Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
198 Publications
2024 | Journal Article | LibreCat-ID: 51518
Aimiyekagbon, O. K., Bender, A., Hemsel, T., & Sextro, W. (2024). Diagnostics of Piezoelectric Bending Actuators Subjected to Varying Operating Conditions. Electronics, 13(3), Article 521. https://doi.org/10.3390/electronics13030521
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 46813 | 
Wohlleben, M. C., Muth, L., Peitz, S., & Sextro, W. (2023). Transferability of a discrepancy model for the dynamics of electromagnetic oscillating circuits. Proceedings in Applied Mathematics and Mechanics. https://doi.org/10.1002/pamm.202300039
LibreCat
| DOI
| Download (ext.)
2023 | Conference Paper | LibreCat-ID: 47116 |
Aimiyekagbon, O. K., Löwen, A., Bender, A., Muth, L., & Sextro, W. (2023). Expert-Informed Hierarchical Diagnostics of Multiple Fault Modes of a Spacecraft Propulsion System. Proceedings of the Asia Pacific Conference of the PHM Society 2023 , 4(1). https://doi.org/10.36001/phmap.2023.v4i1.3596
LibreCat
| DOI
| Download (ext.)
2023 | Conference Abstract | LibreCat-ID: 51117
Scheidemann, C., Hemsel, T., Friesen, O., Claes, L., & Sextro, W. (2023). Influence of Temperature and Pre-Stress on the Piezoelectric Material Behavior of Ring-Shaped Ceramics. 7th International Conference on Advanced Electromaterials (ICAE 2023), Jeju, Korea.
LibreCat
2023 | Conference Abstract | LibreCat-ID: 51118
Scheidemann, C., Hemsel, T., Friesen, O., Claes, L., & Sextro, W. (2023). Influence of Temperature and Pre-Stress on the Piezoelectric Material Behavior of Ring-Shaped Ceramics. International Conference on Functional Materials & Devices 2023 (ICFMD 2023), Incheon, Korea.
LibreCat
2023 | Conference Abstract | LibreCat-ID: 51119
Scheidemann, C., Hagedorn, O. E. C., Hemsel, T., & Sextro, W. (2023). Experimental Investigation of Bond Formation and Wire Deformation in the Ultrasonic Wire Bonding Process. International Conference on Functional Materials & Devices 2023 (ICFMD 2023), Jeju, Korea.
LibreCat
2023 | Book Chapter | LibreCat-ID: 51338
Schütte, J., & Sextro, W. (2023). Einfluss der Radhubkinematik auf den Reifenverschleiß. In 20. VDI-Fachtagung Reifen - Fahrwerk - Fahrbahn (Vol. 2425, pp. 165–180). VDI Verlag GmbH.
LibreCat
2022 | Conference Paper | LibreCat-ID: 29934
Muth, L., Noll, C., & Sextro, W. (2022). Generation of a Reduced, Representative, Virtual Test Drive for Fast Evaluation of Tire Wear by Clustering of Driving Data. In A. Orlova & D. Cole (Eds.), Advances in Dynamics of Vehicles on Roads and Tracks II - Proceedings of the 27th Symposium of the International Association of Vehicle System Dynamics, IAVSD 2021. Springer. https://doi.org/10.1007/978-3-031-07305-2_92
LibreCat
| DOI
| Download (ext.)
2022 | Book Chapter | LibreCat-ID: 29727
Wohlleben, M. C., Bender, A., Peitz, S., & Sextro, W. (2022). Development of a Hybrid Modeling Methodology for Oscillating Systems with Friction. In Machine Learning, Optimization, and Data Science. Springer International Publishing. https://doi.org/10.1007/978-3-030-95470-3_8
LibreCat
| DOI
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 30371
Hagedorn, O. E. C., Broll, M., Kirsch, O., Hemsel, T., & Sextro, W. (2022). Experimental Investigation of the Influence of different Bond Tool Grooves on the Bond Quality for Ultrasonic Thick Wire Bonding. CIPS 2022 - 12th International Conference on Integrated Power Electronics Systems, 138–143.
