Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).

We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.

17249 Publications


2016 | Journal Article | LibreCat-ID: 21937
Nüske, Feliks, et al. “Variational Tensor Approach for Approximating the Rare-Event Kinetics of Macromolecular Systems.” The Journal of Chemical Physics, 054105, 2016, doi:10.1063/1.4940774.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 22132
Riemer, A., et al. “Materialkennwerte Lasergeschmolzener Werkstoffe.” DVM - Tagung - Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 2016, pp. 161–74.
LibreCat
 

2016 | Conference Paper | LibreCat-ID: 22149
Riemer, A., and H. A. Richard. “Crack Propagation in Additive Manufactured Materials and Structures.” Procedia Structural Integrity, 2016, pp. 1229–36.
LibreCat
 

2016 | Conference Paper | LibreCat-ID: 22194
Josupeit, Stefan, and Hans-Joachim Schmid. “Thermal Properties of Polyamide 12 Powder for Application in Laser Sintering.” International Congress on Particle Technology (PARTEC) , 2016.
LibreCat
 

2016 | Journal Article | LibreCat-ID: 20941
Hoppe, Christian, et al. “Influence of the Surface and Heat Treatment on the Bond Strength of Galvanized Steel/Aluminum Composites Joined by Plastic Deformation.” ADVANCED ENGINEERING MATERIALS, vol. 18, no. 8, 2016, pp. 1371–80, doi:10.1002/adem.201600085.
LibreCat | DOI | WoS
 

2016 | Conference Paper | LibreCat-ID: 22404
Lammers, Stefan, et al. “Additive Manufacturing of a Lightweight Rotor for a Permanent Magnet Synchronous Machine.” EDPC 2016, 2016, doi:10.1109/EDPC.2016.7851312.
LibreCat | DOI
 

2016 | Journal Article | LibreCat-ID: 22416
Brückner, Uwe, et al. “Örtlich Konzentrierte Mehrmotorenantriebssysteme - Ein Lösungsansatz Für Ganzheitlich Modulare Antriebssysteme.” Antriebstechnik - Zeitschrift Für Konstruktion, Entwicklung Und Anwendung von Antrieben Und Steuerungen , vol. 55, no. 3, Vereinigte Fachverlage GmbH, 2016, pp. 84–89.
LibreCat
 

2016 | Conference Paper | LibreCat-ID: 22409
Lieneke, Tobias, et al. “Dimensional Tolerances for Additive Manufacturing: Experimental Investigation of Manufacturing Accuracy for Selective Laser Melting.” ASPE 2016 Summer Topical Meeting, 2016, p. S.9-15.
LibreCat
 

2016 | Conference Paper | LibreCat-ID: 22411
Knoop, Frederick, et al. “Reproducibility of the Dimensional Accuracy - Investigations for FDM.” Summer Topical Meeting 2016, 2016.
LibreCat
 

2016 | Report | LibreCat-ID: 22492
Schadomsky, Magnus Hubert, et al. Verbundprojekt Energieeffiziente Federkraftbremse: Abschlussbericht. Berichtszeitraum: 01.05.2012 - 31.03.2016. 2016, doi:10.2314/GBV:876363400.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 17102
Schmiedel, Theresa, et al. “Identifying and Quantifying Cultural Factors That Matter to the IT Workforce: An Approach Based on Automated Content Analysis.” European Conference on Information Systems, 2016.
LibreCat | Download (ext.)
 

