---
_id: '21696'
abstract:
- lang: eng
text: Theimplementation of additive manufacturing as an industrial manufacturing
process poses extraordinary challenges to companies due to their far-reaching
differences to conventional processes. In addition to the major differences in
the production process, the pre and post process steps in particular also require
a rethinking for companies and their employees. To overcome these challenges and
specifically to assist SMEs in the integration of technologies five industrial
companies are researching together within research project "OptiAMix", funded
by the German Federal Ministry of Education and Research (BMBF) and coordinated
by the Paderborn University. This paper focuses on the development of an optimal
and standardized process chain and its implementation in a general integration
methodology. This enables the standardized integration of additivemanufacturing
in order to create a uniform understanding of the procedures and tasks within
the company for the industrial application of additive manufacturing at an early
stage as well as the full exploitation of its high potentials. Therefore, the
methodology also includes other technology-specific components such as strategic
component selection, decision support for "make or buy" and the implementation
of automated component marking.
author:
- first_name: J.
full_name: Büsching, J.
last_name: Büsching
- first_name: C.
full_name: Lindemann, C.
last_name: Lindemann
- first_name: U.
full_name: Jahnke, U.
last_name: Jahnke
- first_name: A.
full_name: Kruse, A.
last_name: Kruse
- first_name: R.
full_name: Koch, R.
last_name: Koch
citation:
ama: 'Büsching J, Lindemann C, Jahnke U, Kruse A, Koch R. Technology Integration
into Existing Companies. In: 29th Annual International Solid Freeform Fabrication
Symposium. Vol 29. ; 2018:14-31. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2018/002%20TechnologyIntegrationintoExistingCompanies.pdf'
apa: Büsching, J., Lindemann, C., Jahnke, U., Kruse, A., & Koch, R. (2018).
Technology Integration into Existing Companies. In 29th Annual International
Solid Freeform Fabrication Symposium (Vol. 29, pp. 14–31). http://utw10945.utweb.utexas.edu/sites/default/files/2018/002%20TechnologyIntegrationintoExistingCompanies.pdf
bibtex: '@inproceedings{Büsching_Lindemann_Jahnke_Kruse_Koch_2018, title={Technology
Integration into Existing Companies}, volume={29}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2018/002%20TechnologyIntegrationintoExistingCompanies.pdf},
booktitle={29th Annual International Solid Freeform Fabrication Symposium}, author={Büsching,
J. and Lindemann, C. and Jahnke, U. and Kruse, A. and Koch, R.}, year={2018},
pages={14–31} }'
chicago: Büsching, J., C. Lindemann, U. Jahnke, A. Kruse, and R. Koch. “Technology
Integration into Existing Companies.” In 29th Annual International Solid Freeform
Fabrication Symposium, 29:14–31, 2018. http://utw10945.utweb.utexas.edu/sites/default/files/2018/002%20TechnologyIntegrationintoExistingCompanies.pdf.
ieee: J. Büsching, C. Lindemann, U. Jahnke, A. Kruse, and R. Koch, “Technology Integration
into Existing Companies,” in 29th Annual International Solid Freeform Fabrication
Symposium, 2018, vol. 29, pp. 14–31.
mla: Büsching, J., et al. “Technology Integration into Existing Companies.” 29th
Annual International Solid Freeform Fabrication Symposium, vol. 29, 2018,
pp. 14–31, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2018/002%20TechnologyIntegrationintoExistingCompanies.pdf.
short: 'J. Büsching, C. Lindemann, U. Jahnke, A. Kruse, R. Koch, in: 29th Annual
International Solid Freeform Fabrication Symposium, 2018, pp. 14–31.'
date_created: 2021-04-21T07:38:06Z
date_updated: 2022-01-06T06:55:10Z
department:
- _id: '144'
- _id: '219'
- _id: '624'
doi: http://utw10945.utweb.utexas.edu/sites/default/files/2018/002%20TechnologyIntegrationintoExistingCompanies.pdf
intvolume: ' 29'
language:
- iso: eng
page: 14-31
publication: 29th Annual International Solid Freeform Fabrication Symposium
status: public
title: Technology Integration into Existing Companies
type: conference
user_id: '55833'
volume: 29
year: '2018'
...