Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
104 Publications
2009 | Book | LibreCat-ID: 21476
Incremental forming of tubes and sheets assisted by friction-induced heating
W. Homberg, D. Hornjak, C. Beerwald, T. Rostek, J. Kunert, D. Wilk, Incremental Forming of Tubes and Sheets Assisted by Friction-Induced Heating, Auerbach, 2009.
LibreCat
W. Homberg, D. Hornjak, C. Beerwald, T. Rostek, J. Kunert, D. Wilk, Incremental Forming of Tubes and Sheets Assisted by Friction-Induced Heating, Auerbach, 2009.
2011 | Journal Article | LibreCat-ID: 21456
High Performance Active Elements for Agricultural Machines Made of Ultra High-Strength Steels
W. Homberg, T. Rostek, Key Engineering Materials (2011) 229–234.
LibreCat
| DOI
W. Homberg, T. Rostek, Key Engineering Materials (2011) 229–234.
2011 | Conference Paper | LibreCat-ID: 21472
Presshärten von Rohren und Profilen mittels formlos fester Stoffe
T. Mennecart, T. Rostek, J. Witulski, A. Brosius, A.E. Takkaya, W. Homberg, (2011).
LibreCat
T. Mennecart, T. Rostek, J. Witulski, A. Brosius, A.E. Takkaya, W. Homberg, (2011).
2011 | Conference Paper | LibreCat-ID: 21474
High Performance Active Elements for Agricultural Machines Made of Ultra High-Strength Steels
W. Homberg, T. Rostek, in: Proceedings. of the 10th International Conference on Technology of Plasticity (ICTP), Springer, Berlin, 2011.
LibreCat
W. Homberg, T. Rostek, in: Proceedings. of the 10th International Conference on Technology of Plasticity (ICTP), Springer, Berlin, 2011.
2012 | Book | LibreCat-ID: 21470
Presshärten von Rohren und Profilen mittels formlos festen Stoffen
A.E. Tekkaya, T. Mennecart, J. Witulski, W. Homberg, T. Rostek, Presshärten von Rohren und Profilen mittels formlos festen Stoffen, Verlag und Vertriebsgesellschaft mbH, Düsseldorf, 2012.
LibreCat
A.E. Tekkaya, T. Mennecart, J. Witulski, W. Homberg, T. Rostek, Presshärten von Rohren und Profilen mittels formlos festen Stoffen, Verlag und Vertriebsgesellschaft mbH, Düsseldorf, 2012.
2013 | Dissertation | LibreCat-ID: 42769
Grundlegende Untersuchung der Prozess- und Werkzeugparameter und ihrer Wechselwirkungen für das thermo-mechanisch unterstützte inkrementelle Umformverfahren des Reib-Drückens
D. Hornjak, Grundlegende Untersuchung der Prozess- und Werkzeugparameter und ihrer Wechselwirkungen für das thermo-mechanisch unterstützte inkrementelle Umformverfahren des Reib-Drückens, 2013.
LibreCat
D. Hornjak, Grundlegende Untersuchung der Prozess- und Werkzeugparameter und ihrer Wechselwirkungen für das thermo-mechanisch unterstützte inkrementelle Umformverfahren des Reib-Drückens, 2013.
2013 | Book | LibreCat-ID: 21469
Hochleistungsaktivelemente für landwirtschaftliche Maschinen aus ultrahochfestem Stahl
W. Homberg, T. Rostek, Hochleistungsaktivelemente für landwirtschaftliche Maschinen aus ultrahochfestem Stahl, Verlag und Vertriebsgesellschaft mbH, Düsseldorf, 2013.
LibreCat
W. Homberg, T. Rostek, Hochleistungsaktivelemente für landwirtschaftliche Maschinen aus ultrahochfestem Stahl, Verlag und Vertriebsgesellschaft mbH, Düsseldorf, 2013.
2013 | Journal Article | LibreCat-ID: 21455
Thermo-Mechanical Hardening of Ultra High-Strength Steels
W. Homberg, T. Rostek, Key Engineering Materials (2013) 133–140.
LibreCat
| DOI
W. Homberg, T. Rostek, Key Engineering Materials (2013) 133–140.
2013 | Conference Paper | LibreCat-ID: 21468
Processing of Ultra High-Strength Steels involving Thermo-mechanical Hardening Effects
W. Homberg, T. Rostek, in: Proc. IDDRG 2013, Zurich, 2013.
LibreCat
W. Homberg, T. Rostek, in: Proc. IDDRG 2013, Zurich, 2013.
2015 | Dissertation | LibreCat-ID: 21464
Ein Beitrag zur Verarbeitung von Dickblech aus utlrahochfesten Stahlwerkstoffen
T. Rostek, Ein Beitrag zur Verarbeitung von Dickblech aus utlrahochfesten Stahlwerkstoffen, Shaker Verlag, Aachen, 2015.
LibreCat
T. Rostek, Ein Beitrag zur Verarbeitung von Dickblech aus utlrahochfesten Stahlwerkstoffen, Shaker Verlag, Aachen, 2015.
2015 | Conference Paper | LibreCat-ID: 21467
Innovative Processing Techniques for the Manufacture of High-Performance Active Elements from Ultra High-Strength Steel Plate
W. Homberg, T. Rostek, in: Proceedings of METEC & 2nd Estad, 2015.
LibreCat
W. Homberg, T. Rostek, in: Proceedings of METEC & 2nd Estad, 2015.
2015 | Conference Paper | LibreCat-ID: 21454
Internal Flow-Turning - An Innovative Technology for the Manufacture of Tailored Tubes
W. Homberg, T. Rostek, E. Wiens, in: M. Merklein, J.R. Duflou, A.G. Leacock, M. Micari, H. Hagenah (Eds.), Key Engineering Materials, Trans Tech Publications Ltd, Zurich, 2015, pp. 65–70.
LibreCat
| DOI
W. Homberg, T. Rostek, E. Wiens, in: M. Merklein, J.R. Duflou, A.G. Leacock, M. Micari, H. Hagenah (Eds.), Key Engineering Materials, Trans Tech Publications Ltd, Zurich, 2015, pp. 65–70.