2016 | Journal Article | LibreCat-ID: 22574
Bobzin, K., et al. “(Cr,Al)N/(Cr,Al)ON Oxy-Nitride Coatings Deposited by Hybrid DcMS/HPPMS for Plastics Processing Applications.” Surface and Coatings Technology, 2016, pp. 394–403, doi:10.1016/j.surfcoat.2016.07.093.
LibreCat | DOI
 

2016 | Journal Article | LibreCat-ID: 22567
Hunold, Oliver, et al. “Influence of O2 Exposure on the Interaction between CH4 and Amorphous AlYB14.” Applied Surface Science, 2016, pp. 1165–72, doi:10.1016/j.apsusc.2016.09.092.
LibreCat | DOI
 

2016 | Journal Article | LibreCat-ID: 22675
Böke, Frederik, et al. “Plasma-Enhanced Chemical Vapor Deposition (PE-CVD) Yields Better Hydrolytical Stability of Biocompatible SiOx Thin Films on Implant Alumina Ceramics Compared to Rapid Thermal Evaporation Physical Vapor Deposition (PVD).” ACS Applied Materials & Interfaces, vol. 8, 2016, pp. 17805–16, doi:10.1021/acsami.6b04421.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 15435
Domik, Gitta. “A Data Visualization Course at the University of Paderborn.” Pedagogy Data Visualization, IEEE VIS Workshop, 2016.
LibreCat
 

2016 | Conference Paper | LibreCat-ID: 21728
Heppner, Sabrina, et al. “Adding Atmospheric Scattering and Transparency to a Deferred Rendering Pipeline for Camera Based ADAS Tests.” Informatik 2016, edited by Martin Pinzger and Heinrich Mayr, Gesellschaft für Informatik e.V., 2016, pp. 1591–604.
LibreCat
 

2016 | Journal Article | LibreCat-ID: 21730
Yanaka, K., and T. Yamanouchi. “3D Image Display Courses for Information Media Students.” IEEE Computer Graphics and Applications, vol. 36, no. 2, Editors G. Domik and G. S. Owen, 2016, pp. 68–73, doi:10.1109/MCG.2016.36.
LibreCat | DOI
 

2016 | Journal Article | LibreCat-ID: 22853
Yasakau, K. A., et al. “Influence of Stripping and Cooling Atmospheres on Surface Properties and Corrosion of Zinc Galvanizing Coatings.” Applied Surface Science, 2016, pp. 144–56, doi:10.1016/j.apsusc.2016.07.093.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 22858
Schmidt, Hans Christian, et al. Cold Pressure Welding by Incremental Rolling: Deformation Zone Analysis. 2016, doi:10.1063/1.4963507.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 22872
Westermann, Matthias, et al. “Reference Architecture and Maturity Levels for Cyber-Physical Systems.” 2nd IEEE International Symposium on Systems Engineering 2016, Edinburgh, Scotland, 4. - 5. Okt. 2016, 2016.
LibreCat
 

2016 | Conference Paper | LibreCat-ID: 20826
Koch, Thorsten, et al. “Towards Feature-Based Product Line Engineering of Technical Systems.” 3rd International Conference on System-Integrated Intelligence: New Challenges for Product and Production Engineering (SysInt 2016), edited by Ansgar Trächtler et al., Elsevier, 2016, pp. 447–54, doi:10.1016/j.protcy.2016.08.057.
LibreCat | DOI
 

2016 | Journal Article | LibreCat-ID: 22942
Duc, Huynh Thanh, et al. “Ultrafast Shift and Rectification Photocurrents in GaAs Quantum Wells: Excitation Intensity Dependence and the Importance of Band Mixing.” Physical Review B, 2016, doi:10.1103/physrevb.94.085305.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 23034
Oestersötebier, Felix, et al. “Design and Implementation of Intelligent Control Software for a Dough Kneader.” Proceedings of the 3rd International Conference on System-Integrated Intelligence, Elsevier, 2016.
LibreCat
 

2016 | Conference Paper | LibreCat-ID: 23027
Holtkötter, Jens, et al. “PROFINET-Implementierung Im Rahmen Der Entwicklung Eines Intelligenten, Selbstlernenden Teigkneters.” Virtuelle Instrumente in Der Praxis 2016, VDE Verlag, 2016.
LibreCat
 

2016 | Journal Article | LibreCat-ID: 23053
Renninger, Johannes, and Ansgar Trächtler. “Verbesserte Schätzung von Fahrdynamikgrößen Durch Modellierung Der Fahrwerks-Und Lenkkinematik.” At-Automatisierungstechnik, vol. 64, no. 5, 2016, pp. 346–54.
LibreCat
 

