@article{9804, abstract = {{This contribution provides a systematic investigation and performance comparison of different modes of operation for piezoelectric inertia drives. The movement of these motors is classically assumed to consist of steps involving stiction and sliding, resulting in the term ``stick-slip drives''. In the first part of this contribution it has been found that using ideal driving signals, ``slip-slip'' operation without phases of stiction allows very high velocities, while the maximum velocity is limited principally in stick-slip operation. In this part it is shown that slip-slip operation is also suitable for use with real actuators, driven with frequency-limited versions of the ideal signals presented in part I. The motional performance of the motor as well as its wear and the required electric power are investigated for operation with different signals. It is found that for high velocity inertia motors it is recommendable to use actuators with large stroke and to drive them with a signal consisting of two harmonics at a high fundamental frequency, a result that is supported by similar setups implemented experimentally by other authors. Using Lanczos' \sigma factors to calculate the frequency-limited excitation signals instead of standard Fourier series additionally increases the motor performance significantly. The results help motor designers to choose the appropriate mode of operation and to optimise the motor parameters for their individual applications.}}, author = {{Hunstig, Matthias and Hemsel, Tobias and Sextro, Walter}}, journal = {{Sensors and Actuators A: Physical}}, keywords = {{Inertia motor}}, pages = {{79 -- 89}}, title = {{{Stick-slip and slip-slip operation of piezoelectric inertia drives - Part II: Frequency-limited excitation}}}, doi = {{10.1016/j.sna.2012.11.043}}, volume = {{200}}, year = {{2013}}, }