---
_id: '62079'
abstract:
- lang: eng
text: This paper investigates two modeling approaches for the simulation of the
deformation and decomposition behavior of preconsolidated rovings above the thermoplastic
matrix{\textquoteright} melting temperature. This is crucial for capturing the
local material structure after processes introducing highly localized deformation
such as mechanical joining processes between metal and fiber reinforced thermoplastics
(FRTP). A generic finite element (FE) model is developed, incorporating interfaces
discretized through either cohesive zone (CZ) elements or Coulomb friction-based
contacts. The material parameters for the FE elements are derived from the initial
stiffness of a statistical volume element (SVE) at micro scale modelled with an
Arbitrary-Lagrange-Eulerian method for three load cases. The CZ properties calculated
are based on the shear viscosity of the composite. The CZ and contact modelling
approaches are evaluated using three load cases of the SVE, comparing force-displacement
curves. Under simple loading conditions, such as normal pressure tension and bending,
both methods produce similar results; however, in complex load cases, the CZ approach
shows clear advantages in handling interface interactions and shows robust simulations.
The CZ approach thus presents a promising method for simulating roving decomposition
in FRTP-metal joining applications above the matrix{\textquoteright} melting temperature.
author:
- first_name: Benjamin
full_name: Gröger, Benjamin
last_name: Gröger
- first_name: Johannes
full_name: Gerritzen, Johannes
id: '105344'
last_name: Gerritzen
orcid: 0000-0002-0169-8602
- first_name: Andreas
full_name: Hornig, Andreas
last_name: Hornig
- first_name: Maik
full_name: Gude, Maik
last_name: Gude
citation:
ama: 'Gröger B, Gerritzen J, Hornig A, Gude M. Modeling approaches for the decomposition
behavior of preconsolidated rovings throughout local deformation processes. In:
Meschut G, Bobbert M, Duflou J, et al., eds. Sheet Metal 2025. Materials
Research Proceedings. Materials Research Forum LLC, Materials Research Foundations;
2025:268–275. doi:10.21741/9781644903551-33'
apa: Gröger, B., Gerritzen, J., Hornig, A., & Gude, M. (2025). Modeling approaches
for the decomposition behavior of preconsolidated rovings throughout local deformation
processes. In G. Meschut, M. Bobbert, J. Duflou, L. Fratini, H. Hagenah, P. Martins,
M. Merklein, & F. Micari (Eds.), Sheet Metal 2025 (pp. 268–275). Materials
Research Forum LLC, Materials Research Foundations. https://doi.org/10.21741/9781644903551-33
bibtex: '@inproceedings{Gröger_Gerritzen_Hornig_Gude_2025, series={Materials Research
Proceedings}, title={Modeling approaches for the decomposition behavior of preconsolidated
rovings throughout local deformation processes}, DOI={10.21741/9781644903551-33},
booktitle={Sheet Metal 2025}, publisher={Materials Research Forum LLC, Materials
Research Foundations}, author={Gröger, Benjamin and Gerritzen, Johannes and Hornig,
Andreas and Gude, Maik}, editor={Meschut, G. and Bobbert, M. and Duflou, J. and
Fratini, L. and Hagenah, H. and Martins, P. and Merklein, M. and Micari, F.},
year={2025}, pages={268–275}, collection={Materials Research Proceedings} }'
chicago: Gröger, Benjamin, Johannes Gerritzen, Andreas Hornig, and Maik Gude. “Modeling
Approaches for the Decomposition Behavior of Preconsolidated Rovings throughout
Local Deformation Processes.” In Sheet Metal 2025, edited by G. Meschut,
M. Bobbert, J. Duflou, L. Fratini, H. Hagenah, P. Martins, M. Merklein, and F.
Micari, 268–275. Materials Research Proceedings. Materials Research Forum LLC,
Materials Research Foundations, 2025. https://doi.org/10.21741/9781644903551-33.
ieee: 'B. Gröger, J. Gerritzen, A. Hornig, and M. Gude, “Modeling approaches for
the decomposition behavior of preconsolidated rovings throughout local deformation
processes,” in Sheet Metal 2025, 2025, pp. 268–275, doi: 10.21741/9781644903551-33.'
mla: Gröger, Benjamin, et al. “Modeling Approaches for the Decomposition Behavior
of Preconsolidated Rovings throughout Local Deformation Processes.” Sheet Metal
2025, edited by G. Meschut et al., Materials Research Forum LLC, Materials
Research Foundations, 2025, pp. 268–275, doi:10.21741/9781644903551-33.
short: 'B. Gröger, J. Gerritzen, A. Hornig, M. Gude, in: G. Meschut, M. Bobbert,
J. Duflou, L. Fratini, H. Hagenah, P. Martins, M. Merklein, F. Micari (Eds.),
Sheet Metal 2025, Materials Research Forum LLC, Materials Research Foundations,
2025, pp. 268–275.'
date_created: 2025-11-04T12:48:21Z
date_updated: 2026-02-27T06:43:19Z
doi: 10.21741/9781644903551-33
editor:
- first_name: G.
full_name: Meschut, G.
last_name: Meschut
- first_name: M.
full_name: Bobbert, M.
last_name: Bobbert
- first_name: J.
full_name: Duflou, J.
last_name: Duflou
- first_name: L.
full_name: Fratini, L.
last_name: Fratini
- first_name: H.
full_name: Hagenah, H.
last_name: Hagenah
- first_name: P.
full_name: Martins, P.
last_name: Martins
- first_name: M.
full_name: Merklein, M.
last_name: Merklein
- first_name: F.
full_name: Micari, F.
last_name: Micari
keyword:
- Finite Element Method (FEM)
- Process
- Thermoplastic Fiber Reinforced Plastic
language:
- iso: eng
page: 268–275
project:
- _id: '130'
name: 'TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen
Prozessketten'
- _id: '137'
name: TRR 285 - Subproject A03
- _id: '131'
name: TRR 285 - Project Area A
publication: Sheet Metal 2025
publication_identifier:
isbn:
- 978-1-64490-354-4
publisher: Materials Research Forum LLC, Materials Research Foundations
series_title: Materials Research Proceedings
status: public
title: Modeling approaches for the decomposition behavior of preconsolidated rovings
throughout local deformation processes
type: conference
user_id: '105344'
year: '2025'
...
---
_id: '62080'
abstract:
- lang: eng
text: The failure behavior of fiber reinforced polymers (FRP) is strongly influenced
by their microstructure, i.e. fiber arrangement or local fiber volume content.
However, this information cannot be directly used for structural analyses, since
it requires a discretization on micrometer level. Therefore, current failure theories
do not directly account for such effects, but describe the behavior averaged over
an entire specimen. This foundation in experimentally accessible loading conditions
leads to purely theory based extension to more complex stress states without direct
validation possibilities. This work aims at leveraging micro-scale simulations
to obtain failure information under arbitrary loading conditions. The results
are propagated to the meso-scale, enabling efficient structural analyses, by means
of machine learning (ML). It is shown that the ML model is capable of correctly
assessing previously unseen stress states and therefore poses an efficient tool
of exploiting information from the micro-scale in larger simulations.
author:
- first_name: Johannes
full_name: Gerritzen, Johannes
id: '105344'
last_name: Gerritzen
orcid: 0000-0002-0169-8602
- first_name: Andreas
full_name: Hornig, Andreas
last_name: Hornig
- first_name: Maik
full_name: Gude, Maik
last_name: Gude
citation:
ama: 'Gerritzen J, Hornig A, Gude M. Efficient failure information propagation under
complex stress states in fiber reinforced polymers: From micro- to meso-scale
using machine learning. In: Meschut G, Bobbert M, Duflou J, et al., eds. Sheet
Metal 2025. Materials Research Proceedings. Materials Research Forum LLC,
Materials Research Foundations; 2025:260–267. doi:10.21741/9781644903551-32'
apa: 'Gerritzen, J., Hornig, A., & Gude, M. (2025). Efficient failure information
propagation under complex stress states in fiber reinforced polymers: From micro-
to meso-scale using machine learning. In G. Meschut, M. Bobbert, J. Duflou, L.
Fratini, H. Hagenah, P. Martins, M. Merklein, & F. Micari (Eds.), Sheet
Metal 2025 (pp. 260–267). Materials Research Forum LLC, Materials Research
Foundations. https://doi.org/10.21741/9781644903551-32'
bibtex: '@inproceedings{Gerritzen_Hornig_Gude_2025, series={Materials Research Proceedings},
title={Efficient failure information propagation under complex stress states in
fiber reinforced polymers: From micro- to meso-scale using machine learning},
DOI={10.21741/9781644903551-32},
booktitle={Sheet Metal 2025}, publisher={Materials Research Forum LLC, Materials
Research Foundations}, author={Gerritzen, Johannes and Hornig, Andreas and Gude,
Maik}, editor={Meschut, G. and Bobbert, M. and Duflou, J. and Fratini, L. and
Hagenah, H. and Martins, P. and Merklein, M. and Micari, F.}, year={2025}, pages={260–267},
collection={Materials Research Proceedings} }'
chicago: 'Gerritzen, Johannes, Andreas Hornig, and Maik Gude. “Efficient Failure
Information Propagation under Complex Stress States in Fiber Reinforced Polymers:
From Micro- to Meso-Scale Using Machine Learning.” In Sheet Metal 2025,
edited by G. Meschut, M. Bobbert, J. Duflou, L. Fratini, H. Hagenah, P. Martins,
M. Merklein, and F. Micari, 260–267. Materials Research Proceedings. Materials
Research Forum LLC, Materials Research Foundations, 2025. https://doi.org/10.21741/9781644903551-32.'
ieee: 'J. Gerritzen, A. Hornig, and M. Gude, “Efficient failure information propagation
under complex stress states in fiber reinforced polymers: From micro- to meso-scale
using machine learning,” in Sheet Metal 2025, 2025, pp. 260–267, doi: 10.21741/9781644903551-32.'
mla: 'Gerritzen, Johannes, et al. “Efficient Failure Information Propagation under
Complex Stress States in Fiber Reinforced Polymers: From Micro- to Meso-Scale
Using Machine Learning.” Sheet Metal 2025, edited by G. Meschut et al.,
Materials Research Forum LLC, Materials Research Foundations, 2025, pp. 260–267,
doi:10.21741/9781644903551-32.'
short: 'J. Gerritzen, A. Hornig, M. Gude, in: G. Meschut, M. Bobbert, J. Duflou,
L. Fratini, H. Hagenah, P. Martins, M. Merklein, F. Micari (Eds.), Sheet Metal
2025, Materials Research Forum LLC, Materials Research Foundations, 2025, pp.
