---
_id: '30263'
abstract:
- lang: eng
text: 'High-strength wire materials are usually available as strip material which
is further processed in a forming process (e.g. punch-bending). For storage and
transport of the semi-finished wire to the customer, the material is wound onto
coils. The manufacturing and coiling process introduces plastic deformations into
the wire, which lead to undesirable residual stresses and wire curvature of the
semi-finished product. These residual stresses and curvatures cause variations
in the material properties of the semi-finished product, which have a negative
impact on the subsequent product quality. Straightening machines are used to compensate
the residual stresses and the curvature in the wire. At the beginning of the straightening
process, the straightening machines must be set up in such a way that residual
stresses and curvatures are optimally compensated. This setup process is usually
a manual and iterative process, where a lot of material is wasted until the optimal
settings for the straightening machine are found.In order to reduce the amount
of material waste, the operator must be supported in the setup process. In this
context, a new and innovative setup assistance system was developed to support
the operator during the setup process. The setup assistant system automatically
detects the wire curvature by means of an optical measuring system. Based on the
optically detected measuring points, the wire curvature is determined by a robust
calculation algorithm. Based on a database built up through the carried out experimental
and numerical research work, the optimum setting parameters for the straightening
machine are suggested to the operator without lengthy trial and error. After confirmation
by the operator, the roller settings are automatically adjusted by the mechatronic
straightening machine. With the presented method, the conventional iterative setup
procedure can be made more resource-efficient and a high straightening quality
can be reproducibly achieved. '
author:
- first_name: Lukas
full_name: Bathelt, Lukas
last_name: Bathelt
- first_name: Fabian
full_name: Bader, Fabian
id: '65204'
last_name: Bader
- first_name: Eugen
full_name: Djakow, Eugen
id: '7904'
last_name: Djakow
- first_name: Christian
full_name: Henke, Christian
last_name: Henke
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
- first_name: Werner
full_name: Homberg, Werner
last_name: Homberg
citation:
ama: 'Bathelt L, Bader F, Djakow E, Henke C, Trächtler A, Homberg W. Innovative
assistance system for setting up a mechatronic straightening machine. In: ; 2022.
doi:https://doi.org/10.4028/p-vs07w9'
apa: Bathelt, L., Bader, F., Djakow, E., Henke, C., Trächtler, A., & Homberg,
W. (2022). Innovative assistance system for setting up a mechatronic straightening
machine. ESAFORM 2022, Braga / Portugal. https://doi.org/10.4028/p-vs07w9
bibtex: '@inproceedings{Bathelt_Bader_Djakow_Henke_Trächtler_Homberg_2022, title={Innovative
assistance system for setting up a mechatronic straightening machine}, DOI={https://doi.org/10.4028/p-vs07w9},
author={Bathelt, Lukas and Bader, Fabian and Djakow, Eugen and Henke, Christian
and Trächtler, Ansgar and Homberg, Werner}, year={2022} }'
chicago: Bathelt, Lukas, Fabian Bader, Eugen Djakow, Christian Henke, Ansgar Trächtler,
and Werner Homberg. “Innovative Assistance System for Setting up a Mechatronic
Straightening Machine,” 2022. https://doi.org/10.4028/p-vs07w9.
ieee: 'L. Bathelt, F. Bader, E. Djakow, C. Henke, A. Trächtler, and W. Homberg,
“Innovative assistance system for setting up a mechatronic straightening machine,”
presented at the ESAFORM 2022, Braga / Portugal, 2022, doi: https://doi.org/10.4028/p-vs07w9.'
mla: Bathelt, Lukas, et al. Innovative Assistance System for Setting up a Mechatronic
Straightening Machine. 2022, doi:https://doi.org/10.4028/p-vs07w9.
short: 'L. Bathelt, F. Bader, E. Djakow, C. Henke, A. Trächtler, W. Homberg, in:
2022.'
conference:
end_date: 2022-04-29
location: Braga / Portugal
name: ESAFORM 2022
start_date: 2022-04-26
date_created: 2022-03-11T11:03:06Z
date_updated: 2023-04-27T12:06:58Z
department:
- _id: '241'
- _id: '156'
- _id: '153'
doi: https://doi.org/10.4028/p-vs07w9
language:
- iso: eng
quality_controlled: '1'
status: public
title: Innovative assistance system for setting up a mechatronic straightening machine
type: conference
user_id: '552'
year: '2022'
...
---
_id: '30265'
abstract:
- lang: eng
text: 'Due to increasing globalization and rising quality requirements, the steel
and metal processing industry is facing growing cost and innovation pressure.
Not least because of their high lightweight potential, high-strength steel materials
are meeting the growing material requirements of steel and metal processing in
areas such as aerospace and medical technology. In particular, the tight tolerance
limits of applicable shape and dimensional accuracies pose a challenge in the
processing of high-strength steel strip materials. Improving the processability
of high-strength steel materials through the use of straighteners with set-up
assistance systems significantly increases the potential for competing with other
materials such as aluminum or magnesium alloys. '
author:
- first_name: Fabian
full_name: Bader, Fabian
id: '65204'
last_name: Bader
- first_name: Lukas
full_name: Bathelt, Lukas
last_name: Bathelt
- first_name: Eugen
full_name: Djakow, Eugen
id: '7904'
last_name: Djakow
- first_name: Christian
full_name: Henke, Christian
last_name: Henke
- first_name: Werner
full_name: Homberg, Werner
last_name: Homberg
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: 'Bader F, Bathelt L, Djakow E, Henke C, Homberg W, Trächtler A. An approach
for an innovative 3d steel strip straightening machine for curvature and saber
compensation. In: ; 2022. doi:https://doi.org/10.4028/p-87wvu0'
apa: Bader, F., Bathelt, L., Djakow, E., Henke, C., Homberg, W., & Trächtler,
A. (2022). An approach for an innovative 3d steel strip straightening machine
for curvature and saber compensation. ESAFORM 2022, Braga / Portugal. https://doi.org/10.4028/p-87wvu0
bibtex: '@inproceedings{Bader_Bathelt_Djakow_Henke_Homberg_Trächtler_2022, title={An
approach for an innovative 3d steel strip straightening machine for curvature
and saber compensation}, DOI={https://doi.org/10.4028/p-87wvu0},
author={Bader, Fabian and Bathelt, Lukas and Djakow, Eugen and Henke, Christian
and Homberg, Werner and Trächtler, Ansgar}, year={2022} }'
chicago: Bader, Fabian, Lukas Bathelt, Eugen Djakow, Christian Henke, Werner Homberg,
and Ansgar Trächtler. “An Approach for an Innovative 3d Steel Strip Straightening
Machine for Curvature and Saber Compensation,” 2022. https://doi.org/10.4028/p-87wvu0.
ieee: 'F. Bader, L. Bathelt, E. Djakow, C. Henke, W. Homberg, and A. Trächtler,
“An approach for an innovative 3d steel strip straightening machine for curvature
and saber compensation,” presented at the ESAFORM 2022, Braga / Portugal, 2022,
doi: https://doi.org/10.4028/p-87wvu0.'
mla: Bader, Fabian, et al. An Approach for an Innovative 3d Steel Strip Straightening
Machine for Curvature and Saber Compensation. 2022, doi:https://doi.org/10.4028/p-87wvu0.
short: 'F. Bader, L. Bathelt, E. Djakow, C. Henke, W. Homberg, A. Trächtler, in:
2022.'
conference:
end_date: 2022-04-29
location: Braga / Portugal
name: ESAFORM 2022
start_date: 2022-04-26
date_created: 2022-03-11T11:08:06Z
date_updated: 2023-04-27T12:06:39Z
department:
- _id: '156'
- _id: '241'
- _id: '153'
doi: https://doi.org/10.4028/p-87wvu0
language:
- iso: eng
quality_controlled: '1'
status: public
title: An approach for an innovative 3d steel strip straightening machine for curvature
and saber compensation
type: conference
user_id: '552'
year: '2022'
...
---
_id: '33982'
author:
- first_name: Steven
full_name: Koppert, Steven
last_name: Koppert
- first_name: Christian
full_name: Henke, Christian
last_name: Henke
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
- first_name: Stefan
full_name: Möhringer, Stefan
last_name: Möhringer
citation:
ama: Koppert S, Henke C, Trächtler A, Möhringer S. Tool Wear Monitoring of a Tree
Log Bandsaw using a Deep Convolutional Neural Network on challenging data. IFAC-PapersOnLine.
2022;55(2):554-560. doi:10.1016/j.ifacol.2022.04.252
apa: Koppert, S., Henke, C., Trächtler, A., & Möhringer, S. (2022). Tool Wear
Monitoring of a Tree Log Bandsaw using a Deep Convolutional Neural Network on
challenging data. IFAC-PapersOnLine, 55(2), 554–560. https://doi.org/10.1016/j.ifacol.2022.04.252
bibtex: '@article{Koppert_Henke_Trächtler_Möhringer_2022, title={Tool Wear Monitoring
of a Tree Log Bandsaw using a Deep Convolutional Neural Network on challenging
data}, volume={55}, DOI={10.1016/j.ifacol.2022.04.252},
number={2}, journal={IFAC-PapersOnLine}, publisher={Elsevier BV}, author={Koppert,
Steven and Henke, Christian and Trächtler, Ansgar and Möhringer, Stefan}, year={2022},
pages={554–560} }'
chicago: 'Koppert, Steven, Christian Henke, Ansgar Trächtler, and Stefan Möhringer.