2016 | Journal Article | LibreCat-ID: 23046
Pai, Arathi, et al. “Precision Control of SMA Actuators with a Real Time Model-Based Controller and Extended VSC.” IFAC-PapersOnLine, vol. 49, no. 21, 2016, pp. 66–73.
LibreCat
 

2016 | Conference Paper | LibreCat-ID: 23039
Wang, Shuo, et al. “Disturbance Observer Design for Utilizing of Time-Delayed Vision Measurements in High Dynamic Systems.” Proceedings of the 3rd International Conference on System-Integrated Intelligence, Elsevier, 2016.
LibreCat
 

2016 | Journal Article | LibreCat-ID: 23041
Kohlstedt, Andreas, et al. “Control of a Hydraulic Hexapod for a Hardware-in-the-Loop Axle Test Rig.” At-Automatisierungstechnik, vol. 64, no. 5, 2016, pp. 365–74.
LibreCat
 

2016 | Conference Paper | LibreCat-ID: 23584
Gräßler, Iris, and Xiaojun Yang. “Interdisciplinary Development of Production Systems Using Systems Engineering.” 26th CIRP Design Conference, Procedia CIRP, 2016.
LibreCat
 

2016 | Book Chapter | LibreCat-ID: 23591
Klemp, Eric, and Jens Pottebaum. “Kapitel: Additive Fertigungsverfahren im Kontext von Industrie 4.0.” Handbuch Industrie 4.0: Produktion, Automatisierung und Logistik, Springer, 2016, pp. 1–21, doi:10.1007/978-3-662-45537-1_19-1.
LibreCat | DOI
 

2016 | Journal Article | LibreCat-ID: 23596
Köster, Andreas, et al. “Assessing the Accuracy of Improved Force-Matched Water Models Derived FromAb Initiomolecular Dynamics Simulations.” Journal of Computational Chemistry, 2016, pp. 1828–38, doi:10.1002/jcc.24398.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 21689
Lindemann, C., and R. Koch. “Cost Efficient Design and Planning for Additive Manufacturing Technologies.” 27th Annual International Solid Freeform Fabrication Symposium , vol. 27, 2016, pp. 93–112, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2016/007-Lindemann.pdf.
LibreCat | DOI
 

2016 | Journal Article | LibreCat-ID: 23750
Savelsbergh, Elwin R., et al. “Effects of Innovative Science and Mathematics Teaching on Student Attitudes and Achievement: A Meta-Analytic Study.” Educational Research Review, vol. 19, 2016, pp. 158–72, doi:10.1016/j.edurev.2016.07.003.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 22877
Kage, Martin, et al. “Value Network Design for Innovations.” Proceedings of the 5th ISPIM Innovation Forum, 2016.
LibreCat
 

2016 | Journal Article | LibreCat-ID: 23832
Hüser, Nicole, et al. “A Comparative Study of Different Amine-Based Solvents for CO2-Capture Using the Rate-Based Approach.” Chemical Engineering Science, 2016, pp. 221–31, doi:10.1016/j.ces.2016.06.027.
LibreCat | DOI
 

2016 | Book Chapter | LibreCat-ID: 24075
Klemp, Eric, and Jens Pottebaum. “Additive Fertigungsverfahren Im Kontext von Industrie 4.0.” Handbuch Industrie 4.0 Bd.3, 2016, doi:10.1007/978-3-662-53251-5_19.
LibreCat | DOI
 

2016 | Journal Article | LibreCat-ID: 24652
Düsing, Martin, and Rolf Mahnken. “A Thermodynamic Framework for Coupled Multiphase Ginzburg-Landau/Cahn-Hilliard Systems for Simulation of Lower Bainitic Transformation.” Archive of Applied Mechanics, 2016, pp. 1947–64, doi:10.1007/s00419-016-1161-5.
LibreCat | DOI
 

