, and Alain Alonso Mendibe. “Unveiling Barriers to Recycling
with a Focus on Design: An Ishikawa Diagram-Based Approach with Industrial Application.”
In Safe and Sustainable Value Creation by Design - Proceedings of the 21st
Global Conference on Sustainable Manufacturing, edited by Holger Kohl, Günther
Seliger, Franz Dietrich, and Giampaolo Campana, Vol. 1. Lecture Notes in Mechanical
Engineering. Springer Nature Switzerland AG, n.d.'
ieee: 'K. Rohde, B. F. Gonzalez, F. L. Budde, M. Ott, I. Mozgova, and A. A. Mendibe,
“Unveiling Barriers to Recycling with a Focus on Design: An Ishikawa Diagram-Based
Approach with Industrial Application,” in Safe and Sustainable Value Creation
by Design - Proceedings of the 21st Global Conference on Sustainable Manufacturing,
Bologna, Italy, vol. 1.'
mla: 'Rohde, Katharina, et al. “Unveiling Barriers to Recycling with a Focus on
Design: An Ishikawa Diagram-Based Approach with Industrial Application.” Safe
and Sustainable Value Creation by Design - Proceedings of the 21st Global Conference
on Sustainable Manufacturing, edited by Holger Kohl et al., vol. 1, Springer
Nature Switzerland AG.'
short: 'K. Rohde, B.F. Gonzalez, F.L. Budde, M. Ott, I. Mozgova, A.A. Mendibe, in:
H. Kohl, G. Seliger, F. Dietrich, G. Campana (Eds.), Safe and Sustainable Value
Creation by Design - Proceedings of the 21st Global Conference on Sustainable
Manufacturing, Springer Nature Switzerland AG, n.d.'
conference:
end_date: 2025-09-12
location: Bologna, Italy
name: 21st Global Conference on Sustainable Manufacturing (GCSM 2025)
start_date: 2025-09-10
date_created: 2026-02-24T13:36:06Z
date_updated: 2026-02-24T14:05:50Z
ddc:
- '620'
department:
- _id: '741'
editor:
- first_name: Holger
full_name: Kohl, Holger
last_name: Kohl
- first_name: Günther
full_name: Seliger, Günther
last_name: Seliger
- first_name: Franz
full_name: Dietrich, Franz
last_name: Dietrich
- first_name: Giampaolo
full_name: Campana, Giampaolo
last_name: Campana
file:
- access_level: closed
content_type: application/pdf
creator: kathiroh
date_created: 2026-02-24T13:33:47Z
date_updated: 2026-02-24T13:33:47Z
file_id: '64617'
file_name: GCSM_2025_Rohde_updated.pdf
file_size: 333257
relation: main_file
success: 1
file_date_updated: 2026-02-24T13:33:47Z
has_accepted_license: '1'
intvolume: ' 1'
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
publication: Safe and Sustainable Value Creation by Design - Proceedings of the 21st
Global Conference on Sustainable Manufacturing
publication_status: inpress
publisher: Springer Nature Switzerland AG
quality_controlled: '1'
series_title: Lecture Notes in Mechanical Engineering
status: public
title: 'Unveiling Barriers to Recycling with a Focus on Design: An Ishikawa Diagram-Based
Approach with Industrial Application'
type: conference
user_id: '70143'
volume: 1
year: '2025'
...
---
_id: '60440'
abstract:
- lang: eng
text: The versatile self-pierce riveting (V-SPR) is a further development of semi-tubular
self-pierce riveting. V-SPR enables adaptation to changing boundary conditions,
such as a change in the material thickness combination, without varying the rivet
die combination due to increased punch actuation and the use of multi-range capable
rivets [1]. The inner punch first sets the rivet. The outer punch then forms the
rivet head to the respective sheet thickness. For this, the rivet requires a hard
shank and a ductile rivet head, which is achieved by an inductive local hardening
process [2]. Until now, the joint formation of rivets with graded hardness profile
has been challenging to estimate in the FEM simulation due to the inhomogeneous
material conditions in the rivet. In this study, a method capable of reproducing
the experimentally determined hardness levels of rivets in detail is shown. This
FE model enables the realistic modelling of the mechanical properties of the rivet
on the basis of the hardness profile in order to predict the correct deformation
processes and stresses during the riveting process. First, the detailed experimental
hardness mapping of the locally heat-treated rivets is transferred into the FE
model. The FEM material model can predict the local strength of the rivet based
on hardness by scaling the flow curves. To estimate the predictive capability
of the FEM model, the joint formation of rivets with different graded hardness
profiles is compared experimentally and simulative. Based on the validated model,
the influence of different rivet hardness profiles on the joint formation is analysed
numerically. By adapting the material model, a high level of correlation between
the experiment's joint formation and the simulation can be achieved.
author:
- first_name: Pia Katharina
full_name: Holtkamp, Pia Katharina
id: '44935'
last_name: Holtkamp
- first_name: Christian Roman
full_name: Bielak, Christian Roman
id: '34782'
last_name: Bielak
- first_name: Mathias
full_name: Bobbert, Mathias
id: '7850'
last_name: Bobbert
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Holtkamp PK, Bielak CR, Bobbert M, Meschut G. Simulation of the joining process
of graded hardened multi-range capable rivets. In: Materials Research Proceedings.
Vol 54. Materials Research Forum LLC; 2025. doi:10.21741/9781644903599-153'
apa: Holtkamp, P. K., Bielak, C. R., Bobbert, M., & Meschut, G. (2025). Simulation
of the joining process of graded hardened multi-range capable rivets. Materials
Research Proceedings, 54. https://doi.org/10.21741/9781644903599-153
bibtex: '@inproceedings{Holtkamp_Bielak_Bobbert_Meschut_2025, title={Simulation
of the joining process of graded hardened multi-range capable rivets}, volume={54},
DOI={10.21741/9781644903599-153},
booktitle={Materials Research Proceedings}, publisher={Materials Research Forum
LLC}, author={Holtkamp, Pia Katharina and Bielak, Christian Roman and Bobbert,
Mathias and Meschut, Gerson}, year={2025} }'
chicago: Holtkamp, Pia Katharina, Christian Roman Bielak, Mathias Bobbert, and Gerson
Meschut. “Simulation of the Joining Process of Graded Hardened Multi-Range Capable
Rivets.” In Materials Research Proceedings, Vol. 54. Materials Research
Forum LLC, 2025. https://doi.org/10.21741/9781644903599-153.
ieee: 'P. K. Holtkamp, C. R. Bielak, M. Bobbert, and G. Meschut, “Simulation of
the joining process of graded hardened multi-range capable rivets,” in Materials
Research Proceedings, 2025, vol. 54, doi: 10.21741/9781644903599-153.'
mla: Holtkamp, Pia Katharina, et al. “Simulation of the Joining Process of Graded
Hardened Multi-Range Capable Rivets.” Materials Research Proceedings, vol.
54, Materials Research Forum LLC, 2025, doi:10.21741/9781644903599-153.
short: 'P.K. Holtkamp, C.R. Bielak, M. Bobbert, G. Meschut, in: Materials Research
Proceedings, Materials Research Forum LLC, 2025.'
date_created: 2025-06-27T08:23:00Z
date_updated: 2026-02-24T14:12:10Z
department:
- _id: '43'
- _id: '157'
doi: 10.21741/9781644903599-153
intvolume: ' 54'
language:
- iso: eng
project:
- _id: '130'
name: 'TRR 285: TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen
Prozessketten'
- _id: '133'
name: 'TRR 285 - C: TRR 285 - Project Area C'
- _id: '146'
name: 'TRR 285 – C02: TRR 285 - Subproject C02'
- _id: '131'
name: 'TRR 285 - A: TRR 285 - Project Area A'
- _id: '135'
name: 'TRR 285 – A01: TRR 285 - Subproject A01'
publication: Materials Research Proceedings
publication_identifier:
issn:
- 2474-395X
publication_status: published
publisher: Materials Research Forum LLC
quality_controlled: '1'
status: public
title: Simulation of the joining process of graded hardened multi-range capable rivets
type: conference
user_id: '7850'
volume: 54
year: '2025'
...
