Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
40 Publications
2017 | Book Chapter | LibreCat-ID: 23759
Menge, Dennis, et al. “Herstellbarkeit und mechanische Charakterisierung von lasergesinterten Gitterstrukturen.” Additive Fertigung von Bauteilen und Strukturen, edited by Hans Albert Richard et al., Springer Vieweg, 2017, pp. 105–20, doi:10.1007/978-3-658-17780-5.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 22110
Taube, A. “Mechanische Und Mikrostrukturellen Eigenschaften Additiv Hergestellter Gitterstrukturen .” Hannover Messe Industrie, 2017, Hannover, 2017.
LibreCat
2017 | Book | LibreCat-ID: 22112
Brüggemann, J. P., et al. “Entwicklung von Fahrradtretkurbelsystemen Mittels Additiver Fertigung.” Additive Fertigung von Bauteilen Und Strukturen – Neue Erkenntnisse Und Praxisbeispiele, 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 22119
Bauer, B., et al. “Methods for Crack Length Measurement for the Determination of Fracture Mechanical Parameters of Additive Manufactured Plastics.” 14th International Conference on Fracture, vol. 14, 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 22127
Bauer, B., et al. “Risslängenmessung in Additiv Gefertigten Kunststoffproben Auf Basis von Steifigkeitsänderungen Infolge Ermüdungswachstum.” DVM - Tagung - Additiv Gefertigte Bauteile Und Strukturen, 2017, pp. 77–88.
LibreCat
2017 | Conference Paper | LibreCat-ID: 22131
Reschetnik, W., et al. “Bruchmechanische Charakterisierung von Laserstrahlgeschmolzenen Werkstoffen.” DVM - Tagung - Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 2017, pp. 147–56.
LibreCat
2017 | Conference Paper | LibreCat-ID: 22133
Brüggemann, J. P., et al. “Optimierung Der Werkstoffeigenschaften von Selektiv Lasergeschmolzenen Aluminium 7075.” DVM - Tagung - Bruchmechanische Werkstoff- Und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden Und Anwendungen, Deutscher Verband Für Materialforschung Und -Prüfung e.V., 2017, pp. 11–20.
LibreCat
2017 | Conference Paper | LibreCat-ID: 22134
Risse, L., et al. “Strukturoptimierung von Kurzschaft-Hüftendoprothesen Durch Den Einsatz Der Additiven Fertigung.” DVM - Tagung - Zuverlässigkeit von Implataten Und Biostrukturen, 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 22135
Brüggemann, J. P., et al. “Vergleich Zweier Optimierungsstrategien Am Beispiel Additiv Gefertigter Rennradvorbauten.” DVM Tagung - Additiv Gefertigte Bauteile Und Strukturen, 2017, pp. 49–66.
LibreCat
2017 | Conference Paper | LibreCat-ID: 22136
Bauer, B., et al. “Konzepte Zur Risslängenmessung an Additive Gefertigten Kunststoffen .” DVM Tagung - Bruchmechanische Werkstoff- Und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden Und Anwendungen, 2017, pp. 21–30.
LibreCat
2017 | Conference Paper | LibreCat-ID: 22151
Brüggemann, J. P., et al. “Entwicklung Einer Additiv Gefertigten Fußorthese.” Rapid Tech - International Trade Show & Conference for Additive Manufacturing, 2017, pp. 26–37.
LibreCat
2017 | Conference Paper | LibreCat-ID: 22153
Bauer, B., et al. “Crack Length Measurement of Additive Manufactured Plastics Based on the Current Potential Drop Method.” Symposium on Fatigue and Fracture of Additive Manufactured Materials and Components, 2017.
LibreCat
2017 | Journal Article | LibreCat-ID: 22165
Wiesener, M., et al. “Corrosion Properties of Bioresorbable FeMn-Ag Alloys Prepared by Selective Laser Melting.” Materials and Corrosion, vol. 68, no. 10, 2017, pp. 1028–36, doi:10.1002/maco.201709478.