260–267.'
date_created: 2025-11-04T12:48:37Z
date_updated: 2026-02-27T06:43:37Z
doi: 10.21741/9781644903551-32
editor:
- first_name: G.
full_name: Meschut, G.
last_name: Meschut
- first_name: M.
full_name: Bobbert, M.
last_name: Bobbert
- first_name: J.
full_name: Duflou, J.
last_name: Duflou
- first_name: L.
full_name: Fratini, L.
last_name: Fratini
- first_name: H.
full_name: Hagenah, H.
last_name: Hagenah
- first_name: P.
full_name: Martins, P.
last_name: Martins
- first_name: M.
full_name: Merklein, M.
last_name: Merklein
- first_name: F.
full_name: Micari, F.
last_name: Micari
keyword:
- Failure
- Fiber Reinforced Plastic
- Machine Learning
language:
- iso: eng
page: 260–267
project:
- _id: '130'
name: 'TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen
Prozessketten'
- _id: '137'
name: TRR 285 - Subproject A03
- _id: '131'
name: TRR 285 - Project Area A
publication: Sheet Metal 2025
publication_identifier:
isbn:
- 978-1-64490-354-4
publisher: Materials Research Forum LLC, Materials Research Foundations
series_title: Materials Research Proceedings
status: public
title: 'Efficient failure information propagation under complex stress states in fiber
reinforced polymers: From micro- to meso-scale using machine learning'
type: conference
user_id: '105344'
year: '2025'
...
---
_id: '62081'
article_number: '114969'
author:
- first_name: Johannes
full_name: Gerritzen, Johannes
id: '105344'
last_name: Gerritzen
orcid: 0000-0002-0169-8602
- first_name: Benjamin
full_name: Gröger, Benjamin
last_name: Gröger
- first_name: Matthias
full_name: Zscheyge, Matthias
last_name: Zscheyge
- first_name: Andreas
full_name: Hornig, Andreas
last_name: Hornig
- first_name: Maik
full_name: Gude, Maik
last_name: Gude
citation:
ama: Gerritzen J, Gröger B, Zscheyge M, Hornig A, Gude M. 3D viscoelastic plastic
model coupled with a continuum damage formulation for fiber reinforced polymers.
Materials & Design. 2025;260. doi:10.1016/j.matdes.2025.114969
apa: Gerritzen, J., Gröger, B., Zscheyge, M., Hornig, A., & Gude, M. (2025).
3D viscoelastic plastic model coupled with a continuum damage formulation for
fiber reinforced polymers. Materials & Design, 260, Article
114969. https://doi.org/10.1016/j.matdes.2025.114969
bibtex: '@article{Gerritzen_Gröger_Zscheyge_Hornig_Gude_2025, title={3D viscoelastic
plastic model coupled with a continuum damage formulation for fiber reinforced
polymers}, volume={260}, DOI={10.1016/j.matdes.2025.114969},
number={114969}, journal={Materials & Design}, publisher={Elsevier BV},
author={Gerritzen, Johannes and Gröger, Benjamin and Zscheyge, Matthias and Hornig,
Andreas and Gude, Maik}, year={2025} }'
chicago: Gerritzen, Johannes, Benjamin Gröger, Matthias Zscheyge, Andreas Hornig,
and Maik Gude. “3D Viscoelastic Plastic Model Coupled with a Continuum Damage
Formulation for Fiber Reinforced Polymers.” Materials & Design
260 (2025). https://doi.org/10.1016/j.matdes.2025.114969.
ieee: 'J. Gerritzen, B. Gröger, M. Zscheyge, A. Hornig, and M. Gude, “3D viscoelastic
plastic model coupled with a continuum damage formulation for fiber reinforced
polymers,” Materials & Design, vol. 260, Art. no. 114969, 2025,
doi: 10.1016/j.matdes.2025.114969.'
mla: Gerritzen, Johannes, et al. “3D Viscoelastic Plastic Model Coupled with a Continuum
Damage Formulation for Fiber Reinforced Polymers.” Materials & Design,
vol. 260, 114969, Elsevier BV, 2025, doi:10.1016/j.matdes.2025.114969.
short: J. Gerritzen, B. Gröger, M. Zscheyge, A. Hornig, M. Gude, Materials &
Design 260 (2025).
date_created: 2025-11-04T12:49:13Z
date_updated: 2026-02-27T06:43:55Z
doi: 10.1016/j.matdes.2025.114969
intvolume: ' 260'
language:
- iso: eng
project:
- _id: '130'
name: 'TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen
Prozessketten'
- _id: '137'
name: TRR 285 - Subproject A03
- _id: '131'
name: TRR 285 - Project Area A
publication: Materials & Design
publication_identifier:
issn:
- 0264-1275
publication_status: published
publisher: Elsevier BV
status: public
title: 3D viscoelastic plastic model coupled with a continuum damage formulation for
fiber reinforced polymers
type: journal_article
user_id: '105344'
volume: 260
year: '2025'
...
---
_id: '64770'
author:
- first_name: Matthieu
full_name: Pinaud, Matthieu
last_name: Pinaud
citation:
ama: Pinaud M. Manifold of Mappings and Regularity Properties of Half-Lie Groups.;
2025. doi:10.17619/UNIPB/1-2211
apa: Pinaud, M. (2025). Manifold of mappings and regularity properties of half-Lie
groups. https://doi.org/10.17619/UNIPB/1-2211
bibtex: '@book{Pinaud_2025, title={Manifold of mappings and regularity properties
of half-Lie groups}, DOI={10.17619/UNIPB/1-2211},
author={Pinaud, Matthieu}, year={2025} }'
chicago: Pinaud, Matthieu. Manifold of Mappings and Regularity Properties of
Half-Lie Groups, 2025. https://doi.org/10.17619/UNIPB/1-2211.
ieee: M. Pinaud, Manifold of mappings and regularity properties of half-Lie groups.
2025.
mla: Pinaud, Matthieu. Manifold of Mappings and Regularity Properties of Half-Lie
Groups. 2025, doi:10.17619/UNIPB/1-2211.
short: M. Pinaud, Manifold of Mappings and Regularity Properties of Half-Lie Groups,
2025.
date_created: 2026-02-26T21:58:22Z
date_updated: 2026-02-26T21:58:36Z
department:
- _id: '10'
- _id: '87'
- _id: '93'
doi: 10.17619/UNIPB/1-2211
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://nbn-resolving.org/urn:nbn:de:hbz:466:2-54221
oa: '1'
status: public
supervisor:
- first_name: Helge
full_name: Glöckner, Helge
id: '178'
last_name: Glöckner
title: Manifold of mappings and regularity properties of half-Lie groups
type: dissertation
user_id: '178'
year: '2025'
...
---
_id: '61149'
abstract:
- lang: eng
text: The use of continuous fiber-reinforced thermoplastics (FRTP) in automotive
industry increases due to their excellent material properties and possibility
of rapid processing. The scale spanning heterogeneity of their material structure
and its influence on the material behavior, however, presents significant challenges
for most joining technologies, such as self-piercing riveting (SPR). During mechanical
joining, the material structure is significantly altered within and around the
joining zone, heavily influencing the material behavior. A comprehensive understanding
of the underlying phenomena of material alteration during the SPR process is essential
as basis for validating numerical simulations. This study examines the material
structure at ten stages of a step-setting test of SPR with two FRTP sheets with
glass-fiber reinforcement. Utilizing X-ray computed tomography (CT), the damage
phenomena within different areas of the setting test are analyzed three-dimensionally
and key parameters are quantified. Dominating phenomena during the penetration
of the rivet into the laminate are fiber failure (FF), interfiber failure (IFF)
and fiber bending, while delamination, fiber kinking and roving splitting are
also observed. At the final stages, the bottom layers of the second sheet collapse
and form a bulge into the cavity of the die.
author:
- first_name: Alrik
full_name: Dargel, Alrik
id: '114764'
last_name: Dargel
- first_name: Benjamin
full_name: Gröger, Benjamin
last_name: Gröger
- first_name: Malte Christian
full_name: Schlichter, Malte Christian
id: '61977'
last_name: Schlichter
- first_name: Johannes
full_name: Gerritzen, Johannes
id: '105344'
last_name: Gerritzen
orcid: 0000-0002-0169-8602
- first_name: Daniel
full_name: Köhler, Daniel
id: '83408'
last_name: Köhler
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Maik
full_name: Gude, Maik
last_name: Gude
- first_name: Robert
full_name: Kupfer, Robert
last_name: Kupfer
citation:
ama: 'Dargel A, Gröger B, Schlichter MC, et al. LOCAL DEFORMATION AND FAILURE OF
COMPOSITES DURING SELF-PIERCING RIVETING: A CT BASED MICROSTRUCTURE INVESTIGATION.
In: Gomes JFS, Meguid SA, eds. Proceedings of the 8th International Conference
on Integrity-Reliability-Failure (IRF2025). FEUP; 2025. doi:10.24840/978-972-752-323-8'
apa: 'Dargel, A., Gröger, B., Schlichter, M. C., Gerritzen, J., Köhler, D., Meschut,
G., Gude, M., & Kupfer, R. (2025). LOCAL DEFORMATION AND FAILURE OF COMPOSITES
DURING SELF-PIERCING RIVETING: A CT BASED MICROSTRUCTURE INVESTIGATION. In J.