---
_id: '64562'
abstract:
- lang: ger
text: Für das Verständnis und die Weiterentwicklung temperaturgestützter mechanischer
Fü-geprozesse mit thermoplastischen Faser-Kunststoff-Verbunden (FKV) ist die zerstörungsfreie
Analyse der Materialstruktur im Inneren des Fügepunktes während der Entstehung
und Belastung erforderlich. Die Kombination aus Prüfung unter Temperatureinfluss
und in situ Computertomographie (CT) eröffnet neue Möglichkeiten für die Fügeprozessanalyse.
Dazu wurde dazu eine Thermokammer entwickelt und in eine bestehende in situ CT-Anlage
integriert. Anwendungsszenarien sind die Herstellung und Prüfung von Fügepunkten
unter Temperatur. Die Erwärmung erfolgt über einzeln regelbare Heizzonen, welche
eine gezielte Temperaturführung über die gesamte Probengeometrie ermöglichen.
Die Temperaturkurve eines Aufheizversuchs, sowie eine Röntgenprojektion einer
Probe innerhalb der Thermokammer validie-ren die Konstruktion.
author:
- first_name: Alrik
full_name: Dargel, Alrik
id: '114764'
last_name: Dargel
- first_name: Daniel
full_name: Köhler, Daniel
id: '83408'
last_name: Köhler
- first_name: Maik
full_name: Gude, Maik
last_name: Gude
- first_name: Robert
full_name: Kupfer, Robert
last_name: Kupfer
citation:
ama: 'Dargel A, Köhler D, Gude M, Kupfer R. In situ CT unter Temperatur: Thermokammer
für thermoplastische FKV-Fügeprozesse. In: Zimmermann M, ed. Tagungsband 43.
Vortrags- und Diskussionstagung Werkstoffprüfung 2025. Vol 43. Deutsche Gesellschaft
für Materialkunde e.V. (DGM); 2025:165-170.'
apa: 'Dargel, A., Köhler, D., Gude, M., & Kupfer, R. (2025). In situ CT unter
Temperatur: Thermokammer für thermoplastische FKV-Fügeprozesse. In M. Zimmermann
(Ed.), Tagungsband 43. Vortrags- und Diskussionstagung Werkstoffprüfung 2025
(Vol. 43, pp. 165–170). Deutsche Gesellschaft für Materialkunde e.V. (DGM).'
bibtex: '@inproceedings{Dargel_Köhler_Gude_Kupfer_2025, place={Sankt Augustin},
title={In situ CT unter Temperatur: Thermokammer für thermoplastische FKV-Fügeprozesse},
volume={43}, booktitle={Tagungsband 43. Vortrags- und Diskussionstagung Werkstoffprüfung
2025}, publisher={Deutsche Gesellschaft für Materialkunde e.V. (DGM)}, author={Dargel,
Alrik and Köhler, Daniel and Gude, Maik and Kupfer, Robert}, editor={Zimmermann,
Martina}, year={2025}, pages={165–170} }'
chicago: 'Dargel, Alrik, Daniel Köhler, Maik Gude, and Robert Kupfer. “In situ CT
unter Temperatur: Thermokammer für thermoplastische FKV-Fügeprozesse.” In Tagungsband
43. Vortrags- und Diskussionstagung Werkstoffprüfung 2025, edited by Martina
Zimmermann, 43:165–70. Sankt Augustin: Deutsche Gesellschaft für Materialkunde
e.V. (DGM), 2025.'
ieee: 'A. Dargel, D. Köhler, M. Gude, and R. Kupfer, “In situ CT unter Temperatur:
Thermokammer für thermoplastische FKV-Fügeprozesse,” in Tagungsband 43. Vortrags-
und Diskussionstagung Werkstoffprüfung 2025, Dresden, 2025, vol. 43, pp. 165–170.'
mla: 'Dargel, Alrik, et al. “In situ CT unter Temperatur: Thermokammer für thermoplastische
FKV-Fügeprozesse.” Tagungsband 43. Vortrags- und Diskussionstagung Werkstoffprüfung
2025, edited by Martina Zimmermann, vol. 43, Deutsche Gesellschaft für Materialkunde
e.V. (DGM), 2025, pp. 165–70.'
short: 'A. Dargel, D. Köhler, M. Gude, R. Kupfer, in: M. Zimmermann (Ed.), Tagungsband
43. Vortrags- und Diskussionstagung Werkstoffprüfung 2025, Deutsche Gesellschaft
für Materialkunde e.V. (DGM), Sankt Augustin, 2025, pp. 165–170.'
conference:
end_date: 2025-11-28
location: Dresden
name: 43. Vortrags- und Diskussionstagung Werkstoffprüfung 2025
start_date: 2025-11-27
date_created: 2026-02-20T14:17:33Z
date_updated: 2026-02-24T15:12:59Z
ddc:
- '620'
editor:
- first_name: Martina
full_name: Zimmermann, Martina
last_name: Zimmermann
file:
- access_level: closed
content_type: application/pdf
creator: adargel
date_created: 2026-02-20T14:14:36Z
date_updated: 2026-02-20T14:14:36Z
file_id: '64564'
file_name: V-31-Dargel_v03.pdf
file_size: 398450
relation: main_file
success: 1
file_date_updated: 2026-02-20T14:14:36Z
has_accepted_license: '1'
intvolume: ' 43'
keyword:
- in situ CT
- Thermokammer
- Thermoplastische FKV
language:
- iso: ger
page: 165-170
place: Sankt Augustin
project:
- _id: '130'
name: 'TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen
Prozessketten'
- _id: '148'
name: TRR 285 - Subproject C04
publication: Tagungsband 43. Vortrags- und Diskussionstagung Werkstoffprüfung 2025
publication_identifier:
isbn:
- 978-3-88355-454-9
publication_status: published
publisher: Deutsche Gesellschaft für Materialkunde e.V. (DGM)
status: public
title: 'In situ CT unter Temperatur: Thermokammer für thermoplastische FKV-Fügeprozesse'
type: conference
user_id: '114764'
volume: 43
year: '2025'
...
---
_id: '61767'
abstract:
- lang: eng
text: "Abstract\r\n A clinch point’s quality
is usually assessed using ex situ destructive testing methods. These, however,
are unable to detect phenomena immediately during the joining process. For instance,
elastic deformations reverse and cracks close after unloading. In situ methods
such as the force-displacement evaluation are used to investigate a clinching
process, though deviations in the clinch point geometry cannot be derived with
this method. To overcome these limitations, the clinching process can be investigated
using in situ computed tomography (in situ CT). When investigating the clinching
of aluminum parts in in situ CT, the sheet-sheet interface is hardly visible.
Earlier investigations showed that radiopaque materials can be applied between
the joining parts to enhance the detectability of the sheet-sheet interface. However,
the layers cause strong artefacts, break during the clinching process or change
the clinch joint’s properties significantly. In this paper, a minimally invasive
method to enhance the interface detectability is presented. First, the aluminum
oxide layer is removed by etching. Second, the specimen is electroplated with
copper or gold, respectively. In some cases, a mask is applied to create a cross-shaped
plating pattern. Then, the plated specimen is clinched with a non-plated counterpart
and the interface detectability of the clinch points is assessed in CT scans.