2016 | Journal Article | LibreCat-ID: 21466
Layered Steel Materials for the Manufacture of Self-Sharpening Cutting Blades
T. Rostek, W. Homberg, International Journal of Material Forming (2016).
LibreCat
T. Rostek, W. Homberg, International Journal of Material Forming (2016).
2017 | Journal Article | LibreCat-ID: 23909
Friction-Spinning – Possibility of Grain Structure Adjustment
B. Lossen, A. Andreiev, W. Homberg, M. Schaper, Procedia Engineering (2017) 1749–1754.
LibreCat
| DOI
B. Lossen, A. Andreiev, W. Homberg, M. Schaper, Procedia Engineering (2017) 1749–1754.
2017 | Conference Paper | LibreCat-ID: 15032
Rubber pad forming - Efficient approach for the manufacturing of complex structured sheet metal blanks for food industry
P. Spoelstra, E. Djakow, W. Homberg, in: 2017.
LibreCat
| DOI
P. Spoelstra, E. Djakow, W. Homberg, in: 2017.
2017 | Conference Paper | LibreCat-ID: 15033
Incremental electrohydraulic forming - A new approach for the manufacture of structured multifunctional sheet metal blanks
E. Djakow, R. Springer, W. Homberg, M. Piper, J. Tran, A. Zibart, E. Kenig, in: 2017.
LibreCat
| DOI
E. Djakow, R. Springer, W. Homberg, M. Piper, J. Tran, A. Zibart, E. Kenig, in: 2017.
2017 | Journal Article | LibreCat-ID: 21449
Locally Graded Steel Materials for Self-Sharpening Cutting Blades
T. Rostek, W. Homberg, Procedia Engineering 207 (2017) 2185–2190.
LibreCat
| DOI
T. Rostek, W. Homberg, Procedia Engineering 207 (2017) 2185–2190.
2017 | Conference Paper | LibreCat-ID: 21452
Development of hybrid directionally reinforced structural parts for lightweight applications
W. Homberg, T. Rostek, M. Schaper, O. Grydin, A. Andreiev, A. Brosius, M. Tulke, 1896 (2017).
LibreCat
| DOI
W. Homberg, T. Rostek, M. Schaper, O. Grydin, A. Andreiev, A. Brosius, M. Tulke, 1896 (2017).
2017 | Conference Paper | LibreCat-ID: 21453
Locally Graded Steel Materials for Self-Sharpening Cutting Blades
T. Rostek, W. Homberg, 207 (2017) 2185–2190.
LibreCat
| DOI
T. Rostek, W. Homberg, 207 (2017) 2185–2190.
2017 | Journal Article | LibreCat-ID: 30259
Internal Flow-Turning – a new approach for the manufacture of tailored tubes with a constant external diameter
E. Wiens, W. Homberg, Procedia Engineering 207 (2017) 1755–1760.
LibreCat
| DOI
E. Wiens, W. Homberg, Procedia Engineering 207 (2017) 1755–1760.
2017 | Conference Paper | LibreCat-ID: 30261
Internal flow-turning – efficient manufacture of load-adapted tubes with a constant external diameter
E. Wiens, W. Homberg, in: Proceedings of the International Conference on Steels in Cars and Trucks SCT 2017, 2017.
LibreCat
E. Wiens, W. Homberg, in: Proceedings of the International Conference on Steels in Cars and Trucks SCT 2017, 2017.
2017 | Journal Article | LibreCat-ID: 30260
Walzen statt drehen
E. Wiens, Bänder Bleche Rohre bbr 2 (2017) 59.
LibreCat
E. Wiens, Bänder Bleche Rohre bbr 2 (2017) 59.
2018 | Conference Paper | LibreCat-ID: 21457
Optimization of Tooling Design for Hot Mandrel Bending of Pipe Elbows
U. Diekmann, W. Homberg, J. Prehm, T. Rostek, N. Schönhoff, D. Tabakajew, A. Trasca, H. Uysal, in: Materials Science Forum, Trans Tech Publications Ltd, 2018, pp. 159–164.
LibreCat
| DOI
U. Diekmann, W. Homberg, J. Prehm, T. Rostek, N. Schönhoff, D. Tabakajew, A. Trasca, H. Uysal, in: Materials Science Forum, Trans Tech Publications Ltd, 2018, pp. 159–164.
2018 | Conference Paper | LibreCat-ID: 21458
Grading Technologies for the Tanufacture of Innovative Cutting Blades
T. Rostek, W. Homberg, in: AIP Conference Proceedings 1960, 100013, AIP Publishing, 2018.
LibreCat
| DOI
T. Rostek, W. Homberg, in: AIP Conference Proceedings 1960, 100013, AIP Publishing, 2018.
2018 | Conference Paper | LibreCat-ID: 21465
Hybride Verbundstrukturen aus Aluminium und Titan für Leichtbauanwendungen
W. Homberg, T. Rostek, M. Schaper, O. Grydin, A. Andreiev, A. Brosius, C. Guilleaume, (2018) 28–33.
LibreCat
W. Homberg, T. Rostek, M. Schaper, O. Grydin, A. Andreiev, A. Brosius, C. Guilleaume, (2018) 28–33.
2018 | Report | LibreCat-ID: 30257
Herstellung innovativer Stahlhalbzeuge mit wanddicke- und festigkeitsveränderlichen Eigenschaften für den Leichtbau durch Innendrückwalzen (IDW)
E. Wiens, W. Homberg, Herstellung innovativer Stahlhalbzeuge mit wanddicke- und festigkeitsveränderlichen Eigenschaften für den Leichtbau durch Innendrückwalzen (IDW), Düsseldorf, 2018.
LibreCat
E. Wiens, W. Homberg, Herstellung innovativer Stahlhalbzeuge mit wanddicke- und festigkeitsveränderlichen Eigenschaften für den Leichtbau durch Innendrückwalzen (IDW), Düsseldorf, 2018.