“Tool Wear Monitoring of a Tree Log Bandsaw Using a Deep Convolutional Neural
Network on Challenging Data.” IFAC-PapersOnLine 55, no. 2 (2022): 554–60.
https://doi.org/10.1016/j.ifacol.2022.04.252.'
ieee: 'S. Koppert, C. Henke, A. Trächtler, and S. Möhringer, “Tool Wear Monitoring
of a Tree Log Bandsaw using a Deep Convolutional Neural Network on challenging
data,” IFAC-PapersOnLine, vol. 55, no. 2, pp. 554–560, 2022, doi: 10.1016/j.ifacol.2022.04.252.'
mla: Koppert, Steven, et al. “Tool Wear Monitoring of a Tree Log Bandsaw Using a
Deep Convolutional Neural Network on Challenging Data.” IFAC-PapersOnLine,
vol. 55, no. 2, Elsevier BV, 2022, pp. 554–60, doi:10.1016/j.ifacol.2022.04.252.
short: S. Koppert, C. Henke, A. Trächtler, S. Möhringer, IFAC-PapersOnLine 55 (2022)
554–560.
date_created: 2022-11-02T17:19:30Z
date_updated: 2023-04-27T12:04:32Z
department:
- _id: '153'
- _id: '241'
doi: 10.1016/j.ifacol.2022.04.252
intvolume: ' 55'
issue: '2'
keyword:
- Control and Systems Engineering
language:
- iso: eng
page: 554-560
publication: IFAC-PapersOnLine
publication_identifier:
issn:
- 2405-8963
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Tool Wear Monitoring of a Tree Log Bandsaw using a Deep Convolutional Neural
Network on challenging data
type: journal_article
user_id: '552'
volume: 55
year: '2022'
...
---
_id: '31085'
author:
- first_name: Anian
full_name: Brosch, Anian
id: '75779'
last_name: Brosch
orcid: 0000-0003-4871-1664
- first_name: Johann
full_name: Rauhaus, Johann
id: '63776'
last_name: Rauhaus
- first_name: Oliver
full_name: Wallscheid, Oliver
id: '11291'
last_name: Wallscheid
orcid: https://orcid.org/0000-0001-9362-8777
- first_name: Joachim
full_name: Böcker, Joachim
id: '66'
last_name: Böcker
orcid: 0000-0002-8480-7295
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: Brosch A, Rauhaus J, Wallscheid O, Böcker J, Zimmer D. Data-Driven Adaptive
Torque Oscillation Compensation for Multi-Motor Drive Systems. IEEE Open Journal
of Industry Applications. Published online 2022. doi:10.1109/ojia.2022.3171333
apa: Brosch, A., Rauhaus, J., Wallscheid, O., Böcker, J., & Zimmer, D. (2022).
Data-Driven Adaptive Torque Oscillation Compensation for Multi-Motor Drive Systems.
IEEE Open Journal of Industry Applications. https://doi.org/10.1109/ojia.2022.3171333
bibtex: '@article{Brosch_Rauhaus_Wallscheid_Böcker_Zimmer_2022, title={Data-Driven
Adaptive Torque Oscillation Compensation for Multi-Motor Drive Systems}, DOI={10.1109/ojia.2022.3171333},
journal={IEEE Open Journal of Industry Applications}, publisher={Institute of
Electrical and Electronics Engineers (IEEE)}, author={Brosch, Anian and Rauhaus,
Johann and Wallscheid, Oliver and Böcker, Joachim and Zimmer, Detmar}, year={2022}
}'
chicago: Brosch, Anian, Johann Rauhaus, Oliver Wallscheid, Joachim Böcker, and Detmar
Zimmer. “Data-Driven Adaptive Torque Oscillation Compensation for Multi-Motor
Drive Systems.” IEEE Open Journal of Industry Applications, 2022. https://doi.org/10.1109/ojia.2022.3171333.
ieee: 'A. Brosch, J. Rauhaus, O. Wallscheid, J. Böcker, and D. Zimmer, “Data-Driven
Adaptive Torque Oscillation Compensation for Multi-Motor Drive Systems,” IEEE
Open Journal of Industry Applications, 2022, doi: 10.1109/ojia.2022.3171333.'
mla: Brosch, Anian, et al. “Data-Driven Adaptive Torque Oscillation Compensation
for Multi-Motor Drive Systems.” IEEE Open Journal of Industry Applications,
Institute of Electrical and Electronics Engineers (IEEE), 2022, doi:10.1109/ojia.2022.3171333.
short: A. Brosch, J. Rauhaus, O. Wallscheid, J. Böcker, D. Zimmer, IEEE Open Journal
of Industry Applications (2022).
date_created: 2022-05-09T08:52:27Z
date_updated: 2023-04-27T12:04:22Z
department:
- _id: '52'
- _id: '146'
doi: 10.1109/ojia.2022.3171333
language:
- iso: eng
publication: IEEE Open Journal of Industry Applications
publication_identifier:
issn:
- 2644-1241
publication_status: published
publisher: Institute of Electrical and Electronics Engineers (IEEE)
quality_controlled: '1'
status: public
title: Data-Driven Adaptive Torque Oscillation Compensation for Multi-Motor Drive
Systems
type: journal_article
user_id: '38077'
year: '2022'
...
---
_id: '33978'
author:
- first_name: Lukas
full_name: Bathelt, Lukas
last_name: Bathelt
- first_name: Fabian
full_name: Bader, Fabian
id: '65204'
last_name: Bader
- first_name: Eugen
full_name: Djakow, Eugen
id: '7904'
last_name: Djakow
- first_name: Christian
full_name: Henke, Christian
last_name: Henke
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
- first_name: Werner
full_name: Homberg, Werner
last_name: Homberg
citation:
ama: 'Bathelt L, Bader F, Djakow E, Henke C, Trächtler A, Homberg W. Mechatronische
Richtapparate: Intelligente Richttechnik von hochfesten Flachdrähten. In: Fachtagung
VDI MECHATRONIK 2022 . ; 2022:19-24.'
apa: 'Bathelt, L., Bader, F., Djakow, E., Henke, C., Trächtler, A., & Homberg,
W. (2022). Mechatronische Richtapparate: Intelligente Richttechnik von hochfesten
Flachdrähten. Fachtagung VDI MECHATRONIK 2022 , 19–24.'
bibtex: '@inproceedings{Bathelt_Bader_Djakow_Henke_Trächtler_Homberg_2022, place={Darmstadt},
title={Mechatronische Richtapparate: Intelligente Richttechnik von hochfesten
Flachdrähten}, booktitle={Fachtagung VDI MECHATRONIK 2022 }, author={Bathelt,
Lukas and Bader, Fabian and Djakow, Eugen and Henke, Christian and Trächtler,
Ansgar and Homberg, Werner}, year={2022}, pages={19–24} }'
chicago: 'Bathelt, Lukas, Fabian Bader, Eugen Djakow, Christian Henke, Ansgar Trächtler,
and Werner Homberg. “Mechatronische Richtapparate: Intelligente Richttechnik von
Hochfesten Flachdrähten.” In Fachtagung VDI MECHATRONIK 2022 , 19–24. Darmstadt,
2022.'
ieee: 'L. Bathelt, F. Bader, E. Djakow, C. Henke, A. Trächtler, and W. Homberg,
“Mechatronische Richtapparate: Intelligente Richttechnik von hochfesten Flachdrähten,”
in Fachtagung VDI MECHATRONIK 2022 , Darmstadt, 2022, pp. 19–24.'
mla: 'Bathelt, Lukas, et al. “Mechatronische Richtapparate: Intelligente Richttechnik
von Hochfesten Flachdrähten.” Fachtagung VDI MECHATRONIK 2022 , 2022, pp.
19–24.'
short: 'L. Bathelt, F. Bader, E. Djakow, C. Henke, A. Trächtler, W. Homberg, in:
Fachtagung VDI MECHATRONIK 2022 , Darmstadt, 2022, pp. 19–24.'
conference:
end_date: 2022-03-24
location: Darmstadt
name: Fachtagung VDI MECHATRONIK 2022
start_date: 2022-03-23
date_created: 2022-11-02T16:51:32Z
date_updated: 2023-04-27T12:07:25Z
department:
- _id: '153'
- _id: '241'
- _id: '153'
language:
- iso: eng
page: 19-24
place: Darmstadt
publication: 'Fachtagung VDI MECHATRONIK 2022 '
quality_controlled: '1'
status: public
title: 'Mechatronische Richtapparate: Intelligente Richttechnik von hochfesten Flachdrähten'
type: conference
user_id: '552'
year: '2022'
...