LibreCat
2022 | Newspaper Article | LibreCat-ID: 47159
Aimiyekagbon, O. K., Bender, A., & Sextro, W. (2022). On the applicability of time series features as health indicators for technical systems operating under varying conditions. Condition Monitor, 425, 5–10.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34104
Scheidemann, C., Kirsch, O., Hemsel, T., & Sextro, W. (2022). Experimental Investigation of Multidimensional Ultrasonic Heavy Wire Bonding. 2022 IEEE 9th Electronics System-Integration Technology Conference (ESTC). https://doi.org/10.1109/estc55720.2022.9939478
LibreCat
| DOI
2022 | Patent | LibreCat-ID: 9980
Reinke, K., Bender, A., Meyer, T., Sextro, W., & Kimotho, J. K. (2022). Patent DE 10 2017 000 926 B4: Gerät mit wenigstens einem elastisch verformbaren Bauteil, insbesondere einem Gummi-Metall-Lager und mit einer Einrichtung zur Feststellung des Beginns einer verschleißbedingten Bauteil-Restnutzungsdauer, sowie Verfahren zur Bestimmung der Bauteil-Restnutzungsdauer.
LibreCat
| Files available
2022 | Report | LibreCat-ID: 52045
Scheidemann, C., Hemsel, T., & Sextro, W. (2022). Modellbasierte Ermittlung optimaler Prozessparameter für neuartige Ultraschallbondverbindungen. LibreCat University. https://doi.org/10.2314/KXP:1879655276
LibreCat
| Files available
| DOI
2021 | Conference Paper | LibreCat-ID: 27652
Aimiyekagbon, O. K., Bender, A., & Sextro, W. (2021). Extraktion und Selektion geeigneter Merkmale für die Restlebensdauerprognose von technischen Systemen trotz aleatorischen Unsicherheiten . VDI-Berichte 2391, 197–210.
LibreCat
2021 | Journal Article | LibreCat-ID: 21436
Schemmel, R., Krieger, V., Hemsel, T., & Sextro, W. (2021). Co-simulation of MATLAB and ANSYS for ultrasonic wire bonding process optimization. Microelectronics Reliability, 119, 114077. https://doi.org/10.1016/j.microrel.2021.114077
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 22724 |
Bender, A., & Sextro, W. (2021). Hybrid Prediction Method for Remaining Useful Lifetime Estimation Considering Uncertainties. In P. Do, S. King, & Olga Fink (Eds.), Proceedings of the European Conference of the PHM Society 2021 (Vol. 6, Issue 1). https://doi.org/10.36001/phme.2021.v6i1.2843
LibreCat
| DOI
| Download (ext.)
2021 | Conference Paper | LibreCat-ID: 22507 |
Aimiyekagbon, O. K., Bender, A., & Sextro, W. (n.d.). On the applicability of time series features as health indicators for technical systems operating under varying conditions. Proceedings of the Seventeenth International Conference on Condition Monitoring and Asset Management (CM 2021). Seventeenth International Conference on Condition Monitoring and Asset Management (CM 2021).
LibreCat
| Files available
2021 | Conference Paper | LibreCat-ID: 27111 |
Aimiyekagbon, O. K., Muth, L., Wohlleben, M. C., Bender, A., & Sextro, W. (2021). Rule-based Diagnostics of a Production Line. In P. Do, S. King, & O. Fink (Eds.), Proceedings of the European Conference of the PHM Society 2021 (Vol. 6, Issue 1, pp. 527–536). https://doi.org/10.36001/phme.2021.v6i1.3042
LibreCat
| DOI
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 27508 |
Schütte, J., & Sextro, W. (2021). Tire Wear Reduction Based on an Extended Multibody Rear Axle Model. Vehicles, 233–256. https://doi.org/10.3390/vehicles3020015
LibreCat
| DOI
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 29293 |
Martin, S., Schütte, J., Bäumler, C., Sextro, W., & Tröster, T. (2021). Identification of joints for a load-adapted shape in a body in white using steady state vehicle simulations. Forces in Mechanics, 6, Article 100065. https://doi.org/10.1016/j.finmec.2021.100065
LibreCat
| DOI
| Download (ext.)
2020 | Conference Paper | LibreCat-ID: 17355
Schemmel, R., Scheidemann, C., Hemsel, T., Kirsch, O., & Sextro, W. (2020). Experimental analysis and modelling of bond formation in ultrasonic heavy wire bonding. CIPS 2020; 11th International Conference on Integrated Power Electronics Systems, 1–6.
LibreCat
2020 | Book | LibreCat-ID: 9857
Magnus, K., Popp, K., & Sextro, W. (2020). Schwingungen. Springer Vieweg Wiesbaden. https://doi.org/10.1007/978-3-658-31116-2
LibreCat
| DOI
2020 | Conference Paper | LibreCat-ID: 17706
Schemmel, R., Krieger, V., Hemsel, T., & Sextro, W. (2020). Co-simulation of MATLAB and ANSYS for ultrasonic wire bonding process optimization. 2020 21st International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE). https://doi.org/10.1109/eurosime48426.2020.9152679
LibreCat
| DOI
2020 | Conference Paper | LibreCat-ID: 17810
Aimiyekagbon, O. K., Bender, A., & Sextro, W. (2020). Evaluation of time series forecasting approaches for the reliable crack length prediction of riveted aluminium plates given insufficient data. PHM Society European Conference, 5(1).