2018 | Journal Article | LibreCat-ID: 15067
Internal Flow-Turning – extended manufacturing possibilities in tailored tube production
E. Wiens, W. Homberg, MATEC Web of Conferences (2018).
LibreCat
| DOI
E. Wiens, W. Homberg, MATEC Web of Conferences (2018).
2018 | Conference Paper | LibreCat-ID: 16050
LHYBS – Lightweight Design by Novel Hybrid Materials
A.A. Camberg, T. Tröster, T. Heggemann, H. Homberg, M. Schaper, J. Dietrich, W. Bremser, L. Achterberg, M. Kabst, M. Wille, V. Peckhaus, in: 2018.
LibreCat
A.A. Camberg, T. Tröster, T. Heggemann, H. Homberg, M. Schaper, J. Dietrich, W. Bremser, L. Achterberg, M. Kabst, M. Wille, V. Peckhaus, in: 2018.
2018 | Journal Article | LibreCat-ID: 23903
Friction-spinning—Grain structure modification and the impact on stress/strain behaviour
B. Lossen, A. Andreiev, M. Stolbchenko, W. Homberg, M. Schaper, Journal of Materials Processing Technology (2018) 242–250.
LibreCat
| DOI
B. Lossen, A. Andreiev, M. Stolbchenko, W. Homberg, M. Schaper, Journal of Materials Processing Technology (2018) 242–250.
2019 | Journal Article | LibreCat-ID: 21443
Deep drawing of fiber metal laminates for automotive lightweight structures
T. Heggemann, W. Homberg, Composite Structures (2019) 53–57.
LibreCat
| DOI
T. Heggemann, W. Homberg, Composite Structures (2019) 53–57.
2019 | Conference Paper | LibreCat-ID: 15024
Intrinsically lubricated tool inserts for deep drawing applications generated by selective laser melting
F. Bader, F. Hengsbach, K.-P. Hoyer, W. Homberg, M. Schaper, in: PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING: ESAFORM 2019, 2019.
LibreCat
| DOI
F. Bader, F. Hengsbach, K.-P. Hoyer, W. Homberg, M. Schaper, in: PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING: ESAFORM 2019, 2019.
2019 | Journal Article | LibreCat-ID: 15028
Al2O3/ZrO2-8Y2O3 and (Cr,Ti)AlSiN tool coatings to influence the temperature and surface quality in friction-spinning processes
W. Tillmann, A. Fehr, D. Stangier, M. Dildrop, W. Homberg, B. Lossen, D. Hijazi, Production Engineering (2019) 449–457.
LibreCat
| DOI
W. Tillmann, A. Fehr, D. Stangier, M. Dildrop, W. Homberg, B. Lossen, D. Hijazi, Production Engineering (2019) 449–457.
2019 | Dissertation | LibreCat-ID: 15030
Ein Beitrag zur kombinierten (quasi-)statischen und dynamischen Umformung von blechförmigen Halbzeugen
E. Djakow, Ein Beitrag zur kombinierten (quasi-)statischen und dynamischen Umformung von blechförmigen Halbzeugen, Shaker, Düren, 2019.
LibreCat
| DOI
E. Djakow, Ein Beitrag zur kombinierten (quasi-)statischen und dynamischen Umformung von blechförmigen Halbzeugen, Shaker, Düren, 2019.
2019 | Journal Article | LibreCat-ID: 15031
High-Speed Incremental Forming – New Technologies For Flexible Production Of Sheet Metal Parts
M. Linnemann, V. Psyk, E. Djakow, R. Springer, W. Homberg, D. Landgrebe, Procedia Manufacturing (2019) 21–26.
LibreCat
| DOI
M. Linnemann, V. Psyk, E. Djakow, R. Springer, W. Homberg, D. Landgrebe, Procedia Manufacturing (2019) 21–26.
2019 | Journal Article | LibreCat-ID: 15036
Heat transfer enhancement in pillow-plate heat exchangers with dimpled surfaces: A numerical study
M. Piper, A. Zibart, E. Djakow, R. Springer, W. Homberg, E.Y. Kenig, Applied Thermal Engineering (2019) 142–146.
LibreCat
| DOI
M. Piper, A. Zibart, E. Djakow, R. Springer, W. Homberg, E.Y. Kenig, Applied Thermal Engineering (2019) 142–146.
2019 | Dissertation | LibreCat-ID: 42789
Ein Beitrag zur kombinierten (quasi-)statischen und dynamischen Umformung von blechförmigen Halbzeugen
E. Djakow, Ein Beitrag zur kombinierten (quasi-)statischen und dynamischen Umformung von blechförmigen Halbzeugen, 2019.
LibreCat
E. Djakow, Ein Beitrag zur kombinierten (quasi-)statischen und dynamischen Umformung von blechförmigen Halbzeugen, 2019.
2019 | Dissertation | LibreCat-ID: 42810
Simulationsgestützte Analyse und Optimierung der Umformung geschlossener Stahlprofile mittels Hamburger Verfahren
D. Tabakajew, Simulationsgestützte Analyse und Optimierung der Umformung geschlossener Stahlprofile mittels Hamburger Verfahren, 2019.
LibreCat
D. Tabakajew, Simulationsgestützte Analyse und Optimierung der Umformung geschlossener Stahlprofile mittels Hamburger Verfahren, 2019.
2019 | Dissertation | LibreCat-ID: 42809
Ein Beitrag zum stoffschlüssigen Fügen durch plastische Deformation: partielles Kaltpressschweißen durch inkrementelles Walzen
H.C. Schmidt, Ein Beitrag zum stoffschlüssigen Fügen durch plastische Deformation: partielles Kaltpressschweißen durch inkrementelles Walzen, 2019.
LibreCat
H.C. Schmidt, Ein Beitrag zum stoffschlüssigen Fügen durch plastische Deformation: partielles Kaltpressschweißen durch inkrementelles Walzen, 2019.
