Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
302 Publications
2024 | Dissertation | LibreCat-ID: 52611
C. Dymel, Modellbasierte Entwicklung von Ultraschallwandlern unter der Berücksichtigung von Nichtlinearitäten, vol. 16. Düren: Shaker Verlag, 2024.
LibreCat
| Files available
2024 | Journal Article | LibreCat-ID: 51518
O. K. Aimiyekagbon, A. Bender, T. Hemsel, and W. Sextro, “Diagnostics of Piezoelectric Bending Actuators Subjected to Varying Operating Conditions,” Electronics, vol. 13, no. 3, Art. no. 521, 2024, doi: 10.3390/electronics13030521.
LibreCat
| DOI
2023 | Book Chapter | LibreCat-ID: 51338
J. Schütte and W. Sextro, “Einfluss der Radhubkinematik auf den Reifenverschleiß,” in 20. VDI-Fachtagung Reifen - Fahrwerk - Fahrbahn, vol. 2425, VDI Verlag GmbH, 2023, pp. 165–180.
LibreCat
2023 | Conference Abstract | LibreCat-ID: 51118
C. Scheidemann, T. Hemsel, O. Friesen, L. Claes, and W. Sextro, “Influence of Temperature and Pre-Stress on the Piezoelectric Material Behavior of Ring-Shaped Ceramics,” presented at the International Conference on Functional Materials & Devices 2023 (ICFMD 2023), Incheon, Korea, 2023.
LibreCat
2023 | Conference Abstract | LibreCat-ID: 51117
C. Scheidemann, T. Hemsel, O. Friesen, L. Claes, and W. Sextro, “Influence of Temperature and Pre-Stress on the Piezoelectric Material Behavior of Ring-Shaped Ceramics,” presented at the 7th International Conference on Advanced Electromaterials (ICAE 2023), Jeju, Korea, 2023.
LibreCat
2023 | Conference Abstract | LibreCat-ID: 51119
C. Scheidemann, O. E. C. Hagedorn, T. Hemsel, and W. Sextro, “Experimental Investigation of Bond Formation and Wire Deformation in the Ultrasonic Wire Bonding Process,” presented at the International Conference on Functional Materials & Devices 2023 (ICFMD 2023), Jeju, Korea, 2023.
LibreCat
2023 | Conference Abstract | LibreCat-ID: 47234
B. Sehlmeyer, R. Kampmann, C. Scheidemann, T. Hemsel, and M. Getzlaff, “Burst Mode of Ultrasonic Resonant Oscillations for Stimulation and Destruction of Tumor Cells,” in Frühjahrstagung 2023, Sektion Kondensierte Materie (SKM), Dresden, 2023.
LibreCat
| Files available
2023 | Conference Abstract | LibreCat-ID: 47235
R. Kampmann, B. Sehlmeyer, C. Scheidemann, T. Hemsel, and M. Getzlaff, “Burst Mode Characteristics of an Ultrasonic Transducer for Treatment of Cancer Cells,” in Frühjahrstagung 2023, Sektion Kondensierte Marterie (SKM), Dresden, 2023.
LibreCat
| Files available
2023 | Conference Paper | LibreCat-ID: 47116 | 
O. K. Aimiyekagbon, A. Löwen, A. Bender, L. Muth, and W. Sextro, “Expert-Informed Hierarchical Diagnostics of Multiple Fault Modes of a Spacecraft Propulsion System,” in Proceedings of the Asia Pacific Conference of the PHM Society 2023 , 2023, vol. 4, no. 1, doi: 10.36001/phmap.2023.v4i1.3596.
LibreCat
| DOI
| Download (ext.)
2023 | Conference Paper | LibreCat-ID: 46813 |
M. C. Wohlleben, L. Muth, S. Peitz, and W. Sextro, “Transferability of a discrepancy model for the dynamics of electromagnetic oscillating circuits,” 2023, doi: 10.1002/pamm.202300039.
