Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
165 Publications
2019 | Journal Article | LibreCat-ID: 30716
Kraus M, Frey P, Kleffel T, Drummer D, Merklein M. Mechanical joining without auxiliary element by cold formed pins for multi-material-systems. AIP Conference Proceedings. 2019;2113:050006. doi:10.1063/1.5112570
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 20678
Bielak CR, Böhnke M, Beck R, Bobbert M, Meschut G. Numerical analysis of the robustness of clinching process considering the pre-forming of the parts . Journal of Advanced Joining Processes . Published online 2020. doi:https://doi.org/10.1016/j.jajp.2020.100038
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 30706
Steinfelder C, Brosius A. A New Approach for the Evaluation of Component and Joint Loads Based on Load Path Analysis. Lecture Notes in Production Engineering. Published online 2020:134-141. doi:10.1007/978-3-662-62138-7_14
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 30704
Böhm H, Zhang H, Gröger B, Hornig A, Gude M. Characterization and Numerical Modelling of Through-Thickness Metallic-Pin-Reinforced Fibre/Thermoplastic Composites under Bending Loading. Journal of Composites Science. 2020;4:188. doi:10.3390/jcs4040188
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 30707
Sadeghian B, Guilleaume C, Lafarge R, Brosius A. Investigation of Clinched Joints – A Finite Element Simulation of a Non-destructive Approach. Lecture Notes in Production Engineering. Published online 2020:116-124. doi:10.1007/978-3-662-62138-7_12
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 30711
Ewenz L, Schettler S, Zeuner AT, Zimmermann M. Untersuchungen zum Einfluss von Geometrieparametern bei artgleichen Al-Clinchverbindungen auf das Ermüdungsverhalten im Bereich hoher bis sehr hoher Lastspielzahlen. Tagung Werkstoffprüfung 2020 Werkstoffe und Bauteile auf dem Prüfstand Prüftechnik - Kennwertermit. Published online 2020. doi:10.48447/WP-2020-039
LibreCat
| DOI
2020 | Book Chapter | LibreCat-ID: 24575
Grydin O, Stolbchenko M, Schaper M. Influence of Nozzle Shape on Near-Surface Segregation Formation During Twin-Roll Casting of Aluminum Strips. In: Light Metals 2020. ; 2020:1039-1044. doi:10.1007/978-3-030-36408-3_141
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 30712
Köhler D, Gröger B, Kupfer R, Hornig A, Gude M. Experimental and Numerical Studies on the Deformation of a Flexible Wire in an Injection Moulding Process. Procedia Manufacturing. 2020;47:940-947. doi:10.1016/j.promfg.2020.04.288
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 30710
Zirngibl C, Schleich B, Wartzack S. Potentiale datengestützter Methoden zur Gestaltung und Optimierung mechanischer Fügeverbindungen. Proceedings of the 31st Symposium Design for X (DFX2020). Published online 2020. doi:10.35199/dfx2020.8
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 30709
Köhler D, Kupfer R, Gude M. Clinching in in-situ CT—A numerical study on suitable tool materials. Journal of Advanced Joining Processes. 2020;2:100034. doi:10.1016/j.jajp.2020.100034
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 30703
Kraus M, Merklein M. Potential of Joining Dissimilar Materials by Cold Formed Pin-Structures. Journal of Materials Processing Technology. 2020;283:116697. doi:10.1016/j.jmatprotec.2020.116697
LibreCat
| DOI
2020 | Conference Abstract | LibreCat-ID: 20344 | 
Bielak CR, Böhnke M, Bobbert M, Meschut G. Development of a numerical method for analyzing the robustness of clinching in versatile process chains.
LibreCat
| Files available
2020 | Journal Article | LibreCat-ID: 30721
Wituschek S, Kuball CM, Merklein M, Lechner M. Test Method for Friction Characterization of Rivets. Defect and Diffusion Forum. 2020;404:132-137. doi:10.4028/www.scientific.net/ddf.404.132
LibreCat
| DOI
2020 | Conference Paper | LibreCat-ID: 23980
Weiß D, Schramm B, Kullmer G. Development of a special specimen geometry for the experimental determination of fracture mechanical parameters of clinchable metal sheets. 2020;28:2335-2341. doi:10.1016/j.prostr.2020.11.081
LibreCat
| DOI
2020 | Conference Abstract | LibreCat-ID: 23982
Weiß D, Schramm B, Kullmer G. Experimental and numerical preliminary investigations of the base material and preformed components regarding fatigue crack growth in joined structures. In: ; 2020.