F. S. Gomes & S. A. Meguid (Eds.), Proceedings of the 8th International
Conference on Integrity-Reliability-Failure (IRF2025). FEUP. https://doi.org/10.24840/978-972-752-323-8'
bibtex: '@inproceedings{Dargel_Gröger_Schlichter_Gerritzen_Köhler_Meschut_Gude_Kupfer_2025,
place={Porto}, title={LOCAL DEFORMATION AND FAILURE OF COMPOSITES DURING SELF-PIERCING
RIVETING: A CT BASED MICROSTRUCTURE INVESTIGATION}, DOI={10.24840/978-972-752-323-8},
booktitle={Proceedings of the 8th International Conference on Integrity-Reliability-Failure
(IRF2025)}, publisher={FEUP}, author={Dargel, Alrik and Gröger, Benjamin and Schlichter,
Malte Christian and Gerritzen, Johannes and Köhler, Daniel and Meschut, Gerson
and Gude, Maik and Kupfer, Robert}, editor={Gomes, J.F. Silva and Meguid, Shaker
A.}, year={2025} }'
chicago: 'Dargel, Alrik, Benjamin Gröger, Malte Christian Schlichter, Johannes Gerritzen,
Daniel Köhler, Gerson Meschut, Maik Gude, and Robert Kupfer. “LOCAL DEFORMATION
AND FAILURE OF COMPOSITES DURING SELF-PIERCING RIVETING: A CT BASED MICROSTRUCTURE
INVESTIGATION.” In Proceedings of the 8th International Conference on Integrity-Reliability-Failure
(IRF2025), edited by J.F. Silva Gomes and Shaker A. Meguid. Porto: FEUP, 2025.
https://doi.org/10.24840/978-972-752-323-8.'
ieee: 'A. Dargel et al., “LOCAL DEFORMATION AND FAILURE OF COMPOSITES DURING
SELF-PIERCING RIVETING: A CT BASED MICROSTRUCTURE INVESTIGATION,” in Proceedings
of the 8th International Conference on Integrity-Reliability-Failure (IRF2025),
Porto, 2025, doi: 10.24840/978-972-752-323-8.'
mla: 'Dargel, Alrik, et al. “LOCAL DEFORMATION AND FAILURE OF COMPOSITES DURING
SELF-PIERCING RIVETING: A CT BASED MICROSTRUCTURE INVESTIGATION.” Proceedings
of the 8th International Conference on Integrity-Reliability-Failure (IRF2025),
edited by J.F. Silva Gomes and Shaker A. Meguid, FEUP, 2025, doi:10.24840/978-972-752-323-8.'
short: 'A. Dargel, B. Gröger, M.C. Schlichter, J. Gerritzen, D. Köhler, G. Meschut,
M. Gude, R. Kupfer, in: J.F.S. Gomes, S.A. Meguid (Eds.), Proceedings of the 8th
International Conference on Integrity-Reliability-Failure (IRF2025), FEUP, Porto,
2025.'
conference:
end_date: 2025-07-18
location: Porto
name: 8th International Conference on Integrity-Reliability-Failure (IRF2025)
start_date: 2025-07-15
date_created: 2025-09-08T11:52:45Z
date_updated: 2026-02-27T06:45:17Z
doi: 10.24840/978-972-752-323-8
editor:
- first_name: J.F. Silva
full_name: Gomes, J.F. Silva
last_name: Gomes
- first_name: Shaker A.
full_name: Meguid, Shaker A.
last_name: Meguid
keyword:
- self-piercing riveting
- computed tomography
- thermoplastic composites
- process-structure-interaction
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.researchgate.net/publication/395593556_LOCAL_DEFORMATION_AND_FAILURE_OF_COMPOSITES_DURING_SELF-PIERCING_RIVETING_A_CT_BASED_MICROSTRUCTURE_INVESTIGATION
oa: '1'
place: Porto
project:
- _id: '133'
name: TRR 285 - Project Area C
- _id: '148'
name: TRR 285 - Subproject C04
- _id: '130'
name: 'TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen
Prozessketten'
- _id: '131'
name: TRR 285 - Project Area A
- _id: '137'
name: TRR 285 - Subproject A03
- _id: '135'
name: TRR 285 - Subproject A01
publication: Proceedings of the 8th International Conference on Integrity-Reliability-Failure
(IRF2025)
publication_identifier:
isbn:
- '9789727523238'
publication_status: published
publisher: FEUP
status: public
title: 'LOCAL DEFORMATION AND FAILURE OF COMPOSITES DURING SELF-PIERCING RIVETING:
A CT BASED MICROSTRUCTURE INVESTIGATION'
type: conference
user_id: '105344'
year: '2025'
...
---
_id: '63828'
article_number: '100368'
author:
- first_name: Johannes
full_name: Gerritzen, Johannes
id: '105344'
last_name: Gerritzen
orcid: 0000-0002-0169-8602
- first_name: Kunal
full_name: Chopra, Kunal
last_name: Chopra
- first_name: Gregor
full_name: Reschke, Gregor
id: '98812'
last_name: Reschke
- first_name: Andreas
full_name: Hornig, Andreas
last_name: Hornig
- first_name: Alexander
full_name: Brosius, Alexander
last_name: Brosius
- first_name: Maik
full_name: Gude, Maik
last_name: Gude
citation:
ama: Gerritzen J, Chopra K, Reschke G, Hornig A, Brosius A, Gude M. Quality assurance
of clinched joints using explainable machine learning. Journal of Advanced
Joining Processes. 2025;13. doi:10.1016/j.jajp.2025.100368
apa: Gerritzen, J., Chopra, K., Reschke, G., Hornig, A., Brosius, A., & Gude,
M. (2025). Quality assurance of clinched joints using explainable machine learning.
Journal of Advanced Joining Processes, 13, Article 100368. https://doi.org/10.1016/j.jajp.2025.100368
bibtex: '@article{Gerritzen_Chopra_Reschke_Hornig_Brosius_Gude_2025, title={Quality
assurance of clinched joints using explainable machine learning}, volume={13},
DOI={10.1016/j.jajp.2025.100368},
number={100368}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier
BV}, author={Gerritzen, Johannes and Chopra, Kunal and Reschke, Gregor and Hornig,
Andreas and Brosius, Alexander and Gude, Maik}, year={2025} }'
chicago: Gerritzen, Johannes, Kunal Chopra, Gregor Reschke, Andreas Hornig, Alexander
Brosius, and Maik Gude. “Quality Assurance of Clinched Joints Using Explainable
Machine Learning.” Journal of Advanced Joining Processes 13 (2025). https://doi.org/10.1016/j.jajp.2025.100368.
ieee: 'J. Gerritzen, K. Chopra, G. Reschke, A. Hornig, A. Brosius, and M. Gude,
“Quality assurance of clinched joints using explainable machine learning,” Journal
of Advanced Joining Processes, vol. 13, Art. no. 100368, 2025, doi: 10.1016/j.jajp.2025.100368.'
mla: Gerritzen, Johannes, et al. “Quality Assurance of Clinched Joints Using Explainable
Machine Learning.” Journal of Advanced Joining Processes, vol. 13, 100368,
Elsevier BV, 2025, doi:10.1016/j.jajp.2025.100368.
short: J. Gerritzen, K. Chopra, G. Reschke, A. Hornig, A. Brosius, M. Gude, Journal
of Advanced Joining Processes 13 (2025).
date_created: 2026-02-02T08:32:04Z
date_updated: 2026-02-27T06:45:47Z
doi: 10.1016/j.jajp.2025.100368
intvolume: ' 13'
language:
- iso: eng
project:
- _id: '137'
name: TRR 285 - Subproject A03
- _id: '131'
name: TRR 285 - Project Area A
- _id: '130'
name: 'TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen
Prozessketten'
- _id: '133'
name: TRR 285 - Project Area C
- _id: '148'
name: TRR 285 - Subproject C04
publication: Journal of Advanced Joining Processes
publication_identifier:
issn:
- 2666-3309
publication_status: published
publisher: Elsevier BV
status: public
title: Quality assurance of clinched joints using explainable machine learning
type: journal_article
user_id: '105344'
volume: 13
year: '2025'
...
---
_id: '59441'
abstract:
- lang: eng
text: 'Abstract. Accurate Finite Element Modeling (FEM) of joints is essential
in the design of complex mechanical systems such as automotive body-in-white (BIW)
structures, as it plays a critical role in evaluating their performance. Although
well-established techniques exist for modeling rotationally symmetric joints,
there remains a significant gap in effectively modeling non-rotationally symmetric
joints. These joints are particularly relevant in the automotive BIW, where they
can better accommodate anisotropic loading conditions. In this study, strategies
for modeling non-rotationally symmetric joints were explored using finite element
simulations in LS-DYNA. The findings demonstrate that discrete beam elements can
capture the anisotropic characteristics of such joints. Two models were tested:
a single-beam model for stiffness periodicity every 90°, and a three-beam model
for stiffness periodicity every 120°. Force responses, stress distribution, and
sheet bending behaviors were analyzed, confirming that discrete beam elements
can accurately represent direction-dependent stiffness. These results establish
a foundation for developing advanced joint modeling strategies in complex mechanical
systems.'
author:
- first_name: Deekshith Reddy
full_name: Devulapally, Deekshith Reddy
id: '76837'
last_name: Devulapally
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Devulapally DR, Tröster T. Modelling strategies for non-rotationally symmetric
joints. In: Materials Research Proceedings. Vol 52. Materials Research
Forum LLC; 2025. doi:10.21741/9781644903551-21'
apa: Devulapally, D. R., & Tröster, T. (2025). Modelling strategies for non-rotationally
symmetric joints. Materials Research Proceedings, 52. https://doi.org/10.21741/9781644903551-21
bibtex: '@inproceedings{Devulapally_Tröster_2025, title={Modelling strategies for
non-rotationally symmetric joints}, volume={52}, DOI={10.21741/9781644903551-21},
booktitle={Materials Research Proceedings}, publisher={Materials Research Forum
LLC}, author={Devulapally, Deekshith Reddy and Tröster, Thomas}, year={2025} }'
chicago: Devulapally, Deekshith Reddy, and Thomas Tröster. “Modelling Strategies
for Non-Rotationally Symmetric Joints.” In Materials Research Proceedings,
Vol. 52. Materials Research Forum LLC, 2025. https://doi.org/10.21741/9781644903551-21.
ieee: 'D. R. Devulapally and T. Tröster, “Modelling strategies for non-rotationally
symmetric joints,” in Materials Research Proceedings, Paderborn, 2025,
vol. 52, doi: 10.21741/9781644903551-21.'
mla: Devulapally, Deekshith Reddy, and Thomas Tröster. “Modelling Strategies for
Non-Rotationally Symmetric Joints.” Materials Research Proceedings, vol.
52, Materials Research Forum LLC, 2025, doi:10.21741/9781644903551-21.
short: 'D.R. Devulapally, T. Tröster, in: Materials Research Proceedings, Materials
Research Forum LLC, 2025.'
conference:
end_date: 2025-04-03
location: Paderborn
name: '21st International conference on sheet metal '
start_date: 2025-04-01
date_created: 2025-04-08T14:57:51Z
date_updated: 2026-02-27T10:50:10Z
department:
- _id: '149'
- _id: '9'
- _id: '321'
doi: 10.21741/9781644903551-21
intvolume: ' 52'
language:
- iso: eng
project:
- _id: '140'
name: 'TRR 285 – B01: TRR 285 - Subproject B01'
- _id: '52'
name: 'PC2: Computing Resources Provided by the Paderborn Center for Parallel Computing'
- _id: '130'
name: 'TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen
Prozessketten'
publication: Materials Research Proceedings
publication_identifier:
issn:
- 2474-395X
publication_status: published
publisher: Materials Research Forum LLC
status: public
title: Modelling strategies for non-rotationally symmetric joints
type: conference
user_id: '76837'
volume: 52
year: '2025'
...