LibreCat
| DOI
| Download (ext.)
2023 | Journal Article | LibreCat-ID: 44672 |
A. Bender, “Model-based condition monitoring of piezoelectric bending actuators,” Sensors and Actuators A: Physical, vol. 357, Art. no. 114399, 2023, doi: 10.1016/j.sna.2023.114399.
LibreCat
| DOI
| Download (ext.)
2023 | Dissertation | LibreCat-ID: 41970
P. Dunst, Modellierung und Optimierung reibungsbasierter Ultraschall-Pulvertransportprozesse, vol. 14. Shaker, 2023.
LibreCat
| Files available
| Download (ext.)
2023 | Dissertation | LibreCat-ID: 41971
S. Althoff, Predicting the Bond Quality of Heavy Copper Wire Bonds using a Friction Model Approach, vol. 15. Shaker, 2023.
LibreCat
| Files available
| Download (ext.)
2022 | Report | LibreCat-ID: 52045
C. Scheidemann, T. Hemsel, and W. Sextro, Modellbasierte Ermittlung optimaler Prozessparameter für neuartige Ultraschallbondverbindungen. LibreCat University, 2022.
LibreCat
| Files available
| DOI
2022 | Patent | LibreCat-ID: 9980
K. Reinke, A. Bender, T. Meyer, W. Sextro, and J. K. Kimotho, “Patent DE 10 2017 000 926 B4: Gerät mit wenigstens einem elastisch verformbaren Bauteil, insbesondere einem Gummi-Metall-Lager und mit einer Einrichtung zur Feststellung des Beginns einer verschleißbedingten Bauteil-Restnutzungsdauer, sowie Verfahren zur Bestimmung der Bauteil-Restnutzungsdauer.” 2022.
LibreCat
| Files available
2022 | Conference Paper | LibreCat-ID: 34104
C. Scheidemann, O. Kirsch, T. Hemsel, and W. Sextro, “Experimental Investigation of Multidimensional Ultrasonic Heavy Wire Bonding,” 2022, doi: 10.1109/estc55720.2022.9939478.
LibreCat
| DOI
2022 | Newspaper Article | LibreCat-ID: 47159
O. K. Aimiyekagbon, A. Bender, and W. Sextro, “On the applicability of time series features as health indicators for technical systems operating under varying conditions,” Condition Monitor, no. 425, pp. 5–10, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 30371
O. E. C. Hagedorn, M. Broll, O. Kirsch, T. Hemsel, and W. Sextro, “Experimental Investigation of the Influence of different Bond Tool Grooves on the Bond Quality for Ultrasonic Thick Wire Bonding,” in CIPS 2022 - 12th International Conference on Integrated Power Electronics Systems, Berlin, 2022, pp. 138–143.
LibreCat
2022 | Book Chapter | LibreCat-ID: 29727
M. C. Wohlleben, A. Bender, S. Peitz, and W. Sextro, “Development of a Hybrid Modeling Methodology for Oscillating Systems with Friction,” in Machine Learning, Optimization, and Data Science, Cham: Springer International Publishing, 2022.
LibreCat
| DOI
| Download (ext.)
2022 | Dissertation | LibreCat-ID: 34272 |
R. Schemmel, Enhanced process development by simulation of ultrasonic heavy wire bonding, vol. 13. Shaker, 2022.
LibreCat
| Files available
| DOI
| Download (ext.)
2022 | Book Chapter | LibreCat-ID: 33500
T. Hemsel and J. Twiefel, “Piezoelectric Ultrasonic Power Transducers,” in Reference Module in Materials Science and Materials Engineering, Elsevier, 2022.
