---
res:
  bibo_abstract:
  - The design of additively manufactured components requires a rethinking in the
    design process. This is inhibited by a lack of knowledge about additive manufacturing
    technologies. For this reason, a large number of design guidelines have been developed
    in recent years. In their present form the design guidelines are not suitable
    for processing in a software algorithm, since the guidelines have a certain redundancy
    and partly influence each other. This paper describes several steps to consolidate
    the existing guidelines and to prepare them in a way that they can be used in
    a software algorithm for a design check. Therefore, existing guidelines are collected,
    prioritized and quantified with regard to their relevance for a robust production.
    To quantify the guidelines, test specimens are developed, produced and evaluated
    in order to obtain a limit value for the geometric properties. With these limit
    values, quantifiable design guidelines can be applied to designers and software
    tools.@eng
  bibo_authorlist:
  - foaf_Person:
      foaf_givenName: Stefan
      foaf_name: Lammers, Stefan
      foaf_surname: Lammers
      foaf_workInfoHomepage: http://www.librecat.org/personId=13835
  - foaf_Person:
      foaf_givenName: Johannes
      foaf_name: Tominski, Johannes
      foaf_surname: Tominski
  - foaf_Person:
      foaf_givenName: Sebastian
      foaf_name: Magerkohl, Sebastian
      foaf_surname: Magerkohl
      foaf_workInfoHomepage: http://www.librecat.org/personId=28520
  - foaf_Person:
      foaf_givenName: Tobias
      foaf_name: Lieneke, Tobias
      foaf_surname: Lieneke
      foaf_workInfoHomepage: http://www.librecat.org/personId=13956
  - foaf_Person:
      foaf_givenName: Thomas
      foaf_name: Künneke, Thomas
      foaf_surname: Künneke
      foaf_workInfoHomepage: http://www.librecat.org/personId=13226
  - foaf_Person:
      foaf_givenName: Detmar
      foaf_name: Zimmer, Detmar
      foaf_surname: Zimmer
      foaf_workInfoHomepage: http://www.librecat.org/personId=604
  bibo_doi: http://utw10945.utweb.utexas.edu/sites/default/files/2018/046%20DesignGuidelinesforaSoftwareSupportedAdaptat.pdf
  bibo_volume: 29
  dct_date: 2018^xs_gYear
  dct_language: eng
  dct_title: Design Guidelines for a Software-supported Adaptation of Additively Manufactured
    Components with Regard to a Robust Production@
...