---
_id: '33469'
author:
- first_name: Stefan
full_name: Schütz, Stefan
last_name: Schütz
- first_name: Robin
full_name: Schmidt, Robin
last_name: Schmidt
- first_name: Christian
full_name: Henke, Christian
last_name: Henke
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: 'Schütz S, Schmidt R, Henke C, Trächtler A. Virtual Commissioning of the Trajectory
Tracking Control of a Sensor-Guided, Kinematically Redundant Robotic Welding System
on a PLC. In: 2022 IEEE International Systems Conference (SysCon). IEEE;
2022:1-8. doi:10.1109/syscon53536.2022.9773878'
apa: Schütz, S., Schmidt, R., Henke, C., & Trächtler, A. (2022). Virtual Commissioning
of the Trajectory Tracking Control of a Sensor-Guided, Kinematically Redundant
Robotic Welding System on a PLC. 2022 IEEE International Systems Conference
(SysCon), 1–8. https://doi.org/10.1109/syscon53536.2022.9773878
bibtex: '@inproceedings{Schütz_Schmidt_Henke_Trächtler_2022, title={Virtual Commissioning
of the Trajectory Tracking Control of a Sensor-Guided, Kinematically Redundant
Robotic Welding System on a PLC}, DOI={10.1109/syscon53536.2022.9773878},
booktitle={2022 IEEE International Systems Conference (SysCon)}, publisher={IEEE},
author={Schütz, Stefan and Schmidt, Robin and Henke, Christian and Trächtler,
Ansgar}, year={2022}, pages={1–8} }'
chicago: Schütz, Stefan, Robin Schmidt, Christian Henke, and Ansgar Trächtler. “Virtual
Commissioning of the Trajectory Tracking Control of a Sensor-Guided, Kinematically
Redundant Robotic Welding System on a PLC.” In 2022 IEEE International Systems
Conference (SysCon), 1–8. IEEE, 2022. https://doi.org/10.1109/syscon53536.2022.9773878.
ieee: 'S. Schütz, R. Schmidt, C. Henke, and A. Trächtler, “Virtual Commissioning
of the Trajectory Tracking Control of a Sensor-Guided, Kinematically Redundant
Robotic Welding System on a PLC,” in 2022 IEEE International Systems Conference
(SysCon), Montreal, QC, Canada, 2022, pp. 1–8, doi: 10.1109/syscon53536.2022.9773878.'
mla: Schütz, Stefan, et al. “Virtual Commissioning of the Trajectory Tracking Control
of a Sensor-Guided, Kinematically Redundant Robotic Welding System on a PLC.”
2022 IEEE International Systems Conference (SysCon), IEEE, 2022, pp. 1–8,
doi:10.1109/syscon53536.2022.9773878.
short: 'S. Schütz, R. Schmidt, C. Henke, A. Trächtler, in: 2022 IEEE International
Systems Conference (SysCon), IEEE, 2022, pp. 1–8.'
conference:
end_date: 2022-05-23
location: Montreal, QC, Canada
name: 'SYSCON2022: The 16th Annual IEEE International Systems Conference'
start_date: 2022-04-25
date_created: 2022-09-22T09:52:10Z
date_updated: 2023-04-27T12:08:04Z
department:
- _id: '153'
- _id: '241'
doi: 10.1109/syscon53536.2022.9773878
language:
- iso: eng
page: 1-8
publication: 2022 IEEE International Systems Conference (SysCon)
publication_status: published
publisher: IEEE
quality_controlled: '1'
status: public
title: Virtual Commissioning of the Trajectory Tracking Control of a Sensor-Guided,
Kinematically Redundant Robotic Welding System on a PLC
type: conference
user_id: '552'
year: '2022'
...
---
_id: '33976'
author:
- first_name: 'Cederic '
full_name: 'Lenz, Cederic '
last_name: Lenz
- first_name: Fabian
full_name: Hanke, Fabian
last_name: Hanke
- first_name: Christian
full_name: Henke, Christian
last_name: Henke
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: 'Lenz C, Hanke F, Henke C, Trächtler A. Anomaly Detection in Hot Forming Processes
using Hybrid Modeling - Part II. In: 2022 27th IEEE International Conference
on Emerging Technologies and Factory Automation (ETFA ). IEEE; 2022. doi:10.1109/ETFA52439.2022.9921510'
apa: Lenz, C., Hanke, F., Henke, C., & Trächtler, A. (2022). Anomaly Detection
in Hot Forming Processes using Hybrid Modeling - Part II. 2022 27th IEEE International
Conference on Emerging Technologies and Factory Automation (ETFA ). 2022 IEEE
27th International Conference on Emerging Technologies and Factory Automation
(ETFA), Stuttgart, Germany . https://doi.org/10.1109/ETFA52439.2022.9921510
bibtex: '@inproceedings{Lenz_Hanke_Henke_Trächtler_2022, title={Anomaly Detection
in Hot Forming Processes using Hybrid Modeling - Part II}, DOI={10.1109/ETFA52439.2022.9921510},
booktitle={2022 27th IEEE International Conference on Emerging Technologies and
Factory Automation (ETFA )}, publisher={IEEE}, author={Lenz, Cederic and Hanke,
Fabian and Henke, Christian and Trächtler, Ansgar}, year={2022} }'
chicago: Lenz, Cederic , Fabian Hanke, Christian Henke, and Ansgar Trächtler. “Anomaly
Detection in Hot Forming Processes Using Hybrid Modeling - Part II.” In 2022
27th IEEE International Conference on Emerging Technologies and Factory Automation
(ETFA ). IEEE, 2022. https://doi.org/10.1109/ETFA52439.2022.9921510.
ieee: 'C. Lenz, F. Hanke, C. Henke, and A. Trächtler, “Anomaly Detection in Hot
Forming Processes using Hybrid Modeling - Part II,” presented at the 2022 IEEE
27th International Conference on Emerging Technologies and Factory Automation
(ETFA), Stuttgart, Germany , 2022, doi: 10.1109/ETFA52439.2022.9921510.'
mla: Lenz, Cederic, et al. “Anomaly Detection in Hot Forming Processes Using Hybrid
Modeling - Part II.” 2022 27th IEEE International Conference on Emerging Technologies
and Factory Automation (ETFA ), IEEE, 2022, doi:10.1109/ETFA52439.2022.9921510.
short: 'C. Lenz, F. Hanke, C. Henke, A. Trächtler, in: 2022 27th IEEE International
Conference on Emerging Technologies and Factory Automation (ETFA ), IEEE, 2022.'
conference:
end_date: 2022-09-09
location: 'Stuttgart, Germany '
name: 2022 IEEE 27th International Conference on Emerging Technologies and Factory
Automation (ETFA)
start_date: 2022-09-06
date_created: 2022-11-02T16:31:47Z
date_updated: 2023-04-27T12:07:44Z
department:
- _id: '153'
- _id: '241'
doi: 10.1109/ETFA52439.2022.9921510
language:
- iso: eng
publication: 2022 27th IEEE International Conference on Emerging Technologies and
Factory Automation (ETFA )
publication_status: published
publisher: IEEE
quality_controlled: '1'
status: public
title: Anomaly Detection in Hot Forming Processes using Hybrid Modeling - Part II
type: conference
user_id: '552'
year: '2022'
...
---
_id: '34434'
abstract:
- lang: eng
text: In timing chain drives, the chain is the critical component regarding the
wear. Relative movements take place at the chain joint between pin and bush, which
lead to wear of the chain joint due to friction and so to chain elongation. The
chain joint is generally lubricated with oils, through which elastohydrodynamic
processes can occur in the gap between the pin and the bush of the chain joint.
A simulation model is developed here to examine these elastohydrodynamic processes
considering a mass conserving cavitation model, the Newtonian flow behaviour of
the lubricant and the structuring of the bush surface, whereby the real form of
the bush is considered. MBS simulations are used to obtain realistic loads on
the chain joint.
author:
- first_name: Lionel
full_name: Simo Kamga, Lionel
last_name: Simo Kamga
- first_name: Dominik
full_name: Meffert, Dominik
last_name: Meffert
- first_name: Balázs
full_name: Magyar, Balázs
id: '97759'
last_name: Magyar
- first_name: Manuel
full_name: Oehler, Manuel
last_name: Oehler
- first_name: Bernd
full_name: Sauer, Bernd
last_name: Sauer
citation:
ama: Simo Kamga L, Meffert D, Magyar B, Oehler M, Sauer B. Simulative investigation
of the influence of surface texturing on the elastohydrodynamic lubrication in
chain joints. Tribology International. 2022;171:107564. doi:https://doi.org/10.1016/j.triboint.2022.107564
apa: Simo Kamga, L., Meffert, D., Magyar, B., Oehler, M., & Sauer, B. (2022).