LibreCat
| DOI
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 29934
L. Muth, C. Noll, and W. Sextro, “Generation of a Reduced, Representative, Virtual Test Drive for Fast Evaluation of Tire Wear by Clustering of Driving Data,” in Advances in Dynamics of Vehicles on Roads and Tracks II - Proceedings of the 27th Symposium of the International Association of Vehicle System Dynamics, IAVSD 2021, Saint Petersburg, Russia, 2022, doi: 10.1007/978-3-031-07305-2_92.
LibreCat
| DOI
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 29293 |
S. Martin, J. Schütte, C. Bäumler, W. Sextro, and T. Tröster, “Identification of joints for a load-adapted shape in a body in white using steady state vehicle simulations,” Forces in Mechanics, vol. 6, Art. no. 100065, 2021, doi: 10.1016/j.finmec.2021.100065.
LibreCat
| DOI
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 27508 |
J. Schütte and W. Sextro, “Tire Wear Reduction Based on an Extended Multibody Rear Axle Model,” Vehicles, pp. 233–256, 2021, doi: 10.3390/vehicles3020015.
LibreCat
| DOI
| Download (ext.)
2021 | Conference Paper | LibreCat-ID: 27111 |
O. K. Aimiyekagbon, L. Muth, M. C. Wohlleben, A. Bender, and W. Sextro, “Rule-based Diagnostics of a Production Line,” in Proceedings of the European Conference of the PHM Society 2021, 2021, vol. 6, no. 1, pp. 527–536, doi: 10.36001/phme.2021.v6i1.3042.
LibreCat
| DOI
| Download (ext.)
2021 | Conference Paper | LibreCat-ID: 22507 |
O. K. Aimiyekagbon, A. Bender, and W. Sextro, “On the applicability of time series features as health indicators for technical systems operating under varying conditions,” presented at the Seventeenth International Conference on Condition Monitoring and Asset Management (CM 2021).
LibreCat
| Files available
2021 | Conference Paper | LibreCat-ID: 22724 |
A. Bender and W. Sextro, “Hybrid Prediction Method for Remaining Useful Lifetime Estimation Considering Uncertainties,” in Proceedings of the European Conference of the PHM Society 2021, 2021, vol. 6, no. 1, doi: https://doi.org/10.36001/phme.2021.v6i1.2843 .
LibreCat
| DOI
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 21436
R. Schemmel, V. Krieger, T. Hemsel, and W. Sextro, “Co-simulation of MATLAB and ANSYS for ultrasonic wire bonding process optimization,” Microelectronics Reliability, vol. 119, p. 114077, 2021, doi: https://doi.org/10.1016/j.microrel.2021.114077.
LibreCat
| DOI
2021 | Dissertation | LibreCat-ID: 34274
P. Eichwald, Prozessgerechte Gestaltung von Werkzeugen auf Basis von Verschleißsimulationen am Beispiel des Ultraschallbondens, vol. 11. Shaker, 2021.
LibreCat
| Files available
2021 | Journal Article | LibreCat-ID: 25046 |
A. Bender, “A Multi-Model-Particle Filtering-Based Prognostic Approach to Consider Uncertainties in RUL Predictions,” Machines, vol. 9, no. 10, Art. no. 210, 2021, doi: 10.3390/machines9100210.
LibreCat
| DOI
| Download (ext.)
2021 | Conference Paper | LibreCat-ID: 25265
D. Dreiling, D. Itner, N. Feldmann, C. Scheidemann, H. Gravenkamp, and B. Henning, “Application and modelling of ultrasonic transducers using 1-3 piezoelectric composites with structured electrodes,” presented at the DAGA 2021 - 47. JAHRESTAGUNG FÜR AKUSTIK, Wien, 2021.
LibreCat
| Files available
2021 | Conference Paper | LibreCat-ID: 27652
O. K. Aimiyekagbon, A. Bender, and W. Sextro, “Extraktion und Selektion geeigneter Merkmale für die Restlebensdauerprognose von technischen Systemen trotz aleatorischen Unsicherheiten ,” in VDI-Berichte 2391, Würzburg, 2021, pp. 197–210.