It is shown that a copper plating of 2.6–4 μm can visualize some parts of the
interface, while 7–9 μm is suitable to enhance the detectability of the sheet-sheet
interface almost continuously."
article_number: '131'
article_type: original
author:
- first_name: Daniel
full_name: Köhler, Daniel
id: '83408'
last_name: Köhler
- first_name: Alrik
full_name: Dargel, Alrik
id: '114764'
last_name: Dargel
- first_name: Juliane
full_name: Troschitz, Juliane
last_name: Troschitz
- first_name: Maik
full_name: Gude, Maik
last_name: Gude
- first_name: Robert
full_name: Kupfer, Robert
last_name: Kupfer
citation:
ama: Köhler D, Dargel A, Troschitz J, Gude M, Kupfer R. In Situ CT of Clinch Points
– Enhancing Interface Detectability Using Electroplated Patterns of Radiopaque
Materials. Journal of Nondestructive Evaluation. 2025;44(4). doi:10.1007/s10921-025-01270-1
apa: Köhler, D., Dargel, A., Troschitz, J., Gude, M., & Kupfer, R. (2025). In
Situ CT of Clinch Points – Enhancing Interface Detectability Using Electroplated
Patterns of Radiopaque Materials. Journal of Nondestructive Evaluation,
44(4), Article 131. https://doi.org/10.1007/s10921-025-01270-1
bibtex: '@article{Köhler_Dargel_Troschitz_Gude_Kupfer_2025, title={In Situ CT of
Clinch Points – Enhancing Interface Detectability Using Electroplated Patterns
of Radiopaque Materials}, volume={44}, DOI={10.1007/s10921-025-01270-1},
number={4131}, journal={Journal of Nondestructive Evaluation}, publisher={Springer
Science and Business Media LLC}, author={Köhler, Daniel and Dargel, Alrik and
Troschitz, Juliane and Gude, Maik and Kupfer, Robert}, year={2025} }'
chicago: Köhler, Daniel, Alrik Dargel, Juliane Troschitz, Maik Gude, and Robert
Kupfer. “In Situ CT of Clinch Points – Enhancing Interface Detectability Using
Electroplated Patterns of Radiopaque Materials.” Journal of Nondestructive
Evaluation 44, no. 4 (2025). https://doi.org/10.1007/s10921-025-01270-1.
ieee: 'D. Köhler, A. Dargel, J. Troschitz, M. Gude, and R. Kupfer, “In Situ CT of
Clinch Points – Enhancing Interface Detectability Using Electroplated Patterns
of Radiopaque Materials,” Journal of Nondestructive Evaluation, vol. 44,
no. 4, Art. no. 131, 2025, doi: 10.1007/s10921-025-01270-1.'
mla: Köhler, Daniel, et al. “In Situ CT of Clinch Points – Enhancing Interface Detectability
Using Electroplated Patterns of Radiopaque Materials.” Journal of Nondestructive
Evaluation, vol. 44, no. 4, 131, Springer Science and Business Media LLC,
2025, doi:10.1007/s10921-025-01270-1.
short: D. Köhler, A. Dargel, J. Troschitz, M. Gude, R. Kupfer, Journal of Nondestructive
Evaluation 44 (2025).
date_created: 2025-10-09T08:27:41Z
date_updated: 2026-02-24T15:13:52Z
doi: 10.1007/s10921-025-01270-1
intvolume: ' 44'
issue: '4'
language:
- iso: eng
project:
- _id: '133'
name: TRR 285 - Project Area C
- _id: '130'
name: 'TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen
Prozessketten'
- _id: '148'
name: TRR 285 - Subproject C04
publication: Journal of Nondestructive Evaluation
publication_identifier:
issn:
- 0195-9298
- 1573-4862
publication_status: published
publisher: Springer Science and Business Media LLC
status: public
title: In Situ CT of Clinch Points – Enhancing Interface Detectability Using Electroplated
Patterns of Radiopaque Materials
type: journal_article
user_id: '114764'
volume: 44
year: '2025'
...
---
_id: '61161'
abstract:
- lang: eng
text: "Abstract\r\n The effects of corrosion
on clinched joints are not completely understood yet. Recent research indicates
that galvanic corrosion can actually enhance the fatigue life of clinched joints.
It is then of significant interest to investigate the effects of another corrosion
phenomenon, pitting corrosion, on the fatigue behavior of clinched joints. Pitting
corrosion occurs in passive metals and can lead to stress concentrations. In the
present study, the effects of pitting corrosion are investigated by using Lemaitre’s
two-scale fatigue model with a 2D geometry of clinched joints. A slip condition
is applied as a boundary condition to simplify the clinched joint model and reduce
the computational cost of solving the contact mechanics problem. Additionally,
a method to determine the damage strength and the damage exponent used in the
two-scale damage model is introduced. Numerical simulations reveal that pitting
corrosion reduces the fatigue life of clinched joints, particularly when it occurs
on the internal surface in the neck area."
author:
- first_name: Chin
full_name: Chen, Chin
id: '114741'
last_name: Chen
- first_name: Sven
full_name: Harzheim, Sven
last_name: Harzheim
- first_name: Martin
full_name: Hofmann, Martin
last_name: Hofmann
- first_name: Thomas
full_name: Wallmersperger, Thomas
last_name: Wallmersperger
citation:
ama: Chen C, Harzheim S, Hofmann M, Wallmersperger T. Numerical investigation of
the effects of pitting corrosion on high-cycle fatigue of clinched joints. Acta
Mechanica. Published online 2025. doi:10.1007/s00707-025-04234-8
apa: Chen, C., Harzheim, S., Hofmann, M., & Wallmersperger, T. (2025). Numerical
investigation of the effects of pitting corrosion on high-cycle fatigue of clinched
joints. Acta Mechanica. https://doi.org/10.1007/s00707-025-04234-8
bibtex: '@article{Chen_Harzheim_Hofmann_Wallmersperger_2025, title={Numerical investigation
of the effects of pitting corrosion on high-cycle fatigue of clinched joints},
DOI={10.1007/s00707-025-04234-8},
journal={Acta Mechanica}, publisher={Springer Science and Business Media LLC},
author={Chen, Chin and Harzheim, Sven and Hofmann, Martin and Wallmersperger,
Thomas}, year={2025} }'
chicago: Chen, Chin, Sven Harzheim, Martin Hofmann, and Thomas Wallmersperger. “Numerical
Investigation of the Effects of Pitting Corrosion on High-Cycle Fatigue of Clinched
Joints.” Acta Mechanica, 2025. https://doi.org/10.1007/s00707-025-04234-8.
ieee: 'C. Chen, S. Harzheim, M. Hofmann, and T. Wallmersperger, “Numerical investigation
of the effects of pitting corrosion on high-cycle fatigue of clinched joints,”
Acta Mechanica, 2025, doi: 10.1007/s00707-025-04234-8.'
mla: Chen, Chin, et al. “Numerical Investigation of the Effects of Pitting Corrosion
on High-Cycle Fatigue of Clinched Joints.” Acta Mechanica, Springer Science
and Business Media LLC, 2025, doi:10.1007/s00707-025-04234-8.
short: C. Chen, S. Harzheim, M. Hofmann, T. Wallmersperger, Acta Mechanica (2025).
date_created: 2025-09-10T07:52:43Z
date_updated: 2026-02-24T15:11:39Z
doi: 10.1007/s00707-025-04234-8
language:
- iso: eng
project:
- _id: '142'
name: TRR 285 - Subproject B03
- _id: '132'
name: TRR 285 - Project Area B
- _id: '130'
name: 'TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen
Prozessketten'
publication: Acta Mechanica
publication_identifier:
issn:
- 0001-5970
- 1619-6937
publication_status: published
publisher: Springer Science and Business Media LLC
status: public
title: Numerical investigation of the effects of pitting corrosion on high-cycle fatigue
of clinched joints
type: journal_article
user_id: '114741'
year: '2025'
...
---
_id: '61411'
abstract:
- lang: eng
text: "Abstract\r\n The effect of corrosion
on mechanically joined components is not well understood. While recent research
shows that a brief exposure of clinched specimens to a salt spray environment
improves the specimens’ fatigue life, other research shows a decrease in load
bearing capabilities with increasing corrosion times. These studies primarily
focus on galvanic corrosion. It is not entirely clear how other corrosion phenomena,
such as pitting corrosion, affect the fatigue life of clinched joints. In this
work, a numerical model is used, which is able to simulate corrosion pit growth
in EN AW-6014. The experimental polarization data of EN AW-6014 are used directly
in the calculation of the interface kinetics parameter of the model."
author:
- first_name: Sven
full_name: Harzheim, Sven
last_name: Harzheim
- first_name: Chin
full_name: Chen, Chin
id: '114741'
last_name: Chen
- first_name: Katharina
full_name: Hollmer, Katharina
last_name: Hollmer
- first_name: Martin
full_name: Hofmann, Martin
last_name: Hofmann
- first_name: Martina
full_name: Zimmermann, Martina
last_name: Zimmermann
- first_name: Thomas
full_name: Wallmersperger, Thomas
last_name: Wallmersperger
citation:
ama: Harzheim S, Chen C, Hollmer K, Hofmann M, Zimmermann M, Wallmersperger T. Numerical
investigation of pitting corrosion in clinched joints. Acta Mechanica.
