---
res:
  bibo_abstract:
  - The mechanical properties of thin-walled plastic components are limited. One approach
    to improve the strength or stiffness of these components is to reinforce the thin-walled
    areas with an individually adapted Fused Deposition Modeling structure. Fused
    Deposition Modeling (FDM) is one of the most commonly used additive manufacturing
    processes. This process is characterized by the deposition of a fused, thermoplastic
    filament. Depending on the form of the reinforcement structure, the resulting
    hybrid structure should show higher strength or stiffness. The objective of the
    project is to determine constructive design and process guidelines for FDM structures.
    The FDM structure is to be used as a partial reinforcement for lightweight components
    and be adapted to the respective load conditions. Because of the lightweight application,
    the FDM structure should also have the lowest possible weight. The optimization
    of the FDM parts for different load cases is realized by adapting the design parameters.
    These parameters influence the layer generation and therefore also the inner structure
    of the FDM parts. In preliminary studies, the manufacturing restrictions of the
    FDM process are defined. The specimens are manufactured based on the Design of
    Experiments. To determine the static strength properties, different tests (tensile,
    compression, flexural, torsion and impact) are carried out. The investigations
    show that the filling strategy affects the mechanical properties. As a result
    of the investigations, design and process guidelines for the FDM structures are
    established according to the load conditions.@eng
  bibo_authorlist:
  - foaf_Person:
      foaf_givenName: Elmar
      foaf_name: Moritzer, Elmar
      foaf_surname: Moritzer
      foaf_workInfoHomepage: http://www.librecat.org/personId=20531
  - foaf_Person:
      foaf_givenName: André
      foaf_name: Hirsch, André
      foaf_surname: Hirsch
      foaf_workInfoHomepage: http://www.librecat.org/personId=27599
  - foaf_Person:
      foaf_givenName: Franziska Isabelle
      foaf_name: Bürenhaus, Franziska Isabelle
      foaf_surname: Bürenhaus
      foaf_workInfoHomepage: http://www.librecat.org/personId=41055
  bibo_doi: 10.1063/1.5088314
  bibo_issue: '1'
  bibo_volume: 2065
  dct_date: 2019^xs_gYear
  dct_language: eng
  dct_publisher: AIP Publishing@
  dct_title: Development and Modeling of Design and Process Guidelines for FDM Structures
    for the Partial Reinforcement of Hybrid Structures@
...