LibreCat
2020 | Patent | LibreCat-ID: 9981
K. Reinke, A. Bender, T. Meyer, W. Sextro, and J. K. Kimotho, “Patent EP 3 358 332 B1: Verfahren zur Bestimmung des Beginns einer verschleißbedingten Bauteil-Restnutzungsdauer eines elastisch verformbaren Bauteils, als Strukturteil und/oder Lagerteil eines Geräts.” 2020.
LibreCat
| Files available
2020 | Conference Paper | LibreCat-ID: 17810
O. K. Aimiyekagbon, A. Bender, and W. Sextro, “Evaluation of time series forecasting approaches for the reliable crack length prediction of riveted aluminium plates given insufficient data,” in PHM Society European Conference, 2020, vol. 5, no. 1.
LibreCat
2020 | Conference Paper | LibreCat-ID: 17355
R. Schemmel, C. Scheidemann, T. Hemsel, O. Kirsch, and W. Sextro, “Experimental analysis and modelling of bond formation in ultrasonic heavy wire bonding,” in CIPS 2020; 11th International Conference on Integrated Power Electronics Systems, 2020, pp. 1–6.
LibreCat
2020 | Conference Paper | LibreCat-ID: 17706
R. Schemmel, V. Krieger, T. Hemsel, and W. Sextro, “Co-simulation of MATLAB and ANSYS for ultrasonic wire bonding process optimization,” 2020, doi: 10.1109/eurosime48426.2020.9152679.
LibreCat
| DOI
2020 | Dissertation | LibreCat-ID: 41964
T. Kaul, Integrierte Modellierung von Zuverlässigkeit und dynamischem Verhalten mechatronischer Systeme, vol. 10. Shaker, 2020.
LibreCat
| Files available
| DOI
| Download (ext.)
2019 | Conference Paper | LibreCat-ID: 13461 |
T. Kaul, A. Bender, and W. Sextro, “Digital Twin for Reliability Analysis During Design and Operation of Mechatronic Systems,” in Proceedings of the 29th European Safety and Reliability Conference (ESREL2019), Hannover, 2019, no. 29, pp. 2340–2347.
LibreCat
| Download (ext.)
2019 | Conference Paper | LibreCat-ID: 13460 |
A. Bender, L. Schinke, and W. Sextro, “Remaining useful lifetime prediction based on adaptive failure thresholds,” in Proceedings of the 29th European Safety and Reliability Conference (ESREL2019), Hannover, 2019, no. 29, pp. 1262–1269.
LibreCat
| Download (ext.)
2019 | Conference Paper | LibreCat-ID: 15412
R. Schemmel et al., “Impact of multi-dimensional vibration trajectories on quality and failure modes in ultrasonic bonding,” in International Symposium on Microelectronics, Boston, 2019, pp. 509–514, doi: 10.4071/2380-4505-2019.1.000509.
LibreCat
| Files available
| DOI
2019 | Journal Article | LibreCat-ID: 10334
R. Schemmel, T. Hemsel, C. Dymel, M. Hunstig, M. Brökelmann, and W. Sextro, “Using complex multi-dimensional vibration trajectories in ultrasonic bonding and welding,” Sensors and Actuators A: Physical, vol. 295, pp. 653–662, 2019, doi: 10.1016/j.sna.2019.04.025.
LibreCat
| DOI
2019 | Dissertation | LibreCat-ID: 10003
C. Sprock, Zeiteffiziente messtechnische Analyse glatt-nichtlinearen Schwingverhaltens dynamischer Strukturen. Shaker, 2019.
LibreCat
2019 | Dissertation | LibreCat-ID: 10001
S. Kohl, Analyse der Reibleistungsverteilung im Reifenlatsch unter Berücksichtigung der Fahrwerkdynamik eines Mehrlenkerachssystems zur Bewertung des Reifenverschleißes. Shaker, 2019.