LibreCat
2020 | Conference Paper | LibreCat-ID: 20680
Kappe F, Wituschek S, Lechner M, Bobbert M, Meschut G, Merklein M. Investigation of influencing parameters on the joint formation of the self-piercing riveting process. In: ; 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 16859 |
Martin S, Camberg AA, Tröster T. Probability Distribution of Joint Point Loadings in Car Body Structures under Global Bending and Torsion. Procedia Manufacturing. Published online 2020:419-424. doi:10.1016/j.promfg.2020.04.324
LibreCat
| DOI
| Download (ext.)
2020 | Journal Article | LibreCat-ID: 30713
Rostek T, Wiens E, Homberg W. Joining with Versatile Friction-Spun Joint Connectors. Procedia Manufacturing. 2020;47:395-399. doi:10.1016/j.promfg.2020.04.313
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 51203
Köhler D, Kupfer R, Gude M. Clinching in in-situ CT—A numerical study on suitable tool materials. Journal of Advanced Joining Processes. 2020;2. doi:10.1016/j.jajp.2020.100034
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30647
Friedlein J, Wituschek S, Lechner M, Mergheim J, Steinmann P. Inverse parameter identification of an anisotropic plasticity model for sheet metal. IOP Conference Series: Materials Science and Engineering. 2021;1157:012004. doi:10.1088/1757-899X/1157/1/012004
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30645
Popp J, Wolf M, Mattner T, Drummer D. Energy direction in ultrasonic impregnation of continuous fiber-reinforced thermoplastics. Journal of Composites Science. 2021;5:239. doi:10.3390/jcs5090239
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30643
Kalich J, Füssel U. Influence of the production process on the binding mechanism of clinched aluminum steel mixed compounds. Journal of Manufacturing and Materials Processing. 2021;5:105. doi:10.3390/jmmp5040105
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30644
Pivovarov D, Mergheim J, Willner K, Steinmann P. Stochastic local FEM for computational homogenization of heterogeneous materials exhibiting large plastic deformations. Computational Mechanics. Published online 2021. doi:10.1007/s00466-021-02099-x
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30642
Friedlein J, Mergheim J, Steinmann P. Anisotropic plasticity‐damage material model for sheet metal — Regularised single surface formulation. PAMM. 2021;21. doi:10.1002/pamm.202100068
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 20807 |
Bielak CR, Böhnke M, Bobbert M, Meschut G. Further development of a numerical method for analyzing the load capacity of clinched joints in versatile process chains. doi:10.25518/esaform21.4298
LibreCat
| DOI
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 30650
Römisch D, Zirngibl C, Schleich B, Wartzack S, Merklein M. Data-driven analysis of cold-formed pin structure characteristics in the context of versatile joining processes. IOP Conference Series: Materials Science and Engineering. 2021;1157:012077. doi:10.1088/1757-899X/1157/1/012077
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30648
Steinfelder C, Kalich J, Brosius A, Füssel U. Numerical and experimental investigation of the transmission moment of clinching points. IOP Conference Series: Materials Science and Engineering. 2021;1157:012003. doi:10.1088/1757-899x/1157/1/012003
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30653
Popp J, Kleffel T, Römisch D, Papke T, Merklein M, Drummer D. Fiber Orientation Mechanism of Continuous Fiber Reinforced Thermoplastics Hybrid Parts Joined with Metallic Pins. Applied Composite Materials. 2021;28:951–972. doi:10.1007/s10443-021-09892-0
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30652
Gröger B, Troschitz J, Vorderbrüggen J, et al. Clinching of Thermoplastic Composites and Metals—A Comparison of Three Novel Joining Technologies. Materials. 2021;14:2286. doi:10.3390/ma14092286X
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30662
Busch M, Hausotte T. Determination of the Interface Structural Resolution of an Industrial X-Ray Computed Tomograph Using a Spherical Specimen and a Gap Specimen Consisting of Gauge Blocks. Key Engineering Materials. 2021;883:41-48. doi:10.4028/www.scientific.net/kem.883.41
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30659
Köhler D, Kupfer R, Troschitz J, Gude M. Clinching in In-situ CT – Experimental Study on Suitable Tool Materials. ESAFORM 2021. Published online 2021. doi:10.25518/esaform21.2781
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30661
Köhler D, Kupfer R, Troschitz J, Gude M. In Situ Computed Tomography—Analysis of a Single-Lap Shear Test with Clinch Points. Materials. 2021;14:1859. doi:10.3390/ma14081859
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30719