Simulative investigation of the influence of surface texturing on the elastohydrodynamic
lubrication in chain joints. Tribology International, 171, 107564.
https://doi.org/10.1016/j.triboint.2022.107564
bibtex: '@article{Simo Kamga_Meffert_Magyar_Oehler_Sauer_2022, title={Simulative
investigation of the influence of surface texturing on the elastohydrodynamic
lubrication in chain joints}, volume={171}, DOI={https://doi.org/10.1016/j.triboint.2022.107564},
journal={Tribology International}, author={Simo Kamga, Lionel and Meffert, Dominik
and Magyar, Balázs and Oehler, Manuel and Sauer, Bernd}, year={2022}, pages={107564}
}'
chicago: 'Simo Kamga, Lionel, Dominik Meffert, Balázs Magyar, Manuel Oehler, and
Bernd Sauer. “Simulative Investigation of the Influence of Surface Texturing on
the Elastohydrodynamic Lubrication in Chain Joints.” Tribology International
171 (2022): 107564. https://doi.org/10.1016/j.triboint.2022.107564.'
ieee: 'L. Simo Kamga, D. Meffert, B. Magyar, M. Oehler, and B. Sauer, “Simulative
investigation of the influence of surface texturing on the elastohydrodynamic
lubrication in chain joints,” Tribology International, vol. 171, p. 107564,
2022, doi: https://doi.org/10.1016/j.triboint.2022.107564.'
mla: Simo Kamga, Lionel, et al. “Simulative Investigation of the Influence of Surface
Texturing on the Elastohydrodynamic Lubrication in Chain Joints.” Tribology
International, vol. 171, 2022, p. 107564, doi:https://doi.org/10.1016/j.triboint.2022.107564.
short: L. Simo Kamga, D. Meffert, B. Magyar, M. Oehler, B. Sauer, Tribology International
171 (2022) 107564.
date_created: 2022-12-15T09:28:48Z
date_updated: 2023-04-27T12:10:34Z
department:
- _id: '146'
doi: https://doi.org/10.1016/j.triboint.2022.107564
extern: '1'
intvolume: ' 171'
keyword:
- EHL-simulation
- Cavitation
- Chain drives
- Chain joint
- Micro-structuring
language:
- iso: eng
page: '107564'
publication: Tribology International
publication_identifier:
issn:
- 0301-679X
quality_controlled: '1'
status: public
title: Simulative investigation of the influence of surface texturing on the elastohydrodynamic
lubrication in chain joints
type: journal_article
user_id: '38077'
volume: 171
year: '2022'
...
---
_id: '44230'
author:
- first_name: Marc
full_name: Hagemeyer, Marc
last_name: Hagemeyer
citation:
ama: Hagemeyer M. Untersuchung und Entwicklung eines modularen speicherbasierten
Schweißstromgenerators mit geringster Stromschwankungsbreite für das Widerstandsschweißen.;
2022. doi:10.17619/UNIPB/1-1582
apa: Hagemeyer, M. (2022). Untersuchung und Entwicklung eines modularen speicherbasierten
Schweißstromgenerators mit geringster Stromschwankungsbreite für das Widerstandsschweißen.
https://doi.org/10.17619/UNIPB/1-1582
bibtex: '@book{Hagemeyer_2022, title={Untersuchung und Entwicklung eines modularen
speicherbasierten Schweißstromgenerators mit geringster Stromschwankungsbreite
für das Widerstandsschweißen}, DOI={10.17619/UNIPB/1-1582},
author={Hagemeyer, Marc}, year={2022} }'
chicago: Hagemeyer, Marc. Untersuchung und Entwicklung eines modularen speicherbasierten
Schweißstromgenerators mit geringster Stromschwankungsbreite für das Widerstandsschweißen,
2022. https://doi.org/10.17619/UNIPB/1-1582.
ieee: M. Hagemeyer, Untersuchung und Entwicklung eines modularen speicherbasierten
Schweißstromgenerators mit geringster Stromschwankungsbreite für das Widerstandsschweißen.
2022.
mla: Hagemeyer, Marc. Untersuchung und Entwicklung eines modularen speicherbasierten
Schweißstromgenerators mit geringster Stromschwankungsbreite für das Widerstandsschweißen.
2022, doi:10.17619/UNIPB/1-1582.
short: M. Hagemeyer, Untersuchung und Entwicklung eines modularen speicherbasierten
Schweißstromgenerators mit geringster Stromschwankungsbreite für das Widerstandsschweißen,
2022.
date_created: 2023-04-27T12:09:24Z
date_updated: 2023-04-27T12:11:12Z
department:
- _id: '52'
doi: 10.17619/UNIPB/1-1582
language:
- iso: ger
status: public
supervisor:
- first_name: Joachim
full_name: Böcker, Joachim
id: '66'
last_name: Böcker
orcid: 0000-0002-8480-7295
title: Untersuchung und Entwicklung eines modularen speicherbasierten Schweißstromgenerators
mit geringster Stromschwankungsbreite für das Widerstandsschweißen
type: dissertation
user_id: '71353'
year: '2022'
...
---
_id: '36838'
author:
- first_name: Stefan
full_name: Neumann, Stefan
id: '54897'
last_name: Neumann
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Mortaza
full_name: Otroshi, Mortaza
id: '71269'
last_name: Otroshi
orcid: 0000-0002-8652-9209
- first_name: Florian
full_name: Kneuper, Florian
last_name: Kneuper
- first_name: Andre
full_name: Schulze, Andre
last_name: Schulze
- first_name: Erman
full_name: Tekkaya, Erman
last_name: Tekkaya
citation:
ama: 'Neumann S, Meschut G, Otroshi M, Kneuper F, Schulze A, Tekkaya E. MECHANICALLY
JOINED EXTRUSION PROFILES FOR BATTERY TRAYS. In: ; 2022.'
apa: Neumann, S., Meschut, G., Otroshi, M., Kneuper, F., Schulze, A., & Tekkaya,
E. (2022). MECHANICALLY JOINED EXTRUSION PROFILES FOR BATTERY TRAYS.
bibtex: '@inproceedings{Neumann_Meschut_Otroshi_Kneuper_Schulze_Tekkaya_2022, title={MECHANICALLY
JOINED EXTRUSION PROFILES FOR BATTERY TRAYS}, author={Neumann, Stefan and Meschut,
Gerson and Otroshi, Mortaza and Kneuper, Florian and Schulze, Andre and Tekkaya,
Erman}, year={2022} }'
chicago: Neumann, Stefan, Gerson Meschut, Mortaza Otroshi, Florian Kneuper, Andre
Schulze, and Erman Tekkaya. “MECHANICALLY JOINED EXTRUSION PROFILES FOR BATTERY
TRAYS,” 2022.
ieee: S. Neumann, G. Meschut, M. Otroshi, F. Kneuper, A. Schulze, and E. Tekkaya,
“MECHANICALLY JOINED EXTRUSION PROFILES FOR BATTERY TRAYS,” 2022.
mla: Neumann, Stefan, et al. MECHANICALLY JOINED EXTRUSION PROFILES FOR BATTERY
TRAYS. 2022.
short: 'S. Neumann, G. Meschut, M. Otroshi, F. Kneuper, A. Schulze, E. Tekkaya,
in: 2022.'
date_created: 2023-01-14T14:33:45Z
date_updated: 2023-04-27T13:11:02Z
department:
- _id: '157'
language:
- iso: eng
popular_science: '1'
publication_status: published
quality_controlled: '1'
status: public
title: MECHANICALLY JOINED EXTRUSION PROFILES FOR BATTERY TRAYS
type: conference
user_id: '54897'
year: '2022'
...
---
_id: '27375'
author:
- first_name: Andreas Markus
full_name: Schulz, Andreas Markus
id: '63109'
last_name: Schulz
- first_name: Christian
full_name: Wecker, Christian
id: '29891'
last_name: Wecker
- first_name: Venkatesh
full_name: Inguva, Venkatesh
id: '75069'
last_name: Inguva
- first_name: Alexey S.
full_name: Lopatin, Alexey S.
last_name: Lopatin
- first_name: Eugeny Y.
full_name: Kenig, Eugeny Y.
id: '665'
last_name: Kenig
citation:
ama: Schulz AM, Wecker C, Inguva V, Lopatin AS, Kenig EY. A PLIC-based method for
species mass transfer at free fluid interfaces. Chemical Engineering Science.
2022;250. doi:10.1016/j.ces.2021.117357
apa: Schulz, A. M., Wecker, C., Inguva, V., Lopatin, A. S., & Kenig, E. Y. (2022).
A PLIC-based method for species mass transfer at free fluid interfaces. Chemical
Engineering Science, 250. https://doi.org/10.1016/j.ces.2021.117357
bibtex: '@article{Schulz_Wecker_Inguva_Lopatin_Kenig_2022, title={A PLIC-based method
for species mass transfer at free fluid interfaces}, volume={250}, DOI={10.1016/j.ces.2021.117357},
journal={Chemical Engineering Science}, publisher={Elsevier}, author={Schulz,
Andreas Markus and Wecker, Christian and Inguva, Venkatesh and Lopatin, Alexey
S. and Kenig, Eugeny Y.}, year={2022} }'
chicago: Schulz, Andreas Markus, Christian Wecker, Venkatesh Inguva, Alexey S. Lopatin,
and Eugeny Y. Kenig. “A PLIC-Based Method for Species Mass Transfer at Free Fluid
Interfaces.” Chemical Engineering Science 250 (2022). https://doi.org/10.1016/j.ces.2021.117357.
ieee: 'A. M. Schulz, C. Wecker, V. Inguva, A. S. Lopatin, and E. Y. Kenig, “A PLIC-based
method for species mass transfer at free fluid interfaces,” Chemical Engineering
Science, vol. 250, 2022, doi: 10.1016/j.ces.2021.117357.'
mla: Schulz, Andreas Markus, et al. “A PLIC-Based Method for Species Mass Transfer
at Free Fluid Interfaces.” Chemical Engineering Science, vol. 250, Elsevier,
2022, doi:10.1016/j.ces.2021.117357.
short: A.M. Schulz, C. Wecker, V. Inguva, A.S. Lopatin, E.Y. Kenig, Chemical Engineering
Science 250 (2022).
conference:
end_date: 2021-06-16
location: Muster location
name: Muster Conference
start_date: 2021-06-15
date_created: 2021-11-11T12:56:23Z
date_updated: 2023-04-27T15:40:57Z
department:
- _id: '145'
doi: 10.1016/j.ces.2021.117357
intvolume: ' 250'
language:
- iso: eng
project:
- _id: '52'
name: 'PC2: Computing Resources Provided by the Paderborn Center for Parallel Computing'
publication: Chemical Engineering Science
publisher: Elsevier
quality_controlled: '1'
status: public
title: A PLIC-based method for species mass transfer at free fluid interfaces
type: journal_article
user_id: '90390'
volume: 250
year: '2022'
...