LibreCat
2020 | Book Chapter | LibreCat-ID: 22007
Schütte, J., & Sextro, W. (2020). Model-Based Investigation of the Influence of Wheel Suspension Characteristics on Tire Wear. In Lecture Notes in Mechanical Engineering. https://doi.org/10.1007/978-3-030-38077-9_201
LibreCat
| DOI
2020 | Patent | LibreCat-ID: 9981
Reinke, K., Bender, A., Meyer, T., Sextro, W., & Kimotho, J. K. (2020). Patent EP 3 358 332 B1: Verfahren zur Bestimmung des Beginns einer verschleißbedingten Bauteil-Restnutzungsdauer eines elastisch verformbaren Bauteils, als Strukturteil und/oder Lagerteil eines Geräts.
LibreCat
| Files available
2019 | Conference Paper | LibreCat-ID: 23716
Kaul, T., Hentze, J., Sextro, W., & Gräßler, I. (2019). Integration von Verlässlichkeitsmodellen der Entwicklung in einen Digitalen Zwilling zur Umsetzung einer vorausschauenden Instandhaltung. In T. Bertram, B. Corves, I. Gräßler, & K. Janschek (Eds.), Fachtagung Mechatronik 2019 Paderborn (pp. 19–24).
LibreCat
2019 | Conference Paper | LibreCat-ID: 15475
Schütte, J., Sextro, W., & Kohl, S. (2019). Halbachsprüfstand zur kinematischen, elastokinematischen und dynamischen Charakterisierung von Radaufhängungen. In Fachtagung Mechatronik 2019. Paderborn: Universitätsbibliothek Paderborn, 2019. https://doi.org/10.17619/UNIPB/1-777
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 14852
Dunst, P., Bornmann, P., Hemsel, T., Littmann, W., & Sextro, W. (2019). Atomization of Fluids with Ultrasound. In J. Lötters & G. Urban (Eds.), Conference Proceedings - The 4th Conference on MicroFluidic Handling Systems (MFHS2019) (pp. 140–143). Enschede, The Netherlands.
LibreCat
| Files available
2019 | Conference Paper | LibreCat-ID: 15244
Hagedorn, O. E. C., Pielsticker, D., Hemsel, T., & Sextro, W. (2019). Messung hochfrequenter In-Plane-Schwingungen mittels Laservibrometrie in räumlich eingeschränkten Umgebungen. In 2. VDI-Fachtagung Schwingungen 2019. VDI Verlag GmbH · Düsseldorf 2019.
LibreCat
2019 | Book | LibreCat-ID: 10002
Sextro, W., & Brökelmann, M. (2019). Intelligente Herstellung zuverlässiger Kupferbondverbindungen (Vol. VIII). Springer Verlag. https://doi.org/10.1007/978-3-662-55146-2
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 10255
Bender, A., Reinke, K., & Sextro, W. (2019). Konstruktion und Zustandsüberwachung eines Gummi-Metall-Teils mit integriertem Thermoelement. In 10. VDI-Fachtagung Schwingungen von Windenergieanlagen 2019 (Vol. VDI-Berichte 2346, pp. 241–248). Bremen 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 10257
Kaul, T., Hentze, J., Sextro, W., & Gräßler, I. (2019). Integration von Verlässlichkeitsmodellen der Entwicklung in einen Digitalen Zwilling zur Umsetzung einer vorausschauenden Instandhaltung. In Fachtagung Mechatronik 2019 Paderborn.
LibreCat
2019 | Conference Paper | LibreCat-ID: 10258
Dunst, P., Hemsel, T., Bornmann, P., Littmann, W., & Sextro, W. (2019). Modellbasierte und experimentelle Charakterisierung von intensiven Ultraschall-Stehwellenfeldern für die Zerstäubung hochviskoser Flüssigkeiten. In DAGA 2019. Rostock.