2019 | Dissertation | LibreCat-ID: 42799
Ein Beitrag zur Herstellung von hybriden Bauteilen mittels Reibdrücken
B. Lossen, Ein Beitrag zur Herstellung von hybriden Bauteilen mittels Reibdrücken, 2019.
LibreCat
B. Lossen, Ein Beitrag zur Herstellung von hybriden Bauteilen mittels Reibdrücken, 2019.
2019 | Conference Paper | LibreCat-ID: 21451
Improved set up strategies for steel strip straightening machines
T. Rostek, W. Homberg, in: AIP Conference Proceedings 2113, 170018, AIP Publishing, 2019.
LibreCat
| DOI
T. Rostek, W. Homberg, in: AIP Conference Proceedings 2113, 170018, AIP Publishing, 2019.
2019 | Conference Paper | LibreCat-ID: 15068
Forming analysis of tailored tubes with an internal contoured wall thickness and external axial ribs manufactured by internal flow-turning
E. Wiens, W. Homberg, in: PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING: ESAFORM 2019, 2019.
LibreCat
| DOI
E. Wiens, W. Homberg, in: PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING: ESAFORM 2019, 2019.
2020 | Journal Article | LibreCat-ID: 21444
Combined Curing and Forming of Fiber Metal Laminates
T. Heggemann, W. Homberg, H. Sapli, Procedia Manufacturing (2020) 36–42.
LibreCat
| DOI
T. Heggemann, W. Homberg, H. Sapli, Procedia Manufacturing (2020) 36–42.
2020 | Conference Paper | LibreCat-ID: 21522
Combined Curing and Deep Drawing of Fiber Metal Laminates to Spherical Hybrid Components
H. Sapli, T. Heggemann, W. Homberg, in: 2020.
LibreCat
H. Sapli, T. Heggemann, W. Homberg, in: 2020.
2020 | Conference Paper | LibreCat-ID: 22965
Microstructural investigation on phase transformation during flow forming of the metastable austenite AISI 304
J. Rozo Vasquez, B. Arian, M. Riepold, W. Homberg, A. Trächtler, F. Walther, in: 54. Metallographie-Tagung, 2020, pp. 75–81.
LibreCat
J. Rozo Vasquez, B. Arian, M. Riepold, W. Homberg, A. Trächtler, F. Walther, in: 54. Metallographie-Tagung, 2020, pp. 75–81.
2020 | Journal Article | LibreCat-ID: 30713
Joining with Versatile Friction-Spun Joint Connectors
T. Rostek, E. Wiens, W. Homberg, Procedia Manufacturing 47 (2020) 395–399.
LibreCat
| DOI
T. Rostek, E. Wiens, W. Homberg, Procedia Manufacturing 47 (2020) 395–399.
2020 | Conference Paper | LibreCat-ID: 21447
Some ideas for the further development of hydroforming process chains
E. Wiens, E. Djakow, W. Homberg, in: Nebu/Nehy 2020, 2020.
LibreCat
E. Wiens, E. Djakow, W. Homberg, in: Nebu/Nehy 2020, 2020.
2021 | Book Chapter | LibreCat-ID: 25448
Experimental and Numerical Investigations into the Influence of the Process Parameters During the Deep Drawing of Fiber Metal Laminates
T. Heggemann, H. Sapli, W. Homberg, in: Forming the Future, Cham, 2021.
LibreCat
| DOI
T. Heggemann, H. Sapli, W. Homberg, in: Forming the Future, Cham, 2021.
2021 | Journal Article | LibreCat-ID: 26191
Improving the Accuracy of Deep Drawn Fiber-Metal Laminate Parts by Preliminary Surface Treatment
D. Voswinkel, H. Sapli, D. Kloidt, T. Heggemann, W. Homberg, O. Grydin, M. Schaper, IOP Conference Series: Materials Science and Engineering (2021).
LibreCat
| DOI
D. Voswinkel, H. Sapli, D. Kloidt, T. Heggemann, W. Homberg, O. Grydin, M. Schaper, IOP Conference Series: Materials Science and Engineering (2021).
2021 | Journal Article | LibreCat-ID: 21633
Innovative Measurement Of Stress Superposed Steel Strip For Straightening Machines
F. Bader, L. Bathelt, E. Djakow, W. Homberg, C. Henke, A. Trächtler, ESAFORM 2021 (2021).
LibreCat
| DOI
F. Bader, L. Bathelt, E. Djakow, W. Homberg, C. Henke, A. Trächtler, ESAFORM 2021 (2021).
2021 | Book Chapter | LibreCat-ID: 23385
Self-optimized, Intelligent Open-Loop-Controlled Steel Strip Straightening Machine for Advanced Formability
F. Bader, L. Bathelt, E. Djakow, W. Homberg, C. Henke, A. Trächtler, in: Forming the Future, Cham, 2021.
LibreCat
| DOI
F. Bader, L. Bathelt, E. Djakow, W. Homberg, C. Henke, A. Trächtler, in: Forming the Future, Cham, 2021.
2021 | Journal Article | LibreCat-ID: 30649
Joining with Friction Spun Joint Connectors – Manufacturing and Analysis
C. Wischer, C. Steinfelder, W. Homberg, A. Brosius, IOP Conference Series: Materials Science and Engineering 1157 (2021) 012007.
LibreCat
| DOI
C. Wischer, C. Steinfelder, W. Homberg, A. Brosius, IOP Conference Series: Materials Science and Engineering 1157 (2021) 012007.
2021 | Journal Article | LibreCat-ID: 30702
A contribution on versatile process chains: joining with adaptive joining elements, formed by friction spinning
C. Wischer, W. Homberg, Production Engineering (2021).
LibreCat
| DOI
C. Wischer, W. Homberg, Production Engineering (2021).
2021 | Journal Article | LibreCat-ID: 21635
Friction-Induced Recycling Process for User-Specific Semi-Finished Product Production
T. Borgert, W. Homberg, Metals (2021).
LibreCat
| DOI
T. Borgert, W. Homberg, Metals (2021).
2021 | Conference Paper | LibreCat-ID: 21477
Cutting Blades for Food Processing Applications Manufactured Using Innovative Spin Forming
T. Rostek, H. Makeieva, W. Homberg, in: G. Daehn, J. Cao, B. Kinsey, A.E. Tekkaya, A. Vivek, Y. Yoshida (Eds.), Proceedings of the 13th International Conference on the Technology of Plasticity, Springer, Cham, Columbus, 2021, pp. 2115–2125.