Wituschek S, Lechner M. Friction Characterisation for a Tumbling Self-Piercing Riveting Process. Key Engineering Materials. 2021;883:27-34. doi:10.4028/www.scientific.net/kem.883.27
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30649
Wischer C, Steinfelder C, Homberg W, Brosius A. Joining with Friction Spun Joint Connectors – Manufacturing and Analysis. IOP Conference Series: Materials Science and Engineering. 2021;1157:012007. doi:10.1088/1757-899x/1157/1/012007
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30702
Wischer C, Homberg W. A contribution on versatile process chains: joining with adaptive joining elements, formed by friction spinning. Production Engineering. Published online 2021. doi:10.1007/s11740-021-01094-8
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30680
Weiß D, Schramm B, Kullmer G. Numerical and Experimental Fracture Mechanical Investigations of Clinchable Sheet Metals Made of HCT590X. Key Engineering Materials. 2021;883:127-132. doi:10.4028/www.scientific.net/kem.883.127
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30698
Gröger B, Köhler D, Vorderbrüggen J, et al. Computed tomography investigation of the material structure in clinch joints in aluminium fibre-reinforced thermoplastic sheets. Production Engineering. Published online 2021. doi:10.1007/s11740-021-01091-x
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30699
Weiß D, Schramm B, Kullmer G. Holistic investigation chain for the experimental determination of fracture mechanical material parameters with special specimens. Production Engineering. Published online 2021. doi:10.1007/s11740-021-01096-6
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30696
Zirngibl C, Schleich B, Wartzack S. Approach for the automated and data-based design of mechanical joints. Proceedings of the Design Society. 2021;1:521. doi:10.1017/pds.2021.52
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30700
Zirngibl C, Dworschak F, Schleich B, Wartzack S. Application of reinforcement learning for the optimization of clinch joint characteristics. Production Engineering. Published online 2021. doi:10.1007/s11740-021-01098-4
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30701
Römisch D, Popp J, Drummer D, Merklein M. Joining of CFRT-steel hybrid parts via hole-forming and subsequent pin caulking. Production Engineering. Published online 2021. doi:10.1007/s11740-021-01093-9
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30697
Lafarge R, Wolf A, Guilleaume C, Brosius A. A New Non-destructive Testing Method Applied to Clinching. Minerals, Metals and Materials Series. Published online 2021:1461. doi:10.1007/978-3-030-75381-8_121
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30684
Römisch D, Kraus M, Merklein M. Experimental study on joining by forming of hct590x + z and en-aw 6014 sheets using cold extruded pin structures. Journal of Manufacturing and Materials Processing. 2021;5:25. doi:10.3390/jmmp5010025
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30682
Römisch D, Kraus M, Merklein M. Investigation of Different Joining by Forming Strategies when Connecting Different Metals without Auxiliary Elements. Key Engineering Materials. 2021;883:19-26. doi:10.4028/www.scientific.net/kem.883.19
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30718
Wituschek S, Lechner M. Material characterisation methods for a tumbling self-piercing riveting process. ESAFORM 2021. Published online 2021. doi:10.25518/esaform21.398
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30683
Köhler D, Sadeghian B, Kupfer R, Troschitz J, Gude M, Brosius A. A Method for Characterization of Geometric Deviations in Clinch Points with Computed Tomography and Transient Dynamic Analysis. Key Engineering Materials. 2021;883:89-96. doi:10.4028/www.scientific.net/kem.883.89
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30663
Ewenz L, Kalich J, Zimmermann M, Füssel U. Effect of Different Tool Geometries on the Mechanical Properties of Al-Al Clinch Joints. Key Engineering Materials. 2021;883:65-72. doi:10.4028/www.scientific.net/kem.883.65
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30688
Gröger B, Hornig A, Hoog A, Gude M. Modelling of thermally supported clinching of fibre-reinforced thermoplastics: Approaches on mesoscale considering large deformations and fibre failure. ESAFORM 2021 - 24th International Conference on Material Forming. Published online 2021. doi:10.25518/esaform21.4293
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30685
Wiens E, Wischer C, Homberg W. Development of a novel adaptive joining technology employing friction-spun joint connectors (FSJC). ESAFORM. Published online 2021:4682. doi:10.25518/esaform21.4682
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30664