LibreCat
2019 | Journal Article | LibreCat-ID: 10334
Schemmel, R., Hemsel, T., Dymel, C., Hunstig, M., Brökelmann, M., & Sextro, W. (2019). Using complex multi-dimensional vibration trajectories in ultrasonic bonding and welding. Sensors and Actuators A: Physical, 295, 653–662. https://doi.org/10.1016/j.sna.2019.04.025
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 13460 |
Bender, A., Schinke, L., & Sextro, W. (2019). Remaining useful lifetime prediction based on adaptive failure thresholds. In M. Beer & E. Zio (Eds.), Proceedings of the 29th European Safety and Reliability Conference (ESREL2019) (Issue 29, pp. 1262–1269).
LibreCat
| Download (ext.)
2019 | Conference Paper | LibreCat-ID: 13461 |
Kaul, T., Bender, A., & Sextro, W. (2019). Digital Twin for Reliability Analysis During Design and Operation of Mechatronic Systems. In M. Beer & E. Zio (Eds.), Proceedings of the 29th European Safety and Reliability Conference (ESREL2019) (Issue 29, pp. 2340–2347).
LibreCat
| Download (ext.)
2018 | Conference Paper | LibreCat-ID: 9987
Bender, A., & Sextro, W. (2018). A particle filtering approach for temperature based prognostics. In Safety and Reliability – Safe Societies in a Changing World (pp. 1025–1033). Trondheim, Norway.
LibreCat
2018 | Journal Article | LibreCat-ID: 9990
Dunst, P., Bornmann, P., Hemsel, T., Littmann, W., & Sextro, W. (2018). Vibration Assisted Dosing, Mixing and Transport of Dry Fine Powders. ACTUATOR 2018; 16th International Conference on New Actuators, 142–145.
LibreCat
2018 | Journal Article | LibreCat-ID: 9991
Dunst, P., Bornmann, P., Hemsel, T., & Sextro, W. (2018). Vibration-Assisted Handling of Dry Fine Powders. Actuators 2018, 7(2)., 1–11. https://doi.org/10.3390/act7020018
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 9992
Dymel, C., Eichwald, P., Schemmel, R., Hemsel, T., Brökelmann, M., Hunstig, M., & Sextro, W. (2018). Numerical and statistical investigation of weld formation in a novel two-dimensional copper-copper bonding process. In (Proceedings of 7th Electronics System-Integration Technology Conference, Dresden, Germany) (pp. 1–6).
LibreCat
2018 | Conference Paper | LibreCat-ID: 9993
Dymel, C., Schemmel, R., Hemsel, T., Sextro, W., Brökelmann, M., & Hunstig, M. (2018). Experimental investigations on the impact of bond process parameters in two-dimensional ultrasonic copper bonding. In (Proceedings of 8th Electronics IEEE CPMT Symposium Japan (ICSJ 2018), Kyoto, Japan) (pp. 41–44).
LibreCat
2018 | Book | LibreCat-ID: 9995
Meyer, T., Kaul, T., Kimotho, J. K., & Sextro, W. (2018). Steigerung der Intelligenz mechatronischer Systeme (Vol. Steigerung der Verlässlichkeit technischer Systeme, pp. 193–213). Springer Nature Switzerland AG. Part of Springer Nature.
LibreCat
2018 | Conference Paper | LibreCat-ID: 9997
Schemmel, R., Althoff, S., Sextro, W., Unger, A., Brökelmann, M., & Hunstig, M. (2018). Effects of different working frequencies on the joint formation in copper wire bonding. In CIPS 2018 - 10th International Conference on Integrated Power Electronics Systems (CIPS 2018) (pp. 230–235). Stuttgart, Germany.
LibreCat
2018 | Conference Paper | LibreCat-ID: 9998
Schemmel, R., Hemsel, T., & Sextro, W. (2018). Numerical and experimental investigations in ultrasonic heavy wire bonding. In 6th European Conference on Computational Mechanics (ECCM 6) (pp. 1–12). Glasgow, UK.
LibreCat
2018 | Conference Paper | LibreCat-ID: 9999
Unger, A., Hunstig, M., Meyer, T., Brökelmann, M., & Sextro, W. (2018). Intelligent Production of Wire Bonds using Multi-Objective Optimization – Insights, Opportunities and Challenges. In In Proceedings of IMAPS 2018 – 51st Symposium on Microelectronics, Pasadena, CA, 2018 (Vol. Vol. 2018, No. 1, pp. 000572-000577.). https://doi.org/10.4071/2380-4505-2018.1.000572
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 23560
Hentze, J., Kaul, T., Gräßler, I., & Sextro, W. (2017). Integrated modeling of behavior and reliability in system development. In A. Maier, S. Skec, C. McKesson, & M. Van der Loos (Eds.), ICED17, 21ST INTERNATIONAL CONFERENCE ON ENGINEERING DESIGN, Nr. DS 87-USB (pp. 385–394). Vancouver, Kanada, 21. - 25. Aug. 2017: Design Society.
