---
_id: '22434'
abstract:
- lang: eng
  text: This paper reports on the experimental development and the theoretical analysis
    of the scanning laser epitaxy (SLE) process that is currently being investigated
    and developed at the Georgia Institute of Technology. SLE is a laser-based manufacturing
    process for deposition of equiaxed, directionally solidified and single-crystal
    nickel superalloys onto superalloy substrates through the selective melting and
    re-solidification of superalloy powders. The thermal modeling of the system, done
    in a commercial CFD software package, simulates a heat source moving over a powder
    bed and considers the approximate change in the property values for consolidating
    CMSX-4 nickel superalloy powder. The theoretical melt depth is obtained from the
    melting temperature criteria and the resulting plots are presented alongside matching
    experimental micrographs obtained through cross-sectional metallography. The influence
    of the processing parameters on the microstructural evolution, as evidenced through
    observations made from the micrographs, is discussed. This work is sponsored by
    the Office of Naval Research, through grants N00173-07-1-G031 and N00014-10-1-0526.
author:
- first_name: Johannes
  full_name: Tominski, Johannes
  last_name: Tominski
- first_name: Stefan
  full_name: Lammers, Stefan
  id: '13835'
  last_name: Lammers
- first_name: Christian
  full_name: Wulf, Christian
  last_name: Wulf
- first_name: Detmar
  full_name: Zimmer, Detmar
  id: '604'
  last_name: Zimmer
citation:
  ama: 'Tominski J, Lammers S, Wulf C, Zimmer D. Method for a Software-based Design
    Check of Additively Manufactured Components. In: <i>29th Annual International
    Solid Freeform Fabrication Symposium</i>. Vol 29. ; 2018. doi:<a href="http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf">http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf</a>'
  apa: Tominski, J., Lammers, S., Wulf, C., &#38; Zimmer, D. (2018). Method for a
    Software-based Design Check of Additively Manufactured Components. In <i>29th
    Annual International Solid Freeform Fabrication Symposium</i> (Vol. 29). <a href="http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf">http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf</a>
  bibtex: '@inproceedings{Tominski_Lammers_Wulf_Zimmer_2018, title={Method for a Software-based
    Design Check of Additively Manufactured Components}, volume={29}, DOI={<a href="http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf">http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf</a>},
    booktitle={29th Annual International Solid Freeform Fabrication Symposium}, author={Tominski,
    Johannes and Lammers, Stefan and Wulf, Christian and Zimmer, Detmar}, year={2018}
    }'
  chicago: Tominski, Johannes, Stefan Lammers, Christian Wulf, and Detmar Zimmer.
    “Method for a Software-Based Design Check of Additively Manufactured Components.”
    In <i>29th Annual International Solid Freeform Fabrication Symposium</i>, Vol.
    29, 2018. <a href="http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf">http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf</a>.
  ieee: J. Tominski, S. Lammers, C. Wulf, and D. Zimmer, “Method for a Software-based
    Design Check of Additively Manufactured Components,” in <i>29th Annual International
    Solid Freeform Fabrication Symposium</i>, 2018, vol. 29.
  mla: Tominski, Johannes, et al. “Method for a Software-Based Design Check of Additively
    Manufactured Components.” <i>29th Annual International Solid Freeform Fabrication
    Symposium</i>, vol. 29, 2018, doi:<a href="http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf">http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf</a>.
  short: 'J. Tominski, S. Lammers, C. Wulf, D. Zimmer, in: 29th Annual International
    Solid Freeform Fabrication Symposium, 2018.'
date_created: 2021-06-15T11:10:06Z
date_updated: 2022-01-06T06:55:33Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
doi: http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf
intvolume: '        29'
language:
- iso: eng
publication: 29th Annual International Solid Freeform Fabrication Symposium
status: public
title: Method for a Software-based Design Check of Additively Manufactured Components
type: conference
user_id: '38077'
volume: 29
year: '2018'
...