Harzheim S, Steinfelder C, Wallmersperger T, Brosius A. A First Approach for the Treatment of Galvanic Corrosion and of Load-Bearing Capacity of Clinched Joints. Key Engineering Materials. 2021;883:97-104. doi:10.4028/www.scientific.net/kem.883.97
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30694
Friedlein J, Mergheim J, Steinmann P. A finite plasticity gradient-damage model for sheet metals during forming and clinching. Key Engineering Materials. 2021;883 KEM:57. doi:10.4028/www.scientific.net/KEM.883.57
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30689
Gröger B, Hornig A, Hoog A, Gude M. Temperature dependent modelling of fibre-reinforced thermoplastic organo-sheet material for forming and joining process simulations. Key Engineering Materials. 2021;883 KEM:49. doi:10.4028/www.scientific.net/KEM.883.49
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30720
Hofmann M, Shi Y, Wallmersperger T. A first Model of Fatigue Corrosion of a Metal through Hydrogen Embrittlement. PAMM. 2021;20. doi:10.1002/pamm.202000122
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30695
Zirngibl C, Schleich B. Approach for the automated analysis of geometrical clinch joint characteristics. Key Engineering Materials. 2021;883 KEM:105. doi:10.4028/www.scientific.net/KEM.883.105
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 34208
Pivovarov D, Mergheim J, Willner K, Steinmann P. Parametric FEM for computational homogenization of heterogeneous materials with random voids. In: PAMM. Vol 20. Wiley; 2021. doi:10.1002/pamm.202000071
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 25556 |
Böhnke M, Rossel MS, Bielak CR, Bobbert M, Meschut G. Concept development of a method for identifying friction coefficients for the numerical simulation of clinching processes. The International Journal of Advanced Manufacturing Technology. Published online 2021. doi:10.1007/s00170-021-07986-4
LibreCat
| DOI
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 38517
Popp J, Kleffel T, Drummer D. Influence of pin geometry on the joint strength of CFRT-metal hybrid parts with metallic pins. Joining Plastics. 2021;15(3-4).
LibreCat
2021 | Conference Paper | LibreCat-ID: 34472
Kullmer G, Weiß D, Schramm B. Entwicklung einer Methode zur differenzierten Messung des Wachstums der Rissenden von Innenrissen mit der Elektropotentialmethode. In: Vol DVM-Bericht 253. ; 2021:107-116. doi:10.48447/BR-2021-013
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 24006
Weiß D, Schramm B, Neuser M, Grydin O, Kullmer G. Experimentelle bruchmechanische Untersuchung eines clinchgeeigneten Bleches aus HCT590X mithilfe einer neuen Probengeometrie. In: Vol DVM-Bericht 253. ; 2021:231-240. doi:10.48447/BR-2021-025
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 34227
Rossel MS, Böhnke M, Bielak CR, Bobbert M, Meschut G. Development of a Method for the Identification of Friction Coefficients in Sheet Metal Materials for the Numerical Simulation of Clinching Processes. Key Engineering Materials. 2021;883:81-88. doi:10.4028/www.scientific.net/kem.883.81
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 34222
Kappe F, Bielak CR, Sartisson V, Bobbert M, Meschut G. Influence of rivet length on joint formation on self-piercing riveting process considering further process parameters. In: ESAFORM 2021. University of Liege; 2021. doi:10.25518/esaform21.4277
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 22798
Böhnke M, Kappe F, Bobbert M, Meschut G. Influence of various procedures for the determination of flow curves on the predictive accuracy of numerical simulations for mechanical joining processes. Materials Testing. 2021;63(6):493-500. doi:10.1515/mt-2020-0082
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 34226
Kappe F, Bobbert M, Meschut G. New Approach for Versatile Self Piercing Riveting: Joining System and Auxiliary Part. Key Engineering Materials. 2021;883:3-10. doi:10.4028/www.scientific.net/kem.883.3
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 30200
Wituschek S, Kappe F, Lechner M. Investigation of the influence of varying tumbling strategies on a tumbling self-piercing riveting process. Production Engineering. Published online 2021. doi:10.1007/s11740-021-01099-3
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 24541
Steinfelder C, Martin S, Brosius A, Tröster T. Load Path Transmission in Joining Elements. Key Engineering Materials. Published online 2021:73-80. doi:10.4028/www.scientific.net/kem.883.73
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 24548 |
Martin S, Tröster T. Joint point loadings in car bodies – the influence of manufacturing tolerances and scatter in material properties. ESAFORM 2021. Published online 2021. doi:10.25518/esaform21.3801
LibreCat
| DOI
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 26082