Published online 2025. doi:10.1007/s00707-025-04248-2
apa: Harzheim, S., Chen, C., Hollmer, K., Hofmann, M., Zimmermann, M., & Wallmersperger,
T. (2025). Numerical investigation of pitting corrosion in clinched joints. Acta
Mechanica. https://doi.org/10.1007/s00707-025-04248-2
bibtex: '@article{Harzheim_Chen_Hollmer_Hofmann_Zimmermann_Wallmersperger_2025,
title={Numerical investigation of pitting corrosion in clinched joints}, DOI={10.1007/s00707-025-04248-2},
journal={Acta Mechanica}, publisher={Springer Science and Business Media LLC},
author={Harzheim, Sven and Chen, Chin and Hollmer, Katharina and Hofmann, Martin
and Zimmermann, Martina and Wallmersperger, Thomas}, year={2025} }'
chicago: Harzheim, Sven, Chin Chen, Katharina Hollmer, Martin Hofmann, Martina Zimmermann,
and Thomas Wallmersperger. “Numerical Investigation of Pitting Corrosion in Clinched
Joints.” Acta Mechanica, 2025. https://doi.org/10.1007/s00707-025-04248-2.
ieee: 'S. Harzheim, C. Chen, K. Hollmer, M. Hofmann, M. Zimmermann, and T. Wallmersperger,
“Numerical investigation of pitting corrosion in clinched joints,” Acta Mechanica,
2025, doi: 10.1007/s00707-025-04248-2.'
mla: Harzheim, Sven, et al. “Numerical Investigation of Pitting Corrosion in Clinched
Joints.” Acta Mechanica, Springer Science and Business Media LLC, 2025,
doi:10.1007/s00707-025-04248-2.
short: S. Harzheim, C. Chen, K. Hollmer, M. Hofmann, M. Zimmermann, T. Wallmersperger,
Acta Mechanica (2025).
date_created: 2025-09-23T11:58:18Z
date_updated: 2026-02-24T15:12:17Z
doi: 10.1007/s00707-025-04248-2
language:
- iso: eng
project:
- _id: '132'
name: TRR 285 - Project Area B
- _id: '142'
name: TRR 285 - Subproject B03
- _id: '130'
name: 'TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen
Prozessketten'
publication: Acta Mechanica
publication_identifier:
issn:
- 0001-5970
- 1619-6937
publication_status: published
publisher: Springer Science and Business Media LLC
status: public
title: Numerical investigation of pitting corrosion in clinched joints
type: journal_article
user_id: '114741'
year: '2025'
...
---
_id: '59783'
author:
- first_name: D. A.
full_name: Mauro, D. A.
last_name: Mauro
- first_name: L. A.
full_name: Ludovico, L. A.
last_name: Ludovico
- first_name: H. H.
full_name: Aydin, H. H.
last_name: Aydin
- first_name: Axel
full_name: Berndt, Axel
id: '55565'
last_name: Berndt
- first_name: T.
full_name: Grothe, T.
last_name: Grothe
citation:
ama: 'Mauro DA, Ludovico LA, Aydin HH, Berndt A, Grothe T. Detmold musical Instrument
Timbre Explorer (DmITE): Interactive visualization of musical instruments radiation
pattern using IEEE 1599. In: AM.ICAD: Audio Mostly & ICAD Joint Conf.
ACM; 2025.'
apa: 'Mauro, D. A., Ludovico, L. A., Aydin, H. H., Berndt, A., & Grothe, T.
(2025). Detmold musical Instrument Timbre Explorer (DmITE): Interactive visualization
of musical instruments radiation pattern using IEEE 1599. AM.ICAD: Audio Mostly
& ICAD Joint Conf.'
bibtex: '@inproceedings{Mauro_Ludovico_Aydin_Berndt_Grothe_2025, place={Coimbra,
Portugal}, title={Detmold musical Instrument Timbre Explorer (DmITE): Interactive
visualization of musical instruments radiation pattern using IEEE 1599}, booktitle={AM.ICAD:
Audio Mostly & ICAD Joint Conf.}, publisher={ACM}, author={Mauro, D. A. and
Ludovico, L. A. and Aydin, H. H. and Berndt, Axel and Grothe, T.}, year={2025}
}'
chicago: 'Mauro, D. A., L. A. Ludovico, H. H. Aydin, Axel Berndt, and T. Grothe.
“Detmold Musical Instrument Timbre Explorer (DmITE): Interactive Visualization
of Musical Instruments Radiation Pattern Using IEEE 1599.” In AM.ICAD: Audio
Mostly & ICAD Joint Conf. Coimbra, Portugal: ACM, 2025.'
ieee: 'D. A. Mauro, L. A. Ludovico, H. H. Aydin, A. Berndt, and T. Grothe, “Detmold
musical Instrument Timbre Explorer (DmITE): Interactive visualization of musical
instruments radiation pattern using IEEE 1599,” 2025.'
mla: 'Mauro, D. A., et al. “Detmold Musical Instrument Timbre Explorer (DmITE):
Interactive Visualization of Musical Instruments Radiation Pattern Using IEEE
1599.” AM.ICAD: Audio Mostly & ICAD Joint Conf., ACM, 2025.'
short: 'D.A. Mauro, L.A. Ludovico, H.H. Aydin, A. Berndt, T. Grothe, in: AM.ICAD:
Audio Mostly & ICAD Joint Conf., ACM, Coimbra, Portugal, 2025.'
date_created: 2025-05-03T08:40:25Z
date_updated: 2026-02-24T15:22:59Z
department:
- _id: '36'
- _id: '233'
- _id: '870'
language:
- iso: eng
place: Coimbra, Portugal
publication: 'AM.ICAD: Audio Mostly & ICAD Joint Conf.'
publisher: ACM
status: public
title: 'Detmold musical Instrument Timbre Explorer (DmITE): Interactive visualization
of musical instruments radiation pattern using IEEE 1599'
type: conference
user_id: '14972'
year: '2025'
...
---
_id: '59748'
author:
- first_name: T.
full_name: Grothe, T.
last_name: Grothe
- first_name: H. B.
full_name: Aydin, H. B.
last_name: Aydin
- first_name: D. A.
full_name: Mauro, D. A.
last_name: Mauro
- first_name: L. A.
full_name: Ludovico, L. A.
last_name: Ludovico
- first_name: Axel
full_name: Berndt, Axel
id: '55565'
last_name: Berndt
citation:
ama: 'Grothe T, Aydin HB, Mauro DA, Ludovico LA, Berndt A. Detmold interactive Musical
Instrument Timbre Explorer (DmITE) - a web application for experimental learning
in musical acoustics. In: DAS/DAGA 2025 – 51st Annual Meeting on Acoustics.
; 2025.'
apa: Grothe, T., Aydin, H. B., Mauro, D. A., Ludovico, L. A., & Berndt, A. (2025).
Detmold interactive Musical Instrument Timbre Explorer (DmITE) - a web application
for experimental learning in musical acoustics. DAS/DAGA 2025 – 51st Annual
Meeting on Acoustics.
bibtex: '@inproceedings{Grothe_Aydin_Mauro_Ludovico_Berndt_2025, place={Copenhagen,
Denmark}, title={Detmold interactive Musical Instrument Timbre Explorer (DmITE)
- a web application for experimental learning in musical acoustics}, booktitle={DAS/DAGA
2025 – 51st Annual Meeting on Acoustics}, author={Grothe, T. and Aydin, H. B.
and Mauro, D. A. and Ludovico, L. A. and Berndt, Axel}, year={2025} }'
chicago: Grothe, T., H. B. Aydin, D. A. Mauro, L. A. Ludovico, and Axel Berndt.
