---
res:
  bibo_abstract:
  - "The state of the art shows that PBF-LB/M offers great potential for pressure-loaded
    parts, with significant weight reductions and simultaneous optimization of flow
    resistance. This study is aimed at applying existing calculation methods for pressure-loaded
    parts to additively manufactured pipe structures, considering the two materials
    EN AC-43000 (3.2381, AlSi10Mg) and AISI 316L (1.4404, X2CrNiMo17-12-2). For this
    purpose, systematic tensile tests are carried out for both materials. In addition,
    a statistical evaluation is performed to determine the design-relevant strength
    characteristics with a survival probability Ps of 97.5 % for both materials in
    the as-built and heat-treated condition.\r\nPipe specimens are manufactured, half
    of which are heat treated, geometrically measured and then subjected to a burst
    pressure test to experimentally determine the failure-critical internal pressure.
    These results are compared with calculated burst pressures. The calculations are
    based on the application-relevant methods identified in this study, considering
    the strength values determined for the respective material condition. This comparison
    is used to assess the suitability of the calculation methods for additively manufactured
    pipe structures, based on the materials investigated.@eng"
  bibo_authorlist:
  - foaf_Person:
      foaf_givenName: Thorsten
      foaf_name: Koers, Thorsten
      foaf_surname: Koers
      foaf_workInfoHomepage: http://www.librecat.org/personId=38077
  - foaf_Person:
      foaf_givenName: Balázs
      foaf_name: Magyar, Balázs
      foaf_surname: Magyar
      foaf_workInfoHomepage: http://www.librecat.org/personId=97759
  - foaf_Person:
      foaf_givenName: Christian
      foaf_name: Bödger, Christian
      foaf_surname: Bödger
      foaf_workInfoHomepage: http://www.librecat.org/personId=93904
  - foaf_Person:
      foaf_givenName: Thomas
      foaf_name: Tröster, Thomas
      foaf_surname: Tröster
      foaf_workInfoHomepage: http://www.librecat.org/personId=553
  bibo_doi: 10.1016/j.ijpvp.2026.105753
  dct_date: 2026^xs_gYear
  dct_isPartOf:
  - http://id.crossref.org/issn/0308-0161
  dct_language: eng
  dct_publisher: Elsevier BV@
  dct_subject:
  - PBF-LB/M
  - Pipe structures
  - Strength assessment
  - Burst pressure test
  - Geometrical deviations
  dct_title: Analytical and experimental determination of the failure-critical pressure
    of pipe structures manufactured by PBF-LB/M@
...