Improved system identification for simultaneous transmitting and receiving in single transducer applications In single transducer applications it would be desirable if the received electrical signal (echo signal) could be evaluated during transmitting. Thereby it is possible to measure very short distances. There are some solutions to realize this, but they have one limitation which prevents the usage in many industrial application. They need a calibration without an echo. The main problem is that this calibration has to be repeated whenever the process parameters like temperature or acoustic load change. This contribution presents an approach which uses a model identification based on different successive measurements which may include echoes. It is done by an impulse response decomposition followed by a principle component analysis. Results of measurements with sine burst excitation and a reflector in front of the transducer are presented. 141-144 141-144