“Detmold Interactive Musical Instrument Timbre Explorer (DmITE) - a Web Application
for Experimental Learning in Musical Acoustics.” In DAS/DAGA 2025 – 51st Annual
Meeting on Acoustics. Copenhagen, Denmark, 2025.
ieee: T. Grothe, H. B. Aydin, D. A. Mauro, L. A. Ludovico, and A. Berndt, “Detmold
interactive Musical Instrument Timbre Explorer (DmITE) - a web application for
experimental learning in musical acoustics,” 2025.
mla: Grothe, T., et al. “Detmold Interactive Musical Instrument Timbre Explorer
(DmITE) - a Web Application for Experimental Learning in Musical Acoustics.” DAS/DAGA
2025 – 51st Annual Meeting on Acoustics, 2025.
short: 'T. Grothe, H.B. Aydin, D.A. Mauro, L.A. Ludovico, A. Berndt, in: DAS/DAGA
2025 – 51st Annual Meeting on Acoustics, Copenhagen, Denmark, 2025.'
date_created: 2025-05-01T13:15:36Z
date_updated: 2026-02-24T15:20:32Z
department:
- _id: '36'
- _id: '233'
- _id: '870'
language:
- iso: eng
place: Copenhagen, Denmark
publication: DAS/DAGA 2025 – 51st Annual Meeting on Acoustics
status: public
title: Detmold interactive Musical Instrument Timbre Explorer (DmITE) - a web application
for experimental learning in musical acoustics
type: conference
user_id: '14972'
year: '2025'
...
---
_id: '59782'
author:
- first_name: M.
full_name: Kallionpää, M.
last_name: Kallionpää
- first_name: Axel
full_name: Berndt, Axel
id: '55565'
last_name: Berndt
- first_name: D. A.
full_name: Mauro, D. A.
last_name: Mauro
- first_name: D.
full_name: Dziwis, D.
last_name: Dziwis
citation:
ama: 'Kallionpää M, Berndt A, Mauro DA, Dziwis D. Non/Repeat: Three Case Studies
of Non-linear Live-Music Practices. In: AM.ICAD: Audio Mostly & ICAD Joint
Conf. ACM; 2025.'
apa: 'Kallionpää, M., Berndt, A., Mauro, D. A., & Dziwis, D. (2025). Non/Repeat:
Three Case Studies of Non-linear Live-Music Practices. AM.ICAD: Audio Mostly
& ICAD Joint Conf.'
bibtex: '@inproceedings{Kallionpää_Berndt_Mauro_Dziwis_2025, place={Coimbra, Portugal},
title={Non/Repeat: Three Case Studies of Non-linear Live-Music Practices}, booktitle={AM.ICAD:
Audio Mostly & ICAD Joint Conf.}, publisher={ACM}, author={Kallionpää, M.
and Berndt, Axel and Mauro, D. A. and Dziwis, D.}, year={2025} }'
chicago: 'Kallionpää, M., Axel Berndt, D. A. Mauro, and D. Dziwis. “Non/Repeat:
Three Case Studies of Non-Linear Live-Music Practices.” In AM.ICAD: Audio Mostly
& ICAD Joint Conf. Coimbra, Portugal: ACM, 2025.'
ieee: 'M. Kallionpää, A. Berndt, D. A. Mauro, and D. Dziwis, “Non/Repeat: Three
Case Studies of Non-linear Live-Music Practices,” 2025.'
mla: 'Kallionpää, M., et al. “Non/Repeat: Three Case Studies of Non-Linear Live-Music
Practices.” AM.ICAD: Audio Mostly & ICAD Joint Conf., ACM, 2025.'
short: 'M. Kallionpää, A. Berndt, D.A. Mauro, D. Dziwis, in: AM.ICAD: Audio Mostly
& ICAD Joint Conf., ACM, Coimbra, Portugal, 2025.'
date_created: 2025-05-03T08:40:17Z
date_updated: 2026-02-24T15:22:14Z
department:
- _id: '36'
- _id: '233'
- _id: '870'
language:
- iso: eng
place: Coimbra, Portugal
publication: 'AM.ICAD: Audio Mostly & ICAD Joint Conf.'
publisher: ACM
status: public
title: 'Non/Repeat: Three Case Studies of Non-linear Live-Music Practices'
type: conference
user_id: '14972'
year: '2025'
...
---
_id: '59750'
author:
- first_name: D. A.
full_name: Mauro, D. A.
last_name: Mauro
- first_name: Axel
full_name: Berndt, Axel
id: '55565'
last_name: Berndt
citation:
ama: 'Mauro DA, Berndt A. Automatic Rendering of Ramati’s Ludus Musicalis Scores.
In: 22nd Sound and Music Computing Conf. (SMC 2025), Auditory Landscapes.
; 2025.'
apa: Mauro, D. A., & Berndt, A. (2025). Automatic Rendering of Ramati’s Ludus
Musicalis Scores. 22nd Sound and Music Computing Conf. (SMC 2025), Auditory
Landscapes.
bibtex: '@inproceedings{Mauro_Berndt_2025, place={Graz, Austria}, title={Automatic
Rendering of Ramati’s Ludus Musicalis Scores}, booktitle={22nd Sound and Music
Computing Conf. (SMC 2025), Auditory Landscapes}, author={Mauro, D. A. and Berndt,
Axel}, year={2025} }'
chicago: Mauro, D. A., and Axel Berndt. “Automatic Rendering of Ramati’s Ludus Musicalis
Scores.” In 22nd Sound and Music Computing Conf. (SMC 2025), Auditory Landscapes.
Graz, Austria, 2025.
ieee: D. A. Mauro and A. Berndt, “Automatic Rendering of Ramati’s Ludus Musicalis
Scores,” 2025.
mla: Mauro, D. A., and Axel Berndt. “Automatic Rendering of Ramati’s Ludus Musicalis
Scores.” 22nd Sound and Music Computing Conf. (SMC 2025), Auditory Landscapes,
2025.
short: 'D.A. Mauro, A. Berndt, in: 22nd Sound and Music Computing Conf. (SMC 2025),
Auditory Landscapes, Graz, Austria, 2025.'
date_created: 2025-05-01T13:16:17Z
date_updated: 2026-02-24T15:21:30Z
department:
- _id: '36'
- _id: '233'
- _id: '870'
language:
- iso: eng
place: Graz, Austria
publication: 22nd Sound and Music Computing Conf. (SMC 2025), Auditory Landscapes
status: public
title: Automatic Rendering of Ramati’s Ludus Musicalis Scores
type: conference
user_id: '14972'
year: '2025'
...
---
_id: '63830'
abstract:
- lang: eng
text: " This study investigates the effect of dispersion gas (DG) flow on the formation
and properties of maghemite (γ-Fe2O3) nanoparticles using standardized SpraySyn
burners (SS1 and SS2). Several diagnostics were employed to characterize the spray
and nanoparticles. \r\nIncreasing DG flow (6 - 12 slm) results in smaller droplet
sizes (DS), cooler flame temperatures, shorter high-temperature droplet/particle
residence times, and smaller agglomerates in the size range of 5 - 12 nm with
narrower primary particle size distribution, corresponding to higher mass fractal
dimensions, as supported by TEM and SMPS analysis, resulting in more compact agglomerates.
BET and TEM confirmed decreasing primary particle sizes with increasing DG flow.
Raman and XRD analyses predominantly identified maghemite, which shows a bimodal
distribution of crystallite sizes, while SS1 samples have a greater proportion
of larger crystallites.\r\nThe self-preserving size distributions of agglomerates
with a geometric standard deviation of 1.5 are reached faster with increasing
DG flow. The barrier effect of DG observed in SS1 leads to slower droplet combustion
kinetics, higher temperatures, and delayed precursor release, which, along with
downstream flow recirculation, result in significantly higher agglomeration rates
outside the visible flame. SS2 demonstrates improved atomization, more stable
flames, and finer, uniform nanoparticles with less carbonaceous residues (CR).