Wischer C, Wiens E, Homberg W. Joining with versatile joining elements formed by friction spinning. Journal of Advanced Joining Processes. 2021;3. doi:10.1016/j.jajp.2021.100060
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 51202
Köhler D, Sadeghian B, Kupfer R, Troschitz J, Gude M, Brosius A. A Method for Characterization of Geometric Deviations in Clinch Points with Computed Tomography and Transient Dynamic Analysis. Key Engineering Materials. 2021;883:89-96. doi:10.4028/www.scientific.net/kem.883.89
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 51199
Gröger B, Köhler D, Vorderbrüggen J, et al. Computed tomography investigation of the material structure in clinch joints in aluminium fibre-reinforced thermoplastic sheets. Production Engineering. 2021;16(2-3):203-212. doi:10.1007/s11740-021-01091-x
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 51200
Köhler D, Kupfer R, Troschitz J, Gude M. In Situ Computed Tomography—Analysis of a Single-Lap Shear Test with Clinch Points. Materials. 2021;14(8). doi:10.3390/ma14081859
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 51201
Köhler D, Kupfer R, Troschitz J, Gude M. Clinching in In-situ CT – Experimental Study on Suitable Tool Materials. ESAFORM 2021. Published online 2021. doi:10.25518/esaform21.2781
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 51198
Köhler D, Sadeghian B, Troschitz J, Kupfer R, Gude M, Brosius A. Characterisation of lateral offsets in clinch points with computed tomography and transient dynamic analysis. Journal of Advanced Joining Processes. 2021;5. doi:10.1016/j.jajp.2021.100089
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 29293 |
Martin S, Schütte J, Bäumler C, Sextro W, Tröster T. Identification of joints for a load-adapted shape in a body in white using steady state vehicle simulations. Forces in Mechanics. 2021;6. doi:10.1016/j.finmec.2021.100065
LibreCat
| DOI
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 24535
Neuser M, Grydin O, Andreiev A, Schaper M. Effect of Solidification Rates at Sand Casting on the Mechanical Joinability of a Cast Aluminium Alloy. Metals. Published online 2021. doi:10.3390/met11081304
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 24537
Neuser M, Kappe F, Busch M, et al. Joining suitability of cast aluminium for self-piercing riveting. IOP Conference Series: Materials Science and Engineering. Published online 2021. doi:10.1088/1757-899x/1157/1/012005
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34207
Neuser M, Kappe F, Ostermeier J, et al. Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting. Advanced Engineering Materials. 2022;24(10). doi:10.1002/adem.202200874
LibreCat
| DOI
2022 | Book Chapter | LibreCat-ID: 34211
Friedlein J, Mergheim J, Steinmann P. Influence of Kinematic Hardening on Clinch Joining of Dual-Phase Steel HCT590X Sheet Metal. In: The Minerals, Metals & Materials Series. Springer International Publishing; 2022. doi:10.1007/978-3-031-06212-4_31
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34213
Ewenz L, Bielak CR, Otroshi M, Bobbert M, Meschut G, Zimmermann M. Numerical and experimental identification of fatigue crack initiation sites in clinched joints. Production Engineering. 2022;16(2-3):305-313. doi:10.1007/s11740-022-01124-z
LibreCat
| DOI
2022 | Book Chapter | LibreCat-ID: 34212
Köhler D, Kupfer R, Troschitz J, Gude M. Clinching in In Situ CT—A Novel Validation Method for Mechanical Joining Processes. In: The Minerals, Metals & Materials Series. Springer International Publishing; 2022. doi:10.1007/978-3-031-06212-4_75
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34219
Römisch D, Kraus M, Merklein M. Investigation of the influence of formed, non-rotationally symmetrical pin geometries and their effect on the joint quality of steel and aluminium sheets by direct pin pressing. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 2022;236(6):1187-1202. doi:10.1177/14644207221081408
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34223
Popp J, Römisch D, Merklein M, Drummer D. Joining of CFRT/Steel Hybrid Parts via Direct Pressing of Cold Formed Non-Rotational Symmetric Pin Structures. Applied Sciences. 2022;12(10). doi:10.3390/app12104962
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34225
Troschitz J, Gröger B, Würfel V, Kupfer R, Gude M. Joining Processes for Fibre-Reinforced Thermoplastics: Phenomena and Characterisation. Materials. 2022;15(15). doi:10.3390/ma15155454
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34221
Binder F, Hausotte T. Über die Abgrenzung von Auflösungskonzepten in der industriellen Computertomografie. tm - Technisches Messen. 2022;89(s1):20-24. doi:10.1515/teme-2022-0065
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34220