LibreCat
| DOI
T. Rostek, H. Makeieva, W. Homberg, in: G. Daehn, J. Cao, B. Kinsey, A.E. Tekkaya, A. Vivek, Y. Yoshida (Eds.), Proceedings of the 13th International Conference on the Technology of Plasticity, Springer, Cham, Columbus, 2021, pp. 2115–2125.
2021 | Book Chapter | LibreCat-ID: 22766
Investigations and Improvements in 3D-DIC Optical Residual Stress Analysis—A New Temperature Compensation Method
F. Dahms, W. Homberg, in: Forming the Future, Springer, Cham, 2021, pp. 2249–2259.
LibreCat
| DOI
F. Dahms, W. Homberg, in: Forming the Future, Springer, Cham, 2021, pp. 2249–2259.
2021 | Conference Paper | LibreCat-ID: 30297
Magnetic Barkhausen noise analysis for microstructural effects separation during flow forming of metastable austenite 304L.
J. Rozo Vasquez, B. Arian, M. Riepold, F. Walther, W. Homberg, A. Trächtler, in: Proceedings of the 11th International Workshop NDT in Progress, 2021.
LibreCat
J. Rozo Vasquez, B. Arian, M. Riepold, F. Walther, W. Homberg, A. Trächtler, in: Proceedings of the 11th International Workshop NDT in Progress, 2021.
2021 | Conference Paper | LibreCat-ID: 23465 | 
Forming of metastable austenitic stainless steel tubes with axially graded martensite content by flow-forming
B. Arian, W. Homberg, M. Riepold, A. Trächtler, J. Rozo Vasquez, F. Walther, in: ULiège Library, Liège, 2021.
LibreCat
| Download (ext.)
B. Arian, W. Homberg, M. Riepold, A. Trächtler, J. Rozo Vasquez, F. Walther, in: ULiège Library, Liège, 2021.
2021 | Book Chapter | LibreCat-ID: 30296
Forming of Parts with Locally Defined Mechanical and Ferromagnetic Properties by Flow-Forming
E. Wiens, W. Homberg, B. Arian, K. Möhring, F. Walther, in: Forming the Future, Springer International Publishing, Cham, 2021.
LibreCat
| DOI
E. Wiens, W. Homberg, B. Arian, K. Möhring, F. Walther, in: Forming the Future, Springer International Publishing, Cham, 2021.
2021 | Journal Article | LibreCat-ID: 26082
Joining with versatile joining elements formed by friction spinning
C. Wischer, E. Wiens, W. Homberg, Journal of Advanced Joining Processes 3 (2021).
LibreCat
| DOI
C. Wischer, E. Wiens, W. Homberg, Journal of Advanced Joining Processes 3 (2021).
2021 | Conference (Editor) | LibreCat-ID: 22453
Development of a novel adaptive joining technology employing Friction-Spun Joint Connectors (FSJC)
E. Wiens, C. Wischer, W. Homberg, eds., Development of a Novel Adaptive Joining Technology Employing Friction-Spun Joint Connectors (FSJC), 2021.
LibreCat
| DOI
E. Wiens, C. Wischer, W. Homberg, eds., Development of a Novel Adaptive Joining Technology Employing Friction-Spun Joint Connectors (FSJC), 2021.
2021 | Journal Article | LibreCat-ID: 23469 |
Model approaches for closed-loop property control for flow forming
M. Riepold, B. Arian, J.R. Vasquez, W. Homberg, F. Walther, A. Trächtler, Advances in Industrial and Manufacturing Engineering (2021).
LibreCat
| DOI
| Download (ext.)
M. Riepold, B. Arian, J.R. Vasquez, W. Homberg, F. Walther, A. Trächtler, Advances in Industrial and Manufacturing Engineering (2021).
2022 | Journal Article | LibreCat-ID: 33724
Assessment of mechanical and optical properties of Al 6060 alloy particles by removal of contaminants
P. Vieth, T. Borgert, W. Homberg, G. Grundmeier, Advanced Engineering Materials (2022).
LibreCat
| DOI
P. Vieth, T. Borgert, W. Homberg, G. Grundmeier, Advanced Engineering Materials (2022).
2022 | Journal Article | LibreCat-ID: 34216
Review on mechanical joining by plastic deformation
G. Meschut, M. Merklein, A. Brosius, D. Drummer, L. Fratini, U. Füssel, M. Gude, W. Homberg, P.A.F. Martins, M. Bobbert, M. Lechner, R. Kupfer, B. Gröger, D. Han, J. Kalich, F. Kappe, T. Kleffel, D. Köhler, C.-M. Kuball, J. Popp, D. Römisch, J. Troschitz, C. Wischer, S. Wituschek, M. Wolf, Journal of Advanced Joining Processes 5 (2022).
LibreCat
| DOI
G. Meschut, M. Merklein, A. Brosius, D. Drummer, L. Fratini, U. Füssel, M. Gude, W. Homberg, P.A.F. Martins, M. Bobbert, M. Lechner, R. Kupfer, B. Gröger, D. Han, J. Kalich, F. Kappe, T. Kleffel, D. Köhler, C.-M. Kuball, J. Popp, D. Römisch, J. Troschitz, C. Wischer, S. Wituschek, M. Wolf, Journal of Advanced Joining Processes 5 (2022).
2022 | Journal Article | LibreCat-ID: 29719
Energy saving potentials of an efficient recycling process of different aluminum rejects
T. Borgert, W. Homberg, Energy Reports 8 (2022) 399–404.
LibreCat
| DOI
T. Borgert, W. Homberg, Energy Reports 8 (2022) 399–404.
2022 | Conference Paper | LibreCat-ID: 30292
Hot Spinning of Cutting Blades for Food Industry
D. Engemann, W. Homberg, in: Braga - Portugal, n.d.
LibreCat
| Files available
D. Engemann, W. Homberg, in: Braga - Portugal, n.d.
2022 | Journal Article | LibreCat-ID: 31360
Identification of Requirements for FE Modeling of an Adaptive Joining Technology Employing Friction-Spun Joint Connectors (FSJC)