---
_id: '62041'
author:
- first_name: Eileen
full_name: Reckmann, Eileen
id: '101166'
last_name: Reckmann
- first_name: Katrin
full_name: Temmen, Katrin
id: '30086'
last_name: Temmen
citation:
ama: 'Reckmann E, Temmen K. Intrinsic Motivation in Stem Outreach: An Analysis of
External Factors in Voluntary and School-Based Lab Settings. In: Gómez Chova L,
González Martínez C, Lees J, eds. EDULEARN Proceedings. Vol 1. IATED; 2025.
doi:10.21125/edulearn.2025.2462'
apa: 'Reckmann, E., & Temmen, K. (2025). Intrinsic Motivation in Stem Outreach:
An Analysis of External Factors in Voluntary and School-Based Lab Settings. In
L. Gómez Chova, C. González Martínez, & J. Lees (Eds.), EDULEARN Proceedings
(Vol. 1). IATED. https://doi.org/10.21125/edulearn.2025.2462'
bibtex: '@inproceedings{Reckmann_Temmen_2025, title={Intrinsic Motivation in Stem
Outreach: An Analysis of External Factors in Voluntary and School-Based Lab Settings},
volume={1}, DOI={10.21125/edulearn.2025.2462},
booktitle={EDULEARN Proceedings}, publisher={IATED}, author={Reckmann, Eileen
and Temmen, Katrin}, editor={Gómez Chova, Luis and González Martínez, Chelo and
Lees, Joanna}, year={2025} }'
chicago: 'Reckmann, Eileen, and Katrin Temmen. “Intrinsic Motivation in Stem Outreach:
An Analysis of External Factors in Voluntary and School-Based Lab Settings.” In
EDULEARN Proceedings, edited by Luis Gómez Chova, Chelo González Martínez,
and Joanna Lees, Vol. 1. IATED, 2025. https://doi.org/10.21125/edulearn.2025.2462.'
ieee: 'E. Reckmann and K. Temmen, “Intrinsic Motivation in Stem Outreach: An Analysis
of External Factors in Voluntary and School-Based Lab Settings,” in EDULEARN
Proceedings, 2025, vol. 1, doi: 10.21125/edulearn.2025.2462.'
mla: 'Reckmann, Eileen, and Katrin Temmen. “Intrinsic Motivation in Stem Outreach:
An Analysis of External Factors in Voluntary and School-Based Lab Settings.” EDULEARN
Proceedings, edited by Luis Gómez Chova et al., vol. 1, IATED, 2025, doi:10.21125/edulearn.2025.2462.'
short: 'E. Reckmann, K. Temmen, in: L. Gómez Chova, C. González Martínez, J. Lees
(Eds.), EDULEARN Proceedings, IATED, 2025.'
date_created: 2025-11-03T09:25:42Z
date_updated: 2026-02-27T11:17:10Z
department:
- _id: '300'
doi: 10.21125/edulearn.2025.2462
editor:
- first_name: 'Luis '
full_name: 'Gómez Chova, Luis '
last_name: Gómez Chova
- first_name: Chelo
full_name: González Martínez, Chelo
last_name: González Martínez
- first_name: Joanna
full_name: Lees, Joanna
last_name: Lees
intvolume: ' 1'
language:
- iso: eng
publication: EDULEARN Proceedings
publication_identifier:
issn:
- 2340-1117
publication_status: published
publisher: IATED
status: public
title: 'Intrinsic Motivation in Stem Outreach: An Analysis of External Factors in
Voluntary and School-Based Lab Settings'
type: conference
user_id: '101166'
volume: 1
year: '2025'
...
---
_id: '64786'
author:
- first_name: Laura
full_name: Müller, Laura
id: '44605'
last_name: Müller
- first_name: Niclas
full_name: Meihöfener, Niclas
id: '38611'
last_name: Meihöfener
- first_name: Johannes Gabriel
full_name: Siemoneit, Johannes Gabriel
id: '98462'
last_name: Siemoneit
orcid: 0000-0002-2543-2331
- first_name: Iryna
full_name: Mozgova, Iryna
id: '95903'
last_name: Mozgova
citation:
ama: 'Müller L, Meihöfener N, Siemoneit JG, Mozgova I. Introduction of electronic
lab notebooks in engineering education - opportunities for a cultural change.
In: Engineering Education for Sustainable Development (EESD2025). ; 2025.
doi:https://doi.org/10.71779/776'
apa: Müller, L., Meihöfener, N., Siemoneit, J. G., & Mozgova, I. (2025). Introduction
of electronic lab notebooks in engineering education - opportunities for a cultural
change. Engineering Education for Sustainable Development (EESD2025). https://doi.org/10.71779/776
bibtex: '@inproceedings{Müller_Meihöfener_Siemoneit_Mozgova_2025, title={Introduction
of electronic lab notebooks in engineering education - opportunities for a cultural
change}, DOI={https://doi.org/10.71779/776},
booktitle={Engineering Education for Sustainable Development (EESD2025)}, author={Müller,
Laura and Meihöfener, Niclas and Siemoneit, Johannes Gabriel and Mozgova, Iryna},
year={2025} }'
chicago: Müller, Laura, Niclas Meihöfener, Johannes Gabriel Siemoneit, and Iryna
Mozgova. “Introduction of Electronic Lab Notebooks in Engineering Education -
Opportunities for a Cultural Change.” In Engineering Education for Sustainable
Development (EESD2025), 2025. https://doi.org/10.71779/776.
ieee: 'L. Müller, N. Meihöfener, J. G. Siemoneit, and I. Mozgova, “Introduction
of electronic lab notebooks in engineering education - opportunities for a cultural
change,” 2025, doi: https://doi.org/10.71779/776.'
mla: Müller, Laura, et al. “Introduction of Electronic Lab Notebooks in Engineering
Education - Opportunities for a Cultural Change.” Engineering Education for
Sustainable Development (EESD2025), 2025, doi:https://doi.org/10.71779/776.
short: 'L. Müller, N. Meihöfener, J.G. Siemoneit, I. Mozgova, in: Engineering Education
for Sustainable Development (EESD2025), 2025.'
date_created: 2026-02-27T14:24:40Z
date_updated: 2026-02-27T14:27:09Z
department:
- _id: '741'
doi: https://doi.org/10.71779/776
language:
- iso: eng
publication: Engineering Education for Sustainable Development (EESD2025)
quality_controlled: '1'
status: public
title: Introduction of electronic lab notebooks in engineering education - opportunities
for a cultural change
type: conference
user_id: '44605'
year: '2025'
...
---
_id: '64781'
author:
- first_name: Felix
full_name: Rossmann, Felix
id: '98531'
last_name: Rossmann
- first_name: Jan
full_name: Greitens, Jan
last_name: Greitens
- first_name: Lisa
full_name: Knoll, Lisa
id: '88789'
last_name: Knoll
citation:
ama: 'Rossmann F, Greitens J, Knoll L. SMEs within a Data-Driven Sustainable
Finance Framework: A European Survey.; 2025. doi:http://dx.doi.org/10.2139/ssrn.5677922'
apa: 'Rossmann, F., Greitens, J., & Knoll, L. (2025). SMEs within a Data-Driven
Sustainable Finance Framework: A European Survey. http://dx.doi.org/10.2139/ssrn.5677922'
bibtex: '@book{Rossmann_Greitens_Knoll_2025, series={CFS WP No 735}, title={SMEs
within a Data-Driven Sustainable Finance Framework: A European Survey}, DOI={http://dx.doi.org/10.2139/ssrn.5677922},
author={Rossmann, Felix and Greitens, Jan and Knoll, Lisa}, year={2025}, collection={CFS
WP No 735} }'
chicago: 'Rossmann, Felix, Jan Greitens, and Lisa Knoll. SMEs within a Data-Driven
Sustainable Finance Framework: A European Survey. CFS WP No 735, 2025. http://dx.doi.org/10.2139/ssrn.5677922.'
ieee: 'F. Rossmann, J. Greitens, and L. Knoll, SMEs within a Data-Driven Sustainable
Finance Framework: A European Survey. 2025.'
mla: 'Rossmann, Felix, et al. SMEs within a Data-Driven Sustainable Finance Framework:
A European Survey. 2025, doi:http://dx.doi.org/10.2139/ssrn.5677922.'
short: 'F. Rossmann, J. Greitens, L. Knoll, SMEs within a Data-Driven Sustainable
Finance Framework: A European Survey, 2025.'
date_created: 2026-02-27T11:08:53Z
date_updated: 2026-02-27T11:09:07Z
department:
- _id: '36'
- _id: '121'
doi: http://dx.doi.org/10.2139/ssrn.5677922
language:
- iso: eng
publication_status: published
series_title: CFS WP No 735
status: public
title: 'SMEs within a Data-Driven Sustainable Finance Framework: A European Survey'
type: working_paper
user_id: '88789'
year: '2025'
...
---
_id: '64664'
author:
- first_name: Eileen
full_name: Reckmann, Eileen
id: '101166'
last_name: Reckmann
- first_name: Katrin
full_name: Temmen, Katrin
id: '30086'
last_name: Temmen
citation:
ama: 'Reckmann E, Temmen K. Technik im Fokus: Eine qualitative Analyse kindlicher
Themenwünsche in der non-formalen MINT-Bildung . In: ; 2025.'
apa: 'Reckmann, E., & Temmen, K. (2025). Technik im Fokus: Eine qualitative
Analyse kindlicher Themenwünsche in der non-formalen MINT-Bildung . 10. Technikdidaktiksymposium,
Schwäbisch Gmünd.'
bibtex: '@inproceedings{Reckmann_Temmen_2025, title={Technik im Fokus: Eine qualitative
Analyse kindlicher Themenwünsche in der non-formalen MINT-Bildung }, author={Reckmann,
Eileen and Temmen, Katrin}, year={2025} }'
chicago: 'Reckmann, Eileen, and Katrin Temmen. “Technik Im Fokus: Eine Qualitative
Analyse Kindlicher Themenwünsche in Der Non-Formalen MINT-Bildung ,” 2025.'
ieee: 'E. Reckmann and K. Temmen, “Technik im Fokus: Eine qualitative Analyse kindlicher
Themenwünsche in der non-formalen MINT-Bildung ,” presented at the 10. Technikdidaktiksymposium,
Schwäbisch Gmünd, 2025.'
mla: 'Reckmann, Eileen, and Katrin Temmen. Technik Im Fokus: Eine Qualitative
Analyse Kindlicher Themenwünsche in Der Non-Formalen MINT-Bildung . 2025.'
short: 'E. Reckmann, K. Temmen, in: 2025.'
conference:
end_date: 2025-10-10
location: Schwäbisch Gmünd
name: 10. Technikdidaktiksymposium
start_date: 2025-10-09
date_created: 2026-02-26T10:20:38Z
date_updated: 2026-02-27T11:16:54Z
language:
- iso: eng
status: public
title: 'Technik im Fokus: Eine qualitative Analyse kindlicher Themenwünsche in der
non-formalen MINT-Bildung '
type: conference_abstract
user_id: '101166'
year: '2025'
...