2016 | Journal Article | LibreCat-ID: 24645
Düsing, Martin, and Rolf Mahnken. “A Thermodynamic Framework for Coupled Multiphase Field and Diffusion Models for Lower Bainite Transformation.” PAMM, 2016, pp. 321–22, doi:10.1002/pamm.201610149.
LibreCat | DOI
 

2016 | Book Chapter | LibreCat-ID: 24657
Mahnken, Rolf. “Gleichgewicht von Balkentragwerken.” Lehrbuch Der Technischen Mechanik - Band 1: Starrkörperstatik, 2016, doi:10.1007/978-3-662-52785-6_9.
LibreCat | DOI
 

2016 | Conference Paper | LibreCat-ID: 24265
Mao, Yanfei, et al. “An All-Transmission-Line 220 GHz Differential LNA in SiGe BiCMOS.” IEEE International Symposium on Radio-Frequency Integration Technology, 2016, doi:10.1109/RFIT.2016.7578132.
LibreCat | DOI
 

2016 | Dissertation | LibreCat-ID: 24897
Leuders, Stefan. Einfluss prozess-induzierter Defekte auf die Ermüdungseigenschaften metallischer Werkstoffe verarbeitet mittels Laserstrahlschmelzen. Düren Verlag GmbH, 2016.
LibreCat | Files available
 

2016 | Bachelorsthesis | LibreCat-ID: 25129
Padalkin, Andreas. Modulbasierte Realisierung Eines Mittels Backpropagation Lernenden Neuronalen Netzes Auf Einem FPGA. 2016.
LibreCat
 

2016 | Book Chapter | LibreCat-ID: 25263
Geierhos, Michaela. “Crawler (Focused / Not Focused).” Encyclopedia {\ "a} the Business Informatics , edited by Norbert Gronau et al., 9th ed., GITO-Verlag, 2016.
LibreCat
 

2016 | Conference Paper | LibreCat-ID: 25319
Laroque, Christoph, et al. “Ein Verfahren Zur Simulationsgest{\"u}tzten Optimierung von Einrichtungsparametern an Werkzeugmaschinen in Cloud-Umgebungen.” Nissen, Volker;Stelzer, Dirk;Straßburger, Steffen;Fischer, Daniel (Hrsg.): Multikonferenz Wirtschaftsinformatik (MKWI) 2016, edited by Volker Nissen et al., vol. 3, Technische Universit{\"a}t Ilmenau, 2016, pp. 1761–72.
LibreCat
 

2016 | Journal Article | LibreCat-ID: 25321
Rehage, Gerald, et al. “Intelligent Work Preparation in the Cloud.” Wt Workshop Technology Online, no. 1 / 2-2016, 2016, pp. 077–82.
LibreCat
 

2016 | Book Chapter | LibreCat-ID: 26228
Mahnken, Rolf. “Einleitung.” Lehrbuch Der Technischen Mechanik - Band 1: Starrkörperstatik, 2016, doi:10.1007/978-3-662-52785-6_1.
LibreCat | DOI
 

2016 | Dissertation | LibreCat-ID: 26242
Anacker, Harald. Instrumentarium für einen lösungsmusterbasierten Entwurf fortgeschrittener mechatronischer Systeme. Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2016.
LibreCat
 

2016 | Dissertation | LibreCat-ID: 26254
Amshoff, Benjamin. Systematik zur musterbasierten Entwicklung technologie-induzierter Geschäftsmodelle. Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2016.
LibreCat
 

2016 | Journal Article | LibreCat-ID: 26329
Heilmann, René, et al. “Harnessing Click Detectors for the Genuine Characterization of Light States.” Scientific Reports, 2016, doi:10.1038/srep19489.
LibreCat | DOI
 

2016 | Journal Article | LibreCat-ID: 26324
Bohmann, M., et al. “Gaussian Entanglement in the Turbulent Atmosphere.” Physical Review A, 2016, doi:10.1103/physreva.94.010302.
LibreCat | DOI
 

Search

Filter Publications

Display / Sort

Citation Style: MLA

Export / Embed