---
_id: '28942'
author:
- first_name: Christian
full_name: Wecker, Christian
id: '29891'
last_name: Wecker
- first_name: Andreas Markus
full_name: Schulz, Andreas Markus
id: '63109'
last_name: Schulz
- first_name: Jens
full_name: Heine, Jens
last_name: Heine
- first_name: Hans Jörg
full_name: Bart, Hans Jörg
last_name: Bart
- first_name: Eugeny Y.
full_name: Kenig, Eugeny Y.
id: '665'
last_name: Kenig
citation:
ama: Wecker C, Schulz AM, Heine J, Bart HJ, Kenig EY. Droplet formation –a numerical
investigation of liquid-liquid systems with consideration of Marangoni convection.
International Journal of Heat and Mass Transfer. 2022;188. doi:10.1016/j.ijheatmasstransfer.2021.122465
apa: Wecker, C., Schulz, A. M., Heine, J., Bart, H. J., & Kenig, E. Y. (2022).
Droplet formation –a numerical investigation of liquid-liquid systems with consideration
of Marangoni convection. International Journal of Heat and Mass Transfer,
188. https://doi.org/10.1016/j.ijheatmasstransfer.2021.122465
bibtex: '@article{Wecker_Schulz_Heine_Bart_Kenig_2022, title={Droplet formation
–a numerical investigation of liquid-liquid systems with consideration of Marangoni
convection}, volume={188}, DOI={10.1016/j.ijheatmasstransfer.2021.122465},
journal={International Journal of Heat and Mass Transfer}, publisher={ELSEVIER},
author={Wecker, Christian and Schulz, Andreas Markus and Heine, Jens and Bart,
Hans Jörg and Kenig, Eugeny Y.}, year={2022} }'
chicago: Wecker, Christian, Andreas Markus Schulz, Jens Heine, Hans Jörg Bart, and
Eugeny Y. Kenig. “Droplet Formation –a Numerical Investigation of Liquid-Liquid
Systems with Consideration of Marangoni Convection.” International Journal
of Heat and Mass Transfer 188 (2022). https://doi.org/10.1016/j.ijheatmasstransfer.2021.122465.
ieee: 'C. Wecker, A. M. Schulz, J. Heine, H. J. Bart, and E. Y. Kenig, “Droplet
formation –a numerical investigation of liquid-liquid systems with consideration
of Marangoni convection,” International Journal of Heat and Mass Transfer,
vol. 188, 2022, doi: 10.1016/j.ijheatmasstransfer.2021.122465.'
mla: Wecker, Christian, et al. “Droplet Formation –a Numerical Investigation of
Liquid-Liquid Systems with Consideration of Marangoni Convection.” International
Journal of Heat and Mass Transfer, vol. 188, ELSEVIER, 2022, doi:10.1016/j.ijheatmasstransfer.2021.122465.
short: C. Wecker, A.M. Schulz, J. Heine, H.J. Bart, E.Y. Kenig, International Journal
of Heat and Mass Transfer 188 (2022).
date_created: 2021-12-15T11:14:48Z
date_updated: 2023-04-27T15:28:14Z
department:
- _id: '145'
doi: 10.1016/j.ijheatmasstransfer.2021.122465
intvolume: ' 188'
language:
- iso: eng
project:
- _id: '52'
name: Computing Resources Provided by the Paderborn Center for Parallel Computing
publication: International Journal of Heat and Mass Transfer
publication_status: published
publisher: ELSEVIER
quality_controlled: '1'
status: public
title: Droplet formation –a numerical investigation of liquid-liquid systems with
consideration of Marangoni convection
type: journal_article
user_id: '90390'
volume: 188
year: '2022'
...
---
_id: '44239'
author:
- first_name: Daokun
full_name: Dai, Daokun
last_name: Dai
- first_name: Eugeny Y.
full_name: Kenig, Eugeny Y.
id: '665'
last_name: Kenig
- first_name: Reiner
full_name: Numrich, Reiner
last_name: Numrich
citation:
ama: Dai D, Kenig EY, Numrich R. Experimentelle Untersuchung der Tropfenkondensation
am chemisch modifizierten Edelstahl‐Drallrohr. Chemie Ingenieur Technik.
2022;94(6):905-911. doi:10.1002/cite.202100176
apa: Dai, D., Kenig, E. Y., & Numrich, R. (2022). Experimentelle Untersuchung
der Tropfenkondensation am chemisch modifizierten Edelstahl‐Drallrohr. Chemie
Ingenieur Technik, 94(6), 905–911. https://doi.org/10.1002/cite.202100176
bibtex: '@article{Dai_Kenig_Numrich_2022, title={Experimentelle Untersuchung der
Tropfenkondensation am chemisch modifizierten Edelstahl‐Drallrohr}, volume={94},
DOI={10.1002/cite.202100176},
number={6}, journal={Chemie Ingenieur Technik}, publisher={Wiley}, author={Dai,
Daokun and Kenig, Eugeny Y. and Numrich, Reiner}, year={2022}, pages={905–911}
}'
chicago: 'Dai, Daokun, Eugeny Y. Kenig, and Reiner Numrich. “Experimentelle Untersuchung
Der Tropfenkondensation Am Chemisch Modifizierten Edelstahl‐Drallrohr.” Chemie
Ingenieur Technik 94, no. 6 (2022): 905–11. https://doi.org/10.1002/cite.202100176.'
ieee: 'D. Dai, E. Y. Kenig, and R. Numrich, “Experimentelle Untersuchung der Tropfenkondensation
am chemisch modifizierten Edelstahl‐Drallrohr,” Chemie Ingenieur Technik,
vol. 94, no. 6, pp. 905–911, 2022, doi: 10.1002/cite.202100176.'
mla: Dai, Daokun, et al. “Experimentelle Untersuchung Der Tropfenkondensation Am
Chemisch Modifizierten Edelstahl‐Drallrohr.” Chemie Ingenieur Technik,
vol. 94, no. 6, Wiley, 2022, pp. 905–11, doi:10.1002/cite.202100176.
short: D. Dai, E.Y. Kenig, R. Numrich, Chemie Ingenieur Technik 94 (2022) 905–911.
date_created: 2023-04-27T16:24:30Z
date_updated: 2023-04-27T16:27:01Z
department:
- _id: '145'
doi: 10.1002/cite.202100176
intvolume: ' 94'
issue: '6'
keyword:
- Industrial and Manufacturing Engineering
- General Chemical Engineering
- General Chemistry
language:
- iso: eng
page: 905-911
publication: Chemie Ingenieur Technik
publication_identifier:
issn:
- 0009-286X
- 1522-2640
publication_status: published
publisher: Wiley
quality_controlled: '1'
status: public
title: Experimentelle Untersuchung der Tropfenkondensation am chemisch modifizierten
Edelstahl‐Drallrohr
type: journal_article
user_id: '90390'
volume: 94
year: '2022'
...
---
_id: '44235'
article_number: '1110066'
author:
- first_name: Venkatesh
full_name: Inguva, Venkatesh
id: '75069'
last_name: Inguva
- first_name: Eugeny Y.
full_name: Kenig, Eugeny Y.
id: '665'
last_name: Kenig
- first_name: J. Blair
full_name: Perot, J. Blair
last_name: Perot
citation:
ama: Inguva V, Kenig EY, Perot JB. A front-tracking method for two-phase flow simulation
with no spurious currents. Journal of Computational Physics. 2022;456.
apa: Inguva, V., Kenig, E. Y., & Perot, J. B. (2022). A front-tracking method
for two-phase flow simulation with no spurious currents. Journal of Computational
Physics, 456, Article 1110066.
bibtex: '@article{Inguva_Kenig_Perot_2022, title={A front-tracking method for two-phase
flow simulation with no spurious currents}, volume={456}, number={1110066}, journal={Journal
of Computational Physics}, publisher={Elsevier}, author={Inguva, Venkatesh and
Kenig, Eugeny Y. and Perot, J. Blair}, year={2022} }'
chicago: Inguva, Venkatesh, Eugeny Y. Kenig, and J. Blair Perot. “A Front-Tracking
Method for Two-Phase Flow Simulation with No Spurious Currents.” Journal of
Computational Physics 456 (2022).
ieee: V. Inguva, E. Y. Kenig, and J. B. Perot, “A front-tracking method for two-phase
flow simulation with no spurious currents,” Journal of Computational Physics,
vol. 456, Art. no. 1110066, 2022.
mla: Inguva, Venkatesh, et al. “A Front-Tracking Method for Two-Phase Flow Simulation
with No Spurious Currents.” Journal of Computational Physics, vol. 456,
1110066, Elsevier, 2022.
short: V. Inguva, E.Y. Kenig, J.B. Perot, Journal of Computational Physics 456 (2022).
date_created: 2023-04-27T15:58:12Z
date_updated: 2023-04-27T16:09:55Z
department:
- _id: '145'
intvolume: ' 456'
language:
- iso: eng
project:
- _id: '52'
name: 'PC2: Computing Resources Provided by the Paderborn Center for Parallel Computing'
publication: Journal of Computational Physics
publication_status: published
publisher: Elsevier
quality_controlled: '1'
status: public
title: A front-tracking method for two-phase flow simulation with no spurious currents
type: journal_article
user_id: '90390'
volume: 456
year: '2022'
...