---
_id: '64787'
abstract:
- lang: eng
text: This study proposes a fault diagnostics methodology that addresses the challenges
posed by highly imbalanced datasets typical of railway applications, where faulty
conditions constitute the minority class. Fault diagnostics is performed from
the component level upward, considering each sensor’s proximity to its respective
critical component. Advanced signal analysis, feature engineering, and automated
data-driven model generation techniques were explored to achieve comprehensive
diagnostics, such that the model development process accounts for variations in
the operating conditions and differing levels of information availability. The
proposed methodology is evaluated on datasets from the MONOCAB, for scenarios
with limited faulty instances and on the Beijing 2024 IEEE PHM Conference data
challenge, which focused on fault diagnostics of railway systems under various
fault modes and operating conditions.
article_number: '1'
author:
- first_name: Osarenren Kennedy
full_name: Aimiyekagbon, Osarenren Kennedy
id: '9557'
last_name: Aimiyekagbon
- first_name: Alexander
full_name: Löwen, Alexander
id: '47233'
last_name: Löwen
- first_name: Raphael
full_name: Hanselle, Raphael
last_name: Hanselle
- first_name: Thomas
full_name: Rief, Thomas
last_name: Rief
- first_name: Maximilian
full_name: Beck, Maximilian
last_name: Beck
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
citation:
ama: 'Aimiyekagbon OK, Löwen A, Hanselle R, Rief T, Beck M, Sextro W. Multilevel
fault diagnostics for railway applications using limited historical data. In:
PHM Society Asia-Pacific Conference. Vol 5. ; 2025. doi:10.36001/phmap.2025.v5i1.4449'
apa: Aimiyekagbon, O. K., Löwen, A., Hanselle, R., Rief, T., Beck, M., & Sextro,
W. (2025). Multilevel fault diagnostics for railway applications using limited
historical data. PHM Society Asia-Pacific Conference, 5, Article
1. https://doi.org/10.36001/phmap.2025.v5i1.4449
bibtex: '@inproceedings{Aimiyekagbon_Löwen_Hanselle_Rief_Beck_Sextro_2025, title={Multilevel
fault diagnostics for railway applications using limited historical data}, volume={5},
DOI={10.36001/phmap.2025.v5i1.4449},
number={1}, booktitle={PHM Society Asia-Pacific Conference}, author={Aimiyekagbon,
Osarenren Kennedy and Löwen, Alexander and Hanselle, Raphael and Rief, Thomas
and Beck, Maximilian and Sextro, Walter}, year={2025} }'
chicago: Aimiyekagbon, Osarenren Kennedy, Alexander Löwen, Raphael Hanselle, Thomas
Rief, Maximilian Beck, and Walter Sextro. “Multilevel Fault Diagnostics for Railway
Applications Using Limited Historical Data.” In PHM Society Asia-Pacific Conference,
Vol. 5, 2025. https://doi.org/10.36001/phmap.2025.v5i1.4449.
ieee: 'O. K. Aimiyekagbon, A. Löwen, R. Hanselle, T. Rief, M. Beck, and W. Sextro,
“Multilevel fault diagnostics for railway applications using limited historical
data,” in PHM Society Asia-Pacific Conference, 2025, vol. 5, doi: 10.36001/phmap.2025.v5i1.4449.'
mla: Aimiyekagbon, Osarenren Kennedy, et al. “Multilevel Fault Diagnostics for Railway
Applications Using Limited Historical Data.” PHM Society Asia-Pacific Conference,
vol. 5, 1, 2025, doi:10.36001/phmap.2025.v5i1.4449.
short: 'O.K. Aimiyekagbon, A. Löwen, R. Hanselle, T. Rief, M. Beck, W. Sextro, in:
PHM Society Asia-Pacific Conference, 2025.'
date_created: 2026-02-27T20:41:54Z
date_updated: 2026-02-27T20:46:44Z
department:
- _id: '151'
doi: 10.36001/phmap.2025.v5i1.4449
intvolume: ' 5'
keyword:
- MONOCAB
- Beijing Data Challenge
- Diagnostics of railway systems
language:
- iso: eng
project:
- _id: '1355'
name: enableATO – Automatisierter Bahnverkehr als Backbone für eine nachhaltige,
vernetzte Mobilität im ländlichen Raum
publication: PHM Society Asia-Pacific Conference
publication_status: published
quality_controlled: '1'
status: public
title: Multilevel fault diagnostics for railway applications using limited historical
data
type: conference
user_id: '9557'
volume: 5
year: '2025'
...
---
_id: '64793'
abstract:
- lang: eng
text: The article explores the role of teachers in self-directed songwriting in
school music based on the informal learning approach. It investigates a didactic
design that was implemented in six schools and was empirically researched utilizing
si-tuational analysis. Based on tensions, that emerge due to conflicting expectations,
it can be shown, that the teacher's role extends beyond the dichotomy of directive
instruction versus open facilitation. Instead, it encompasses an interplay of
six divergent roles which are discussed in their positions in relation to each
other. These considerations enrich the understanding of teaching practices in
popular music education, emphasizing the redefinition of teacher-student relationships
for song-writing in school music.
author:
- first_name: Marc
full_name: Godau, Marc
id: '98877'
last_name: Godau
- first_name: Julia
full_name: Barreiro, Julia
last_name: Barreiro
- first_name: Katharina
full_name: Hermann, Katharina
last_name: Hermann
- first_name: Timo
full_name: Neuhausen, Timo
id: '99991'
last_name: Neuhausen
orcid: 0000-0002-8262-767X
- first_name: Dominik
full_name: Maxelon, Dominik
last_name: Maxelon
- first_name: Verena
full_name: Weidner, Verena
last_name: Weidner
citation:
ama: 'Godau M, Barreiro J, Hermann K, Neuhausen T, Maxelon D, Weidner V. “Wofür
bin ich denn hier, wenn ich nicht in irgendeiner Weise auch helfen kann?” Zur
Rolle der Lehrkraft beim selbstständigen Songwriting im Unterricht. In: Frey-Konrad
U, Hofbauer VC, Blanchard O, Bugiel L, eds. 46. Jahresband des Arbeitskreises
Musikpädagogische Forschung/46th Yearbook of the German Association for Research
in Music Education. Waxmann; 2025. doi:10.31244/9783818850715.13'
apa: Godau, M., Barreiro, J., Hermann, K., Neuhausen, T., Maxelon, D., & Weidner,
V. (2025). “Wofür bin ich denn hier, wenn ich nicht in irgendeiner Weise auch
helfen kann?” Zur Rolle der Lehrkraft beim selbstständigen Songwriting im Unterricht.
In U. Frey-Konrad, V. C. Hofbauer, O. Blanchard, & L. Bugiel (Eds.), 46.
Jahresband des Arbeitskreises Musikpädagogische Forschung/46th Yearbook of the
German Association for Research in Music Education. Waxmann. https://doi.org/10.31244/9783818850715.13
bibtex: '@inbook{Godau_Barreiro_Hermann_Neuhausen_Maxelon_Weidner_2025, title={“Wofür
bin ich denn hier, wenn ich nicht in irgendeiner Weise auch helfen kann?” Zur
Rolle der Lehrkraft beim selbstständigen Songwriting im Unterricht}, DOI={10.31244/9783818850715.13},
booktitle={46. Jahresband des Arbeitskreises Musikpädagogische Forschung/46th
Yearbook of the German Association for Research in Music Education}, publisher={Waxmann},
author={Godau, Marc and Barreiro, Julia and Hermann, Katharina and Neuhausen,
Timo and Maxelon, Dominik and Weidner, Verena}, editor={Frey-Konrad, Ute and Hofbauer,
Viola Cäcilia and Blanchard, Olivier and Bugiel, Lukas}, year={2025} }'
chicago: Godau, Marc, Julia Barreiro, Katharina Hermann, Timo Neuhausen, Dominik
Maxelon, and Verena Weidner. “‘Wofür bin ich denn hier, wenn ich nicht in irgendeiner
Weise auch helfen kann?’ Zur Rolle der Lehrkraft beim selbstständigen Songwriting
im Unterricht.” In 46. Jahresband des Arbeitskreises Musikpädagogische Forschung/46th
Yearbook of the German Association for Research in Music Education, edited
by Ute Frey-Konrad, Viola Cäcilia Hofbauer, Olivier Blanchard, and Lukas Bugiel.
Waxmann, 2025. https://doi.org/10.31244/9783818850715.13.
ieee: M. Godau, J. Barreiro, K. Hermann, T. Neuhausen, D. Maxelon, and V. Weidner,
“‘Wofür bin ich denn hier, wenn ich nicht in irgendeiner Weise auch helfen kann?’
Zur Rolle der Lehrkraft beim selbstständigen Songwriting im Unterricht,” in 46.
Jahresband des Arbeitskreises Musikpädagogische Forschung/46th Yearbook of the
German Association for Research in Music Education, U. Frey-Konrad, V. C.
Hofbauer, O. Blanchard, and L. Bugiel, Eds. Waxmann, 2025.
mla: Godau, Marc, et al. “‘Wofür bin ich denn hier, wenn ich nicht in irgendeiner
Weise auch helfen kann?’ Zur Rolle der Lehrkraft beim selbstständigen Songwriting
im Unterricht.” 46. Jahresband des Arbeitskreises Musikpädagogische Forschung/46th
Yearbook of the German Association for Research in Music Education, edited
by Ute Frey-Konrad et al., Waxmann, 2025, doi:10.31244/9783818850715.13.
short: 'M. Godau, J. Barreiro, K. Hermann, T. Neuhausen, D. Maxelon, V. Weidner,
in: U. Frey-Konrad, V.C. Hofbauer, O. Blanchard, L. Bugiel (Eds.), 46. Jahresband
des Arbeitskreises Musikpädagogische Forschung/46th Yearbook of the German Association
for Research in Music Education, Waxmann, 2025.'
date_created: 2026-02-28T09:50:45Z
date_updated: 2026-02-28T15:29:25Z
department:
- _id: '131'
- _id: '36'
- _id: '129'
- _id: '540'
doi: 10.31244/9783818850715.13
editor:
- first_name: Ute
full_name: Frey-Konrad, Ute
last_name: Frey-Konrad
- first_name: Viola Cäcilia
full_name: Hofbauer, Viola Cäcilia
last_name: Hofbauer
- first_name: Olivier
full_name: Blanchard, Olivier
last_name: Blanchard
- first_name: Lukas
full_name: Bugiel, Lukas
last_name: Bugiel
language:
- iso: ger
main_file_link:
- open_access: '1'
oa: '1'
publication: 46. Jahresband des Arbeitskreises Musikpädagogische Forschung/46th Yearbook
of the German Association for Research in Music Education
publication_identifier:
isbn:
- '9783818800710'
publication_status: published
publisher: Waxmann
quality_controlled: '1'
status: public
title: '"Wofür bin ich denn hier, wenn ich nicht in irgendeiner Weise auch helfen
kann?" Zur Rolle der Lehrkraft beim selbstständigen Songwriting im Unterricht'
type: book_chapter
user_id: '99991'
year: '2025'
...