LibreCat
2017 | Conference Paper | LibreCat-ID: 9969
Bender, A., Kaul, T., & Sextro, W. (2017). Entwicklung eines Condition Monitoring Systems für Gummi-Metall-Elemente. In Verlagsschriftenreihe des Heinz Nixdorf Instituts Band 369, Paderborn, 2017 (pp. 347–358). Wissenschaftsforum Intelligente Technische Systeme (WInTeSys) 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 9970
Bender, A., Kimotho, J. K., Kohl, S., Sextro, W., & Reinke, K. (2017). Modellbasierte Prognose der nutzbaren Restlebensdauer von Gummi-Metall-Elementen. In 15. Internationale Schienenfahrzeugtagung (pp. 123–125).
LibreCat
2017 | Conference Paper | LibreCat-ID: 9971
Bender, A., Sextro, W., & Reinke, K. (2017). Neuartiges Konzept zur Lebensdauerprognose von Gummi-Metall-Elementen. In VDI-Berichte 2301 (pp. 49–60).
LibreCat
2017 | Journal Article | LibreCat-ID: 9972
Dunst, P., Hemsel, T., & Sextro, W. (2017). Analysis of pipe vibration in an ultrasonic powder transportationsystem. Elsevier, Sensors and Actuators A 263, 733–736.
LibreCat
2017 | Journal Article | LibreCat-ID: 9973
Eichwald, P., Althoff, S., Schemmel, R., Sextro, W., Unger, A., Brökelmann, M., & Hunstig, M. (2017). Multi-dimensional Ultrasonic Copper Bonding – New Challenges for Tool Design. IMAPSource, Vol. 2017, No. 1.
LibreCat
2017 | Conference Paper | LibreCat-ID: 9974
Hentze, J., Kaul, T., Grässler, I., & Sextro, W. (2017). Integrated modeling og behavior and reliability in system development. In ICED17, 21st International conference on enginieering design (pp. 385–394).
LibreCat
2017 | Journal Article | LibreCat-ID: 9976
Kaul, T., Meyer, T., & Sextro, W. (2017). Formulation of reliability-related objective functions for design of intelligent mechatronic systems. SAGE Journals, Vol. 231(4), 390–399. https://doi.org/10.1177/1748006X17709376
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 9978
Kimotho, J. K., Sextro, W., & Hemsel, T. (2017). Estimation of Remaining Useful Lifetime of Piezoelectric Transducers Based on Self-Sensing. In IEEE Transactions on Reliability (pp. 1–10). https://doi.org/10.1109/TR.2017.2710260
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 9982
Schemmel, R., Hemsel, T., & Sextro, W. (2017). MoRFUS: Mobile Reinigungseinheit für Förderketten basierend auf Ultraschall. In 43. Deutsche Jahrestagung für Akustik (pp. 611–614). Kiel 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 9983
Schulze, S., Sextro, W., & Kister, K. (2017). Model based optimization of dynamics in adaptive headlamps. In Proceedings of the 12th International Symposium on Automotive Lighting 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 9985
Sextro, W., Meyer, T., Kaul, T., & Kimotho, J. K. (2017). Entwicklung verlässlicher, intelligenter Systeme. In VDI-Berichte 2307–28. Tagung Technische Zuverlässigkeit (TTZ 2017) - Entwicklung und Betrieb zuverlässiger Produkte. (pp. 17–30). Leonberg.
LibreCat
2016 | Conference Paper | LibreCat-ID: 9955
Althoff, S., Meyer, T., Unger, A., Sextro, W., & Eacock, F. (2016). Shape-Dependent Transmittable Tangential Force of Wire Bond Tools. In IEEE 66th Electronic Components and Technology Conference (pp. 2103–2110). https://doi.org/10.1109/ECTC.2016.234
LibreCat
| DOI
2016 | Journal Article | LibreCat-ID: 9957
Brökelmann, M., Unger, A., Meyer, T., Althoff, S., Sextro, W., Hunstig, M., … Guth, K. (2016). Kupferbondverbindungen intelligent herstellen. Wt-Online, 7/8, 512–519.