---
_id: '36339'
abstract:
- lang: eng
text: Al-Li-based alloys are an attractive material for aircraft and aerospace applications.
Preparation of these alloys by twin-roll casting (TRC), which combines rapid metal
solidification and subsequent plastic reduction in a single processing step, could
improve the properties of the alloys compared to materials prepared by conventional
direct-chill casting. A commonly used approach for identifying primary phases
is a chemical analysis by energy dispersive spectroscopy (EDS). More accurate
results can be achieved by combining the method with diffraction analysis. This
process can be considerably simplified in microscopes equipped with automated
crystal orientation and phase mapping (ACOM-TEM). Al-Cu-Li-Mg-Zr alloy was prepared
by twin-roll casting. A combination of TEM and STEM images with chemical analysis
by EDS and ACOM-TEM was used to obtain complex information about phases of boundary
primary particles. The efficiency of the individual methods for the phase identification
in TRC Al-Li-based alloys is discussed.
author:
- first_name: Lucia
full_name: BAJTOŠOVÁ, Lucia
last_name: BAJTOŠOVÁ
- first_name: Olexandr
full_name: Grydin, Olexandr
id: '43822'
last_name: Grydin
- first_name: Mykhailo
full_name: STOLBCHENKO, Mykhailo
last_name: STOLBCHENKO
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
- first_name: Barbora
full_name: KŘIVSKÁ, Barbora
last_name: KŘIVSKÁ
- first_name: Rostislav
full_name: KRÁLÍK, Rostislav
last_name: KRÁLÍK
- first_name: Michaela
full_name: ŠLAPÁKOVÁ, Michaela
last_name: ŠLAPÁKOVÁ
- first_name: Miroslav
full_name: CIESLAR, Miroslav
last_name: CIESLAR
citation:
ama: 'BAJTOŠOVÁ L, Grydin O, STOLBCHENKO M, et al. Phase identification in twin-roll
cast Al-Li alloys. In: METAL 2022 Conference Proeedings. TANGER Ltd.; 2022.
doi:10.37904/metal.2022.4437'
apa: BAJTOŠOVÁ, L., Grydin, O., STOLBCHENKO, M., Schaper, M., KŘIVSKÁ, B., KRÁLÍK,
R., ŠLAPÁKOVÁ, M., & CIESLAR, M. (2022). Phase identification in twin-roll
cast Al-Li alloys. METAL 2022 Conference Proeedings. Metal 2022, Brno.
https://doi.org/10.37904/metal.2022.4437
bibtex: '@inproceedings{BAJTOŠOVÁ_Grydin_STOLBCHENKO_Schaper_KŘIVSKÁ_KRÁLÍK_ŠLAPÁKOVÁ_CIESLAR_2022,
title={Phase identification in twin-roll cast Al-Li alloys}, DOI={10.37904/metal.2022.4437},
booktitle={METAL 2022 Conference Proeedings}, publisher={TANGER Ltd.}, author={BAJTOŠOVÁ,
Lucia and Grydin, Olexandr and STOLBCHENKO, Mykhailo and Schaper, Mirko and KŘIVSKÁ,
Barbora and KRÁLÍK, Rostislav and ŠLAPÁKOVÁ, Michaela and CIESLAR, Miroslav},
year={2022} }'
chicago: BAJTOŠOVÁ, Lucia, Olexandr Grydin, Mykhailo STOLBCHENKO, Mirko Schaper,
Barbora KŘIVSKÁ, Rostislav KRÁLÍK, Michaela ŠLAPÁKOVÁ, and Miroslav CIESLAR. “Phase
Identification in Twin-Roll Cast Al-Li Alloys.” In METAL 2022 Conference Proeedings.
TANGER Ltd., 2022. https://doi.org/10.37904/metal.2022.4437.
ieee: 'L. BAJTOŠOVÁ et al., “Phase identification in twin-roll cast Al-Li
alloys,” presented at the Metal 2022, Brno, 2022, doi: 10.37904/metal.2022.4437.'
mla: BAJTOŠOVÁ, Lucia, et al. “Phase Identification in Twin-Roll Cast Al-Li Alloys.”
METAL 2022 Conference Proeedings, TANGER Ltd., 2022, doi:10.37904/metal.2022.4437.
short: 'L. BAJTOŠOVÁ, O. Grydin, M. STOLBCHENKO, M. Schaper, B. KŘIVSKÁ, R. KRÁLÍK,
M. ŠLAPÁKOVÁ, M. CIESLAR, in: METAL 2022 Conference Proeedings, TANGER Ltd., 2022.'
conference:
end_date: 2022-05-19
location: Brno
name: Metal 2022
start_date: 2022-05-18
date_created: 2023-01-12T09:42:02Z
date_updated: 2023-04-27T16:35:42Z
department:
- _id: '158'
- _id: '321'
doi: 10.37904/metal.2022.4437
keyword:
- Al-Cu-Li-M-Zr-Fe alloy
- twin-roll casting
- phase identification
- ACOM-TEM
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.confer.cz/metal/2022/4437-phase-identification-in-twin-roll-cast-al-li-alloys
oa: '1'
publication: METAL 2022 Conference Proeedings
publication_identifier:
issn:
- 2694-9296
publication_status: published
publisher: TANGER Ltd.
quality_controlled: '1'
status: public
title: Phase identification in twin-roll cast Al-Li alloys
type: conference
user_id: '43720'
year: '2022'
...
---
_id: '32188'
abstract:
- lang: eng
text: The additive manufacturing (AM) of innovative lattice structures with
unique mechanical properties has received widespread attention due to the capability
of AM processes to fabricate freeform and intricate structures. The most common
way to characterize the additively manufactured lattice structures is via the
uniaxial compression test. However, although there are many applications for which
lattice structures are designed for bending (e.g., sandwich panels cores and some
medical implants), limited attention has been paid toward investigating the flexural
behavior of metallic AM lattice structures with tunable internal architectures.
The purpose of this study was to experimentally investigate the flexural behavior
of AM Ti-6Al-4V lattice structures with graded density and hybrid Poisson’s ratio
(PR). Four configurations of lattice structure beams with positive, negative,
hybrid PR, and a novel hybrid PR with graded density were manufactured via the
laser powder bed fusion (LPBF) AM process and tested under four-point bending.
The manufacturability, microstructure, micro-hardness, and flexural properties
of the lattices were evaluated. During the bending tests, different failure mechanisms
were observed, which were highly dependent on the type of lattice geometry. The
best response in terms of absorbed energy was obtained for the functionally graded
hybrid PR (FGHPR) structure. Both the FGHPR and hybrid PR (HPR) structured showed
a 78.7% and 62.9% increase in the absorbed energy, respectively, compared to the
positive PR (PPR) structure. This highlights the great potential for FGHPR lattices
to be used in protective devices, load-bearing medical implants, and energy-absorbing
applications.
article_number: '4072'
author:
- first_name: Osama
full_name: Abdelaal, Osama
last_name: Abdelaal
- first_name: Florian
full_name: Hengsbach, Florian
last_name: Hengsbach
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
citation:
ama: Abdelaal O, Hengsbach F, Schaper M, Hoyer K-P. LPBF Manufactured Functionally
Graded Lattice Structures Obtained by Graded Density and Hybrid Poisson’s Ratio.
Materials. 2022;15(12). doi:10.3390/ma15124072
apa: Abdelaal, O., Hengsbach, F., Schaper, M., & Hoyer, K.-P. (2022). LPBF Manufactured
Functionally Graded Lattice Structures Obtained by Graded Density and Hybrid Poisson’s
Ratio. Materials, 15(12), Article 4072. https://doi.org/10.3390/ma15124072
bibtex: '@article{Abdelaal_Hengsbach_Schaper_Hoyer_2022, title={LPBF Manufactured
Functionally Graded Lattice Structures Obtained by Graded Density and Hybrid Poisson’s
Ratio}, volume={15}, DOI={10.3390/ma15124072},
number={124072}, journal={Materials}, publisher={MDPI AG}, author={Abdelaal, Osama
and Hengsbach, Florian and Schaper, Mirko and Hoyer, Kay-Peter}, year={2022} }'
chicago: Abdelaal, Osama, Florian Hengsbach, Mirko Schaper, and Kay-Peter Hoyer.