---
_id: '64792'
abstract:
- lang: eng
text: The role of institutionalized standards for the hybridization of musical practices.
On the socio-materiality of songwriting-producing in the bedroom studio This study
examines the socio-materiality of hybrid music practices in bedroom studios, focusing
on the interplay between traditional music education institutions and YouTube
education. A single case situational analysis reveals how standardized instrumental
and music production practices are combined to form a hybrid practice. It shows
that traditional music education institutions, such as music schools and conservatories,
specialize in the selection of chord tones, while You-Tube videos focus on sound
design. Using an actor-network theory approach, the study demonstrates the permeability
of informal and institutional learning spaces. The findings suggest that songwriting-producing
is not simply a sum of different practices, but rather a process of negotiation
and compromise between different standards and goals, as well as the distribution
of practice between humans and technology.
author:
- first_name: Timo
full_name: Neuhausen, Timo
id: '99991'
last_name: Neuhausen
orcid: 0000-0002-8262-767X
citation:
ama: 'Neuhausen T. Die Rolle institutionalisierter Standards für die Hybridisierung
musikalischer Praxen. Zur Soziomaterialität von Songwriting-Producing im Bedroom-Studio.
In: Frey-Konrad U, Hofbauer VC, Blanchard O, Bugiel L, eds. 46. Jahresband
Des Arbeitskreises Musikpädagogische Forschung/46th Yearbook of the German Association
for Research in Music Education. Waxmann; 2025. doi:10.31244/9783818850715.19'
apa: Neuhausen, T. (2025). Die Rolle institutionalisierter Standards für die Hybridisierung
musikalischer Praxen. Zur Soziomaterialität von Songwriting-Producing im Bedroom-Studio.
In U. Frey-Konrad, V. C. Hofbauer, O. Blanchard, & L. Bugiel (Eds.), 46.
Jahresband des Arbeitskreises Musikpädagogische Forschung/46th Yearbook of the
German Association for Research in Music Education. Waxmann. https://doi.org/10.31244/9783818850715.19
bibtex: '@inbook{Neuhausen_2025, title={Die Rolle institutionalisierter Standards
für die Hybridisierung musikalischer Praxen. Zur Soziomaterialität von Songwriting-Producing
im Bedroom-Studio}, DOI={10.31244/9783818850715.19},
booktitle={46. Jahresband des Arbeitskreises Musikpädagogische Forschung/46th
Yearbook of the German Association for Research in Music Education}, publisher={Waxmann},
author={Neuhausen, Timo}, editor={Frey-Konrad, Ute and Hofbauer, Viola Cäcilia
and Blanchard, Olivier and Bugiel, Lukas}, year={2025} }'
chicago: Neuhausen, Timo. “Die Rolle Institutionalisierter Standards Für Die Hybridisierung
Musikalischer Praxen. Zur Soziomaterialität von Songwriting-Producing Im Bedroom-Studio.”
In 46. Jahresband Des Arbeitskreises Musikpädagogische Forschung/46th Yearbook
of the German Association for Research in Music Education, edited by Ute Frey-Konrad,
Viola Cäcilia Hofbauer, Olivier Blanchard, and Lukas Bugiel. Waxmann, 2025. https://doi.org/10.31244/9783818850715.19.
ieee: T. Neuhausen, “Die Rolle institutionalisierter Standards für die Hybridisierung
musikalischer Praxen. Zur Soziomaterialität von Songwriting-Producing im Bedroom-Studio,”
in 46. Jahresband des Arbeitskreises Musikpädagogische Forschung/46th Yearbook
of the German Association for Research in Music Education, U. Frey-Konrad,
V. C. Hofbauer, O. Blanchard, and L. Bugiel, Eds. Waxmann, 2025.
mla: Neuhausen, Timo. “Die Rolle Institutionalisierter Standards Für Die Hybridisierung
Musikalischer Praxen. Zur Soziomaterialität von Songwriting-Producing Im Bedroom-Studio.”
46. Jahresband Des Arbeitskreises Musikpädagogische Forschung/46th Yearbook
of the German Association for Research in Music Education, edited by Ute Frey-Konrad
et al., Waxmann, 2025, doi:10.31244/9783818850715.19.
short: 'T. Neuhausen, in: U. Frey-Konrad, V.C. Hofbauer, O. Blanchard, L. Bugiel
(Eds.), 46. Jahresband Des Arbeitskreises Musikpädagogische Forschung/46th Yearbook
of the German Association for Research in Music Education, Waxmann, 2025.'
date_created: 2026-02-28T09:47:25Z
date_updated: 2026-02-28T15:28:48Z
department:
- _id: '131'
- _id: '36'
- _id: '129'
- _id: '540'
doi: 10.31244/9783818850715.19
editor:
- first_name: Ute
full_name: Frey-Konrad, Ute
last_name: Frey-Konrad
- first_name: Viola Cäcilia
full_name: Hofbauer, Viola Cäcilia
last_name: Hofbauer
- first_name: Olivier
full_name: Blanchard, Olivier
last_name: Blanchard
- first_name: Lukas
full_name: Bugiel, Lukas
last_name: Bugiel
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
publication: 46. Jahresband des Arbeitskreises Musikpädagogische Forschung/46th Yearbook
of the German Association for Research in Music Education
publication_identifier:
isbn:
- '9783818800710'
publication_status: published
publisher: Waxmann
quality_controlled: '1'
status: public
title: Die Rolle institutionalisierter Standards für die Hybridisierung musikalischer
Praxen. Zur Soziomaterialität von Songwriting-Producing im Bedroom-Studio
type: book_chapter
user_id: '99991'
year: '2025'
...
---
_id: '64795'
author:
- first_name: Marc
full_name: Ebert, Marc
id: '91897'
last_name: Ebert
- first_name: Katrin
full_name: Temmen, Katrin
id: '30086'
last_name: Temmen
citation:
ama: 'Ebert M, Temmen K. Über Rätsel zur Quantenphysik – Eine spielerische Heranführung
an ein abstraktes Thema. In: ; 2025.'
apa: Ebert, M., & Temmen, K. (2025). Über Rätsel zur Quantenphysik – Eine
spielerische Heranführung an ein abstraktes Thema. 20. LeLa-Jahrestagung,
Oldenburg.
bibtex: '@inproceedings{Ebert_Temmen_2025, title={Über Rätsel zur Quantenphysik
– Eine spielerische Heranführung an ein abstraktes Thema}, author={Ebert, Marc
and Temmen, Katrin}, year={2025} }'
chicago: Ebert, Marc, and Katrin Temmen. “Über Rätsel zur Quantenphysik – Eine spielerische
Heranführung an ein abstraktes Thema,” 2025.
ieee: M. Ebert and K. Temmen, “Über Rätsel zur Quantenphysik – Eine spielerische
Heranführung an ein abstraktes Thema,” presented at the 20. LeLa-Jahrestagung,
Oldenburg, 2025.
mla: Ebert, Marc, and Katrin Temmen. Über Rätsel zur Quantenphysik – Eine spielerische
Heranführung an ein abstraktes Thema. 2025.
short: 'M. Ebert, K. Temmen, in: 2025.'
conference:
end_date: 2025-03-11
location: Oldenburg
name: 20. LeLa-Jahrestagung
start_date: 2025-03-09
date_created: 2026-02-28T12:35:03Z
date_updated: 2026-02-28T12:55:30Z
department:
- _id: '300'
language:
- iso: ger
project:
- _id: '1393'
name: Heranführung der Generation Z an die Denkweise in der Quantenphysik (HedwiQ)
status: public
title: Über Rätsel zur Quantenphysik – Eine spielerische Heranführung an ein abstraktes
Thema
type: conference_abstract
user_id: '91897'
year: '2025'
...
---
_id: '64798'
abstract:
- lang: eng
text: "Lead-containing piezoelectric ceramics are still the base for today’s ultrasonic
transducers used in broad applications. This is partly due to missing powerful
lead-free piezoelectric ceramic parts in the commercial market. There has been
much research on lead-free materials but developing them into marketable parts
seems to be an ongoing process. The actual exemption of ROHS has expired, but
as the new exemption has already been requested, ceramic suppliers keep on selling
lead containing products. Nevertheless, these should be replaced by lead-free
alternatives for environmental and health issues. \r\nThis contribution focuses
on exploring the technological readiness level of lead-free hard piezoceramics
for prestressed ultrasonic transducers. A small series of bolted Langevin transducers
was set up with standard PZT material and three commercial lead-free variants.
Results of the building process from individual ring ceramic characteristics to
transducer load tests are presented. The main finding of this study is that the
lead-free materials technically can compete with the standard PZT for medium-power
applications. Some adaptations in the ultrasonic system must be done: the geometry
must be altered to fit resonance frequency, and higher voltages or thinner ceramics
are needed to achieve the same vibration level at low load. For reaching same
power, the volume of lead-free ceramics must be 1.5 to 3 times larger. As already
promoted in literature, mechanical losses at high vibration levels are smaller
for the lead-free materials. This might help to argument lead-free piezoelectric
materials in some applications.\r\n\r\nReferences\r\n1.\tDirective 2011/65/EU
of the European Parliament and of the Council of 8 June 2011 on the Restriction
of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment.