LibreCat
2016 | Conference Paper | LibreCat-ID: 9958
Dunst, P., Sextro, W., Bornmann, P., Hemsel, T., & Littmann, W. (2016). Transportation of dry fine powders by coordinated friction manipulation. In PAMM Proc. Appl. Math. Mech. 16 (pp. 635–636). Braunschweig. https://doi.org/10.1002/pamm.201610306
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 9960
Eichwald, P., Unger, A., Eacock, F., Althoff, S., Sextro, W., Guth, K., & Brökelmann, M. (2016). Micro Wear Modeling in Copper Wire Wedge Bonding. In IEEE CPMT Symposium Japan, 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 9961
Kaul, T., Meyer, T., & Sextro, W. (2016). Modeling of Complex Redundancy in Technical Systems with Bayesian Networks. In Proceedings of the Third European Conference of the Prognostics and Health Management Society 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 9963
Kohl, S., Sextro, W., & Schulze, S. (2016). Aspects of Flexible Viscoelastic Suspension Modeling for Frictional Rolling Contact Analysis using ADAMS. In The 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AiGEV 2016), Cyberjaya, Malaysia, 2016. (pp. 1–12). Cyberjaya, Malaysia, 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 9964
Lessmeier, C., Kimotho, J. K., Zimmer, D., & Sextro, W. (2016). Condition Monitoring of Bearing Damage in Electromechanical Drive Systems by Using Motor Current Signals of Electric Motors: A Benchmark Data Set for Data-Driven Classification. In European Conference of the Prognostics and Health Management Society.
LibreCat
2016 | Conference Paper | LibreCat-ID: 9966
Meyer , T., Unger, A., Althoff, S., Sextro, W., Brökelmann, M., Hunstig, M., & Guth, K. (2016). Reliable Manufacturing of Heavy Copper Wire Bonds Using Online Parameter Adaptation. In IEEE 66th Electronic Components and Technology Conference (pp. 622–628). https://doi.org/10.1109/ECTC.2016.215
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 9967
Schulze, S., Sextro, W., & Kohl, S. (2016). Using Adequate Reduced Models for Flexible Multibody Systems of Automotive Mechatronic Systems. In 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AiGEV) Malaysia 2016 (pp. 1–11).
LibreCat
2016 | Conference Paper | LibreCat-ID: 9968
Unger, A., Schemmel, R., Meyer, T., Eacock, F., Eichwald, P., Althoff, S., … Guth, K. (2016). Validated Simulation of the Ultrasonic Wire Bonding Process. In Wear Modeling in Copper Wire Wedge Bonding. IEEE CPMT Symposium Japan, 2016 (pp. 251–254). IEEE CPMT Symposium Japan.
LibreCat
2015 | Conference Paper | LibreCat-ID: 9943
Althoff, S., Unger, A., Sextro, W., & Eacock, F. (2015). Improving the cleaning process in copper wire bonding by adapting bonding parameters. In 2015 17th Electronics Packaging Technology Conference (pp. 1–6). https://doi.org/10.1109/EPTC.2015.7412402
LibreCat
| DOI
2015 | Journal Article | LibreCat-ID: 9944
Bornmann, P., Hemsel, T., Sextro, W., Memoli, G., Hodnett, M., & Zeqiri, B. (2015). Kavitationsdetektion mittels Self-Sensing-Ultraschallwandler. Tm - Technisches Messen, 82(2), 73–84. https://doi.org/10.1515/teme-2015-0017
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 9945
Kaul, T., Meyer, T., & Sextro, W. (2015). Integrierte Modellierung der Dynamik und der Verlässlichkeit komplexer mechatronischer Systeme. In J. Gausemeier, R. Dumitrescu, F. Rammig, W. Schäfer, & A. Trächtler (Eds.), 10. Paderborner Workshop Entwurf mechatronischer Systeme (pp. 101–112). Paderborn: Heinz Nixdorf Institut, Universität Paderborn.
LibreCat
2015 | Conference Paper | LibreCat-ID: 9946
Kaul, T., Meyer, T., & Sextro, W. (2015). Integrated Model for Dynamics and Reliability of Intelligent Mechatronic Systems. In P. et al.} (Ed.), European Safety and Reliability Conference (ESREL2015). London: Taylor and Francis. https://doi.org/10.1201/b19094-290
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 9947
Kimotho, J. K., & Sextro, W. (2015). Comparison and ensemble of temperature-based and vibration-based methods for machinery prognostics. In Annual Conference of the Prognostics and Health Management Society 2015 (Vol. 6).