A. Oesterwinter, C. Wischer, W. Homberg, Metals 12 (2022).
LibreCat
| DOI
A. Oesterwinter, C. Wischer, W. Homberg, Metals 12 (2022).
2022 | Journal Article | LibreCat-ID: 37647
Further Development of an Adaptive Joining Technique Based on Friction Spinning to Produce Pre-Hole-Free Joints
C. Wischer, W. Homberg, Key Engineering Materials 926 (2022) 1468–1478.
LibreCat
| DOI
C. Wischer, W. Homberg, Key Engineering Materials 926 (2022) 1468–1478.
2022 | Journal Article | LibreCat-ID: 30885
Comparative Analysis of Electrohydraulic and Electromagnetic Sheet Metal Forming against the Background of the Application as an Incremental Processing Technology
T. Heggemann, V. Psyk, A. Oesterwinter, M. Linnemann, V. Kräusel, W. Homberg, Metals 12 (2022).
LibreCat
| DOI
T. Heggemann, V. Psyk, A. Oesterwinter, M. Linnemann, V. Kräusel, W. Homberg, Metals 12 (2022).
2022 | Dissertation | LibreCat-ID: 42813
Innendrückwalzen – Ein innovatives Umformverfahren zur inkrementellen Formgebung von wanddickenkonturierten Rohren mit lokal einstellbaren mechanischen Eigenschaften
E. Wiens, Innendrückwalzen – Ein innovatives Umformverfahren zur inkrementellen Formgebung von wanddickenkonturierten Rohren mit lokal einstellbaren mechanischen Eigenschaften, 2022.
LibreCat
E. Wiens, Innendrückwalzen – Ein innovatives Umformverfahren zur inkrementellen Formgebung von wanddickenkonturierten Rohren mit lokal einstellbaren mechanischen Eigenschaften, 2022.
2022 | Journal Article | LibreCat-ID: 32412
Manufacture of Defined Residual Stress Distributions in the Friction-Spinning Process: Driven Tool and Subsequent Flow-Forming
F. Dahms, W. Homberg, Key Engineering Materials 926 (2022) 683–689.
LibreCat
| DOI
F. Dahms, W. Homberg, Key Engineering Materials 926 (2022) 683–689.
2022 | Journal Article | LibreCat-ID: 29357
Manufacture of Defined Residual Stress Distributions in the Friction-Spinning Process: Investigations and Run-to-Run Predictive Control
F. Dahms, W. Homberg, Metals 12 (2022).
LibreCat
| DOI
F. Dahms, W. Homberg, Metals 12 (2022).
2022 | Conference Paper | LibreCat-ID: 30263
Innovative assistance system for setting up a mechatronic straightening machine
L. Bathelt, F. Bader, E. Djakow, C. Henke, A. Trächtler, W. Homberg, in: 2022.
LibreCat
| DOI
L. Bathelt, F. Bader, E. Djakow, C. Henke, A. Trächtler, W. Homberg, in: 2022.
2022 | Conference Paper | LibreCat-ID: 30265
An approach for an innovative 3d steel strip straightening machine for curvature and saber compensation
F. Bader, L. Bathelt, E. Djakow, C. Henke, W. Homberg, A. Trächtler, in: 2022.
LibreCat
| DOI
F. Bader, L. Bathelt, E. Djakow, C. Henke, W. Homberg, A. Trächtler, in: 2022.
2022 | Conference Paper | LibreCat-ID: 33978
Mechatronische Richtapparate: Intelligente Richttechnik von hochfesten Flachdrähten
L. Bathelt, F. Bader, E. Djakow, C. Henke, A. Trächtler, W. Homberg, in: Fachtagung VDI MECHATRONIK 2022 , Darmstadt, 2022, pp. 19–24.
LibreCat
L. Bathelt, F. Bader, E. Djakow, C. Henke, A. Trächtler, W. Homberg, in: Fachtagung VDI MECHATRONIK 2022 , Darmstadt, 2022, pp. 19–24.
2022 | Journal Article | LibreCat-ID: 34000
Coupled microscopic and micromagnetic depth-specific analysis of plastic deformation and phase transformation of metastable austenitic steel AISI 304L by flow forming
J. Rozo Vasquez, H. Kanagarajah, B. Arian, L. Kersting, W. Homberg, A. Trächtler, F. Walther, Practical Metallography 59 (2022) 660–675.
LibreCat
| DOI
J. Rozo Vasquez, H. Kanagarajah, B. Arian, L. Kersting, W. Homberg, A. Trächtler, F. Walther, Practical Metallography 59 (2022) 660–675.
2022 | Journal Article | LibreCat-ID: 33999
Innovative Online Measurement and Modelling Approach for Property-Controlled Flow Forming Processes
L. Kersting, B. Arian, J.R. Vasquez, A. Trächtler, W. Homberg, F. Walther, Key Engineering Materials 926 (2022) 862–874.
LibreCat
| DOI
L. Kersting, B. Arian, J.R. Vasquez, A. Trächtler, W. Homberg, F. Walther, Key Engineering Materials 926 (2022) 862–874.
2022 | Conference Paper | LibreCat-ID: 36563
Soft sensor concept for micromagnetic depth-specific analysis of phase transformation during flow forming of AISI 304L steel.
J. Rozo Vasquez, F. Walther, B. Arian, W. Homberg, L. Kersting, A. Trächtler, in: Proceedings of the 14th International Conference on Barkhausen Noise and Micromagnetic Testing, 2022.
LibreCat
J. Rozo Vasquez, F. Walther, B. Arian, W. Homberg, L. Kersting, A. Trächtler, in: Proceedings of the 14th International Conference on Barkhausen Noise and Micromagnetic Testing, 2022.
2022 | Book | LibreCat-ID: 36412
Echtzeitfähige Modellierung eines innovativen Drückwalzprozesses für die eigenschaftsgeregelte Herstellung gradierter Bauteile.
L. Kersting, A. Trächtler, B. Arian, W. Homberg, J. Rozo Vasquez, F. Walther, Echtzeitfähige Modellierung Eines Innovativen Drückwalzprozesses Für Die Eigenschaftsgeregelte Herstellung Gradierter Bauteile., Diedrich, Magdeburg, 2022.