EUR-Lex Document 02011L0065-20240801. Available online: http://data.europa.eu/eli/dir/2011/65/2024-08-01
(accessed on 24 January 2025).\r\n2.\tLangevin, P. (1918) Method and Apparatus
for Transmitting and Receiving Submarine Elastic Waves Using the Piezoelectric
Properties of Quartz. French Patent Office; Patent No. FR505703.\r\n3.\tHemsel,
T.; Twiefel, J. (2023) Piezoelectric Ultrasonic Power Transducers. In Encyclopedia
of Materials: Electronics; Academic Press: Oxford, UK; pp. 276–285. https://doi.org/10.1016/b978-0-12-819728-8.00047-4.\r\n4.\tATHENA
Technologie Beratung GmbH (2025) Description of Ultrasound Generator. Available
online: http://shop.myathena.de/epages/12074748.sf/de_DE/?ObjectPath=/Shops/12074748/Products/AM200
(accessed on 13 January 2025).\r\n5.\tLittmann, W.; Hemsel, T.; Kauczor, C.; Wallaschek,
J.; Sinha, W. (2003) Load-adaptive phase-controller for resonant driven piezoelectric
devices. Proc. World Congr. Ultrason. 2003, 48, 547–550.\r\n6.\tScheidemann, C.,
Bornmann, P., Littmann, W., & Hemsel, T. (2025). Lead-Free Ceramics in Prestressed
Ultrasonic Transducers. Actuators, 14(2), 55. https://doi.org/10.3390/act14020055\r\n"
author:
- first_name: Claus
full_name: Scheidemann, Claus
id: '38259'
last_name: Scheidemann
- first_name: Peter
full_name: Bornmann, Peter
last_name: Bornmann
- first_name: Walter
full_name: Littmann, Walter
last_name: Littmann
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
citation:
ama: 'Scheidemann C, Bornmann P, Littmann W, Hemsel T. Bolted Langevin transducers
with leadfree piezoelectric ceramics. In: ; 2025.'
apa: Scheidemann, C., Bornmann, P., Littmann, W., & Hemsel, T. (2025). Bolted
Langevin transducers with leadfree piezoelectric ceramics. International Workshop
on Piezoelectric Materials and Applications in Actuators (IWPMA), Vilnius, Lithuania.
bibtex: '@inproceedings{Scheidemann_Bornmann_Littmann_Hemsel_2025, title={Bolted
Langevin transducers with leadfree piezoelectric ceramics}, author={Scheidemann,
Claus and Bornmann, Peter and Littmann, Walter and Hemsel, Tobias}, year={2025}
}'
chicago: Scheidemann, Claus, Peter Bornmann, Walter Littmann, and Tobias Hemsel.
“Bolted Langevin Transducers with Leadfree Piezoelectric Ceramics,” 2025.
ieee: C. Scheidemann, P. Bornmann, W. Littmann, and T. Hemsel, “Bolted Langevin
transducers with leadfree piezoelectric ceramics,” presented at the International
Workshop on Piezoelectric Materials and Applications in Actuators (IWPMA), Vilnius,
Lithuania, 2025.
mla: Scheidemann, Claus, et al. Bolted Langevin Transducers with Leadfree Piezoelectric
Ceramics. 2025.
short: 'C. Scheidemann, P. Bornmann, W. Littmann, T. Hemsel, in: 2025.'
conference:
end_date: 2025-07-03
location: Vilnius, Lithuania
name: International Workshop on Piezoelectric Materials and Applications in Actuators
(IWPMA)
start_date: 2025-07-01
date_created: 2026-03-02T10:39:40Z
date_updated: 2026-03-02T11:04:56Z
ddc:
- '620'
department:
- _id: '151'
file:
- access_level: open_access
content_type: application/pdf
creator: hemsel
date_created: 2026-03-02T10:37:46Z
date_updated: 2026-03-02T11:00:37Z
file_id: '64799'
file_name: IWPMA_2025_Hemsel.pdf
file_size: 1812289
relation: main_file
file_date_updated: 2026-03-02T11:00:37Z
has_accepted_license: '1'
keyword:
- lead free piezoelectric ceramics
- bolted Langevin transducer
- medium power ultrasound.
language:
- iso: eng
oa: '1'
status: public
title: Bolted Langevin transducers with leadfree piezoelectric ceramics
type: conference
user_id: '210'
year: '2025'
...
---
_id: '64800'
abstract:
- lang: eng
text: "Intensive ultrasonic cleaning of surfaces by means of a lead-free ultrasonic
transducer with focusing sonotrode\r\nUltrasonic cleaning baths are probably a
coincidental development: After underwater sonars had already been successfully
used to detect submarines before 1920, it was probably observed in this environment
that the ultrasonic oscillators not only showed a self-cleaning effect but also
cavitation damage. At the beginning of the 1950s, the first ultrasonic cleaning
devices finally came onto the market. Today, the range of applications ranges
from household appliances for jewellery and eyewear cleaning to classic cleaning
baths for metal parts and systems for cleaning highly sensitive electronic components.
There is a certain gap in handheld, mobile cleaning equipment. Although devices
for spot cleaning of textiles are known, the cleaning effect is usually low. \r\nDue
to the directive 2011/65/EU on the restriction of the use of hazardous substances
in electrical and electronic equipment (RoHS) [1] lead should no longer be used
in technical devices. As today’s standard ceramics for medium and high-power ultrasonic
transducers typically contain lead, there is a need to explore the use of lead-free
ceramics in this field. Honda [2] already offers a cleaning transducer based on
lead-free piezoelectric ceramics, but it is designed to be used in cleaning baths.\r\nThis
article presents the model-based development of a highly innovative ultrasonic
cleaner. On the one hand, lead-free piezoelectric ceramics are used, and on the
other hand, a special sonotrode has been developed that concentrates the sound
in such a way that a strong cavitation and thus cleaning effect is achieved with
comparatively low power in a short time. Coupled field finite element method was
used to find an appropriate geometry for the focussing sonotrode. The comparison
of simulation and measurement results shows that the lead-free piezoceramics used
do their job well and can keep up with standard ceramics, but more ceramic volume
is needed to achieve same power. An advanced control concept was elaborated to
ensure continuous hard cavitation at varying distances between the sonotrode and
the part to be cleaned. Cleaning results for different surfaces and contaminations
are presented. The concept of the focusing sonotrode shows that a convincing cleaning
result can be achieved even with low power and in short time, provided that the
oscillation system and control electronics are suitably coordinated.\r\n\r\nReferences\r\n[1]
http://data.europa.eu/eli/dir/2011/65/2024-08-01 \r\n[2] https://en.honda-el.co.jp/product/ceramics/lineup/lead_off/lead-off
\r\n"
author:
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
- first_name: Claus
full_name: Scheidemann, Claus
id: '38259'
last_name: Scheidemann
- first_name: Peter
full_name: Bornmann, Peter
last_name: Bornmann
- first_name: Walter
full_name: Littmann, Walter
last_name: Littmann
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
citation:
ama: 'Hemsel T, Scheidemann C, Bornmann P, Littmann W, Sextro W. Intensive ultrasonic
cleaning of surfaces by means of lead-free ultrasonic transducer with focussing
sonotrode. In: ; 2025.'
apa: Hemsel, T., Scheidemann, C., Bornmann, P., Littmann, W., & Sextro, W. (2025).
Intensive ultrasonic cleaning of surfaces by means of lead-free ultrasonic
transducer with focussing sonotrode. International Congress on Ultrasonics
(ICU), Paderborn, Germany.
bibtex: '@inproceedings{Hemsel_Scheidemann_Bornmann_Littmann_Sextro_2025, title={Intensive
ultrasonic cleaning of surfaces by means of lead-free ultrasonic transducer with
focussing sonotrode}, author={Hemsel, Tobias and Scheidemann, Claus and Bornmann,
Peter and Littmann, Walter and Sextro, Walter}, year={2025} }'
chicago: Hemsel, Tobias, Claus Scheidemann, Peter Bornmann, Walter Littmann, and
Walter Sextro. “Intensive Ultrasonic Cleaning of Surfaces by Means of Lead-Free
Ultrasonic Transducer with Focussing Sonotrode,” 2025.
ieee: T. Hemsel, C. Scheidemann, P. Bornmann, W. Littmann, and W. Sextro, “Intensive
ultrasonic cleaning of surfaces by means of lead-free ultrasonic transducer with
focussing sonotrode,” presented at the International Congress on Ultrasonics (ICU),
Paderborn, Germany, 2025.
mla: Hemsel, Tobias, et al. Intensive Ultrasonic Cleaning of Surfaces by Means
of Lead-Free Ultrasonic Transducer with Focussing Sonotrode. 2025.
short: 'T. Hemsel, C. Scheidemann, P. Bornmann, W. Littmann, W. Sextro, in: 2025.'
conference:
end_date: 2025-09-25
location: Paderborn, Germany
name: International Congress on Ultrasonics (ICU)
start_date: 2025-09-21
date_created: 2026-03-02T10:47:48Z
date_updated: 2026-03-02T10:58:37Z
ddc:
- '620'
department:
- _id: '151'
file:
- access_level: open_access
content_type: application/pdf
creator: hemsel
date_created: 2026-03-02T10:46:43Z
date_updated: 2026-03-02T10:58:37Z
file_id: '64801'
file_name: ICU_2025_Hemsel.pdf
file_size: 1946202
relation: main_file
file_date_updated: 2026-03-02T10:58:37Z
has_accepted_license: '1'
language:
- iso: eng
oa: '1'
status: public
title: Intensive ultrasonic cleaning of surfaces by means of lead-free ultrasonic
transducer with focussing sonotrode
type: conference
user_id: '210'
year: '2025'
...
---
_id: '61755'
author:
- first_name: Claus
full_name: Scheidemann, Claus
id: '38259'
last_name: Scheidemann
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
citation:
ama: 'Scheidemann C, Hemsel T, Sextro W. Time dependent material characteristics
of prestressed piezoelectric ceramics in langevin transducers. In: ; 2025.'
apa: Scheidemann, C., Hemsel, T., & Sextro, W. (2025). Time dependent material
characteristics of prestressed piezoelectric ceramics in langevin transducers.