Conversely, SS1 showed broader DS distributions and higher CR levels on the γ-Fe2O3
surface, especially at higher DG flow.\r\nThis work highlights the essential role
of DG flow and nozzle geometry in controlling droplet evaporation, flame stability,
and nanoparticle growth, offering insights for optimizing SFS and validating numerical
models.\r\n"
article_number: '121992'
article_type: original
author:
- first_name: Orlando
full_name: Massopo, Orlando
last_name: Massopo
- first_name: Ricardo
full_name: Tischendorf, Ricardo
last_name: Tischendorf
- first_name: Munko
full_name: Gonchikzhapov, Munko
last_name: Gonchikzhapov
- first_name: Tina
full_name: Kasper, Tina
last_name: Kasper
- first_name: Peter
full_name: Augustin, Peter
last_name: Augustin
- first_name: Burak
full_name: Özer, Burak
last_name: Özer
- first_name: Manuel
full_name: Reddemann, Manuel
last_name: Reddemann
- first_name: Reinhold
full_name: Kneer, Reinhold
last_name: Kneer
- first_name: Mohammed-Ali
full_name: Sheikh, Mohammed-Ali
last_name: Sheikh
- first_name: Aydan Akyildiz
full_name: Mert, Aydan Akyildiz
last_name: Mert
- first_name: Hartmut
full_name: Wiggers, Hartmut
last_name: Wiggers
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
last_name: Schmid
citation:
ama: Massopo O, Tischendorf R, Gonchikzhapov M, et al. Influence of dispersion gas
flow on the spray characteristics and γ-Fe2O3 nanoparticles formation and properties
in reference SpraySyn burners. Powder Technology. 2025;470. doi:10.1016/j.powtec.2025.121992
apa: Massopo, O., Tischendorf, R., Gonchikzhapov, M., Kasper, T., Augustin, P.,
Özer, B., Reddemann, M., Kneer, R., Sheikh, M.-A., Mert, A. A., Wiggers, H., &
Schmid, H.-J. (2025). Influence of dispersion gas flow on the spray characteristics
and γ-Fe2O3 nanoparticles formation and properties in reference SpraySyn burners.
Powder Technology, 470, Article 121992. https://doi.org/10.1016/j.powtec.2025.121992
bibtex: '@article{Massopo_Tischendorf_Gonchikzhapov_Kasper_Augustin_Özer_Reddemann_Kneer_Sheikh_Mert_et
al._2025, title={Influence of dispersion gas flow on the spray characteristics
and γ-Fe2O3 nanoparticles formation and properties in reference SpraySyn burners},
volume={470}, DOI={10.1016/j.powtec.2025.121992},
number={121992}, journal={Powder Technology}, publisher={Elsevier BV}, author={Massopo,
Orlando and Tischendorf, Ricardo and Gonchikzhapov, Munko and Kasper, Tina and
Augustin, Peter and Özer, Burak and Reddemann, Manuel and Kneer, Reinhold and
Sheikh, Mohammed-Ali and Mert, Aydan Akyildiz and et al.}, year={2025} }'
chicago: Massopo, Orlando, Ricardo Tischendorf, Munko Gonchikzhapov, Tina Kasper,
Peter Augustin, Burak Özer, Manuel Reddemann, et al. “Influence of Dispersion
Gas Flow on the Spray Characteristics and γ-Fe2O3 Nanoparticles Formation and
Properties in Reference SpraySyn Burners.” Powder Technology 470 (2025).
https://doi.org/10.1016/j.powtec.2025.121992.
ieee: 'O. Massopo et al., “Influence of dispersion gas flow on the spray
characteristics and γ-Fe2O3 nanoparticles formation and properties in reference
SpraySyn burners,” Powder Technology, vol. 470, Art. no. 121992, 2025,
doi: 10.1016/j.powtec.2025.121992.'
mla: Massopo, Orlando, et al. “Influence of Dispersion Gas Flow on the Spray Characteristics
and γ-Fe2O3 Nanoparticles Formation and Properties in Reference SpraySyn Burners.”
Powder Technology, vol. 470, 121992, Elsevier BV, 2025, doi:10.1016/j.powtec.2025.121992.
short: O. Massopo, R. Tischendorf, M. Gonchikzhapov, T. Kasper, P. Augustin, B.
Özer, M. Reddemann, R. Kneer, M.-A. Sheikh, A.A. Mert, H. Wiggers, H.-J. Schmid,
Powder Technology 470 (2025).
date_created: 2026-02-02T11:41:04Z
date_updated: 2026-02-25T07:45:44Z
doi: 10.1016/j.powtec.2025.121992
intvolume: ' 470'
keyword:
- Spray flame synthesis
- iron oxide nanoparticle
- SpraySyn burner
- Dispersion gas
- Coaxial atomization
- HiaT-SMPS
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
publication: Powder Technology
publication_identifier:
issn:
- 0032-5910
publication_status: published
publisher: Elsevier BV
status: public
title: Influence of dispersion gas flow on the spray characteristics and γ-Fe2O3 nanoparticles
formation and properties in reference SpraySyn burners
type: journal_article
user_id: '98419'
volume: 470
year: '2025'
...
---
_id: '64293'
author:
- first_name: Nils Christopher
full_name: Gerhardt, Nils Christopher
id: '115298'
last_name: Gerhardt
orcid: 0009-0002-5538-231X
- first_name: Martin R.
full_name: Hofmann, Martin R.
last_name: Hofmann
- first_name: Leon
full_name: Zens, Leon
last_name: Zens
- first_name: Jens
full_name: Möller, Jens
last_name: Möller
- first_name: Vira
full_name: Besaga, Vira
last_name: Besaga
citation:
ama: 'Gerhardt NC, Hofmann MR, Zens L, Möller J, Besaga V. Quantitative holography
for the characterisation of semiconductor amplifieres and lasers. In: Practical
Holography XXXIX: Displays, Materials, and Applications. ; 2025. doi:10.1117/12.3041318'
apa: 'Gerhardt, N. C., Hofmann, M. R., Zens, L., Möller, J., & Besaga, V. (2025).
Quantitative holography for the characterisation of semiconductor amplifieres
and lasers. Practical Holography XXXIX: Displays, Materials, and Applications.
https://doi.org/10.1117/12.3041318'
bibtex: '@inproceedings{Gerhardt_Hofmann_Zens_Möller_Besaga_2025, title={Quantitative
holography for the characterisation of semiconductor amplifieres and lasers},
DOI={10.1117/12.3041318}, booktitle={Practical
Holography XXXIX: Displays, Materials, and Applications}, author={Gerhardt, Nils
Christopher and Hofmann, Martin R. and Zens, Leon and Möller, Jens and Besaga,
Vira}, year={2025} }'
chicago: 'Gerhardt, Nils Christopher, Martin R. Hofmann, Leon Zens, Jens Möller,
and Vira Besaga. “Quantitative Holography for the Characterisation of Semiconductor
Amplifieres and Lasers.” In Practical Holography XXXIX: Displays, Materials,
and Applications, 2025. https://doi.org/10.1117/12.3041318.'
ieee: 'N. C. Gerhardt, M. R. Hofmann, L. Zens, J. Möller, and V. Besaga, “Quantitative
holography for the characterisation of semiconductor amplifieres and lasers,”
2025, doi: 10.1117/12.3041318.'
mla: 'Gerhardt, Nils Christopher, et al. “Quantitative Holography for the Characterisation
of Semiconductor Amplifieres and Lasers.” Practical Holography XXXIX: Displays,
Materials, and Applications, 2025, doi:10.1117/12.3041318.'
short: 'N.C. Gerhardt, M.R. Hofmann, L. Zens, J. Möller, V. Besaga, in: Practical
Holography XXXIX: Displays, Materials, and Applications, 2025.'
date_created: 2026-02-20T10:03:50Z
date_updated: 2026-02-25T09:34:37Z
department:
- _id: '977'
doi: 10.1117/12.3041318
language:
- iso: eng
publication: 'Practical Holography XXXIX: Displays, Materials, and Applications'
status: public
title: Quantitative holography for the characterisation of semiconductor amplifieres
and lasers
type: conference
user_id: '15911'
year: '2025'
...
---
_id: '50299'
abstract:
- lang: eng
text: "A finite classical polar space of rank $n$ consists of the totally isotropic\r\nsubspaces
of a finite vector space over $\\mathbb{F}_q$ equipped with a\r\nnondegenerate
form such that $n$ is the maximal dimension of such a subspace. A\r\n$t$-$(n,k,\\lambda)$
design in a finite classical polar space of rank $n$ is a\r\ncollection $Y$ of
totally isotropic $k$-spaces such that each totally isotropic\r\n$t$-space is
contained in exactly $\\lambda$ members of $Y$. Nontrivial examples\r\nare currently
only known for $t\\leq 2$. We show that $t$-$(n,k,\\lambda)$\r\ndesigns in polar
spaces exist for all $t$ and $q$ provided that\r\n$k>\\frac{21}{2}t$ and $n$ is
sufficiently large enough. The proof is based on a\r\nprobabilistic method by
Kuperberg, Lovett, and Peled, and it is thus\r\nnonconstructive."
author:
- first_name: Charlene
full_name: Weiß, Charlene
id: '70420'
last_name: Weiß
citation:
ama: Weiß C. Nontrivial $t$-designs in polar spaces exist for all $t$. Des Codes
Cryptogr. 2025;93:971-981. doi:10.1007/s10623-024-01471-1
apa: Weiß, C. (2025). Nontrivial $t$-designs in polar spaces exist for all $t$.