LibreCat
2019 | Dissertation | LibreCat-ID: 10000
P. Bornmann, Modellierung und experimentelle Charakterisierung der Wechselwirkung zwischen Ultraschallwandler und Flüssigkeit in kavitationsbasierten Prozessen. Shaker, 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 15244
O. E. C. Hagedorn, D. Pielsticker, T. Hemsel, and W. Sextro, “Messung hochfrequenter In-Plane-Schwingungen mittels Laservibrometrie in räumlich eingeschränkten Umgebungen,” in 2. VDI-Fachtagung Schwingungen 2019, 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 14852
P. Dunst, P. Bornmann, T. Hemsel, W. Littmann, and W. Sextro, “Atomization of Fluids with Ultrasound,” in Conference Proceedings - The 4th Conference on MicroFluidic Handling Systems (MFHS2019), Enschede, The Netherlands, 2019, pp. 140–143.
LibreCat
| Files available
2019 | Conference Paper | LibreCat-ID: 10255
A. Bender, K. Reinke, and W. Sextro, “Konstruktion und Zustandsüberwachung eines Gummi-Metall-Teils mit integriertem Thermoelement,” in 10. VDI-Fachtagung Schwingungen von Windenergieanlagen 2019, 2019, vol. VDI-Berichte 2346, pp. 241–248.
LibreCat
2019 | Conference Paper | LibreCat-ID: 10257
T. Kaul, J. Hentze, W. Sextro, and I. Gräßler, “Integration von Verlässlichkeitsmodellen der Entwicklung in einen Digitalen Zwilling zur Umsetzung einer vorausschauenden Instandhaltung,” in Fachtagung Mechatronik 2019 Paderborn, 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 10258
P. Dunst, T. Hemsel, P. Bornmann, W. Littmann, and W. Sextro, “Modellbasierte und experimentelle Charakterisierung von intensiven Ultraschall-Stehwellenfeldern für die Zerstäubung hochviskoser Flüssigkeiten,” in DAGA 2019, Rostock, 2019.
LibreCat
2018 | Dissertation | LibreCat-ID: 9994
T. Meyer, Optimization-based reliability control of mechatronic systems. Shaker, 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 9992
C. Dymel et al., “Numerical and statistical investigation of weld formation in a novel two-dimensional copper-copper bonding process,” in (Proceedings of 7th Electronics System-Integration Technology Conference, Dresden, Germany), 2018, pp. 1–6.
LibreCat
2018 | Conference Paper | LibreCat-ID: 9993
C. Dymel, R. Schemmel, T. Hemsel, W. Sextro, M. Brökelmann, and M. Hunstig, “Experimental investigations on the impact of bond process parameters in two-dimensional ultrasonic copper bonding,” in (Proceedings of 8th Electronics IEEE CPMT Symposium Japan (ICSJ 2018), Kyoto, Japan), 2018, pp. 41–44.
LibreCat
2018 | Conference Paper | LibreCat-ID: 9997
R. Schemmel, S. Althoff, W. Sextro, A. Unger, M. Brökelmann, and M. Hunstig, “Effects of different working frequencies on the joint formation in copper wire bonding,” in CIPS 2018 - 10th International Conference on Integrated Power Electronics Systems (CIPS 2018), 2018, pp. 230–235.
LibreCat
2018 | Conference Paper | LibreCat-ID: 9999
A. Unger, M. Hunstig, T. Meyer, M. Brökelmann, and W. Sextro, “Intelligent Production of Wire Bonds using Multi-Objective Optimization – Insights, Opportunities and Challenges,” in In Proceedings of IMAPS 2018 – 51st Symposium on Microelectronics, Pasadena, CA, 2018, 2018, vol. Vol. 2018, No. 1, pp. 000572-000577.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 9987
A. Bender and W. Sextro, “A particle filtering approach for temperature based prognostics,” in Safety and Reliability – Safe Societies in a Changing World, 2018, pp. 1025–1033.