LibreCat
L. Kersting, A. Trächtler, B. Arian, W. Homberg, J. Rozo Vasquez, F. Walther, Echtzeitfähige Modellierung Eines Innovativen Drückwalzprozesses Für Die Eigenschaftsgeregelte Herstellung Gradierter Bauteile., Diedrich, Magdeburg, 2022.
2022 | Dissertation | LibreCat-ID: 30255
Innendrückwalzen – Ein innovatives Umformverfahren zur inkrementellen Formgebung von wanddickenkonturierten Rohren mit lokal einstellbaren mechanischen Eigenschaften
E. Wiens, Innendrückwalzen – Ein Innovatives Umformverfahren Zur Inkrementellen Formgebung von Wanddickenkonturierten Rohren Mit Lokal Einstellbaren Mechanischen Eigenschaften, Shaker, Düren, 2022.
LibreCat
E. Wiens, Innendrückwalzen – Ein Innovatives Umformverfahren Zur Inkrementellen Formgebung von Wanddickenkonturierten Rohren Mit Lokal Einstellbaren Mechanischen Eigenschaften, Shaker, Düren, 2022.
2022 | Conference Paper | LibreCat-ID: 34001 |
Produktkennzeichnung durch lokal definierte Einstellung von ferromagnetischen Eigenschaften beim Drückwalzen von metastabilen Stahlwerkstoffen
B. Arian, W. Homberg, L. Kersting, A. Trächtler, J. Rozo Vasquez, in: 36. Aachener Stahlkolloquium – Umformtechnik “Ideen Form Geben“, Aachen, 2022, pp. 333–347.
LibreCat
| Download (ext.)
B. Arian, W. Homberg, L. Kersting, A. Trächtler, J. Rozo Vasquez, in: 36. Aachener Stahlkolloquium – Umformtechnik “Ideen Form Geben“, Aachen, 2022, pp. 333–347.
2022 | Conference Paper | LibreCat-ID: 34003 |
A flow forming process model to predict workpiece properties in AISI 304L
B. Arian, A. Oesterwinter, W. Homberg, J. Rozo Vasquez, F. Walther, L. Kersting, A. Trächtler, in: 19th Int. Conference on Metal Forming 2022, 2022.
LibreCat
| Download (ext.)
B. Arian, A. Oesterwinter, W. Homberg, J. Rozo Vasquez, F. Walther, L. Kersting, A. Trächtler, in: 19th Int. Conference on Metal Forming 2022, 2022.
2023 | Conference Paper | LibreCat-ID: 44036
Analysis of temperature effect on strength and microstructure in friction induced recycling process (FIRP)
T. Borgert, W. Homberg, in: Materials Research Proceedings, Materials Research Forum LLC, 2023.
LibreCat
| DOI
T. Borgert, W. Homberg, in: Materials Research Proceedings, Materials Research Forum LLC, 2023.
2023 | Conference Paper | LibreCat-ID: 44035
Energy and Resource-efficient Forming of Gas Cylinders by Friction-Spinning
F. Dahms, W. Homberg, in: Materials Research Proceedings, Materials Research Forum LLC, 2023.
LibreCat
| Files available
| DOI
F. Dahms, W. Homberg, in: Materials Research Proceedings, Materials Research Forum LLC, 2023.
2023 | Conference Paper | LibreCat-ID: 43044
Proof of concept for incremental sheet metal forming by means of electromagnetic and electrohydraulic high-speed forming
M. Holzmüller, M. Linnemann, W. Homberg, V. Psyk, V. Kräusel, J. Kroos, in: Materials Research Proceedings, Materials Research Forum LLC, 2023, pp. 11–18.
LibreCat
| DOI
M. Holzmüller, M. Linnemann, W. Homberg, V. Psyk, V. Kräusel, J. Kroos, in: Materials Research Proceedings, Materials Research Forum LLC, 2023, pp. 11–18.
2023 | Journal Article | LibreCat-ID: 43045
Investigation of Pressure Fields Generated by Two Simultaneous Discharges in Liquid Initiated by Wires
M. Knyazyev, M. Holzmüller, W. Homberg, Journal of Manufacturing and Materials Processing 7 (2023).
LibreCat
| DOI
M. Knyazyev, M. Holzmüller, W. Homberg, Journal of Manufacturing and Materials Processing 7 (2023).
2023 | Book Chapter | LibreCat-ID: 46691
Analysis and Modelling of the Deformation in the Manufacture of Flange-Contours by the Combined Friction-Spinning and Flow-Forming Process
F. Dahms, W. Homberg, in: Lecture Notes in Mechanical Engineering, Springer Nature Switzerland, 2023.
LibreCat
| DOI
| Download (ext.)
F. Dahms, W. Homberg, in: Lecture Notes in Mechanical Engineering, Springer Nature Switzerland, 2023.
2023 | Journal Article | LibreCat-ID: 46483
Investigations on the Influences of the Thermomechanical Manufacturing of Aluminium Auxiliary Joining Elements
T. Borgert, M. Henke, W. Homberg, Journal of Manufacturing and Materials Processing 7 (2023).
LibreCat
| DOI
T. Borgert, M. Henke, W. Homberg, Journal of Manufacturing and Materials Processing 7 (2023).
2023 | Book Chapter | LibreCat-ID: 46752
Friction-Induced Recycled Aluminium Semi-finished Products in Thermo-mechanical Joining Technology
T. Borgert, W. Homberg, in: Lecture Notes in Mechanical Engineering, Springer Nature Switzerland, Cham, 2023.
LibreCat
| DOI
T. Borgert, W. Homberg, in: Lecture Notes in Mechanical Engineering, Springer Nature Switzerland, Cham, 2023.
2023 | Conference Abstract | LibreCat-ID: 28941
Numerische Untersuchung von Oberflächenstrukturierung zur Erhöhung der Effizienz von Kissenplatten-Wärmeübertragern
R. Afsahnoudeh, M. Holzmüller, F. Bader, W. Homberg, E.Y. Kenig, in: 2023.
LibreCat
R. Afsahnoudeh, M. Holzmüller, F. Bader, W. Homberg, E.Y. Kenig, in: 2023.
2023 | Journal Article | LibreCat-ID: 44312
Echtzeitfähige Modellierung eines innovativen Drückwalzprozesses für die eigenschaftsgeregelte Bauteilfertigung
L. Kersting, B. Arian, J. Rozo Vasquez, A. Trächtler, W. Homberg, F. Walther, At - Automatisierungstechnik 71 (2023) 68–81.