Des. Codes Cryptogr., 93, 971–981. https://doi.org/10.1007/s10623-024-01471-1
bibtex: '@article{Weiß_2025, title={Nontrivial $t$-designs in polar spaces exist
for all $t$}, volume={93}, DOI={10.1007/s10623-024-01471-1},
journal={Des. Codes Cryptogr.}, author={Weiß, Charlene}, year={2025}, pages={971–981}
}'
chicago: 'Weiß, Charlene. “Nontrivial $t$-Designs in Polar Spaces Exist for All
$t$.” Des. Codes Cryptogr. 93 (2025): 971–81. https://doi.org/10.1007/s10623-024-01471-1.'
ieee: 'C. Weiß, “Nontrivial $t$-designs in polar spaces exist for all $t$,” Des.
Codes Cryptogr., vol. 93, pp. 971–981, 2025, doi: 10.1007/s10623-024-01471-1.'
mla: Weiß, Charlene. “Nontrivial $t$-Designs in Polar Spaces Exist for All $t$.”
Des. Codes Cryptogr., vol. 93, 2025, pp. 971–81, doi:10.1007/s10623-024-01471-1.
short: C. Weiß, Des. Codes Cryptogr. 93 (2025) 971–981.
date_created: 2024-01-08T14:39:54Z
date_updated: 2026-02-25T13:51:50Z
department:
- _id: '100'
doi: 10.1007/s10623-024-01471-1
intvolume: ' 93'
language:
- iso: eng
page: 971 - 981
publication: Des. Codes Cryptogr.
publication_status: published
status: public
title: Nontrivial $t$-designs in polar spaces exist for all $t$
type: journal_article
user_id: '70420'
volume: 93
year: '2025'
...
---
_id: '64292'
author:
- first_name: M.
full_name: Lindemann, M.
last_name: Lindemann
- first_name: M.
full_name: D’Alessandro, M.
last_name: D’Alessandro
- first_name: N.
full_name: Ledentsov, N.
last_name: Ledentsov
- first_name: O. Y.
full_name: Makarov, O. Y.
last_name: Makarov
- first_name: N. N.
full_name: Ledentsov, N. N.
last_name: Ledentsov
- first_name: A.
full_name: Tibaldi, A.
last_name: Tibaldi
- first_name: N. C.
full_name: Gerhardt, N. C.
last_name: Gerhardt
- first_name: M. R.
full_name: Hofmann, M. R.
last_name: Hofmann
citation:
ama: Lindemann M, D’Alessandro M, Ledentsov N, et al. Laterally coupled vertical-cavity
surface-emitting lasers with tunable resonance width and frequency. Journal
of Applied Physics. 2025;138(5). doi:10.1063/5.0275622
apa: Lindemann, M., D’Alessandro, M., Ledentsov, N., Makarov, O. Y., Ledentsov,
N. N., Tibaldi, A., Gerhardt, N. C., & Hofmann, M. R. (2025). Laterally coupled
vertical-cavity surface-emitting lasers with tunable resonance width and frequency.
Journal of Applied Physics, 138(5). https://doi.org/10.1063/5.0275622
bibtex: '@article{Lindemann_D’Alessandro_Ledentsov_Makarov_Ledentsov_Tibaldi_Gerhardt_Hofmann_2025,
title={Laterally coupled vertical-cavity surface-emitting lasers with tunable
resonance width and frequency}, volume={138}, DOI={10.1063/5.0275622},
number={5}, journal={Journal of Applied Physics}, publisher={AIP Publishing},
author={Lindemann, M. and D’Alessandro, M. and Ledentsov, N. and Makarov, O. Y.
and Ledentsov, N. N. and Tibaldi, A. and Gerhardt, N. C. and Hofmann, M. R.},
year={2025} }'
chicago: Lindemann, M., M. D’Alessandro, N. Ledentsov, O. Y. Makarov, N. N. Ledentsov,
A. Tibaldi, N. C. Gerhardt, and M. R. Hofmann. “Laterally Coupled Vertical-Cavity
Surface-Emitting Lasers with Tunable Resonance Width and Frequency.” Journal
of Applied Physics 138, no. 5 (2025). https://doi.org/10.1063/5.0275622.
ieee: 'M. Lindemann et al., “Laterally coupled vertical-cavity surface-emitting
lasers with tunable resonance width and frequency,” Journal of Applied Physics,
vol. 138, no. 5, 2025, doi: 10.1063/5.0275622.'
mla: Lindemann, M., et al. “Laterally Coupled Vertical-Cavity Surface-Emitting Lasers
with Tunable Resonance Width and Frequency.” Journal of Applied Physics,
vol. 138, no. 5, AIP Publishing, 2025, doi:10.1063/5.0275622.
short: M. Lindemann, M. D’Alessandro, N. Ledentsov, O.Y. Makarov, N.N. Ledentsov,
A. Tibaldi, N.C. Gerhardt, M.R. Hofmann, Journal of Applied Physics 138 (2025).
date_created: 2026-02-20T10:03:50Z
date_updated: 2026-02-25T13:59:32Z
department:
- _id: '977'
doi: 10.1063/5.0275622
intvolume: ' 138'
issue: '5'
publication: Journal of Applied Physics
publication_identifier:
issn:
- 1089-7550
publisher: AIP Publishing
status: public
title: Laterally coupled vertical-cavity surface-emitting lasers with tunable resonance
width and frequency
type: journal_article
user_id: '15911'
volume: 138
year: '2025'
...
---
_id: '61918'
author:
- first_name: Jeroen
full_name: Rook, Jeroen
id: '102977'
last_name: Rook
- first_name: Quentin
full_name: Renau, Quentin
last_name: Renau
- first_name: Heike
full_name: Trautmann, Heike
id: '100740'
last_name: Trautmann
orcid: 0000-0002-9788-8282
- first_name: Emma
full_name: Hart, Emma
last_name: Hart
citation:
ama: 'Rook J, Renau Q, Trautmann H, Hart E. Efficient Online Automated Algorithm
Selection in the Face of Data-Drift in Optimisation Problem Instances. In: Proceedings
of the 18th ACM/SIGEVO Conference on Foundations of Genetic Algorithms, FOGA 2025,
Leiden, The Netherlands, August 27-29, 2025. ACM; 2025:262–272. doi:10.1145/3729878.3746615'
apa: Rook, J., Renau, Q., Trautmann, H., & Hart, E. (2025). Efficient Online
Automated Algorithm Selection in the Face of Data-Drift in Optimisation Problem
Instances. Proceedings of the 18th ACM/SIGEVO Conference on Foundations of
Genetic Algorithms, FOGA 2025, Leiden, The Netherlands, August 27-29, 2025,
262–272. https://doi.org/10.1145/3729878.3746615
bibtex: '@inproceedings{Rook_Renau_Trautmann_Hart_2025, title={Efficient Online
Automated Algorithm Selection in the Face of Data-Drift in Optimisation Problem
Instances}, DOI={10.1145/3729878.3746615},
booktitle={Proceedings of the 18th ACM/SIGEVO Conference on Foundations of Genetic
Algorithms, FOGA 2025, Leiden, The Netherlands, August 27-29, 2025}, publisher={ACM},
author={Rook, Jeroen and Renau, Quentin and Trautmann, Heike and Hart, Emma},
year={2025}, pages={262–272} }'
chicago: Rook, Jeroen, Quentin Renau, Heike Trautmann, and Emma Hart. “Efficient
Online Automated Algorithm Selection in the Face of Data-Drift in Optimisation
Problem Instances.” In Proceedings of the 18th ACM/SIGEVO Conference on Foundations
of Genetic Algorithms, FOGA 2025, Leiden, The Netherlands, August 27-29, 2025,
262–272. ACM, 2025. https://doi.org/10.1145/3729878.3746615.