LibreCat
| DOI
2017 | Journal Article | LibreCat-ID: 22195
Josupeit, Stefan, and Hans-Joachim Schmid. “Experimental Analysis and Modeling of Local Ageing Effects during Laser Sintering of Polyamide 12 in Regard to Individual Thermal Histories.” Journal of Applied Polymer Science, vol. 134, no. 42, Wiley, 2017, doi:10.1002/app.45435.
LibreCat
| DOI
2017 | Book | LibreCat-ID: 22419
Künneke, Thomas, and Detmar Zimmer. Funktionsintegration Additiv Gefertigter Dämpfungsstrukturen Bei Biegeschwingungen. Springer Fachmedien Wiesbaden GmbH, 2017, pp. 61–74, doi:10.1007/978-3-658-17780-5.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 22420
Lammers, Stefan, et al. “Entwicklung Und Additive Herstellung Einer Leichtbau-Rotorwelle Für Eine Permanentmagneterregte Synchronmaschine.” Proceedings of the 14th Rapid.Tech Conference, Hanser Verlag, 2017, pp. 80–93, doi:10.3139/9783446454606.006.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 22421
Lieneke, Tobias, et al. “Maßtoleranzen Für Die Additive Fertigung: Experimentelle Untersuchungen Für Das Lasersintern.” Proceedings of the 14th Rapid.Tech Conference, Hanser Verlag, 2017, pp. 327–44, doi:10.3139/9783446454606.024 .
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 22422
Knoop, Frederick, and Tobias Lieneke. “Dimensional Tolerances for Additive Manufacturing: Fused Deposition Modeling.” Inside 3D Printing 2017, 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 22425
Lieneke, Tobias, et al. “Geometrische Toleranzen Für Additive Fertigungsverfahren.” 3. Summer School Toleranzmangement 2017, vol. 3, 2017.
LibreCat
2017 | Journal Article | LibreCat-ID: 22426
Eschner, Niclas, et al. “Kombination Etablierter Und Additiver Fertigung: Wirtschaftlicher Einsatz Des Laser-Strahlschmelzens (LBM) Durch Die Kombination Mit Etablierten Fertigungsverfahren in Einer Prozesskette.” ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb, vol. 112, no. 7–8, De Gruyter, 2017, pp. 469–72, doi:10.3139/104.111751.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 21690
Deppe, G., et al. “Rational Decision-Making for the Beneficial Application of Additive Manufacturing.” 28th Annual International Solid Freeform Fabrication Symposium, vol. 28, 2017, pp. 2597–611, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/RationalDecisionMakingfortheBeneficialApplic.pdf.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 21691
Reiher, T., et al. “Computer Integration for Geometry Generation for Product Optimization with Additive Manufacturing.” 28th Annual International Solid Freeform Fabrication Symposium, vol. 28, 2017, pp. 903–21, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ComputerIntegrationforGeometryGenerationforP.pdf.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 21692
Kruse, A., et al. “Integrating AM into Existing Companies - Selection of Existing Parts for Increase of Acceptance.” 28th Annual International Solid Freeform Fabrication Symposium, vol. 28, 2017, pp. 2575–84, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/IntegratingAMintoExistingCompaniesSelection.pdf.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 21693
Jahnke, U., et al. “Design for Protection: Systematic Approach to Prevent Product Piracy during Product Development Using AM .” 28th Annual International Solid Freeform Fabrication Symposium, vol. 28, 2017, pp. 2481–92, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/DesignforProtectionSystematicApproachtoPrev.pdf.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 21694
Büsching, J., and R. Koch. “Ramp-Up-Management in Additive Manufacturing – Technology Integration in Existing Business Processes.” 28th Annual International Solid Freeform Fabrication Symposium, vol. 28, 2017, pp. 2585–96, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/RampUpManagementinAdditiveManufacturingTec.pdf.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 21695
Reiher, T., et al. “Computer Integration for Geometry Generation for Product Optimization with Additive Manufacturing.” 28th Annual International Solid Freeform Fabrication Symposium, vol. 28, 2017, pp. 903–21, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ComputerIntegrationforGeometryGenerationforP.pdf.