LibreCat
2015 | Conference Paper | LibreCat-ID: 9949
Meyer, T., Kaul, T., & Sextro, W. (2015). Advantages of reliability-adaptive system operation for maintenance planning. In Proceedings of the 9th IFAC Symposium on Fault Detection, Supervision and Safety for Technical Processes (pp. 940–945). https://doi.org/10.1016/j.ifacol.2015.09.647
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 9950
Meyer, T., Kimotho, J. K., & Sextro, W. (2015). Anforderungen an Condition-Monitoring-Verfahren zur Nutzung im zuverläsigkeitsgeregelten Betrieb adaptiver Systeme. In 27. Tagung Technische Zuverlässigkeit (TTZ 2015) - Entwicklung und Betrieb zuverlässiger Produkte (pp. 111–122). Leonberg.
LibreCat
2015 | Conference Paper | LibreCat-ID: 9951
Meyer, T., Unger, A., Althoff, S., Sextro, W., Brökelmann, M., Hunstig, M., & Guth, K. (2015). Modeling and simulation of the ultrasonic wire bonding process. In 2015 17th Electronics Packaging Technology Conference. https://doi.org/10.1109/EPTC.2015.7412377
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 9952
Schulte, F., Neuhaus, J., & Sextro, W. (2015). A Mechanical Model for the Dynamical Contact of Elastic Rough Bodies with Viscoelastic Properties. In Proceedings of ICoEV 2015 International Conference on Engineering Vibration (pp. 1109–1117).
LibreCat
2015 | Conference Paper | LibreCat-ID: 9954
Unger, A., Sextro, W., Meyer, T., Eichwald, P., Althoff, S., Eacock, F., & Brökelmann, M. (2015). Modeling of the Stick-Slip Effect in Heavy Copper Wire Bonding to Determine and Reduce Tool Wear. In 2015 17th Electronics Packaging Technology Conference. https://doi.org/10.1109/EPTC.2015.7412375
LibreCat
| DOI
2014 | Book | LibreCat-ID: 25168
Gausemeier, J., Rammig, F.-J., Schäfer, W., & Sextro, W. (2014). Dependability of Self-Optimizing Mechatronic Systems. Springer-Verlag.
LibreCat
2014 | Book Chapter | LibreCat-ID: 25173
Dellnitz, M., Flaßkamp, K., Hartmann, P., Krüger, M., Meyer, T., Priesterjahn, C., Ober-Blöbaum, S., Rasche, C., Sextro, W., Stahl, K., & Trächtler, A. (2014). Self-optimizing Mechatronic Systems. In Dependability of Self-optimizing Mechatronic Systems, Kapitel: 1.1 (pp. 3–12). Springer-Verlag.
LibreCat
2014 | Book Chapter | LibreCat-ID: 28394
Dorociak, R., Gausemeier, J., Iwanek, P., Meyer, T., Sextro, W., & Sondermann-W{\"o}lke, C. (2014). Development of the Active Guidance Module. In Dependability of Self-optimizing Mechatronic Systems (pp. 178–182). AACE Press.
LibreCat
2014 | Book | LibreCat-ID: 28396
Gausemeier, J., Rammig, F.-J., Sch{\"a}fer, Wilhelm, & Sextro, W. (2014). Dependability of Self-Optimizing Mechatronic Systems. Springer-Verlag, Heidelberg, Germany.
LibreCat
2014 | Book Chapter | LibreCat-ID: 28399
Dorociak, R., Gausemeier, J{\"u}rgen, Iwanek, Peter, Meyer, T., & Sextro, W. (2014). Selecting Suitable Methods Using the Methodology. In Dependability of Self-optimizing Mechatronic Systems (pp. 174–178). Springer-Verlag Berlin Heidelberg.
LibreCat
2014 | Book Chapter | LibreCat-ID: 28400
Dorociak, R., Gausemeier, J., Iwanek, P., Meyer, T., & Sextro, W. (2014). Selecting Suitable Methods Using the Methodology. In Dependability of Self-optimizing Mechatronic Systems (pp. 174–178). Springer-Verlag Berlin Heidelberg.
LibreCat
2014 | Book Chapter | LibreCat-ID: 28410
Iwanek, P., Meyer, T., Priesterjahn, C., Sextro, W., & Va{\ss}holz, M. (2014). Challenges. In Dependability of Self-optimizing Mechatronic Systems (pp. 12–15). Springer-Verlag, Heidelberg, Germany.