“LPBF Manufactured Functionally Graded Lattice Structures Obtained by Graded Density
and Hybrid Poisson’s Ratio.” Materials 15, no. 12 (2022). https://doi.org/10.3390/ma15124072.
ieee: 'O. Abdelaal, F. Hengsbach, M. Schaper, and K.-P. Hoyer, “LPBF Manufactured
Functionally Graded Lattice Structures Obtained by Graded Density and Hybrid Poisson’s
Ratio,” Materials, vol. 15, no. 12, Art. no. 4072, 2022, doi: 10.3390/ma15124072.'
mla: Abdelaal, Osama, et al. “LPBF Manufactured Functionally Graded Lattice Structures
Obtained by Graded Density and Hybrid Poisson’s Ratio.” Materials, vol.
15, no. 12, 4072, MDPI AG, 2022, doi:10.3390/ma15124072.
short: O. Abdelaal, F. Hengsbach, M. Schaper, K.-P. Hoyer, Materials 15 (2022).
date_created: 2022-06-27T14:50:27Z
date_updated: 2023-04-27T16:34:46Z
department:
- _id: '9'
- _id: '158'
doi: 10.3390/ma15124072
intvolume: ' 15'
issue: '12'
keyword:
- General Materials Science
language:
- iso: eng
publication: Materials
publication_identifier:
issn:
- 1996-1944
publication_status: published
publisher: MDPI AG
quality_controlled: '1'
status: public
title: LPBF Manufactured Functionally Graded Lattice Structures Obtained by Graded
Density and Hybrid Poisson’s Ratio
type: journal_article
user_id: '43720'
volume: 15
year: '2022'
...
---
_id: '34097'
author:
- first_name: Dietrich
full_name: Voswinkel, Dietrich
id: '52634'
last_name: Voswinkel
- first_name: Jan Andre
full_name: Striewe, Jan Andre
id: '29413'
last_name: Striewe
- first_name: Olexandr
full_name: Grydin, Olexandr
id: '43822'
last_name: Grydin
- first_name: Dennis
full_name: Meinderink, Dennis
id: '32378'
last_name: Meinderink
orcid: 0000-0002-2755-6514
- first_name: Guido
full_name: Grundmeier, Guido
id: '194'
last_name: Grundmeier
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: Voswinkel D, Striewe JA, Grydin O, et al. Co-bonding of carbon fibre-reinforced
epoxy and galvanised steel with laser structured interface for automotive applications.
Advanced Composite Materials. Published online 2022:1-16. doi:10.1080/09243046.2022.2143746
apa: Voswinkel, D., Striewe, J. A., Grydin, O., Meinderink, D., Grundmeier, G.,
Schaper, M., & Tröster, T. (2022). Co-bonding of carbon fibre-reinforced epoxy
and galvanised steel with laser structured interface for automotive applications.
Advanced Composite Materials, 1–16. https://doi.org/10.1080/09243046.2022.2143746
bibtex: '@article{Voswinkel_Striewe_Grydin_Meinderink_Grundmeier_Schaper_Tröster_2022,
title={Co-bonding of carbon fibre-reinforced epoxy and galvanised steel with laser
structured interface for automotive applications}, DOI={10.1080/09243046.2022.2143746},
journal={Advanced Composite Materials}, publisher={Informa UK Limited}, author={Voswinkel,
Dietrich and Striewe, Jan Andre and Grydin, Olexandr and Meinderink, Dennis and
Grundmeier, Guido and Schaper, Mirko and Tröster, Thomas}, year={2022}, pages={1–16}
}'
chicago: Voswinkel, Dietrich, Jan Andre Striewe, Olexandr Grydin, Dennis Meinderink,
Guido Grundmeier, Mirko Schaper, and Thomas Tröster. “Co-Bonding of Carbon Fibre-Reinforced
Epoxy and Galvanised Steel with Laser Structured Interface for Automotive Applications.”
Advanced Composite Materials, 2022, 1–16. https://doi.org/10.1080/09243046.2022.2143746.
ieee: 'D. Voswinkel et al., “Co-bonding of carbon fibre-reinforced epoxy
and galvanised steel with laser structured interface for automotive applications,”
Advanced Composite Materials, pp. 1–16, 2022, doi: 10.1080/09243046.2022.2143746.'
mla: Voswinkel, Dietrich, et al. “Co-Bonding of Carbon Fibre-Reinforced Epoxy and
Galvanised Steel with Laser Structured Interface for Automotive Applications.”
Advanced Composite Materials, Informa UK Limited, 2022, pp. 1–16, doi:10.1080/09243046.2022.2143746.
short: D. Voswinkel, J.A. Striewe, O. Grydin, D. Meinderink, G. Grundmeier, M. Schaper,
T. Tröster, Advanced Composite Materials (2022) 1–16.
date_created: 2022-11-17T08:05:26Z
date_updated: 2023-04-27T16:36:14Z
department:
- _id: '9'
- _id: '149'
- _id: '321'
- _id: '158'
doi: 10.1080/09243046.2022.2143746
keyword:
- Mechanical Engineering
- Mechanics of Materials
- Ceramics and Composites
language:
- iso: eng
page: 1-16
publication: Advanced Composite Materials
publication_identifier:
issn:
- 0924-3046
- 1568-5519
publication_status: published
publisher: Informa UK Limited
quality_controlled: '1'
status: public
title: Co-bonding of carbon fibre-reinforced epoxy and galvanised steel with laser
structured interface for automotive applications
type: journal_article
user_id: '43720'
year: '2022'
...
---
_id: '30519'
author:
- first_name: Sudipta
full_name: Pramanik, Sudipta
last_name: Pramanik
- first_name: Frederik
full_name: Tasche, Frederik
last_name: Tasche
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: 'Pramanik S, Tasche F, Hoyer K-P, Schaper M. Orientation-Dependent Indentation
Behaviour of Additively Manufactured FeCo Sample: A Quasi In-Situ Study. Magnetism.
2022;2:88-104. doi:10.3390/magnetism2020007'
apa: 'Pramanik, S., Tasche, F., Hoyer, K.-P., & Schaper, M. (2022). Orientation-Dependent
Indentation Behaviour of Additively Manufactured FeCo Sample: A Quasi In-Situ
Study. Magnetism, 2, 88–104. https://doi.org/10.3390/magnetism2020007'
bibtex: '@article{Pramanik_Tasche_Hoyer_Schaper_2022, title={Orientation-Dependent
Indentation Behaviour of Additively Manufactured FeCo Sample: A Quasi In-Situ
Study}, volume={2}, DOI={10.3390/magnetism2020007},
journal={Magnetism}, publisher={MDPI}, author={Pramanik, Sudipta and Tasche, Frederik
and Hoyer, Kay-Peter and Schaper, Mirko}, year={2022}, pages={88–104} }'
chicago: 'Pramanik, Sudipta, Frederik Tasche, Kay-Peter Hoyer, and Mirko Schaper.
“Orientation-Dependent Indentation Behaviour of Additively Manufactured FeCo Sample:
A Quasi In-Situ Study.” Magnetism 2 (2022): 88–104. https://doi.org/10.3390/magnetism2020007.'
ieee: 'S. Pramanik, F. Tasche, K.-P. Hoyer, and M. Schaper, “Orientation-Dependent
Indentation Behaviour of Additively Manufactured FeCo Sample: A Quasi In-Situ
Study,” Magnetism, vol. 2, pp. 88–104, 2022, doi: 10.3390/magnetism2020007.'
mla: 'Pramanik, Sudipta, et al. “Orientation-Dependent Indentation Behaviour of
Additively Manufactured FeCo Sample: A Quasi In-Situ Study.” Magnetism,
vol. 2, MDPI, 2022, pp. 88–104, doi:10.3390/magnetism2020007.'
short: S. Pramanik, F. Tasche, K.-P. Hoyer, M. Schaper, Magnetism 2 (2022) 88–104.
date_created: 2022-03-25T08:07:15Z
date_updated: 2023-04-27T16:34:57Z
department:
- _id: '9'
- _id: '158'
doi: 10.3390/magnetism2020007
intvolume: ' 2'
language:
- iso: eng
page: 88-104
publication: Magnetism
publication_status: published
publisher: MDPI
quality_controlled: '1'
status: public
title: 'Orientation-Dependent Indentation Behaviour of Additively Manufactured FeCo
Sample: A Quasi In-Situ Study'
type: journal_article
user_id: '43720'
volume: 2
year: '2022'
...