LibreCat
| DOI
L. Kersting, B. Arian, J. Rozo Vasquez, A. Trächtler, W. Homberg, F. Walther, At - Automatisierungstechnik 71 (2023) 68–81.
2023 | Conference Paper | LibreCat-ID: 44315
Control strategy for angular gradations by means of the flow forming process
L. Kersting, B. Arian, J. Rozo Vasquez, A. Trächtler, W. Homberg, F. Walther, in: Materials Research Proceedings, Materials Research Forum LLC, 2023.
LibreCat
| DOI
L. Kersting, B. Arian, J. Rozo Vasquez, A. Trächtler, W. Homberg, F. Walther, in: Materials Research Proceedings, Materials Research Forum LLC, 2023.
2023 | Journal Article | LibreCat-ID: 44318
Detection of phase transformation during plastic deformation of metastable austenitic steel AISI 304L by means of X-ray diffraction pattern analysis
J. Rozo Vasquez, B. Arian, L. Kersting, F. Walther, W. Homberg, A. Trächtler, Metals (2023).
LibreCat
J. Rozo Vasquez, B. Arian, L. Kersting, F. Walther, W. Homberg, A. Trächtler, Metals (2023).
2023 | Journal Article | LibreCat-ID: 47536
Potentials of a friction-induced recycling process to improve resource and energy efficiency in manufacturing technology
T. Borgert, D. Milaege, S. Schweizer, W. Homberg, M. Schaper, T. Tröster, International Journal of Material Forming 16 (2023).
LibreCat
| DOI
T. Borgert, D. Milaege, S. Schweizer, W. Homberg, M. Schaper, T. Tröster, International Journal of Material Forming 16 (2023).
2023 | Conference Paper | LibreCat-ID: 44316
Softsensor model of phase transformation during flow forming of metastable austenitic steel AISI 304L
J. Rozo Vasquez, B. Arian, L. Kersting, F. Walther, W. Homberg, A. Trächtler, in: 2023.
LibreCat
J. Rozo Vasquez, B. Arian, L. Kersting, F. Walther, W. Homberg, A. Trächtler, in: 2023.
2023 | Journal Article | LibreCat-ID: 48781 |
Novel Straightening-Machine Design with Integrated Force Measurement for Straightening of High-Strength Flat Wire
L. Bathelt, M. Scurk, E. Djakow, C. Henke, A. Trächtler, Sensors 23 (2023).
LibreCat
| DOI
| Download (ext.)
L. Bathelt, M. Scurk, E. Djakow, C. Henke, A. Trächtler, Sensors 23 (2023).
2023 | Dissertation | LibreCat-ID: 48072
Reibungsinduzierter Prozess zum nutzerindividuellen und energieeffizienten Recycling von Aluminiumschrotten
T. Borgert, Reibungsinduzierter Prozess zum nutzerindividuellen und energieeffizienten Recycling von Aluminiumschrotten, 2023.
LibreCat
| Download (ext.)
T. Borgert, Reibungsinduzierter Prozess zum nutzerindividuellen und energieeffizienten Recycling von Aluminiumschrotten, 2023.
2023 | Conference Paper | LibreCat-ID: 48572
Innovative self-learning disturbance compensation for straightening processes
L. Bathelt, E. Djakow, C. Henke, A. Trächtler, in: Materials Research Proceedings, Materials Research Forum LLC, 2023.
LibreCat
| DOI
L. Bathelt, E. Djakow, C. Henke, A. Trächtler, in: Materials Research Proceedings, Materials Research Forum LLC, 2023.
2023 | Conference Paper | LibreCat-ID: 48001
Neuartiger Ansatz zum Richten von zwei- und dreidimensionalen Fehlern an einem Federdraht
L. Bathelt, E. Djakow, F. Dahms, C. Henke, A. Trächtler, W. Homberg, in: Ilmenauer Federntag 2023: Neueste Erkenntnisse Zu Funktion, Berechnung, Prüfung Und Gestaltung von Federn Und Werkstoffen, ISLE Steuerungstechnik und Leistungselektronik, Ilmenau, Germany, 2023.
LibreCat
L. Bathelt, E. Djakow, F. Dahms, C. Henke, A. Trächtler, W. Homberg, in: Ilmenauer Federntag 2023: Neueste Erkenntnisse Zu Funktion, Berechnung, Prüfung Und Gestaltung von Federn Und Werkstoffen, ISLE Steuerungstechnik und Leistungselektronik, Ilmenau, Germany, 2023.
2023 | Conference Paper | LibreCat-ID: 44314 |
Cryogenic reverse flow forming of AISI 304L
B. Arian, W. Homberg, L. Kersting, A. Trächtler, J. Rozo Vasquez, F. Walther, in: Materials Research Proceedings, Materials Research Forum LLC, 2023.
LibreCat
| DOI
| Download (ext.)
B. Arian, W. Homberg, L. Kersting, A. Trächtler, J. Rozo Vasquez, F. Walther, in: Materials Research Proceedings, Materials Research Forum LLC, 2023.
2023 | Journal Article | LibreCat-ID: 49705 |
Monitoring the evolution of dimensional accuracy and product properties in property-controlled forming processes
S.C. Stebner, B. Arian, J. Martschin, S. Dietrich, M. Feistle, S. Hütter, R. Lafarge, R. Laue, X. Li, C. Schulte, D. Spies, F. Thein, F. Wendler, M. Wrobel, J.R. Vasquez, M. Dölz, S. Münstermann, Electrical Engineering: Systems and Control (2023).
LibreCat
| DOI
| Download (ext.)
S.C. Stebner, B. Arian, J. Martschin, S. Dietrich, M. Feistle, S. Hütter, R. Lafarge, R. Laue, X. Li, C. Schulte, D. Spies, F. Thein, F. Wendler, M. Wrobel, J.R. Vasquez, M. Dölz, S. Münstermann, Electrical Engineering: Systems and Control (2023).