22nd International Workshop on Piezoelectric Materials and Applications in Actuators
(IWPMA), Vilnius, Lithuania.
bibtex: '@inproceedings{Scheidemann_Hemsel_Sextro_2025, title={Time dependent material
characteristics of prestressed piezoelectric ceramics in langevin transducers},
author={Scheidemann, Claus and Hemsel, Tobias and Sextro, Walter}, year={2025}
}'
chicago: Scheidemann, Claus, Tobias Hemsel, and Walter Sextro. “Time Dependent Material
Characteristics of Prestressed Piezoelectric Ceramics in Langevin Transducers,”
2025.
ieee: C. Scheidemann, T. Hemsel, and W. Sextro, “Time dependent material characteristics
of prestressed piezoelectric ceramics in langevin transducers,” presented at the
22nd International Workshop on Piezoelectric Materials and Applications in Actuators
(IWPMA), Vilnius, Lithuania, 2025.
mla: Scheidemann, Claus, et al. Time Dependent Material Characteristics of Prestressed
Piezoelectric Ceramics in Langevin Transducers. 2025.
short: 'C. Scheidemann, T. Hemsel, W. Sextro, in: 2025.'
conference:
end_date: 2025-07-3
location: Vilnius, Lithuania
name: 22nd International Workshop on Piezoelectric Materials and Applications in
Actuators (IWPMA)
start_date: 2025-07-1
date_created: 2025-10-08T14:22:32Z
date_updated: 2026-03-02T10:59:53Z
ddc:
- '620'
department:
- _id: '151'
file:
- access_level: open_access
content_type: application/pdf
creator: hemsel
date_created: 2026-01-30T11:07:48Z
date_updated: 2026-03-02T10:59:53Z
file_id: '63817'
file_name: SHS25_IWPMA_2025.pdf
file_size: 644147
relation: main_file
file_date_updated: 2026-03-02T10:59:53Z
has_accepted_license: '1'
language:
- iso: eng
oa: '1'
project:
- _id: '245'
name: 'FOR 5208: Modellbasierte Bestimmung nichtlinearer Eigenschaften von Piezokeramiken
für Leistungsschallanwendungen (NEPTUN)'
status: public
title: Time dependent material characteristics of prestressed piezoelectric ceramics
in langevin transducers
type: conference
user_id: '210'
year: '2025'
...
---
_id: '61757'
author:
- first_name: Claus
full_name: Scheidemann, Claus
id: '38259'
last_name: Scheidemann
- first_name: Julius
full_name: Porzenheim, Julius
last_name: Porzenheim
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
citation:
ama: 'Scheidemann C, Porzenheim J, Hemsel T, Sextro W. Investigation of the Setting
Behaviour of Mechanically Biased Piezoelectric Ultrasonic Transducers. In: ; 2025.'
apa: Scheidemann, C., Porzenheim, J., Hemsel, T., & Sextro, W. (2025). Investigation
of the Setting Behaviour of Mechanically Biased Piezoelectric Ultrasonic Transducers.
2025 International Congress on Ultrasonics (ICU), Paderborn, Germany.
bibtex: '@inproceedings{Scheidemann_Porzenheim_Hemsel_Sextro_2025, title={Investigation
of the Setting Behaviour of Mechanically Biased Piezoelectric Ultrasonic Transducers},
author={Scheidemann, Claus and Porzenheim, Julius and Hemsel, Tobias and Sextro,
Walter}, year={2025} }'
chicago: Scheidemann, Claus, Julius Porzenheim, Tobias Hemsel, and Walter Sextro.
“Investigation of the Setting Behaviour of Mechanically Biased Piezoelectric Ultrasonic
Transducers,” 2025.
ieee: C. Scheidemann, J. Porzenheim, T. Hemsel, and W. Sextro, “Investigation of
the Setting Behaviour of Mechanically Biased Piezoelectric Ultrasonic Transducers,”
presented at the 2025 International Congress on Ultrasonics (ICU), Paderborn,
Germany, 2025.
mla: Scheidemann, Claus, et al. Investigation of the Setting Behaviour of Mechanically
Biased Piezoelectric Ultrasonic Transducers. 2025.
short: 'C. Scheidemann, J. Porzenheim, T. Hemsel, W. Sextro, in: 2025.'
conference:
end_date: 2025-09-25
location: Paderborn, Germany
name: 2025 International Congress on Ultrasonics (ICU)
start_date: 2025-09-21
date_created: 2025-10-08T14:33:44Z
date_updated: 2026-03-02T10:59:36Z
ddc:
- '620'
department:
- _id: '151'
file:
- access_level: open_access
content_type: application/pdf
creator: hemsel
date_created: 2026-01-30T07:30:44Z
date_updated: 2026-03-02T10:59:36Z
file_id: '63816'
file_name: Sch25_ICU_2025.pdf
file_size: 783790
relation: main_file
file_date_updated: 2026-03-02T10:59:36Z
has_accepted_license: '1'
language:
- iso: eng
oa: '1'
project:
- _id: '245'
name: 'FOR 5208: Modellbasierte Bestimmung nichtlinearer Eigenschaften von Piezokeramiken
für Leistungsschallanwendungen (NEPTUN)'
status: public
title: Investigation of the Setting Behaviour of Mechanically Biased Piezoelectric
Ultrasonic Transducers
type: conference
user_id: '210'
year: '2025'
...
---
_id: '57829'
abstract:
- lang: eng
text: 'Artificial intelligence (AI) is driving transformative changes across numerous
fields, revolutionizing conventional processes and creating new opportunities
for innovation. The development of mechatronic systems is undergoing a similar
transformation. Over the past decade, modeling, simulation, and optimization techniques
have become integral to the design process, paving the way for the adoption of
AI-based methods. In this paper, we examine the potential for integrating AI into
the engineering design process, using the V-model from the VDI guideline 2206,
considered the state-of-the-art in product design, as a foundation. We identify
and classify AI methods based on their suitability for specific stages within
the engineering product design workflow. Furthermore, we present a series of application
examples where AI-assisted design has been successfully implemented by the authors.
These examples, drawn from research projects within the DFG Priority Program \emph{SPP~2353:
Daring More Intelligence - Design Assistants in Mechanics and Dynamics}, showcase
a diverse range of applications across mechanics and mechatronics, including areas
such as acoustics and robotics.'
author:
- first_name: Kristin M.
full_name: de Payrebrune, Kristin M.
last_name: de Payrebrune
- first_name: Kathrin
full_name: Flaßkamp, Kathrin
last_name: Flaßkamp
- first_name: Tom
full_name: Ströhla, Tom
last_name: Ströhla
- first_name: Thomas
full_name: Sattel, Thomas
last_name: Sattel
- first_name: Dieter
full_name: Bestle, Dieter
last_name: Bestle
- first_name: Benedict
full_name: Röder, Benedict
last_name: Röder
- first_name: Peter
full_name: Eberhard, Peter
last_name: Eberhard
- first_name: Sebastian
full_name: Peitz, Sebastian
last_name: Peitz
- first_name: Marcus
full_name: Stoffel, Marcus
last_name: Stoffel
- first_name: Gulakala
full_name: Rutwik, Gulakala
last_name: Rutwik
- first_name: Borse
full_name: Aditya, Borse
last_name: Aditya
- first_name: Meike Claudia
full_name: Wohlleben, Meike Claudia
id: '43991'
last_name: Wohlleben
orcid: 0009-0009-9767-7168
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
- first_name: Maximilian
full_name: Raff, Maximilian
last_name: Raff
- first_name: C. David
full_name: Remy, C. David
last_name: Remy
- first_name: Manish
full_name: Yadav, Manish
last_name: Yadav
- first_name: Merten
full_name: Stender, Merten
last_name: Stender
- first_name: Jan
full_name: van Delden, Jan
last_name: van Delden
- first_name: Timo
full_name: Lüddecke, Timo
last_name: Lüddecke
- first_name: Sabine C.
full_name: Langer, Sabine C.
last_name: Langer
- first_name: Julius
full_name: Schultz, Julius
last_name: Schultz
- first_name: Christopher
full_name: Blech, Christopher
last_name: Blech
citation:
ama: de Payrebrune KM, Flaßkamp K, Ströhla T, et al. The impact of AI on engineering
design procedures for dynamical systems. Technische Mechanik - European Journal
of Engineering Mechanics. 2025;45(1):1-23. doi:10.24352/UB.OVGU-2025-037
apa: de Payrebrune, K. M., Flaßkamp, K., Ströhla, T., Sattel, T., Bestle, D., Röder,
B., Eberhard, P., Peitz, S., Stoffel, M., Rutwik, G., Aditya, B., Wohlleben, M.
C., Sextro, W., Raff, M., Remy, C. D., Yadav, M., Stender, M., van Delden, J.,
Lüddecke, T., … Blech, C. (2025). The impact of AI on engineering design procedures
for dynamical systems. Technische Mechanik - European Journal of Engineering
Mechanics, 45(1), 1–23. https://doi.org/10.24352/UB.OVGU-2025-037
bibtex: '@article{de Payrebrune_Flaßkamp_Ströhla_Sattel_Bestle_Röder_Eberhard_Peitz_Stoffel_Rutwik_et
al._2025, title={The impact of AI on engineering design procedures for dynamical
systems}, volume={45}, DOI={10.24352/UB.OVGU-2025-037},
number={1}, journal={Technische Mechanik - European Journal of Engineering Mechanics},
author={de Payrebrune, Kristin M. and Flaßkamp, Kathrin and Ströhla, Tom and Sattel,
Thomas and Bestle, Dieter and Röder, Benedict and Eberhard, Peter and Peitz, Sebastian
and Stoffel, Marcus and Rutwik, Gulakala and et al.}, year={2025}, pages={1–23}
}'
chicago: 'Payrebrune, Kristin M. de, Kathrin Flaßkamp, Tom Ströhla, Thomas Sattel,
Dieter Bestle, Benedict Röder, Peter Eberhard, et al. “The Impact of AI on Engineering
Design Procedures for Dynamical Systems.” Technische Mechanik - European Journal
of Engineering Mechanics 45, no. 1 (2025): 1–23. https://doi.org/10.24352/UB.OVGU-2025-037.'
ieee: 'K. M. de Payrebrune et al., “The impact of AI on engineering design
procedures for dynamical systems,” Technische Mechanik - European Journal of
Engineering Mechanics, vol. 45, no. 1, pp. 1–23, 2025, doi: 10.24352/UB.OVGU-2025-037.'
mla: de Payrebrune, Kristin M., et al. “The Impact of AI on Engineering Design Procedures
for Dynamical Systems.” Technische Mechanik - European Journal of Engineering
Mechanics, vol. 45, no. 1, 2025, pp. 1–23, doi:10.24352/UB.OVGU-2025-037.
short: K.M. de Payrebrune, K. Flaßkamp, T. Ströhla, T. Sattel, D. Bestle, B. Röder,
P. Eberhard, S. Peitz, M. Stoffel, G. Rutwik, B. Aditya, M.C. Wohlleben, W. Sextro,
M. Raff, C.D. Remy, M. Yadav, M. Stender, J. van Delden, T. Lüddecke, S.C. Langer,
J. Schultz, C. Blech, Technische Mechanik - European Journal of Engineering Mechanics
45 (2025) 1–23.
date_created: 2024-12-18T09:07:41Z
date_updated: 2026-03-03T06:31:55Z
doi: 10.24352/UB.OVGU-2025-037
intvolume: ' 45'
issue: '1'
language:
- iso: eng
page: 1-23
publication: Technische Mechanik - European Journal of Engineering Mechanics
quality_controlled: '1'
status: public
title: The impact of AI on engineering design procedures for dynamical systems
type: journal_article
user_id: '43991'
volume: 45
year: '2025'
...