---
_id: '36327'
abstract:
- lang: eng
text: "AbstractWith an innovative optical characterization
method, using high-temperature digital image correlation in combination with thermal
imaging, the local change in strain and change in temperature could be determined
during thermo-mechanical treatment of flat steel specimens. With data obtained
by this optical method, the transformation kinetics for every area of interest
along the whole measuring length of a flat specimen could be analyzed by the generation
of dilatation curves. The benefit of this innovative optical characterization
method compared to a dilatometer test is that the experimental effort for the
design of a tailored component could be strongly reduced to the investigation
of only a few tailored thermo-mechanical processed specimens. Due to the implementation
of a strain and/or temperature gradient within the flat specimen, less metallographic
samples are prepared for hardness analysis and analysis of the microstructural
composition by scanning electron microscopy to investigate the influence of different
process parameters. Compared to performed dilatometer tests in this study, the
optical method obtained comparable results for the transformation start and end
temperatures. For the final design of a part with tailored properties, the optical
method is suitable for a time-efficient material characterization.\r\n
\ Graphical Abstract"
author:
- first_name: Alexander
full_name: Reitz, Alexander
id: '24803'
last_name: Reitz
orcid: 0000-0001-9047-467X
- first_name: Olexandr
full_name: Grydin, Olexandr
id: '43822'
last_name: Grydin
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: 'Reitz A, Grydin O, Schaper M. Optical Detection of Phase Transformations in
Steels: An Innovative Method for Time-Efficient Material Characterization During
Tailored Thermo-mechanical Processing of a Press Hardening Steel. Metallurgical
and Materials Transactions A. 2022;53(8):3125-3142. doi:10.1007/s11661-022-06732-z'
apa: 'Reitz, A., Grydin, O., & Schaper, M. (2022). Optical Detection of Phase
Transformations in Steels: An Innovative Method for Time-Efficient Material Characterization
During Tailored Thermo-mechanical Processing of a Press Hardening Steel. Metallurgical
and Materials Transactions A, 53(8), 3125–3142. https://doi.org/10.1007/s11661-022-06732-z'
bibtex: '@article{Reitz_Grydin_Schaper_2022, title={Optical Detection of Phase Transformations
in Steels: An Innovative Method for Time-Efficient Material Characterization During
Tailored Thermo-mechanical Processing of a Press Hardening Steel}, volume={53},
DOI={10.1007/s11661-022-06732-z},
number={8}, journal={Metallurgical and Materials Transactions A}, publisher={Springer
Science and Business Media LLC}, author={Reitz, Alexander and Grydin, Olexandr
and Schaper, Mirko}, year={2022}, pages={3125–3142} }'
chicago: 'Reitz, Alexander, Olexandr Grydin, and Mirko Schaper. “Optical Detection
of Phase Transformations in Steels: An Innovative Method for Time-Efficient Material
Characterization During Tailored Thermo-Mechanical Processing of a Press Hardening
Steel.” Metallurgical and Materials Transactions A 53, no. 8 (2022): 3125–42.
https://doi.org/10.1007/s11661-022-06732-z.'
ieee: 'A. Reitz, O. Grydin, and M. Schaper, “Optical Detection of Phase Transformations
in Steels: An Innovative Method for Time-Efficient Material Characterization During
Tailored Thermo-mechanical Processing of a Press Hardening Steel,” Metallurgical
and Materials Transactions A, vol. 53, no. 8, pp. 3125–3142, 2022, doi: 10.1007/s11661-022-06732-z.'
mla: 'Reitz, Alexander, et al. “Optical Detection of Phase Transformations in Steels:
An Innovative Method for Time-Efficient Material Characterization During Tailored
Thermo-Mechanical Processing of a Press Hardening Steel.” Metallurgical and
Materials Transactions A, vol. 53, no. 8, Springer Science and Business Media
LLC, 2022, pp. 3125–42, doi:10.1007/s11661-022-06732-z.'
short: A. Reitz, O. Grydin, M. Schaper, Metallurgical and Materials Transactions
A 53 (2022) 3125–3142.
date_created: 2023-01-12T09:30:12Z
date_updated: 2023-04-27T16:39:55Z
department:
- _id: '158'
- _id: '321'
doi: 10.1007/s11661-022-06732-z
intvolume: ' 53'
issue: '8'
keyword:
- Metals and Alloys
- Mechanics of Materials
- Condensed Matter Physics
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://link.springer.com/article/10.1007/s11661-022-06732-z
oa: '1'
page: 3125-3142
publication: Metallurgical and Materials Transactions A
publication_identifier:
issn:
- 1073-5623
- 1543-1940
publication_status: published
publisher: Springer Science and Business Media LLC
quality_controlled: '1'
status: public
title: 'Optical Detection of Phase Transformations in Steels: An Innovative Method
for Time-Efficient Material Characterization During Tailored Thermo-mechanical Processing
of a Press Hardening Steel'
type: journal_article
user_id: '43720'
volume: 53
year: '2022'
...
---
_id: '40154'
abstract:
- lang: eng
text: The development of bioresorbable materials for temporary implantation
enables progress in medical technology. Iron (Fe)-based degradable materials are
biocompatible and exhibit good mechanical properties, but their degradation rate
is low. Aside from alloying with Manganese (Mn), the creation of phases with high
electrochemical potential such as silver (Ag) phases to cause the anodic dissolution
of FeMn is promising. However, to enable residue-free dissolution, the Ag needs
to be modified. This concern is addressed, as FeMn modified with a degradable
Ag-Calcium-Lanthanum (AgCaLa) alloy is investigated. The electrochemical properties
and the degradation behavior are determined via a static immersion test. The local
differences in electrochemical potential increase the degradation rate (low pH
values), and the formation of gaps around the Ag phases (neutral pH values) demonstrates
the benefit of the strategy. Nevertheless, the formation of corrosion-inhibiting
layers avoids an increased degradation rate under a neutral pH value. The complete
bioresorption of the material is possible since the phases of the degradable AgCaLa
alloy dissolve after the FeMn matrix. Cell viability tests reveal biocompatibility,
and the antibacterial activity of the degradation supernatant is observed. Thus,
FeMn modified with degradable AgCaLa phases is promising as a bioresorbable material
if corrosion-inhibiting layers can be diminished.
author:
- first_name: Jan Tobias
full_name: Krüger, Jan Tobias
id: '44307'
last_name: Krüger
orcid: 0000-0002-0827-9654
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Jingyuan
full_name: Huang, Jingyuan
last_name: Huang
- first_name: Viviane
full_name: Filor, Viviane
last_name: Filor
- first_name: Rafael Hernan
full_name: Mateus-Vargas, Rafael Hernan
last_name: Mateus-Vargas
- first_name: Hilke
full_name: Oltmanns, Hilke
last_name: Oltmanns
- first_name: Jessica
full_name: Meißner, Jessica
last_name: Meißner
- first_name: Guido
full_name: Grundmeier, Guido
id: '194'
last_name: Grundmeier
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: Krüger JT, Hoyer K-P, Huang J, et al. FeMn with Phases of a Degradable Ag Alloy
for Residue-Free and Adapted Bioresorbability. Journal of Functional Biomaterials.
2022;13(4):185. doi:10.3390/jfb13040185
apa: Krüger, J. T., Hoyer, K.-P., Huang, J., Filor, V., Mateus-Vargas, R. H., Oltmanns,
H., Meißner, J., Grundmeier, G., & Schaper, M. (2022). FeMn with Phases of
a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability. Journal
of Functional Biomaterials, 13(4), 185. https://doi.org/10.3390/jfb13040185
bibtex: '@article{Krüger_Hoyer_Huang_Filor_Mateus-Vargas_Oltmanns_Meißner_Grundmeier_Schaper_2022,
title={FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted
Bioresorbability}, volume={13}, DOI={10.3390/jfb13040185},
number={4}, journal={Journal of Functional Biomaterials}, publisher={MDPI AG},
author={Krüger, Jan Tobias and Hoyer, Kay-Peter and Huang, Jingyuan and Filor,
Viviane and Mateus-Vargas, Rafael Hernan and Oltmanns, Hilke and Meißner, Jessica
and Grundmeier, Guido and Schaper, Mirko}, year={2022}, pages={185} }'
chicago: 'Krüger, Jan Tobias, Kay-Peter Hoyer, Jingyuan Huang, Viviane Filor, Rafael
Hernan Mateus-Vargas, Hilke Oltmanns, Jessica Meißner, Guido Grundmeier, and Mirko
Schaper. “FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted
Bioresorbability.” Journal of Functional Biomaterials 13, no. 4 (2022):
185. https://doi.org/10.3390/jfb13040185.'
ieee: 'J. T. Krüger et al., “FeMn with Phases of a Degradable Ag Alloy for
Residue-Free and Adapted Bioresorbability,” Journal of Functional Biomaterials,
vol. 13, no. 4, p. 185, 2022, doi: 10.3390/jfb13040185.'
mla: Krüger, Jan Tobias, et al. “FeMn with Phases of a Degradable Ag Alloy for Residue-Free
and Adapted Bioresorbability.” Journal of Functional Biomaterials, vol.
13, no. 4, MDPI AG, 2022, p. 185, doi:10.3390/jfb13040185.
short: J.T. Krüger, K.-P. Hoyer, J. Huang, V. Filor, R.H. Mateus-Vargas, H. Oltmanns,
J. Meißner, G. Grundmeier, M. Schaper, Journal of Functional Biomaterials 13 (2022)
185.
date_created: 2023-01-26T06:39:42Z
date_updated: 2023-04-27T16:39:26Z
department:
- _id: '302'
- _id: '158'
doi: 10.3390/jfb13040185
intvolume: ' 13'
issue: '4'
keyword:
- Biomedical Engineering
- Biomaterials
language:
- iso: eng
page: '185'
publication: Journal of Functional Biomaterials
publication_identifier:
issn:
- 2079-4983
publication_status: published
publisher: MDPI AG
quality_controlled: '1'
status: public
title: FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability
type: journal_article
user_id: '43720'
volume: 13
year: '2022'
...