TY - JOUR AB - Friction-spinning as an innovative incremental forming process enables large degrees of deformation in the field of tube and sheet metal forming due to a self-induced heat generation in the forming zone. This paper presents a new tool and process design with a driven tool for the targeted adjustment of residual stress distributions in the friction-spinning process. Locally adapted residual stress depth distributions are intended to improve the functionality of the friction-spinning workpieces, e.g. by delaying failure or triggering it in a defined way. The new process designs with the driven tool and a subsequent flow-forming operation are investigated regarding the influence on the residual stress depth distributions compared to those of standard friction-spinning process. Residual stress depth distributions are measured with the incremental hole-drilling method. The workpieces (tubular part with a flange) are manufactured using heat-treatable 3.3206 (EN-AW 6060 T6) tubular profiles. It is shown that the residual stress depth distributions change significantly due to the new process designs, which offers new potentials for the targeted adjustment of residual stresses that serve to improve the workpiece properties. AU - Dahms, Frederik AU - Homberg, Werner ID - 32412 JF - Key Engineering Materials KW - Mechanical Engineering KW - Mechanics of Materials KW - General Materials Science SN - 1662-9795 TI - Manufacture of Defined Residual Stress Distributions in the Friction-Spinning Process: Driven Tool and Subsequent Flow-Forming VL - 926 ER -