ieee: 'J. Rook, Q. Renau, H. Trautmann, and E. Hart, “Efficient Online Automated
Algorithm Selection in the Face of Data-Drift in Optimisation Problem Instances,”
in Proceedings of the 18th ACM/SIGEVO Conference on Foundations of Genetic
Algorithms, FOGA 2025, Leiden, The Netherlands, August 27-29, 2025, 2025,
pp. 262–272, doi: 10.1145/3729878.3746615.'
mla: Rook, Jeroen, et al. “Efficient Online Automated Algorithm Selection in the
Face of Data-Drift in Optimisation Problem Instances.” Proceedings of the 18th
ACM/SIGEVO Conference on Foundations of Genetic Algorithms, FOGA 2025, Leiden,
The Netherlands, August 27-29, 2025, ACM, 2025, pp. 262–272, doi:10.1145/3729878.3746615.
short: 'J. Rook, Q. Renau, H. Trautmann, E. Hart, in: Proceedings of the 18th ACM/SIGEVO
Conference on Foundations of Genetic Algorithms, FOGA 2025, Leiden, The Netherlands,
August 27-29, 2025, ACM, 2025, pp. 262–272.'
date_created: 2025-10-22T07:26:45Z
date_updated: 2026-02-25T14:31:18Z
department:
- _id: '819'
doi: 10.1145/3729878.3746615
language:
- iso: eng
page: 262–272
publication: Proceedings of the 18th ACM/SIGEVO Conference on Foundations of Genetic
Algorithms, FOGA 2025, Leiden, The Netherlands, August 27-29, 2025
publisher: ACM
status: public
title: Efficient Online Automated Algorithm Selection in the Face of Data-Drift in
Optimisation Problem Instances
type: conference
user_id: '15504'
year: '2025'
...
---
_id: '64658'
author:
- first_name: Moritz
full_name: Neukötter, Moritz
id: '45530'
last_name: Neukötter
orcid: 0000-0001-9101-8828
- first_name: Steffen
full_name: Jesinghausen, Steffen
id: '3959'
last_name: Jesinghausen
orcid: https://orcid.org/0000-0003-2611-5298
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
orcid: 000-0001-8590-1921
citation:
ama: 'Neukötter M, Jesinghausen S, Schmid H-J. Die Möglichkeiten der Filament Extension
Atomization . In: ; 2025.'
apa: Neukötter, M., Jesinghausen, S., & Schmid, H.-J. (2025). Die Möglichkeiten
der Filament Extension Atomization . Jahrestreffen DECHEMA/VDI-Fachgruppe
Mehrphasenströmung, Hamburg.
bibtex: '@inproceedings{Neukötter_Jesinghausen_Schmid_2025, title={Die Möglichkeiten
der Filament Extension Atomization }, author={Neukötter, Moritz and Jesinghausen,
Steffen and Schmid, Hans-Joachim}, year={2025} }'
chicago: Neukötter, Moritz, Steffen Jesinghausen, and Hans-Joachim Schmid. “Die
Möglichkeiten Der Filament Extension Atomization ,” 2025.
ieee: M. Neukötter, S. Jesinghausen, and H.-J. Schmid, “Die Möglichkeiten der Filament
Extension Atomization ,” presented at the Jahrestreffen DECHEMA/VDI-Fachgruppe
Mehrphasenströmung, Hamburg, 2025.
mla: Neukötter, Moritz, et al. Die Möglichkeiten Der Filament Extension Atomization
. 2025.
short: 'M. Neukötter, S. Jesinghausen, H.-J. Schmid, in: 2025.'
conference:
end_date: 2025-03-21
location: Hamburg
name: Jahrestreffen DECHEMA/VDI-Fachgruppe Mehrphasenströmung
start_date: 2025-03-19
date_created: 2026-02-26T09:00:10Z
date_updated: 2026-02-26T09:05:06Z
department:
- _id: '9'
- _id: '150'
language:
- iso: eng
status: public
title: 'Die Möglichkeiten der Filament Extension Atomization '
type: conference_abstract
user_id: '45530'
year: '2025'
...
---
_id: '64659'
author:
- first_name: Moritz
full_name: Neukötter, Moritz
id: '45530'
last_name: Neukötter
orcid: 0000-0001-9101-8828
- first_name: Steffen
full_name: Jesinghausen, Steffen
id: '3959'
last_name: Jesinghausen
orcid: https://orcid.org/0000-0003-2611-5298
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
orcid: 000-0001-8590-1921
citation:
ama: 'Neukötter M, Jesinghausen S, Schmid H-J. Flow around Particles in Uniaxially
Elongated Capillary Bridges. In: ; 2025.'
apa: Neukötter, M., Jesinghausen, S., & Schmid, H.-J. (2025). Flow around
Particles in Uniaxially Elongated Capillary Bridges. DRG Symposium & Nordic
Rheology Conference, Berlin.
bibtex: '@inproceedings{Neukötter_Jesinghausen_Schmid_2025, title={Flow around Particles
in Uniaxially Elongated Capillary Bridges}, author={Neukötter, Moritz and Jesinghausen,
Steffen and Schmid, Hans-Joachim}, year={2025} }'
chicago: Neukötter, Moritz, Steffen Jesinghausen, and Hans-Joachim Schmid. “Flow
around Particles in Uniaxially Elongated Capillary Bridges,” 2025.
ieee: M. Neukötter, S. Jesinghausen, and H.-J. Schmid, “Flow around Particles in
Uniaxially Elongated Capillary Bridges,” presented at the DRG Symposium &
Nordic Rheology Conference, Berlin, 2025.
mla: Neukötter, Moritz, et al. Flow around Particles in Uniaxially Elongated
Capillary Bridges. 2025.
short: 'M. Neukötter, S. Jesinghausen, H.-J. Schmid, in: 2025.'
conference:
end_date: 2025-06-12
location: Berlin
name: DRG Symposium & Nordic Rheology Conference
start_date: 2025-06-10
date_created: 2026-02-26T09:03:07Z
date_updated: 2026-02-26T09:05:00Z
department:
- _id: '9'
- _id: '150'
language:
- iso: eng
status: public
title: Flow around Particles in Uniaxially Elongated Capillary Bridges
type: conference_abstract
user_id: '45530'
year: '2025'
...
---
_id: '64657'
author:
- first_name: 'Julian '
full_name: 'Neudorf, Julian '
last_name: Neudorf
- first_name: Moritz
full_name: Neukötter, Moritz
id: '45530'
last_name: Neukötter
orcid: 0000-0001-9101-8828
citation:
ama: Neudorf J, Neukötter M. Fließverhalten von unterschiedlichen Fluiden im
Filament Extension Atomizer.; 2025.
apa: Neudorf, J., & Neukötter, M. (2025). Fließverhalten von unterschiedlichen
Fluiden im Filament Extension Atomizer.
bibtex: '@book{Neudorf_Neukötter_2025, title={Fließverhalten von unterschiedlichen
Fluiden im Filament Extension Atomizer}, author={Neudorf, Julian and Neukötter,
Moritz}, year={2025} }'
chicago: Neudorf, Julian , and Moritz Neukötter. Fließverhalten von unterschiedlichen
Fluiden im Filament Extension Atomizer, 2025.
ieee: J. Neudorf and M. Neukötter, Fließverhalten von unterschiedlichen Fluiden
im Filament Extension Atomizer. 2025.
mla: Neudorf, Julian, and Moritz Neukötter. Fließverhalten von unterschiedlichen
Fluiden im Filament Extension Atomizer. 2025.
short: J. Neudorf, M. Neukötter, Fließverhalten von unterschiedlichen Fluiden im
Filament Extension Atomizer, 2025.
date_created: 2026-02-26T08:48:05Z
date_updated: 2026-02-26T08:48:33Z
department:
- _id: '9'
- _id: '150'
language:
- iso: ger
status: public
supervisor:
- first_name: Moritz
full_name: Neukötter, Moritz
id: '45530'
last_name: Neukötter
orcid: 0000-0001-9101-8828
- first_name: Steffen
full_name: Jesinghausen, Steffen
id: '3959'
last_name: Jesinghausen
orcid: https://orcid.org/0000-0003-2611-5298
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
orcid: 000-0001-8590-1921
title: Fließverhalten von unterschiedlichen Fluiden im Filament Extension Atomizer
type: bachelorsthesis
user_id: '45530'
year: '2025'
...