LibreCat
2018 | Conference Paper | LibreCat-ID: 9998
R. Schemmel, T. Hemsel, and W. Sextro, “Numerical and experimental investigations in ultrasonic heavy wire bonding,” in 6th European Conference on Computational Mechanics (ECCM 6), 2018, pp. 1–12.
LibreCat
2018 | Journal Article | LibreCat-ID: 9990
P. Dunst, P. Bornmann, T. Hemsel, W. Littmann, and W. Sextro, “Vibration Assisted Dosing, Mixing and Transport of Dry Fine Powders,” ACTUATOR 2018; 16th International Conference on New Actuators, pp. 142–145, 2018.
LibreCat
2018 | Book | LibreCat-ID: 9995
T. Meyer, T. Kaul, J. K. Kimotho, and W. Sextro, Steigerung der Intelligenz mechatronischer Systeme, vol. Steigerung der Verlässlichkeit technischer Systeme. Springer Nature Switzerland AG. Part of Springer Nature., 2018, pp. 193–213.
LibreCat
2017 | Dissertation | LibreCat-ID: 9979
J. Neuhaus, Multiskalen-Kontaktmodellierung unter Berücksichtigung der Rauigkeit und fluiden Zwischenschichten am Beispiel des Rad-Schiene-Kontakts. Shaker, 2017.
LibreCat
2017 | Dissertation | LibreCat-ID: 9986 |
A. Unger, Modellbasierte Mehrzieloptimierung zur Herstellung von Ultraschall-Drahtbondverbindungen in Leistungshalbleitermodulen. Universität Paderborn, 2017.
LibreCat
| Download (ext.)
2017 | Journal Article | LibreCat-ID: 9973
P. Eichwald et al., “Multi-dimensional Ultrasonic Copper Bonding – New Challenges for Tool Design,” IMAPSource, vol. Vol. 2017, No. 1, 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 9985
W. Sextro, T. Meyer, T. Kaul, and J. K. Kimotho, “Entwicklung verlässlicher, intelligenter Systeme,” in VDI-Berichte 2307–28. Tagung Technische Zuverlässigkeit (TTZ 2017) - Entwicklung und Betrieb zuverlässiger Produkte., 2017, pp. 17–30.
LibreCat
2017 | Conference Paper | LibreCat-ID: 9974
J. Hentze, T. Kaul, I. Grässler, and W. Sextro, “Integrated modeling og behavior and reliability in system development,” in ICED17, 21st International conference on enginieering design, 2017, pp. 385–394.
LibreCat
2017 | Conference Paper | LibreCat-ID: 9969
A. Bender, T. Kaul, and W. Sextro, “Entwicklung eines Condition Monitoring Systems für Gummi-Metall-Elemente,” in Verlagsschriftenreihe des Heinz Nixdorf Instituts Band 369, Paderborn, 2017, 2017, pp. 347–358.
LibreCat
2017 | Journal Article | LibreCat-ID: 9972
P. Dunst, T. Hemsel, and W. Sextro, “Analysis of pipe vibration in an ultrasonic powder transportationsystem,” elsevier, vol. Sensors and Actuators A 263, pp. 733–736, 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 9983
S. Schulze, W. Sextro, and K. Kister, “Model based optimization of dynamics in adaptive headlamps,” in Proceedings of the 12th International Symposium on Automotive Lighting 2017, 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 9982
R. Schemmel, T. Hemsel, and W. Sextro, “MoRFUS: Mobile Reinigungseinheit für Förderketten basierend auf Ultraschall,” in 43. Deutsche Jahrestagung für Akustik, 2017, pp. 611–614.
LibreCat
2017 | Conference Paper | LibreCat-ID: 9971
A. Bender, W. Sextro, and K. Reinke, “Neuartiges Konzept zur Lebensdauerprognose von Gummi-Metall-Elementen,” in VDI-Berichte 2301, 2017, pp. 49–60.