Busch M, Butzhammer L, Hausotte T. Herausforderungen bei computertomografischen Untersuchungen von Fügeverbindungen. tm - Technisches Messen. 2022;89(s1):83-88. doi:10.1515/teme-2022-0061
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 34415
Zirngibl C, Sauer C, Schleich B, Wartzack S. Knowledge and Data-Based Design and Dimensioning of Mechanical Joining Connections. In: Volume 2: 42nd Computers and Information in Engineering Conference (CIE). American Society of Mechanical Engineers; 2022. doi:10.1115/detc2022-89172
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34417 |
Zirngibl C, Schleich B, Wartzack S. Estimation of Clinch Joint Characteristics Based on Limited Input Data Using Pre-Trained Metamodels. AI. 2022;3(4):990-1006. doi:10.3390/ai3040059
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 30626
Köhler D, Sadeghian B, Troschitz J, Kupfer R, Gude M, Brosius A. Characterisation of lateral offsets in clinch points with computed tomography and transient dynamic analysis. Journal of Advanced Joining Processes. 2022;5:100089. doi:10.1016/j.jajp.2021.100089
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30625
Popp J, Drummer D. Joining of continuous fiber reinforced thermoplastic/steel hybrid parts via undercutting pin structures and infrared heating. Journal of Advanced Joining Processes. 2022;5:100084. doi:10.1016/j.jajp.2021.100084
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30624
Ewenz L, Kuczyk M, Zimmermann M. Effect of the tool geometry on microstructure and geometrical features of clinched aluminum. Journal of Advanced Joining Processes. 2022;5. doi:10.1016/j.jajp.2021.100091
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30622
Gröger B, Würfel V, Hornig A, Gude M. Forming process induced material structure of fibre-reinforced thermoplastics - Experimental and numerical investigation of a bladder-assisted moulding process. Journal of Advanced Joining Processes. 2022;5. doi:10.1016/j.jajp.2022.100100
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30717
Wituschek S, Lechner M. Investigation of the influence of the tumbling angle on a tumbling self-piercing riveting process. Production Engineering. Published online 2022. doi:10.1177/14644207221080068
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30629
Steinfelder C, Acksteiner J, Guilleaume C, Brosius A. Analysis of the interactions between joint and component properties during clinching. Production Engineering. Published online 2022. doi:10.1007/s11740-021-01102-x
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30640
Busch M, Hausotte T. Application of an edge detection algorithm for surface determination in industrial X-ray computed tomography. Production Engineering. Published online 2022. doi:10.1007/s11740-021-01100-z
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30628
Kalich J, Füssel U. Design of clinched joints on the basis of binding mechanisms. Production Engineering. Published online 2022. doi:10.1007/s11740-022-01108-z
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30627
Friedlein J, Mergheim J, Steinmann P. Observations on additive plasticity in the logarithmic strain space at excessive strains. International Journal of Solids and Structures. 2022;239-240:111416. doi:10.1016/j.ijsolstr.2021.111416
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34253 |
Harzheim S, Ewenz L, Zimmermann M, Wallmersperger T. Corrosion Phenomena and Fatigue Behavior of Clinched Joints: Numerical and Experimental Investigations. Journal of Advanced Joining Processes. 2022;6. doi:10.1016/j.jajp.2022.100130
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 34252 |
Zeuner AT, Ewenz L, Kalich J, Schöne S, Füssel U, Zimmermann M. The Influence of Heat Treatment on the Microstructure, Surface Roughness and Shear Tensile Strength of AISI 304 Clinch Joints. Metals. 2022;12(9). doi:10.3390/met12091514
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 34249 |
Römisch D, Zirngibl C, Schleich B, Wartzack S, Merklein M. Robustness Analysis of Pin Joining. Journal of Manufacturing and Materials Processing. 2022;6(5). doi:10.3390/jmmp6050122
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 34255 |
Borowski A, Gröger B, Füßel R, Gude M. Characterisation of Fibre Bundle Deformation Behaviour—Test Rig, Results and Conclusions. Journal of Manufacturing and Materials Processing. 2022;6(6). doi:10.3390/jmmp6060146
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 34248 |
Römisch D, Hetzel A, Wituschek S, Lechner M, Merklein M. Pin Extrusion for Mechanical Joining from Orbital Formed Tailored Blanks with Local Material Pre-Distribution. Journal of Manufacturing and Materials Processing. 2022;6(6). doi:10.3390/jmmp6060127
LibreCat
| DOI
| Download (ext.)