LibreCat
2014 | Conference Paper | LibreCat-ID: 9868
Althoff, S., Neuhaus, J., Hemsel, T., & Sextro, W. (2014). Improving the bond quality of copper wire bonds using a friction model approach. In Electronic Components and Technology Conference (ECTC), 2014 IEEE 64th (pp. 1549–1555). https://doi.org/10.1109/ECTC.2014.6897500
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 9869
Bornmann, P., Hemsel, T., Sextro, W., Memoli, G., Hodnett, M., & Zeqiri, B. (2014). Self-Sensing Ultrasound Transducer for Cavitation Detection. In 2014 IEEE International Ultrasonics Symposium Proceedings (pp. 663–666). https://doi.org/10.1109/ULTSYM.2014.0163
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 9871
Eichwald, P., Sextro, W., Althof, S., Eacock, F., Unger, A., Meyer, T., & Guth, K. (2014). Analysis Method of Tool Topography Change and Identification of Wear Indicators for Heavy Copper Wire Wedge Bonding. In Proceedings of the 47th International Symposium on Microelectronics (pp. 856–861). https://doi.org/10.4071/isom-THP34
LibreCat
| DOI
2014 | Book | LibreCat-ID: 9873
Gausemeier, J., Josef Rammig, F., Schäfer, W., & Sextro, W. (2014). Dependability of Self-Optimizing Mechatronic Systems (Vol. Lecture Notes in Mechanical Engineering). Springer Berlin Heidelberg.
LibreCat
2014 | Journal Article | LibreCat-ID: 9874
Hemsel, T., Bornmann, P., Morita, T., Sondermann-Wölke, C., & Sextro, W. (2014). Reliability analysis of ultrasonic power transducers. Archive of Applied Mechanics, 1–7. https://doi.org/10.1007/s00419-014-0965-4
LibreCat
| DOI
2014 | Journal Article | LibreCat-ID: 9876
Hunstig, M., Hemsel, T., & Sextro, W. (2014). High-velocity operation of piezoelectric inertia motors: experimental validation. Archive of Applied Mechanics, 1–9. https://doi.org/10.1007/s00419-014-0940-0
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 9879
Kimotho, J. K., Meyer, T., & Sextro, W. (2014). PEM fuel cell prognostics using particle filter with model parameter adaptation. In Prognostics and Health Management (PHM), 2014 IEEE Conference on (pp. 1–6). https://doi.org/10.1109/ICPHM.2014.7036406
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 9880
Kimotho, J. K., & Sextro, W. (2014). An approach for feature extraction and selection from non-trending data for machinery prognosis. In Proceedings of the Second European Conference of the Prognostics and Health Management Society 2014 (Vol. 5).
LibreCat
2014 | Journal Article | LibreCat-ID: 9881
Kimotho, J. K., & Sextro, W. (2014). Optimal Parameter Tuning for Multiclass Support Vector Machines in Machinery Health State Estimation. PAMM, 14(1), 815–816. https://doi.org/10.1002/pamm.201410388
LibreCat
| DOI
2014 | Journal Article | LibreCat-ID: 9882
Kohl, S., Sextro, W., & Zuber, A. (2014). Tire footprint analysis depending on the elastokinematics of a multi-link suspension system using multi-body dynamics simulation. PAMM, 14(1), 65–66. https://doi.org/10.1002/pamm.201410020
LibreCat
| DOI
2014 | Book Chapter | LibreCat-ID: 9883
Meyer, T., Priesterjahn, C., & Sextro, W. (2014). Conclusion and Outlook. In J. Gausemeier, F. Josef Rammig, W. Schäfer, & W. Sextro (Eds.), Dependability of Self-Optimizing Mechatronic Systems (pp. 189–190). Springer Berlin Heidelberg. https://doi.org/10.1007/978-3-642-53742-4_5
LibreCat
| DOI
2014 | Journal Article | LibreCat-ID: 9885
Meyer , T., Sondermann-Wölke, C., & Sextro, W. (2014). Method to Identify Dependability Objectives in Multiobjective Optimization Problem. Conference Proceedings of the 2nd International Conference on System-Integrated Intelligence, 15, 46–53. https://doi.org/10.1016/j.protcy.2014.09.033
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 9887
Neuhaus, J., & Sextro, W. (2014). Thermo-Mechanical Model for Wheel Rail Contact using Coupled Point Contact Elements. In G. R. Liu & Z. W. Guan (Eds.), Proceedings of the 5th International Conference on Computational Methods. ScienTech Publisher.
LibreCat
2014 | Journal Article | LibreCat-ID: 9888
Schulze, S., Sextro, W., & Grüter, F. (2014). Contact Modeling in Multibody Systems with Elastic Bodies in High-Frequency Applications. PAMM, 14(1), 39–40. https://doi.org/10.1002/pamm.201410012
LibreCat
| DOI