LibreCat
2017 | Conference Paper | LibreCat-ID: 9970
A. Bender, J. K. Kimotho, S. Kohl, W. Sextro, and K. Reinke, “Modellbasierte Prognose der nutzbaren Restlebensdauer von Gummi-Metall-Elementen,” in 15. Internationale Schienenfahrzeugtagung, 2017, pp. 123–125.
LibreCat
2016 | Dissertation | LibreCat-ID: 9962
J. K. Kimotho, Development and Performance Evaluation of Prognostic Approaches for Technical Systems. Shaker, 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 9960
P. Eichwald et al., “Micro Wear Modeling in Copper Wire Wedge Bonding,” in IEEE CPMT Symposium Japan, 2016, 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 9968
A. Unger et al., “Validated Simulation of the Ultrasonic Wire Bonding Process,” in Wear Modeling in Copper Wire Wedge Bonding. IEEE CPMT Symposium Japan, 2016, 2016, pp. 251–254.
LibreCat
2016 | Journal Article | LibreCat-ID: 9957
M. Brökelmann et al., “Kupferbondverbindungen intelligent herstellen,” wt-online, vol. 7/8, pp. 512–519, 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 9961
T. Kaul, T. Meyer, and W. Sextro, “Modeling of Complex Redundancy in Technical Systems with Bayesian Networks,” in Proceedings of the Third European Conference of the Prognostics and Health Management Society 2016, 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 9964
C. Lessmeier, J. K. Kimotho, D. Zimmer, and W. Sextro, “Condition Monitoring of Bearing Damage in Electromechanical Drive Systems by Using Motor Current Signals of Electric Motors: A Benchmark Data Set for Data-Driven Classification,” in European Conference of the Prognostics and Health Management Society, 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 9967
S. Schulze, W. Sextro, and S. Kohl, “Using Adequate Reduced Models for Flexible Multibody Systems of Automotive Mechatronic Systems,” in 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AiGEV) Malaysia 2016, 2016, pp. 1–11.
LibreCat
2016 | Conference Paper | LibreCat-ID: 9963
S. Kohl, W. Sextro, and S. Schulze, “Aspects of Flexible Viscoelastic Suspension Modeling for Frictional Rolling Contact Analysis using ADAMS,” in The 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AiGEV 2016), Cyberjaya, Malaysia, 2016., 2016, pp. 1–12.
LibreCat
2015 | Dissertation | LibreCat-ID: 9953
C. Sondermann-Woelke, Entwurf und Anwendung einer erweiterten Zustandsüberwachung zur Verlässlichkeitssteigerung selbstoptimierender Systeme. Shaker, 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 9950
T. Meyer, J. K. Kimotho, and W. Sextro, “Anforderungen an Condition-Monitoring-Verfahren zur Nutzung im zuverläsigkeitsgeregelten Betrieb adaptiver Systeme,” in 27. Tagung Technische Zuverlässigkeit (TTZ 2015) - Entwicklung und Betrieb zuverlässiger Produkte, 2015, no. 2260, pp. 111–122.
LibreCat
2015 | Conference Paper | LibreCat-ID: 9945
T. Kaul, T. Meyer, and W. Sextro, “Integrierte Modellierung der Dynamik und der Verlässlichkeit komplexer mechatronischer Systeme,” in 10. Paderborner Workshop Entwurf mechatronischer Systeme, 2015, pp. 101–112.
LibreCat
2015 | Conference Paper | LibreCat-ID: 9952
F. Schulte, J. Neuhaus, and W. Sextro, “A Mechanical Model for the Dynamical Contact of Elastic Rough Bodies with Viscoelastic Properties,” in Proceedings of ICoEV 2015 International Conference on Engineering Vibration, 2015, pp. 1109–1117.
LibreCat