LibreCat
| DOI
2017 | Journal Article | LibreCat-ID: 21697
Deppe, G., and C. Lindemann. “Hybrid Manufacturing with Additive Manufacturing.” CECIMO Magazine, vol. 17, no. 11, 2017, pp. 28–29, doi:https://www.cecimo.eu/wp-content/uploads/2019/03/CECIMO-Magazine-Spring-2017-LQ.pdf.
LibreCat
| DOI
2017 | Journal Article | LibreCat-ID: 21704
Reiher, T., et al. “Holistic Approach for Industrializing AM Technology - from Part Selection to Test and Verification.” Progress in Additive Manufacturing, vol. 2, Springer, 2017, pp. 43–55, doi:https://doi.org/10.1007/s40964-017-0018-y.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 22040
Knoop, F., et al. “Reproduzierbarkeit Der Maßhaltigkeit Im Fused Deposition Modeling.” Rapid Tech - International Trade Show & Conference for Additive Manufacturing, 2017, pp. 52–66, doi:10.3139/9783446454606.004.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 22042
Schumacher, C., et al. “Considering Machine- and Process-Specific Influences to Create Custom-Built Specimens for the Fused Deposition Modeling Process.” 28th Annual International Solid Freeform Fabrication Symposium, vol. 28, 2017, pp. 470–84, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ConsideringMachineandProcessSpecificInfluenc.pdf.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 22045
Knoop, F., and Volker Schöppner. “Geometrical Accuracy of Holes and Cylinders Manufactured with Fused Deposition Modeling.” 28th Annual International Solid Freeform Fabrication Symposium, vol. 28, 2017, pp. 2757–76, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/GeometricalAccuracyofHolesandCylindersManufa.pdf.
LibreCat
| DOI
2017 | Journal Article | LibreCat-ID: 22049
Schöppner, Volker, et al. “Beurteilung Der Schweißnahtfestigkeiten Verschiedener Kunststoffe Im FDM-Prozess.” Jahresmagazin Kunststofftechnik, vol. 1, no. 1, Institut für Wissenschaftliche Veröffentlichungen, 2017, pp. 108–14.
LibreCat
2017 | Conference Paper | LibreCat-ID: 6559
Claes, Leander, et al. “Additively Manufactured Acoustic Diffuser Structures for Ultrasonic Measurement Applications.” Proceedings of Meetings on Acoustics, 2017, p. 030004, doi:10.1121/2.0000688.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 16063
Ahlers, Dominik, and Thomas Tröster. Approve of Porostiy for Increasing Process Speed in the Laser Melting Process of Ti6Al4V. 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 16074
Ahlers, Dominik, and Thomas Tröster. Materialkombinationen in der additive Fertigung. 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 16075
Ahlers, Dominik, and Thomas Tröster. Aspekte der Produktentwicklung in der additiven Fertigung. 2017.
LibreCat
2017 | Journal Article | LibreCat-ID: 22038
Moritzer, Elmar, et al. “Universal Micromachining Platform and Basic Technologies for the Manufacture and Marking of Microphysiological Systems.” Micromachines, vol. 8, no. 246, MDPI, 2017, doi:10.3390/mi8080246.
LibreCat
| DOI
2017 | Journal Article | LibreCat-ID: 22033
Fischer, M., and Volker Schöppner. “Fatigue Behavior of FDM Parts Manufactured with Ultem 9085.” JOM: The Journal of The Minerals. Metals & Materials Society (TMS), Springer Verlag, 2017, pp. 563–68, doi:10.1007/s11837-016-2197-2.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 22023
Knoop, F., et al. “Quality Improvement of FDM Parts by Parameter Optimization .” 32nd International Conference of the Polymer Processing Society, vol. 32, American Institute of Physics, 2017, doi:10.1063/1.5016790.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 16066
Ahlers, Dominik, et al. “Increasing Process Speed in the Laser Melting Process of Ti6Al4V and the Reduction of Pores during Hot Isostatic Pressing.” Proceedings of the 28th Annual InternationalSolid Freeform Fabrication Symposium – An Additive Manufacturing Conference, 2017.
LibreCat